[netdrvr starfire] Add GPL'd firmware, remove compat code (fdecea66) · Commits · e / devices / android_kernel_oneplus_sm8150

drivers/net/starfire.c

+40 −102

Original line number	Diff line number	Diff line
		@@ -2,7 +2,7 @@
		/*
		Written 1998-2000 by Donald Becker.

		Current maintainer is Ion Badulescu <ionut@cs.columbia.edu>. Please
		Current maintainer is Ion Badulescu <ionut ta badula tod org>. Please
		send all bug reports to me, and not to Donald Becker, as this code
		has been heavily modified from Donald's original version.

		@@ -129,12 +129,18 @@
		- put the chip to a D3 slumber on driver unload
		- added config option to enable/disable NAPI

		TODO: bugfixes (no bugs known as of right now)
		LK1.4.2 (Ion Badulescu)
		- finally added firmware (GPL'ed by Adaptec)
		- removed compatibility code for 2.2.x

		TODO: - fix forced speed/duplexing code (broken a long time ago, when
		somebody converted the driver to use the generic MII code)
		- fix VLAN support
		*/

		#define DRV_NAME "starfire"
		#define DRV_VERSION "1.03+LK1.4.1"
		#define DRV_RELDATE "February 10, 2002"
		#define DRV_VERSION "1.03+LK1.4.2"
		#define DRV_RELDATE "January 19, 2005"

		#include <linux/config.h>
		#include <linux/version.h>
		@@ -145,25 +151,15 @@ TODO: bugfixes (no bugs known as of right now)
		#include <linux/etherdevice.h>
		#include <linux/init.h>
		#include <linux/delay.h>
		#include <linux/crc32.h>
		#include <linux/ethtool.h>
		#include <linux/mii.h>
		#include <linux/if_vlan.h>
		#include <asm/processor.h> /* Processor type for cache alignment. */
		#include <asm/uaccess.h>
		#include <asm/io.h>

		/*
		* Adaptec's license for their drivers (which is where I got the
		* firmware files) does not allow one to redistribute them. Thus, we can't
		* include the firmware with this driver.
		*
		* However, should a legal-to-distribute firmware become available,
		* the driver developer would need only to obtain the firmware in the
		* form of a C header file.
		* Once that's done, the #undef below must be changed into a #define
		* for this driver to really use the firmware. Note that Rx/Tx
		* hardware TCP checksumming is not possible without the firmware.
		*
		* WANTED: legal firmware to include with this GPL'd driver.
		*/
		#undef HAS_FIRMWARE
		#include "starfire_firmware.h"
		/*
		* The current frame processor firmware fails to checksum a fragment
		* of length 1. If and when this is fixed, the #define below can be removed.
		@@ -172,13 +168,7 @@ TODO: bugfixes (no bugs known as of right now)
		/*
		* Define this if using the driver with the zero-copy patch
		*/
		#if defined(HAS_FIRMWARE) && defined(MAX_SKB_FRAGS)
		#define ZEROCOPY
		#endif

		#ifdef HAS_FIRMWARE
		#include "starfire_firmware.h"
		#endif /* HAS_FIRMWARE */

		#if defined(CONFIG_VLAN_8021Q) \|\| defined(CONFIG_VLAN_8021Q_MODULE)
		#define VLAN_SUPPORT
		@@ -202,11 +192,7 @@ static int mtu;
		The Starfire has a 512 element hash table based on the Ethernet CRC. */
		static int multicast_filter_limit = 512;
		/* Whether to do TCP/UDP checksums in hardware */
		#ifdef HAS_FIRMWARE
		static int enable_hw_cksum = 1;
		#else
		static int enable_hw_cksum = 0;
		#endif

		#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
		/*
		@@ -291,43 +277,15 @@ static int full_duplex[MAX_UNITS] = {0, };
		#define RX_DESC_ADDR_SIZE RxDescAddr32bit
		#endif

