diff --git a/.gitignore b/.gitignore index acb6afe6b7a3a4acbc0f5f3d00f2a2ead1b8999e..4ad4a98b884b9c857166d993d167fe4953210201 100644 --- a/.gitignore +++ b/.gitignore @@ -24,6 +24,7 @@ *.order *.elf *.bin +*.tar *.gz *.bz2 *.lzma diff --git a/.mailmap b/.mailmap index 0d971cfb07724828cde3e2fdb7bb184b649054fd..6287004040e7c174feb8209b506b460c66271dcc 100644 --- a/.mailmap +++ b/.mailmap @@ -100,6 +100,7 @@ Rajesh Shah Ralf Baechle Ralf Wildenhues Rémi Denis-Courmont +Ricardo Ribalda Delgado Rudolf Marek Rui Saraiva Sachin P Sant diff --git a/CREDITS b/CREDITS index 843e17647f3b72bfda48632d67ba089307b15602..ec7e6c7fdd1b9c93342d808d1c65d8807e63312f 100644 --- a/CREDITS +++ b/CREDITS @@ -508,6 +508,10 @@ E: paul@paulbristow.net W: http://paulbristow.net/linux/idefloppy.html D: Maintainer of IDE/ATAPI floppy driver +N: Stefano Brivio +E: stefano.brivio@polimi.it +D: Broadcom B43 driver + N: Dominik Brodowski E: linux@brodo.de W: http://www.brodo.de/ @@ -2045,6 +2049,10 @@ D: pirq addr, CS5535 alsa audio driver S: Gurgaon, India S: Kuala Lumpur, Malaysia +N: Mohit Kumar +D: ST Microelectronics SPEAr13xx PCI host bridge driver +D: Synopsys Designware PCI host bridge driver + N: Gabor Kuti M: seasons@falcon.sch.bme.hu M: seasons@makosteszta.sote.hu @@ -3008,6 +3016,19 @@ W: http://www.qsl.net/dl1bke/ D: Generic Z8530 driver, AX.25 DAMA slave implementation D: Several AX.25 hacks +N: Ricardo Ribalda Delgado +E: ricardo.ribalda@gmail.com +W: http://ribalda.com +D: PLX USB338x driver +D: PCA9634 driver +D: Option GTM671WFS +D: Fintek F81216A +D: Various kernel hacks +S: Qtechnology A/S +S: Valby Langgade 142 +S: 2500 Valby +S: Denmark + N: Francois-Rene Rideau E: fare@tunes.org W: http://www.tunes.org/~fare @@ -3688,6 +3709,13 @@ N: Dirk Verworner D: Co-author of German book ``Linux-Kernel-Programmierung'' D: Co-founder of Berlin Linux User Group +N: Andrew Victor +E: linux@maxim.org.za +W: http://maxim.org.za/at91_26.html +D: First maintainer of Atmel ARM-based SoC, aka AT91 +D: Introduced support for at91rm9200, the first chip of AT91 family +S: South Africa + N: Riku Voipio E: riku.voipio@iki.fi D: Author of PCA9532 LED and Fintek f75375s hwmon driver diff --git a/Documentation/ABI/obsolete/sysfs-block-zram b/Documentation/ABI/obsolete/sysfs-block-zram new file mode 100644 index 0000000000000000000000000000000000000000..720ea92cfb2e87bb8fa0d6a9ac5e0c14021c23d2 --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-block-zram @@ -0,0 +1,119 @@ +What: /sys/block/zram/num_reads +Date: August 2015 +Contact: Sergey Senozhatsky +Description: + The num_reads file is read-only and specifies the number of + reads (failed or successful) done on this device. + Now accessible via zram/stat node. + +What: /sys/block/zram/num_writes +Date: August 2015 +Contact: Sergey Senozhatsky +Description: + The num_writes file is read-only and specifies the number of + writes (failed or successful) done on this device. + Now accessible via zram/stat node. + +What: /sys/block/zram/invalid_io +Date: August 2015 +Contact: Sergey Senozhatsky +Description: + The invalid_io file is read-only and specifies the number of + non-page-size-aligned I/O requests issued to this device. + Now accessible via zram/io_stat node. + +What: /sys/block/zram/failed_reads +Date: August 2015 +Contact: Sergey Senozhatsky +Description: + The failed_reads file is read-only and specifies the number of + failed reads happened on this device. + Now accessible via zram/io_stat node. + +What: /sys/block/zram/failed_writes +Date: August 2015 +Contact: Sergey Senozhatsky +Description: + The failed_writes file is read-only and specifies the number of + failed writes happened on this device. + Now accessible via zram/io_stat node. + +What: /sys/block/zram/notify_free +Date: August 2015 +Contact: Sergey Senozhatsky +Description: + The notify_free file is read-only. Depending on device usage + scenario it may account a) the number of pages freed because + of swap slot free notifications or b) the number of pages freed + because of REQ_DISCARD requests sent by bio. The former ones + are sent to a swap block device when a swap slot is freed, which + implies that this disk is being used as a swap disk. The latter + ones are sent by filesystem mounted with discard option, + whenever some data blocks are getting discarded. + Now accessible via zram/io_stat node. + +What: /sys/block/zram/zero_pages +Date: August 2015 +Contact: Sergey Senozhatsky +Description: + The zero_pages file is read-only and specifies number of zero + filled pages written to this disk. No memory is allocated for + such pages. + Now accessible via zram/mm_stat node. + +What: /sys/block/zram/orig_data_size +Date: August 2015 +Contact: Sergey Senozhatsky +Description: + The orig_data_size file is read-only and specifies uncompressed + size of data stored in this disk. This excludes zero-filled + pages (zero_pages) since no memory is allocated for them. + Unit: bytes + Now accessible via zram/mm_stat node. + +What: /sys/block/zram/compr_data_size +Date: August 2015 +Contact: Sergey Senozhatsky +Description: + The compr_data_size file is read-only and specifies compressed + size of data stored in this disk. So, compression ratio can be + calculated using orig_data_size and this statistic. + Unit: bytes + Now accessible via zram/mm_stat node. + +What: /sys/block/zram/mem_used_total +Date: August 2015 +Contact: Sergey Senozhatsky +Description: + The mem_used_total file is read-only and specifies the amount + of memory, including allocator fragmentation and metadata + overhead, allocated for this disk. So, allocator space + efficiency can be calculated using compr_data_size and this + statistic. + Unit: bytes + Now accessible via zram/mm_stat node. + +What: /sys/block/zram/mem_used_max +Date: August 2015 +Contact: Sergey Senozhatsky +Description: + The mem_used_max file is read/write and specifies the amount + of maximum memory zram have consumed to store compressed data. + For resetting the value, you should write "0". Otherwise, + you could see -EINVAL. + Unit: bytes + Downgraded to write-only node: so it's possible to set new + value only; its current value is stored in zram/mm_stat + node. + +What: /sys/block/zram/mem_limit +Date: August 2015 +Contact: Sergey Senozhatsky +Description: + The mem_limit file is read/write and specifies the maximum + amount of memory ZRAM can use to store the compressed data. + The limit could be changed in run time and "0" means disable + the limit. No limit is the initial state. Unit: bytes + Downgraded to write-only node: so it's possible to set new + value only; its current value is stored in zram/mm_stat + node. diff --git a/Documentation/ABI/testing/sysfs-block-dm b/Documentation/ABI/testing/sysfs-block-dm index 87ca5691e29b1d92726e01bbe5296cde6932d08d..f9f2339b9a0a88e485d91bae022b1e6a3d213f07 100644 --- a/Documentation/ABI/testing/sysfs-block-dm +++ b/Documentation/ABI/testing/sysfs-block-dm @@ -23,3 +23,25 @@ Description: Device-mapper device suspend state. Contains the value 1 while the device is suspended. Otherwise it contains 0. Read-only attribute. Users: util-linux, device-mapper udev rules + +What: /sys/block/dm-/dm/rq_based_seq_io_merge_deadline +Date: March 2015 +KernelVersion: 4.1 +Contact: dm-devel@redhat.com +Description: Allow control over how long a request that is a + reasonable merge candidate can be queued on the request + queue. The resolution of this deadline is in + microseconds (ranging from 1 to 100000 usecs). + Setting this attribute to 0 (the default) will disable + request-based DM's merge heuristic and associated extra + accounting. This attribute is not applicable to + bio-based DM devices so it will only ever report 0 for + them. + +What: /sys/block/dm-/dm/use_blk_mq +Date: March 2015 +KernelVersion: 4.1 +Contact: dm-devel@redhat.com +Description: Request-based Device-mapper blk-mq I/O path mode. + Contains the value 1 if the device is using blk-mq. + Otherwise it contains 0. Read-only attribute. diff --git a/Documentation/ABI/testing/sysfs-block-zram b/Documentation/ABI/testing/sysfs-block-zram index a6148eaf91e5f32f43b8448a7ec0ee16677c83eb..2e69e83bf51057501662e606fb6791338e3838cd 100644 --- a/Documentation/ABI/testing/sysfs-block-zram +++ b/Documentation/ABI/testing/sysfs-block-zram @@ -141,3 +141,28 @@ Description: amount of memory ZRAM can use to store the compressed data. The limit could be changed in run time and "0" means disable the limit. No limit is the initial state. Unit: bytes + +What: /sys/block/zram/compact +Date: August 2015 +Contact: Minchan Kim +Description: + The compact file is write-only and trigger compaction for + allocator zrm uses. The allocator moves some objects so that + it could free fragment space. + +What: /sys/block/zram/io_stat +Date: August 2015 +Contact: Sergey Senozhatsky +Description: + The io_stat file is read-only and accumulates device's I/O + statistics not accounted by block layer. For example, + failed_reads, failed_writes, etc. File format is similar to + block layer statistics file format. + +What: /sys/block/zram/mm_stat +Date: August 2015 +Contact: Sergey Senozhatsky +Description: + The mm_stat file is read-only and represents device's mm + statistics (orig_data_size, compr_data_size, etc.) in a format + similar to block layer statistics file format. diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl index 3680364b404885cf509f6d2b1261f342873f4244..d46bba801aace45ed29ea559a7a1c9c1fe764fd5 100644 --- a/Documentation/ABI/testing/sysfs-class-cxl +++ b/Documentation/ABI/testing/sysfs-class-cxl @@ -100,7 +100,7 @@ Description: read only Hexadecimal value of the device ID found in this AFU configuration record. -What: /sys/class/cxl//cr/vendor +What: /sys/class/cxl//cr/class Date: February 2015 Contact: linuxppc-dev@lists.ozlabs.org Description: read only diff --git a/Documentation/ABI/testing/sysfs-class-led-flash b/Documentation/ABI/testing/sysfs-class-led-flash new file mode 100644 index 0000000000000000000000000000000000000000..220a0270b47b4981936e1832f83aa11dfd8c9558 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-flash @@ -0,0 +1,80 @@ +What: /sys/class/leds//flash_brightness +Date: March 2015 +KernelVersion: 4.0 +Contact: Jacek Anaszewski +Description: read/write + Set the brightness of this LED in the flash strobe mode, in + microamperes. The file is created only for the flash LED devices + that support setting flash brightness. + + The value is between 0 and + /sys/class/leds//max_flash_brightness. + +What: /sys/class/leds//max_flash_brightness +Date: March 2015 +KernelVersion: 4.0 +Contact: Jacek Anaszewski +Description: read only + Maximum brightness level for this LED in the flash strobe mode, + in microamperes. + +What: /sys/class/leds//flash_timeout +Date: March 2015 +KernelVersion: 4.0 +Contact: Jacek Anaszewski +Description: read/write + Hardware timeout for flash, in microseconds. The flash strobe + is stopped after this period of time has passed from the start + of the strobe. The file is created only for the flash LED + devices that support setting flash timeout. + +What: /sys/class/leds//max_flash_timeout +Date: March 2015 +KernelVersion: 4.0 +Contact: Jacek Anaszewski +Description: read only + Maximum flash timeout for this LED, in microseconds. + +What: /sys/class/leds//flash_strobe +Date: March 2015 +KernelVersion: 4.0 +Contact: Jacek Anaszewski +Description: read/write + Flash strobe state. When written with 1 it triggers flash strobe + and when written with 0 it turns the flash off. + + On read 1 means that flash is currently strobing and 0 means + that flash is off. + +What: /sys/class/leds//flash_fault +Date: March 2015 +KernelVersion: 4.0 +Contact: Jacek Anaszewski +Description: read only + Space separated list of flash faults that may have occurred. + Flash faults are re-read after strobing the flash. Possible + flash faults: + + * led-over-voltage - flash controller voltage to the flash LED + has exceeded the limit specific to the flash controller + * flash-timeout-exceeded - the flash strobe was still on when + the timeout set by the user has expired; not all flash + controllers may set this in all such conditions + * controller-over-temperature - the flash controller has + overheated + * controller-short-circuit - the short circuit protection + of the flash controller has been triggered + * led-power-supply-over-current - current in the LED power + supply has exceeded the limit specific to the flash + controller + * indicator-led-fault - the flash controller has detected + a short or open circuit condition on the indicator LED + * led-under-voltage - flash controller voltage to the flash + LED has been below the minimum limit specific to + the flash + * controller-under-voltage - the input voltage of the flash + controller is below the limit under which strobing the + flash at full current will not be possible; + the condition persists until this flag is no longer set + * led-over-temperature - the temperature of the LED has exceeded + its allowed upper limit diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd index 76ee192f80a080b12f319d2e6624f38606f4efa7..3b5c3bca9186d13e8cf5f1911b2fc88424c6970f 100644 --- a/Documentation/ABI/testing/sysfs-class-mtd +++ b/Documentation/ABI/testing/sysfs-class-mtd @@ -222,3 +222,13 @@ Description: The number of blocks that are marked as reserved, if any, in this partition. These are typically used to store the in-flash bad block table (BBT). + +What: /sys/class/mtd/mtdX/offset +Date: March 2015 +KernelVersion: 4.1 +Contact: linux-mtd@lists.infradead.org +Description: + For a partition, the offset of that partition from the start + of the master device in bytes. This attribute is absent on + main devices, so it can be used to distinguish between + partitions and devices that aren't partitions. diff --git a/Documentation/ABI/testing/sysfs-class-net b/Documentation/ABI/testing/sysfs-class-net index beb8ec4dabbc648dd629e16a076662c9b78ff529..5ecfd72ba684c35acce51273d4370258b147ffb8 100644 --- a/Documentation/ABI/testing/sysfs-class-net +++ b/Documentation/ABI/testing/sysfs-class-net @@ -188,6 +188,14 @@ Description: Indicates the interface unique physical port identifier within the NIC, as a string. +What: /sys/class/net//phys_port_name +Date: March 2015 +KernelVersion: 4.0 +Contact: netdev@vger.kernel.org +Description: + Indicates the interface physical port name within the NIC, + as a string. + What: /sys/class/net//speed Date: October 2009 KernelVersion: 2.6.33 diff --git a/Documentation/ABI/testing/sysfs-class-net-queues b/Documentation/ABI/testing/sysfs-class-net-queues index 5e9aeb91d355562f94c93bcbef09c5f73d2cc102..0c0df91b1516fb087ae22f82a43dafa3fb44e858 100644 --- a/Documentation/ABI/testing/sysfs-class-net-queues +++ b/Documentation/ABI/testing/sysfs-class-net-queues @@ -24,6 +24,14 @@ Description: Indicates the number of transmit timeout events seen by this network interface transmit queue. +What: /sys/class//queues/tx-/tx_maxrate +Date: March 2015 +KernelVersion: 4.1 +Contact: netdev@vger.kernel.org +Description: + A Mbps max-rate set for the queue, a value of zero means disabled, + default is disabled. + What: /sys/class//queues/tx-/xps_cpus Date: November 2010 KernelVersion: 2.6.38 diff --git a/Documentation/ABI/testing/sysfs-driver-toshiba_acpi b/Documentation/ABI/testing/sysfs-driver-toshiba_acpi index ca9c71a531c5f86c1ca281f6e9ca5d2129da0c8a..eed922ef42e533ae9bf16da6d224a50d2b46e16b 100644 --- a/Documentation/ABI/testing/sysfs-driver-toshiba_acpi +++ b/Documentation/ABI/testing/sysfs-driver-toshiba_acpi @@ -8,9 +8,11 @@ Description: This file controls the keyboard backlight operation mode, valid * 0x2 -> AUTO (also called TIMER) * 0x8 -> ON * 0x10 -> OFF - Note that the kernel 3.16 onwards this file accepts all listed + Note that from kernel 3.16 onwards this file accepts all listed parameters, kernel 3.15 only accepts the first two (FN-Z and AUTO). + Also note that toggling this value on type 1 devices, requires + a reboot for changes to take effect. Users: KToshiba What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/kbd_backlight_timeout @@ -67,15 +69,72 @@ Description: This file shows the current keyboard backlight type, * 2 -> Type 2, supporting modes TIMER, ON and OFF Users: KToshiba +What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/usb_sleep_charge +Date: January 23, 2015 +KernelVersion: 4.0 +Contact: Azael Avalos +Description: This file controls the USB Sleep & Charge charging mode, which + can be: + * 0 -> Disabled (0x00) + * 1 -> Alternate (0x09) + * 2 -> Auto (0x21) + * 3 -> Typical (0x11) + Note that from kernel 4.1 onwards this file accepts all listed + values, kernel 4.0 only supports the first three. + Note that this feature only works when connected to power, if + you want to use it under battery, see the entry named + "sleep_functions_on_battery" +Users: KToshiba + +What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/sleep_functions_on_battery +Date: January 23, 2015 +KernelVersion: 4.0 +Contact: Azael Avalos +Description: This file controls the USB Sleep Functions under battery, and + set the level at which point they will be disabled, accepted + values can be: + * 0 -> Disabled + * 1-100 -> Battery level to disable sleep functions + Currently it prints two values, the first one indicates if the + feature is enabled or disabled, while the second one shows the + current battery level set. + Note that when the value is set to disabled, the sleep function + will only work when connected to power. +Users: KToshiba + +What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/usb_rapid_charge +Date: January 23, 2015 +KernelVersion: 4.0 +Contact: Azael Avalos +Description: This file controls the USB Rapid Charge state, which can be: + * 0 -> Disabled + * 1 -> Enabled + Note that toggling this value requires a reboot for changes to + take effect. +Users: KToshiba + +What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/usb_sleep_music +Date: January 23, 2015 +KernelVersion: 4.0 +Contact: Azael Avalos +Description: This file controls the Sleep & Music state, which values can be: + * 0 -> Disabled + * 1 -> Enabled + Note that this feature only works when connected to power, if + you want to use it under battery, see the entry named + "sleep_functions_on_battery" +Users: KToshiba + What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/version -Date: February, 2015 -KernelVersion: 3.20 +Date: February 12, 2015 +KernelVersion: 4.0 Contact: Azael Avalos Description: This file shows the current version of the driver +Users: KToshiba What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/fan -Date: February, 2015 -KernelVersion: 3.20 +Date: February 12, 2015 +KernelVersion: 4.0 Contact: Azael Avalos Description: This file controls the state of the internal fan, valid values are: @@ -83,8 +142,8 @@ Description: This file controls the state of the internal fan, valid * 1 -> ON What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/kbd_function_keys -Date: February, 2015 -KernelVersion: 3.20 +Date: February 12, 2015 +KernelVersion: 4.0 Contact: Azael Avalos Description: This file controls the Special Functions (hotkeys) operation mode, valid values are: @@ -94,21 +153,29 @@ Description: This file controls the Special Functions (hotkeys) operation and the hotkeys are accessed via FN-F{1-12}. In the "Special Functions" mode, the F{1-12} keys trigger the hotkey and the F{1-12} keys are accessed via FN-F{1-12}. + Note that toggling this value requires a reboot for changes to + take effect. +Users: KToshiba What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/panel_power_on -Date: February, 2015 -KernelVersion: 3.20 +Date: February 12, 2015 +KernelVersion: 4.0 Contact: Azael Avalos Description: This file controls whether the laptop should turn ON whenever the LID is opened, valid values are: * 0 -> Disabled * 1 -> Enabled + Note that toggling this value requires a reboot for changes to + take effect. +Users: KToshiba What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/usb_three -Date: February, 2015 -KernelVersion: 3.20 +Date: February 12, 2015 +KernelVersion: 4.0 Contact: Azael Avalos -Description: This file controls whether the USB 3 functionality, valid - values are: +Description: This file controls the USB 3 functionality, valid values are: * 0 -> Disabled (Acts as a regular USB 2) * 1 -> Enabled (Full USB 3 functionality) + Note that toggling this value requires a reboot for changes to + take effect. +Users: KToshiba diff --git a/Documentation/ABI/testing/sysfs-platform-dell-laptop b/Documentation/ABI/testing/sysfs-platform-dell-laptop new file mode 100644 index 0000000000000000000000000000000000000000..8c6a0b8e113133c127b1505c61e09ff1d347d551 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-dell-laptop @@ -0,0 +1,69 @@ +What: /sys/class/leds/dell::kbd_backlight/als_enabled +Date: December 2014 +KernelVersion: 3.19 +Contact: Gabriele Mazzotta , + Pali Rohár +Description: + This file allows to control the automatic keyboard + illumination mode on some systems that have an ambient + light sensor. Write 1 to this file to enable the auto + mode, 0 to disable it. + +What: /sys/class/leds/dell::kbd_backlight/als_setting +Date: December 2014 +KernelVersion: 3.19 +Contact: Gabriele Mazzotta , + Pali Rohár +Description: + This file allows to specifiy the on/off threshold value, + as reported by the ambient light sensor. + +What: /sys/class/leds/dell::kbd_backlight/start_triggers +Date: December 2014 +KernelVersion: 3.19 +Contact: Gabriele Mazzotta , + Pali Rohár +Description: + This file allows to control the input triggers that + turn on the keyboard backlight illumination that is + disabled because of inactivity. + Read the file to see the triggers available. The ones + enabled are preceded by '+', those disabled by '-'. + + To enable a trigger, write its name preceded by '+' to + this file. To disable a trigger, write its name preceded + by '-' instead. + + For example, to enable the keyboard as trigger run: + echo +keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers + To disable it: + echo -keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers + + Note that not all the available triggers can be configured. + +What: /sys/class/leds/dell::kbd_backlight/stop_timeout +Date: December 2014 +KernelVersion: 3.19 +Contact: Gabriele Mazzotta , + Pali Rohár +Description: + This file allows to specify the interval after which the + keyboard illumination is disabled because of inactivity. + The timeouts are expressed in seconds, minutes, hours and + days, for which the symbols are 's', 'm', 'h' and 'd' + respectively. + + To configure the timeout, write to this file a value along + with any the above units. If no unit is specified, the value + is assumed to be expressed in seconds. + + For example, to set the timeout to 10 minutes run: + echo 10m > /sys/class/leds/dell::kbd_backlight/stop_timeout + + Note that when this file is read, the returned value might be + expressed in a different unit than the one used when the timeout + was set. + + Also note that only some timeouts are supported and that + some systems might fall back to a specific timeout in case + an invalid timeout is written to this file. diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle index 449a8a19fc21fd12582e4ab144549740bd6dd4c3..f4b78eafd92a2e76e439f168fff97e1d41374b59 100644 --- a/Documentation/CodingStyle +++ b/Documentation/CodingStyle @@ -13,7 +13,7 @@ and NOT read it. Burn them, it's a great symbolic gesture. Anyway, here goes: - Chapter 1: Indentation + Chapter 1: Indentation Tabs are 8 characters, and thus indentations are also 8 characters. There are heretic movements that try to make indentations 4 (or even 2!) @@ -56,7 +56,6 @@ instead of "double-indenting" the "case" labels. E.g.: break; } - Don't put multiple statements on a single line unless you have something to hide: @@ -156,25 +155,25 @@ comments on. Do not unnecessarily use braces where a single statement will do. -if (condition) - action(); + if (condition) + action(); and -if (condition) - do_this(); -else - do_that(); + if (condition) + do_this(); + else + do_that(); This does not apply if only one branch of a conditional statement is a single statement; in the latter case use braces in both branches: -if (condition) { - do_this(); - do_that(); -} else { - otherwise(); -} + if (condition) { + do_this(); + do_that(); + } else { + otherwise(); + } 3.1: Spaces @@ -186,8 +185,11 @@ although they are not required in the language, as in: "sizeof info" after "struct fileinfo info;" is declared). So use a space after these keywords: + if, switch, case, for, do, while + but not with sizeof, typeof, alignof, or __attribute__. E.g., + s = sizeof(struct file); Do not add spaces around (inside) parenthesized expressions. This example is @@ -209,12 +211,15 @@ such as any of these: = + - < > * / % | & ^ <= >= == != ? : but no space after unary operators: + & * + - ~ ! sizeof typeof alignof __attribute__ defined no space before the postfix increment & decrement unary operators: + ++ -- no space after the prefix increment & decrement unary operators: + ++ -- and no space around the '.' and "->" structure member operators. @@ -268,13 +273,11 @@ See chapter 6 (Functions). Chapter 5: Typedefs Please don't use things like "vps_t". - It's a _mistake_ to use typedef for structures and pointers. When you see a vps_t a; in the source, what does it mean? - In contrast, if it says struct virtual_container *a; @@ -372,11 +375,11 @@ In source files, separate functions with one blank line. If the function is exported, the EXPORT* macro for it should follow immediately after the closing function brace line. E.g.: -int system_is_up(void) -{ - return system_state == SYSTEM_RUNNING; -} -EXPORT_SYMBOL(system_is_up); + int system_is_up(void) + { + return system_state == SYSTEM_RUNNING; + } + EXPORT_SYMBOL(system_is_up); In function prototypes, include parameter names with their data types. Although this is not required by the C language, it is preferred in Linux @@ -405,34 +408,34 @@ The rationale for using gotos is: modifications are prevented - saves the compiler work to optimize redundant code away ;) -int fun(int a) -{ - int result = 0; - char *buffer; - - buffer = kmalloc(SIZE, GFP_KERNEL); - if (!buffer) - return -ENOMEM; - - if (condition1) { - while (loop1) { - ... + int fun(int a) + { + int result = 0; + char *buffer; + + buffer = kmalloc(SIZE, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + if (condition1) { + while (loop1) { + ... + } + result = 1; + goto out_buffer; } - result = 1; - goto out_buffer; + ... + out_buffer: + kfree(buffer); + return result; } - ... -out_buffer: - kfree(buffer); - return result; -} A common type of bug to be aware of it "one err bugs" which look like this: -err: - kfree(foo->bar); - kfree(foo); - return ret; + err: + kfree(foo->bar); + kfree(foo); + return ret; The bug in this code is that on some exit paths "foo" is NULL. Normally the fix for this is to split it up into two error labels "err_bar:" and "err_foo:". @@ -503,9 +506,9 @@ values. To do the latter, you can stick the following in your .emacs file: (defun c-lineup-arglist-tabs-only (ignored) "Line up argument lists by tabs, not spaces" (let* ((anchor (c-langelem-pos c-syntactic-element)) - (column (c-langelem-2nd-pos c-syntactic-element)) - (offset (- (1+ column) anchor)) - (steps (floor offset c-basic-offset))) + (column (c-langelem-2nd-pos c-syntactic-element)) + (offset (- (1+ column) anchor)) + (steps (floor offset c-basic-offset))) (* (max steps 1) c-basic-offset))) @@ -612,7 +615,7 @@ have a reference count on it, you almost certainly have a bug. Names of macros defining constants and labels in enums are capitalized. -#define CONSTANT 0x12345 + #define CONSTANT 0x12345 Enums are preferred when defining several related constants. @@ -623,28 +626,28 @@ Generally, inline functions are preferable to macros resembling functions. Macros with multiple statements should be enclosed in a do - while block: -#define macrofun(a, b, c) \ - do { \ - if (a == 5) \ - do_this(b, c); \ - } while (0) + #define macrofun(a, b, c) \ + do { \ + if (a == 5) \ + do_this(b, c); \ + } while (0) Things to avoid when using macros: 1) macros that affect control flow: -#define FOO(x) \ - do { \ - if (blah(x) < 0) \ - return -EBUGGERED; \ - } while(0) + #define FOO(x) \ + do { \ + if (blah(x) < 0) \ + return -EBUGGERED; \ + } while(0) is a _very_ bad idea. It looks like a function call but exits the "calling" function; don't break the internal parsers of those who will read the code. 2) macros that depend on having a local variable with a magic name: -#define FOO(val) bar(index, val) + #define FOO(val) bar(index, val) might look like a good thing, but it's confusing as hell when one reads the code and it's prone to breakage from seemingly innocent changes. @@ -656,8 +659,21 @@ bite you if somebody e.g. turns FOO into an inline function. must enclose the expression in parentheses. Beware of similar issues with macros using parameters. -#define CONSTANT 0x4000 -#define CONSTEXP (CONSTANT | 3) + #define CONSTANT 0x4000 + #define CONSTEXP (CONSTANT | 3) + +5) namespace collisions when defining local variables in macros resembling +functions: + +#define FOO(x) \ +({ \ + typeof(x) ret; \ + ret = calc_ret(x); \ + (ret); \ +)} + +ret is a common name for a local variable - __foo_ret is less likely +to collide with an existing variable. The cpp manual deals with macros exhaustively. The gcc internals manual also covers RTL which is used frequently with assembly language in the kernel. @@ -796,11 +812,11 @@ you should use, rather than explicitly coding some variant of them yourself. For example, if you need to calculate the length of an array, take advantage of the macro - #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) + #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) Similarly, if you need to calculate the size of some structure member, use - #define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) + #define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) There are also min() and max() macros that do strict type checking if you need them. Feel free to peruse that header file to see what else is already @@ -813,19 +829,19 @@ Some editors can interpret configuration information embedded in source files, indicated with special markers. For example, emacs interprets lines marked like this: --*- mode: c -*- + -*- mode: c -*- Or like this: -/* -Local Variables: -compile-command: "gcc -DMAGIC_DEBUG_FLAG foo.c" -End: -*/ + /* + Local Variables: + compile-command: "gcc -DMAGIC_DEBUG_FLAG foo.c" + End: + */ Vim interprets markers that look like this: -/* vim:set sw=8 noet */ + /* vim:set sw=8 noet */ Do not include any of these in source files. People have their own personal editor configurations, and your source files should not override them. This @@ -902,9 +918,9 @@ At the end of any non-trivial #if or #ifdef block (more than a few lines), place a comment after the #endif on the same line, noting the conditional expression used. For instance: -#ifdef CONFIG_SOMETHING -... -#endif /* CONFIG_SOMETHING */ + #ifdef CONFIG_SOMETHING + ... + #endif /* CONFIG_SOMETHING */ Appendix I: References diff --git a/Documentation/DocBook/crypto-API.tmpl b/Documentation/DocBook/crypto-API.tmpl index 04a8c24ead47749f24359879557834ff577648a7..efc8d90a9a3f454541a468e3564924b9484d4b94 100644 --- a/Documentation/DocBook/crypto-API.tmpl +++ b/Documentation/DocBook/crypto-API.tmpl @@ -509,6 +509,270 @@ select it due to the used type and mask field. + + Internal Structure of Kernel Crypto API + + + The kernel crypto API has an internal structure where a cipher + implementation may use many layers and indirections. This section + shall help to clarify how the kernel crypto API uses + various components to implement the complete cipher. + + + + The following subsections explain the internal structure based + on existing cipher implementations. The first section addresses + the most complex scenario where all other scenarios form a logical + subset. + + + Generic AEAD Cipher Structure + + + The following ASCII art decomposes the kernel crypto API layers + when using the AEAD cipher with the automated IV generation. The + shown example is used by the IPSEC layer. + + + + For other use cases of AEAD ciphers, the ASCII art applies as + well, but the caller may not use the GIVCIPHER interface. In + this case, the caller must generate the IV. + + + + The depicted example decomposes the AEAD cipher of GCM(AES) based + on the generic C implementations (gcm.c, aes-generic.c, ctr.c, + ghash-generic.c, seqiv.c). The generic implementation serves as an + example showing the complete logic of the kernel crypto API. + + + + It is possible that some streamlined cipher implementations (like + AES-NI) provide implementations merging aspects which in the view + of the kernel crypto API cannot be decomposed into layers any more. + In case of the AES-NI implementation, the CTR mode, the GHASH + implementation and the AES cipher are all merged into one cipher + implementation registered with the kernel crypto API. In this case, + the concept described by the following ASCII art applies too. However, + the decomposition of GCM into the individual sub-components + by the kernel crypto API is not done any more. + + + + Each block in the following ASCII art is an independent cipher + instance obtained from the kernel crypto API. Each block + is accessed by the caller or by other blocks using the API functions + defined by the kernel crypto API for the cipher implementation type. + + + + The blocks below indicate the cipher type as well as the specific + logic implemented in the cipher. + + + + The ASCII art picture also indicates the call structure, i.e. who + calls which component. The arrows point to the invoked block + where the caller uses the API applicable to the cipher type + specified for the block. + + + + + + + + The following call sequence is applicable when the IPSEC layer + triggers an encryption operation with the esp_output function. During + configuration, the administrator set up the use of rfc4106(gcm(aes)) as + the cipher for ESP. The following call sequence is now depicted in the + ASCII art above: + + + + + + esp_output() invokes crypto_aead_givencrypt() to trigger an encryption + operation of the GIVCIPHER implementation. + + + + In case of GCM, the SEQIV implementation is registered as GIVCIPHER + in crypto_rfc4106_alloc(). + + + + The SEQIV performs its operation to generate an IV where the core + function is seqiv_geniv(). + + + + + + Now, SEQIV uses the AEAD API function calls to invoke the associated + AEAD cipher. In our case, during the instantiation of SEQIV, the + cipher handle for GCM is provided to SEQIV. This means that SEQIV + invokes AEAD cipher operations with the GCM cipher handle. + + + + During instantiation of the GCM handle, the CTR(AES) and GHASH + ciphers are instantiated. The cipher handles for CTR(AES) and GHASH + are retained for later use. + + + + The GCM implementation is responsible to invoke the CTR mode AES and + the GHASH cipher in the right manner to implement the GCM + specification. + + + + + + The GCM AEAD cipher type implementation now invokes the ABLKCIPHER API + with the instantiated CTR(AES) cipher handle. + + + + During instantiation of the CTR(AES) cipher, the CIPHER type + implementation of AES is instantiated. The cipher handle for AES is + retained. + + + + That means that the ABLKCIPHER implementation of CTR(AES) only + implements the CTR block chaining mode. After performing the block + chaining operation, the CIPHER implementation of AES is invoked. + + + + + + The ABLKCIPHER of CTR(AES) now invokes the CIPHER API with the AES + cipher handle to encrypt one block. + + + + + + The GCM AEAD implementation also invokes the GHASH cipher + implementation via the AHASH API. + + + + + + When the IPSEC layer triggers the esp_input() function, the same call + sequence is followed with the only difference that the operation starts + with step (2). + + + + Generic Block Cipher Structure + + Generic block ciphers follow the same concept as depicted with the ASCII + art picture above. + + + + For example, CBC(AES) is implemented with cbc.c, and aes-generic.c. The + ASCII art picture above applies as well with the difference that only + step (4) is used and the ABLKCIPHER block chaining mode is CBC. + + + + Generic Keyed Message Digest Structure + + Keyed message digest implementations again follow the same concept as + depicted in the ASCII art picture above. + + + + For example, HMAC(SHA256) is implemented with hmac.c and + sha256_generic.c. The following ASCII art illustrates the + implementation: + + + + + + + + The following call sequence is applicable when a caller triggers + an HMAC operation: + + + + + + The AHASH API functions are invoked by the caller. The HMAC + implementation performs its operation as needed. + + + + During initialization of the HMAC cipher, the SHASH cipher type of + SHA256 is instantiated. The cipher handle for the SHA256 instance is + retained. + + + + At one time, the HMAC implementation requires a SHA256 operation + where the SHA256 cipher handle is used. + + + + + + The HMAC instance now invokes the SHASH API with the SHA256 + cipher handle to calculate the message digest. + + + + + Developing Cipher Algorithms @@ -808,6 +1072,602 @@ + User Space Interface + Introduction + + The concepts of the kernel crypto API visible to kernel space is fully + applicable to the user space interface as well. Therefore, the kernel + crypto API high level discussion for the in-kernel use cases applies + here as well. + + + + The major difference, however, is that user space can only act as a + consumer and never as a provider of a transformation or cipher algorithm. + + + + The following covers the user space interface exported by the kernel + crypto API. A working example of this description is libkcapi that + can be obtained from [1]. That library can be used by user space + applications that require cryptographic services from the kernel. + + + + Some details of the in-kernel kernel crypto API aspects do not + apply to user space, however. This includes the difference between + synchronous and asynchronous invocations. The user space API call + is fully synchronous. + + + + [1] http://www.chronox.de/libkcapi.html + + + + + User Space API General Remarks + + The kernel crypto API is accessible from user space. Currently, + the following ciphers are accessible: + + + + + Message digest including keyed message digest (HMAC, CMAC) + + + + Symmetric ciphers + + + + AEAD ciphers + + + + Random Number Generators + + + + + The interface is provided via socket type using the type AF_ALG. + In addition, the setsockopt option type is SOL_ALG. In case the + user space header files do not export these flags yet, use the + following macros: + + + +#ifndef AF_ALG +#define AF_ALG 38 +#endif +#ifndef SOL_ALG +#define SOL_ALG 279 +#endif + + + + A cipher is accessed with the same name as done for the in-kernel + API calls. This includes the generic vs. unique naming schema for + ciphers as well as the enforcement of priorities for generic names. + + + + To interact with the kernel crypto API, a socket must be + created by the user space application. User space invokes the cipher + operation with the send()/write() system call family. The result of the + cipher operation is obtained with the read()/recv() system call family. + + + + The following API calls assume that the socket descriptor + is already opened by the user space application and discusses only + the kernel crypto API specific invocations. + + + + To initialize the socket interface, the following sequence has to + be performed by the consumer: + + + + + + Create a socket of type AF_ALG with the struct sockaddr_alg + parameter specified below for the different cipher types. + + + + + + Invoke bind with the socket descriptor + + + + + + Invoke accept with the socket descriptor. The accept system call + returns a new file descriptor that is to be used to interact with + the particular cipher instance. When invoking send/write or recv/read + system calls to send data to the kernel or obtain data from the + kernel, the file descriptor returned by accept must be used. + + + + + + In-place Cipher operation + + Just like the in-kernel operation of the kernel crypto API, the user + space interface allows the cipher operation in-place. That means that + the input buffer used for the send/write system call and the output + buffer used by the read/recv system call may be one and the same. + This is of particular interest for symmetric cipher operations where a + copying of the output data to its final destination can be avoided. + + + + If a consumer on the other hand wants to maintain the plaintext and + the ciphertext in different memory locations, all a consumer needs + to do is to provide different memory pointers for the encryption and + decryption operation. + + + + Message Digest API + + The message digest type to be used for the cipher operation is + selected when invoking the bind syscall. bind requires the caller + to provide a filled struct sockaddr data structure. This data + structure must be filled as follows: + + + +struct sockaddr_alg sa = { + .salg_family = AF_ALG, + .salg_type = "hash", /* this selects the hash logic in the kernel */ + .salg_name = "sha1" /* this is the cipher name */ +}; + + + + The salg_type value "hash" applies to message digests and keyed + message digests. Though, a keyed message digest is referenced by + the appropriate salg_name. Please see below for the setsockopt + interface that explains how the key can be set for a keyed message + digest. + + + + Using the send() system call, the application provides the data that + should be processed with the message digest. The send system call + allows the following flags to be specified: + + + + + + MSG_MORE: If this flag is set, the send system call acts like a + message digest update function where the final hash is not + yet calculated. If the flag is not set, the send system call + calculates the final message digest immediately. + + + + + + With the recv() system call, the application can read the message + digest from the kernel crypto API. If the buffer is too small for the + message digest, the flag MSG_TRUNC is set by the kernel. + + + + In order to set a message digest key, the calling application must use + the setsockopt() option of ALG_SET_KEY. If the key is not set the HMAC + operation is performed without the initial HMAC state change caused by + the key. + + + + Symmetric Cipher API + + The operation is very similar to the message digest discussion. + During initialization, the struct sockaddr data structure must be + filled as follows: + + + +struct sockaddr_alg sa = { + .salg_family = AF_ALG, + .salg_type = "skcipher", /* this selects the symmetric cipher */ + .salg_name = "cbc(aes)" /* this is the cipher name */ +}; + + + + Before data can be sent to the kernel using the write/send system + call family, the consumer must set the key. The key setting is + described with the setsockopt invocation below. + + + + Using the sendmsg() system call, the application provides the data that should be processed for encryption or decryption. In addition, the IV is + specified with the data structure provided by the sendmsg() system call. + + + + The sendmsg system call parameter of struct msghdr is embedded into the + struct cmsghdr data structure. See recv(2) and cmsg(3) for more + information on how the cmsghdr data structure is used together with the + send/recv system call family. That cmsghdr data structure holds the + following information specified with a separate header instances: + + + + + + specification of the cipher operation type with one of these flags: + + + + ALG_OP_ENCRYPT - encryption of data + + + ALG_OP_DECRYPT - decryption of data + + + + + + + specification of the IV information marked with the flag ALG_SET_IV + + + + + + The send system call family allows the following flag to be specified: + + + + + + MSG_MORE: If this flag is set, the send system call acts like a + cipher update function where more input data is expected + with a subsequent invocation of the send system call. + + + + + + Note: The kernel reports -EINVAL for any unexpected data. The caller + must make sure that all data matches the constraints given in + /proc/crypto for the selected cipher. + + + + With the recv() system call, the application can read the result of + the cipher operation from the kernel crypto API. The output buffer + must be at least as large as to hold all blocks of the encrypted or + decrypted data. If the output data size is smaller, only as many + blocks are returned that fit into that output buffer size. + + + + AEAD Cipher API + + The operation is very similar to the symmetric cipher discussion. + During initialization, the struct sockaddr data structure must be + filled as follows: + + + +struct sockaddr_alg sa = { + .salg_family = AF_ALG, + .salg_type = "aead", /* this selects the symmetric cipher */ + .salg_name = "gcm(aes)" /* this is the cipher name */ +}; + + + + Before data can be sent to the kernel using the write/send system + call family, the consumer must set the key. The key setting is + described with the setsockopt invocation below. + + + + In addition, before data can be sent to the kernel using the + write/send system call family, the consumer must set the authentication + tag size. To set the authentication tag size, the caller must use the + setsockopt invocation described below. + + + + Using the sendmsg() system call, the application provides the data that should be processed for encryption or decryption. In addition, the IV is + specified with the data structure provided by the sendmsg() system call. + + + + The sendmsg system call parameter of struct msghdr is embedded into the + struct cmsghdr data structure. See recv(2) and cmsg(3) for more + information on how the cmsghdr data structure is used together with the + send/recv system call family. That cmsghdr data structure holds the + following information specified with a separate header instances: + + + + + + specification of the cipher operation type with one of these flags: + + + + ALG_OP_ENCRYPT - encryption of data + + + ALG_OP_DECRYPT - decryption of data + + + + + + + specification of the IV information marked with the flag ALG_SET_IV + + + + + + specification of the associated authentication data (AAD) with the + flag ALG_SET_AEAD_ASSOCLEN. The AAD is sent to the kernel together + with the plaintext / ciphertext. See below for the memory structure. + + + + + + The send system call family allows the following flag to be specified: + + + + + + MSG_MORE: If this flag is set, the send system call acts like a + cipher update function where more input data is expected + with a subsequent invocation of the send system call. + + + + + + Note: The kernel reports -EINVAL for any unexpected data. The caller + must make sure that all data matches the constraints given in + /proc/crypto for the selected cipher. + + + + With the recv() system call, the application can read the result of + the cipher operation from the kernel crypto API. The output buffer + must be at least as large as defined with the memory structure below. + If the output data size is smaller, the cipher operation is not performed. + + + + The authenticated decryption operation may indicate an integrity error. + Such breach in integrity is marked with the -EBADMSG error code. + + + AEAD Memory Structure + + The AEAD cipher operates with the following information that + is communicated between user and kernel space as one data stream: + + + + + plaintext or ciphertext + + + + associated authentication data (AAD) + + + + authentication tag + + + + + The sizes of the AAD and the authentication tag are provided with + the sendmsg and setsockopt calls (see there). As the kernel knows + the size of the entire data stream, the kernel is now able to + calculate the right offsets of the data components in the data + stream. + + + + The user space caller must arrange the aforementioned information + in the following order: + + + + + + AEAD encryption input: AAD || plaintext + + + + + + AEAD decryption input: AAD || ciphertext || authentication tag + + + + + + The output buffer the user space caller provides must be at least as + large to hold the following data: + + + + + + AEAD encryption output: ciphertext || authentication tag + + + + + + AEAD decryption output: plaintext + + + + + + + Random Number Generator API + + Again, the operation is very similar to the other APIs. + During initialization, the struct sockaddr data structure must be + filled as follows: + + + +struct sockaddr_alg sa = { + .salg_family = AF_ALG, + .salg_type = "rng", /* this selects the symmetric cipher */ + .salg_name = "drbg_nopr_sha256" /* this is the cipher name */ +}; + + + + Depending on the RNG type, the RNG must be seeded. The seed is provided + using the setsockopt interface to set the key. For example, the + ansi_cprng requires a seed. The DRBGs do not require a seed, but + may be seeded. + + + + Using the read()/recvmsg() system calls, random numbers can be obtained. + The kernel generates at most 128 bytes in one call. If user space + requires more data, multiple calls to read()/recvmsg() must be made. + + + + WARNING: The user space caller may invoke the initially mentioned + accept system call multiple times. In this case, the returned file + descriptors have the same state. + + + + + Zero-Copy Interface + + In addition to the send/write/read/recv system call familty, the AF_ALG + interface can be accessed with the zero-copy interface of splice/vmsplice. + As the name indicates, the kernel tries to avoid a copy operation into + kernel space. + + + + The zero-copy operation requires data to be aligned at the page boundary. + Non-aligned data can be used as well, but may require more operations of + the kernel which would defeat the speed gains obtained from the zero-copy + interface. + + + + The system-interent limit for the size of one zero-copy operation is + 16 pages. If more data is to be sent to AF_ALG, user space must slice + the input into segments with a maximum size of 16 pages. + + + + Zero-copy can be used with the following code example (a complete working + example is provided with libkcapi): + + + +int pipes[2]; + +pipe(pipes); +/* input data in iov */ +vmsplice(pipes[1], iov, iovlen, SPLICE_F_GIFT); +/* opfd is the file descriptor returned from accept() system call */ +splice(pipes[0], NULL, opfd, NULL, ret, 0); +read(opfd, out, outlen); + + + + + Setsockopt Interface + + In addition to the read/recv and send/write system call handling + to send and retrieve data subject to the cipher operation, a consumer + also needs to set the additional information for the cipher operation. + This additional information is set using the setsockopt system call + that must be invoked with the file descriptor of the open cipher + (i.e. the file descriptor returned by the accept system call). + + + + Each setsockopt invocation must use the level SOL_ALG. + + + + The setsockopt interface allows setting the following data using + the mentioned optname: + + + + + + ALG_SET_KEY -- Setting the key. Key setting is applicable to: + + + + the skcipher cipher type (symmetric ciphers) + + + the hash cipher type (keyed message digests) + + + the AEAD cipher type + + + the RNG cipher type to provide the seed + + + + + + + ALG_SET_AEAD_AUTHSIZE -- Setting the authentication tag size + for AEAD ciphers. For a encryption operation, the authentication + tag of the given size will be generated. For a decryption operation, + the provided ciphertext is assumed to contain an authentication tag + of the given size (see section about AEAD memory layout below). + + + + + + + User space API example + + Please see [1] for libkcapi which provides an easy-to-use wrapper + around the aforementioned Netlink kernel interface. [1] also contains + a test application that invokes all libkcapi API calls. + + + + [1] http://www.chronox.de/libkcapi.html + + + + + + Programming Interface Block Cipher Context Data Structures !Pinclude/linux/crypto.h Block Cipher Context Data Structures diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 03f1985a4bd1876d7b3e78d70b0c6939ef709eab..9765a4c0829df4307efaf773d8b887b35270ad31 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -1293,7 +1293,7 @@ int max_width, max_height; If a page flip can be successfully scheduled the driver must set the - drm_crtc-<fb field to the new framebuffer pointed to + drm_crtc->fb field to the new framebuffer pointed to by fb. This is important so that the reference counting on framebuffers stays balanced. @@ -3979,6 +3979,11 @@ int num_ioctls; !Fdrivers/gpu/drm/i915/i915_irq.c intel_runtime_pm_disable_interrupts !Fdrivers/gpu/drm/i915/i915_irq.c intel_runtime_pm_enable_interrupts + + Intel GVT-g Guest Support(vGPU) +!Pdrivers/gpu/drm/i915/i915_vgpu.c Intel GVT-g guest support +!Idrivers/gpu/drm/i915/i915_vgpu.c + Display Hardware Handling @@ -4046,6 +4051,17 @@ int num_ioctls; Frame Buffer Compression (FBC) !Pdrivers/gpu/drm/i915/intel_fbc.c Frame Buffer Compression (FBC) !Idrivers/gpu/drm/i915/intel_fbc.c + + + Display Refresh Rate Switching (DRRS) +!Pdrivers/gpu/drm/i915/intel_dp.c Display Refresh Rate Switching (DRRS) +!Fdrivers/gpu/drm/i915/intel_dp.c intel_dp_set_drrs_state +!Fdrivers/gpu/drm/i915/intel_dp.c intel_edp_drrs_enable +!Fdrivers/gpu/drm/i915/intel_dp.c intel_edp_drrs_disable +!Fdrivers/gpu/drm/i915/intel_dp.c intel_edp_drrs_invalidate +!Fdrivers/gpu/drm/i915/intel_dp.c intel_edp_drrs_flush +!Fdrivers/gpu/drm/i915/intel_dp.c intel_dp_drrs_init + DPIO @@ -4168,7 +4184,7 @@ int num_ioctls; Buffer Object Eviction - This section documents the interface function for evicting buffer + This section documents the interface functions for evicting buffer objects to make space available in the virtual gpu address spaces. Note that this is mostly orthogonal to shrinking buffer objects caches, which has the goal to make main memory (shared with the gpu @@ -4176,6 +4192,17 @@ int num_ioctls; !Idrivers/gpu/drm/i915/i915_gem_evict.c + + Buffer Object Memory Shrinking + + This section documents the interface function for shrinking memory + usage of buffer object caches. Shrinking is used to make main memory + available. Note that this is mostly orthogonal to evicting buffer + objects, which has the goal to make space in gpu virtual address + spaces. + +!Idrivers/gpu/drm/i915/i915_gem_shrinker.c + diff --git a/Documentation/DocBook/media/v4l/biblio.xml b/Documentation/DocBook/media/v4l/biblio.xml index 7ff01a23c2fe4835d848d6353e8bb78d66dc56eb..fdee6b3f3ecaaaabbbf7d3cd5b62cd8b3d1be257 100644 --- a/Documentation/DocBook/media/v4l/biblio.xml +++ b/Documentation/DocBook/media/v4l/biblio.xml @@ -1,14 +1,13 @@ References - - EIA 608-B + + CEA 608-E - Electronic Industries Alliance (http://www.eia.org) + Consumer Electronics Association (http://www.ce.org) - EIA 608-B "Recommended Practice for Line 21 Data -Service" + CEA-608-E R-2014 "Line 21 Data Services" diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index 350dfb3d71ea736aeeb379dcb69256b561c8a734..a0aef85d33c1f94041d46bd7f48db037385522cc 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -2491,7 +2491,7 @@ that used it. It was originally scheduled for removal in 2.6.35. Added V4L2_EVENT_CTRL_CH_RANGE control event - changes flag. See . + changes flag. See . diff --git a/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml b/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml index 7a8bf3011ee999861b3c338f1b47316052f99a85..0aec62ed2bf8e1a00e40b8025316c1fac00b6613 100644 --- a/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml +++ b/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml @@ -254,7 +254,7 @@ ETS 300 231, lsb first transmitted. V4L2_SLICED_CAPTION_525 0x1000 - + NTSC line 21, 284 (second field 21) Two bytes in transmission order, including parity bit, lsb first transmitted. diff --git a/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml b/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml index 116c301656e0bde1732c2e0dbe124cc68285ad8d..5872f8bbf7747efb848daf103b3d70271b18e1c6 100644 --- a/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml +++ b/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml @@ -143,86 +143,28 @@ struct - v4l + dev - Valid for V4L sub-devices and nodes only. + Valid for (sub-)devices that create a single device node. __u32 major - V4L device node major number. For V4L sub-devices with no - device node, set by the driver to 0. + Device node major number. __u32 minor - V4L device node minor number. For V4L sub-devices with no - device node, set by the driver to 0. - - - - struct - fb - - Valid for frame buffer nodes only. - - - - - __u32 - major - Frame buffer device node major number. - - - - - __u32 - minor - Frame buffer device node minor number. - - - - struct - alsa - - Valid for ALSA devices only. - - - - - __u32 - card - ALSA card number - - - - - __u32 - device - ALSA device number - - - - - __u32 - subdevice - ALSA sub-device number - - - - int - dvb - - DVB card number + Device node minor number. __u8 - raw[180] + raw[184] @@ -253,8 +195,24 @@ ALSA card - MEDIA_ENT_T_DEVNODE_DVB - DVB card + MEDIA_ENT_T_DEVNODE_DVB_FE + DVB frontend devnode + + + MEDIA_ENT_T_DEVNODE_DVB_DEMUX + DVB demux devnode + + + MEDIA_ENT_T_DEVNODE_DVB_DVR + DVB DVR devnode + + + MEDIA_ENT_T_DEVNODE_DVB_CA + DVB CAM devnode + + + MEDIA_ENT_T_DEVNODE_DVB_NET + DVB network devnode MEDIA_ENT_T_V4L2_SUBDEV @@ -282,6 +240,10 @@ it in some digital video standard, with appropriate embedded timing signals. + + MEDIA_ENT_T_V4L2_SUBDEV_TUNER + TV and/or radio tuner + diff --git a/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml b/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml index 6ab4f0f3db64abdc9de76ff3ccf458881f9b49e2..b60fb935b91b8b9282344fd5b17a3650ce150800 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml @@ -303,45 +303,6 @@ for a pixel lie next to each other in memory. b1 b0 - - V4L2_PIX_FMT_BGR666 - 'BGRH' - - b5 - b4 - b3 - b2 - b1 - b0 - g5 - g4 - - g3 - g2 - g1 - g0 - r5 - r4 - r3 - r2 - - r1 - r0 - - - - - - - - - - - - - - - V4L2_PIX_FMT_BGR24 'BGR3' @@ -404,6 +365,46 @@ for a pixel lie next to each other in memory. b1 b0 + + V4L2_PIX_FMT_BGR666 + 'BGRH' + + b5 + b4 + b3 + b2 + b1 + b0 + g5 + g4 + + g3 + g2 + g1 + g0 + r5 + r4 + r3 + r2 + + r1 + r0 + - + - + - + - + - + - + + - + - + - + - + - + - + - + - + V4L2_PIX_FMT_ABGR32 'AR24' diff --git a/Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml b/Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml index 19727ab4c75752035bc59c89b693a0a3242c95cf..7803b8c41b45d2ffd2000d91abf8152886dd2654 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml @@ -38,10 +38,10 @@ columns and rows. start + 4: - R10 - B11 - R12 - B13 + B10 + G11 + B12 + G13 start + 8: @@ -52,10 +52,10 @@ columns and rows. start + 12: - R30 - B31 - R32 - B33 + B30 + G31 + B32 + G33 diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10p.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10p.xml index 30aa63581fe33d224f060acab75f9faef3b10c3e..a8cc102cde4fc3e5b446822cfb66f5493523ef38 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-srggb10p.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10p.xml @@ -38,7 +38,7 @@ Byte Order. Each cell is one byte. - + diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml index 60308f1eefdfea59a33d83f30d32747c8f5c1aa4..e781cc61786c52b93f3f2973110f6040c56dac0e 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml @@ -29,12 +29,12 @@ and Cr planes have half as many pad bytes after their rows. In other words, two Cx rows (including padding) is exactly as long as one Y row (including padding). - V4L2_PIX_FMT_NV12M is intended to be + V4L2_PIX_FMT_YUV420M is intended to be used only in drivers and applications that support the multi-planar API, described in . - <constant>V4L2_PIX_FMT_YVU420M</constant> 4 × 4 + <title><constant>V4L2_PIX_FMT_YUV420M</constant> 4 × 4 pixel image diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml index 5e0352c5032414bf7e89ed34ed4c1b875998798d..fcde4e20205e18885419176491f0fec863e87dfd 100644 --- a/Documentation/DocBook/media/v4l/pixfmt.xml +++ b/Documentation/DocBook/media/v4l/pixfmt.xml @@ -80,9 +80,9 @@ padding bytes after the last line of an image cross a system page boundary. Input devices may write padding bytes, the value is undefined. Output devices ignore the contents of padding bytes.When the image format is planar the -bytesperline value applies to the largest +bytesperline value applies to the first plane and is divided by the same factor as the -width field for any smaller planes. For +width field for the other planes. For example the Cb and Cr planes of a YUV 4:2:0 image have half as many padding bytes following each line as the Y plane. To avoid ambiguities drivers must return a bytesperline value @@ -182,14 +182,14 @@ see . - __u16 + __u32 bytesperline Distance in bytes between the leftmost pixels in two adjacent lines. See &v4l2-pix-format;. __u16 - reserved[7] + reserved[6] Reserved for future extensions. Should be zeroed by the application. @@ -483,8 +483,8 @@ is the Y'CbCr encoding identifier (&v4l2-ycbcr-encoding;) to specify non-standar Y'CbCr encodings and the third is the quantization identifier (&v4l2-quantization;) to specify non-standard quantization methods. Most of the time only the colorspace field of &v4l2-pix-format; or &v4l2-pix-format-mplane; needs to be filled in. Note -that the default R'G'B' quantization is always full range for all colorspaces, -so this won't be mentioned explicitly for each colorspace description. +that the default R'G'B' quantization is full range for all colorspaces except for +BT.2020 which uses limited range R'G'B' quantization. V4L2 Colorspaces @@ -598,7 +598,8 @@ so this won't be mentioned explicitly for each colorspace description. V4L2_QUANTIZATION_DEFAULT Use the default quantization encoding as defined by the colorspace. -This is always full range for R'G'B' and usually limited range for Y'CbCr. +This is always full range for R'G'B' (except for the BT.2020 colorspace) and usually +limited range for Y'CbCr. V4L2_QUANTIZATION_FULL_RANGE @@ -620,8 +621,8 @@ is mapped to [16…235]. Cb and Cr are mapped from [-0.5…0.5] to [16
Detailed Colorspace Descriptions -
- Colorspace SMPTE 170M (<constant>V4L2_COLORSPACE_SMPTE170M</constant>) +
+ Colorspace SMPTE 170M (<constant>V4L2_COLORSPACE_SMPTE170M</constant>) The standard defines the colorspace used by NTSC and PAL and by SDTV in general. The default Y'CbCr encoding is V4L2_YCBCR_ENC_601. The default Y'CbCr quantization is limited range. The chromaticities of the primary colors and @@ -666,8 +667,7 @@ as the SMPTE C set, so this colorspace is sometimes called SMPTE C as well. The transfer function defined for SMPTE 170M is the same as the -one defined in Rec. 709. Normally L is in the range [0…1], but for the extended -gamut xvYCC encoding values outside that range are allowed. +one defined in Rec. 709. L' = -1.099(-L)0.45 + 0.099 for L ≤ -0.018 L' = 4.5L for -0.018 < L < 0.018 @@ -702,29 +702,10 @@ defined in the standard and this colorspace is sometim though BT.601 does not mention any color primaries. The default quantization is limited range, but full range is possible although rarely seen. - The V4L2_YCBCR_ENC_601 encoding as described above is the -default for this colorspace, but it can be overridden with V4L2_YCBCR_ENC_709, -in which case the Rec. 709 Y'CbCr encoding is used. - - - The xvYCC 601 encoding (V4L2_YCBCR_ENC_XV601, ) is similar -to the BT.601 encoding, but it allows for R', G' and B' values that are outside the range -[0…1]. The resulting Y', Cb and Cr values are scaled and offset: - - Y' = (219 / 255) * (0.299R' + 0.587G' + 0.114B') + (16 / 255) - Cb = (224 / 255) * (-0.169R' - 0.331G' + 0.5B') - Cr = (224 / 255) * (0.5R' - 0.419G' - 0.081B') - - - - Y' is clamped to the range [0…1] and Cb and Cr are clamped -to the range [-0.5…0.5]. The non-standard xvYCC 709 encoding can also be used by selecting -V4L2_YCBCR_ENC_XV709. The xvYCC encodings always use full range -quantization.
-
- Colorspace Rec. 709 (<constant>V4L2_COLORSPACE_REC709</constant>) +
+ Colorspace Rec. 709 (<constant>V4L2_COLORSPACE_REC709</constant>) The standard defines the colorspace used by HDTV in general. The default Y'CbCr encoding is V4L2_YCBCR_ENC_709. The default Y'CbCr quantization is limited range. The chromaticities of the primary colors and the white reference are: @@ -803,26 +784,39 @@ rarely seen. The V4L2_YCBCR_ENC_709 encoding described above is the default for this colorspace, but it can be overridden with V4L2_YCBCR_ENC_601, in which case the BT.601 Y'CbCr encoding is used. + Two additional extended gamut Y'CbCr encodings are also possible with this colorspace: The xvYCC 709 encoding (V4L2_YCBCR_ENC_XV709, ) is similar to the Rec. 709 encoding, but it allows for R', G' and B' values that are outside the range [0…1]. The resulting Y', Cb and Cr values are scaled and offset: - Y' = (219 / 255) * (0.2126R' + 0.7152G' + 0.0722B') + (16 / 255) - Cb = (224 / 255) * (-0.1146R' - 0.3854G' + 0.5B') - Cr = (224 / 255) * (0.5R' - 0.4542G' - 0.0458B') + Y' = (219 / 256) * (0.2126R' + 0.7152G' + 0.0722B') + (16 / 256) + Cb = (224 / 256) * (-0.1146R' - 0.3854G' + 0.5B') + Cr = (224 / 256) * (0.5R' - 0.4542G' - 0.0458B') + + + + + + The xvYCC 601 encoding (V4L2_YCBCR_ENC_XV601, ) is similar +to the BT.601 encoding, but it allows for R', G' and B' values that are outside the range +[0…1]. The resulting Y', Cb and Cr values are scaled and offset: + + Y' = (219 / 256) * (0.299R' + 0.587G' + 0.114B') + (16 / 256) + Cb = (224 / 256) * (-0.169R' - 0.331G' + 0.5B') + Cr = (224 / 256) * (0.5R' - 0.419G' - 0.081B') Y' is clamped to the range [0…1] and Cb and Cr are clamped -to the range [-0.5…0.5]. The non-standard xvYCC 601 encoding can also be used by -selecting V4L2_YCBCR_ENC_XV601. The xvYCC encodings always use full -range quantization. +to the range [-0.5…0.5]. The non-standard xvYCC 709 or xvYCC 601 encodings can be used by +selecting V4L2_YCBCR_ENC_XV709 or V4L2_YCBCR_ENC_XV601. +The xvYCC encodings always use full range quantization.
-
- Colorspace sRGB (<constant>V4L2_COLORSPACE_SRGB</constant>) +
+ Colorspace sRGB (<constant>V4L2_COLORSPACE_SRGB</constant>) The standard defines the colorspace used by most webcams and computer graphics. The default Y'CbCr encoding is V4L2_YCBCR_ENC_SYCC. The default Y'CbCr quantization is full range. The chromaticities of the primary colors and the white reference are: @@ -898,8 +892,8 @@ encoding, it is not. The V4L2_YCBCR_ENC_XV601 scales and of values before quantization, but this encoding does not do that.
-
- Colorspace Adobe RGB (<constant>V4L2_COLORSPACE_ADOBERGB</constant>) +
+ Colorspace Adobe RGB (<constant>V4L2_COLORSPACE_ADOBERGB</constant>) The standard defines the colorspace used by computer graphics that use the AdobeRGB colorspace. This is also known as the standard. The default Y'CbCr encoding is V4L2_YCBCR_ENC_601. The default Y'CbCr @@ -970,12 +964,12 @@ clamped to the range [-0.5…0.5]. This transform is identical to one defin SMPTE 170M/BT.601. The Y'CbCr quantization is limited range.
-
- Colorspace BT.2020 (<constant>V4L2_COLORSPACE_BT2020</constant>) +
+ Colorspace BT.2020 (<constant>V4L2_COLORSPACE_BT2020</constant>) The standard defines the colorspace used by Ultra-high definition television (UHDTV). The default Y'CbCr encoding is V4L2_YCBCR_ENC_BT2020. -The default Y'CbCr quantization is limited range. The chromaticities of the primary colors and -the white reference are: +The default R'G'B' quantization is limited range (!), and so is the default Y'CbCr quantization. +The chromaticities of the primary colors and the white reference are:
BT.2020 Chromaticities @@ -1032,7 +1026,7 @@ the white reference are: The luminance (Y') and color difference (Cb and Cr) are obtained with the following V4L2_YCBCR_ENC_BT2020 encoding: - Y' = 0.2627R' + 0.6789G' + 0.0593B' + Y' = 0.2627R' + 0.6780G' + 0.0593B' Cb = -0.1396R' - 0.3604G' + 0.5B' Cr = 0.5R' - 0.4598G' - 0.0402B' @@ -1046,7 +1040,7 @@ clamped to the range [-0.5…0.5]. The Y'CbCr quantization is limited range Luma: - Yc' = (0.2627R + 0.6789G + 0.0593B)' + Yc' = (0.2627R + 0.6780G + 0.0593B)' @@ -1054,7 +1048,7 @@ clamped to the range [-0.5…0.5]. The Y'CbCr quantization is limited range B' - Yc' ≤ 0: - Cbc = (B' - Y') / 1.9404 + Cbc = (B' - Yc') / 1.9404 @@ -1062,7 +1056,7 @@ clamped to the range [-0.5…0.5]. The Y'CbCr quantization is limited range B' - Yc' > 0: - Cbc = (B' - Y') / 1.5816 + Cbc = (B' - Yc') / 1.5816 @@ -1086,8 +1080,8 @@ clamped to the range [-0.5…0.5]. The Y'CbCr quantization is limited range clamped to the range [-0.5…0.5]. The Yc'CbcCrc quantization is limited range. -
- Colorspace SMPTE 240M (<constant>V4L2_COLORSPACE_SMPTE240M</constant>) +
+ Colorspace SMPTE 240M (<constant>V4L2_COLORSPACE_SMPTE240M</constant>) The standard was an interim standard used during the early days of HDTV (1988-1998). It has been superseded by Rec. 709. The default Y'CbCr encoding is V4L2_YCBCR_ENC_SMPTE240M. The default Y'CbCr quantization is limited range. The chromaticities of the primary colors and the @@ -1159,8 +1153,8 @@ following V4L2_YCBCR_ENC_SMPTE240M encoding: clamped to the range [-0.5…0.5]. The Y'CbCr quantization is limited range.
-
- Colorspace NTSC 1953 (<constant>V4L2_COLORSPACE_470_SYSTEM_M</constant>) +
+ Colorspace NTSC 1953 (<constant>V4L2_COLORSPACE_470_SYSTEM_M</constant>) This standard defines the colorspace used by NTSC in 1953. In practice this colorspace is obsolete and SMPTE 170M should be used instead. The default Y'CbCr encoding is V4L2_YCBCR_ENC_601. The default Y'CbCr quantization is limited range. @@ -1237,8 +1231,8 @@ clamped to the range [-0.5…0.5]. The Y'CbCr quantization is limited range This transform is identical to one defined in SMPTE 170M/BT.601.
-
- Colorspace EBU Tech. 3213 (<constant>V4L2_COLORSPACE_470_SYSTEM_BG</constant>) +
+ Colorspace EBU Tech. 3213 (<constant>V4L2_COLORSPACE_470_SYSTEM_BG</constant>) The standard defines the colorspace used by PAL/SECAM in 1975. In practice this colorspace is obsolete and SMPTE 170M should be used instead. The default Y'CbCr encoding is V4L2_YCBCR_ENC_601. The default Y'CbCr quantization is limited range. @@ -1311,8 +1305,8 @@ clamped to the range [-0.5…0.5]. The Y'CbCr quantization is limited range This transform is identical to one defined in SMPTE 170M/BT.601.
-
- Colorspace JPEG (<constant>V4L2_COLORSPACE_JPEG</constant>) +
+ Colorspace JPEG (<constant>V4L2_COLORSPACE_JPEG</constant>) This colorspace defines the colorspace used by most (Motion-)JPEG formats. The chromaticities of the primary colors and the white reference are identical to sRGB. The Y'CbCr encoding is V4L2_YCBCR_ENC_601 with full range quantization where diff --git a/Documentation/DocBook/media/v4l/subdev-formats.xml b/Documentation/DocBook/media/v4l/subdev-formats.xml index c5ea868e390958d499681d1b63570c11c9933721..2588ad781242e2d3f655fa1fcc2d35fe09257293 100644 --- a/Documentation/DocBook/media/v4l/subdev-formats.xml +++ b/Documentation/DocBook/media/v4l/subdev-formats.xml @@ -91,7 +91,9 @@ see . For formats where the total number of bits per pixel is smaller than the number of bus samples per pixel times the bus width, a padding value stating if the bytes are padded in their most high order bits - (PADHI) or low order bits (PADLO). + (PADHI) or low order bits (PADLO). A "C" prefix is used for component-wise + padding in the most high order bits (CPADHI) or low order bits (CPADLO) + of each separate component. For formats where the number of bus samples per pixel is larger than 1, an endianness value stating if the pixel is transferred MSB first (BE) or LSB first (LE). @@ -192,6 +194,24 @@ see .
