[NET]: Remove references to net-modules.txt.

ports 0x300, 0x280 and 0x310 (in that order).  If no IRQ is given, the driver

will try to probe for it.

The driver can be used as a loadable module.  See net-modules.txt for details

of the parameters it can take.  

The driver can be used as a loadable module.

Theoretically, one instance of the driver can now run multiple cards,

in the standard way (when loading a module, say "modprobe 3c505

	  read the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  This module will

	  To compile this driver as a module, choose M here. This module will

	  be called mac89x0.

config MACSONIC

	  one of these say Y and read the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  This module will

	  To compile this driver as a module, choose M here. This module will

	  be called macsonic.

config MACMACE

	  have problems.  Some people suggest to ping ("man ping") a nearby

	  machine every minute ("man cron") when using this card.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called 3c501.

config EL2

	  the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called 3c503.

config ELPLUS

	  this type, say Y and read the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called 3c505.

config EL16

	  the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called 3c507.

config EL3

	  setup disk to disable Plug & Play mode, and to select the default

	  media type.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called 3c509.

config 3C515

	  network card, say Y and read the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called 3c515.

config ELMC

	  the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called 3c523.

config ELMC_II

	  the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called 3c527.

config VORTEX

	  <file:Documentation/networking/vortex.txt> and in the comments at

	  the beginning of <file:drivers/net/3c59x.c>.

	  To compile this support as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.

	  To compile this support as a module, choose M here.

config TYPHOON

	tristate "3cr990 series \"Typhoon\" support"

	  the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called typhoon.

config LANCE

	  the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called wd.

config ULTRAMCA

	  an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,

	  available from <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called smc-mca.

config ULTRA

	  this but keep it in mind if you have such a SCSI card and have

	  problems.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called smc-ultra.

config ULTRA32

	  the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called smc-ultra32.

config BFIN_MAC

	  <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,

	  available from <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called smc9194.

config SMC91X

	  This driver is also available as a module ( = code which can be

	  inserted in and removed from the running kernel whenever you want).

	  The module will be called smc91x.  If you want to compile it as a

	  module, say M here and read <file:Documentation/kbuild/modules.txt>

	  as well as <file:Documentation/networking/net-modules.txt>.

	  module, say M here and read <file:Documentation/kbuild/modules.txt>.

config NET_NETX

	tristate "NetX Ethernet support"

	help

	  This is support for the Hilscher netX builtin Ethernet ports

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called netx-eth.

config DM9000

	---help---

	  Support for DM9000 chipset.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module will be

	  called dm9000.

	  To compile this driver as a module, choose M here.  The module

	  will be called dm9000.

config SMC911X

	tristate "SMSC LAN911[5678] support"

	  <http://www.tldp.org/docs.html#howto>. Note that this is still

	  experimental code.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called ni5010.

config NI52

	  the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called ni52.

config NI65

	  the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called ni65.

source "drivers/net/tulip/Kconfig"

	  the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called at1700.

config DEPCA

	  <http://www.tldp.org/docs.html#howto> as well as

	  <file:drivers/net/depca.c>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called depca.

config HP100

	  the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called hp100.

config NET_ISA

	  the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called e2100.

config EWRK3

	  well as the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called ewrk3.

config EEXPRESS

	  because the driver was very unreliable. We now have a new driver

	  that should do better.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called eexpress.

config EEXPRESS_PRO

	  driver.  Please read the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called eepro.

config HPLAN_PLUS

	  the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called hp-plus.

config HPLAN

	  the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called hp.

config LP486E

	  the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called eth16i.

config NE2000

	  laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",

	  below.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called ne.

config ZNET

	  is for you, read the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called seeq8005.

config NE2_MCA

	  the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called ne2.

config IBMLANA

	  CONFIG_MCA to use this driver.  It is both available as an in-kernel

	  driver and as a module.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The only

	  To compile this driver as a module, choose M here. The only

	  currently supported card is the IBM LAN Adapter/A for Ethernet.  It

	  will both support 16K and 32K memory windows, however a 32K window

	  gives a better security against packet losses.  Usage of multiple

	  This driver supports virtual ethernet adapters on newer IBM iSeries

	  and pSeries systems.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module will

	  To compile this driver as a module, choose M here. The module will

	  be called ibmveth.

source "drivers/net/ibm_emac/Kconfig"

	  answer Y here and read the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called pcnet32.

config PCNET32_NAPI

	  answer Y here and read the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called amd8111e.

config AMD8111E_NAPI

	  the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called ac3200.

config APRICOT

	  read the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module will be

	  called apricot.

	  To compile this driver as a module, choose M here. The module

	  will be called apricot.

config B44

	tristate "Broadcom 440x/47xx ethernet support"

	  or M and read the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module will be

	  called b44.

	  To compile this driver as a module, choose M here. The module

	  will be called b44.

# Auto-select SSB PCI-HOST support, if possible

config B44_PCI_AUTOSELECT

	  read the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module will be

	  called forcedeth.