		#ifdef MAX_SKB_FRAGS
		#define skb_first_frag_len(skb) skb_headlen(skb)
		#define skb_num_frags(skb) (skb_shinfo(skb)->nr_frags + 1)
		#else /* not MAX_SKB_FRAGS */
		#define skb_first_frag_len(skb) (skb->len)
		#define skb_num_frags(skb) 1
		#endif /* not MAX_SKB_FRAGS */

		/* 2.2.x compatibility code */
		#if LINUX_VERSION_CODE < 0x20300

		#include "starfire-kcomp22.h"

		#else /* LINUX_VERSION_CODE > 0x20300 */

		#include <linux/crc32.h>
		#include <linux/ethtool.h>
		#include <linux/mii.h>

		#include <linux/if_vlan.h>

		#define init_tx_timer(dev, func, timeout) \
		dev->tx_timeout = func; \
		dev->watchdog_timeo = timeout;
		#define kick_tx_timer(dev, func, timeout)

		#define netif_start_if(dev)
		#define netif_stop_if(dev)

		#define PCI_SLOT_NAME(pci_dev) pci_name(pci_dev)

		#endif /* LINUX_VERSION_CODE > 0x20300 */

		#ifdef HAVE_NETDEV_POLL
		#define init_poll(dev) \
		do { \
		dev->poll = &netdev_poll; \
		dev->weight = max_interrupt_work;
		dev->weight = max_interrupt_work; \
		} while (0)
		#define netdev_rx(dev, ioaddr) \
		do { \
		u32 intr_enable; \
		@@ -341,7 +299,7 @@ do { \
		/* Paranoia check */ \
		intr_enable = readl(ioaddr + IntrEnable); \
		if (intr_enable & (IntrRxDone \| IntrRxEmpty)) { \
		printk("%s: interrupt while in polling mode!\n", dev->name); \
		printk(KERN_INFO "%s: interrupt while in polling mode!\n", dev->name); \
		intr_enable &= ~(IntrRxDone \| IntrRxEmpty); \
		writel(intr_enable, ioaddr + IntrEnable); \
		} \
		@@ -371,6 +329,7 @@ KERN_INFO " (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELD
		MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
		MODULE_DESCRIPTION("Adaptec Starfire Ethernet driver");
		MODULE_LICENSE("GPL");
		MODULE_VERSION(DRV_VERSION);

		module_param(max_interrupt_work, int, 0);
		module_param(mtu, int, 0);
		@@ -425,7 +384,7 @@ on the 32/64 bitness of the architecture), and relies on automatic
		minimum-length padding. It does not use the completion queue
		consumer index, but instead checks for non-zero status entries.

		For receive this driver uses type 0/1/2/3 receive descriptors. The driver
		For receive this driver uses type 2/3 receive descriptors. The driver
		allocates full frame size skbuffs for the Rx ring buffers, so all frames
		should fit in a single descriptor. The driver does not use the completion
		queue consumer index, but instead checks for non-zero status entries.
		@@ -476,7 +435,7 @@ IVc. Errata

		*/




		enum chip_capability_flags {CanHaveMII=1, };

		@@ -670,7 +629,6 @@ struct full_rx_done_desc {
		u32 timestamp;
		};
		/* XXX: this is ugly and I'm not sure it's worth the trouble -Ion */
		#ifdef HAS_FIRMWARE
		#ifdef VLAN_SUPPORT
		typedef struct full_rx_done_desc rx_done_desc;
		#define RxComplType RxComplType3
		@@ -678,15 +636,6 @@ typedef struct full_rx_done_desc rx_done_desc;
		typedef struct csum_rx_done_desc rx_done_desc;
		#define RxComplType RxComplType2
		#endif /* not VLAN_SUPPORT */
		#else /* not HAS_FIRMWARE */
		#ifdef VLAN_SUPPORT
		typedef struct basic_rx_done_desc rx_done_desc;
		#define RxComplType RxComplType1
		#else /* not VLAN_SUPPORT */
		typedef struct short_rx_done_desc rx_done_desc;
		#define RxComplType RxComplType0
		#endif /* not VLAN_SUPPORT */
		#endif /* not HAS_FIRMWARE */

		enum rx_done_bits {
		RxOK=0x20000000, RxFIFOErr=0x10000000, RxBufQ2=0x08000000,
		@@ -898,13 +847,10 @@ static int __devinit starfire_init_one(struct pci_dev *pdev,
		/* enable MWI -- it vastly improves Rx performance on sparc64 */
		pci_set_mwi(pdev);

