diff --git a/Documentation/ABI/stable/sysfs-driver-usb-usbtmc b/Documentation/ABI/stable/sysfs-driver-usb-usbtmc index 2a7f9a00cb0a6a0acef8fc46bbb6f290f4d0dc67..e960cd027e1e9685a83f3275ca859da7a793e116 100644 --- a/Documentation/ABI/stable/sysfs-driver-usb-usbtmc +++ b/Documentation/ABI/stable/sysfs-driver-usb-usbtmc @@ -1,5 +1,5 @@ -What: /sys/bus/usb/drivers/usbtmc/devices/*/interface_capabilities -What: /sys/bus/usb/drivers/usbtmc/devices/*/device_capabilities +What: /sys/bus/usb/drivers/usbtmc/*/interface_capabilities +What: /sys/bus/usb/drivers/usbtmc/*/device_capabilities Date: August 2008 Contact: Greg Kroah-Hartman Description: @@ -12,8 +12,8 @@ Description: The files are read only. -What: /sys/bus/usb/drivers/usbtmc/devices/*/usb488_interface_capabilities -What: /sys/bus/usb/drivers/usbtmc/devices/*/usb488_device_capabilities +What: /sys/bus/usb/drivers/usbtmc/*/usb488_interface_capabilities +What: /sys/bus/usb/drivers/usbtmc/*/usb488_device_capabilities Date: August 2008 Contact: Greg Kroah-Hartman Description: @@ -27,7 +27,7 @@ Description: The files are read only. -What: /sys/bus/usb/drivers/usbtmc/devices/*/TermChar +What: /sys/bus/usb/drivers/usbtmc/*/TermChar Date: August 2008 Contact: Greg Kroah-Hartman Description: @@ -40,7 +40,7 @@ Description: sent to the device or not. -What: /sys/bus/usb/drivers/usbtmc/devices/*/TermCharEnabled +What: /sys/bus/usb/drivers/usbtmc/*/TermCharEnabled Date: August 2008 Contact: Greg Kroah-Hartman Description: @@ -51,7 +51,7 @@ Description: published by the USB-IF. -What: /sys/bus/usb/drivers/usbtmc/devices/*/auto_abort +What: /sys/bus/usb/drivers/usbtmc/*/auto_abort Date: August 2008 Contact: Greg Kroah-Hartman Description: diff --git a/Documentation/ABI/testing/sysfs-block-rssd b/Documentation/ABI/testing/sysfs-block-rssd new file mode 100644 index 0000000000000000000000000000000000000000..d535757799feda3d447c2ddbbed201794cea9279 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-block-rssd @@ -0,0 +1,18 @@ +What: /sys/block/rssd*/registers +Date: March 2012 +KernelVersion: 3.3 +Contact: Asai Thambi S P +Description: This is a read-only file. Dumps below driver information and + hardware registers. + - S ACTive + - Command Issue + - Allocated + - Completed + - PORT IRQ STAT + - HOST IRQ STAT + +What: /sys/block/rssd*/status +Date: April 2012 +KernelVersion: 3.4 +Contact: Asai Thambi S P +Description: This is a read-only file. Indicates the status of the device. diff --git a/Documentation/ABI/testing/sysfs-bus-hsi b/Documentation/ABI/testing/sysfs-bus-hsi new file mode 100644 index 0000000000000000000000000000000000000000..1b1b282a99e10a7e3febf54ac2ac7a792a338a1d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-hsi @@ -0,0 +1,19 @@ +What: /sys/bus/hsi +Date: April 2012 +KernelVersion: 3.4 +Contact: Carlos Chinea +Description: + High Speed Synchronous Serial Interface (HSI) is a + serial interface mainly used for connecting application + engines (APE) with cellular modem engines (CMT) in cellular + handsets. + The bus will be populated with devices (hsi_clients) representing + the protocols available in the system. Bus drivers implement + those protocols. + +What: /sys/bus/hsi/devices/.../modalias +Date: April 2012 +KernelVersion: 3.4 +Contact: Carlos Chinea +Description: Stores the same MODALIAS value emitted by uevent + Format: hsi: diff --git a/Documentation/ABI/testing/sysfs-cfq-target-latency b/Documentation/ABI/testing/sysfs-cfq-target-latency new file mode 100644 index 0000000000000000000000000000000000000000..df0f7828c5e30a5f6e78396bb01f7b256f9ebd60 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-cfq-target-latency @@ -0,0 +1,8 @@ +What: /sys/block//iosched/target_latency +Date: March 2012 +contact: Tao Ma +Description: + The /sys/block//iosched/target_latency only exists + when the user sets cfq to /sys/block//scheduler. + It contains an estimated latency time for the cfq. cfq will + use it to calculate the time slice used for every task. diff --git a/Documentation/DMA-attributes.txt b/Documentation/DMA-attributes.txt index b768cc0e402b8e6f1cfa8ae0b0f23c4e1c50168a..5c72eed89563083250217336c79ab1d7f350a7c5 100644 --- a/Documentation/DMA-attributes.txt +++ b/Documentation/DMA-attributes.txt @@ -31,3 +31,21 @@ may be weakly ordered, that is that reads and writes may pass each other. Since it is optional for platforms to implement DMA_ATTR_WEAK_ORDERING, those that do not will simply ignore the attribute and exhibit default behavior. + +DMA_ATTR_WRITE_COMBINE +---------------------- + +DMA_ATTR_WRITE_COMBINE specifies that writes to the mapping may be +buffered to improve performance. + +Since it is optional for platforms to implement DMA_ATTR_WRITE_COMBINE, +those that do not will simply ignore the attribute and exhibit default +behavior. + +DMA_ATTR_NON_CONSISTENT +----------------------- + +DMA_ATTR_NON_CONSISTENT lets the platform to choose to return either +consistent or non-consistent memory as it sees fit. By using this API, +you are guaranteeing to the platform that you have all the correct and +necessary sync points for this memory in the driver. diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index 9c27e5125dd26efb5ca49c4b2bc9beadb4d559d7..7514dbf0a6796c4e216a175fa79db0ed3ff470d9 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -446,4 +446,21 @@ X!Idrivers/video/console/fonts.c !Edrivers/i2c/i2c-core.c + + High Speed Synchronous Serial Interface (HSI) + + + High Speed Synchronous Serial Interface (HSI) is a + serial interface mainly used for connecting application + engines (APE) with cellular modem engines (CMT) in cellular + handsets. + + HSI provides multiplexing for up to 16 logical channels, + low-latency and full duplex communication. + + +!Iinclude/linux/hsi/hsi.h +!Edrivers/hsi/hsi.c + + diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml b/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml index 3fd3ce5df270563a7e9e1bfc26fa968498e9b1f4..5274c24d11e0a94ce55a05d166580f5cda50196f 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml @@ -1,6 +1,6 @@ - V4L2_PIX_FMT_NV12M ('NV12M') + V4L2_PIX_FMT_NV12M ('NM12') &manvol; diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml index 9957863daf18d4a4627a74b52fbfe3bd1141b87e..60308f1eefdfea59a33d83f30d32747c8f5c1aa4 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml @@ -1,6 +1,6 @@ - V4L2_PIX_FMT_YUV420M ('YU12M') + V4L2_PIX_FMT_YUV420M ('YM12') &manvol; diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt index 5c51ed406d1d1c8c87d5f66e02b676f8ddb2f65a..cefd3d8bbd11db69f51ffee25094e138fc5d0cbd 100644 --- a/Documentation/cgroups/cpusets.txt +++ b/Documentation/cgroups/cpusets.txt @@ -217,7 +217,7 @@ and name space for cpusets, with a minimum of additional kernel code. The cpus and mems files in the root (top_cpuset) cpuset are read-only. The cpus file automatically tracks the value of -cpu_online_map using a CPU hotplug notifier, and the mems file +cpu_online_mask using a CPU hotplug notifier, and the mems file automatically tracks the value of node_states[N_HIGH_MEMORY]--i.e., nodes with memory--using the cpuset_track_online_nodes() hook. diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index 4c95c0034a4bbbffdae12a99ff2ddbd0798ca09c..9b1067afb2245f702d962ca4a93c241af6641a02 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -34,8 +34,7 @@ Current Status: linux-2.6.34-mmotm(development version of 2010/April) Features: - accounting anonymous pages, file caches, swap caches usage and limiting them. - - private LRU and reclaim routine. (system's global LRU and private LRU - work independently from each other) + - pages are linked to per-memcg LRU exclusively, and there is no global LRU. - optionally, memory+swap usage can be accounted and limited. - hierarchical accounting - soft limit @@ -154,7 +153,7 @@ updated. page_cgroup has its own LRU on cgroup. 2.2.1 Accounting details All mapped anon pages (RSS) and cache pages (Page Cache) are accounted. -Some pages which are never reclaimable and will not be on the global LRU +Some pages which are never reclaimable and will not be on the LRU are not accounted. We just account pages under usual VM management. RSS pages are accounted at page_fault unless they've already been accounted diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt index a20bfd415e41cca69297760cee32de91c8d2812c..66ef8f35613d2190b4e2f5e42084a4736ff3dc69 100644 --- a/Documentation/cpu-hotplug.txt +++ b/Documentation/cpu-hotplug.txt @@ -47,7 +47,7 @@ maxcpus=n Restrict boot time cpus to n. Say if you have 4 cpus, using other cpus later online, read FAQ's for more info. additional_cpus=n (*) Use this to limit hotpluggable cpus. This option sets - cpu_possible_map = cpu_present_map + additional_cpus + cpu_possible_mask = cpu_present_mask + additional_cpus cede_offline={"off","on"} Use this option to disable/enable putting offlined processors to an extended H_CEDE state on @@ -64,11 +64,11 @@ should only rely on this to count the # of cpus, but *MUST* not rely on the apicid values in those tables for disabled apics. In the event BIOS doesn't mark such hot-pluggable cpus as disabled entries, one could use this parameter "additional_cpus=x" to represent those cpus in the -cpu_possible_map. +cpu_possible_mask. possible_cpus=n [s390,x86_64] use this to set hotpluggable cpus. This option sets possible_cpus bits in - cpu_possible_map. Thus keeping the numbers of bits set + cpu_possible_mask. Thus keeping the numbers of bits set constant even if the machine gets rebooted. CPU maps and such @@ -76,7 +76,7 @@ CPU maps and such [More on cpumaps and primitive to manipulate, please check include/linux/cpumask.h that has more descriptive text.] -cpu_possible_map: Bitmap of possible CPUs that can ever be available in the +cpu_possible_mask: Bitmap of possible CPUs that can ever be available in the system. This is used to allocate some boot time memory for per_cpu variables that aren't designed to grow/shrink as CPUs are made available or removed. Once set during boot time discovery phase, the map is static, i.e no bits @@ -84,13 +84,13 @@ are added or removed anytime. Trimming it accurately for your system needs upfront can save some boot time memory. See below for how we use heuristics in x86_64 case to keep this under check. -cpu_online_map: Bitmap of all CPUs currently online. Its set in __cpu_up() +cpu_online_mask: Bitmap of all CPUs currently online. Its set in __cpu_up() after a cpu is available for kernel scheduling and ready to receive interrupts from devices. Its cleared when a cpu is brought down using __cpu_disable(), before which all OS services including interrupts are migrated to another target CPU. -cpu_present_map: Bitmap of CPUs currently present in the system. Not all +cpu_present_mask: Bitmap of CPUs currently present in the system. Not all of them may be online. When physical hotplug is processed by the relevant subsystem (e.g ACPI) can change and new bit either be added or removed from the map depending on the event is hot-add/hot-remove. There are currently @@ -99,22 +99,22 @@ at which time hotplug is disabled. You really dont need to manipulate any of the system cpu maps. They should be read-only for most use. When setting up per-cpu resources almost always use -cpu_possible_map/for_each_possible_cpu() to iterate. +cpu_possible_mask/for_each_possible_cpu() to iterate. Never use anything other than cpumask_t to represent bitmap of CPUs. #include - for_each_possible_cpu - Iterate over cpu_possible_map - for_each_online_cpu - Iterate over cpu_online_map - for_each_present_cpu - Iterate over cpu_present_map + for_each_possible_cpu - Iterate over cpu_possible_mask + for_each_online_cpu - Iterate over cpu_online_mask + for_each_present_cpu - Iterate over cpu_present_mask for_each_cpu_mask(x,mask) - Iterate over some random collection of cpu mask. #include get_online_cpus() and put_online_cpus(): The above calls are used to inhibit cpu hotplug operations. While the -cpu_hotplug.refcount is non zero, the cpu_online_map will not change. +cpu_hotplug.refcount is non zero, the cpu_online_mask will not change. If you merely need to avoid cpus going away, you could also use preempt_disable() and preempt_enable() for those sections. Just remember the critical section cannot call any diff --git a/Documentation/devicetree/bindings/ata/calxeda-sata.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt similarity index 90% rename from Documentation/devicetree/bindings/ata/calxeda-sata.txt rename to Documentation/devicetree/bindings/ata/ahci-platform.txt index 79caa5651f53ed5a2f3d15d1ca1a55d5b5843926..8bb8a76d42e8c1b9cad1de552d8639045a204992 100644 --- a/Documentation/devicetree/bindings/ata/calxeda-sata.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -1,10 +1,10 @@ -* Calxeda SATA Controller +* AHCI SATA Controller SATA nodes are defined to describe on-chip Serial ATA controllers. Each SATA controller should have its own node. Required properties: -- compatible : compatible list, contains "calxeda,hb-ahci" +- compatible : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci" - interrupts : - reg : @@ -14,4 +14,3 @@ Example: reg = <0xffe08000 0x1000>; interrupts = <115>; }; - diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt index 5903ecf6e8952398d61710cb578b5fbc71c53675..a20069502f5aaeeb85c45978bcf13c67f598e962 100644 --- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt +++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt @@ -27,13 +27,13 @@ nand0: nand@40000000,0 { reg = <0x40000000 0x10000000 0xffffe800 0x200 >; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; + atmel,nand-addr-offset = <21>; /* ale */ + atmel,nand-cmd-offset = <22>; /* cle */ nand-on-flash-bbt; nand-ecc-mode = "soft"; - gpios = <&pioC 13 0 - &pioC 14 0 - 0 + gpios = <&pioC 13 0 /* rdy */ + &pioC 14 0 /* nce */ + 0 /* cd */ >; partition@0 { ... diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt new file mode 100644 index 0000000000000000000000000000000000000000..357758cb6e92f6078da84aa8bd516f8a87af21bc --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt @@ -0,0 +1,29 @@ +Anatop Voltage regulators + +Required properties: +- compatible: Must be "fsl,anatop-regulator" +- anatop-reg-offset: Anatop MFD register offset +- anatop-vol-bit-shift: Bit shift for the register +- anatop-vol-bit-width: Number of bits used in the register +- anatop-min-bit-val: Minimum value of this register +- anatop-min-voltage: Minimum voltage of this regulator +- anatop-max-voltage: Maximum voltage of this regulator + +Any property defined as part of the core regulator +binding, defined in regulator.txt, can also be used. + +Example: + + regulator-vddpu { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <9>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1300000>; + }; diff --git a/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt new file mode 100644 index 0000000000000000000000000000000000000000..e4acdd891e49f9bee64cd18394d64326ac54236c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt @@ -0,0 +1,49 @@ +Freescale i.MX audio complex with SGTL5000 codec + +Required properties: +- compatible : "fsl,imx-audio-sgtl5000" +- model : The user-visible name of this sound complex +- ssi-controller : The phandle of the i.MX SSI controller +- audio-codec : The phandle of the SGTL5000 audio codec +- audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names could be power + supplies, SGTL5000 pins, and the jacks on the board: + + Power supplies: + * Mic Bias + + SGTL5000 pins: + * MIC_IN + * LINE_IN + * HP_OUT + * LINE_OUT + + Board connectors: + * Mic Jack + * Line In Jack + * Headphone Jack + * Line Out Jack + * Ext Spk + +- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX) +- mux-ext-port : The external port of the i.MX audio muxer + +Note: The AUDMUX port numbering should start at 1, which is consistent with +hardware manual. + +Example: + +sound { + compatible = "fsl,imx51-babbage-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx51-babbage-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; +}; diff --git a/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt new file mode 100644 index 0000000000000000000000000000000000000000..601c518eddaa8266d8ab7ade1eb5b5f2ec7e5cc8 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt @@ -0,0 +1,17 @@ +* Freescale MXS audio complex with SGTL5000 codec + +Required properties: +- compatible: "fsl,mxs-audio-sgtl5000" +- model: The user-visible name of this sound complex +- saif-controllers: The phandle list of the MXS SAIF controller +- audio-codec: The phandle of the SGTL5000 audio codec + +Example: + +sound { + compatible = "fsl,imx28-evk-sgtl5000", + "fsl,mxs-audio-sgtl5000"; + model = "imx28-evk-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; +}; diff --git a/Documentation/devicetree/bindings/sound/mxs-saif.txt b/Documentation/devicetree/bindings/sound/mxs-saif.txt new file mode 100644 index 0000000000000000000000000000000000000000..c37ba6143d9b338cc9b80b66f1253f1939af9d2b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mxs-saif.txt @@ -0,0 +1,36 @@ +* Freescale MXS Serial Audio Interface (SAIF) + +Required properties: +- compatible: Should be "fsl,-saif" +- reg: Should contain registers location and length +- interrupts: Should contain ERROR and DMA interrupts +- fsl,saif-dma-channel: APBX DMA channel for the SAIF + +Optional properties: +- fsl,saif-master: phandle to the master SAIF. It's only required for + the slave SAIF. + +Note: Each SAIF controller should have an alias correctly numbered +in "aliases" node. + +Example: + +aliases { + saif0 = &saif0; + saif1 = &saif1; +}; + +saif0: saif@80042000 { + compatible = "fsl,imx28-saif"; + reg = <0x80042000 2000>; + interrupts = <59 80>; + fsl,saif-dma-channel = <4>; +}; + +saif1: saif@80046000 { + compatible = "fsl,imx28-saif"; + reg = <0x80046000 2000>; + interrupts = <58 81>; + fsl,saif-dma-channel = <5>; + fsl,saif-master = <&saif0>; +}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt new file mode 100644 index 0000000000000000000000000000000000000000..1ac7b1642186fee6e3fafea1ccaa1669aa3239dc --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt @@ -0,0 +1,32 @@ +NVIDIA Tegra30 AHUB (Audio Hub) + +Required properties: +- compatible : "nvidia,tegra30-ahub" +- reg : Should contain the register physical address and length for each of + the AHUB's APBIF registers and the AHUB's own registers. +- interrupts : Should contain AHUB interrupt +- nvidia,dma-request-selector : The Tegra DMA controller's phandle and + request selector for the first APBIF channel. +- ranges : The bus address mapping for the configlink register bus. + Can be empty since the mapping is 1:1. +- #address-cells : For the configlink bus. Should be <1>; +- #size-cells : For the configlink bus. Should be <1>. + +AHUB client modules need to specify the IDs of their CIFs (Client InterFaces). +For RX CIFs, the numbers indicate the register number within AHUB routing +register space (APBIF 0..3 RX, I2S 0..5 RX, DAM 0..2 RX 0..1, SPDIF RX 0..1). +For TX CIFs, the numbers indicate the bit position within the AHUB routing +registers (APBIF 0..3 TX, I2S 0..5 TX, DAM 0..2 TX, SPDIF TX 0..1). + +Example: + +ahub@70080000 { + compatible = "nvidia,tegra30-ahub"; + reg = <0x70080000 0x200 0x70080200 0x100>; + interrupts = < 0 103 0x04 >; + nvidia,dma-request-selector = <&apbdma 1>; + + ranges; + #address-cells = <1>; + #size-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt new file mode 100644 index 0000000000000000000000000000000000000000..dfa6c037124aeb242ffdc4c2919aae058e7543a9 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt @@ -0,0 +1,15 @@ +NVIDIA Tegra30 I2S controller + +Required properties: +- compatible : "nvidia,tegra30-i2s" +- reg : Should contain I2S registers location and length +- nvidia,ahub-cif-ids : The list of AHUB CIF IDs for this port, rx (playback) + first, tx (capture) second. See nvidia,tegra30-ahub.txt for values. + +Example: + +i2s@70002800 { + compatible = "nvidia,tegra30-i2s"; + reg = <0x70080300 0x100>; + nvidia,ahub-cif-ids = <4 4>; +}; diff --git a/Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt b/Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt new file mode 100644 index 0000000000000000000000000000000000000000..04b14cfb1f16ba1a7180066c2970d9a0829a92bf --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt @@ -0,0 +1,14 @@ +NVIDIA Tegra audio complex for TrimSlice + +Required properties: +- compatible : "nvidia,tegra-audio-trimslice" +- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller +- nvidia,audio-codec : The phandle of the WM8903 audio codec + +Example: + +sound { + compatible = "nvidia,tegra-audio-trimslice"; + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&codec>; +}; diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index c1be8066ea5914c33e9a7aacbfee66f8455741b2..03ca210406edfcbe90fc58cd006ef0e7d313b42f 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -6,14 +6,6 @@ be removed from this file. --------------------------- -What: x86 floppy disable_hlt -When: 2012 -Why: ancient workaround of dubious utility clutters the - code used by everybody else. -Who: Len Brown - ---------------------------- - What: CONFIG_APM_CPU_IDLE, and its ability to call APM BIOS in idle When: 2012 Why: This optional sub-feature of APM is of dubious reliability, @@ -539,3 +531,11 @@ Why: There appear to be no production users of the get_robust_list syscall, of ASLR. It was only ever intended for debugging, so it should be removed. Who: Kees Cook + +---------------------------- + +What: setitimer accepts user NULL pointer (value) +When: 3.6 +Why: setitimer is not returning -EFAULT if user pointer is NULL. This + violates the spec. +Who: Sasikantha Babu diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index e916e3d36488d982b4cc1a8580ea5f0529af79d2..0d0492028082c0ecda1a0931cc5100765624a80a 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -114,7 +114,7 @@ members are defined: struct file_system_type { const char *name; int fs_flags; - struct dentry (*mount) (struct file_system_type *, int, + struct dentry *(*mount) (struct file_system_type *, int, const char *, void *); void (*kill_sb) (struct super_block *); struct module *owner; diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp index a10f73624ad3d8f65dd365ba1ca225dcf64c9b01..90956b6180254915e9ff17bb968729c20e043369 100644 --- a/Documentation/hwmon/k10temp +++ b/Documentation/hwmon/k10temp @@ -11,7 +11,7 @@ Supported chips: Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra) * AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series) * AMD Family 14h processors: "Brazos" (C/E/G/Z-Series) -* AMD Family 15h processors: "Bulldozer" +* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity" Prefix: 'k10temp' Addresses scanned: PCI space diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 3b7488fc33730c3098a62cea18f6d0b0de3ef584..e34b531dc3161a18cc55fc591bd1db0e7c6991dd 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -225,6 +225,7 @@ Code Seq#(hex) Include File Comments 'j' 00-3F linux/joystick.h 'k' 00-0F linux/spi/spidev.h conflict! 