+ + MEDIA_BUS_FMT_RGB444_1X12 + 0x1016 + + &dash-ent-20; + r3 + r2 + r1 + r0 + g3 + g2 + g1 + g0 + b3 + b2 + b1 + b0 + MEDIA_BUS_FMT_RGB444_2X8_PADHI_BE 0x1001 @@ -304,6 +324,28 @@ see . g4 g3 + + MEDIA_BUS_FMT_RGB565_1X16 + 0x1017 + + &dash-ent-16; + r4 + r3 + r2 + r1 + r0 + g5 + g4 + g3 + g2 + g1 + g0 + b4 + b3 + b2 + b1 + b0 + MEDIA_BUS_FMT_BGR565_2X8_BE 0x1005 @@ -440,6 +482,126 @@ see . b1 b0 + + MEDIA_BUS_FMT_RBG888_1X24 + 0x100e + + &dash-ent-8; + r7 + r6 + r5 + r4 + r3 + r2 + r1 + r0 + b7 + b6 + b5 + b4 + b3 + b2 + b1 + b0 + g7 + g6 + g5 + g4 + g3 + g2 + g1 + g0 + + + MEDIA_BUS_FMT_RGB666_1X24_CPADHI + 0x1015 + + &dash-ent-8; + 0 + 0 + r5 + r4 + r3 + r2 + r1 + r0 + 0 + 0 + g5 + g4 + g3 + g2 + g1 + g0 + 0 + 0 + b5 + b4 + b3 + b2 + b1 + b0 + + + MEDIA_BUS_FMT_BGR888_1X24 + 0x1013 + + &dash-ent-8; + b7 + b6 + b5 + b4 + b3 + b2 + b1 + b0 + g7 + g6 + g5 + g4 + g3 + g2 + g1 + g0 + r7 + r6 + r5 + r4 + r3 + r2 + r1 + r0 + + + MEDIA_BUS_FMT_GBR888_1X24 + 0x1014 + + &dash-ent-8; + g7 + g6 + g5 + g4 + g3 + g2 + g1 + g0 + b7 + b6 + b5 + b4 + b3 + b2 + b1 + b0 + r7 + r6 + r5 + r4 + r3 + r2 + r1 + r0 + MEDIA_BUS_FMT_RGB888_1X24 0x100a @@ -579,99 +741,81 @@ see . b1 b0 + + MEDIA_BUS_FMT_RGB888_1X32_PADHI + 0x100f + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + r7 + r6 + r5 + r4 + r3 + r2 + r1 + r0 + g7 + g6 + g5 + g4 + g3 + g2 + g1 + g0 + b7 + b6 + b5 + b4 + b3 + b2 + b1 + b0 +
- - -
- Bayer Formats - - Those formats transfer pixel data as red, green and blue components. - The format code is made of the following information. - - The red, green and blue components order code, as encoded in a - pixel sample. The possible values are shown in . - The number of bits per pixel component. All components are - transferred on the same number of bits. Common values are 8, 10 and 12. - - The compression (optional). If the pixel components are - ALAW- or DPCM-compressed, a mention of the compression scheme and the - number of bits per compressed pixel component. - The number of bus samples per pixel. Pixels that are wider than - the bus width must be transferred in multiple samples. Common values are - 1 and 2. - The bus width. - For formats where the total number of bits per pixel is smaller - than the number of bus samples per pixel times the bus width, a padding - value stating if the bytes are padded in their most high order bits - (PADHI) or low order bits (PADLO). - For formats where the number of bus samples per pixel is larger - than 1, an endianness value stating if the pixel is transferred MSB first - (BE) or LSB first (LE). - - - For instance, a format with uncompressed 10-bit Bayer components - arranged in a red, green, green, blue pattern transferred as 2 8-bit - samples per pixel with the least significant bits transferred first will - be named MEDIA_BUS_FMT_SRGGB10_2X8_PADHI_LE. + On LVDS buses, usually each sample is transferred serialized in + seven time slots per pixel clock, on three (18-bit) or four (24-bit) + differential data pairs at the same time. The remaining bits are used for + control signals as defined by SPWG/PSWG/VESA or JEIDA standards. + The 24-bit RGB format serialized in seven time slots on four lanes using + JEIDA defined bit mapping will be named + MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, for example. -
- Bayer Patterns - - - - - - Bayer filter color patterns - - -
- - The following table lists existing packed Bayer formats. The data - organization is given as an example for the first pixel only. - - - Bayer Formats - +
+ LVDS RGB formats + - - - - - - - - - - - - - - - + + + + + + + + Identifier Code - Data organization + + Data organization - Bit - 11 - 10 - 9 - 8 - 7 - 6 - 5 - 4 + Timeslot + Lane 3 2 1 @@ -679,7 +823,317 @@ see . - + + MEDIA_BUS_FMT_RGB666_1X7X3_SPWG + 0x1010 + 0 + + - + d + b1 + g0 + + + + + 1 + + - + d + b0 + r5 + + + + + 2 + + - + d + g5 + r4 + + + + + 3 + + - + b5 + g4 + r3 + + + + + 4 + + - + b4 + g3 + r2 + + + + + 5 + + - + b3 + g2 + r1 + + + + + 6 + + - + b2 + g1 + r0 + + + MEDIA_BUS_FMT_RGB888_1X7X4_SPWG + 0x1011 + 0 + + d + d + b1 + g0 + + + + + 1 + + b7 + d + b0 + r5 + + + + + 2 + + b6 + d + g5 + r4 + + + + + 3 + + g7 + b5 + g4 + r3 + + + + + 4 + + g6 + b4 + g3 + r2 + + + + + 5 + + r7 + b3 + g2 + r1 + + + + + 6 + + r6 + b2 + g1 + r0 + + + MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA + 0x1012 + 0 + + d + d + b3 + g2 + + + + + 1 + + b1 + d + b2 + r7 + + + + + 2 + + b0 + d + g7 + r6 + + + + + 3 + + g1 + b7 + g6 + r5 + + + + + 4 + + g0 + b6 + g5 + r4 + + + + + 5 + + r1 + b5 + g4 + r3 + + + + + 6 + + r0 + b4 + g3 + r2 + + + +
+
+ +
+ Bayer Formats + + Those formats transfer pixel data as red, green and blue components. + The format code is made of the following information. + + The red, green and blue components order code, as encoded in a + pixel sample. The possible values are shown in . + The number of bits per pixel component. All components are + transferred on the same number of bits. Common values are 8, 10 and 12. + + The compression (optional). If the pixel components are + ALAW- or DPCM-compressed, a mention of the compression scheme and the + number of bits per compressed pixel component. + The number of bus samples per pixel. Pixels that are wider than + the bus width must be transferred in multiple samples. Common values are + 1 and 2. + The bus width. + For formats where the total number of bits per pixel is smaller + than the number of bus samples per pixel times the bus width, a padding + value stating if the bytes are padded in their most high order bits + (PADHI) or low order bits (PADLO). + For formats where the number of bus samples per pixel is larger + than 1, an endianness value stating if the pixel is transferred MSB first + (BE) or LSB first (LE). + + + + For instance, a format with uncompressed 10-bit Bayer components + arranged in a red, green, green, blue pattern transferred as 2 8-bit + samples per pixel with the least significant bits transferred first will + be named MEDIA_BUS_FMT_SRGGB10_2X8_PADHI_LE. + + +
+ Bayer Patterns + + + + + + Bayer filter color patterns + + +
+ + The following table lists existing packed Bayer formats. The data + organization is given as an example for the first pixel only. + + + Bayer Formats + + + + + + + + + + + + + + + + + + + + Identifier + Code + + Data organization + + + + + Bit + 11 + 10 + 9 + 8 + 7 + 6 + 5 + 4 + 3 + 2 + 1 + 0 + + + + MEDIA_BUS_FMT_SBGGR8_1X8 0x3001 @@ -2188,11 +2642,15 @@ see . y1 y0 - - MEDIA_BUS_FMT_UYVY8_1X16 - 0x200f + + MEDIA_BUS_FMT_UYVY12_2X12 + 0x201c - &dash-ent-16; + &dash-ent-20; + u11 + u10 + u9 + u8 u7 u6 u5 @@ -2201,28 +2659,16 @@ see . u2 u1 u0 - y7 - y6 - y5 - y4 - y3 - y2 - y1 - y0 - &dash-ent-16; - v7 - v6 - v5 - v4 - v3 - v2 - v1 - v0 + &dash-ent-20; + y11 + y10 + y9 + y8 y7 y6 y5 @@ -2232,11 +2678,15 @@ see . y1 y0 - - MEDIA_BUS_FMT_VYUY8_1X16 - 0x2010 + - &dash-ent-16; + + + &dash-ent-20; + v11 + v10 + v9 + v8 v7 v6 v5 @@ -2245,28 +2695,16 @@ see . v2 v1 v0 - y7 - y6 - y5 - y4 - y3 - y2 - y1 - y0 - &dash-ent-16; - u7 - u6 - u5 - u4 - u3 - u2 - u1 - u0 + &dash-ent-20; + y11 + y10 + y9 + y8 y7 y6 y5 @@ -2276,41 +2714,15 @@ see . y1 y0 - - MEDIA_BUS_FMT_YUYV8_1X16 - 0x2011 - - &dash-ent-16; - y7 - y6 - y5 - y4 - y3 - y2 - y1 - y0 - u7 - u6 - u5 - u4 - u3 - u2 - u1 - u0 - - - - + + MEDIA_BUS_FMT_VYUY12_2X12 + 0x201d - &dash-ent-16; - y7 - y6 - y5 - y4 - y3 - y2 - y1 - y0 + &dash-ent-20; + v11 + v10 + v9 + v8 v7 v6 v5 @@ -2320,11 +2732,15 @@ see . v1 v0 - - MEDIA_BUS_FMT_YVYU8_1X16 - 0x2012 + - &dash-ent-16; + + + &dash-ent-20; + y11 + y10 + y9 + y8 y7 y6 y5 @@ -2333,28 +2749,16 @@ see . y2 y1 y0 - v7 - v6 - v5 - v4 - v3 - v2 - v1 - v0 - &dash-ent-16; - y7 - y6 - y5 - y4 - y3 - y2 - y1 - y0 + &dash-ent-20; + u11 + u10 + u9 + u8 u7 u6 u5 @@ -2364,11 +2768,15 @@ see . u1 u0 - - MEDIA_BUS_FMT_YDYUYDYV8_1X16 - 0x2014 + - &dash-ent-16; + + + &dash-ent-20; + y11 + y10 + y9 + y8 y7 y6 y5 @@ -2377,20 +2785,16 @@ see . y2 y1 y0 - d - d - d - d - d - d - d - d - - - + + MEDIA_BUS_FMT_YUYV12_2X12 + 0x201e - &dash-ent-16; + &dash-ent-20; + y11 + y10 + y9 + y8 y7 y6 y5 @@ -2399,6 +2803,16 @@ see . y2 y1 y0 + + + + + + &dash-ent-20; + u11 + u10 + u9 + u8 u7 u6 u5 @@ -2412,7 +2826,11 @@ see . - &dash-ent-16; + &dash-ent-20; + y11 + y10 + y9 + y8 y7 y6 y5 @@ -2421,20 +2839,34 @@ see . y2 y1 y0 - d - d - d - d - d - d - d - d - &dash-ent-16; + &dash-ent-20; + v11 + v10 + v9 + v8 + v7 + v6 + v5 + v4 + v3 + v2 + v1 + v0 + + + MEDIA_BUS_FMT_YVYU12_2X12 + 0x201f + + &dash-ent-20; + y11 + y10 + y9 + y8 y7 y6 y5 @@ -2443,6 +2875,16 @@ see . y2 y1 y0 + + + + + + &dash-ent-20; + v11 + v10 + v9 + v8 v7 v6 v5 @@ -2452,11 +2894,31 @@ see . v1 v0 - - MEDIA_BUS_FMT_UYVY10_1X20 - 0x201a + - &dash-ent-12; + + + &dash-ent-20; + y11 + y10 + y9 + y8 + y7 + y6 + y5 + y4 + y3 + y2 + y1 + y0 + + + + + + &dash-ent-20; + u11 + u10 u9 u8 u7 @@ -2467,8 +2929,20 @@ see . u2 u1 u0 - y9 - y8 + + + MEDIA_BUS_FMT_UYVY8_1X16 + 0x200f + + &dash-ent-16; + u7 + u6 + u5 + u4 + u3 + u2 + u1 + u0 y7 y6 y5 @@ -2482,9 +2956,7 @@ see . - &dash-ent-12; - v9 - v8 + &dash-ent-16; v7 v6 v5 @@ -2493,8 +2965,6 @@ see . v2 v1 v0 - y9 - y8 y7 y6 y5 @@ -2504,13 +2974,11 @@ see . y1 y0 - - MEDIA_BUS_FMT_VYUY10_1X20 - 0x201b + + MEDIA_BUS_FMT_VYUY8_1X16 + 0x2010 - &dash-ent-12; - v9 - v8 + &dash-ent-16; v7 v6 v5 @@ -2519,8 +2987,6 @@ see . v2 v1 v0 - y9 - y8 y7 y6 y5 @@ -2534,9 +3000,7 @@ see . - &dash-ent-12; - u9 - u8 + &dash-ent-16; u7 u6 u5 @@ -2545,8 +3009,6 @@ see . u2 u1 u0 - y9 - y8 y7 y6 y5 @@ -2556,13 +3018,11 @@ see . y1 y0 - - MEDIA_BUS_FMT_YUYV10_1X20 - 0x200d + + MEDIA_BUS_FMT_YUYV8_1X16 + 0x2011 - &dash-ent-12; - y9 - y8 + &dash-ent-16; y7 y6 y5 @@ -2571,8 +3031,6 @@ see . y2 y1 y0 - u9 - u8 u7 u6 u5 @@ -2586,9 +3044,7 @@ see . - &dash-ent-12; - y9 - y8 + &dash-ent-16; y7 y6 y5 @@ -2597,8 +3053,6 @@ see . y2 y1 y0 - v9 - v8 v7 v6 v5 @@ -2608,13 +3062,11 @@ see . v1 v0 - - MEDIA_BUS_FMT_YVYU10_1X20 - 0x200e + + MEDIA_BUS_FMT_YVYU8_1X16 + 0x2012 - &dash-ent-12; - y9 - y8 + &dash-ent-16; y7 y6 y5 @@ -2623,8 +3075,6 @@ see . y2 y1 y0 - v9 - v8 v7 v6 v5 @@ -2638,9 +3088,7 @@ see . - &dash-ent-12; - y9 - y8 + &dash-ent-16; y7 y6 y5 @@ -2649,8 +3097,6 @@ see . y2 y1 y0 - u9 - u8 u7 u6 u5 @@ -2660,14 +3106,11 @@ see . u1 u0 - - MEDIA_BUS_FMT_YUV10_1X30 - 0x2016 + + MEDIA_BUS_FMT_YDYUYDYV8_1X16 + 0x2014 - - - - - y9 - y8 + &dash-ent-16; y7 y6 y5 @@ -2676,39 +3119,20 @@ see . y2 y1 y0 - u9 - u8 - u7 - u6 - u5 - u4 - u3 - u2 - u1 - u0 - v9 - v8 - v7 - v6 - v5 - v4 - v3 - v2 - v1 - v0 + d + d + d + d + d + d + d + d - - MEDIA_BUS_FMT_AYUV8_1X32 - 0x2017 + - a7 - a6 - a5 - a4 - a3 - a2 - a1 - a0 + + + &dash-ent-16; y7 y6 y5 @@ -2725,6 +3149,42 @@ see . u2 u1 u0 + + + + + + &dash-ent-16; + y7 + y6 + y5 + y4 + y3 + y2 + y1 + y0 + d + d + d + d + d + d + d + d + + + + + + &dash-ent-16; + y7 + y6 + y5 + y4 + y3 + y2 + y1 + y0 v7 v6 v5 @@ -2734,13 +3194,11 @@ see . v1 v0 - - MEDIA_BUS_FMT_UYVY12_2X12 - 0x201c + + MEDIA_BUS_FMT_UYVY10_1X20 + 0x201a - &dash-ent-20; - u11 - u10 + &dash-ent-12; u9 u8 u7 @@ -2751,14 +3209,6 @@ see . u2 u1 u0 - - - - - - &dash-ent-20; - y11 - y10 y9 y8 y7 @@ -2774,9 +3224,7 @@ see . - &dash-ent-20; - v11 - v10 + &dash-ent-12; v9 v8 v7 @@ -2787,14 +3235,6 @@ see . v2 v1 v0 - - - - - - &dash-ent-20; - y11 - y10 y9 y8 y7 @@ -2806,13 +3246,11 @@ see . y1 y0 - - MEDIA_BUS_FMT_VYUY12_2X12 - 0x201d + + MEDIA_BUS_FMT_VYUY10_1X20 + 0x201b - &dash-ent-20; - v11 - v10 + &dash-ent-12; v9 v8 v7 @@ -2823,14 +3261,6 @@ see . v2 v1 v0 - - - - - - &dash-ent-20; - y11 - y10 y9 y8 y7 @@ -2846,9 +3276,7 @@ see . - &dash-ent-20; - u11 - u10 + &dash-ent-12; u9 u8 u7 @@ -2859,14 +3287,6 @@ see . u2 u1 u0 - - - - - - &dash-ent-20; - y11 - y10 y9 y8 y7 @@ -2878,13 +3298,11 @@ see . y1 y0 - - MEDIA_BUS_FMT_YUYV12_2X12 - 0x201e + + MEDIA_BUS_FMT_YUYV10_1X20 + 0x200d - &dash-ent-20; - y11 - y10 + &dash-ent-12; y9 y8 y7 @@ -2895,14 +3313,6 @@ see . y2 y1 y0 - - - - - - &dash-ent-20; - u11 - u10 u9 u8 u7 @@ -2918,9 +3328,7 @@ see . - &dash-ent-20; - y11 - y10 + &dash-ent-12; y9 y8 y7 @@ -2931,14 +3339,6 @@ see . y2 y1 y0 - - - - - - &dash-ent-20; - v11 - v10 v9 v8 v7 @@ -2950,13 +3350,11 @@ see . v1 v0 - - MEDIA_BUS_FMT_YVYU12_2X12 - 0x201f + + MEDIA_BUS_FMT_YVYU10_1X20 + 0x200e - &dash-ent-20; - y11 - y10 + &dash-ent-12; y9 y8 y7 @@ -2967,14 +3365,6 @@ see . y2 y1 y0 - - - - - - &dash-ent-20; - v11 - v10 v9 v8 v7 @@ -2990,9 +3380,7 @@ see . - &dash-ent-20; - y11 - y10 + &dash-ent-12; y9 y8 y7 @@ -3003,16 +3391,67 @@ see . y2 y1 y0 + u9 + u8 + u7 + u6 + u5 + u4 + u3 + u2 + u1 + u0 - - + + MEDIA_BUS_FMT_VUY8_1X24 + 0x201a + &dash-ent-8; + v7 + v6 + v5 + v4 + v3 + v2 + v1 + v0 + u7 + u6 + u5 + u4 + u3 + u2 + u1 + u0 + y7 + y6 + y5 + y4 + y3 + y2 + y1 + y0 + + + MEDIA_BUS_FMT_YUV8_1X24 + 0x2025 - &dash-ent-20; - u11 - u10 - u9 - u8 + - + - + - + - + - + - + - + - + y7 + y6 + y5 + y4 + y3 + y2 + y1 + y0 u7 u6 u5 @@ -3021,6 +3460,14 @@ see . u2 u1 u0 + v7 + v6 + v5 + v4 + v3 + v2 + v1 + v0 MEDIA_BUS_FMT_UYVY12_1X24 @@ -3262,6 +3709,80 @@ see . u1 u0 + + MEDIA_BUS_FMT_YUV10_1X30 + 0x2016 + + - + - + y9 + y8 + y7 + y6 + y5 + y4 + y3 + y2 + y1 + y0 + u9 + u8 + u7 + u6 + u5 + u4 + u3 + u2 + u1 + u0 + v9 + v8 + v7 + v6 + v5 + v4 + v3 + v2 + v1 + v0 + + + MEDIA_BUS_FMT_AYUV8_1X32 + 0x2017 + + a7 + a6 + a5 + a4 + a3 + a2 + a1 + a0 + y7 + y6 + y5 + y4 + y3 + y2 + y1 + y0 + u7 + u6 + u5 + u4 + u3 + u2 + u1 + u0 + v7 + v6 + v5 + v4 + v3 + v2 + v1 + v0 +
diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index ac0f8d9d2a4976a59f6c02b44de1b6859e768134..e98caa1c39bd21ed89ca24e47a85f1733bf38be9 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -136,6 +136,7 @@ Remote Controller chapter. 2012 2013 2014 + 2015 Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab, Pawel Osciak @@ -151,6 +152,14 @@ structs, ioctls) must be noted in more detail in the history chapter (compat.xml), along with the possible impact on existing drivers and applications. --> + + 3.21 + 2015-02-13 + mcc + Fix documentation for media controller device nodes and add support for DVB device nodes. +Add support for Tuner sub-device. + + 3.19 2014-12-05 diff --git a/Documentation/DocBook/media/v4l/vidioc-cropcap.xml b/Documentation/DocBook/media/v4l/vidioc-cropcap.xml index 1f5ed64cd75a0e5c2aeb3cc0ea4c7ff670aceeea..50cb940cbe5ca97eb915e2044eb7ab2a7780a4f9 100644 --- a/Documentation/DocBook/media/v4l/vidioc-cropcap.xml +++ b/Documentation/DocBook/media/v4l/vidioc-cropcap.xml @@ -59,6 +59,11 @@ constant except when switching the video standard. Remember this switch can occur implicit when switching the video input or output. +Do not use the multiplanar buffer types. Use V4L2_BUF_TYPE_VIDEO_CAPTURE +instead of V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE +and use V4L2_BUF_TYPE_VIDEO_OUTPUT instead of +V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE. + This ioctl must be implemented for video capture or output devices that support cropping and/or scaling and/or have non-square pixels, and for overlay devices. @@ -73,9 +78,7 @@ support cropping and/or scaling and/or have non-square pixels, and for overlay d Type of the data stream, set by the application. Only these types are valid here: V4L2_BUF_TYPE_VIDEO_CAPTURE, -V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE, -V4L2_BUF_TYPE_VIDEO_OUTPUT, -V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE and +V4L2_BUF_TYPE_VIDEO_OUTPUT and V4L2_BUF_TYPE_VIDEO_OVERLAY. See . diff --git a/Documentation/DocBook/media/v4l/vidioc-dqevent.xml b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml index b036f8963353a2a2f88c336855da9282e7d68fb6..50ccd33948c1cbee6fb8bbd28864681780c1b833 100644 --- a/Documentation/DocBook/media/v4l/vidioc-dqevent.xml +++ b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml @@ -64,7 +64,7 @@ __u32 type - Type of the event. + Type of the event, see . union @@ -154,6 +154,113 @@ + + Event Types + + &cs-def; + + + V4L2_EVENT_ALL + 0 + All events. V4L2_EVENT_ALL is valid only for + VIDIOC_UNSUBSCRIBE_EVENT for unsubscribing all events at once. + + + + V4L2_EVENT_VSYNC + 1 + This event is triggered on the vertical sync. + This event has a &v4l2-event-vsync; associated with it. + + + + V4L2_EVENT_EOS + 2 + This event is triggered when the end of a stream is reached. + This is typically used with MPEG decoders to report to the application + when the last of the MPEG stream has been decoded. + + + + V4L2_EVENT_CTRL + 3 + This event requires that the id + matches the control ID from which you want to receive events. + This event is triggered if the control's value changes, if a + button control is pressed or if the control's flags change. + This event has a &v4l2-event-ctrl; associated with it. This struct + contains much of the same information as &v4l2-queryctrl; and + &v4l2-control;. + + If the event is generated due to a call to &VIDIOC-S-CTRL; or + &VIDIOC-S-EXT-CTRLS;, then the event will not be sent to + the file handle that called the ioctl function. This prevents + nasty feedback loops. If you do want to get the + event, then set the V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK + flag. + + + This event type will ensure that no information is lost when + more events are raised than there is room internally. In that + case the &v4l2-event-ctrl; of the second-oldest event is kept, + but the changes field of the + second-oldest event is ORed with the changes + field of the oldest event. + + + + V4L2_EVENT_FRAME_SYNC + 4 + + Triggered immediately when the reception of a + frame has begun. This event has a + &v4l2-event-frame-sync; associated with it. + + If the hardware needs to be stopped in the case of a + buffer underrun it might not be able to generate this event. + In such cases the frame_sequence + field in &v4l2-event-frame-sync; will not be incremented. This + causes two consecutive frame sequence numbers to have n times + frame interval in between them. + + + + V4L2_EVENT_SOURCE_CHANGE + 5 + + This event is triggered when a source parameter change is + detected during runtime by the video device. It can be a + runtime resolution change triggered by a video decoder or the + format change happening on an input connector. + This event requires that the id + matches the input index (when used with a video device node) + or the pad index (when used with a subdevice node) from which + you want to receive events. + + This event has a &v4l2-event-src-change; associated + with it. The changes bitfield denotes + what has changed for the subscribed pad. If multiple events + occurred before application could dequeue them, then the changes + will have the ORed value of all the events generated. + + + + V4L2_EVENT_MOTION_DET + 6 + + Triggered whenever the motion detection state for one or more of the regions + changes. This event has a &v4l2-event-motion-det; associated with it. + + + + V4L2_EVENT_PRIVATE_START + 0x08000000 + Base event number for driver-private events. + + + +
+ struct <structname>v4l2_event_vsync</structname> @@ -177,7 +284,7 @@ __u32 changes - A bitmask that tells what has changed. See . + A bitmask that tells what has changed. See . __u32 @@ -309,8 +416,8 @@
- - Changes +
+ Control Changes &cs-def; @@ -318,9 +425,9 @@ V4L2_EVENT_CTRL_CH_VALUE0x0001This control event was triggered because the value of the control - changed. Special case: if a button control is pressed, then this - event is sent as well, even though there is not explicit value - associated with a button control. + changed. Special cases: Volatile controls do no generate this event; + If a control has the V4L2_CTRL_FLAG_EXECUTE_ON_WRITE + flag set, then this event is sent as well, regardless its value. V4L2_EVENT_CTRL_CH_FLAGS diff --git a/Documentation/DocBook/media/v4l/vidioc-g-crop.xml b/Documentation/DocBook/media/v4l/vidioc-g-crop.xml index 75c6a93de3c173246aff4763da48cfdc4b3ce81f..e6c4efb9e8b412517b7b71f2566d0ada66550bf2 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-crop.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-crop.xml @@ -70,6 +70,11 @@ structure or returns the &EINVAL; if cropping is not supported. VIDIOC_S_CROP ioctl with a pointer to this structure. +Do not use the multiplanar buffer types. Use V4L2_BUF_TYPE_VIDEO_CAPTURE +instead of V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE +and use V4L2_BUF_TYPE_VIDEO_OUTPUT instead of +V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE. + The driver first adjusts the requested dimensions against hardware limits, &ie; the bounds given by the capture/output window, and it rounds to the closest possible values of horizontal and diff --git a/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml b/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml index c4336577ff066a34ba7149ffde35e5e93ed2ef2c..764b635ed4cf7102e04eb3ae0de2a24f0a7f1238 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml @@ -318,10 +318,20 @@ can't generate such frequencies, then the flag will also be cleared. V4L2_DV_FL_HALF_LINE - Specific to interlaced formats: if set, then field 1 (aka the odd field) -is really one half-line longer and field 2 (aka the even field) is really one half-line -shorter, so each field has exactly the same number of half-lines. Whether half-lines can be -detected or used depends on the hardware. + Specific to interlaced formats: if set, then the vertical frontporch +of field 1 (aka the odd field) is really one half-line longer and the vertical backporch +of field 2 (aka the even field) is really one half-line shorter, so each field has exactly +the same number of half-lines. Whether half-lines can be detected or used depends on +the hardware. + + + + V4L2_DV_FL_IS_CE_VIDEO + If set, then this is a Consumer Electronics (CE) video format. +Such formats differ from other formats (commonly called IT formats) in that if +R'G'B' encoding is used then by default the R'G'B' values use limited range +(i.e. 16-235) as opposed to full range (i.e. 0-255). All formats defined in CEA-861 +except for the 640x480p59.94 format are CE formats. diff --git a/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml index 20460730b02ca242e0ba5d096761ac00ea8239af..77607cc196889b6fc14e412d72fc229fdf3210d0 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml @@ -240,9 +240,9 @@ where padding bytes after the last line of an image cross a system page boundary. Capture devices may write padding bytes, the value is undefined. Output devices ignore the contents of padding bytes.When the image format is planar the -bytesperline value applies to the largest +bytesperline value applies to the first plane and is divided by the same factor as the -width field for any smaller planes. For +width field for the other planes. For example the Cb and Cr planes of a YUV 4:2:0 image have half as many padding bytes following each line as the Y plane. To avoid ambiguities drivers must return a bytesperline value diff --git a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml index 9c04ac8661b10eed113e74fb57d7a14b2fb792b1..0bb5c060db27847a7a93e2f22ae51743fe413d11 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml @@ -60,8 +60,8 @@ To query the cropping (composing) rectangle set &v4l2-selection; type field to the respective buffer type. -Do not use multiplanar buffers. Use V4L2_BUF_TYPE_VIDEO_CAPTURE -instead of V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE. Use +Do not use the multiplanar buffer types. Use V4L2_BUF_TYPE_VIDEO_CAPTURE +instead of V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE and use V4L2_BUF_TYPE_VIDEO_OUTPUT instead of V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE. The next step is setting the value of &v4l2-selection; target field diff --git a/Documentation/DocBook/media/v4l/vidioc-g-sliced-vbi-cap.xml b/Documentation/DocBook/media/v4l/vidioc-g-sliced-vbi-cap.xml index bd015d1563ffe45b8137eabeb9e463db2078cdcd..d05623c554037c6471b1acf38f3d32d4a55c289e 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-sliced-vbi-cap.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-sliced-vbi-cap.xml @@ -205,7 +205,7 @@ ETS 300 231, lsb first transmitted. V4L2_SLICED_CAPTION_525 0x1000 - + NTSC line 21, 284 (second field 21) Two bytes in transmission order, including parity bit, lsb first transmitted. diff --git a/Documentation/DocBook/media/v4l/vidioc-querycap.xml b/Documentation/DocBook/media/v4l/vidioc-querycap.xml index d0c5e604f014f3080966510d39cf7877e018d2be..20fda75a012dc130e8a94b1935d5efe574a5dae3 100644 --- a/Documentation/DocBook/media/v4l/vidioc-querycap.xml +++ b/Documentation/DocBook/media/v4l/vidioc-querycap.xml @@ -102,10 +102,10 @@ The bus_info must start with "PCI:" for PCI boards, "PCIe:" for PCI Express boar __u32 version Version number of the driver. -Starting on kernel 3.1, the version reported is provided per -V4L2 subsystem, following the same Kernel numberation scheme. However, it -should not always return the same version as the kernel, if, for example, -an stable or distribution-modified kernel uses the V4L2 stack from a +Starting with kernel 3.1, the version reported is provided by the +V4L2 subsystem following the kernel numbering scheme. However, it +may not always return the same version as the kernel if, for example, +a stable or distribution-modified kernel uses the V4L2 stack from a newer kernel. The version number is formatted using the KERNEL_VERSION() macro: diff --git a/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml b/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml index 2bd98fd7a4e51ac542d423ab74e335b8de0a9e7a..dc83ad70f8dc8ff30c1b31c4cb833df169de80b2 100644 --- a/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml +++ b/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml @@ -600,7 +600,9 @@ writing a value will cause the device to carry out a given action changes continuously. A typical example would be the current gain value if the device is in auto-gain mode. In such a case the hardware calculates the gain value based on the lighting conditions which can change over time. Note that setting a new value for -a volatile control will have no effect. The new value will just be ignored. +a volatile control will have no effect and no V4L2_EVENT_CTRL_CH_VALUE +will be sent, unless the V4L2_CTRL_FLAG_EXECUTE_ON_WRITE flag +(see below) is also set. Otherwise the new value will just be ignored. V4L2_CTRL_FLAG_HAS_PAYLOAD @@ -610,6 +612,14 @@ using one of the pointer fields of &v4l2-ext-control;. This flag is set for cont that are an array, string, or have a compound type. In all cases you have to set a pointer to memory containing the payload of the control. + + V4L2_CTRL_FLAG_EXECUTE_ON_WRITE + 0x0200 + The value provided to the control will be propagated to the driver +even if remains constant. This is required when the control represents an action +on the hardware. For example: clearing an error flag or triggering the flash. All the +controls of the type V4L2_CTRL_TYPE_BUTTON have this flag set. +
diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-enum-frame-interval.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-enum-frame-interval.xml index 2f8f4f0a023596c5b75d0ec22e8ce3d1be9ae350..cff59f5cbf044ce1c2545be614afb4fd74b25762 100644 --- a/Documentation/DocBook/media/v4l/vidioc-subdev-enum-frame-interval.xml +++ b/Documentation/DocBook/media/v4l/vidioc-subdev-enum-frame-interval.xml @@ -67,9 +67,9 @@ To enumerate frame intervals applications initialize the index, pad, - code, width and - height fields of - &v4l2-subdev-frame-interval-enum; and call the + which, code, + width and height + fields of &v4l2-subdev-frame-interval-enum; and call the VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL ioctl with a pointer to this structure. Drivers fill the rest of the structure or return an &EINVAL; if one of the input fields is invalid. All frame intervals are @@ -123,7 +123,12 @@ __u32 - reserved[9] + which + Frame intervals to be enumerated, from &v4l2-subdev-format-whence;. + + + __u32 + reserved[8] Reserved for future extensions. Applications and drivers must set the array to zero. diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-enum-frame-size.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-enum-frame-size.xml index 79ce42b7c60cf87b363fa5bc02ad1281358b83d8..abd545ede67ae1dd357af54b45b896c59163d3c8 100644 --- a/Documentation/DocBook/media/v4l/vidioc-subdev-enum-frame-size.xml +++ b/Documentation/DocBook/media/v4l/vidioc-subdev-enum-frame-size.xml @@ -61,9 +61,9 @@ ioctl. To enumerate frame sizes applications initialize the - pad, code and - index fields of the - &v4l2-subdev-mbus-code-enum; and call the + pad, which , + code and index + fields of the &v4l2-subdev-mbus-code-enum; and call the VIDIOC_SUBDEV_ENUM_FRAME_SIZE ioctl with a pointer to the structure. Drivers fill the minimum and maximum frame sizes or return an &EINVAL; if one of the input parameters is invalid. @@ -127,7 +127,12 @@ __u32 - reserved[9] + which + Frame sizes to be enumerated, from &v4l2-subdev-format-whence;. + + + __u32 + reserved[8] Reserved for future extensions. Applications and drivers must set the array to zero. diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-enum-mbus-code.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-enum-mbus-code.xml index a6b3432449f64a8cab4fe9b5c5c84a7b8aa0412a..0bcb278fd062604f66a902b8a41c6ba166fd205c 100644 --- a/Documentation/DocBook/media/v4l/vidioc-subdev-enum-mbus-code.xml +++ b/Documentation/DocBook/media/v4l/vidioc-subdev-enum-mbus-code.xml @@ -56,8 +56,8 @@ To enumerate media bus formats available at a given sub-device pad - applications initialize the pad and - index fields of &v4l2-subdev-mbus-code-enum; and + applications initialize the pad, which + and index fields of &v4l2-subdev-mbus-code-enum; and call the VIDIOC_SUBDEV_ENUM_MBUS_CODE ioctl with a pointer to this structure. Drivers fill the rest of the structure or return an &EINVAL; if either the pad or @@ -93,7 +93,12 @@ __u32 - reserved[9] + which + Media bus format codes to be enumerated, from &v4l2-subdev-format-whence;. + + + __u32 + reserved[8] Reserved for future extensions. Applications and drivers must set the array to zero. diff --git a/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml b/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml index d7c9365ecdbe245e05aee3875ee09ab5b8fa0199..d0332f6109296e1eccd530ee6e85da157b3855e3 100644 --- a/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml +++ b/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml @@ -60,7 +60,9 @@ __u32 type - Type of the event. + Type of the event, see . Note that +V4L2_EVENT_ALL can be used with VIDIOC_UNSUBSCRIBE_EVENT +for unsubscribing all events at once. __u32 @@ -84,113 +86,6 @@ - - Event Types - - &cs-def; - - - V4L2_EVENT_ALL - 0 - All events. V4L2_EVENT_ALL is valid only for - VIDIOC_UNSUBSCRIBE_EVENT for unsubscribing all events at once. - - - - V4L2_EVENT_VSYNC - 1 - This event is triggered on the vertical sync. - This event has a &v4l2-event-vsync; associated with it. - - - - V4L2_EVENT_EOS - 2 - This event is triggered when the end of a stream is reached. - This is typically used with MPEG decoders to report to the application - when the last of the MPEG stream has been decoded. - - - - V4L2_EVENT_CTRL - 3 - This event requires that the id - matches the control ID from which you want to receive events. - This event is triggered if the control's value changes, if a - button control is pressed or if the control's flags change. - This event has a &v4l2-event-ctrl; associated with it. This struct - contains much of the same information as &v4l2-queryctrl; and - &v4l2-control;. - - If the event is generated due to a call to &VIDIOC-S-CTRL; or - &VIDIOC-S-EXT-CTRLS;, then the event will not be sent to - the file handle that called the ioctl function. This prevents - nasty feedback loops. If you do want to get the - event, then set the V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK - flag. - - - This event type will ensure that no information is lost when - more events are raised than there is room internally. In that - case the &v4l2-event-ctrl; of the second-oldest event is kept, - but the changes field of the - second-oldest event is ORed with the changes - field of the oldest event. - - - - V4L2_EVENT_FRAME_SYNC - 4 - - Triggered immediately when the reception of a - frame has begun. This event has a - &v4l2-event-frame-sync; associated with it. - - If the hardware needs to be stopped in the case of a - buffer underrun it might not be able to generate this event. - In such cases the frame_sequence - field in &v4l2-event-frame-sync; will not be incremented. This - causes two consecutive frame sequence numbers to have n times - frame interval in between them. - - - - V4L2_EVENT_SOURCE_CHANGE - 5 - - This event is triggered when a source parameter change is - detected during runtime by the video device. It can be a - runtime resolution change triggered by a video decoder or the - format change happening on an input connector. - This event requires that the id - matches the input index (when used with a video device node) - or the pad index (when used with a subdevice node) from which - you want to receive events. - - This event has a &v4l2-event-src-change; associated - with it. The changes bitfield denotes - what has changed for the subscribed pad. If multiple events - occurred before application could dequeue them, then the changes - will have the ORed value of all the events generated. - - - - V4L2_EVENT_MOTION_DET - 6 - - Triggered whenever the motion detection state for one or more of the regions - changes. This event has a &v4l2-event-motion-det; associated with it. - - - - V4L2_EVENT_PRIVATE_START - 0x08000000 - Base event number for driver-private events. - - - -
- Event Flags diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt index 653d5d739d7ff5b55dbcd8d606b5d7e1da51a99f..31d1d658827f082f66c88c3147e99be3321635cf 100644 --- a/Documentation/IPMI.txt +++ b/Documentation/IPMI.txt @@ -505,7 +505,10 @@ at module load time (for a module) with: The addresses are normal I2C addresses. The adapter is the string name of the adapter, as shown in /sys/class/i2c-adapter/i2c-/name. -It is *NOT* i2c- itself. +It is *NOT* i2c- itself. Also, the comparison is done ignoring +spaces, so if the name is "This is an I2C chip" you can say +adapter_name=ThisisanI2cchip. This is because it's hard to pass in +spaces in kernel parameters. The debug flags are bit flags for each BMC found, they are: IPMI messages: 1, driver state: 2, timing: 4, I2C probe: 8 diff --git a/Documentation/IRQ-domain.txt b/Documentation/IRQ-domain.txt index 39cfa72732ff9f354655fc1ed3012ca3cf37c95d..3a8e15cba816a4ea16fb0208518046214ebff1e6 100644 --- a/Documentation/IRQ-domain.txt +++ b/Documentation/IRQ-domain.txt @@ -95,8 +95,7 @@ since it doesn't need to allocate a table as large as the largest hwirq number. The disadvantage is that hwirq to IRQ number lookup is dependent on how many entries are in the table. -Very few drivers should need this mapping. At the moment, powerpc -iseries is the only user. +Very few drivers should need this mapping. ==== No Map ===- irq_domain_add_nomap() diff --git a/Documentation/Makefile b/Documentation/Makefile index 6883a1b9b351d9942112a7c450d53f3152453a4a..bc0548201755e1a8d29614bccbd78fcbbe5a34ae 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -1,4 +1,4 @@ -subdir-y := accounting arm auxdisplay blackfin connector \ +subdir-y := accounting auxdisplay blackfin connector \ filesystems filesystems ia64 laptops mic misc-devices \ networking pcmcia prctl ptp spi timers vDSO video4linux \ watchdog diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt index 0d920d54536df88b07f5b46637cfa32b5970100e..1179850f453c66849c1808f83b0955a63cd33ad1 100644 --- a/Documentation/PCI/MSI-HOWTO.txt +++ b/Documentation/PCI/MSI-HOWTO.txt @@ -353,7 +353,7 @@ retry: rc = pci_enable_msix_range(adapter->pdev, adapter->msix_entries, maxvec, maxvec); /* - * -ENOSPC is the only error code allowed to be analized + * -ENOSPC is the only error code allowed to be analyzed */ if (rc == -ENOSPC) { if (maxvec == 1) @@ -370,7 +370,7 @@ retry: return rc; } -Note how pci_enable_msix_range() return value is analized for a fallback - +Note how pci_enable_msix_range() return value is analyzed for a fallback - any error code other than -ENOSPC indicates a fatal error and should not be retried. @@ -486,7 +486,7 @@ during development. If your device supports both MSI-X and MSI capabilities, you should use the MSI-X facilities in preference to the MSI facilities. As mentioned above, MSI-X supports any number of interrupts between 1 and 2048. -In constrast, MSI is restricted to a maximum of 32 interrupts (and +In contrast, MSI is restricted to a maximum of 32 interrupts (and must be a power of two). In addition, the MSI interrupt vectors must be allocated consecutively, so the system might not be able to allocate as many vectors for MSI as it could for MSI-X. On some platforms, MSI @@ -501,18 +501,9 @@ necessary to disable interrupts (Linux guarantees the same interrupt will not be re-entered). If a device uses multiple interrupts, the driver must disable interrupts while the lock is held. If the device sends a different interrupt, the driver will deadlock trying to recursively -acquire the spinlock. - -There are two solutions. The first is to take the lock with -spin_lock_irqsave() or spin_lock_irq() (see -Documentation/DocBook/kernel-locking). The second is to specify -IRQF_DISABLED to request_irq() so that the kernel runs the entire -interrupt routine with interrupts disabled. - -If your MSI interrupt routine does not hold the lock for the whole time -it is running, the first solution may be best. The second solution is -normally preferred as it avoids making two transitions from interrupt -disabled to enabled and back again. +acquire the spinlock. Such deadlocks can be avoided by using +spin_lock_irqsave() or spin_lock_irq() which disable local interrupts +and acquire the lock (see Documentation/DocBook/kernel-locking). 4.6 How to tell whether MSI/MSI-X is enabled on a device diff --git a/Documentation/PCI/pci-error-recovery.txt b/Documentation/PCI/pci-error-recovery.txt index 898ded24510de978c287116e03094e4a052d48da..ac26869c7db450dc2861fb0b617ef8045610c3b2 100644 --- a/Documentation/PCI/pci-error-recovery.txt +++ b/Documentation/PCI/pci-error-recovery.txt @@ -256,7 +256,7 @@ STEP 4: Slot Reset ------------------ In response to a return value of PCI_ERS_RESULT_NEED_RESET, the -the platform will peform a slot reset on the requesting PCI device(s). +the platform will perform a slot reset on the requesting PCI device(s). The actual steps taken by a platform to perform a slot reset will be platform-dependent. Upon completion of slot reset, the platform will call the device slot_reset() callback. diff --git a/Documentation/PCI/pcieaer-howto.txt b/Documentation/PCI/pcieaer-howto.txt index 26d3d945c3c21aa965cd9b48c49cc42abf09df3f..b4987c0bcb20fd86e6fe8b989fab15d8b6fbed51 100644 --- a/Documentation/PCI/pcieaer-howto.txt +++ b/Documentation/PCI/pcieaer-howto.txt @@ -66,8 +66,8 @@ hardware (mostly chipsets) has root ports that cannot obtain the reporting source ID. nosourceid=n by default. 2.3 AER error output -When a PCI-E AER error is captured, an error message will be outputed to -console. If it's a correctable error, it is outputed as a warning. +When a PCI-E AER error is captured, an error message will be outputted to +console. If it's a correctable error, it is outputted as a warning. Otherwise, it is printed as an error. So users could choose different log level to filter out correctable error messages. diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 447671bd2927b4d0aff8c33a3a8352add2e68d82..b03a832a08e25c498dda1e0a1df980cbdc9b6c15 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -614,8 +614,8 @@ The canonical patch message body contains the following: - An empty line. - - The body of the explanation, which will be copied to the - permanent changelog to describe this patch. + - The body of the explanation, line wrapped at 75 columns, which will + be copied to the permanent changelog to describe this patch. - The "Signed-off-by:" lines, described above, which will also go in the changelog. diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt index 9b121a569ab4397841ac9611aad90502fefb16b7..15dfce708ebf6ec3263ac0d66ff2b6f3a57471d4 100644 --- a/Documentation/acpi/enumeration.txt +++ b/Documentation/acpi/enumeration.txt @@ -253,9 +253,14 @@ input driver: GPIO support ~~~~~~~~~~~~ ACPI 5 introduced two new resources to describe GPIO connections: GpioIo -and GpioInt. These resources are used be used to pass GPIO numbers used by -the device to the driver. For example: +and GpioInt. These resources can be used to pass GPIO numbers used by +the device to the driver. ACPI 5.1 extended this with _DSD (Device +Specific Data) which made it possible to name the GPIOs among other things. +For example: + +Device (DEV) +{ Method (_CRS, 0, NotSerialized) { Name (SBUF, ResourceTemplate() @@ -285,6 +290,18 @@ the device to the driver. For example: Return (SBUF) } + // ACPI 5.1 _DSD used for naming the GPIOs + Name (_DSD, Package () + { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () + { + Package () {"power-gpios", Package() {^DEV, 0, 0, 0 }}, + Package () {"irq-gpios", Package() {^DEV, 1, 0, 0 }}, + } + }) + ... + These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0" specifies the path to the controller. In order to use these GPIOs in Linux we need to translate them to the corresponding Linux GPIO descriptors. @@ -300,11 +317,11 @@ a code like this: struct gpio_desc *irq_desc, *power_desc; - irq_desc = gpiod_get_index(dev, NULL, 1); + irq_desc = gpiod_get(dev, "irq"); if (IS_ERR(irq_desc)) /* handle error */ - power_desc = gpiod_get_index(dev, NULL, 0); + power_desc = gpiod_get(dev, "power"); if (IS_ERR(power_desc)) /* handle error */ @@ -313,6 +330,9 @@ a code like this: There are also devm_* versions of these functions which release the descriptors once the device is released. +See Documentation/acpi/gpio-properties.txt for more information about the +_DSD binding related to GPIOs. + MFD devices ~~~~~~~~~~~ The MFD devices register their children as platform devices. For the child diff --git a/Documentation/acpi/gpio-properties.txt b/Documentation/acpi/gpio-properties.txt index ae36fcf86dc7213c8b1a72bb0e698f89e51c878f..f35dad11f0de78955a2e4661f8ef5c9d51eb27d9 100644 --- a/Documentation/acpi/gpio-properties.txt +++ b/Documentation/acpi/gpio-properties.txt @@ -1,9 +1,9 @@ _DSD Device Properties Related to GPIO -------------------------------------- -With the release of ACPI 5.1 and the _DSD configuration objecte names -can finally be given to GPIOs (and other things as well) returned by -_CRS. Previously, we were only able to use an integer index to find +With the release of ACPI 5.1, the _DSD configuration object finally +allows names to be given to GPIOs (and other things as well) returned +by _CRS. Previously, we were only able to use an integer index to find the corresponding GPIO, which is pretty error prone (it depends on the _CRS output ordering, for example). diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX index 8edb9007844e1b6c6f49655b4e71df4da845eff1..dea011c8d7c718a8ff7a37dea7d35a81d0f67271 100644 --- a/Documentation/arm/00-INDEX +++ b/Documentation/arm/00-INDEX @@ -10,8 +10,6 @@ IXP4xx - Intel IXP4xx Network processor. Makefile - Build sourcefiles as part of the Documentation-build for arm -msm/ - - MSM specific documentation Netwinder - Netwinder specific documentation Porting diff --git a/Documentation/arm/Booting b/Documentation/arm/Booting index 371814a36719f7979402f41c63ca3609fcdae6a9..83c1df2fc758ba4b92dd900785ed7f0920ad9619 100644 --- a/Documentation/arm/Booting +++ b/Documentation/arm/Booting @@ -58,13 +58,18 @@ serial format options as described in -------------------------- Existing boot loaders: OPTIONAL -New boot loaders: MANDATORY +New boot loaders: MANDATORY except for DT-only platforms The boot loader should detect the machine type its running on by some method. Whether this is a hard coded value or some algorithm that looks at the connected hardware is beyond the scope of this document. The boot loader must ultimately be able to provide a MACH_TYPE_xxx -value to the kernel. (see linux/arch/arm/tools/mach-types). +value to the kernel. (see linux/arch/arm/tools/mach-types). This +should be passed to the kernel in register r1. + +For DT-only platforms, the machine type will be determined by device +tree. set the machine type to all ones (~0). This is not strictly +necessary, but assures that it will not match any existing types. 4. Setup boot data ------------------ diff --git a/Documentation/arm/Makefile b/Documentation/arm/Makefile deleted file mode 100644 index 732c77050cff6737bfb7538dd832fa4957d257eb..0000000000000000000000000000000000000000 --- a/Documentation/arm/Makefile +++ /dev/null @@ -1 +0,0 @@ -subdir-y := SH-Mobile diff --git a/Documentation/arm/Marvell/README b/Documentation/arm/Marvell/README index 17453794fca5d518be980b1350784a9e3a11ecd2..18a775d101723be46320bbf475f04c066b4c3ea2 100644 --- a/Documentation/arm/Marvell/README +++ b/Documentation/arm/Marvell/README @@ -96,6 +96,11 @@ EBU Armada family 88F6820 88F6828 + Armada 390/398 Flavors: + 88F6920 + 88F6928 + Product infos: http://www.marvell.com/embedded-processors/armada-39x/ + Armada XP Flavors: MV78230 MV78260 diff --git a/Documentation/arm/README b/Documentation/arm/README index aea34095cdcfcc5c61a8fe7254cb2e8761992e90..9d1e5b2c92e62b7554492b27516611b4adedc2dd 100644 --- a/Documentation/arm/README +++ b/Documentation/arm/README @@ -185,13 +185,20 @@ Kernel entry (head.S) board devices are used, or the device is setup, and provides that machine specific "personality." - This fine-grained machine specific selection is controlled by the machine - type ID, which acts both as a run-time and a compile-time code selection - method. + For platforms that support device tree (DT), the machine selection is + controlled at runtime by passing the device tree blob to the kernel. At + compile-time, support for the machine type must be selected. This allows for + a single multiplatform kernel build to be used for several machine types. - You can register a new machine via the web site at: + For platforms that do not use device tree, this machine selection is + controlled by the machine type ID, which acts both as a run-time and a + compile-time code selection method. You can register a new machine via the + web site at: + Note: Please do not register a machine type for DT-only platforms. If your + platform is DT-only, you do not need a registered machine type. + --- Russell King (15/03/2004) diff --git a/Documentation/arm/SH-Mobile/Makefile b/Documentation/arm/SH-Mobile/Makefile deleted file mode 100644 index bca8a7ef6bbef153e89edfcc8d27eeb79c5f22be..0000000000000000000000000000000000000000 --- a/Documentation/arm/SH-Mobile/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# List of programs to build -hostprogs-y := vrl4 - -# Tell kbuild to always build the programs -always := $(hostprogs-y) - -HOSTCFLAGS_vrl4.o += -I$(objtree)/usr/include -I$(srctree)/tools/include diff --git a/Documentation/arm/SH-Mobile/vrl4.c b/Documentation/arm/SH-Mobile/vrl4.c deleted file mode 100644 index f4cd8ad4e720c9346799487b3829db5bb3294f16..0000000000000000000000000000000000000000 --- a/Documentation/arm/SH-Mobile/vrl4.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * vrl4 format generator - * - * Copyright (C) 2010 Simon Horman - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -/* - * usage: vrl4 < zImage > out - * dd if=out of=/dev/sdx bs=512 seek=1 # Write the image to sector 1 - * - * Reads a zImage from stdin and writes a vrl4 image to stdout. - * In practice this means writing a padded vrl4 header to stdout followed - * by the zImage. - * - * The padding places the zImage at ALIGN bytes into the output. - * The vrl4 uses ALIGN + START_BASE as the start_address. - * This is where the mask ROM will jump to after verifying the header. - * - * The header sets copy_size to min(sizeof(zImage), MAX_BOOT_PROG_LEN) + ALIGN. - * That is, the mask ROM will load the padded header (ALIGN bytes) - * And then MAX_BOOT_PROG_LEN bytes of the image, or the entire image, - * whichever is smaller. - * - * The zImage is not modified in any way. - */ - -#define _BSD_SOURCE -#include -#include -#include -#include -#include -#include - -struct hdr { - uint32_t magic1; - uint32_t reserved1; - uint32_t magic2; - uint32_t reserved2; - uint16_t copy_size; - uint16_t boot_options; - uint32_t reserved3; - uint32_t start_address; - uint32_t reserved4; - uint32_t reserved5; - char reserved6[308]; -}; - -#define DECLARE_HDR(h) \ - struct hdr (h) = { \ - .magic1 = htole32(0xea000000), \ - .reserved1 = htole32(0x56), \ - .magic2 = htole32(0xe59ff008), \ - .reserved3 = htole16(0x1) } - -/* Align to 512 bytes, the MMCIF sector size */ -#define ALIGN_BITS 9 -#define ALIGN (1 << ALIGN_BITS) - -#define START_BASE 0xe55b0000 - -/* - * With an alignment of 512 the header uses the first sector. - * There is a 128 sector (64kbyte) limit on the data loaded by the mask ROM. - * So there are 127 sectors left for the boot programme. But in practice - * Only a small portion of a zImage is needed, 16 sectors should be more - * than enough. - * - * Note that this sets how much of the zImage is copied by the mask ROM. - * The entire zImage is present after the header and is loaded - * by the code in the boot program (which is the first portion of the zImage). - */ -#define MAX_BOOT_PROG_LEN (16 * 512) - -#define ROUND_UP(x) ((x + ALIGN - 1) & ~(ALIGN - 1)) - -static ssize_t do_read(int fd, void *buf, size_t count) -{ - size_t offset = 0; - ssize_t l; - - while (offset < count) { - l = read(fd, buf + offset, count - offset); - if (!l) - break; - if (l < 0) { - if (errno == EAGAIN || errno == EWOULDBLOCK) - continue; - perror("read"); - return -1; - } - offset += l; - } - - return offset; -} - -static ssize_t do_write(int fd, const void *buf, size_t count) -{ - size_t offset = 0; - ssize_t l; - - while (offset < count) { - l = write(fd, buf + offset, count - offset); - if (l < 0) { - if (errno == EAGAIN || errno == EWOULDBLOCK) - continue; - perror("write"); - return -1; - } - offset += l; - } - - return offset; -} - -static ssize_t write_zero(int fd, size_t len) -{ - size_t i = len; - - while (i--) { - const char x = 0; - if (do_write(fd, &x, 1) < 0) - return -1; - } - - return len; -} - -int main(void) -{ - DECLARE_HDR(hdr); - char boot_program[MAX_BOOT_PROG_LEN]; - size_t aligned_hdr_len, alligned_prog_len; - ssize_t prog_len; - - prog_len = do_read(0, boot_program, sizeof(boot_program)); - if (prog_len <= 0) - return -1; - - aligned_hdr_len = ROUND_UP(sizeof(hdr)); - hdr.start_address = htole32(START_BASE + aligned_hdr_len); - alligned_prog_len = ROUND_UP(prog_len); - hdr.copy_size = htole16(aligned_hdr_len + alligned_prog_len); - - if (do_write(1, &hdr, sizeof(hdr)) < 0) - return -1; - if (write_zero(1, aligned_hdr_len - sizeof(hdr)) < 0) - return -1; - - if (do_write(1, boot_program, prog_len) < 0) - return 1; - - /* Write out the rest of the kernel */ - while (1) { - prog_len = do_read(0, boot_program, sizeof(boot_program)); - if (prog_len < 0) - return 1; - if (prog_len == 0) - break; - if (do_write(1, boot_program, prog_len) < 0) - return 1; - } - - return 0; -} diff --git a/Documentation/arm/SH-Mobile/zboot-rom-mmcif.txt b/Documentation/arm/SH-Mobile/zboot-rom-mmcif.txt deleted file mode 100644 index efff8ae2713dddf05420b2ca52f993f99ad20813..0000000000000000000000000000000000000000 --- a/Documentation/arm/SH-Mobile/zboot-rom-mmcif.txt +++ /dev/null @@ -1,29 +0,0 @@ -ROM-able zImage boot from MMC ------------------------------ - -An ROM-able zImage compiled with ZBOOT_ROM_MMCIF may be written to MMC and -SuperH Mobile ARM will to boot directly from the MMCIF hardware block. - -This is achieved by the mask ROM loading the first portion of the image into -MERAM and then jumping to it. This portion contains loader code which -copies the entire image to SDRAM and jumps to it. From there the zImage -boot code proceeds as normal, uncompressing the image into its final -location and then jumping to it. - -This code has been tested on an AP4EB board using the developer 1A eMMC -boot mode which is configured using the following jumper settings. -The board used for testing required a patched mask ROM in order for -this mode to function. - - 8 7 6 5 4 3 2 1 - x|x|x|x|x| |x| -S4 -+-+-+-+-+-+-+- - | | | | |x| |x on - -The zImage must be written to the MMC card at sector 1 (512 bytes) in -vrl4 format. A utility vrl4 is supplied to accomplish this. - -e.g. - vrl4 < zImage | dd of=/dev/sdX bs=512 seek=1 - -A dual-voltage MMC 4.0 card was used for testing. diff --git a/Documentation/arm/SH-Mobile/zboot-rom-sdhi.txt b/Documentation/arm/SH-Mobile/zboot-rom-sdhi.txt deleted file mode 100644 index 441959846e1abd11b3767741db70568d4d579c28..0000000000000000000000000000000000000000 --- a/Documentation/arm/SH-Mobile/zboot-rom-sdhi.txt +++ /dev/null @@ -1,42 +0,0 @@ -ROM-able zImage boot from eSD ------------------------------ - -An ROM-able zImage compiled with ZBOOT_ROM_SDHI may be written to eSD and -SuperH Mobile ARM will to boot directly from the SDHI hardware block. - -This is achieved by the mask ROM loading the first portion of the image into -MERAM and then jumping to it. This portion contains loader code which -copies the entire image to SDRAM and jumps to it. From there the zImage -boot code proceeds as normal, uncompressing the image into its final -location and then jumping to it. - -This code has been tested on an mackerel board using the developer 1A eSD -boot mode which is configured using the following jumper settings. - - 8 7 6 5 4 3 2 1 - x|x|x|x| |x|x| -S4 -+-+-+-+-+-+-+- - | | | |x| | |x on - -The eSD card needs to be present in SDHI slot 1 (CN7). -As such S1 and S33 also need to be configured as per -the notes in arch/arm/mach-shmobile/board-mackerel.c. - -A partial zImage must be written to physical partition #1 (boot) -of the eSD at sector 0 in vrl4 format. A utility vrl4 is supplied to -accomplish this. - -e.g. - vrl4 < zImage | dd of=/dev/sdX bs=512 count=17 - -A full copy of _the same_ zImage should be written to physical partition #1 -(boot) of the eSD at sector 0. This should _not_ be in vrl4 format. - - vrl4 < zImage | dd of=/dev/sdX bs=512 - -Note: The commands above assume that the physical partition has been -switched. No such facility currently exists in the Linux Kernel. - -Physical partitions are described in the eSD specification. At the time of -writing they are not the same as partitions that are typically configured -using fdisk and visible through /proc/partitions diff --git a/Documentation/arm/msm/gpiomux.txt b/Documentation/arm/msm/gpiomux.txt deleted file mode 100644 index 67a81620adf67d7830a5037d21a47ad48e2acdfc..0000000000000000000000000000000000000000 --- a/Documentation/arm/msm/gpiomux.txt +++ /dev/null @@ -1,176 +0,0 @@ -This document provides an overview of the msm_gpiomux interface, which -is used to provide gpio pin multiplexing and configuration on mach-msm -targets. - -History -======= - -The first-generation API for gpio configuration & multiplexing on msm -is the function gpio_tlmm_config(). This function has a few notable -shortcomings, which led to its deprecation and replacement by gpiomux: - -The 'disable' parameter: Setting the second parameter to -gpio_tlmm_config to GPIO_CFG_DISABLE tells the peripheral -processor in charge of the subsystem to perform a look-up into a -low-power table and apply the low-power/sleep setting for the pin. -As the msm family evolved this became problematic. Not all pins -have sleep settings, not all peripheral processors will accept requests -to apply said sleep settings, and not all msm targets have their gpio -subsystems managed by a peripheral processor. In order to get consistent -behavior on all targets, drivers are forced to ignore this parameter, -rendering it useless. - -The 'direction' flag: for all mux-settings other than raw-gpio (0), -the output-enable bit of a gpio is hard-wired to a known -input (usually VDD or ground). For those settings, the direction flag -is meaningless at best, and deceptive at worst. In addition, using the -direction flag to change output-enable (OE) directly can cause trouble in -gpiolib, which has no visibility into gpio direction changes made -in this way. Direction control in gpio mode should be made through gpiolib. - -Key Features of gpiomux -======================= - -- A consistent interface across all generations of msm. Drivers can expect -the same results on every target. -- gpiomux plays nicely with gpiolib. Functions that should belong to gpiolib -are left to gpiolib and not duplicated here. gpiomux is written with the -intent that gpio_chips will call gpiomux reference-counting methods -from their request() and free() hooks, providing full integration. -- Tabular configuration. Instead of having to call gpio_tlmm_config -hundreds of times, gpio configuration is placed in a single table. -- Per-gpio sleep. Each gpio is individually reference counted, allowing only -those lines which are in use to be put in high-power states. -- 0 means 'do nothing': all flags are designed so that the default memset-zero -equates to a sensible default of 'no configuration', preventing users -from having to provide hundreds of 'no-op' configs for unused or -unwanted lines. - -Usage -===== - -To use gpiomux, provide configuration information for relevant gpio lines -in the msm_gpiomux_configs table. Since a 0 equates to "unconfigured", -only those lines to be managed by gpiomux need to be specified. Here -is a completely fictional example: - -struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { - [12] = { - .active = GPIOMUX_VALID | GPIOMUX_DRV_8MA | GPIOMUX_FUNC_1, - .suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN, - }, - [34] = { - .suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN, - }, -}; - -To indicate that a gpio is in use, call msm_gpiomux_get() to increase -its reference count. To decrease the reference count, call msm_gpiomux_put(). - -The effect of this configuration is as follows: - -When the system boots, gpios 12 and 34 will be initialized with their -'suspended' configurations. All other gpios, which were left unconfigured, -will not be touched. - -When msm_gpiomux_get() is called on gpio 12 to raise its reference count -above 0, its active configuration will be applied. Since no other gpio -line has a valid active configuration, msm_gpiomux_get() will have no -effect on any other line. - -When msm_gpiomux_put() is called on gpio 12 or 34 to drop their reference -count to 0, their suspended configurations will be applied. -Since no other gpio line has a valid suspended configuration, no other -gpio line will be effected by msm_gpiomux_put(). Since gpio 34 has no valid -active configuration, this is effectively a no-op for gpio 34 as well, -with one small caveat, see the section "About Output-Enable Settings". - -All of the GPIOMUX_VALID flags may seem like unnecessary overhead, but -they address some important issues. As unused entries (all those -except 12 and 34) are zero-filled, gpiomux needs a way to distinguish -the used fields from the unused. In addition, the all-zero pattern -is a valid configuration! Therefore, gpiomux defines an additional bit -which is used to indicate when a field is used. This has the pleasant -side-effect of allowing calls to msm_gpiomux_write to use '0' to indicate -that a value should not be changed: - - msm_gpiomux_write(0, GPIOMUX_VALID, 0); - -replaces the active configuration of gpio 0 with an all-zero configuration, -but leaves the suspended configuration as it was. - -Static Configurations -===================== - -To install a static configuration, which is applied at boot and does -not change after that, install a configuration with a suspended component -but no active component, as in the previous example: - - [34] = { - .suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN, - }, - -The suspended setting is applied during boot, and the lack of any valid -active setting prevents any other setting from being applied at runtime. -If other subsystems attempting to access the line is a concern, one could -*really* anchor the configuration down by calling msm_gpiomux_get on the -line at initialization to move the line into active mode. With the line -held, it will never be re-suspended, and with no valid active configuration, -no new configurations will be applied. - -But then, if having other subsystems grabbing for the line is truly a concern, -it should be reserved with gpio_request instead, which carries an implicit -msm_gpiomux_get. - -gpiomux and gpiolib -=================== - -It is expected that msm gpio_chips will call msm_gpiomux_get() and -msm_gpiomux_put() from their request and free hooks, like this fictional -example: - -static int request(struct gpio_chip *chip, unsigned offset) -{ - return msm_gpiomux_get(chip->base + offset); -} - -static void free(struct gpio_chip *chip, unsigned offset) -{ - msm_gpiomux_put(chip->base + offset); -} - - ...somewhere in a gpio_chip declaration... - .request = request, - .free = free, - -This provides important functionality: -- It guarantees that a gpio line will have its 'active' config applied - when the line is requested, and will not be suspended while the line - remains requested; and -- It guarantees that gpio-direction settings from gpiolib behave sensibly. - See "About Output-Enable Settings." - -This mechanism allows for "auto-request" of gpiomux lines via gpiolib -when it is suitable. Drivers wishing more exact control are, of course, -free to also use msm_gpiomux_set and msm_gpiomux_get. - -About Output-Enable Settings -============================ - -Some msm targets do not have the ability to query the current gpio -configuration setting. This means that changes made to the output-enable -(OE) bit by gpiolib cannot be consistently detected and preserved by gpiomux. -Therefore, when gpiomux applies a configuration setting, any direction -settings which may have been applied by gpiolib are lost and the default -input settings are re-applied. - -For this reason, drivers should not assume that gpio direction settings -continue to hold if they free and then re-request a gpio. This seems like -common sense - after all, anybody could have obtained the line in the -meantime - but it needs saying. - -This also means that calls to msm_gpiomux_write will reset the OE bit, -which means that if the gpio line is held by a client of gpiolib and -msm_gpiomux_write is called, the direction setting has been lost and -gpiolib's internal state has been broken. -Release gpio lines before reconfiguring them. diff --git a/Documentation/arm64/acpi_object_usage.txt b/Documentation/arm64/acpi_object_usage.txt new file mode 100644 index 0000000000000000000000000000000000000000..a6e1a1805e514985b5cdfb7d46c39872378e8757 --- /dev/null +++ b/Documentation/arm64/acpi_object_usage.txt @@ -0,0 +1,593 @@ +ACPI Tables +----------- +The expectations of individual ACPI tables are discussed in the list that +follows. + +If a section number is used, it refers to a section number in the ACPI +specification where the object is defined. If "Signature Reserved" is used, +the table signature (the first four bytes of the table) is the only portion +of the table recognized by the specification, and the actual table is defined +outside of the UEFI Forum (see Section 5.2.6 of the specification). + +For ACPI on arm64, tables also fall into the following categories: + + -- Required: DSDT, FADT, GTDT, MADT, MCFG, RSDP, SPCR, XSDT + + -- Recommended: BERT, EINJ, ERST, HEST, SSDT + + -- Optional: BGRT, CPEP, CSRT, DRTM, ECDT, FACS, FPDT, MCHI, MPST, + MSCT, RASF, SBST, SLIT, SPMI, SRAT, TCPA, TPM2, UEFI + + -- Not supported: BOOT, DBG2, DBGP, DMAR, ETDT, HPET, IBFT, IVRS, + LPIT, MSDM, RSDT, SLIC, WAET, WDAT, WDRT, WPBT + + +Table Usage for ARMv8 Linux +----- ---------------------------------------------------------------- +BERT Section 18.3 (signature == "BERT") + == Boot Error Record Table == + Must be supplied if RAS support is provided by the platform. It + is recommended this table be supplied. + +BOOT Signature Reserved (signature == "BOOT") + == simple BOOT flag table == + Microsoft only table, will not be supported. + +BGRT Section 5.2.22 (signature == "BGRT") + == Boot Graphics Resource Table == + Optional, not currently supported, with no real use-case for an + ARM server. + +CPEP Section 5.2.18 (signature == "CPEP") + == Corrected Platform Error Polling table == + Optional, not currently supported, and not recommended until such + time as ARM-compatible hardware is available, and the specification + suitably modified. + +CSRT Signature Reserved (signature == "CSRT") + == Core System Resources Table == + Optional, not currently supported. + +DBG2 Signature Reserved (signature == "DBG2") + == DeBuG port table 2 == + Microsoft only table, will not be supported. + +DBGP Signature Reserved (signature == "DBGP") + == DeBuG Port table == + Microsoft only table, will not be supported. + +DSDT Section 5.2.11.1 (signature == "DSDT") + == Differentiated System Description Table == + A DSDT is required; see also SSDT. + + ACPI tables contain only one DSDT but can contain one or more SSDTs, + which are optional. Each SSDT can only add to the ACPI namespace, + but cannot modify or replace anything in the DSDT. + +DMAR Signature Reserved (signature == "DMAR") + == DMA Remapping table == + x86 only table, will not be supported. + +DRTM Signature Reserved (signature == "DRTM") + == Dynamic Root of Trust for Measurement table == + Optional, not currently supported. + +ECDT Section 5.2.16 (signature == "ECDT") + == Embedded Controller Description Table == + Optional, not currently supported, but could be used on ARM if and + only if one uses the GPE_BIT field to represent an IRQ number, since + there are no GPE blocks defined in hardware reduced mode. This would + need to be modified in the ACPI specification. + +EINJ Section 18.6 (signature == "EINJ") + == Error Injection table == + This table is very useful for testing platform response to error + conditions; it allows one to inject an error into the system as + if it had actually occurred. However, this table should not be + shipped with a production system; it should be dynamically loaded + and executed with the ACPICA tools only during testing. + +ERST Section 18.5 (signature == "ERST") + == Error Record Serialization Table == + On a platform supports RAS, this table must be supplied if it is not + UEFI-based; if it is UEFI-based, this table may be supplied. When this + table is not present, UEFI run time service will be utilized to save + and retrieve hardware error information to and from a persistent store. + +ETDT Signature Reserved (signature == "ETDT") + == Event Timer Description Table == + Obsolete table, will not be supported. + +FACS Section 5.2.10 (signature == "FACS") + == Firmware ACPI Control Structure == + It is unlikely that this table will be terribly useful. If it is + provided, the Global Lock will NOT be used since it is not part of + the hardware reduced profile, and only 64-bit address fields will + be considered valid. + +FADT Section 5.2.9 (signature == "FACP") + == Fixed ACPI Description Table == + Required for arm64. + + The HW_REDUCED_ACPI flag must be set. All of the fields that are + to be ignored when HW_REDUCED_ACPI is set are expected to be set to + zero. + + If an FACS table is provided, the X_FIRMWARE_CTRL field is to be + used, not FIRMWARE_CTRL. + + If PSCI is used (as is recommended), make sure that ARM_BOOT_ARCH is + filled in properly -- that the PSCI_COMPLIANT flag is set and that + PSCI_USE_HVC is set or unset as needed (see table 5-37). + + For the DSDT that is also required, the X_DSDT field is to be used, + not the DSDT field. + +FPDT Section 5.2.23 (signature == "FPDT") + == Firmware Performance Data Table == + Optional, not currently supported. + +GTDT Section 5.2.24 (signature == "GTDT") + == Generic Timer Description Table == + Required for arm64. + +HEST Section 18.3.2 (signature == "HEST") + == Hardware Error Source Table == + Until further error source types are defined, use only types 6 (AER + Root Port), 7 (AER Endpoint), 8 (AER Bridge), or 9 (Generic Hardware + Error Source). Firmware first error handling is possible if and only + if Trusted Firmware is being used on arm64. + + Must be supplied if RAS support is provided by the platform. It + is recommended this table be supplied. + +HPET Signature Reserved (signature == "HPET") + == High Precision Event timer Table == + x86 only table, will not be supported. + +IBFT Signature Reserved (signature == "IBFT") + == iSCSI Boot Firmware Table == + Microsoft defined table, support TBD. + +IVRS Signature Reserved (signature == "IVRS") + == I/O Virtualization Reporting Structure == + x86_64 (AMD) only table, will not be supported. + +LPIT Signature Reserved (signature == "LPIT") + == Low Power Idle Table == + x86 only table as of ACPI 5.1; future versions have been adapted for + use with ARM and will be recommended in order to support ACPI power + management. + +MADT Section 5.2.12 (signature == "APIC") + == Multiple APIC Description Table == + Required for arm64. Only the GIC interrupt controller structures + should be used (types 0xA - 0xE). + +MCFG Signature Reserved (signature == "MCFG") + == Memory-mapped ConFiGuration space == + If the platform supports PCI/PCIe, an MCFG table is required. + +MCHI Signature Reserved (signature == "MCHI") + == Management Controller Host Interface table == + Optional, not currently supported. + +MPST Section 5.2.21 (signature == "MPST") + == Memory Power State Table == + Optional, not currently supported. + +MSDM Signature Reserved (signature == "MSDM") + == Microsoft Data Management table == + Microsoft only table, will not be supported. + +MSCT Section 5.2.19 (signature == "MSCT") + == Maximum System Characteristic Table == + Optional, not currently supported. + +RASF Section 5.2.20 (signature == "RASF") + == RAS Feature table == + Optional, not currently supported. + +RSDP Section 5.2.5 (signature == "RSD PTR") + == Root System Description PoinTeR == + Required for arm64. + +RSDT Section 5.2.7 (signature == "RSDT") + == Root System Description Table == + Since this table can only provide 32-bit addresses, it is deprecated + on arm64, and will not be used. + +SBST Section 5.2.14 (signature == "SBST") + == Smart Battery Subsystem Table == + Optional, not currently supported. + +SLIC Signature Reserved (signature == "SLIC") + == Software LIcensing table == + Microsoft only table, will not be supported. + +SLIT Section 5.2.17 (signature == "SLIT") + == System Locality distance Information Table == + Optional in general, but required for NUMA systems. + +SPCR Signature Reserved (signature == "SPCR") + == Serial Port Console Redirection table == + Required for arm64. + +SPMI Signature Reserved (signature == "SPMI") + == Server Platform Management Interface table == + Optional, not currently supported. + +SRAT Section 5.2.16 (signature == "SRAT") + == System Resource Affinity Table == + Optional, but if used, only the GICC Affinity structures are read. + To support NUMA, this table is required. + +SSDT Section 5.2.11.2 (signature == "SSDT") + == Secondary System Description Table == + These tables are a continuation of the DSDT; these are recommended + for use with devices that can be added to a running system, but can + also serve the purpose of dividing up device descriptions into more + manageable pieces. + + An SSDT can only ADD to the ACPI namespace. It cannot modify or + replace existing device descriptions already in the namespace. + + These tables are optional, however. ACPI tables should contain only + one DSDT but can contain many SSDTs. + +TCPA Signature Reserved (signature == "TCPA") + == Trusted Computing Platform Alliance table == + Optional, not currently supported, and may need changes to fully + interoperate with arm64. + +TPM2 Signature Reserved (signature == "TPM2") + == Trusted Platform Module 2 table == + Optional, not currently supported, and may need changes to fully + interoperate with arm64. + +UEFI Signature Reserved (signature == "UEFI") + == UEFI ACPI data table == + Optional, not currently supported. No known use case for arm64, + at present. + +WAET Signature Reserved (signature == "WAET") + == Windows ACPI Emulated devices Table == + Microsoft only table, will not be supported. + +WDAT Signature Reserved (signature == "WDAT") + == Watch Dog Action Table == + Microsoft only table, will not be supported. + +WDRT Signature Reserved (signature == "WDRT") + == Watch Dog Resource Table == + Microsoft only table, will not be supported. + +WPBT Signature Reserved (signature == "WPBT") + == Windows Platform Binary Table == + Microsoft only table, will not be supported. + +XSDT Section 5.2.8 (signature == "XSDT") + == eXtended System Description Table == + Required for arm64. + + +ACPI Objects +------------ +The expectations on individual ACPI objects are