Loading arch/arm/boot/dts/qcom/Makefile +7 −1 Original line number Diff line number Diff line Loading @@ -51,7 +51,13 @@ dtb-$(CONFIG_ARCH_MSM8916) += msm8916-sim.dtb \ msm8939-cdp-smb1360.dtb \ msm8939-mtp.dtb \ msm8939-mtp-smb1360.dtb \ msm8939-mtp-wcd9306.dtb msm8939-mtp-wcd9306.dtb \ msm8936-qrd-skuk.dtb \ msm8936-cdp.dtb \ msm8936-cdp-smb1360.dtb \ msm8936-mtp.dtb \ msm8936-mtp-smb1360.dtb \ msm8936-mtp-wcd9306.dtb dtb-$(CONFIG_ARCH_MSM8226) += msm8226-sim.dtb \ msm8226-fluid.dtb \ msm8226-v1-cdp.dtb \ Loading arch/arm/boot/dts/qcom/msm8936-cdp-smb1360.dts 0 → 100644 +50 −0 Original line number Diff line number Diff line /* Copyright (c) 2014, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "msm8936.dtsi" #include "msm8939-cdp.dtsi" / { model = "Qualcomm Technologies, Inc. MSM 8936 SMB1360 CDP"; compatible = "qcom,msm8936-cdp", "qcom,msm8936", "qcom,cdp"; qcom,board-id = <1 1>; }; &i2c_4 { smb1360_otg_supply: smb1360-chg-fg@14 { compatible = "qcom,smb1360-chg-fg"; reg = <0x14>; interrupt-parent = <&msm_gpio>; interrupts = <62 8>; pinctrl-names = "default"; pinctrl-0 = <&smb_int_default>; qcom,charging-disabled; qcom,chg-inhibit-disabled; qcom,float-voltage-mv = <4200>; qcom,iterm-ma = <100>; qcom,recharge-thresh-mv = <100>; qcom,thermal-mitigation = <1500 700 600 0>; regulator-name = "smb1360_otg_vreg"; }; }; &pm8916_chg { status = "ok"; qcom,use-external-charger; }; &pm8916_bms { status = "ok"; qcom,disable-bms; }; arch/arm/boot/dts/qcom/msm8936-cdp.dts 0 → 100644 +22 −0 Original line number Diff line number Diff line /* Copyright (c) 2014, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "msm8936.dtsi" #include "msm8939-cdp.dtsi" / { model = "Qualcomm Technologies, Inc. MSM 8936 CDP"; compatible = "qcom,msm8936-cdp", "qcom,msm8936", "qcom,cdp"; qcom,board-id = <1 0>; }; arch/arm/boot/dts/qcom/msm8936-cpu.dtsi 0 → 100644 +86 −0 Original line number Diff line number Diff line /* Copyright (c) 2014, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ / { cpus { #address-cells = <1>; #size-cells = <0>; CPU0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; enable-method = "qcom,arm-cortex-acc"; qcom,acc = <&acc0>; next-level-cache = <&L2_1>; L2_1: l2-cache { compatible = "arm,arch-cache"; cache-level = <2>; power-domain = <&l2ccc_1>; }; }; CPU1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x1>; enable-method = "qcom,arm-cortex-acc"; qcom,acc = <&acc1>; next-level-cache = <&L2_1>; }; CPU2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x2>; enable-method = "qcom,arm-cortex-acc"; qcom,acc = <&acc2>; next-level-cache = <&L2_1>; }; CPU3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x3>; enable-method = "qcom,arm-cortex-acc"; qcom,acc = <&acc3>; next-level-cache = <&L2_1>; }; }; }; &soc { l2ccc_1: clock-controller@b011000 { compatible = "qcom,8916-l2ccc"; reg = <0x0b011000 0x1000>; }; acc0:clock-controller@b088000 { compatible = "qcom,arm-cortex-acc"; reg = <0x0b088000 0x1000>; }; acc1:clock-controller@b098000 { compatible = "qcom,arm-cortex-acc"; reg = <0x0b098000 0x1000>; }; acc2:clock-controller@b0a8000 { compatible = "qcom,arm-cortex-acc"; reg = <0x0b0a8000 0x1000>; }; acc3:clock-controller@b0b8000 { compatible = "qcom,arm-cortex-acc"; reg = <0x0b0b8000 0x1000>; }; }; arch/arm/boot/dts/qcom/msm8936-mtp-smb1360.dts 0 → 100644 +58 −0 Original line number Diff line number Diff line /* Copyright (c) 2014, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "msm8936.dtsi" #include "msm8939-mtp.dtsi" / { model = "Qualcomm Technologies, Inc. MSM 8936 SMB1360 MTP"; compatible = "qcom,msm8936-mtp", "qcom,msm8936", "qcom,mtp"; qcom,board-id = <8 0>; }; &i2c_4 { smb1360_otg_supply: smb1360-chg-fg@14 { compatible = "qcom,smb1360-chg-fg"; reg = <0x14>; interrupt-parent = <&msm_gpio>; interrupts = <62 8>; pinctrl-names = "default"; pinctrl-0 = <&smb_int_default>; qcom,charging-disabled; qcom,chg-inhibit-disabled; qcom,float-voltage-mv = <4200>; qcom,iterm-ma = <100>; qcom,recharge-thresh-mv = <100>; qcom,thermal-mitigation = <1500 700 600 0>; regulator-name = "smb1360_otg_vreg"; }; }; &pm8916_chg { status = "ok"; qcom,use-external-charger; }; &pm8916_bms { status = "ok"; qcom,disable-bms; }; &usb_otg { qcom,hsusb-otg-mode = <3>; qcom,usbid-gpio = <&msm_gpio 110 0>; pinctrl-names = "default"; pinctrl-0 = <&usbid_default>; vbus_otg-supply = <&smb1360_otg_supply>; }; Loading
arch/arm/boot/dts/qcom/Makefile +7 −1 Original line number Diff line number Diff line Loading @@ -51,7 +51,13 @@ dtb-$(CONFIG_ARCH_MSM8916) += msm8916-sim.dtb \ msm8939-cdp-smb1360.dtb \ msm8939-mtp.dtb \ msm8939-mtp-smb1360.dtb \ msm8939-mtp-wcd9306.dtb msm8939-mtp-wcd9306.dtb \ msm8936-qrd-skuk.dtb \ msm8936-cdp.dtb \ msm8936-cdp-smb1360.dtb \ msm8936-mtp.dtb \ msm8936-mtp-smb1360.dtb \ msm8936-mtp-wcd9306.dtb dtb-$(CONFIG_ARCH_MSM8226) += msm8226-sim.dtb \ msm8226-fluid.dtb \ msm8226-v1-cdp.dtb \ Loading
arch/arm/boot/dts/qcom/msm8936-cdp-smb1360.dts 0 → 100644 +50 −0 Original line number Diff line number Diff line /* Copyright (c) 2014, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "msm8936.dtsi" #include "msm8939-cdp.dtsi" / { model = "Qualcomm Technologies, Inc. MSM 8936 SMB1360 CDP"; compatible = "qcom,msm8936-cdp", "qcom,msm8936", "qcom,cdp"; qcom,board-id = <1 1>; }; &i2c_4 { smb1360_otg_supply: smb1360-chg-fg@14 { compatible = "qcom,smb1360-chg-fg"; reg = <0x14>; interrupt-parent = <&msm_gpio>; interrupts = <62 8>; pinctrl-names = "default"; pinctrl-0 = <&smb_int_default>; qcom,charging-disabled; qcom,chg-inhibit-disabled; qcom,float-voltage-mv = <4200>; qcom,iterm-ma = <100>; qcom,recharge-thresh-mv = <100>; qcom,thermal-mitigation = <1500 700 600 0>; regulator-name = "smb1360_otg_vreg"; }; }; &pm8916_chg { status = "ok"; qcom,use-external-charger; }; &pm8916_bms { status = "ok"; qcom,disable-bms; };
