Merge "mdss: mhl3: Add driver for MHL Transmitter"

config MEDIA_DATA_TUNNEL_SUPPORT

	bool

	prompt "MHL Media Data Tunneling Support"

	default n

	---help---

	  This option controls whether or not Silicon Image MHL transmitter

	  drivers include support for Media Data Tunneling (MDT).  MDT

	  support enables HID events generated by HID devices attached to

	  an MDT capable MHL sink to be passed over the MHL connection

	  to the system.

config SII8620_MHL_TX

	tristate 

	prompt "Silicon Image 8620 HDMI to MHL Tx"

	depends on I2C

	default n

#

# Makefile for the Silicon Image 8620 MHL TX device driver

#

# example invocations:	

#	For regular Linux builds

#	make ARCH=arm CROSS_COMPILE=arm-angstrom-linux-gnueabi- clean debug

#	make ARCH=arm CROSS_COMPILE=arm-angstrom-linux-gnueabi- clean release

#	make ARCH=arm CROSS_COMPILE=arm-angstrom-linux-gnueabi- clean clean

#

#	For Android driver builds - Specify different tool-chain and kernel revision

#	export PATH=~/rowboat-android/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin:$PATH

#	make ARCH=arm KERNELPATH=~/rowboat-android/kernel CROSS_COMPILE=arm-eabi- clean debug

#	make ARCH=arm KERNELPATH=~/rowboat-android/kernel CROSS_COMPILE=arm-eabi- clean release

#	make ARCH=arm KERNELPATH=~/rowboat-android/kernel CROSS_COMPILE=arm-eabi- clean clean

#	

#	For Android 4.0.3 (ICS):

#	export PATH=~/rowboat-android/TI-Android-ICS-4.0.3_AM37x_3.0.0/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin:$PATH

#	make ARCH=arm KERNELPATH=~/rowboat-android/TI-Android-ICS-4.0.3_AM37x_3.0.0/kernel CROSS_COMPILE=arm-eabi- clean debug

#	make ARCH=arm KERNELPATH=~/rowboat-android/TI-Android-ICS-4.0.3_AM37x_3.0.0/kernel CROSS_COMPILE=arm-eabi- clean release

#	make ARCH=arm KERNELPATH=~/rowboat-android/TI-Android-ICS-4.0.3_AM37x_3.0.0/kernel CROSS_COMPILE=arm-eabi- clean clean

#

#	For Android 4.2.2 (JB) Linaro release 13.04 for PandaBoard:

#	export PATH=$PATH:~/Linaro-13.04/android/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7-linaro/bin

#	make ARCH=arm KERNELPATH=~/Linaro-13.04/android/kernel/linaro/pandaboard CROSS_COMPILE=arm-eabi- clean debug

#	make ARCH=arm KERNELPATH=~/Linaro-13.04/android/kernel/linaro/pandaboard CROSS_COMPILE=arm-eabi- clean release

#	make ARCH=arm KERNELPATH=~/Linaro-13.04/android/kernel/linaro/pandaboard CROSS_COMPILE=arm-eabi- clean clean

#	

# Silicon Image uses DEVELOPER_BUILD_ID for sandbox build to be identified during testing.

ifneq ($(DEVELOPER_BUILD_ID),)

DEVELOPER_BUILD_COPY=cp sii$(MHL_PRODUCT_NUM)drv.ko sii$(MHL_PRODUCT_NUM)drv$(DEVELOPER_BUILD_ID).ko

endif

ifneq ($(KERNELRELEASE),)

# kbuild part of makefile

#

# color annotations to use instead of leading newline chars

ccflags-y += -DANSI_COLORS

ccflags-y += -DBUILD_NUM_STRING=\"$(MHL_BUILD_NUM)$(DEVELOPER_BUILD_ID)\"

ccflags-y += -DMHL_PRODUCT_NUM=$(MHL_PRODUCT_NUM)

ccflags-y += -DMHL_DRIVER_NAME=\"sii$(MHL_PRODUCT_NUM)drv\"

ccflags-y += -DMHL_DEVICE_NAME=\"sii-$(MHL_PRODUCT_NUM)\"

