Merge "ARM: dts: msm: Add USB 3.0 device entries to msm8994"

		qcom,not-wakeup; /* Needed until MPM is fully configured. */

	};

	usb3: ssusb@f9200000 {

		compatible = "qcom,dwc-usb3-msm";

		status = "disabled";

		reg = <0xf9200000 0xfc000>,

			 <0xfd4ab000 0x4>;

		#address-cells = <1>;

		#size-cells = <1>;

		ranges;

		interrupt-parent = <&usb3>;

		interrupts = <0 1>;

		#interrupt-cells = <1>;

		interrupt-map-mask = <0x0 0xffffffff>;

		interrupt-map = <0x0 0 &intc 0 133 0

				 0x0 1 &spmi_bus 0x0 0x0 0x9 0x0>;

		interrupt-names = "hs_phy_irq", "pmic_id_irq";

		USB3_GDSC-supply = <&gdsc_usb30>;

		qcom,dwc-usb3-msm-tx-fifo-size = <29696>;

		qcom,dwc-usb3-msm-qdss-tx-fifo-size = <8192>;

		qcom,otg-capability;

		qcom,usb-dbm = <&dbm_1p5>;

		qcom,msm-bus,name = "usb3";

		qcom,msm-bus,num-cases = <2>;

		qcom,msm-bus,num-paths = <1>;

		qcom,msm-bus,vectors-KBps =

				<61 512 0 0>,

				<61 512 240000 960000>;

		clocks = <&clock_gcc clk_gcc_usb30_master_clk>,

			 <&clock_gcc clk_gcc_sys_noc_usb3_axi_clk>,

			 <&clock_gcc clk_gcc_usb30_mock_utmi_clk>,

			 <&clock_gcc clk_gcc_usb30_sleep_clk>,

			 <&clock_gcc clk_gcc_usb2_hs_phy_sleep_clk>,

			 <&clock_rpm clk_ln_bb_clk>,

			 <&clock_rpm clk_cxo_dwc3_clk>;

		clock-names = "core_clk", "iface_clk", "utmi_clk", "sleep_clk",

				"phy_sleep_clk", "ref_clk", "xo";

		dwc3@f9200000 {

			compatible = "synopsys,dwc3";

			reg = <0xf9200000 0xfc000>;

			interrupt-parent = <&intc>;

			interrupts = <0 131 0>, <0 179 0>;

			interrupt-names = "irq", "otg_irq";

			tx-fifo-resize;

			usb-phy = <&hsphy0>, <&ssphy0>;

			core_reset_after_phy_init;

		};

	};

	hsphy0: hsphy@f92f8800 {

		compatible = "qcom,usb-hsphy";

		status = "disabled";

		reg = <0xf92f8800 0x3ff>;

		qcom,hsphy-init = <0x00D191A4>;

		vdd-supply = <&pm8994_s2_corner>;

		vdda18-supply = <&pm8994_l6>;

		vdda33-supply = <&pm8994_l24>;

		qcom,vdd-voltage-level = <1 5 7>;

		qcom,ext-vbus-id;

		qcom,vbus-valid-override;

	};

	ssphy0: ssphy@f9b38000 {

		compatible = "qcom,usb-ssphy-qmp";

		status = "disabled";

		reg = <0xf9b38000 0x16c>;

		vdd-supply = <&pm8994_s2_corner>;

		vdda18-supply = <&pm8994_l6>;

		qcom,vdd-voltage-level = <1 5 7>;

		qcom,vbus-valid-override;

		clocks = <&clock_gcc clk_gcc_usb3_phy_aux_clk>,

			 <&clock_gcc clk_gcc_usb3_phy_pipe_clk>,

			 <&clock_gcc clk_gcc_usb_phy_cfg_ahb2phy_clk>,

			 <&clock_gcc clk_gcc_usb3_phy_reset>;

		clock-names = "aux_clk", "pipe_clk", "cfg_ahb_clk", "phy_reset";

	};

	dbm_1p5: dbm@f92f8000 {

		compatible = "qcom,usb-dbm-1p5";

		reg = <0xf92f8000 0x1000>;

		qcom,reset-ep-after-lpm-resume;

	};

	qcom,usbbam@f9304000 {

		compatible = "qcom,usb-bam-msm";

		reg = <0xf9304000 0x9000>,

		      <0xf92f880c 0x4>;

		reg-names = "ssusb", "qscratch_ram1_reg";

		interrupts = <0 132 0>;

		interrupt-names = "ssusb";

		clocks = <&clock_gcc clk_gcc_usb30_master_clk>,

			 <&clock_gcc clk_gcc_sys_noc_usb3_axi_clk>;

		clock-names = "mem_clk", "mem_iface_clk";

		qcom,usb-bam-fifo-baseaddr = <0xf9200000>;

		qcom,usb-bam-num-pipes = <16>;

		qcom,ignore-core-reset-ack;

		qcom,disable-clk-gating;

		qcom,usb-bam-override-threshold = <0x4001>;

		qcom,usb-bam-max-mbps-highspeed = <400>;

		qcom,usb-bam-max-mbps-superspeed = <3600>;

		qcom,pipe0 {

			label = "ssusb-ipa-out-0";

			qcom,usb-bam-mem-type = <2>;

			qcom,bam-type = <0>;

			qcom,dir = <0>;

			qcom,pipe-num = <0>;

			qcom,peer-bam = <2>;

			qcom,src-bam-physical-address = <0xf9304000>;

			qcom,src-bam-pipe-index = <1>;

			qcom,data-fifo-size = <0x8000>;

			qcom,descriptor-fifo-size = <0x2000>;

			qcom,reset-bam-on-connect;

			qcom,pipe-connection-type = <1>;

		};

		qcom,pipe1 {

			label = "ssusb-ipa-in-0";

			qcom,usb-bam-mem-type = <2>;

			qcom,bam-type = <0>;

			qcom,dir = <1>;

			qcom,pipe-num = <0>;

			qcom,peer-bam = <2>;

			qcom,dst-bam-physical-address = <0xf9304000>;

			qcom,dst-bam-pipe-index = <0>;

			qcom,data-fifo-size = <0x8000>;

			qcom,descriptor-fifo-size = <0x2000>;

			qcom,reset-bam-on-connect;

		};

		qcom,pipe2 {

			label = "ssusb-qdss-in-0";

			qcom,usb-bam-mem-type = <1>;

			qcom,bam-type = <0>;

			qcom,dir = <1>;

			qcom,pipe-num = <0>;

			qcom,peer-bam = <1>;

			qcom,src-bam-physical-address = <0xfc37C000>;

			qcom,src-bam-pipe-index = <0>;

			qcom,dst-bam-physical-address = <0xf9304000>;

			qcom,dst-bam-pipe-index = <2>;

			qcom,data-fifo-offset = <0xf0000>;

			qcom,data-fifo-size = <0x1800>;

			qcom,descriptor-fifo-offset = <0xf4000>;

			qcom,descriptor-fifo-size = <0x1400>;

			qcom,reset-bam-on-connect;

		};

	};

	usb_otg: usb@f9a55000 {

		compatible = "qcom,hsusb-otg";

		status = "disabled";