discussed in the list that +follows: + +Name Section Usage for ARMv8 Linux +---- ------------ ------------------------------------------------- +_ADR 6.1.1 Use as needed. + +_BBN 6.5.5 Use as needed; PCI-specific. + +_BDN 6.5.3 Optional; not likely to be used on arm64. + +_CCA 6.2.17 This method should be defined for all bus masters + on arm64. While cache coherency is assumed, making + it explicit ensures the kernel will set up DMA as + it should. + +_CDM 6.2.1 Optional, to be used only for processor devices. + +_CID 6.1.2 Use as needed. + +_CLS 6.1.3 Use as needed. + +_CRS 6.2.2 Required on arm64. + +_DCK 6.5.2 Optional; not likely to be used on arm64. + +_DDN 6.1.4 This field can be used for a device name. However, + it is meant for DOS device names (e.g., COM1), so be + careful of its use across OSes. + +_DEP 6.5.8 Use as needed. + +_DIS 6.2.3 Optional, for power management use. + +_DLM 5.7.5 Optional. + +_DMA 6.2.4 Optional. + +_DSD 6.2.5 To be used with caution. If this object is used, try + to use it within the constraints already defined by the + Device Properties UUID. Only in rare circumstances + should it be necessary to create a new _DSD UUID. + + In either case, submit the _DSD definition along with + any driver patches for discussion, especially when + device properties are used. A driver will not be + considered complete without a corresponding _DSD + description. Once approved by kernel maintainers, + the UUID or device properties must then be registered + with the UEFI Forum; this may cause some iteration as + more than one OS will be registering entries. + +_DSM Do not use this method. It is not standardized, the + return values are not well documented, and it is + currently a frequent source of error. + +_DSW 7.2.1 Use as needed; power management specific. + +_EDL 6.3.1 Optional. + +_EJD 6.3.2 Optional. + +_EJx 6.3.3 Optional. + +_FIX 6.2.7 x86 specific, not used on arm64. + +\_GL 5.7.1 This object is not to be used in hardware reduced + mode, and therefore should not be used on arm64. + +_GLK 6.5.7 This object requires a global lock be defined; there + is no global lock on arm64 since it runs in hardware + reduced mode. Hence, do not use this object on arm64. + +\_GPE 5.3.1 This namespace is for x86 use only. Do not use it + on arm64. + +_GSB 6.2.7 Optional. + +_HID 6.1.5 Use as needed. This is the primary object to use in + device probing, though _CID and _CLS may also be used. + +_HPP 6.2.8 Optional, PCI specific. + +_HPX 6.2.9 Optional, PCI specific. + +_HRV 6.1.6 Optional, use as needed to clarify device behavior; in + some cases, this may be easier to use than _DSD. + +_INI 6.5.1 Not required, but can be useful in setting up devices + when UEFI leaves them in a state that may not be what + the driver expects before it starts probing. + +_IRC 7.2.15 Use as needed; power management specific. + +_LCK 6.3.4 Optional. + +_MAT 6.2.10 Optional; see also the MADT. + +_MLS 6.1.7 Optional, but highly recommended for use in + internationalization. + +_OFF 7.1.2 It is recommended to define this method for any device + that can be turned on or off. + +_ON 7.1.3 It is recommended to define this method for any device + that can be turned on or off. + +\_OS 5.7.3 This method will return "Linux" by default (this is + the value of the macro ACPI_OS_NAME on Linux). The + command line parameter acpi_os= can be used + to set it to some other value. + +_OSC 6.2.11 This method can be a global method in ACPI (i.e., + \_SB._OSC), or it may be associated with a specific + device (e.g., \_SB.DEV0._OSC), or both. When used + as a global method, only capabilities published in + the ACPI specification are allowed. When used as + a device-specific method, the process described for + using _DSD MUST be used to create an _OSC definition; + out-of-process use of _OSC is not allowed. That is, + submit the device-specific _OSC usage description as + part of the kernel driver submission, get it approved + by the kernel community, then register it with the + UEFI Forum. + +\_OSI 5.7.2 Deprecated on ARM64. Any invocation of this method + will print a warning on the console and return false. + That is, as far as ACPI firmware is concerned, _OSI + cannot be used to determine what sort of system is + being used or what functionality is provided. The + _OSC method is to be used instead. + +_OST 6.3.5 Optional. + +_PDC 8.4.1 Deprecated, do not use on arm64. + +\_PIC 5.8.1 The method should not be used. On arm64, the only + interrupt model available is GIC. + +_PLD 6.1.8 Optional. + +\_PR 5.3.1 This namespace is for x86 use only on legacy systems. + Do not use it on arm64. + +_PRS 6.2.12 Optional. + +_PRT 6.2.13 Required as part of the definition of all PCI root + devices. + +_PRW 7.2.13 Use as needed; power management specific. + +_PRx 7.2.8-11 Use as needed; power management specific. If _PR0 is + defined, _PR3 must also be defined. + +_PSC 7.2.6 Use as needed; power management specific. + +_PSE 7.2.7 Use as needed; power management specific. + +_PSW 7.2.14 Use as needed; power management specific. + +_PSx 7.2.2-5 Use as needed; power management specific. If _PS0 is + defined, _PS3 must also be defined. If clocks or + regulators need adjusting to be consistent with power + usage, change them in these methods. + +\_PTS 7.3.1 Use as needed; power management specific. + +_PXM 6.2.14 Optional. + +_REG 6.5.4 Use as needed. + +\_REV 5.7.4 Always returns the latest version of ACPI supported. + +_RMV 6.3.6 Optional. + +\_SB 5.3.1 Required on arm64; all devices must be defined in this + namespace. + +_SEG 6.5.6 Use as needed; PCI-specific. + +\_SI 5.3.1, Optional. + 9.1 + +_SLI 6.2.15 Optional; recommended when SLIT table is in use. + +_STA 6.3.7, It is recommended to define this method for any device + 7.1.4 that can be turned on or off. + +_SRS 6.2.16 Optional; see also _PRS. + +_STR 6.1.10 Recommended for conveying device names to end users; + this is preferred over using _DDN. + +_SUB 6.1.9 Use as needed; _HID or _CID are preferred. + +_SUN 6.1.11 Optional. + +\_Sx 7.3.2 Use as needed; power management specific. + +_SxD 7.2.16-19 Use as needed; power management specific. + +_SxW 7.2.20-24 Use as needed; power management specific. + +_SWS 7.3.3 Use as needed; power management specific; this may + require specification changes for use on arm64. + +\_TTS 7.3.4 Use as needed; power management specific. + +\_TZ 5.3.1 Optional. + +_UID 6.1.12 Recommended for distinguishing devices of the same + class; define it if at all possible. + +\_WAK 7.3.5 Use as needed; power management specific. + + +ACPI Event Model +---------------- +Do not use GPE block devices; these are not supported in the hardware reduced +profile used by arm64. Since there are no GPE blocks defined for use on ARM +platforms, GPIO-signaled interrupts should be used for creating system events. + + +ACPI Processor Control +---------------------- +Section 8 of the ACPI specification is currently undergoing change that +should be completed in the 6.0 version of the specification. Processor +performance control will be handled differently for arm64 at that point +in time. Processor aggregator devices (section 8.5) will not be used, +for example, but another similar mechanism instead. + +While UEFI constrains what we can say until the release of 6.0, it is +recommended that CPPC (8.4.5) be used as the primary model. This will +still be useful into the future. C-states and P-states will still be +provided, but most of the current design work appears to favor CPPC. + +Further, it is essential that the ARMv8 SoC provide a fully functional +implementation of PSCI; this will be the only mechanism supported by ACPI +to control CPU power state (including secondary CPU booting). + +More details will be provided on the release of the ACPI 6.0 specification. + + +ACPI System Address Map Interfaces +---------------------------------- +In Section 15 of the ACPI specification, several methods are mentioned as +possible mechanisms for conveying memory resource information to the kernel. +For arm64, we will only support UEFI for booting with ACPI, hence the UEFI +GetMemoryMap() boot service is the only mechanism that will be used. + + +ACPI Platform Error Interfaces (APEI) +------------------------------------- +The APEI tables supported are described above. + +APEI requires the equivalent of an SCI and an NMI on ARMv8. The SCI is used +to notify the OSPM of errors that have occurred but can be corrected and the +system can continue correct operation, even if possibly degraded. The NMI is +used to indicate fatal errors that cannot be corrected, and require immediate +attention. + +Since there is no direct equivalent of the x86 SCI or NMI, arm64 handles +these slightly differently. The SCI is handled as a normal GPIO-signaled +interrupt; given that these are corrected (or correctable) errors being +reported, this is sufficient. The NMI is emulated as the highest priority +GPIO-signaled interrupt possible. This implies some caution must be used +since there could be interrupts at higher privilege levels or even interrupts +at the same priority as the emulated NMI. In Linux, this should not be the +case but one should be aware it could happen. + + +ACPI Objects Not Supported on ARM64 +----------------------------------- +While this may change in the future, there are several classes of objects +that can be defined, but are not currently of general interest to ARM servers. + +These are not supported: + + -- Section 9.2: ambient light sensor devices + + -- Section 9.3: battery devices + + -- Section 9.4: lids (e.g., laptop lids) + + -- Section 9.8.2: IDE controllers + + -- Section 9.9: floppy controllers + + -- Section 9.10: GPE block devices + + -- Section 9.15: PC/AT RTC/CMOS devices + + -- Section 9.16: user presence detection devices + + -- Section 9.17: I/O APIC devices; all GICs must be enumerable via MADT + + -- Section 9.18: time and alarm devices (see 9.15) + + +ACPI Objects Not Yet Implemented +-------------------------------- +While these objects have x86 equivalents, and they do make some sense in ARM +servers, there is either no hardware available at present, or in some cases +there may not yet be a non-ARM implementation. Hence, they are currently not +implemented though that may change in the future. + +Not yet implemented are: + + -- Section 10: power source and power meter devices + + -- Section 11: thermal management + + -- Section 12: embedded controllers interface + + -- Section 13: SMBus interfaces + + -- Section 17: NUMA support (prototypes have been submitted for + review) diff --git a/Documentation/arm64/arm-acpi.txt b/Documentation/arm64/arm-acpi.txt new file mode 100644 index 0000000000000000000000000000000000000000..570a4f8e1a010ab7ec91f1ec9abb2aafc0a56e52 --- /dev/null +++ b/Documentation/arm64/arm-acpi.txt @@ -0,0 +1,505 @@ +ACPI on ARMv8 Servers +--------------------- +ACPI can be used for ARMv8 general purpose servers designed to follow +the ARM SBSA (Server Base System Architecture) [0] and SBBR (Server +Base Boot Requirements) [1] specifications. Please note that the SBBR +can be retrieved simply by visiting [1], but the SBSA is currently only +available to those with an ARM login due to ARM IP licensing concerns. + +The ARMv8 kernel implements the reduced hardware model of ACPI version +5.1 or later. Links to the specification and all external documents +it refers to are managed by the UEFI Forum. The specification is +available at http://www.uefi.org/specifications and documents referenced +by the specification can be found via http://www.uefi.org/acpi. + +If an ARMv8 system does not meet the requirements of the SBSA and SBBR, +or cannot be described using the mechanisms defined in the required ACPI +specifications, then ACPI may not be a good fit for the hardware. + +While the documents mentioned above set out the requirements for building +industry-standard ARMv8 servers, they also apply to more than one operating +system. The purpose of this document is to describe the interaction between +ACPI and Linux only, on an ARMv8 system -- that is, what Linux expects of +ACPI and what ACPI can expect of Linux. + + +Why ACPI on ARM? +---------------- +Before examining the details of the interface between ACPI and Linux, it is +useful to understand why ACPI is being used. Several technologies already +exist in Linux for describing non-enumerable hardware, after all. In this +section we summarize a blog post [2] from Grant Likely that outlines the +reasoning behind ACPI on ARMv8 servers. Actually, we snitch a good portion +of the summary text almost directly, to be honest. + +The short form of the rationale for ACPI on ARM is: + +-- ACPI’s bytecode (AML) allows the platform to encode hardware behavior, + while DT explicitly does not support this. For hardware vendors, being + able to encode behavior is a key tool used in supporting operating + system releases on new hardware. + +-- ACPI’s OSPM defines a power management model that constrains what the + platform is allowed to do into a specific model, while still providing + flexibility in hardware design. + +-- In the enterprise server environment, ACPI has established bindings (such + as for RAS) which are currently used in production systems. DT does not. + Such bindings could be defined in DT at some point, but doing so means ARM + and x86 would end up using completely different code paths in both firmware + and the kernel. + +-- Choosing a single interface to describe the abstraction between a platform + and an OS is important. Hardware vendors would not be required to implement + both DT and ACPI if they want to support multiple operating systems. And, + agreeing on a single interface instead of being fragmented into per OS + interfaces makes for better interoperability overall. + +-- The new ACPI governance process works well and Linux is now at the same + table as hardware vendors and other OS vendors. In fact, there is no + longer any reason to feel that ACPI is only belongs to Windows or that + Linux is in any way secondary to Microsoft in this arena. The move of + ACPI governance into the UEFI forum has significantly opened up the + specification development process, and currently, a large portion of the + changes being made to ACPI is being driven by Linux. + +Key to the use of ACPI is the support model. For servers in general, the +responsibility for hardware behaviour cannot solely be the domain of the +kernel, but rather must be split between the platform and the kernel, in +order to allow for orderly change over time. ACPI frees the OS from needing +to understand all the minute details of the hardware so that the OS doesn’t +need to be ported to each and every device individually. It allows the +hardware vendors to take responsibility for power management behaviour without +depending on an OS release cycle which is not under their control. + +ACPI is also important because hardware and OS vendors have already worked +out the mechanisms for supporting a general purpose computing ecosystem. The +infrastructure is in place, the bindings are in place, and the processes are +in place. DT does exactly what Linux needs it to when working with vertically +integrated devices, but there are no good processes for supporting what the +server vendors need. Linux could potentially get there with DT, but doing so +really just duplicates something that already works. ACPI already does what +the hardware vendors need, Microsoft won’t collaborate on DT, and hardware +vendors would still end up providing two completely separate firmware +interfaces -- one for Linux and one for Windows. + + +Kernel Compatibility +-------------------- +One of the primary motivations for ACPI is standardization, and using that +to provide backward compatibility for Linux kernels. In the server market, +software and hardware are often used for long periods. ACPI allows the +kernel and firmware to agree on a consistent abstraction that can be +maintained over time, even as hardware or software change. As long as the +abstraction is supported, systems can be updated without necessarily having +to replace the kernel. + +When a Linux driver or subsystem is first implemented using ACPI, it by +definition ends up requiring a specific version of the ACPI specification +-- it's baseline. ACPI firmware must continue to work, even though it may +not be optimal, with the earliest kernel version that first provides support +for that baseline version of ACPI. There may be a need for additional drivers, +but adding new functionality (e.g., CPU power management) should not break +older kernel versions. Further, ACPI firmware must also work with the most +recent version of the kernel. + + +Relationship with Device Tree +----------------------------- +ACPI support in drivers and subsystems for ARMv8 should never be mutually +exclusive with DT support at compile time. + +At boot time the kernel will only use one description method depending on +parameters passed from the bootloader (including kernel bootargs). + +Regardless of whether DT or ACPI is used, the kernel must always be capable +of booting with either scheme (in kernels with both schemes enabled at compile +time). + + +Booting using ACPI tables +------------------------- +The only defined method for passing ACPI tables to the kernel on ARMv8 +is via the UEFI system configuration table. Just so it is explicit, this +means that ACPI is only supported on platforms that boot via UEFI. + +When an ARMv8 system boots, it can either have DT information, ACPI tables, +or in some very unusual cases, both. If no command line parameters are used, +the kernel will try to use DT for device enumeration; if there is no DT +present, the kernel will try to use ACPI tables, but only if they are present. +In neither is available, the kernel will not boot. If acpi=force is used +on the command line, the kernel will attempt to use ACPI tables first, but +fall back to DT if there are no ACPI tables present. The basic idea is that +the kernel will not fail to boot unless it absolutely has no other choice. + +Processing of ACPI tables may be disabled by passing acpi=off on the kernel +command line; this is the default behavior. + +In order for the kernel to load and use ACPI tables, the UEFI implementation +MUST set the ACPI_20_TABLE_GUID to point to the RSDP table (the table with +the ACPI signature "RSD PTR "). If this pointer is incorrect and acpi=force +is used, the kernel will disable ACPI and try to use DT to boot instead; the +kernel has, in effect, determined that ACPI tables are not present at that +point. + +If the pointer to the RSDP table is correct, the table will be mapped into +the kernel by the ACPI core, using the address provided by UEFI. + +The ACPI core will then locate and map in all other ACPI tables provided by +using the addresses in the RSDP table to find the XSDT (eXtended System +Description Table). The XSDT in turn provides the addresses to all other +ACPI tables provided by the system firmware; the ACPI core will then traverse +this table and map in the tables listed. + +The ACPI core will ignore any provided RSDT (Root System Description Table). +RSDTs have been deprecated and are ignored on arm64 since they only allow +for 32-bit addresses. + +Further, the ACPI core will only use the 64-bit address fields in the FADT +(Fixed ACPI Description Table). Any 32-bit address fields in the FADT will +be ignored on arm64. + +Hardware reduced mode (see Section 4.1 of the ACPI 5.1 specification) will +be enforced by the ACPI core on arm64. Doing so allows the ACPI core to +run less complex code since it no longer has to provide support for legacy +hardware from other architectures. Any fields that are not to be used for +hardware reduced mode must be set to zero. + +For the ACPI core to operate properly, and in turn provide the information +the kernel needs to configure devices, it expects to find the following +tables (all section numbers refer to the ACPI 5.1 specfication): + + -- RSDP (Root System Description Pointer), section 5.2.5 + + -- XSDT (eXtended System Description Table), section 5.2.8 + + -- FADT (Fixed ACPI Description Table), section 5.2.9 + + -- DSDT (Differentiated System Description Table), section + 5.2.11.1 + + -- MADT (Multiple APIC Description Table), section 5.2.12 + + -- GTDT (Generic Timer Description Table), section 5.2.24 + + -- If PCI is supported, the MCFG (Memory mapped ConFiGuration + Table), section 5.2.6, specifically Table 5-31. + +If the above tables are not all present, the kernel may or may not be +able to boot properly since it may not be able to configure all of the +devices available. + + +ACPI Detection +-------------- +Drivers should determine their probe() type by checking for a null +value for ACPI_HANDLE, or checking .of_node, or other information in +the device structure. This is detailed further in the "Driver +Recommendations" section. + +In non-driver code, if the presence of ACPI needs to be detected at +runtime, then check the value of acpi_disabled. If CONFIG_ACPI is not +set, acpi_disabled will always be 1. + + +Device Enumeration +------------------ +Device descriptions in ACPI should use standard recognized ACPI interfaces. +These may contain less information than is typically provided via a Device +Tree description for the same device. This is also one of the reasons that +ACPI can be useful -- the driver takes into account that it may have less +detailed information about the device and uses sensible defaults instead. +If done properly in the driver, the hardware can change and improve over +time without the driver having to change at all. + +Clocks provide an excellent example. In DT, clocks need to be specified +and the drivers need to take them into account. In ACPI, the assumption +is that UEFI will leave the device in a reasonable default state, including +any clock settings. If for some reason the driver needs to change a clock +value, this can be done in an ACPI method; all the driver needs to do is +invoke the method and not concern itself with what the method needs to do +to change the clock. Changing the hardware can then take place over time +by changing what the ACPI method does, and not the driver. + +In DT, the parameters needed by the driver to set up clocks as in the example +above are known as "bindings"; in ACPI, these are known as "Device Properties" +and provided to a driver via the _DSD object. + +ACPI tables are described with a formal language called ASL, the ACPI +Source Language (section 19 of the specification). This means that there +are always multiple ways to describe the same thing -- including device +properties. For example, device properties could use an ASL construct +that looks like this: Name(KEY0, "value0"). An ACPI device driver would +then retrieve the value of the property by evaluating the KEY0 object. +However, using Name() this way has multiple problems: (1) ACPI limits +names ("KEY0") to four characters unlike DT; (2) there is no industry +wide registry that maintains a list of names, minimzing re-use; (3) +there is also no registry for the definition of property values ("value0"), +again making re-use difficult; and (4) how does one maintain backward +compatibility as new hardware comes out? The _DSD method was created +to solve precisely these sorts of problems; Linux drivers should ALWAYS +use the _DSD method for device properties and nothing else. + +The _DSM object (ACPI Section 9.14.1) could also be used for conveying +device properties to a driver. Linux drivers should only expect it to +be used if _DSD cannot represent the data required, and there is no way +to create a new UUID for the _DSD object. Note that there is even less +regulation of the use of _DSM than there is of _DSD. Drivers that depend +on the contents of _DSM objects will be more difficult to maintain over +time because of this; as of this writing, the use of _DSM is the cause +of quite a few firmware problems and is not recommended. + +Drivers should look for device properties in the _DSD object ONLY; the _DSD +object is described in the ACPI specification section 6.2.5, but this only +describes how to define the structure of an object returned via _DSD, and +how specific data structures are defined by specific UUIDs. Linux should +only use the _DSD Device Properties UUID [5]: + + -- UUID: daffd814-6eba-4d8c-8a91-bc9bbf4aa301 + + -- http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf + +The UEFI Forum provides a mechanism for registering device properties [4] +so that they may be used across all operating systems supporting ACPI. +Device properties that have not been registered with the UEFI Forum should +not be used. + +Before creating new device properties, check to be sure that they have not +been defined before and either registered in the Linux kernel documentation +as DT bindings, or the UEFI Forum as device properties. While we do not want +to simply move all DT bindings into ACPI device properties, we can learn from +what has been previously defined. + +If it is necessary to define a new device property, or if it makes sense to +synthesize the definition of a binding so it can be used in any firmware, +both DT bindings and ACPI device properties for device drivers have review +processes. Use them both. When the driver itself is submitted for review +to the Linux mailing lists, the device property definitions needed must be +submitted at the same time. A driver that supports ACPI and uses device +properties will not be considered complete without their definitions. Once +the device property has been accepted by the Linux community, it must be +registered with the UEFI Forum [4], which will review it again for consistency +within the registry. This may require iteration. The UEFI Forum, though, +will always be the canonical site for device property definitions. + +It may make sense to provide notice to the UEFI Forum that there is the +intent to register a previously unused device property name as a means of +reserving the name for later use. Other operating system vendors will +also be submitting registration requests and this may help smooth the +process. + +Once registration and review have been completed, the kernel provides an +interface for looking up device properties in a manner independent of +whether DT or ACPI is being used. This API should be used [6]; it can +eliminate some duplication of code paths in driver probing functions and +discourage divergence between DT bindings and ACPI device properties. + + +Programmable Power Control Resources +------------------------------------ +Programmable power control resources include such resources as voltage/current +providers (regulators) and clock sources. + +With ACPI, the kernel clock and regulator framework is not expected to be used +at all. + +The kernel assumes that power control of these resources is represented with +Power Resource Objects (ACPI section 7.1). The ACPI core will then handle +correctly enabling and disabling resources as they are needed. In order to +get that to work, ACPI assumes each device has defined D-states and that these +can be controlled through the optional ACPI methods _PS0, _PS1, _PS2, and _PS3; +in ACPI, _PS0 is the method to invoke to turn a device full on, and _PS3 is for +turning a device full off. + +There are two options for using those Power Resources. They can: + + -- be managed in a _PSx method which gets called on entry to power + state Dx. + + -- be declared separately as power resources with their own _ON and _OFF + methods. They are then tied back to D-states for a particular device + via _PRx which specifies which power resources a device needs to be on + while in Dx. Kernel then tracks number of devices using a power resource + and calls _ON/_OFF as needed. + +The kernel ACPI code will also assume that the _PSx methods follow the normal +ACPI rules for such methods: + + -- If either _PS0 or _PS3 is implemented, then the other method must also + be implemented. + + -- If a device requires usage or setup of a power resource when on, the ASL + should organize that it is allocated/enabled using the _PS0 method. + + -- Resources allocated or enabled in the _PS0 method should be disabled + or de-allocated in the _PS3 method. + + -- Firmware will leave the resources in a reasonable state before handing + over control to the kernel. + +Such code in _PSx methods will of course be very platform specific. But, +this allows the driver to abstract out the interface for operating the device +and avoid having to read special non-standard values from ACPI tables. Further, +abstracting the use of these resources allows the hardware to change over time +without requiring updates to the driver. + + +Clocks +------ +ACPI makes the assumption that clocks are initialized by the firmware -- +UEFI, in this case -- to some working value before control is handed over +to the kernel. This has implications for devices such as UARTs, or SoC-driven +LCD displays, for example. + +When the kernel boots, the clocks are assumed to be set to reasonable +working values. If for some reason the frequency needs to change -- e.g., +throttling for power management -- the device driver should expect that +process to be abstracted out into some ACPI method that can be invoked +(please see the ACPI specification for further recommendations on standard +methods to be expected). The only exceptions to this are CPU clocks where +CPPC provides a much richer interface than ACPI methods. If the clocks +are not set, there is no direct way for Linux to control them. + +If an SoC vendor wants to provide fine-grained control of the system clocks, +they could do so by providing ACPI methods that could be invoked by Linux +drivers. However, this is NOT recommended and Linux drivers should NOT use +such methods, even if they are provided. Such methods are not currently +standardized in the ACPI specification, and using them could tie a kernel +to a very specific SoC, or tie an SoC to a very specific version of the +kernel, both of which we are trying to avoid. + + +Driver Recommendations +---------------------- +DO NOT remove any DT handling when adding ACPI support for a driver. The +same device may be used on many different systems. + +DO try to structure the driver so that it is data-driven. That is, set up +a struct containing internal per-device state based on defaults and whatever +else must be discovered by the driver probe function. Then, have the rest +of the driver operate off of the contents of that struct. Doing so should +allow most divergence between ACPI and DT functionality to be kept local to +the probe function instead of being scattered throughout the driver. For +example: + +static int device_probe_dt(struct platform_device *pdev) +{ + /* DT specific functionality */ + ... +} + +static int device_probe_acpi(struct platform_device *pdev) +{ + /* ACPI specific functionality */ + ... +} + +static int device_probe(struct platform_device *pdev) +{ + ... + struct device_node node = pdev->dev.of_node; + ... + + if (node) + ret = device_probe_dt(pdev); + else if (ACPI_HANDLE(&pdev->dev)) + ret = device_probe_acpi(pdev); + else + /* other initialization */ + ... + /* Continue with any generic probe operations */ + ... +} + +DO keep the MODULE_DEVICE_TABLE entries together in the driver to make it +clear the different names the driver is probed for, both from DT and from +ACPI: + +static struct of_device_id virtio_mmio_match[] = { + { .compatible = "virtio,mmio", }, + { } +}; +MODULE_DEVICE_TABLE(of, virtio_mmio_match); + +static const struct acpi_device_id virtio_mmio_acpi_match[] = { + { "LNRO0005", }, + { } +}; +MODULE_DEVICE_TABLE(acpi, virtio_mmio_acpi_match); + + +ASWG +---- +The ACPI specification changes regularly. During the year 2014, for instance, +version 5.1 was released and version 6.0 substantially completed, with most of +the changes being driven by ARM-specific requirements. Proposed changes are +presented and discussed in the ASWG (ACPI Specification Working Group) which +is a part of the UEFI Forum. + +Participation in this group is open to all UEFI members. Please see +http://www.uefi.org/workinggroup for details on group membership. + +It is the intent of the ARMv8 ACPI kernel code to follow the ACPI specification +as closely as possible, and to only implement functionality that complies with +the released standards from UEFI ASWG. As a practical matter, there will be +vendors that provide bad ACPI tables or violate the standards in some way. +If this is because of errors, quirks and fixups may be necessary, but will +be avoided if possible. If there are features missing from ACPI that preclude +it from being used on a platform, ECRs (Engineering Change Requests) should be +submitted to ASWG and go through the normal approval process; for those that +are not UEFI members, many other members of the Linux community are and would +likely be willing to assist in submitting ECRs. + + +Linux Code +---------- +Individual items specific to Linux on ARM, contained in the the Linux +source code, are in the list that follows: + +ACPI_OS_NAME This macro defines the string to be returned when + an ACPI method invokes the _OS method. On ARM64 + systems, this macro will be "Linux" by default. + The command line parameter acpi_os= + can be used to set it to some other value. The + default value for other architectures is "Microsoft + Windows NT", for example. + +ACPI Objects +------------ +Detailed expectations for ACPI tables and object are listed in the file +Documentation/arm64/acpi_object_usage.txt. + + +References +---------- +[0] http://silver.arm.com -- document ARM-DEN-0029, or newer + "Server Base System Architecture", version 2.3, dated 27 Mar 2014 + +[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0044a/Server_Base_Boot_Requirements.pdf + Document ARM-DEN-0044A, or newer: "Server Base Boot Requirements, System + Software on ARM Platforms", dated 16 Aug 2014 + +[2] http://www.secretlab.ca/archives/151, 10 Jan 2015, Copyright (c) 2015, + Linaro Ltd., written by Grant Likely. A copy of the verbatim text (apart + from formatting) is also in Documentation/arm64/why_use_acpi.txt. + +[3] AMD ACPI for Seattle platform documentation: + http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2012/10/Seattle_ACPI_Guide.pdf + +[4] http://www.uefi.org/acpi -- please see the link for the "ACPI _DSD Device + Property Registry Instructions" + +[5] http://www.uefi.org/acpi -- please see the link for the "_DSD (Device + Specific Data) Implementation Guide" + +[6] Kernel code for the unified device property interface can be found in + include/linux/property.h and drivers/base/property.c. + + +Authors +------- +Al Stone +Graeme Gregory +Hanjun Guo + +Grant Likely , for the "Why ACPI on ARM?" section diff --git a/Documentation/atomic_ops.txt b/Documentation/atomic_ops.txt index 183e41bdcb69b5e05224cfe46dfaa427907482bf..dab6da3382d9f0b5f3c1e9f6e3fafc0cc2535de2 100644 --- a/Documentation/atomic_ops.txt +++ b/Documentation/atomic_ops.txt @@ -201,11 +201,11 @@ These routines add 1 and subtract 1, respectively, from the given atomic_t and return the new counter value after the operation is performed. -Unlike the above routines, it is required that explicit memory -barriers are performed before and after the operation. It must be -done such that all memory operations before and after the atomic -operation calls are strongly ordered with respect to the atomic -operation itself. +Unlike the above routines, it is required that these primitives +include explicit memory barriers that are performed before and after +the operation. It must be done such that all memory operations before +and after the atomic operation calls are strongly ordered with respect +to the atomic operation itself. For example, it should behave as if a smp_mb() call existed both before and after the atomic operation. @@ -233,21 +233,21 @@ These two routines increment and decrement by 1, respectively, the given atomic counter. They return a boolean indicating whether the resulting counter value was zero or not. -It requires explicit memory barrier semantics around the operation as -above. +Again, these primitives provide explicit memory barrier semantics around +the atomic operation. int atomic_sub_and_test(int i, atomic_t *v); This is identical to atomic_dec_and_test() except that an explicit -decrement is given instead of the implicit "1". It requires explicit -memory barrier semantics around the operation. +decrement is given instead of the implicit "1". This primitive must +provide explicit memory barrier semantics around the operation. int atomic_add_negative(int i, atomic_t *v); -The given increment is added to the given atomic counter value. A -boolean is return which indicates whether the resulting counter value -is negative. It requires explicit memory barrier semantics around the -operation. +The given increment is added to the given atomic counter value. A boolean +is return which indicates whether the resulting counter value is negative. +This primitive must provide explicit memory barrier semantics around +the operation. Then: @@ -257,7 +257,7 @@ This performs an atomic exchange operation on the atomic variable v, setting the given new value. It returns the old value that the atomic variable v had just before the operation. -atomic_xchg requires explicit memory barriers around the operation. +atomic_xchg must provide explicit memory barriers around the operation. int atomic_cmpxchg(atomic_t *v, int old, int new); @@ -266,7 +266,7 @@ with the given old and new values. Like all atomic_xxx operations, atomic_cmpxchg will only satisfy its atomicity semantics as long as all other accesses of *v are performed through atomic_xxx operations. -atomic_cmpxchg requires explicit memory barriers around the operation. +atomic_cmpxchg must provide explicit memory barriers around the operation. The semantics for atomic_cmpxchg are the same as those defined for 'cas' below. @@ -279,8 +279,8 @@ If the atomic value v is not equal to u, this function adds a to v, and returns non zero. If v is equal to u then it returns zero. This is done as an atomic operation. -atomic_add_unless requires explicit memory barriers around the operation -unless it fails (returns 0). +atomic_add_unless must provide explicit memory barriers around the +operation unless it fails (returns 0). atomic_inc_not_zero, equivalent to atomic_add_unless(v, 1, 0) @@ -460,9 +460,9 @@ the return value into an int. There are other places where things like this occur as well. These routines, like the atomic_t counter operations returning values, -require explicit memory barrier semantics around their execution. All -memory operations before the atomic bit operation call must be made -visible globally before the atomic bit operation is made visible. +must provide explicit memory barrier semantics around their execution. +All memory operations before the atomic bit operation call must be +made visible globally before the atomic bit operation is made visible. Likewise, the atomic bit operation must be visible globally before any subsequent memory operation is made visible. For example: @@ -536,8 +536,9 @@ except that two underscores are prefixed to the interface name. These non-atomic variants also do not require any special memory barrier semantics. -The routines xchg() and cmpxchg() need the same exact memory barriers -as the atomic and bit operations returning values. +The routines xchg() and cmpxchg() must provide the same exact +memory-barrier semantics as the atomic and bit operations returning +values. Spinlocks and rwlocks have memory barrier expectations as well. The rule to follow is simple: diff --git a/Documentation/blackfin/Makefile b/Documentation/blackfin/Makefile index 03f78059d6f5849b7914d50a2983fb6f9d678eb9..6782c58fbc297d830fdf5a1a034b7b28ce0bce02 100644 --- a/Documentation/blackfin/Makefile +++ b/Documentation/blackfin/Makefile @@ -1,5 +1,5 @@ ifneq ($(CONFIG_BLACKFIN),) -ifneq ($(CONFIG_BFIN_GPTIMERS,) +ifneq ($(CONFIG_BFIN_GPTIMERS),) obj-m := gptimers-example.o endif endif diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index 5aabc08de811d49ba898d550a0c2ff98ab3964a5..fd12c0d835fd1eca07f9c3bf8ef28eb7e877d3f2 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -48,8 +48,7 @@ Description of Contents: - Highmem I/O support - I/O scheduler modularization 1.2 Tuning based on high level requirements/capabilities - 1.2.1 I/O Barriers - 1.2.2 Request Priority/Latency + 1.2.1 Request Priority/Latency 1.3 Direct access/bypass to lower layers for diagnostics and special device operations 1.3.1 Pre-built commands @@ -255,29 +254,12 @@ some control over i/o ordering. What kind of support exists at the generic block layer for this ? The flags and rw fields in the bio structure can be used for some tuning -from above e.g indicating that an i/o is just a readahead request, or for -marking barrier requests (discussed next), or priority settings (currently -unused). As far as user applications are concerned they would need an -additional mechanism either via open flags or ioctls, or some other upper -level mechanism to communicate such settings to block. - -1.2.1 I/O Barriers - -There is a way to enforce strict ordering for i/os through barriers. -All requests before a barrier point must be serviced before the barrier -request and any other requests arriving after the barrier will not be -serviced until after the barrier has completed. This is useful for higher -level control on write ordering, e.g flushing a log of committed updates -to disk before the corresponding updates themselves. - -A flag in the bio structure, BIO_BARRIER is used to identify a barrier i/o. -The generic i/o scheduler would make sure that it places the barrier request and -all other requests coming after it after all the previous requests in the -queue. Barriers may be implemented in different ways depending on the -driver. For more details regarding I/O barriers, please read barrier.txt -in this directory. - -1.2.2 Request Priority/Latency +from above e.g indicating that an i/o is just a readahead request, or priority +settings (currently unused). As far as user applications are concerned they +would need an additional mechanism either via open flags or ioctls, or some +other upper level mechanism to communicate such settings to block. + +1.2.1 Request Priority/Latency Todo/Under discussion: Arjan's proposed request priority scheme allows higher levels some broad @@ -906,8 +888,8 @@ queue and specific I/O schedulers. Unless stated otherwise, elevator is used to refer to both parts and I/O scheduler to specific I/O schedulers. Block layer implements generic dispatch queue in block/*.c. -The generic dispatch queue is responsible for properly ordering barrier -requests, requeueing, handling non-fs requests and all other subtleties. +The generic dispatch queue is responsible for requeueing, handling non-fs +requests and all other subtleties. Specific I/O schedulers are responsible for ordering normal filesystem requests. They can also choose to delay certain requests to improve diff --git a/Documentation/blockdev/nbd.txt b/Documentation/blockdev/nbd.txt index 271e607304da0449a2c7b0f90841efa7aa55e876..db242ea2bce8cbedf40ad8e8b557168690b54e6b 100644 --- a/Documentation/blockdev/nbd.txt +++ b/Documentation/blockdev/nbd.txt @@ -1,17 +1,31 @@ - Network Block Device (TCP version) - - What is it: With this compiled in the kernel (or as a module), Linux - can use a remote server as one of its block devices. So every time - the client computer wants to read, e.g., /dev/nb0, it sends a - request over TCP to the server, which will reply with the data read. - This can be used for stations with low disk space (or even diskless) - to borrow disk space from another computer. - Unlike NFS, it is possible to put any filesystem on it, etc. - - For more information, or to download the nbd-client and nbd-server - tools, go to http://nbd.sf.net/. - - The nbd kernel module need only be installed on the client - system, as the nbd-server is completely in userspace. In fact, - the nbd-server has been successfully ported to other operating - systems, including Windows. +Network Block Device (TCP version) +================================== + +1) Overview +----------- + +What is it: With this compiled in the kernel (or as a module), Linux +can use a remote server as one of its block devices. So every time +the client computer wants to read, e.g., /dev/nb0, it sends a +request over TCP to the server, which will reply with the data read. +This can be used for stations with low disk space (or even diskless) +to borrow disk space from another computer. +Unlike NFS, it is possible to put any filesystem on it, etc. + +For more information, or to download the nbd-client and nbd-server +tools, go to http://nbd.sf.net/. + +The nbd kernel module need only be installed on the client +system, as the nbd-server is completely in userspace. In fact, +the nbd-server has been successfully ported to other operating +systems, including Windows. + +A) NBD parameters +----------------- + +max_part + Number of partitions per device (default: 0). + +nbds_max + Number of block devices that should be initialized (default: 16). + diff --git a/Documentation/blockdev/zram.txt b/Documentation/blockdev/zram.txt index 7fcf9c6592ecc45d0765b7f1ae018228e8f758f7..48a183e29988d968ee11172a2bd2f9726c4ad65b 100644 --- a/Documentation/blockdev/zram.txt +++ b/Documentation/blockdev/zram.txt @@ -98,20 +98,79 @@ size of the disk when not in use so a huge zram is wasteful. mount /dev/zram1 /tmp 7) Stats: - Per-device statistics are exported as various nodes under - /sys/block/zram/ - disksize - num_reads - num_writes - failed_reads - failed_writes - invalid_io - notify_free - zero_pages - orig_data_size - compr_data_size - mem_used_total - mem_used_max +Per-device statistics are exported as various nodes under /sys/block/zram/ + +A brief description of exported device attritbutes. For more details please +read Documentation/ABI/testing/sysfs-block-zram. + +Name access description +---- ------ ----------- +disksize RW show and set the device's disk size +initstate RO shows the initialization state of the device +reset WO trigger device reset +num_reads RO the number of reads +failed_reads RO the number of failed reads +num_write RO the number of writes +failed_writes RO the number of failed writes +invalid_io RO the number of non-page-size-aligned I/O requests +max_comp_streams RW the number of possible concurrent compress operations +comp_algorithm RW show and change the compression algorithm +notify_free RO the number of notifications to free pages (either + slot free notifications or REQ_DISCARD requests) +zero_pages RO the number of zero filled pages written to this disk +orig_data_size RO uncompressed size of data stored in this disk +compr_data_size RO compressed size of data stored in this disk +mem_used_total RO the amount of memory allocated for this disk +mem_used_max RW the maximum amount memory zram have consumed to + store compressed data +mem_limit RW the maximum amount of memory ZRAM can use to store + the compressed data +num_migrated RO the number of objects migrated migrated by compaction + + +WARNING +======= +per-stat sysfs attributes are considered to be deprecated. +The basic strategy is: +-- the existing RW nodes will be downgraded to WO nodes (in linux 4.11) +-- deprecated RO sysfs nodes will eventually be removed (in linux 4.11) + +The list of deprecated attributes can be found here: +Documentation/ABI/obsolete/sysfs-block-zram + +Basically, every attribute that has its own read accessible sysfs node +(e.g. num_reads) *AND* is accessible via one of the stat files (zram/stat +or zram/io_stat or zram/mm_stat) is considered to be deprecated. + +User space is advised to use the following files to read the device statistics. + +File /sys/block/zram/stat + +Represents block layer statistics. Read Documentation/block/stat.txt for +details. + +File /sys/block/zram/io_stat + +The stat file represents device's I/O statistics not accounted by block +layer and, thus, not available in zram/stat file. It consists of a +single line of text and contains the following stats separated by +whitespace: + failed_reads + failed_writes + invalid_io + notify_free + +File /sys/block/zram/mm_stat + +The stat file represents device's mm statistics. It consists of a single +line of text and contains the following stats separated by whitespace: + orig_data_size + compr_data_size + mem_used_total + mem_limit + mem_used_max + zero_pages + num_migrated 8) Deactivate: swapoff /dev/zram0 diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index a22df3ad35fff8a43d78517f790a9822aa5d8d55..f456b4315e86d80abe8d4d0b4fbb68eeca5b4e4a 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -275,11 +275,6 @@ When oom event notifier is registered, event will be delivered. 2.7 Kernel Memory Extension (CONFIG_MEMCG_KMEM) -WARNING: Current implementation lacks reclaim support. That means allocation - attempts will fail when close to the limit even if there are plenty of - kmem available for reclaim. That makes this option unusable in real - life so DO NOT SELECT IT unless for development purposes. - With the Kernel memory extension, the Memory Controller is able to limit the amount of kernel memory used by the system. Kernel memory is fundamentally different than user memory, since it can't be swapped out, which makes it @@ -345,6 +340,9 @@ set: In this case, the admin could set up K so that the sum of all groups is never greater than the total memory, and freely set U at the cost of his QoS. + WARNING: In the current implementation, memory reclaim will NOT be + triggered for a cgroup when it hits K while staying below U, which makes + this setup impractical. U != 0, K >= U: Since kmem charges will also be fed to the user counter and reclaim will be diff --git a/Documentation/cma/debugfs.txt b/Documentation/cma/debugfs.txt new file mode 100644 index 0000000000000000000000000000000000000000..6cef20a8cedc824b86e74c3b9123c3dfc6dcab98 --- /dev/null +++ b/Documentation/cma/debugfs.txt @@ -0,0 +1,21 @@ +The CMA debugfs interface is useful to retrieve basic information out of the +different CMA areas and to test allocation/release in each of the areas. + +Each CMA zone represents a directory under /cma/, indexed by the +kernel's CMA index. So the first CMA zone would be: + + /cma/cma-0 + +The structure of the files created under that directory is as follows: + + - [RO] base_pfn: The base PFN (Page Frame Number) of the zone. + - [RO] count: Amount of memory in the CMA area. + - [RO] order_per_bit: Order of pages represented by one bit. + - [RO] bitmap: The bitmap of page states in the zone. + - [WO] alloc: Allocate N pages from that CMA area. For example: + + echo 5 > /cma/cma-2/alloc + +would try to allocate 5 pages from the cma-2 area. + + - [WO] free: Free N pages from that CMA area, similar to the above. diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt index a0b005d2bd95ce8d0251679adc90002a6e3b4809..f9ad5e048b111297549df37cc6a6fc8bff1fc75a 100644 --- a/Documentation/cpu-hotplug.txt +++ b/Documentation/cpu-hotplug.txt @@ -108,7 +108,7 @@ Never use anything other than cpumask_t to represent bitmap of CPUs. for_each_possible_cpu - Iterate over cpu_possible_mask for_each_online_cpu - Iterate over cpu_online_mask for_each_present_cpu - Iterate over cpu_present_mask - for_each_cpu_mask(x,mask) - Iterate over some random collection of cpu mask. + for_each_cpu(x,mask) - Iterate over some random collection of cpu mask. #include get_online_cpus() and put_online_cpus(): diff --git a/Documentation/crypto/crypto-API-userspace.txt b/Documentation/crypto/crypto-API-userspace.txt deleted file mode 100644 index ac619cd9030004b24c3e47db53762a032e3c19d7..0000000000000000000000000000000000000000 --- a/Documentation/crypto/crypto-API-userspace.txt +++ /dev/null @@ -1,205 +0,0 @@ -Introduction -============ - -The concepts of the kernel crypto API visible to kernel space is fully -applicable to the user space interface as well. Therefore, the kernel crypto API -high level discussion for the in-kernel use cases applies here as well. - -The major difference, however, is that user space can only act as a consumer -and never as a provider of a transformation or cipher algorithm. - -The following covers the user space interface exported by the kernel crypto -API. A working example of this description is libkcapi that can be obtained from -[1]. That library can be used by user space applications that require -cryptographic services from the kernel. - -Some details of the in-kernel kernel crypto API aspects do not -apply to user space, however. This includes the difference between synchronous -and asynchronous invocations. The user space API call is fully synchronous. -In addition, only a subset of all cipher types are available as documented -below. - - -User space API general remarks -============================== - -The kernel crypto API is accessible from user space. Currently, the following -ciphers are accessible: - - * Message digest including keyed message digest (HMAC, CMAC) - - * Symmetric ciphers - -Note, AEAD ciphers are currently not supported via the symmetric cipher -interface. - -The interface is provided via Netlink using the type AF_ALG. In addition, the -setsockopt option type is SOL_ALG. In case the user space header files do not -export these flags yet, use the following macros: - -#ifndef AF_ALG -#define AF_ALG 38 -#endif -#ifndef SOL_ALG -#define SOL_ALG 279 -#endif - -A cipher is accessed with the same name as done for the in-kernel API calls. -This includes the generic vs. unique naming schema for ciphers as well as the -enforcement of priorities for generic names. - -To interact with the kernel crypto API, a Netlink socket must be created by -the user space application. User space invokes the cipher operation with the -send/write system call family. The result of the cipher operation is obtained -with the read/recv system call family. - -The following API calls assume that the Netlink socket descriptor is already -opened by the user space application and discusses only the kernel crypto API -specific invocations. - -To initialize a Netlink interface, the following sequence has to be performed -by the consumer: - - 1. Create a socket of type AF_ALG with the struct sockaddr_alg parameter - specified below for the different cipher types. - - 2. Invoke bind with the socket descriptor - - 3. Invoke accept with the socket descriptor. The accept system call - returns a new file descriptor that is to be used to interact with - the particular cipher instance. When invoking send/write or recv/read - system calls to send data to the kernel or obtain data from the - kernel, the file descriptor returned by accept must be used. - -In-place cipher operation -========================= - -Just like the in-kernel operation of the kernel crypto API, the user space -interface allows the cipher operation in-place. That means that the input buffer -used for the send/write system call and the output buffer used by the read/recv -system call may be one and the same. This is of particular interest for -symmetric cipher operations where a copying of the output data to its final -destination can be avoided. - -If a consumer on the other hand wants to maintain the plaintext and the -ciphertext in different memory locations, all a consumer needs to do is to -provide different memory pointers for the encryption and decryption operation. - -Message digest API -================== - -The message digest type to be used for the cipher operation is selected when -invoking the bind syscall. bind requires the caller to provide a filled -struct sockaddr data structure. This data structure must be filled as follows: - -struct sockaddr_alg sa = { - .salg_family = AF_ALG, - .salg_type = "hash", /* this selects the hash logic in the kernel */ - .salg_name = "sha1" /* this is the cipher name */ -}; - -The salg_type value "hash" applies to message digests and keyed message digests. -Though, a keyed message digest is referenced by the appropriate salg_name. -Please see below for the setsockopt interface that explains how the key can be -set for a keyed message digest. - -Using the send() system call, the application provides the data that should be -processed with the message digest. The send system call allows the following -flags to be specified: - - * MSG_MORE: If this flag is set, the send system call acts like a - message digest update function where the final hash is not - yet calculated. If the flag is not set, the send system call - calculates the final message digest immediately. - -With the recv() system call, the application can read the message digest from -the kernel crypto API. If the buffer is too small for the message digest, the -flag MSG_TRUNC is set by the kernel. - -In order to set a message digest key, the calling application must use the -setsockopt() option of ALG_SET_KEY. If the key is not set the HMAC operation is -performed without the initial HMAC state change caused by the key. - - -Symmetric cipher API -==================== - -The operation is very similar to the message digest discussion. During -initialization, the struct sockaddr data structure must be filled as follows: - -struct sockaddr_alg sa = { - .salg_family = AF_ALG, - .salg_type = "skcipher", /* this selects the symmetric cipher */ - .salg_name = "cbc(aes)" /* this is the cipher name */ -}; - -Before data can be sent to the kernel using the write/send system call family, -the consumer must set the key. The key setting is described with the setsockopt -invocation below. - -Using the sendmsg() system call, the application provides the data that should -be processed for encryption or decryption. In addition, the IV is specified -with the data structure provided by the sendmsg() system call. - -The sendmsg system call parameter of struct msghdr is embedded into the -struct cmsghdr data structure. See recv(2) and cmsg(3) for more information -on how the cmsghdr data structure is used together with the send/recv system -call family. That cmsghdr data structure holds the following information -specified with a separate header instances: - - * specification of the cipher operation type with one of these flags: - ALG_OP_ENCRYPT - encryption of data - ALG_OP_DECRYPT - decryption of data - - * specification of the IV information marked with the flag ALG_SET_IV - -The send system call family allows the following flag to be specified: - - * MSG_MORE: If this flag is set, the send system call acts like a - cipher update function where more input data is expected - with a subsequent invocation of the send system call. - -Note: The kernel reports -EINVAL for any unexpected data. The caller must -make sure that all data matches the constraints given in /proc/crypto for the -selected cipher. - -With the recv() system call, the application can read the result of the -cipher operation from the kernel crypto API. The output buffer must be at least -as large as to hold all blocks of the encrypted or decrypted data. If the output -data size is smaller, only as many blocks are returned that fit into that -output buffer size. - -Setsockopt interface -==================== - -In addition to the read/recv and send/write system call handling to send and -retrieve data subject to the cipher operation, a consumer also needs to set -the additional information for the cipher operation. This additional information -is set using the setsockopt system call that must be invoked with the file -descriptor of the open cipher (i.e. the file descriptor returned by the -accept system call). - -Each setsockopt invocation must use the level SOL_ALG. - -The setsockopt interface allows setting the following data using the mentioned -optname: - - * ALG_SET_KEY -- Setting the key. Key setting is applicable to: - - - the skcipher cipher type (symmetric ciphers) - - - the hash cipher type (keyed message digests) - -User space API example -====================== - -Please see [1] for libkcapi which provides an easy-to-use wrapper around the -aforementioned Netlink kernel interface. [1] also contains a test application -that invokes all libkcapi API calls. - -[1] http://www.chronox.de/libkcapi.html - -Author -====== - -Stephan Mueller diff --git a/Documentation/device-mapper/dm-crypt.txt b/Documentation/device-mapper/dm-crypt.txt index ad697781f9ac478477cfed76978b047685eda2b6..692171fe9da0307732b96327e10848e1d12e2e26 100644 --- a/Documentation/device-mapper/dm-crypt.txt +++ b/Documentation/device-mapper/dm-crypt.txt @@ -5,7 +5,7 @@ Device-Mapper's "crypt" target provides transparent encryption of block devices using the kernel crypto API. For a more detailed description of supported parameters see: -http://code.google.com/p/cryptsetup/wiki/DMCrypt +https://gitlab.com/cryptsetup/cryptsetup/wikis/DMCrypt Parameters: \ [<#opt_params> ] @@ -80,7 +80,7 @@ Example scripts =============== LUKS (Linux Unified Key Setup) is now the preferred way to set up disk encryption with dm-crypt using the 'cryptsetup' utility, see -http://code.google.com/p/cryptsetup/ +https://gitlab.com/cryptsetup/cryptsetup [[ #!/bin/sh diff --git a/Documentation/device-mapper/log-writes.txt b/Documentation/device-mapper/log-writes.txt new file mode 100644 index 0000000000000000000000000000000000000000..c10f30c9b534ef7eb1c8a5c838c914148a6cd105 --- /dev/null +++ b/Documentation/device-mapper/log-writes.txt @@ -0,0 +1,140 @@ +dm-log-writes +============= + +This target takes 2 devices, one to pass all IO to normally, and one to log all +of the write operations to. This is intended for file system developers wishing +to verify the integrity of metadata or data as the file system is written to. +There is a log_write_entry written for every WRITE request and the target is +able to take arbitrary data from userspace to insert into the log. The data +that is in the WRITE requests is copied into the log to make the replay happen +exactly as it happened originally. + +Log Ordering +============ + +We log things in order of completion once we are sure the write is no longer in +cache. This means that normal WRITE requests are not actually logged until the +next REQ_FLUSH request. This is to make it easier for userspace to replay the +log in a way that correlates to what is on disk and not what is in cache, to +make it easier to detect improper waiting/flushing. + +This works by attaching all WRITE requests to a list once the write completes. +Once we see a REQ_FLUSH request we splice this list onto the request and once +the FLUSH request completes we log all of the WRITEs and then the FLUSH. Only +completed WRITEs, at the time the REQ_FLUSH is issued, are added in order to +simulate the worst case scenario with regard to power failures. Consider the +following example (W means write, C means complete): + +W1,W2,W3,C3,C2,Wflush,C1,Cflush + +The log would show the following + +W3,W2,flush,W1.... + +Again this is to simulate what is actually on disk, this allows us to detect +cases where a power failure at a particular point in time would create an +inconsistent file system. + +Any REQ_FUA requests bypass this flushing mechanism and are logged as soon as +they complete as those requests will obviously bypass the device cache. + +Any REQ_DISCARD requests are treated like WRITE requests. Otherwise we would +have all the DISCARD requests, and then the WRITE requests and then the FLUSH +request. Consider the following example: + +WRITE block 1, DISCARD block 1, FLUSH + +If we logged DISCARD when it completed, the replay would look like this + +DISCARD 1, WRITE 1, FLUSH + +which isn't quite what happened and wouldn't be caught during the log replay. + +Target interface +================ + +i) Constructor + + log-writes + + dev_path : Device that all of the IO will go to normally. + log_dev_path : Device where the log entries are written to. + +ii) Status + + <#logged entries> + + #logged entries : Number of logged entries + highest allocated sector : Highest allocated sector + +iii) Messages + + mark + + You can use a dmsetup message to set an arbitrary mark in a log. + For example say you want to fsck a file system after every + write, but first you need to replay up to the mkfs to make sure + we're fsck'ing something reasonable, you would do something like + this: + + mkfs.btrfs -f /dev/mapper/log + dmsetup message log 0 mark mkfs + + + This would allow you to replay the log up to the mkfs mark and + then replay from that point on doing the fsck check in the + interval that you want. + + Every log has a mark at the end labeled "dm-log-writes-end". + +Userspace component +=================== + +There is a userspace tool that will replay the log for you in various ways. +It can be found here: https://github.com/josefbacik/log-writes + +Example usage +============= + +Say you want to test fsync on your file system. You would do something like +this: + +TABLE="0 $(blockdev --getsz /dev/sdb) log-writes /dev/sdb /dev/sdc" +dmsetup create log --table "$TABLE" +mkfs.btrfs -f /dev/mapper/log +dmsetup message log 0 mark mkfs + +mount /dev/mapper/log /mnt/btrfs-test + +dmsetup message log 0 mark fsync +md5sum /mnt/btrfs-test/foo +umount /mnt/btrfs-test + +dmsetup remove log +replay-log --log /dev/sdc --replay /dev/sdb --end-mark fsync +mount /dev/sdb /mnt/btrfs-test +md5sum /mnt/btrfs-test/foo + + +Another option is to do a complicated file system operation and verify the file +system is consistent during the entire operation. You could do this with: + +TABLE="0 $(blockdev --getsz /dev/sdb) log-writes /dev/sdb /dev/sdc" +dmsetup create log --table "$TABLE" +mkfs.btrfs -f /dev/mapper/log +dmsetup message log 0 mark mkfs + +mount /dev/mapper/log /mnt/btrfs-test + +btrfs filesystem balance /mnt/btrfs-test +umount /mnt/btrfs-test +dmsetup remove log + +replay-log --log /dev/sdc --replay /dev/sdb --end-mark mkfs +btrfsck /dev/sdb +replay-log --log /dev/sdc --replay /dev/sdb --start-mark mkfs \ + --fsck "btrfsck /dev/sdb" --check fua + +And that will replay the log until it sees a FUA request, run the fsck command +and if the fsck passes it will replay to the next FUA, until it is completed or +the fsck command exists abnormally. diff --git a/Documentation/device-mapper/switch.txt b/Documentation/device-mapper/switch.txt index 8897d04948384289b3fca54801be9676c15ce0e5..424835e57f2713df8e349883c02bce0771aa7012 100644 --- a/Documentation/device-mapper/switch.txt +++ b/Documentation/device-mapper/switch.txt @@ -47,8 +47,8 @@ consume far too much memory. Using this device-mapper switch target we can now build a two-layer device hierarchy: - Upper Tier – Determine which array member the I/O should be sent to. - Lower Tier – Load balance amongst paths to a particular member. + Upper Tier - Determine which array member the I/O should be sent to. + Lower Tier - Load balance amongst paths to a particular member. The lower tier consists of a single dm multipath device for each member. Each of these multipath devices contains the set of paths directly to diff --git a/Documentation/device-mapper/thin-provisioning.txt b/Documentation/device-mapper/thin-provisioning.txt index 2f5173500bd953b32e55134012af50ac93e46ad8..4f67578b295483bcc14d48f069c6ded3581e3f94 100644 --- a/Documentation/device-mapper/thin-provisioning.txt +++ b/Documentation/device-mapper/thin-provisioning.txt @@ -380,9 +380,6 @@ then you'll have no access to blocks mapped beyond the end. If you load a target that is bigger than before, then extra blocks will be provisioned as and when needed. -If you wish to reduce the size of your thin device and potentially -regain some space then send the 'trim' message to the pool. - ii) Status diff --git a/Documentation/device-mapper/verity.txt b/Documentation/device-mapper/verity.txt index 9884681535ee36bf03a7d7baaa54abb36360d53d..e15bc1a0fb98ab23563681210cc6ed1865234816 100644 --- a/Documentation/device-mapper/verity.txt +++ b/Documentation/device-mapper/verity.txt @@ -11,6 +11,7 @@ Construction Parameters + [<#opt_params> ] This is the type of the on-disk hash format. @@ -62,6 +63,22 @@ Construction Parameters The hexadecimal encoding of the salt value. +<#opt_params> + Number of optional parameters. If there are no optional parameters, + the optional paramaters section can be skipped or #opt_params can be zero. + Otherwise #opt_params is the number of following arguments. + + Example of optional parameters section: + 1 ignore_corruption + +ignore_corruption + Log corrupted blocks, but allow read operations to proceed normally. + +restart_on_corruption + Restart the system when a corrupted block is discovered. This option is + not compatible with ignore_corruption and requires user space support to + avoid restart loops. + Theory of operation =================== @@ -125,7 +142,7 @@ block boundary) are the hash blocks which are stored a depth at a time The full specification of kernel parameters and on-disk metadata format is available at the cryptsetup project's wiki page - http://code.google.com/p/cryptsetup/wiki/DMVerity + https://gitlab.com/cryptsetup/cryptsetup/wikis/DMVerity Status ====== @@ -142,7 +159,7 @@ Set up a device: A command line tool veritysetup is available to compute or verify the hash tree or activate the kernel device. This is available from -the cryptsetup upstream repository http://code.google.com/p/cryptsetup/ +the cryptsetup upstream repository https://gitlab.com/cryptsetup/cryptsetup/ (as a libcryptsetup extension). Create hash on the device: diff --git a/Documentation/devicetree/bindings/arc/pct.txt b/Documentation/devicetree/bindings/arc/pct.txt new file mode 100644 index 0000000000000000000000000000000000000000..7b9588444f20b7a15cf9e317f243ae616f4631d8 --- /dev/null +++ b/Documentation/devicetree/bindings/arc/pct.txt @@ -0,0 +1,20 @@ +* ARC Performance Counters + +The ARC700 can be configured with a pipeline performance monitor for counting +CPU and cache events like cache misses and hits. Like conventional PCT there +are 100+ hardware conditions dynamically mapped to upto 32 counters + +Note that: + * The ARC 700 PCT does not support interrupts; although HW events may be + counted, the HW events themselves cannot serve as a trigger for a sample. + +Required properties: + +- compatible : should contain + "snps,arc700-pct" + +Example: + +pmu { + compatible = "snps,arc700-pct"; +}; diff --git a/Documentation/devicetree/bindings/arc/pmu.txt b/Documentation/devicetree/bindings/arc/pmu.txt deleted file mode 100644 index 49d517340de353fb19e51754a33797381ad090d3..0000000000000000000000000000000000000000 --- a/Documentation/devicetree/bindings/arc/pmu.txt +++ /dev/null @@ -1,24 +0,0 @@ -* ARC Performance Monitor Unit - -The ARC 700 can be configured with a pipeline performance monitor for counting -CPU and cache events like cache misses and hits. - -Note that: - * ARC 700 refers to a family of ARC processor cores; - - There is only one type of PMU available for the whole family; - - The PMU may support different sets of events; supported events are probed - at boot time, as required by the reference manual. - - * The ARC 700 PMU does not support interrupts; although HW events may be - counted, the HW events themselves cannot serve as a trigger for a sample. - -Required properties: - -- compatible : should contain - "snps,arc700-pmu" - -Example: - -pmu { - compatible = "snps,arc700-pmu"; -}; diff --git a/Documentation/devicetree/bindings/arm/al,alpine.txt b/Documentation/devicetree/bindings/arm/al,alpine.txt new file mode 100644 index 0000000000000000000000000000000000000000..f404a4f9b165592b62562aea0c45b52ba19e477a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/al,alpine.txt @@ -0,0 +1,88 @@ +Annapurna Labs Alpine Platform Device Tree Bindings +--------------------------------------------------------------- + +Boards in the Alpine family shall have the following properties: + +* Required root node properties: +compatible: must contain "al,alpine" + +* Example: + +/ { + model = "Annapurna Labs Alpine Dev Board"; + compatible = "al,alpine"; + + ... +} + +* CPU node: + +The Alpine platform includes cortex-a15 cores. +enable-method: must be "al,alpine-smp" to allow smp [1] + +Example: + +cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "al,alpine-smp"; + + cpu@0 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <1>; + }; + + cpu@2 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <3>; + }; +}; + + +* Alpine CPU resume registers + +The CPU resume register are used to define required resume address after +reset. + +Properties: +- compatible : Should contain "al,alpine-cpu-resume". +- reg : Offset and length of the register set for the device + +Example: + +cpu_resume { + compatible = "al,alpine-cpu-resume"; + reg = <0xfbff5ed0 0x30>; +}; + +* Alpine System-Fabric Service Registers + +The System-Fabric Service Registers allow various operation on CPU and +system fabric, like powering CPUs off. + +Properties: +- compatible : Should contain "al,alpine-sysfabric-service" and "syscon". +- reg : Offset and length of the register set for the device + +Example: + +nb_service { + compatible = "al,alpine-sysfabric-service", "syscon"; + reg = <0xfb070000 0x10000>; +}; + +[1] arm/cpu-enable-method/al,alpine-smp diff --git a/Documentation/devicetree/bindings/arm/altera.txt b/Documentation/devicetree/bindings/arm/altera.txt new file mode 100644 index 0000000000000000000000000000000000000000..558735aacca8981d0392fb1f3e0df3f3d50cf28b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/altera.txt @@ -0,0 +1,14 @@ +Altera's SoCFPGA platform device tree bindings +--------------------------------------------- + +Boards with Cyclone 5 SoC: +Required root node properties: +compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + +Boards with Arria 5 SoC: +Required root node properties: +compatible = "altr,socfpga-arria5", "altr,socfpga"; + +Boards with Arria 10 SoC: +Required root node properties: +compatible = "altr,socfpga-arria10", "altr,socfpga"; diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 8fe815046140becdbc594545d6677b8800b6a541..973884a1bacff8b9619b07f708367bf664fe7673 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -8,3 +8,7 @@ Boards with the Amlogic Meson6 SoC shall have the following properties: Boards with the Amlogic Meson8 SoC shall have the following properties: Required root node property: compatible: "amlogic,meson8"; + +Board compatible values: + - "geniatech,atv1200" + - "minix,neo-x8" diff --git a/Documentation/devicetree/bindings/arm/arch_timer.txt b/Documentation/devicetree/bindings/arm/arch_timer.txt index 256b4d8bab7b93d49330c7db5334eb05e8979904..e774128935d5c37ec88b8130ed667c5b4ff133df 100644 --- a/Documentation/devicetree/bindings/arm/arch_timer.txt +++ b/Documentation/devicetree/bindings/arm/arch_timer.txt @@ -17,7 +17,10 @@ to deliver its interrupts via SPIs. - interrupts : Interrupt list for secure, non-secure, virtual and hypervisor timers, in that order. -- clock-frequency : The frequency of the main counter, in Hz. Optional. +- clock-frequency : The frequency of the main counter, in Hz. Should be present + only where necessary to work around broken firmware which does not configure + CNTFRQ on all CPUs to a uniform correct value. Use of this property is + strongly discouraged; fix your firmware unless absolutely impossible. - always-on : a boolean property. If present, the timer is powered through an always-on power domain, therefore it never loses context. @@ -46,7 +49,8 @@ Example: - compatible : Should at least contain "arm,armv7-timer-mem". -- clock-frequency : The frequency of the main counter, in Hz. Optional. +- clock-frequency : The frequency of the main counter, in Hz. Should be present + only when firmware has not configured the MMIO CNTFRQ registers. - reg : The control frame base address. diff --git a/Documentation/devicetree/bindings/arm/armada-39x.txt b/Documentation/devicetree/bindings/arm/armada-39x.txt new file mode 100644 index 0000000000000000000000000000000000000000..53d4ff9ea8ad452705b6623cf63291af947318ce --- /dev/null +++ b/Documentation/devicetree/bindings/arm/armada-39x.txt @@ -0,0 +1,20 @@ +Marvell Armada 39x Platforms Device Tree Bindings +------------------------------------------------- + +Boards with a SoC of the Marvell Armada 39x family shall have the +following property: + +Required root node property: + + - compatible: must contain "marvell,armada390" + +In addition, boards using the Marvell Armada 398 SoC shall have the +following property before the previous one: + +Required root node property: + +compatible: must contain "marvell,armada398" + +Example: + +compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390"; diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index ad319f84f56018ba1297676c2a69586864a6b4e0..2e99b5b57350d06a43f4fbed97cde970116b595f 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -46,10 +46,12 @@ PIT Timer required properties: shared across all System Controller members. System Timer (ST) required properties: -- compatible: Should be "atmel,at91rm9200-st" +- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd" - reg: Should contain registers location and length - interrupts: Should contain interrupt for the ST which is the IRQ line shared across all System Controller members. +Its subnodes can be: +- watchdog: compatible should be "atmel,at91rm9200-wdt" TC/TCLIB Timer required properties: - compatible: Should be "atmel,-tcb". diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt similarity index 100% rename from Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method rename to Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm11351.