Loading CREDITS +8 −0 Original line number Original line Diff line number Diff line Loading @@ -518,6 +518,14 @@ N: Zach Brown E: zab@zabbo.net E: zab@zabbo.net D: maestro pci sound D: maestro pci sound N: David Brownell D: Kernel engineer, mentor, and friend. Maintained USB EHCI and D: gadget layers, SPI subsystem, GPIO subsystem, and more than a few D: device drivers. His encouragement also helped many engineers get D: started working on the Linux kernel. David passed away in early D: 2011, and will be greatly missed. W: https://lkml.org/lkml/2011/4/5/36 N: Gary Brubaker N: Gary Brubaker E: xavyer@ix.netcom.com E: xavyer@ix.netcom.com D: USB Serial Empeg Empeg-car Mark I/II Driver D: USB Serial Empeg Empeg-car Mark I/II Driver Loading Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 0 → 100644 +56 −0 Original line number Original line Diff line number Diff line What: /sys/class/backlight/<backlight>/<ambient light zone>_max What: /sys/class/backlight/<backlight>/l1_daylight_max What: /sys/class/backlight/<backlight>/l2_bright_max What: /sys/class/backlight/<backlight>/l3_office_max What: /sys/class/backlight/<backlight>/l4_indoor_max What: /sys/class/backlight/<backlight>/l5_dark_max Date: Mai 2011 KernelVersion: 2.6.40 Contact: device-drivers-devel@blackfin.uclinux.org Description: Control the maximum brightness for <ambient light zone> on this <backlight>. Values are between 0 and 127. This file will also show the brightness level stored for this <ambient light zone>. What: /sys/class/backlight/<backlight>/<ambient light zone>_dim What: /sys/class/backlight/<backlight>/l2_bright_dim What: /sys/class/backlight/<backlight>/l3_office_dim What: /sys/class/backlight/<backlight>/l4_indoor_dim What: /sys/class/backlight/<backlight>/l5_dark_dim Date: Mai 2011 KernelVersion: 2.6.40 Contact: device-drivers-devel@blackfin.uclinux.org Description: Control the dim brightness for <ambient light zone> on this <backlight>. Values are between 0 and 127, typically set to 0. Full off when the backlight is disabled. This file will also show the dim brightness level stored for this <ambient light zone>. What: /sys/class/backlight/<backlight>/ambient_light_level Date: Mai 2011 KernelVersion: 2.6.40 Contact: device-drivers-devel@blackfin.uclinux.org Description: Get conversion value of the light sensor. This value is updated every 80 ms (when the light sensor is enabled). Returns integer between 0 (dark) and 8000 (max ambient brightness) What: /sys/class/backlight/<backlight>/ambient_light_zone Date: Mai 2011 KernelVersion: 2.6.40 Contact: device-drivers-devel@blackfin.uclinux.org Description: Get/Set current ambient light zone. Reading returns integer between 1..5 (1 = daylight, 2 = bright, ..., 5 = dark). Writing a value between 1..5 forces the backlight controller to enter the corresponding ambient light zone. Writing 0 returns to normal/automatic ambient light level operation. The ambient light sensing feature on these devices is an extension to the API documented in Documentation/ABI/stable/sysfs-class-backlight. It can be enabled by writing the value stored in /sys/class/backlight/<backlight>/max_brightness to /sys/class/backlight/<backlight>/brightness. No newline at end of file Documentation/Changes +18 −25 Original line number Original line Diff line number Diff line Loading @@ -2,13 +2,7 @@ Intro ===== ===== This document is designed to provide a list of the minimum levels of This document is designed to provide a list of the minimum levels of software necessary to run the 2.6 kernels, as well as provide brief software necessary to run the 3.0 kernels. instructions regarding any other "Gotchas" users may encounter when trying life on the Bleeding Edge. If upgrading from a pre-2.4.x kernel, please consult the Changes file included with 2.4.x kernels for additional information; most of that information will not be repeated here. Basically, this document assumes that your system is already functional and running at least 2.4.x kernels. This document is originally based on my "Changes" file for 2.0.x kernels This document is originally based on my "Changes" file for 2.0.x kernels and therefore owes credit to the same people as that file (Jared Mauch, and therefore owes credit to the same people as that file (Jared Mauch, Loading @@ -22,11 +16,10 @@ Upgrade to at *least* these software revisions before thinking you've encountered a bug! If you're unsure what version you're currently encountered a bug! If you're unsure what version you're currently running, the suggested command should tell you. running, the suggested command should tell you. Again, keep in mind that this list assumes you are already Again, keep in mind that this list assumes you are already functionally functionally running a Linux 2.4 kernel. Also, not all tools are running a Linux kernel. Also, not all tools are necessary on all necessary on all systems; obviously, if you don't have