Merge "msm: msm8916: camera: add dtsi for 8916 TY devices."

/*

 * Copyright (c) 2014, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */

&soc {

	led_flash0: qcom,camera-led-flash {

		cell-index = <0>;

		compatible = "qcom,camera-led-flash";

		qcom,flash-type = <3>;

	};

};

&cci {

	actuator0: qcom,actuator@6e {

		cell-index = <3>;

		reg = <0x6c>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

	};

	eeprom0: qcom,eeprom@6b{

		cell-index = <0>;

		reg = <0x6b>;

		qcom,eeprom-name = "sunny_q5v22e";

		compatible = "qcom,eeprom";

		qcom,slave-addr = <0x6c>;

		qcom,cci-master = <0>;

		qcom,num-blocks = <7>;

		qcom,page0 = <1 0x0100 2 0x01 1 1>;

		qcom,poll0 = <0 0x0 2 0 1 1>;

		qcom,mem0 = <0 0x0 2 0 1 0>;

		qcom,page1 = <1 0x3d84 2 0xc0 1 1>;

		qcom,poll1 = <0 0x0 2 0 1 1>;

		qcom,mem1 = <0 0x0 2 0 1 0>;

		qcom,page2 = <1 0x3d85 2 0x00 1 1>;

		qcom,poll2 = <0 0x0 2 0 1 1>;

		qcom,mem2 = <0 0x0 2 0 1 0>;

		qcom,page3 = <1 0x3d86 2 0x0f 1 1>;

		qcom,pageen3 = <1 0x3d81 2 0x01 1 10>;

		qcom,poll3 = <0 0x0 2 0 1 1>;

		qcom,mem3 = <16 0x3d00 2 0 1 0>;

		qcom,page4 = <1 0x3d84 2 0xc0 1 1>;

		qcom,poll4 = <0 0x0 2 0 1 1>;

		qcom,mem4 = <0 0x0 2 0 1 0>;

		qcom,page5 = <1 0x3d85 2 0x10 1 1>;

		qcom,poll5 = <0 0x0 2 0 1 1>;

		qcom,mem5 = <0 0x0 2 0 1 0>;

		qcom,page6 = <1 0x3d86 2 0x1f 1 1>;

		qcom,pageen6 = <1 0x3d81 2 0x01 1 10>;

		qcom,poll6 = <0 0x0 2 0 1 1>;

		qcom,mem6 = <16 0x3d00 2 0 1 0>;

		cam_vdig-supply = <&pm8916_l2>;

		cam_vana-supply = <&pm8916_l17>;

		cam_vio-supply = <&pm8916_l6>;

		cam_vaf-supply = <&pm8916_l10>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

							"cam_vaf";

		qcom,cam-vreg-type = <0 1 0 0>;

		qcom,cam-vreg-min-voltage = <2100000 0 2850000 2800000>;

		qcom,cam-vreg-max-voltage = <2100000 0 2850000 2800000>;

		qcom,cam-vreg-op-mode = <200000 0 80000 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_default &cam_sensor_rear_default>;

		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep>;

		gpios = <&msm_gpio 26 0>,

			<&msm_gpio 35 0>,

			<&msm_gpio 34 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2 >;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK",

			"CAM_RESET1",

			"CAM_STANDBY";

		qcom,cam-power-seq-type = "sensor_vreg",

			"sensor_gpio", "sensor_gpio",

			"sensor_clk";

		qcom,cam-power-seq-val = "cam_vaf",

			"sensor_gpio_reset",

			"sensor_gpio_standby",

			"sensor_cam_mclk" ;

		qcom,cam-power-seq-cfg-val = <1 1 1 23880000>;

		qcom,cam-power-seq-delay = <1 10 10 5>;

		clocks = <&clock_gcc clk_mclk0_clk_src>,

			<&clock_gcc clk_gcc_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};

	qcom,camera@0 {

		cell-index = <0>;

		compatible = "qcom,camera";

		reg = <0x0>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <90>;

		qcom,actuator-src = <&actuator0>;

		qcom,eeprom-src = <&eeprom0>;

		cam_vdig-supply = <&pm8916_l2>;

		cam_vana-supply = <&pm8916_l17>;

		cam_vio-supply = <&pm8916_l6>;

		cam_vaf-supply = <&pm8916_l10>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

							"cam_vaf";

		qcom,cam-vreg-type = <0 1 0 0>;

		qcom,cam-vreg-min-voltage = <1200000 0 2850000 2800000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2850000 2800000>;

		qcom,cam-vreg-op-mode = <200000 0 80000 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_default &cam_sensor_rear_default>;

		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep>;

		gpios = <&msm_gpio 26 0>,

			<&msm_gpio 35 0>,

			<&msm_gpio 34 0>,

			<&msm_gpio 120 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-af-pwdm = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK",

			"CAM_RESET1",

			"CAM_STANDBY",

			"CAM_AF_PWDM";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		qcom,mclk-23880000;

		status = "ok";

		clocks = <&clock_gcc clk_mclk0_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};

	qcom,camera@1 {

		cell-index = <1>;

		compatible = "qcom,camera";

		reg = <0x1>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <90>;

		cam_vdig-supply = <&pm8916_l2>;

		cam_vana-supply = <&pm8916_l17>;

		cam_vio-supply = <&pm8916_l6>;

		cam_vaf-supply = <&pm8916_l10>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

							"cam_vaf";

		qcom,cam-vreg-type = <0 1 0 0>;

		qcom,cam-vreg-min-voltage = <1200000 0 2850000 2800000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2850000 2800000>;

		qcom,cam-vreg-op-mode = <200000 0 80000 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_default &cam_sensor_front_default>;

		pinctrl-1 = <&cam_sensor_mclk1_sleep &cam_sensor_front_sleep>;

		gpios = <&msm_gpio 27 0>,

			<&msm_gpio 28 0>,

			<&msm_gpio 33 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK",

			"CAM_RESET",

			"CAM_STANDBY";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		qcom,mclk-23880000;

		status = "ok";

		clocks = <&clock_gcc clk_mclk1_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk1_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};

};

#include "msm8916-qrd.dtsi"

#include "dsi-panel-otm8019a-fwvga-video.dtsi"

#include "msm8916-camera-sensor-qrd-skui.dtsi"

&soc {

	gpio-leds {