Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit f018583f authored by Om Parkash's avatar Om Parkash
Browse files

ARM: dts: msm: Add DTSi entry for IRLED for QCS610 



Add DTSi entry for IR LED and IR-Cut Filter for QCS610.

Change-Id: I41d69f2f067b9a08483e3e9952ed3636bb5c44c8
Signed-off-by: default avatarOm Parkash <oparkash@codeaurora.org>
parent 4c16f4bd

Documentation/devicetree/bindings/media/video/msm-cam-cci.txt

+81 −0
Original line number Diff line number Diff line
@@ -711,6 +711,64 @@ OIS MODULE 
  Definition: This property is required if the clk is shared clk between different

	sensor and ois, if this device need to be opened together.



=============================

IRLED MODULE

=============================



- compatible

  Usage: required

  Value type: <string>

  Definition: Should be "qcom,camera-ir-led".



- cell-index: cci hardware core index

  Usage: required

  Value type: <u32>

  Definition: Should specify the Hardware index id.



- reg

  Usage: required

  Value type: <u32>

  Definition: offset and length of the register set

	for the device for the cci operating in

	compatible mode.



- pwms

  Usage: optional

  Value type: <phandle>

  Definition: should contain phandle to pwm node used for IRLED



- pinctrl-names

  Usage: required

  Value type: <string>

  Definition: List of names to assign the shared pin state defined in pinctrl device node



- pinctrl-<0..n>

  Usage: required

  Value type: <phandle>

  Definition: Lists phandles each pointing to the pin configuration node within a pin



- gpios

  Usage: required

  Value type: <phandle>

  Definition: should contain phandle to gpio controller node and array of

	#gpio-cells specifying specific gpio (controller specific)



- gpio-req-tbl-num

  Usage: required

  Value type: <u32>

  Definition: should specify the gpio table index.



- gpio-req-tbl-flags

  Usage: required

  Value type: <u32>

  Definition: should specify the gpio functions.



- gpio-req-tbl-label

  Usage: required

  Value type: <string>

  Definition: should specify the gpio labels in

	gpio-req-tbl-num property (in the same order)



Example:

&soc {

    led_flash0: qcom,camera-flash@0 {
@@ -721,6 +779,29 @@ Example: 
         switch-source = <&pmi8998_switch>;

         status = "ok";

    };



    ir_led: camera-ir-led@0 {

         cell-index = <0>;

         reg = <0x00>;

         compatible = "qcom,camera-ir-led";

         pwms = <&pm6150l_pwm_1  0 0>;



         enable-active-high;

         pinctrl-names = "default", "cam_default", "cam_suspend";

         pinctrl-0 = <&irled_pwm>;

         pinctrl-1 = <&cam_sensor_ir_cut_on>;

         pinctrl-2 = <&cam_sensor_ir_cut_off>;

         gpios = <&tlmm 73 0>,

                 <&tlmm 74 0>;

         qcom,gpio-ir-p = <0>;

         qcom,gpio-ir-m =  <1>;

         qcom,gpio-req-tbl-num = <0 1>;

         qcom,gpio-req-tbl-flags = <0 0>;

         qcom,gpio-req-tbl-label = "IR_CUT_FILTER_P",

                                   "IR_CUT_FILTER_M";

         gpio-no-mux = <0>;

         status = "ok";

    };

};



&cam_cci0 {

arch/arm64/boot/dts/qcom/qcs610-camera-sensor-idp.dtsi

+23 −0
Original line number Diff line number Diff line
@@ -12,6 +12,28 @@ 
 */



&soc {

	ir_led: camera-ir-led@0 {

		cell-index = <0>;

		reg = <0x00>;

		compatible = "qcom,camera-ir-led";

		pwms = <&pm6150l_pwm_1  0 0>;

		enable-active-high;

		pinctrl-names = "default", "cam_default", "cam_suspend";

		pinctrl-0 = <&irled_pwm>;

		pinctrl-1 = <&cam_sensor_ir_cut_on>;

		pinctrl-2 = <&cam_sensor_ir_cut_off>;

		gpios = <&tlmm 73 0>,

			<&tlmm 74 0>;

		qcom,gpio-ir-p = <0>;

		qcom,gpio-ir-m =  <1>;

		qcom,gpio-req-tbl-num = <0 1>;

		qcom,gpio-req-tbl-flags = <0 0>;

		qcom,gpio-req-tbl-label = "IR_CUT_FILTER_P",

				"IR_CUT_FILTER_M";

		gpio-no-mux = <0>;

		status = "ok";

	};



	camera_ldo: gpio-regulator@0 {

		compatible = "regulator-fixed";

		reg = <0x00 0x00>;
@@ -45,6 +67,7 @@ 
		cam_vana-supply = <&pm6150l_l4>;

		cam_vdig-supply = <&camera_ldo>;

		cam_clk-supply = <&titan_top_gdsc>;

		ir-led-src = <&ir_led>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

arch/arm64/boot/dts/qcom/sm6150-pinctrl.dtsi

+29 −0
Original line number Diff line number Diff line
@@ -1678,6 +1678,35 @@ 
				};

			};

		};



		cam_sensor_ir_cut_on: cam_sensor_ir_led_on {

			/*IR_LED*/

			mux {

				pins = "gpio73", "gpio74";

				function = "gpio";

			};



			config {

				pins = "gpio73", "gpio74";

				bias-disable; /* No PULL */

				drive-strength = <2>; /* 2 MA */

			};

		};



		cam_sensor_ir_cut_off: cam_sensor_ir_led_off {

			/*IR_LED*/

			mux {

				pins = "gpio73", "gpio74";

				function = "gpio";

			};



			config {

				pins = "gpio73", "gpio74";

				bias-pull-down; /* PULL DOWN */

				drive-strength = <2>; /* 2 MA */

			};

		};



		emac {

			emac_mdc: emac_mdc {

				mux {