'k' 00-05 video/kyro.h conflict! +'k' 10-17 linux/hsi/hsi_char.h HSI character device 'l' 00-3F linux/tcfs_fs.h transparent cryptographic file system 'l' 40-7F linux/udf_fs_i.h in development: diff --git a/Documentation/networking/driver.txt b/Documentation/networking/driver.txt index 03283daa64fef72360667fb979a256aa10a3bb91..da59e2884130cbfc8b128b5be6b222ca10da82b8 100644 --- a/Documentation/networking/driver.txt +++ b/Documentation/networking/driver.txt @@ -2,16 +2,16 @@ Document about softnet driver issues Transmit path guidelines: -1) The hard_start_xmit method must never return '1' under any - normal circumstances. It is considered a hard error unless +1) The ndo_start_xmit method must not return NETDEV_TX_BUSY under + any normal circumstances. It is considered a hard error unless there is no way your device can tell ahead of time when it's transmit function will become busy. Instead it must maintain the queue properly. For example, for a driver implementing scatter-gather this means: - static int drv_hard_start_xmit(struct sk_buff *skb, - struct net_device *dev) + static netdev_tx_t drv_hard_start_xmit(struct sk_buff *skb, + struct net_device *dev) { struct drv *dp = netdev_priv(dev); @@ -23,7 +23,7 @@ Transmit path guidelines: unlock_tx(dp); printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n", dev->name); - return 1; + return NETDEV_TX_BUSY; } ... queue packet to card ... @@ -35,6 +35,7 @@ Transmit path guidelines: ... unlock_tx(dp); ... + return NETDEV_TX_OK; } And then at the end of your TX reclamation event handling: @@ -58,15 +59,12 @@ Transmit path guidelines: TX_BUFFS_AVAIL(dp) > 0) netif_wake_queue(dp->dev); -2) Do not forget to update netdev->trans_start to jiffies after - each new tx packet is given to the hardware. - -3) A hard_start_xmit method must not modify the shared parts of a +2) An ndo_start_xmit method must not modify the shared parts of a cloned SKB. -4) Do not forget that once you return 0 from your hard_start_xmit - method, it is your driver's responsibility to free up the SKB - and in some finite amount of time. +3) Do not forget that once you return NETDEV_TX_OK from your + ndo_start_xmit method, it is your driver's responsibility to free + up the SKB and in some finite amount of time. For example, this means that it is not allowed for your TX mitigation scheme to let TX packets "hang out" in the TX @@ -74,8 +72,9 @@ Transmit path guidelines: This error can deadlock sockets waiting for send buffer room to be freed up. - If you return 1 from the hard_start_xmit method, you must not keep - any reference to that SKB and you must not attempt to free it up. + If you return NETDEV_TX_BUSY from the ndo_start_xmit method, you + must not keep any reference to that SKB and you must not attempt + to free it up. Probing guidelines: @@ -85,10 +84,10 @@ Probing guidelines: Close/stop guidelines: -1) After the dev->stop routine has been called, the hardware must +1) After the ndo_stop routine has been called, the hardware must not receive or transmit any data. All in flight packets must be aborted. If necessary, poll or wait for completion of any reset commands. -2) The dev->stop routine will be called by unregister_netdevice +2) The ndo_stop routine will be called by unregister_netdevice if device is still UP. diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index ad3e80e17b4f49a287c1d97d39e38cd8b092aa86..1619a8c8087341477621388701fec82ca832b70b 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -147,7 +147,7 @@ tcp_adv_win_scale - INTEGER (if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale), if it is <= 0. Possible values are [-31, 31], inclusive. - Default: 2 + Default: 1 tcp_allowed_congestion_control - STRING Show/set the congestion control choices available to non-privileged @@ -410,7 +410,7 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max net.core.rmem_max. Calling setsockopt() with SO_RCVBUF disables automatic tuning of that socket's receive buffer size, in which case this value is ignored. - Default: between 87380B and 4MB, depending on RAM size. + Default: between 87380B and 6MB, depending on RAM size. tcp_sack - BOOLEAN Enable select acknowledgments (SACKS). @@ -604,15 +604,8 @@ IP Variables: ip_local_port_range - 2 INTEGERS Defines the local port range that is used by TCP and UDP to choose the local port. The first number is the first, the - second the last local port number. Default value depends on - amount of memory available on the system: - > 128Mb 32768-61000 - < 128Mb 1024-4999 or even less. - This number defines number of active connections, which this - system can issue simultaneously to systems not supporting - TCP extensions (timestamps). With tcp_tw_recycle enabled - (i.e. by default) range 1024-4999 is enough to issue up to - 2000 connections per second to systems supporting timestamps. + second the last local port number. The default values are + 32768 and 61000 respectively. ip_local_reserved_ports - list of comma separated ranges Specify the ports which are reserved for known third-party diff --git a/Documentation/networking/netdevices.txt b/Documentation/networking/netdevices.txt index 89358341682a1290879d26b854c1527991b54768..c7ecc7080494da43fc469eac5b62b06905c13559 100644 --- a/Documentation/networking/netdevices.txt +++ b/Documentation/networking/netdevices.txt @@ -47,26 +47,25 @@ packets is preferred. struct net_device synchronization rules ======================================= -dev->open: +ndo_open: Synchronization: rtnl_lock() semaphore. Context: process -dev->stop: +ndo_stop: Synchronization: rtnl_lock() semaphore. Context: process - Note1: netif_running() is guaranteed false - Note2: dev->poll() is guaranteed to be stopped + Note: netif_running() is guaranteed false -dev->do_ioctl: +ndo_do_ioctl: Synchronization: rtnl_lock() semaphore. Context: process -dev->get_stats: +ndo_get_stats: Synchronization: dev_base_lock rwlock. Context: nominally process, but don't sleep inside an rwlock -dev->hard_start_xmit: - Synchronization: netif_tx_lock spinlock. +ndo_start_xmit: + Synchronization: __netif_tx_lock spinlock. When the driver sets NETIF_F_LLTX in dev->features this will be called without holding netif_tx_lock. In this case the driver @@ -87,20 +86,20 @@ dev->hard_start_xmit: o NETDEV_TX_LOCKED Locking failed, please retry quickly. Only valid when NETIF_F_LLTX is set. -dev->tx_timeout: - Synchronization: netif_tx_lock spinlock. +ndo_tx_timeout: + Synchronization: netif_tx_lock spinlock; all TX queues frozen. Context: BHs disabled Notes: netif_queue_stopped() is guaranteed true -dev->set_rx_mode: - Synchronization: netif_tx_lock spinlock. +ndo_set_rx_mode: + Synchronization: netif_addr_lock spinlock. Context: BHs disabled struct napi_struct synchronization rules ======================================== napi->poll: Synchronization: NAPI_STATE_SCHED bit in napi->state. Device - driver's dev->close method will invoke napi_disable() on + driver's ndo_stop method will invoke napi_disable() on all NAPI instances which will do a sleeping poll on the NAPI_STATE_SCHED napi->state bit, waiting for all pending NAPI activity to cease. diff --git a/Documentation/power/freezing-of-tasks.txt b/Documentation/power/freezing-of-tasks.txt index ec715cd78fbb7028bde53c0664a513701b162858..6ec291ea1c78c64e4e1ec35ad614336859ab4c31 100644 --- a/Documentation/power/freezing-of-tasks.txt +++ b/Documentation/power/freezing-of-tasks.txt @@ -9,7 +9,7 @@ architectures). II. How does it work? -There are four per-task flags used for that, PF_NOFREEZE, PF_FROZEN, TIF_FREEZE +There are three per-task flags used for that, PF_NOFREEZE, PF_FROZEN and PF_FREEZER_SKIP (the last one is auxiliary). The tasks that have PF_NOFREEZE unset (all user space processes and some kernel threads) are regarded as 'freezable' and treated in a special way before the system enters a @@ -17,30 +17,31 @@ suspend state as well as before a hibernation image is created (in what follows we only consider hibernation, but the description also applies to suspend). Namely, as the first step of the hibernation procedure the function -freeze_processes() (defined in kernel/power/process.c) is called. It executes -try_to_freeze_tasks() that sets TIF_FREEZE for all of the freezable tasks and -either wakes them up, if they are kernel threads, or sends fake signals to them, -if they are user space processes. A task that has TIF_FREEZE set, should react -to it by calling the function called __refrigerator() (defined in -kernel/freezer.c), which sets the task's PF_FROZEN flag, changes its state -to TASK_UNINTERRUPTIBLE and makes it loop until PF_FROZEN is cleared for it. -Then, we say that the task is 'frozen' and therefore the set of functions -handling this mechanism is referred to as 'the freezer' (these functions are -defined in kernel/power/process.c, kernel/freezer.c & include/linux/freezer.h). -User space processes are generally frozen before kernel threads. +freeze_processes() (defined in kernel/power/process.c) is called. A system-wide +variable system_freezing_cnt (as opposed to a per-task flag) is used to indicate +whether the system is to undergo a freezing operation. And freeze_processes() +sets this variable. After this, it executes try_to_freeze_tasks() that sends a +fake signal to all user space processes, and wakes up all the kernel threads. +All freezable tasks must react to that by calling try_to_freeze(), which +results in a call to __refrigerator() (defined in kernel/freezer.c), which sets +the task's PF_FROZEN flag, changes its state to TASK_UNINTERRUPTIBLE and makes +it loop until PF_FROZEN is cleared for it. Then, we say that the task is +'frozen' and therefore the set of functions handling this mechanism is referred +to as 'the freezer' (these functions are defined in kernel/power/process.c, +kernel/freezer.c & include/linux/freezer.h). User space processes are generally +frozen before kernel threads. __refrigerator() must not be called directly. Instead, use the try_to_freeze() function (defined in include/linux/freezer.h), that checks -the task's TIF_FREEZE flag and makes the task enter __refrigerator() if the -flag is set. +if the task is to be frozen and makes the task enter __refrigerator(). For user space processes try_to_freeze() is called automatically from the signal-handling code, but the freezable kernel threads need to call it explicitly in suitable places or use the wait_event_freezable() or wait_event_freezable_timeout() macros (defined in include/linux/freezer.h) -that combine interruptible sleep with checking if TIF_FREEZE is set and calling -try_to_freeze(). The main loop of a freezable kernel thread may look like the -following one: +that combine interruptible sleep with checking if the task is to be frozen and +calling try_to_freeze(). The main loop of a freezable kernel thread may look +like the following one: set_freezable(); do { @@ -53,7 +54,7 @@ following one: (from drivers/usb/core/hub.c::hub_thread()). If a freezable kernel thread fails to call try_to_freeze() after the freezer has -set TIF_FREEZE for it, the freezing of tasks will fail and the entire +initiated a freezing operation, the freezing of tasks will fail and the entire hibernation operation will be cancelled. For this reason, freezable kernel threads must call try_to_freeze() somewhere or use one of the wait_event_freezable() and wait_event_freezable_timeout() macros. diff --git a/Documentation/security/keys.txt b/Documentation/security/keys.txt index 787717091421d54ec330f51bdaed0f2520749da8..d389acd31e19405410ca87acbe689739e0d35771 100644 --- a/Documentation/security/keys.txt +++ b/Documentation/security/keys.txt @@ -123,7 +123,7 @@ KEY SERVICE OVERVIEW The key service provides a number of features besides keys: - (*) The key service defines two special key types: + (*) The key service defines three special key types: (+) "keyring" @@ -137,6 +137,18 @@ The key service provides a number of features besides keys: blobs of data. These can be created, updated and read by userspace, and aren't intended for use by kernel services. + (+) "logon" + + Like a "user" key, a "logon" key has a payload that is an arbitrary + blob of data. It is intended as a place to store secrets which are + accessible to the kernel but not to userspace programs. + + The description can be arbitrary, but must be prefixed with a non-zero + length string that describes the key "subclass". The subclass is + separated from the rest of the description by a ':'. "logon" keys can + be created and updated from userspace, but the payload is only + readable from kernel space. + (*) Each process subscribes to three keyrings: a thread-specific keyring, a process-specific keyring, and a session-specific keyring. diff --git a/Documentation/usb/URB.txt b/Documentation/usb/URB.txt index 8ffce746d496fc41de3cfadf7ad02af5f7fa6637..00d2c644068e9ae5d0e0044150289f0976a0ae9d 100644 --- a/Documentation/usb/URB.txt +++ b/Documentation/usb/URB.txt @@ -168,6 +168,28 @@ that if the completion handler or anyone else tries to resubmit it they will get a -EPERM error. Thus you can be sure that when usb_kill_urb() returns, the URB is totally idle. +There is a lifetime issue to consider. An URB may complete at any +time, and the completion handler may free the URB. If this happens +while usb_unlink_urb or usb_kill_urb is running, it will cause a +memory-access violation. The driver is responsible for avoiding this, +which often means some sort of lock will be needed to prevent the URB +from being deallocated while it is still in use. + +On the other hand, since usb_unlink_urb may end up calling the +completion handler, the handler must not take any lock that is held +when usb_unlink_urb is invoked. The general solution to this problem +is to increment the URB's reference count while holding the lock, then +drop the lock and call usb_unlink_urb or usb_kill_urb, and then +decrement the URB's reference count. You increment the reference +count by calling + + struct urb *usb_get_urb(struct urb *urb) + +(ignore the return value; it is the same as the argument) and +decrement the reference count by calling usb_free_urb. Of course, +none of this is necessary if there's no danger of the URB being freed +by the completion handler. + 1.7. What about the completion handler? diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt index 5335fa8b06eb4f2b632126bd9fd95878b6efdce0..c42bb9cd3b43749837f1c784a2571cb6d42bf03f 100644 --- a/Documentation/usb/usbmon.txt +++ b/Documentation/usb/usbmon.txt @@ -183,10 +183,10 @@ An input control transfer to get a port status. d5ea89a0 3575914555 S Ci:1:001:0 s a3 00 0000 0003 0004 4 < d5ea89a0 3575914560 C Ci:1:001:0 0 4 = 01050000 -An output bulk transfer to send a SCSI command 0x5E in a 31-byte Bulk wrapper -to a storage device at address 5: +An output bulk transfer to send a SCSI command 0x28 (READ_10) in a 31-byte +Bulk wrapper to a storage device at address 5: -dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 5e000000 00000000 00000600 00000000 00000000 00000000 000000 +dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 ad000000 00800000 80010a28 20000000 20000040 00000000 000000 dd65f0e8 4128379808 C Bo:1:005:2 0 31 > * Raw binary format and API diff --git a/MAINTAINERS b/MAINTAINERS index 5190cf25fd8da03ca9d9bc834064f1e76e001bc3..fc203d019e61f4ac439b4d47c0ec7f63b1b91952 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -228,7 +228,7 @@ M: Len Brown L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ Q: http://patchwork.kernel.org/project/linux-acpi/list/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux S: Supported F: drivers/acpi/ F: drivers/pnp/pnpacpi/ @@ -1251,7 +1251,6 @@ ATHEROS ATH5K WIRELESS DRIVER M: Jiri Slaby M: Nick Kossifidis M: "Luis R. Rodriguez" -M: Bob Copeland L: linux-wireless@vger.kernel.org L: ath5k-devel@lists.ath5k.org W: http://wireless.kernel.org/en/users/Drivers/ath5k @@ -1522,8 +1521,8 @@ M: Gustavo Padovan M: Johan Hedberg L: linux-bluetooth@vger.kernel.org W: http://www.bluez.org/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth.git -T: git git://git.kernel.org/pub/scm/linux/kernel/git/jh/bluetooth.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git S: Maintained F: drivers/bluetooth/ @@ -1533,8 +1532,8 @@ M: Gustavo Padovan M: Johan Hedberg L: linux-bluetooth@vger.kernel.org W: http://www.bluez.org/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth.git -T: git git://git.kernel.org/pub/scm/linux/kernel/git/jh/bluetooth.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git S: Maintained F: net/bluetooth/ F: include/net/bluetooth/ @@ -1969,10 +1968,9 @@ S: Maintained F: drivers/net/ethernet/ti/cpmac.c CPU FREQUENCY DRIVERS -M: Dave Jones +M: Rafael J. Wysocki L: cpufreq@vger.kernel.org -W: http://www.codemonkey.org.uk/projects/cpufreq/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git +L: linux-pm@vger.kernel.org S: Maintained F: drivers/cpufreq/ F: include/linux/cpufreq.h @@ -2322,9 +2320,9 @@ S: Supported F: drivers/acpi/dock.c DOCUMENTATION -M: Randy Dunlap +M: Rob Landley L: linux-doc@vger.kernel.org -T: quilt http://xenotime.net/kernel-doc-patches/current/ +T: TBD S: Maintained F: Documentation/ @@ -2451,17 +2449,17 @@ F: fs/ecryptfs/ EDAC-CORE M: Doug Thompson -L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-edac@vger.kernel.org W: bluesmoke.sourceforge.net S: Supported F: Documentation/edac.txt -F: drivers/edac/edac_* +F: drivers/edac/ F: include/linux/edac.h EDAC-AMD64 M: Doug Thompson M: Borislav Petkov -L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-edac@vger.kernel.org W: bluesmoke.sourceforge.net S: Supported F: drivers/edac/amd64_edac* @@ -2469,35 +2467,35 @@ F: drivers/edac/amd64_edac* EDAC-E752X M: Mark Gross M: Doug Thompson -L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-edac@vger.kernel.org W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/e752x_edac.c EDAC-E7XXX M: Doug Thompson -L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-edac@vger.kernel.org W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/e7xxx_edac.c EDAC-I82443BXGX M: Tim Small -L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-edac@vger.kernel.org W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/i82443bxgx_edac.c EDAC-I3000 M: Jason Uhlenkott -L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-edac@vger.kernel.org W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/i3000_edac.c EDAC-I5000 M: Doug Thompson -L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-edac@vger.kernel.org W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/i5000_edac.c @@ -2526,21 +2524,21 @@ F: drivers/edac/i7core_edac.c EDAC-I82975X M: Ranganathan Desikan M: "Arvind R." -L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-edac@vger.kernel.org W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/i82975x_edac.c EDAC-PASEMI M: Egor Martovetsky -L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-edac@vger.kernel.org W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/pasemi_edac.c EDAC-R82600 M: Tim Small -L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-edac@vger.kernel.org W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/r82600_edac.c @@ -3557,17 +3555,13 @@ L: linux-pm@vger.kernel.org S: Supported F: arch/x86/platform/mrst/pmu.* -INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT +INTEL PRO/WIRELESS 2100, 2200BG, 2915ABG NETWORK CONNECTION SUPPORT +M: Stanislav Yakovlev L: linux-wireless@vger.kernel.org -S: Orphan +S: Maintained F: Documentation/networking/README.ipw2100 -F: drivers/net/wireless/ipw2x00/ipw2100.* - -INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT -L: linux-wireless@vger.kernel.org -S: Orphan F: Documentation/networking/README.ipw2200 -F: drivers/net/wireless/ipw2x00/ipw2200.* +F: drivers/net/wireless/ipw2x00/ INTEL(R) TRUSTED EXECUTION TECHNOLOGY (TXT) M: Joseph Cihula @@ -3597,6 +3591,7 @@ S: Supported F: drivers/net/wireless/iwlegacy/ INTEL WIRELESS WIFI LINK (iwlwifi) +M: Johannes Berg M: Wey-Yi Guy M: Intel Linux Wireless L: linux-wireless@vger.kernel.org @@ -4041,6 +4036,7 @@ F: Documentation/scsi/53c700.txt F: drivers/scsi/53c700* LED SUBSYSTEM +M: Bryan Wu M: Richard Purdie S: Maintained F: drivers/leds/ @@ -4314,6 +4310,13 @@ W: http://www.kernel.org/doc/man-pages L: linux-man@vger.kernel.org S: Maintained +MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2) +M: Mirko Lindner +M: Stephen Hemminger +L: netdev@vger.kernel.org +S: Maintained +F: drivers/net/ethernet/marvell/sk* + MARVELL LIBERTAS WIRELESS DRIVER M: Dan Williams L: libertas-dev@lists.infradead.org @@ -4344,12 +4347,6 @@ M: Nicolas Pitre S: Odd Fixes F: drivers/mmc/host/mvsdio.* -MARVELL YUKON / SYSKONNECT DRIVER -M: Mirko Lindner -M: Ralph Roesler -W: http://www.syskonnect.com -S: Supported - MATROX FRAMEBUFFER DRIVER L: linux-fbdev@vger.kernel.org S: Orphan @@ -4537,8 +4534,7 @@ S: Supported F: drivers/net/ethernet/myricom/myri10ge/ NATSEMI ETHERNET DRIVER (DP8381x) -M: Tim Hockin -S: Maintained +S: Orphan F: drivers/net/ethernet/natsemi/natsemi.c NATIVE INSTRUMENTS USB SOUND INTERFACE DRIVER @@ -5122,6 +5118,11 @@ F: drivers/i2c/busses/i2c-pca-* F: include/linux/i2c-algo-pca.h F: include/linux/i2c-pca-platform.h +PCDP - PRIMARY CONSOLE AND DEBUG PORT +M: Khalid Aziz +S: Maintained +F: drivers/firmware/pcdp.