Loading arch/arm/boot/dts/qti/Makefile +2 −1 Original line number Diff line number Diff line Loading @@ -90,7 +90,8 @@ dtb-$(CONFIG_ARCH_APQ8084) += apq8084-sim.dtb \ apq8084-smb1357-cdp.dtb \ apq8084-smb1357-mtp.dtb \ apq8084-smb349-cdp.dtb \ apq8084-smb349-mtp.dtb apq8084-smb349-mtp.dtb \ apq8084-sbc.dtb DTB_NAMES := $(subst $\",,$(CONFIG_BUILD_ARM_APPENDED_DTB_IMAGE_NAMES)) ifneq ($(DTB_NAMES),) Loading arch/arm/boot/dts/qti/apq8084-sbc.dts 0 → 100644 +22 −0 Original line number Diff line number Diff line /* Copyright (c) 2013, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "apq8084.dtsi" #include "apq8084-sbc.dtsi" / { model = "QTI APQ 8084 SBC"; compatible = "qcom,apq8084-sbc", "qcom,apq8084", "qcom,sbc"; qcom,board-id = <24 0>; }; arch/arm/boot/dts/qti/apq8084-sbc.dtsi 0 → 100644 +467 −0 Original line number Diff line number Diff line /* Copyright (c) 2013, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ / { aliases { serial0 = &blsp2_uart1; }; bt_qca6174 { compatible = "qca,qca6174"; qca,bt-reset-gpio = <&pma8084_gpios 4 0>; /* BT_EN */ }; }; &soc { i2c@f9926000 { /* BLSP-1 QUP-4 */ status = "disabled"; }; serial@f991f000 { status = "disabled"; }; sound { qcom,model = "apq8084-taiko-sbc-snd-card"; qcom,audio-routing = "RX_BIAS", "MCLK", "LDO_H", "MCLK", "AIF4 MAD", "MCLK", "AMIC2", "MIC BIAS2 External", "MIC BIAS2 External", "Headset Mic", "AMIC5", "MIC BIAS1 External", "MIC BIAS1 External", "Analog Mic5", "AMIC6", "MIC BIAS3 External", "MIC BIAS3 External", "Analog Mic6", "DMIC1", "MIC BIAS4 External", "MIC BIAS4 External", "Digital Mic4", "DMIC2", "MIC BIAS4 External", "MIC BIAS4 External", "Digital Mic3", "DMIC3", "MIC BIAS4 External", "MIC BIAS4 External", "Digital Mic2", "DMIC4", "MIC BIAS4 External", "MIC BIAS4 External", "Digital Mic1", "DMIC5", "MIC BIAS4 External", "MIC BIAS4 External", "Digital Mic5", "DMIC6", "MIC BIAS4 External", "MIC BIAS4 External", "Digital Mic6"; qcom,hdmi-audio-rx; qcom,cdc-micbias2-headset-only; }; gnss_qca1530: qca,qca1530@0 { compatible = "qca,qca1530"; qca,reset-gpio = <&msmgpio 128 0>; qca,clk-gpio = <&pma8084_gpios 17 0>; qca,pwr-supply = <&pma8084_l26>; qca,xlna-supply = <&pma8084_l22>; }; }; &mdss_mdp { qcom,mdss-pref-prim-intf = "hdmi"; }; &mdss_hdmi_tx { qcom,mdss-fb-map = <&mdss_fb0>; }; &uart6 { status = "ok"; qcom,tx-gpio = <&msmgpio 43 0x00>; qcom,rx-gpio = <&msmgpio 44 0x00>; qcom,cts-gpio = <&msmgpio 45 0x00>; qcom,rfr-gpio = <&msmgpio 46 0x00>; qcom,inject-rx-on-wakeup = <1>; qcom,rx-char-to-inject = <0xFD>; }; &blsp1_uart1 { status = "disabled"; }; &blsp2_uart0 { status = "disabled"; }; &blsp2_uart1 { status = "ok"; qcom,config-gpio = <2>; qcom,tx-gpio = <&msmgpio 51 0x00>; qcom,rx-gpio = <&msmgpio 52 0x00>; }; &blsp2_uart4 { status = "ok"; qcom,config-gpio = <2>; qcom,tx-gpio = <&msmgpio 112 0>; qcom,rx-gpio = <&msmgpio 113 0>; }; &spi_0 { status = "disabled"; }; &i2c_0 { status = "ok"; }; &i2c_1 { status = "ok"; }; &i2c_2 { status = "disabled"; }; &ufsphy1 { status = "disabled"; }; &ufs1 { status = "disabled"; }; /* CoreSight */ &tpiu { qcom,seta-gpios = <&msmgpio 4 0>, <&msmgpio 5 0>, <&msmgpio 6 0>, <&msmgpio 7 0>, <&msmgpio 48 0>, <&msmgpio 49 0>, <&msmgpio 50 0>, <&msmgpio 51 0>, <&msmgpio 52 0>, <&msmgpio 53 0>, <&msmgpio 54 0>, <&msmgpio 55 0>, <&msmgpio 56 0>, <&msmgpio 57 0>, <&msmgpio 63 0>, <&msmgpio 64 0>, <&msmgpio 75 0>, <&msmgpio 122 0>; qcom,seta-gpios-func = <4 4 4 4 5 4 4 5 5 4 4 4 4 4 4 5 2 1>; qcom,seta-gpios-drv = <7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7>; qcom,seta-gpios-pull = <0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0>; qcom,seta-gpios-dir = <2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2>; qcom,setb-gpios = <&msmgpio 10 0>, <&msmgpio 11 0>, <&msmgpio 29 0>, <&msmgpio 30 0>, <&msmgpio 39 0>, <&msmgpio 40 0>, <&msmgpio 43 0>, <&msmgpio 44 0>, <&msmgpio 45 0>, <&msmgpio 46 0>, <&msmgpio 67 0>, <&msmgpio 68 0>, <&msmgpio 69 0>, <&msmgpio 70 0>, <&msmgpio 71 0>, <&msmgpio 72 0>, <&msmgpio 102 0>, <&msmgpio 121 0>; qcom,setb-gpios-func = <4 4 5 4 4 4 4 4 4 4 3 3 2 4 3 3 2 1>; qcom,setb-gpios-drv = <7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7>; qcom,setb-gpios-pull = <0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0>; qcom,setb-gpios-dir = <2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2>; }; &sdhc_1 { status = "ok"; vdd-supply = <&pma8084_l20>; qcom,vdd-voltage-level = <2950000 2950000>; qcom,vdd-current-level = <200 500000>; vdd-io-supply = <&pma8084_s4>; qcom,vdd-io-always-on; qcom,vdd-io-voltage-level = <1800000 1800000>; qcom,vdd-io-current-level = <200 154000>; qcom,pad-pull-on = <0x0 0x3 0x3 0x1>; /* no-pull, pull-up, pull-up, pull-down */ qcom,pad-pull-off = <0x0 0x3 0x3 0x1>; /* no-pull, pull-up, pull-up, pull-down */ qcom,pad-drv-on = <0x7 0x4 0x4>; /* 16mA, 10mA, 10mA */ qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */ qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 192000000 384000000>; qcom,nonremovable; qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v"; }; &sdhc_2 { status = "ok"; vdd-supply = <&pma8084_l21>; qcom,vdd-voltage-level = <2950000 2950000>; qcom,vdd-current-level = <200 800000>; vdd-io-supply = <&pma8084_l13>; qcom,vdd-io-voltage-level = <1800000 2950000>; qcom,vdd-io-current-level = <200 22000>; qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ qcom,pad-drv-on = <0x7 0x4 0x4>; /* 16mA, 10mA, 10mA */ qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */ qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 200000000>; qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104"; #address-cells = <0>; interrupt-parent = <&sdhc_2>; interrupts = <0 1 2>; #interrupt-cells = <1>; interrupt-map-mask = <0xffffffff>; interrupt-map = <0 &intc 0 125 0 1 &intc 0 221 0 2 &msmgpio 122 0x3>; interrupt-names = "hc_irq", "pwr_irq", "status_irq"; cd-gpios = <&msmgpio 122 0x1>; }; &vph_pwr_vreg { status = "ok"; }; &slim_msm { taiko_codec { qcom,cdc-micbias1-ext-cap; qcom,cdc-micbias2-ext-cap; qcom,cdc-micbias3-ext-cap; /* * SBC has external spkrdrv supply that will be always ON. * Give a dummy supply to make codec driver happy. */ cdc-vdd-spkdrv-supply = <&vph_pwr_vreg>; qcom,cdc-vdd-spkdrv-voltage = <0 0>; qcom,cdc-vdd-spkdrv-current = <0>; qcom,cdc-on-demand-supplies = "cdc-vdd-spkdrv"; }; }; &usb3 { qcom,charging-disabled; }; &usb3_sec { status = "ok"; }; &hsphy1 { status = "ok"; }; &ssphy1 { status = "ok"; }; &pma8084_gpios { gpio@c000 { /* GPIO 1 */ }; gpio@c100 { /* GPIO 2 */ /* KYPD_VOLP_N */ qcom,mode = <0>; qcom,pull = <0>; qcom,vin-sel = <2>; qcom,src-sel = <0>; }; gpio@c200 { /* GPIO 3 */ }; gpio@c300 { /* GPIO 4 */ /* BT_CHARGE_EN */ qcom,mode = <1>; /* Digital output*/ qcom,pull = <4>; /* Pulldown 10uA */ qcom,vin-sel = <2>; /* VIN2 */ qcom,src-sel = <0>; /* GPIO */ qcom,invert = <0>; /* Invert */ qcom,master-en = <1>; /* Enable GPIO */ }; gpio@c400 { /* GPIO 5 */ /* Expansion PWM2 */ qcom,mode = <0>; qcom,pull = <0>; qcom,vin-sel = <2>; qcom,src-sel = <0>; }; gpio@c500 { /* GPIO 6 */ }; gpio@c600 { /* GPIO 7 */ /* BACKLIGHT_PWM */ }; gpio@c700 { /* GPIO 8 */ /* Expansion PWM */ qcom,mode = <0>; qcom,pull = <0>; qcom,vin-sel = <2>; qcom,src-sel = <0>; }; gpio@c800 { /* GPIO 9 */ /* BACKLIGHT2_PWM */ qcom,mode = <1>; /* Digital output */ qcom,output-type = <0>; /* CMOS logic */ qcom,invert = <0>; /* Do not invert the output */ qcom,vin-sel = <0>; /* VPH_PWR */ qcom,src-sel = <0>; /* GPIO */ qcom,out-strength = <1>; /* High drive strength */ qcom,master-en = <1>; /* Enable GPIO */ }; gpio@c900 { /* GPIO 10 */ /* LED1 */ qcom,mode = <1>; /* Digital output */ qcom,output-type = <0>; /* CMOS logic */ qcom,pull = <4>; /* Pull down */ qcom,invert = <0>; /* Do not invert the output */ qcom,vin-sel = <2>; /* VIN 2*/ qcom,src-sel = <0>; /* GPIO */ qcom,out-strength = <2>; /* Medium drive strength */ qcom,master-en = <1>; /* Enable GPIO */ }; gpio@ca00 { /* GPIO 11 */ /* USB_VBUS_CNTL0 VBUS interrupt */ qcom,mode = <0>; qcom,pull = <1>; qcom,vin-sel = <2>; qcom,src-sel = <0>; }; gpio@cb00 { /* GPIO 12 */ }; gpio@cc00 { /* GPIO 13 */ }; gpio@cd00 { /* GPIO 14 */ }; gpio@ce00 { /* GPIO 15 */ /* DIV_CLK1 Codec */ qcom,mode = <1>; /* Digital output */ qcom,output-type = <0>; /* CMOS logic */ qcom,invert = <0>; /* Output low initially */ qcom,vin-sel = <2>; /* VIN 2 */ qcom,src-sel = <2>; /* Function 1 */ qcom,out-strength = <2>; /* Medium */ qcom,master-en = <1>; /* Enable GPIO */ }; gpio@cf00 { /* GPIO 16 */ }; gpio@d000 { /* GPIO 17 */ /* DIV_CLK3 SLEEP_CLK */ qcom,mode = <1>; /* Digital output */ qcom,output-type = <0>; /* CMOS logic */ qcom,invert = <0>; /* Output low initially */ qcom,vin-sel = <2>; /* VIN 2 */ qcom,src-sel = <3>; /* Function 2 */ qcom,out-strength = <2>; /* Medium */ qcom,master-en = <1>; /* Enable GPIO */ }; gpio@d100 { /* GPIO 18 */ /* DIV_CLK4 SLEEP_CLK */ qcom,mode = <1>; /* Digital output */ qcom,output-type = <0>; /* CMOS logic */ qcom,invert = <0>; /* Output low initially */ qcom,vin-sel = <2>; /* VIN 2 */ qcom,src-sel = <3>; /* Function 2 */ qcom,out-strength = <2>; /* Medium */ qcom,master-en = <1>; /* Enable GPIO */ }; gpio@d200 { /* GPIO 19 */ }; gpio@d300 { /* GPIO 20 */ /* LED2 */ qcom,mode = <1>; /* Digital output */ qcom,output-type = <0>; /* CMOS logic */ qcom,pull = <4>; /* Pull down */ qcom,invert = <0>; /* Do not invert the output */ qcom,vin-sel = <2>; /* VIN 2 */ qcom,src-sel = <0>; /* GPIO */ qcom,out-strength = <2>; /* Medium drive strength ?*/ qcom,master-en = <1>; /* Enable GPIO */ }; gpio@d400 { /* GPIO 21 */ }; gpio@d500 { /* GPIO 22 */ }; }; &pma8084_mpps { mpp@a000 { /* MPP 1 */ }; mpp@a100 { /* MPP 2 */ }; mpp@a200 { /* MPP 3 */ }; mpp@a300 { /* MPP 4 */ }; mpp@a400 { /* MPP 5 */ }; mpp@a500 { /* MPP 6 */ }; mpp@a600 { /* MPP 7 */ }; mpp@a700 { /* MPP 8 */ }; }; &pma8084_l16 { status = "disabled"; }; &pma8084_l17 { status = "ok"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; qcom,init-voltage = <2850000>; }; &pma8084_l22 { status = "ok"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; qcom,init-voltage = <2850000>; }; &pcie0 { vreg-3.3-supply = <&vph_pwr_vreg>; }; Loading
arch/arm/boot/dts/qti/Makefile +2 −1 Original line number Diff line number Diff line Loading @@ -90,7 +90,8 @@ dtb-$(CONFIG_ARCH_APQ8084) += apq8084-sim.dtb \ apq8084-smb1357-cdp.dtb \ apq8084-smb1357-mtp.dtb \ apq8084-smb349-cdp.dtb \ apq8084-smb349-mtp.dtb apq8084-smb349-mtp.dtb \ apq8084-sbc.dtb DTB_NAMES := $(subst $\",,$(CONFIG_BUILD_ARM_APPENDED_DTB_IMAGE_NAMES)) ifneq ($(DTB_NAMES),) Loading
arch/arm/boot/dts/qti/apq8084-sbc.dts 0 → 100644 +22 −0 Original line number Diff line number Diff line /* Copyright (c) 2013, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "apq8084.dtsi" #include "apq8084-sbc.dtsi" / { model = "QTI APQ 8084 SBC"; compatible = "qcom,apq8084-sbc", "qcom,apq8084", "qcom,sbc"; qcom,board-id = <24 0>; };
arch/arm/boot/dts/qti/apq8084-sbc.dtsi 0 → 100644 +467 −0 Original line number Diff line number Diff line /* Copyright (c) 2013, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ / { aliases { serial0 = &blsp2_uart1; }; bt_qca6174 { compatible = "qca,qca6174"; qca,bt-reset-gpio = <&pma8084_gpios 4 0>; /* BT_EN */ }; }; &soc { i2c@f9926000 { /* BLSP-1 QUP-4 */ status = "disabled"; }; serial@f991f000 { status = "disabled"; }; sound { qcom,model = "apq8084-taiko-sbc-snd-card"; qcom,audio-routing = "RX_BIAS", "MCLK", "LDO_H", "MCLK", "AIF4 MAD", "MCLK", "AMIC2", "MIC BIAS2 External", "MIC BIAS2 External", "Headset Mic", "AMIC5", "MIC BIAS1 External", "MIC BIAS1 External", "Analog