Loading Documentation/devicetree/bindings/arm/msm/msm-id.txt +19 −11 Original line number Diff line number Diff line * MSM-ID The qcom,msm-id entry specifies the MSM chipset, platform and hardware revision. It can optionally be an array of these to indicate multiple hardware that use the same device tree. It is expected that the bootloader will use this information at boot-up to decide which device tree to use when given multiple device trees, some of which may not be compatible with the actual hardware. It is the bootloader's responsibility to pass the correct device tree to the kernel. The qcom,msm-id entry specifies the MSM chipset, platform, hardware revision and optional manufactured foundry. It can optionally be an array of these to indicate multiple hardware that use the same device tree. It is expected that the bootloader will use this information at boot-up to decide which device tree to use when given multiple device trees, some of which may not be compatible with the actual hardware. It is the bootloader's responsibility to pass the correct device tree to the kernel. Format: It is expected that the qcom,msm-id entry be at the top level of the device tree structure. The format can take one of the two forms below: qcom,msm-id = <chipset_id, platform_id, rev_id> [, <c2, p2, r2> ...] qcom,msm-id = <chipset_id, rev_id> [, <c2, r2> ...] qcom,msm-id = <chipset_foundry_id, platform_id, rev_id> [, <c2, p2, r2> ...] qcom,msm-id = <chipset_foundry_id, rev_id> [, <c2, r2> ...] If the second format is used one must also define the board-id. The "chipset_foundry_id" consists of three fields as below: bits 0-15 = The unique MSM chipset id. bits 16-23 = The optional foundry id. If bootloader doesn't find a device tree which has exact matching foundry-id with hardware it chooses the device tree with foundry-id = 0. bits 24-31 = Reserved. Example: qcom,msm-id = <126 15 0>; qcom,msm-id = <0x1007e 15 0>; qcom,board-id= <15 2>; qcom,msm-id = <126 0>; qcom,msm-id = <0x1007e 0>; arch/arm/boot/dts/qcom/Makefile +5 −1 Original line number Diff line number Diff line Loading @@ -124,7 +124,11 @@ dtb-$(CONFIG_ARCH_MDM9630) += mdm9630-sim.dtb \ mdm9630-v1-cdp.dtb \ mdm9630-v1-mtp.dtb \ mdm9630-v2-cdp.dtb \ mdm9630-v2-mtp.dtb mdm9630-v2-mtp.dtb \ mdm9630-v2-tsmc-cdp.dtb \ mdm9630-v2-gf-cdp.dtb \ mdm9630-v2-tsmc-mtp.dtb \ mdm9630-v2-gf-mtp.dtb dtb-$(CONFIG_ARCH_MSMZIRC) += msmzirc-sim.dtb \ msmzirc-rumi.dtb \ msmzirc-cdp.dtb \ Loading arch/arm/boot/dts/qcom/mdm9630-v2-gf-cdp.dts 0 → 100644 +22 −0 Original line number Diff line number Diff line /* Copyright (c) 2014, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "mdm9630-v2-gf.dtsi" #include "mdm9630-cdp.dtsi" / { model = "Qualcomm Technologies, Inc. MDM 9630 v2 CDP"; compatible = "qcom,mdm9630-cdp", "qcom,mdm9630", "qcom,cdp"; qcom,board-id = <1 0>; }; arch/arm/boot/dts/qcom/mdm9630-v2-gf-mtp.dts 0 → 100644 +22 −0 Original line number Diff line number Diff line /* Copyright (c) 2014, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "mdm9630-v2-gf.dtsi" #include "mdm9630-mtp.dtsi" / { model = "Qualcomm Technologies, Inc. MDM 9630 v2 MTP"; compatible = "qcom,mdm9630-mtp", "qcom,mdm9630", "qcom,mtp"; qcom,board-id = <7 0>; }; arch/arm/boot/dts/qcom/mdm9630-v2-gf.dtsi 0 → 100644 +19 −0 Original line number Diff line number Diff line /* Copyright (c) 2014, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include "mdm9630-v2.dtsi" / { qcom,msm-id = <0x100bb 0x20000>, <0x100e3 0x20000>, <0x100e4 0x20000>, <0x100e5 0x20000>, <0x100e6 0x20000>, <0x100e7 0x20000>; }; Loading