* + PCI ERROR RECOVERY M: Linas Vepstas L: linux-pci@vger.kernel.org @@ -5643,7 +5644,7 @@ M: Ohad Ben-Cohen S: Maintained F: drivers/remoteproc/ F: Documentation/remoteproc.txt -F: include/linux/remoteproc.txt +F: include/linux/remoteproc.h RFKILL M: Johannes Berg @@ -5891,11 +5892,11 @@ F: Documentation/scsi/st.txt F: drivers/scsi/st* SCTP PROTOCOL -M: Vlad Yasevich +M: Vlad Yasevich M: Sridhar Samudrala L: linux-sctp@vger.kernel.org W: http://lksctp.sourceforge.net -S: Supported +S: Maintained F: Documentation/networking/sctp.txt F: include/linux/sctp.h F: include/net/sctp/ @@ -6122,12 +6123,6 @@ W: http://www.winischhofer.at/linuxsisusbvga.shtml S: Maintained F: drivers/usb/misc/sisusbvga/ -SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS -M: Stephen Hemminger -L: netdev@vger.kernel.org -S: Maintained -F: drivers/net/ethernet/marvell/sk* - SLAB ALLOCATOR M: Christoph Lameter M: Pekka Enberg @@ -6293,6 +6288,15 @@ F: drivers/tty/serial/sunsu.c F: drivers/tty/serial/sunzilog.c F: drivers/tty/serial/sunzilog.h +SPARSE CHECKER +M: "Christopher Li" +L: linux-sparse@vger.kernel.org +W: https://sparse.wiki.kernel.org/ +T: git git://git.kernel.org/pub/scm/devel/sparse/sparse.git +T: git git://git.kernel.org/pub/scm/devel/sparse/chrisl/sparse.git +S: Maintained +F: include/linux/compiler.h + SPEAR PLATFORM SUPPORT M: Viresh Kumar L: spear-devel@list.st.com @@ -6468,6 +6472,7 @@ S: Odd Fixes F: drivers/staging/olpc_dcon/ STAGING - OZMO DEVICES USB OVER WIFI DRIVER +M: Rupesh Gujare M: Chris Kelly S: Maintained F: drivers/staging/ozwpan/ @@ -6665,6 +6670,12 @@ F: drivers/misc/tifm* F: drivers/mmc/host/tifm_sd.c F: include/linux/tifm.h +TI LM49xxx FAMILY ASoC CODEC DRIVERS +M: M R Swami Reddy +L: alsa-devel@alsa-project.org (moderated for non-subscribers) +S: Maintained +F: sound/soc/codecs/lm49453* + TI TWL4030 SERIES SOC CODEC DRIVER M: Peter Ujfalusi L: alsa-devel@alsa-project.org (moderated for non-subscribers) @@ -7574,8 +7585,8 @@ F: Documentation/filesystems/xfs.txt F: fs/xfs/ XILINX AXI ETHERNET DRIVER -M: Ariane Keller -M: Daniel Borkmann +M: Anirudha Sarangi +M: John Linn S: Maintained F: drivers/net/ethernet/xilinx/xilinx_axienet* diff --git a/Makefile b/Makefile index 5e637c23974e6e1d57721c4051cc3b253a43d579..48bd1f50dcc39eada16b28883cee05d34b5f3f15 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 4 SUBLEVEL = 0 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc7 NAME = Saber-toothed Squirrel # *DOCUMENTATION* diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 56a4df952fb0f2e68889229133e38b2b34de4716..22e58a99f38b0fd19232ec8fec64249ca429846f 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -477,7 +477,7 @@ config ALPHA_BROKEN_IRQ_MASK config VGA_HOSE bool - depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI + depends on VGA_CONSOLE && (ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI) default y help Support VGA on an arbitrary hose; needed for several platforms diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h index f62251e82ffac39579e26c0ee6f77f58c1bd9ac5..3bb7ffeae3bc610010bb54a3eaba698c513c0c7d 100644 --- a/arch/alpha/include/asm/atomic.h +++ b/arch/alpha/include/asm/atomic.h @@ -3,6 +3,7 @@ #include #include +#include /* * Atomic operations that C can't guarantee us. Useful for @@ -168,73 +169,6 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v) return result; } -/* - * Atomic exchange routines. - */ - -#define __ASM__MB -#define ____xchg(type, args...) __xchg ## type ## _local(args) -#define ____cmpxchg(type, args...) __cmpxchg ## type ## _local(args) -#include - -#define xchg_local(ptr,x) \ - ({ \ - __typeof__(*(ptr)) _x_ = (x); \ - (__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_, \ - sizeof(*(ptr))); \ - }) - -#define cmpxchg_local(ptr, o, n) \ - ({ \ - __typeof__(*(ptr)) _o_ = (o); \ - __typeof__(*(ptr)) _n_ = (n); \ - (__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_, \ - (unsigned long)_n_, \ - sizeof(*(ptr))); \ - }) - -#define cmpxchg64_local(ptr, o, n) \ - ({ \ - BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ - cmpxchg_local((ptr), (o), (n)); \ - }) - -#ifdef CONFIG_SMP -#undef __ASM__MB -#define __ASM__MB "\tmb\n" -#endif -#undef ____xchg -#undef ____cmpxchg -#define ____xchg(type, args...) __xchg ##type(args) -#define ____cmpxchg(type, args...) __cmpxchg ##type(args) -#include - -#define xchg(ptr,x) \ - ({ \ - __typeof__(*(ptr)) _x_ = (x); \ - (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, \ - sizeof(*(ptr))); \ - }) - -#define cmpxchg(ptr, o, n) \ - ({ \ - __typeof__(*(ptr)) _o_ = (o); \ - __typeof__(*(ptr)) _n_ = (n); \ - (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ - (unsigned long)_n_, sizeof(*(ptr)));\ - }) - -#define cmpxchg64(ptr, o, n) \ - ({ \ - BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ - cmpxchg((ptr), (o), (n)); \ - }) - -#undef __ASM__MB -#undef ____cmpxchg - -#define __HAVE_ARCH_CMPXCHG 1 - #define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new)) #define atomic64_xchg(v, new) (xchg(&((v)->counter), new)) diff --git a/arch/alpha/include/asm/cmpxchg.h b/arch/alpha/include/asm/cmpxchg.h new file mode 100644 index 0000000000000000000000000000000000000000..429e8cd0d78e5a8f7aaeafacc3f36fae0c6a49c4 --- /dev/null +++ b/arch/alpha/include/asm/cmpxchg.h @@ -0,0 +1,71 @@ +#ifndef _ALPHA_CMPXCHG_H +#define _ALPHA_CMPXCHG_H + +/* + * Atomic exchange routines. + */ + +#define __ASM__MB +#define ____xchg(type, args...) __xchg ## type ## _local(args) +#define ____cmpxchg(type, args...) __cmpxchg ## type ## _local(args) +#include + +#define xchg_local(ptr, x) \ +({ \ + __typeof__(*(ptr)) _x_ = (x); \ + (__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_, \ + sizeof(*(ptr))); \ +}) + +#define cmpxchg_local(ptr, o, n) \ +({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_, \ + (unsigned long)_n_, \ + sizeof(*(ptr))); \ +}) + +#define cmpxchg64_local(ptr, o, n) \ +({ \ + BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ + cmpxchg_local((ptr), (o), (n)); \ +}) + +#ifdef CONFIG_SMP +#undef __ASM__MB +#define __ASM__MB "\tmb\n" +#endif +#undef ____xchg +#undef ____cmpxchg +#define ____xchg(type, args...) __xchg ##type(args) +#define ____cmpxchg(type, args...) __cmpxchg ##type(args) +#include + +#define xchg(ptr, x) \ +({ \ + __typeof__(*(ptr)) _x_ = (x); \ + (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, \ + sizeof(*(ptr))); \ +}) + +#define cmpxchg(ptr, o, n) \ +({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ + (unsigned long)_n_, sizeof(*(ptr)));\ +}) + +#define cmpxchg64(ptr, o, n) \ +({ \ + BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ + cmpxchg((ptr), (o), (n)); \ +}) + +#undef __ASM__MB +#undef ____cmpxchg + +#define __HAVE_ARCH_CMPXCHG 1 + +#endif /* _ALPHA_CMPXCHG_H */ diff --git a/arch/alpha/include/asm/dma-mapping.h b/arch/alpha/include/asm/dma-mapping.h index 4567aca6fdd6ef32e3730c60fa725b98f299d8aa..dfa32f0613201a92c5c6e5bf81443302deff46ac 100644 --- a/arch/alpha/include/asm/dma-mapping.h +++ b/arch/alpha/include/asm/dma-mapping.h @@ -12,16 +12,22 @@ static inline struct dma_map_ops *get_dma_ops(struct device *dev) #include -static inline void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t gfp) +#define dma_alloc_coherent(d,s,h,f) dma_alloc_attrs(d,s,h,f,NULL) + +static inline void *dma_alloc_attrs(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp, + struct dma_attrs *attrs) { - return get_dma_ops(dev)->alloc_coherent(dev, size, dma_handle, gfp); + return get_dma_ops(dev)->alloc(dev, size, dma_handle, gfp, attrs); } -static inline void dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle) +#define dma_free_coherent(d,s,c,h) dma_free_attrs(d,s,c,h,NULL) + +static inline void dma_free_attrs(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle, + struct dma_attrs *attrs) { - get_dma_ops(dev)->free_coherent(dev, size, vaddr, dma_handle); + get_dma_ops(dev)->free(dev, size, vaddr, dma_handle, attrs); } static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) diff --git a/arch/alpha/include/asm/rtc.h b/arch/alpha/include/asm/rtc.h index 1f7fba671ae68a25f204cf819e3e04bde362810e..d70408d36677c86d0fbd8ce90530724e54d15a57 100644 --- a/arch/alpha/include/asm/rtc.h +++ b/arch/alpha/include/asm/rtc.h @@ -1,14 +1,10 @@ #ifndef _ALPHA_RTC_H #define _ALPHA_RTC_H -#if defined(CONFIG_ALPHA_GENERIC) +#if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP) \ + || defined(CONFIG_ALPHA_GENERIC) # define get_rtc_time alpha_mv.rtc_get_time # define set_rtc_time alpha_mv.rtc_set_time -#else -# if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP) -# define get_rtc_time marvel_get_rtc_time -# define set_rtc_time marvel_set_rtc_time -# endif #endif #include diff --git a/arch/alpha/include/asm/xchg.h b/arch/alpha/include/asm/xchg.h index 1d1b436fbff252bc867c8e577c7b8759bc55cc20..0ca9724597c1603024ff26d366013bc2da92387b 100644 --- a/arch/alpha/include/asm/xchg.h +++ b/arch/alpha/include/asm/xchg.h @@ -1,10 +1,10 @@ -#ifndef _ALPHA_ATOMIC_H +#ifndef _ALPHA_CMPXCHG_H #error Do not include xchg.h directly! #else /* * xchg/xchg_local and cmpxchg/cmpxchg_local share the same code * except that local version do not have the expensive memory barrier. - * So this file is included twice from asm/system.h. + * So this file is included twice from asm/cmpxchg.h. */ /* diff --git a/arch/alpha/kernel/core_tsunami.c b/arch/alpha/kernel/core_tsunami.c index 5e7c28f92f19f29dde28d0e636ceb696f1750457..61893d7bdda552ac50e9fadadf957c6b6badb668 100644 --- a/arch/alpha/kernel/core_tsunami.c +++ b/arch/alpha/kernel/core_tsunami.c @@ -11,6 +11,7 @@ #include #undef __EXTERN_INLINE +#include #include #include #include diff --git a/arch/alpha/kernel/pci-noop.c b/arch/alpha/kernel/pci-noop.c index 04eea4894ef33bc84c60335fc1e79e31553bd328..df24b76f92461a5df780059eea1488e3b50945e7 100644 --- a/arch/alpha/kernel/pci-noop.c +++ b/arch/alpha/kernel/pci-noop.c @@ -108,7 +108,8 @@ sys_pciconfig_write(unsigned long bus, unsigned long dfn, } static void *alpha_noop_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t gfp) + dma_addr_t *dma_handle, gfp_t gfp, + struct dma_attrs *attrs) { void *ret; @@ -123,7 +124,8 @@ static void *alpha_noop_alloc_coherent(struct device *dev, size_t size, } static void alpha_noop_free_coherent(struct device *dev, size_t size, - void *cpu_addr, dma_addr_t dma_addr) + void *cpu_addr, dma_addr_t dma_addr, + struct dma_attrs *attrs) { free_pages((unsigned long)cpu_addr, get_order(size)); } @@ -174,8 +176,8 @@ static int alpha_noop_set_mask(struct device *dev, u64 mask) } struct dma_map_ops alpha_noop_ops = { - .alloc_coherent = alpha_noop_alloc_coherent, - .free_coherent = alpha_noop_free_coherent, + .alloc = alpha_noop_alloc_coherent, + .free = alpha_noop_free_coherent, .map_page = alpha_noop_map_page, .map_sg = alpha_noop_map_sg, .mapping_error = alpha_noop_mapping_error, diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c index 43610804987dd454556307627753e79cbc457a94..cd634795aa9cda898c4f129b46e94e7d1475c785 100644 --- a/arch/alpha/kernel/pci_iommu.c +++ b/arch/alpha/kernel/pci_iommu.c @@ -434,7 +434,8 @@ static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr, else DMA_ADDRP is undefined. */ static void *alpha_pci_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_addrp, gfp_t gfp) + dma_addr_t *dma_addrp, gfp_t gfp, + struct dma_attrs *attrs) { struct pci_dev *pdev = alpha_gendev_to_pci(dev); void *cpu_addr; @@ -478,7 +479,8 @@ try_again: DMA_ADDR past this call are illegal. */ static void alpha_pci_free_coherent(struct device *dev, size_t size, - void *cpu_addr, dma_addr_t dma_addr) + void *cpu_addr, dma_addr_t dma_addr, + struct dma_attrs *attrs) { struct pci_dev *pdev = alpha_gendev_to_pci(dev); pci_unmap_single(pdev, dma_addr, size, PCI_DMA_BIDIRECTIONAL); @@ -952,8 +954,8 @@ static int alpha_pci_set_mask(struct device *dev, u64 mask) } struct dma_map_ops alpha_pci_ops = { - .alloc_coherent = alpha_pci_alloc_coherent, - .free_coherent = alpha_pci_free_coherent, + .alloc = alpha_pci_alloc_coherent, + .free = alpha_pci_free_coherent, .map_page = alpha_pci_map_page, .unmap_page = alpha_pci_unmap_page, .map_sg = alpha_pci_map_sg, diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c index 6f7feb5db27193f33e24e962e4d1be257d8464ef..35f2ef44de12629cfa166cef50f23b5e72b365cb 100644 --- a/arch/alpha/kernel/signal.c +++ b/arch/alpha/kernel/signal.c @@ -120,12 +120,13 @@ SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act, */ SYSCALL_DEFINE1(sigsuspend, old_sigset_t, mask) { - mask &= _BLOCKABLE; - spin_lock_irq(¤t->sighand->siglock); + sigset_t blocked; + current->saved_sigmask = current->blocked; - siginitset(¤t->blocked, mask); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + + mask &= _BLOCKABLE; + siginitset(&blocked, mask); + set_current_blocked(&blocked); current->state = TASK_INTERRUPTIBLE; schedule(); @@ -238,10 +239,7 @@ do_sigreturn(struct sigcontext __user *sc, struct pt_regs *regs, goto give_sigsegv; sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&set); if (restore_sigcontext(sc, regs, sw)) goto give_sigsegv; @@ -276,10 +274,7 @@ do_rt_sigreturn(struct rt_sigframe __user *frame, struct pt_regs *regs, goto give_sigsegv; sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&set); if (restore_sigcontext(&frame->uc.uc_mcontext, regs, sw)) goto give_sigsegv; @@ -501,14 +496,8 @@ handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info, else ret = setup_frame(sig, ka, oldset, regs, sw); - if (ret == 0) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); - if (!(ka->sa.sa_flags & SA_NODEFER)) - sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + if (ret == 0) + block_sigmask(ka, sig); return ret; } diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c index 4087a569b43b15f7f135241c88092395651a4a7a..50d438db1f6ba3d8fc7131c30d340bb7d293d414 100644 --- a/arch/alpha/kernel/smp.c +++ b/arch/alpha/kernel/smp.c @@ -450,7 +450,7 @@ setup_smp(void) smp_num_probed = 1; } - printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_map = %lx\n", + printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_mask = %lx\n", smp_num_probed, cpumask_bits(cpu_present_mask)[0]); } diff --git a/arch/alpha/kernel/sys_marvel.c b/arch/alpha/kernel/sys_marvel.c index 14a4b6a7cf59d3fa94b121714c7e3c67792618e8..407accc808777bc4a6f36fa6b912b92686d09a0b 100644 --- a/arch/alpha/kernel/sys_marvel.c +++ b/arch/alpha/kernel/sys_marvel.c @@ -317,7 +317,7 @@ marvel_init_irq(void) } static int -marvel_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +marvel_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { struct pci_controller *hose = dev->sysdata; struct io7_port *io7_port = hose->sysdata; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 93180845ae164dbeeca41a27dfce6fda553bcb3d..36586dba6fa6e0af6260dce3827cfe1495c7f592 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -338,6 +338,7 @@ config ARCH_AT91 select HAVE_CLK select CLKDEV_LOOKUP select IRQ_DOMAIN + select NEED_MACH_IO_H if PCCARD help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 processors. @@ -1185,6 +1186,15 @@ if !MMU source "arch/arm/Kconfig-nommu" endif +config ARM_ERRATA_326103 + bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory" + depends on CPU_V6 + help + Executing a SWP instruction to read-only memory does not set bit 11 + of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to + treat the access as a read, preventing a COW from occurring and + causing the faulting task to livelock. + config ARM_ERRATA_411920 bool "ARM errata: Invalidation of the Instruction Cache operation can fail" depends on CPU_V6 || CPU_V6K diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c index 6ce11c4811786389b830d497814c5338983cc723..797f04bedb47e4175ed8cdc707efe12a71ec0693 100644 --- a/arch/arm/boot/compressed/atags_to_fdt.c +++ b/arch/arm/boot/compressed/atags_to_fdt.c @@ -77,6 +77,8 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space) } else if (atag->hdr.tag == ATAG_MEM) { if (memcount >= sizeof(mem_reg_property)/4) continue; + if (!atag->u.mem.size) + continue; mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start); mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size); } else if (atag->hdr.tag == ATAG_INITRD2) { diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 5f6045f1766cc758a94c14d2de2d01164179637a..dc7e8ce8e6bed9ad10a696de4c8bbecdb909fdad 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -273,7 +273,7 @@ restart: adr r0, LC0 add r0, r0, #0x100 mov r1, r6 sub r2, sp, r6 - blne atags_to_fdt + bleq atags_to_fdt ldmfd sp!, {r0-r3, ip, lr} sub sp, sp, #0x10000 diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 92f36627e7f8a3414ba87f020b051b5c283b69eb..773ef484037a91fd5613d26b2029a7c89f083eed 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -35,7 +35,7 @@ }; }; - memory@20000000 { + memory { reg = <0x20000000 0x08000000>; }; @@ -55,7 +55,6 @@ #interrupt-cells = <2>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; - interrupt-parent; reg = <0xfffff000 0x200>; }; diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index ac0dc0031dda310caac9ff77f54c56131c0281b6..7829a4d0cb22e2b4c010def2ca689e46c7682044 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -37,8 +37,8 @@ usb0: ohci@00600000 { status = "okay"; num-ports = <2>; - atmel,vbus-gpio = <&pioD 19 0 - &pioD 20 0 + atmel,vbus-gpio = <&pioD 19 1 + &pioD 20 1 >; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 3d0c32fb218f4682a1400b38fc00e51195f85752..c8042147eaa2d39cc7470dd3525063a0e45563a0 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -36,7 +36,7 @@ }; }; - memory@70000000 { + memory { reg = <0x70000000 0x10000000>; }; @@ -56,7 +56,6 @@ #interrupt-cells = <2>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; - interrupt-parent; reg = <0xfffff000 0x200>; }; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index c4c8ae4123d522d4f342f2ebc8ddff1e69126a05..a3633bd1311145168f36278afbed6dfe9e6bce76 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -17,7 +17,7 @@ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2"; }; - memory@70000000 { + memory { reg = <0x70000000 0x4000000>; }; @@ -73,8 +73,8 @@ usb0: ohci@00700000 { status = "okay"; num-ports = <2>; - atmel,vbus-gpio = <&pioD 1 0 - &pioD 3 0>; + atmel,vbus-gpio = <&pioD 1 1 + &pioD 3 1>; }; usb1: ehci@00800000 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index c111001f254ea1d414a510f6258c3c94831cf79a..dd4ed748469a2e576a84562fd212328b4716623e 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -34,7 +34,7 @@ }; }; - memory@20000000 { + memory { reg = <0x20000000 0x10000000>; }; @@ -54,7 +54,6 @@ #interrupt-cells = <2>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; - interrupt-parent; reg = <0xfffff000 0x200>; }; @@ -201,8 +200,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; - gpios = <&pioC 8 0 - &pioC 14 0 + gpios = <&pioD 5 0 + &pioD 4 0 0 >; status = "disabled"; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 67936f83c69450703528888710e9aaea1936c99d..31e7be23703d258a49b58a2afb05bb16e780fcff 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -8,7 +8,7 @@ */ / { - memory@20000000 { + memory { reg = <0x20000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi index d73dce6456679de2281c121225b677930ba85a83..14bc307050999d278cda3684b98da6577e6d6371 100644 --- a/arch/arm/boot/dts/db8500.dtsi +++ b/arch/arm/boot/dts/db8500.dtsi @@ -24,7 +24,6 @@ #interrupt-cells = <3>; #address-cells = <1>; interrupt-controller; - interrupt-parent; reg = <0xa0411000 0x1000>, <0xa0410100 0x100>; }; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 37c0ff9c8b90cb03f0ebb7fb2e1ce961ee4c141c..83e72294aefb1211c1bc3cdecab273750baa3294 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -89,7 +89,6 @@ #size-cells = <0>; #address-cells = <1>; interrupt-controller; - interrupt-parent; reg = <0xfff11000 0x1000>, <0xfff10100 0x100>; }; diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts index 15ded0deaa79aec744760a00b8f80e9f81fe4228..45bc4bb04e5745969184b9baa3e78e4d4c5402f3 100644 --- a/arch/arm/boot/dts/msm8660-surf.dts +++ b/arch/arm/boot/dts/msm8660-surf.dts @@ -10,7 +10,7 @@ intc: interrupt-controller@02080000 { compatible = "qcom,msm-8660-qgic"; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <3>; reg = < 0x02080000 0x1000 >, < 0x02081000 0x1000 >; }; @@ -19,6 +19,6 @@ compatible = "qcom,msm-hsuart", "qcom,msm-uart"; reg = <0x19c40000 0x1000>, <0x19c00000 0x1000>; - interrupts = <195>; + interrupts = <0 195 0x0>; }; }; diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts index 3b3c4e0fa79f8429df9efafc2a97942e997e3331..7c2399c532e52990b17f98c6ce48908f0e3b11c3 100644 --- a/arch/arm/boot/dts/usb_a9g20.dts +++ b/arch/arm/boot/dts/usb_a9g20.dts @@ -16,7 +16,7 @@ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; }; - memory@20000000 { + memory { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index 0b32925f21474fcb983716aed17205bd50ee10a3..e2fe3195c0d109c6a31853455171627724c2e2d8 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -173,7 +173,7 @@ mmc@5000 { compatible = "arm,primecell"; reg = < 0x5000 0x1000>; - interrupts = <22>; + interrupts = <22 34>; }; kmi@6000 { compatible = "arm,pl050", "arm,primecell"; diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts index 166461073b7893ec6dc49a60957bf8ef1d3e106f..7e8175269064d6f5dbf0a0b3bca1b933aa5efd9f 100644 --- a/arch/arm/boot/dts/versatile-pb.dts +++ b/arch/arm/boot/dts/versatile-pb.dts @@ -41,7 +41,7 @@ mmc@b000 { compatible = "arm,primecell"; reg = <0xb000 0x1000>; - interrupts = <23>; + interrupts = <23 34>; }; }; }; diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 7a66311f306666bf7c7ff07ffcbe4e501c93f236..7e288f96cedf01fa782b3326788d40305c551e0d 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -427,19 +427,18 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent) /* * Handle each interrupt in a single VIC. Returns non-zero if we've - * handled at least one interrupt. This does a single read of the - * status register and handles all interrupts in order from LSB first. + * handled at least one interrupt. This reads the status register + * before handling each interrupt, which is necessary given that + * handle_IRQ may briefly re-enable interrupts for soft IRQ handling. */ static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs) { u32 stat, irq; int handled = 0; - stat = readl_relaxed(vic->base + VIC_IRQ_STATUS); - while (stat) { + while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) { irq = ffs(stat) - 1; handle_IRQ(irq_find_mapping(vic->domain, irq), regs); - stat &= ~(1 << irq); handled = 1; } diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index b5ac644e12af9121985b0eadeecfdefaaf85c33b..6b31cb60daabd516579d55f1cb2b5a7198cb3776 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -112,6 +112,7 @@ CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y CONFIG_MFD_MC13XXX=y CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y CONFIG_FB=y diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 42da9183acc85509342b00bc14a458a6d5d6a267..082175c54e7cc7343a15c7d0f15f3ddbf5631c8a 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -14,6 +14,8 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_BLK_DEV_INTEGRITY=y CONFIG_ARCH_S3C24XX=y +# CONFIG_CPU_S3C2410 is not set +CONFIG_CPU_S3C2440=y CONFIG_S3C_ADC=y CONFIG_S3C24XX_PWM=y CONFIG_MACH_MINI2440=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 889d73ac1ae11e6870a7a345fb402b8e54ce8070..7e84f453e8a6f07e76c182badb2ee055eda1bde6 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -8,8 +8,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_U8500=y -CONFIG_UX500_SOC_DB5500=y -CONFIG_UX500_SOC_DB8500=y CONFIG_MACH_HREFV60=y CONFIG_MACH_SNOWBALL=y CONFIG_MACH_U5500=y @@ -39,7 +37,6 @@ CONFIG_CAIF=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_MISC_DEVICES=y CONFIG_AB8500_PWM=y CONFIG_SENSORS_BH1780=y CONFIG_NETDEVICES=y @@ -65,16 +62,18 @@ CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_NOMADIK=y -CONFIG_I2C=y -CONFIG_I2C_NOMADIK=y CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_TC3589X=y +CONFIG_POWER_SUPPLY=y +CONFIG_AB8500_BM=y +CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y CONFIG_AB5500_CORE=y CONFIG_AB8500_CORE=y +CONFIG_REGULATOR=y CONFIG_REGULATOR_AB8500=y # CONFIG_HID_SUPPORT is not set CONFIG_USB_GADGET=y diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h index 44f4a09ff37b6d095c61c9f264c43ba5ff53db84..05112380dc5398dd47cbd9fb6adf564f96a4c94c 100644 --- a/arch/arm/include/asm/barrier.h +++ b/arch/arm/include/asm/barrier.h @@ -2,6 +2,7 @@ #define __ASM_BARRIER_H #ifndef __ASSEMBLY__ +#include #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t"); @@ -39,7 +40,6 @@ #ifdef CONFIG_ARCH_HAS_BARRIERS #include #elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP) -#include #define mb() do { dsb(); outer_sync(); } while (0) #define rmb() dsb() #define wmb() mb() diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index df0ac0bb39aae43d6ebf92a7271c4ba7e536f151..9af5563dd3ebbc6be0f53448e107a05249cca859 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -119,7 +119,7 @@ static inline void __iomem *__typesafe_io(unsigned long addr) #ifdef CONFIG_NEED_MACH_IO_H #include #else -#define __io(a) ({ (void)(a); __typesafe_io(0); }) +#define __io(a) __typesafe_io((a) & IO_SPACE_LIMIT) #endif /* diff --git a/arch/arm/include/asm/jump_label.h b/arch/arm/include/asm/jump_label.h index 5c5ca2ea62b04753c49b6d64eb8d9ca9214049a5..bfc198c759130109d44b73b4506ea853d01fba28 100644 --- a/arch/arm/include/asm/jump_label.h +++ b/arch/arm/include/asm/jump_label.h @@ -14,7 +14,7 @@ #define JUMP_LABEL_NOP "nop" #endif -static __always_inline bool arch_static_branch(struct jump_label_key *key) +static __always_inline bool arch_static_branch(struct static_key *key) { asm goto("1:\n\t" JUMP_LABEL_NOP "\n\t" diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index d4c24d412a8ddbdaba9f11a6217cd6a8b592c22c..0f04d84582e1d81ef5448ee180d23b42c80a2eee 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -118,6 +118,13 @@ extern void iwmmxt_task_switch(struct thread_info *); extern void vfp_sync_hwstate(struct thread_info *); extern void vfp_flush_hwstate(struct thread_info *); +struct user_vfp; +struct user_vfp_exc; + +extern int vfp_preserve_user_clear_hwstate(struct user_vfp __user *, + struct user_vfp_exc __user *); +extern int vfp_restore_user_hwstate(struct user_vfp __user *, + struct user_vfp_exc __user *); #endif /* diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h index 60843eb0f61c3f9f9536d3ebaebc05b3cdfd2189..73409e6c0251001b5b03f27ae811a523cc605f62 100644 --- a/arch/arm/include/asm/tls.h +++ b/arch/arm/include/asm/tls.h @@ -7,6 +7,8 @@ .macro set_tls_v6k, tp, tmp1, tmp2 mcr p15, 0, \tp, c13, c0, 3 @ set TLS register + mov \tmp1, #0 + mcr p15, 0, \tmp1, c13, c0, 2 @ clear user r/w TLS register .endm .macro set_tls_v6, tp, tmp1, tmp2 @@ -15,6 +17,8 @@ mov \tmp2, #0xffff0fff tst \tmp1, #HWCAP_TLS @ hardware TLS available? mcrne p15, 0, \tp, c13, c0, 3 @ yes, set TLS register + movne \tmp1, #0 + mcrne p15, 0, \tmp1, c13, c0, 2 @ clear user r/w TLS register streq \tp, [\tmp2, #-15] @ set TLS value at 0xffff0ff0 .endm diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 632df9a66f8c1e989a3d369457579b5613c65aab..ede5f7741c42246984333a4398020015575ebaaa 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -299,7 +299,6 @@ static inline int pdev_bad_for_parity(struct pci_dev *dev) */ void pcibios_fixup_bus(struct pci_bus *bus) { - struct pci_sys_data *root = bus->sysdata; struct pci_dev *dev; u16 features = PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_FAST_BACK; diff --git a/arch/arm/kernel/insn.c b/arch/arm/kernel/insn.c index ab312e516546ac8fc0d25b7d0a352c18e613dfcd..b760340b70146123bd05dbc32e47d042f8d243d1 100644 --- a/arch/arm/kernel/insn.c +++ b/arch/arm/kernel/insn.c @@ -1,3 +1,4 @@ +#include #include #include diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 71ccdbfed66276f2c76db1b683da17cab392f0ad..8349d4e97e2b8b9b7bb5672b2cf974c2cdb74fd0 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -155,10 +155,10 @@ static bool migrate_one_irq(struct irq_desc *desc) } c = irq_data_get_irq_chip(d); - if (c->irq_set_affinity) - c->irq_set_affinity(d, affinity, true); - else + if (!c->irq_set_affinity) pr_debug("IRQ%u: unable to set affinity\n", d->irq); + else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret) + cpumask_copy(d->affinity, affinity); return ret; } diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c index ab1869dac97a96a6399964e088f1dc58ff6191e2..4dd41fc9e23572793ec384b28b77fb9d5ada63d8 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/kernel/kprobes.c @@ -152,7 +152,7 @@ int __kprobes __arch_disarm_kprobe(void *p) void __kprobes arch_disarm_kprobe(struct kprobe *p) { - stop_machine(__arch_disarm_kprobe, p, &cpu_online_map); + stop_machine(__arch_disarm_kprobe, p, cpu_online_mask); } void __kprobes arch_remove_kprobe(struct kprobe *p) diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 45956c9d0ef0d383dc60a41ba20be10256d029e8..9650c143afc115fe82c2ccd5fdecad6ef02116e0 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -256,7 +256,7 @@ static int ptrace_read_user(struct task_struct *tsk, unsigned long off, { unsigned long tmp; - if (off & 3 || off >= sizeof(struct user)) + if (off & 3) return -EIO; tmp = 0; @@ -268,6 +268,8 @@ static int ptrace_read_user(struct task_struct *tsk, unsigned long off, tmp = tsk->mm->end_code; else if (off < sizeof(struct pt_regs)) tmp = get_user_reg(tsk, off >> 2); + else if (off >= sizeof(struct user)) + return -EIO; return put_user(tmp, ret); } @@ -904,27 +906,14 @@ long arch_ptrace(struct task_struct *child, long request, return ret; } -#ifdef __ARMEB__ -#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB -#else -#define AUDIT_ARCH_NR AUDIT_ARCH_ARM -#endif - asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) { unsigned long ip; - /* - * Save IP. IP is used to denote syscall entry/exit: - * IP = 0 -> entry, = 1 -> exit - */ - ip = regs->ARM_ip; - regs->ARM_ip = why; - - if (!ip) + if (why) audit_syscall_exit(regs); else - audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0, + audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); if (!test_thread_flag(TIF_SYSCALL_TRACE)) @@ -934,6 +923,13 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) current_thread_info()->syscall = scno; + /* + * IP is used to denote syscall entry/exit: + * IP = 0 -> entry, =1 -> exit + */ + ip = regs->ARM_ip; + regs->ARM_ip = why; + /* the 0x80 provides a way for the tracing parent to distinguish between a syscall stop and SIGTRAP delivery */ ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index b91411371ae19b1ae75c2184b4b26ec6c9b06193..ebfac782593f048c9cf81a5619f0b3d24900ca8c 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -523,7 +523,21 @@ int __init arm_add_memory(phys_addr_t start, unsigned long size) */ size -= start & ~PAGE_MASK; bank->start = PAGE_ALIGN(start); - bank->size = size & PAGE_MASK; + +#ifndef CONFIG_LPAE + if (bank->start + size < bank->start) { + printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in " + "32-bit physical address space\n", (long long)start); + /* + * To ensure bank->start + bank->size is representable in + * 32 bits, we use ULONG_MAX as the upper limit rather than 4GB. + * This means we lose a page after masking. + */ + size = ULONG_MAX - bank->start; + } +#endif + + bank->size = size & PAGE_MASK; /* * Check whether this memory region has non-zero size or diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 7cb532fc8aa4e3a9dc1e9d63d4cb887a08b1fad1..d68d1b6946809831458d03d8a020ea32f571c62f 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -180,44 +180,23 @@ static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame) static int preserve_vfp_context(struct vfp_sigframe __user *frame) { - struct thread_info *thread = current_thread_info(); - struct vfp_hard_struct *h = &thread->vfpstate.hard; const unsigned long magic = VFP_MAGIC; const unsigned long size = VFP_STORAGE_SIZE; int err = 0; - vfp_sync_hwstate(thread); __put_user_error(magic, &frame->magic, err); __put_user_error(size, &frame->size, err); - /* - * Copy the floating point registers. There can be unused - * registers see asm/hwcap.h for details. - */ - err |= __copy_to_user(&frame->ufp.fpregs, &h->fpregs, - sizeof(h->fpregs)); - /* - * Copy the status and control register. - */ - __put_user_error(h->fpscr, &frame->ufp.fpscr, err); - - /* - * Copy the exception registers. - */ - __put_user_error(h->fpexc, &frame->ufp_exc.fpexc, err); - __put_user_error(h->fpinst, &frame->ufp_exc.fpinst, err); - __put_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err); + if (err) + return -EFAULT; - return err ? -EFAULT : 0; + return vfp_preserve_user_clear_hwstate(&frame->ufp, &frame->ufp_exc); } static int restore_vfp_context(struct vfp_sigframe __user *frame) { - struct thread_info *thread = current_thread_info(); - struct vfp_hard_struct *h = &thread->vfpstate.hard; unsigned long magic; unsigned long size; - unsigned long fpexc; int err = 0; __get_user_error(magic, &frame->magic, err); @@ -228,33 +207,7 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame) if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE) return -EINVAL; - vfp_flush_hwstate(thread); - - /* - * Copy the floating point registers. There can be unused - * registers see asm/hwcap.h for details. - */ - err |= __copy_from_user(&h->fpregs, &frame->ufp.fpregs, - sizeof(h->fpregs)); - /* - * Copy the status and control register. - */ - __get_user_error(h->fpscr, &frame->ufp.fpscr, err); - - /* - * Sanitise and restore the exception registers. - */ - __get_user_error(fpexc, &frame->ufp_exc.fpexc, err); - /* Ensure the VFP is enabled. */ - fpexc |= FPEXC_EN; - /* Ensure FPINST2 is invalid and the exception flag is cleared. */ - fpexc &= ~(FPEXC_EX | FPEXC_FP2V); - h->fpexc = fpexc; - - __get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err); - __get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err); - - return err ? -EFAULT : 0; + return vfp_restore_user_hwstate(&frame->ufp, &frame->ufp_exc); } #endif diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 2cee7d1eb958bc39b19b31f18447fe4c6119419a..8f4644659777ebbefd8ba2de8b366b8a5d7de8fa 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -251,8 +251,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void) struct mm_struct *mm = &init_mm; unsigned int cpu = smp_processor_id(); - printk("CPU%u: Booted secondary processor\n", cpu); - /* * All kernel threads share the same mm context; grab a * reference and switch to it. @@ -264,6 +262,8 @@ asmlinkage void __cpuinit secondary_start_kernel(void) enter_lazy_tlb(mm, current); local_flush_tlb_all(); + printk("CPU%u: Booted secondary processor\n", cpu); + cpu_init(); preempt_disable(); trace_hardirqs_off(); @@ -349,7 +349,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) * re-initialize the map in platform_smp_prepare_cpus() if * present != possible (e.g. physical hotplug). */ - init_cpu_present(&cpu_possible_map); + init_cpu_present(cpu_possible_mask); /* * Initialise the SCU if there are more than one CPU @@ -510,10 +510,6 @@ static void ipi_cpu_stop(unsigned int cpu) local_fiq_disable(); local_irq_disable(); -#ifdef CONFIG_HOTPLUG_CPU - platform_cpu_kill(cpu); -#endif - while (1) cpu_relax(); } @@ -576,16 +572,25 @@ void smp_send_reschedule(int cpu) smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE); } +#ifdef CONFIG_HOTPLUG_CPU +static void smp_kill_cpus(cpumask_t *mask) +{ + unsigned int cpu; + for_each_cpu(cpu, mask) + platform_cpu_kill(cpu); +} +#else +static void smp_kill_cpus(cpumask_t *mask) { } +#endif + void smp_send_stop(void) { unsigned long timeout; + struct cpumask mask; - if (num_online_cpus() > 1) { - cpumask_t mask = cpu_online_map; - cpu_clear(smp_processor_id(), mask); - - smp_cross_call(&mask, IPI_CPU_STOP); - } + cpumask_copy(&mask, cpu_online_mask); + cpumask_clear_cpu(smp_processor_id(), &mask); + smp_cross_call(&mask, IPI_CPU_STOP); /* Wait up to one second for other CPUs to stop */ timeout = USEC_PER_SEC; @@ -594,6 +599,8 @@ void smp_send_stop(void) if (num_online_cpus() > 1) pr_warning("SMP: failed to stop secondary CPUs\n"); + + smp_kill_cpus(&mask); } /* diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c index d2b177905cdb4c46def1de346ec7296425e1e315..76cbb055dd05ee2e8620bc1a3f1dc322f1333aeb 100644 --- a/arch/arm/kernel/sys_arm.c +++ b/arch/arm/kernel/sys_arm.c @@ -115,7 +115,7 @@ int kernel_execve(const char *filename, "Ir" (THREAD_START_SP - sizeof(regs)), "r" (®s), "Ir" (sizeof(regs)) - : "r0", "r1", "r2", "r3", "ip", "lr", "memory"); + : "r0", "r1", "r2", "r3", "r8", "r9", "ip", "lr", "memory"); out: return ret; diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 99ce5c955e39d94d24f50005b875459739ef6ce5..05774e5b1cbaf32488a142b4060a1adc452c8177 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -1173,7 +1173,6 @@ void __init at91_add_device_serial(void) printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else -void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index dd7f782b0b91731202c3d8e10f02597b7d89518c..104ca40d8d18908cb463e7ae1cd56790c926d971 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -23,6 +23,7 @@ #include #include #include +#include #include @@ -176,6 +177,7 @@ static struct clock_event_device clkevt = { }; void __iomem *at91_st_base; +EXPORT_SYMBOL_GPL(at91_st_base); void __init at91rm9200_ioremap_st(u32 addr) { diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 7e5651ee9f859f9689b76f07ca5bc834d3aa871a..5652dde4bbe291fd5723481ab9a978eb66bd5ec9 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -598,6 +598,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) else cs_pin = spi1_standard_cs[devices[i].chip_select]; + if (!gpio_is_valid(cs_pin)) + continue; + if (devices[i].bus_num == 0) enable_spi0 = 1; else diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 096da87dc00d41359fa793f6dd25f541516dd86c..4db961a93085566e80973e241f910223484ccd96 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -415,6 +415,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) else cs_pin = spi1_standard_cs[devices[i].chip_select]; + if (!gpio_is_valid(cs_pin)) + continue; + if (devices[i].bus_num == 0) enable_spi0 = 1; else diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 53688c46f95652f02fced22b9d1979cd6799df1b..fe99206de8802b549dc099b65f3daa62a53f5768 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -72,7 +72,8 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable VBus control for UHP ports */ for (i = 0; i < data->ports; i++) { if (gpio_is_valid(data->vbus_pin[i])) - at91_set_gpio_output(data->vbus_pin[i], 0); + at91_set_gpio_output(data->vbus_pin[i], + data->vbus_pin_active_low[i]); } /* Enable overcurrent notification */ @@ -671,6 +672,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) else cs_pin = spi1_standard_cs[devices[i].chip_select]; + if (!gpio_is_valid(cs_pin)) + continue; + if (devices[i].bus_num == 0) enable_spi0 = 1; else diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 698479f1e197cf5725139bf135eb0c89f0d5d715..6b008aee1dffad648874e6318e397d7d640e2d31 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -127,12 +127,13 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) /* Enable VBus control for UHP ports */ for (i = 0; i < data->ports; i++) { if (gpio_is_valid(data->vbus_pin[i])) - at91_set_gpio_output(data->vbus_pin[i], 0); + at91_set_gpio_output(data->vbus_pin[i], + data->vbus_pin_active_low[i]); } /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } @@ -188,7 +189,8 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) /* Enable VBus control for UHP ports */ for (i = 0; i < data->ports; i++) { if (gpio_is_valid(data->vbus_pin[i])) - at91_set_gpio_output(data->vbus_pin[i], 0); + at91_set_gpio_output(data->vbus_pin[i], + data->vbus_pin_active_low[i]); } usbh_ehci_data = *data; @@ -785,6 +787,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) else cs_pin = spi1_standard_cs[devices[i].chip_select]; + if (!gpio_is_valid(cs_pin)) + continue; + if (devices[i].bus_num == 0) enable_spi0 = 1; else diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index eda72e83037dc7dd176c859e7f4ad874a9506a75..fe4ae22e8561bc9084b9d64870d063cfca88ed9a 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -419,6 +419,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) else cs_pin = spi_standard_cs[devices[i].chip_select]; + if (!gpio_is_valid(cs_pin)) + continue; + /* enable chip-select pin */ at91_set_gpio_output(cs_pin, 1); diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index b6831eeb7b767c92d8abcc1343ef6b8b47656ca9..13c8cae6046253c0a24fcafaedef1b2797cbc122 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -223,6 +223,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk), CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk), + CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk), + CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk), CLKDEV_CON_ID("pioA", &pioAB_clk), CLKDEV_CON_ID("pioB", &pioAB_clk), CLKDEV_CON_ID("pioC", &pioCD_clk), diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 11cbaa8946fe0e269877104aac08da9fe03818e9..b2e4fe21f346cf6217dfb78b5e8b3f6553e76fe6 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -117,7 +117,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = { }; #define EK_FLASH_BASE AT91_CHIPSELECT_0 -#define EK_FLASH_SIZE SZ_2M +#define EK_FLASH_SIZE SZ_8M static struct physmap_flash_data ek_flash_data = { .width = 2, diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index c3f9944628642050c34c0a5f31388854511921e4..065fed342424902bbe15aa67101fd524397eaa7b 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -85,8 +85,6 @@ static struct resource dm9000_resource[] = { .flags = IORESOURCE_MEM }, [2] = { - .start = AT91_PIN_PC11, - .end = AT91_PIN_PC11, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE, } @@ -130,6 +128,8 @@ static struct sam9_smc_config __initdata dm9000_smc_config = { static void __init ek_add_device_dm9000(void) { + struct resource *r = &dm9000_resource[2]; + /* Configure chip-select 2 (DM9000) */ sam9_smc_configure(0, 2, &dm9000_smc_config); @@ -139,6 +139,7 @@ static void __init ek_add_device_dm9000(void) /* Configure Interrupt pin as input, no pull-up */ at91_set_gpio_input(AT91_PIN_PC11, 0); + r->start = r->end = gpio_to_irq(AT91_PIN_PC11); platform_device_register(&dm9000_device); } #else diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 66f0ddf4b2ae416102626e02514a660576164d22..2ffe50f3a9e9e056a48879dd4c6a755cfa65f622 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -74,6 +74,7 @@ static void __init ek_init_early(void) static struct at91_usbh_data __initdata ek_usbh_data = { .ports = 2, .vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 }, + .vbus_pin_active_low = {1, 1}, .overcurrent_pin= {-EINVAL, -EINVAL}, }; diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index e1bea73e6b30bb3e0c3c9f192a42c9eeb0b0da0c..c88e908ddd82e9de014b360448a194c568f27154 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -71,6 +71,7 @@ static void __init ek_init_early(void) static struct at91_usbh_data __initdata ek_usbh_hs_data = { .ports = 2, .vbus_pin = {AT91_PIN_PD1, AT91_PIN_PD3}, + .vbus_pin_active_low = {1, 1}, .overcurrent_pin= {-EINVAL, -EINVAL}, }; diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index a0f4d7424cdcf4cfbebbc0c81185fb615862e9b5..6b692824c9885555fffe031ead3bafcdf71d141d 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -35,6 +35,7 @@ #include "generic.h" void __iomem *at91_pmc_base; +EXPORT_SYMBOL_GPL(at91_pmc_base); /* * There's a lot more which can be done with clocks, including cpufreq diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 36604782a78f0e52d4bed0d6af21c787dacf418f..ea2c57a86ca6ebf389aaa406bffeb5441e65a067 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -25,7 +25,7 @@ extern void __iomem *at91_pmc_base; #define at91_pmc_write(field, value) \ __raw_writel(value, at91_pmc_base + field) #else -.extern at91_aic_base +.extern at91_pmc_base #endif #define AT91_PMC_SCER 0x00 /* System Clock Enable Register */ diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 544a5d5ce4165e9117f8a7ab1cdcbaea79b2df22..49a821192c652c959321b834953d7f3ce2073452 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -86,14 +86,15 @@ extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *d extern void __init at91_add_device_eth(struct macb_platform_data *data); /* USB Host */ +#define AT91_MAX_USBH_PORTS 3 struct at91_usbh_data { - u8 ports; /* number of ports on root hub */ - int vbus_pin[2]; /* port power-control pin */ - u8 vbus_pin_active_low[2]; + int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */ + int overcurrent_pin[AT91_MAX_USBH_PORTS]; + u8 ports; /* number of ports on root hub */ u8 overcurrent_supported; - int overcurrent_pin[2]; - u8 overcurrent_status[2]; - u8 overcurrent_changed[2]; + u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS]; + u8 overcurrent_status[AT91_MAX_USBH_PORTS]; + u8 overcurrent_changed[AT91_MAX_USBH_PORTS]; }; extern void __init at91_add_device_usbh(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data); diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h new file mode 100644 index 0000000000000000000000000000000000000000..2d9ca0455745524d50ec1417ec0d36596b05bea9 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/io.h @@ -0,0 +1,27 @@ +/* + * arch/arm/mach-at91/include/mach/io.h + * + * Copyright (C) 2003 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xFFFFFFFF +#define __io(a) __typesafe_io(a) + +#endif diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 97cc04dc807302d635e9fe56176d34e0d9210c4f..f44a2e7272e33f8e8568c4bc597db0bc0b38f5b5 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -54,6 +54,7 @@ void __init at91_init_interrupts(unsigned int *priority) } void __iomem *at91_ramc_base[2]; +EXPORT_SYMBOL_GPL(at91_ramc_base); void __init at91_ioremap_ramc(int id, u32 addr, u32 size) { @@ -292,6 +293,7 @@ void __init at91_ioremap_rstc(u32 base_addr) } void __iomem *at91_matrix_base; +EXPORT_SYMBOL_GPL(at91_matrix_base); void __init at91_ioremap_matrix(u32 base_addr) { diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index 22e4e0a28ad1eae0e549f43e47e548b9a36945dd..adbfb1994582ee1352a511501279f5b58c378bfc 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -52,8 +52,8 @@ #include #include -static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL); -static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL); +static AMBA_APB_DEVICE(uartA, "uartA", 0, MM_ADDR_IO_UARTA, {IRQ_UARTA}, NULL); +static AMBA_APB_DEVICE(uartB, "uartB", 0, MM_ADDR_IO_UARTB, {IRQ_UARTB}, NULL); static struct clk pll1_clk = { .name = "PLL1", diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 0491ceef1cda8a77bbaf60409416d906fc701620..b8df521fb68ec83c077681b2fc8cf155de55758f 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -232,6 +232,9 @@ config MACH_ARMLEX4210 config MACH_UNIVERSAL_C210 bool "Mobile UNIVERSAL_C210 Board" select CPU_EXYNOS4210 + select S5P_HRT + select CLKSRC_MMIO + select HAVE_SCHED_CLOCK select S5P_GPIO_INT select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 @@ -368,6 +371,7 @@ comment "Flattened Device Tree based board for EXYNOS SoCs" config MACH_EXYNOS4_DT bool "Samsung Exynos4 Machine using device tree" + depends on ARCH_EXYNOS4 select CPU_EXYNOS4210 select USE_OF select ARM_AMBA @@ -380,6 +384,7 @@ config MACH_EXYNOS4_DT config MACH_EXYNOS5_DT bool "SAMSUNG EXYNOS5 Machine using device tree" + depends on ARCH_EXYNOS5 select SOC_EXYNOS5250 select USE_OF select ARM_AMBA diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c index df54c2a922252826b6b2f837134da025ca2a6994..6efd1e5919fdebcd389e61cf48e25b1967a75bb1 100644 --- a/arch/arm/mach-exynos/clock-exynos4.c +++ b/arch/arm/mach-exynos/clock-exynos4.c @@ -497,25 +497,25 @@ static struct clk exynos4_init_clocks_off[] = { .ctrlbit = (1 << 3), }, { .name = "hsmmc", - .devname = "s3c-sdhci.0", + .devname = "exynos4-sdhci.0", .