Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 78eb9094 authored by Shengzhou Liu's avatar Shengzhou Liu Committed by Scott Wood
Browse files

powerpc/t2080rdb: Add T2080RDB board support 



T2080PCIe-RDB is a Freescale Reference Design Board that hosts T2080 SoC.
The board feature overview:
Processor:
 - T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz
DDR Memory:
 - Single memory controller capable of supporting DDR3 and DDR3-LP devices
 - 72bit 4GB DDR3-LP SODIMM in slot
Ethernet interfaces:
 - Two 1Gbps RGMII ports on-board
 - Two 10Gbps SFP+ ports on-board
 - Two 10Gbps Base-T ports on-board
Accelerator:
 - DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC
IFC/Local Bus
 - NOR:  128MB 16-bit NOR flash
 - NAND: 1GB 8-bit NAND flash
 - CPLD: for system controlling with programable header on-board
eSPI:
 - 64MB N25Q512 SPI flash
USB:
 - Two USB2.0 ports with internal PHY (both Type-A)
PCIe:
 - One PCIe x4 goldfinger(support SR-IOV)
 - One PCIe x4 slot
 - One PCIe x2 end-point device (C293 crypto co-processor)
SATA:
 - Two SATA 2.0 ports on-board
SDHC:
 - support a MicroSD/TF card on-board
I2C:
 - Four I2C controllers.
UART:
 - Dual 4-pins UART serial ports

Signed-off-by: default avatarShengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: default avatarScott Wood <scottwood@freescale.com>
parent dd2b04fc

arch/powerpc/boot/dts/t2080rdb.dts

0 → 100644
+57 −0
Original line number Original line Diff line number Diff line 
/*

 * T2080PCIe-RDB Board Device Tree Source

 *

 * Copyright 2014 Freescale Semiconductor Inc.

 *

 * Redistribution and use in source and binary forms, with or without

 * modification, are permitted provided that the following conditions are met:

 *     * Redistributions of source code must retain the above copyright

 *	 notice, this list of conditions and the following disclaimer.

 *     * Redistributions in binary form must reproduce the above copyright

 *	 notice, this list of conditions and the following disclaimer in the

 *	 documentation and/or other materials provided with the distribution.

 *     * Neither the name of Freescale Semiconductor nor the

 *	 names of its contributors may be used to endorse or promote products

 *	 derived from this software without specific prior written permission.

 *

 *

 * ALTERNATIVELY, this software may be distributed under the terms of the

 * GNU General Public License ("GPL") as published by the Free Software

 * Foundation, either version 2 of that License or (at your option) any

 * later version.

 *

 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY

 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY

 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 */



/include/ "fsl/t208xsi-pre.dtsi"

/include/ "t208xrdb.dtsi"



/ {

	model = "fsl,T2080RDB";

	compatible = "fsl,T2080RDB";

	#address-cells = <2>;

	#size-cells = <2>;

	interrupt-parent = <&mpic>;



	rio: rapidio@ffe0c0000 {

		reg = <0xf 0xfe0c0000 0 0x11000>;



		port1 {

			ranges = <0 0 0xc 0x20000000 0 0x10000000>;

		};

		port2 {

			ranges = <0 0 0xc 0x30000000 0 0x10000000>;

		};

	};

};



/include/ "fsl/t2080si-post.dtsi"

arch/powerpc/boot/dts/t208xrdb.dtsi

0 → 100644
+184 −0
Original line number Original line Diff line number Diff line 
/*

 * T2080PCIe-RDB Board Device Tree Source

 *

 * Copyright 2014 Freescale Semiconductor Inc.

 *

 * Redistribution and use in source and binary forms, with or without

 * modification, are permitted provided that the following conditions are met:

 *     * Redistributions of source code must retain the above copyright

 *	 notice, this list of conditions and the following disclaimer.

 *     * Redistributions in binary form must reproduce the above copyright

 *	 notice, this list of conditions and the following disclaimer in the

 *	 documentation and/or other materials provided with the distribution.

 *     * Neither the name of Freescale Semiconductor nor the

 *	 names of its contributors may be used to endorse or promote products

 *	 derived from this software without specific prior written permission.

 *

 *

 * ALTERNATIVELY, this software may be distributed under the terms of the

 * GNU General Public License ("GPL") as published by the Free Software

 * Foundation, either version 2 of that License or (at your option) any

 * later version.