Documentation/devicetree/bindings/arm/msm/msm-id.txt +19 −11 Original line number Diff line number Diff line * MSM-ID The qcom,msm-id entry specifies the MSM chipset, platform and hardware revision. It can optionally be an array of these to indicate multiple hardware that use the same device tree. It is expected that the bootloader will use this information at boot-up to decide which device tree to use when given multiple device trees, some of which may not be compatible with the actual hardware. It is the bootloader's responsibility to pass the correct device tree to the kernel. The qcom,msm-id entry specifies the MSM chipset, platform, hardware revision and optional manufactured foundry. It can optionally be an array of these to indicate multiple hardware that use the same device tree. It is expected that the bootloader will use this information at boot-up to decide which device tree to use when given multiple device trees, some of which may not be compatible with the actual hardware. It is the bootloader's responsibility to pass the correct device tree to the kernel. Format: It is expected that the qcom,msm-id entry be at the top level of the device tree structure. The format can take one of the two forms below: qcom,msm-id = <chipset_id, platform_id, rev_id> [, <c2, p2, r2> ...] qcom,msm-id = <chipset_id, rev_id> [, <c2, r2> ...] qcom,msm-id = <chipset_foundry_id, platform_id, rev_id> [, <c2, p2, r2> ...] qcom,msm-id = <chipset_foundry_id, rev_id> [, <c2, r2> ...] If the second format is used one must also define the board-id. The "chipset_foundry_id" consists of three fields as below: bits 0-15 = The unique MSM chipset id. bits 16-23 = The optional foundry id. If bootloader doesn't find a device tree which has exact matching foundry-id with hardware it chooses the device tree with foundry-id = 0. bits 24-31 = Reserved. Example: qcom,msm-id = <126 15 0>; qcom,msm-id = <0x1007e 15 0>; qcom,board-id= <15 2>; qcom,msm-id = <126 0>; qcom,msm-id = <0x1007e 0>;
arch/arm/boot/dts/qcom/Makefile +5 −1 Original line number Diff line number Diff line Loading @@ -124,7 +124,11 @@ dtb-$(CONFIG_ARCH_MDM9630) += mdm9630-sim.dtb \ mdm9630-v1-cdp.dtb \ mdm9630-v1-mtp.dtb \ mdm9630-v2-cdp.dtb \ mdm9630-v2-mtp.dtb mdm9630-v2-mtp.dtb \ mdm9630-v2-tsmc-cdp.dtb \ mdm9630-v2-gf-cdp.dtb \ mdm9630-v2-tsmc-mtp.dtb \ mdm9630-v2-gf-mtp.dtb dtb-$(CONFIG_ARCH_MSMZIRC) += msmzirc-sim.dtb \ msmzirc-rumi.dtb \ msmzirc-cdp.dtb \ Loading
arch/arm/boot/dts/qcom/mdm9630-v2-gf-cdp.dts 0 → 100644 +22 −0 Original line number Diff line number Diff line /* Copyright (c) 2014, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "mdm9630-v2-gf.dtsi" #include "mdm9630-cdp.dtsi" / { model = "Qualcomm Technologies, Inc. MDM 9630 v2 CDP"; compatible = "qcom,mdm9630-cdp", "qcom,mdm9630", "qcom,cdp"; qcom,board-id = <1 0>; };
arch/arm/boot/dts/qcom/mdm9630-v2-gf-mtp.dts 0 → 100644 +22 −0 Original line number Diff line number Diff line /* Copyright (c) 2014, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "mdm9630-v2-gf.dtsi" #include "mdm9630-mtp.dtsi" / { model = "Qualcomm Technologies, Inc. MDM 9630 v2 MTP"; compatible = "qcom,mdm9630-mtp", "qcom,mdm9630", "qcom,mtp"; qcom,board-id = <7 0>; };
arch/arm/boot/dts/qcom/mdm9630-v2-gf.dtsi 0 → 100644 +19 −0 Original line number Diff line number Diff line /* Copyright (c) 2014, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include "mdm9630-v2.dtsi" / { qcom,msm-id = <0x100bb 0x20000>, <0x100e3 0x20000>, <0x100e4 0x20000>, <0x100e5 0x20000>, <0x100e6 0x20000>, <0x100e7 0x20000>; };
