Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block (d5bee775) · Commits · e / devices / android_kernel_samsung_universal8895

block/elevator.c

+15 −30

Original line number	Diff line number	Diff line
		@@ -139,34 +139,15 @@ static int elevator_attach(request_queue_t q, struct elevator_type e,

		static char chosen_elevator[16];

		static void elevator_setup_default(void)
		static int __init elevator_setup(char *str)
		{
		struct elevator_type *e;

		/*
		* If default has not been set, use the compiled-in selection.
		*/
		if (!chosen_elevator[0])
		strcpy(chosen_elevator, CONFIG_DEFAULT_IOSCHED);

		/*
		* Be backwards-compatible with previous kernels, so users
		* won't get the wrong elevator.
		*/
		if (!strcmp(chosen_elevator, "as"))
		if (!strcmp(str, "as"))
		strcpy(chosen_elevator, "anticipatory");

		/*
		* If the given scheduler is not available, fall back to the default
		*/
		if ((e = elevator_find(chosen_elevator)))
		elevator_put(e);
		else
		strcpy(chosen_elevator, CONFIG_DEFAULT_IOSCHED);
		}

		static int __init elevator_setup(char *str)
		{
		strncpy(chosen_elevator, str, sizeof(chosen_elevator) - 1);
		return 0;
		}
		@@ -184,14 +165,16 @@ int elevator_init(request_queue_t q, char name)
		q->end_sector = 0;
		q->boundary_rq = NULL;

		elevator_setup_default();
		if (name && !(e = elevator_get(name)))
		return -EINVAL;

		if (!name)
		name = chosen_elevator;
		if (!e && *chosen_elevator && !(e = elevator_get(chosen_elevator)))
		printk("I/O scheduler %s not found\n", chosen_elevator);

		e = elevator_get(name);
		if (!e)
		return -EINVAL;
		if (!e && !(e = elevator_get(CONFIG_DEFAULT_IOSCHED))) {
		printk("Default I/O scheduler not found, using no-op\n");
		e = elevator_get("noop");
		}

		eq = kmalloc(sizeof(struct elevator_queue), GFP_KERNEL);
		if (!eq) {
		@@ -669,7 +652,9 @@ int elv_register(struct elevator_type *e)
		spin_unlock_irq(&elv_list_lock);

		printk(KERN_INFO "io scheduler %s registered", e->elevator_name);
		if (!strcmp(e->elevator_name, chosen_elevator))
		if (!strcmp(e->elevator_name, chosen_elevator) \|\|
		(!*chosen_elevator &&
		!strcmp(e->elevator_name, CONFIG_DEFAULT_IOSCHED)))
		printk(" (default)");
		printk("\n");
		return 0;

block/ll_rw_blk.c

+5 −2

Original line number	Diff line number	Diff line
		@@ -304,6 +304,7 @@ static inline void rq_init(request_queue_t q, struct request rq)
		* blk_queue_ordered - does this queue support ordered writes
		* @q: the request queue
		* @ordered: one of QUEUE_ORDERED_*
		* @prepare_flush_fn: rq setup helper for cache flush ordered writes
		*
		* Description:
		* For journalled file systems, doing ordered writes on a commit
		@@ -332,6 +333,7 @@ int blk_queue_ordered(request_queue_t *q, unsigned ordered,
		return -EINVAL;
		}

		q->ordered = ordered;
		q->next_ordered = ordered;
		q->prepare_flush_fn = prepare_flush_fn;

		@@ -662,7 +664,7 @@ EXPORT_SYMBOL(blk_queue_bounce_limit);
		* Enables a low level driver to set an upper limit on the size of
		* received requests.
		**/
		void blk_queue_max_sectors(request_queue_t *q, unsigned short max_sectors)
		void blk_queue_max_sectors(request_queue_t *q, unsigned int max_sectors)
		{
		if ((max_sectors << 9) < PAGE_CACHE_SIZE) {
		max_sectors = 1 << (PAGE_CACHE_SHIFT - 9);
		@@ -2632,6 +2634,7 @@ EXPORT_SYMBOL(blk_put_request);
		/**
		* blk_end_sync_rq - executes a completion event on a request
		* @rq: request to complete
		* @error: end io status of the request
		*/
		void blk_end_sync_rq(struct request *rq, int error)
		{
		@@ -3153,7 +3156,7 @@ static int __end_that_request_first(struct request *req, int uptodate,
		if (blk_fs_request(req) && req->rq_disk) {
		const int rw = rq_data_dir(req);