		#ifdef MAX_SKB_FRAGS
		dev->features \|= NETIF_F_SG;
		#endif /* MAX_SKB_FRAGS */
		#ifdef ZEROCOPY
		/* Starfire can do TCP/UDP checksumming */
		if (enable_hw_cksum)
		dev->features \|= NETIF_F_IP_CSUM;
		dev->features \|= NETIF_F_IP_CSUM \| NETIF_F_SG;
		#endif /* ZEROCOPY */
		#ifdef VLAN_SUPPORT
		dev->features \|= NETIF_F_HW_VLAN_RX \| NETIF_F_HW_VLAN_FILTER;
		@@ -1008,7 +954,8 @@ static int __devinit starfire_init_one(struct pci_dev *pdev,
		/* The chip-specific entries in the device structure. */
		dev->open = &netdev_open;
		dev->hard_start_xmit = &start_tx;
		init_tx_timer(dev, tx_timeout, TX_TIMEOUT);
		dev->tx_timeout = tx_timeout;
		dev->watchdog_timeo = TX_TIMEOUT;
		init_poll(dev);
		dev->stop = &netdev_close;
		dev->get_stats = &get_stats;
		@@ -1039,7 +986,7 @@ static int __devinit starfire_init_one(struct pci_dev *pdev,
		if ((mdio_read(dev, phy, MII_BMCR) & BMCR_RESET) == 0)
		break;
		if (boguscnt == 0) {
		printk("%s: PHY reset never completed!\n", dev->name);
		printk("%s: PHY#%d reset never completed!\n", dev->name, phy);
		continue;
		}
		mii_status = mdio_read(dev, phy, MII_BMSR);
		@@ -1110,6 +1057,7 @@ static int netdev_open(struct net_device *dev)
		size_t tx_done_q_size, rx_done_q_size, tx_ring_size, rx_ring_size;

		/* Do we ever need to reset the chip??? */

		retval = request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev);
		if (retval)
		return retval;
		@@ -1211,7 +1159,6 @@ static int netdev_open(struct net_device *dev)

		writel(np->intr_timer_ctrl, ioaddr + IntrTimerCtrl);

		netif_start_if(dev);
		netif_start_queue(dev);

		if (debug > 1)
		@@ -1238,13 +1185,11 @@ static int netdev_open(struct net_device *dev)
		writel(ETH_P_8021Q, ioaddr + VlanType);
		#endif /* VLAN_SUPPORT */

		#ifdef HAS_FIRMWARE
		/* Load Rx/Tx firmware into the frame processors */
		for (i = 0; i < FIRMWARE_RX_SIZE * 2; i++)
		writel(firmware_rx[i], ioaddr + RxGfpMem + i * 4);
		for (i = 0; i < FIRMWARE_TX_SIZE * 2; i++)
		writel(firmware_tx[i], ioaddr + TxGfpMem + i * 4);
		#endif /* HAS_FIRMWARE */
		if (enable_hw_cksum)
		/* Enable the Rx and Tx units, and the Rx/Tx frame processors. */
		writel(TxEnable\|TxGFPEnable\|RxEnable\|RxGFPEnable, ioaddr + GenCtrl);
		@@ -1378,8 +1323,6 @@ static int start_tx(struct sk_buff skb, struct net_device dev)
		u32 status;
		int i;

		kick_tx_timer(dev, tx_timeout, TX_TIMEOUT);

		/*
		* be cautious here, wrapping the queue has weird semantics
		* and we may not have enough slots even when it seems we do.
		@@ -1404,7 +1347,7 @@ static int start_tx(struct sk_buff skb, struct net_device dev)
		}

		if (has_bad_length)
		skb_checksum_help(skb);
		skb_checksum_help(skb, 0);
		}
		#endif /* ZEROCOPY && HAS_BROKEN_FIRMWARE */

