Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 6f8d7022 authored by Barry Song's avatar Barry Song Committed by Rafael J. Wysocki
Browse files

PM / Hibernate: Add resumewait param to support MMC-like devices as resume file 



Some devices like MMC are async detected very slow. For example,
drivers/mmc/host/sdhci.c launches a 200ms delayed work to detect
MMC partitions then add disk.

We have wait_for_device_probe() and scsi_complete_async_scans()
before calling swsusp_check(), but it is not enough to wait for MMC.

This patch adds resumewait kernel param just like rootwait so
that we have enough time to wait until MMC is ready. The difference is
that we wait for resume partition whereas rootwait waits for rootfs
partition (which may be on a different device).

This patch will make hibernation support many embedded products
without SCSI devices, but with devices like MMC.

[rjw: Modified the changelog slightly.]

Signed-off-by: default avatarBarry Song <Baohua.Song@csr.com>
Reviewed-by: default avatarValdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
parent 21e82808

Documentation/kernel-parameters.txt

+4 −0
Original line number Diff line number Diff line
@@ -2240,6 +2240,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted. 
			in <PAGE_SIZE> units (needed only for swap files).

			See  Documentation/power/swsusp-and-swap-files.txt



	resumewait	[HIBERNATION] Wait (indefinitely) for resume device to show up.

			Useful for devices that are detected asynchronously

			(e.g. USB and MMC devices).



	hibernate=	[HIBERNATION]

		noresume	Don't check if there's a hibernation image

				present during boot.

kernel/power/hibernate.c

+16 −0
Original line number Diff line number Diff line
@@ -14,6 +14,7 @@ 
#include <linux/reboot.h>

#include <linux/string.h>

#include <linux/device.h>

#include <linux/async.h>

#include <linux/kmod.h>

#include <linux/delay.h>

#include <linux/fs.h>
@@ -31,6 +32,7 @@ 


static int nocompress = 0;

static int noresume = 0;

static int resume_wait = 0;

static char resume_file[256] = CONFIG_PM_STD_PARTITION;

dev_t swsusp_resume_device;

sector_t swsusp_resume_block;
@@ -736,6 +738,13 @@ static int software_resume(void) 
		 * to wait for this to finish.

		 */

		wait_for_device_probe();



		if (resume_wait) {

			while ((swsusp_resume_device = name_to_dev_t(resume_file)) == 0)

				msleep(10);

			async_synchronize_full();

		}



		/*

		 * We can't depend on SCSI devices being available after loading

		 * one of their modules until scsi_complete_async_scans() is
@@ -1064,7 +1073,14 @@ static int __init noresume_setup(char *str) 
	return 1;

}



static int __init resumewait_setup(char *str)

{

	resume_wait = 1;

	return 1;

}



__setup("noresume", noresume_setup);

__setup("resume_offset=", resume_offset_setup);

__setup("resume=", resume_setup);

__setup("hibernate=", hibernate_setup);

__setup("resumewait", resumewait_setup);