Loading Documentation/devicetree/bindings/media/video/msm-cci.txt +1 −0 Original line number Diff line number Diff line Loading @@ -49,6 +49,7 @@ MSM sensor node contains properties of camera sensor Required properties: - compatible : should be manufacturer name followed by sensor name - "qcom,s5k3l1yx" - "sne,imx134" - "qcom,imx135" - "shinetech,gc0339" - "shinetech,hi256" Loading drivers/media/platform/msm/camera_v2/sensor/Makefile +1 −0 Original line number Diff line number Diff line Loading @@ -8,6 +8,7 @@ obj-$(CONFIG_MSM_CAMERA_SENSOR) += msm_sensor.o obj-$(CONFIG_S5K3L1YX) += s5k3l1yx.o obj-$(CONFIG_IMX135) += imx135.o obj-$(CONFIG_IMX132) += imx132.o obj-$(CONFIG_IMX134) += imx134.o obj-$(CONFIG_OV8825) += ov8825.o obj-$(CONFIG_s5k4e1) += s5k4e1.o obj-$(CONFIG_OV12830) += ov12830.o Loading drivers/media/platform/msm/camera_v2/sensor/imx134.c 0 → 100644 +174 −0 Original line number Diff line number Diff line /* Copyright (c) 2013, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * */ #include "msm_sensor.h" #define IMX134_SENSOR_NAME "imx134" DEFINE_MSM_MUTEX(imx134_mut); static struct msm_sensor_ctrl_t imx134_s_ctrl; static struct msm_sensor_power_setting imx134_power_setting[] = { { .seq_type = SENSOR_VREG, .seq_val = CAM_VDIG, .config_val = 0, .delay = 0, }, { .seq_type = SENSOR_VREG, .seq_val = CAM_VANA, .config_val = 0, .delay = 0, }, { .seq_type = SENSOR_VREG, .seq_val = CAM_VIO, .config_val = 0, .delay = 0, }, { .seq_type = SENSOR_VREG, .seq_val = CAM_VAF, .config_val = 0, .delay = 0, }, { .seq_type = SENSOR_GPIO, .seq_val = SENSOR_GPIO_RESET, .config_val = GPIO_OUT_LOW, .delay = 1, }, { .seq_type = SENSOR_GPIO, .seq_val = SENSOR_GPIO_RESET, .config_val = GPIO_OUT_HIGH, .delay = 30, }, { .seq_type = SENSOR_GPIO, .seq_val = SENSOR_GPIO_STANDBY, .config_val = GPIO_OUT_LOW, .delay = 1, }, { .seq_type = SENSOR_GPIO, .seq_val = SENSOR_GPIO_STANDBY, .config_val = GPIO_OUT_HIGH, .delay = 30, }, { .seq_type = SENSOR_CLK, .seq_val = SENSOR_CAM_MCLK, .config_val = 0, .delay = 1, }, { .seq_type = SENSOR_I2C_MUX, .seq_val = 0, .config_val = 0, .delay = 0, }, }; static struct v4l2_subdev_info imx134_subdev_info[] = { { .code = V4L2_MBUS_FMT_SBGGR10_1X10, .colorspace = V4L2_COLORSPACE_JPEG, .fmt = 1, .order = 0, }, }; static const struct i2c_device_id imx134_i2c_id[] = { {IMX134_SENSOR_NAME, (kernel_ulong_t)&imx134_s_ctrl}, { } }; static int32_t msm_imx134_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { return msm_sensor_i2c_probe(client, id, &imx134_s_ctrl); } static struct i2c_driver imx134_i2c_driver = { .id_table = imx134_i2c_id, .probe = msm_imx134_i2c_probe, .driver = { .name = IMX134_SENSOR_NAME, }, }; static struct msm_camera_i2c_client imx134_sensor_i2c_client = { .addr_type = MSM_CAMERA_I2C_WORD_ADDR, }; static const struct of_device_id imx134_dt_match[] = { {.compatible = "sne,imx134", .data = &imx134_s_ctrl}, {} }; MODULE_DEVICE_TABLE(of, imx134_dt_match); static