		@@ -1433,12 +1376,10 @@ static int start_tx(struct sk_buff skb, struct net_device dev)
		np->tx_info[entry].mapping =
		pci_map_single(np->pci_dev, skb->data, skb_first_frag_len(skb), PCI_DMA_TODEVICE);
		} else {
		#ifdef MAX_SKB_FRAGS
		skb_frag_t *this_frag = &skb_shinfo(skb)->frags[i - 1];
		status \|= this_frag->size;
		np->tx_info[entry].mapping =
		pci_map_single(np->pci_dev, page_address(this_frag->page) + this_frag->page_offset, this_frag->size, PCI_DMA_TODEVICE);
		#endif /* MAX_SKB_FRAGS */
		}

		np->tx_ring[entry].addr = cpu_to_dma(np->tx_info[entry].mapping);
		@@ -1531,7 +1472,6 @@ static irqreturn_t intr_handler(int irq, void dev_instance, struct pt_regs rgs
		np->tx_info[entry].mapping = 0;
		np->dirty_tx += np->tx_info[entry].used_slots;
		entry = (entry + np->tx_info[entry].used_slots) % TX_RING_SIZE;
		#ifdef MAX_SKB_FRAGS
		{
		int i;
		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
		@@ -1543,7 +1483,7 @@ static irqreturn_t intr_handler(int irq, void dev_instance, struct pt_regs rgs
		entry++;
		}
		}
		#endif /* MAX_SKB_FRAGS */

		dev_kfree_skb_irq(skb);
		}
		np->tx_done_q[np->tx_done].status = 0;
		@@ -1603,7 +1543,7 @@ static int __netdev_rx(struct net_device dev, int quota)
		if (debug > 4)
		printk(KERN_DEBUG " netdev_rx() status of %d was %#8.8x.\n", np->rx_done, desc_status);
		if (!(desc_status & RxOK)) {
		/* There was a error. */
		/* There was an error. */
		if (debug > 2)
		printk(KERN_DEBUG " netdev_rx() Rx error was %#8.8x.\n", desc_status);
		np->stats.rx_errors++;
		@@ -1656,11 +1596,10 @@ static int __netdev_rx(struct net_device dev, int quota)
		#endif

		skb->protocol = eth_type_trans(skb, dev);
		#if defined(HAS_FIRMWARE) \|\| defined(VLAN_SUPPORT)
		#ifdef VLAN_SUPPORT
		if (debug > 4)
		printk(KERN_DEBUG " netdev_rx() status2 of %d was %#4.4x.\n", np->rx_done, le16_to_cpu(desc->status2));
		#endif
		#ifdef HAS_FIRMWARE
		if (le16_to_cpu(desc->status2) & 0x0100) {
		skb->ip_summed = CHECKSUM_UNNECESSARY;
		np->stats.rx_compressed++;
		@@ -1679,7 +1618,6 @@ static int __netdev_rx(struct net_device dev, int quota)
		skb->csum = le16_to_cpu(desc->csum);
		printk(KERN_DEBUG "%s: checksum_hw, status2 = %#x\n", dev->name, le16_to_cpu(desc->status2));
		}
		#endif /* HAS_FIRMWARE */
		#ifdef VLAN_SUPPORT
		if (np->vlgrp && le16_to_cpu(desc->status2) & 0x0200) {
		if (debug > 4)
		@@ -1900,9 +1838,6 @@ static struct net_device_stats get_stats(struct net_device dev)
		}


