Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 131ec07e authored by Rama Krishna Phani A's avatar Rama Krishna Phani A
Browse files

ARM: dts: msm: Add VADC nodes for pmtellurium and pmitellurium 



Add VADC and ADC_TM channel nodes for pmtellurium and
VADC channel node for pmitellurium.

Change-Id: I5d5f43e787be6c087357693ab2da7a3088d4c442
Signed-off-by: default avatarRama Krishna Phani A <rphani@codeaurora.org>
parent edd854c9

arch/arm/boot/dts/qcom/msm-pmitellurium.dtsi

0 → 100644
+132 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&spmi_bus {



	qcom,pmitellurium@2 {

		spmi-slave-container;

		reg = <0x2>;

		#address-cells = <1>;

		#size-cells = <1>;



		pmitellurium_vadc: vadc@3100 {

			compatible = "qcom,qpnp-vadc";

			reg = <0x3100 0x100>;

			#address-cells = <1>;

			#size-cells = <0>;

			interrupts = <0x2 0x31 0x0>;

			interrupt-names = "eoc-int-en-set";

			qcom,adc-bit-resolution = <15>;

			qcom,adc-vdd-reference = <1800>;

			qcom,vadc-poll-eoc;



			chan@0 {

				label = "usbin";

				reg = <0>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <4>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@1 {

				label = "dcin";

				reg = <1>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <4>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@3 {

				label = "vchg_sns";

				reg = <3>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <1>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@9 {

				label = "ref_625mv";

				reg = <9>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@a {

				label = "ref_1250v";

				reg = <0xa>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@c {

				label = "ref_buf_625mv";

				reg = <0xc>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@d {

				label = "chg_temp";

				reg = <0xd>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <3>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@43 {

				label = "usb_dp";

				reg = <0x43>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <1>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@44 {

				label = "usb_dm";

				reg = <0x44>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <1>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};

		};

	};

};

arch/arm/boot/dts/qcom/msm-pmtellurium.dtsi

0 → 100644
+192 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&spmi_bus {



	qcom,pmtellurium@0 {

		spmi-slave-container;

		reg = <0x0>;

		#address-cells = <1>;

		#size-cells = <1>;



		pmtellurium_mpps: mpps {

			compatible = "qcom,qpnp-pin";

			spmi-dev-container;

			gpio-controller;

			#gpio-cells = <2>;

			#address-cells = <1>;

			#size-cells = <1>;

			label = "pmtellurium-mpp";



			mpp@a100 {

				/* MPP2 - PA_THERM config */

				reg = <0xa100 0x100>;

				qcom,pin-num = <2>;

				qcom,mode = <4>; /* AIN input */

				qcom,invert = <1>; /* Enable MPP */

				qcom,ain-route = <1>; /* AMUX 6 */

				qcom,master-en = <1>;

				qcom,src-sel = <0>; /* Function constant */

			};

		};



		pmtellurium_vadc: vadc@3100 {

			compatible = "qcom,qpnp-vadc";

			reg = <0x3100 0x100>;

			#address-cells = <1>;

			#size-cells = <0>;

			interrupts = <0x0 0x31 0x0>;

			interrupt-names = "eoc-int-en-set";

			qcom,adc-bit-resolution = <15>;

			qcom,adc-vdd-reference = <1800>;

			qcom,vadc-poll-eoc;



			chan@5 {

				label = "vcoin";

				reg = <5>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <1>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@7 {

				label = "vph_pwr";

				reg = <7>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <1>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@8 {

				label = "die_temp";

				reg = <8>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <3>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@9 {

				label = "ref_625mv";

				reg = <9>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@a {

				label = "ref_1250v";

				reg = <0xa>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@c {

				label = "ref_buf_625mv";

				reg = <0xc>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@36 {

				label = "pa_therm0";

				reg = <0x36>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "ratiometric";

				qcom,scale-function = <2>;

				qcom,hw-settle-time = <2>;

				qcom,fast-avg-setup = <0>;

			};



			chan@11 {

				label = "pa_therm1";

				reg = <0x11>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "ratiometric";

				qcom,scale-function = <2>;

				qcom,hw-settle-time = <2>;

				qcom,fast-avg-setup = <0>;

			};



			chan@32 {

				label = "xo_therm";

				reg = <0x32>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "ratiometric";

				qcom,scale-function = <4>;

				qcom,hw-settle-time = <2>;

				qcom,fast-avg-setup = <0>;

			};



			chan@3c {

				label = "xo_therm_buf";

				reg = <0x3c>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "ratiometric";

				qcom,scale-function = <4>;

				qcom,hw-settle-time = <2>;

				qcom,fast-avg-setup = <0>;

			};

		};



		pmtellurium_adc_tm: vadc@3400 {

			compatible = "qcom,qpnp-adc-tm";

			reg = <0x3400 0x100>;

			#address-cells = <1>;

			#size-cells = <0>;

			interrupts =	<0x0 0x34 0x0>,

					<0x0 0x34 0x3>,

					<0x0 0x34 0x4>;

			interrupt-names =	"eoc-int-en-set",

						"high-thr-en-set",

						"low-thr-en-set";

			qcom,adc-bit-resolution = <15>;

			qcom,adc-vdd-reference = <1800>;

			qcom,adc_tm-vadc = <&pmtellurium_vadc>;



			chan@36 {

				label = "pa_therm0";

				reg = <0x36>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "ratiometric";

				qcom,scale-function = <2>;

				qcom,hw-settle-time = <2>;

				qcom,fast-avg-setup = <0>;

				qcom,btm-channel-number = <0x48>;

			};

		};

	};

};

arch/arm/boot/dts/qcom/msmtellurium.dtsi

+3 −1
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2014, The Linux Foundation. All rights reserved.

 * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and
@@ -694,3 +694,5 @@ 
};



#include "msmtellurium-regulator.dtsi"

#include "msm-pmtellurium.dtsi"

#include "msm-pmitellurium.dtsi"