Mic5", "AMIC6", "MIC BIAS3 External", "MIC BIAS3 External", "Analog Mic6", "DMIC1", "MIC BIAS4 External", "MIC BIAS4 External", "Digital Mic4", "DMIC2", "MIC BIAS4 External", "MIC BIAS4 External", "Digital Mic3", "DMIC3", "MIC BIAS4 External", "MIC BIAS4 External", "Digital Mic2", "DMIC4", "MIC BIAS4 External", "MIC BIAS4 External", "Digital Mic1", "DMIC5", "MIC BIAS4 External", "MIC BIAS4 External", "Digital Mic5", "DMIC6", "MIC BIAS4 External", "MIC BIAS4 External", "Digital Mic6"; qcom,hdmi-audio-rx; qcom,cdc-micbias2-headset-only; }; gnss_qca1530: qca,qca1530@0 { compatible = "qca,qca1530"; qca,reset-gpio = <&msmgpio 128 0>; qca,clk-gpio = <&pma8084_gpios 17 0>; qca,pwr-supply = <&pma8084_l26>; qca,xlna-supply = <&pma8084_l22>; }; }; &mdss_mdp { qcom,mdss-pref-prim-intf = "hdmi"; }; &mdss_hdmi_tx { qcom,mdss-fb-map = <&mdss_fb0>; }; &uart6 { status = "ok"; qcom,tx-gpio = <&msmgpio 43 0x00>; qcom,rx-gpio = <&msmgpio 44 0x00>; qcom,cts-gpio = <&msmgpio 45 0x00>; qcom,rfr-gpio = <&msmgpio 46 0x00>; qcom,inject-rx-on-wakeup = <1>; qcom,rx-char-to-inject = <0xFD>; }; &blsp1_uart1 { status = "disabled"; }; &blsp2_uart0 { status = "disabled"; }; &blsp2_uart1 { status = "ok"; qcom,config-gpio = <2>; qcom,tx-gpio = <&msmgpio 51 0x00>; qcom,rx-gpio = <&msmgpio 52 0x00>; }; &blsp2_uart4 { status = "ok"; qcom,config-gpio = <2>; qcom,tx-gpio = <&msmgpio 112 0>; qcom,rx-gpio = <&msmgpio 113 0>; }; &spi_0 { status = "disabled"; }; &i2c_0 { status = "ok"; }; &i2c_1 { status = "ok"; }; &i2c_2 { status = "disabled"; }; &ufsphy1 { status = "disabled"; }; &ufs1 { status = "disabled"; }; /* CoreSight */ &tpiu { qcom,seta-gpios = <&msmgpio 4 0>, <&msmgpio 5 0>, <&msmgpio 6 0>, <&msmgpio 7 0>, <&msmgpio 48 0>, <&msmgpio 49 0>, <&msmgpio 50 0>, <&msmgpio 51 0>, <&msmgpio 52 0>, <&msmgpio 53 0>, <&msmgpio 54 0>, <&msmgpio 55 0>, <&msmgpio 56 0>, <&msmgpio 57 0>, <&msmgpio 63 0>, <&msmgpio 64 0>, <&msmgpio 75 0>, <&msmgpio 122 0>; qcom,seta-gpios-func = <4 4 4 4 5 4 4 5 5 4 4 4 4 4 4 5 2 1>; qcom,seta-gpios-drv = <7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7>; qcom,seta-gpios-pull = <0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0>; qcom,seta-gpios-dir = <2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2>; qcom,setb-gpios = <&msmgpio 10 0>, <&msmgpio 11 0>, <&msmgpio 29 0>, <&msmgpio 30 0>, <&msmgpio 39 0>, <&msmgpio 40 0>, <&msmgpio 43 0>, <&msmgpio 44 0>, <&msmgpio 45 0>, <&msmgpio 46 0>, <&msmgpio 67 0>, <&msmgpio 68 0>, <&msmgpio 69 0>, <&msmgpio 70 0>, <&msmgpio 71 0>, <&msmgpio 72 0>, <&msmgpio 102 0>, <&msmgpio 121 0>; qcom,setb-gpios-func = <4 4 5 4 4 4 4 4 4 4 3 3 2 4 3 3 2 1>; qcom,setb-gpios-drv = <7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7>; qcom,setb-gpios-pull = <0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0>; qcom,setb-gpios-dir = <2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2>; }; &sdhc_1 { status = "ok"; vdd-supply = <&pma8084_l20>; qcom,vdd-voltage-level = <2950000 2950000>; qcom,vdd-current-level = <200 500000>; vdd-io-supply = <&pma8084_s4>; qcom,vdd-io-always-on; qcom,vdd-io-voltage-level = <1800000 1800000>; qcom,vdd-io-current-level = <200 154000>; qcom,pad-pull-on = <0x0 0x3 0x3 0x1>; /* no-pull, pull-up, pull-up, pull-down */ qcom,pad-pull-off = <0x0 0x3 0x3 0x1>; /* no-pull, pull-up, pull-up, pull-down */ qcom,pad-drv-on = <0x7 0x4 0x4>; /* 16mA, 10mA, 10mA */ qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */ qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 192000000 384000000>; qcom,nonremovable; qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v"; }; &sdhc_2 { status = "ok"; vdd-supply = <&pma8084_l21>; qcom,vdd-voltage-level = <2950000 2950000>; qcom,vdd-current-level = <200 800000>; vdd-io-supply = <&pma8084_l13>; qcom,vdd-io-voltage-level = <1800000 2950000>; qcom,vdd-io-current-level = <200 22000>; qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ qcom,pad-drv-on = <0x7 0x4 0x4>; /* 16mA, 10mA, 10mA */ qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */ qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 200000000>; qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104"; #address-cells = <0>; interrupt-parent = <&sdhc_2>; interrupts = <0 1 2>; #interrupt-cells = <1>; interrupt-map-mask = <0xffffffff>; interrupt-map = <0 &intc 0 125 0 1 &intc 0 221 0 2 &msmgpio 122 0x3>; interrupt-names = "hc_irq", "pwr_irq", "status_irq"; cd-gpios = <&msmgpio 122 0x1>; }; &vph_pwr_vreg { status = "ok"; }; &slim_msm { taiko_codec { qcom,cdc-micbias1-ext-cap; qcom,cdc-micbias2-ext-cap; qcom,cdc-micbias3-ext-cap; /* * SBC has external spkrdrv supply that will be always ON. * Give a dummy supply to make codec driver happy. */ cdc-vdd-spkdrv-supply = <&vph_pwr_vreg>; qcom,cdc-vdd-spkdrv-voltage = <0 0>; qcom,cdc-vdd-spkdrv-current = <0>; qcom,cdc-on-demand-supplies = "cdc-vdd-spkdrv"; }; }; &usb3 { qcom,charging-disabled; }; &usb3_sec { status = "ok"; }; &hsphy1 { status = "ok"; }; &ssphy1 { status = "ok"; }; &pma8084_gpios { gpio@c000 { /* GPIO 1 */ }; gpio@c100 { /* GPIO 2 */ /* KYPD_VOLP_N */ qcom,mode = <0>; qcom,pull = <0>; qcom,vin-sel = <2>; qcom,src-sel = <0>; }; gpio@c200 { /* GPIO 3 */ }; gpio@c300 { /* GPIO 4 */ /* BT_CHARGE_EN */ qcom,mode = <1>; /* Digital output*/ qcom,pull = <4>; /* Pulldown 10uA */ qcom,vin-sel = <2>; /* VIN2 */ qcom,src-sel = <0>; /* GPIO */ qcom,invert = <0>; /* Invert */ qcom,master-en = <1>; /* Enable GPIO */ }; gpio@c400 { /* GPIO 5 */ /* Expansion PWM2 */ qcom,mode = <0>; qcom,pull = <0>; qcom,vin-sel = <2>; qcom,src-sel = <0>; }; gpio@c500 { /* GPIO 6 */ }; gpio@c600 { /* GPIO 7 */ /* BACKLIGHT_PWM */ }; gpio@c700 { /* GPIO 8 */ /* Expansion PWM */ qcom,mode = <0>; qcom,pull = <0>; qcom,vin-sel = <2>; qcom,src-sel = <0>; }; gpio@c800 { /* GPIO 9 */ /* BACKLIGHT2_PWM */ qcom,mode = <1>; /* Digital output */ qcom,output-type = <0>; /* CMOS logic */ qcom,invert = <0>; /* Do not invert the output */ qcom,vin-sel = <0>; /* VPH_PWR */ qcom,src-sel = <0>; /* GPIO */ qcom,out-strength = <1>; /* High drive strength */ qcom,master-en = <1>; /* Enable GPIO */ }; gpio@c900 { /* GPIO 10 */ /* LED1 */ qcom,mode = <1>; /* Digital output */ qcom,output-type = <0>; /* CMOS logic */ qcom,pull = <4>; /* Pull down */ qcom,invert = <0>; /* Do not invert the output */ qcom,vin-sel = <2>; /* VIN 2*/ qcom,src-sel = <0>; /* GPIO */ qcom,out-strength = <2>; /* Medium drive strength */ qcom,master-en = <1>; /* Enable GPIO */ }; gpio@ca00 { /* GPIO 11 */ /* USB_VBUS_CNTL0 VBUS interrupt */ qcom,mode = <0>; qcom,pull = <1>; qcom,vin-sel = <2>; qcom,src-sel = <0>; }; gpio@cb00 { /* GPIO 12 */ }; gpio@cc00 { /* GPIO 13 */ }; gpio@cd00 { /* GPIO 14 */ }; gpio@ce00 { /* GPIO 15 */ /* DIV_CLK1 Codec */ qcom,mode = <1>; /* Digital output */ qcom,output-type = <0>; /* CMOS logic */ qcom,invert = <0>; /* Output low initially */ qcom,vin-sel = <2>; /* VIN 2 */ qcom,src-sel = <2>; /* Function 1 */ qcom,out-strength = <2>; /* Medium */ qcom,master-en = <1>; /* Enable GPIO */ }; gpio@cf00 { /* GPIO 16 */ }; gpio@d000 { /* GPIO 17 */ /* DIV_CLK3 SLEEP_CLK */ qcom,mode = <1>; /* Digital output */ qcom,output-type = <0>; /* CMOS logic */ qcom,invert = <0>; /* Output low initially */ qcom,vin-sel = <2>; /* VIN 2 */ qcom,src-sel = <3>; /* Function 2 */ qcom,out-strength = <2>; /* Medium */ qcom,master-en = <1>; /* Enable GPIO */ }; gpio@d100 { /* GPIO 18 */ /* DIV_CLK4 SLEEP_CLK */ qcom,mode = <1>; /* Digital output */ qcom,output-type = <0>; /* CMOS logic */ qcom,invert = <0>; /* Output low initially */ qcom,vin-sel = <2>; /* VIN 2 */ qcom,src-sel = <3>; /* Function 2 */ qcom,out-strength = <2>; /* Medium */ qcom,master-en = <1>; /* Enable GPIO */ }; gpio@d200 { /* GPIO 19 */ }; gpio@d300 { /* GPIO 20 */ /* LED2 */ qcom,mode = <1>; /* Digital output */ qcom,output-type = <0>; /* CMOS logic */ qcom,pull = <4>; /* Pull down */ qcom,invert = <0>; /* Do not invert the output */ qcom,vin-sel = <2>; /* VIN 2 */ qcom,src-sel = <0>; /* GPIO */ qcom,out-strength = <2>; /* Medium drive strength ?*/ qcom,master-en = <1>; /* Enable GPIO */ }; gpio@d400 { /* GPIO 21 */ }; gpio@d500 { /* GPIO 22 */ }; }; &pma8084_mpps { mpp@a000 { /* MPP 1 */ }; mpp@a100 { /* MPP 2 */ }; mpp@a200 { /* MPP 3 */ }; mpp@a300 { /* MPP 4 */ }; mpp@a400 { /* MPP 5 */ }; mpp@a500 { /* MPP 6 */ }; mpp@a600 { /* MPP 7 */ }; mpp@a700 { /* MPP 8 */ }; }; &pma8084_l16 { status = "disabled"; }; &pma8084_l17 { status = "ok"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; qcom,init-voltage = <2850000>; }; &pma8084_l22 { status = "ok"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; qcom,init-voltage = <2850000>; }; &pcie0 { vreg-3.3-supply = <&vph_pwr_vreg>; };