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 5), }, { .name = "hsmmc", - .devname = "s3c-sdhci.1", + .devname = "exynos4-sdhci.1", .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 6), }, { .name = "hsmmc", - .devname = "s3c-sdhci.2", + .devname = "exynos4-sdhci.2", .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 7), }, { .name = "hsmmc", - .devname = "s3c-sdhci.3", + .devname = "exynos4-sdhci.3", .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 8), @@ -1202,7 +1202,7 @@ static struct clksrc_clk exynos4_clk_sclk_uart3 = { static struct clksrc_clk exynos4_clk_sclk_mmc0 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.0", + .devname = "exynos4-sdhci.0", .parent = &exynos4_clk_dout_mmc0.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 0), @@ -1213,7 +1213,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc0 = { static struct clksrc_clk exynos4_clk_sclk_mmc1 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.1", + .devname = "exynos4-sdhci.1", .parent = &exynos4_clk_dout_mmc1.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 4), @@ -1224,7 +1224,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc1 = { static struct clksrc_clk exynos4_clk_sclk_mmc2 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.2", + .devname = "exynos4-sdhci.2", .parent = &exynos4_clk_dout_mmc2.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 8), @@ -1235,7 +1235,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc2 = { static struct clksrc_clk exynos4_clk_sclk_mmc3 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.3", + .devname = "exynos4-sdhci.3", .parent = &exynos4_clk_dout_mmc3.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 12), @@ -1340,10 +1340,10 @@ static struct clk_lookup exynos4_clk_lookup[] = { CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk), CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk), CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk), - CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk), + CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk), + CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk), + CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk), + CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk), CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0), CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0), CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1), diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c index d013982d0f8e1bc9e49a80824069c7214dec36be..7ac6ff4c46bd382839234a3d8a19ffb2042e311b 100644 --- a/arch/arm/mach-exynos/clock-exynos5.c +++ b/arch/arm/mach-exynos/clock-exynos5.c @@ -455,25 +455,25 @@ static struct clk exynos5_init_clocks_off[] = { .ctrlbit = (1 << 20), }, { .name = "hsmmc", - .devname = "s3c-sdhci.0", + .devname = "exynos4-sdhci.0", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 12), }, { .name = "hsmmc", - .devname = "s3c-sdhci.1", + .devname = "exynos4-sdhci.1", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 13), }, { .name = "hsmmc", - .devname = "s3c-sdhci.2", + .devname = "exynos4-sdhci.2", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 14), }, { .name = "hsmmc", - .devname = "s3c-sdhci.3", + .devname = "exynos4-sdhci.3", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 15), @@ -678,7 +678,7 @@ static struct clk exynos5_clk_pdma1 = { .name = "dma", .devname = "dma-pl330.1", .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 1), + .ctrlbit = (1 << 2), }; static struct clk exynos5_clk_mdma1 = { @@ -813,7 +813,7 @@ static struct clksrc_clk exynos5_clk_sclk_uart3 = { static struct clksrc_clk exynos5_clk_sclk_mmc0 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.0", + .devname = "exynos4-sdhci.0", .parent = &exynos5_clk_dout_mmc0.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 0), @@ -824,7 +824,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc0 = { static struct clksrc_clk exynos5_clk_sclk_mmc1 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.1", + .devname = "exynos4-sdhci.1", .parent = &exynos5_clk_dout_mmc1.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 4), @@ -835,7 +835,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc1 = { static struct clksrc_clk exynos5_clk_sclk_mmc2 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.2", + .devname = "exynos4-sdhci.2", .parent = &exynos5_clk_dout_mmc2.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 8), @@ -846,7 +846,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc2 = { static struct clksrc_clk exynos5_clk_sclk_mmc3 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.3", + .devname = "exynos4-sdhci.3", .parent = &exynos5_clk_dout_mmc3.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 12), @@ -990,10 +990,10 @@ static struct clk_lookup exynos5_clk_lookup[] = { CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk), CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk), CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk), - CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk), + CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk), + CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk), + CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk), + CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk), CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0), CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1), CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1), diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index e6cc50e94a58f86cff1e5d60cc1fc9fd5d1eebeb..5ccd6e80a607fec8750409d6d5731dfa92f2a73e 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -326,6 +326,11 @@ static void __init exynos4_map_io(void) s3c_fimc_setname(2, "exynos4-fimc"); s3c_fimc_setname(3, "exynos4-fimc"); + s3c_sdhci_setname(0, "exynos4-sdhci"); + s3c_sdhci_setname(1, "exynos4-sdhci"); + s3c_sdhci_setname(2, "exynos4-sdhci"); + s3c_sdhci_setname(3, "exynos4-sdhci"); + /* The I2C bus controllers are directly compatible with s3c2440 */ s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); @@ -344,6 +349,11 @@ static void __init exynos5_map_io(void) s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC; s3c_device_i2c0.resource[1].end = EXYNOS5_IRQ_IIC; + s3c_sdhci_setname(0, "exynos4-sdhci"); + s3c_sdhci_setname(1, "exynos4-sdhci"); + s3c_sdhci_setname(2, "exynos4-sdhci"); + s3c_sdhci_setname(3, "exynos4-sdhci"); + /* The I2C bus controllers are directly compatible with s3c2440 */ s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); @@ -537,7 +547,9 @@ void __init exynos5_init_irq(void) { int irq; - gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); +#ifdef CONFIG_OF + of_irq_init(exynos4_dt_irq_match); +#endif for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) { combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq), @@ -583,10 +595,11 @@ core_initcall(exynos_core_init); #ifdef CONFIG_CACHE_L2X0 static int __init exynos4_l2x0_cache_init(void) { + int ret; + if (soc_is_exynos5250()) return 0; - int ret; ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK); if (!ret) { l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); diff --git a/arch/arm/mach-exynos/dev-dwmci.c b/arch/arm/mach-exynos/dev-dwmci.c index b025db4bf602380e465402381a270668ece4b41f..79035018fb746da2a5c0a284bbc2b229d3cebbe9 100644 --- a/arch/arm/mach-exynos/dev-dwmci.c +++ b/arch/arm/mach-exynos/dev-dwmci.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -33,16 +34,8 @@ static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data) } static struct resource exynos4_dwmci_resource[] = { - [0] = { - .start = EXYNOS4_PA_DWMCI, - .end = EXYNOS4_PA_DWMCI + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_DWMCI, - .end = IRQ_DWMCI, - .flags = IORESOURCE_IRQ, - } + [0] = DEFINE_RES_MEM(EXYNOS4_PA_DWMCI, SZ_4K), + [1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_DWMCI), }; static struct dw_mci_board exynos4_dwci_pdata = { diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c index 3983abee4264fb629b0dc16c083307703e71085b..69aaa45032057d8409e890b90ff6a6c1bd0b106c 100644 --- a/arch/arm/mach-exynos/dma.c +++ b/arch/arm/mach-exynos/dma.c @@ -35,8 +35,6 @@ #include #include -static u64 dma_dmamask = DMA_BIT_MASK(32); - static u8 exynos4210_pdma0_peri[] = { DMACH_PCM0_RX, DMACH_PCM0_TX, diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/mach-exynos/include/mach/debug-macro.S index 6c857ff0b5d84670f65287230801a7bf2cf5d974..e0c86ea475e7bccd6f1e7b598fe6da69b78abc0f 100644 --- a/arch/arm/mach-exynos/include/mach/debug-macro.S +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S @@ -21,10 +21,9 @@ */ .macro addruart, rp, rv, tmp - mov \rp, #0x10000000 - ldr \rp, [\rp, #0x0] - and \rp, \rp, #0xf00000 - teq \rp, #0x500000 @@ EXYNOS5 + mrc p15, 0, \tmp, c0, c0, 0 + and \tmp, \tmp, #0xf0 + teq \tmp, #0xf0 @@ A15 ldreq \rp, =EXYNOS5_PA_UART movne \rp, #EXYNOS4_PA_UART @@ EXYNOS4 ldr \rv, =S3C_VA_UART diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index 9bee8535d9e0aa994960de244002b198975a8709..591e78521a9f11f6de5114c8f717933efe4c9fd7 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -212,6 +212,8 @@ #define IRQ_MFC EXYNOS4_IRQ_MFC #define IRQ_SDO EXYNOS4_IRQ_SDO +#define IRQ_I2S0 EXYNOS4_IRQ_I2S0 + #define IRQ_ADC EXYNOS4_IRQ_ADC0 #define IRQ_TC EXYNOS4_IRQ_PEN0 diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 024d38ff17183fed96447aebcbeb27f1cc04fb62..6e6d11ff352a30b131db307b8d2910c9c0c6282b 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -89,6 +89,10 @@ #define EXYNOS4_PA_MDMA1 0x12840000 #define EXYNOS4_PA_PDMA0 0x12680000 #define EXYNOS4_PA_PDMA1 0x12690000 +#define EXYNOS5_PA_MDMA0 0x10800000 +#define EXYNOS5_PA_MDMA1 0x11C10000 +#define EXYNOS5_PA_PDMA0 0x121A0000 +#define EXYNOS5_PA_PDMA1 0x121B0000 #define EXYNOS4_PA_SYSMMU_MDMA 0x10A40000 #define EXYNOS4_PA_SYSMMU_SSS 0x10A50000 diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h index e141c1fd68d84ce00a4dcca450c2e904867709f7..d9578a58ae7f573b35d7065609ae4d090884acbf 100644 --- a/arch/arm/mach-exynos/include/mach/regs-clock.h +++ b/arch/arm/mach-exynos/include/mach/regs-clock.h @@ -255,9 +255,15 @@ /* For EXYNOS5250 */ +#define EXYNOS5_APLL_LOCK EXYNOS_CLKREG(0x00000) #define EXYNOS5_APLL_CON0 EXYNOS_CLKREG(0x00100) #define EXYNOS5_CLKSRC_CPU EXYNOS_CLKREG(0x00200) +#define EXYNOS5_CLKMUX_STATCPU EXYNOS_CLKREG(0x00400) #define EXYNOS5_CLKDIV_CPU0 EXYNOS_CLKREG(0x00500) +#define EXYNOS5_CLKDIV_CPU1 EXYNOS_CLKREG(0x00504) +#define EXYNOS5_CLKDIV_STATCPU0 EXYNOS_CLKREG(0x00600) +#define EXYNOS5_CLKDIV_STATCPU1 EXYNOS_CLKREG(0x00604) + #define EXYNOS5_MPLL_CON0 EXYNOS_CLKREG(0x04100) #define EXYNOS5_CLKSRC_CORE1 EXYNOS_CLKREG(0x04204) diff --git a/arch/arm/mach-exynos/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h index 493f4f365ddfe65a8ceab62908bc2ff6725a1ef1..2979995d5a6ad8ba92cf7e142a10e69676a28a8c 100644 --- a/arch/arm/mach-exynos/include/mach/uncompress.h +++ b/arch/arm/mach-exynos/include/mach/uncompress.h @@ -20,9 +20,24 @@ volatile u8 *uart_base; #include +static unsigned int __raw_readl(unsigned int ptr) +{ + return *((volatile unsigned int *)ptr); +} + static void arch_detect_cpu(void) { - if (machine_is_smdk5250()) + u32 chip_id = __raw_readl(EXYNOS_PA_CHIPID); + + /* + * product_id is bits 31:12 + * bits 23:20 describe the exynosX family + * + */ + chip_id >>= 20; + chip_id &= 0xf; + + if (chip_id == 0x5) uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT); else uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT); diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index 0d26f50081ad9e44e0d5cd3a9e962c391b3382f4..4711c8920e37830d7bda8cb32ee03ed1ae70730a 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -45,7 +45,7 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { "exynos4210-uart.3", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL), - OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.2", NULL), + OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL), {}, }; diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index b3982c867c9c5e9243c505d41b9914b69c130b30..ed90aef404c3175259e4a4ba576e60a6bb018a3f 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -112,6 +112,7 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = { .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | MMC_CAP_ERASE), + .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; @@ -307,49 +308,7 @@ static struct i2c_board_info i2c1_devs[] __initdata = { }; /* TSP */ -static u8 mxt_init_vals[] = { - /* MXT_GEN_COMMAND(6) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_GEN_POWER(7) */ - 0x20, 0xff, 0x32, - /* MXT_GEN_ACQUIRE(8) */ - 0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23, - /* MXT_TOUCH_MULTI(9) */ - 0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00, - 0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, - /* MXT_TOUCH_KEYARRAY(15) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, - 0x00, - /* MXT_SPT_GPIOPWM(19) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_PROCI_GRIPFACE(20) */ - 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04, - 0x0f, 0x0a, - /* MXT_PROCG_NOISE(22) */ - 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00, - 0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03, - /* MXT_TOUCH_PROXIMITY(23) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_PROCI_ONETOUCH(24) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_SPT_SELFTEST(25) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, - /* MXT_PROCI_TWOTOUCH(27) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_SPT_CTECONFIG(28) */ - 0x00, 0x00, 0x02, 0x08, 0x10, 0x00, -}; - static struct mxt_platform_data mxt_platform_data = { - .config = mxt_init_vals, - .config_length = ARRAY_SIZE(mxt_init_vals), - .x_line = 18, .y_line = 11, .x_size = 1024, @@ -571,7 +530,7 @@ static struct regulator_init_data __initdata max8997_ldo7_data = { static struct regulator_init_data __initdata max8997_ldo8_data = { .constraints = { - .name = "VUSB/VDAC_3.3V_C210", + .name = "VUSB+VDAC_3.3V_C210", .min_uV = 3300000, .max_uV = 3300000, .valid_ops_mask = REGULATOR_CHANGE_STATUS, @@ -1347,6 +1306,7 @@ static struct platform_device *nuri_devices[] __initdata = { static void __init nuri_map_io(void) { + clk_xusbxti.rate = 24000000; exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs)); @@ -1379,7 +1339,6 @@ static void __init nuri_machine_init(void) nuri_camera_init(); nuri_ehci_init(); - clk_xusbxti.rate = 24000000; /* Last */ platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices)); diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 6bb9dbdd73fdde842bcad0cb75f4713316c4a760..a34036eb8ba26942d9859f9e574013c355e510c4 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -29,6 +29,7 @@ #include #include +#include #include #include #include @@ -39,6 +40,7 @@ #include #include #include +#include #include #include @@ -746,6 +748,7 @@ static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { .max_width = 8, .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), + .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; @@ -1057,9 +1060,11 @@ static struct platform_device *universal_devices[] __initdata = { static void __init universal_map_io(void) { + clk_xusbxti.rate = 24000000; exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); + s5p_set_timer_source(S5P_PWM2, S5P_PWM4); } static void s5p_tv_setup(void) @@ -1110,7 +1115,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") .map_io = universal_map_io, .handle_irq = gic_handle_irq, .init_machine = universal_machine_init, - .timer = &exynos4_timer, + .timer = &s5p_timer, .reserve = &universal_reserve, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 7561eca131b0ba989c42afb1a5ec94fbce98f688..472d47b50cd60cbb2eced1f99117e3b761c6fc87 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -151,6 +151,7 @@ config MACH_MX25_3DS select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMXDI_RTC select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART @@ -493,6 +494,7 @@ config MACH_MX31MOBOARD select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c index b9a95ed75553a73e4fcea686bf8f38a1e3216081..98e04f5a87ddd2320c9a1392a96ab05347a114f4 100644 --- a/arch/arm/mach-imx/clock-imx27.c +++ b/arch/arm/mach-imx/clock-imx27.c @@ -662,6 +662,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "dma", dma_clk) _REGISTER_CLOCK(NULL, "rtic", rtic_clk) _REGISTER_CLOCK(NULL, "brom", brom_clk) + _REGISTER_CLOCK(NULL, "emma", emma_clk) _REGISTER_CLOCK("m2m-emmaprp.0", NULL, emma_clk) _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk) _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk) diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c index 1e279af656ad034dc46abf13c836077f0c754eca..e56c1a83eee3eafa38fdf1fbd02434484d5124de 100644 --- a/arch/arm/mach-imx/clock-imx35.c +++ b/arch/arm/mach-imx/clock-imx35.c @@ -483,7 +483,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "max", max_clk) _REGISTER_CLOCK(NULL, "audmux", audmux_clk) - _REGISTER_CLOCK(NULL, "csi", csi_clk) + _REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk) _REGISTER_CLOCK(NULL, "iim", iim_clk) _REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk) _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index 861ceb8232d60ca468cb361a749e34574bdb7961..ed38d03c61f22296acb782e7e4cc9c8dfde20344 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -35,7 +35,7 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = { static int __init imx27_avic_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - irq_domain_add_simple(np, 0); + irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL); return 0; } @@ -44,7 +44,9 @@ static int __init imx27_gpio_add_irq_domain(struct device_node *np, { static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; - irq_domain_add_simple(np, gpio_irq_base); + gpio_irq_base -= 32; + irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, + NULL); return 0; } diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index 27bc27e6ea4124a7163f34600c6bf8dacfbbd2c6..c650145d1646e6dbdfbe65ec4c96c7c56d611cd5 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -38,6 +38,8 @@ #include #include #include +#include +#include #include #include @@ -479,6 +481,11 @@ static struct platform_device *devices[] __initdata = { &armadillo5x0_smc911x_device, }; +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + /* * Perform board specific initializations */ @@ -489,6 +496,8 @@ static void __init armadillo5x0_init(void) mxc_iomux_setup_multiple_pins(armadillo5x0_pins, ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0"); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + platform_add_devices(devices, ARRAY_SIZE(devices)); imx_add_gpio_keys(&armadillo5x0_button_data); imx31_add_imx_i2c1(NULL); diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index fc78e8071cd178de28ada44104b9faf182b5bdf9..15a26e90826032d987775a16223e5e49e023b864 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -24,6 +24,8 @@ #include #include #include +#include +#include #include #include @@ -166,6 +168,11 @@ static struct platform_device kzm_smsc9118_device = { }, }; +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + static int __init kzm_init_smsc9118(void) { /* @@ -175,6 +182,8 @@ static int __init kzm_init_smsc9118(void) gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int"); gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2)); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_device_register(&kzm_smsc9118_device); } #else diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 4d1aab154400fb43e4e0de2ea38e49c932d278e0..4eafdf275ea28864d6dacf6667be7221cf2a9a22 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -156,6 +156,11 @@ static int mx31_3ds_pins[] = { MX31_PIN_CSI_VSYNC__CSI_VSYNC, MX31_PIN_CSI_D5__GPIO3_5, /* CMOS PWDN */ IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_GPIO), /* CMOS reset */ + /* SSI */ + MX31_PIN_STXD4__STXD4, + MX31_PIN_SRXD4__SRXD4, + MX31_PIN_SCK4__SCK4, + MX31_PIN_SFS4__SFS4, }; /* @@ -488,12 +493,23 @@ static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = { }; /* MC13783 */ +static struct mc13xxx_codec_platform_data mx31_3ds_codec = { + .dac_ssi_port = MC13783_SSI1_PORT, + .adc_ssi_port = MC13783_SSI1_PORT, +}; + static struct mc13xxx_platform_data mc13783_pdata = { .regulators = { .regulators = mx31_3ds_regulators, .num_regulators = ARRAY_SIZE(mx31_3ds_regulators), }, - .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC, + .codec = &mx31_3ds_codec, + .