Documentation: Add DT bindings for camera modules (ed6e72a0) · Commits · e / devices / android_kernel_oneplus_sm8150

Documentation/devicetree/bindings/media/video/msm-cam-cci.txt

0 → 100644

+782 −0

Original line number	Diff line number	Diff line
		* Qualcomm Technologies, Inc. MSM CCI

		CCI (Camera Control Interface) is module that is use for camera sensor module
		I2C communication.

		=======================
		Required Node Structure
		=======================
		The camera CCI node must be described in two levels of device nodes. The
		first level describe the overall CCI node structure. Second level nodes
		describe camera sensor submodule nodes which is using CCI for
		i2c communication.

		======================================
		First Level Node - CCI device
		======================================

		- compatible
		Usage: required
		Value type: <string>
		Definition: Should be "qcom,cci".

		- cell-index: cci hardware core index
		Usage: required
		Value type: <u32>
		Definition: Should specify the Hardware index id.

		- reg
		Usage: required
		Value type: <u32>
		Definition: offset and length of the register set
		for the device for the cci operating in
		compatible mode.

		- reg-names
		Usage: required
		Value type: <string>
		Definition: Should specify relevant names to each
		reg property defined.

		- interrupts
		Usage: required
		Value type: <u32>
		Definition: Interrupt associated with CCI HW.

		- interrupt-names
		Usage: required
		Value type: <string>
		Definition: Name of the interrupt.

		- gpios
		Usage: required
		Value type: <phandle>
		Definition: should specify the gpios to be used for the CCI.

		- gpio-req-tbl-num
		Usage: required
		Value type: <u32>
		Definition: should specify the gpio table index.

		- gpio-req-tbl-flags
		Usage: required
		Value type: <u32>
		Definition: should specify the gpio functions.

		- gpio-req-tbl-label
		Usage: required
		Value type: <string>
		Definition: should specify the gpio labels in
		gpio-req-tbl-num property (in the same order)

		- clock-names
		Usage: required
		Value type: <string>
		Definition: List of clock names required for CCI HW.

		- clock-rates
		Usage: required
		Value type: <u32>
		Definition: List of clock rates in Hz for CCI HW.

		- clock-cntl-level
		Usage: required
		Value type: <string>
		Definition: All different clock level node can support.

		- clocks
		Usage: required
		Value type: <phandle>
		Definition: all clock phandle and source clocks.

		- src-clock-name
		Usage: required
		Value type: <string>
		Definition: name for the source clock.

		- regulator-names
		Usage: required
		Value type: <string>
		Definition: name of the voltage regulators required for the device.

		- gdscr-supply
		Usage: required
		Value type: <phandle>
		Definition: should contain gdsr regulator used for cci clocks.

		- mmagic-supply
		Usage: optional
		Value type: <phandle>
		Definition: should contain mmagic regulator used for mmagic clocks.

		=========================
		CCI clock settings
		=========================
		- I2c speed settings (*)
		Usage: required
		Definition: List of i2c rates for CCI HW.
		- i2c_freq_100Khz
		Definition: qcom,i2c_standard_mode - node should contain clock settings for
		100Khz
		- i2c_freq_400Khz
		Definition: qcom,i2c_fast_mode - node should contain clock settings for
		400Khz
		- i2c_freq_custom
		Definition: qcom,i2c_custom_mode - node can contain clock settings for
		frequencies other than 100Khz and 400Khz which is specific to usecase.
		Currently it has settings for 375Khz.
		- i2c_freq_1Mhz
		Definition: qcom,i2c_fast_plus_mode - node should contain clock
		settings for 1Mhz
		* if speed settings is not defined the low level driver can use "i2c_freq_custom"
		like default

