Staging: rtl8192e: Make arrays const

			660, 450, 540, 630, 540, 630, 720, 810, 720, 810, 900, 900, 990}	}	// Short GI, 40MHz

	};

static u8 UNKNOWN_BORADCOM[3] = {0x00, 0x14, 0xbf};

static u8 LINKSYSWRT330_LINKSYSWRT300_BROADCOM[3] = {0x00, 0x1a, 0x70};

static u8 LINKSYSWRT350_LINKSYSWRT150_BROADCOM[3] = {0x00, 0x1d, 0x7e};

static const u8 UNKNOWN_BORADCOM[3] = {0x00, 0x14, 0xbf};

static const u8 LINKSYSWRT330_LINKSYSWRT300_BROADCOM[3] = {0x00, 0x1a, 0x70};

static const u8 LINKSYSWRT350_LINKSYSWRT150_BROADCOM[3] = {0x00, 0x1d, 0x7e};

//static u8 NETGEAR834Bv2_BROADCOM[3] = {0x00, 0x1b, 0x2f};

static u8 BELKINF5D8233V1_RALINK[3] = {0x00, 0x17, 0x3f};	//cosa 03202008

static u8 BELKINF5D82334V3_RALINK[3] = {0x00, 0x1c, 0xdf};

static u8 PCI_RALINK[3] = {0x00, 0x90, 0xcc};

static u8 EDIMAX_RALINK[3] = {0x00, 0x0e, 0x2e};

static u8 AIRLINK_RALINK[3] = {0x00, 0x18, 0x02};

static u8 DLINK_ATHEROS[3] = {0x00, 0x1c, 0xf0};

static u8 CISCO_BROADCOM[3] = {0x00, 0x17, 0x94};

static u8 LINKSYS_MARVELL_4400N[3] = {0x00, 0x14, 0xa4};

static const u8 BELKINF5D8233V1_RALINK[3] = {0x00, 0x17, 0x3f};

static const u8 BELKINF5D82334V3_RALINK[3] = {0x00, 0x1c, 0xdf};

static const u8 PCI_RALINK[3] = {0x00, 0x90, 0xcc};

static const u8 EDIMAX_RALINK[3] = {0x00, 0x0e, 0x2e};

static const u8 AIRLINK_RALINK[3] = {0x00, 0x18, 0x02};

static const u8 DLINK_ATHEROS[3] = {0x00, 0x1c, 0xf0};

static const u8 CISCO_BROADCOM[3] = {0x00, 0x17, 0x94};

static const u8 LINKSYS_MARVELL_4400N[3] = {0x00, 0x14, 0xa4};

// 2008/04/01 MH For Cisco G mode RX TP We need to change FW duration. Should we put the

// code in other place??