Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 7a833935 authored by Veera Sundaram Sankaran's avatar Veera Sundaram Sankaran
Browse files

ARM: dts: msm: Add support for cmd mode simulator panels 



Added cmd mode simulator panel configs and added it to the
respective targets. Panel booted in the cmd mode simulator
config mode need not have an actual panel connected, however it
needs a terminator card attached which should be configured to
send the hw vsync.

Change-Id: I5c3ab331ce3cac1c93aa7153b6b7283be0b71a0b
Signed-off-by: default avatarVeera Sundaram Sankaran <veeras@codeaurora.org>
parent c5564588

arch/arm/boot/dts/qcom/apq8084-mdss-panels.dtsi

+3 −0
Original line number Diff line number Diff line
@@ -20,3 +20,6 @@ 
#include "dsi-panel-sim-video.dtsi"

#include "dsi-panel-sim-dualmipi0-video.dtsi"

#include "dsi-panel-sim-dualmipi1-video.dtsi"

#include "dsi-panel-sim-cmd.dtsi"

#include "dsi-panel-sim-dualmipi0-cmd.dtsi"

#include "dsi-panel-sim-dualmipi1-cmd.dtsi"

arch/arm/boot/dts/qcom/dsi-panel-sim-cmd.dtsi

0 → 100644
+94 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2014, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&mdss_mdp {

	dsi_sim_cmd: qcom,mdss_dsi_sim_cmd{

		qcom,mdss-dsi-panel-name = "Simulator cmd mode dsi panel";

		qcom,mdss-dsi-panel-controller = <&mdss_dsi0>;

		qcom,mdss-dsi-panel-type = "dsi_cmd_mode";

		qcom,mdss-dsi-panel-destination = "display_1";

		qcom,mdss-dsi-panel-framerate = <60>;

		qcom,mdss-dsi-virtual-channel-id = <0>;

		qcom,mdss-dsi-stream = <0>;

		qcom,mdss-dsi-panel-width = <1080>;

		qcom,mdss-dsi-panel-height = <1920>;

		qcom,mdss-dsi-h-front-porch = <96>;

		qcom,mdss-dsi-h-back-porch = <64>;

		qcom,mdss-dsi-h-pulse-width = <16>;

		qcom,mdss-dsi-h-sync-skew = <0>;

		qcom,mdss-dsi-v-back-porch = <16>;

		qcom,mdss-dsi-v-front-porch = <4>;

		qcom,mdss-dsi-v-pulse-width = <1>;

		qcom,mdss-dsi-h-left-border = <0>;

		qcom,mdss-dsi-h-right-border = <0>;

		qcom,mdss-dsi-v-top-border = <0>;

		qcom,mdss-dsi-v-bottom-border = <0>;

		qcom,mdss-dsi-bpp = <24>;

		qcom,mdss-dsi-color-order = "rgb_swap_rgb";

		qcom,mdss-dsi-underflow-color = <0xff>;

		qcom,mdss-dsi-border-color = <0>;

		qcom,mdss-dsi-h-sync-pulse = <0>;

		qcom,mdss-dsi-traffic-mode = "non_burst_sync_event";

		qcom,mdss-dsi-lane-map = "lane_map_0123";

		qcom,mdss-dsi-bllp-eof-power-mode;

		qcom,mdss-dsi-bllp-power-mode;

		qcom,mdss-dsi-lane-0-state;

		qcom,mdss-dsi-lane-1-state;

		qcom,mdss-dsi-lane-2-state;

		qcom,mdss-dsi-lane-3-state;

		qcom,mdss-dsi-hor-line-idle = 	<0 40 256>,

						<40 120 128>,

						<120 240 64>;

		qcom,mdss-dsi-panel-timings = [cd 32 22 00 60 64 26 34 29 03

									04 00];

		qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>;

		qcom,mdss-dsi-t-clk-post = <0x03>;

		qcom,mdss-dsi-t-clk-pre = <0x27>;

		qcom,mdss-dsi-bl-max-level = <4095>;