		/* Chips may use the upper or lower CRC bits, and may reverse and/or invert
		them. Select the endian-ness that results in minimal calculations.
		*/
		static void set_rx_mode(struct net_device *dev)
		{
		struct netdev_private *np = netdev_priv(dev);
		@@ -1969,6 +1904,8 @@ static void set_rx_mode(struct net_device *dev)
		memset(mc_filter, 0, sizeof(mc_filter));
		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
		i++, mclist = mclist->next) {
		/* The chip uses the upper 9 CRC bits
		as index into the hash table */
		int bit_nr = ether_crc_le(ETH_ALEN, mclist->dmi_addr) >> 23;
		__u32 fptr = (__u32 ) &mc_filter[(bit_nr >> 4) & ~1];

		@@ -2001,7 +1938,7 @@ static void get_drvinfo(struct net_device dev, struct ethtool_drvinfo info)
		struct netdev_private *np = netdev_priv(dev);
		strcpy(info->driver, DRV_NAME);
		strcpy(info->version, DRV_VERSION);
		strcpy(info->bus_info, PCI_SLOT_NAME(np->pci_dev));
		strcpy(info->bus_info, pci_name(np->pci_dev));
		}

		static int get_settings(struct net_device dev, struct ethtool_cmd ecmd)
		@@ -2083,7 +2020,6 @@ static int netdev_close(struct net_device *dev)
		int i;

		netif_stop_queue(dev);
		netif_stop_if(dev);

		if (debug > 1) {
		printk(KERN_DEBUG "%s: Shutting down ethercard, Intr status %#8.8x.\n",
		@@ -2184,7 +2120,13 @@ static int __init starfire_init (void)
		/* when a module, this is printed whether or not devices are found in probe */
		#ifdef MODULE
		printk(version);
		#ifdef HAVE_NETDEV_POLL
		printk(KERN_INFO DRV_NAME ": polling (NAPI) enabled\n");
		#else
		printk(KERN_INFO DRV_NAME ": polling (NAPI) disabled\n");
		#endif
		#endif

		#ifndef ADDR_64BITS
		/* we can do this test only at run-time... sigh */
		if (sizeof(dma_addr_t) == sizeof(u64)) {
		@@ -2192,10 +2134,6 @@ static int __init starfire_init (void)
		return -ENODEV;
		}
		#endif /* not ADDR_64BITS */
		#ifndef HAS_FIRMWARE
		/* unconditionally disable hw cksums if firmware is not present */
		enable_hw_cksum = 0;
		#endif /* not HAS_FIRMWARE */
		return pci_module_init (&starfire_driver);
		}

drivers/net/starfire_firmware.h

0 → 100644

+346 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright 2003 Adaptec, Inc.
		*
		* Please read the following license before using the Adaptec Software
		* ("Program"). If you do not agree to the license terms, do not use the
		* Program:
		*
		* You agree to be bound by version 2 of the General Public License ("GPL")
		* dated June 1991, which can be found at http://www.fsf.org/licenses/gpl.html.
		* If the link is broken, write to Free Software Foundation, 59 Temple Place,
		* Boston, Massachusetts 02111-1307.
		*
		* BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE IT IS LICENSED "AS IS" AND
		* THERE IS NO WARRANTY FOR THE PROGRAM, INCLUDING BUT NOT LIMITED TO THE
		* IMPLIED WARRANTIES OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE
		* (TO THE EXTENT PERMITTED BY APPLICABLE LAW). USE OF THE PROGRAM IS AT YOUR
		* OWN RISK. IN NO EVENT WILL ADAPTEC OR ITS LICENSORS BE LIABLE TO YOU FOR
		* DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
		* ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM.
		*
		*/

