Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit a7119dfa authored by Ashay Jaiswal's avatar Ashay Jaiswal
Browse files

ARM: dts: msm: add configs for PMA8084 GPIO/MPP on APQ8084 based devices 



Add configuration tables in order to capture APQ8084 MTP, CDP and LIQUID
specific configurations for PMIC PMA8084 GPIOs and MPPs.

Configure gpio 15, 16, 17 and 18 in DIV_CLK funtion.
Configure gpio 11 as input, it is an interrupt source for USB insertion
detection.
Configure gpio 9 and 20 as outputs, each drives an external regulator chip.
Configure mpp3 as output, it drives the external 5V regulator chip.
Configure mpp7 as output on liquid, it drives the external regulator
used by the gps chip.
Configure gpio 8 as output on liquid, it drives the external regulator
used for OTG.

Change-Id: I86f5d429001b61fc4346bdfe82435efbeb205a39
Signed-off-by: default avatarAbhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: default avatarAshay Jaiswal <ashayj@codeaurora.org>
parent 7078f1ca

arch/arm/boot/dts/apq8084-cdp.dtsi

+65 −41
Original line number Diff line number Diff line
@@ -159,47 +159,6 @@ 
	qcom,setb-gpios-dir =  <2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2>;

};



&pma8084_gpios {

	gpio@c100 { /* GPIO 2 */

		qcom,mode = <0>;

		qcom,pull = <0>;

		qcom,vin-sel = <2>;

		qcom,src-sel = <0>;

	};



	gpio@c400 { /* GPIO 5 */

		qcom,mode = <0>;

		qcom,pull = <0>;

		qcom,vin-sel = <2>;

		qcom,src-sel = <0>;

	};



	gpio@c600 { /* GPIO 7 */

		/* Backlight PWM */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Do not invert the output */

		qcom,vin-sel = <2>;		/* PMA8084 S4 = 1.8 V */

		qcom,src-sel = <2>;		/* Special Function 1 = LPG 3 */

		qcom,out-strength = <3>;	/* High drive strength */

		qcom,master-en = <1>;

	};



	gpio@cd00 { /* GPIO 14 */

		qcom,mode = <0>;

		qcom,pull = <1>;

		qcom,vin-sel = <2>;

		qcom,src-sel = <0>;

	};



	gpio@d400 { /* GPIO 21 */

		qcom,mode = <0>;

		qcom,pull = <0>;

		qcom,vin-sel = <2>;

		qcom,src-sel = <0>;

	};

};



&i2c_0 {

	smb349_otg_supply: smb349-charger@1B {

		compatible = "qcom,smb349-charger";
@@ -273,6 +232,10 @@ 
	};



	gpio@c100 { /* GPIO 2 */

		qcom,mode = <0>;

		qcom,pull = <0>;

		qcom,vin-sel = <2>;

		qcom,src-sel = <0>;

	};



	gpio@c200 { /* GPIO 3 */
@@ -282,24 +245,48 @@ 
	};



	gpio@c400 { /* GPIO 5 */

		qcom,mode = <0>;

		qcom,pull = <0>;

		qcom,vin-sel = <2>;

		qcom,src-sel = <0>;

	};



	gpio@c500 { /* GPIO 6 */

	};



	gpio@c600 { /* GPIO 7 */

		/* Backlight PWM */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Do not invert the output */

		qcom,vin-sel = <2>;		/* PMA8084 S4 = 1.8 V */

		qcom,src-sel = <2>;		/* Special Function 1=LPG 3 */

		qcom,out-strength = <3>;	/* High drive strength */

		qcom,master-en = <1>;

	};



	gpio@c700 { /* GPIO 8 */

	};



	gpio@c800 { /* GPIO 9 */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Do not invert the output */

		qcom,vin-sel = <0>;		/* VPH_PWR */

		qcom,src-sel = <0>;		/* GPIO */

		qcom,out-strength = <1>;	/* High drive strength */

		qcom,master-en = <1>;		/* Enable GPIO */

	};



	gpio@c900 { /* GPIO 10 */

	};



	gpio@ca00 { /* GPIO 11 */

		/* VBUS interrupt */

		qcom,mode = <0>;

		qcom,pull = <1>;

		qcom,vin-sel = <2>;

		qcom,src-sel = <0>;

	};



	gpio@cb00 { /* GPIO 12 */
@@ -309,18 +296,51 @@ 
	};



	gpio@cd00 { /* GPIO 14 */

		/* SMB349 STAT */

		qcom,mode = <0>;

		qcom,pull = <1>;

		qcom,vin-sel = <2>;

		qcom,src-sel = <0>;