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.txt similarity index 100% rename from Documentation/devicetree/bindings/arm/bcm/bcm11351.txt rename to Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.txt diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm21664.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.txt similarity index 100% rename from Documentation/devicetree/bindings/arm/bcm/bcm21664.txt rename to Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.txt diff --git a/Documentation/devicetree/bindings/arm/bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt similarity index 100% rename from Documentation/devicetree/bindings/arm/bcm2835.txt rename to Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt diff --git a/Documentation/devicetree/bindings/arm/bcm4708.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt similarity index 100% rename from Documentation/devicetree/bindings/arm/bcm4708.txt rename to Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm63138.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt similarity index 100% rename from Documentation/devicetree/bindings/arm/bcm/bcm63138.txt rename to Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt diff --git a/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt similarity index 100% rename from Documentation/devicetree/bindings/arm/brcm-brcmstb.txt rename to Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt diff --git a/Documentation/devicetree/bindings/arm/bcm/cygnus.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.txt similarity index 100% rename from Documentation/devicetree/bindings/arm/bcm/cygnus.txt rename to Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.txt diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt index f28d82bbbc56b3f3dff7716ede2f200f315d8e70..3c5c631328d3b6cbb4d7c9edefddf936347a545e 100644 --- a/Documentation/devicetree/bindings/arm/cci.txt +++ b/Documentation/devicetree/bindings/arm/cci.txt @@ -94,8 +94,11 @@ specific to ARM. - compatible Usage: required Value type: - Definition: must be "arm,cci-400-pmu" - + Definition: Must contain one of: + "arm,cci-400-pmu,r0" + "arm,cci-400-pmu,r1" + "arm,cci-400-pmu" - DEPRECATED, permitted only where OS has + secure acces to CCI registers - reg: Usage: required Value type: Integer cells. A register entry, expressed diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt index a3089359aaa6e58dfdf9588995d72b53ff2d1938..88602b75418e841a66d568d59652707eeb41bb4a 100644 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ b/Documentation/devicetree/bindings/arm/coresight.txt @@ -61,7 +61,6 @@ Example: compatible = "arm,coresight-etb10", "arm,primecell"; reg = <0 0x20010000 0 0x1000>; - coresight-default-sink; clocks = <&oscclk6a>; clock-names = "apb_pclk"; port { diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp new file mode 100644 index 0000000000000000000000000000000000000000..c2e0cc5e4cfdd39e08d4e34f06cf9c4a6d04e8f6 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp @@ -0,0 +1,52 @@ +======================================================== +Secondary CPU enable-method "al,alpine-smp" binding +======================================================== + +This document describes the "al,alpine-smp" method for +enabling secondary CPUs. To apply to all CPUs, a single +"al,alpine-smp" enable method should be defined in the +"cpus" node. + +Enable method name: "al,alpine-smp" +Compatible machines: "al,alpine" +Compatible CPUs: "arm,cortex-a15" +Related properties: (none) + +Note: +This enable method requires valid nodes compatible with +"al,alpine-cpu-resume" and "al,alpine-nb-service"[1]. + +Example: + +cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "al,alpine-smp"; + + cpu@0 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <1>; + }; + + cpu@2 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <3>; + }; +}; + +-- +[1] arm/al,alpine.txt diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index 8b9e0a95de317e5369932d612ac131be8ac0a641..6aa331d11c5e3e042ff2e0ec495d39e26fe0681c 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -192,6 +192,7 @@ nodes to be present and contain the properties described below. "brcm,brahma-b15" "marvell,armada-375-smp" "marvell,armada-380-smp" + "marvell,armada-390-smp" "marvell,armada-xp-smp" "qcom,gcc-msm8660" "qcom,kpss-acc-v1" diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt index 1e097037349c326a22e3f07abb3e3aca9d78d0ce..5da38c5ed476ee2248432314c0bf886305f6cc13 100644 --- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt +++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt @@ -22,6 +22,9 @@ Optional Properties: - pclkN, clkN: Pairs of parent of input clock and input clock to the devices in this power domain. Maximum of 4 pairs (N = 0 to 3) are supported currently. + - asbN: Clocks required by asynchronous bridges (ASB) present in + the power domain. These clock should be enabled during power + domain on/off operations. - power-domains: phandle pointing to the parent power domain, for more details see Documentation/devicetree/bindings/power/power_domain.txt diff --git a/Documentation/devicetree/bindings/arm/geniatech.txt b/Documentation/devicetree/bindings/arm/geniatech.txt deleted file mode 100644 index 74ccba40b73bdf131fdeed51bb3671ab40ead78f..0000000000000000000000000000000000000000 --- a/Documentation/devicetree/bindings/arm/geniatech.txt +++ /dev/null @@ -1,5 +0,0 @@ -Geniatech platforms device tree bindings -------------------------------------------- - -Geniatech ATV1200 - - compatible = "geniatech,atv1200" diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt index 1e0d21201d3aa7a02390fac92013bc3905d88b12..2da059a4790cb3c62365bedae458c5565589b225 100644 --- a/Documentation/devicetree/bindings/arm/gic.txt +++ b/Documentation/devicetree/bindings/arm/gic.txt @@ -18,6 +18,8 @@ Main node required properties: "arm,arm11mp-gic" "brcm,brahma-b15-gic" "arm,arm1176jzf-devchip-gic" + "qcom,msm-8660-qgic" + "qcom,msm-qgic2" - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an interrupt source. The type shall be a and the value shall be 3. diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt index 925ecbf6e7b7af23681aca4a413553265b41fb0e..4f40ff3fee4b102aa6b4ec460a2b7e0e4bc1a09f 100644 --- a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt +++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt @@ -42,6 +42,7 @@ board. Currently known boards are: "lacie,cloudbox" "lacie,inetspace_v2" "lacie,laplug" +"lacie,nas2big" "lacie,netspace_lite_v2" "lacie,netspace_max_v2" "lacie,netspace_mini_v2" diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt new file mode 100644 index 0000000000000000000000000000000000000000..06df04cc827a5eaba364f86f6800d1c0a84773d5 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt @@ -0,0 +1,84 @@ +QCOM Idle States for cpuidle driver + +ARM provides idle-state node to define the cpuidle states, as defined in [1]. +cpuidle-qcom is the cpuidle driver for Qualcomm SoCs and uses these idle +states. Idle states have different enter/exit latency and residency values. +The idle states supported by the QCOM SoC are defined as - + + * Standby + * Retention + * Standalone Power Collapse (Standalone PC or SPC) + * Power Collapse (PC) + +Standby: Standby does a little more in addition to architectural clock gating. +When the WFI instruction is executed the ARM core would gate its internal +clocks. In addition to gating the clocks, QCOM cpus use this instruction as a +trigger to execute the SPM state machine. The SPM state machine waits for the +interrupt to trigger the core back in to active. This triggers the cache +hierarchy to enter standby states, when all cpus are idle. An interrupt brings +the SPM state machine out of its wait, the next step is to ensure that the +cache hierarchy is also out of standby, and then the cpu is allowed to resume +execution. This state is defined as a generic ARM WFI state by the ARM cpuidle +driver and is not defined in the DT. The SPM state machine should be +configured to execute this state by default and after executing every other +state below. + +Retention: Retention is a low power state where the core is clock gated and +the memory and the registers associated with the core are retained. The +voltage may be reduced to the minimum value needed to keep the processor +registers active. The SPM should be configured to execute the retention +sequence and would wait for interrupt, before restoring the cpu to execution +state. Retention may have a slightly higher latency than Standby. + +Standalone PC: A cpu can power down and warmboot if there is a sufficient time +between the time it enters idle and the next known wake up. SPC mode is used +to indicate a core entering a power down state without consulting any other +cpu or the system resources. This helps save power only on that core. The SPM +sequence for this idle state is programmed to power down the supply to the +core, wait for the interrupt, restore power to the core, and ensure the +system state including cache hierarchy is ready before allowing core to +resume. Applying power and resetting the core causes the core to warmboot +back into Elevation Level (EL) which trampolines the control back to the +kernel. Entering a power down state for the cpu, needs to be done by trapping +into a EL. Failing to do so, would result in a crash enforced by the warm boot +code in the EL for the SoC. On SoCs with write-back L1 cache, the cache has to +be flushed in s/w, before powering down the core. + +Power Collapse: This state is similar to the SPC mode, but distinguishes +itself in that the cpu acknowledges and permits the SoC to enter deeper sleep +modes. In a hierarchical power domain SoC, this means L2 and other caches can +be flushed, system bus, clocks - lowered, and SoC main XO clock gated and +voltages reduced, provided all cpus enter this state. Since the span of low +power modes possible at this state is vast, the exit latency and the residency +of this low power mode would be considered high even though at a cpu level, +this essentially is cpu power down. The SPM in this state also may handshake +with the Resource power manager (RPM) processor in the SoC to indicate a +complete application processor subsystem shut down. + +The idle-state for QCOM SoCs are distinguished by the compatible property of +the idle-states device node. + +The devicetree representation of the idle state should be - + +Required properties: + +- compatible: Must be one of - + "qcom,idle-state-ret", + "qcom,idle-state-spc", + "qcom,idle-state-pc", + and "arm,idle-state". + +Other required and optional properties are specified in [1]. + +Example: + + idle-states { + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", "arm,idle-state"; + entry-latency-us = <150>; + exit-latency-us = <200>; + min-residency-us = <2000>; + }; + }; + +[1]. Documentation/devicetree/bindings/arm/idle-states.txt diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt index 1505fb8e131a889e4a62111c808cad57466f34bb..ae4afc6dcfe0a851a6264f50d633584f4f3a6cca 100644 --- a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt +++ b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt @@ -2,22 +2,31 @@ SPM AVS Wrapper 2 (SAW2) The SAW2 is a wrapper around the Subsystem Power Manager (SPM) and the Adaptive Voltage Scaling (AVS) hardware. The SPM is a programmable -micro-controller that transitions a piece of hardware (like a processor or +power-controller that transitions a piece of hardware (like a processor or subsystem) into and out of low power modes via a direct connection to the PMIC. It can also be wired up to interact with other processors in the system, notifying them when a low power state is entered or exited. +Multiple revisions of the SAW hardware are supported using these Device Nodes. +SAW2 revisions differ in the register offset and configuration data. Also, the +same revision of the SAW in different SoCs may have different configuration +data due the the differences in hardware capabilities. Hence the SoC name, the +version of the SAW hardware in that SoC and the distinction between cpu (big +or Little) or cache, may be needed to uniquely identify the SAW register +configuration and initialization data. The compatible string is used to +indicate this parameter. + PROPERTIES - compatible: Usage: required Value type: - Definition: shall contain "qcom,saw2". A more specific value should be - one of: - "qcom,saw2-v1" - "qcom,saw2-v1.1" - "qcom,saw2-v2" - "qcom,saw2-v2.1" + Definition: Must have + "qcom,saw2" + A more specific value could be one of: + "qcom,apq8064-saw2-v1.1-cpu" + "qcom,msm8974-saw2-v2.1-cpu" + "qcom,apq8084-saw2-v2.1-cpu" - reg: Usage: required @@ -26,10 +35,23 @@ PROPERTIES the register region. An optional second element specifies the base address and size of the alias register region. +- regulator: + Usage: optional + Value type: boolean + Definition: Indicates that this SPM device acts as a regulator device + device for the core (CPU or Cache) the SPM is attached + to. -Example: +Example 1: - regulator@2099000 { + power-controller@2099000 { compatible = "qcom,saw2"; reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + +Example 2: + saw0: power-controller@f9089000 { + compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>; }; diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt index 74607b6c111763cd4e3174da9bb62817f59fe79f..5e10c345548f56b18422c9995b6fe0bdaa33d7b0 100644 --- a/Documentation/devicetree/bindings/arm/msm/timer.txt +++ b/Documentation/devicetree/bindings/arm/msm/timer.txt @@ -9,11 +9,17 @@ Properties: "qcom,scss-timer" - scorpion subsystem - interrupts : Interrupts for the debug timer, the first general purpose - timer, and optionally a second general purpose timer in that - order. + timer, and optionally a second general purpose timer, and + optionally as well, 2 watchdog interrupts, in that order. - reg : Specifies the base address of the timer registers. +- clocks: Reference to the parent clocks, one per output clock. The parents + must appear in the same order as the clock names. + +- clock-names: The name of the clocks as free-form strings. They should be in + the same order as the clocks. + - clock-frequency : The frequency of the debug timer and the general purpose timer(s) in Hz in that order. @@ -29,9 +35,13 @@ Example: compatible = "qcom,scss-timer", "qcom,msm-timer"; interrupts = <1 1 0x301>, <1 2 0x301>, - <1 3 0x301>; + <1 3 0x301>, + <1 4 0x301>, + <1 5 0x301>; reg = <0x0200a000 0x100>; clock-frequency = <19200000>, <32768>; + clocks = <&sleep_clk>; + clock-names = "sleep"; cpu-offset = <0x40000>; }; diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt new file mode 100644 index 0000000000000000000000000000000000000000..3a4e5901ce31b0b8f12324f05951876fb4311c7d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt @@ -0,0 +1,79 @@ +OMAP Control Module bindings + +Control Module contains miscellaneous features under it based on SoC type. +Pincontrol is one common feature, and it has a specialized support +described in [1]. Typically some clock nodes are also under control module. +Syscon is used to share register level access to drivers external to +control module driver itself. + +See [2] for documentation about clock/clockdomain nodes. + +[1] Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt +[2] Documentation/devicetree/bindings/clock/ti/* + +Required properties: +- compatible: Must be one of: + "ti,am3-scm" + "ti,am4-scm" + "ti,dm814-scrm" + "ti,dm816-scrm" + "ti,omap2-scm" + "ti,omap3-scm" + "ti,omap4-scm-core" + "ti,omap4-scm-padconf-core" + "ti,omap5-scm-core" + "ti,omap5-scm-padconf-core" + "ti,dra7-scm-core" +- reg: Contains Control Module register address range + (base address and length) + +Optional properties: +- clocks: clocks for this module +- clockdomains: clockdomains for this module + +Examples: + +scm: scm@2000 { + compatible = "ti,omap3-scm", "simple-bus"; + reg = <0x2000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x2000>; + + omap3_pmx_core: pinmux@30 { + compatible = "ti,omap3-padconf", + "pinctrl-single"; + reg = <0x30 0x230>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xff1f>; + }; + + scm_conf: scm_conf@270 { + compatible = "syscon"; + reg = <0x270 0x330>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + scm_clockdomains: clockdomains { + }; +} + +&scm_clocks { + mcbsp5_mux_fck: mcbsp5_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&core_96m_fck>, <&mcbsp_clks>; + ti,bit-shift = <4>; + reg = <0x02d8>; + }; +}; diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt index 974624ea68f67d3f16df404bccb57f587ac8a82e..161448da959d26edeb19de7db2561564c4c473dc 100644 --- a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt +++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt @@ -6,6 +6,7 @@ provided by Arteris. Required properties: - compatible : Should be "ti,omap3-l3-smx" for OMAP3 family Should be "ti,omap4-l3-noc" for OMAP4 family + Should be "ti,omap5-l3-noc" for OMAP5 family Should be "ti,dra7-l3-noc" for DRA7 family Should be "ti,am4372-l3-noc" for AM43 family - reg: Contains L3 register address range for each noc domain. diff --git a/Documentation/devicetree/bindings/arm/omap/l4.txt b/Documentation/devicetree/bindings/arm/omap/l4.txt new file mode 100644 index 0000000000000000000000000000000000000000..b4f8a16e7e3b35a746894fc12633893b7741da3c --- /dev/null +++ b/Documentation/devicetree/bindings/arm/omap/l4.txt @@ -0,0 +1,26 @@ +L4 interconnect bindings + +These bindings describe the OMAP SoCs L4 interconnect bus. + +Required properties: +- compatible : Should be "ti,omap2-l4" for OMAP2 family l4 core bus + Should be "ti,omap2-l4-wkup" for OMAP2 family l4 wkup bus + Should be "ti,omap3-l4-core" for OMAP3 family l4 core bus + Should be "ti,omap4-l4-cfg" for OMAP4 family l4 cfg bus + Should be "ti,omap4-l4-wkup" for OMAP4 family l4 wkup bus + Should be "ti,omap5-l4-cfg" for OMAP5 family l4 cfg bus + Should be "ti,omap5-l4-wkup" for OMAP5 family l4 wkup bus + Should be "ti,dra7-l4-cfg" for DRA7 family l4 cfg bus + Should be "ti,dra7-l4-wkup" for DRA7 family l4 wkup bus + Should be "ti,am3-l4-wkup" for AM33xx family l4 wkup bus + Should be "ti,am4-l4-wkup" for AM43xx family l4 wkup bus +- ranges : contains the IO map range for the bus + +Examples: + +l4: l4@48000000 { + compatible "ti,omap2-l4", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48000000 0x100000>; +}; diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt index 79074dac684abfd6eec2239ef2a128955cd1641f..3eb6d7afff14395229b36e349f13c52e87a96be8 100644 --- a/Documentation/devicetree/bindings/arm/omap/prcm.txt +++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt @@ -10,14 +10,10 @@ documentation about the individual clock/clockdomain nodes. Required properties: - compatible: Must be one of: "ti,am3-prcm" - "ti,am3-scrm" "ti,am4-prcm" - "ti,am4-scrm" "ti,omap2-prcm" - "ti,omap2-scrm" "ti,omap3-prm" "ti,omap3-cm" - "ti,omap3-scrm" "ti,omap4-cm1" "ti,omap4-prm" "ti,omap4-cm2" @@ -29,6 +25,8 @@ Required properties: "ti,dra7-prm" "ti,dra7-cm-core-aon" "ti,dra7-cm-core" + "ti,dm814-prcm" + "ti,dm816-prcm" - reg: Contains PRCM module register address range (base address and length) - clocks: clocks for this module diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt index 75ef91d08f3bd2cbc402326598ead0e34663e790..3b5f5d1088c6399f0fa8145717134cf2a96d08ba 100644 --- a/Documentation/devicetree/bindings/arm/pmu.txt +++ b/Documentation/devicetree/bindings/arm/pmu.txt @@ -18,12 +18,21 @@ Required properties: "arm,arm11mpcore-pmu" "arm,arm1176-pmu" "arm,arm1136-pmu" + "qcom,scorpion-pmu" + "qcom,scorpion-mp-pmu" "qcom,krait-pmu" - interrupts : 1 combined interrupt or 1 per core. If the interrupt is a per-cpu interrupt (PPI) then 1 interrupt should be specified. Optional properties: +- interrupt-affinity : Valid only when using SPIs, specifies a list of phandles + to CPU nodes corresponding directly to the affinity of + the SPIs listed in the interrupts property. + + This property should be present when there is more than + a single SPI. + - qcom,no-pc-write : Indicates that this PMU doesn't support the 0xc and 0xd events. diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index 6809e4e51ed29bc6eda1a772b91d576aeb0cfeb0..60d4a1e0a9b589011b956ad674bb7955dbf2f19b 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -22,3 +22,7 @@ Rockchip platforms device tree bindings - compatible = "firefly,firefly-rk3288", "rockchip,rk3288"; or - compatible = "firefly,firefly-rk3288-beta", "rockchip,rk3288"; + +- ChipSPARK PopMetal-RK3288 board: + Required root node properties: + - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288"; diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index 51147cb5c036599a0741a5cc2172f0f21d07ad39..c4f19b2e7dd95c1022a43ebe2b764a6c58f26062 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -7,8 +7,6 @@ SoCs: compatible = "renesas,emev2" - RZ/A1H (R7S72100) compatible = "renesas,r7s72100" - - SH-Mobile AP4 (R8A73720/SH7372) - compatible = "renesas,sh7372" - SH-Mobile AG5 (R8A73A00/SH73A0) compatible = "renesas,sh73a0" - R-Mobile APE6 (R8A73A40) @@ -37,8 +35,6 @@ Boards: compatible = "renesas,alt", "renesas,r8a7794" - APE6-EVM compatible = "renesas,ape6evm", "renesas,r8a73a4" - - APE6-EVM - Reference Device Tree Implementation - compatible = "renesas,ape6evm-reference", "renesas,r8a73a4" - Atmark Techno Armadillo-800 EVA compatible = "renesas,armadillo800eva" - BOCK-W @@ -57,12 +53,8 @@ Boards: compatible = "renesas,kzm9d", "renesas,emev2" - Kyoto Microcomputer Co. KZM-A9-GT compatible = "renesas,kzm9g", "renesas,sh73a0" - - Kyoto Microcomputer Co. KZM-A9-GT - Reference Device Tree Implementation - compatible = "renesas,kzm9g-reference", "renesas,sh73a0" - Lager (RTP0RC7790SEB00010S) compatible = "renesas,lager", "renesas,r8a7790" - - Mackerel (R0P7372LC0016RL, AP4 EVM 2nd) - compatible = "renesas,mackerel" - Marzen compatible = "renesas,marzen", "renesas,r8a7779" diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt index 067c9790062f7e1ab42aa1835e095ca076babbe4..9a4295b545395bb3673299e68d08cfad2a09365e 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt @@ -5,9 +5,12 @@ Required properties: Tegra30, must contain "nvidia,tegra30-ahb". Otherwise, must contain '"nvidia,-ahb", "nvidia,tegra30-ahb"' where is tegra124, tegra132, or tegra210. -- reg : Should contain 1 register ranges(address and length) +- reg : Should contain 1 register ranges(address and length). For + Tegra20, Tegra30, and Tegra114 chips, the value must be <0x6000c004 + 0x10c>. For Tegra124, Tegra132 and Tegra210 chips, the value should + be be <0x6000c000 0x150>. -Example: +Example (for a Tegra20 chip): ahb: ahb@6000c004 { compatible = "nvidia,tegra20-ahb"; reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */ diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt new file mode 100644 index 0000000000000000000000000000000000000000..ea670a5d7ee3e8cd67af0987695e830187ed3b65 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt @@ -0,0 +1,32 @@ +NVIDIA Tegra Activity Monitor + +The activity monitor block collects statistics about the behaviour of other +components in the system. This information can be used to derive the rate at +which the external memory needs to be clocked in order to serve all requests +from the monitored clients. + +Required properties: +- compatible: should be "nvidia,tegra-actmon" +- reg: offset and length of the register set for the device +- interrupts: standard interrupt property +- clocks: Must contain a phandle and clock specifier pair for each entry in +clock-names. See ../../clock/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - actmon + - emc +- resets: Must contain an entry for each entry in reset-names. See +../../reset/reset.txt for details. +- reset-names: Must include the following entries: + - actmon + +Example: + actmon@6000c800 { + compatible = "nvidia,tegra124-actmon"; + reg = <0x0 0x6000c800 0x0 0x400>; + interrupts = ; + clocks = <&tegra_car TEGRA124_CLK_ACTMON>, + <&tegra_car TEGRA124_CLK_EMC>; + clock-names = "actmon", "emc"; + resets = <&tegra_car 119>; + reset-names = "actmon"; + }; diff --git a/Documentation/devicetree/bindings/bus/bcma.txt b/Documentation/devicetree/bindings/bus/brcm,bus-axi.txt similarity index 100% rename from Documentation/devicetree/bindings/bus/bcma.txt rename to Documentation/devicetree/bindings/bus/brcm,bus-axi.txt diff --git a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt index 63dd8051521c32d3674db1044ab75d01535ee074..18729f6fe1e5fbc5dea3e36c98715b4c22e4315f 100644 --- a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt +++ b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt @@ -1,7 +1,8 @@ * OMAP OCP2SCP - ocp interface to scp interface properties: -- compatible : Should be "ti,omap-ocp2scp" +- compatible : Should be "ti,am437x-ocp2scp" for AM437x processor + Should be "ti,omap-ocp2scp" for all others - reg : Address and length of the register set for the device - #address-cells, #size-cells : Must be present if the device has sub-nodes - ranges : the child address space are mapped 1:1 onto the parent address space diff --git a/Documentation/devicetree/bindings/bus/renesas,bsc.txt b/Documentation/devicetree/bindings/bus/renesas,bsc.txt new file mode 100644 index 0000000000000000000000000000000000000000..90e94726943772c495942e39ebe86decf1d4d7f1 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/renesas,bsc.txt @@ -0,0 +1,46 @@ +Renesas Bus State Controller (BSC) +================================== + +The Renesas Bus State Controller (BSC, sometimes called "LBSC within Bus +Bridge", or "External Bus Interface") can be found in several Renesas ARM SoCs. +It provides an external bus for connecting multiple external devices to the +SoC, driving several chip select lines, for e.g. NOR FLASH, Ethernet and USB. + +While the BSC is a fairly simple memory-mapped bus, it may be part of a PM +domain, and may have a gateable functional clock. +Before a device connected to the BSC can be accessed, the PM domain +containing the BSC must be powered on, and the functional clock +driving the BSC must be enabled. + +The bindings for the BSC extend the bindings for "simple-pm-bus". + + +Required properties + - compatible: Must contain an SoC-specific value, and "renesas,bsc" and + "simple-pm-bus" as fallbacks. + SoC-specific values can be: + "renesas,bsc-r8a73a4" for R-Mobile APE6 (r8a73a4) + "renesas,bsc-sh73a0" for SH-Mobile AG5 (sh73a0) + - #address-cells, #size-cells, ranges: Must describe the mapping between + parent address and child address spaces. + - reg: Must contain the base address and length to access the bus controller. + +Optional properties: + - interrupts: Must contain a reference to the BSC interrupt, if available. + - clocks: Must contain a reference to the functional clock, if available. + - power-domains: Must contain a reference to the PM domain, if available. + + +Example: + + bsc: bus@fec10000 { + compatible = "renesas,bsc-sh73a0", "renesas,bsc", + "simple-pm-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x20000000>; + reg = <0xfec10000 0x400>; + interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&zb_clk>; + power-domains = <&pd_a4s>; + }; diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.txt b/Documentation/devicetree/bindings/bus/simple-pm-bus.txt new file mode 100644 index 0000000000000000000000000000000000000000..d032237512c271f29da4d321d64605d6806e5c13 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/simple-pm-bus.txt @@ -0,0 +1,44 @@ +Simple Power-Managed Bus +======================== + +A Simple Power-Managed Bus is a transparent bus that doesn't need a real +driver, as it's typically initialized by the boot loader. + +However, its bus controller is part of a PM domain, or under the control of a +functional clock. Hence, the bus controller's PM domain and/or clock must be +enabled for child devices connected to the bus (either on-SoC or externally) +to function. + +While "simple-pm-bus" follows the "simple-bus" set of properties, as specified +in ePAPR, it is not an extension of "simple-bus". + + +Required properties: + - compatible: Must contain at least "simple-pm-bus". + Must not contain "simple-bus". + It's recommended to let this be preceded by one or more + vendor-specific compatible values. + - #address-cells, #size-cells, ranges: Must describe the mapping between + parent address and child address spaces. + +Optional platform-specific properties for clock or PM domain control (at least +one of them is required): + - clocks: Must contain a reference to the functional clock(s), + - power-domains: Must contain a reference to the PM domain. +Please refer to the binding documentation for the clock and/or PM domain +providers for more details. + + +Example: + + bsc: bus@fec10000 { + compatible = "renesas,bsc-sh73a0", "renesas,bsc", + "simple-pm-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x20000000>; + reg = <0xfec10000 0x400>; + interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&zb_clk>; + power-domains = <&pd_a4s>; + }; diff --git a/Documentation/devicetree/bindings/clock/bcm-kona-clock.txt b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt similarity index 100% rename from Documentation/devicetree/bindings/clock/bcm-kona-clock.txt rename to Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt diff --git a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt index f57d9dd9ea8530ae9c8d02723b1bc15d38002497..f1738b88c22596afe1a49edb114bcdc31e3f9475 100644 --- a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt @@ -9,6 +9,8 @@ Required Properties: - "samsung,exynos3250-cmu" - controller compatible with Exynos3250 SoC. - "samsung,exynos3250-cmu-dmc" - controller compatible with Exynos3250 SoC for Dynamic Memory Controller domain. + - "samsung,exynos3250-cmu-isp" - ISP block clock controller compatible + with Exynos3250 SOC - reg: physical base address of the controller and length of memory mapped region. @@ -36,6 +38,12 @@ Example 1: Examples of clock controller nodes are listed below. #clock-cells = <1>; }; + cmu_isp: clock-controller@10048000 { + compatible = "samsung,exynos3250-cmu-isp"; + reg = <0x10048000 0x1000>; + #clock-cells = <1>; + }; + Example 2: UART controller node that consumes the clock generated by the clock controller. Refer to the standard clock bindings for information about 'clocks' and 'clock-names' property. diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt new file mode 100644 index 0000000000000000000000000000000000000000..63379b04e05224331cf7abf4d7948c8848287e41 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt @@ -0,0 +1,462 @@ +* Samsung Exynos5433 CMU (Clock Management Units) + +The Exynos5433 clock controller generates and supplies clock to various +controllers within the Exynos5433 SoC. + +Required Properties: + +- compatible: should be one of the following. + - "samsung,exynos5433-cmu-top" - clock controller compatible for CMU_TOP + which generates clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS + domains and bus clocks. + - "samsung,exynos5433-cmu-cpif" - clock controller compatible for CMU_CPIF + which generates clocks for LLI (Low Latency Interface) IP. + - "samsung,exynos5433-cmu-mif" - clock controller compatible for CMU_MIF + which generates clocks for DRAM Memory Controller domain. + - "samsung,exynos5433-cmu-peric" - clock controller compatible for CMU_PERIC + which generates clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs. + - "samsung,exynos5433-cmu-peris" - clock controller compatible for CMU_PERIS + which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs. + - "samsung,exynos5433-cmu-fsys" - clock controller compatible for CMU_FSYS + which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs. + - "samsung,exynos5433-cmu-g2d" - clock controller compatible for CMU_G2D + which generates clocks for G2D/MDMA IPs. + - "samsung,exynos5433-cmu-disp" - clock controller compatible for CMU_DISP + which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs. + - "samsung,exynos5433-cmu-aud" - clock controller compatible for CMU_AUD + which generates clocks for Cortex-A5/BUS/AUDIO clocks. + - "samsung,exynos5433-cmu-bus0", "samsung,exynos5433-cmu-bus1" + and "samsung,exynos5433-cmu-bus2" - clock controller compatible for CMU_BUS + which generates global data buses clock and global peripheral buses clock. + - "samsung,exynos5433-cmu-g3d" - clock controller compatible for CMU_G3D + which generates clocks for 3D Graphics Engine IP. + - "samsung,exynos5433-cmu-gscl" - clock controller compatible for CMU_GSCL + which generates clocks for GSCALER IPs. + - "samsung,exynos5433-cmu-apollo"- clock controller compatible for CMU_APOLLO + which generates clocks for Cortex-A53 Quad-core processor. + - "samsung,exynos5433-cmu-atlas" - clock controller compatible for CMU_ATLAS + which generates clocks for Cortex-A57 Quad-core processor, CoreSight and + L2 cache controller. + - "samsung,exynos5433-cmu-mscl" - clock controller compatible for CMU_MSCL + which generates clocks for M2M (Memory to Memory) scaler and JPEG IPs. + - "samsung,exynos5433-cmu-mfc" - clock controller compatible for CMU_MFC + which generates clocks for MFC(Multi-Format Codec) IP. + - "samsung,exynos5433-cmu-hevc" - clock controller compatible for CMU_HEVC + which generates clocks for HEVC(High Efficiency Video Codec) decoder IP. + - "samsung,exynos5433-cmu-isp" - clock controller compatible for CMU_ISP + which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs. + - "samsung,exynos5433-cmu-cam0" - clock controller compatible for CMU_CAM0 + which generates clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} + IPs. + - "samsung,exynos5433-cmu-cam1" - clock controller compatible for CMU_CAM1 + which generates clocks for Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs. + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +- clocks: list of the clock controller input clock identifiers, + from common clock bindings. Please refer the next section + to find the input clocks for a given controller. + +- clock-names: list of the clock controller input clock names, + as described in clock-bindings.txt. + + Input clocks for top clock controller: + - oscclk + - sclk_mphy_pll + - sclk_mfc_pll + - sclk_bus_pll + + Input clocks for cpif clock controller: + - oscclk + + Input clocks for mif clock controller: + - oscclk + - sclk_mphy_pll + + Input clocks for fsys clock controller: + - oscclk + - sclk_ufs_mphy + - div_aclk_fsys_200 + - sclk_pcie_100_fsys + - sclk_ufsunipro_fsys + - sclk_mmc2_fsys + - sclk_mmc1_fsys + - sclk_mmc0_fsys + - sclk_usbhost30_fsys + - sclk_usbdrd30_fsys + + Input clocks for g2d clock controller: + - oscclk + - aclk_g2d_266 + - aclk_g2d_400 + + Input clocks for disp clock controller: + - oscclk + - sclk_dsim1_disp + - sclk_dsim0_disp + - sclk_dsd_disp + - sclk_decon_tv_eclk_disp + - sclk_decon_vclk_disp + - sclk_decon_eclk_disp + - sclk_decon_tv_vclk_disp + - aclk_disp_333 + + Input clocks for bus0 clock controller: + - aclk_bus0_400 + + Input clocks for bus1 clock controller: + - aclk_bus1_400 + + Input clocks for bus2 clock controller: + - oscclk + - aclk_bus2_400 + + Input clocks for g3d clock controller: + - oscclk + - aclk_g3d_400 + + Input clocks for gscl clock controller: + - oscclk + - aclk_gscl_111 + - aclk_gscl_333 + + Input clocks for apollo clock controller: + - oscclk + - sclk_bus_pll_apollo + + Input clocks for atlas clock controller: + - oscclk + - sclk_bus_pll_atlas + + Input clocks for mscl clock controller: + - oscclk + - sclk_jpeg_mscl + - aclk_mscl_400 + + Input clocks for mfc clock controller: + - oscclk + - aclk_mfc_400 + + Input clocks for hevc clock controller: + - oscclk + - aclk_hevc_400 + + Input clocks for isp clock controller: + - oscclk + - aclk_isp_dis_400 + - aclk_isp_400 + + Input clocks for cam0 clock controller: + - oscclk + - aclk_cam0_333 + - aclk_cam0_400 + - aclk_cam0_552 + + Input clocks for cam1 clock controller: + - oscclk + - sclk_isp_uart_cam1 + - sclk_isp_spi1_cam1 + - sclk_isp_spi0_cam1 + - aclk_cam1_333 + - aclk_cam1_400 + - aclk_cam1_552 + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/exynos5433.h header and can be used in device +tree sources. + +Example 1: Examples of 'oscclk' source clock node are listed below. + + xxti: xxti { + compatible = "fixed-clock"; + clock-output-names = "oscclk"; + #clock-cells = <0>; + }; + +Example 2: Examples of clock controller nodes are listed below. + + cmu_top: clock-controller@10030000 { + compatible = "samsung,exynos5433-cmu-top"; + reg = <0x10030000 0x0c04>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_mphy_pll", + "sclk_mfc_pll", + "sclk_bus_pll"; + clocks = <&xxti>, + <&cmu_cpif CLK_SCLK_MPHY_PLL>, + <&cmu_mif CLK_SCLK_MFC_PLL>, + <&cmu_mif CLK_SCLK_BUS_PLL>; + }; + + cmu_cpif: clock-controller@10fc0000 { + compatible = "samsung,exynos5433-cmu-cpif"; + reg = <0x10fc0000 0x0c04>; + #clock-cells = <1>; + + clock-names = "oscclk"; + clocks = <&xxti>; + }; + + cmu_mif: clock-controller@105b0000 { + compatible = "samsung,exynos5433-cmu-mif"; + reg = <0x105b0000 0x100c>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_mphy_pll"; + clocks = <&xxti>, + <&cmu_cpif CLK_SCLK_MPHY_PLL>; + }; + + cmu_peric: clock-controller@14c80000 { + compatible = "samsung,exynos5433-cmu-peric"; + reg = <0x14c80000 0x0b08>; + #clock-cells = <1>; + }; + + cmu_peris: clock-controller@10040000 { + compatible = "samsung,exynos5433-cmu-peris"; + reg = <0x10040000 0x0b20>; + #clock-cells = <1>; + }; + + cmu_fsys: clock-controller@156e0000 { + compatible = "samsung,exynos5433-cmu-fsys"; + reg = <0x156e0000 0x0b04>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_ufs_mphy", + "div_aclk_fsys_200", + "sclk_pcie_100_fsys", + "sclk_ufsunipro_fsys", + "sclk_mmc2_fsys", + "sclk_mmc1_fsys", + "sclk_mmc0_fsys", + "sclk_usbhost30_fsys", + "sclk_usbdrd30_fsys"; + clocks = <&xxti>, + <&cmu_cpif CLK_SCLK_UFS_MPHY>, + <&cmu_top CLK_DIV_ACLK_FSYS_200>, + <&cmu_top CLK_SCLK_PCIE_100_FSYS>, + <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>, + <&cmu_top CLK_SCLK_MMC2_FSYS>, + <&cmu_top CLK_SCLK_MMC1_FSYS>, + <&cmu_top CLK_SCLK_MMC0_FSYS>, + <&cmu_top CLK_SCLK_USBHOST30_FSYS>, + <&cmu_top CLK_SCLK_USBDRD30_FSYS>; + }; + + cmu_g2d: clock-controller@12460000 { + compatible = "samsung,exynos5433-cmu-g2d"; + reg = <0x12460000 0x0b08>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_g2d_266", + "aclk_g2d_400"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_G2D_266>, + <&cmu_top CLK_ACLK_G2D_400>; + }; + + cmu_disp: clock-controller@13b90000 { + compatible = "samsung,exynos5433-cmu-disp"; + reg = <0x13b90000 0x0c04>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_dsim1_disp", + "sclk_dsim0_disp", + "sclk_dsd_disp", + "sclk_decon_tv_eclk_disp", + "sclk_decon_vclk_disp", + "sclk_decon_eclk_disp", + "sclk_decon_tv_vclk_disp", + "aclk_disp_333"; + clocks = <&xxti>, + <&cmu_mif CLK_SCLK_DSIM1_DISP>, + <&cmu_mif CLK_SCLK_DSIM0_DISP>, + <&cmu_mif CLK_SCLK_DSD_DISP>, + <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>, + <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>, + <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, + <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, + <&cmu_mif CLK_ACLK_DISP_333>; + }; + + cmu_aud: clock-controller@114c0000 { + compatible = "samsung,exynos5433-cmu-aud"; + reg = <0x114c0000 0x0b04>; + #clock-cells = <1>; + }; + + cmu_bus0: clock-controller@13600000 { + compatible = "samsung,exynos5433-cmu-bus0"; + reg = <0x13600000 0x0b04>; + #clock-cells = <1>; + + clock-names = "aclk_bus0_400"; + clocks = <&cmu_top CLK_ACLK_BUS0_400>; + }; + + cmu_bus1: clock-controller@14800000 { + compatible = "samsung,exynos5433-cmu-bus1"; + reg = <0x14800000 0x0b04>; + #clock-cells = <1>; + + clock-names = "aclk_bus1_400"; + clocks = <&cmu_top CLK_ACLK_BUS1_400>; + }; + + cmu_bus2: clock-controller@13400000 { + compatible = "samsung,exynos5433-cmu-bus2"; + reg = <0x13400000 0x0b04>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_bus2_400"; + clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>; + }; + + cmu_g3d: clock-controller@14aa0000 { + compatible = "samsung,exynos5433-cmu-g3d"; + reg = <0x14aa0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_g3d_400"; + clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; + }; + + cmu_gscl: clock-controller@13cf0000 { + compatible = "samsung,exynos5433-cmu-gscl"; + reg = <0x13cf0000 0x0b10>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_gscl_111", + "aclk_gscl_333"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_GSCL_111>, + <&cmu_top CLK_ACLK_GSCL_333>; + }; + + cmu_apollo: clock-controller@11900000 { + compatible = "samsung,exynos5433-cmu-apollo"; + reg = <0x11900000 0x1088>; + #clock-cells = <1>; + + clock-names = "oscclk", "sclk_bus_pll_apollo"; + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>; + }; + + cmu_atlas: clock-controller@11800000 { + compatible = "samsung,exynos5433-cmu-atlas"; + reg = <0x11800000 0x1088>; + #clock-cells = <1>; + + clock-names = "oscclk", "sclk_bus_pll_atlas"; + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>; + }; + + cmu_mscl: clock-controller@105d0000 { + compatible = "samsung,exynos5433-cmu-mscl"; + reg = <0x105d0000 0x0b10>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_jpeg_mscl", + "aclk_mscl_400"; + clocks = <&xxti>, + <&cmu_top CLK_SCLK_JPEG_MSCL>, + <&cmu_top CLK_ACLK_MSCL_400>; + }; + + cmu_mfc: clock-controller@15280000 { + compatible = "samsung,exynos5433-cmu-mfc"; + reg = <0x15280000 0x0b08>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_mfc_400"; + clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; + }; + + cmu_hevc: clock-controller@14f80000 { + compatible = "samsung,exynos5433-cmu-hevc"; + reg = <0x14f80000 0x0b08>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_hevc_400"; + clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; + }; + + cmu_isp: clock-controller@146d0000 { + compatible = "samsung,exynos5433-cmu-isp"; + reg = <0x146d0000 0x0b0c>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_isp_dis_400", + "aclk_isp_400"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_ISP_DIS_400>, + <&cmu_top CLK_ACLK_ISP_400>; + }; + + cmu_cam0: clock-controller@120d0000 { + compatible = "samsung,exynos5433-cmu-cam0"; + reg = <0x120d0000 0x0b0c>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_cam0_333", + "aclk_cam0_400", + "aclk_cam0_552"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_CAM0_333>, + <&cmu_top CLK_ACLK_CAM0_400>, + <&cmu_top CLK_ACLK_CAM0_552>; + }; + + cmu_cam1: clock-controller@145d0000 { + compatible = "samsung,exynos5433-cmu-cam1"; + reg = <0x145d0000 0x0b08>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_isp_uart_cam1", + "sclk_isp_spi1_cam1", + "sclk_isp_spi0_cam1", + "aclk_cam1_333", + "aclk_cam1_400", + "aclk_cam1_552"; + clocks = <&xxti>, + <&cmu_top CLK_SCLK_ISP_UART_CAM1>, + <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>, + <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>, + <&cmu_top CLK_ACLK_CAM1_333>, + <&cmu_top CLK_ACLK_CAM1_400>, + <&cmu_top CLK_ACLK_CAM1_552>; + }; + +Example 3: UART controller node that consumes the clock generated by the clock + controller. + + serial_0: serial@14C10000 { + compatible = "samsung,exynos5433-uart"; + reg = <0x14C10000 0x100>; + interrupts = <0 421 0>; + clocks = <&cmu_peric CLK_PCLK_UART0>, + <&cmu_peric CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_bus>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt b/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt new file mode 100644 index 0000000000000000000000000000000000000000..33239626568920bb92f10efd6754fd4c3d7b7675 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt @@ -0,0 +1,26 @@ +Fujitsu CRG11 clock driver bindings +----------------------------------- + +Required properties : +- compatible : Shall contain "fujitsu,mb86s70-crg11" +- #clock-cells : Shall be 3 {cntrlr domain port} + +The consumer specifies the desired clock pointing to its phandle. + +Example: + + clock: crg11 { + compatible = "fujitsu,mb86s70-crg11"; + #clock-cells = <3>; + }; + + mhu: mhu0@2b1f0000 { + #mbox-cells = <1>; + compatible = "arm,mhu"; + reg = <0 0x2B1F0000 0x1000>; + interrupts = <0 36 4>, /* LP Non-Sec */ + <0 35 4>, /* HP Non-Sec */ + <0 37 4>; /* Secure */ + clocks = <&clock 0 2 1>; /* Cntrlr:0 Domain:2 Port:1 */ + clock-names = "clk"; + }; diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt index dc5ea5b22da90dbf43f0d5e15b28141d3c7e0e4d..670c2af3e931a779adbe3bbdd06674181e82cf8d 100644 --- a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt +++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt @@ -23,6 +23,14 @@ The following is a list of provided IDs and clock names on Armada 380/385: 2 = l2clk (L2 Cache clock) 3 = ddrclk (DDR clock) +The following is a list of provided IDs and clock names on Armada 39x: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU clock) + 2 = nbclk (Coherent Fabric clock) + 3 = hclk (SDRAM Controller Internal Clock) + 4 = dclk (SDRAM Interface Clock) + 5 = refclk (Reference Clock) + The following is a list of provided IDs and clock names on Kirkwood and Dove: 0 = tclk (Internal Bus clock) 1 = cpuclk (CPU0 clock) @@ -39,6 +47,7 @@ Required properties: "marvell,armada-370-core-clock" - For Armada 370 SoC core clocks "marvell,armada-375-core-clock" - For Armada 375 SoC core clocks "marvell,armada-380-core-clock" - For Armada 380/385 SoC core clocks + "marvell,armada-390-core-clock" - For Armada 39x SoC core clocks "marvell,armada-xp-core-clock" - For Armada XP SoC core clocks "marvell,dove-core-clock" - for Dove SoC core clocks "marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180) diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt index 76477be742b21c016e06d59f2a67c28b9ffdabf0..31c7c0c1ce8f6b47a625f8b6f41eafc6a35d402a 100644 --- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt +++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt @@ -1,6 +1,6 @@ * Gated Clock bindings for Marvell EBU SoCs -Marvell Armada 370/375/380/385/XP, Dove and Kirkwood allow some +Marvell Armada 370/375/380/385/39x/XP, Dove and Kirkwood allow some peripheral clocks to be gated to save some power. The clock consumer should specify the desired clock by having the clock ID in its "clocks" phandle cell. The clock ID is directly mapped to the @@ -77,6 +77,18 @@ ID Clock Peripheral 28 xor1 XOR 1 30 sata1 SATA 1 +The following is a list of provided IDs for Armada 39x: +ID Clock Peripheral +----------------------------------- +5 pex1 PCIe 1 +6 pex2 PCIe 2 +7 pex3 PCIe 3 +8 pex0 PCIe 0 +9 usb3h0 USB3 Host 0 +17 sdio SDIO +22 xor0 XOR 0 +28 xor1 XOR 1 + The following is a list of provided IDs for Armada XP: ID Clock Peripheral ----------------------------------- @@ -152,6 +164,7 @@ Required properties: "marvell,armada-370-gating-clock" - for Armada 370 SoC clock gating "marvell,armada-375-gating-clock" - for Armada 375 SoC clock gating "marvell,armada-380-gating-clock" - for Armada 380/385 SoC clock gating + "marvell,armada-390-gating-clock" - for Armada 39x SoC clock gating "marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating "marvell,dove-gating-clock" - for Dove SoC clock gating "marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating diff --git a/Documentation/devicetree/bindings/clock/pistachio-clock.txt b/Documentation/devicetree/bindings/clock/pistachio-clock.txt new file mode 100644 index 0000000000000000000000000000000000000000..868db499eed2da4f3a1fad0530cc6b00080f0af1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/pistachio-clock.txt @@ -0,0 +1,123 @@ +Imagination Technologies Pistachio SoC clock controllers +======================================================== + +Pistachio has four clock controllers (core clock, peripheral clock, peripheral +general control, and top general control) which are instantiated individually +from the device-tree. + +External clocks: +---------------- + +There are three external inputs to the clock controllers which should be +defined with the following clock-output-names: +- "xtal": External 52Mhz oscillator (required) +- "audio_clk_in": Alternate audio reference clock (optional) +- "enet_clk_in": Alternate ethernet PHY clock (optional) + +Core clock controller: +---------------------- + +The core clock controller generates clocks for the CPU, RPU (WiFi + BT +co-processor), audio, and several peripherals. + +Required properties: +- compatible: Must be "img,pistachio-clk". +- reg: Must contain the base address and length of the core clock controller. +- #clock-cells: Must be 1. The single cell is the clock identifier. + See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers. +- clocks: Must contain an entry for each clock in clock-names. +- clock-names: Must include "xtal" (see "External clocks") and + "audio_clk_in_gate", "enet_clk_in_gate" which are generated by the + top-level general control. + +Example: + clk_core: clock-controller@18144000 { + compatible = "img,pistachio-clk"; + reg = <0x18144000 0x800>; + clocks = <&xtal>, <&cr_top EXT_CLK_AUDIO_IN>, + <&cr_top EXT_CLK_ENET_IN>; + clock-names = "xtal", "audio_clk_in_gate", "enet_clk_in_gate"; + + #clock-cells = <1>; + }; + +Peripheral clock controller: +---------------------------- + +The peripheral clock controller generates clocks for the DDR, ROM, and other +peripherals. The peripheral system clock ("periph_sys") generated by the core +clock controller is the input clock to the peripheral clock controller. + +Required properties: +- compatible: Must be "img,pistachio-periph-clk". +- reg: Must contain the base address and length of the peripheral clock + controller. +- #clock-cells: Must be 1. The single cell is the clock identifier. + See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers. +- clocks: Must contain an entry for each clock in clock-names. +- clock-names: Must include "periph_sys", the peripheral system clock generated + by the core clock controller. + +Example: + clk_periph: clock-controller@18144800 { + compatible = "img,pistachio-clk-periph"; + reg = <0x18144800 0x800>; + clocks = <&clk_core CLK_PERIPH_SYS>; + clock-names = "periph_sys"; + + #clock-cells = <1>; + }; + +Peripheral general control: +--------------------------- + +The peripheral general control block generates system interface clocks and +resets for various peripherals. It also contains miscellaneous peripheral +control registers. The system clock ("sys") generated by the peripheral clock +controller is the input clock to the system clock controller. + +Required properties: +- compatible: Must include "img,pistachio-periph-cr" and "syscon". +- reg: Must contain the base address and length of the peripheral general + control registers. +- #clock-cells: Must be 1. The single cell is the clock identifier. + See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers. +- clocks: Must contain an entry for each clock in clock-names. +- clock-names: Must include "sys", the system clock generated by the peripheral + clock controller. + +Example: + cr_periph: syscon@18144800 { + compatible = "img,pistachio-cr-periph", "syscon"; + reg = <0x18148000 0x1000>; + clocks = <&clock_periph PERIPH_CLK_PERIPH_SYS>; + clock-names = "sys"; + + #clock-cells = <1>; + }; + +Top-level general control: +-------------------------- + +The top-level general control block contains miscellaneous control registers and +gates for the external clocks "audio_clk_in" and "enet_clk_in". + +Required properties: +- compatible: Must include "img,pistachio-cr-top" and "syscon". +- reg: Must contain the base address and length of the top-level + control registers. +- clocks: Must contain an entry for each clock in clock-names. +- clock-names: Two optional clocks, "audio_clk_in" and "enet_clk_in" (see + "External clocks"). +- #clock-cells: Must be 1. The single cell is the clock identifier. + See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers. + +Example: + cr_top: syscon@18144800 { + compatible = "img,pistachio-cr-top", "syscon"; + reg = <0x18149000 0x200>; + clocks = <&audio_refclk>, <&ext_enet_in>; + clock-names = "audio_clk_in", "enet_clk_in"; + + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/pwm-clock.txt b/Documentation/devicetree/bindings/clock/pwm-clock.txt new file mode 100644 index 0000000000000000000000000000000000000000..83db876b3b9071a30faa981ec3ffb8c50b5867d0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/pwm-clock.txt @@ -0,0 +1,26 @@ +Binding for an external clock signal driven by a PWM pin. + +This binding uses the common clock binding[1] and the common PWM binding[2]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/pwm/pwm.txt + +Required properties: +- compatible : shall be "pwm-clock". +- #clock-cells : from common clock binding; shall be set to 0. +- pwms : from common PWM binding; this determines the clock frequency + via the period given in the PWM specifier. + +Optional properties: +- clock-output-names : From common clock binding. +- clock-frequency : Exact output frequency, in case the PWM period + is not exact but was rounded to nanoseconds. + +Example: + clock { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "mipi_mclk"; + pwms = <&pwm2 0 40>; /* 1 / 40 ns = 25 MHz */ + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt index aba3d254e037902b540e0801c2294656a08d22b6..54c23f34f194608c34c01f1ecb6ae9be58e11704 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt @@ -8,6 +8,7 @@ Required properties : "qcom,gcc-apq8084" "qcom,gcc-ipq8064" "qcom,gcc-msm8660" + "qcom,gcc-msm8916" "qcom,gcc-msm8960" "qcom,gcc-msm8974" "qcom,gcc-msm8974pro" diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt new file mode 100644 index 0000000000000000000000000000000000000000..2f3747fdcf1c53057be743af116a35d0f91833d6 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt @@ -0,0 +1,25 @@ +* Renesas R8A7778 Clock Pulse Generator (CPG) + +The CPG generates core clocks for the R8A7778. It includes two PLLs and +several fixed ratio dividers + +Required Properties: + + - compatible: Must be "renesas,r8a7778-cpg-clocks" + - reg: Base address and length of the memory resource used by the CPG + - #clock-cells: Must be 1 + - clock-output-names: The names of the clocks. Supported clocks are + "plla", "pllb", "b", "out", "p", "s", and "s1". + + +Example +------- + + cpg_clocks: cpg_clocks@ffc80000 { + compatible = "renesas,r8a7778-cpg-clocks"; + reg = <0xffc80000 0x80>; + #clock-cells = <1>; + clocks = <&extal_clk>; + clock-output-names = "plla", "pllb", "b", + "out", "p", "s", "s1"; + }; diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt index c40711e8e8f7df7c27f74d1dcf418909a96bedf2..28b28309f53575e91752cba6453e5594ea985de3 100644 --- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt +++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt @@ -17,7 +17,8 @@ Required properties: - #clock-cells: from common clock binding; shall be set to 1. - clocks: from common clock binding; list of parent clock handles, shall be xtal reference clock or xtal and clkin for - si5351c only. + si5351c only. Corresponding clock input names are "xtal" and + "clkin" respectively. - #address-cells: shall be set to 1. - #size-cells: shall be set to 0. @@ -71,6 +72,7 @@ i2c-master-node { /* connect xtal input to 25MHz reference */ clocks = <&ref25>; + clock-names = "xtal"; /* connect xtal input as source of pll0 and pll1 */ silabs,pll-source = <0 0>, <1 0>; diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index 60b44285250d3b3e9e580f9d71e51239df3b1c76..4fa11af3d378ef281e43717490c012263b901122 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -20,6 +20,7 @@ Required properties: "allwinner,sun8i-a23-axi-clk" - for the AXI clock on A23 "allwinner,sun4i-a10-axi-gates-clk" - for the AXI gates "allwinner,sun4i-a10-ahb-clk" - for the AHB clock + "allwinner,sun5i-a13-ahb-clk" - for the AHB clock on A13 "allwinner,sun9i-a80-ahb-clk" - for the AHB bus clocks on A80 "allwinner,sun4i-a10-ahb-gates-clk" - for the AHB gates on A10 "allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13 @@ -66,6 +67,8 @@ Required properties: "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20 "allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13 "allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31 + "allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80 + "allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80 Required properties for all clocks: - reg : shall be the control register address for the clock. diff --git a/Documentation/devicetree/bindings/common-properties.txt b/Documentation/devicetree/bindings/common-properties.txt new file mode 100644 index 0000000000000000000000000000000000000000..3193979b1d05002fcf2bc4700efcd4bbfeb65d88 --- /dev/null +++ b/Documentation/devicetree/bindings/common-properties.txt @@ -0,0 +1,60 @@ +Common properties + +The ePAPR specification does not define any properties related to hardware +byteswapping, but endianness issues show up frequently in porting Linux to +different machine types. This document attempts to provide a consistent +way of handling byteswapping across drivers. + +Optional properties: + - big-endian: Boolean; force big endian register accesses + unconditionally (e.g. ioread32be/iowrite32be). Use this if you + know the peripheral always needs to be accessed in BE mode. + - little-endian: Boolean; force little endian register accesses + unconditionally (e.g. readl/writel). Use this if you know the + peripheral always needs to be accessed in LE mode. + - native-endian: Boolean; always use register accesses matched to the + endianness of the kernel binary (e.g. LE vmlinux -> readl/writel, + BE vmlinux -> ioread32be/iowrite32be). In this case no byteswaps + will ever be performed. Use this if the hardware "self-adjusts" + register endianness based on the CPU's configured endianness. + +If a binding supports these properties, then the binding should also +specify the default behavior if none of these properties are present. +In such cases, little-endian is the preferred default, but it is not +a requirement. The of_device_is_big_endian() and of_fdt_is_big_endian() +helper functions do assume that little-endian is the default, because +most existing (PCI-based) drivers implicitly default to LE by using +readl/writel for MMIO accesses. + +Examples: +Scenario 1 : CPU in LE mode & device in LE mode. +dev: dev@40031000 { + compatible = "name"; + reg = <0x40031000 0x1000>; + ... + native-endian; +}; + +Scenario 2 : CPU in LE mode & device in BE mode. +dev: dev@40031000 { + compatible = "name"; + reg = <0x40031000 0x1000>; + ... + big-endian; +}; + +Scenario 3 : CPU in BE mode & device in BE mode. +dev: dev@40031000 { + compatible = "name"; + reg = <0x40031000 0x1000>; + ... + native-endian; +}; + +Scenario 4 : CPU in BE mode & device in LE mode. +dev: dev@40031000 { + compatible = "name"; + reg = <0x40031000 0x1000>; + ... + little-endian; +}; diff --git a/Documentation/devicetree/bindings/cris/axis.txt b/Documentation/devicetree/bindings/cris/axis.txt new file mode 100644 index 0000000000000000000000000000000000000000..d209ca2a47c06606b20caf438426c9d7a7321bc7 --- /dev/null +++ b/Documentation/devicetree/bindings/cris/axis.txt @@ -0,0 +1,9 @@ +Axis Communications AB +ARTPEC series SoC Device Tree Bindings + + +CRISv32 based SoCs are ETRAX FS and ARTPEC-3: + + - compatible = "axis,crisv32"; + + diff --git a/Documentation/devicetree/bindings/cris/boards.txt b/Documentation/devicetree/bindings/cris/boards.txt new file mode 100644 index 0000000000000000000000000000000000000000..533dd273ccf7285e8669834317fc9ad9cdeaea96 --- /dev/null +++ b/Documentation/devicetree/bindings/cris/boards.txt @@ -0,0 +1,8 @@ +Boards based on the CRIS SoCs: + +Required root node properties: + - compatible = should be one or more of the following: + - "axis,dev88" - for Axis devboard 88 with ETRAX FS + +Optional: + diff --git a/Documentation/devicetree/bindings/cris/interrupts.txt b/Documentation/devicetree/bindings/cris/interrupts.txt new file mode 100644 index 0000000000000000000000000000000000000000..e8b123b0a5e6c7928723b9729e4d628d3dc74f9d --- /dev/null +++ b/Documentation/devicetree/bindings/cris/interrupts.txt @@ -0,0 +1,23 @@ +* CRISv32 Interrupt Controller + +Interrupt controller for the CRISv32 SoCs. + +Main node required properties: + +- compatible : should be: + "axis,crisv32-intc" +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The type shall be a and the value shall be 1. +- reg: physical base address and size of the intc registers map. + +Example: + + intc: interrupt-controller { + compatible = "axis,crisv32-intc"; + reg = <0xb001c000 0x1000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + diff --git a/Documentation/devicetree/bindings/crypto/img-hash.txt b/Documentation/devicetree/bindings/crypto/img-hash.txt new file mode 100644 index 0000000000000000000000000000000000000000..91a3d757d641bb68b0f4556b40673a0431ab6033 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/img-hash.txt @@ -0,0 +1,27 @@ +Imagination Technologies hardware hash accelerator + +The hash accelerator provides hardware hashing acceleration for +SHA1, SHA224, SHA256 and MD5 hashes + +Required properties: + +- compatible : "img,hash-accelerator" +- reg : Offset and length of the register set for the module, and the DMA port +- interrupts : The designated IRQ line for the hashing module. +- dmas : DMA specifier as per Documentation/devicetree/bindings/dma/dma.txt +- dma-names : Should be "tx" +- clocks : Clock specifiers +- clock-names : "sys" Used to clock the hash block registers + "hash" Used to clock data through the accelerator + +Example: + + hash: hash@18149600 { + compatible = "img,hash-accelerator"; + reg = <0x18149600 0x100>, <0x18101100 0x4>; + interrupts = ; + dmas = <&dma 8 0xffffffff 0>; + dma-names = "tx"; + clocks = <&cr_periph SYS_CLK_HASH>, <&clk_periph PERIPH_CLK_ROM>; + clock-names = "sys", "hash"; + }; diff --git a/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt b/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt new file mode 100644 index 0000000000000000000000000000000000000000..d3058768b23de17e4c9916c2552b1266b9263d56 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt @@ -0,0 +1,47 @@ +Applied Micro X-Gene SoC DMA nodes + +DMA nodes are defined to describe on-chip DMA interfaces in +APM X-Gene SoC. + +Required properties for DMA interfaces: +- compatible: Should be "apm,xgene-dma". +- device_type: set to "dma". +- reg: Address and length of the register set for the device. + It contains the information of registers in the following order: + 1st - DMA control and status register address space. + 2nd - Descriptor ring control and status register address space. + 3rd - Descriptor ring command register address space. + 4th - Soc efuse register address space. +- interrupts: DMA has 5 interrupts sources. 1st interrupt is + DMA error reporting interrupt. 