		- hw-thigh
		Definition: should contain high period of the SCL clock in terms of CCI clock cycle
		- hw-tlow
		Definition: should contain high period of the SCL clock in terms of CCI clock cycle
		- hw-tsu-sto
		Definition: should contain setup time for STOP condition
		- hw-tsu-sta
		Definition: should contain setup time for Repeated START condition
		- hw-thd-dat
		Definition: should contain hold time for the data
		- hw-thd-sta
		Definition: should contain hold time for START condition
		- hw-tbuf
		Definition: should contain free time between a STOP and a START condition
		- hw-scl-stretch-en
		Definition: should contain enable or disable clock stretching
		- hw-trdhld
		Definition: should contain internal hold time for SDA
		- hw-tsp
		Definition: should contain filtering of glitches

		Example:

		qcom,cci@0xfda0c000 {
		cell-index = <0>;
		compatible = "qcom,cci";
		reg = <0xfda0c000 0x300>;
		reg-names = "cci";
		interrupts = <0 50 0>;
		interrupt-names = "cci";
		clock-names = "camnoc_axi_clk", "soc_ahb_clk",
		"slow_ahb_src_clk", "cpas_ahb_clk",
		"cci_clk", "cci_clk_src";
		clock-rates = <0 0 80000000 0 0 37500000>;
		clock-cntl-level = "turbo";
		gpios = <&tlmm 17 0>,
		<&tlmm 18 0>,
		<&tlmm 19 0>,
		<&tlmm 20 0>;
		gpio-tbl-num = <0 1 2 3>;
		gpio-tbl-flags = <1 1 1 1>;
		gpio-tbl-label = "CCI_I2C_DATA0",
		"CCI_I2C_CLK0",
		"CCI_I2C_DATA1",
		"CCI_I2C_CLK1";
		i2c_freq_100Khz: qcom,i2c_standard_mode {
		hw-thigh = <78>;
		hw-tlow = <114>;
		hw-tsu-sto = <28>;
		hw-tsu-sta = <28>;
		hw-thd-dat = <10>;
		hw-thd-sta = <77>;
		hw-tbuf = <118>;
		hw-scl-stretch-en = <0>;
		hw-trdhld = <6>;
		hw-tsp = <1>;
		status = "ok";
		};
		i2c_freq_400Khz: qcom,i2c_fast_mode {
		hw-thigh = <20>;
		hw-tlow = <28>;
		hw-tsu-sto = <21>;
		hw-tsu-sta = <21>;
		hw-thd-dat = <13>;
		hw-thd-sta = <18>;
		hw-tbuf = <25>;
		hw-scl-stretch-en = <0>;
		hw-trdhld = <6>;
		hw-tsp = <3>;
		status = "ok";
		};
		i2c_freq_custom: qcom,i2c_custom_mode {
		hw-thigh = <15>;
		hw-tlow = <28>;
		hw-tsu-sto = <21>;
		hw-tsu-sta = <21>;
		hw-thd-dat = <13>;
		hw-thd-sta = <18>;
		hw-tbuf = <25>;
		hw-scl-stretch-en = <1>;
		hw-trdhld = <6>;
		hw-tsp = <3>;
		status = "ok";
		};
		i2c_freq_1Mhz: qcom,i2c_fast_plus_mode {
		hw-thigh = <16>;
		hw-tlow = <22>;
		hw-tsu-sto = <17>;
		hw-tsu-sta = <18>;
		hw-thd-dat = <16>;
		hw-thd-sta = <15>;
		hw-tbuf = <19>;
		hw-scl-stretch-en = <1>;
		hw-trdhld = <3>;
		hw-tsp = <3>;
		cci-clk-src = <37500000>;
		status = "ok";
		};
		};

		=======================================
		Second Level Node - CAM SENSOR MODULES
		=======================================

		=======================================
		CAM SENSOR RESOURCE MANAGER
		=======================================
		Camera Sensor Resource manager node contains properties of shared camera
		sensor resource.

		- compatible
		Usage: required
		Value type: <string>
		Definition: Should be "qcom,cam-res-mgr".

