Merge "ARM: dts: msm: Add firmware update fields for 8226 qrd" (abc81f97) · Commits · e / devices / android_kernel_sony_msm8994

Documentation/devicetree/bindings/input/touchscreen/ft5x06-ts.txt

+15 −11

Original line number	Diff line number	Diff line
		@@ -23,30 +23,34 @@ Required properties:
		- focaltech,display-coords : display coordinates in pixels. It is a four
		tuple consisting of min x, min y, max x and
		max y values
		- focaltech,name : name of the controller
		- focaltech,group-id : group id of this device
		- focaltech,num-max-touches : maximum number of touches supported
		- focaltech,hard-reset-delay-ms : hard reset delay in ms
		- focaltech,soft-reset-delay-ms : soft reset delay in ms
		- focaltech,fw-delay-aa-ms : specify the delay in ms after programming 0xaa
		register for firmware upgrade
		- focaltech,fw-delay-55-ms : specify the delay in ms after programming 0x55
		register for firmware upgrade
		- focaltech,fw-upgrade-id1 : specify the upgrade id1 for firmware upgrade
		- focaltech,fw-upgrade-id2 : specify the upgrade id2 for firmware upgrade
		- focaltech,fw-delay-readid-ms : specify the read id delay in ms for firmware upgrade
		- focaltech,fw-delay-era-flsh-ms : specify the erase flash delay in ms for firmware upgrade

		Optional properties:

		- focaltech,panel-coords : panel coordinates for the chip in pixels.
		It is a four tuple consisting of min x,
		min y, max x and max y values
		- focaltech,name : name of the controller
		- focaltech,i2c-pull-up : to specify pull up is required
		- focaltech,no-force-update : to specify force update is allowed
		- focaltech,button-map : button map of key codes. The number
		- focaltech,fw-vkey-support : specify if virtual keys are supported through firmware
		of key codes depend on panel
		- focaltech,fw-name : specify the firmware file name
		- focaltech,fw-delay-aa-ms : specify the "aa" delay in ms for firmware upgrade
		- focaltech,fw-delay-55-ms : specify the "55" delay in ms for firmware upgrade
		- focaltech,fw-upgrade-id1 : specify the upgrade id1 for firmware upgrade
		- focaltech,fw-upgrade-id2 : specify the upgrade id2 for firmware upgrade
		- focaltech,fw-delay-readid-ms : specify the read id delay in ms for firmware upgrade
		- focaltech,fw-delay-era-flsh-ms : specify the erase flash delay in ms for firmware upgrade
		- focaltech,fw-auto-cal : specify whether calibration is needed after firmware upgrade
		- focaltech,fw-vkey-support : specify if virtual keys are supported through firmware
		- focaltech,ignore-id-check : specify ignore family-id check
		- focaltech,panel-coords : panel coordinates for the chip in pixels.
		It is a four tuple consisting of min x,
		min y, max x and max y values
		- focaltech,fw-name : specify the firmware file name

		Example:
		i2c@f9923000{

arch/arm/boot/dts/msm8226-qrd.dtsi

+12 −0

Original line number	Diff line number	Diff line
		@@ -40,6 +40,7 @@
		interrupts = <17 0x2>;
		vdd-supply = <&pm8226_l19>;
		vcc_i2c-supply = <&pm8226_lvs1>;
		focaltech,name = "ft5x06";
		focaltech,family-id = <0x55>;
		focaltech,reset-gpio = <&msmgpio 16 0x00>;
		focaltech,irq-gpio = <&msmgpio 17 0x00>;
		@@ -48,6 +49,17 @@
		focaltech,button-map= <139 102 158>;
		focaltech,no-force-update;
		focaltech,i2c-pull-up;
		focaltech,group-id = <1>;
		focaltech,hard-reset-delay-ms = <20>;
		focaltech,soft-reset-delay-ms = <150>;
		focaltech,num-max-touches = <5>;
		focaltech,fw-name = "ft_8226_qrd_1080p_fw.bin";
		focaltech,fw-delay-aa-ms = <50>;
		focaltech,fw-delay-55-ms = <30>;
		focaltech,fw-upgrade-id1 = <0x79>;
		focaltech,fw-upgrade-id2 = <0x03>;
		focaltech,fw-delay-readid-ms = <10>;
		focaltech,fw-delay-era-flsh-ms = <2000>;
		};
		};