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC | MC13XXX_USE_CODEC, + +}; + +static struct imx_ssi_platform_data mx31_3ds_ssi_pdata = { + .flags = IMX_SSI_DMA | IMX_SSI_NET, }; /* SPI */ @@ -741,6 +757,10 @@ static void __init mx31_3ds_init(void) } mx31_3ds_init_camera(); + + imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata); + + imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0); } static void __init mx31_3ds_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 02401bbd6d53e7ef014507f2029212fb74f34b1d..83714b0cc290a25202e1e5122f3490ea426339c7 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -34,6 +34,8 @@ #include #include #include +#include +#include #include #include @@ -242,6 +244,11 @@ static struct platform_device *devices[] __initdata = { static int mx31lilly_baseboard; core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444); +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + static void __init mx31lilly_board_init(void) { imx31_soc_init(); @@ -280,6 +287,8 @@ static void __init mx31lilly_board_init(void) imx31_add_spi_imx1(&spi1_pdata); spi_register_board_info(&mc13783_dev, 1); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + platform_add_devices(devices, ARRAY_SIZE(devices)); /* USB */ diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index ef80751712e70ca0165c7fa817f41f1f92c39589..0abef5f13df5089798401a91c1d4b3d0b8696844 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -29,6 +29,8 @@ #include #include #include +#include +#include #include #include @@ -226,6 +228,11 @@ void __init mx31lite_map_io(void) static int mx31lite_baseboard; core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444); +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + static void __init mx31lite_init(void) { int ret; @@ -259,6 +266,8 @@ static void __init mx31lite_init(void) if (usbh2_pdata.otg) imx31_add_mxc_ehci_hs(2, &usbh2_pdata); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + /* SMSC9117 IRQ pin */ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq"); if (ret) diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index f17a15f28316519a1dd01f793742ca1293286df2..31e5b3d5da7392041e2b236c7c2974370f5d81aa 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -47,6 +47,7 @@ #include #include #include +#include #include "devices-imx31.h" @@ -102,6 +103,9 @@ static unsigned int moboard_pins[] = { MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO, MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY, MX31_PIN_CSPI2_SS1__CSPI3_SS1, + /* SSI */ + MX31_PIN_STXD4__STXD4, MX31_PIN_SRXD4__SRXD4, + MX31_PIN_SCK4__SCK4, MX31_PIN_SFS4__SFS4, }; static struct physmap_flash_data mx31moboard_flash_data = { @@ -276,6 +280,11 @@ static struct mc13xxx_buttons_platform_data moboard_buttons = { .b1on_key = KEY_POWER, }; +static struct mc13xxx_codec_platform_data moboard_codec = { + .dac_ssi_port = MC13783_SSI1_PORT, + .adc_ssi_port = MC13783_SSI1_PORT, +}; + static struct mc13xxx_platform_data moboard_pmic = { .regulators = { .regulators = moboard_regulators, @@ -283,7 +292,12 @@ static struct mc13xxx_platform_data moboard_pmic = { }, .leds = &moboard_leds, .buttons = &moboard_buttons, - .flags = MC13XXX_USE_RTC | MC13XXX_USE_ADC, + .codec = &moboard_codec, + .flags = MC13XXX_USE_RTC | MC13XXX_USE_ADC | MC13XXX_USE_CODEC, +}; + +static struct imx_ssi_platform_data moboard_ssi_pdata = { + .flags = IMX_SSI_DMA | IMX_SSI_NET, }; static struct spi_board_info moboard_spi_board_info[] __initdata = { @@ -554,6 +568,10 @@ static void __init mx31moboard_init(void) moboard_usbh2_init(); + imx31_add_imx_ssi(0, &moboard_ssi_pdata); + + imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0); + pm_power_off = mx31moboard_poweroff; switch (mx31moboard_baseboard) { diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index e14291d89e4fda86ec6c885a902e467ad53ad401..6ae51c6b95b7c02992d27d6f053b9fb289a92b36 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -97,7 +97,7 @@ static struct i2c_board_info __initdata i2c_devices_3ds[] = { static int lcd_power_gpio = -ENXIO; static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip, - void *data) + const void *data) { return !strcmp(chip->label, data); } diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c index 753f4fc9ec04ae1ddf908a7ba9b124d7f27b4379..05641980dc5e7c86ede296ef01129be70fea653b 100644 --- a/arch/arm/mach-imx/mach-mx53_ard.c +++ b/arch/arm/mach-imx/mach-mx53_ard.c @@ -23,6 +23,8 @@ #include #include #include +#include +#include #include #include @@ -214,6 +216,11 @@ static int weim_cs_config(void) return 0; } +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + void __init imx53_ard_common_init(void) { mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads, @@ -232,6 +239,7 @@ static void __init mx53_ard_board_init(void) imx53_ard_common_init(); mx53_ard_io_init(); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); platform_add_devices(devices, ARRAY_SIZE(devices)); imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data); diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index 05250aed61fbbc7f73f9e7b1c5b4bca00000f6fd..e10f3914fcfe6b1d2c59f9296d373805b4740901 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -35,7 +35,7 @@ static void imx5_idle(void) } clk_enable(gpc_dvfs_clk); mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); - if (tzic_enable_wake() != 0) + if (!tzic_enable_wake()) cpu_do_idle(); clk_disable(gpc_dvfs_clk); } diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 1c672d9e6656a02e8c93f7f2d712521266f3a936..f7fe1b9f31703cd3e5c21d932a59f5629ee28252 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index 3698a370d6360051f00cb02bbfc62cb861568e6d..26aac363a06405f865e76ea8c0db6324af8d85aa 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -86,9 +86,6 @@ static void __init halibut_init(void) static void __init halibut_fixup(struct tag *tags, char **cmdline, struct meminfo *mi) { - mi->nr_banks=1; - mi->bank[0].start = PHYS_OFFSET; - mi->bank[0].size = (101*1024*1024); } static void __init halibut_map_io(void) diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index 962e71169750a0243225b52c1ddda062779eb5e0..fb3496a52ef4c08921de04e75e4682ad00e796a2 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -49,10 +50,22 @@ static void __init msm8x60_map_io(void) msm_map_msm8x60_io(); } +#ifdef CONFIG_OF +static struct of_device_id msm_dt_gic_match[] __initdata = { + { .compatible = "qcom,msm-8660-qgic", .data = gic_of_init }, + {} +}; +#endif + static void __init msm8x60_init_irq(void) { - gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE, - (void *)MSM_QGIC_CPU_BASE); + if (!of_have_populated_dt()) + gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE, + (void *)MSM_QGIC_CPU_BASE); +#ifdef CONFIG_OF + else + of_irq_init(msm_dt_gic_match); +#endif /* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */ writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4); @@ -73,16 +86,8 @@ static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = { {} }; -static struct of_device_id msm_dt_gic_match[] __initdata = { - { .compatible = "qcom,msm-8660-qgic", }, - {} -}; - static void __init msm8x60_dt_init(void) { - irq_domain_generate_simple(msm_dt_gic_match, MSM8X60_QGIC_DIST_PHYS, - GIC_SPI_START); - if (of_machine_is_compatible("qcom,msm8660-surf")) { printk(KERN_INFO "Init surf UART registers\n"); msm8x60_init_uart12dm(); diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c index 25105c1027fe44c1862b94605ca8d6fd520ff3c1..89bf6b426699863d8230d9fcdf2b9d66bfa3cdc3 100644 --- a/arch/arm/mach-msm/board-trout-panel.c +++ b/arch/arm/mach-msm/board-trout-panel.c @@ -12,6 +12,7 @@ #include #include +#include #include #include diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index 5414f76ec0a948578b6c2c28c2058acbb2ccf133..d4060a37e23d39776456974e97b361ac6522b1e5 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -19,6 +19,7 @@ #include #include +#include #include #include #include diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h index 169a8400745659171efcfcefa6a4e55b9dbef060..c14011fe832d2fa8f014c0c5a7805204e5949387 100644 --- a/arch/arm/mach-msm/include/mach/uncompress.h +++ b/arch/arm/mach-msm/include/mach/uncompress.h @@ -16,6 +16,7 @@ #ifndef __ASM_ARCH_MSM_UNCOMPRESS_H #define __ASM_ARCH_MSM_UNCOMPRESS_H +#include #include #include diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c index 67e701c7f183746c923d722163ec3c9dfc94cecf..9980dc736e7bb690c31f93560efcdd2925d74ffe 100644 --- a/arch/arm/mach-msm/proc_comm.c +++ b/arch/arm/mach-msm/proc_comm.c @@ -121,7 +121,7 @@ int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2) * and unknown state. This function should be called early to * wait on the ARM9. */ -void __init proc_comm_boot_wait(void) +void __devinit proc_comm_boot_wait(void) { void __iomem *base = MSM_SHARED_RAM_BASE; diff --git a/arch/arm/mach-msm/smd_debug.c b/arch/arm/mach-msm/smd_debug.c index 0c56a5aaf588f18c9b2e311620752137c2e83481..c56df9e932aec303aca92252040fe2d9344b5391 100644 --- a/arch/arm/mach-msm/smd_debug.c +++ b/arch/arm/mach-msm/smd_debug.c @@ -203,15 +203,9 @@ static ssize_t debug_read(struct file *file, char __user *buf, return simple_read_from_buffer(buf, count, ppos, debug_buffer, bsize); } -static int debug_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - static const struct file_operations debug_ops = { .read = debug_read, - .open = debug_open, + .open = simple_open, .llseek = default_llseek, }; diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index fcce7ff3763052204587f43cdf8f9345c8cb1763..cfd98b186fcc2955765caa2a53267bf68d806443 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -48,7 +48,7 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id) struct irq_chip *irq_chip = NULL; int gpio, irq_num, fiq_count; - irq_desc = irq_to_desc(IH_GPIO_BASE); + irq_desc = irq_to_desc(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK)); if (irq_desc) irq_chip = irq_desc->irq_data.chip; diff --git a/arch/arm/mach-omap1/include/mach/io.h b/arch/arm/mach-omap1/include/mach/io.h new file mode 100644 index 0000000000000000000000000000000000000000..ce4f8005b26f4529565179198cb8de15a222cfcd --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/io.h @@ -0,0 +1,45 @@ +/* + * arch/arm/mach-omap1/include/mach/io.h + * + * IO definitions for TI OMAP processors and boards + * + * Copied from arch/arm/mach-sa1100/include/mach/io.h + * Copyright (C) 1997-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Modifications: + * 06-12-1997 RMK Created. + * 07-04-1999 RMK Major cleanup + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We don't actually have real ISA nor PCI buses, but there is so many + * drivers out there that might just work if we fake them... + */ +#define __io(a) __typesafe_io(a) + +#endif diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 087dba0df47e305fd059b97885c68f696d4c8ea5..e9cc52d4cb2869964b933b8a4a74ee844bb003d8 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -27,6 +27,7 @@ #include #include +#include #include diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c index 6e90665a7c47f6d4ed929b57dd6a79d9c7ed4f2a..fb202af01d0dc2fbb1f9622d220b90335e939de8 100644 --- a/arch/arm/mach-omap1/timer.c +++ b/arch/arm/mach-omap1/timer.c @@ -47,9 +47,9 @@ static int omap1_dm_timer_set_src(struct platform_device *pdev, int n = (pdev->id - 1) << 1; u32 l; - l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); + l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); l |= source << n; - __raw_writel(l, MOD_CONF_CTRL_1); + omap_writel(l, MOD_CONF_CTRL_1); return 0; } diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index a39fc4bbd2b8ffb9cb8bb06c1c91f1c40e120333..130ab00c09a2b00751f7c3e90dfa2ffb8eac7882 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -560,7 +561,7 @@ static struct regulator_init_data sdp4430_vusim = { }, }; -static struct twl4030_codec_data twl6040_codec = { +static struct twl6040_codec_data twl6040_codec = { /* single-step ramp for headset and handsfree */ .hs_left_step = 0x0f, .hs_right_step = 0x0f, @@ -568,7 +569,7 @@ static struct twl4030_codec_data twl6040_codec = { .hf_right_step = 0x1d, }; -static struct twl4030_vibra_data twl6040_vibra = { +static struct twl6040_vibra_data twl6040_vibra = { .vibldrv_res = 8, .vibrdrv_res = 3, .viblmotor_res = 10, @@ -577,16 +578,14 @@ static struct twl4030_vibra_data twl6040_vibra = { .vddvibr_uV = 0, /* fixed volt supply - VBAT */ }; -static struct twl4030_audio_data twl6040_audio = { +static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .vibra = &twl6040_vibra, .audpwron_gpio = 127, - .naudint_irq = OMAP44XX_IRQ_SYS_2N, .irq_base = TWL6040_CODEC_IRQ_BASE, }; static struct twl4030_platform_data sdp4430_twldata = { - .audio = &twl6040_audio, /* Regulators */ .vusim = &sdp4430_vusim, .vaux1 = &sdp4430_vaux1, @@ -617,7 +616,8 @@ static int __init omap4_i2c_init(void) TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | TWL_COMMON_REGULATOR_CLK32KG); - omap4_pmic_init("twl6030", &sdp4430_twldata); + omap4_pmic_init("twl6030", &sdp4430_twldata, + &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 41b0a2fe0b04b2de9d2953e3d938426068bbb0c5..909a8b91b564278d5d481845d8ad5ba249f69d0e 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -26,6 +26,7 @@ #include #include +#include #include #include @@ -81,8 +82,23 @@ static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = { .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, }; +static struct regulator_consumer_supply cm_t35_smsc911x_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + +static struct regulator_consumer_supply sb_t35_smsc911x_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.1"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.1"), +}; + static void __init cm_t35_init_ethernet(void) { + regulator_register_fixed(0, cm_t35_smsc911x_supplies, + ARRAY_SIZE(cm_t35_smsc911x_supplies)); + regulator_register_fixed(1, sb_t35_smsc911x_supplies, + ARRAY_SIZE(sb_t35_smsc911x_supplies)); + gpmc_smsc911x_init(&cm_t35_smsc911x_cfg); gpmc_smsc911x_init(&sb_t35_smsc911x_cfg); } diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 74e1687b51706317672694d80ac79aa92f0c416f..098d183a008655c6dd66895346033d76da74ecbe 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -137,7 +137,7 @@ static struct twl4030_platform_data sdp4430_twldata = { static void __init omap4_i2c_init(void) { - omap4_pmic_init("twl6030", &sdp4430_twldata); + omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0); } static void __init omap4_init(void) diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index e558800adfdf58bdd69b55398ed8a7f3c4b332b0..740cee9369bae3c0eeff216aa967b0deb37a33b7 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -634,8 +634,14 @@ static void __init igep_wlan_bt_init(void) static inline void __init igep_wlan_bt_init(void) { } #endif +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static void __init igep_init(void) { + regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); /* Get IGEP2 hardware revision */ diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index d50a562adfa0b08c4eed8318711384833385571f..1b6049567ab49621d59061d80b34d6cb84a94cf0 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -410,8 +411,14 @@ static struct mtd_partition ldp_nand_partitions[] = { }; +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static void __init omap_ldp_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); ldp_init_smsc911x(); omap_i2c_init(); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 4c90f078abe16fe7a7aba37c31800ae364ca611b..49df12735b41916db3a9d222880ddb4dcd89015d 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -114,15 +114,6 @@ static struct omap_smsc911x_platform_data smsc911x_cfg = { static inline void __init omap3evm_init_smsc911x(void) { - struct clk *l3ck; - unsigned int rate; - - l3ck = clk_get(NULL, "l3_ck"); - if (IS_ERR(l3ck)) - rate = 100000000; - else - rate = clk_get_rate(l3ck); - /* Configure ethernet controller reset gpio */ if (cpu_is_omap3430()) { if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1) @@ -632,9 +623,15 @@ static void __init omap3_evm_wl12xx_init(void) #endif } +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static void __init omap3_evm_init(void) { omap3_evm_get_revision(); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); if (cpu_is_omap3630()) omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB); diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 4a7d8c8a75da5298e2647e30aed3c4b87d8c5fef..9b3c141ff51bc575d65f157daf702df4ba6eab89 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -23,6 +23,7 @@ #include #include +#include #include #include @@ -188,8 +189,14 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static void __init omap3logic_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3torpedo_fix_pbias_voltage(); omap3logic_i2c_init(); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 641004380795f458c9432bf1056dd63187a5a33e..4dffc95bddd25836f85f06cc50dc3909fbc83abb 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -24,6 +24,7 @@ #include #include +#include #include #include #include @@ -72,15 +73,6 @@ static struct omap_smsc911x_platform_data smsc911x_cfg = { static inline void __init omap3stalker_init_eth(void) { - struct clk *l3ck; - unsigned int rate; - - l3ck = clk_get(NULL, "l3_ck"); - if (IS_ERR(l3ck)) - rate = 100000000; - else - rate = clk_get_rate(l3ck); - omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP); gpmc_smsc911x_init(&smsc911x_cfg); } @@ -419,8 +411,14 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static void __init omap3_stalker_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_board_config = omap3_stalker_config; omap_board_config_size = ARRAY_SIZE(omap3_stalker_config); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index d8c0e89f0126a2b4a7ba2a87d49641d1cf05c57c..1b782ba534336f6f3d3236e10316733f0f1b2abc 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -284,7 +285,7 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) return 0; } -static struct twl4030_codec_data twl6040_codec = { +static struct twl6040_codec_data twl6040_codec = { /* single-step ramp for headset and handsfree */ .hs_left_step = 0x0f, .hs_right_step = 0x0f, @@ -292,17 +293,14 @@ static struct twl4030_codec_data twl6040_codec = { .hf_right_step = 0x1d, }; -static struct twl4030_audio_data twl6040_audio = { +static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .audpwron_gpio = 127, - .naudint_irq = OMAP44XX_IRQ_SYS_2N, .irq_base = TWL6040_CODEC_IRQ_BASE, }; /* Panda board uses the common PMIC configuration */ -static struct twl4030_platform_data omap4_panda_twldata = { - .audio = &twl6040_audio, -}; +static struct twl4030_platform_data omap4_panda_twldata; /* * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM @@ -326,7 +324,8 @@ static int __init omap4_panda_i2c_init(void) TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | TWL_COMMON_REGULATOR_CLK32KG); - omap4_pmic_init("twl6030", &omap4_panda_twldata); + omap4_pmic_init("twl6030", &omap4_panda_twldata, + &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); /* * Bus 3 is attached to the DVI port where devices like the pico DLP diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 668533e2a3791442e3582696d365e964179124e8..33aa3910b09e0deb1d209e35c2aefdfd9ca4fc71 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -498,10 +498,18 @@ static struct gpio overo_bt_gpios[] __initdata = { { OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, }; +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), + REGULATOR_SUPPLY("vddvario", "smsc911x.1"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.1"), +}; + static void __init overo_init(void) { int ret; + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_hsmmc_init(mmc); overo_i2c_init(); diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index 1e8540eabde98188ced71d321d7b531a685b463a..f64f441730612adc5c095cfab972bbc8064837da 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -14,6 +14,9 @@ #include #include +#include +#include + #include #include @@ -117,11 +120,17 @@ static struct platform_device *zoom_devices[] __initdata = { &zoom_debugboard_serial_device, }; +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + int __init zoom_debugboard_init(void) { if (!omap_zoom_debugboard_detect()) return 0; + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); zoom_init_smsc911x(); zoom_init_quaduart(); return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices)); diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 7072e0d651b12356ec889158dde5102c5e7d6100..3d9d746b221ae0669fc01b1020ce0716c4f73a97 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -165,83 +165,3 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate) return 0; } - -#ifdef CONFIG_CPU_FREQ -/* - * Walk PRCM rate table and fillout cpufreq freq_table - * XXX This should be replaced by an OPP layer in the near future - */ -static struct cpufreq_frequency_table *freq_table; - -void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) -{ - const struct prcm_config *prcm; - int i = 0; - int tbl_sz = 0; - - if (!cpu_is_omap24xx()) - return; - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sclk->rate) - continue; - - /* don't put bypass rates in table */ - if (prcm->dpll_speed == prcm->xtal_speed) - continue; - - tbl_sz++; - } - - /* - * XXX Ensure that we're doing what CPUFreq expects for this error - * case and the following one - */ - if (tbl_sz == 0) { - pr_warning("%s: no matching entries in rate_table\n", - __func__); - return; - } - - /* Include the CPUFREQ_TABLE_END terminator entry */ - tbl_sz++; - - freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz, - GFP_ATOMIC); - if (!freq_table) { - pr_err("%s: could not kzalloc frequency table\n", __func__); - return; - } - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sclk->rate) - continue; - - /* don't put bypass rates in table */ - if (prcm->dpll_speed == prcm->xtal_speed) - continue; - - freq_table[i].index = i; - freq_table[i].frequency = prcm->mpu_speed / 1000; - i++; - } - - freq_table[i].index = i; - freq_table[i].frequency = CPUFREQ_TABLE_END; - - *table = &freq_table[0]; -} - -void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) -{ - if (!cpu_is_omap24xx()) - return; - - kfree(freq_table); -} - -#endif diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index f57ed5baeccf78f93c6b7f0a012a7b0da083c193..d9f4931513f97b4ba9020853ccbad621615d430f 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -536,10 +536,5 @@ struct clk_functions omap2_clk_functions = { .clk_set_rate = omap2_clk_set_rate, .clk_set_parent = omap2_clk_set_parent, .clk_disable_unused = omap2_clk_disable_unused, -#ifdef CONFIG_CPU_FREQ - /* These will be removed when the OPP code is integrated */ - .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table, - .clk_exit_cpufreq_table = omap2_clk_exit_cpufreq_table, -#endif }; diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index b8c2a686481ca313298253246e789e1ce844feea..a1bb23a23351262600d242873d71536c9e4de134 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -146,14 +146,6 @@ extern const struct clksel_rate gpt_sys_rates[]; extern const struct clksel_rate gfx_l3_rates[]; extern const struct clksel_rate dsp_ick_rates[]; -#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ) -extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table); -extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table); -#else -#define omap2_clk_init_cpufreq_table 0 -#define omap2_clk_exit_cpufreq_table 0 -#endif - extern const struct clkops clkops_omap2_iclk_dflt_wait; extern const struct clkops clkops_omap2_iclk_dflt; extern const struct clkops clkops_omap2_iclk_idle_only; diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 480fb8f09aeda407a1578e521483768e48c9784c..f4a626f7c79e9670d65edf05e9d5813883b42da8 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -747,7 +747,7 @@ static struct clk dpll4_m3_ck = { .