	  To compile this driver as a module, choose M here. The module

	  will be called forcedeth.

config FORCEDETH_NAPI

	bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"

	  <http://www.tldp.org/docs.html#howto> as well as

	  <file:Documentation/networking/cs89x0.txt>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module will be

	  called cs89x0.

	  To compile this driver as a module, choose M here. The module

	  will be called cs89x0.

config TC35815

	tristate "TOSHIBA TC35815 Ethernet support"

	  card, say Y and read the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module

	  To compile this driver as a module, choose M here. The module

	  will be called eepro100.

	  More specific information on configuring the driver is in 

	  <file:Documentation/networking/e100.txt>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module

	  To compile this driver as a module, choose M here. The module

	  will be called e100.

config LNE390

	  the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module

	  To compile this driver as a module, choose M here. The module

	  will be called lne390.

config FEALNX

	  NetVin NV5000SC   Via 86C926      SureCom NE34   Winbond

	  Holtek HT80232    Holtek HT80229

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module

	  To compile this driver as a module, choose M here. The module

	  will be called ne2k-pci.

config NE3210

	  <http://www.tldp.org/docs.html#howto>.  Note that this driver

	  will NOT WORK for NE3200 cards as they are completely different.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module

	  To compile this driver as a module, choose M here. The module

	  will be called ne3210.

config ES3210

	  the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module

	  To compile this driver as a module, choose M here. The module

	  will be called es3210.

config 8139CP

	  Compaq NetFlex and Olicom cards.  Please read the file

	  <file:Documentation/networking/tlan.txt> for more details.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module

	  To compile this driver as a module, choose M here. The module

	  will be called tlan.

	  Please email feedback to <torben.mathiasen@compaq.com>.

	  More specific information on configuring the driver is in 

	  <file:Documentation/networking/e1000.txt>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module

	  To compile this driver as a module, choose M here. The module

	  will be called e1000.

config E1000_NAPI

	  More specific information on configuring the driver is in

	  <file:Documentation/networking/e1000e.txt>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module

	  To compile this driver as a module, choose M here. The module

	  will be called e1000e.

source "drivers/net/ixp2000/Kconfig"

	  the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module will be

	  To compile this driver as a module, choose M here. The module will be

	  called hamachi.

config YELLOWFIN

	  More specific information on configuring the driver is in

	  <file:Documentation/networking/ixgbe.txt>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module

	  To compile this driver as a module, choose M here. The module

	  will be called ixgbe.

config IXGB

	  More specific information on configuring the driver is in 

	  <file:Documentation/networking/ixgb.txt>.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module

	  To compile this driver as a module, choose M here. The module

	  will be called ixgb.

config IXGB_NAPI

	  <http://www.myri.com/scs/download-Myri10GE.html>

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module

	  To compile this driver as a module, choose M here. The module

	  will be called myri10ge.

config NETXEN_NIC

	  with the PLIP support in Linux versions 1.0.x.  This option enlarges

	  your kernel by about 8 KB.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module will be

	  called plip.  If unsure, say Y or M, in case you buy a laptop

	  later.

	  To compile this driver as a module, choose M here. The module

	  will be called plip. If unsure, say Y or M, in case you buy

	  a laptop later.

config PPP

	tristate "PPP (point-to-point protocol) support"

	  If you said Y to "Version information on all symbols" above, then

	  you cannot compile the PPP driver into the kernel; you can then only

	  compile it as a module. To compile this driver as a module, choose M

	  here and read <file:Documentation/networking/net-modules.txt>.

	  The module will be called ppp_generic.

	  here. The module will be called ppp_generic.

config PPP_MULTILINK

	bool "PPP multilink support (EXPERIMENTAL)"

	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP

	  support will enlarge your kernel by about 4 KB. If unsure, say N.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>. The module will be

	  called slip.

	  To compile this driver as a module, choose M here. The module

	  will be called slip.

config SLIP_COMPRESSED

	bool "CSLIP compressed headers"

	  from <http://www.tldp.org/docs.html#howto>(even though ARCnet

	  is not really Ethernet).

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module will

	  To compile this driver as a module, choose M here. The module will

	  be called arcnet.

if ARCNET

	  have always used the old ARCnet driver without knowing what type of

	  card you had, this is probably the one for you.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module will

	  To compile this driver as a module, choose M here. The module will

	  be called com90xx.

config ARCNET_COM90xxIO

	  the normal driver. Only use it if your card doesn't support shared

	  memory.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module will

	  To compile this driver as a module, choose M here. The module will

	  be called com90io.

config ARCNET_RIM_I

	  driver is completely untested, so if you have one of these cards,

	  please mail <dwmw2@infradead.org>, especially if it works!

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module will

	  To compile this driver as a module, choose M here. The module will

	  be called arc-rimi.

config ARCNET_COM20020

	  things as promiscuous mode, so packet sniffing is possible, and

	  extra diagnostic information.

	  To compile this driver as a module, choose M here and read

	  <file:Documentation/networking/net-modules.txt>.  The module will

	  To compile this driver as a module, choose M here. The module will

	  be called com20020.

config ARCNET_COM20020_ISA