		- shared-gpios
		Usage: optional
		Value type: <u32>
		Definition: should contain the gpios which are used by two or more
		cameras, and these cameras may be opened together.

		- pinctrl-names
		Usage: optional
		Value type: <string>
		Definition: List of names to assign the shared pin state defined in pinctrl device node

		- pinctrl-<0..n>
		Usage: optional
		Value type: <phandle>
		Definition: Lists phandles each pointing to the pin configuration node within a pin
		controller. These pin configurations are installed in the pinctrl device node.


		=============================
		CAMERA IMAGE SENSOR MODULE
		=============================
		Image sensor node contains properties of camera image sensor

		- compatible
		Usage: required
		Value type: <string>
		Definition: Should be "qcom,cam-sensor".

		- cell-index: cci hardware core index
		Usage: required
		Value type: <u32>
		Definition: Should specify the Hardware index id.

		- reg
		Usage: required
		Value type: <u32>
		Definition: offset and length of the register set
		for the device for the cci operating in
		compatible mode.

		- cci-master
		Usage: required
		Value type: <u32>
		Definition: should contain i2c master id to be used for this camera
		sensor
		- 0 -> MASTER 0
		- 1 -> MASTER 1

		- csiphy-sd-index
		Usage: required
		Value type: <u32>
		Definition: should contain csiphy instance that will used to
		receive sensor data (0, 1, 2, 3).

		- cam_vdig-supply
		Usage: required
		Value type: <phandle>
		Definition: should contain regulator from which digital voltage is
		supplied

		- cam_vana-supply
		Usage: required
		Value type: <phandle>
		Definition: should contain regulator from which analog voltage is
		supplied

		- cam_vio-supply
		Usage: required
		Value type: <phandle>
		Definition: should contain regulator from which IO voltage is supplied

		- regulator-names
		Usage: required
		Value type: <string>
		Definition: should contain names of all regulators needed by this
		sensor

		- rgltr-cntrl-support
		Usage: required
		Value type: <boolean>
		Definition: This property is required if the sw control regulator parameters
		e.g. rgltr-min-voltage

		- rgltr-min-voltage
		Usage: required
		Value type: <u32>
		Definition: should contain minimum voltage level for regulators mentioned
		in regulator-names property (in the same order)

		- rgltr-max-voltage
		Usage: required
		Value type: <u32>
		Definition: should contain maximum voltage level for regulators mentioned
		in regulator-names property (in the same order)

		- rgltr-load-current
		Usage: required
		Value type: <u32>
		Definition: should contain optimum voltage level for regulators mentioned
		in regulator-names property (in the same order)

		- sensor-position-roll
		Usage: required
		Value type: <u32>
		Definition: should contain sensor rotational angle with respect to axis of
		reference. i.e. 0, 90, 180, 360

		- sensor-position-pitch
		Usage: required
		Value type: <u32>
		Definition: should contain sensor rotational angle with respect to axis of
		reference. i.e. 0, 90, 180, 360

		- sensor-position-yaw
		Usage: required
		Value type: <u32>
		Definition: should contain sensor rotational angle with respect to axis of
		reference. i.e. 0, 90, 180, 360

		- qcom,secure
		Usage: optional
		Value type: <u32>
		Definition: should be enabled to operate the camera in secure mode

		- gpio-no-mux
		Usage: optional
		Value type: <u32>
		Definition: should contain field to indicate whether gpio mux table is
		available. i.e. 1 if gpio mux is not available, 0 otherwise

		- cam_vaf-supply
		Usage: optional
		Value type: <u32>
		Definition: should contain regulator from which AF voltage is supplied

		- gpios
		Usage: required
		Value type: <phandle>
		Definition: should contain phandle to gpio controller node and array of
		#gpio-cells specifying specific gpio (controller specific)

		- gpio-reset
		Usage: required
		Value type: <u32>
		Definition: should contain index to gpio used by sensors reset_n