		static const u32 firmware_rx[] = {
		0x010003dc, 0x00000000,
		0x04000421, 0x00000086,
		0x80000015, 0x0000180e,
		0x81000015, 0x00006664,
		0x1a0040ab, 0x00000b06,
		0x14200011, 0x00000000,
		0x14204022, 0x0000aaaa,
		0x14204022, 0x00000300,
		0x14204022, 0x00000000,
		0x1a0040ab, 0x00000b14,
		0x14200011, 0x00000000,
		0x83000015, 0x00000002,
		0x04000021, 0x00000000,
		0x00000010, 0x00000000,
		0x04000421, 0x00000087,
		0x00000010, 0x00000000,
		0x00000010, 0x00000000,
		0x00008015, 0x00000000,
		0x0000003e, 0x00000000,
		0x00000010, 0x00000000,
		0x82000015, 0x00004000,
		0x009e8050, 0x00000000,
		0x03008015, 0x00000000,
		0x86008015, 0x00000000,
		0x82000015, 0x00008000,
		0x0100001c, 0x00000000,
		0x000050a0, 0x0000010c,
		0x4e20d011, 0x00006008,
		0x1420d012, 0x00004008,
		0x0000f090, 0x00007000,
		0x0000c8b0, 0x00003000,
		0x00004040, 0x00000000,
		0x00108015, 0x00000000,
		0x00a2c150, 0x00004000,
		0x00a400b0, 0x00000014,
		0x00000020, 0x00000000,
		0x2500400d, 0x00002525,
		0x00047220, 0x00003100,
		0x00934070, 0x00000000,
		0x00000020, 0x00000000,
		0x00924460, 0x00000184,
		0x2b20c011, 0x00000000,
		0x0000c420, 0x00000540,
		0x36014018, 0x0000422d,
		0x14200011, 0x00000000,
		0x00924460, 0x00000183,
		0x3200001f, 0x00000034,
		0x02ac0015, 0x00000002,
		0x00a60110, 0x00000008,
		0x42200011, 0x00000000,
		0x00924060, 0x00000103,
		0x0000001e, 0x00000000,
		0x00000020, 0x00000100,
		0x0000001e, 0x00000000,
		0x00924460, 0x00000086,
		0x00004080, 0x00000000,
		0x0092c070, 0x00000000,
		0x00924060, 0x00000100,
		0x0000c890, 0x00005000,
		0x00a6c110, 0x00000000,
		0x00b0c090, 0x00000012,
		0x021c0015, 0x00000000,
		0x3200001f, 0x00000034,
		0x00924460, 0x00000510,
		0x44210011, 0x00000000,
		0x42000011, 0x00000000,
		0x83000015, 0x00000040,
		0x00924460, 0x00000508,
		0x45014018, 0x00004545,
		0x00808050, 0x00000000,
		0x62208012, 0x00000000,
		0x82000015, 0x00000800,
		0x15200011, 0x00000000,
		0x00000010, 0x00000000,
		0x00000010, 0x00000000,
		0x00000010, 0x00000000,
		0x00000010, 0x00000000,
		0x00000010, 0x00000000,
		0x80000015, 0x0000eea4,
		0x81000015, 0x0000005f,
		0x00000060, 0x00000000,
		0x00004120, 0x00000000,
		0x00004a00, 0x00004000,
		0x00924460, 0x00000190,
		0x5601401a, 0x00005956,
		0x14000011, 0x00000000,
		0x00934050, 0x00000018,
		0x00930050, 0x00000018,
		0x3601403a, 0x0000002d,
		0x000643a9, 0x00000000,
		0x0000c420, 0x00000140,
		0x5601401a, 0x00005956,
		0x14000011, 0x00000000,
		0x00000010, 0x00000000,
		0x00000010, 0x00000000,
		0x000642a9, 0x00000000,
		0x00024420, 0x00000183,
		0x5601401a, 0x00005956,
		0x82000015, 0x00002000,
		0x15200011, 0x00000000,
		0x82000015, 0x00000010,
		0x15200011, 0x00000000,
		0x82000015, 0x00000010,
		0x15200011, 0x00000000,
		}; /* 104 Rx instructions */
		#define FIRMWARE_RX_SIZE 104