2nd, 3rd, 4th and 5th interrupts + are completion interrupts for each DMA channels. +- clocks: Reference to the clock entry. + +Optional properties: +- dma-coherent : Present if dma operations are coherent + +Example: + dmaclk: dmaclk@1f27c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f27c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "dmaclk"; + }; + + dma: dma@1f270000 { + compatible = "apm,xgene-storm-dma"; + device_type = "dma"; + reg = <0x0 0x1f270000 0x0 0x10000>, + <0x0 0x1f200000 0x0 0x10000>, + <0x0 0x1b008000 0x0 0x2000>, + <0x0 0x1054a000 0x0 0x100>; + interrupts = <0x0 0x82 0x4>, + <0x0 0xb8 0x4>, + <0x0 0xb9 0x4>, + <0x0 0xba 0x4>, + <0x0 0xbb 0x4>; + dma-coherent; + clocks = <&dmaclk 0>; + }; diff --git a/Documentation/devicetree/bindings/dma/bcm2835-dma.txt b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt similarity index 100% rename from Documentation/devicetree/bindings/dma/bcm2835-dma.txt rename to Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt index a4873e5e3e36de172c49f59108360e32aca9fefd..e30e184f50c727aa84d2284914581ce9927dba1c 100644 --- a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt @@ -38,7 +38,7 @@ dma_apbx: dma-apbx@80024000 { 80 81 68 69 70 71 72 73 74 75 76 77>; - interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty", + interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty", "saif0", "saif1", "i2c0", "i2c1", "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx", "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx"; diff --git a/Documentation/devicetree/bindings/dma/jz4780-dma.txt b/Documentation/devicetree/bindings/dma/jz4780-dma.txt new file mode 100644 index 0000000000000000000000000000000000000000..f25feee62b158a1833c04bf230d57937ca8cc828 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/jz4780-dma.txt @@ -0,0 +1,56 @@ +* Ingenic JZ4780 DMA Controller + +Required properties: + +- compatible: Should be "ingenic,jz4780-dma" +- reg: Should contain the DMA controller registers location and length. +- interrupts: Should contain the interrupt specifier of the DMA controller. +- interrupt-parent: Should be the phandle of the interrupt controller that +- clocks: Should contain a clock specifier for the JZ4780 PDMA clock. +- #dma-cells: Must be <2>. Number of integer cells in the dmas property of + DMA clients (see below). + +Optional properties: + +- ingenic,reserved-channels: Bitmask of channels to reserve for devices that + need a specific channel. These channels will only be assigned when explicitly + requested by a client. The primary use for this is channels 0 and 1, which + can be configured to have special behaviour for NAND/BCH when using + programmable firmware. + +Example: + +dma: dma@13420000 { + compatible = "ingenic,jz4780-dma"; + reg = <0x13420000 0x10000>; + + interrupt-parent = <&intc>; + interrupts = <10>; + + clocks = <&cgu JZ4780_CLK_PDMA>; + + #dma-cells = <2>; + + ingenic,reserved-channels = <0x3>; +}; + +DMA clients must use the format described in dma.txt, giving a phandle to the +DMA controller plus the following 2 integer cells: + +1. Request type: The DMA request type for transfers to/from the device on + the allocated channel, as defined in the SoC documentation. + +2. Channel: If set to 0xffffffff, any available channel will be allocated for + the client. Otherwise, the exact channel specified will be used. The channel + should be reserved on the DMA controller using the ingenic,reserved-channels + property. + +Example: + +uart0: serial@10030000 { + ... + dmas = <&dma 0x14 0xffffffff + &dma 0x15 0xffffffff>; + dma-names = "tx", "rx"; + ... +}; diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt index f8c3311b7153e76619e8e5e47434b07898705ec6..1c9d48ea49148c20d8f3eae564e45a06d6c9c2f2 100644 --- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt +++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt @@ -4,6 +4,7 @@ Required properties: - compatible: must be one of the following: * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084 * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960 + * "qcom,bam-v1.7.0" for MSM8916 - reg: Address range for DMA registers - interrupts: Should contain the one interrupt shared by all channels - #dma-cells: must be <1>, the cell in the dmas property of the client device diff --git a/Documentation/devicetree/bindings/dma/rcar-audmapp.txt b/Documentation/devicetree/bindings/dma/rcar-audmapp.txt deleted file mode 100644 index 61bca509d7b99f734d1c7f054587aaa29dff8261..0000000000000000000000000000000000000000 --- a/Documentation/devicetree/bindings/dma/rcar-audmapp.txt +++ /dev/null @@ -1,29 +0,0 @@ -* R-Car Audio DMAC peri peri Device Tree bindings - -Required properties: -- compatible: should be "renesas,rcar-audmapp" -- #dma-cells: should be <1>, see "dmas" property below - -Example: - audmapp: audio-dma-pp@0xec740000 { - compatible = "renesas,rcar-audmapp"; - #dma-cells = <1>; - - reg = <0 0xec740000 0 0x200>; - }; - - -* DMA client - -Required properties: -- dmas: a list of <[DMA multiplexer phandle] [SRS << 8 | DRS]> pairs. - where SRS/DRS are specified in the SoC manual. - It will be written into PDMACHCR as high 16-bit parts. -- dma-names: a list of DMA channel names, one per "dmas" entry - -Example: - - dmas = <&audmapp 0x2d00 - &audmapp 0x3700>; - dma-names = "src0_ssiu0", - "dvc0_ssiu0"; diff --git a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt new file mode 100644 index 0000000000000000000000000000000000000000..040f365954cc4d105c64a3a204b9fc342fc22ce2 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt @@ -0,0 +1,37 @@ +* Renesas USB DMA Controller Device Tree bindings + +Required Properties: +- compatible: must contain "renesas,usb-dmac" +- reg: base address and length of the registers block for the DMAC +- interrupts: interrupt specifiers for the DMAC, one for each entry in + interrupt-names. +- interrupt-names: one entry per channel, named "ch%u", where %u is the + channel number ranging from zero to the number of channels minus one. +- clocks: a list of phandle + clock-specifier pairs. +- #dma-cells: must be <1>, the cell specifies the channel number of the DMAC + port connected to the DMA client. +- dma-channels: number of DMA channels + +Example: R8A7790 (R-Car H2) USB-DMACs + + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH + 0 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH + 0 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>; + #dma-cells = <1>; + dma-channels = <2>; + }; diff --git a/Documentation/devicetree/bindings/drm/imx/ldb.txt b/Documentation/devicetree/bindings/drm/imx/ldb.txt index 443bcb6134d53ca6afc8587b611a82ec30e89d22..9a21366436f6de14f862bed9ee71bb054e7b03d4 100644 --- a/Documentation/devicetree/bindings/drm/imx/ldb.txt +++ b/Documentation/devicetree/bindings/drm/imx/ldb.txt @@ -44,23 +44,30 @@ Optional properties: LVDS Channel ============ -Each LVDS Channel has to contain a display-timings node that describes the -video timings for the connected LVDS display. For detailed information, also -have a look at Documentation/devicetree/bindings/video/display-timing.txt. +Each LVDS Channel has to contain either an of graph link to a panel device node +or a display-timings node that describes the video timings for the connected +LVDS display as well as the fsl,data-mapping and fsl,data-width properties. Required properties: - reg : should be <0> or <1> + - port: Input and output port nodes with endpoint definitions as defined in + Documentation/devicetree/bindings/graph.txt. + On i.MX5, the internal two-input-multiplexer is used. Due to hardware + limitations, only one input port (port@[0,1]) can be used for each channel + (lvds-channel@[0,1], respectively). + On i.MX6, there should be four input ports (port@[0-3]) that correspond + to the four LVDS multiplexer inputs. + A single output port (port@2 on i.MX5, port@4 on i.MX6) must be connected + to a panel input port. Optionally, the output port can be left out if + display-timings are used instead. + +Optional properties (required if display-timings are used): + - display-timings : A node that describes the display timings as defined in + Documentation/devicetree/bindings/video/display-timing.txt. - fsl,data-mapping : should be "spwg" or "jeida" This describes how the color bits are laid out in the serialized LVDS signal. - fsl,data-width : should be <18> or <24> - - port: A port node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. - On i.MX5, the internal two-input-multiplexer is used. - Due to hardware limitations, only one port (port@[0,1]) - can be used for each channel (lvds-channel@[0,1], respectively) - On i.MX6, there should be four ports (port@[0-3]) that correspond - to the four LVDS multiplexer inputs. example: @@ -73,23 +80,21 @@ ldb: ldb@53fa8008 { #size-cells = <0>; compatible = "fsl,imx53-ldb"; gpr = <&gpr>; - clocks = <&clks 122>, <&clks 120>, - <&clks 115>, <&clks 116>, - <&clks 123>, <&clks 85>; + clocks = <&clks IMX5_CLK_LDB_DI0_SEL>, + <&clks IMX5_CLK_LDB_DI1_SEL>, + <&clks IMX5_CLK_IPU_DI0_SEL>, + <&clks IMX5_CLK_IPU_DI1_SEL>, + <&clks IMX5_CLK_LDB_DI0_GATE>, + <&clks IMX5_CLK_LDB_DI1_GATE>; clock-names = "di0_pll", "di1_pll", "di0_sel", "di1_sel", "di0", "di1"; + /* Using an of-graph endpoint link to connect the panel */ lvds-channel@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; - fsl,data-mapping = "spwg"; - fsl,data-width = <24>; - - display-timings { - /* ... */ - }; port@0 { reg = <0>; @@ -98,8 +103,17 @@ ldb: ldb@53fa8008 { remote-endpoint = <&ipu_di0_lvds0>; }; }; + + port@2 { + reg = <2>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; }; + /* Using display-timings and fsl,data-mapping/width instead */ lvds-channel@1 { #address-cells = <1>; #size-cells = <0>; @@ -120,3 +134,13 @@ ldb: ldb@53fa8008 { }; }; }; + +panel: lvds-panel { + /* ... */ + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt new file mode 100644 index 0000000000000000000000000000000000000000..af0b903de293a061167aea7b07c203d3fafa5527 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt @@ -0,0 +1,18 @@ +USB GPIO Extcon device + +This is a virtual device used to generate USB cable states from the USB ID pin +connected to a GPIO pin. + +Required properties: +- compatible: Should be "linux,extcon-usb-gpio" +- id-gpio: gpio for USB ID pin. See gpio binding. + +Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below: + extcon_usb1 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>; + } + + &omap_dwc3_1 { + extcon = <&extcon_usb1>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-bcm-kona.txt b/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.txt similarity index 100% rename from Documentation/devicetree/bindings/gpio/gpio-bcm-kona.txt rename to Documentation/devicetree/bindings/gpio/brcm,kona-gpio.txt diff --git a/Documentation/devicetree/bindings/gpio/gpio-altera.txt b/Documentation/devicetree/bindings/gpio/gpio-altera.txt new file mode 100644 index 0000000000000000000000000000000000000000..12f50149e1ed376398d127663b386bf082f9ffd3 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-altera.txt @@ -0,0 +1,43 @@ +Altera GPIO controller bindings + +Required properties: +- compatible: + - "altr,pio-1.0" +- reg: Physical base address and length of the controller's registers. +- #gpio-cells : Should be 2 + - The first cell is the gpio offset number. + - The second cell is reserved and is currently unused. +- gpio-controller : Marks the device node as a GPIO controller. +- interrupt-controller: Mark the device node as an interrupt controller +- #interrupt-cells : Should be 1. The interrupt type is fixed in the hardware. + - The first cell is the GPIO offset number within the GPIO controller. +- interrupts: Specify the interrupt. +- altr,interrupt-trigger: Specifies the interrupt trigger type the GPIO + hardware is synthesized. This field is required if the Altera GPIO controller + used has IRQ enabled as the interrupt type is not software controlled, + but hardware synthesized. Required if GPIO is used as an interrupt + controller. The value is defined in + Only the following flags are supported: + IRQ_TYPE_EDGE_RISING + IRQ_TYPE_EDGE_FALLING + IRQ_TYPE_EDGE_BOTH + IRQ_TYPE_LEVEL_HIGH + +Optional properties: +- altr,ngpio: Width of the GPIO bank. This defines how many pins the + GPIO device has. Ranges between 1-32. Optional and defaults to 32 if not + specified. + +Example: + +gpio_altr: gpio@0xff200000 { + compatible = "altr,pio-1.0"; + reg = <0xff200000 0x10>; + interrupts = <0 45 4>; + altr,ngpio = <32>; + altr,interrupt-trigger = ; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <1>; + interrupt-controller; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt index f7a158d858620f73133aded14765f042742a3fb4..5788d5cf12524b95c556ec0451204c3b735f6d43 100644 --- a/Documentation/devicetree/bindings/gpio/gpio.txt +++ b/Documentation/devicetree/bindings/gpio/gpio.txt @@ -116,6 +116,29 @@ Every GPIO controller node must contain both an empty "gpio-controller" property, and a #gpio-cells integer property, which indicates the number of cells in a gpio-specifier. +The GPIO chip may contain GPIO hog definitions. GPIO hogging is a mechanism +providing automatic GPIO request and configuration as part of the +gpio-controller's driver probe function. + +Each GPIO hog definition is represented as a child node of the GPIO controller. +Required properties: +- gpio-hog: A property specifying that this child node represent a GPIO hog. +- gpios: Store the GPIO information (id, flags, ...). Shall contain the + number of cells specified in its parent node (GPIO controller + node). +Only one of the following properties scanned in the order shown below. +This means that when multiple properties are present they will be searched +in the order presented below and the first match is taken as the intended +configuration. +- input: A property specifying to set the GPIO direction as input. +- output-low A property specifying to set the GPIO direction as output with + the value low. +- output-high A property specifying to set the GPIO direction as output with + the value high. + +Optional properties: +- line-name: The GPIO label name. If not present the node name is used. + Example of two SOC GPIO banks defined as gpio-controller nodes: qe_pio_a: gpio-controller@1400 { @@ -123,6 +146,13 @@ Example of two SOC GPIO banks defined as gpio-controller nodes: reg = <0x1400 0x18>; gpio-controller; #gpio-cells = <2>; + + line_b { + gpio-hog; + gpios = <6 0>; + output-low; + line-name = "foo-bar-gpio"; + }; }; qe_pio_e: gpio-controller@1460 { diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt index 67a2e4e414a5eb93409807b9e837cda236abd977..98d1983969566a0278b4544a5a24cef3c14fe85c 100644 --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt @@ -12,7 +12,7 @@ Required properties: gpio_mux. - interrupt-names : Should be the names of irq resources. Each interrupt uses its own interrupt name, so there should be as many interrupt names - as referenced interrups. + as referenced interrupts. - interrupt-controller : Identifies the node as an interrupt controller. - #interrupt-cells: Specifies the number of cells needed to encode an interrupt source. diff --git a/Documentation/devicetree/bindings/hwrng/brcm,iproc-rng200.txt b/Documentation/devicetree/bindings/hwrng/brcm,iproc-rng200.txt new file mode 100644 index 0000000000000000000000000000000000000000..e25a456664b919c5317df407181df43bd61dd1ea --- /dev/null +++ b/Documentation/devicetree/bindings/hwrng/brcm,iproc-rng200.txt @@ -0,0 +1,12 @@ +HWRNG support for the iproc-rng200 driver + +Required properties: +- compatible : "brcm,iproc-rng200" +- reg : base address and size of control register block + +Example: + +rng { + compatible = "brcm,iproc-rng200"; + reg = <0x18032000 0x28>; +}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-bcm-kona.txt b/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.txt similarity index 100% rename from Documentation/devicetree/bindings/i2c/i2c-bcm-kona.txt rename to Documentation/devicetree/bindings/i2c/brcm,kona-i2c.txt diff --git a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt index 2dc935b4113d22e4bd0c80f533d3c9caefb7be44..a4e1cbc810c19e43f83a273bdb2f11e334bb5fe0 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt @@ -10,6 +10,9 @@ Required properties: Recommended properties : - interrupts : standard interrupt property. - clock-frequency : desired I2C bus clock frequency in Hz. +- ti,has-pfunc: boolean; if defined, it indicates that SoC supports PFUNC + registers. PFUNC registers allow to switch I2C pins to function as + GPIOs, so they can by toggled manually. Example (enbw_cmc board): i2c@1c22000 { diff --git a/Documentation/devicetree/bindings/i2c/i2c-digicolor.txt b/Documentation/devicetree/bindings/i2c/i2c-digicolor.txt new file mode 100644 index 0000000000000000000000000000000000000000..457a098d4f7e63b2ad0308ae6de56cf4856b8e2b --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-digicolor.txt @@ -0,0 +1,25 @@ +Conexant Digicolor I2C controller + +Required properties: + - compatible: must be "cnxt,cx92755-i2c" + - reg: physical address and length of the device registers + - interrupts: a single interrupt specifier + - clocks: clock for the device + - #address-cells: should be <1> + - #size-cells: should be <0> + +Optional properties: +- clock-frequency: the desired I2C bus clock frequency in Hz; in + absence of this property the default value is used (100 kHz). + +Example: + + i2c: i2c@f0000120 { + compatible = "cnxt,cx92755-i2c"; + reg = <0xf0000120 0x10>; + interrupts = <28>; + clocks = <&main_clk>; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt b/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt new file mode 100644 index 0000000000000000000000000000000000000000..231e4cc4008cbcf0783c6ab438fa3eca1815c4fb --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt @@ -0,0 +1,35 @@ +* Ingenic JZ4780 I2C Bus controller + +Required properties: +- compatible: should be "ingenic,jz4780-i2c" +- reg: Should contain the address & size of the I2C controller registers. +- interrupts: Should specify the interrupt provided by parent. +- clocks: Should contain a single clock specifier for the JZ4780 I2C clock. +- clock-frequency: desired I2C bus clock frequency in Hz. + +Recommended properties: +- pinctrl-names: should be "default"; +- pinctrl-0: phandle to pinctrl function + +Optional properties: +- interrupt-parent: Should be the phandle of the interrupt controller that + delivers interrupts to the I2C block. + +Example + +/ { + i2c4: i2c4@0x10054000 { + compatible = "ingenic,jz4780-i2c"; + reg = <0x10054000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <56>; + + clocks = <&cgu JZ4780_CLK_SMB4>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c4_data>; + + }; +}; + diff --git a/Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt b/Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt new file mode 100644 index 0000000000000000000000000000000000000000..f818ef507ab7cdf416be4065b664182dc52a64c4 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt @@ -0,0 +1,22 @@ +Device tree configuration for the I2C controller on the XLP9xx/5xx SoC + +Required properties: +- compatible : should be "netlogic,xlp980-i2c" +- reg : bus address start and address range size of device +- interrupts : interrupt number + +Optional properties: +- clock-frequency : frequency of bus clock in Hz + Defaults to 100 KHz when the property is not specified + +Example: + +i2c0: i2c@113100 { + compatible = "netlogic,xlp980-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x113100 0x100>; + clock-frequency = <400000>; + interrupts = <30>; + interrupt-parent = <&pic>; +}; diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index aaa8325004d23ae6313223594817f392c1a31359..ad0c4ac916dd75ed0b7eb07e28b3c62e60f3d725 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -77,6 +77,7 @@ nxp,pca9556 Octal SMBus and I2C registered interface nxp,pca9557 8-bit I2C-bus and SMBus I/O port with reset nxp,pcf8563 Real-time clock/calendar nxp,pcf85063 Tiny Real-Time Clock +oki,ml86v7667 OKI ML86V7667 video decoder ovti,ov5642 OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI and Embedded TrueFocus pericom,pt7c4338 Real-time Clock Module plx,pex8648 48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch @@ -89,6 +90,7 @@ ricoh,rv5c386 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ricoh,rv5c387a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC samsung,24ad0xd1 S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power) sii,s35390a 2-wire CMOS real-time clock +skyworks,sky81452 Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply st-micro,24c256 i2c serial eeprom (24cxx) stm,m41t00 Serial Access TIMEKEEPER stm,m41t62 Serial real-time clock (RTC) with alarm diff --git a/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt b/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt new file mode 100644 index 0000000000000000000000000000000000000000..b77f50bd64036614a9cd50fc8e71592c8df197f6 --- /dev/null +++ b/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt @@ -0,0 +1,108 @@ +* Broadcom Keypad Controller device tree bindings + +Broadcom Keypad controller is used to interface a SoC with a matrix-type +keypad device. The keypad controller supports multiple row and column lines. +A key can be placed at each intersection of a unique row and a unique column. +The keypad controller can sense a key-press and key-release and report the +event using a interrupt to the cpu. + +This binding is based on the matrix-keymap binding with the following +changes: + +keypad,num-rows and keypad,num-columns are required. + +Required SoC Specific Properties: +- compatible: should be "brcm,bcm-keypad" + +- reg: physical base address of the controller and length of memory mapped + region. + +- interrupts: The interrupt number to the cpu. + +Board Specific Properties: +- keypad,num-rows: Number of row lines connected to the keypad + controller. + +- keypad,num-columns: Number of column lines connected to the + keypad controller. + +- col-debounce-filter-period: The debounce period for the Column filter. + + KEYPAD_DEBOUNCE_1_ms = 0 + KEYPAD_DEBOUNCE_2_ms = 1 + KEYPAD_DEBOUNCE_4_ms = 2 + KEYPAD_DEBOUNCE_8_ms = 3 + KEYPAD_DEBOUNCE_16_ms = 4 + KEYPAD_DEBOUNCE_32_ms = 5 + KEYPAD_DEBOUNCE_64_ms = 6 + KEYPAD_DEBOUNCE_128_ms = 7 + +- status-debounce-filter-period: The debounce period for the Status filter. + + KEYPAD_DEBOUNCE_1_ms = 0 + KEYPAD_DEBOUNCE_2_ms = 1 + KEYPAD_DEBOUNCE_4_ms = 2 + KEYPAD_DEBOUNCE_8_ms = 3 + KEYPAD_DEBOUNCE_16_ms = 4 + KEYPAD_DEBOUNCE_32_ms = 5 + KEYPAD_DEBOUNCE_64_ms = 6 + KEYPAD_DEBOUNCE_128_ms = 7 + +- row-output-enabled: An optional property indicating whether the row or + column is being used as output. If specified the row is being used + as the output. Else defaults to column. + +- pull-up-enabled: An optional property indicating the Keypad scan mode. + If specified implies the keypad scan pull-up has been enabled. + +- autorepeat: Boolean, Enable auto repeat feature of Linux input + subsystem (optional). + +- linux,keymap: The keymap for keys as described in the binding document + devicetree/bindings/input/matrix-keymap.txt. + +Example: +#include "dt-bindings/input/input.h" + +/ { + keypad: keypad@180ac000 { + /* Required SoC specific properties */ + compatible = "brcm,bcm-keypad"; + + /* Required Board specific properties */ + keypad,num-rows = <5>; + keypad,num-columns = <5>; + status = "okay"; + + linux,keymap = ; + + /* Optional board specific properties */ + col-debounce-filter-period = <5>; + row-output-enabled; + pull-up-enabled; + + }; +}; diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt new file mode 100644 index 0000000000000000000000000000000000000000..07bf55f6e0b9a8375dee913651332f6454cb72b3 --- /dev/null +++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt @@ -0,0 +1,43 @@ +Qualcomm PM8941 PMIC Power Key + +PROPERTIES + +- compatible: + Usage: required + Value type: + Definition: must be one of: + "qcom,pm8941-pwrkey" + +- reg: + Usage: required + Value type: + Definition: base address of registers for block + +- interrupts: + Usage: required + Value type: + Definition: key change interrupt; The format of the specifier is + defined by the binding document describing the node's + interrupt parent. + +- debounce: + Usage: optional + Value type: + Definition: time in microseconds that key must be pressed or released + for state change interrupt to trigger. + +- bias-pull-up: + Usage: optional + Value type: + Definition: presence of this property indicates that the KPDPWR_N pin + should be configured for pull up. + +EXAMPLE + + pwrkey@800 { + compatible = "qcom,pm8941-pwrkey"; + reg = <0x800>; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt new file mode 100644 index 0000000000000000000000000000000000000000..34e3382a065903f546593ea1178dcba1698047d2 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt @@ -0,0 +1,76 @@ +* Broadcom's IPROC Touchscreen Controller + +Required properties: +- compatible: must be "brcm,iproc-touchscreen" +- reg: physical base address of the controller and length of memory mapped + region. +- clocks: The clock provided by the SOC to driver the tsc +- clock-name: name for the clock +- interrupts: The touchscreen controller's interrupt + +Optional properties: +- scanning_period: Time between scans. Each step is 1024 us. Valid 1-256. +- debounce_timeout: Each step is 512 us. Valid 0-255 +- settling_timeout: The settling duration (in ms) is the amount of time + the tsc waits to allow the voltage to settle after + turning on the drivers in detection mode. + Valid values: 0-11 + 0 = 0.008 ms + 1 = 0.01 ms + 2 = 0.02 ms + 3 = 0.04 ms + 4 = 0.08 ms + 5 = 0.16 ms + 6 = 0.32 ms + 7 = 0.64 ms + 8 = 1.28 ms + 9 = 2.56 ms + 10 = 5.12 ms + 11 = 10.24 ms +- touch_timeout: The continuous number of scan periods in which touch is + not detected before the controller returns to idle state. + Valid values 0-255. +- average_data: Number of data samples which are averaged before a final + data point is placed into the FIFO + Valid values 0-7 + 0 = 1 sample + 1 = 2 samples + 2 = 4 samples + 3 = 8 samples + 4 = 16 samples + 5 = 32 samples + 6 = 64 samples + 7 = 128 samples +- fifo_threshold: Interrupt is generated whenever the number of fifo + entries exceeds this value + Valid values 0-31 +- touchscreen-size-x: horizontal resolution of touchscreen (in pixels) +- touchscreen-size-y: vertical resolution of touchscreen (in pixels) +- touchscreen-fuzz-x: horizontal noise value of the absolute input + device (in pixels) +- touchscreen-fuzz-y: vertical noise value of the absolute input + device (in pixels) +- touchscreen-inverted-x: X axis is inverted (boolean) +- touchscreen-inverted-y: Y axis is inverted (boolean) + +Example: + + touchscreen: tsc@0x180A6000 { + compatible = "brcm,iproc-touchscreen"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x180A6000 0x40>; + clocks = <&adc_clk>; + clock-names = "tsc_clk"; + interrupts = ; + + scanning_period = <5>; + debounce_timeout = <40>; + settling_timeout = <7>; + touch_timeout = <10>; + average_data = <5>; + fifo_threshold = <1>; + /* Touchscreen is rotated 180 degrees. */ + touchscreen-inverted-x; + touchscreen-inverted-y; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt b/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt new file mode 100644 index 0000000000000000000000000000000000000000..d11f8d615b5de8a02eae964c98aa4b1ccaaeb518 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt @@ -0,0 +1,46 @@ +* ChipOne icn8318 I2C touchscreen controller + +Required properties: + - compatible : "chipone,icn8318" + - reg : I2C slave address of the chip (0x40) + - interrupt-parent : a phandle pointing to the interrupt controller + serving the interrupt for this chip + - interrupts : interrupt specification for the icn8318 interrupt + - wake-gpios : GPIO specification for the WAKE input + - touchscreen-size-x : horizontal resolution of touchscreen (in pixels) + - touchscreen-size-y : vertical resolution of touchscreen (in pixels) + +Optional properties: + - pinctrl-names : should be "default" + - pinctrl-0: : a phandle pointing to the pin settings for the + control gpios + - touchscreen-fuzz-x : horizontal noise value of the absolute input + device (in pixels) + - touchscreen-fuzz-y : vertical noise value of the absolute input + device (in pixels) + - touchscreen-inverted-x : X axis is inverted (boolean) + - touchscreen-inverted-y : Y axis is inverted (boolean) + - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) + Swapping is done after inverting the axis + +Example: + +i2c@00000000 { + /* ... */ + + chipone_icn8318@40 { + compatible = "chipone,icn8318"; + reg = <0x40>; + interrupt-parent = <&pio>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ + pinctrl-names = "default"; + pinctrl-0 = <&ts_wake_pin_p66>; + wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + }; + + /* ... */ +}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt new file mode 100644 index 0000000000000000000000000000000000000000..8ba98eec765bc5cf27ee1e620bb53a282bf8d921 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt @@ -0,0 +1,29 @@ +Device tree bindings for Goodix GT9xx series touchscreen controller + +Required properties: + + - compatible : Should be "goodix,gt911" + or "goodix,gt9110" + or "goodix,gt912" + or "goodix,gt927" + or "goodix,gt9271" + or "goodix,gt928" + or "goodix,gt967" + - reg : I2C address of the chip. Should be 0x5d or 0x14 + - interrupt-parent : Interrupt controller to which the chip is connected + - interrupts : Interrupt to which the chip is connected + +Example: + + i2c@00000000 { + /* ... */ + + gt928@5d { + compatible = "goodix,gt928"; + reg = <0x5d>; + interrupt-parent = <&gpio>; + interrupts = <0 0>; + }; + + /* ... */ + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt index 433332d3b2ba77b63746b331abcff3072f84c934..89abecd938cb98b55d82070ed108eb92bf914b8d 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt @@ -2,14 +2,27 @@ sun4i resistive touchscreen controller -------------------------------------- Required properties: - - compatible: "allwinner,sun4i-a10-ts" or "allwinner,sun6i-a31-ts" + - compatible: "allwinner,sun4i-a10-ts", "allwinner,sun5i-a13-ts" or + "allwinner,sun6i-a31-ts" - reg: mmio address range of the chip - interrupts: interrupt to which the chip is connected - #thermal-sensor-cells: shall be 0 Optional properties: - - allwinner,ts-attached: boolean indicating that an actual touchscreen is - attached to the controller + - allwinner,ts-attached : boolean indicating that an actual touchscreen + is attached to the controller + - allwinner,tp-sensitive-adjust : integer (4 bits) + adjust sensitivity of pen down detection + between 0 (least sensitive) and 15 + (defaults to 15) + - allwinner,filter-type : integer (2 bits) + select median and averaging filter + samples used for median / averaging filter + 0: 4/2 + 1: 5/3 + 2: 8/4 + 3: 16/8 + (defaults to 1) Example: @@ -19,4 +32,7 @@ Example: interrupts = <29>; allwinner,ts-attached; #thermal-sensor-cells = <0>; + /* sensitive/noisy touch panel */ + allwinner,tp-sensitive-adjust = <0>; + allwinner,filter-type = <3>; }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt new file mode 100644 index 0000000000000000000000000000000000000000..5aaa6b3aa90c26ef2aa3a4feff7218eb832c4a0e --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt @@ -0,0 +1,16 @@ +* Semtech SX8654 I2C Touchscreen Controller + +Required properties: +- compatible: must be "semtech,sx8654" +- reg: i2c slave address +- interrupt-parent: the phandle for the interrupt controller +- interrupts: touch controller interrupt + +Example: + + sx8654@48 { + compatible = "semtech,sx8654"; + reg = <0x48>; + interrupt-parent = <&gpio6>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt index d8e06163c54edd5d3f5c44bb983b0e01b5593dd9..ac23caf518ad07b59ef0aa17feae18519b3ba0be 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt @@ -16,6 +16,8 @@ Optional properties for Touchscreens: controller) - touchscreen-inverted-x : X axis is inverted (boolean) - touchscreen-inverted-y : Y axis is inverted (boolean) + - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) + Swapping is done after inverting the axis Deprecated properties for Touchscreens: - x-size : deprecated name for touchscreen-size-x diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt new file mode 100644 index 0000000000000000000000000000000000000000..8f48aad50868754824687d185e2744e35890677d --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt @@ -0,0 +1,41 @@ +Broadcom BCM3380-style Level 1 / Level 2 interrupt controller + +This interrupt controller shows up in various forms on many BCM338x/BCM63xx +chipsets. It has the following properties: + +- outputs a single interrupt signal to its interrupt controller parent + +- contains one or more enable/status word pairs, which often appear at + different offsets in different blocks + +- no atomic set/clear operations + +Required properties: + +- compatible: should be "brcm,bcm3380-l2-intc" +- reg: specifies one or more enable/status pairs, in the following format: + ... +- interrupt-controller: identifies the node as an interrupt controller +- #interrupt-cells: specifies the number of cells needed to encode an interrupt + source, should be 1. +- interrupt-parent: specifies the phandle to the parent interrupt controller + this one is cascaded from +- interrupts: specifies the interrupt line in the interrupt-parent controller + node, valid values depend on the type of parent interrupt controller + +Optional properties: + +- brcm,irq-can-wake: if present, this means the L2 controller can be used as a + wakeup source for system suspend/resume. + +Example: + +irq0_intc: interrupt-controller@10000020 { + compatible = "brcm,bcm3380-l2-intc"; + reg = <0x10000024 0x4 0x1000002c 0x4>, + <0x10000020 0x4 0x10000028 0x4>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&cpu_intc>; + interrupts = <2>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt new file mode 100644 index 0000000000000000000000000000000000000000..cc217b22dccd1856c1b77db9d6476e21417da1c7 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt @@ -0,0 +1,52 @@ +Broadcom BCM7038-style Level 1 interrupt controller + +This block is a first level interrupt controller that is typically connected +directly to one of the HW INT lines on each CPU. Every BCM7xxx set-top chip +since BCM7038 has contained this hardware. + +Key elements of the hardware design include: + +- 64, 96, 128, or 160 incoming level IRQ lines + +- Most onchip peripherals are wired directly to an L1 input + +- A separate instance of the register set for each CPU, allowing individual + peripheral IRQs to be routed to any CPU + +- Atomic mask/unmask operations + +- No polarity/level/edge settings + +- No FIFO or priority encoder logic; software is expected to read all + 2-5 status words to determine which IRQs are pending + +Required properties: + +- compatible: should be "brcm,bcm7038-l1-intc" +- reg: specifies the base physical address and size of the registers; + the number of supported IRQs is inferred from the size argument +- interrupt-controller: identifies the node as an interrupt controller +- #interrupt-cells: specifies the number of cells needed to encode an interrupt + source, should be 1. +- interrupt-parent: specifies the phandle to the parent interrupt controller(s) + this one is cascaded from +- interrupts: specifies the interrupt line(s) in the interrupt-parent controller + node; valid values depend on the type of parent interrupt controller + +If multiple reg ranges and interrupt-parent entries are present on an SMP +system, the driver will allow IRQ SMP affinity to be set up through the +/proc/irq/ interface. In the simplest possible configuration, only one +reg range and one interrupt-parent is needed. + +Example: + +periph_intc: periph_intc@1041a400 { + compatible = "brcm,bcm7038-l1-intc"; + reg = <0x1041a400 0x30 0x1041a600 0x30>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>, <3>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt index bae1f218722671da6c9416a43a84be7d125721b1..44a9bb15dd56eacda0aaadc1428d80d0f6e8a105 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt @@ -13,8 +13,7 @@ Such an interrupt controller has the following hardware design: or if they will output an interrupt signal at this 2nd level interrupt controller, in particular for UARTs -- typically has one 32-bit enable word and one 32-bit status word, but on - some hardware may have more than one enable/status pair +- has one 32-bit enable word and one 32-bit status word - no atomic set/clear operations @@ -53,9 +52,7 @@ The typical hardware layout for this controller is represented below: Required properties: - compatible: should be "brcm,bcm7120-l2-intc" -- reg: specifies the base physical address and size of the registers; - multiple pairs may be specified, with the first pair handling IRQ offsets - 0..31 and the second pair handling 32..63 +- reg: specifies the base physical address and size of the registers - interrupt-controller: identifies the node as an interrupt controller - #interrupt-cells: specifies the number of cells needed to encode an interrupt source, should be 1. @@ -66,10 +63,7 @@ Required properties: - brcm,int-map-mask: 32-bits bit mask describing how many and which interrupts are wired to this 2nd level interrupt controller, and how they match their respective interrupt parents. Should match exactly the number of interrupts - specified in the 'interrupts' property, multiplied by the number of - enable/status register pairs implemented by this controller. For - multiple parent IRQs with multiple enable/status words, this looks like: - + specified in the 'interrupts' property. Optional properties: diff --git a/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-mx.txt b/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-mx.txt new file mode 100644 index 0000000000000000000000000000000000000000..d4de980e55fa61392fa8293f52a966ca362aaa92 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-mx.txt @@ -0,0 +1,18 @@ +* Xtensa Interrupt Distributor and Programmable Interrupt Controller (MX) + +Required properties: +- compatible: Should be "cdns,xtensa-mx". + +Remaining properties have exact same meaning as in Xtensa PIC +(see cdns,xtensa-pic.txt). + +Examples: + pic: pic { + compatible = "cdns,xtensa-mx"; + /* one cell: internal irq number, + * two cells: second cell == 0: internal irq number + * second cell == 1: external irq number + */ + #interrupt-cells = <2>; + interrupt-controller; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-pic.txt new file mode 100644 index 0000000000000000000000000000000000000000..026ef4cfc1d52f895a2d8d0736b8f110b56a314b --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-pic.txt @@ -0,0 +1,25 @@ +* Xtensa built-in Programmable Interrupt Controller (PIC) + +Required properties: +- compatible: Should be "cdns,xtensa-pic". +- interrupt-controller: Identifies the node as an interrupt controller. +- #interrupt-cells: The number of cells to define the interrupts. + It may be either 1 or 2. + When it's 1, the first cell is the internal IRQ number. + When it's 2, the first cell is the IRQ number, and the second cell + specifies whether it's internal (0) or external (1). + Periferals are usually connected to a fixed external IRQ, but for different + core variants it may be mapped to different internal IRQ. + IRQ sensitivity and priority are fixed for each core variant and may not be + changed at runtime. + +Examples: + pic: pic { + compatible = "cdns,xtensa-pic"; + /* one cell: internal irq number, + * two cells: second cell == 0: internal irq number + * second cell == 1: external irq number + */ + #interrupt-cells = <2>; + interrupt-controller; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt index 5a65478e5d40dd050d943d3b419088e615925e1b..aae4c384ee1f2047836876ef8e1ff609e3a5770e 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt @@ -27,8 +27,13 @@ Optional properties: Required properties for timer sub-node: - compatible : Should be "mti,gic-timer". - interrupts : Interrupt for the GIC local timer. + +Optional properties for timer sub-node: +- clocks : GIC timer operating clock. - clock-frequency : Clock frequency at which the GIC timers operate. +Note that one of clocks or clock-frequency must be specified. + Example: gic: interrupt-controller@1bdc0000 { diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt index 34811c57db6950c2ef68bf8a28eb5ffd35994934..747c53805eecf8e12bff3c18992d0c2a3f48e83b 100644 --- a/Documentation/devicetree/bindings/leds/common.txt +++ b/Documentation/devicetree/bindings/leds/common.txt @@ -14,8 +14,10 @@ Optional properties for child nodes: - led-sources : List of device current outputs the LED is connected to. The outputs are identified by the numbers that must be defined in the LED device binding documentation. -- label : The label for this LED. If omitted, the label is - taken from the node name (excluding the unit address). +- label : The label for this LED. If omitted, the label is taken from the node + name (excluding the unit address). It has to uniquely identify + a device, i.e. no other LED class device can be assigned the same + label. - linux,default-trigger : This parameter, if present, is a string defining the trigger assigned to the LED. Current triggers are: diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt index f77148f372ea2b5f986a96e25078c515889b48a3..fea1ebfe24a9573f2023b9ada78cec925d35e799 100644 --- a/Documentation/devicetree/bindings/leds/leds-gpio.txt +++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt @@ -26,16 +26,18 @@ LED sub-node properties: Examples: +#include + leds { compatible = "gpio-leds"; hdd { label = "IDE Activity"; - gpios = <&mcu_pio 0 1>; /* Active low */ + gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "ide-disk"; }; fault { - gpios = <&mcu_pio 1 0>; + gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>; /* Keep LED on if BIOS detected hardware fault */ default-state = "keep"; }; @@ -44,11 +46,11 @@ leds { run-control { compatible = "gpio-leds"; red { - gpios = <&mpc8572 6 0>; + gpios = <&mpc8572 6 GPIO_ACTIVE_HIGH>; default-state = "off"; }; green { - gpios = <&mpc8572 7 0>; + gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; @@ -57,7 +59,7 @@ leds { compatible = "gpio-leds"; charger-led { - gpios = <&gpio1 2 0>; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "max8903-charger-charging"; retain-state-suspended; }; diff --git a/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt b/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt new file mode 100644 index 0000000000000000000000000000000000000000..a85a964d61f5a05cd7b8a47fb5a5cc8ff85aef9a --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt @@ -0,0 +1,43 @@ +Binding for Qualcomm PM8941 WLED driver + +Required properties: +- compatible: should be "qcom,pm8941-wled" +- reg: slave address + +Optional properties: +- label: The label for this led + See Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger: Default trigger assigned to the LED + See Documentation/devicetree/bindings/leds/common.txt +- qcom,cs-out: bool; enable current sink output +- qcom,cabc: bool; enable content adaptive backlight control +- qcom,ext-gen: bool; use externally generated modulator signal to dim +- qcom,current-limit: mA; per-string current limit; value from 0 to 25 + default: 20mA +- qcom,current-boost-limit: mA; boost current limit; one of: + 105, 385, 525, 805, 980, 1260, 1400, 1680 + default: 805mA +- qcom,switching-freq: kHz; switching frequency; one of: + 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, + 1600, 1920, 2400, 3200, 4800, 9600, + default: 1600kHz +- qcom,ovp: V; Over-voltage protection limit; one of: + 27, 29, 32, 35 + default: 29V +- qcom,num-strings: #; number of led strings attached; value from 1 to 3 + default: 2 + +Example: + +pm8941-wled@d800 { + compatible = "qcom,pm8941-wled"; + reg = <0xd800>; + label = "backlight"; + + qcom,cs-out; + qcom,current-limit = <20>; + qcom,current-boost-limit = <805>; + qcom,switching-freq = <1600>; + qcom,ovp = <29>; + qcom,num-strings = <2>; +}; diff --git a/Documentation/devicetree/bindings/mailbox/arm-mhu.txt b/Documentation/devicetree/bindings/mailbox/arm-mhu.txt new file mode 100644 index 0000000000000000000000000000000000000000..4971f03f0b3307d2a39f81276cf4037ba070c942 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/arm-mhu.txt @@ -0,0 +1,43 @@ +ARM MHU Mailbox Driver +====================== + +The ARM's Message-Handling-Unit (MHU) is a mailbox controller that has +3 independent channels/links to communicate with remote processor(s). + MHU links are hardwired on a platform. A link raises interrupt for any +received data. However, there is no specified way of knowing if the sent +data has been read by the remote. This driver assumes the sender polls +STAT register and the remote clears it after having read the data. +The last channel is specified to be a 'Secure' resource, hence can't be +used by Linux running NS. + +Mailbox Device Node: +==================== + +Required properties: +-------------------- +- compatible: Shall be "arm,mhu" & "arm,primecell" +- reg: Contains the mailbox register address range (base + address and length) +- #mbox-cells Shall be 1 - the index of the channel needed. +- interrupts: Contains the interrupt information corresponding to + each of the 3 links of MHU. + +Example: +-------- + + mhu: mailbox@2b1f0000 { + #mbox-cells = <1>; + compatible = "arm,mhu", "arm,primecell"; + reg = <0 0x2b1f0000 0x1000>; + interrupts = <0 36 4>, /* LP-NonSecure */ + <0 35 4>, /* HP-NonSecure */ + <0 37 4>; /* Secure */ + clocks = <&clock 0 2 1>; + clock-names = "apb_pclk"; + }; + + mhu_client: scb@2e000000 { + compatible = "fujitsu,mb86s70-scb-1.0"; + reg = <0 0x2e000000 0x4000>; + mboxes = <&mhu 1>; /* HP-NonSecure */ + }; diff --git a/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt b/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt index bf52ed4a5067de5c9d825f77865321112ec5a651..4ef45636ebdedd538bef484a94705b720aceda66 100644 --- a/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt +++ b/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt @@ -4,7 +4,7 @@ Required properties: - compatible : should be one of: "samsung,s5pv210-jpeg", "samsung,exynos4210-jpeg", - "samsung,exynos3250-jpeg"; + "samsung,exynos3250-jpeg", "samsung,exynos5420-jpeg"; - reg : address and length of the JPEG codec IP register set; - interrupts : specifies the JPEG codec IP interrupt; - clock-names : should contain: diff --git a/Documentation/devicetree/bindings/media/i2c/mt9v032.txt b/Documentation/devicetree/bindings/media/i2c/mt9v032.txt new file mode 100644 index 0000000000000000000000000000000000000000..202565313e825fe897e03a05849fa54765efe2fe --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/mt9v032.txt @@ -0,0 +1,39 @@ +* Aptina 1/3-Inch WVGA CMOS Digital Image Sensor + +The Aptina MT9V032 is a 1/3-inch CMOS active pixel digital image sensor with +an active array size of 752H x 480V. It is programmable through a simple +two-wire serial interface. + +Required Properties: + +- compatible: value should be either one among the following + (a) "aptina,mt9v022" for MT9V022 color sensor + (b) "aptina,mt9v022m" for MT9V022 monochrome sensor + (c) "aptina,mt9v024" for MT9V024 color sensor + (d) "aptina,mt9v024m" for MT9V024 monochrome sensor + (e) "aptina,mt9v032" for MT9V032 color sensor + (f) "aptina,mt9v032m" for MT9V032 monochrome sensor + (g) "aptina,mt9v034" for MT9V034 color sensor + (h) "aptina,mt9v034m" for MT9V034 monochrome sensor + +Optional Properties: + +- link-frequencies: List of allowed link frequencies in Hz. Each frequency is + expressed as a 64-bit big-endian integer. + +For further reading on port node refer to +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + + mt9v032@5c { + compatible = "aptina,mt9v032"; + reg = <0x5c>; + + port { + mt9v032_out: endpoint { + link-frequencies = /bits/ 64 + <13000000 26600000 27000000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/ov2640.txt b/Documentation/devicetree/bindings/media/i2c/ov2640.txt new file mode 100644 index 0000000000000000000000000000000000000000..c429b5bdcaa05ef7486965814b5e55820f9d2dc3 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ov2640.txt @@ -0,0 +1,46 @@ +* Omnivision OV2640 CMOS sensor + +The Omnivision OV2640 sensor support multiple resolutions output, such as +CIF, SVGA, UXGA. It also can support YUV422/420, RGB565/555 or raw RGB +output format. + +Required Properties: +- compatible: should be "ovti,ov2640" +- clocks: reference to the xvclk input clock. +- clock-names: should be "xvclk". + +Optional Properties: +- resetb-gpios: reference to the GPIO connected to the resetb pin, if any. +- pwdn-gpios: reference to the GPIO connected to the pwdn pin, if any. + +The device node must contain one 'port' child node for its digital output +video port, in accordance with the video interface bindings defined in +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + + i2c1: i2c@f0018000 { + ov2640: camera@0x30 { + compatible = "ovti,ov2640"; + reg = <0x30>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck1 &pinctrl_ov2640_pwdn &pinctrl_ov2640_resetb>; + + resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>; + pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; + + clocks = <&pck1>; + clock-names = "xvclk"; + + assigned-clocks = <&pck1>; + assigned-clock-rates = <25000000>; + + port { + ov2640_0: endpoint { + remote-endpoint = <&isi_0>; + bus-width = <8>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/ov2659.txt b/Documentation/devicetree/bindings/media/i2c/ov2659.txt new file mode 100644 index 0000000000000000000000000000000000000000..cabc7d827dfbc3a08f5c03e55c2228b584995f43 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ov2659.txt @@ -0,0 +1,38 @@ +* OV2659 1/5-Inch 2Mp SOC Camera + +The Omnivision OV2659 is a 1/5-inch SOC camera, with an active array size of +1632H x 1212V. It is programmable through a SCCB. The OV2659 sensor supports +multiple resolutions output, such as UXGA, SVGA, 720p. It also can support +YUV422, RGB565/555 or raw RGB output formats. + +Required Properties: +- compatible: Must be "ovti,ov2659" +- reg: I2C slave address +- clocks: reference to the xvclk input clock. +- clock-names: should be "xvclk". +- link-frequencies: target pixel clock frequency. + +For further reading on port node refer to +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + + i2c0@1c22000 { + ... + ... + ov2659@30 { + compatible = "ovti,ov2659"; + reg = <0x30>; + + clocks = <&clk_ov2659 0>; + clock-names = "xvclk"; + + port { + ov2659_0: endpoint { + remote-endpoint = <&vpfe_ep>; + link-frequencies = /bits/ 64 <70000000>; + }; + }; + }; + ... + }; diff --git a/Documentation/devicetree/bindings/media/ti,omap3isp.txt b/Documentation/devicetree/bindings/media/ti,omap3isp.txt new file mode 100644 index 0000000000000000000000000000000000000000..ac23de8556412c52710f46c3ea015d2976c96dad --- /dev/null +++ b/Documentation/devicetree/bindings/media/ti,omap3isp.txt @@ -0,0 +1,71 @@ +OMAP 3 ISP Device Tree bindings +=============================== + +The DT definitions can be found in include/dt-bindings/media/omap3-isp.h. + +Required properties +=================== + +compatible : must contain "ti,omap3-isp" + +reg : the two registers sets (physical address and length) for the + ISP. The first set contains the core ISP registers up to + the end of the SBL block. The second set contains the + CSI PHYs and receivers registers. +interrupts : the ISP interrupt specifier +iommus : phandle and IOMMU specifier for the IOMMU that serves the ISP +syscon : the phandle and register offset to the Complex I/O or CSI-PHY + register +ti,phy-type : 0 -- OMAP3ISP_PHY_TYPE_COMPLEX_IO (e.g. 3430) + 1 -- OMAP3ISP_PHY_TYPE_CSIPHY (e.g. 3630) +#clock-cells : Must be 1 --- the ISP provides two external clocks, + cam_xclka and cam_xclkb, at indices 0 and 1, + respectively. Please find more information on common + clock bindings in ../clock/clock-bindings.txt. + +Port nodes (optional) +--------------------- + +More documentation on these bindings is available in +video-interfaces.txt in the same directory. + +reg : The interface: + 0 - parallel (CCDC) + 1 - CSIPHY1 -- CSI2C / CCP2B on 3630; + CSI1 -- CSIb on 3430 + 2 - CSIPHY2 -- CSI2A / CCP2B on 3630; + CSI2 -- CSIa on 3430 + +Optional properties +=================== + +vdd-csiphy1-supply : voltage supply of the CSI-2 PHY 1 +vdd-csiphy2-supply : voltage supply of the CSI-2 PHY 2 + +Endpoint nodes +-------------- + +lane-polarities : lane polarity (required on CSI-2) + 0 -- not inverted; 1 -- inverted +data-lanes : an array of data lanes from 1 to 3. The length can + be either 1 or 2. (required on CSI-2) +clock-lanes : the clock lane (from 1 to 3). (required on CSI-2) + + +Example +======= + + isp@480bc000 { + compatible = "ti,omap3-isp"; + reg = <0x480bc000 0x12fc + 0x480bd800 0x0600>; + interrupts = <24>; + iommus = <&mmu_isp>; + syscon = <&scm_conf 0x2f0>; + ti,phy-type = ; + #clock-cells = <1>; + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt index 571b4c60665f72939aa7ef956e301ee49c13facc..9cd2a369125d440cb393582c1b7d0f253ef25d06 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.txt +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt @@ -106,6 +106,12 @@ Optional endpoint properties - link-frequencies: Allowed data bus frequencies. For MIPI CSI-2, for instance, this is the actual frequency of the bus, not bits per clock per lane value. An array of 64-bit unsigned integers. +- lane-polarities: an array of polarities of the lanes starting from the clock + lane and followed by the data lanes in the same order as in data-lanes. + Valid values are 0 (normal) and 1 (inverted). The length of the array + should be the combined length of data-lanes and clock-lanes properties. + If the lane-polarities property is omitted, the value must be interpreted + as 0 (normal). This property is valid for serial busses only. Example diff --git a/Documentation/devicetree/bindings/media/xilinx/video.txt b/Documentation/devicetree/bindings/media/xilinx/video.txt new file mode 100644 index 0000000000000000000000000000000000000000..cbd46fa0988fe10274b62bbfa537febe805c236b --- /dev/null +++ b/Documentation/devicetree/bindings/media/xilinx/video.txt @@ -0,0 +1,35 @@ +DT bindings for Xilinx video IP cores +------------------------------------- + +Xilinx video IP cores process video streams by acting as video sinks and/or +sources. They are connected by links through their input and output ports, +creating a video pipeline. + +Each video IP core is represented by an AMBA bus child node in the device +tree using bindings documented in this directory. Connections between the IP +cores are represented as defined in ../video-interfaces.txt. + +The whole pipeline is represented by an AMBA bus child node in the device +tree using bindings documented in ./xlnx,video.txt. + +Common properties +----------------- + +The following properties are common to all Xilinx video IP cores. + +- xlnx,video-format: This property represents a video format transmitted on an + AXI bus between video IP cores, using its VF code as defined in "AXI4-Stream + Video IP and System Design Guide" [UG934]. How the format relates to the IP + core is decribed in the IP core bindings documentation. + +- xlnx,video-width: This property qualifies the video format with the sample + width expressed as a number of bits per pixel component. All components must + use the same width. + +- xlnx,cfa-pattern: When the video format is set to Mono/Sensor, this property + describes the sensor's color filter array pattern. Supported values are + "bggr", "gbrg", "grbg", "rggb" and "mono". If not specified, the pattern + defaults to "mono". + + +[UG934] http://www.xilinx.com/support/documentation/ip_documentation/axi_videoip/v1_0/ug934_axi_videoIP.pdf diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,v-tc.txt b/Documentation/devicetree/bindings/media/xilinx/xlnx,v-tc.txt new file mode 100644 index 0000000000000000000000000000000000000000..2aed3b4a6cf1ac8a73cc81e861b8ec5c1d7fe74d --- /dev/null +++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,v-tc.txt @@ -0,0 +1,33 @@ +Xilinx Video Timing Controller (VTC) +------------------------------------ + +The Video Timing Controller is a general purpose video timing generator and +detector. + +Required properties: + + - compatible: Must be "xlnx,v-tc-6.1". + + - reg: Physical base address and length of the registers set for the device. + + - clocks: Must contain a clock specifier for the VTC core and timing + interfaces clock. + +Optional properties: + + - xlnx,detector: The VTC has a timing detector + - xlnx,generator: The VTC has a timing generator + + At least one of the xlnx,detector and xlnx,generator properties must be + specified. + + +Example: + + vtc: vtc@43c40000 { + compatible = "xlnx,v-tc-6.1"; + reg = <0x43c40000 0x10000>; + + clocks = <&clkc 15>; + xlnx,generator; + }; diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,v-tpg.txt b/Documentation/devicetree/bindings/media/xilinx/xlnx,v-tpg.txt new file mode 100644 index 0000000000000000000000000000000000000000..9dd86b3db937720899aacfd5fb65fef8eb5be194 --- /dev/null +++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,v-tpg.txt @@ -0,0 +1,71 @@ +Xilinx Video Test Pattern Generator (TPG) +----------------------------------------- + +Required properties: + +- compatible: Must contain at least one of + + "xlnx,v-tpg-5.0" (TPG version 5.0) + "xlnx,v-tpg-6.0" (TPG version 6.0) + + TPG versions backward-compatible with previous versions should list all + compatible versions in the newer to older order. + +- reg: Physical base address and length of the registers set for the device. + +- clocks: Reference to the video core clock. + +- xlnx,video-format, xlnx,video-width: Video format and width, as defined in + video.txt. + +- port: Video port, using the DT bindings defined in ../video-interfaces.txt. + The TPG has a single output port numbered 0. + +Optional properties: + +- xlnx,vtc: A phandle referencing the Video Timing Controller that generates + video timings for the TPG test patterns. + +- timing-gpios: Specifier for a GPIO that controls the timing mux at the TPG + input. The GPIO active level corresponds to the selection of VTC-generated + video timings. + +The xlnx,vtc and timing-gpios properties are mandatory when the TPG is +synthesized with two ports and forbidden when synthesized with one port. + +Example: + + tpg_0: tpg@40050000 { + compatible = "xlnx,v-tpg-6.0", "xlnx,v-tpg-5.0"; + reg = <0x40050000 0x10000>; + clocks = <&clkc 15>; + + xlnx,vtc = <&vtc_3>; + timing-gpios = <&ps7_gpio_0 55 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + xlnx,video-format = ; + xlnx,video-width = <8>; + + tpg_in: endpoint { + remote-endpoint = <&adv7611_out>; + }; + }; + port@1 { + reg = <1>; + + xlnx,video-format = ; + xlnx,video-width = <8>; + + tpg1_out: endpoint { + remote-endpoint = <&switch_in0>; + }; + }: + }; + }; diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,video.txt b/Documentation/devicetree/bindings/media/xilinx/xlnx,video.txt new file mode 100644 index 0000000000000000000000000000000000000000..5a022702360857d371240d59d0decbfc80861eda --- /dev/null +++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,video.txt @@ -0,0 +1,55 @@ +Xilinx Video IP Pipeline (VIPP) +------------------------------- + +General concept +--------------- + +Xilinx video IP pipeline processes video streams through one or more Xilinx +video IP cores. Each video IP core is represented as documented in video.txt +and IP core specific documentation, xlnx,v-*.txt, in this directory. The DT +node of the VIPP represents as a top level node of the pipeline and defines +mappings between DMAs and the video IP cores. + +Required properties: + +- compatible: Must be "xlnx,video". + +- dmas, dma-names: List of one DMA specifier and identifier string (as defined + in Documentation/devicetree/bindings/dma/dma.txt) per port. Each port + requires a DMA channel with the identifier string set to "port" followed by + the port index. + +- ports: Video port, using the DT bindings defined in ../video-interfaces.txt. + +Required port properties: + +- direction: should be either "input" or "output" depending on the direction + of stream. + +Example: + + video_cap { + compatible = "xlnx,video"; + dmas = <&vdma_1 1>, <&vdma_3 1>; + dma-names = "port0", "port1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + direction = "input"; + vcap0_in0: endpoint { + remote-endpoint = <&scaler0_out>; + }; + }; + port@1 { + reg = <1>; + direction = "input"; + vcap0_in1: endpoint { + remote-endpoint = <&switch_out1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt b/Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt new file mode 100644 index 0000000000000000000000000000000000000000..f936b5589b1953030adc2563c88555398a49e839 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt @@ -0,0 +1,75 @@ +* Ingenic JZ4780 NAND/external memory controller (NEMC) + +This file documents the device tree bindings for the NEMC external memory +controller in Ingenic JZ4780 + +Required properties: +- compatible: Should be set to one of: + "ingenic,jz4780-nemc" (JZ4780) +- reg: Should specify the NEMC controller registers location and length. +- clocks: Clock for the NEMC controller. +- #address-cells: Must be set to 2. +- #size-cells: Must be set to 1. +- ranges: A set of ranges for each bank describing the physical memory layout. + Each should specify the following 4 integer values: + + 0 + +Each child of the NEMC node describes a device connected to the NEMC. + +Required child node properties: +- reg: Should contain at least one register specifier, given in the following + format: + + + + Multiple registers can be specified across multiple banks. This is needed, + for example, for packaged NAND devices with multiple dies. Such devices + should be grouped into a single node. + +Optional child node properties: +- ingenic,nemc-bus-width: Specifies the bus width in bits. Defaults to 8 bits. +- ingenic,nemc-tAS: Address setup time in nanoseconds. +- ingenic,nemc-tAH: Address hold time in nanoseconds. +- ingenic,nemc-tBP: Burst pitch time in nanoseconds. +- ingenic,nemc-tAW: Access wait time in nanoseconds. +- ingenic,nemc-tSTRV: Static memory recovery time in nanoseconds. + +If a child node references multiple banks in its "reg" property, the same value +for all optional parameters will be configured for all banks. If any optional +parameters are omitted, they will be left unchanged from whatever they are +configured to when the NEMC device is probed (which may be the reset value as +given in the hardware reference manual, or a value configured by the boot +loader). + +Example (NEMC node with a NAND child device attached at CS1): + +nemc: nemc@13410000 { + compatible = "ingenic,jz4780-nemc"; + reg = <0x13410000 0x10000>; + + #address-cells = <2>; + #size-cells = <1>; + + ranges = <1 0 0x1b000000 0x1000000 + 2 0 0x1a000000 0x1000000 + 3 0 0x19000000 0x1000000 + 4 0 0x18000000 0x1000000 + 5 0 0x17000000 0x1000000 + 6 0 0x16000000 0x1000000>; + + clocks = <&cgu JZ4780_CLK_NEMC>; + + nand: nand@1 { + compatible = "ingenic,jz4780-nand"; + reg = <1 0 0x1000000>; + + ingenic,nemc-tAS = <10>; + ingenic,nemc-tAH = <5>; + ingenic,nemc-tBP = <10>; + ingenic,nemc-tAW = <15>; + ingenic,nemc-tSTRV = <100>; + + ... + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index 7bd1273f571a40fa46b7c5c0540a4fe7c9370c4a..7665aa95979f0b57d8036c51e3b4a0fa71807d1a 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -8,6 +8,7 @@ Required properties: - compatible : One of the following chip-specific strings: "wlf,wm5102" "wlf,wm5110" + "wlf,wm8280" "wlf,wm8997" - reg : I2C slave address when connected using I2C, chip select number when using SPI. @@ -26,21 +27,27 @@ Required properties: - #gpio-cells : Must be 2. The first cell is the pin number and the second cell is used to specify optional parameters (currently unused). - - AVDD-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply (wm5102, wm5110), - CPVDD-supply, SPKVDDL-supply (wm5102, wm5110), SPKVDDR-supply (wm5102, - wm5110), SPKVDD-supply (wm8997) : Power supplies for the device, as covered - in Documentation/devicetree/bindings/regulator/regulator.txt + - AVDD-supply, DBVDD1-supply, CPVDD-supply : Power supplies for the device, + as covered in Documentation/devicetree/bindings/regulator/regulator.txt + + - DBVDD2-supply, DBVDD3-supply : Additional databus power supplies (wm5102, + wm5110, wm8280) + + - SPKVDDL-supply, SPKVDDR-supply : Speaker driver power supplies (wm5102, + wm5110, wm8280) + + - SPKVDD-supply : Speaker driver power supply (wm8997) Optional properties: - wlf,reset : GPIO specifier for the GPIO controlling /RESET - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA - - wlf,gpio-defaults : A list of GPIO configuration register values. If - absent, no configuration of these registers is performed. If any - entry has a value that is out of range for a 16 bit register then - the chip default will be used. If present exactly five values must - be specified. + - wlf,gpio-defaults : A list of GPIO configuration register values. Defines + for the appropriate values can found in . If + absent, no configuration of these registers is performed. If any entry has + a value that is out of range for a 16 bit register then the chip default + will be used. If present exactly five values must be specified. - wlf,inmode : A list of INn_MODE register values, where n is the number of input signals. Valid values are 0 (Differential), 1 (Single-ended) and @@ -49,6 +56,12 @@ Optional properties: input singals. If values less than the number of input signals, elements that has not been specifed are set to 0 by default. + - wlf,dmic-ref : DMIC reference voltage source for each input, can be + selected from either MICVDD or one of the MICBIAS's, defines + (ARIZONA_DMIC_xxxx) are provided in . If + present, the number of values should be less than or equal to the + number of inputs, unspecified inputs will use the chip default. + - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if they are being externally supplied. As covered in Documentation/devicetree/bindings/regulator/regulator.txt @@ -73,10 +86,10 @@ codec: wm5102@1a { #gpio-cells = <2>; wlf,gpio-defaults = < - 0x00000000 /* AIF1TXLRCLK */ - 0xffffffff - 0xffffffff - 0xffffffff - 0xffffffff + ARIZONA_GP_FN_TXLRCLK + ARIZONA_GP_DEFAULT + ARIZONA_GP_DEFAULT + ARIZONA_GP_DEFAULT + ARIZONA_GP_DEFAULT >; }; diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt new file mode 100644 index 0000000000000000000000000000000000000000..98685f291a720f4be59a8d1ff6070721fe1220b2 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -0,0 +1,96 @@ +AXP202/AXP209 device tree bindings + +The axp20x family current members : +axp202 (X-Powers) +axp209 (X-Powers) + +Required properties: +- compatible: "x-powers,axp202" or "x-powers,axp209" +- reg: The I2C slave address for the AXP chip +- interrupt-parent: The parent interrupt controller +- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin +- interrupt-controller: axp20x has its own internal IRQs +- #interrupt-cells: Should be set to 1 + +Optional properties: +- x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz + (range: 750-1875). Default: 1.5MHz +- -supply: a phandle to the regulator supply node. May be omitted if + inputs are unregulated, such as using the IPSOUT output + from the PMIC. + +- regulators: A node that houses a sub-node for each regulator. Regulators + not used but preferred to be managed by the OS should be + listed as well. + See Documentation/devicetree/bindings/regulator/regulator.txt + for more information on standard regulator bindings. + +Optional properties for DCDC regulators: +- x-powers,dcdc-workmode: 1 for PWM mode, 0 for AUTO (PWM/PFM) mode + Default: Current hardware setting + The DCDC regulators work in a mixed PWM/PFM mode, + using PFM under light loads and switching to PWM + for heavier loads. Forcing PWM mode trades efficiency + under light loads for lower output noise. This + probably makes sense for HiFi audio related + applications that aren't battery constrained. + + +AXP202/AXP209 regulators, type, and corresponding input supply names: + +Regulator Type Supply Name Notes +--------- ---- ----------- ----- +DCDC2 : DC-DC buck : vin2-supply +DCDC3 : DC-DC buck : vin3-supply +LDO1 : LDO : acin-supply : always on +LDO2 : LDO : ldo24in-supply : shared supply +LDO3 : LDO : ldo3in-supply +LDO4 : LDO : ldo24in-supply : shared supply +LDO5 : LDO : ldo5in-supply + +Example: + +axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + + regulators { + x-powers,dcdc-freq = <1500>; + + vdd_cpu: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; + }; + + vdd_int_dll: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; + }; + + vdd_rtc: ldo1 { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-rtc"; + }; + + avcc: ldo2 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; + }; + + ldo3 { + /* unused but preferred to be managed by OS */ + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/bcm590xx.txt b/Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt similarity index 100% rename from Documentation/devicetree/bindings/mfd/bcm590xx.txt rename to Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt diff --git a/Documentation/devicetree/bindings/mfd/da9150.txt b/Documentation/devicetree/bindings/mfd/da9150.txt new file mode 100644 index 0000000000000000000000000000000000000000..d0588eaa0d714d6b55958ad79f257a9d97fa9b5b --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/da9150.txt @@ -0,0 +1,43 @@ +Dialog Semiconductor DA9150 Combined Charger/Fuel-Gauge MFD bindings + +DA9150 consists of a group of sub-devices: + +Device Description +------ ----------- +da9150-gpadc : General Purpose ADC +da9150-charger : Battery Charger + +====== + +Required properties: +- compatible : Should be "dlg,da9150" +- reg: Specifies the I2C slave address +- interrupt-parent: Specifies the phandle of the interrupt controller to which + the IRQs from da9150 are delivered to. +- interrupts: IRQ line info for da9150 chip. +- interrupt-controller: da9150 has internal IRQs (own IRQ domain). + (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for + further information relating to interrupt properties) + +Sub-devices: +- da9150-gpadc: See Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt +- da9150-charger: See Documentation/devicetree/bindings/power/da9150-charger.txt + + +Example: + + charger_fg: da9150@58 { + compatible = "dlg,da9150"; + reg = <0x58>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + gpadc: da9150-gpadc { + ... + }; + + da9150-charger { + ... + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt new file mode 100644 index 0000000000000000000000000000000000000000..15043e6526990c3ae4c2dba184f215fe7f85ec22 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt @@ -0,0 +1,70 @@ +MediaTek MT6397 Multifunction Device Driver + +MT6397 is a multifunction device with the following sub modules: +- Regulator +- RTC +- Audio codec +- GPIO +- Clock + +It is interfaced to host controller using SPI interface by a proprietary hardware +called PMIC wrapper or pwrap. MT6397 MFD is a child device of pwrap. +See the following for pwarp node definitions: +Documentation/devicetree/bindings/soc/pwrap.txt + +This document describes the binding for MFD device and its sub module. + +Required properties: +compatible: "mediatek,mt6397" + +Optional subnodes: + +- rtc + Required properties: + - compatible: "mediatek,mt6397-rtc" +- regulators + Required properties: + - compatible: "mediatek,mt6397-regulator" + see Documentation/devicetree/bindings/regulator/mt6397-regulator.txt +- codec + Required properties: + - compatible: "mediatek,mt6397-codec" +- clk + Required properties: + - compatible: "mediatek,mt6397-clk" + +Example: + pwrap: pwrap@1000f000 { + compatible = "mediatek,mt8135-pwrap"; + + ... + + pmic { + compatible = "mediatek,mt6397"; + + codec: mt6397codec { + compatible = "mediatek,mt6397-codec"; + }; + + regulators { + compatible = "mediatek,mt6397-regulator"; + + mt6397_vpca15_reg: buck_vpca15 { + regulator-compatible = "buck_vpca15"; + regulator-name = "vpca15"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vgp4_reg: ldo_vgp4 { + regulator-compatible = "ldo_vgp4"; + regulator-name = "vgp4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt index 7182b8857f57f39889a3afaec5b2366bc6f40050..6ac06c1b9aec8908095c0b2fc22af1882334293c 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt @@ -15,10 +15,21 @@ each. A function can consume one or more of these fixed-size register regions. Required properties: - compatible: Should contain one of: - "qcom,pm8941" - "qcom,pm8841" - "qcom,pma8084" - or generalized "qcom,spmi-pmic". + "qcom,pm8941", + "qcom,pm8841", + "qcom,pma8084", + "qcom,pm8019", + "qcom,pm8226", + "qcom,pm8110", + "qcom,pma8084", + "qcom,pmi8962", + "qcom,pmd9635", + "qcom,pm8994", + "qcom,pmi8994", + "qcom,pm8916", + "qcom,pm8004", + "qcom,pm8909", + or generalized "qcom,spmi-pmic". - reg: Specifies the SPMI USID slave address for this device. For more information see: Documentation/devicetree/bindings/spmi/spmi.txt diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt b/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt new file mode 100644 index 0000000000000000000000000000000000000000..e90519d566a30a1a3ca2c003f15660d84b32a792 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt @@ -0,0 +1,22 @@ +QCOM Top Control and Status Register + +Qualcomm devices have a set of registers that provide various control and status +functions for their peripherals. This node is intended to allow access to these +registers via syscon. + +Required properties: +- compatible: Should contain: + "qcom,tcsr-ipq8064", "syscon" for IPQ8064 + "qcom,tcsr-apq8064", "syscon" for APQ8064 + "qcom,tcsr-msm8660", "syscon" for MSM8660 + "qcom,tcsr-msm8960", "syscon" for MSM8960 + "qcom,tcsr-msm8974", "syscon" for MSM8974 + "qcom,tcsr-apq8084", "syscon" for APQ8084 + "qcom,tcsr-msm8916", "syscon" for MSM8916 +- reg: Address range for TCSR registers + +Example: + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-msm8960", "syscon"; + reg = <0x1a400000 0x100>; + }; diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt index 85e31980017aa9e0730410b020130c0b941c0755..5e97a9593ad71bbca2c1edf3199cbf53fb7ff45f 100644 --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt @@ -12,6 +12,7 @@ frequencies. "qcom,rpm-apq8064" "qcom,rpm-msm8660" "qcom,rpm-msm8960" + "qcom,rpm-ipq8064" - reg: Usage: required @@ -31,16 +32,6 @@ frequencies. Value type: Definition: must be the three strings "ack", "err" and "wakeup", in order -- #address-cells: - Usage: required - Value type: - Definition: must be 1 - -- #size-cells: - Usage: required - Value type: - Definition: must be 0 - - qcom,ipc: Usage: required Value type: @@ -52,6 +43,188 @@ frequencies. - u32 representing the ipc bit within the register += SUBNODES + +The RPM exposes resources to its subnodes. The below bindings specify the set +of valid subnodes that can operate on these resources. + +== Regulators + +Regulator nodes are identified by their compatible: + +- compatible: + Usage: required + Value type: + Definition: must be one of: + "qcom,rpm-pm8058-regulators" + "qcom,rpm-pm8901-regulators" + "qcom,rpm-pm8921-regulators" + +- vdd_l0_l1_lvs-supply: +- vdd_l2_l11_l12-supply: +- vdd_l3_l4_l5-supply: +- vdd_l6_l7-supply: +- vdd_l8-supply: +- vdd_l9-supply: +- vdd_l10-supply: +- vdd_l13_l16-supply: +- vdd_l14_l15-supply: +- vdd_l17_l18-supply: +- vdd_l19_l20-supply: +- vdd_l21-supply: +- vdd_l22-supply: +- vdd_l23_l24_l25-supply: +- vdd_ncp-supply: +- vdd_s0-supply: +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: + Usage: optional (pm8058 only) + Value type: + Definition: reference to regulator supplying the input pin, as + described in the data sheet + +- lvs0_in-supply: +- lvs1_in-supply: +- lvs2_in-supply: +- lvs3_in-supply: +- mvs_in-supply: +- vdd_l0-supply: +- vdd_l1-supply: +- vdd_l2-supply: +- vdd_l3-supply: +- vdd_l4-supply: +- vdd_l5-supply: +- vdd_l6-supply: +- vdd_s0-supply: +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: + Usage: optional (pm8901 only) + Value type: + Definition: reference to regulator supplying the input pin, as + described in the data sheet + +- vdd_l1_l2_l12_l18-supply: +- vdd_l3_l15_l17-supply: +- vdd_l4_l14-supply: +- vdd_l5_l8_l16-supply: +- vdd_l6_l7-supply: +- vdd_l9_l11-supply: +- vdd_l10_l22-supply: +- vdd_l21_l23_l29-supply: +- vdd_l24-supply: +- vdd_l25-supply: +- vdd_l26-supply: +- vdd_l27-supply: +- vdd_l28-supply: +- vdd_ncp-supply: +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s4-supply: +- vdd_s5-supply: +- vdd_s6-supply: +- vdd_s7-supply: +- vdd_s8-supply: +- vin_5vs-supply: +- vin_lvs1_3_6-supply: +- vin_lvs2-supply: +- vin_lvs4_5_7-supply: + Usage: optional (pm8921 only) + Value type: + Definition: reference to regulator supplying the input pin, as + described in the data sheet + +The regulator node houses sub-nodes for each regulator within the device. Each +sub-node is identified using the node's name, with valid values listed for each +of the pmics below. + +pm8058: + l0, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, + l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, s0, s1, s2, s3, s4, + lvs0, lvs1, ncp + +pm8901: + l0, l1, l2, l3, l4, l5, l6, s0, s1, s2, s3, s4, lvs0, lvs1, lvs2, lvs3, + mvs + +pm8921: + s1, s2, s3, s4, s7, s8, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, + l12, l14, l15, l16, l17, l18, l21, l22, l23, l24, l25, l26, l27, l28, + l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch, + ncp + +The content of each sub-node is defined by the standard binding for regulators - +see regulator.txt - with additional custom properties described below: + +=== Switch-mode Power Supply regulator custom properties + +- bias-pull-down: + Usage: optional + Value type: + Definition: enable pull down of the regulator when inactive + +- qcom,switch-mode-frequency: + Usage: required + Value type: + Definition: Frequency (Hz) of the switch-mode power supply; + must be one of: + 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, + 2740000, 2400000, 2130000, 1920000, 1750000, 1600000, + 1480000, 1370000, 1280000, 1200000 + +- qcom,force-mode: + Usage: optional (default if no other qcom,force-mode is specified) + Value type: + Defintion: indicates that the regulator should be forced to a + particular mode, valid values are: + QCOM_RPM_FORCE_MODE_NONE - do not force any mode + QCOM_RPM_FORCE_MODE_LPM - force into low power mode + QCOM_RPM_FORCE_MODE_HPM - force into high power mode + QCOM_RPM_FORCE_MODE_AUTO - allow regulator to automatically + select its own mode based on + realtime current draw, only for: + pm8921 smps and ftsmps + +- qcom,power-mode-hysteretic: + Usage: optional + Value type: + Definition: select that the power supply should operate in hysteretic + mode, instead of the default pwm mode + +=== Low-dropout regulator custom properties + +- bias-pull-down: + Usage: optional + Value type: + Definition: enable pull down of the regulator when inactive + +- qcom,force-mode: + Usage: optional + Value type: + Defintion: indicates that the regulator should not be forced to any + particular mode, valid values are: + QCOM_RPM_FORCE_MODE_NONE - do not force any mode + QCOM_RPM_FORCE_MODE_LPM - force into low power mode + QCOM_RPM_FORCE_MODE_HPM - force into high power mode + QCOM_RPM_FORCE_MODE_BYPASS - set regulator to use bypass + mode, i.e. to act as a switch + and not regulate, only for: + pm8921 pldo, nldo and nldo1200 + +=== Negative Charge Pump custom properties + +- qcom,switch-mode-frequency: + Usage: required + Value type: + Definition: Frequency (Hz) of the swith mode power supply; + must be one of: + 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, + 2740000, 2400000, 2130000, 1920000, 1750000, 1600000, + 1480000, 1370000, 1280000, 1200000 + = EXAMPLE #include @@ -64,7 +237,28 @@ frequencies. interrupts = <0 19 0>, <0 21 0>, <0 22 0>; interrupt-names = "ack", "err", "wakeup"; - #address-cells = <1>; - #size-cells = <0>; + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + + s1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + + bias-pull-down; + + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + + qcom,force-mode = ; + }; + }; }; diff --git a/Documentation/devicetree/bindings/mfd/sky81452.txt b/Documentation/devicetree/bindings/mfd/sky81452.txt new file mode 100644 index 0000000000000000000000000000000000000000..35181794aa241b7f147dd8e0afdffa9db216e602 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/sky81452.txt @@ -0,0 +1,35 @@ +SKY81452 bindings + +Required properties: +- compatible : Must be "skyworks,sky81452" +- reg : I2C slave address + +Required child nodes: +- backlight : container node for backlight following the binding + in video/backlight/sky81452-backlight.txt +- regulator : container node for regulators following the binding + in regulator/sky81452-regulator.txt + +Example: + + sky81452@2c { + compatible = "skyworks,sky81452"; + reg = <0x2c>; + + backlight { + compatible = "skyworks,sky81452-backlight"; + name = "pwm-backlight"; + led-sources = <0 1 2 3 6>; + skyworks,ignore-pwm; + skyworks,phase-shift; + skyworks,current-limit = <2300>; + }; + + regulator { + lout { + regulator-name = "sky81452-lout"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <8000000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mips/brcm/bcm3384-intc.txt b/Documentation/devicetree/bindings/mips/brcm/bcm3384-intc.txt deleted file mode 100644 index d4e0141d3620368c2e4d3053574be01a438cf76e..0000000000000000000000000000000000000000 --- a/Documentation/devicetree/bindings/mips/brcm/bcm3384-intc.txt +++ /dev/null @@ -1,37 +0,0 @@ -* Interrupt Controller - -Properties: -- compatible: "brcm,bcm3384-intc" - - Compatibility with BCM3384 and possibly other BCM33xx/BCM63xx SoCs. - -- reg: Address/length pairs for each mask/status register set. Length must - be 8. If multiple register sets are specified, the first set will - handle IRQ offsets 0..31, the second set 32..63, and so on. - -- interrupt-controller: This is an interrupt controller. - -- #interrupt-cells: Must be <1>. Just a simple IRQ offset; no level/edge - or polarity configuration is possible with this controller. - -- interrupt-parent: This controller is cascaded from a MIPS CPU HW IRQ, or - from another INTC. - -- interrupts: The IRQ on the parent controller. - -Example: - periph_intc: periph_intc@14e00038 { - compatible = "brcm,bcm3384-intc"; - - /* - * IRQs 0..31: mask reg 0x14e00038, status reg 0x14e0003c - * IRQs 32..63: mask reg 0x14e00340, status reg 0x14e00344 - */ - reg = <0x14e00038 0x8 0x14e00340 0x8>; - - interrupt-controller; - #interrupt-cells = <1>; - - interrupt-parent = <&cpu_intc>; - interrupts = <4>; - }; diff --git a/Documentation/devicetree/bindings/mips/brcm/bmips.txt b/Documentation/devicetree/bindings/mips/brcm/brcm,bmips.txt similarity index 100% rename from Documentation/devicetree/bindings/mips/brcm/bmips.txt rename to Documentation/devicetree/bindings/mips/brcm/brcm,bmips.txt diff --git a/Documentation/devicetree/bindings/mips/brcm/cm-dsl.txt b/Documentation/devicetree/bindings/mips/brcm/cm-dsl.txt deleted file mode 100644 index 8a139cb3c0b5c44018b2fe12ddd9f7b1065abf05..0000000000000000000000000000000000000000 --- a/Documentation/devicetree/bindings/mips/brcm/cm-dsl.txt +++ /dev/null @@ -1,11 +0,0 @@ -* Broadcom cable/DSL platforms - -SoCs: - -Required properties: -- compatible: "brcm,bcm3384", "brcm,bcm33843" - -Boards: - -Required properties: -- compatible: "brcm,bcm93384wvg" diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.txt b/Documentation/devicetree/bindings/mips/brcm/soc.txt new file mode 100644 index 0000000000000000000000000000000000000000..7bab90cc4a7bf45ba42b8492605f8dd41e3ba6d2 --- /dev/null +++ b/Documentation/devicetree/bindings/mips/brcm/soc.txt @@ -0,0 +1,12 @@ +* Broadcom cable/DSL/settop platforms + +Required properties: + +- compatible: "brcm,bcm3384", "brcm,bcm33843" + "brcm,bcm3384-viper", "brcm,bcm33843-viper" + "brcm,bcm6328", "brcm,bcm6368", + "brcm,bcm7125", "brcm,bcm7346", "brcm,bcm7358", "brcm,bcm7360", + "brcm,bcm7362", "brcm,bcm7420", "brcm,bcm7425" + +The experimental -viper variants are for running Linux on the 3384's +BMIPS4355 cable modem CPU instead of the BMIPS5000 application processor. diff --git a/Documentation/devicetree/bindings/mips/img/pistachio.txt b/Documentation/devicetree/bindings/mips/img/pistachio.txt new file mode 100644 index 0000000000000000000000000000000000000000..a736d889c2b87dc619229e9e86b29c9fbc0f9e22 --- /dev/null +++ b/Documentation/devicetree/bindings/mips/img/pistachio.txt @@ -0,0 +1,42 @@ +Imagination Pistachio SoC +========================= + +Required properties: +-------------------- + - compatible: Must include "img,pistachio". + +CPU nodes: +---------- +A "cpus" node is required. Required properties: + - #address-cells: Must be 1. + - #size-cells: Must be 0. +A CPU sub-node is also required for at least CPU 0. Since the topology may +be probed via CPS, it is not necessary to specify secondary CPUs. Required +propertis: + - device_type: Must be "cpu". + - compatible: Must be "mti,interaptiv". + - reg: CPU number. + - clocks: Must include the CPU clock. See ../../clock/clock-bindings.txt for + details on clock bindings. +Example: + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "mti,interaptiv"; + reg = <0>; + clocks = <&clk_core CLK_MIPS>; + }; + }; + + +Boot protocol: +-------------- +In accordance with the MIPS UHI specification[1], the bootloader must pass the +following arguments to the kernel: + - $a0: -2. + - $a1: KSEG0 address of the flattened device-tree blob. + +[1] http://prplfoundation.org/wiki/MIPS_documentation diff --git a/Documentation/devicetree/bindings/misc/smc.txt b/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt similarity index 100% rename from Documentation/devicetree/bindings/misc/smc.txt rename to Documentation/devicetree/bindings/misc/brcm,kona-smc.txt diff --git a/Documentation/devicetree/bindings/misc/lis302.txt b/Documentation/devicetree/bindings/misc/lis302.txt index 6def86f6b053bea992004509bd812c4e56627aed..2a19bff9693fc55a7b61bb45dcf32963bc7f224a 100644 --- a/Documentation/devicetree/bindings/misc/lis302.txt +++ b/Documentation/devicetree/bindings/misc/lis302.txt @@ -46,11 +46,18 @@ Optional properties for all bus drivers: interrupt 2 - st,wakeup-{x,y,z}-{lo,hi}: set wakeup condition on x/y/z axis for upper/lower limit + - st,wakeup-threshold: set wakeup threshold + - st,wakeup2-{x,y,z}-{lo,hi}: set wakeup condition on x/y/z axis for + upper/lower limit for second wakeup + engine. + - st,wakeup2-threshold: set wakeup threshold for second wakeup + engine. - st,highpass-cutoff-hz=: 1, 2, 4 or 8 for 1Hz, 2Hz, 4Hz or 8Hz of highpass cut-off frequency - st,hipass{1,2}-disable: disable highpass 1/2. - st,default-rate=: set the default rate - - st,axis-{x,y,z}=: set the axis to map to the three coordinates + - st,axis-{x,y,z}=: set the axis to map to the three coordinates. + Negative values can be used for inverted axis. - st,{min,max}-limit-{x,y,z} set the min/max limits for x/y/z axis (used by self-test) diff --git a/Documentation/devicetree/bindings/mmc/kona-sdhci.txt b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt similarity index 100% rename from Documentation/devicetree/bindings/mmc/kona-sdhci.txt rename to Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt diff --git a/Documentation/devicetree/bindings/mtd/m25p80.