any ISDN systems; obviously, if you don't have any ISDN hardware, for example, hardware, for example, you probably needn't concern yourself with you probably needn't concern yourself with isdn4k-utils. isdn4k-utils. o Gnu C 3.2 # gcc --version o Gnu C 3.2 # gcc --version o Gnu make 3.80 # make --version o Gnu make 3.80 # make --version Loading Loading @@ -114,12 +107,12 @@ Ksymoops If the unthinkable happens and your kernel oopses, you may need the If the unthinkable happens and your kernel oopses, you may need the ksymoops tool to decode it, but in most cases you don't. ksymoops tool to decode it, but in most cases you don't. In the 2.6 kernel it is generally preferred to build the kernel with It is generally preferred to build the kernel with CONFIG_KALLSYMS so CONFIG_KALLSYMS so that it produces readable dumps that can be used as-is that it produces readable dumps that can be used as-is (this also (this also produces better output than ksymoops). produces better output than ksymoops). If for some reason your kernel If for some reason your kernel is not build with CONFIG_KALLSYMS and is not build with CONFIG_KALLSYMS and you have no way to rebuild and you have no way to rebuild and reproduce the Oops with that option, then reproduce the Oops with that option, then you can still decode that Oops you can still decode that Oops with ksymoops. with ksymoops. Module-Init-Tools Module-Init-Tools ----------------- ----------------- Loading Loading @@ -261,8 +254,8 @@ needs to be recompiled or (preferably) upgraded. NFS-utils NFS-utils --------- --------- In 2.4 and earlier kernels, the nfs server needed to know about any In ancient (2.4 and earlier) kernels, the nfs server needed to know client that expected to be able to access files via NFS. This about any client that expected to be able to access files via NFS. This information would be given to the kernel by "mountd" when the client information would be given to the kernel by "mountd" when the client mounted the filesystem, or by "exportfs" at system startup. exportfs mounted the filesystem, or by "exportfs" at system startup. exportfs would take information about active clients from /var/lib/nfs/rmtab. would take information about active clients from /var/lib/nfs/rmtab. Loading @@ -272,11 +265,11 @@ which is not always easy, particularly when trying to implement fail-over. Even when the system is working well, rmtab suffers from fail-over. Even when the system is working well, rmtab suffers from getting lots of old entries that never get removed. getting lots of old entries that never get removed. With 2.6 we have the option of having the kernel tell mountd when it With modern kernels we have the option of having the kernel tell mountd gets a request from an unknown host, and mountd can give appropriate when it gets a request from an unknown host, and mountd can give export information to the kernel. This removes the dependency on appropriate export information to the kernel. This removes the rmtab and means that the kernel only needs to know about currently dependency on rmtab and means that the kernel only needs to know about active clients. currently active clients. To enable this new functionality, you need to: To enable this new functionality, you need to: Loading Documentation/CodingStyle +2 −2 Original line number Original line Diff line number Diff line Loading @@ -680,8 +680,8 @@ ones already enabled by DEBUG. Chapter 14: Allocating memory Chapter 14: Allocating memory The kernel provides the following general purpose memory allocators: The kernel provides the following general purpose memory allocators: kmalloc(), kzalloc(), kcalloc(), and vmalloc(). Please refer to the API kmalloc(), kzalloc(), kcalloc(), vmalloc(), and vzalloc(). Please refer to documentation for further information about them. the API documentation for further information about them. The preferred form for passing a size of a struct is the following: The preferred form for passing a size of a struct is the following: Loading Documentation/accounting/cgroupstats.txt +2 −2 Original line number Original line Diff line number Diff line Loading @@ -21,7 +21,7 @@ information will not be available. To extract cgroup statistics a utility very similar to getdelays.c To extract cgroup statistics a utility very similar to getdelays.c has been developed, the sample output of the utility is shown below has been developed, the sample output of the utility is shown below ~/balbir/cgroupstats # ./getdelays -C "/cgroup/a" ~/balbir/cgroupstats # ./getdelays -C "/sys/fs/cgroup/a" sleeping 1, blocked 0, running 1, stopped 0, uninterruptible 0 sleeping 1, blocked 0, running 1, stopped 0, uninterruptible 0 ~/balbir/cgroupstats # ./getdelays -C "/cgroup" ~/balbir/cgroupstats # ./getdelays -C "/sys/fs/cgroup" sleeping 155, blocked 0, running 1, stopped 0, uninterruptible 2 sleeping 155, blocked 0, running 1, stopped 0, uninterruptible 2 Loading