		static const u32 firmware_tx[] = {
		0x010003dc, 0x00000000,
		0x04000421, 0x00000086,
		0x80000015, 0x0000180e,
		0x81000015, 0x00006664,
		0x1a0040ab, 0x00000b06,
		0x14200011, 0x00000000,
		0x14204022, 0x0000aaaa,
		0x14204022, 0x00000300,
		0x14204022, 0x00000000,
		0x1a0040ab, 0x00000b14,
		0x14200011, 0x00000000,
		0x83000015, 0x00000002,
		0x04000021, 0x00000000,
		0x00000010, 0x00000000,
		0x04000421, 0x00000087,
		0x00000010, 0x00000000,
		0x00000010, 0x00000000,
		0x00008015, 0x00000000,
		0x0000003e, 0x00000000,
		0x00000010, 0x00000000,
		0x82000015, 0x00004000,
		0x009e8050, 0x00000000,
		0x03008015, 0x00000000,
		0x86008015, 0x00000000,
		0x82000015, 0x00008000,
		0x0100001c, 0x00000000,
		0x000050a0, 0x0000010c,
		0x4e20d011, 0x00006008,
		0x1420d012, 0x00004008,
		0x0000f090, 0x00007000,
		0x0000c8b0, 0x00003000,
		0x00004040, 0x00000000,
		0x00108015, 0x00000000,
		0x00a2c150, 0x00004000,
		0x00a400b0, 0x00000014,
		0x00000020, 0x00000000,
		0x2500400d, 0x00002525,
		0x00047220, 0x00003100,
		0x00934070, 0x00000000,
		0x00000020, 0x00000000,
		0x00924460, 0x00000184,
		0x2b20c011, 0x00000000,
		0x0000c420, 0x00000540,
		0x36014018, 0x0000422d,
		0x14200011, 0x00000000,
		0x00924460, 0x00000183,
		0x3200001f, 0x00000034,
		0x02ac0015, 0x00000002,
		0x00a60110, 0x00000008,
		0x42200011, 0x00000000,
		0x00924060, 0x00000103,
		0x0000001e, 0x00000000,
		0x00000020, 0x00000100,
		0x0000001e, 0x00000000,
		0x00924460, 0x00000086,
		0x00004080, 0x00000000,
		0x0092c070, 0x00000000,
		0x00924060, 0x00000100,
		0x0000c890, 0x00005000,
		0x00a6c110, 0x00000000,
		0x00b0c090, 0x00000012,
		0x021c0015, 0x00000000,
		0x3200001f, 0x00000034,
		0x00924460, 0x00000510,
		0x44210011, 0x00000000,
		0x42000011, 0x00000000,
		0x83000015, 0x00000040,
		0x00924460, 0x00000508,
		0x45014018, 0x00004545,
		0x00808050, 0x00000000,
		0x62208012, 0x00000000,
		0x82000015, 0x00000800,
		0x15200011, 0x00000000,
		0x00000010, 0x00000000,
		0x00000010, 0x00000000,
		0x00000010, 0x00000000,
		0x00000010, 0x00000000,
		0x00000010, 0x00000000,
		0x80000015, 0x0000eea4,
		0x81000015, 0x0000005f,
		0x00000060, 0x00000000,
		0x00004120, 0x00000000,
		0x00004a00, 0x00004000,
		0x00924460, 0x00000190,
		0x5601401a, 0x00005956,
		0x14000011, 0x00000000,
		0x00934050, 0x00000018,
		0x00930050, 0x00000018,
		0x3601403a, 0x0000002d,
		0x000643a9, 0x00000000,
		0x0000c420, 0x00000140,
		0x5601401a, 0x00005956,
		0x14000011, 0x00000000,
		0x00000010, 0x00000000,
		0x00000010, 0x00000000,
		0x000642a9, 0x00000000,
		0x00024420, 0x00000183,
		0x5601401a, 0x00005956,
		0x82000015, 0x00002000,
		0x15200011, 0x00000000,
		0x82000015, 0x00000010,
		0x15200011, 0x00000000,
		0x82000015, 0x00000010,
		0x15200011, 0x00000000,
		}; /* 104 Tx instructions */
		#define FIRMWARE_TX_SIZE 104
		#if 0
