Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 0e104539 authored by Wei Ding's avatar Wei Ding
Browse files

msm: msm8939: camera: add camera TY dtsi. 



Add TY devices camera dtsi and eeprom pinctrl.

Change-Id: I19c3454a561f44951765707c252c7e41a508b23b
Signed-off-by: default avatarWei Ding <weiding@codeaurora.org>
parent c0e41b1d

arch/arm/boot/dts/qcom/msm8939-camera-sensor-qrd.dtsi

0 → 100644
+292 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2014, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */





&tlmm_pinmux {

	SGM3780_pins {

		qcom,pins = <&gp 31>, <&gp 32>;

		qcom,num-grp-pins = <2>;

		qcom,pin-func = <0>;

		label = "SGM3780_pins";

		SGM3780_default: en_default {

			  drive-strength = <2>;

			  bias-pull-down;

		};

	};

};



&soc {

	flash_SGM3780:flashlight {

		compatible = "qcom,leds-gpio-flash";

		status = "okay";

		pinctrl-names = "flash_default";

		pinctrl-0 = <&SGM3780_default>;

		qcom,flash-en = <&msm_gpio 31 0>;

		qcom,flash-now = <&msm_gpio 32 0>;

		qcom,op-seq = "flash_en", "flash_now";

		qcom,torch-seq-val = <1 0>;

		qcom,flash-seq-val = <0 1>;

		linux,name = "flashlight";

		linux,default-trigger = "flashlight-trigger";

	};



	led_flash0: qcom,camera-led-flash {

		cell-index = <0>;

		compatible = "qcom,camera-led-flash";

		qcom,flash-type = <3>;

		qcom,flash-source = <&flash_SGM3780>;

		qcom,torch-source = <&flash_SGM3780>;

	};

};



&cci {

	actuator0: qcom,actuator@0 {

		cell-index = <0>;

		reg = <0x00>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

	};



	eeprom0: qcom,eeprom@0{

		cell-index = <0>;

		reg = <0x00>;

		qcom,eeprom-name = "sunny_q13v04b";

		compatible = "qcom,eeprom";

		qcom,slave-addr = <0x20>;

		qcom,cci-master = <0>;

		qcom,num-blocks = <7>;



		qcom,page0 = <1 0x0100 2 0x01 1 1>;

		qcom,poll0 = <0 0x0 2 0 1 1>;

		qcom,mem0 = <0 0x0 2 0 1 0>;

		qcom,page1 = <1 0x5002 2 0x3 1 1>;

		qcom,poll1 = <0 0x0 2 0 1 1>;

		qcom,mem1 = <0 0x0 2 0 1 0>;

		qcom,page2 = <1 0x3d84 2 0xc0 1 0>;

		qcom,poll2 = <0 0x0 2 0 1 1>;

		qcom,mem2 = <0 0x0 2 0 1 0>;

		qcom,page3 = <1 0x3d88 2 0x7220 2 0>;

		qcom,poll3 = <0 0x0 2 0 1 1>;

		qcom,mem3 = <0 0x0 2 0 1 0>;

		qcom,page4 = <1 0x3d8a 2 0x7369 2 0>;

		qcom,poll4 = <0 0x0 2 0 1 1>;

		qcom,mem4 = <0 0x0 2 0 1 0>;

		qcom,page5 = <1 0x3d81 2 0x01 1 15>;

		qcom,poll5 = <0 0x0 2 0 1 1>;

		qcom,mem5 = <229 0x7220 2 0 1 0>;

		qcom,page6 = <1 0x5002 2 0x1 1 1>;

		qcom,poll6 = <0 0x0 2 0 1 1>;

		qcom,mem6 = <0 0x0 2 0 1 0>;



		cam_vdig-supply = <&pm8916_l2>;

		cam_vana-supply = <&pm8916_l17>;

		cam_vio-supply = <&pm8916_l6>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-type = <0 1 0>;

		qcom,cam-vreg-min-voltage = <1200000 0 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2850000>;

		qcom,cam-vreg-op-mode = <200000 0 80000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_default &cam_sensor_rear_default>;