	};



	gpio@ce00 { /* GPIO 15 */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Output low initially */

		qcom,vin-sel = <2>;		/* VIN 2 */

		qcom,src-sel = <2>;		/* Function 1 */

		qcom,out-strength = <2>;	/* Medium */

		qcom,master-en = <1>;		/* Enable GPIO */

	};



	gpio@cf00 { /* GPIO 16 */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Output low initially */

		qcom,vin-sel = <2>;		/* VIN 2 */

		qcom,src-sel = <2>;		/* Function 1 */

		qcom,out-strength = <2>;	/* Medium */

		qcom,master-en = <1>;		/* Enable GPIO */

	};



	gpio@d000 { /* GPIO 17 */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Output low initially */

		qcom,vin-sel = <2>;		/* VIN 2 */

		qcom,src-sel = <2>;		/* Function 1 */

		qcom,out-strength = <2>;	/* Medium */

		qcom,master-en = <1>;		/* Enable GPIO */

	};



	gpio@d100 { /* GPIO 18 */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Output low initially */

		qcom,vin-sel = <2>;		/* VIN 2 */

		qcom,src-sel = <2>;		/* Function 1 */

		qcom,out-strength = <2>;	/* Medium */

		qcom,master-en = <1>;		/* Enable GPIO */

	};



	gpio@d200 { /* GPIO 19 */
@@ -338,6 +358,10 @@ 
	};



	gpio@d400 { /* GPIO 21 */

		qcom,mode = <0>;

		qcom,pull = <0>;

		qcom,vin-sel = <2>;

		qcom,src-sel = <0>;

	};



	gpio@d500 { /* GPIO 22 */

arch/arm/boot/dts/apq8084-liquid.dtsi

+161 −24
Original line number Diff line number Diff line
@@ -16,17 +16,6 @@ 
	};

};



&pma8084_mpps {

	mpp@a200 { /* MPP 3 */

		/* ext_5v enable */

		qcom,mode = <1>;

		qcom,invert = <0>;

		qcom,vin-sel = <2>;

		qcom,src-sel = <0>;

		qcom,master-en = <1>;

	};

};



&soc {

	sound {

		qcom,model = "apq8084-taiko-liquid-snd-card";
@@ -136,19 +125,6 @@ 
	qcom,setb-gpios-dir =  <2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2>;

};



&pma8084_gpios {

	gpio@c600 { /* GPIO 7 */

		/* Backlight PWM */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Do not invert the output */

		qcom,vin-sel = <2>;		/* PMA8084 S4 = 1.8 V */

		qcom,src-sel = <2>;		/* Special Function 1 = LPG 3 */

		qcom,out-strength = <3>;	/* High drive strength */

		qcom,master-en = <1>;

	};

};



&sdhc_1 {

	vdd-supply = <&pma8084_l20>;

	qcom,vdd-voltage-level = <2950000 2950000>;
@@ -210,3 +186,164 @@ 
		qcom,cdc-micbias4-ext-cap;

	};

};



&pma8084_gpios {

	gpio@c000 { /* GPIO 1 */

	};



	gpio@c100 { /* GPIO 2 */

	};



	gpio@c200 { /* GPIO 3 */

	};



	gpio@c300 { /* GPIO 4 */

	};



	gpio@c400 { /* GPIO 5 */

	};



	gpio@c500 { /* GPIO 6 */

	};



	gpio@c600 { /* GPIO 7 */

		/* Backlight PWM */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Do not invert the output */

		qcom,vin-sel = <2>;		/* PMA8084 S4 = 1.8 V */

		qcom,src-sel = <2>;		/* Special Function 1=LPG 3 */

		qcom,out-strength = <3>;	/* High drive strength */

		qcom,master-en = <1>;

	};



	gpio@c700 { /* GPIO 8 */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Output low initially */

		qcom,vin-sel = <2>;		/* VPH_PWR */

		qcom,src-sel = <0>;		/* Constant */

		qcom,out-strength = <1>;	/* Low */

		qcom,master-en = <1>;		/* Enable GPIO */

	};



	gpio@c800 { /* GPIO 9 */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Output low initially */

		qcom,vin-sel = <2>;		/* VPH_PWR */

		qcom,src-sel = <0>;		/* Constant */

		qcom,out-strength = <1>;	/* Low */

		qcom,master-en = <1>;		/* Enable GPIO */

	};



	gpio@c900 { /* GPIO 10 */

	};



	gpio@ca00 { /* GPIO 11 */

		/* VBUS interrupt */

		qcom,mode = <0>;

		qcom,pull = <1>;

		qcom,vin-sel = <2>;

		qcom,src-sel = <0>;