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt similarity index 61% rename from Documentation/devicetree/bindings/mtd/m25p80.txt rename to Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt index 4611aa83531b9f6834797baec0dfa7c961c74d0e..2bee68103b0112ecc106edc25a74a33f69462cc8 100644 --- a/Documentation/devicetree/bindings/mtd/m25p80.txt +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt @@ -3,10 +3,13 @@ Required properties: - #address-cells, #size-cells : Must be present if the device has sub-nodes representing partitions. -- compatible : Should be the manufacturer and the name of the chip. Bear in mind - the DT binding is not Linux-only, but in case of Linux, see the - "spi_nor_ids" table in drivers/mtd/spi-nor/spi-nor.c for the list - of supported chips. +- compatible : May include a device-specific string consisting of the + manufacturer and name of the chip. Bear in mind the DT binding + is not Linux-only, but in case of Linux, see the "m25p_ids" + table in drivers/mtd/devices/m25p80.c for the list of supported + chips. + Must also include "jedec,spi-nor" for any SPI NOR flash that can + be identified by the JEDEC READ ID opcode (0x9F). - reg : Chip-Select number - spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at @@ -22,7 +25,7 @@ Example: flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,m25p80"; + compatible = "spansion,m25p80", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; m25p,fast-read; diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt index de8b517a5521914c6c37df4dc6d250abf2ffb742..4f833e3c4f516e90747865fefb7de633e240f6c3 100644 --- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt +++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt @@ -14,7 +14,7 @@ Optional properties: - marvell,nand-enable-arbiter: Set to enable the bus arbiter - marvell,nand-keep-config: Set to keep the NAND controller config as set by the bootloader - - num-cs: Number of chipselect lines to usw + - num-cs: Number of chipselect lines to use - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false - nand-ecc-strength: number of bits to correct per ECC step diff --git a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt index 0273adb8638ca507af4261b922a42ff5344fbc40..086d6f44c4b976b73b364d491fc290a97b00bf61 100644 --- a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt +++ b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt @@ -21,7 +21,7 @@ Optional properties: - nand-ecc-mode : one of the supported ECC modes ("hw", "hw_syndrome", "soft", "soft_bch" or "none") -see Documentation/devicetree/mtd/nand.txt for generic bindings. +see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings. Examples: diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt index 6151999c5dcae6e31f60dc155b433723550cf693..f55aa280d34f9fae6e25170f41a06e5c13104f06 100644 --- a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt @@ -14,7 +14,11 @@ Required properties for all the ethernet interfaces: - "enet_csr": Ethernet control and status register address space - "ring_csr": Descriptor ring control and status register address space - "ring_cmd": Descriptor ring command register address space -- interrupts: Ethernet main interrupt +- interrupts: Two interrupt specifiers can be specified. + - First is the Rx interrupt. This irq is mandatory. + - Second is the Tx completion interrupt. + This is supported only on SGMII based 1GbE and 10GbE interfaces. +- port-id: Port number (0 or 1) - clocks: Reference to the clock entry. - local-mac-address: MAC address assigned to this device - phy-connection-type: Interface type between ethernet device and PHY device @@ -49,6 +53,7 @@ Example: <0x0 0X10000000 0x0 0X200>; reg-names = "enet_csr", "ring_csr", "ring_cmd"; interrupts = <0x0 0x3c 0x4>; + port-id = <0>; clocks = <&menetclk 0>; local-mac-address = [00 01 73 00 00 01]; phy-connection-type = "rgmii"; diff --git a/Documentation/devicetree/bindings/net/broadcom-sf2.txt b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt similarity index 100% rename from Documentation/devicetree/bindings/net/broadcom-sf2.txt rename to Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt diff --git a/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt similarity index 100% rename from Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt rename to Documentation/devicetree/bindings/net/brcm,bcmgenet.txt diff --git a/Documentation/devicetree/bindings/net/broadcom-systemport.txt b/Documentation/devicetree/bindings/net/brcm,systemport.txt similarity index 100% rename from Documentation/devicetree/bindings/net/broadcom-systemport.txt rename to Documentation/devicetree/bindings/net/brcm,systemport.txt diff --git a/Documentation/devicetree/bindings/net/broadcom-mdio-unimac.txt b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt similarity index 100% rename from Documentation/devicetree/bindings/net/broadcom-mdio-unimac.txt rename to Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt index 3fc360523bc97cf0a7acabf66063932112b2c8d0..41b3f3f864e84d7f6941bb61280870d70ea687b7 100644 --- a/Documentation/devicetree/bindings/net/ethernet.txt +++ b/Documentation/devicetree/bindings/net/ethernet.txt @@ -19,6 +19,12 @@ The following properties are common to the Ethernet controllers: - phy: the same as "phy-handle" property, not recommended for new bindings. - phy-device: the same as "phy-handle" property, not recommended for new bindings. +- rx-fifo-depth: the size of the controller's receive fifo in bytes. This + is used for components that can have configurable receive fifo sizes, + and is useful for determining certain configuration settings such as + flow control thresholds. +- tx-fifo-depth: the size of the controller's transmit fifo in bytes. This + is used for components that can have configurable fifo sizes. Child nodes of the Ethernet controller are typically the individual PHY devices connected via the MDIO bus (sometimes the MDIO bus controller is separate). diff --git a/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt b/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt index d3bbdded4cbe8db90ce49648e95b6476212f27f6..168f1be509126ad2ad77c9e4bdcc4642847226b5 100644 --- a/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt +++ b/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt @@ -6,11 +6,14 @@ Required properties: - spi-max-frequency: maximal bus speed, should be set to 7500000 depends sync or async operation mode - reg: the chipselect index - - interrupts: the interrupt generated by the device + - interrupts: the interrupt generated by the device. Non high-level + can occur deadlocks while handling isr. Optional properties: - reset-gpio: GPIO spec for the rstn pin - sleep-gpio: GPIO spec for the slp_tr pin + - xtal-trim: u8 value for fine tuning the internal capacitance + arrays of xtal pins: 0 = +0 pF, 0xf = +4.5 pF Example: @@ -18,6 +21,7 @@ Example: compatible = "atmel,at86rf231"; spi-max-frequency = <7500000>; reg = <0>; - interrupts = <19 1>; + interrupts = <19 4>; interrupt-parent = <&gpio3>; + xtal-trim = /bits/ 8 <0x06>; }; diff --git a/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt b/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt index 0071883c08d8787f1d9a49d1369a6220527b869f..fb6d49f184edc5b4ef65524ff673fec4ca3a2ba6 100644 --- a/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt +++ b/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt @@ -13,11 +13,15 @@ Required properties: - cca-gpio: GPIO spec for the CCA pin - vreg-gpio: GPIO spec for the VREG pin - reset-gpio: GPIO spec for the RESET pin +Optional properties: + - amplified: include if the CC2520 is connected to a CC2591 amplifier + Example: cc2520@0 { compatible = "ti,cc2520"; reg = <0>; spi-max-frequency = <4000000>; + amplified; pinctrl-names = "default"; pinctrl-0 = <&cc2520_cape_pins>; fifo-gpio = <&gpio1 18 0>; diff --git a/Documentation/devicetree/bindings/net/keystone-netcp.txt b/Documentation/devicetree/bindings/net/keystone-netcp.txt index f9c07710478d9cfe4de4d451bd52774ad06a04c1..d0e6fa38f335fcfa10f0840221bc663e4a5c9f31 100644 --- a/Documentation/devicetree/bindings/net/keystone-netcp.txt +++ b/Documentation/devicetree/bindings/net/keystone-netcp.txt @@ -49,6 +49,7 @@ Required properties: - compatible: Should be "ti,netcp-1.0" - clocks: phandle to the reference clocks for the subsystem. - dma-id: Navigator packet dma instance id. +- ranges: address range of NetCP (includes, Ethernet SS, PA and SA) Optional properties: - reg: register location and the size for the following register @@ -64,10 +65,30 @@ NetCP device properties: Device specification for NetCP sub-modules. 1Gb/10Gb (gbe/xgbe) ethernet switch sub-module specifications. Required properties: - label: Must be "netcp-gbe" for 1Gb & "netcp-xgbe" for 10Gb. +- compatible: Must be one of below:- + "ti,netcp-gbe" for 1GbE on NetCP 1.4 + "ti,netcp-gbe-5" for 1GbE N NetCP 1.5 (N=5) + "ti,netcp-gbe-9" for 1GbE N NetCP 1.5 (N=9) + "ti,netcp-gbe-2" for 1GbE N NetCP 1.5 (N=2) + "ti,netcp-xgbe" for 10 GbE + - reg: register location and the size for the following register regions in the specified order. - - subsystem registers - - serdes registers + - switch subsystem registers + - sgmii port3/4 module registers (only for NetCP 1.4) + - switch module registers + - serdes registers (only for 10G) + + NetCP 1.4 ethss, here is the order + index #0 - switch subsystem registers + index #1 - sgmii port3/4 module registers + index #2 - switch module registers + + NetCP 1.5 ethss 9 port, 5 port and 2 port + index #0 - switch subsystem registers + index #1 - switch module registers + index #2 - serdes registers + - tx-channel: the navigator packet dma channel name for tx. - tx-queue: the navigator queue number associated with the tx dma channel. - interfaces: specification for each of the switch port to be registered as a @@ -120,14 +141,13 @@ Optional properties: Example binding: -netcp: netcp@2090000 { +netcp: netcp@2000000 { reg = <0x2620110 0x8>; reg-names = "efuse"; compatible = "ti,netcp-1.0"; #address-cells = <1>; #size-cells = <1>; - ranges; - + ranges = <0 0x2000000 0xfffff>; clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>; dma-coherent; /* big-endian; */ @@ -137,9 +157,9 @@ netcp: netcp@2090000 { #address-cells = <1>; #size-cells = <1>; ranges; - gbe@0x2090000 { + gbe@90000 { label = "netcp-gbe"; - reg = <0x2090000 0xf00>; + reg = <0x90000 0x300>, <0x90400 0x400>, <0x90800 0x700>; /* enable-ale; */ tx-queue = <648>; tx-channel = <8>; diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index aaa696414f57a1012b5fc18586ce06da6a899309..ba19d671e8081148529368442fa39be451294608 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -2,10 +2,13 @@ Required properties: - compatible: Should be "cdns,[-]{macb|gem}" - Use "cdns,at91sam9260-macb" Atmel at91sam9260 and at91sam9263 SoCs. + Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP + available on sama5d3 SoCs. Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb". Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on the Cadence GEM, or the generic form: "cdns,gem". + Use "cdns,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs. + Use "cdns,sama5d4-gem" for the Gigabit IP available on Atmel sama5d4 SoCs. - reg: Address and length of the register set for the device - interrupts: Should contain macb interrupt - phy-mode: See ethernet.txt file in the same directory. diff --git a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt new file mode 100644 index 0000000000000000000000000000000000000000..5b6cd9b3f628aa3f266e03179f60d1b2447b30b6 --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt @@ -0,0 +1,35 @@ +* NXP Semiconductors NXP NCI NFC Controllers + +Required properties: +- compatible: Should be "nxp,nxp-nci-i2c". +- clock-frequency: I²C work frequency. +- reg: address on the bus +- interrupt-parent: phandle for the interrupt gpio controller +- interrupts: GPIO interrupt to which the chip is connected +- enable-gpios: Output GPIO pin used for enabling/disabling the chip +- firmware-gpios: Output GPIO pin used to enter firmware download mode + +Optional SoC Specific Properties: +- pinctrl-names: Contains only one value - "default". +- pintctrl-0: Specifies the pin control groups used for this controller. + +Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2): + +&i2c2 { + + status = "okay"; + + npc100: npc100@29 { + + compatible = "nxp,nxp-nci-i2c"; + + reg = <0x29>; + clock-frequency = <100000>; + + interrupt-parent = <&gpio1>; + interrupts = <29 GPIO_ACTIVE_HIGH>; + + enable-gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index 8ca65cec52ae8cc25e8231891a159c9525297391..f34fc3c81a755c8a70573c50fa0a5b6dfae96a3c 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -35,15 +35,18 @@ Optional properties: - reset-names: Should contain the reset signal name "stmmaceth", if a reset phandle is given - max-frame-size: See ethernet.txt file in the same directory -- clocks: If present, the first clock should be the GMAC main clock, - further clocks may be specified in derived bindings. +- clocks: If present, the first clock should be the GMAC main clock and + the second clock should be peripheral's register interface clock. Further + clocks may be specified in derived bindings. - clock-names: One name for each entry in the clocks property, the - first one should be "stmmaceth". + first one should be "stmmaceth" and the second one should be "pclk". - clk_ptp_ref: this is the PTP reference clock; in case of the PTP is available this clock is used for programming the Timestamp Addend Register. If not passed then the system clock will be used and this is fine on some platforms. - snps,burst_len: The AXI burst lenth value of the AXI BUS MODE register. +- tx-fifo-depth: See ethernet.txt file in the same directory +- rx-fifo-depth: See ethernet.txt file in the same directory Examples: @@ -58,6 +61,8 @@ Examples: phy-mode = "gmii"; snps,multicast-filter-bins = <256>; snps,perfect-filter-entries = <128>; + rx-fifo-depth = <16384>; + tx-fifo-depth = <16384>; clocks = <&clock>; clock-names = "stmmaceth"; }; diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt new file mode 100644 index 0000000000000000000000000000000000000000..2a3d90de18eeaa763f41280d6570fa3c217c9e63 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt @@ -0,0 +1,47 @@ +TI Wilink 6/7/8 (wl12xx/wl18xx) SDIO devices + +This node provides properties for controlling the wilink wireless device. The +node is expected to be specified as a child node to the SDIO controller that +connects the device to the system. + +Required properties: + - compatible: should be one of the following: + * "ti,wl1271" + * "ti,wl1273" + * "ti,wl1281" + * "ti,wl1283" + * "ti,wl1801" + * "ti,wl1805" + * "ti,wl1807" + * "ti,wl1831" + * "ti,wl1835" + * "ti,wl1837" + - interrupts : specifies attributes for the out-of-band interrupt. + +Optional properties: + - interrupt-parent : the phandle for the interrupt controller to which the + device interrupts are connected. + - ref-clock-frequency : ref clock frequency in Hz + - tcxo-clock-frequency : tcxo clock frequency in Hz + +Note: the *-clock-frequency properties assume internal clocks. In case of external +clock, new bindings (for parsing the clock nodes) have to be added. + +Example: + +&mmc3 { + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; + }; +}; diff --git a/Documentation/devicetree/bindings/panel/ampire,am800480r3tmqwa1h.txt b/Documentation/devicetree/bindings/panel/ampire,am800480r3tmqwa1h.txt new file mode 100644 index 0000000000000000000000000000000000000000..83e2cae1cc1b48eb7830e923322fa38f043537d5 --- /dev/null +++ b/Documentation/devicetree/bindings/panel/ampire,am800480r3tmqwa1h.txt @@ -0,0 +1,7 @@ +Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel + +Required properties: +- compatible: should be "ampire,am800480r3tmqwa1h" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/panel/auo,b101ean01.txt b/Documentation/devicetree/bindings/panel/auo,b101ean01.txt new file mode 100644 index 0000000000000000000000000000000000000000..3590b0741619cec0ff7d31b2a6d4b1ff2210cd00 --- /dev/null +++ b/Documentation/devicetree/bindings/panel/auo,b101ean01.txt @@ -0,0 +1,7 @@ +AU Optronics Corporation 10.1" WSVGA TFT LCD panel + +Required properties: +- compatible: should be "auo,b101ean01" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/panel/innolux,at043tn24.txt b/Documentation/devicetree/bindings/panel/innolux,at043tn24.txt new file mode 100644 index 0000000000000000000000000000000000000000..4104226b61bc7a4a08401d34aa27044ff02dd9ad --- /dev/null +++ b/Documentation/devicetree/bindings/panel/innolux,at043tn24.txt @@ -0,0 +1,7 @@ +Innolux AT043TN24 4.3" WQVGA TFT LCD panel + +Required properties: +- compatible: should be "innolux,at043tn24" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/panel/innolux,zj070na-01p.txt b/Documentation/devicetree/bindings/panel/innolux,zj070na-01p.txt new file mode 100644 index 0000000000000000000000000000000000000000..824f87f1526ded4a68ed5bb779d5dd7c15e16f72 --- /dev/null +++ b/Documentation/devicetree/bindings/panel/innolux,zj070na-01p.txt @@ -0,0 +1,7 @@ +Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel + +Required properties: +- compatible: should be "innolux,zj070na-01p" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/panel/ortustech,com43h4m85ulc.txt b/Documentation/devicetree/bindings/panel/ortustech,com43h4m85ulc.txt new file mode 100644 index 0000000000000000000000000000000000000000..de19e9398618b70c5f27adf1debb54927675ffcd --- /dev/null +++ b/Documentation/devicetree/bindings/panel/ortustech,com43h4m85ulc.txt @@ -0,0 +1,7 @@ +OrtusTech COM43H4M85ULC Blanview 3.7" TFT-LCD panel + +Required properties: +- compatible: should be "ortustech,com43h4m85ulc" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/panel/samsung,ltn140at29-301.txt b/Documentation/devicetree/bindings/panel/samsung,ltn140at29-301.txt new file mode 100644 index 0000000000000000000000000000000000000000..e7f969d891cc7c85e97bbe0d5a4b2b4a65687857 --- /dev/null +++ b/Documentation/devicetree/bindings/panel/samsung,ltn140at29-301.txt @@ -0,0 +1,7 @@ +Samsung Electronics 14" WXGA (1366x768) TFT LCD panel + +Required properties: +- compatible: should be "samsung,ltn140at29-301" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/panel/shelly,sca07010-bfn-lnn.txt b/Documentation/devicetree/bindings/panel/shelly,sca07010-bfn-lnn.txt new file mode 100644 index 0000000000000000000000000000000000000000..fc1ea9e26c940a82e4139ad137e2d6729f546b33 --- /dev/null +++ b/Documentation/devicetree/bindings/panel/shelly,sca07010-bfn-lnn.txt @@ -0,0 +1,7 @@ +Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel + +Required properties: +- compatible: should be "shelly,sca07010-bfn-lnn" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/phy/bcm-phy.txt b/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.txt similarity index 100% rename from Documentation/devicetree/bindings/phy/bcm-phy.txt rename to Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.txt diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt new file mode 100644 index 0000000000000000000000000000000000000000..6540ca56be5edac956abf45bb87392ea169b584e --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt @@ -0,0 +1,98 @@ +Broadcom Cygnus GPIO/PINCONF Controller + +Required properties: + +- compatible: + Must be "brcm,cygnus-ccm-gpio", "brcm,cygnus-asiu-gpio", or + "brcm,cygnus-crmu-gpio" + +- reg: + Define the base and range of the I/O address space that contains the Cygnus +GPIO/PINCONF controller registers + +- #gpio-cells: + Must be two. The first cell is the GPIO pin number (within the +controller's pin space) and the second cell is used for the following: + bit[0]: polarity (0 for active high and 1 for active low) + +- gpio-controller: + Specifies that the node is a GPIO controller + +Optional properties: + +- interrupts: + Interrupt ID + +- interrupt-controller: + Specifies that the node is an interrupt controller + +- pinmux: + Specifies the phandle to the IOMUX device, where pins can be individually +muxed to GPIO + +Supported generic PINCONF properties in child nodes: + +- pins: + The list of pins (within the controller's own pin space) that properties +in the node apply to. Pin names are "gpio-" + +- bias-disable: + Disable pin bias + +- bias-pull-up: + Enable internal pull up resistor + +- bias-pull-down: + Enable internal pull down resistor + +- drive-strength: + Valid drive strength values include 2, 4, 6, 8, 10, 12, 14, 16 (mA) + +Example: + gpio_ccm: gpio@1800a000 { + compatible = "brcm,cygnus-ccm-gpio"; + reg = <0x1800a000 0x50>, + <0x0301d164 0x20>; + #gpio-cells = <2>; + gpio-controller; + interrupts = ; + interrupt-controller; + + touch_pins: touch_pins { + pwr: pwr { + pins = "gpio-0"; + drive-strength = <16>; + }; + + event: event { + pins = "gpio-1"; + bias-pull-up; + }; + }; + }; + + gpio_asiu: gpio@180a5000 { + compatible = "brcm,cygnus-asiu-gpio"; + reg = <0x180a5000 0x668>; + #gpio-cells = <2>; + gpio-controller; + interrupts = ; + interrupt-controller; + }; + + /* + * Touchscreen that uses the CCM GPIO 0 and 1 + */ + tsc { + ... + ... + gpio-pwr = <&gpio_ccm 0 0>; + gpio-event = <&gpio_ccm 1 0>; + }; + + /* Bluetooth that uses the ASIU GPIO 5, with polarity inverted */ + bluetooth { + ... + ... + bcm,rfkill-bank-sel = <&gpio_asiu 5 1> + } diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt new file mode 100644 index 0000000000000000000000000000000000000000..3600d5c6c4d7d5372f405fbd4c146e41dfa24071 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt @@ -0,0 +1,132 @@ +Broadcom Cygnus IOMUX Controller + +The Cygnus IOMUX controller supports group based mux configuration. In +addition, certain pins can be muxed to GPIO function individually. + +Required properties: + +- compatible: + Must be "brcm,cygnus-pinmux" + +- reg: + Define the base and range of the I/O address space that contains the Cygnus +IOMUX registers + +Properties in subnodes: + +- function: + The mux function to select + +- groups: + The list of groups to select with a given function + +For more details, refer to +Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + +For example: + + pinmux: pinmux@0x0301d0c8 { + compatible = "brcm,cygnus-pinmux"; + reg = <0x0301d0c8 0x1b0>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_default>; + + i2s0_default: i2s0_default { + mux { + function = "i2s0"; + groups = "i2s0_0_grp", "i2s0_1_grp"; + }; + }; + }; + +List of supported functions and groups in Cygnus: + +"i2s0": "i2s0_0_grp", "i2s0_1_grp" + +"i2s1": "i2s1_0_grp", "i2s1_1_grp" + +"i2s2": "i2s2_0_grp", "i2s2_1_grp", "i2s2_2_grp", "i2s2_3_grp", "i2s2_4_grp" + +"spdif": "spdif_grp" + +"pwm0": "pwm0_grp" + +"pwm1": "pwm1_grp" + +"pwm2": "pwm2_grp" + +"pwm3": "pwm3_grp" + +"pwm4": "pwm4_grp" + +"pwm5": "pwm5_grp" + +"key": "key0_grp", "key1_grp", "key2_grp", "key3_grp", "key4_grp", "key5_grp", +"key6_grp", "key7_grp", "key8_grp", "key9_grp", "key10_grp", "key11_grp", +"key12_grp", "key13_grp", "key14_grp", "key15_grp" + +"audio_dte": "audio_dte0_grp", "audio_dte1_grp", "audio_dte2_grp", "audio_dte3_grp" + +"smart_card0": "smart_card0_grp", "smart_card0_fcb_grp" + +"smart_card1": "smart_card1_grp", "smart_card1_fcb_grp" + +"spi0": "spi0_grp" + +"spi1": "spi1_grp" + +"spi2": "spi2_grp" + +"spi3": "spi3_grp" + +"spi4": "spi4_0_grp", "spi4_1_grp" + +"spi5": "spi5_grp" + +"sw_led0": "sw_led0_0_grp", "sw_led0_1_grp" + +"sw_led1": "sw_led1_grp" + +"sw_led2": "sw_led2_0_grp", "sw_led2_1_grp" + +"d1w": "d1w_grp" + +"lcd": "lcd_grp" + +"sram": "sram_0_grp", "sram_1_grp" + +"uart0": "uart0_grp" + +"uart1": "uart1_grp", "uart1_dte_grp" + +"uart2": "uart2_grp" + +"uart3": "uart3_grp" + +"uart4": "uart4_grp" + +"qspi": "qspi_0_grp", "qspi_1_grp" + +"nand": "nand_grp" + +"sdio0": "sdio0_grp", "sdio0_cd_grp", "sdio0_mmc_grp" + +"sdio1": "sdio1_data_0_grp", "sdio1_data_1_grp", "sdio1_cd_grp", +"sdio1_led_grp", "sdio1_mmc_grp" + +"can0": "can0_grp" + +"can1": "can1_grp" + +"cam": "cam_led_grp", "cam_0_grp", "cam_1_grp" + +"bsc1": "bsc1_grp" + +"pcie_clkreq": "pcie_clkreq_grp" + +"usb0_oc": "usb0_oc_grp" + +"usb1_oc": "usb1_oc_grp" + +"usb2_oc": "usb2_oc_grp" diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt new file mode 100644 index 0000000000000000000000000000000000000000..5b1a9dc004f4725a600bc3bf3118fc300654affb --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt @@ -0,0 +1,78 @@ +* Marvell Armada 39x SoC pinctrl driver for mpp + +Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding +part and usage. + +Required properties: +- compatible: "marvell,88f6920-pinctrl", "marvell,88f6928-pinctrl" + depending on the specific variant of the SoC being used. +- reg: register specifier of MPP registers + +Available mpp pins/groups and functions: +Note: brackets (x) are not part of the mpp name for marvell,function and given +only for more detailed description in this document. + +name pins functions +================================================================================ +mpp0 0 gpio, ua0(rxd) +mpp1 1 gpio, ua0(txd) +mpp2 2 gpio, i2c0(sck) +mpp3 3 gpio, i2c0(sda) +mpp4 4 gpio, ua1(txd), ua0(rts), smi(mdc) +mpp5 5 gpio, ua1(rxd), ua0(cts), smi(mdio) +mpp6 6 gpio, dev(cs3), xsmi(mdio) +mpp7 7 gpio, dev(ad9), xsmi(mdc) +mpp8 8 gpio, dev(ad10), ptp(trig) +mpp9 9 gpio, dev(ad11), ptp(clk) +mpp10 10 gpio, dev(ad12), ptp(event) +mpp11 11 gpio, dev(ad13), led(clk) +mpp12 12 gpio, pcie0(rstout), dev(ad14), led(stb) +mpp13 13 gpio, dev(ad15), led(data) +mpp14 14 gpio, m(vtt), dev(wen1), ua1(txd) +mpp15 15 gpio, pcie0(rstout), spi0(mosi), i2c1(sck) +mpp16 16 gpio, m(decc), spi0(miso), i2c1(sda) +mpp17 17 gpio, ua1(rxd), spi0(sck), smi(mdio) +mpp18 18 gpio, ua1(txd), spi0(cs0), i2c2(sck) +mpp19 19 gpio, sata1(present) [1], ua0(cts), ua1(rxd), i2c2(sda) +mpp20 20 gpio, sata0(present) [1], ua0(rts), ua1(txd), smi(mdc) +mpp21 21 gpio, spi0(cs1), sata0(present) [1], sd(cmd), dev(bootcs), ge(rxd0) +mpp22 22 gpio, spi0(mosi), dev(ad0) +mpp23 23 gpio, spi0(sck), dev(ad2) +mpp24 24 gpio, spi0(miso), ua0(cts), ua1(rxd), sd(d4), dev(readyn) +mpp25 25 gpio, spi0(cs0), ua0(rts), ua1(txd), sd(d5), dev(cs0) +mpp26 26 gpio, spi0(cs2), i2c1(sck), sd(d6), dev(cs1) +mpp27 27 gpio, spi0(cs3), i2c1(sda), sd(d7), dev(cs2), ge(txclkout) +mpp28 28 gpio, sd(clk), dev(ad5), ge(txd0) +mpp29 29 gpio, dev(ale0), ge(txd1) +mpp30 30 gpio, dev(oen), ge(txd2) +mpp31 31 gpio, dev(ale1), ge(txd3) +mpp32 32 gpio, dev(wen0), ge(txctl) +mpp33 33 gpio, m(decc), dev(ad3) +mpp34 34 gpio, dev(ad1) +mpp35 35 gpio, ref(clk), dev(a1) +mpp36 36 gpio, dev(a0) +mpp37 37 gpio, sd(d3), dev(ad8), ge(rxclk) +mpp38 38 gpio, ref(clk), sd(d0), dev(ad4), ge(rxd1) +mpp39 39 gpio, i2c1(sck), ua0(cts), sd(d1), dev(a2), ge(rxd2) +mpp40 40 gpio, i2c1(sda), ua0(rts), sd(d2), dev(ad6), ge(rxd3) +mpp41 41 gpio, ua1(rxd), ua0(cts), spi1(cs3), dev(burstn), nd(rbn0), ge(rxctl) +mpp42 42 gpio, ua1(txd), ua0(rts), dev(ad7) +mpp43 43 gpio, pcie0(clkreq), m(vtt), m(decc), spi1(cs2), dev(clkout), nd(rbn1) +mpp44 44 gpio, sata0(present) [1], sata1(present) [1], led(clk) +mpp45 45 gpio, ref(clk), pcie0(rstout), ua1(rxd) +mpp46 46 gpio, ref(clk), pcie0(rstout), ua1(txd), led(stb) +mpp47 47 gpio, sata0(present) [1], sata1(present) [1], led(data) +mpp48 48 gpio, sata0(present) [1], m(vtt), tdm(pclk) [1], audio(mclk) [1], sd(d4), pcie0(clkreq), ua1(txd) +mpp49 49 gpio, tdm(fsync) [1], audio(lrclk) [1], sd(d5), ua2(rxd) +mpp50 50 gpio, pcie0(rstout), tdm(drx) [1], audio(extclk) [1], sd(cmd), ua2(rxd) +mpp51 51 gpio, tdm(dtx) [1], audio(sdo) [1], m(decc), ua2(txd) +mpp52 52 gpio, pcie0(rstout), tdm(intn) [1], audio(sdi) [1], sd(d6), i2c3(sck) +mpp53 53 gpio, sata1(present) [1], sata0(present) [1], tdm(rstn) [1], audio(bclk) [1], sd(d7), i2c3(sda) +mpp54 54 gpio, sata0(present) [1], sata1(present) [1], pcie0(rstout), sd(d3), ua3(txd) +mpp55 55 gpio, ua1(cts), spi1(cs1), sd(d0), ua1(rxd), ua3(rxd) +mpp56 56 gpio, ua1(rts), m(decc), spi1(mosi), ua1(txd) +mpp57 57 gpio, spi1(sck), sd(clk), ua1(txd) +mpp58 58 gpio, i2c1(sck), pcie2(clkreq), spi1(miso), sd(d1), ua1(rxd) +mpp59 59 gpio, pcie0(rstout), i2c1(sda), spi1(cs0), sd(d2) + +[1]: only available on 88F6928 diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt index 17e7240c6998791d81a3683bad27e26f2d00e5c2..3f6a524cc5ffce28dddb0f2d9e0717098ec6a5a9 100644 --- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt @@ -1,7 +1,7 @@ == Amlogic Meson pinmux controller == Required properties for the root node: - - compatible: "amlogic,meson8-pinctrl" + - compatible: "amlogic,meson8-pinctrl" or "amlogic,meson8b-pinctrl" - reg: address and size of registers controlling irq functionality === GPIO sub-nodes === diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt new file mode 100644 index 0000000000000000000000000000000000000000..a62d82d5fbe927e8206fe3d3e5a6b34c54fae6a6 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt @@ -0,0 +1,166 @@ +NVIDIA Tegra210 pinmux controller + +Required properties: +- compatible: "nvidia,tegra210-pinmux" +- reg: Should contain a list of base address and size pairs for: + - first entry: The APB_MISC_GP_*_PADCTRL registers (pad control) + - second entry: The PINMUX_AUX_* registers (pinmux) + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Tegra's pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, tristate, drive strength, etc. + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function or tristate parameter. For this +reason, even seemingly boolean values are actually tristates in this binding: +unspecified, off, or on. Unspecified is represented as an absent property, +and off/on are represented as integer values 0 and 1. + +See the TRM to determine which properties and values apply to each pin/group. +Macro values for property values are defined in +include/dt-binding/pinctrl/pinctrl-tegra.h. + +Required subnode-properties: +- nvidia,pins : An array of strings. Each string contains the name of a pin or + group. Valid values for these names are listed below. + +Optional subnode-properties: +- nvidia,function: A string containing the name of the function to mux to the + pin or group. +- nvidia,pull: Integer, representing the pull-down/up to apply to the pin. + 0: none, 1: down, 2: up. +- nvidia,tristate: Integer. + 0: drive, 1: tristate. +- nvidia,enable-input: Integer. Enable the pin's input path. + enable :TEGRA_PIN_ENABLE0 and + disable or output only: TEGRA_PIN_DISABLE. +- nvidia,open-drain: Integer. + enable: TEGRA_PIN_ENABLE. + disable: TEGRA_PIN_DISABLE. +- nvidia,lock: Integer. Lock the pin configuration against further changes + until reset. + enable: TEGRA_PIN_ENABLE. + disable: TEGRA_PIN_DISABLE. +- nvidia,io-hv: Integer. Select high-voltage receivers. + normal: TEGRA_PIN_DISABLE + high: TEGRA_PIN_ENABLE +- nvidia,high-speed-mode: Integer. Enable high speed mode the pins. + normal: TEGRA_PIN_DISABLE + high: TEGRA_PIN_ENABLE +- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input. + normal: TEGRA_PIN_DISABLE + high: TEGRA_PIN_ENABLE +- nvidia,drive-type: Integer. Valid range 0...3. +- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest. + The range of valid values depends on the pingroup. See "CAL_DRVDN" in the + Tegra TRM. +- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest. + The range of valid values depends on the pingroup. See "CAL_DRVUP" in the + Tegra TRM. +- nvidia,slew-rate-rising: Integer. Controls rising signal slew rate. 0 is + fastest. The range of valid values depends on the pingroup. See + "DRVDN_SLWR" in the Tegra TRM. +- nvidia,slew-rate-falling: Integer. Controls falling signal slew rate. 0 is + fastest. The range of valid values depends on the pingroup. See + "DRVUP_SLWF" in the Tegra TRM. + +Valid values for pin and group names (nvidia,pin) are: + + Mux groups: + + These correspond to Tegra PINMUX_AUX_* (pinmux) registers. Any property + that exists in those registers may be set for the following pin names. + + In Tegra210, many pins also have a dedicated APB_MISC_GP_*_PADCTRL + register. Where that is true, and property that exists in that register + may also be set on the following pin names. + + als_prox_int_px3, ap_ready_pv5, ap_wake_bt_ph3, ap_wake_nfc_ph7, + aud_mclk_pbb0, batt_bcl, bt_rst_ph4, bt_wake_ap_ph5, button_home_py1, + button_power_on_px5, button_slide_sw_py0, button_vol_down_px7, + button_vol_up_px6, cam1_mclk_ps0, cam1_pwdn_ps7, cam1_strobe_pt1, + cam2_mclk_ps1, cam2_pwdn_pt0, cam_af_en_ps5, cam_flash_en_ps6, + cam_i2c_scl_ps2, cam_i2c_sda_ps3, cam_rst_ps4cam_rst_ps4, clk_32k_in, + clk_32k_out_py5, clk_req, core_pwr_req, cpu_pwr_req, dap1_din_pb1, + dap1_dout_pb2, dap1_fs_pb0, dap1_sclk_pb3, dap2_din_paa2, dap2_dout_paa3, + dap2_fs_paa0, dap2_sclk_paa1, dap4_din_pj5, dap4_dout_pj6, dap4_fs_pj4, + dap4_sclk_pj7, dmic1_clk_pe0, dmic1_dat_pe1, dmic2_clk_pe2, dmic2_dat_pe3, + dmic3_clk_pe4, dmic3_dat_pe5, dp_hpd0_pcc6, dvfs_clk_pbb2, dvfs_pwm_pbb1, + gen1_i2c_scl_pj1, gen1_i2c_sda_pj0, gen2_i2c_scl_pj2, gen2_i2c_sda_pj3, + gen3_i2c_scl_pf0, gen3_i2c_sda_pf1, gpio_x1_aud_pbb3, gpio_x3_aud_pbb4, + gps_en_pi2, gps_rst_pi3, hdmi_cec_pcc0, hdmi_int_dp_hpd_pcc1, jtag_rtck, + lcd_bl_en_pv1, lcd_bl_pwm_pv0, lcd_gpio1_pv3, lcd_gpio2_pv4, lcd_rst_pv2, + lcd_te_py2, modem_wake_ap_px0, motion_int_px2, nfc_en_pi0, nfc_int_pi1, + pa6, pcc7, pe6, pe7, pex_l0_clkreq_n_pa1, pex_l0_rst_n_pa0, + pex_l1_clkreq_n_pa4, pex_l1_rst_n_pa3, pex_wake_n_pa2, ph6, pk0, pk1, pk2, + pk3, pk4, pk5, pk6, pk7, pl0, pl1, pwr_i2c_scl_py3, pwr_i2c_sda_py4, + pwr_int_n, pz0, pz1, pz2, pz3, pz4, pz5, qspi_cs_n_pee1, qspi_io0_pee2, + qspi_io1_pee3, qspi_io2_pee4, qspi_io3_pee5, qspi_sck_pee0, + sata_led_active_pa5, sdmmc1_clk_pm0, sdmmc1_cmd_pm1, sdmmc1_dat0_pm5, + sdmmc1_dat1_pm4, sdmmc1_dat2_pm3, sdmmc1_dat3_pm2, sdmmc3_clk_pp0, + sdmmc3_cmd_pp1, sdmmc3_dat0_pp5, sdmmc3_dat1_pp4, sdmmc3_dat2_pp3, + sdmmc3_dat3_pp2, shutdown, spdif_in_pcc3, spdif_out_pcc2, spi1_cs0_pc3, + spi1_cs1_pc4, spi1_miso_pc1, spi1_mosi_pc0, spi1_sck_pc2, spi2_cs0_pb7, + spi2_cs1_pdd0, spi2_miso_pb5, spi2_mosi_pb4, spi2_sck_pb6, spi4_cs0_pc6, + spi4_miso_pd0, spi4_mosi_pc7, spi4_sck_pc5, temp_alert_px4, touch_clk_pv7, + touch_int_px1, touch_rst_pv6, uart1_cts_pu3, uart1_rts_pu2, uart1_rx_pu1, + uart1_tx_pu0, uart2_cts_pg3, uart2_rts_pg2, uart2_rx_pg1, uart2_tx_pg0, + uart3_cts_pd4, uart3_rts_pd3, uart3_rx_pd2, uart3_tx_pd1, uart4_cts_pi7, + uart4_rts_pi6, uart4_rx_pi5, uart4_tx_pi4, usb_vbus_en0_pcc4, + usb_vbus_en1_pcc5, wifi_en_ph0, wifi_rst_ph1, wifi_wake_ap_ph2 + + Drive groups: + + These correspond to the Tegra APB_MISC_GP_*_PADCTRL (pad control) + registers. Note that where one of these registers controls a single pin + for which a PINMUX_AUX_* exists, see the list above for the pin name to + use when configuring the pinmux. + + pa6, pcc7, pe6, pe7, ph6, pk0, pk1, pk2, pk3, pk4, pk5, pk6, pk7, pl0, pl1, + pz0, pz1, pz2, pz3, pz4, pz5, sdmmc1, sdmmc2, sdmmc3, sdmmc4 + +Valid values for nvidia,functions are: + + aud, bcl, blink, ccla, cec, cldvfs, clk, core, cpu, displaya, displayb, + dmic1, dmic2, dmic3, dp, dtv, extperiph3, i2c1, i2c2, i2c3, i2cpmu, i2cvi, + i2s1, i2s2, i2s3, i2s4a, i2s4b, i2s5a, i2s5b, iqc0, iqc1, jtag, pe, pe0, + pe1, pmi, pwm0, pwm1, pwm2, pwm3, qspi, rsvd0, rsvd1, rsvd2, rsvd3, sata, + sdmmc1, sdmmc3, shutdown, soc, sor0, sor1, spdif, spi1, spi2, spi3, spi4, + sys, touch, uart, uarta, uartb, uartc, uartd, usb, vgp1, vgp2, vgp3, vgp4, + vgp5, vgp6, vimclk, vimclk2 + +Example: + + pinmux: pinmux@70000800 { + compatible = "nvidia,tegra210-pinmux"; + reg = <0x0 0x700008d4 0x0 0x2a8>, /* Pad control registers */ + <0x0 0x70003000 0x0 0x1000>; /* Mux registers */ + + pinctrl-names = "boot"; + pinctrl-0 = <&state_boot>; + + state_boot: pinmux { + gen1_i2c_scl_pj1 { + nvidia,pins = "gen1_i2c_scl_pj1", + nvidia,function = "i2c1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,io-hv = ; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index 47d84b6ee91b96a07218afd9fd84ea509334baca..b73c96d24f59247da9d0ecbe51225e6f54271619 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -38,7 +38,7 @@ property exists to define the pin configuration. Each state may also be assigned a name. When names are used, another property exists to map from those names to the integer IDs. -Each client device's own binding determines the set of states the must be +Each client device's own binding determines the set of states that must be defined in its device tree node, and whether to define the set of state IDs that must be provided, or whether to define the set of state names that must be provided. @@ -133,16 +133,27 @@ pin multiplexing nodes: function - the mux function to select groups - the list of groups to select with this function + (either this or "pins" must be specified) +pins - the list of pins to select with this function (either + this or "groups" must be specified) Example: state_0_node_a { - function = "uart0"; - groups = "u0rxtx", "u0rtscts"; + uart0 { + function = "uart0"; + groups = "u0rxtx", "u0rtscts"; + }; }; state_1_node_a { - function = "spi0"; - groups = "spi0pins"; + spi0 { + function = "spi0"; + groups = "spi0pins"; + }; +}; +state_2_node_a { + function = "i2c0"; + pins = "mfio29", "mfio30"; }; == Generic pin configuration node content == @@ -188,16 +199,22 @@ slew-rate - set the slew rate For example: state_0_node_a { - pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ - bias-pull-up; + cts_rxd { + pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ + bias-pull-up; + }; }; state_1_node_a { - pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */ - output-high; + rts_txd { + pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */ + output-high; + }; }; state_2_node_a { - group = "foo-group"; - bias-pull-up; + foo { + group = "foo-group"; + bias-pull-up; + }; }; Some of the generic properties take arguments. For those that do, the diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt new file mode 100644 index 0000000000000000000000000000000000000000..5868a0f7255d2516539c3571999a1e0b7354d8f4 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt @@ -0,0 +1,145 @@ +* Mediatek MT65XX Pin Controller + +The Mediatek's Pin controller is used to control SoC pins. + +Required properties: +- compatible: value should be either of the following. + (a) "mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl. +- mediatek,pctl-regmap: Should be a phandle of the syscfg node. +- pins-are-numbered: Specify the subnodes are using numbered pinmux to + specify pins. +- gpio-controller : Marks the device node as a gpio controller. +- #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO + binding is used, the amount of cells must be specified as 2. See the below + mentioned gpio binding representation for description of particular cells. + + Eg: <&pio 6 0> + <[phandle of the gpio controller node] + [line number within the gpio controller] + [flags]> + + Values for gpio specifier: + - Line number: is a value between 0 to 202. + - Flags: bit field of flags, as defined in . + Only the following flags are supported: + 0 - GPIO_ACTIVE_HIGH + 1 - GPIO_ACTIVE_LOW +- reg: physicall address base for EINT registers +- interrupt-controller: Marks the device node as an interrupt controller +- #interrupt-cells: Should be two. +- interrupts : The interrupt outputs from the controller. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices. + +Subnode format +A pinctrl node should contain at least one subnodes representing the +pinctrl groups available on the machine. Each subnode will list the +pins it needs, and how they should be configured, with regard to muxer +configuration, pullups, drive strength, input enable/disable and input schmitt. + + node { + pinmux = ; + GENERIC_PINCONFIG; + }; + +Required properties: +- pinmux: integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are defined + as macros in boot/dts/-pinfunc.h directly. + +Optional properties: +- GENERIC_PINCONFIG: is the generic pinconfig options to use, bias-disable, + bias-pull-down, bias-pull-up, input-enable, input-disable, output-low, output-high, + input-schmitt-enable, input-schmitt-disable and drive-strength are valid. + + Some special pins have extra pull up strength, there are R0 and R1 pull-up + resistors available, but for user, it's only need to set R1R0 as 00, 01, 10 or 11. + So when config bias-pull-up, it support arguments for those special pins. + Some macros have been defined for this usage, such as MTK_PUPD_SET_R1R0_00. + See dt-bindings/pinctrl/mt65xx.h. + + When config drive-strength, it can support some arguments, such as + MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h. + +Examples: + +#include "mt8135-pinfunc.h" + +... +{ + syscfg_pctl_a: syscfg_pctl_a@10005000 { + compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon"; + reg = <0 0x10005000 0 0x1000>; + }; + + syscfg_pctl_b: syscfg_pctl_b@1020C020 { + compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon"; + reg = <0 0x1020C020 0 0x1000>; + }; + + pinctrl@01c20800 { + compatible = "mediatek,mt8135-pinctrl"; + reg = <0 0x1000B000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>; + pins-are-numbered; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = , + , + ; + + i2c0_pins_a: i2c0@0 { + pins1 { + pinmux = , + ; + bias-disable; + }; + }; + + i2c1_pins_a: i2c1@0 { + pins { + pinmux = , + ; + bias-pull-up = <55>; + }; + }; + + i2c2_pins_a: i2c2@0 { + pins1 { + pinmux = ; + bias-pull-down; + }; + + pins2 { + pinmux = ; + bias-pull-up; + }; + }; + + i2c3_pins_a: i2c3@0 { + pins1 { + pinmux = , + ; + bias-pull-up = <55>; + }; + + pins2 { + pinmux = , + ; + output-low; + bias-pull-up = <55>; + }; + + pins3 { + pinmux = , + ; + drive-strength = <32>; + }; + }; + + ... + } +}; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt index 7ed08048516a9c9815913602fdd1c252689c1315..1ae63c0acd40b2609e173380d6785d7174248525 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt @@ -10,6 +10,7 @@ PMIC's from Qualcomm. "qcom,pm8018-gpio" "qcom,pm8038-gpio" "qcom,pm8058-gpio" + "qcom,pm8916-gpio" "qcom,pm8917-gpio" "qcom,pm8921-gpio" "qcom,pm8941-gpio" @@ -74,6 +75,7 @@ to specify in a pin configuration subnode: gpio1-gpio6 for pm8018 gpio1-gpio12 for pm8038 gpio1-gpio40 for pm8058 + gpio1-gpio4 for pm8916 gpio1-gpio38 for pm8917 gpio1-gpio44 for pm8921 gpio1-gpio36 for pm8941 diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt index 854774b194ed7064bb0c29705fd6f9fcf2af2c34..ed19991aad35e2e5556b39f632c0607e5cdde5b9 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt @@ -8,6 +8,7 @@ of PMIC's from Qualcomm. Value type: Definition: Should contain one of: "qcom,pm8841-mpp", + "qcom,pm8916-mpp", "qcom,pm8941-mpp", "qcom,pma8084-mpp", @@ -67,6 +68,7 @@ to specify in a pin configuration subnode: Definition: List of MPP pins affected by the properties specified in this subnode. Valid pins are: mpp1-mpp4 for pm8841 + mpp1-mpp4 for pm8916 mpp1-mpp8 for pm8941 mpp1-mpp4 for pma8084 diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt new file mode 100644 index 0000000000000000000000000000000000000000..65cc0345747d73f540d6c5a4e8b18acc1618953b --- /dev/null +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt @@ -0,0 +1,59 @@ +Freescale i.MX General Power Controller +======================================= + +The i.MX6Q General Power Control (GPC) block contains DVFS load tracking +counters and Power Gating Control (PGC) for the CPU and PU (GPU/VPU) power +domains. + +Required properties: +- compatible: Should be "fsl,imx6q-gpc" or "fsl,imx6sl-gpc" +- reg: should be register base and length as documented in the + datasheet +- interrupts: Should contain GPC interrupt request 1 +- pu-supply: Link to the LDO regulator powering the PU power domain +- clocks: Clock phandles to devices in the PU power domain that need + to be enabled during domain power-up for reset propagation. +- #power-domain-cells: Should be 1, see below: + +The gpc node is a power-controller as documented by the generic power domain +bindings in Documentation/devicetree/bindings/power/power_domain.txt. + +Example: + + gpc: gpc@020dc000 { + compatible = "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>, + <0 90 IRQ_TYPE_LEVEL_HIGH>; + pu-supply = <®_pu>; + clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>, + <&clks IMX6QDL_CLK_GPU3D_SHADER>, + <&clks IMX6QDL_CLK_GPU2D_CORE>, + <&clks IMX6QDL_CLK_GPU2D_AXI>, + <&clks IMX6QDL_CLK_OPENVG_AXI>, + <&clks IMX6QDL_CLK_VPU_AXI>; + #power-domain-cells = <1>; + }; + + +Specifying power domain for IP modules +====================================== + +IP cores belonging to a power domain should contain a 'power-domains' property +that is a phandle pointing to the gpc device node and a DOMAIN_INDEX specifying +the power domain the device belongs to. + +Example of a device that is part of the PU power domain: + + vpu: vpu@02040000 { + reg = <0x02040000 0x3c000>; + /* ... */ + power-domains = <&gpc 1>; + /* ... */ + }; + +The following DOMAIN_INDEX values are valid for i.MX6Q: +ARM_DOMAIN 0 +PU_DOMAIN 1 +The following additional DOMAIN_INDEX value is valid for i.MX6SL: +DISPLAY_DOMAIN 2 diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt index cc3b1f0a9b1a2b75125a2f98af131ff107f0258b..beda7d2efc304350aa7dc48f2cc6212bfc6ee795 100644 --- a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt +++ b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt @@ -11,6 +11,7 @@ Required properties: - compatible: Should be "renesas,sysc-", "renesas,sysc-rmobile" as fallback. Examples with soctypes are: + - "renesas,sysc-r8a73a4" (R-Mobile APE6) - "renesas,sysc-r8a7740" (R-Mobile A1) - "renesas,sysc-sh73a0" (SH-Mobile AG5) - reg: Two address start and address range blocks for the device: diff --git a/Documentation/devicetree/bindings/pwm/bcm-kona-pwm.txt b/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.txt similarity index 100% rename from Documentation/devicetree/bindings/pwm/bcm-kona-pwm.txt rename to Documentation/devicetree/bindings/pwm/brcm,kona-pwm.txt diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.txt b/Documentation/devicetree/bindings/pwm/imx-pwm.txt index b50d7a6d9d7f88ca00524533981c44726e860d3f..e00c2e9f484dceea28c71df05461f0e61336f6ec 100644 --- a/Documentation/devicetree/bindings/pwm/imx-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/imx-pwm.txt @@ -1,10 +1,17 @@ Freescale i.MX PWM controller Required properties: -- compatible: should be "fsl,-pwm" +- compatible : should be "fsl,-pwm" and one of the following + compatible strings: + - "fsl,imx1-pwm" for PWM compatible with the one integrated on i.MX1 + - "fsl,imx27-pwm" for PWM compatible with the one integrated on i.MX27 - reg: physical base address and length of the controller's registers - #pwm-cells: should be 2. See pwm.txt in this directory for a description of the cells format. +- clocks : Clock specifiers for both ipg and per clocks. +- clock-names : Clock names should include both "ipg" and "per" +See the clock consumer binding, + Documentation/devicetree/bindings/clock/clock-bindings.txt - interrupts: The interrupt for the pwm controller Example: @@ -13,5 +20,8 @@ pwm1: pwm@53fb4000 { #pwm-cells = <2>; compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; reg = <0x53fb4000 0x4000>; + clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, + <&clks IMX5_CLK_PWM1_HF_GATE>; + clock-names = "ipg", "per"; interrupts = <61>; }; diff --git a/Documentation/devicetree/bindings/arm/bcm/kona-resetmgr.txt b/Documentation/devicetree/bindings/reset/brcm,bcm21664-resetmgr.txt similarity index 100% rename from Documentation/devicetree/bindings/arm/bcm/kona-resetmgr.txt rename to Documentation/devicetree/bindings/reset/brcm,bcm21664-resetmgr.txt diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt new file mode 100644 index 0000000000000000000000000000000000000000..be789685a1c24256e8b9846121ccb407d9f39e94 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt @@ -0,0 +1,30 @@ +Abracon ABX80X I2C ultra low power RTC/Alarm chip + +The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801, +ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805 +is the superset of ab180x. + +Required properties: + + - "compatible": should one of: + "abracon,abx80x" + "abracon,ab0801" + "abracon,ab0803" + "abracon,ab0804" + "abracon,ab0805" + "abracon,ab1801" + "abracon,ab1803" + "abracon,ab1804" + "abracon,ab1805" + Using "abracon,abx80x" will enable chip autodetection. + - "reg": I2C bus address of the device + +Optional properties: + +The abx804 and abx805 have a trickle charger that is able to charge the +connected battery or supercap. Both the following properties have to be defined +and valid to enable charging: + + - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V) + - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output + resistor, the other values are in ohm. diff --git a/Documentation/devicetree/bindings/rtc/digicolor-rtc.txt b/Documentation/devicetree/bindings/rtc/digicolor-rtc.txt new file mode 100644 index 0000000000000000000000000000000000000000..d464986012cd98e6cd8a9bc4c2a8e9066e58b223 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/digicolor-rtc.txt @@ -0,0 +1,17 @@ +Conexant Digicolor Real Time Clock controller + +This binding currently supports the CX92755 SoC. + +Required properties: +- compatible: should be "cnxt,cx92755-rtc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: rtc alarm interrupt + +Example: + + rtc@f0000c30 { + compatible = "cnxt,cx92755-rtc"; + reg = <0xf0000c30 0x18>; + interrupts = <25>; + }; diff --git a/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt index b800070fe6e90e5a2f4d5bceb2c81e92feeb2903..fa6a9422666982b03eb659a2726845a81514d01d 100644 --- a/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt @@ -7,6 +7,11 @@ Required properties: region. - interrupts: rtc alarm interrupt +Optional properties: +- stmp,crystal-freq: override crystal frequency as determined from fuse bits. + Only <32000> and <32768> are possible for the hardware. Use <0> for + "no crystal". + Example: rtc@80056000 { diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt new file mode 100644 index 0000000000000000000000000000000000000000..158b0165e01cb75f2b184bb0fd0e65b759b26307 --- /dev/null +++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt @@ -0,0 +1,34 @@ +* STMicroelectronics SAS. ST33ZP24 TPM SoC + +Required properties: +- compatible: Should be "st,st33zp24-spi". +- spi-max-frequency: Maximum SPI frequency (<= 10000000). + +Optional ST33ZP24 Properties: +- interrupt-parent: phandle for the interrupt gpio controller +- interrupts: GPIO interrupt to which the chip is connected +- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state. +If set, power must be present when the platform is going into sleep/hibernate mode. + +Optional SoC Specific Properties: +- pinctrl-names: Contains only one value - "default". +- pintctrl-0: Specifies the pin control groups used for this controller. + +Example (for ARM-based BeagleBoard xM with ST33ZP24 on SPI4): + +&mcspi4 { + + status = "okay"; + + st33zp24@0 { + + compatible = "st,st33zp24-spi"; + + spi-max-frequency = <10000000>; + + interrupt-parent = <&gpio5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + + lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt index a6391e70a8fd84086b8982a6e3844f59dfb20949..90787aa2e648c55a91df5a71b9b10d7f4f7ae7c7 100644 --- a/Documentation/devicetree/bindings/serial/atmel-usart.txt +++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt @@ -1,9 +1,10 @@ * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) Required properties: -- compatible: Should be "atmel,-usart" +- compatible: Should be "atmel,-usart" or "atmel,-dbgu" The compatible indicated will be the first SoC to support an additional mode or an USART new feature. + For the dbgu UART, use "atmel,-dbgu", "atmel,-usart" - reg: Should contain registers location and length - interrupts: Should contain interrupt - clock-names: tuple listing input clock names. diff --git a/Documentation/devicetree/bindings/serial/bcm63xx-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt similarity index 100% rename from Documentation/devicetree/bindings/serial/bcm63xx-uart.txt rename to Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt index 342eedd1005021f28c34696e1f80b96a4c620d5e..54c2a155c78323a70f9dc66eb62457eba1143232 100644 --- a/Documentation/devicetree/bindings/serial/omap_serial.txt +++ b/Documentation/devicetree/bindings/serial/omap_serial.txt @@ -4,7 +4,27 @@ Required properties: - compatible : should be "ti,omap2-uart" for OMAP2 controllers - compatible : should be "ti,omap3-uart" for OMAP3 controllers - compatible : should be "ti,omap4-uart" for OMAP4 controllers +- reg : address and length of the register space +- interrupts or interrupts-extended : Should contain the uart interrupt + specifier or both the interrupt + controller phandle and interrupt + specifier. - ti,hwmods : Must be "uart", n being the instance number (1-based) Optional properties: - clock-frequency : frequency of the clock input to the UART +- dmas : DMA specifier, consisting of a phandle to the DMA controller + node and a DMA channel number. +- dma-names : "rx" for receive channel, "tx" for transmit channel. + +Example: + + uart4: serial@49042000 { + compatible = "ti,omap3-uart"; + reg = <0x49042000 0x400>; + interrupts = <80>; + dmas = <&sdma 81 &sdma 82>; + dma-names = "tx", "rx"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt new file mode 100644 index 0000000000000000000000000000000000000000..ddeb5b6a53c161c37d1cc849404881d06e901a01 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt @@ -0,0 +1,58 @@ +MediaTek PMIC Wrapper Driver + +This document describes the binding for the MediaTek PMIC wrapper. + +On MediaTek SoCs the PMIC is connected via SPI. The SPI master interface +is not directly visible to the CPU, but only through the PMIC wrapper +inside the SoC. The communication between the SoC and the PMIC can +optionally be encrypted. Also a non standard Dual IO SPI mode can be +used to increase speed. + +IP Pairing + +on MT8135 the pins of some SoC internal peripherals can be on the PMIC. +The signals of these pins are routed over the SPI bus using the pwrap +bridge. In the binding description below the properties needed for bridging +are marked with "IP Pairing". These are optional on SoCs which do not support +IP Pairing + +Required properties in pwrap device node. +- compatible: + "mediatek,mt8135-pwrap" for MT8135 SoCs + "mediatek,mt8173-pwrap" for MT8173 SoCs +- interrupts: IRQ for pwrap in SOC +- reg-names: Must include the following entries: + "pwrap": Main registers base + "pwrap-bridge": bridge base (IP Pairing) +- reg: Must contain an entry for each entry in reg-names. +- reset-names: Must include the following entries: + "pwrap" + "pwrap-bridge" (IP Pairing) +- resets: Must contain an entry for each entry in reset-names. +- clock-names: Must include the following entries: + "spi": SPI bus clock + "wrap": Main module clock +- clocks: Must contain an entry for each entry in clock-names. + +Optional properities: +- pmic: Mediatek PMIC MFD is the child device of pwrap + See the following for child node definitions: + Documentation/devicetree/bindings/mfd/mt6397.txt + +Example: + pwrap: pwrap@1000f000 { + compatible = "mediatek,mt8135-pwrap"; + reg = <0 0x1000f000 0 0x1000>, + <0 0x11017000 0 0x1000>; + reg-names = "pwrap", "pwrap-bridge"; + interrupts = ; + resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>, + <&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>; + reset-names = "pwrap", "pwrap-bridge"; + clocks = <&clk26m>, <&clk26m>; + clock-names = "spi", "wrap"; + + pmic { + compatible = "mediatek,mt6397"; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt index 4ce24d425bf18a42daa14d529165f506e4e3f224..2f5ede39bea2d1d3cffacbcbe0ed103a7d2c708a 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt @@ -6,7 +6,8 @@ configuration settings. The mode setting will govern the input/output mode of the 4 GSBI IOs. Required properties: -- compatible: must contain "qcom,gsbi-v1.0.0" for APQ8064/IPQ8064 +- compatible: Should contain "qcom,gsbi-v1.0.0" +- cell-index: Should contain the GSBI index - reg: Address range for GSBI registers - clocks: required clock - clock-names: must contain "iface" entry @@ -16,6 +17,8 @@ Required properties: Optional properties: - qcom,crci : indicates CRCI MUX value for QUP CRCI ports. Please reference dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values. +- syscon-tcsr: indicates phandle of TCSR syscon node. Required if child uses + dma. Required properties if child node exists: - #address-cells: Must be 1 @@ -39,6 +42,7 @@ Example for APQ8064: gsbi4@16300000 { compatible = "qcom,gsbi-v1.0.0"; + cell-index = <4>; reg = <0x16300000 0x100>; clocks = <&gcc GSBI4_H_CLK>; clock-names = "iface"; @@ -48,22 +52,24 @@ Example for APQ8064: qcom,mode = ; qcom,crci = ; + syscon-tcsr = <&tcsr>; + /* child nodes go under here */ i2c_qup4: i2c@16380000 { - compatible = "qcom,i2c-qup-v1.1.1"; - reg = <0x16380000 0x1000>; - interrupts = <0 153 0>; + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16380000 0x1000>; + interrupts = <0 153 0>; - clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; - clock-names = "core", "iface"; + clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; - clock-frequency = <200000>; + clock-frequency = <200000>; - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; - }; + }; uart4: serial@16340000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; @@ -76,3 +82,7 @@ Example for APQ8064: }; }; + tcsr: syscon@1a400000 { + compatible = "qcom,apq8064-tcsr", "syscon"; + reg = <0x1a400000 0x100>; + }; diff --git a/Documentation/devicetree/bindings/sound/bcm2835-i2s.txt b/Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt similarity index 100% rename from Documentation/devicetree/bindings/sound/bcm2835-i2s.txt rename to Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt diff --git a/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt b/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt index b41433386e2fe5a72f752ec816eb0f70011b6555..b623d50004fb016195d865179ce71b378c8fc98c 100644 --- a/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt +++ b/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt @@ -1,7 +1,7 @@ Ingenic JZ4740 I2S controller Required properties: -- compatible : "ingenic,jz4740-i2s" +- compatible : "ingenic,jz4740-i2s" or "ingenic,jz4780-i2s" - reg : I2S registers location and length - clocks : AIC and I2S PLL clock specifiers. - clock-names: "aic" and "i2s" diff --git a/Documentation/devicetree/bindings/sound/max98925.txt b/Documentation/devicetree/bindings/sound/max98925.txt new file mode 100644 index 0000000000000000000000000000000000000000..27be63e2aa0de08c7160d8e37960d3816800a7ab --- /dev/null +++ b/Documentation/devicetree/bindings/sound/max98925.txt @@ -0,0 +1,22 @@ +max98925 audio CODEC + +This device supports I2C. + +Required properties: + + - compatible : "maxim,max98925" + + - vmon-slot-no : slot number used to send voltage information + + - imon-slot-no : slot number used to send current information + + - reg : the I2C address of the device for I2C + +Example: + +codec: max98925@1a { + compatible = "maxim,max98925"; + vmon-slot-no = <0>; + imon-slot-no = <2>; + reg = <0x1a>; +}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt index c949abc2992f5fd1d8c2e1fcb2eb5a75521037a6..c3495beba35841773cd1ec0c7d3efe1d952d22c4 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt @@ -18,6 +18,7 @@ Required properties: * Headphones * Speakers * Mic Jack + * Int Mic - nvidia,i2s-controller : The phandle of the Tegra I2S controller that's connected to the CODEC. diff --git a/Documentation/devicetree/bindings/sound/omap-twl4030.txt b/Documentation/devicetree/bindings/sound/omap-twl4030.txt index 1ab6bc8404d5bc850dea1fc1533f451b03787e5f..f6a715e4ef43c1e0d7b5402188dbf310795e9caa 100644 --- a/Documentation/devicetree/bindings/sound/omap-twl4030.txt +++ b/Documentation/devicetree/bindings/sound/omap-twl4030.txt @@ -4,9 +4,9 @@ Required properties: - compatible: "ti,omap-twl4030" - ti,model: Name of the sound card (for example "omap3beagle") - ti,mcbsp: phandle for the McBSP node -- ti,codec: phandle for the twl4030 audio node Optional properties: +- ti,codec: phandle for the twl4030 audio node - ti,mcbsp-voice: phandle for the McBSP node connected to the voice port of twl - ti, jack-det-gpio: Jack detect GPIO - ti,audio-routing: List of connections between audio components. @@ -59,5 +59,4 @@ sound { ti,model = "omap3beagle"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt new file mode 100644 index 0000000000000000000000000000000000000000..e00732dac9393e95f0530505c9f38127f58980a3 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt @@ -0,0 +1,43 @@ +* Qualcomm Technologies LPASS CPU DAI + +This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS). + +Required properties: + +- compatible : "qcom,lpass-cpu" +- clocks : Must contain an entry for each entry in clock-names. +- clock-names : A list which must include the following entries: + * "ahbix-clk" + * "mi2s-osr-clk" + * "mi2s-bit-clk" +- interrupts : Must contain an entry for each entry in + interrupt-names. +- interrupt-names : A list which must include the following entries: + * "lpass-irq-lpaif" +- pinctrl-N : One property must exist for each entry in + pinctrl-names. See ../pinctrl/pinctrl-bindings.txt + for details of the property values. +- pinctrl-names : Must contain a "default" entry. +- reg : Must contain an address for each entry in reg-names. +- reg-names : A list which must include the following entries: + * "lpass-lpaif" + +Optional properties: + +- qcom,adsp : Phandle for the audio DSP node + +Example: + +lpass@28100000 { + compatible = "qcom,lpass-cpu"; + clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>; + clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk"; + interrupts = <0 85 1>; + interrupt-names = "lpass-irq-lpaif"; + pinctrl-names = "default", "idle"; + pinctrl-0 = <&mi2s_default>; + pinctrl-1 = <&mi2s_idle>; + reg = <0x28100000 0x10000>; + reg-names = "lpass-lpaif"; + qcom,adsp = <&adsp>; +}; diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index 2dd690bc19cc6436914a1d6ccdf03ed6f36b6c0b..f316ce1f214a03e396750652df9b911ee6df48ea 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -29,9 +29,17 @@ SSI subnode properties: - shared-pin : if shared clock pin - pio-transfer : use PIO transfer mode - no-busif : BUSIF is not ussed when [mem -> SSI] via DMA case +- dma : Should contain Audio DMAC entry +- dma-names : SSI case "rx" (=playback), "tx" (=capture) + SSIU case "rxu" (=playback), "txu" (=capture) SRC subnode properties: -no properties at this point +- dma : Should contain Audio DMAC entry +- dma-names : "rx" (=playback), "tx" (=capture) + +DVC subnode properties: +- dma : Should contain Audio DMAC entry +- dma-names : "tx" (=playback/capture) DAI subnode properties: - playback : list of playback modules @@ -45,56 +53,145 @@ rcar_sound: rcar_sound@ec500000 { reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x1280>; /* SSI */ + <0 0xec541000 0 0x1280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>, + <&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>, + <&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>, + <&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>, + <&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>, + <&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>, + <&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>, + <&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>, + <&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>, + <&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>, + <&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>, + <&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", "src.5", + "src.4", "src.3", "src.2", "src.1", "src.