		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep>;

		gpios = <&msm_gpio 26 0>,

			<&msm_gpio 35 0>,

			<&msm_gpio 34 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

			"MCAM_RESET",

			"MCAM_STANDBY";



		qcom,cam-power-seq-type = "sensor_vreg",

			"sensor_vreg", "sensor_vreg",

			"sensor_clk",

			"sensor_gpio", "sensor_gpio";

		qcom,cam-power-seq-val = "cam_vio",

			"cam_vana", "cam_vdig",

			"sensor_cam_mclk",

			"sensor_gpio_reset",

			"sensor_gpio_standby";

		qcom,cam-power-seq-cfg-val = <1 1 1 24000000 1 1>;

		qcom,cam-power-seq-delay = <1 1 5 5 5 10>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk0_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};



	eeprom1: qcom,eeprom@1{

		cell-index = <1>;

		reg = <0x01>;

		qcom,eeprom-name = "sunny_q5v41b";

		compatible = "qcom,eeprom";

		qcom,slave-addr = <0x6d>;

		qcom,cci-master = <0>;



		qcom,num-blocks = <10>;

		qcom,page0 = <1 0x0100 2 0x01 1 1>;

		qcom,poll0 = <0 0x0 2 0 1 1>;

		qcom,mem0 = <0 0x0 2 0 1 0>;

		qcom,page1 = <1 0x5002 2 0xa8 1 1>;

		qcom,poll1 = <0 0x0 2 0 1 1>;

		qcom,mem1 = <0 0x0 2 0 1 0>;

		qcom,page2 = <1 0x3d84 2 0xc0 1 1>;

		qcom,poll2 = <0 0x0 2 0 1 1>;

		qcom,mem2 = <0 0x0 2 0 1 0>;

		qcom,page3 = <1 0x3d88 2 0x70 1 1>;

		qcom,poll3 = <0 0x0 2 0 1 1>;

		qcom,mem3 = <0 0x3d00 2 0 1 0>;

		qcom,page4 = <1 0x3d89 2 0x10 1 1>;

		qcom,poll4 = <0 0x0 2 0 1 1>;

		qcom,mem4 = <0 0x3d00 2 0 1 0>;

		qcom,page5 = <1 0x3d8a 2 0x70 1 1>;

		qcom,poll5 = <0 0x0 2 0 1 1>;

		qcom,mem5 = <0 0x3d00 2 0 1 0>;

		qcom,page6 = <1 0x3d8b 2 0x29 1 1>;

		qcom,poll6 = <0 0x0 2 0 1 1>;

		qcom,mem6 = <0 0x3d00 2 0 1 0>;

		qcom,page7 = <1 0x3d81 2 0x01 1 5>;

		qcom,poll7 = <0 0x0 2 0 1 1>;

		qcom,mem7 = <26 0x7010 2 0 1 1>;

		qcom,page8 = <1 0x5002 2 0xaa 1 1>;

		qcom,poll8 = <0 0x0 2 0 1 1>;

		qcom,mem8 = <0 0x0 2 0 1 0>;

		qcom,page9 = <1 0x0100 2 0x00 1 1>;

		qcom,poll9 = <0 0x0 2 0 1 1>;

		qcom,mem9 = <0 0x0 2 0 1 0>;



		cam_vdig-supply = <&pm8916_l2>;

		cam_vana-supply = <&pm8916_l17>;

		cam_vio-supply = <&pm8916_l6>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-type = <0 1 0>;

		qcom,cam-vreg-min-voltage = <1200000 0 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2850000>;

		qcom,cam-vreg-op-mode = <200000 0 80000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_default &cam_sensor_front_default>;

		pinctrl-1 = <&cam_sensor_mclk1_sleep &cam_sensor_front_sleep>;

		gpios = <&msm_gpio 27 0>,

			<&msm_gpio 28 0>,

			<&msm_gpio 33 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK",

			"SCAM_RESET",

			"SCAM_STANDBY";



		qcom,cam-power-seq-type = "sensor_vreg",

			"sensor_vreg", "sensor_vreg",

			"sensor_gpio", "sensor_gpio",

			"sensor_clk";

		qcom,cam-power-seq-val = "cam_vio",

			"cam_vana", "cam_vdig",

			"sensor_gpio_reset",

			"sensor_gpio_standby",

			"sensor_cam_mclk" ;

		qcom,cam-power-seq-cfg-val = <1 1 1 1 1 24000000>;

		qcom,cam-power-seq-delay = <10 10 10 10 10 5>;



		clocks = <&clock_gcc clk_mclk1_clk_src>,

			<&clock_gcc clk_gcc_camss_mclk1_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};





	qcom,camera@0 {

		cell-index = <0>;

		compatible = "qcom,camera";

		reg = <0x0>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <90>;

		qcom,eeprom-src = <&eeprom0>;

		qcom,actuator-src = <&actuator0>;

		qcom,led-flash-src = <&led_flash0>;

		cam_vdig-supply = <&pm8916_l2>;

		cam_vana-supply = <&pm8916_l17>;

		cam_vio-supply = <&pm8916_l6>;

		cam_vaf-supply = <&pm8916_l10>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

