Merge "ARM: dts: Add support for camera for msm8916 target" (4ef2949d) · Commits · e / devices / android_kernel_sony_msm8994

arch/arm/boot/dts/qcom/msm8916-camera-sensor-cdp.dtsi

+43 −0

Original line number	Diff line number	Diff line
		@@ -36,6 +36,49 @@
		qcom,cci-master = <0>;
		};

		qcom,camera@20 {
		compatible = "qcom,imx135";
		reg = <0x20>;
		qcom,slave-id = <0x20 0x0016 0x0135>;
		qcom,csiphy-sd-index = <0>;
		qcom,csid-sd-index = <0>;
		qcom,actuator-src = <&actuator1>;
		qcom,mount-angle = <90>;
		qcom,sensor-name = "imx135";
		cam_vana-supply = <&pm8916_l17>;
		cam_vio-supply = <&pm8916_l6>;
		cam_vaf-supply = <&pm8916_l10>;
		qcom,cam-vreg-name = "cam_vio", "cam_vana",
		"cam_vaf";
		qcom,cam-vreg-type = <1 0 0>;
		qcom,cam-vreg-min-voltage = <0 2850000 2800000>;
		qcom,cam-vreg-max-voltage = <0 2850000 2800000>;
		qcom,cam-vreg-op-mode = <0 80000 100000>;
		qcom,gpio-no-mux = <0>;
		pinctrl-states = "default", "suspend";
		pinctrl-0 = <&cam_sensor_rear_default>;
		pinctrl-1 = <&cam_sensor_rear_sleep>;
		gpios = <&msm_gpio 26 0>,
		<&msm_gpio 35 0>,
		<&msm_gpio 34 0>;
		qcom,gpio-reset = <1>;
		qcom,gpio-standby = <2>;
		qcom,gpio-req-tbl-num = <0 1 2>;
		qcom,gpio-req-tbl-flags = <1 0 0>;
		qcom,gpio-req-tbl-label = "CAMIF_MCLK",
		"CAM_RESET1",
		"CAM_STANDBY";
		qcom,gpio-set-tbl-num = <1 1>;
		qcom,gpio-set-tbl-flags = <0 2>;
		qcom,gpio-set-tbl-delay = <1000 30000>;
		qcom,csi-lane-assign = <0x4320>;
		qcom,csi-lane-mask = <0x1F>;
		qcom,sensor-position = <0>;
		qcom,sensor-mode = <0>;
		qcom,sensor-type = <0>;
		qcom,cci-master = <0>;
		status = "ok";
		};

		qcom,camera@78 {
		compatible = "ovti,ov5645";

+1 −0

Original line number	Diff line number	Diff line
		@@ -16,6 +16,7 @@

		#include "msm8916.dtsi"
		#include "msm8916-pinctrl.dtsi"
		#include "msm8916-camera-sensor-cdp.dtsi"

		/ {
		model = "Qualcomm Technologies, Inc. MSM8916 Simulator";

+2 −0