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_TV_MASK, + .clksel_mask = OMAP3630_CLKSEL_TV_MASK, .clksel = dpll4_clksel, .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, @@ -832,7 +832,7 @@ static struct clk dpll4_m4_ck = { .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_DSS1_MASK, + .clksel_mask = OMAP3630_CLKSEL_DSS1_MASK, .clksel = dpll4_clksel, .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, @@ -859,7 +859,7 @@ static struct clk dpll4_m5_ck = { .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_CAM_MASK, + .clksel_mask = OMAP3630_CLKSEL_CAM_MASK, .clksel = dpll4_clksel, .clkdm_name = "dpll4_clkdm", .set_rate = &omap2_clksel_set_rate, @@ -886,7 +886,7 @@ static struct clk dpll4_m6_ck = { .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_DIV_DPLL4_MASK, + .clksel_mask = OMAP3630_DIV_DPLL4_MASK, .clksel = dpll4_clksel, .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, @@ -1394,6 +1394,7 @@ static struct clk cpefuse_fck = { .name = "cpefuse_fck", .ops = &clkops_omap2_dflt, .parent = &sys_ck, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_CPEFUSE_SHIFT, .recalc = &followparent_recalc, @@ -1403,6 +1404,7 @@ static struct clk ts_fck = { .name = "ts_fck", .ops = &clkops_omap2_dflt, .parent = &omap_32k_fck, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_TS_SHIFT, .recalc = &followparent_recalc, @@ -1412,6 +1414,7 @@ static struct clk usbtll_fck = { .name = "usbtll_fck", .ops = &clkops_omap2_dflt_wait, .parent = &dpll5_m2_ck, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, .recalc = &followparent_recalc, @@ -1617,6 +1620,7 @@ static struct clk fshostusb_fck = { .name = "fshostusb_fck", .ops = &clkops_omap2_dflt_wait, .parent = &core_48m_fck, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT, .recalc = &followparent_recalc, @@ -2043,6 +2047,7 @@ static struct clk omapctrl_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_OMAPCTRL_SHIFT, .flags = ENABLE_ON_INIT, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -2094,6 +2099,7 @@ static struct clk usb_l4_ick = { .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), .clksel_mask = OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK, .clksel = usb_l4_clksel, + .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -3467,8 +3473,8 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX), CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX), CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX), - CLK("davinci_emac", "emac_clk", &emac_ick, CK_AM35XX), - CLK("davinci_emac", "phy_clk", &emac_fck, CK_AM35XX), + CLK("davinci_emac", NULL, &emac_ick, CK_AM35XX), + CLK("davinci_mdio.0", NULL, &emac_fck, CK_AM35XX), CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX), CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX), CLK("musb-am35x", "ick", &hsotgusb_ick_am35xx, CK_AM35XX), diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index c03c1108468e1a59f5f203de7d092928e06bae79..fa6ea65ad44b0c87874cd54347eb74d48a24ae81 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -957,8 +957,8 @@ static struct dpll_data dpll_usb_dd = { .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_USB, .idlest_reg = OMAP4430_CM_IDLEST_DPLL_USB, - .mult_mask = OMAP4430_DPLL_MULT_MASK, - .div1_mask = OMAP4430_DPLL_DIV_MASK, + .mult_mask = OMAP4430_DPLL_MULT_USB_MASK, + .div1_mask = OMAP4430_DPLL_DIV_0_7_MASK, .enable_mask = OMAP4430_DPLL_EN_MASK, .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, @@ -978,6 +978,7 @@ static struct clk dpll_usb_ck = { .recalc = &omap3_dpll_recalc, .round_rate = &omap2_dpll_round_rate, .set_rate = &omap3_noncore_dpll_set_rate, + .clkdm_name = "l3_init_clkdm", }; static struct clk dpll_usb_clkdcoldo_ck = { diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index 9299ac291d28165b74f23bcb5e7ed73741c6a31b..bd7ed13515cc75c78662ef8adb323b693407247f 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -390,7 +390,7 @@ static struct clockdomain emu_sys_44xx_clkdm = { .prcm_partition = OMAP4430_PRM_PARTITION, .cm_inst = OMAP4430_PRM_EMU_CM_INST, .clkdm_offs = OMAP4430_PRM_EMU_CM_EMU_CDOFFS, - .flags = CLKDM_CAN_HWSUP, + .flags = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_FORCE_WAKEUP, }; static struct clockdomain l3_dma_44xx_clkdm = { diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index 5e5880d6d099e9a17e29436f7515f27ad2f94093..b6c77be3e8f762a144fd993553d88aa4ebe7f101 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -19,15 +19,11 @@ #include #include #include -#include -#include #include #include #include -static struct omap_smsc911x_platform_data *gpmc_cfg; - static struct resource gpmc_smsc911x_resources[] = { [0] = { .flags = IORESOURCE_MEM, @@ -41,51 +37,6 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = { .phy_interface = PHY_INTERFACE_MODE_MII, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_16BIT, -}; - -static struct regulator_consumer_supply gpmc_smsc911x_supply[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.0"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), -}; - -/* Generic regulator definition to satisfy smsc911x */ -static struct regulator_init_data gpmc_smsc911x_reg_init_data = { - .constraints = { - .min_uV = 3300000, - .max_uV = 3300000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(gpmc_smsc911x_supply), - .consumer_supplies = gpmc_smsc911x_supply, -}; - -static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = { - .supply_name = "gpmc_smsc911x", - .microvolts = 3300000, - .gpio = -EINVAL, - .startup_delay = 0, - .enable_high = 0, - .enabled_at_boot = 1, - .init_data = &gpmc_smsc911x_reg_init_data, -}; - -/* - * Platform device id of 42 is a temporary fix to avoid conflicts - * with other reg-fixed-voltage devices. The real fix should - * involve the driver core providing a way of dynamically - * assigning a unique id on registration for platform devices - * in the same name space. - */ -static struct platform_device gpmc_smsc911x_regulator = { - .name = "reg-fixed-voltage", - .id = 42, - .dev = { - .platform_data = &gpmc_smsc911x_fixed_reg_data, - }, }; /* @@ -93,23 +44,12 @@ static struct platform_device gpmc_smsc911x_regulator = { * assume that pin multiplexing is done in the board-*.c file, * or in the bootloader. */ -void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) +void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *gpmc_cfg) { struct platform_device *pdev; unsigned long cs_mem_base; int ret; - gpmc_cfg = board_data; - - if (!gpmc_cfg->id) { - ret = platform_device_register(&gpmc_smsc911x_regulator); - if (ret < 0) { - pr_err("Unable to register smsc911x regulators: %d\n", - ret); - return; - } - } - if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { pr_err("Failed to request GPMC mem region\n"); return; @@ -139,8 +79,7 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) gpio_set_value(gpmc_cfg->gpio_reset, 1); } - if (gpmc_cfg->flags) - gpmc_smsc911x_config.flags = gpmc_cfg->flags; + gpmc_smsc911x_config.flags = gpmc_cfg->flags ? : SMSC911X_USE_16BIT; pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id, gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources), diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 100db6217f39984428ba49df988df65c2307f936..b0268eaffe1353dcba99f46eaf76971ccb94c178 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -506,6 +506,13 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, if (oh->dev_attr != NULL) { mmc_dev_attr = oh->dev_attr; mmc_data->controller_flags = mmc_dev_attr->flags; + /* + * erratum 2.1.1.128 doesn't apply if board has + * a transceiver is attached + */ + if (hsmmcinfo->transceiver) + mmc_data->controller_flags &= + ~OMAP_HSMMC_BROKEN_MULTIBLOCK_READ; } pdev = platform_device_alloc(name, ctrl_nr - 1); diff --git a/arch/arm/mach-omap2/include/mach/barriers.h b/arch/arm/mach-omap2/include/mach/barriers.h index 4fa72c7cc7cdee537c65dbc13b553ce60dd667b6..1c582a8592b936be6184dcf84c2272960c1e662e 100644 --- a/arch/arm/mach-omap2/include/mach/barriers.h +++ b/arch/arm/mach-omap2/include/mach/barriers.h @@ -22,6 +22,8 @@ #ifndef __MACH_BARRIERS_H #define __MACH_BARRIERS_H +#include + extern void omap_bus_sync(void); #define rmb() dsb() diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h index 1e2d3322f33eec1e644350c2aeda84718569378a..c88420de1151f9495c0ccf92aa8b718f38218b77 100644 --- a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h +++ b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h @@ -941,10 +941,10 @@ #define OMAP4_DSI2_LANEENABLE_MASK (0x7 << 29) #define OMAP4_DSI1_LANEENABLE_SHIFT 24 #define OMAP4_DSI1_LANEENABLE_MASK (0x1f << 24) -#define OMAP4_DSI2_PIPD_SHIFT 19 -#define OMAP4_DSI2_PIPD_MASK (0x1f << 19) -#define OMAP4_DSI1_PIPD_SHIFT 14 -#define OMAP4_DSI1_PIPD_MASK (0x1f << 14) +#define OMAP4_DSI1_PIPD_SHIFT 19 +#define OMAP4_DSI1_PIPD_MASK (0x1f << 19) +#define OMAP4_DSI2_PIPD_SHIFT 14 +#define OMAP4_DSI2_PIPD_MASK (0x1f << 14) /* CONTROL_MCBSPLP */ #define OMAP4_ALBCTRLRX_FSX_SHIFT 31 diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index eba6cd3816f5e917d09aa5d8367c84f27a6e51dc..7144ae651d3defcb6e74f9f59ce7f38207691bf4 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1395,7 +1395,7 @@ static int _read_hardreset(struct omap_hwmod *oh, const char *name) */ static int _ocp_softreset(struct omap_hwmod *oh) { - u32 v; + u32 v, softrst_mask; int c = 0; int ret = 0; @@ -1422,16 +1422,21 @@ static int _ocp_softreset(struct omap_hwmod *oh) goto dis_opt_clks; _write_sysconfig(v, oh); + if (oh->class->sysc->srst_udelay) + udelay(oh->class->sysc->srst_udelay); + if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS) omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs) & SYSS_RESETDONE_MASK), MAX_MODULE_SOFTRESET_WAIT, c); - else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) + else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) { + softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift); omap_test_timeout(!(omap_hwmod_read(oh, oh->class->sysc->sysc_offs) - & SYSC_TYPE2_SOFTRESET_MASK), + & softrst_mask), MAX_MODULE_SOFTRESET_WAIT, c); + } if (c == MAX_MODULE_SOFTRESET_WAIT) pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n", @@ -1477,6 +1482,11 @@ static int _reset(struct omap_hwmod *oh) ret = (oh->class->reset) ? oh->class->reset(oh) : _ocp_softreset(oh); + if (oh->class->sysc) { + _update_sysc_cache(oh); + _enable_sysc(oh); + } + return ret; } @@ -1786,20 +1796,9 @@ static int _setup(struct omap_hwmod *oh, void *data) return 0; } - if (!(oh->flags & HWMOD_INIT_NO_RESET)) { + if (!(oh->flags & HWMOD_INIT_NO_RESET)) _reset(oh); - /* - * OCP_SYSCONFIG bits need to be reprogrammed after a softreset. - * The _enable() function should be split to - * avoid the rewrite of the OCP_SYSCONFIG register. - */ - if (oh->class->sysc) { - _update_sysc_cache(oh); - _enable_sysc(oh); - } - } - postsetup_state = oh->_postsetup_state; if (postsetup_state == _HWMOD_STATE_UNKNOWN) postsetup_state = _HWMOD_STATE_ENABLED; @@ -2463,26 +2462,28 @@ int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh, * @oh: struct omap_hwmod * * * Sets the module OCP socket ENAWAKEUP bit to allow the module to - * send wakeups to the PRCM. Eventually this should sets PRCM wakeup - * registers to cause the PRCM to receive wakeup events from the - * module. Does not set any wakeup routing registers beyond this - * point - if the module is to wake up any other module or subsystem, - * that must be set separately. Called by omap_device code. Returns - * -EINVAL on error or 0 upon success. + * send wakeups to the PRCM, and enable I/O ring wakeup events for + * this IP block if it has dynamic mux entries. Eventually this + * should set PRCM wakeup registers to cause the PRCM to receive + * wakeup events from the module. Does not set any wakeup routing + * registers beyond this point - if the module is to wake up any other + * module or subsystem, that must be set separately. Called by + * omap_device code. Returns -EINVAL on error or 0 upon success. */ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh) { unsigned long flags; u32 v; - if (!oh->class->sysc || - !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) - return -EINVAL; - spin_lock_irqsave(&oh->_lock, flags); - v = oh->_sysc_cache; - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); + + if (oh->class->sysc && + (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) { + v = oh->_sysc_cache; + _enable_wakeup(oh, &v); + _write_sysconfig(v, oh); + } + _set_idle_ioring_wakeup(oh, true); spin_unlock_irqrestore(&oh->_lock, flags); @@ -2494,26 +2495,28 @@ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh) * @oh: struct omap_hwmod * * * Clears the module OCP socket ENAWAKEUP bit to prevent the module - * from sending wakeups to the PRCM. Eventually this should clear - * PRCM wakeup registers to cause the PRCM to ignore wakeup events - * from the module. Does not set any wakeup routing registers beyond - * this point - if the module is to wake up any other module or - * subsystem, that must be set separately. Called by omap_device - * code. Returns -EINVAL on error or 0 upon success. + * from sending wakeups to the PRCM, and disable I/O ring wakeup + * events for this IP block if it has dynamic mux entries. Eventually + * this should clear PRCM wakeup registers to cause the PRCM to ignore + * wakeup events from the module. Does not set any wakeup routing + * registers beyond this point - if the module is to wake up any other + * module or subsystem, that must be set separately. Called by + * omap_device code. Returns -EINVAL on error or 0 upon success. */ int omap_hwmod_disable_wakeup(struct omap_hwmod *oh) { unsigned long flags; u32 v; - if (!oh->class->sysc || - !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) - return -EINVAL; - spin_lock_irqsave(&oh->_lock, flags); - v = oh->_sysc_cache; - _disable_wakeup(oh, &v); - _write_sysconfig(v, oh); + + if (oh->class->sysc && + (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) { + v = oh->_sysc_cache; + _disable_wakeup(oh, &v); + _write_sysconfig(v, oh); + } + _set_idle_ioring_wakeup(oh, false); spin_unlock_irqrestore(&oh->_lock, flags); diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index a5409ce3f3233eaac531ed070fc1f9cf74e8398f..a6bde34e443a7719fcefcbf447779ea16c9202b0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -1000,7 +1000,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = { .flags = OMAP_FIREWALL_L4, } }, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index c4f56cb60d7d676ddda36e232c8b385a58fef6ba..04a3885f4475f6e6ff865c4624a19d58b061a7f4 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1049,7 +1049,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = { .slave = &omap2430_dss_venc_hwmod, .clk = "dss_ick", .addr = omap2_dss_venc_addrs, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 34b9766d1d231845356b2c71626fa234a731bee6..db86ce90c69fbc769fd1c63005a5ad188e43f33b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1676,7 +1676,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = { .flags = OMAP_FIREWALL_L4, } }, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 08daa5e0eb5fdbd1fa3a20c5c1ba4dd1112b3d90..6abc75753e42b2048ab7e7a4e4d158064efcce8b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2594,6 +2594,15 @@ static struct omap_hwmod omap44xx_ipu_hwmod = { static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, + /* + * ISS needs 100 OCP clk cycles delay after a softreset before + * accessing sysconfig again. + * The lowest frequency at the moment for L3 bus is 100 MHz, so + * 1usec delay is needed. Add an x2 margin to be safe (2 usecs). + * + * TODO: Indicate errata when available. + */ + .srst_udelay = 2, .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | @@ -2996,6 +3005,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp1_slaves[] = { &omap44xx_l4_abe__mcbsp1_dma, }; +static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = { + { .role = "pad_fck", .clk = "pad_clks_ck" }, + { .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" }, +}; + static struct omap_hwmod omap44xx_mcbsp1_hwmod = { .name = "mcbsp1", .class = &omap44xx_mcbsp_hwmod_class, @@ -3012,6 +3026,8 @@ static struct omap_hwmod omap44xx_mcbsp1_hwmod = { }, .slaves = omap44xx_mcbsp1_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp1_slaves), + .opt_clks = mcbsp1_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp1_opt_clks), }; /* mcbsp2 */ @@ -3071,6 +3087,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp2_slaves[] = { &omap44xx_l4_abe__mcbsp2_dma, }; +static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = { + { .role = "pad_fck", .clk = "pad_clks_ck" }, + { .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" }, +}; + static struct omap_hwmod omap44xx_mcbsp2_hwmod = { .name = "mcbsp2", .class = &omap44xx_mcbsp_hwmod_class, @@ -3087,6 +3108,8 @@ static struct omap_hwmod omap44xx_mcbsp2_hwmod = { }, .slaves = omap44xx_mcbsp2_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp2_slaves), + .opt_clks = mcbsp2_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp2_opt_clks), }; /* mcbsp3 */ @@ -3146,6 +3169,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp3_slaves[] = { &omap44xx_l4_abe__mcbsp3_dma, }; +static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = { + { .role = "pad_fck", .clk = "pad_clks_ck" }, + { .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" }, +}; + static struct omap_hwmod omap44xx_mcbsp3_hwmod = { .name = "mcbsp3", .class = &omap44xx_mcbsp_hwmod_class, @@ -3162,6 +3190,8 @@ static struct omap_hwmod omap44xx_mcbsp3_hwmod = { }, .slaves = omap44xx_mcbsp3_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp3_slaves), + .opt_clks = mcbsp3_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp3_opt_clks), }; /* mcbsp4 */ @@ -3200,6 +3230,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp4_slaves[] = { &omap44xx_l4_per__mcbsp4, }; +static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = { + { .role = "pad_fck", .clk = "pad_clks_ck" }, + { .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" }, +}; + static struct omap_hwmod omap44xx_mcbsp4_hwmod = { .name = "mcbsp4", .class = &omap44xx_mcbsp_hwmod_class, @@ -3216,6 +3251,8 @@ static struct omap_hwmod omap44xx_mcbsp4_hwmod = { }, .slaves = omap44xx_mcbsp4_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp4_slaves), + .opt_clks = mcbsp4_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp4_opt_clks), }; /* diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c index 9262a6b47702582d30a2a75d21cb3637c2252a24..de6d46451746eaa19f2ba2a28c6385531acddce3 100644 --- a/arch/arm/mach-omap2/opp.c +++ b/arch/arm/mach-omap2/opp.c @@ -64,10 +64,10 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def, } oh = omap_hwmod_lookup(opp_def->hwmod_name); if (!oh || !oh->od) { - pr_warn("%s: no hwmod or odev for %s, [%d] " + pr_debug("%s: no hwmod or odev for %s, [%d] " "cannot add OPPs.\n", __func__, opp_def->hwmod_name, i); - return -EINVAL; + continue; } dev = &oh->od->pdev->dev; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 238defc6f6df26a185794510f8f031d0848afda8..703bd10992591ce2a05635052c9cb685dd5c9c83 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -153,8 +153,7 @@ static void omap3_save_secure_ram_context(void) pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state); /* Following is for error tracking, it should not happen */ if (ret) { - printk(KERN_ERR "save_secure_sram() returns %08x\n", - ret); + pr_err("save_secure_sram() returns %08x\n", ret); while (1) ; } @@ -289,7 +288,7 @@ void omap_sram_idle(void) break; default: /* Invalid state */ - printk(KERN_ERR "Invalid mpu state in sram_idle\n"); + pr_err("Invalid mpu state in sram_idle\n"); return; } @@ -439,18 +438,17 @@ restore: list_for_each_entry(pwrst, &pwrst_list, node) { state = pwrdm_read_prev_pwrst(pwrst->pwrdm); if (state > pwrst->next_state) { - printk(KERN_INFO "Powerdomain (%s) didn't enter " - "target state %d\n", + pr_info("Powerdomain (%s) didn't enter " + "target state %d\n", pwrst->pwrdm->name, pwrst->next_state); ret = -1; } omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); } if (ret) - printk(KERN_ERR "Could not enter target state in pm_suspend\n"); + pr_err("Could not enter target state in pm_suspend\n"); else - printk(KERN_INFO "Successfully put all powerdomains " - "to target state\n"); + pr_info("Successfully put all powerdomains to target state\n"); return ret; } @@ -734,21 +732,22 @@ static int __init omap3_pm_init(void) if (ret) { pr_err("pm: Failed to request pm_io irq\n"); - goto err1; + goto err2; } ret = pwrdm_for_each(pwrdms_setup, NULL); if (ret) { - printk(KERN_ERR "Failed to setup powerdomains\n"); - goto err2; + pr_err("Failed to setup powerdomains\n"); + goto err3; } (void) clkdm_for_each(omap_pm_clkdms_setup, NULL); mpu_pwrdm = pwrdm_lookup("mpu_pwrdm"); if (mpu_pwrdm == NULL) { - printk(KERN_ERR "Failed to get mpu_pwrdm\n"); - goto err2; + pr_err("Failed to get mpu_pwrdm\n"); + ret = -EINVAL; + goto err3; } neon_pwrdm = pwrdm_lookup("neon_pwrdm"); @@ -781,8 +780,8 @@ static int __init omap3_pm_init(void) omap3_secure_ram_storage = kmalloc(0x803F, GFP_KERNEL); if (!omap3_secure_ram_storage) - printk(KERN_ERR "Memory allocation failed when" - "allocating for secure sram context\n"); + pr_err("Memory allocation failed when " + "allocating for secure sram context\n"); local_irq_disable(); local_fiq_disable(); @@ -796,14 +795,17 @@ static int __init omap3_pm_init(void) } omap3_save_scratchpad_contents(); -err1: return ret; -err2: - free_irq(INT_34XX_PRCM_MPU_IRQ, NULL); + +err3: list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) { list_del(&pwrst->node); kfree(pwrst); } + free_irq(omap_prcm_event_to_irq("io"), omap3_pm_init); +err2: + free_irq(omap_prcm_event_to_irq("wkup"), NULL); +err1: return ret; } diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index 9ccaadc2cf071011c39713548bf557ced9b789f7..8856253524292dcfb9ebffca53bcc3f83cf3151d 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -144,7 +144,7 @@ static void omap_default_idle(void) static int __init omap4_pm_init(void) { int ret; - struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm; + struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup; struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm; if (!cpu_is_omap44xx()) @@ -168,14 +168,19 @@ static int __init omap4_pm_init(void) * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as * expected. The