# Support Device Tree?

ifeq ($(DT_SUPPORT),1)

ccflags-y += -DSIMG_USE_DTS

endif

# Kernel level supported

ccflags-y += -DLINUX_KERNEL_VER=$(LINUX_KERNEL_VER)

#

# FORCE_OCBUS_FOR_ECTS is used to identify code added for ECTS temporary fix that prohibits use of eCBUS.

# in addition module parameter force_ocbus_for_ects needs to be set as 1 to achieve ECTS operation.

ccflags-y += -DFORCE_OCBUS_FOR_ECTS

#

# PC_MODE_VIDEO_TIMING_SUPPORT is for cases where no VIC is available from either AVIF or VSIF.

ccflags-y += -DPC_MODE_VIDEO_TIMING_SUPPORT

#

# MANUAL_INFO_FRAME_CLEAR_AT_HPD_DRIVEN_HIGH is to clear all infoframes 

#	upon driving HPD high instead of when SCDT goes low.

ccflags-y += -DMANUAL_INFO_FRAME_CLEAR_AT_HPD_DRIVEN_HIGH

#

# MEDIA_DATA_TUNNEL_SUPPORT

#	Default is enabled. Comment next line to disable.

ccflags-y += -DMEDIA_DATA_TUNNEL_SUPPORT

#

# Include REMOTE BUTTON PROTOCOL code or not

ccflags-$(CONFIG_DEBUG_DRIVER) += -DINCLUDE_RBP=1

ccflags-$(CONFIG_DEBUG_DRIVER) += -DINCLUDE_HID=$(INCLUDE_HID)

# Example of use of SiI6031 is wrapped under the following definition

# It also illustrates how 8620 driver may be integrated into MSM platform

# the flag should be disabled if not building for MSM

ccflags-$(CONFIG_DEBUG_DRIVER) += -DINCLUDE_SII6031=$(INCLUDE_SII6031)

#

# MANUAL_EDID_FETCH uses DDC master directly, instead of h/w automated method.

ccflags-y += -DMANUAL_EDID_FETCH

# If CI2CA pin is pulled HIGH, you must define the following flag

#ccflags-y += -DALT_I2C_ADDR

# PRINT_DDC_ABORTS enables logging of all DDC_ABORTs. Default "disabled" - helps MHL2 hot plug.

# Enable only if you must for debugging. 

#ccflags-y += -DPRINT_DDC_ABORTS

# CoC_FSM_MONITORING exports CoC state machine to GPIO pins

# Enable only if you must for debugging. 

ccflags-y += -DCoC_FSM_MONITORING -DBIST_MONITORING

#BIST_DONE_DEBUG adds register dump prior to RAP{CBUS_MODE_UP}

#ccflags-y += -DBIST_DONE_DEBUG

# For si_emsc_hid-mt.c

ccflags-y += -Idrivers/hid

# Optimzations and/or workaround

ccflags-y += -DDISABLE_SPI_DMA

ccflags-y += -DUSE_SPIOPTIMIZE

ccflags-y += -DGCS_QUIRKS_FOR_SIMG

ccflags-$(CONFIG_DEBUG_DRIVER) += -DDEBUG 

# Enable VBUS sense and related operations

ccflags-$(CONFIG_DEBUG_DRIVER) += -DENABLE_VBUS_SENSE

#support for DVI sources and sinks in MHL3 mode.