struct platform_driver imx134_platform_driver = { .driver = { .name = "sne,imx134", .owner = THIS_MODULE, .of_match_table = imx134_dt_match, }, }; static int32_t imx134_platform_probe(struct platform_device *pdev) { int32_t rc = 0; const struct of_device_id *match; match = of_match_device(imx134_dt_match, &pdev->dev); rc = msm_sensor_platform_probe(pdev, match->data); return rc; } static int __init imx134_init_module(void) { int32_t rc = 0; pr_debug("%s:%d\n", __func__, __LINE__); rc = platform_driver_probe(&imx134_platform_driver, imx134_platform_probe); if (!rc) return rc; pr_debug("%s:%d rc %d\n", __func__, __LINE__, rc); return i2c_add_driver(&imx134_i2c_driver); } static void __exit imx134_exit_module(void) { pr_debug("%s:%d\n", __func__, __LINE__); if (imx134_s_ctrl.pdev) { msm_sensor_free_sensor_data(&imx134_s_ctrl); platform_driver_unregister(&imx134_platform_driver); } else { i2c_del_driver(&imx134_i2c_driver); } return; } static struct msm_sensor_ctrl_t imx134_s_ctrl = { .sensor_i2c_client = &imx134_sensor_i2c_client, .power_setting_array.power_setting = imx134_power_setting, .power_setting_array.size = ARRAY_SIZE(imx134_power_setting), .msm_sensor_mutex = &imx134_mut, .sensor_v4l2_subdev_info = imx134_subdev_info, .sensor_v4l2_subdev_info_size = ARRAY_SIZE(imx134_subdev_info), }; module_init(imx134_init_module); module_exit(imx134_exit_module); MODULE_DESCRIPTION("imx134"); MODULE_LICENSE("GPL v2"); Loading
Documentation/devicetree/bindings/media/video/msm-cci.txt +1 −0 Original line number Diff line number Diff line Loading @@ -49,6 +49,7 @@ MSM sensor node contains properties of camera sensor Required properties: - compatible : should be manufacturer name followed by sensor name - "qcom,s5k3l1yx" - "sne,imx134" - "qcom,imx135" - "shinetech,gc0339" - "shinetech,hi256" Loading
drivers/media/platform/msm/camera_v2/sensor/Makefile +1 −0 Original line number Diff line number Diff line Loading @@ -8,6 +8,7 @@ obj-$(CONFIG_MSM_CAMERA_SENSOR) += msm_sensor.o obj-$(CONFIG_S5K3L1YX) += s5k3l1yx.o obj-$(CONFIG_IMX135) += imx135.o obj-$(CONFIG_IMX132) += imx132.o obj-$(CONFIG_IMX134) += imx134.o obj-$(CONFIG_OV8825) += ov8825.o obj-$(CONFIG_s5k4e1) += s5k4e1.o obj-$(CONFIG_OV12830) += ov12830.o Loading
drivers/media/platform/msm/camera_v2/sensor/imx134.c 0 → 100644 +174 −0 Original line number Diff line number Diff line /* Copyright (c) 2013, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * */ #include "msm_sensor.h" #define IMX134_SENSOR_NAME "imx134" DEFINE_MSM_MUTEX(imx134_mut); static struct msm_sensor_ctrl_t imx134_s_ctrl; static struct msm_sensor_power_setting imx134_power_setting[] = { { .seq_type = SENSOR_VREG, .seq_val = CAM_VDIG, .config_val = 0, .delay = 0, }, { .seq_type = SENSOR_VREG, .seq_val = CAM_VANA, .config_val = 0, .delay = 0, }, { .seq_type = SENSOR_VREG, .seq_val = CAM_VIO, .config_val = 0, .delay = 0, }, { .seq_type = SENSOR_VREG, .seq_val = CAM_VAF, .config_val = 0, .delay = 0, }, { .seq_type = SENSOR_GPIO, .seq_val = SENSOR_GPIO_RESET, .config_val = GPIO_OUT_LOW, .delay = 1, }, { .seq_type = SENSOR_GPIO, .seq_val = SENSOR_GPIO_RESET, .config_val = GPIO_OUT_HIGH, .delay = 30, }, { .seq_type = SENSOR_GPIO, .seq_val = SENSOR_GPIO_STANDBY, .config_val = GPIO_OUT_LOW, .delay = 1, }, { .seq_type = SENSOR_GPIO, .seq_val = SENSOR_GPIO_STANDBY, .config_val = GPIO_OUT_HIGH, .delay = 30, }, { .seq_type = SENSOR_CLK, .seq_val = SENSOR_CAM_MCLK, .config_val = 0, .delay = 1, }, { .seq_type = SENSOR_I2C_MUX, .seq_val = 0, .config_val = 0, .delay = 0, }, }; static struct v4l2_subdev_info imx134_subdev_info[] = { { .code = V4L2_MBUS_FMT_SBGGR10_1X10, .colorspace = V4L2_COLORSPACE_JPEG, .fmt = 1, .order = 0, }, }; static const struct i2c_device_id imx134_i2c_id[] = { {IMX134_SENSOR_NAME, (kernel_ulong_t)&imx134_s_ctrl}, { } }; static int32_t msm_imx134_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { return msm_sensor_i2c_probe(client, id, &imx134_s_ctrl); } static struct i2c_driver imx134_i2c_driver = { .id_table = imx134_i2c_id, .probe = msm_imx134_i2c_probe, .driver = { .name = IMX134_SENSOR_NAME, }, }; static struct msm_camera_i2c_client imx134_sensor_i2c_client = { .addr_type = MSM_CAMERA_I2C_WORD_ADDR, }; static const struct of_device_id imx134_dt_match[] = { {.compatible = "sne,imx134", .data = &imx134_s_ctrl}, {} }; MODULE_DEVICE_TABLE(of, imx134_dt_match); static struct platform_driver imx134_platform_driver = { .driver = { .name = "sne,imx134", .owner = THIS_MODULE, .of_match_table = imx134_dt_match, }, }; static int32_t imx134_platform_probe(struct platform_device *pdev) { int32_t rc = 0; const struct of_device_id *match; match = of_match_device(imx134_dt_match, &pdev->dev); rc = msm_sensor_platform_probe(pdev, match->data); return rc; } static int __init imx134_init_module(void) { int32_t rc = 0; pr_debug("%s:%d\n", __func__, __LINE__); rc = platform_driver_probe(&imx134_platform_driver, imx134_platform_probe); if (!rc) return rc; pr_debug("%s:%d rc %d\n", __func__, __LINE__, rc); return i2c_add_driver(&imx134_i2c_driver); } static void __exit imx134_exit_module(void) { pr_debug("%s:%d\n", __func__, __LINE__); if (imx134_s_ctrl.pdev) { msm_sensor_free_sensor_data(&imx134_s_ctrl); platform_driver_unregister(&imx134_platform_driver); } else { i2c_del_driver(&imx134_i2c_driver); } return; } static struct msm_sensor_ctrl_t imx134_s_ctrl = { .sensor_i2c_client = &imx134_sensor_i2c_client, .power_setting_array.power_setting = imx134_power_setting, .power_setting_array.size = ARRAY_SIZE(imx134_power_setting), .msm_sensor_mutex = &imx134_mut, .sensor_v4l2_subdev_info = imx134_subdev_info, .sensor_v4l2_subdev_info_size = ARRAY_SIZE(imx134_subdev_info), }; module_init(imx134_init_module); module_exit(imx134_exit_module); MODULE_DESCRIPTION("imx134"); MODULE_LICENSE("GPL v2");