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; rcar_sound,dvc { - dvc0: dvc@0 { }; - dvc1: dvc@1 { }; + dvc0: dvc@0 { + dmas = <&audma0 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc@1 { + dmas = <&audma0 0xbe>; + dma-names = "tx"; + }; }; rcar_sound,src { - src0: src@0 { }; - src1: src@1 { }; - src2: src@2 { }; - src3: src@3 { }; - src4: src@4 { }; - src5: src@5 { }; - src6: src@6 { }; - src7: src@7 { }; - src8: src@8 { }; - src9: src@9 { }; + src0: src@0 { + interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src@1 { + interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src@2 { + interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src@3 { + interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src@4 { + interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src@5 { + interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src@6 { + interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src@7 { + interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src@8 { + interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src@9 { + interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; }; rcar_sound,ssi { ssi0: ssi@0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; }; ssi1: ssi@1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; }; ssi2: ssi@2 { interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; }; ssi3: ssi@3 { interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; }; ssi4: ssi@4 { interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; }; ssi5: ssi@5 { interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; }; ssi6: ssi@6 { interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; }; ssi7: ssi@7 { interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; }; ssi8: ssi@8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; }; ssi9: ssi@9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; }; }; diff --git a/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt b/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt new file mode 100644 index 0000000000000000000000000000000000000000..c64155027288e20105f4741bc66de02951b7c1a3 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt @@ -0,0 +1,67 @@ +Renesas Sampling Rate Convert Sound Card: + +Renesas Sampling Rate Convert Sound Card specifies audio DAI connections of SoC <-> codec. + +Required properties: + +- compatible : "renesas,rsrc-card," + Examples with soctypes are: + - "renesas,rsrc-card,lager" + - "renesas,rsrc-card,koelsch" +Optional properties: + +- card_name : User specified audio sound card name, one string + property. +- cpu : CPU sub-node +- codec : CODEC sub-node + +Optional subnode properties: + +- format : CPU/CODEC common audio format. + "i2s", "right_j", "left_j" , "dsp_a" + "dsp_b", "ac97", "pdm", "msb", "lsb" +- frame-master : Indicates dai-link frame master. + phandle to a cpu or codec subnode. +- bitclock-master : Indicates dai-link bit clock master. + phandle to a cpu or codec subnode. +- bitclock-inversion : bool property. Add this if the + dai-link uses bit clock inversion. +- frame-inversion : bool property. Add this if the + dai-link uses frame clock inversion. +- convert-rate : platform specified sampling rate convert + +Required CPU/CODEC subnodes properties: + +- sound-dai : phandle and port of CPU/CODEC + +Optional CPU/CODEC subnodes properties: + +- clocks / system-clock-frequency : specify subnode's clock if needed. + it can be specified via "clocks" if system has + clock node (= common clock), or "system-clock-frequency" + (if system doens't support common clock) + If a clock is specified, it is + enabled with clk_prepare_enable() + in dai startup() and disabled with + clk_disable_unprepare() in dai + shutdown(). + +Example + +sound { + compatible = "renesas,rsrc-card,lager"; + + card-name = "rsnd-ak4643"; + format = "left_j"; + bitclock-master = <&sndcodec>; + frame-master = <&sndcodec>; + + sndcpu: cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: codec { + sound-dai = <&ak4643>; + system-clock-frequency = <11289600>; + }; +}; diff --git a/Documentation/devicetree/bindings/sound/storm.txt b/Documentation/devicetree/bindings/sound/storm.txt new file mode 100644 index 0000000000000000000000000000000000000000..062a4c185fa9d06d726eccbbcf69a6e566ec0441 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/storm.txt @@ -0,0 +1,23 @@ +* Sound complex for Storm boards + +Models a soundcard for Storm boards with the Qualcomm Technologies IPQ806x SOC +connected to a MAX98357A DAC via I2S. + +Required properties: + +- compatible : "google,storm-audio" +- cpu : Phandle of the CPU DAI +- codec : Phandle of the codec DAI + +Optional properties: + +- qcom,model : The user-visible name of this sound card. + +Example: + +sound { + compatible = "google,storm-audio"; + qcom,model = "ipq806x-storm"; + cpu = <&lpass_cpu>; + codec = <&max98357a>; +}; diff --git a/Documentation/devicetree/bindings/sound/wm8804.txt b/Documentation/devicetree/bindings/sound/wm8804.txt index 4d3a56f38adc31ea6dc24f611c37283fc8898f60..6fd124b1649652dfaac67bf0efbf35f0bade58e4 100644 --- a/Documentation/devicetree/bindings/sound/wm8804.txt +++ b/Documentation/devicetree/bindings/sound/wm8804.txt @@ -10,6 +10,13 @@ Required properties: - reg : the I2C address of the device for I2C, the chip select number for SPI. + - PVDD-supply, DVDD-supply : Power supplies for the device, as covered + in Documentation/devicetree/bindings/regulator/regulator.txt + +Optional properties: + + - wlf,reset-gpio: A GPIO specifier for the GPIO controlling the reset pin + Example: codec: wm8804@1a { diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt index 715d0998af8e2fbce29e16ea7cbc96e391aa6bf2..e16b9b5afc70a139087dea1ca3a64e9989525112 100644 --- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt +++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt @@ -1,6 +1,6 @@ Qualcomm SPMI Controller (PMIC Arbiter) -The SPMI PMIC Arbiter is found on the Snapdragon 800 Series. It is an SPMI +The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI controller with wrapping arbitration logic to allow for multiple on-chip devices to control a single SPMI master. @@ -19,6 +19,10 @@ Required properties: "core" - core registers "intr" - interrupt controller registers "cnfg" - configuration registers + Registers used only for V2 PMIC Arbiter: + "chnls" - tx-channel per virtual slave registers. + "obsrvr" - rx-channel (called observer) per virtual slave registers. + - reg : address + size pairs describing the PMIC arb register sets; order must correspond with the order of entries in reg-names - #address-cells : must be set to 2 diff --git a/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt b/Documentation/devicetree/bindings/timer/brcm,kona-timer.txt similarity index 100% rename from Documentation/devicetree/bindings/arm/bcm/kona-timer.txt rename to Documentation/devicetree/bindings/timer/brcm,kona-timer.txt diff --git a/Documentation/devicetree/bindings/unittest.txt b/Documentation/devicetree/bindings/unittest.txt index 8933211f32f945c70b568d35372342ab3baca3d3..3bf58c20fe94da71ecae272e7d86256bd42f0683 100644 --- a/Documentation/devicetree/bindings/unittest.txt +++ b/Documentation/devicetree/bindings/unittest.txt @@ -1,60 +1,60 @@ -1) OF selftest platform device +1) OF unittest platform device -** selftest +** unittest Required properties: -- compatible: must be "selftest" +- compatible: must be "unittest" All other properties are optional. Example: - selftest { - compatible = "selftest"; + unittest { + compatible = "unittest"; status = "okay"; }; -2) OF selftest i2c adapter platform device +2) OF unittest i2c adapter platform device ** platform device unittest adapter Required properties: -- compatible: must be selftest-i2c-bus +- compatible: must be unittest-i2c-bus -Children nodes contain selftest i2c devices. +Children nodes contain unittest i2c devices. Example: - selftest-i2c-bus { - compatible = "selftest-i2c-bus"; + unittest-i2c-bus { + compatible = "unittest-i2c-bus"; status = "okay"; }; -3) OF selftest i2c device +3) OF unittest i2c device -** I2C selftest device +** I2C unittest device Required properties: -- compatible: must be selftest-i2c-dev +- compatible: must be unittest-i2c-dev All other properties are optional Example: - selftest-i2c-dev { - compatible = "selftest-i2c-dev"; + unittest-i2c-dev { + compatible = "unittest-i2c-dev"; status = "okay"; }; -4) OF selftest i2c mux device +4) OF unittest i2c mux device -** I2C selftest mux +** I2C unittest mux Required properties: -- compatible: must be selftest-i2c-mux +- compatible: must be unittest-i2c-mux -Children nodes contain selftest i2c bus nodes per channel. +Children nodes contain unittest i2c bus nodes per channel. Example: - selftest-i2c-mux { - compatible = "selftest-i2c-mux"; + unittest-i2c-mux { + compatible = "unittest-i2c-mux"; status = "okay"; #address-cells = <1>; #size-cells = <0>; @@ -64,7 +64,7 @@ Example: #size-cells = <0>; i2c-dev { reg = <8>; - compatible = "selftest-i2c-dev"; + compatible = "unittest-i2c-dev"; status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/mips/brcm/usb.txt b/Documentation/devicetree/bindings/usb/brcm,bcm3384-usb.txt similarity index 100% rename from Documentation/devicetree/bindings/mips/brcm/usb.txt rename to Documentation/devicetree/bindings/usb/brcm,bcm3384-usb.txt diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index fae26d014aaf25c83f499889969e1cb017491f34..80339192c93e2626f81eed30fe97ff147c86d746 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -11,18 +11,22 @@ adapteva Adapteva, Inc. adh AD Holdings Plc. adi Analog Devices, Inc. aeroflexgaisler Aeroflex Gaisler AB +al Annapurna Labs allwinner Allwinner Technology Co., Ltd. alphascale AlphaScale Integrated Circuits Systems, Inc. altr Altera Corp. amcc Applied Micro Circuits Corporation (APM, formally AMCC) amd Advanced Micro Devices (AMD), Inc. amlogic Amlogic, Inc. +ampire Ampire Co., Ltd. ams AMS AG amstaos AMS-Taos Inc. apm Applied Micro Circuits Corporation (APM) +aptina Aptina Imaging arasan Arasan Chip Systems arm ARM Ltd. armadeus ARMadeus Systems SARL +artesyn Artesyn Embedded Technologies Inc. asahi-kasei Asahi Kasei Corp. atmel Atmel Corporation auo AU Optronics Corporation @@ -37,6 +41,7 @@ capella Capella Microsystems, Inc cavium Cavium, Inc. cdns Cadence Design Systems Inc. chipidea Chipidea, Inc +chipone ChipOne chipspark ChipSPARK chrp Common Hardware Reference Platform chunghwa Chunghwa Picture Tubes Ltd. @@ -78,7 +83,9 @@ geniatech Geniatech, Inc. giantplus Giantplus Technology Co., Ltd. globalscale Globalscale Technologies, Inc. gmt Global Mixed-mode Technology, Inc. +goodix Shenzhen Huiding Technology Co., Ltd. google Google, Inc. +grinn Grinn gumstix Gumstix, Inc. gw Gateworks Corporation hannstar HannStar Display Corporation @@ -114,6 +121,7 @@ merrii Merrii Technology Co., Ltd. micrel Micrel Inc. microchip Microchip Technology Inc. micron Micron Technology Inc. +minix MINIX Technology Ltd. mitsubishi Mitsubishi Electric Corporation mosaixtech Mosaix Technologies, Inc. moxa Moxa @@ -125,6 +133,7 @@ mxicy Macronix International Co., Ltd. national National Semiconductor neonode Neonode Inc. netgear NETGEAR +netlogic Broadcom Corporation (formerly NetLogic Microsystems) newhaven Newhaven Display International nintendo Nintendo nokia Nokia @@ -132,6 +141,7 @@ nvidia NVIDIA nxp NXP Semiconductors onnn ON Semiconductor Corp. opencores OpenCores.org +ortustech Ortus Technology Co., Ltd. ovti OmniVision Technologies panasonic Panasonic Corporation parade Parade Technologies Inc. @@ -167,6 +177,7 @@ sii Seiko Instruments, Inc. silergy Silergy Corp. sirf SiRF Technology, Inc. sitronix Sitronix Technology Corporation +skyworks Skyworks Solutions, Inc. smsc Standard Microsystems Corporation snps Synopsys, Inc. solidrun SolidRun @@ -194,6 +205,7 @@ voipac Voipac Technologies s.r.o. winbond Winbond Electronics corp. wlf Wolfson Microelectronics wm Wondermedia Technologies, Inc. +x-powers X-Powers xes Extreme Engineering Solutions (X-ES) xillybus Xillybus Ltd. xlnx Xilinx diff --git a/Documentation/devicetree/bindings/video/atmel,lcdc.txt b/Documentation/devicetree/bindings/video/atmel,lcdc.txt index f059dd0b3d286c3adc1e2b42571a2d48de4b641b..ecb8da063d07b82350060ff3ce8f3af9df35a549 100644 --- a/Documentation/devicetree/bindings/video/atmel,lcdc.txt +++ b/Documentation/devicetree/bindings/video/atmel,lcdc.txt @@ -10,7 +10,9 @@ Required properties: "atmel,at91sam9g45es-lcdc" , "atmel,at91sam9rl-lcdc" , "atmel,at32ap-lcdc" -- reg : Should contain 1 register ranges(address and length) +- reg : Should contain 1 register ranges(address and length). + Can contain an additional register range(address and length) + for fixed framebuffer memory. Useful for dedicated memories. - interrupts : framebuffer controller interrupt - display: a phandle pointing to the display node @@ -38,6 +40,14 @@ Example: }; +Example for fixed framebuffer memory: + + fb0: fb@0x00500000 { + compatible = "atmel,at91sam9263-lcdc"; + reg = <0x00700000 0x1000 0x70000000 0x200000>; + [...] + }; + Atmel LCDC Display ----------------------------------------------------- Required properties (as per of_videomode_helper): diff --git a/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt new file mode 100644 index 0000000000000000000000000000000000000000..8bf2940f54bcfc86eaa716485640c92ea3f80021 --- /dev/null +++ b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt @@ -0,0 +1,29 @@ +SKY81452-backlight bindings + +Required properties: +- compatible : Must be "skyworks,sky81452-backlight" + +Optional properties: +- name : Name of backlight device. Default is 'lcd-backlight'. +- gpios : GPIO to use to EN pin. + See Documentation/devicetree/bindings/gpio/gpio.txt +- led-sources : List of enabled channels from 0 to 5. + See Documentation/devicetree/bindings/leds/common.txt +- skyworks,ignore-pwm : Ignore both PWM input +- skyworks,dpwm-mode : Enable DPWM dimming mode, otherwise Analog dimming. +- skyworks,phase-shift : Enable phase shift mode +- skyworks,short-detection-threshold-volt + : It should be one of 4, 5, 6 and 7V. +- skyworks,current-limit-mA + : It should be 2300mA or 2750mA. + +Example: + + backlight { + compatible = "skyworks,sky81452-backlight"; + name = "pwm-backlight"; + led-sources = <0 1 2 5>; + skyworks,ignore-pwm; + skyworks,phase-shift; + skyworks,current-limit-mA = <2300>; + }; diff --git a/Documentation/devicetree/bindings/video/ti,omap-dss.txt b/Documentation/devicetree/bindings/video/ti,omap-dss.txt index d5f1a3fe31092bdceb7b09199157189e3d8eeb5b..e1ef29569338f32d0934f7d560eb881709e67a2e 100644 --- a/Documentation/devicetree/bindings/video/ti,omap-dss.txt +++ b/Documentation/devicetree/bindings/video/ti,omap-dss.txt @@ -25,8 +25,8 @@ Video Ports ----------- The DSS Core and the encoders have video port outputs. The structure of the -video ports is described in Documentation/devicetree/bindings/video/video- -ports.txt, and the properties for the ports and endpoints for each encoder are +video ports is described in Documentation/devicetree/bindings/graph.txt, +and the properties for the ports and endpoints for each encoder are described in the SoC's DSS binding documentation. The video ports are used to describe the connections to external hardware, like diff --git a/Documentation/devicetree/bindings/arm/bcm/kona-wdt.txt b/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.txt similarity index 100% rename from Documentation/devicetree/bindings/arm/bcm/kona-wdt.txt rename to Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.txt diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt index 77685185cf3b77d465a63dd667b794cb57eea7a9..e49e423268c03c2b4e9713e739d2f9fa482c3e25 100644 --- a/Documentation/devicetree/booting-without-of.txt +++ b/Documentation/devicetree/booting-without-of.txt @@ -15,6 +15,7 @@ Table of Contents 1) Entry point for arch/arm 2) Entry point for arch/powerpc 3) Entry point for arch/x86 + 4) Entry point for arch/mips/bmips II - The DT block format 1) Header @@ -288,6 +289,33 @@ it with special cases. or initrd address. It simply holds information which can not be retrieved otherwise like interrupt routing or a list of devices behind an I2C bus. +4) Entry point for arch/mips/bmips +---------------------------------- + + Some bootloaders only support a single entry point, at the start of the + kernel image. Other bootloaders will jump to the ELF start address. + Both schemes are supported; CONFIG_BOOT_RAW=y and CONFIG_NO_EXCEPT_FILL=y, + so the first instruction immediately jumps to kernel_entry(). + + Similar to the arch/arm case (b), a DT-aware bootloader is expected to + set up the following registers: + + a0 : 0 + + a1 : 0xffffffff + + a2 : Physical pointer to the device tree block (defined in chapter + II) in RAM. The device tree can be located anywhere in the first + 512MB of the physical address space (0x00000000 - 0x1fffffff), + aligned on a 64 bit boundary. + + Legacy bootloaders do not use this convention, and they do not pass in a + DT block. In this case, Linux will look for a builtin DTB, selected via + CONFIG_DT_*. + + This convention is defined for 32-bit systems only, as there are not + currently any 64-bit BMIPS implementations. + II - The DT block format ======================== diff --git a/Documentation/devicetree/of_selftest.txt b/Documentation/devicetree/of_unittest.txt similarity index 90% rename from Documentation/devicetree/of_selftest.txt rename to Documentation/devicetree/of_unittest.txt index 57a808b588bffb40162f4f4061fd323727ef5342..3e4e7d48ae93142bd5a1769ec3a9b4f2ffb0a926 100644 --- a/Documentation/devicetree/of_selftest.txt +++ b/Documentation/devicetree/of_unittest.txt @@ -1,11 +1,11 @@ -Open Firmware Device Tree Selftest +Open Firmware Device Tree Unittest ---------------------------------- Author: Gaurav Minocha 1. Introduction -This document explains how the test data required for executing OF selftest +This document explains how the test data required for executing OF unittest is attached to the live tree dynamically, independent of the machine's architecture. @@ -22,31 +22,31 @@ most of the device drivers in various use cases. 2. Test-data -The Device Tree Source file (drivers/of/testcase-data/testcases.dts) contains +The Device Tree Source file (drivers/of/unittest-data/testcases.dts) contains the test data required for executing the unit tests automated in -drivers/of/selftests.c. Currently, following Device Tree Source Include files -(.dtsi) are included in testcase.dts: +drivers/of/unittest.c. Currently, following Device Tree Source Include files +(.dtsi) are included in testcases.dts: -drivers/of/testcase-data/tests-interrupts.dtsi -drivers/of/testcase-data/tests-platform.dtsi -drivers/of/testcase-data/tests-phandle.dtsi -drivers/of/testcase-data/tests-match.dtsi +drivers/of/unittest-data/tests-interrupts.dtsi +drivers/of/unittest-data/tests-platform.dtsi +drivers/of/unittest-data/tests-phandle.dtsi +drivers/of/unittest-data/tests-match.dtsi When the kernel is build with OF_SELFTEST enabled, then the following make rule $(obj)/%.dtb: $(src)/%.dts FORCE $(call if_changed_dep, dtc) -is used to compile the DT source file (testcase.dts) into a binary blob -(testcase.dtb), also referred as flattened DT. +is used to compile the DT source file (testcases.dts) into a binary blob +(testcases.dtb), also referred as flattened DT. After that, using the following rule the binary blob above is wrapped as an -assembly file (testcase.dtb.S). +assembly file (testcases.dtb.S). $(obj)/%.dtb.S: $(obj)/%.dtb $(call cmd, dt_S_dtb) -The assembly file is compiled into an object file (testcase.dtb.o), and is +The assembly file is compiled into an object file (testcases.dtb.o), and is linked into the kernel image. @@ -98,7 +98,7 @@ child11 -> sibling12 -> sibling13 -> sibling14 -> null Figure 1: Generic structure of un-flattened device tree -Before executing OF selftest, it is required to attach the test data to +Before executing OF unittest, it is required to attach the test data to machine's device tree (if present). So, when selftest_data_add() is called, at first it reads the flattened device tree data linked into the kernel image via the following kernel symbols: diff --git a/Documentation/dma-buf-sharing.txt b/Documentation/dma-buf-sharing.txt index bb9753b635a3a5e8d8f794814a83584878b550e5..480c8de3c2c44786174e112795f61b2381d3b09f 100644 --- a/Documentation/dma-buf-sharing.txt +++ b/Documentation/dma-buf-sharing.txt @@ -49,25 +49,26 @@ The dma_buf buffer sharing API usage contains the following steps: The buffer exporter announces its wish to export a buffer. In this, it connects its own private buffer data, provides implementation for operations that can be performed on the exported dma_buf, and flags for the file - associated with this buffer. + associated with this buffer. All these fields are filled in struct + dma_buf_export_info, defined via the DEFINE_DMA_BUF_EXPORT_INFO macro. Interface: - struct dma_buf *dma_buf_export_named(void *priv, struct dma_buf_ops *ops, - size_t size, int flags, - const char *exp_name) + DEFINE_DMA_BUF_EXPORT_INFO(exp_info) + struct dma_buf *dma_buf_export(struct dma_buf_export_info *exp_info) - If this succeeds, dma_buf_export_named allocates a dma_buf structure, and + If this succeeds, dma_buf_export allocates a dma_buf structure, and returns a pointer to the same. It also associates an anonymous file with this buffer, so it can be exported. On failure to allocate the dma_buf object, it returns NULL. - 'exp_name' is the name of exporter - to facilitate information while - debugging. + 'exp_name' in struct dma_buf_export_info is the name of exporter - to + facilitate information while debugging. It is set to KBUILD_MODNAME by + default, so exporters don't have to provide a specific name, if they don't + wish to. + + DEFINE_DMA_BUF_EXPORT_INFO macro defines the struct dma_buf_export_info, + zeroes it out and pre-populates exp_name in it. - Exporting modules which do not wish to provide any specific name may use the - helper define 'dma_buf_export()', with the same arguments as above, but - without the last argument; a KBUILD_MODNAME pre-processor directive will be - inserted in place of 'exp_name' instead. 2. Userspace gets a handle to pass around to potential buffer-users diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index 6d1e8eeb5990363c4441238ef305da3082b94b89..831a5363f6be37756b0016c1c30fc0f46055aff8 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -276,6 +276,7 @@ IOMAP devm_ioport_unmap() devm_ioremap() devm_ioremap_nocache() + devm_ioremap_wc() devm_ioremap_resource() : checks resource, requests memory region, ioremaps devm_iounmap() pcim_iomap() @@ -289,6 +290,10 @@ IRQ devm_request_irq() devm_request_threaded_irq() +LED + devm_led_classdev_register() + devm_led_classdev_unregister() + MDIO devm_mdiobus_alloc() devm_mdiobus_alloc_size() diff --git a/Documentation/email-clients.txt b/Documentation/email-clients.txt index eede6088f978c25f83463b6d741d627b642fbfd8..c7d49b8855593b2a75e263363a9360e905f50773 100644 --- a/Documentation/email-clients.txt +++ b/Documentation/email-clients.txt @@ -211,7 +211,7 @@ Thunderbird (GUI) Thunderbird is an Outlook clone that likes to mangle text, but there are ways to coerce it into behaving. -- Allows use of an external editor: +- Allow use of an external editor: The easiest thing to do with Thunderbird and patches is to use an "external editor" extension and then just use your favorite $EDITOR for reading/merging patches into the body text. To do this, download @@ -219,6 +219,15 @@ to coerce it into behaving. View->Toolbars->Customize... and finally just click on it when in the Compose dialog. + Please note that "external editor" requires that your editor must not + fork, or in other words, the editor must not return before closing. + You may have to pass additional flags or change the settings of your + editor. Most notably if you are using gvim then you must pass the -f + option to gvim by putting "/usr/bin/gvim -f" (if the binary is in + /usr/bin) to the text editor field in "external editor" settings. If you + are using some other editor then please read its manual to find out how + to do this. + To beat some sense out of the internal editor, do this: - Edit your Thunderbird config settings so that it won't use format=flowed. diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index f91926f2f4824dee2c6785dcaf4cedd84df838e9..0a926e2ba3ab68ffd541f5a619cd673e59826821 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -196,7 +196,7 @@ prototypes: void (*invalidatepage) (struct page *, unsigned int, unsigned int); int (*releasepage) (struct page *, int); void (*freepage)(struct page *); - int (*direct_IO)(int, struct kiocb *, struct iov_iter *iter, loff_t offset); + int (*direct_IO)(struct kiocb *, struct iov_iter *iter, loff_t offset); int (*migratepage)(struct address_space *, struct page *, struct page *); int (*launder_page)(struct page *); int (*is_partially_uptodate)(struct page *, unsigned long, unsigned long); @@ -429,8 +429,6 @@ prototypes: loff_t (*llseek) (struct file *, loff_t, int); ssize_t (*read) (struct file *, char __user *, size_t, loff_t *); ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *); - ssize_t (*aio_read) (struct kiocb *, const struct iovec *, unsigned long, loff_t); - ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t); ssize_t (*read_iter) (struct kiocb *, struct iov_iter *); ssize_t (*write_iter) (struct kiocb *, struct iov_iter *); int (*iterate) (struct file *, struct dir_context *); @@ -525,6 +523,7 @@ prototypes: void (*close)(struct vm_area_struct*); int (*fault)(struct vm_area_struct*, struct vm_fault *); int (*page_mkwrite)(struct vm_area_struct *, struct vm_fault *); + int (*pfn_mkwrite)(struct vm_area_struct *, struct vm_fault *); int (*access)(struct vm_area_struct *, unsigned long, void*, int, int); locking rules: @@ -534,6 +533,7 @@ close: yes fault: yes can return with page locked map_pages: yes page_mkwrite: yes can return with page locked +pfn_mkwrite: yes access: yes ->fault() is called when a previously not present pte is about @@ -560,6 +560,12 @@ the page has been truncated, the filesystem should not look up a new page like the ->fault() handler, but simply return with VM_FAULT_NOPAGE, which will cause the VM to retry the fault. + ->pfn_mkwrite() is the same as page_mkwrite but when the pte is +VM_PFNMAP or VM_MIXEDMAP with a page-less entry. Expected return is +VM_FAULT_NOPAGE. Or one of the VM_FAULT_ERROR types. The default behavior +after this call is to make the pte read-write, unless pfn_mkwrite returns +an error. + ->access() is called when get_user_pages() fails in access_process_vm(), typically used to debug a process through /proc/pid/mem or ptrace. This function is needed only for diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.txt index dac11d7fef2744adb2b9ae185f9665b10d761be4..e9e750e59efc50c922122d22ba1ec7ca69775a54 100644 --- a/Documentation/filesystems/f2fs.txt +++ b/Documentation/filesystems/f2fs.txt @@ -140,6 +140,12 @@ nobarrier This option can be used if underlying storage guarantees fastboot This option is used when a system wants to reduce mount time as much as possible, even though normal performance can be sacrificed. +extent_cache Enable an extent cache based on rb-tree, it can cache + as many as extent which map between contiguous logical + address and physical address per inode, resulting in + increasing the cache hit ratio. +noinline_data Disable the inline data feature, inline data feature is + enabled by default. ================================================================================ DEBUGFS ENTRIES diff --git a/Documentation/filesystems/nfs/nfs-rdma.txt b/Documentation/filesystems/nfs/nfs-rdma.txt index 724043858b0834f874aff57df4155f1da3dffad8..95c13aa575ff32eebeb4938f435376ca0595a439 100644 --- a/Documentation/filesystems/nfs/nfs-rdma.txt +++ b/Documentation/filesystems/nfs/nfs-rdma.txt @@ -187,8 +187,10 @@ Check RDMA and NFS Setup To further test the InfiniBand software stack, use IPoIB (this assumes you have two IB hosts named host1 and host2): - host1$ ifconfig ib0 a.b.c.x - host2$ ifconfig ib0 a.b.c.y + host1$ ip link set dev ib0 up + host1$ ip address add dev ib0 a.b.c.x + host2$ ip link set dev ib0 up + host2$ ip address add dev ib0 a.b.c.y host1$ ping a.b.c.y host2$ ping a.b.c.x @@ -229,7 +231,8 @@ NFS/RDMA Setup $ modprobe ib_mthca $ modprobe ib_ipoib - $ ifconfig ib0 a.b.c.d + $ ip li set dev ib0 up + $ ip addr add dev ib0 a.b.c.d NOTE: use unique addresses for the client and server diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting index fa2db081505e6d6d581ea4ee6d8f1eaab56a3482..e69274de8d0c9c1754cc40b8d99d78a724e63e50 100644 --- a/Documentation/filesystems/porting +++ b/Documentation/filesystems/porting @@ -471,3 +471,15 @@ in your dentry operations instead. [mandatory] f_dentry is gone; use f_path.dentry, or, better yet, see if you can avoid it entirely. +-- +[mandatory] + never call ->read() and ->write() directly; use __vfs_{read,write} or + wrappers; instead of checking for ->write or ->read being NULL, look for + FMODE_CAN_{WRITE,READ} in file->f_mode. +-- +[mandatory] + do _not_ use new_sync_{read,write} for ->read/->write; leave it NULL + instead. +-- +[mandatory] + ->aio_read/->aio_write are gone. Use ->read_iter/->write_iter. diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index a07ba61662ed7980409a22f593b4615ec0e19a8d..c3b6b301d8b004778c990e315b6d37250d673223 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -200,12 +200,12 @@ contains details information about the process itself. Its fields are explained in Table 1-4. (for SMP CONFIG users) -For making accounting scalable, RSS related information are handled in -asynchronous manner and the vaule may not be very precise. To see a precise +For making accounting scalable, RSS related information are handled in an +asynchronous manner and the value may not be very precise. To see a precise snapshot of a moment, you can see /proc//smaps file and scan page table. It's slow but very precise. -Table 1-2: Contents of the status files (as of 2.6.30-rc7) +Table 1-2: Contents of the status files (as of 3.20.0) .............................................................................. Field Content Name filename of the executable @@ -213,6 +213,7 @@ Table 1-2: Contents of the status files (as of 2.6.30-rc7) in an uninterruptible wait, Z is zombie, T is traced or stopped) Tgid thread group ID + Ngid NUMA group ID (0 if none) Pid process id PPid process id of the parent process TracerPid PID of process tracing this process (0 if not) @@ -220,6 +221,10 @@ Table 1-2: Contents of the status files (as of 2.6.30-rc7) Gid Real, effective, saved set, and file system GIDs FDSize number of file descriptor slots currently allocated Groups supplementary group list + NStgid descendant namespace thread group ID hierarchy + NSpid descendant namespace process ID hierarchy + NSpgid descendant namespace process group ID hierarchy + NSsid descendant namespace session ID hierarchy VmPeak peak virtual memory size VmSize total program size VmLck locked memory size @@ -1255,9 +1260,9 @@ Various pieces of information about kernel activity are available in the since the system first booted. For a quick look, simply cat the file: > cat /proc/stat - cpu 2255 34 2290 22625563 6290 127 456 0 0 - cpu0 1132 34 1441 11311718 3675 127 438 0 0 - cpu1 1123 0 849 11313845 2614 0 18 0 0 + cpu 2255 34 2290 22625563 6290 127 456 0 0 0 + cpu0 1132 34 1441 11311718 3675 127 438 0 0 0 + cpu1 1123 0 849 11313845 2614 0 18 0 0 0 intr 114930548 113199788 3 0 5 263 0 4 [... lots more numbers ...] ctxt 1990473 btime 1062191376 @@ -1704,6 +1709,10 @@ A typical output is flags: 0100002 mnt_id: 19 +All locks associated with a file descriptor are shown in its fdinfo too. + +lock: 1: FLOCK ADVISORY WRITE 359 00:13:11691 0 EOF + The files such as eventfd, fsnotify, signalfd, epoll among the regular pos/flags pair provide additional information particular to the objects they represent. diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 966b22829f3b605b92f19ce43665225ab17a8a7e..5d833b32bbcd1046de40a15fee169ed462d274fc 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -590,7 +590,7 @@ struct address_space_operations { void (*invalidatepage) (struct page *, unsigned int, unsigned int); int (*releasepage) (struct page *, int); void (*freepage)(struct page *); - ssize_t (*direct_IO)(int, struct kiocb *, struct iov_iter *iter, loff_t offset); + ssize_t (*direct_IO)(struct kiocb *, struct iov_iter *iter, loff_t offset); /* migrate the contents of a page to the specified target */ int (*migratepage) (struct page *, struct page *); int (*launder_page) (struct page *); @@ -804,8 +804,6 @@ struct file_operations { loff_t (*llseek) (struct file *, loff_t, int); ssize_t (*read) (struct file *, char __user *, size_t, loff_t *); ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *); - ssize_t (*aio_read) (struct kiocb *, const struct iovec *, unsigned long, loff_t); - ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t); ssize_t (*read_iter) (struct kiocb *, struct iov_iter *); ssize_t (*write_iter) (struct kiocb *, struct iov_iter *); int (*iterate) (struct file *, struct dir_context *); @@ -838,14 +836,10 @@ otherwise noted. read: called by read(2) and related system calls - aio_read: vectored, possibly asynchronous read - read_iter: possibly asynchronous read with iov_iter as destination write: called by write(2) and related system calls - aio_write: vectored, possibly asynchronous write - write_iter: possibly asynchronous write with iov_iter as source iterate: called when the VFS needs to read the directory contents diff --git a/Documentation/filesystems/xfs.txt b/Documentation/filesystems/xfs.txt index 0bfafe10835772be298d5a3859a1ee31de861f83..5a5a05582b583c42468764fc5a80bf8c126072e6 100644 --- a/Documentation/filesystems/xfs.txt +++ b/Documentation/filesystems/xfs.txt @@ -228,30 +228,19 @@ default behaviour. Deprecated Mount Options ======================== - delaylog/nodelaylog - Delayed logging is the only logging method that XFS supports - now, so these mount options are now ignored. - - Due for removal in 3.12. - - ihashsize=value - In memory inode hashes have been removed, so this option has - no function as of August 2007. Option is deprecated. - - Due for removal in 3.12. +None at present. - irixsgid - This behaviour is now controlled by a sysctl, so the mount - option is ignored. - Due for removal in 3.12. +Removed Mount Options +===================== - osyncisdsync - osyncisosync - O_SYNC and O_DSYNC are fully supported, so there is no need - for these options any more. + Name Removed + ---- ------- + delaylog/nodelaylog v3.20 + ihashsize v3.20 + irixsgid v3.20 + osyncisdsync/osyncisosync v3.20 - Due for removal in 3.12. sysctls ======= diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt index 8b35f51fe7b6a3e8d11a2abc3104913794349cce..b80606de545ad809fb147688060b26b51af4d5e1 100644 --- a/Documentation/gpio/board.txt +++ b/Documentation/gpio/board.txt @@ -50,10 +50,43 @@ gpiod_is_active_low(power) will be true). ACPI ---- -ACPI does not support function names for GPIOs. Therefore, only the "idx" -argument of gpiod_get_index() is useful to discriminate between GPIOs assigned -to a device. The "con_id" argument can still be set for debugging purposes (it -will appear under error messages as well as debug and sysfs nodes). +ACPI also supports function names for GPIOs in a similar fashion to DT. +The above DT example can be converted to an equivalent ACPI description +with the help of _DSD (Device Specific Data), introduced in ACPI 5.1: + + Device (FOO) { + Name (_CRS, ResourceTemplate () { + GpioIo (Exclusive, ..., IoRestrictionOutputOnly, + "\\_SB.GPI0") {15} // red + GpioIo (Exclusive, ..., IoRestrictionOutputOnly, + "\\_SB.GPI0") {16} // green + GpioIo (Exclusive, ..., IoRestrictionOutputOnly, + "\\_SB.GPI0") {17} // blue + GpioIo (Exclusive, ..., IoRestrictionOutputOnly, + "\\_SB.GPI0") {1} // power + }) + + Name (_DSD, Package () { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { + "led-gpios", + Package () { + ^FOO, 0, 0, 1, + ^FOO, 1, 0, 1, + ^FOO, 2, 0, 1, + } + }, + Package () { + "power-gpios", + Package () {^FOO, 3, 0, 0}, + }, + } + }) + } + +For more information about the ACPI GPIO bindings see +Documentation/acpi/gpio-properties.txt. Platform Data ------------- diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt index d85fbae451ea930ddd9729dda3b55c44e443814b..c21c1313f09e55bee448fbb62d5efcd93eabe848 100644 --- a/Documentation/gpio/consumer.txt +++ b/Documentation/gpio/consumer.txt @@ -58,7 +58,6 @@ pattern where a GPIO is optional, the gpiod_get_optional() and gpiod_get_index_optional() functions can be used. These functions return NULL instead of -ENOENT if no GPIO has been assigned to the requested function: - struct gpio_desc *gpiod_get_optional(struct device *dev, const char *con_id, enum gpiod_flags flags) @@ -68,6 +67,27 @@ instead of -ENOENT if no GPIO has been assigned to the requested function: unsigned int index, enum gpiod_flags flags) +For a function using multiple GPIOs all of those can be obtained with one call: + + struct gpio_descs *gpiod_get_array(struct device *dev, + const char *con_id, + enum gpiod_flags flags) + +This function returns a struct gpio_descs which contains an array of +descriptors: + + struct gpio_descs { + unsigned int ndescs; + struct gpio_desc *desc[]; + } + +The following function returns NULL instead of -ENOENT if no GPIOs have been +assigned to the requested function: + + struct gpio_descs *gpiod_get_array_optional(struct device *dev, + const char *con_id, + enum gpiod_flags flags) + Device-managed variants of these functions are also defined: struct gpio_desc *devm_gpiod_get(struct device *dev, const char *con_id, @@ -82,20 +102,37 @@ Device-managed variants of these functions are also defined: const char *con_id, enum gpiod_flags flags) - struct gpio_desc * devm_gpiod_get_index_optional(struct device *dev, + struct gpio_desc *devm_gpiod_get_index_optional(struct device *dev, const char *con_id, unsigned int index, enum gpiod_flags flags) + struct gpio_descs *devm_gpiod_get_array(struct device *dev, + const char *con_id, + enum gpiod_flags flags) + + struct gpio_descs *devm_gpiod_get_array_optional(struct device *dev, + const char *con_id, + enum gpiod_flags flags) + A GPIO descriptor can be disposed of using the gpiod_put() function: void gpiod_put(struct gpio_desc *desc) -It is strictly forbidden to use a descriptor after calling this function. The -device-managed variant is, unsurprisingly: +For an array of GPIOs this function can be used: + + void gpiod_put_array(struct gpio_descs *descs) + +It is strictly forbidden to use a descriptor after calling these functions. +It is also not allowed to individually release descriptors (using gpiod_put()) +from an array acquired with gpiod_get_array(). + +The device-managed variants are, unsurprisingly: void devm_gpiod_put(struct device *dev, struct gpio_desc *desc) + void devm_gpiod_put_array(struct device *dev, struct gpio_descs *descs) + Using GPIOs =========== @@ -222,6 +259,26 @@ GPIOs belonging to the same bank or chip simultaneously if supported by the corresponding chip driver. In that case a significantly improved performance can be expected. If simultaneous setting is not possible the GPIOs will be set sequentially. + +The gpiod_set_array() functions take three arguments: + * array_size - the number of array elements + * desc_array - an array of GPIO descriptors + * value_array - an array of values to assign to the GPIOs + +The descriptor array can be obtained using the gpiod_get_array() function +or one of its variants. If the group of descriptors returned by that function +matches the desired group of GPIOs, those GPIOs can be set by simply using +the struct gpio_descs returned by gpiod_get_array(): + + struct gpio_descs *my_gpio_descs = gpiod_get_array(...); + gpiod_set_array(my_gpio_descs->ndescs, my_gpio_descs->desc, + my_gpio_values); + +It is also possible to set a completely arbitrary array of descriptors. The +descriptors may be obtained using any combination of gpiod_get() and +gpiod_get_array(). Afterwards the array of descriptors has to be setup +manually before it can be used with gpiod_set_array(). + Note that for optimal performance GPIOs belonging to the same chip should be contiguous within the array of descriptors. diff --git a/Documentation/i2c/slave-eeprom-backend b/Documentation/i2c/slave-eeprom-backend new file mode 100644 index 0000000000000000000000000000000000000000..c8444ef82acfa3a07d3dc876f08d38839bf33bd9 --- /dev/null +++ b/Documentation/i2c/slave-eeprom-backend @@ -0,0 +1,14 @@ +Linux I2C slave eeprom backend +============================== + +by Wolfram Sang in 2014-15 + +This is a proof-of-concept backend which acts like an EEPROM on the connected +I2C bus. The memory contents can be modified from userspace via this file +located in sysfs: + + /sys/bus/i2c/devices//slave-eeprom + +As of 2015, Linux doesn't support poll on binary sysfs files, so there is no +notfication when another master changed the content. + diff --git a/Documentation/i2c/slave-interface b/Documentation/i2c/slave-interface new file mode 100644 index 0000000000000000000000000000000000000000..389bb5d618549e5db99ed5ea8cb1b23f38ca48f4 --- /dev/null +++ b/Documentation/i2c/slave-interface @@ -0,0 +1,179 @@ +Linux I2C slave interface description +===================================== + +by Wolfram Sang in 2014-15 + +Linux can also be an I2C slave in case I2C controllers have slave support. +Besides this HW requirement, one also needs a software backend providing the +actual functionality. An example for this is the slave-eeprom driver, which +acts as a dual memory driver. While another I2C master on the bus can access it +like a regular EEPROM, the Linux I2C slave can access the content via sysfs and +retrieve/provide information as needed. The software backend driver and the I2C +bus driver communicate via events. Here is a small graph visualizing the data +flow and the means by which data is transported. The dotted line marks only one +example. The backend could also use e.g. a character device, be in-kernel +only, or something completely different: + + + e.g. sysfs I2C slave events I/O registers + +-----------+ v +---------+ v +--------+ v +------------+ + | Userspace +........+ Backend +-----------+ Driver +-----+ Controller | + +-----------+ +---------+ +--------+ +------------+ + | | + ----------------------------------------------------------------+-- I2C + --------------------------------------------------------------+---- Bus + +Note: Technically, there is also the I2C core between the backend and the +driver. However, at this time of writing, the layer is transparent. + + +User manual +=========== + +I2C slave backends behave like standard I2C clients. So, you can instantiate +them like described in the document 'instantiating-devices'. A quick example +for instantiating the slave-eeprom driver from userspace: + + # echo 0-0064 > /sys/bus/i2c/drivers/i2c-slave-eeprom/bind + +Each backend should come with separate documentation to describe its specific +behaviour and setup. + + +Developer manual +================ + +I2C slave events +---------------- + +The bus driver sends an event to the backend using the following function: + + ret = i2c_slave_event(client, event, &val) + +'client' describes the i2c slave device. 'event' is one of the special event +types described hereafter. 'val' holds an u8 value for the data byte to be +read/written and is thus bidirectional. The pointer to val must always be +provided even if val is not used for an event, i.e. don't use NULL here. 'ret' +is the return value from the backend. Mandatory events must be provided by the +bus drivers and must be checked for by backend drivers. + +Event types: + +* I2C_SLAVE_WRITE_REQUESTED (mandatory) + +'val': unused +'ret': always 0 + +Another I2C master wants to write data to us. This event should be sent once +our own address and the write bit was detected. The data did not arrive yet, so +there is nothing to process or return. Wakeup or initialization probably needs +to be done, though. + +* I2C_SLAVE_READ_REQUESTED (mandatory) + +'val': backend returns first byte to be sent +'ret': always 0 + +Another I2C master wants to read data from us. This event should be sent once +our own address and the read bit was detected. After returning, the bus driver +should transmit the first byte. + +* I2C_SLAVE_WRITE_RECEIVED (mandatory) + +'val': bus driver delivers received byte +'ret': 0 if the byte should be acked, some errno if the byte should be nacked + +Another I2C master has sent a byte to us which needs to be set in 'val'. If 'ret' +is zero, the bus driver should ack this byte. If 'ret' is an errno, then the byte +should be nacked. + +* I2C_SLAVE_READ_PROCESSED (mandatory) + +'val': backend returns next byte to be sent +'ret': always 0 + +The bus driver requests the next byte to be sent to another I2C master in +'val'. Important: This does not mean that the previous byte has been acked, it +only means that the previous byte is shifted out to the bus! To ensure seamless +transmission, most hardware requests the next byte when the previous one is +still shifted out. If the master sends NACK and stops reading after the byte +currently shifted out, this byte requested here is never used. It very likely +needs to be sent again on the next I2C_SLAVE_READ_REQUEST, depending a bit on +your backend, though. + +* I2C_SLAVE_STOP (mandatory) + +'val': unused +'ret': always 0 + +A stop condition was received. This can happen anytime and the backend should +reset its state machine for I2C transfers to be able to receive new requests. + + +Software backends +----------------- + +If you want to write a software backend: + +* use a standard i2c_driver and its matching mechanisms +* write the slave_callback which handles the above slave events + (best using a state machine) +* register this callback via i2c_slave_register() + +Check the i2c-slave-eeprom driver as an example. + + +Bus driver support +------------------ + +If you want to add slave support to the bus driver: + +* implement calls to register/unregister the slave and add those to the + struct i2c_algorithm. When registering, you probably need to set the i2c + slave address and enable slave specific interrupts. If you use runtime pm, you + should use pm_runtime_forbid() because your device usually needs to be powered + on always to be able to detect its slave address. When unregistering, do the + inverse of the above. + +* Catch the slave interrupts and send appropriate i2c_slave_events to the backend. + +Check the i2c-rcar driver as an example. + + +About ACK/NACK +-------------- + +It is good behaviour to always ACK the address phase, so the master knows if a +device is basically present or if it mysteriously disappeared. Using NACK to +state being busy is troublesome. SMBus demands to always ACK the address phase, +while the I2C specification is more loose on that. Most I2C controllers also +automatically ACK when detecting their slave addresses, so there is no option +to NACK them. For those reasons, this API does not support NACK in the address +phase. + +Currently, there is no slave event to report if the master did ACK or NACK a +byte when it reads from us. We could make this an optional event if the need +arises. However, cases should be extremely rare because the master is expected +to send STOP after that and we have an event for that. Also, keep in mind not +all I2C controllers have the possibility to report that event. + + +About buffers +------------- + +During development of this API, the question of using buffers instead of just +bytes came up. Such an extension might be possible, usefulness is unclear at +this time of writing. Some points to keep in mind when using buffers: + +* Buffers should be opt-in and slave drivers will always have to support + byte-based transactions as the ultimate fallback because this is how the + majority of HW works. + +* For backends simulating hardware registers, buffers are not helpful because + on writes an action should be immediately triggered. For reads, the data in + the buffer might get stale. + +* A master can send STOP at any time. For partially transferred buffers, this + means additional code to handle this exception. Such code tends to be + error-prone. + diff --git a/Documentation/i2c/summary b/Documentation/i2c/summary index 13ab076dcd92484149eec9ef9e8bc1fc33031397..809541ab352f03a6a9c3cb8570f52157f1d73054 100644 --- a/Documentation/i2c/summary +++ b/Documentation/i2c/summary @@ -41,7 +41,3 @@ integrated than Algorithm and Adapter. For a given configuration, you will need a driver for your I2C bus, and drivers for your I2C devices (usually one driver for each device). - -At this time, Linux only operates I2C (or SMBus) in master mode; you can't -use these APIs to make a Linux system behave as a slave/device, either to -speak a custom protocol or to emulate some other device. diff --git a/Documentation/i2o/README b/Documentation/i2o/README deleted file mode 100644 index ee91e2626ff072e817a0f91e05d01e439c943f0a..0000000000000000000000000000000000000000 --- a/Documentation/i2o/README +++ /dev/null @@ -1,63 +0,0 @@ - - Linux I2O Support (c) Copyright 1999 Red Hat Software - and others. - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - as published by the Free Software Foundation; either version - 2 of the License, or (at your option) any later version. - -AUTHORS (so far) - -Alan Cox, Building Number Three Ltd. - Core code, SCSI and Block OSMs - -Steve Ralston, LSI Logic Corp. - Debugging SCSI and Block OSM - -Deepak Saxena, Intel Corp. - Various core/block extensions - /proc interface, bug fixes - Ioctl interfaces for control - Debugging LAN OSM - -Philip Rumpf - Fixed assorted dumb SMP locking bugs - -Juha Sievanen, University of Helsinki Finland - LAN OSM code - /proc interface to LAN class - Bug fixes - Core code extensions - -Auvo Häkkinen, University of Helsinki Finland - LAN OSM code - /Proc interface to LAN class - Bug fixes - Core code extensions - -Taneli Vähäkangas, University of Helsinki Finland - Fixes to i2o_config - -CREDITS - - This work was made possible by - -Red Hat Software - Funding for the Building #3 part of the project - -Symbios Logic (Now LSI) - Host adapters, hints, known to work platforms when I hit - compatibility problems - -BoxHill Corporation - Loan of initial FibreChannel disk array used for development work. - -European Commission - Funding the work done by the University of Helsinki - -SysKonnect - Loan of FDDI and Gigabit Ethernet cards - -ASUSTeK - Loan of I2O motherboard diff --git a/Documentation/i2o/ioctl b/Documentation/i2o/ioctl deleted file mode 100644 index 27c3c5493116ada2eebf9fcd2480aea55072c5e4..0000000000000000000000000000000000000000 --- a/Documentation/i2o/ioctl +++ /dev/null @@ -1,394 +0,0 @@ - -Linux I2O User Space Interface -rev 0.3 - 04/20/99 - -============================================================================= -Originally written by Deepak Saxena(deepak@plexity.net) -Currently maintained by Deepak Saxena(deepak@plexity.net) -============================================================================= - -I. Introduction - -The Linux I2O subsystem provides a set of ioctl() commands that can be -utilized by user space applications to communicate with IOPs and devices -on individual IOPs. This document defines the specific ioctl() commands -that are available to the user and provides examples of their uses. - -This document assumes the reader is familiar with or has access to the -I2O specification as no I2O message parameters are outlined. For information -on the specification, see http://www.i2osig.org - -This document and the I2O user space interface are currently maintained -by Deepak Saxena. Please send all comments, errata, and bug fixes to -deepak@csociety.purdue.edu - -II. IOP Access - -Access to the I2O subsystem is provided through the device file named -/dev/i2o/ctl. This file is a character file with major number 10 and minor -number 166. It can be created through the following command: - - mknod /dev/i2o/ctl c 10 166 - -III. Determining the IOP Count - - SYNOPSIS - - ioctl(fd, I2OGETIOPS, int *count); - - u8 count[MAX_I2O_CONTROLLERS]; - - DESCRIPTION - - This function returns the system's active IOP table. count should - point to a buffer containing MAX_I2O_CONTROLLERS entries. Upon - returning, each entry will contain a non-zero value if the given - IOP unit is active, and NULL if it is inactive or non-existent. - - RETURN VALUE. - - Returns 0 if no errors occur, and -1 otherwise. If an error occurs, - errno is set appropriately: - - EFAULT Invalid user space pointer was passed - -IV. Getting Hardware Resource Table - - SYNOPSIS - - ioctl(fd, I2OHRTGET, struct i2o_cmd_hrt *hrt); - - struct i2o_cmd_hrtlct - { - u32 iop; /* IOP unit number */ - void *resbuf; /* Buffer for result */ - u32 *reslen; /* Buffer length in bytes */ - }; - - DESCRIPTION - - This function returns the Hardware Resource Table of the IOP specified - by hrt->iop in the buffer pointed to by hrt->resbuf. The actual size of - the data is written into *(hrt->reslen). - - RETURNS - - This function returns 0 if no errors occur. If an error occurs, -1 - is returned and errno is set appropriately: - - EFAULT Invalid user space pointer was passed - ENXIO Invalid IOP number - ENOBUFS Buffer not large enough. If this occurs, the required - buffer length is written into *(hrt->reslen) - -V. Getting Logical Configuration Table - - SYNOPSIS - - ioctl(fd, I2OLCTGET, struct i2o_cmd_lct *lct); - - struct i2o_cmd_hrtlct - { - u32 iop; /* IOP unit number */ - void *resbuf; /* Buffer for result */ - u32 *reslen; /* Buffer length in bytes */ - }; - - DESCRIPTION - - This function returns the Logical Configuration Table of the IOP specified - by lct->iop in the buffer pointed to by lct->resbuf. The actual size of - the data is written into *(lct->reslen). - - RETURNS - - This function returns 0 if no errors occur. If an error occurs, -1 - is returned and errno is set appropriately: - - EFAULT Invalid user space pointer was passed - ENXIO Invalid IOP number - ENOBUFS Buffer not large enough. If this occurs, the required - buffer length is written into *(lct->reslen) - -VI. Setting Parameters - - SYNOPSIS - - ioctl(fd, I2OPARMSET, struct i2o_parm_setget *ops); - - struct i2o_cmd_psetget - { - u32 iop; /* IOP unit number */ - u32 tid; /* Target device TID */ - void *opbuf; /* Operation List buffer */ - u32 oplen; /* Operation List buffer length in bytes */ - void *resbuf; /* Result List buffer */ - u32 *reslen; /* Result List buffer length in bytes */ - }; - - DESCRIPTION - - This function posts a UtilParamsSet message to the device identified - by ops->iop and ops->tid. The operation list for the message is - sent through the ops->opbuf buffer, and the result list is written - into the buffer pointed to by ops->resbuf. The number of bytes - written is placed into *(ops->reslen). - - RETURNS - - The return value is the size in bytes of the data written into - ops->resbuf if no errors occur. If an error occurs, -1 is returned - and errno is set appropriately: - - EFAULT Invalid user space pointer was passed - ENXIO Invalid IOP number - ENOBUFS Buffer not large enough. If this occurs, the required - buffer length is written into *(ops->reslen) - ETIMEDOUT Timeout waiting for reply message - ENOMEM Kernel memory allocation error - - A return value of 0 does not mean that the value was actually - changed properly on the IOP. The user should check the result - list to determine the specific status of the transaction. - -VII. Getting Parameters - - SYNOPSIS - - ioctl(fd, I2OPARMGET, struct i2o_parm_setget *ops); - - struct i2o_parm_setget - { - u32 iop; /* IOP unit number */ - u32 tid; /* Target device TID */ - void *opbuf; /* Operation List buffer */ - u32 oplen; /* Operation List buffer length in bytes */ - void *resbuf; /* Result List buffer */ - u32 *reslen; /* Result List buffer length in bytes */ - }; - - DESCRIPTION - - This function posts a UtilParamsGet message to the device identified - by ops->iop and ops->tid. The operation list for the message is - sent through the ops->opbuf buffer, and the result list is written - into the buffer pointed to by ops->resbuf. The actual size of data - written is placed into *(ops->reslen). - - RETURNS - - EFAULT Invalid user space pointer was passed - ENXIO Invalid IOP number - ENOBUFS Buffer not large enough. If this occurs, the required - buffer length is written into *(ops->reslen) - ETIMEDOUT Timeout waiting for reply message - ENOMEM Kernel memory allocation error - - A return value of 0 does not mean that the value was actually - properly retrieved. The user should check the result list - to determine the specific status of the transaction. - -VIII. Downloading Software - - SYNOPSIS - - ioctl(fd, I2OSWDL, struct i2o_sw_xfer *sw); - - struct i2o_sw_xfer - { - u32 iop; /* IOP unit number */ - u8 flags; /* DownloadFlags field */ - u8 sw_type; /* Software type */ - u32 sw_id; /* Software ID */ - void *buf; /* Pointer to software buffer */ - u32 *swlen; /* Length of software buffer */ - u32 *maxfrag; /* Number of fragments */ - u32 *curfrag; /* Current fragment number */ - }; - - DESCRIPTION - - This function downloads a software fragment pointed by sw->buf - to the iop identified by sw->iop. The DownloadFlags, SwID, SwType - and SwSize fields of the ExecSwDownload message are filled in with - the values of sw->flags, sw->sw_id, sw->sw_type and *(sw->swlen). - - The fragments _must_ be sent in order and be 8K in size. The last - fragment _may_ be shorter, however. The kernel will compute its - size based on information in the sw->swlen field. - - Please note that SW transfers can take a long time. - - RETURNS - - This function returns 0 no errors occur. If an error occurs, -1 - is returned and errno is set appropriately: - - EFAULT Invalid user space pointer was passed - ENXIO Invalid IOP number - ETIMEDOUT Timeout waiting for reply message - ENOMEM Kernel memory allocation error - -IX. Uploading Software - - SYNOPSIS - - ioctl(fd, I2OSWUL, struct i2o_sw_xfer *sw); - - struct i2o_sw_xfer - { - u32 iop; /* IOP unit number */ - u8 flags; /* UploadFlags */ - u8 sw_type; /* Software type */ - u32 sw_id; /* Software ID */ - void *buf; /* Pointer to software buffer */ - u32 *swlen; /* Length of software buffer */ - u32 *maxfrag; /* Number of fragments */ - u32 *curfrag; /* Current fragment number */ - }; - - DESCRIPTION - - This function uploads a software fragment from the IOP identified - by sw->iop, sw->sw_type, sw->sw_id and optionally sw->swlen fields. - The UploadFlags, SwID, SwType and SwSize fields of the ExecSwUpload - message are filled in with the values of sw->flags, sw->sw_id, - sw->sw_type and *(sw->swlen). - - The fragments _must_ be requested in order and be 8K in size. The - user is responsible for allocating memory pointed by sw->buf. The - last fragment _may_ be shorter. - - Please note that SW transfers can take a long time. - - RETURNS - - This function returns 0 if no errors occur. If an error occurs, -1 - is returned and errno is set appropriately: - - EFAULT Invalid user space pointer was passed - ENXIO Invalid IOP number - ETIMEDOUT Timeout waiting for reply message - ENOMEM Kernel memory allocation error - -X. Removing Software - - SYNOPSIS - - ioctl(fd, I2OSWDEL, struct i2o_sw_xfer *sw); - - struct i2o_sw_xfer - { - u32 iop; /* IOP unit number */ - u8 flags; /* RemoveFlags */ - u8 sw_type; /* Software type */ - u32 sw_id; /* Software ID */ - void *buf; /* Unused */ - u32 *swlen; /* Length of the software data */ - u32 *maxfrag; /* Unused */ - u32 *curfrag; /* Unused */ - }; - - DESCRIPTION - - This function removes software from the IOP identified by sw->iop. - The RemoveFlags, SwID, SwType and SwSize fields of the ExecSwRemove message - are filled in with the values of sw->flags, sw->sw_id, sw->sw_type and - *(sw->swlen). Give zero in *(sw->len) if the value is unknown. IOP uses - *(sw->swlen) value to verify correct identication of the module to remove. - The actual size of the module is written into *(sw->swlen). - - RETURNS - - This function returns 0 if no errors occur. If an error occurs, -1 - is returned and errno is set appropriately: - - EFAULT Invalid user space pointer was passed - ENXIO Invalid IOP number - ETIMEDOUT Timeout waiting for reply message - ENOMEM Kernel memory allocation error - -X. Validating Configuration - - SYNOPSIS - - ioctl(fd, I2OVALIDATE, int *iop); - u32 iop; - - DESCRIPTION - - This function posts an ExecConfigValidate message to the controller - identified by iop. This message indicates that the current - configuration is accepted. The iop changes the status of suspect drivers - to valid and may delete old drivers from its store. - - RETURNS - - This function returns 0 if no erro occur. If an error occurs, -1 is - returned and errno is set appropriately: - - ETIMEDOUT Timeout waiting for reply message - ENXIO Invalid IOP number - -XI. Configuration Dialog - - SYNOPSIS - - ioctl(fd, I2OHTML, struct i2o_html *htquery); - struct i2o_html - { - u32 iop; /* IOP unit number */ - u32 tid; /* Target device ID */ - u32 page; /* HTML page */ - void *resbuf; /* Buffer for reply HTML page */ - u32 *reslen; /* Length in bytes of reply buffer */ - void *qbuf; /* Pointer to HTTP query string */ - u32 qlen; /* Length in bytes of query string buffer */ - }; - - DESCRIPTION - - This function posts an UtilConfigDialog message to the device identified - by htquery->iop and htquery->tid. The requested HTML page number is - provided by the htquery->page field, and the resultant data is stored - in the buffer pointed to by htquery->resbuf. If there is an HTTP query - string that is to be sent to the device, it should be sent in the buffer - pointed to by htquery->qbuf. If there is no query string, this field - should be set to NULL. The actual size of the reply received is written - into *(htquery->reslen). - - RETURNS - - This function returns 0 if no error occur. If an error occurs, -1 - is returned and errno is set appropriately: - - EFAULT Invalid user space pointer was passed - ENXIO Invalid IOP number - ENOBUFS Buffer not large enough. If this occurs, the required - buffer length is written into *(ops->reslen) - ETIMEDOUT Timeout waiting for reply message - ENOMEM Kernel memory allocation error - -XII. Events - - In the process of determining this. Current idea is to have use - the select() interface to allow user apps to periodically poll - the /dev/i2o/ctl device for events. When select() notifies the user - that an event is available, the user would call read() to retrieve - a list of all the events that are pending for the specific device. - -============================================================================= -Revision History -============================================================================= - -Rev 0.1 - 04/01/99 -- Initial revision - -Rev 0.2 - 04/06/99 -- Changed return values to match UNIX ioctl() standard. Only return values - are 0 and -1. All errors are reported through errno. -- Added summary of proposed possible event interfaces - -Rev 0.3 - 04/20/99 -- Changed all ioctls() to use pointers to user data instead of actual data -- Updated error values to match the code diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt index 92ae734c00c348ab810373e0dc838a92462c932f..c86f2f1ae4f6aa2d9af3e3987e8be06fd237dbef 100644 --- a/Documentation/input/alps.txt +++ b/Documentation/input/alps.txt @@ -58,7 +58,7 @@ To exit command mode, PSMOUSE_CMD_SETSTREAM (EA) is sent to the touchpad. While in command mode, register addresses can be set by first sending a specific command, either EC for v3 devices or F5 for v4 devices. Then the address is sent one nibble at a time, where each nibble is encoded as a -command with optional data. This enoding differs slightly between the v3 and +command with optional data. This encoding differs slightly between the v3 and v4 protocols. Once an address has been set, the addressed register can be read by sending @@ -94,6 +94,10 @@ PS/2 packet format Note that the device never signals overflow condition. +For protocol version 2 devices when the trackpoint is used, and no fingers +are on the touchpad, the M R L bits signal the combined status of both the +pointingstick and touchpad buttons. + ALPS Absolute Mode - Protocol Version 1 -------------------------------------- @@ -107,7 +111,7 @@ ALPS Absolute Mode - Protocol Version 1 ALPS Absolute Mode - Protocol Version 2 --------------------------------------- - byte 0: 1 ? ? ? 1 ? ? ? + byte 0: 1 ? ? ? 1 PSM PSR PSL byte 1: 0 x6 x5 x4 x3 x2 x1 x0 byte 2: 0 x10 x9 x8 x7 ? fin ges byte 3: 0 y9 y8 y7 1 M R L @@ -115,7 +119,8 @@ ALPS Absolute Mode - Protocol Version 2 byte 5: 0 z6 z5 z4 z3 z2 z1 z0 Protocol Version 2 DualPoint devices send standard PS/2 mouse packets for -the DualPoint Stick. +the DualPoint Stick. For non interleaved dualpoint devices the pointingstick +buttons get reported separately in the PSM, PSR and PSL bits. Dualpoint device -- interleaved packet format --------------------------------------------- @@ -139,7 +144,7 @@ ALPS Absolute Mode - Protocol Version 3 --------------------------------------- ALPS protocol version 3 has three different packet formats. The first two are -associated with touchpad events, and the third is associatd with trackstick +associated with touchpad events, and the third is associated with trackstick events. The first type is the touchpad position packet. diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt index 96705616f5820a6d48d6cfda497c7fcf30917e2a..3f0f5ce3338b63a8153410c9b08edba739989e22 100644 --- a/Documentation/input/event-codes.txt +++ b/Documentation/input/event-codes.txt @@ -229,7 +229,7 @@ such device to feedback. EV_PWR: ---------- EV_PWR events are a special type of event used specifically for power -mangement. Its usage is not well defined. To be addressed later. +management. Its usage is not well defined. To be addressed later. Device properties: ================= diff --git a/Documentation/input/gpio-tilt.txt b/Documentation/input/gpio-tilt.txt index 06d60c3ff5e732d22cea71f599298db6432deca4..2cdfd9bcb1afc1015b4f98201f6b38cdab1691b3 100644 --- a/Documentation/input/gpio-tilt.txt +++ b/Documentation/input/gpio-tilt.txt @@ -28,7 +28,7 @@ Example: -------- Example configuration for a single TS1003 tilt switch that rotates around -one axis in 4 steps and emitts the current tilt via two GPIOs. +one axis in 4 steps and emits the current tilt via two GPIOs. static int sg060_tilt_enable(struct device *dev) { /* code to enable the sensors */ diff --git a/Documentation/input/iforce-protocol.txt b/Documentation/input/iforce-protocol.txt index 2d5fbfd6023e8dffda80793e02c58b3f658bab0b..66287151c54a99fd76cab71888ac2b720f4c489b 100644 --- a/Documentation/input/iforce-protocol.txt +++ b/Documentation/input/iforce-protocol.txt @@ -97,7 +97,7 @@ LEN= 0e *** Attack and fade *** OP= 02 LEN= 08 -00-01 Address where to store the parameteres +00-01 Address where to store the parameters 02-03 Duration of attack (little endian encoding, in ms) 04 Level at end of attack. Signed byte. 05-06 Duration of fade. diff --git a/Documentation/input/walkera0701.txt b/Documentation/input/walkera0701.txt index 561385d38482100d9c0a917b8647598aefd9f810..49e3ac60dcef57d045720f5d9f96fc2b522a0f62 100644 --- a/Documentation/input/walkera0701.txt +++ b/Documentation/input/walkera0701.txt @@ -91,7 +91,7 @@ absolute binary value. (10 bits per channel). Next nibble is checksum for first ten nibbles. Next nibbles 12 .. 21 represents four channels (not all channels can be -directly controlled from TX). Binary representations ar the same as in first +directly controlled from TX). Binary representations are the same as in first four channels. In nibbles 22 and 23 is a special magic number. Nibble 24 is checksum for nibbles 12..23. diff --git a/Documentation/input/yealink.txt b/Documentation/input/yealink.txt index 5360e434486ced9970c6c71454b085b3ff617061..8277b76ec50649f3a35f5f5407d135fc37312a0e 100644 --- a/Documentation/input/yealink.txt +++ b/Documentation/input/yealink.txt @@ -93,7 +93,7 @@ Format description: Format specifier '8' : Generic 7 segment digit with individual addressable segments - Reduced capability 7 segm digit, when segments are hard wired together. + Reduced capability 7 segment digit, when segments are hard wired together. '1' : 2 segments digit only able to produce a 1. 'e' : Most significant day of the month digit, able to produce at least 1 2 3. diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 8136e1fd30fdede7141d70bc00f5c6b8097ed981..51f4221657bff5b03c9a8ef44116d6e27ef27423 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -321,6 +321,7 @@ Code Seq#(hex) Include File Comments 0xDB 00-0F drivers/char/mwave/mwavepub.h 0xDD 00-3F ZFCP device driver see drivers/s390/scsi/ +0xEC 00-01 drivers/platform/chrome/cros_ec_dev.h ChromeOS EC driver 0xF3 00-3F drivers/usb/misc/sisusbvga/sisusb.h sisfb (in development) 0xF4 00-1F video/mbxfb.h mbxfb diff --git a/Documentation/kasan.txt b/Documentation/kasan.txt index 092fc10961fede482be1f7983e72db0e6c8ec3a8..4692241789b1f608ebc2535ddef1a07722a3fb19 100644 --- a/Documentation/kasan.txt +++ b/Documentation/kasan.txt @@ -9,7 +9,9 @@ a fast and comprehensive solution for finding use-after-free and out-of-bounds bugs. KASan uses compile-time instrumentation for checking every memory access, -therefore you will need a certain version of GCC > 4.9.2 +therefore you will need a gcc version of 4.9.2 or later. KASan could detect out +of bounds accesses to stack or global variables, but only if gcc 5.0 or later was +used to built the kernel. Currently KASan is supported only for x86_64 architecture and requires that the kernel be built with the SLUB allocator. @@ -23,8 +25,8 @@ To enable KASAN configure kernel with: and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline/inline is compiler instrumentation types. The former produces smaller binary the -latter is 1.1 - 2 times faster. Inline instrumentation requires GCC 5.0 or -latter. +latter is 1.1 - 2 times faster. Inline instrumentation requires a gcc version +of 5.0 or later. Currently KASAN works only with the SLUB memory allocator. For better bug detection and nicer report, enable CONFIG_STACKTRACE and put diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 01aa47d3b6ab607e6a66f2a6a827b4b1afe4da73..61ab1628a057cc2c4d8b11d892d834f7e5f7773a 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -165,7 +165,7 @@ multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30 bytes respectively. Such letter suffixes can also be entirely omitted. - acpi= [HW,ACPI,X86] + acpi= [HW,ACPI,X86,ARM64] Advanced Configuration and Power Interface Format: { force | off | strict | noirq | rsdt } force -- enable ACPI if default was off @@ -175,6 +175,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. strictly ACPI specification compliant. rsdt -- prefer RSDT over (default) XSDT copy_dsdt -- copy DSDT to memory + For ARM64, ONLY "acpi=off" or "acpi=force" are available See also Documentation/power/runtime_pm.txt, pci=noacpi @@ -713,10 +714,18 @@ bytes respectively. Such letter suffixes can also be entirely omitted. uart[8250],io,[,options] uart[8250],mmio,[,options] + uart[8250],mmio32,[,options] + uart[8250],0x[,options] Start an early, polled-mode console on the 8250/16550 UART at the specified I/O port or MMIO address, - switching to the matching ttyS device later. The - options are the same as for ttyS, above. + switching to the matching ttyS device later. + MMIO inter-register address stride is either 8-bit + (mmio) or 32-bit (mmio32). + If none of [io|mmio|mmio32], is assumed to be + equivalent to 'mmio'. 'options' are specified in the + same format described for ttyS above; if unspecified, + the h/w is not re-initialized. + hvc Use the hypervisor console device . This is for both Xen and PowerPC hypervisors. @@ -928,6 +937,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Enable debug messages at boot time. See Documentation/dynamic-debug-howto.txt for details. + eagerfpu= [X86] + on enable eager fpu restore + off disable eager fpu restore + auto selects the default scheme, which automatically + enables eagerfpu restore for xsaveopt. + early_ioremap_debug [KNL] Enable debug messages in early_ioremap support. This is useful for tracking down temporary early mappings @@ -944,11 +959,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted. uart[8250],io,[,options] uart[8250],mmio,[,options] uart[8250],mmio32,[,options] + uart[8250],0x[,options] Start an early, polled-mode console on the 8250/16550 UART at the specified I/O port or MMIO address. MMIO inter-register address stride is either 8-bit (mmio) or 32-bit (mmio32). - The options are the same as for ttyS, above. + If none of [io|mmio|mmio32], is assumed to be + equivalent to 'mmio'. 