		qcom,mdss-dsi-dma-trigger = "trigger_sw";

		qcom,mdss-dsi-mdp-trigger = "none";

		qcom,mdss-dsi-te-pin-select = <1>;

		qcom,mdss-dsi-wr-mem-start = <0x2c>;

		qcom,mdss-dsi-wr-mem-continue = <0x3c>;

		qcom,mdss-dsi-te-dcs-command = <1>;

		qcom,mdss-dsi-te-check-enable;

		qcom,mdss-dsi-te-using-te-pin;

		qcom,mdss-dsi-on-command = [29 01 00 00 00 00 02 b0 03

			05 01 00 00 0a 00 01 00

			/* Soft reset, wait 10ms */

			15 01 00 00 0a 00 02 3a 77

			/* Set Pixel format (24 bpp) */

			39 01 00 00 0a 00 05 2a 00 00 04 ff

			/* Set Column address */

			39 01 00 00 0a 00 05 2b 00 00 05 9f

			/* Set page address */

			15 01 00 00 0a 00 02 35 00

			/* Set tear on */

			39 01 00 00 0a 00 03 44 00 00

			/* Set tear scan line */

			15 01 00 00 0a 00 02 51 ff

			/* write display brightness */

			15 01 00 00 0a 00 02 53 24

			 /* write control brightness */

			15 01 00 00 0a 00 02 55 00

			/* CABC brightness */

			05 01 00 00 78 00 01 11

			/* exit sleep mode, wait 120ms */

			05 01 00 00 10 00 01 29];

			/* Set display on, wait 16ms */

		qcom,mdss-dsi-on-command-state = "dsi_lp_mode";

		qcom,mdss-dsi-off-command = [05 01 00 00 32 00 02 28 00

					05 01 00 00 78 00 02 10 00];

		qcom,mdss-dsi-off-command-state = "dsi_hs_mode";

		qcom,panel-ack-disabled;

	};

};

arch/arm/boot/dts/qcom/dsi-panel-sim-dualmipi0-cmd.dtsi

0 → 100644
+95 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2014, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&mdss_mdp {

	dsi_dual_sim_cmd_0: qcom,mdss_dsi_sim_cmd_0 {

		qcom,mdss-dsi-panel-name = "Sim dual 0 cmd mode dsi panel";

		qcom,mdss-dsi-panel-controller = <&mdss_dsi0>;

		qcom,mdss-dsi-panel-type = "dsi_cmd_mode";

		qcom,mdss-dsi-panel-destination = "display_1";

		qcom,mdss-dsi-panel-framerate = <60>;

		qcom,mdss-dsi-virtual-channel-id = <0>;

		qcom,mdss-dsi-stream = <0>;

		qcom,mdss-dsi-panel-width = <1280>;

		qcom,mdss-dsi-panel-height = <1440>;

		qcom,mdss-dsi-h-front-porch = <120>;

		qcom,mdss-dsi-h-back-porch = <44>;

		qcom,mdss-dsi-h-pulse-width = <16>;

		qcom,mdss-dsi-h-sync-skew = <0>;

		qcom,mdss-dsi-v-back-porch = <4>;

		qcom,mdss-dsi-v-front-porch = <8>;

		qcom,mdss-dsi-v-pulse-width = <4>;

		qcom,mdss-dsi-h-left-border = <0>;

		qcom,mdss-dsi-h-right-border = <0>;

		qcom,mdss-dsi-v-top-border = <0>;

		qcom,mdss-dsi-v-bottom-border = <0>;

		qcom,mdss-dsi-bpp = <24>;

		qcom,mdss-dsi-color-order = "rgb_swap_rgb";

		qcom,mdss-dsi-underflow-color = <0xff>;

		qcom,mdss-dsi-border-color = <0>;

		qcom,mdss-dsi-h-sync-pulse = <0>;

		qcom,mdss-dsi-traffic-mode = "non_burst_sync_event";

		qcom,mdss-dsi-lane-map = "lane_map_0123";

		qcom,mdss-dsi-bllp-eof-power-mode;