	};



	gpio@cb00 { /* GPIO 12 */

	};



	gpio@cc00 { /* GPIO 13 */

	};



	gpio@cd00 { /* GPIO 14 */

	};



	gpio@ce00 { /* GPIO 15 */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Output low initially */

		qcom,vin-sel = <2>;		/* VIN 2 */

		qcom,src-sel = <2>;		/* Function 1 */

		qcom,out-strength = <2>;	/* Medium */

		qcom,master-en = <1>;		/* Enable GPIO */

	};



	gpio@cf00 { /* GPIO 16 */

	};



	gpio@d000 { /* GPIO 17 */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Output low initially */

		qcom,vin-sel = <2>;		/* VIN 2 */

		qcom,src-sel = <2>;		/* Function 1 */

		qcom,out-strength = <2>;	/* Medium */

		qcom,master-en = <1>;		/* Enable GPIO */

	};



	gpio@d100 { /* GPIO 18 */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Output low initially */

		qcom,vin-sel = <2>;		/* VIN 2 */

		qcom,src-sel = <2>;		/* Function 1 */

		qcom,out-strength = <2>;	/* Medium */

		qcom,master-en = <1>;		/* Enable GPIO */

	};



	gpio@d200 { /* GPIO 19 */

	};



	gpio@d300 { /* GPIO 20 */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Output low initially */

		qcom,vin-sel = <0>;		/* VPH_PWR */

		qcom,src-sel = <0>;		/* Constant */

		qcom,out-strength = <1>;	/* Low */

		qcom,master-en = <1>;		/* Enable GPIO */

	};



	gpio@d400 { /* GPIO 21 */

	};



	gpio@d500 { /* GPIO 22 */

	};

};



&pma8084_mpps {

	mpp@a000 { /* MPP 1 */

	};



	mpp@a100 { /* MPP 2 */

	};



	mpp@a200 { /* MPP 3 */

		/* HDMI_5v_vreg regulator enable */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,vin-sel = <2>;		/* VPH_PWR */

		qcom,src-sel = <0>;		/* Constant */

		qcom,master-en = <1>;		/* Enable GPIO */

	};



	mpp@a300 { /* MPP 4 */

	};



	mpp@a400 { /* MPP 5 */

	};



	mpp@a500 { /* MPP 6 */

	};



	mpp@a600 { /* MPP 7 */

		/* QCA1350_vreg regulator enable */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,vin-sel = <0>;		/* VPH_PWR */

		qcom,src-sel = <0>;		/* Constant */

		qcom,master-en = <1>;		/* Enable GPIO */

	};



	mpp@a700 { /* MPP 8 */

	};

};

arch/arm/boot/dts/apq8084-mtp.dtsi

+167 −34
Original line number Diff line number Diff line
@@ -152,40 +152,6 @@ 
	qcom,setb-gpios-dir =  <2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2>;

};



&pma8084_gpios {

	gpio@c100 { /* GPIO 2 */

		qcom,mode = <0>;

		qcom,pull = <0>;

		qcom,vin-sel = <2>;

		qcom,src-sel = <0>;

	};



	gpio@c400 { /* GPIO 5 */

		qcom,mode = <0>;

		qcom,pull = <0>;

		qcom,vin-sel = <2>;

		qcom,src-sel = <0>;

	};



	gpio@c600 { /* GPIO 7 */

		/* Backlight PWM */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Do not invert the output */

		qcom,vin-sel = <2>;		/* PMA8084 S4 = 1.8 V */

		qcom,src-sel = <2>;		/* Special Function 1 = LPG 3 */

		qcom,out-strength = <3>;	/* High drive strength */

		qcom,master-en = <1>;

	};



	gpio@d400 { /* GPIO 21 */

		qcom,mode = <0>;

		qcom,pull = <0>;

		qcom,vin-sel = <2>;

		qcom,src-sel = <0>;

	};

};



&sdhc_1 {

	vdd-supply = <&pma8084_l20>;

	qcom,vdd-voltage-level = <2950000 2950000>;
@@ -262,3 +228,170 @@ 
		synaptics,i2c-pull-up;

	};

};