arch/arm/boot/dts/qcom/msm8936-cdp.dts 0 → 100644 +22 −0 Original line number Diff line number Diff line /* Copyright (c) 2014, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "msm8936.dtsi" #include "msm8939-cdp.dtsi" / { model = "Qualcomm Technologies, Inc. MSM 8936 CDP"; compatible = "qcom,msm8936-cdp", "qcom,msm8936", "qcom,cdp"; qcom,board-id = <1 0>; };
arch/arm/boot/dts/qcom/msm8936-cpu.dtsi 0 → 100644 +86 −0 Original line number Diff line number Diff line /* Copyright (c) 2014, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ / { cpus { #address-cells = <1>; #size-cells = <0>; CPU0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; enable-method = "qcom,arm-cortex-acc"; qcom,acc = <&acc0>; next-level-cache = <&L2_1>; L2_1: l2-cache { compatible = "arm,arch-cache"; cache-level = <2>; power-domain = <&l2ccc_1>; }; }; CPU1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x1>; enable-method = "qcom,arm-cortex-acc"; qcom,acc = <&acc1>; next-level-cache = <&L2_1>; }; CPU2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x2>; enable-method = "qcom,arm-cortex-acc"; qcom,acc = <&acc2>; next-level-cache = <&L2_1>; }; CPU3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x3>; enable-method = "qcom,arm-cortex-acc"; qcom,acc = <&acc3>; next-level-cache = <&L2_1>; }; }; }; &soc { l2ccc_1: clock-controller@b011000 { compatible = "qcom,8916-l2ccc"; reg = <0x0b011000 0x1000>; }; acc0:clock-controller@b088000 { compatible = "qcom,arm-cortex-acc"; reg = <0x0b088000 0x1000>; }; acc1:clock-controller@b098000 { compatible = "qcom,arm-cortex-acc"; reg = <0x0b098000 0x1000>; }; acc2:clock-controller@b0a8000 { compatible = "qcom,arm-cortex-acc"; reg = <0x0b0a8000 0x1000>; }; acc3:clock-controller@b0b8000 { compatible = "qcom,arm-cortex-acc"; reg = <0x0b0b8000 0x1000>; }; };
arch/arm/boot/dts/qcom/msm8936-mtp-smb1360.dts 0 → 100644 +58 −0 Original line number Diff line number Diff line /* Copyright (c) 2014, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "msm8936.dtsi" #include "msm8939-mtp.dtsi" / { model = "Qualcomm Technologies, Inc. MSM 8936 SMB1360 MTP"; compatible = "qcom,msm8936-mtp", "qcom,msm8936", "qcom,mtp"; qcom,board-id = <8 0>; }; &i2c_4 { smb1360_otg_supply: smb1360-chg-fg@14 { compatible = "qcom,smb1360-chg-fg"; reg = <0x14>; interrupt-parent = <&msm_gpio>; interrupts = <62 8>; pinctrl-names = "default"; pinctrl-0 = <&smb_int_default>; qcom,charging-disabled; qcom,chg-inhibit-disabled; qcom,float-voltage-mv = <4200>; qcom,iterm-ma = <100>; qcom,recharge-thresh-mv = <100>; qcom,thermal-mitigation = <1500 700 600 0>; regulator-name = "smb1360_otg_vreg"; }; }; &pm8916_chg { status = "ok"; qcom,use-external-charger; }; &pm8916_bms { status = "ok"; qcom,disable-bms; }; &usb_otg { qcom,hsusb-otg-mode = <3>; qcom,usbid-gpio = <&msm_gpio 110 0>; pinctrl-names = "default"; pinctrl-0 = <&usbid_default>; vbus_otg-supply = <&smb1360_otg_supply>; };