		qcom,mdss-dsi-bllp-power-mode;

		qcom,cmd-sync-wait-broadcast;

		qcom,mdss-dsi-lane-0-state;

		qcom,mdss-dsi-lane-1-state;

		qcom,mdss-dsi-lane-2-state;

		qcom,mdss-dsi-lane-3-state;

		qcom,mdss-dsi-hor-line-idle = 	<0 40 256>,

						<40 120 128>,

						<120 240 64>;

		qcom,mdss-dsi-panel-timings = [cd 32 22 00 60 64 26 34 29 03

									04 00];

		qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>;

		qcom,mdss-dsi-t-clk-post = <0x03>;

		qcom,mdss-dsi-t-clk-pre = <0x27>;

		qcom,mdss-dsi-bl-max-level = <4095>;

		qcom,mdss-dsi-dma-trigger = "trigger_sw";

		qcom,mdss-dsi-mdp-trigger = "none";

		qcom,mdss-dsi-te-pin-select = <1>;

		qcom,mdss-dsi-wr-mem-start = <0x2c>;

		qcom,mdss-dsi-wr-mem-continue = <0x3c>;

		qcom,mdss-dsi-te-dcs-command = <1>;

		qcom,mdss-dsi-te-check-enable;

		qcom,mdss-dsi-te-using-te-pin;

		qcom,mdss-dsi-on-command = [29 01 00 00 00 00 02 b0 03

			05 01 00 00 0a 00 01 00

			/* Soft reset, wait 10ms */

			15 01 00 00 0a 00 02 3a 77

			/* Set Pixel format (24 bpp) */

			39 01 00 00 0a 00 05 2a 00 00 04 ff

			/* Set Column address */

			39 01 00 00 0a 00 05 2b 00 00 05 9f

			/* Set page address */

			15 01 00 00 0a 00 02 35 00

			/* Set tear on */

			39 01 00 00 0a 00 03 44 00 00

			/* Set tear scan line */

			15 01 00 00 0a 00 02 51 ff

			/* write display brightness */

			15 01 00 00 0a 00 02 53 24

			 /* write control brightness */

			15 01 00 00 0a 00 02 55 00

			/* CABC brightness */

			05 01 00 00 78 00 01 11

			/* exit sleep mode, wait 120ms */

			05 01 00 00 10 00 01 29];

			/* Set display on, wait 16ms */

		qcom,mdss-dsi-on-command-state = "dsi_lp_mode";

		qcom,mdss-dsi-off-command = [05 01 00 00 32 00 02 28 00

					05 01 00 00 78 00 02 10 00];

		qcom,mdss-dsi-off-command-state = "dsi_hs_mode";

		qcom,panel-ack-disabled;

	};

};

arch/arm/boot/dts/qcom/dsi-panel-sim-dualmipi1-cmd.dtsi

0 → 100644
+96 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2014, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&mdss_mdp {

	dsi_dual_sim_cmd_1: qcom,mdss_dsi_sim_cmd_1 {

		qcom,mdss-dsi-panel-name = "Sim dual 1 cmd mode dsi panel";

		qcom,mdss-dsi-panel-controller = <&mdss_dsi1>;

		qcom,mdss-dsi-panel-type = "dsi_cmd_mode";

		qcom,mdss-dsi-panel-destination = "display_2";

		qcom,mdss-dsi-panel-framerate = <60>;

		qcom,mdss-dsi-virtual-channel-id = <0>;

		qcom,mdss-dsi-stream = <0>;

		qcom,mdss-dsi-panel-width = <1280>;

		qcom,mdss-dsi-panel-height = <1440>;

		qcom,mdss-dsi-h-front-porch = <120>;

		qcom,mdss-dsi-h-back-porch = <44>;

		qcom,mdss-dsi-h-pulse-width = <16>;

		qcom,mdss-dsi-h-sync-skew = <0>;

		qcom,mdss-dsi-v-back-porch = <4>;

		qcom,mdss-dsi-v-front-porch = <8>;

