HID: sony: Fix multi-line comment styling (ad142b9e) · Commits · e / devices / android_kernel_samsung_universal8890

drivers/hid/hid-sony.c

+30 −15

Original line number	Diff line number	Diff line
		@@ -17,7 +17,8 @@
		* any later version.
		*/

		/* NOTE: in order for the Sony PS3 BD Remote Control to be found by
		/*
		* NOTE: in order for the Sony PS3 BD Remote Control to be found by
		* a Bluetooth host, the key combination Start+Enter has to be kept pressed
		* for about 7 seconds with the Bluetooth Host Controller in discovering mode.
		*
		@@ -81,7 +82,8 @@ static const u8 sixaxis_rdesc_fixup2[] = {
		0xb1, 0x02, 0xc0, 0xc0,
		};

		/* The default descriptor doesn't provide mapping for the accelerometers
		/*
		* The default descriptor doesn't provide mapping for the accelerometers
		* or orientation sensors. This fixed descriptor maps the accelerometers
		* to usage values 0x40, 0x41 and 0x42 and maps the orientation sensors
		* to usage values 0x43, 0x44 and 0x45.
		@@ -340,7 +342,8 @@ static u8 dualshock4_usb_rdesc[] = {
		0xC0 /* End Collection */
		};

		/* The default behavior of the Dualshock 4 is to send reports using report
		/*
		* The default behavior of the Dualshock 4 is to send reports using report
		* type 1 when running over Bluetooth. However, as soon as it receives a
		* report of type 17 to set the LEDs or rumble it starts returning it's state
		* in report 17 instead of 1. Since report 17 is undefined in the default HID
		@@ -667,7 +670,8 @@ static const unsigned int ps3remote_keymap_remote_buttons[] = {
		};

		static const unsigned int buzz_keymap[] = {
		/* The controller has 4 remote buzzers, each with one LED and 5
		/*
		* The controller has 4 remote buzzers, each with one LED and 5
		* buttons.
		*
		* We use the mapping chosen by the controller, which is:
		@@ -838,7 +842,8 @@ static void sixaxis_parse_report(struct sony_sc sc, __u8 rd, int size)
		unsigned long flags;
		__u8 cable_state, battery_capacity, battery_charging;

		/* The sixaxis is charging if the battery value is 0xee
		/*
		* The sixaxis is charging if the battery value is 0xee
		* and it is fully charged if the value is 0xef.
		* It does not report the actual level while charging so it
		* is set to 100% while charging is in progress.
		@@ -868,18 +873,21 @@ static void dualshock4_parse_report(struct sony_sc sc, __u8 rd, int size)
		int n, offset;
		__u8 cable_state, battery_capacity, battery_charging;

		/* Battery and touchpad data starts at byte 30 in the USB report and
		/*
		* Battery and touchpad data starts at byte 30 in the USB report and
		* 32 in Bluetooth report.
		*/
		offset = (sc->quirks & DUALSHOCK4_CONTROLLER_USB) ? 30 : 32;

		/* The lower 4 bits of byte 30 contain the battery level
		/*
		* The lower 4 bits of byte 30 contain the battery level
		* and the 5th bit contains the USB cable state.
		*/
		cable_state = (rd[offset] >> 4) & 0x01;
		battery_capacity = rd[offset] & 0x0F;

		/* When a USB power source is connected the battery level ranges from
		/*
		* When a USB power source is connected the battery level ranges from
		* 0 to 10, and when running on battery power it ranges from 0 to 9.
		* A battery level above 10 when plugged in means charge completed.
		*/
		@@ -903,7 +911,8 @@ static void dualshock4_parse_report(struct sony_sc sc, __u8 rd, int size)

		offset += 5;

		/* The Dualshock 4 multi-touch trackpad data starts at offset 35 on USB
		/*
		* The Dualshock 4 multi-touch trackpad data starts at offset 35 on USB
		* and 37 on Bluetooth.
		* The first 7 bits of the first byte is a counter and bit 8 is a touch
		* indicator that is 0 when pressed and 1 when not pressed.
		@@ -932,7 +941,8 @@ static int sony_raw_event(struct hid_device hdev, struct hid_report report,
		{
		struct sony_sc *sc = hid_get_drvdata(hdev);

		/* Sixaxis HID report has acclerometers/gyro with MSByte first, this
		/*
		* Sixaxis HID report has acclerometers/gyro with MSByte first, this
		* has to be BYTE_SWAPPED before passing up to joystick interface
		*/
		if ((sc->quirks & SIXAXIS_CONTROLLER) && rd[0] == 0x01 && size == 49) {
		@@ -1057,7 +1067,8 @@ static int sixaxis_set_operational_bt(struct hid_device *hdev)
		HID_FEATURE_REPORT);
		}

		/* Requesting feature report 0x02 in Bluetooth mode changes the state of the
		/*
		* Requesting feature report 0x02 in Bluetooth mode changes the state of the
		* controller so that it sends full input reports of type 0x11.
		*/
		static int dualshock4_set_operational_bt(struct hid_device *hdev)
		@@ -1211,9 +1222,11 @@ static int sony_leds_init(struct hid_device *hdev)
		name_fmt = "%s::sony%d";
		}

		/* Clear LEDs as we have no way of reading their initial state. This is
		/*
		* Clear LEDs as we have no way of reading their initial state. This is
		* only relevant if the driver is loaded after somebody actively set the
		* LEDs to on */
		* LEDs to on
		*/
		sony_set_leds(hdev, initial_values, drv_data->led_count);

		name_sz = strlen(dev_name(&hdev->dev)) + name_len + 1;
		@@ -1420,7 +1433,8 @@ static int sony_battery_probe(struct sony_sc *sc)
		struct hid_device *hdev = sc->hdev;
		int ret;

		/* Set the default battery level to 100% to avoid low battery warnings
		/*
		* Set the default battery level to 100% to avoid low battery warnings
		* if the battery is polled before the first device report is received.
		*/
		sc->battery_capacity = 100;
		@@ -1533,7 +1547,8 @@ static int sony_probe(struct hid_device hdev, const struct hid_device_id id)
		goto err_stop;
		}
		}
		/* The Dualshock 4 touchpad supports 2 touches and has a
		/*
		* The Dualshock 4 touchpad supports 2 touches and has a
		* resolution of 1920x940.
		*/
		ret = sony_register_touchpad(sc, 2, 1920, 940);