CREDITS +8 −0 Original line number Original line Diff line number Diff line Loading @@ -518,6 +518,14 @@ N: Zach Brown E: zab@zabbo.net E: zab@zabbo.net D: maestro pci sound D: maestro pci sound N: David Brownell D: Kernel engineer, mentor, and friend. Maintained USB EHCI and D: gadget layers, SPI subsystem, GPIO subsystem, and more than a few D: device drivers. His encouragement also helped many engineers get D: started working on the Linux kernel. David passed away in early D: 2011, and will be greatly missed. W: https://lkml.org/lkml/2011/4/5/36 N: Gary Brubaker N: Gary Brubaker E: xavyer@ix.netcom.com E: xavyer@ix.netcom.com D: USB Serial Empeg Empeg-car Mark I/II Driver D: USB Serial Empeg Empeg-car Mark I/II Driver Loading
Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 0 → 100644 +56 −0 Original line number Original line Diff line number Diff line What: /sys/class/backlight/<backlight>/<ambient light zone>_max What: /sys/class/backlight/<backlight>/l1_daylight_max What: /sys/class/backlight/<backlight>/l2_bright_max What: /sys/class/backlight/<backlight>/l3_office_max What: /sys/class/backlight/<backlight>/l4_indoor_max What: /sys/class/backlight/<backlight>/l5_dark_max Date: Mai 2011 KernelVersion: 2.6.40 Contact: device-drivers-devel@blackfin.uclinux.org Description: Control the maximum brightness for <ambient light zone> on this <backlight>. Values are between 0 and 127. This file will also show the brightness level stored for this <ambient light zone>. What: /sys/class/backlight/<backlight>/<ambient light zone>_dim What: /sys/class/backlight/<backlight>/l2_bright_dim What: /sys/class/backlight/<backlight>/l3_office_dim What: /sys/class/backlight/<backlight>/l4_indoor_dim What: /sys/class/backlight/<backlight>/l5_dark_dim Date: Mai 2011 KernelVersion: 2.6.40 Contact: device-drivers-devel@blackfin.uclinux.org Description: Control the dim brightness for <ambient light zone> on this <backlight>. Values are between 0 and 127, typically set to 0. Full off when the backlight is disabled. This file will also show the dim brightness level stored for this <ambient light zone>. What: /sys/class/backlight/<backlight>/ambient_light_level Date: Mai 2011 KernelVersion: 2.6.40 Contact: device-drivers-devel@blackfin.uclinux.org Description: Get conversion value of the light sensor. This value is updated every 80 ms (when the light sensor is enabled). Returns integer between 0 (dark) and 8000 (max ambient brightness) What: /sys/class/backlight/<backlight>/ambient_light_zone Date: Mai 2011 KernelVersion: 2.6.40 Contact: device-drivers-devel@blackfin.uclinux.org Description: Get/Set current ambient light zone. Reading returns integer between 1..5 (1 = daylight, 2 = bright, ..., 5 = dark). Writing a value between 1..5 forces the backlight controller to enter the corresponding ambient light zone. Writing 0 returns to normal/automatic ambient light level operation. The ambient light sensing feature on these devices is an extension to the API documented in Documentation/ABI/stable/sysfs-class-backlight. It can be enabled by writing the value stored in /sys/class/backlight/<backlight>/max_brightness to /sys/class/backlight/<backlight>/brightness. No newline at end of file
Documentation/Changes +18 −25 Original line number Original line Diff line number Diff line Loading @@ -2,13 +2,7 @@ Intro ===== ===== This document is designed to provide a list of the minimum levels of This document is designed to provide a list of the minimum levels of software necessary to run the 2.6 kernels, as well as provide brief software necessary to run the 3.0 kernels. instructions regarding any other "Gotchas" users may encounter when trying life on the Bleeding Edge. If upgrading from a pre-2.4.x kernel, please consult the Changes file included with 2.4.x kernels for additional information; most of that information will not be repeated here. Basically, this document assumes that your system is already functional and running at least 2.4.x kernels. This document is originally based on my "Changes" file for 2.0.x kernels This document is originally based on my "Changes" file for 2.0.x kernels and therefore owes credit to the same people as that file (Jared Mauch, and therefore owes credit to the same people as that file (Jared Mauch, Loading @@ -22,11 +16,10 @@ Upgrade to at *least* these software revisions before thinking you've encountered a bug! If you're unsure what version you're currently encountered a bug! If you're unsure what version you're currently running, the suggested command should tell you. running, the suggested command should tell you. Again, keep in mind that this list assumes you are already Again, keep in mind that this list assumes you are already functionally functionally running a Linux 2.4 kernel. Also, not all tools are running a Linux kernel. Also, not all tools are necessary on all necessary on all systems; obviously, if you don't have