		- gpio-standby
		Usage: optional
		Value type: <u32>
		Definition: should contain index to gpio used by sensors standby_n

		- gpio-vio
		Usage: optional
		Value type: <u32>
		Definition: should contain index to gpio used by sensors io vreg enable

		- gpio-vana
		Usage: optional
		Value type: <u32>
		Definition: should contain index to gpio used by sensors analog vreg enable

		- gpio-vdig
		Usage: optional
		Value type: <u32>
		Definition: should contain index to gpio used by sensors digital vreg enable

		- gpio-vaf
		Usage: optional
		Value type: <u32>
		Definition: should contain index to gpio used by sensors af vreg enable

		- gpio-af-pwdm
		Usage: optional
		Value type: <u32>
		Definition: should contain index to gpio used by sensors af pwdm_n

		- gpio-req-tbl-num
		Usage: optional
		Value type: <u32>
		Definition: should contain index to gpios specific to this sensor

		- gpio-req-tbl-flags
		Usage: optional
		Value type: <u32>
		Definition: should contain direction of gpios present in
		gpio-req-tbl-num property (in the same order)

		- gpio-req-tbl-label
		Usage: optional
		Value type: <u32>
		Definition: should contain name of gpios present in
		gpio-req-tbl-num property (in the same order)

		- gpio-set-tbl-num
		Usage: optional
		Value type: <u32>
		Definition: should contain index of gpios that need to be
		configured by msm

		- gpio-set-tbl-flags
		Usage: optional
		Value type: <u32>
		Definition: should contain value to be configured for the gpios
		present in gpio-set-tbl-num property (in the same order)

		- gpio-set-tbl-delay
		Usage: optional
		Value type: <u32>
		Definition: should contain amount of delay after configuring
		gpios as specified in gpio_set_tbl_flags property (in the same order)

		- actuator-src
		Usage: optional
		Value type: <phandle>
		Definition: if auto focus is supported by this sensor, this
		property should contain phandle of respective actuator node

		- led-flash-src
		Usage: optional
		Value type: <phandle>
		Definition: if LED flash is supported by this sensor, this
		property should contain phandle of respective LED flash node

		- qcom,vdd-cx-supply
		Usage: optional
		Value type: <phandle>
		Definition: should contain regulator from which cx voltage is supplied

		- qcom,vdd-cx-name
		Usage: optional
		Value type: <string>
		Definition: should contain names of cx regulator

		- eeprom-src
		Usage: optional
		Value type: <phandle>
		Definition: if eeprom memory is supported by this sensor, this
		property should contain phandle of respective eeprom nodes

		- ois-src
		Usage: optional
		Value type: <phandle>
		Definition: if optical image stabilization is supported by this sensor,
		this property should contain phandle of respective ois node

		- ir-led-src
		Usage: optional
		Value type: <phandle>
		Definition: if ir led is supported by this sensor, this property
		should contain phandle of respective ir-led node

		- qcom,ir-cut-src
		Usage: optional
		Value type: <phandle>
		Definition: if ir cut is supported by this sensor, this property
		should contain phandle of respective ir-cut node

		- qcom,special-support-sensors
		Usage: required
		Value type: <string>
		Definition: if only some special sensors are supported
		on this board, add sensor name in this property.

		- use-shared-clk
		Usage: optional
		Value type: <boolean>
		Definition: It is booloean property. This property is required
		if the clk is shared clk between different sensor and ois, if this
		device need to be opened together.

		- clock-rates
		Usage: required
		Value type: <u32>
		Definition: clock rate in Hz.

		- clock-cntl-level
		Usage: required
		Value type: <string>
		Definition: All different clock level node can support.

		- clock-cntl-support
		Usage: optional
		Value type: <boolean>
		Definition: Says whether clock control support is present or not

		- clocks
		Usage: required
		Value type: <phandle>
		Definition: all clock phandle and source clocks.