hardware recommendation is to enable static * dependencies for these to avoid system lock ups or random crashes. + * The L4 wakeup depedency is added to workaround the OCP sync hardware + * BUG with 32K synctimer which lead to incorrect timer value read + * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which + * are part of L4 wakeup clockdomain. */ mpuss_clkdm = clkdm_lookup("mpuss_clkdm"); emif_clkdm = clkdm_lookup("l3_emif_clkdm"); l3_1_clkdm = clkdm_lookup("l3_1_clkdm"); l3_2_clkdm = clkdm_lookup("l3_2_clkdm"); l4_per_clkdm = clkdm_lookup("l4_per_clkdm"); + l4wkup = clkdm_lookup("l4_wkup_clkdm"); ducati_clkdm = clkdm_lookup("ducati_clkdm"); - if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || + if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || (!l4wkup) || (!l3_2_clkdm) || (!ducati_clkdm) || (!l4_per_clkdm)) goto err2; @@ -183,6 +188,7 @@ static int __init omap4_pm_init(void) ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm); ret |= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm); ret |= clkdm_add_wkdep(mpuss_clkdm, l4_per_clkdm); + ret |= clkdm_add_wkdep(mpuss_clkdm, l4wkup); ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm); ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm); if (ret) { diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 8a18d1bd61c80af893e3cc549daaaa2e10b90db3..96ad3dbeac3433b877028800e6b3a621b7e67666 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -972,7 +972,13 @@ int pwrdm_wait_transition(struct powerdomain *pwrdm) int pwrdm_state_switch(struct powerdomain *pwrdm) { - return _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW); + int ret; + + ret = pwrdm_wait_transition(pwrdm); + if (!ret) + ret = _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW); + + return ret; } int pwrdm_clkdm_state_switch(struct clockdomain *clkdm) diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index eac623c7c3d86c58869c4804f63ad576631c129a..f106d21ff581a3af4894fd45f58fe53aaebc6dd2 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -147,8 +147,9 @@ static inline u32 _read_pending_irq_reg(u16 irqen_offs, u16 irqst_offs) u32 mask, st; /* XXX read mask from RAM? */ - mask = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqen_offs); - st = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqst_offs); + mask = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, + irqen_offs); + st = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, irqst_offs); return mask & st; } @@ -180,7 +181,7 @@ void omap44xx_prm_read_pending_irqs(unsigned long *events) */ void omap44xx_prm_ocp_barrier(void) { - omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_REVISION_PRM_OFFSET); } @@ -198,19 +199,19 @@ void omap44xx_prm_ocp_barrier(void) void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask) { saved_mask[0] = - omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQSTATUS_MPU_OFFSET); saved_mask[1] = - omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET); - omap4_prm_write_inst_reg(0, OMAP4430_PRM_DEVICE_INST, + omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQENABLE_MPU_OFFSET); - omap4_prm_write_inst_reg(0, OMAP4430_PRM_DEVICE_INST, + omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQENABLE_MPU_2_OFFSET); /* OCP barrier */ - omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_REVISION_PRM_OFFSET); } @@ -226,9 +227,9 @@ void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask) */ void omap44xx_prm_restore_irqen(u32 *saved_mask) { - omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_DEVICE_INST, + omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQENABLE_MPU_OFFSET); - omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_DEVICE_INST, + omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQENABLE_MPU_2_OFFSET); } diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 873b51d494eace09418ad9da30e35d15642b6ef8..d28f848897d62083e339d493263032249a2760bd 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -290,7 +290,7 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) goto err; } - for (i = 0; i <= irq_setup->nr_regs; i++) { + for (i = 0; i < irq_setup->nr_regs; i++) { gc = irq_alloc_generic_chip("PRCM", 1, irq_setup->base_irq + i * 32, prm_base, handle_level_irq); diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 0cdd359a128ee855e357daee257ec38231a05658..9fc2f44188cbb5fa0657f45ee5b5f3e14662569b 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -108,8 +108,14 @@ static void omap_uart_set_noidle(struct platform_device *pdev) static void omap_uart_set_smartidle(struct platform_device *pdev) { struct omap_device *od = to_omap_device(pdev); + u8 idlemode; - omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART); + if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + + omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode); } #else @@ -120,124 +126,8 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX -static struct omap_device_pad default_uart1_pads[] __initdata = { - { - .name = "uart1_cts.uart1_cts", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart1_rts.uart1_rts", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart1_tx.uart1_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart1_rx.uart1_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_uart2_pads[] __initdata = { - { - .name = "uart2_cts.uart2_cts", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart2_rts.uart2_rts", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart2_tx.uart2_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart2_rx.uart2_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_uart3_pads[] __initdata = { - { - .name = "uart3_cts_rctx.uart3_cts_rctx", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart3_rts_sd.uart3_rts_sd", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart3_tx_irtx.uart3_tx_irtx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart3_rx_irrx.uart3_rx_irrx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = { - { - .name = "gpmc_wait2.uart4_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "gpmc_wait3.uart4_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE2, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE2, - }, -}; - -static struct omap_device_pad default_omap4_uart4_pads[] __initdata = { - { - .name = "uart4_tx.uart4_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart4_rx.uart4_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - }, -}; - static void omap_serial_fill_default_pads(struct omap_board_data *bdata) { - switch (bdata->id) { - case 0: - bdata->pads = default_uart1_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads); - break; - case 1: - bdata->pads = default_uart2_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads); - break; - case 2: - bdata->pads = default_uart3_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads); - break; - case 3: - if (cpu_is_omap44xx()) { - bdata->pads = default_omap4_uart4_pads; - bdata->pads_cnt = - ARRAY_SIZE(default_omap4_uart4_pads); - } else if (cpu_is_omap3630()) { - bdata->pads = default_omap36xx_uart4_pads; - bdata->pads_cnt = - ARRAY_SIZE(default_omap36xx_uart4_pads); - } - break; - default: - break; - } } #else static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {} diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 4b57757bf9d1200cf4e47e099734ec424cad47d2..7a7b89304c48eeb2e1af9f9b87f77d9d5dd5a6f1 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -37,6 +37,16 @@ static struct i2c_board_info __initdata pmic_i2c_board_info = { .flags = I2C_CLIENT_WAKE, }; +static struct i2c_board_info __initdata omap4_i2c1_board_info[] = { + { + .addr = 0x48, + .flags = I2C_CLIENT_WAKE, + }, + { + I2C_BOARD_INFO("twl6040", 0x4b), + }, +}; + void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) @@ -49,14 +59,31 @@ void __init omap_pmic_init(int bus, u32 clkrate, omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); } +void __init omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data, + struct twl6040_platform_data *twl6040_data, int twl6040_irq) +{ + /* PMIC part*/ + strncpy(omap4_i2c1_board_info[0].type, pmic_type, + sizeof(omap4_i2c1_board_info[0].type)); + omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N; + omap4_i2c1_board_info[0].platform_data = pmic_data; + + /* TWL6040 audio IC part */ + omap4_i2c1_board_info[1].irq = twl6040_irq; + omap4_i2c1_board_info[1].platform_data = twl6040_data; + + omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2); + +} + void __init omap_pmic_late_init(void) { /* Init the OMAP TWL parameters (if PMIC has been registerd) */ - if (!pmic_i2c_board_info.irq) - return; - - omap3_twl_init(); - omap4_twl_init(); + if (pmic_i2c_board_info.irq) + omap3_twl_init(); + if (omap4_i2c1_board_info[0].irq) + omap4_twl_init(); } #if defined(CONFIG_ARCH_OMAP3) diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 275dde8cb27aa789ce4d9bfa89c8ed92fb122711..09627483a57f917a3a1c74c39b232b951de1594f 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -29,6 +29,7 @@ struct twl4030_platform_data; +struct twl6040_platform_data; void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data); @@ -46,12 +47,9 @@ static inline void omap3_pmic_init(const char *pmic_type, omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data); } -static inline void omap4_pmic_init(const char *pmic_type, - struct twl4030_platform_data *pmic_data) -{ - /* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */ - omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data); -} +void omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data, + struct twl6040_platform_data *audio_data, int twl6040_irq); void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags); diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index f51348dafafdfb8ec85f48af6740fef8629f42b4..dde8a11f47d5ab9621dd3f6f0e87d1920351c9a2 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -54,7 +54,7 @@ static struct omap_device_pm_latency omap_uhhtll_latency[] = { /* * setup_ehci_io_mux - initialize IO pad mux for USBHOST */ -static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) +static void __init setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { case OMAP_EHCI_PORT_MODE_PHY: @@ -197,7 +197,8 @@ static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) return; } -static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) +static +void __init setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { case OMAP_EHCI_PORT_MODE_PHY: @@ -315,7 +316,7 @@ static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) } } -static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) +static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: @@ -412,7 +413,8 @@ static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) } } -static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) +static +void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: diff --git a/arch/arm/mach-orion5x/mpp.h b/arch/arm/mach-orion5x/mpp.h index eac68978a2c2a3103ce05f34cbbdf0628f473717..db70e79a11985f7705d2ce8ad90a7c7a9be97e49 100644 --- a/arch/arm/mach-orion5x/mpp.h +++ b/arch/arm/mach-orion5x/mpp.h @@ -65,8 +65,8 @@ #define MPP8_GIGE MPP(8, 0x1, 0, 0, 1, 1, 1) #define MPP9_UNUSED MPP(9, 0x0, 0, 0, 1, 1, 1) -#define MPP9_GPIO MPP(9, 0x0, 0, 0, 1, 1, 1) -#define MPP9_GIGE MPP(9, 0x1, 1, 1, 1, 1, 1) +#define MPP9_GPIO MPP(9, 0x0, 1, 1, 1, 1, 1) +#define MPP9_GIGE MPP(9, 0x1, 0, 0, 1, 1, 1) #define MPP10_UNUSED MPP(10, 0x0, 0, 0, 1, 1, 1) #define MPP10_GPIO MPP(10, 0x0, 1, 1, 1, 1, 1) diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 109ccd2a8885842dab6327e18ae4c4b49f0b35a0..fe2d1f80ef50ff340d63542e045e49295716cec9 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -113,6 +113,7 @@ config MACH_ARMCORE select IWMMXT select PXA25x select MIGHT_HAVE_PCI + select NEED_MACH_IO_H if PCI config MACH_EM_X270 bool "CompuLab EM-x270 platform" diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h new file mode 100644 index 0000000000000000000000000000000000000000..cd78b7fe35677bb8fe3d69b439994fa68a70db2e --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/io.h @@ -0,0 +1,17 @@ +/* + * arch/arm/mach-pxa/include/mach/io.h + * + * Copied from asm/arch/sa1100/io.h + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We don't actually have real ISA nor PCI buses, but there is so many + * drivers out there that might just work if we fake them... + */ +#define __io(a) __typesafe_io(a) + +#endif diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h index c54cef25895cdbbbe03c3922490f69be83409868..cbf51ae81855bc5bc255a4aa3abb606cf93bce68 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h @@ -17,6 +17,7 @@ * * bit 23 - Input/Output (PXA2xx specific) * bit 24 - Wakeup Enable(PXA2xx specific) + * bit 25 - Keep Output (PXA2xx specific) */ #define MFP_DIR_IN (0x0 << 23) @@ -25,6 +26,12 @@ #define MFP_DIR(x) (((x) >> 23) & 0x1) #define MFP_LPM_CAN_WAKEUP (0x1 << 24) + +/* + * MFP_LPM_KEEP_OUTPUT must be specified for pins that need to + * retain their last output level (low or high). + * Note: MFP_LPM_KEEP_OUTPUT has no effect on pins configured for input. + */ #define MFP_LPM_KEEP_OUTPUT (0x1 << 25) #define WAKEUP_ON_EDGE_RISE (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE) diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index b0a842887780f9acbe32e4223b4fe769f49b88f1..ef0426a159d4d4e04c681f7097fb8732d7096156 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -33,6 +33,8 @@ #define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) #define GPLR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5)) #define GPDR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c) +#define GPSR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x18) +#define GPCR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x24) #define PWER_WE35 (1 << 24) @@ -348,6 +350,7 @@ static inline void pxa27x_mfp_init(void) {} #ifdef CONFIG_PM static unsigned long saved_gafr[2][4]; static unsigned long saved_gpdr[4]; +static unsigned long saved_gplr[4]; static unsigned long saved_pgsr[4]; static int pxa2xx_mfp_suspend(void) @@ -366,14 +369,26 @@ static int pxa2xx_mfp_suspend(void) } for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) { - saved_gafr[0][i] = GAFR_L(i); saved_gafr[1][i] = GAFR_U(i); saved_gpdr[i] = GPDR(i * 32); + saved_gplr[i] = GPLR(i * 32); saved_pgsr[i] = PGSR(i); - GPDR(i * 32) = gpdr_lpm[i]; + GPSR(i * 32) = PGSR(i); + GPCR(i * 32) = ~PGSR(i); + } + + /* set GPDR bits taking into account MFP_LPM_KEEP_OUTPUT */ + for (i = 0; i < pxa_last_gpio; i++) { + if ((gpdr_lpm[gpio_to_bank(i)] & GPIO_bit(i)) || + ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) && + (saved_gpdr[gpio_to_bank(i)] & GPIO_bit(i)))) + GPDR(i) |= GPIO_bit(i); + else + GPDR(i) &= ~GPIO_bit(i); } + return 0; } @@ -384,6 +399,8 @@ static void pxa2xx_mfp_resume(void) for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) { GAFR_L(i) = saved_gafr[0][i]; GAFR_U(i) = saved_gafr[1][i]; + GPSR(i * 32) = saved_gplr[i]; + GPCR(i * 32) = ~saved_gplr[i]; GPDR(i * 32) = saved_gpdr[i]; PGSR(i) = saved_pgsr[i]; } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 6bce78edce7a3c070b197b57f1fcb16197c3ba7f..4726c246dcdc930bd5db27feb301221c2edced42 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -421,8 +421,11 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info) pxa_register_device(&pxa27x_device_i2c_power, info); } +static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = { + .gpio_set_wake = gpio_set_wake, +}; + static struct platform_device *devices[] __initdata = { - &pxa_device_gpio, &pxa27x_device_udc, &pxa_device_pmu, &pxa_device_i2s, @@ -458,6 +461,7 @@ static int __init pxa27x_init(void) register_syscore_ops(&pxa2xx_mfp_syscore_ops); register_syscore_ops(&pxa2xx_clock_syscore_ops); + pxa_register_device(&pxa_device_gpio, &pxa27x_gpio_info); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 0f3a327ebcaa380c823d251f65eb819bac9033a0..b34287ab5afd93502e9b5779918085c3b8eb68ec 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -111,10 +111,6 @@ config S3C24XX_SETUP_TS help Compile in platform device definition for Samsung TouchScreen. -# cpu-specific sections - -if CPU_S3C2410 - config S3C2410_DMA bool depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442) @@ -127,6 +123,10 @@ config S3C2410_PM help Power Management code common to S3C2410 and better +# cpu-specific sections + +if CPU_S3C2410 + config S3C24XX_SIMTEC_NOR bool help diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h new file mode 100644 index 0000000000000000000000000000000000000000..c2f596e7bc2d94361590d61bd919b18184a4e9ff --- /dev/null +++ b/arch/arm/mach-s3c24xx/common.h @@ -0,0 +1,18 @@ +/* + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Common Header for S3C24XX SoCs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H +#define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__ + +void s3c2410_restart(char mode, const char *cmd); +void s3c244x_restart(char mode, const char *cmd); + +#endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */ diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c index 86ce62f66190fe5a67c2c5dad4f092db67b4818e..b8337e248b0985587806fa9dab8b3759dd5c1ce3 100644 --- a/arch/arm/mach-s5pv210/dma.c +++ b/arch/arm/mach-s5pv210/dma.c @@ -33,8 +33,6 @@ #include #include -static u64 dma_dmamask = DMA_BIT_MASK(32); - static u8 pdma0_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index a9ea64e0da0d2758e7775a8590d431fc5725d563..48d018f2332bc020239ca49f7d42986dd30134f8 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -484,8 +484,8 @@ static struct wm8994_pdata wm8994_platform_data = { .gpio_defaults[8] = 0x0100, .gpio_defaults[9] = 0x0100, .gpio_defaults[10] = 0x0100, - .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */ - .ldo[1] = { 0, NULL, &wm8994_ldo2_data }, + .ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */ + .ldo[1] = { 0, &wm8994_ldo2_data }, }; /* GPIO I2C PMIC */ diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 2cf5ed75f3906ed21f6e5c028b7faaeb9f0c7bef..32395664e87917f640cdc70b74f287304a939b6a 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -674,8 +675,8 @@ static struct wm8994_pdata wm8994_platform_data = { .gpio_defaults[8] = 0x0100, .gpio_defaults[9] = 0x0100, .gpio_defaults[10] = 0x0100, - .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */ - .ldo[1] = { 0, NULL, &wm8994_ldo2_data }, + .ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */ + .ldo[1] = { 0, &wm8994_ldo2_data }, }; /* GPIO I2C PMIC */ @@ -765,6 +766,7 @@ static void __init goni_pmic_init(void) /* MoviNAND */ static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = { .max_width = 4, + .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, }; diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 48885b7efd6b895e470d616b5e8f895483747a7b..c7f418b0cde9bde3ba23c8d1ea73533fa775b700 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -313,6 +313,10 @@ static struct sa1100fb_mach_info collie_lcd_info = { .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), + +#ifdef CONFIG_BACKLIGHT_LOCOMO + .lcd_power = locomolcd_power +#endif }; static void __init collie_init(void) diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 7c524b4e415d7ec7843dcbd7987c663d2f447bd9..16be4c56abe3ff37a153807b93d066c49c0d94ab 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -306,7 +306,7 @@ void sa11x0_register_irda(struct irda_platform_data *irda) } static struct resource sa1100_rtc_resources[] = { - DEFINE_RES_MEM(0x90010000, 0x9001003f), + DEFINE_RES_MEM(0x90010000, 0x40), DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"), DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm, "rtc alarm"), }; diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h index 52acda7061b7f85ccbc9b1d6966b5ffe57671e86..f33679d2d3ee0a218d280972c5f409f0b561d41b 100644 --- a/arch/arm/mach-sa1100/include/mach/collie.h +++ b/arch/arm/mach-sa1100/include/mach/collie.h @@ -1,7 +1,7 @@ /* * arch/arm/mach-sa1100/include/mach/collie.h * - * This file contains the hardware specific definitions for Assabet + * This file contains the hardware specific definitions for Collie * Only include this file from SA1100-specific files. * * ChangeLog: @@ -13,6 +13,7 @@ #ifndef __ASM_ARCH_COLLIE_H #define __ASM_ARCH_COLLIE_H +extern void locomolcd_power(int on); #define COLLIE_SCOOP_GPIO_BASE (GPIO_MAX + 1) #define COLLIE_GPIO_CHARGE_ON (COLLIE_SCOOP_GPIO_BASE + 0) diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 34560cab45d916729ccf03733ca88aaa8f7c9023..2cda0c2af230be116f6301a4dbc88403205b58c8 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -58,6 +58,7 @@ config MACH_AP4EVB depends on ARCH_SH7372 select ARCH_REQUIRE_GPIOLIB select SH_LCD_MIPI_DSI + select SND_SOC_AK4642 if SND_SIMPLE_CARD choice prompt "AP4EVB LCD panel selection" @@ -82,6 +83,7 @@ config MACH_MACKEREL bool "mackerel board" depends on ARCH_SH7372 select ARCH_REQUIRE_GPIOLIB + select SND_SOC_AK4642 if SND_SIMPLE_CARD config MACH_KOTA2 bool "KOTA2 board" diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index cb224a344af0ccfa11a460297038a4a79ed151ce..0891ec6e27f502b8fe220a3bff3b97dfbbe44c69 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -365,23 +365,13 @@ static struct platform_device mipidsi0_device = { }; /* SDHI0 */ -static irqreturn_t ag5evm_sdhi0_gpio_cd(int irq, void *arg) -{ - struct device *dev = arg; - struct sh_mobile_sdhi_info *info = dev->platform_data; - struct tmio_mmc_data *pdata = info->pdata; - - tmio_mmc_cd_wakeup(pdata); - - return IRQ_HANDLED; -} - static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, .tmio_caps = MMC_CAP_SD_HIGHSPEED, .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, + .cd_gpio = GPIO_PORT251, }; static struct resource sdhi0_resources[] = { @@ -557,7 +547,6 @@ static void __init ag5evm_init(void) lcd_backlight_reset(); /* enable SDHI0 on CN15 [SD I/F] */ - gpio_request(GPIO_FN_SDHICD0, NULL); gpio_request(GPIO_FN_SDHIWP0, NULL); gpio_request(GPIO_FN_SDHICMD0, NULL); gpio_request(GPIO_FN_SDHICLK0, NULL); @@ -566,13 +555,6 @@ static void __init ag5evm_init(void) gpio_request(GPIO_FN_SDHID0_1, NULL); gpio_request(GPIO_FN_SDHID0_0, NULL); - if (!request_irq(intcs_evt2irq(0x3c0), ag5evm_sdhi0_gpio_cd, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - "sdhi0 cd", &sdhi0_device.dev)) - sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD; - else - pr_warn("Unable to setup SDHI0 GPIO IRQ\n"); - /* enable SDHI1 on CN4 [WLAN I/F] */ gpio_request(GPIO_FN_SDHICLK1, NULL); gpio_request(GPIO_FN_SDHICMD1_PU, NULL); diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index b56dde2732bbd2b5215c101f6a1ce57f026a712d..8302265977a8477b6ed1d31c1ccda777bffcfbf3 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -50,6 +50,7 @@ #include #include +#include #include