ccflags-$(CONFIG_DEBUG_DRIVER) += -DMHL3_DVI_SUPPORT

#add HDMI VSDB to upstream EDID when downstream sink is DVI

#ccflags-$(CONFIG_DEBUG_DRIVER) += -DMHL3_DVI_SUPPORT_FORCE_HDMI

#

# the next lines are optional - they enable greater verbosity in debug output

#ccflags-$(CONFIG_DEBUG_DRIVER) += -DENABLE_EDID_DEBUG_PRINT

#ccflags-$(CONFIG_DEBUG_DRIVER) += -DENABLE_DUMP_INFOFRAME

#

# uncomment next line to prevent EDID parsing. Useful for debugging.

#ccflags-$(CONFIG_DEBUG_DRIVER) += -DEDID_PASSTHROUGH

obj-$(CONFIG_SII$(MHL_PRODUCT_NUM)_MHL_TX) += sii$(MHL_PRODUCT_NUM)drv.o

sii$(MHL_PRODUCT_NUM)drv-objs  += platform.o

sii$(MHL_PRODUCT_NUM)drv-objs  += mhl_linux_tx.o

sii$(MHL_PRODUCT_NUM)drv-objs  += mhl_rcp_inputdev.o

sii$(MHL_PRODUCT_NUM)drv-objs  += mhl_rbp_inputdev.o

sii$(MHL_PRODUCT_NUM)drv-objs  += mhl_supp.o

sii$(MHL_PRODUCT_NUM)drv-objs  += si_8620_drv.o

sii$(MHL_PRODUCT_NUM)drv-objs  += si_mhl2_edid_3d.o

sii$(MHL_PRODUCT_NUM)drv-objs  += si_mdt_inputdev.o

ifeq ($(INCLUDE_HID),1)

sii$(MHL_PRODUCT_NUM)drv-objs  += si_emsc_hid.o

sii$(MHL_PRODUCT_NUM)drv-objs  += si_emsc_hid-mt.o

endif

else

# Normal Makefile

# If a kernel is not specified, default to the kernel used with Android Ice Cream Sandwich

ifneq ($(KERNELPATH),)

KERNELDIR=$(KERNELPATH)

else

KERNELDIR=~/src/linux-2.6.36

#KERNELDIR=~/src/Android_ICS/kernel

endif

ARCH=arm

PWD := $(shell pwd)

.PHONY: clean

release:

	make -C $(KERNELDIR) M=$(PWD) CONFIG_SII$(MHL_PRODUCT_NUM)_MHL_TX=m CONFIG_MEDIA_DATA_TUNNEL_SUPPORT=y modules

	$(CROSS_COMPILE)strip --strip-debug sii$(MHL_PRODUCT_NUM)drv.ko

	$(DEVELOPER_BUILD_COPY)

debug:

	rm -f platform.o

	make -C $(KERNELDIR) M=$(PWD) CONFIG_SII$(MHL_PRODUCT_NUM)_MHL_TX=m CONFIG_MEDIA_DATA_TUNNEL_SUPPORT=y CONFIG_DEBUG_DRIVER=y modules

	$(DEVELOPER_BUILD_COPY)

clean:

	make -C $(KERNELDIR) M=$(PWD) CONFIG_SII$(MHL_PRODUCT_NUM)_MHL_TX=m clean

endif

/*

 * SiI8620 Linux Driver

 *

 * Copyright (C) 2013-2014 Silicon Image, Inc.

 *

 * This program is free software; you can redistribute it and/or

 * modify it under the terms of the GNU General Public License as

 * published by the Free Software Foundation version 2.

 * This program is distributed AS-IS WITHOUT ANY WARRANTY of any

 * kind, whether express or implied; INCLUDING without the implied warranty

 * of MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE or NON-INFRINGEMENT.

 * See the GNU General Public License for more details at

 * http://www.gnu.org/licenses/gpl-2.0.html.

 */

#if !defined(MHL_DEVICE_CFG_H)

#define MHL_DEVICE_CFG_H

#include "si_app_devcap.h"

/*

 * This file contains SiI8620 driver and device configuration information

 *

 */

/*

 * Determine XDEVCAPS configurations allowed by this driver

 */

#if (INCLUDE_HID == 1)

#define XDEVCAP_VAL_DEV_ROLES		(MHL_XDC_DEV_HOST | MHL_XDC_HID_HOST)

#else

#define XDEVCAP_VAL_DEV_ROLES		MHL_XDC_DEV_HOST

#endif

#define XDEVCAP_VAL_LOG_DEV_MAPX	MHL_XDC_LD_PHONE

#endif /* if !defined(MHL_DEVICE_CFG_H) */