		- clock-control
		Usage: optional
		Value type: <string>
		Definition: The valid fields are "NO_SET_RATE", "INIT_RATE" and
		"SET_RATE". "NO_SET_RATE" the corresponding clock is enabled without setting
		the rate assuming some other driver has already set it to appropriate rate.
		"INIT_RATE" clock rate is not queried assuming some other driver has set
		the clock rate and ispif will set the the clock to this rate.
		"SET_RATE" clock is enabled and the rate is set to the value specified
		in the property clock-rates.

		=============================
		ACTUATOR MODULE
		=============================

		- compatible
		Usage: required
		Value type: <string>
		Definition: Should be "qcom,actuator".

		- cell-index: cci hardware core index
		Usage: required
		Value type: <u32>
		Definition: Should specify the Hardware index id.

		- reg
		Usage: required
		Value type: <u32>
		Definition: offset and length of the register set
		for the device for the cci operating in
		compatible mode.

		- cci-master
		Usage: required
		Value type: <u32>
		Definition: should contain i2c master id to be used for this camera
		sensor
		- 0 -> MASTER 0
		- 1 -> MASTER 1

		- cam_vaf-supply
		Usage: required
		Value type: <phandle>
		Definition: should contain regulator from which AF voltage is supplied

		- regulator-names
		Usage: required
		Value type: <string>
		Definition: should contain names of all regulators needed by this
		actuator. i.e. "cam_vaf"

		- rgltr-cntrl-support
		Usage: optional
		Value type: <boolean>
		Definition: It is booloean property. This property is required
		if the code and regulator control parameters e.g. rgltr-min-voltage

		- rgltr-min-voltage
		Usage: optional
		Value type: <u32>
		Definition: should contain minimum voltage level in mcrovolts
		for regulators mentioned in regulator-names property (in the same order)

		- rgltr-max-voltage
		Usage: optional
		Value type: <u32>
		Definition: should contain maximum voltage level in mcrovolts
		for regulators mentioned in regulator-names property (in the same order)

		- rgltr-load-current
		Usage: optional
		Value type: <u32>
		Definition: should contain the maximum current in microamps
		required from the regulators mentioned in the regulator-names property
		(in the same order).

		=============================
		OIS MODULE
		=============================

		- compatible
		Usage: required
		Value type: <string>
		Definition: Should be "qcom,ois".

		- cell-index: cci hardware core index
		Usage: required
		Value type: <u32>
		Definition: Should specify the Hardware index id.

		- reg
		Usage: required
		Value type: <u32>
		Definition: offset and length of the register set
		for the device for the cci operating in
		compatible mode.

		- cci-master
		Usage: required
		Value type: <u32>
		Definition: should contain i2c master id to be used for this camera
		sensor
		- 0 -> MASTER 0
		- 1 -> MASTER 1

		- cam_vaf-supply
		Usage: required
		Value type: <phandle>
		Definition: should contain regulator from which AF voltage is supplied

		- regulator-names
		Usage: required
		Value type: <string>
		Definition: should contain names of all regulators needed by this
		actuator. i.e. "cam_vaf"

		- rgltr-cntrl-support
		Usage: optional
		Value type: <boolean>
		Definition: It is booloean property. This property is required
		if the code and regulator control parameters e.g. rgltr-min-voltage

		- rgltr-min-voltage
		Usage: optional
		Value type: <u32>
		Definition: should contain minimum voltage level in mcrovolts
		for regulators mentioned in regulator-names property (in the same order)

		- rgltr-max-voltage
		Usage: optional
		Value type: <u32>
		Definition: should contain maximum voltage level in mcrovolts
		for regulators mentioned in regulator-names property (in the same order)

		- rgltr-load-current
		Usage: optional
		Value type: <u32>
		Definition: should contain the maximum current in microamps
		required from the regulators mentioned in the regulator-names property
		(in the same order).