							"cam_vaf";

		qcom,cam-vreg-type = <0 1 0 0>;

		qcom,cam-vreg-min-voltage = <1200000 0 2850000 2800000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2850000 2800000>;

		qcom,cam-vreg-op-mode = <200000 0 80000 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_default &cam_sensor_rear_default>;

		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep>;

		gpios = <&msm_gpio 26 0>,

			<&msm_gpio 35 0>,

			<&msm_gpio 34 0>,

			<&msm_gpio 120 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-af-pwdm = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

			"MCAM_RESET",

			"MCAM_STANDBY",

			"MCAM_AF_PWDM";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk0_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};



	qcom,camera@1 {

		cell-index = <1>;

		compatible = "qcom,camera";

		reg = <0x1>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <90>;

		qcom,eeprom-src = <&eeprom1>;

		cam_vdig-supply = <&pm8916_l2>;

		cam_vana-supply = <&pm8916_l17>;

		cam_vio-supply = <&pm8916_l6>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-type = <0 1 0>;

		qcom,cam-vreg-min-voltage = <1200000 0 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2850000>;

		qcom,cam-vreg-op-mode = <200000 0 80000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_default &cam_sensor_front_default>;

		pinctrl-1 = <&cam_sensor_mclk1_sleep &cam_sensor_front_sleep>;

		gpios = <&msm_gpio 27 0>,

			<&msm_gpio 28 0>,

			<&msm_gpio 33 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

			"SCAM_RESET",

			"SCAM_STANDBY";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk1_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk1_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};

};

arch/arm/boot/dts/qcom/msm8939-pinctrl.dtsi

+34 −4
Original line number Diff line number Diff line
@@ -910,7 +910,14 @@ 
				drive-strength = <2>; /* 2 MA */

				bias-disable = <0>; /* No PULL */

			};

			/*suspended state */

                };



		cam_sensor_mclk0_sleep {

			/* MCLK */

			qcom,pins = <&gp 26>;

			qcom,num-grp-pins = <1>;

			label = "cam-sensor-mclk0-sleep";

			/*suspend state */

			cam_sensor_mclk0_sleep: sleep {

				drive-strength = <2>; /* 2 MA */

				bias-pull-down; /* PULL DOWN */
@@ -927,7 +934,14 @@ 
				drive-strength = <2>; /* 2 MA */

				bias-disable = <0>; /* No PULL */

			};

			/*suspended state */

                };



		cam_sensor_mclk1_sleep {

			/* MCLK */

			qcom,pins = <&gp 27>;

			qcom,num-grp-pins = <1>;

			label = "cam-sensor-mclk1-sleep";

			/*suspend state */

			cam_sensor_mclk1_sleep: sleep {

				drive-strength = <2>; /* 2 MA */

				bias-pull-down; /* PULL DOWN */
@@ -945,7 +959,15 @@ 
				drive-strength = <2>; /* 2 MA */

				bias-disable = <0>; /* No PULL */

			};

			/*suspended state */

		};



		cam_sensor_rear_sleep {

			/* RESET, STANDBY */

			qcom,pins =  <&gp 35>, <&gp 34>;

			qcom,num-grp-pins = <2>;

			qcom,pin-func = <0>;

			label = "cam-sensor-rear-sleep";

			/*suspend state */

			cam_sensor_rear_sleep: sleep {

				drive-strength = <2>; /* 2 MA */

				bias-pull-down; /* PULL DOWN */
@@ -963,7 +985,15 @@ 
				drive-strength = <2>; /* 2 MA */

				bias-disable = <0>; /* No PULL */

			};

			/*suspended state */

		};



		cam_sensor_front_sleep {

			/* RESET, STANDBY */

			qcom,pins = <&gp 28>, <&gp 33>;

			qcom,num-grp-pins = <2>;

			qcom,pin-func = <0>;

			label = "cam_sensor_front_sleep";

			/*suspend state */

			cam_sensor_front_sleep: sleep {

				drive-strength = <2>; /* 2 MA */

				bias-pull-down = <0>; /* PULL DOWN */

arch/arm/boot/dts/qcom/msm8939-qrd-skuk.dtsi

+1 −1
Original line number Diff line number Diff line
@@ -12,7 +12,7 @@ 


#include "msm8939-qrd.dtsi"

#include "dsi-panel-nt35596-1080p-skuk-video.dtsi"



#include "msm8939-camera-sensor-qrd.dtsi"

/ {

	model = "Qualcomm Technologies, Inc. MSM8939 QRD SKUK";

	compatible = "qcom,msm8939-qrd-skuk", "qcom,msm8939-qrd", "qcom,msm8939", "qcom,qrd";