		qcom,mdss-dsi-v-pulse-width = <4>;

		qcom,mdss-dsi-h-left-border = <0>;

		qcom,mdss-dsi-h-right-border = <0>;

		qcom,mdss-dsi-v-top-border = <0>;

		qcom,mdss-dsi-v-bottom-border = <0>;

		qcom,mdss-dsi-bpp = <24>;

		qcom,mdss-dsi-color-order = "rgb_swap_rgb";

		qcom,mdss-dsi-underflow-color = <0xff>;

		qcom,mdss-dsi-border-color = <0>;

		qcom,mdss-dsi-h-sync-pulse = <0>;

		qcom,mdss-dsi-traffic-mode = "non_burst_sync_event";

		qcom,mdss-dsi-lane-map = "lane_map_0123";

		qcom,mdss-dsi-bllp-eof-power-mode;

		qcom,mdss-dsi-bllp-power-mode;

		qcom,cmd-sync-wait-broadcast;

		qcom,cmd-sync-wait-trigger;

		qcom,mdss-dsi-lane-0-state;

		qcom,mdss-dsi-lane-1-state;

		qcom,mdss-dsi-lane-2-state;

		qcom,mdss-dsi-lane-3-state;

		qcom,mdss-dsi-hor-line-idle = 	<0 40 256>,

						<40 120 128>,

						<120 240 64>;

		qcom,mdss-dsi-panel-timings = [cd 32 22 00 60 64 26 34 29 03

									04 00];

		qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>;

		qcom,mdss-dsi-t-clk-post = <0x03>;

		qcom,mdss-dsi-t-clk-pre = <0x27>;

		qcom,mdss-dsi-bl-max-level = <4095>;

		qcom,mdss-dsi-dma-trigger = "trigger_sw";

		qcom,mdss-dsi-mdp-trigger = "none";

		qcom,mdss-dsi-te-pin-select = <1>;

		qcom,mdss-dsi-wr-mem-start = <0x2c>;

		qcom,mdss-dsi-wr-mem-continue = <0x3c>;

		qcom,mdss-dsi-te-dcs-command = <1>;

		qcom,mdss-dsi-te-check-enable;

		qcom,mdss-dsi-te-using-te-pin;

		qcom,mdss-dsi-on-command = [29 01 00 00 00 00 02 b0 03

			05 01 00 00 0a 00 01 00

			/* Soft reset, wait 10ms */

			15 01 00 00 0a 00 02 3a 77

			/* Set Pixel format (24 bpp) */

			39 01 00 00 0a 00 05 2a 00 00 04 ff

			/* Set Column address */

			39 01 00 00 0a 00 05 2b 00 00 05 9f

			/* Set page address */

			15 01 00 00 0a 00 02 35 00

			/* Set tear on */

			39 01 00 00 0a 00 03 44 00 00

			/* Set tear scan line */

			15 01 00 00 0a 00 02 51 ff

			/* write display brightness */

			15 01 00 00 0a 00 02 53 24

			 /* write control brightness */

			15 01 00 00 0a 00 02 55 00

			/* CABC brightness */

			05 01 00 00 78 00 01 11

			/* exit sleep mode, wait 120ms */

			05 01 00 00 10 00 01 29];

			/* Set display on, wait 16ms */

		qcom,mdss-dsi-on-command-state = "dsi_lp_mode";

		qcom,mdss-dsi-off-command = [05 01 00 00 32 00 02 28 00

					05 01 00 00 78 00 02 10 00];

		qcom,mdss-dsi-off-command-state = "dsi_hs_mode";

		qcom,panel-ack-disabled;

	};

};

arch/arm/boot/dts/qcom/msm8226-mdss-panels.dtsi

+1 −0
Original line number Diff line number Diff line
@@ -19,3 +19,4 @@ 
#include "dsi-panel-jdi-1080p-video.dtsi"

#include "dsi-panel-nt35590-qvga-cmd.dtsi"

#include "dsi-panel-sim-video.dtsi"

#include "dsi-panel-sim-cmd.dtsi"