any ISDN systems; obviously, if you don't have any ISDN hardware, for example, hardware, for example, you probably needn't concern yourself with you probably needn't concern yourself with isdn4k-utils. isdn4k-utils. o Gnu C 3.2 # gcc --version o Gnu C 3.2 # gcc --version o Gnu make 3.80 # make --version o Gnu make 3.80 # make --version Loading Loading @@ -114,12 +107,12 @@ Ksymoops If the unthinkable happens and your kernel oopses, you may need the If the unthinkable happens and your kernel oopses, you may need the ksymoops tool to decode it, but in most cases you don't. ksymoops tool to decode it, but in most cases you don't. In the 2.6 kernel it is generally preferred to build the kernel with It is generally preferred to build the kernel with CONFIG_KALLSYMS so CONFIG_KALLSYMS so that it produces readable dumps that can be used as-is that it produces readable dumps that can be used as-is (this also (this also produces better output than ksymoops). produces better output than ksymoops). If for some reason your kernel If for some reason your kernel is not build with CONFIG_KALLSYMS and is not build with CONFIG_KALLSYMS and you have no way to rebuild and you have no way to rebuild and reproduce the Oops with that option, then reproduce the Oops with that option, then you can still decode that Oops you can still decode that Oops with ksymoops. with ksymoops. Module-Init-Tools Module-Init-Tools ----------------- ----------------- Loading Loading @@ -261,8 +254,8 @@ needs to be recompiled or (preferably) upgraded. NFS-utils NFS-utils --------- --------- In 2.4 and earlier kernels, the nfs server needed to know about any In ancient (2.4 and earlier) kernels, the nfs server needed to know client that expected to be able to access files via NFS. This about any client that expected to be able to access files via NFS. This information would be given to the kernel by "mountd" when the client information would be given to the kernel by "mountd" when the client mounted the filesystem, or by "exportfs" at system startup. exportfs mounted the filesystem, or by "exportfs" at system startup. exportfs would take information about active clients from /var/lib/nfs/rmtab. would take information about active clients from /var/lib/nfs/rmtab. Loading @@ -272,11 +265,11 @@ which is not always easy, particularly when trying to implement fail-over. Even when the system is working well, rmtab suffers from fail-over. Even when the system is working well, rmtab suffers from getting lots of old entries that never get removed. getting lots of old entries that never get removed. With 2.6 we have the option of having the kernel tell mountd when it With modern kernels we have the option of having the kernel tell mountd gets a request from an unknown host, and mountd can give appropriate when it gets a request from an unknown host, and mountd can give export information to the kernel. This removes the dependency on appropriate export information to the kernel. This removes the rmtab and means that the kernel only needs to know about currently dependency on rmtab and means that the kernel only needs to know about active clients. currently active clients. To enable this new functionality, you need to: To enable this new functionality, you need to: Loading
Documentation/CodingStyle +2 −2 Original line number Original line Diff line number Diff line Loading @@ -680,8 +680,8 @@ ones already enabled by DEBUG. Chapter 14: Allocating memory Chapter 14: Allocating memory The kernel provides the following general purpose memory allocators: The kernel provides the following general purpose memory allocators: kmalloc(), kzalloc(), kcalloc(), and vmalloc(). Please refer to the API kmalloc(), kzalloc(), kcalloc(), vmalloc(), and vzalloc(). Please refer to documentation for further information about them. the API documentation for further information about them. The preferred form for passing a size of a struct is the following: The preferred form for passing a size of a struct is the following: Loading
Documentation/accounting/cgroupstats.txt +2 −2 Original line number Original line Diff line number Diff line Loading @@ -21,7 +21,7 @@ information will not be available. To extract cgroup statistics a utility very similar to getdelays.c To extract cgroup statistics a utility very similar to getdelays.c has been developed, the sample output of the utility is shown below has been developed, the sample output of the utility is shown below ~/balbir/cgroupstats # ./getdelays -C "/cgroup/a" ~/balbir/cgroupstats # ./getdelays -C "/sys/fs/cgroup/a" sleeping 1, blocked 0, running 1, stopped 0, uninterruptible 0 sleeping 1, blocked 0, running 1, stopped 0, uninterruptible 0 ~/balbir/cgroupstats # ./getdelays -C "/cgroup" ~/balbir/cgroupstats # ./getdelays -C "/sys/fs/cgroup" sleeping 155, blocked 0, running 1, stopped 0, uninterruptible 2 sleeping 155, blocked 0, running 1, stopped 0, uninterruptible 2
