Loading arch/arm/mach-msm/board-8084-gpiomux.c +53 −1 Original line number Diff line number Diff line Loading @@ -16,6 +16,7 @@ #include <linux/ioport.h> #include <mach/board.h> #include <mach/gpiomux.h> #include <mach/socinfo.h> static struct gpiomux_setting ap2mdm_cfg = { .func = GPIOMUX_FUNC_GPIO, Loading Loading @@ -181,6 +182,18 @@ static struct gpiomux_setting gpio_spi_config = { .pull = GPIOMUX_PULL_NONE, }; static struct gpiomux_setting gpio_uart_gps_liquid_config = { .func = GPIOMUX_FUNC_1, .drv = GPIOMUX_DRV_16MA, .pull = GPIOMUX_PULL_NONE, }; static struct gpiomux_setting gpio_uart_gps_cdp_config = { .func = GPIOMUX_FUNC_3, .drv = GPIOMUX_DRV_16MA, .pull = GPIOMUX_PULL_NONE, }; static struct msm_gpiomux_config msm_blsp_configs[] __initdata = { { .gpio = 0, /* BLSP1 QUP1 SPI_DATA_MOSI */ Loading Loading @@ -277,6 +290,37 @@ static struct msm_gpiomux_config msm_blsp1_uart6_configs[] __initdata = { }, }; /* QCA1530 uses differnt GPIOs based on platform, hence these settings */ static struct msm_gpiomux_config msm_blsp2_uart5_configs[] __initdata = { { .gpio = 112, /* BLSP2 UART5 TX */ .settings = { [GPIOMUX_SUSPENDED] = &gpio_uart_gps_liquid_config, }, }, { .gpio = 113, /* BLSP2 UART5 RX */ .settings = { [GPIOMUX_SUSPENDED] = &gpio_uart_gps_liquid_config, }, }, }; static struct msm_gpiomux_config msm_blsp2_uart1_configs[] __initdata = { { .gpio = 130, /* BLSP2 UART1 TX */ .settings = { [GPIOMUX_SUSPENDED] = &gpio_uart_gps_cdp_config, }, }, { .gpio = 131, /* BLSP2 UART1 RX */ .settings = { [GPIOMUX_SUSPENDED] = &gpio_uart_gps_cdp_config, }, }, }; static struct gpiomux_setting hdmi_suspend_cfg = { .func = GPIOMUX_FUNC_GPIO, .drv = GPIOMUX_DRV_2MA, Loading Loading @@ -554,10 +598,18 @@ void __init apq8084_init_gpiomux(void) ARRAY_SIZE(msm_blsp1_uart6_configs)); msm_gpiomux_install(msm_synaptics_configs, ARRAY_SIZE(msm_synaptics_configs)); if (of_board_is_liquid()) msm_gpiomux_install(msm_blsp2_uart5_configs, ARRAY_SIZE(msm_blsp2_uart5_configs)); else { msm_gpiomux_install(mdm_configs, ARRAY_SIZE(mdm_configs)); msm_gpiomux_install(msm_blsp2_uart1_configs, ARRAY_SIZE(msm_blsp2_uart1_configs)); } msm_gpiomux_install(apq8084_hsic_configs, ARRAY_SIZE(apq8084_hsic_configs)); msm_gpiomux_install(msm_lcd_configs, ARRAY_SIZE(msm_lcd_configs)); msm_gpiomux_install(mdm_configs, ARRAY_SIZE(mdm_configs)); msm_gpiomux_install(apq8084_pri_ter_auxpcm_configs, ARRAY_SIZE(apq8084_pri_ter_auxpcm_configs)); msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs)); Loading Loading
arch/arm/mach-msm/board-8084-gpiomux.c +53 −1 Original line number Diff line number Diff line Loading @@ -16,6 +16,7 @@ #include <linux/ioport.h> #include <mach/board.h> #include <mach/gpiomux.h> #include <mach/socinfo.h> static struct gpiomux_setting ap2mdm_cfg = { .func = GPIOMUX_FUNC_GPIO, Loading Loading @@ -181,6 +182,18 @@ static struct gpiomux_setting gpio_spi_config = { .pull = GPIOMUX_PULL_NONE, }; static struct gpiomux_setting gpio_uart_gps_liquid_config = { .func = GPIOMUX_FUNC_1, .drv = GPIOMUX_DRV_16MA, .pull = GPIOMUX_PULL_NONE, }; static struct gpiomux_setting gpio_uart_gps_cdp_config = { .func = GPIOMUX_FUNC_3, .drv = GPIOMUX_DRV_16MA, .pull = GPIOMUX_PULL_NONE, }; static struct msm_gpiomux_config msm_blsp_configs[] __initdata = { { .gpio = 0, /* BLSP1 QUP1 SPI_DATA_MOSI */ Loading Loading @@ -277,6 +290,37 @@ static struct msm_gpiomux_config msm_blsp1_uart6_configs[] __initdata = { }, }; /* QCA1530 uses differnt GPIOs based on platform, hence these settings */ static struct msm_gpiomux_config msm_blsp2_uart5_configs[] __initdata = { { .gpio = 112, /* BLSP2 UART5 TX */ .settings = { [GPIOMUX_SUSPENDED] = &gpio_uart_gps_liquid_config, }, }, { .gpio = 113, /* BLSP2 UART5 RX */ .settings = { [GPIOMUX_SUSPENDED] = &gpio_uart_gps_liquid_config, }, }, }; static struct msm_gpiomux_config msm_blsp2_uart1_configs[] __initdata = { { .gpio = 130, /* BLSP2 UART1 TX */ .settings = { [GPIOMUX_SUSPENDED] = &gpio_uart_gps_cdp_config, }, }, { .gpio = 131, /* BLSP2 UART1 RX */ .settings = { [GPIOMUX_SUSPENDED] = &gpio_uart_gps_cdp_config, }, }, }; static struct gpiomux_setting hdmi_suspend_cfg = { .func = GPIOMUX_FUNC_GPIO, .drv = GPIOMUX_DRV_2MA, Loading Loading @@ -554,10 +598,18 @@ void __init apq8084_init_gpiomux(void) ARRAY_SIZE(msm_blsp1_uart6_configs)); msm_gpiomux_install(msm_synaptics_configs, ARRAY_SIZE(msm_synaptics_configs)); if (of_board_is_liquid()) msm_gpiomux_install(msm_blsp2_uart5_configs, ARRAY_SIZE(msm_blsp2_uart5_configs)); else { msm_gpiomux_install(mdm_configs, ARRAY_SIZE(mdm_configs)); msm_gpiomux_install(msm_blsp2_uart1_configs, ARRAY_SIZE(msm_blsp2_uart1_configs)); } msm_gpiomux_install(apq8084_hsic_configs, ARRAY_SIZE(apq8084_hsic_configs)); msm_gpiomux_install(msm_lcd_configs, ARRAY_SIZE(msm_lcd_configs)); msm_gpiomux_install(mdm_configs, ARRAY_SIZE(mdm_configs)); msm_gpiomux_install(apq8084_pri_ter_auxpcm_configs, ARRAY_SIZE(apq8084_pri_ter_auxpcm_configs)); msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs)); Loading