 *

 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY

 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY

 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 */



/ {

	model = "fsl,T2080RDB";

	compatible = "fsl,T2080RDB";

	#address-cells = <2>;

	#size-cells = <2>;

	interrupt-parent = <&mpic>;



	ifc: localbus@ffe124000 {

		reg = <0xf 0xfe124000 0 0x2000>;

		ranges = <0 0 0xf 0xe8000000 0x08000000

			  2 0 0xf 0xff800000 0x00010000

			  3 0 0xf 0xffdf0000 0x00008000>;



		nor@0,0 {

			#address-cells = <1>;

			#size-cells = <1>;

			compatible = "cfi-flash";

			reg = <0x0 0x0 0x8000000>;



			bank-width = <2>;

			device-width = <1>;

		};



		nand@1,0 {

			#address-cells = <1>;

			#size-cells = <1>;

			compatible = "fsl,ifc-nand";

			reg = <0x2 0x0 0x10000>;

		};



		boardctrl: board-control@2,0 {

			#address-cells = <1>;

			#size-cells = <1>;

			compatible = "fsl,t2080-cpld";

			reg = <3 0 0x300>;

			ranges = <0 3 0 0x300>;

		};

	};



	memory {

		device_type = "memory";

	};



	dcsr: dcsr@f00000000 {

		ranges = <0x00000000 0xf 0x00000000 0x01072000>;

	};



	soc: soc@ffe000000 {

		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;

		reg = <0xf 0xfe000000 0 0x00001000>;

		spi@110000 {

			flash@0 {

				#address-cells = <1>;

				#size-cells = <1>;

				compatible = "micron,n25q512a";

				reg = <0>;

				spi-max-frequency = <10000000>; /* input clock */

			};

		};



		i2c@118000 {

			adt7481@4c {

				compatible = "adi,adt7481";

				reg = <0x4c>;

			};



			rtc@68 {

				compatible = "dallas,ds1339";

				reg = <0x68>;

				interrupts = <0x1 0x1 0 0>;

			};



			eeprom@50 {

				compatible = "atmel,24c256";

				reg = <0x50>;

			};

		};



		i2c@118100 {

			pca9546@77 {

				compatible = "nxp,pca9546";

				reg = <0x77>;

			};

		};



		sdhc@114000 {

			voltage-ranges = <1800 1800 3300 3300>;

		};

	};



	pci0: pcie@ffe240000 {

		reg = <0xf 0xfe240000 0 0x10000>;

		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000

			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;

		pcie@0 {

			ranges = <0x02000000 0 0xe0000000

				  0x02000000 0 0xe0000000

				  0 0x20000000



				  0x01000000 0 0x00000000

				  0x01000000 0 0x00000000

				  0 0x00010000>;

		};

	};



	pci1: pcie@ffe250000 {

		reg = <0xf 0xfe250000 0 0x10000>;

		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000

			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;

		pcie@0 {

			ranges = <0x02000000 0 0xe0000000

				  0x02000000 0 0xe0000000

				  0 0x20000000



				  0x01000000 0 0x00000000

				  0x01000000 0 0x00000000

				  0 0x00010000>;

		};

	};



	pci2: pcie@ffe260000 {

		reg = <0xf 0xfe260000 0 0x1000>;

		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000

			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;

		pcie@0 {

			ranges = <0x02000000 0 0xe0000000

				  0x02000000 0 0xe0000000

				  0 0x20000000



				  0x01000000 0 0x00000000

				  0x01000000 0 0x00000000

				  0 0x00010000>;

		};

	};



	pci3: pcie@ffe270000 {

		reg = <0xf 0xfe270000 0 0x10000>;

		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000

			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;

		pcie@0 {

			ranges = <0x02000000 0 0xe0000000

				  0x02000000 0 0xe0000000

				  0 0x20000000



				  0x01000000 0 0x00000000

				  0x01000000 0 0x00000000

				  0 0x00010000>;

		};

	};

};

arch/powerpc/platforms/85xx/Kconfig

+1 −1
Original line number Original line Diff line number Diff line
@@ -274,7 +274,7 @@ config CORENET_GENERIC 
	  For 32bit kernel, the following boards are supported:

	  For 32bit kernel, the following boards are supported:

	    P2041 RDB, P3041 DS, P4080 DS, kmcoge4, and OCA4080

	    P2041 RDB, P3041 DS, P4080 DS, kmcoge4, and OCA4080

	  For 64bit kernel, the following boards are supported:

	  For 64bit kernel, the following boards are supported:

	    T208x QDS, T4240 QDS/RDB and B4 QDS

	    T208x QDS/RDB, T4240 QDS/RDB and B4 QDS

	  The following boards are supported for both 32bit and 64bit kernel:

	  The following boards are supported for both 32bit and 64bit kernel:

	    P5020 DS, P5040 DS and T104xQDS

	    P5020 DS, P5040 DS and T104xQDS

arch/powerpc/platforms/85xx/corenet_generic.c

+1 −0
Original line number Original line Diff line number Diff line
@@ -120,6 +120,7 @@ static const char * const boards[] __initconst = { 
	"fsl,P5020DS",

	"fsl,P5020DS",

	"fsl,P5040DS",

	"fsl,P5040DS",

	"fsl,T2080QDS",

	"fsl,T2080QDS",

	"fsl,T2080RDB",

	"fsl,T2081QDS",

	"fsl,T2081QDS",

	"fsl,T4240QDS",

	"fsl,T4240QDS",

	"fsl,T4240RDB",

	"fsl,T4240RDB",