Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit a7cf29d8 authored by Krishna Konda's avatar Krishna Konda Committed by Stepan Moskovchenko
Browse files

ARM: dts: Add sdhc device nodes for apq8084 



Add SDHCi device node information for eMMC and SD card on APQ8084 CDP
and APQ8084 interposer hardware.

Change-Id: If1da91d6df264f3af26544211631ab9f779abbf6
Signed-off-by: default avatarKrishna Konda <kkonda@codeaurora.org>
parent c8167a38

arch/arm/boot/dts/apq8084-cdp.dtsi

+53 −0
Original line number Diff line number Diff line
@@ -103,3 +103,56 @@ 
		qcom,master-en = <1>;

	};

};



&sdhc_1 {

	vdd-supply = <&pma8084_l20>;

	qcom,vdd-voltage-level = <2950000 2950000>;

	qcom,vdd-current-level = <200 500000>;



	vdd-io-supply = <&pma8084_s4>;

	qcom,vdd-io-always-on;

	qcom,vdd-io-voltage-level = <1800000 1800000>;

	qcom,vdd-io-current-level = <200 154000>;



	qcom,pad-pull-on = <0x0 0x3 0x3 0x1>; /* no-pull, pull-up, pull-up, pull-down */

	qcom,pad-pull-off = <0x0 0x3 0x3 0x1>; /* no-pull, pull-up, pull-up, pull-down */

	qcom,pad-drv-on = <0x7 0x4 0x4>; /* 16mA, 10mA, 10mA */

	qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */



	qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 200000000 400000000>;

	qcom,nonremovable;

	qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v";

	status = "ok";

};



&sdhc_2 {

	vdd-supply = <&pma8084_l21>;

	qcom,vdd-voltage-level = <2950000 2950000>;

	qcom,vdd-current-level = <200 800000>;



	vdd-io-supply = <&pma8084_l13>;

	qcom,vdd-io-voltage-level = <1800000 2950000>;

	qcom,vdd-io-current-level = <200 22000>;



	qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */

	qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */

	qcom,pad-drv-on = <0x7 0x4 0x4>; /* 16mA, 10mA, 10mA */

	qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */



	qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 200000000>;

	qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";



	#address-cells = <0>;

	interrupt-parent = <&sdhc_2>;

	interrupts = <0 1 2>;

	#interrupt-cells = <1>;

	interrupt-map-mask = <0xffffffff>;

	interrupt-map = <0 &intc 0 125 0

			1 &intc 0 221 0

			2 &msmgpio 122 0x3>;

	interrupt-names = "hc_irq", "pwr_irq", "status_irq";

	cd-gpios = <&msmgpio 122 0x1>;

	wp-gpios = <&msmgpio 75 0x1>;



	status = "ok";

};

arch/arm/boot/dts/apq8084-interposer-cdp.dts

+52 −0
Original line number Diff line number Diff line
@@ -29,3 +29,55 @@ 
&blsp1_uart1 {

	status = "ok";

};



&sdhc_1 {

	vdd-supply = <&pma8084_l20>;

	qcom,vdd-voltage-level = <2950000 2950000>;

	qcom,vdd-current-level = <200 500000>;



	vdd-io-supply = <&pma8084_s4>;

	qcom,vdd-io-always-on;

	qcom,vdd-io-voltage-level = <1800000 1800000>;

	qcom,vdd-io-current-level = <200 154000>;



	qcom,pad-pull-on = <0x0 0x3 0x3 0x1>; /* no-pull, pull-up, pull-up, pull-down */

	qcom,pad-pull-off = <0x0 0x3 0x3 0x1>; /* no-pull, pull-up, pull-up, pull-down */

	qcom,pad-drv-on = <0x7 0x4 0x4>; /* 16mA, 10mA, 10mA */

	qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */



	qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 200000000 400000000>;

	qcom,nonremovable;

	qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v";



	status = "ok";

};



&sdhc_2 {

	vdd-supply = <&pma8084_l21>;

	qcom,vdd-voltage-level = <2950000 2950000>;

	qcom,vdd-current-level = <200 800000>;



	vdd-io-supply = <&pma8084_l13>;

	qcom,vdd-io-voltage-level = <1800000 2950000>;

	qcom,vdd-io-current-level = <200 22000>;



	qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */

	qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */

	qcom,pad-drv-on = <0x7 0x4 0x4>; /* 16mA, 10mA, 10mA */

	qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */



	qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 200000000>;

	qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";



	#address-cells = <0>;

	interrupt-parent = <&sdhc_2>;

	interrupts = <0 1 2>;

	#interrupt-cells = <1>;

	interrupt-map-mask = <0xffffffff>;

	interrupt-map = <0 &intc 0 125 0

			1 &intc 0 221 0

			2 &msmgpio 62 0x3>;

	interrupt-names = "hc_irq", "pwr_irq", "status_irq";



	status = "ok";

};