Merge "ARM: dts: msm: Enable otg-disable-reset flag for msm8939"

	mode with device controller for better throughput. With this mode, USB Core

	runs using PNOC clock and synchronous to it. Hence it is must to have proper

	"qcom,msm-bus,vectors" to have high bus frequency. User shouldn't try to

	enable this feature without proper bus voting.

	enable this feature without proper bus voting. When this feature is enabled,

	it is required to do HW reset during cable disconnect for host mode functionality

	working and hence need to disable qcom,hsusb-otg-disable-reset.

- qcom,disable-retention-with-vdd-min: If present don't allow phy retention but allow

	vdd min.

- qcom,usbin-vadc: Corresponding vadc device's phandle to read usbin voltage using VADC.

		qcom,hsusb-otg-phy-type = <2>;

		qcom,hsusb-otg-mode = <1>;

		qcom,hsusb-otg-otg-control = <2>;

		qcom,hsusb-otg-disable-reset;

		qcom,dp-manual-pullup;

		qcom,msm-bus,name = "usb2";