		- use-shared-clk
		Usage: optional
		Value type: <boolean>
		Definition: This property is required if the clk is shared clk between different
		sensor and ois, if this device need to be opened together.

		Example:
		&soc {
		led_flash0: qcom,camera-flash@0 {
		cell-index = <0>;
		compatible = "qcom,camera-flash";
		flash-source = <&pmi8994_flash0 &pmi8994_flash1>;
		torch-source = <&pmi8998_torch0 &pmi8998_torch1>;
		switch-source = <&pmi8998_switch>;
		status = "ok";
		};
		};

		&cam_cci0 {
		actuator0: qcom,actuator@0 {
		cell-index = <0>;
		reg = <0x0>;
		compatible = "qcom,actuator";
		cci-master = <0>;
		cam_vaf-supply = <&pmi8998_bob>;
		regulator-names = "cam_vaf";
		rgltr-cntrl-support;
		rgltr-min-voltage = <2800000>;
		rgltr-max-voltage = <2800000>;
		rgltr-load-current = <100000>;
		};

		ois0: qcom,ois@0 {
		cell-index = <0>;
		reg = <0x0>;
		compatible = "qcom,ois";
		cci-master = <0>;
		cam_vaf-supply = <&pmi8998_bob>;
		regulator-names = "cam_vaf";
		rgltr-cntrl-support;
		rgltr-min-voltage = <2800000>;
		rgltr-max-voltage = <2800000>;
		rgltr-load-current = <100000>;
		};

		qcom,cam-res-mgr {
		compatible = "qcom,cam-res-mgr";
		status = "ok";
		shared-gpios = <18 19>;
		pinctrl-names = "cam_res_mgr_default", "cam_res_mgr_suspend";
		pinctrl-0 = <&cam_shared_clk_active &cam_res_mgr_active>;
		pinctrl-1 = <&cam_shared_clk_suspend &cam_res_mgr_suspend>;
		};

		qcom,cam-sensor@0 {
		cell-index = <0>;
		compatible = "qcom,camera";
		reg = <0x0>;
		csiphy-sd-index = <0>;
		sensor-position-roll = <90>;
		sensor-position-pitch = <0>;
		sensor-position-yaw = <180>;
		secure = <1>;
		led-flash-src = <&led_flash0>;
		actuator-src = <&actuator0>;
		ois-src = <&ois0>;
		eeprom-src = <&eeprom0>;
		cam_vdig-supply = <&pm845_s3>;
		cam_vio-supply = <&pm845_lvs1>;
		cam_vana-supply = <&pmi8998_bob>;
		regulator-names = "cam_vdig", "cam_vio", "cam_vana";
		rgltr-cntrl-support;
		rgltr-min-voltage = <0 3312000 1352000>;
		rgltr-max-voltage = <0 3312000 1352000>;
		rgltr-load-current = <0 80000 105000>;
		gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk0_active
		&cam_sensor_rear_active>;
		pinctrl-1 = <&cam_sensor_mclk0_suspend
		&cam_sensor_rear_suspend>;
		gpios = <&tlmm 13 0>,
		<&tlmm 80 0>,
		<&tlmm 79 0>;
		gpio-reset = <1>;
		gpio-standby = <2>;
		gpio-req-tbl-num = <0 1 2>;
		gpio-req-tbl-flags = <1 0 0>;
		gpio-req-tbl-label = "CAMIF_MCLK0",
		"CAM_RESET0",
		"CAM_VANA";
		sensor-position = <0>;
		sensor-mode = <0>;
		cci-master = <0>;
		status = "ok";
		use-shared-clk;
		clocks = <&clock_mmss clk_mclk0_clk_src>,
		<&clock_mmss clk_camss_mclk0_clk>;
		clock-names = "cam_src_clk", "cam_clk";
		clock-cntl-leveli = "turbo";
		clock-rates = <24000000>;
		};
		};

Documentation/devicetree/bindings/media/video/msm-cam-cdm.txt

0 → 100644

+154 −0

File added.

