Merge "ARM: dts: msm: Modify TSENS binding names"

TSENS node

TSENS node

Required properties:

Required properties:

- compatible : should be "qcom,msm-tsens" for MSM8974 TSENS driver.

- compatible : should be "qti,msm-tsens" for MSM8974 TSENS driver.

- reg : offset and length of the TSENS registers.

- reg : offset and length of the TSENS registers.

- reg : offset and length of the QFPROM registers used for storing

- reg : offset and length of the QFPROM registers used for storing

	the calibration data for the individual sensors.

	the calibration data for the individual sensors.

	      calibration address region if TSENS calibration data is stored

	      calibration address region if TSENS calibration data is stored

	      in the region.

	      in the region.

- interrupts : TSENS interrupt for cool/warm temperature threshold.

- interrupts : TSENS interrupt for cool/warm temperature threshold.

- qcom,sensors : Total number of available Temperature sensors for TSENS.

- qti,sensors : Total number of available Temperature sensors for TSENS.

- qcom,slope : One point calibration characterized slope data for each

- qti,slope : One point calibration characterized slope data for each

	       sensor used to compute the offset. Slope is represented

	       sensor used to compute the offset. Slope is represented

	       as ADC code/DegC and the value is multipled by a factor

	       as ADC code/DegC and the value is multipled by a factor

	       of 1000.

	       of 1000.

- qcom,calib-mode : Calibration masks to use to abstract the offset data from efuse.

- qti,calib-mode : Calibration masks to use to abstract the offset data from efuse.

		    Select from the following strings.

		    Select from the following strings.

		    "fuse_map1" : Used for 8974/9x25 fuse calibration map.

		    "fuse_map1" : Used for 8974/9x25 fuse calibration map.

		    "fuse_map2" : Used for 8x26 fuse calibration map.

		    "fuse_map2" : Used for 8x26 fuse calibration map.

		    "fuse_map3" : Used for 8x10 fuse calibration map.

		    "fuse_map3" : Used for 8x10 fuse calibration map.

Optional properties:

Optional properties:

- qcom,calibration-less-mode : If present the pre-characterized data for offsets

- qti,calibration-less-mode : If present the pre-characterized data for offsets

		are used else it defaults to use calibration data from QFPROM.

		are used else it defaults to use calibration data from QFPROM.

- qcom,tsens-local-init : If the flag is present the TSENS control registers are

- qti,tsens-local-init : If the flag is present the TSENS control registers are

		initialized. If the boot configures the control register there is

		initialized. If the boot configures the control register there is

		no need to re-initialize them. The control registers are also

		no need to re-initialize them. The control registers are also

		under a secure domain which can prevent them from being initialized

		under a secure domain which can prevent them from being initialized

		locally.

		locally.

- qcom,sensor-id : If the flag is present map the TSENS sensors based on the

- qti,sensor-id : If the flag is present map the TSENS sensors based on the

		remote sensors that are enabled in HW. Ensure the mapping is not

		remote sensors that are enabled in HW. Ensure the mapping is not

		more than the number of supported sensors.

		more than the number of supported sensors.

Example:

Example:

tsens@fc4a8000 {

tsens@fc4a8000 {

	compatible = "qcom,msm-tsens";

	compatible = "qti,msm-tsens";

	reg = <0xfc4a8000 0x2000>,

	reg = <0xfc4a8000 0x2000>,

	      <0xfc4b8000 0x1000>;

	      <0xfc4b8000 0x1000>;

	reg-names = "tsens_physical",

	reg-names = "tsens_physical",

		    "tsens_eeprom_physical";

		    "tsens_eeprom_physical";

	interrupts = <0 184 0>;

	interrupts = <0 184 0>;

	qcom,calibration-less-mode;

	qti,calibration-less-mode;

	qcom,sensors = <11>;

	qti,sensors = <11>;

	qcom,slope = <3200 3200 3200 3200 3200 3200 3200 3200 3200

	qti,slope = <3200 3200 3200 3200 3200 3200 3200 3200 3200

			3200>;

			3200>;

	qcom,calib-mode = "fuse_map1";

	qti,calib-mode = "fuse_map1";

};

};

};

};

&tsens {

&tsens {

	qcom,sensors = <4>;

	qti,sensors = <4>;

	qcom,slope = <2901 2846 3038 2955>;

	qti,slope = <2901 2846 3038 2955>;

};

};

};

};

&tsens {

&tsens {

	qcom,sensors = <6>;

	qti,sensors = <6>;

	qcom,slope = <2901 2846 3038 2955 2901 2846>;

	qti,slope = <2901 2846 3038 2955 2901 2846>;

};

};

	};

	};

	tsens: tsens@fc4a8000 {

	tsens: tsens@fc4a8000 {

		compatible = "qcom,msm-tsens";

		compatible = "qti,msm-tsens";

		reg = <0xfc4a8000 0x2000>,

		reg = <0xfc4a8000 0x2000>,

		      <0xfc4bc000 0x1000>;

		      <0xfc4bc000 0x1000>;

		reg-names = "tsens_physical", "tsens_eeprom_physical";

		reg-names = "tsens_physical", "tsens_eeprom_physical";

		interrupts = <0 184 0>;

		interrupts = <0 184 0>;

		qcom,sensors = <11>;

		qti,sensors = <11>;

		qcom,slope = <3200 3200 3200 3200 3200 3200 3200 3200 3200

		qti,slope = <3200 3200 3200 3200 3200 3200 3200 3200 3200

				3200 3200>;

				3200 3200>;

		qcom,calib-mode = "fuse_map1";

		qti,calib-mode = "fuse_map1";

	};

	};

	xhci_hsic_host: qcom,xhci-msm-hsic@0xf9c00000 {

	xhci_hsic_host: qcom,xhci-msm-hsic@0xf9c00000 {

	};

	};

	tsens: tsens@fc4a8000 {

	tsens: tsens@fc4a8000 {

		compatible = "qcom,msm-tsens";

		compatible = "qti,msm-tsens";

		reg = <0xfc4a8000 0x2000>,

		reg = <0xfc4a8000 0x2000>,

			<0xfc4bc000 0x1000>;

			<0xfc4bc000 0x1000>;

		reg-names = "tsens_physical", "tsens_eeprom_physical";

		reg-names = "tsens_physical", "tsens_eeprom_physical";

		interrupts = <0 184 0>;

		interrupts = <0 184 0>;

		qcom,sensors = <7>;

		qti,sensors = <7>;

		qcom,slope = <3200 3200 3200 3200 3200 3200 3200>;

		qti,slope = <3200 3200 3200 3200 3200 3200 3200>;

		qcom,calib-mode = "fuse_map4";

		qti,calib-mode = "fuse_map4";

	};

	};

	qcom,msm-thermal {

	qcom,msm-thermal {

		compatible = "qcom,msm-thermal";

		compatible = "qcom,msm-thermal";