		__disk_stat_add(req->rq_disk, sectors[rw], nr_bytes >> 9);
		disk_stat_add(req->rq_disk, sectors[rw], nr_bytes >> 9);
		}

		total_bytes = bio_nbytes = 0;

drivers/scsi/libata-scsi.c

+26 −1

Original line number	Diff line number	Diff line
		@@ -1700,6 +1700,31 @@ static unsigned int ata_msense_rw_recovery(u8 *ptr_io, const u8 last)
		return sizeof(def_rw_recovery_mpage);
		}

		/*
		* We can turn this into a real blacklist if it's needed, for now just
		* blacklist any Maxtor BANC1G10 revision firmware
		*/
		static int ata_dev_supports_fua(u16 *id)
		{
		unsigned char model[41], fw[9];

		if (!ata_id_has_fua(id))
		return 0;

		model[40] = '\0';
		fw[8] = '\0';

		ata_dev_id_string(id, model, ATA_ID_PROD_OFS, sizeof(model) - 1);
		ata_dev_id_string(id, fw, ATA_ID_FW_REV_OFS, sizeof(fw) - 1);

		if (strncmp(model, "Maxtor", 6))
		return 1;
		if (strncmp(fw, "BANC1G10", 8))
		return 1;

		return 0; /* blacklisted */
		}

		/**
		* ata_scsiop_mode_sense - Simulate MODE SENSE 6, 10 commands
		* @args: device IDENTIFY data / SCSI command of interest.
		@@ -1797,7 +1822,7 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args args, u8 rbuf,
		return 0;

		dpofua = 0;
		if (ata_id_has_fua(args->id) && dev->flags & ATA_DFLAG_LBA48 &&
		if (ata_dev_supports_fua(args->id) && dev->flags & ATA_DFLAG_LBA48 &&
		(!(dev->flags & ATA_DFLAG_PIO) \|\| dev->multi_count))
		dpofua = 1 << 4;

fs/bio.c

+1 −0

Original line number	Diff line number	Diff line
		@@ -411,6 +411,7 @@ static int __bio_add_page(request_queue_t q, struct bio bio, struct page

		/**
		* bio_add_pc_page - attempt to add page to bio
		* @q: the target queue
		* @bio: destination bio
		* @page: page to add
		* @len: vec entry length

include/linux/blkdev.h

+3 −3

Original line number	Diff line number	Diff line
		@@ -392,8 +392,8 @@ struct request_queue
		unsigned int nr_congestion_off;
		unsigned int nr_batching;

		unsigned short max_sectors;
		unsigned short max_hw_sectors;
		unsigned int max_sectors;
		unsigned int max_hw_sectors;
		unsigned short max_phys_segments;
		unsigned short max_hw_segments;
		unsigned short hardsect_size;
		@@ -697,7 +697,7 @@ extern request_queue_t blk_init_queue(request_fn_proc , spinlock_t *);
		extern void blk_cleanup_queue(request_queue_t *);
		extern void blk_queue_make_request(request_queue_t , make_request_fn );
		extern void blk_queue_bounce_limit(request_queue_t *, u64);
		extern void blk_queue_max_sectors(request_queue_t *, unsigned short);
		extern void blk_queue_max_sectors(request_queue_t *, unsigned int);
		extern void blk_queue_max_phys_segments(request_queue_t *, unsigned short);
		extern void blk_queue_max_hw_segments(request_queue_t *, unsigned short);
		extern void blk_queue_max_segment_size(request_queue_t *, unsigned int);