Preview size limit exceeded, changes collapsed.

Documentation/devicetree/bindings/media/video/msm-cam-cpas.txt

0 → 100644

+306 −0

File added.

Preview size limit exceeded, changes collapsed.

Documentation/devicetree/bindings/media/video/msm-cam-csiphy.txt

0 → 100644

+115 −0

Original line number	Diff line number	Diff line
		* Qualcomm Technologies, Inc. MSM CSI Phy

		=======================
		Required Node Structure
		=======================
		The camera CSIPHY node must be described in First level of device nodes. The
		first level describe the overall CSIPHY node structure.

		======================================
		First Level Node - CSIPHY device
		======================================

		- compatible
		Usage: required
		Value type: <string>
		Definition: Should be "qcom,csiphy-v1.0", "qcom,csiphy".

		- cell-index: csiphy hardware core index
		Usage: required
		Value type: <u32>
		Definition: Should specify the Hardware index id.

		- reg
		Usage: required
		Value type: <u32>
		Definition: offset and length of the register set
		for the device for the csiphy operating in
		compatible mode.

		- reg-names
		Usage: required
		Value type: <string>
		Definition: Should specify relevant names to each
		reg property defined.

		- reg-cam-base
		Usage: required
		Value type: <string>
		Definition: offset of CSIPHY in camera hw block

		- interrupts
		Usage: required
		Value type: <u32>
		Definition: Interrupt associated with CCI HW.

		- interrupt-names
		Usage: required
		Value type: <string>
		Definition: Name of the interrupt.

		- clock-names
		Usage: required
		Value type: <string>
		Definition: List of clock names required for CSIPHY HW.

		- clock-rates
		Usage: required
		Value type: <u32>
		Definition: List of clock rates in Hz for CSIPHY HW.

		- clock-cntl-level
		Usage: required
		Value type: <string>
		Definition: All different clock level node can support.

		- clocks
		Usage: required
		Value type: <phandle>
		Definition: all clock phandle and source clocks.

		- regulator-names
		Usage: required
		Value type: <string>
		Definition: name of the voltage regulators required for the device.

		- gdscr-supply
		Usage: required
		Value type: <phandle>
		Definition: should contain gdsr regulator used for CSIPHY clocks.

		- mipi-csi-vdd-supply
		Usage: required
		Value type: <phandle>
		Definition: should contain phandle for mipi-csi-vdd regulator used for
		CSIPHY device.

		- csi-vdd-voltage
		Usage: required
		Value type: <u32>
		Definition: should contain required voltage for csi-vdd supply for CSIPHY.

		Example:

		qcom,csiphy@ac65000 {
		cell-index = <0>;
		compatible = "qcom,csiphy-v1.0", "qcom,csiphy";
		reg = <0xac65000 0x200>;
		reg-cam-base = <0x65000>;
		reg-names = "csiphy";
		interrupts = <0 477 0>;
		interrupt-names = "csiphy";
		regulator-names = "gdscr", "refgen";
		mipi-csi-vdd-supply = <&pm8998_l1>;
		csi-vdd-voltage = <1200000>;
		gdscr-supply = <&titan_top_gdsc>;
		clocks = <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>,
		<&clock_camcc CAM_CC_CSIPHY0_CLK>,
		<&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>,
		<&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>;
		clock-names = "cphy_rx_clk_src", "csiphy0_clk",
		"csi0phytimer_clk_src", "csi0phytimer_clk";
		clock-rates = <400000000 0 300000000 0>;
		clock-cntl-level = "turbo";
		status = "ok";
		};

Documentation/devicetree/bindings/media/video/msm-cam-eeprom.txt

0 → 100644

+489 −0

File added.

Preview size limit exceeded, changes collapsed.