&pma8084_gpios {

	gpio@c000 { /* GPIO 1 */

	};



	gpio@c100 { /* GPIO 2 */

		qcom,mode = <0>;

		qcom,pull = <0>;

		qcom,vin-sel = <2>;

		qcom,src-sel = <0>;

	};



	gpio@c200 { /* GPIO 3 */

	};



	gpio@c300 { /* GPIO 4 */

	};



	gpio@c400 { /* GPIO 5 */

		qcom,mode = <0>;

		qcom,pull = <0>;

		qcom,vin-sel = <2>;

		qcom,src-sel = <0>;

	};



	gpio@c500 { /* GPIO 6 */

	};



	gpio@c600 { /* GPIO 7 */

		/* Backlight PWM */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Do not invert the output */

		qcom,vin-sel = <2>;		/* PMA8084 S4 = 1.8 V */

		qcom,src-sel = <2>;		/* Special Function 1=LPG 3 */

		qcom,out-strength = <3>;	/* High drive strength */

		qcom,master-en = <1>;

	};



	gpio@c700 { /* GPIO 8 */

	};



	gpio@c800 { /* GPIO 9 */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Do not invert the output */

		qcom,vin-sel = <0>;		/* VPH_PWR */

		qcom,src-sel = <0>;		/* GPIO */

		qcom,out-strength = <1>;	/* High drive strength */

		qcom,master-en = <1>;		/* Enable GPIO */

	};



	gpio@c900 { /* GPIO 10 */

	};



	gpio@ca00 { /* GPIO 11 */

		/* VBUS interrupt */

		qcom,mode = <0>;

		qcom,pull = <1>;

		qcom,vin-sel = <2>;

		qcom,src-sel = <0>;

	};



	gpio@cb00 { /* GPIO 12 */

	};



	gpio@cc00 { /* GPIO 13 */

	};



	gpio@cd00 { /* GPIO 14 */

	};



	gpio@ce00 { /* GPIO 15 */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Output low initially */

		qcom,vin-sel = <2>;		/* VIN 2 */

		qcom,src-sel = <2>;		/* Function 1 */

		qcom,out-strength = <2>;	/* Medium */

		qcom,master-en = <1>;		/* Enable GPIO */

	};



	gpio@cf00 { /* GPIO 16 */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Output low initially */

		qcom,vin-sel = <2>;		/* VIN 2 */

		qcom,src-sel = <2>;		/* Function 1 */

		qcom,out-strength = <2>;	/* Medium */

		qcom,master-en = <1>;		/* Enable GPIO */

	};



	gpio@d000 { /* GPIO 17 */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Output low initially */

		qcom,vin-sel = <2>;		/* VIN 2 */

		qcom,src-sel = <2>;		/* Function 1 */

		qcom,out-strength = <2>;	/* Medium */

		qcom,master-en = <1>;		/* Enable GPIO */

	};



	gpio@d100 { /* GPIO 18 */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Output low initially */

		qcom,vin-sel = <2>;		/* VIN 2 */

		qcom,src-sel = <2>;		/* Function 1 */

		qcom,out-strength = <2>;	/* Medium */

		qcom,master-en = <1>;		/* Enable GPIO */

	};



	gpio@d200 { /* GPIO 19 */

	};



	gpio@d300 { /* GPIO 20 */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Do not invert the output */

		qcom,vin-sel = <0>;		/* VPH_PWR */

		qcom,src-sel = <0>;		/* GPIO */

		qcom,out-strength = <1>;	/* High drive strength */

		qcom,master-en = <1>;		/* Enable GPIO */

	};



	gpio@d400 { /* GPIO 21 */

		qcom,mode = <0>;

		qcom,pull = <0>;

		qcom,vin-sel = <2>;

		qcom,src-sel = <0>;

	};



	gpio@d500 { /* GPIO 22 */

	};

};



&pma8084_mpps {

	mpp@a000 { /* MPP 1 */

	};



	mpp@a100 { /* MPP 2 */

	};



	mpp@a200 { /* MPP 3 */

		/* HDMI_5v_vreg regulator enable */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,vin-sel = <2>;		/* VPH_PWR */

		qcom,src-sel = <0>;		/* Constant */

		qcom,master-en = <1>;		/* Enable GPIO */

	};



	mpp@a300 { /* MPP 4 */

	};



	mpp@a400 { /* MPP 5 */

	};



	mpp@a500 { /* MPP 6 */

	};



	mpp@a600 { /* MPP 7 */

	};



	mpp@a700 { /* MPP 8 */

	};

};