		static const u32 firmware_wol[] = {
		0x010003dc, 0x00000000,
		0x19000421, 0x00000087,
		0x80000015, 0x00001a1a,
		0x81000015, 0x00001a1a,
		0x1a0040ab, 0x00000b06,
		0x15200011, 0x00000000,
		0x15204022, 0x0000aaaa,
		0x15204022, 0x00000300,
		0x15204022, 0x00000000,
		0x1a0040ab, 0x00000b15,
		0x15200011, 0x00000000,
		0x83000015, 0x00000002,
		0x04000021, 0x00000000,
		0x00000010, 0x00000000,
		0x04000421, 0x00000087,
		0x00000010, 0x00000000,
		0x00000010, 0x00000000,
		0x00008015, 0x00000000,
		0x0000003e, 0x00000000,
		0x00000010, 0x00000000,
		0x00000010, 0x00000000,
		0x82000015, 0x00004000,
		0x82000015, 0x00008000,
		0x0000000c, 0x00000000,
		0x00000010, 0x00000000,
		0x00004080, 0x00000100,
		0x1f20c011, 0x00001122,
		0x2720f011, 0x00003011,
		0x19200071, 0x00000000,
		0x1a200051, 0x00000000,
		0x00000010, 0x00000000,
		0x00000010, 0x00000000,
		0x1d2040a4, 0x00003344,
		0x1d2040a2, 0x00005566,
		0x000040a0, 0x00000100,
		0x00108050, 0x00000001,
		0x1a208012, 0x00000006,
		0x82000015, 0x00008080,
		0x010003dc, 0x00000000,
		0x1d2040a4, 0x00002233,
		0x1d2040a4, 0x00004455,
		0x2d208011, 0x00000005,
		0x1d2040a4, 0x00006611,
		0x00108050, 0x00000001,
		0x27200011, 0x00000000,
		0x1d2050a4, 0x00006600,
		0x82000015, 0x00008080,
		0x010003dc, 0x00000000,
		0x00000050, 0x00000000,
		0x1b200031, 0x00000000,
		0x0000001e, 0x00000000,
		0x0000001e, 0x00000000,
		0x0000001e, 0x00000000,
		0x0000001e, 0x00000000,
		0x00924460, 0x00000086,
		0x00004080, 0x00000000,
		0x0092c070, 0x00000000,
		0x00924060, 0x00000100,
		0x0000c890, 0x00005000,
		0x00a6c110, 0x00000000,
		0x00b0c090, 0x00000012,
		0x021c0015, 0x00000000,
		0x3200001f, 0x00000034,
		0x00924460, 0x00000510,
		0x44210011, 0x00000000,
		0x42000011, 0x00000000,
		0x83000015, 0x00000040,
		0x00924460, 0x00000508,
		0x476a0012, 0x00000100,
		0x83000015, 0x00000008,
		0x16200011, 0x00000000,
		0x001e8050, 0x00000000,
		0x001e8050, 0x00000000,
		0x00808050, 0x00000000,
		0x03008015, 0x00000000,
		0x62208012, 0x00000000,
		0x82000015, 0x00000800,
		0x16200011, 0x00000000,
		0x80000015, 0x0000eea4,
		0x81000015, 0x0000005f,
		0x00000020, 0x00000000,
		0x00004120, 0x00000000,
		0x00004a00, 0x00004000,
		0x00924460, 0x00000190,
		0x5c01401a, 0x0000595c,
		0x15000011, 0x00000000,
		0x00934050, 0x00000018,
		0x00930050, 0x00000018,
		0x3601403a, 0x0000002d,
		0x00064029, 0x00000000,
		0x0000c420, 0x00000140,
		0x5c01401a, 0x0000595c,
		0x15000011, 0x00000000,
		0x00000010, 0x00000000,
		0x00000010, 0x00000000,
		0x00064029, 0x00000000,
		0x00024420, 0x00000183,
		0x5c01401a, 0x0000595c,
		0x82000015, 0x00002000,
		0x16200011, 0x00000000,
		0x82000015, 0x00000010,
		0x16200011, 0x00000000,
		0x82000015, 0x00000010,
		0x16200011, 0x00000000,
		}; /* 104 WoL instructions */
		#define FIRMWARE_WOL_SIZE 104
		#endif