'options' are specified in the + same format described for "console=ttyS"; if + unspecified, the h/w is not initialized. pl011, Start an early, polled-mode console on a pl011 serial @@ -1966,6 +1985,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. or memmap=0x10000$0x18690000 + memmap=nn[KMG]!ss[KMG] + [KNL,X86] Mark specific memory as protected. + Region of memory to be used, from ss to ss+nn. + The memory region may be marked as e820 type 12 (0xc) + and is NVDIMM or ADR memory. + memory_corruption_check=0/1 [X86] Some BIOSes seem to corrupt the first 64k of memory when doing things like suspend/resume. @@ -1989,7 +2014,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. seconds. Use this parameter to check at some other rate. 0 disables periodic checking. - memtest= [KNL,X86] Enable memtest + memtest= [KNL,X86,ARM] Enable memtest Format: default : 0 Specifies the number of memtest passes to be @@ -2236,8 +2261,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted. nmi_watchdog= [KNL,BUGS=X86] Debugging features for SMP kernels Format: [panic,][nopanic,][num] - Valid num: 0 + Valid num: 0 or 1 0 - turn nmi_watchdog off + 1 - turn nmi_watchdog on When panic is specified, panic when an NMI watchdog timeout occurs (or 'nopanic' to override the opposite default). @@ -2316,12 +2342,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted. noexec32=off: disable non-executable mappings read implies executable mappings - nofpu [SH] Disable hardware FPU at boot time. + nofpu [MIPS,SH] Disable hardware FPU at boot time. nofxsr [BUGS=X86-32] Disables x86 floating point extended register save and restore. The kernel will only save legacy floating-point registers on task switch. + nohugeiomap [KNL,x86] Disable kernel huge I/O mappings. + noxsave [BUGS=X86] Disables x86 extended register state save and restore using xsave. The kernel will fallback to enabling legacy floating-point and sse state. @@ -2341,12 +2369,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. parameter, xsave area per process might occupy more memory on xsaves enabled systems. - eagerfpu= [X86] - on enable eager fpu restore - off disable eager fpu restore - auto selects the default scheme, which automatically - enables eagerfpu restore for xsaveopt. - nohlt [BUGS=ARM,SH] Tells the kernel that the sleep(SH) or wfi(ARM) instruction doesn't work correctly and not to use it. This is also useful when using JTAG debugger. @@ -2464,7 +2486,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. nousb [USB] Disable the USB subsystem - nowatchdog [KNL] Disable the lockup detector (NMI watchdog). + nowatchdog [KNL] Disable both lockup detectors, i.e. + soft-lockup and NMI watchdog (hard-lockup). nowb [ARM] @@ -2969,6 +2992,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Set maximum number of finished RCU callbacks to process in one batch. + rcutree.gp_init_delay= [KNL] + Set the number of jiffies to delay each step of + RCU grace-period initialization. This only has + effect when CONFIG_RCU_TORTURE_TEST_SLOW_INIT is + set. + rcutree.rcu_fanout_leaf= [KNL] Increase the number of CPUs assigned to each leaf rcu_node structure. Useful for very large @@ -2992,11 +3021,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted. value is one, and maximum value is HZ. rcutree.kthread_prio= [KNL,BOOT] - Set the SCHED_FIFO priority of the RCU - per-CPU kthreads (rcuc/N). This value is also - used for the priority of the RCU boost threads - (rcub/N). Valid values are 1-99 and the default - is 1 (the least-favored priority). + Set the SCHED_FIFO priority of the RCU per-CPU + kthreads (rcuc/N). This value is also used for + the priority of the RCU boost threads (rcub/N) + and for the RCU grace-period kthreads (rcu_bh, + rcu_preempt, and rcu_sched). If RCU_BOOST is + set, valid values are 1-99 and the default is 1 + (the least-favored priority). Otherwise, when + RCU_BOOST is not set, valid values are 0-99 and + the default is zero (non-realtime operation). rcutree.rcu_nocb_leader_stride= [KNL] Set the number of NOCB kthread groups, which @@ -3463,6 +3496,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted. improve throughput, but will also increase the amount of memory reserved for use by the client. + suspend.pm_test_delay= + [SUSPEND] + Sets the number of seconds to remain in a suspend test + mode before resuming the system (see + /sys/power/pm_test). Only available when CONFIG_PM_DEBUG + is set. Default value is 5. + swapaccount=[0|1] [KNL] Enable accounting of swap in memory resource controller if no parameter or 1 is given or disable @@ -3747,6 +3787,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. READ_CAPACITY_16 command); f = NO_REPORT_OPCODES (don't use report opcodes command, uas only); + g = MAX_SECTORS_240 (don't transfer more than + 240 sectors at a time, uas only); h = CAPACITY_HEURISTICS (decrease the reported device capacity by one sector if the number is odd); diff --git a/Documentation/kernel-per-CPU-kthreads.txt b/Documentation/kernel-per-CPU-kthreads.txt index f3cd299fcc41203f9fe73ad16cd70aa77a421ef3..f4cbfe0ba1085b4df3067dcc457219699c5c6150 100644 --- a/Documentation/kernel-per-CPU-kthreads.txt +++ b/Documentation/kernel-per-CPU-kthreads.txt @@ -190,20 +190,24 @@ To reduce its OS jitter, do any of the following: on each CPU, including cs_dbs_timer() and od_dbs_timer(). WARNING: Please check your CPU specifications to make sure that this is safe on your particular system. - d. It is not possible to entirely get rid of OS jitter - from vmstat_update() on CONFIG_SMP=y systems, but you - can decrease its frequency by writing a large value - to /proc/sys/vm/stat_interval. The default value is - HZ, for an interval of one second. Of course, larger - values will make your virtual-memory statistics update - more slowly. Of course, you can also run your workload - at a real-time priority, thus preempting vmstat_update(), + d. As of v3.18, Christoph Lameter's on-demand vmstat workers + commit prevents OS jitter due to vmstat_update() on + CONFIG_SMP=y systems. Before v3.18, is not possible + to entirely get rid of the OS jitter, but you can + decrease its frequency by writing a large value to + /proc/sys/vm/stat_interval. The default value is HZ, + for an interval of one second. Of course, larger values + will make your virtual-memory statistics update more + slowly. Of course, you can also run your workload at + a real-time priority, thus preempting vmstat_update(), but if your workload is CPU-bound, this is a bad idea. However, there is an RFC patch from Christoph Lameter (based on an earlier one from Gilad Ben-Yossef) that reduces or even eliminates vmstat overhead for some workloads at https://lkml.org/lkml/2013/9/4/379. - e. If running on high-end powerpc servers, build with + e. Boot with "elevator=noop" to avoid workqueue use by + the block layer. + f. If running on high-end powerpc servers, build with CONFIG_PPC_RTAS_DAEMON=n. This prevents the RTAS daemon from running on each CPU every second or so. (This will require editing Kconfig files and will defeat @@ -211,12 +215,12 @@ To reduce its OS jitter, do any of the following: due to the rtas_event_scan() function. WARNING: Please check your CPU specifications to make sure that this is safe on your particular system. - f. If running on Cell Processor, build your kernel with + g. If running on Cell Processor, build your kernel with CBE_CPUFREQ_SPU_GOVERNOR=n to avoid OS jitter from spu_gov_work(). WARNING: Please check your CPU specifications to make sure that this is safe on your particular system. - g. If running on PowerMAC, build your kernel with + h. If running on PowerMAC, build your kernel with CONFIG_PMAC_RACKMETER=n to disable the CPU-meter, avoiding OS jitter from rackmeter_do_timer(). @@ -258,8 +262,12 @@ Purpose: Detect software lockups on each CPU. To reduce its OS jitter, do at least one of the following: 1. Build with CONFIG_LOCKUP_DETECTOR=n, which will prevent these kthreads from being created in the first place. -2. Echo a zero to /proc/sys/kernel/watchdog to disable the +2. Boot with "nosoftlockup=0", which will also prevent these kthreads + from being created. Other related watchdog and softlockup boot + parameters may be found in Documentation/kernel-parameters.txt + and Documentation/watchdog/watchdog-parameters.txt. +3. Echo a zero to /proc/sys/kernel/watchdog to disable the watchdog timer. -3. Echo a large number of /proc/sys/kernel/watchdog_thresh in +4. Echo a large number of /proc/sys/kernel/watchdog_thresh in order to reduce the frequency of OS jitter due to the watchdog timer down to a level that is acceptable for your workload. diff --git a/Documentation/kmemcheck.txt b/Documentation/kmemcheck.txt index a41bdebbe87bf459e3c07d1dfd093f9eb0e80c3e..80aae85d8da6c1b8476fd6824553ae7070e5c508 100644 --- a/Documentation/kmemcheck.txt +++ b/Documentation/kmemcheck.txt @@ -82,8 +82,8 @@ menu to even appear in "menuconfig". These are: o CONFIG_DEBUG_PAGEALLOC=n - This option is located under "Kernel hacking" / "Debug page memory - allocations". + This option is located under "Kernel hacking" / "Memory Debugging" + / "Debug page memory allocations". In addition, I highly recommend turning on CONFIG_DEBUG_INFO=y. This is also located under "Kernel hacking". With this, you will be able to get line number diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt index 1488b6525eb68dbf8310bc1eeb7946fe815ad919..1f9b3e2b98aec9a6687ae14b4f85d7c143729c07 100644 --- a/Documentation/kprobes.txt +++ b/Documentation/kprobes.txt @@ -305,8 +305,8 @@ architectures: 3. Configuring Kprobes When configuring the kernel using make menuconfig/xconfig/oldconfig, -ensure that CONFIG_KPROBES is set to "y". Under "Instrumentation -Support", look for "Kprobes". +ensure that CONFIG_KPROBES is set to "y". Under "General setup", look +for "Kprobes". So that you can load and unload Kprobes-based instrumentation modules, make sure "Loadable module support" (CONFIG_MODULES) and "Module diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index fc04c14de4bbc3705e14eddb97a214ca8a7f6331..72a150d8f3dfa58975a7ed05d0371e475e059e5b 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -1355,6 +1355,24 @@ Sysfs notes: rfkill controller switch "tpacpi_uwb_sw": refer to Documentation/rfkill.txt for details. +Adaptive keyboard +----------------- + +sysfs device attribute: adaptive_kbd_mode + +This sysfs attribute controls the keyboard "face" that will be shown on the +Lenovo X1 Carbon 2nd gen (2014)'s adaptive keyboard. The value can be read +and set. + +1 = Home mode +2 = Web-browser mode +3 = Web-conference mode +4 = Function mode +5 = Layflat mode + +For more details about which buttons will appear depending on the mode, please +review the laptop's user guide: +http://www.lenovo.com/shop/americas/content/user_guides/x1carbon_2_ug_en.pdf Multiple Commands, Module Parameters ------------------------------------ diff --git a/Documentation/leds/leds-class-flash.txt b/Documentation/leds/leds-class-flash.txt new file mode 100644 index 0000000000000000000000000000000000000000..19bb67355424a053127f19b12f347a9cdafd513a --- /dev/null +++ b/Documentation/leds/leds-class-flash.txt @@ -0,0 +1,22 @@ + +Flash LED handling under Linux +============================== + +Some LED devices provide two modes - torch and flash. In the LED subsystem +those modes are supported by LED class (see Documentation/leds/leds-class.txt) +and LED Flash class respectively. The torch mode related features are enabled +by default and the flash ones only if a driver declares it by setting +LED_DEV_CAP_FLASH flag. + +In order to enable the support for flash LEDs CONFIG_LEDS_CLASS_FLASH symbol +must be defined in the kernel config. A LED Flash class driver must be +registered in the LED subsystem with led_classdev_flash_register function. + +Following sysfs attributes are exposed for controlling flash LED devices: +(see Documentation/ABI/testing/sysfs-class-led-flash) + - flash_brightness + - max_flash_brightness + - flash_timeout + - max_flash_timeout + - flash_strobe + - flash_fault diff --git a/Documentation/md-cluster.txt b/Documentation/md-cluster.txt new file mode 100644 index 0000000000000000000000000000000000000000..de1af7db33551d311eab599bd6a4c227ad8d904b --- /dev/null +++ b/Documentation/md-cluster.txt @@ -0,0 +1,176 @@ +The cluster MD is a shared-device RAID for a cluster. + + +1. On-disk format + +Separate write-intent-bitmap are used for each cluster node. +The bitmaps record all writes that may have been started on that node, +and may not yet have finished. The on-disk layout is: + +0 4k 8k 12k +------------------------------------------------------------------- +| idle | md super | bm super [0] + bits | +| bm bits[0, contd] | bm super[1] + bits | bm bits[1, contd] | +| bm super[2] + bits | bm bits [2, contd] | bm super[3] + bits | +| bm bits [3, contd] | | | + +During "normal" functioning we assume the filesystem ensures that only one +node writes to any given block at a time, so a write +request will + - set the appropriate bit (if not already set) + - commit the write to all mirrors + - schedule the bit to be cleared after a timeout. + +Reads are just handled normally. It is up to the filesystem to +ensure one node doesn't read from a location where another node (or the same +node) is writing. + + +2. DLM Locks for management + +There are two locks for managing the device: + +2.1 Bitmap lock resource (bm_lockres) + + The bm_lockres protects individual node bitmaps. They are named in the + form bitmap001 for node 1, bitmap002 for node and so on. When a node + joins the cluster, it acquires the lock in PW mode and it stays so + during the lifetime the node is part of the cluster. The lock resource + number is based on the slot number returned by the DLM subsystem. Since + DLM starts node count from one and bitmap slots start from zero, one is + subtracted from the DLM slot number to arrive at the bitmap slot number. + +3. Communication + +Each node has to communicate with other nodes when starting or ending +resync, and metadata superblock updates. + +3.1 Message Types + + There are 3 types, of messages which are passed + + 3.1.1 METADATA_UPDATED: informs other nodes that the metadata has been + updated, and the node must re-read the md superblock. This is performed + synchronously. + + 3.1.2 RESYNC: informs other nodes that a resync is initiated or ended + so that each node may suspend or resume the region. + +3.2 Communication mechanism + + The DLM LVB is used to communicate within nodes of the cluster. There + are three resources used for the purpose: + + 3.2.1 Token: The resource which protects the entire communication + system. The node having the token resource is allowed to + communicate. + + 3.2.2 Message: The lock resource which carries the data to + communicate. + + 3.2.3 Ack: The resource, acquiring which means the message has been + acknowledged by all nodes in the cluster. The BAST of the resource + is used to inform the receive node that a node wants to communicate. + +The algorithm is: + + 1. receive status + + sender receiver receiver + ACK:CR ACK:CR ACK:CR + + 2. sender get EX of TOKEN + sender get EX of MESSAGE + sender receiver receiver + TOKEN:EX ACK:CR ACK:CR + MESSAGE:EX + ACK:CR + + Sender checks that it still needs to send a message. Messages received + or other events that happened while waiting for the TOKEN may have made + this message inappropriate or redundant. + + 3. sender write LVB. + sender down-convert MESSAGE from EX to CR + sender try to get EX of ACK + [ wait until all receiver has *processed* the MESSAGE ] + + [ triggered by bast of ACK ] + receiver get CR of MESSAGE + receiver read LVB + receiver processes the message + [ wait finish ] + receiver release ACK + + sender receiver receiver + TOKEN:EX MESSAGE:CR MESSAGE:CR + MESSAGE:CR + ACK:EX + + 4. triggered by grant of EX on ACK (indicating all receivers have processed + message) + sender down-convert ACK from EX to CR + sender release MESSAGE + sender release TOKEN + receiver upconvert to EX of MESSAGE + receiver get CR of ACK + receiver release MESSAGE + + sender receiver receiver + ACK:CR ACK:CR ACK:CR + + +4. Handling Failures + +4.1 Node Failure + When a node fails, the DLM informs the cluster with the slot. The node + starts a cluster recovery thread. The cluster recovery thread: + - acquires the bitmap lock of the failed node + - opens the bitmap + - reads the bitmap of the failed node + - copies the set bitmap to local node + - cleans the bitmap of the failed node + - releases bitmap lock of the failed node + - initiates resync of the bitmap on the current node + + The resync process, is the regular md resync. However, in a clustered + environment when a resync is performed, it needs to tell other nodes + of the areas which are suspended. Before a resync starts, the node + send out RESYNC_START with the (lo,hi) range of the area which needs + to be suspended. Each node maintains a suspend_list, which contains + the list of ranges which are currently suspended. On receiving + RESYNC_START, the node adds the range to the suspend_list. Similarly, + when the node performing resync finishes, it send RESYNC_FINISHED + to other nodes and other nodes remove the corresponding entry from + the suspend_list. + + A helper function, should_suspend() can be used to check if a particular + I/O range should be suspended or not. + +4.2 Device Failure + Device failures are handled and communicated with the metadata update + routine. + +5. Adding a new Device +For adding a new device, it is necessary that all nodes "see" the new device +to be added. For this, the following algorithm is used: + + 1. Node 1 issues mdadm --manage /dev/mdX --add /dev/sdYY which issues + ioctl(ADD_NEW_DISC with disc.state set to MD_DISK_CLUSTER_ADD) + 2. Node 1 sends NEWDISK with uuid and slot number + 3. Other nodes issue kobject_uevent_env with uuid and slot number + (Steps 4,5 could be a udev rule) + 4. In userspace, the node searches for the disk, perhaps + using blkid -t SUB_UUID="" + 5. Other nodes issue either of the following depending on whether the disk + was found: + ioctl(ADD_NEW_DISK with disc.state set to MD_DISK_CANDIDATE and + disc.number set to slot number) + ioctl(CLUSTERED_DISK_NACK) + 6. Other nodes drop lock on no-new-devs (CR) if device is found + 7. Node 1 attempts EX lock on no-new-devs + 8. If node 1 gets the lock, it sends METADATA_UPDATED after unmarking the disk + as SpareLocal + 9. If not (get no-new-dev lock), it fails the operation and sends METADATA_UPDATED + 10. Other nodes get the information whether a disk is added or not + by the following METADATA_UPDATED. diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index ca2387ef27ab0c38cdb4b5e74ffbcde9509d61d8..f95746189b5ded41d9ae8bdbbcafec4e1da8820e 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -592,9 +592,9 @@ See also the subsection on "Cache Coherency" for a more thorough example. CONTROL DEPENDENCIES -------------------- -A control dependency requires a full read memory barrier, not simply a data -dependency barrier to make it work correctly. Consider the following bit of -code: +A load-load control dependency requires a full read memory barrier, not +simply a data dependency barrier to make it work correctly. Consider the +following bit of code: q = ACCESS_ONCE(a); if (q) { @@ -615,14 +615,15 @@ case what's actually required is: } However, stores are not speculated. This means that ordering -is- provided -in the following example: +for load-store control dependencies, as in the following example: q = ACCESS_ONCE(a); if (q) { ACCESS_ONCE(b) = p; } -Please note that ACCESS_ONCE() is not optional! Without the +Control dependencies pair normally with other types of barriers. +That said, please note that ACCESS_ONCE() is not optional! Without the ACCESS_ONCE(), might combine the load from 'a' with other loads from 'a', and the store to 'b' with other stores to 'b', with possible highly counterintuitive effects on ordering. @@ -813,6 +814,8 @@ In summary: barrier() can help to preserve your control dependency. Please see the Compiler Barrier section for more information. + (*) Control dependencies pair normally with other types of barriers. + (*) Control dependencies do -not- provide transitivity. If you need transitivity, use smp_mb(). @@ -823,14 +826,14 @@ SMP BARRIER PAIRING When dealing with CPU-CPU interactions, certain types of memory barrier should always be paired. A lack of appropriate pairing is almost certainly an error. -General barriers pair with each other, though they also pair with -most other types of barriers, albeit without transitivity. An acquire -barrier pairs with a release barrier, but both may also pair with other -barriers, including of course general barriers. A write barrier pairs -with a data dependency barrier, an acquire barrier, a release barrier, -a read barrier, or a general barrier. Similarly a read barrier or a -data dependency barrier pairs with a write barrier, an acquire barrier, -a release barrier, or a general barrier: +General barriers pair with each other, though they also pair with most +other types of barriers, albeit without transitivity. An acquire barrier +pairs with a release barrier, but both may also pair with other barriers, +including of course general barriers. A write barrier pairs with a data +dependency barrier, a control dependency, an acquire barrier, a release +barrier, a read barrier, or a general barrier. Similarly a read barrier, +control dependency, or a data dependency barrier pairs with a write +barrier, an acquire barrier, a release barrier, or a general barrier: CPU 1 CPU 2 =============== =============== @@ -850,6 +853,19 @@ Or: y = *x; +Or even: + + CPU 1 CPU 2 + =============== =============================== + r1 = ACCESS_ONCE(y); + + ACCESS_ONCE(y) = 1; if (r2 = ACCESS_ONCE(x)) { + + ACCESS_ONCE(y) = 1; + } + + assert(r1 == 0 || r2 == 0); + Basically, the read barrier always has to be there, even though it can be of the "weaker" type. @@ -1711,7 +1727,7 @@ There are some more advanced barrier functions: } The dma_rmb() allows us guarantee the device has released ownership - before we read the data from the descriptor, and he dma_wmb() allows + before we read the data from the descriptor, and the dma_wmb() allows us to guarantee the data is written to the descriptor before the device can see it now has ownership. The wmb() is needed to guarantee that the cache coherent memory writes have completed before attempting a write to diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt index ea03abfc97e95dc660b8028559d940357bc1c8f7..ce2cfcf35c27a0d0972547e82f61fbc38c85b5ab 100644 --- a/Documentation/memory-hotplug.txt +++ b/Documentation/memory-hotplug.txt @@ -149,7 +149,7 @@ For example, assume 1GiB memory block size. A device for a memory starting at (0x100000000 / 1Gib = 4) This device covers address range [0x100000000 ... 0x140000000) -Under each memory block, you can see 4 files: +Under each memory block, you can see 5 files: /sys/devices/system/memory/memoryXXX/phys_index /sys/devices/system/memory/memoryXXX/phys_device @@ -359,38 +359,51 @@ Need more implementation yet.... -------------------------------- 8. Memory hotplug event notifier -------------------------------- -Memory hotplug has event notifier. There are 6 types of notification. +Hotplugging events are sent to a notification queue. -MEMORY_GOING_ONLINE +There are six types of notification defined in include/linux/memory.h: + +MEM_GOING_ONLINE Generated before new memory becomes available in order to be able to prepare subsystems to handle memory. The page allocator is still unable to allocate from the new memory. -MEMORY_CANCEL_ONLINE +MEM_CANCEL_ONLINE Generated if MEMORY_GOING_ONLINE fails. -MEMORY_ONLINE +MEM_ONLINE Generated when memory has successfully brought online. The callback may allocate pages from the new memory. -MEMORY_GOING_OFFLINE +MEM_GOING_OFFLINE Generated to begin the process of offlining memory. Allocations are no longer possible from the memory but some of the memory to be offlined is still in use. The callback can be used to free memory known to a subsystem from the indicated memory block. -MEMORY_CANCEL_OFFLINE +MEM_CANCEL_OFFLINE Generated if MEMORY_GOING_OFFLINE fails. Memory is available again from the memory block that we attempted to offline. -MEMORY_OFFLINE +MEM_OFFLINE Generated after offlining memory is complete. -A callback routine can be registered by +A callback routine can be registered by calling + hotplug_memory_notifier(callback_func, priority) -The second argument of callback function (action) is event types of above. -The third argument is passed by pointer of struct memory_notify. +Callback functions with higher values of priority are called before callback +functions with lower values. + +A callback function must have the following prototype: + + int callback_func( + struct notifier_block *self, unsigned long action, void *arg); + +The first argument of the callback function (self) is a pointer to the block +of the notifier chain that points to the callback function itself. +The second argument (action) is one of the event types described above. +The third argument (arg) passes a pointer of struct memory_notify. struct memory_notify { unsigned long start_pfn; @@ -412,6 +425,18 @@ node loses all memory. If this is -1, then nodemask status is not changed. If status_changed_nid* >= 0, callback should create/discard structures for the node if necessary. +The callback routine shall return one of the values +NOTIFY_DONE, NOTIFY_OK, NOTIFY_BAD, NOTIFY_STOP +defined in include/linux/notifier.h + +NOTIFY_DONE and NOTIFY_OK have no effect on the further processing. + +NOTIFY_BAD is used as response to the MEM_GOING_ONLINE, MEM_GOING_OFFLINE, +MEM_ONLINE, or MEM_OFFLINE action to cancel hotplugging. It stops +further processing of the notification queue. + +NOTIFY_STOP stops further processing of the notification queue. + -------------- 9. Future Work -------------- diff --git a/Documentation/module-signing.txt b/Documentation/module-signing.txt index 09c2382ad0556b196a3b4bb941b9e86597e8ebc5..c72702ec1ded8b0b5d728e6cd0519a5862d2d3c7 100644 --- a/Documentation/module-signing.txt +++ b/Documentation/module-signing.txt @@ -119,9 +119,9 @@ Most notably, in the x509.genkey file, the req_distinguished_name section should be altered from the default: [ req_distinguished_name ] - O = Magrathea - CN = Glacier signing key - emailAddress = slartibartfast@magrathea.h2g2 + #O = Unspecified company + CN = Build time autogenerated kernel key + #emailAddress = unspecified.user@unspecified.company The generated RSA key size can also be set with: diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt index 0a2859a8ee7ec66e6f2da253ca345b9d0f6d4ed1..5abad1e921ca810c1e765d1d84d1ca4a50ce5016 100644 --- a/Documentation/networking/can.txt +++ b/Documentation/networking/can.txt @@ -22,7 +22,8 @@ This file contains 4.1.3 RAW socket option CAN_RAW_LOOPBACK 4.1.4 RAW socket option CAN_RAW_RECV_OWN_MSGS 4.1.5 RAW socket option CAN_RAW_FD_FRAMES - 4.1.6 RAW socket returned message flags + 4.1.6 RAW socket option CAN_RAW_JOIN_FILTERS + 4.1.7 RAW socket returned message flags 4.2 Broadcast Manager protocol sockets (SOCK_DGRAM) 4.2.1 Broadcast Manager operations 4.2.2 Broadcast Manager message flags @@ -601,7 +602,22 @@ solution for a couple of reasons: CAN FD frames by checking if the device maximum transfer unit is CANFD_MTU. The CAN device MTU can be retrieved e.g. with a SIOCGIFMTU ioctl() syscall. - 4.1.6 RAW socket returned message flags + 4.1.6 RAW socket option CAN_RAW_JOIN_FILTERS + + The CAN_RAW socket can set multiple CAN identifier specific filters that + lead to multiple filters in the af_can.c filter processing. These filters + are indenpendent from each other which leads to logical OR'ed filters when + applied (see 4.1.1). + + This socket option joines the given CAN filters in the way that only CAN + frames are passed to user space that matched *all* given CAN filters. The + semantic for the applied filters is therefore changed to a logical AND. + + This is useful especially when the filterset is a combination of filters + where the CAN_INV_FILTER flag is set in order to notch single CAN IDs or + CAN ID ranges from the incoming traffic. + + 4.1.7 RAW socket returned message flags When using recvmsg() call, the msg->msg_flags may contain following flags: diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt index 9930ecfbb4658f7bd93969b52440e49eeb753de2..135581f015e1eb4298c063ebd938ccf2ec2cb461 100644 --- a/Documentation/networking/filter.txt +++ b/Documentation/networking/filter.txt @@ -280,7 +280,8 @@ Possible BPF extensions are shown in the following table: rxhash skb->hash cpu raw_smp_processor_id() vlan_tci skb_vlan_tag_get(skb) - vlan_pr skb_vlan_tag_present(skb) + vlan_avail skb_vlan_tag_present(skb) + vlan_tpid skb->vlan_proto rand prandom_u32() These extensions can also be prefixed with '#'. diff --git a/Documentation/networking/igb.txt b/Documentation/networking/igb.txt index 43d3549366a09d6cfbb7e4b284bb01d04fd314a0..15534fdd09a88f97a8d9c20b72666d6eff93dd0d 100644 --- a/Documentation/networking/igb.txt +++ b/Documentation/networking/igb.txt @@ -42,10 +42,10 @@ Additional Configurations Jumbo Frames ------------ Jumbo Frames support is enabled by changing the MTU to a value larger than - the default of 1500. Use the ifconfig command to increase the MTU size. + the default of 1500. Use the ip command to increase the MTU size. For example: - ifconfig eth mtu 9000 up + ip link set dev eth mtu 9000 This setting is not saved across reboots. diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 1b8c964b0d175c7d86d86896469650e5c59fa689..071fb18dc57c868e99367f9d3872bc0e91401414 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -388,6 +388,16 @@ tcp_mtu_probing - INTEGER 1 - Disabled by default, enabled when an ICMP black hole detected 2 - Always enabled, use initial MSS of tcp_base_mss. +tcp_probe_interval - INTEGER + Controls how often to start TCP Packetization-Layer Path MTU + Discovery reprobe. The default is reprobing every 10 minutes as + per RFC4821. + +tcp_probe_threshold - INTEGER + Controls when TCP Packetization-Layer Path MTU Discovery probing + will stop in respect to the width of search range in bytes. Default + is 8 bytes. + tcp_no_metrics_save - BOOLEAN By default, TCP saves various connection metrics in the route cache when the connection closes, so that connections established in the @@ -1116,11 +1126,23 @@ arp_accept - BOOLEAN gratuitous arp frame, the arp table will be updated regardless if this setting is on or off. +mcast_solicit - INTEGER + The maximum number of multicast probes in INCOMPLETE state, + when the associated hardware address is unknown. Defaults + to 3. + +ucast_solicit - INTEGER + The maximum number of unicast probes in PROBE state, when + the hardware address is being reconfirmed. Defaults to 3. app_solicit - INTEGER The maximum number of probes to send to the user space ARP daemon via netlink before dropping back to multicast probes (see - mcast_solicit). Defaults to 0. + mcast_resolicit). Defaults to 0. + +mcast_resolicit - INTEGER + The maximum number of multicast probes after unicast and + app probes in PROBE state. Defaults to 0. disable_policy - BOOLEAN Disable IPSEC policy (SPD) for this interface @@ -1198,6 +1220,17 @@ anycast_src_echo_reply - BOOLEAN FALSE: disabled Default: FALSE +idgen_delay - INTEGER + Controls the delay in seconds after which time to retry + privacy stable address generation if a DAD conflict is + detected. + Default: 1 (as specified in RFC7217) + +idgen_retries - INTEGER + Controls the number of retries to generate a stable privacy + address if a DAD conflict is detected. + Default: 3 (as specified in RFC7217) + mld_qrv - INTEGER Controls the MLD query robustness variable (see RFC3810 9.1). Default: 2 (as specified by RFC3810 9.1) @@ -1518,6 +1551,20 @@ use_optimistic - BOOLEAN 0: disabled (default) 1: enabled +stable_secret - IPv6 address + This IPv6 address will be used as a secret to generate IPv6 + addresses for link-local addresses and autoconfigured + ones. All addresses generated after setting this secret will + be stable privacy ones by default. This can be changed via the + addrgenmode ip-link. conf/default/stable_secret is used as the + secret for the namespace, the interface specific ones can + overwrite that. Writes to conf/all/stable_secret are refused. + + It is recommended to generate this secret during installation + of a system and keep it stable after that. + + By default the stable secret is unset. + icmp/*: ratelimit - INTEGER Limit the maximal rates for sending ICMPv6 packets. diff --git a/Documentation/networking/ipvs-sysctl.txt b/Documentation/networking/ipvs-sysctl.txt index 7a3c047295914cbc8c4273506a9b6d35246a1750..3ba709531adba970595251fa73d6d471ed14c5c1 100644 --- a/Documentation/networking/ipvs-sysctl.txt +++ b/Documentation/networking/ipvs-sysctl.txt @@ -22,6 +22,27 @@ backup_only - BOOLEAN If set, disable the director function while the server is in backup mode to avoid packet loops for DR/TUN methods. +conn_reuse_mode - INTEGER + 1 - default + + Controls how ipvs will deal with connections that are detected + port reuse. It is a bitmap, with the values being: + + 0: disable any special handling on port reuse. The new + connection will be delivered to the same real server that was + servicing the previous connection. This will effectively + disable expire_nodest_conn. + + bit 1: enable rescheduling of new connections when it is safe. + That is, whenever expire_nodest_conn and for TCP sockets, when + the connection is in TIME_WAIT state (which is only possible if + you use NAT mode). + + bit 2: it is bit 1 plus, for TCP connections, when connections + are in FIN_WAIT state, as this is the last state seen by load + balancer in Direct Routing mode. This bit helps on adding new + real servers to a very busy cluster. + conntrack - BOOLEAN 0 - disabled (default) not 0 - enabled diff --git a/Documentation/networking/ixgb.txt b/Documentation/networking/ixgb.txt index 1e0c045e89f7dc12f5c2ccf016020e6e2fdb2857..9b4a10a1cf50b4513eecaa6e638051a356c34efa 100644 --- a/Documentation/networking/ixgb.txt +++ b/Documentation/networking/ixgb.txt @@ -39,7 +39,7 @@ Channel Bonding documentation can be found in the Linux kernel source: The driver information previously displayed in the /proc filesystem is not supported in this release. Alternatively, you can use ethtool (version 1.6 -or later), lspci, and ifconfig to obtain the same information. +or later), lspci, and iproute2 to obtain the same information. Instructions on updating ethtool can be found in the section "Additional Configurations" later in this document. @@ -90,7 +90,7 @@ select m for "Intel(R) PRO/10GbE support" located at: 3. Assign an IP address to the interface by entering the following, where x is the interface number: - ifconfig ethx + ip addr add ethx 4. Verify that the interface works. Enter the following, where is the IP address for another machine on the same subnet as the interface @@ -177,7 +177,7 @@ NOTE: These changes are only suggestions, and serve as a starting point for tuning your network performance. The changes are made in three major ways, listed in order of greatest effect: -- Use ifconfig to modify the mtu (maximum transmission unit) and the txqueuelen +- Use ip link to modify the mtu (maximum transmission unit) and the txqueuelen parameter. - Use sysctl to modify /proc parameters (essentially kernel tuning) - Use setpci to modify the MMRBC field in PCI-X configuration space to increase @@ -202,7 +202,7 @@ setpci -d 8086:1a48 e6.b=2e # to change as well. # set the txqueuelen # your ixgb adapter should be loaded as eth1 for this to work, change if needed -ifconfig eth1 mtu 9000 txqueuelen 1000 up +ip li set dev eth1 mtu 9000 txqueuelen 1000 up # call the sysctl utility to modify /proc/sys entries sysctl -p ./sysctl_ixgb.conf - END ixgb_perf.sh @@ -297,10 +297,10 @@ Additional Configurations ------------ The driver supports Jumbo Frames for all adapters. Jumbo Frames support is enabled by changing the MTU to a value larger than the default of 1500. - The maximum value for the MTU is 16114. Use the ifconfig command to + The maximum value for the MTU is 16114. Use the ip command to increase the MTU size. For example: - ifconfig ethx mtu 9000 up + ip li set dev ethx mtu 9000 The maximum MTU setting for Jumbo Frames is 16114. This value coincides with the maximum Jumbo Frames size of 16128. diff --git a/Documentation/networking/ixgbe.txt b/Documentation/networking/ixgbe.txt index 0ace6e776ac86d93c9f96f4ca1814eee71454624..6f0cb57b59c6b3713b3428c0dfadbbec46972ab5 100644 --- a/Documentation/networking/ixgbe.txt +++ b/Documentation/networking/ixgbe.txt @@ -70,10 +70,10 @@ Avago 1000BASE-T SFP ABCU-5710RZ 82599-based adapters support all passive and active limiting direct attach cables that comply with SFF-8431 v4.1 and SFF-8472 v10.4 specifications. -Laser turns off for SFP+ when ifconfig down +Laser turns off for SFP+ when device is down ------------------------------------------- -"ifconfig down" turns off the laser for 82599-based SFP+ fiber adapters. -"ifconfig up" turns on the laser. +"ip link set down" turns off the laser for 82599-based SFP+ fiber adapters. +"ip link set up" turns on the laser. 82598-BASED ADAPTERS @@ -213,13 +213,13 @@ Additional Configurations ------------ The driver supports Jumbo Frames for all adapters. Jumbo Frames support is enabled by changing the MTU to a value larger than the default of 1500. - The maximum value for the MTU is 16110. Use the ifconfig command to + The maximum value for the MTU is 16110. Use the ip command to increase the MTU size. For example: - ifconfig ethx mtu 9000 up + ip link set dev ethx mtu 9000 - The maximum MTU setting for Jumbo Frames is 16110. This value coincides - with the maximum Jumbo Frames size of 16128. + The maximum MTU setting for Jumbo Frames is 9710. This value coincides + with the maximum Jumbo Frames size of 9728. Generic Receive Offload, aka GRO -------------------------------- diff --git a/Documentation/networking/mpls-sysctl.txt b/Documentation/networking/mpls-sysctl.txt new file mode 100644 index 0000000000000000000000000000000000000000..9ed15f86c17c86ffa69fa3527e932b62f4b9ee20 --- /dev/null +++ b/Documentation/networking/mpls-sysctl.txt @@ -0,0 +1,29 @@ +/proc/sys/net/mpls/* Variables: + +platform_labels - INTEGER + Number of entries in the platform label table. It is not + possible to configure forwarding for label values equal to or + greater than the number of platform labels. + + A dense utliziation of the entries in the platform label table + is possible and expected aas the platform labels are locally + allocated. + + If the number of platform label table entries is set to 0 no + label will be recognized by the kernel and mpls forwarding + will be disabled. + + Reducing this value will remove all label routing entries that + no longer fit in the table. + + Possible values: 0 - 1048575 + Default: 0 + +conf//input - BOOL + Control whether packets can be input on this interface. + + If disabled, packets will be discarded without further + processing. + + 0 - disabled (default) + not 0 - enabled diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt index a6d7cb91069e207b24bae3a2f4e2925475639640..daa015af16a092a8d4b7fd1df73f2bbe282251d9 100644 --- a/Documentation/networking/packet_mmap.txt +++ b/Documentation/networking/packet_mmap.txt @@ -440,9 +440,10 @@ and the following flags apply: +++ Capture process: from include/linux/if_packet.h - #define TP_STATUS_COPY 2 - #define TP_STATUS_LOSING 4 - #define TP_STATUS_CSUMNOTREADY 8 + #define TP_STATUS_COPY (1 << 1) + #define TP_STATUS_LOSING (1 << 2) + #define TP_STATUS_CSUMNOTREADY (1 << 3) + #define TP_STATUS_CSUM_VALID (1 << 7) TP_STATUS_COPY : This flag indicates that the frame (and associated meta information) has been truncated because it's @@ -466,6 +467,12 @@ TP_STATUS_CSUMNOTREADY: currently it's used for outgoing IP packets which reading the packet we should not try to check the checksum. +TP_STATUS_CSUM_VALID : This flag indicates that at least the transport + header checksum of the packet has been already + validated on the kernel side. If the flag is not set + then we are free to check the checksum by ourselves + provided that TP_STATUS_CSUMNOTREADY is also not set. + for convenience there are also the following defines: #define TP_STATUS_KERNEL 0 diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt index 6915c6b2786972b8afde6b91c1695df0cf993c08..0344f1d45b3765b016f0388a830e3a8e48af31ce 100644 --- a/Documentation/networking/pktgen.txt +++ b/Documentation/networking/pktgen.txt @@ -3,13 +3,11 @@ HOWTO for the linux packet generator ------------------------------------ -Date: 041221 - -Enable CONFIG_NET_PKTGEN to compile and build pktgen.o either in kernel -or as module. Module is preferred. insmod pktgen if needed. Once running -pktgen creates a thread on each CPU where each thread has affinity to its CPU. -Monitoring and controlling is done via /proc. Easiest to select a suitable -a sample script and configure. +Enable CONFIG_NET_PKTGEN to compile and build pktgen either in-kernel +or as a module. A module is preferred; modprobe pktgen if needed. Once +running, pktgen creates a thread for each CPU with affinity to that CPU. +Monitoring and controlling is done via /proc. It is easiest to select a +suitable sample script and configure that. On a dual CPU: @@ -27,7 +25,7 @@ For monitoring and control pktgen creates: Tuning NIC for max performance ============================== -The default NIC setting are (likely) not tuned for pktgen's artificial +The default NIC settings are (likely) not tuned for pktgen's artificial overload type of benchmarking, as this could hurt the normal use-case. Specifically increasing the TX ring buffer in the NIC: @@ -35,20 +33,20 @@ Specifically increasing the TX ring buffer in the NIC: A larger TX ring can improve pktgen's performance, while it can hurt in the general case, 1) because the TX ring buffer might get larger -than the CPUs L1/L2 cache, 2) because it allow more queueing in the +than the CPU's L1/L2 cache, 2) because it allows more queueing in the NIC HW layer (which is bad for bufferbloat). -One should be careful to conclude, that packets/descriptors in the HW +One should hesitate to conclude that packets/descriptors in the HW TX ring cause delay. Drivers usually delay cleaning up the -ring-buffers (for various performance reasons), thus packets stalling -the TX ring, might just be waiting for cleanup. +ring-buffers for various performance reasons, and packets stalling +the TX ring might just be waiting for cleanup. -This cleanup issues is specifically the case, for the driver ixgbe -(Intel 82599 chip). This driver (ixgbe) combine TX+RX ring cleanups, +This cleanup issue is specifically the case for the driver ixgbe +(Intel 82599 chip). This driver (ixgbe) combines TX+RX ring cleanups, and the cleanup interval is affected by the ethtool --coalesce setting of parameter "rx-usecs". -For ixgbe use e.g "30" resulting in approx 33K interrupts/sec (1/30*10^6): +For ixgbe use e.g. "30" resulting in approx 33K interrupts/sec (1/30*10^6): # ethtool -C ethX rx-usecs 30 @@ -60,15 +58,16 @@ Running: Stopped: eth1 Result: OK: max_before_softirq=10000 -Most important the devices assigned to thread. Note! A device can only belong -to one thread. +Most important are the devices assigned to the thread. Note that a +device can only belong to one thread. Viewing devices =============== -Parm section holds configured info. Current hold running stats. -Result is printed after run or after interruption. Example: +The Params section holds configured information. The Current section +holds running statistics. The Result is printed after a run or after +interruption. Example: /proc/net/pktgen/eth1 @@ -93,7 +92,8 @@ Result: OK: 13101142(c12220741+d880401) usec, 10000000 (60byte,0frags) Configuring threads and devices ================================ -This is done via the /proc interface easiest done via pgset in the scripts +This is done via the /proc interface, and most easily done via pgset +as defined in the sample scripts. Examples: @@ -192,10 +192,11 @@ Examples: pgset "rate 300M" set rate to 300 Mb/s pgset "ratep 1000000" set rate to 1Mpps -Example scripts -=============== +Sample scripts +============== -A collection of small tutorial scripts for pktgen is in examples dir. +A collection of small tutorial scripts for pktgen is in the +samples/pktgen directory: pktgen.conf-1-1 # 1 CPU 1 dev pktgen.conf-1-2 # 1 CPU 2 dev @@ -206,25 +207,26 @@ pktgen.conf-1-1-ip6 # 1 CPU 1 dev ipv6 pktgen.conf-1-1-ip6-rdos # 1 CPU 1 dev ipv6 w. route DoS pktgen.conf-1-1-flows # 1 CPU 1 dev multiple flows. -Run in shell: ./pktgen.conf-X-Y It does all the setup including sending. +Run in shell: ./pktgen.conf-X-Y +This does all the setup including sending. Interrupt affinity =================== -Note when adding devices to a specific CPU there good idea to also assign -/proc/irq/XX/smp_affinity so the TX-interrupts gets bound to the same CPU. -as this reduces cache bouncing when freeing skb's. +Note that when adding devices to a specific CPU it is a good idea to +also assign /proc/irq/XX/smp_affinity so that the TX interrupts are bound +to the same CPU. This reduces cache bouncing when freeing skbs. Enable IPsec ============ -Default IPsec transformation with ESP encapsulation plus Transport mode -could be enabled by simply setting: +Default IPsec transformation with ESP encapsulation plus transport mode +can be enabled by simply setting: pgset "flag IPSEC" pgset "flows 1" To avoid breaking existing testbed scripts for using AH type and tunnel mode, -user could use "pgset spi SPI_VALUE" to specify which formal of transformation +you can use "pgset spi SPI_VALUE" to specify which transformation mode to employ. diff --git a/Documentation/networking/rds.txt b/Documentation/networking/rds.txt index c67077cbeb800a1265f1e2ba801fb293fa0d43f8..e1a3d59bbe0f5f7e75889776dfb0979a7ef20cff 100644 --- a/Documentation/networking/rds.txt +++ b/Documentation/networking/rds.txt @@ -62,11 +62,10 @@ Socket Interface ================ AF_RDS, PF_RDS, SOL_RDS - These constants haven't been assigned yet, because RDS isn't in - mainline yet. Currently, the kernel module assigns some constant - and publishes it to user space through two sysctl files - /proc/sys/net/rds/pf_rds - /proc/sys/net/rds/sol_rds + AF_RDS and PF_RDS are the domain type to be used with socket(2) + to create RDS sockets. SOL_RDS is the socket-level to be used + with setsockopt(2) and getsockopt(2) for RDS specific socket + options. fd = socket(PF_RDS, SOCK_SEQPACKET, 0); This creates a new, unbound RDS socket. diff --git a/Documentation/networking/s2io.txt b/Documentation/networking/s2io.txt index d2a9f43b5546684fec415e957617869e418ed140..0362a42f7cf4478b8592d02f20d3128acd560ead 100644 --- a/Documentation/networking/s2io.txt +++ b/Documentation/networking/s2io.txt @@ -38,7 +38,7 @@ The corresponding adapter's LED will blink multiple times. 3. Features supported: a. Jumbo frames. Xframe I/II supports MTU up to 9600 bytes, -modifiable using ifconfig command. +modifiable using ip command. b. Offloads. Supports checksum offload(TCP/UDP/IP) on transmit and receive, TSO. diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt index 99ca40e8e810888d30bbb9726eb2de2e537c3e79..59f4db2a0c85c02df4f6cee3176ceb173333cac1 100644 --- a/Documentation/networking/scaling.txt +++ b/Documentation/networking/scaling.txt @@ -282,7 +282,7 @@ following is true: - The current CPU's queue head counter >= the recorded tail counter value in rps_dev_flow[i] -- The current CPU is unset (equal to RPS_NO_CPU) +- The current CPU is unset (>= nr_cpu_ids) - The current CPU is offline After this check, the packet is sent to the (possibly updated) current @@ -421,6 +421,15 @@ best CPUs to share a given queue are probably those that share the cache with the CPU that processes transmit completions for that queue (transmit interrupts). +Per TX Queue rate limitation: +============================= + +These are rate-limitation mechanisms implemented by HW, where currently +a max-rate attribute is supported, by setting a Mbps value to + +/sys/class/net//queues/tx-/tx_maxrate + +A value of zero means disabled, and this is the default. Further Information =================== diff --git a/Documentation/networking/vxge.txt b/Documentation/networking/vxge.txt index bb76c667a476557df0416a43f2ad622247fbd65c..abfec245f97c6aa9cc6e4bc40dcf8c2324f496ec 100644 --- a/Documentation/networking/vxge.txt +++ b/Documentation/networking/vxge.txt @@ -39,7 +39,7 @@ iii) PCI-SIG's I/O Virtualization iv) Jumbo frames X3100 Series supports MTU up to 9600 bytes, modifiable using - ifconfig command. + ip command. v) Offloads supported: (Enabled by default) Checksum offload (TCP/UDP/IP) on transmit and receive paths diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index b8f2147b96dd90afd16cd742a40be40f64a09c89..a9b47163bb5d6903f4c8f6fa436fca5977e4556d 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -72,7 +72,6 @@ static struct pinctrl_desc foo_desc = { .name = "foo", .pins = foo_pins, .npins = ARRAY_SIZE(foo_pins), - .maxpin = 63, .owner = THIS_MODULE, }; @@ -164,8 +163,8 @@ static const char *foo_get_group_name(struct pinctrl_dev *pctldev, } static int foo_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector, - unsigned ** const pins, - unsigned * const num_pins) + const unsigned **pins, + unsigned *num_pins) { *pins = (unsigned *) foo_groups[selector].pins; *num_pins = foo_groups[selector].num_pins; @@ -570,9 +569,8 @@ is possible to perform the requested mux setting, poke the hardware so that this happens. Pinmux drivers are required to supply a few callback functions, some are -optional. Usually the enable() and disable() functions are implemented, -writing values into some certain registers to activate a certain mux setting -for a certain pin. +optional. Usually the set_mux() function is implemented, writing values into +some certain registers to activate a certain mux setting for a certain pin. A simple driver for the above example will work by setting bits 0, 1, 2, 3 or 4 into some register named MUX to select a certain function with a certain @@ -683,12 +681,12 @@ static const struct foo_pmx_func foo_functions[] = { }, }; -int foo_get_functions_count(struct pinctrl_dev *pctldev) +static int foo_get_functions_count(struct pinctrl_dev *pctldev) { return ARRAY_SIZE(foo_functions); } -const char *foo_get_fname(struct pinctrl_dev *pctldev, unsigned selector) +static const char *foo_get_fname(struct pinctrl_dev *pctldev, unsigned selector) { return foo_functions[selector].name; } @@ -702,7 +700,7 @@ static int foo_get_groups(struct pinctrl_dev *pctldev, unsigned selector, return 0; } -int foo_set_mux(struct pinctrl_dev *pctldev, unsigned selector, +static int foo_set_mux(struct pinctrl_dev *pctldev, unsigned selector, unsigned group) { u8 regbit = (1 << selector + group); @@ -711,7 +709,7 @@ int foo_set_mux(struct pinctrl_dev *pctldev, unsigned selector, return 0; } -struct pinmux_ops foo_pmxops = { +static struct pinmux_ops foo_pmxops = { .get_functions_count = foo_get_functions_count, .get_function_name = foo_get_fname, .get_function_groups = foo_get_groups, @@ -1266,7 +1264,7 @@ The semantics of the pinctrl APIs are: Usually the pin control core handled the get/put pair and call out to the device drivers bookkeeping operations, like checking available functions and -the associated pins, whereas the enable/disable pass on to the pin controller +the associated pins, whereas select_state pass on to the pin controller driver which takes care of activating and/or deactivating the mux setting by quickly poking some registers. @@ -1363,8 +1361,9 @@ function, but with different named in the mapping as described under "Advanced mapping" above. So that for an SPI device, we have two states named "pos-A" and "pos-B". -This snippet first muxes the function in the pins defined by group A, enables -it, disables and releases it, and muxes it in on the pins defined by group B: +This snippet first initializes a state object for both groups (in foo_probe()), +then muxes the function in the pins defined by group A, and finally muxes it in +on the pins defined by group B: #include diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt index edeecd447d23dc8ff26e66debe0d874b9482f087..b96098ccfe69208cf7491c1c4885563310398bf5 100644 --- a/Documentation/power/basic-pm-debugging.txt +++ b/Documentation/power/basic-pm-debugging.txt @@ -75,12 +75,14 @@ you should do the following: # echo platform > /sys/power/disk # echo disk > /sys/power/state -Then, the kernel will try to freeze processes, suspend devices, wait 5 seconds, -resume devices and thaw processes. If "platform" is written to +Then, the kernel will try to freeze processes, suspend devices, wait a few +seconds (5 by default, but configurable by the suspend.pm_test_delay module +parameter), resume devices and thaw processes. If "platform" is written to /sys/power/pm_test , then after suspending devices the kernel will additionally invoke the global control methods (eg. ACPI global control methods) used to -prepare the platform firmware for hibernation. Next, it will wait 5 seconds and -invoke the platform (eg. ACPI) global methods used to cancel hibernation etc. +prepare the platform firmware for hibernation. Next, it will wait a +configurable number of seconds and invoke the platform (eg. ACPI) global +methods used to cancel hibernation etc. Writing "none" to /sys/power/pm_test causes the kernel to switch to the normal hibernation/suspend operations. Also, when open for reading, /sys/power/pm_test diff --git a/Documentation/powerpc/pci_iov_resource_on_powernv.txt b/Documentation/powerpc/pci_iov_resource_on_powernv.txt new file mode 100644 index 0000000000000000000000000000000000000000..b55c5cd83f8d76df8cf530faccfc5d8974f13d01 --- /dev/null +++ b/Documentation/powerpc/pci_iov_resource_on_powernv.txt @@ -0,0 +1,301 @@ +Wei Yang +Benjamin Herrenschmidt +Bjorn Helgaas +26 Aug 2014 + +This document describes the requirement from hardware for PCI MMIO resource +sizing and assignment on PowerKVM and how generic PCI code handles this +requirement. The first two sections describe the concepts of Partitionable +Endpoints and the implementation on P8 (IODA2). The next two sections talks +about considerations on enabling SRIOV on IODA2. + +1. Introduction to Partitionable Endpoints + +A Partitionable Endpoint (PE) is a way to group the various resources +associated with a device or a set of devices to provide isolation between +partitions (i.e., filtering of DMA, MSIs etc.) and to provide a mechanism +to freeze a device that is causing errors in order to limit the possibility +of propagation of bad data. + +There is thus, in HW, a table of PE states that contains a pair of "frozen" +state bits (one for MMIO and one for DMA, they get set together but can be +cleared independently) for each PE. + +When a PE is frozen, all stores in any direction are dropped and all loads +return all 1's value. MSIs are also blocked. There's a bit more state that +captures things like the details of the error that caused the freeze etc., but +that's not critical. + +The interesting part is how the various PCIe transactions (MMIO, DMA, ...) +are matched to their corresponding PEs. + +The following section provides a rough description of what we have on P8 +(IODA2). Keep in mind that this is all per PHB (PCI host bridge). Each PHB +is a completely separate HW entity that replicates the entire logic, so has +its own set of PEs, etc. + +2. Implementation of Partitionable Endpoints on P8 (IODA2) + +P8 supports up to 256 Partitionable Endpoints per PHB. + + * Inbound + + For DMA, MSIs and inbound PCIe error messages, we have a table (in + memory but accessed in HW by the chip) that provides a direct + correspondence between a PCIe RID (bus/dev/fn) with a PE number. + We call this the RTT. + + - For DMA we then provide an entire address space for each PE that can + contain two "windows", depending on the value of PCI address bit 59. + Each window can be configured to be remapped via a "TCE table" (IOMMU + translation table), which has various configurable characteristics + not described here. + + - For MSIs, we have two windows in the address space (one at the top of + the 32-bit space and one much higher) which, via a combination of the + address and MSI value, will result in one of the 2048 interrupts per + bridge being triggered. There's a PE# in the interrupt controller + descriptor table as well which is compared with the PE# obtained from + the RTT to "authorize" the device to emit that specific interrupt. + + - Error messages just use the RTT. + + * Outbound. That's where the tricky part is. + + Like other PCI host bridges, the Power8 IODA2 PHB supports "windows" + from the CPU address space to the PCI address space. There is one M32 + window and sixteen M64 windows. They have different characteristics. + First what they have in common: they forward a configurable portion of + the CPU address space to the PCIe bus and must be naturally aligned + power of two in size. The rest is different: + + - The M32 window: + + * Is limited to 4GB in size. + + * Drops the top bits of the address (above the size) and replaces + them with a configurable value. This is typically used to generate + 32-bit PCIe accesses. We configure that window at boot from FW and + don't touch it from Linux; it's usually set to forward a 2GB + portion of address space from the CPU to PCIe + 0x8000_0000..0xffff_ffff. (Note: The top 64KB are actually + reserved for MSIs but this is not a problem at this point; we just + need to ensure Linux doesn't assign anything there, the M32 logic + ignores that however and will forward in that space if we try). + + * It is divided into 256 segments of equal size. A table in the chip + maps each segment to a PE#. That allows portions of the MMIO space + to be assigned to PEs on a segment granularity. For a 2GB window, + the segment granularity is 2GB/256 = 8MB. + + Now, this is the "main" window we use in Linux today (excluding + SR-IOV). We basically use the trick of forcing the bridge MMIO windows + onto a segment alignment/granularity so that the space behind a bridge + can be assigned to a PE. + + Ideally we would like to be able to have individual functions in PEs + but that would mean using a completely different address allocation + scheme where individual function BARs can be "grouped" to fit in one or + more segments. + + - The M64 windows: + + * Must be at least 256MB in size. + + * Do not translate addresses (the address on PCIe is the same as the + address on the PowerBus). There is a way to also set the top 14 + bits which are not conveyed by PowerBus but we don't use this. + + * Can be configured to be segmented. When not segmented, we can + specify the PE# for the entire window. When segmented, a window + has 256 segments; however, there is no table for mapping a segment + to a PE#. The segment number *is* the PE#. + + * Support overlaps. If an address is covered by multiple windows, + there's a defined ordering for which window applies. + + We have code (fairly new compared to the M32 stuff) that exploits that + for large BARs in 64-bit space: + + We configure an M64 window to cover the entire region of address space + that has been assigned by FW for the PHB (about 64GB, ignore the space + for the M32, it comes out of a different "reserve"). We configure it + as segmented. + + Then we do the same thing as with M32, using the bridge alignment + trick, to match to those giant segments. + + Since we cannot remap, we have two additional constraints: + + - We do the PE# allocation *after* the 64-bit space has been assigned + because the addresses we use directly determine the PE#. We then + update the M32 PE# for the devices that use both 32-bit and 64-bit + spaces or assign the remaining PE# to 32-bit only devices. + + - We cannot "group" segments in HW, so if a device ends up using more + than one segment, we end up with more than one PE#. There is a HW + mechanism to make the freeze state cascade to "companion" PEs but + that only works for PCIe error messages (typically used so that if + you freeze a switch, it freezes all its children). So we do it in + SW. We lose a bit of effectiveness of EEH in that case, but that's + the best we found. So when any of the PEs freezes, we freeze the + other ones for that "domain". We thus introduce the concept of + "master PE" which is the one used for DMA, MSIs, etc., and "secondary + PEs" that are used for the remaining M64 segments. + + We would like to investigate using additional M64 windows in "single + PE" mode to overlay over specific BARs to work around some of that, for + example for devices with very large BARs, e.g., GPUs. It would make + sense, but we haven't done it yet. + +3. Considerations for SR-IOV on PowerKVM + + * SR-IOV Background + + The PCIe SR-IOV feature allows a single Physical Function (PF) to + support several Virtual Functions (VFs). Registers in the PF's SR-IOV + Capability control the number of VFs and whether they are enabled. + + When VFs are enabled, they appear in Configuration Space like normal + PCI devices, but the BARs in VF config space headers are unusual. For + a non-VF device, software uses BARs in the config space header to + discover the BAR sizes and assign addresses for them. For VF devices, + software uses VF BAR registers in the *PF* SR-IOV Capability to + discover sizes and assign addresses. The BARs in the VF's config space + header are read-only zeros. + + When a VF BAR in the PF SR-IOV Capability is programmed, it sets the + base address for all the corresponding VF(n) BARs. For example, if the + PF SR-IOV Capability is programmed to enable eight VFs, and it has a + 1MB VF BAR0, the address in that VF BAR sets the base of an 8MB region. + This region is divided into eight contiguous 1MB regions, each of which + is a BAR0 for one of the VFs. Note that even though the VF BAR + describes an 8MB region, the alignment requirement is for a single VF, + i.e., 1MB in this example. + + There are several strategies for isolating VFs in PEs: + + - M32 window: There's one M32 window, and it is split into 256 + equally-sized segments. The finest granularity possible is a 256MB + window with 1MB segments. VF BARs that are 1MB or larger could be + mapped to separate PEs in this window. Each segment can be + individually mapped to a PE via the lookup table, so this is quite + flexible, but it works best when all the VF BARs are the same size. If + they are different sizes, the entire window has to be small enough that + the segment size matches the smallest VF BAR, which means larger VF + BARs span several segments. + + - Non-segmented M64 window: A non-segmented M64 window is mapped entirely + to a single PE, so it could only isolate one VF. + + - Single segmented M64 windows: A segmented M64 window could be used just + like the M32 window, but the segments can't be individually mapped to + PEs (the segment number is the PE#), so there isn't as much + flexibility. A VF with multiple BARs would have to be in a "domain" of + multiple PEs, which is not as well isolated as a single PE. + + - Multiple segmented M64 windows: As usual, each window is split into 256 + equally-sized segments, and the segment number is the PE#. But if we + use several M64 windows, they can be set to different base addresses + and different segment sizes. If we have VFs that each have a 1MB BAR + and a 32MB BAR, we could use one M64 window to assign 1MB segments and + another M64 window to assign 32MB segments. + + Finally, the plan to use M64 windows for SR-IOV, which will be described + more in the next two sections. For a given VF BAR, we need to + effectively reserve the entire 256 segments (256 * VF BAR size) and + position the VF BAR to start at the beginning of a free range of + segments/PEs inside that M64 window. + + The goal is of course to be able to give a separate PE for each VF. + + The IODA2 platform has 16 M64 windows, which are used to map MMIO + range to PE#. Each M64 window defines one MMIO range and this range is + divided into 256 segments, with each segment corresponding to one PE. + + We decide to leverage this M64 window to map VFs to individual PEs, since + SR-IOV VF BARs are all the same size. + + But doing so introduces another problem: total_VFs is usually smaller + than the number of M64 window segments, so if we map one VF BAR directly + to one M64 window, some part of the M64 window will map to another + device's MMIO range. + + IODA supports 256 PEs, so segmented windows contain 256 segments, so if + total_VFs is less than 256, we have the situation in Figure 1.0, where + segments [total_VFs, 255] of the M64 window may map to some MMIO range on + other devices: + + 0 1 total_VFs - 1 + +------+------+- -+------+------+ + | | | ... | | | + +------+------+- -+------+------+ + + VF(n) BAR space + + 0 1 total_VFs - 1 255 + +------+------+- -+------+------+- -+------+------+ + | | | ... | | | ... | | | + +------+------+- -+------+------+- -+------+------+ + + M64 window + + Figure 1.0 Direct map VF(n) BAR space + + Our current solution is to allocate 256 segments even if the VF(n) BAR + space doesn't need that much, as shown in Figure 1.1: + + 0 1 total_VFs - 1 255 + +------+------+- -+------+------+- -+------+------+ + | | | ... | | | ... | | | + +------+------+- -+------+------+- -+------+------+ + + VF(n) BAR space + extra + + 0 1 total_VFs - 1 255 + +------+------+- -+------+------+- -+------+------+ + | | | ... | | | ... | | | + +------+------+- -+------+------+- -+------+------+ + + M64 window + + Figure 1.1 Map VF(n) BAR space + extra + + Allocating the extra space ensures that the entire M64 window will be + assigned to this one SR-IOV device and none of the space will be + available for other devices. Note that this only expands the space + reserved in software; there are still only total_VFs VFs, and they only + respond to segments [0, total_VFs - 1]. There's nothing in hardware that + responds to segments [total_VFs, 255]. + +4. Implications for the Generic PCI Code + +The PCIe SR-IOV spec requires that the base of the VF(n) BAR space be +aligned to the size of an individual VF BAR. + +In IODA2, the MMIO address determines the PE#. If the address is in an M32 +window, we can set the PE# by updating the table that translates segments +to PE#s. Similarly, if the address is in an unsegmented M64 window, we can +set the PE# for the window. But if it's in a segmented M64 window, the +segment number is the PE#. + +Therefore, the only way to control the PE# for a VF is to change the base +of the VF(n) BAR space in the VF BAR. If the PCI core allocates the exact +amount of space required for the VF(n) BAR space, the VF BAR value is fixed +and cannot be changed. + +On the other hand, if the PCI core allocates additional space, the VF BAR +value can be changed as long as the entire VF(n) BAR space remains inside +the space allocated by the core. + +Ideally the segment size will be the same as an individual VF BAR size. +Then each VF will be in its own PE. The VF BARs (and therefore the PE#s) +are contiguous. If VF0 is in PE(x), then VF(n) is in PE(x+n). If we +allocate 256 segments, there are (256 - numVFs) choices for the PE# of VF0. + +If the segment size is smaller than the VF BAR size, it will take several +segments to cover a VF BAR, and a VF will be in several PEs. This is +possible, but the isolation isn't as good, and it reduces the number of PE# +choices because instead of consuming only numVFs segments, the VF(n) BAR +space will consume (numVFs * n) segments. That means there aren't as many +available segments for adjusting base of the VF(n) BAR space. diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt index 9791e98ab49cf28826efb1c4551916280ac31b00..ded69794a5c09da762db7c4c61cc3d23e619d0fa 100644 --- a/Documentation/powerpc/transactional_memory.txt +++ b/Documentation/powerpc/transactional_memory.txt @@ -174,7 +174,7 @@ These are defined in , and distinguish different reasons why the kernel aborted a transaction: TM_CAUSE_RESCHED Thread was rescheduled. - TM_CAUSE_TLBI Software TLB invalide. + TM_CAUSE_TLBI Software TLB invalid. TM_CAUSE_FAC_UNAV FP/VEC/VSX unavailable trap. TM_CAUSE_SYSCALL Currently unused; future syscalls that must abort transactions for consistency will use this. @@ -185,7 +185,7 @@ kernel aborted a transaction: These can be checked by the user program's abort handler as TEXASR[0:7]. If bit 7 is set, it indicates that the error is consider persistent. For example -a TM_CAUSE_ALIGNMENT will be persistent while a TM_CAUSE_RESCHED will not.q +a TM_CAUSE_ALIGNMENT will be persistent while a TM_CAUSE_RESCHED will not. GDB === diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt index 5a615c14f75da79133db306179ccdd355bb0b4c4..2216eb187c213b4c0c5140a760f9df3098150e41 100644 --- a/Documentation/printk-formats.txt +++ b/Documentation/printk-formats.txt @@ -8,6 +8,21 @@ If variable is of Type, use printk format specifier: unsigned long long %llu or %llx size_t %zu or %zx ssize_t %zd or %zx + s32 %d or %x + u32 %u or %x + s64 %lld or %llx + u64 %llu or %llx + +If is dependent on a config option for its size (e.g., sector_t, +blkcnt_t) or is architecture-dependent for its size (e.g., tcflag_t), use a +format specifier of its largest possible type and explicitly cast to it. +Example: + + printk("test: sector number/total blocks: %llu/%llu\n", + (unsigned long long)sector, (unsigned long long)blockcount); + +Reminder: sizeof() result is of type size_t. + Raw pointer value SHOULD be printed with %p. The kernel supports the following extended format specifiers for pointer types: @@ -54,6 +69,7 @@ Struct Resources: For printing struct resources. The 'R' and 'r' specifiers result in a printed resource with ('R') or without ('r') a decoded flags member. + Passed by reference. Physical addresses types phys_addr_t: @@ -132,6 +148,8 @@ MAC/FDDI addresses: specifier to use reversed byte order suitable for visual interpretation of Bluetooth addresses which are in the little endian order. + Passed by reference. + IPv4 addresses: %pI4 1.2.3.4 @@ -146,6 +164,8 @@ IPv4 addresses: host, network, big or little endian order addresses respectively. Where no specifier is provided the default network/big endian order is used. + Passed by reference. + IPv6 addresses: %pI6 0001:0002:0003:0004:0005:0006:0007:0008 @@ -160,6 +180,8 @@ IPv6 addresses: print a compressed IPv6 address as described by http://tools.ietf.org/html/rfc5952 + Passed by reference. + IPv4/IPv6 addresses (generic, with port, flowinfo, scope): %pIS 1.2.3.4 or 0001:0002:0003:0004:0005:0006:0007:0008 @@ -186,6 +208,8 @@ IPv4/IPv6 addresses (generic, with port, flowinfo, scope): specifiers can be used as well and are ignored in case of an IPv6 address. + Passed by reference. + Further examples: %pISfc 1.2.3.4 or [1:2:3:4:5:6:7:8]/123456789 @@ -204,9 +228,11 @@ UUID/GUID addresses: lower ('l') or upper case ('L') hex characters - and big endian order in lower ('b') or upper case ('B') hex characters. - Where no additional specifiers are used the default little endian + Where no additional specifiers are used the default big endian order with lower case hex characters will be printed. + Passed by reference. + dentry names: %pd{,2,3,4} %pD{,2,3,4} @@ -216,6 +242,8 @@ dentry names: equivalent of %s dentry->d_name.name we used to use, %pd prints n last components. %pD does the same thing for struct file. + Passed by reference. + struct va_format: %pV @@ -231,23 +259,30 @@ struct va_format: Do not use this feature without some mechanism to verify the correctness of the format string and va_list arguments. -u64 SHOULD be printed with %llu/%llx: + Passed by reference. - printk("%llu", u64_var); +struct clk: -s64 SHOULD be printed with %lld/%llx: + %pC pll1 + %pCn pll1 + %pCr 1560000000 - printk("%lld", s64_var); + For printing struct clk structures. '%pC' and '%pCn' print the name + (Common Clock Framework) or address (legacy clock framework) of the + structure; '%pCr' prints the current clock rate. -If is dependent on a config option for its size (e.g., sector_t, -blkcnt_t) or is architecture-dependent for its size (e.g., tcflag_t), use a -format specifier of its largest possible type and explicitly cast to it. -Example: + Passed by reference. - printk("test: sector number/total blocks: %llu/%llu\n", - (unsigned long long)sector, (unsigned long long)blockcount); +bitmap and its derivatives such as cpumask and nodemask: -Reminder: sizeof() result is of type size_t. + %*pb 0779 + %*pbl 0,3-6,8-10 + + For printing bitmap and its derivatives such as cpumask and nodemask, + %*pb output the bitmap with field width as the number of bits and %*pbl + output the bitmap as range list with field width as the number of bits. + + Passed by reference. Thank you for your cooperation and attention. diff --git a/Documentation/scheduler/completion.txt b/Documentation/scheduler/completion.txt index f77651eca31ea0b32efea5ecdbf1f05f23e72eab..2622bc7a188b0519f87058773e6dc826c5e785a9 100644 --- a/Documentation/scheduler/completion.txt +++ b/Documentation/scheduler/completion.txt @@ -7,24 +7,24 @@ Introduction: ------------- If you have one or more threads of execution that must wait for some process -to have reached a point or a specific state, completions can provide a race -free solution to this problem. Semantically they are somewhat like a -pthread_barriers and have similar use-cases. +to have reached a point or a specific state, completions can provide a +race-free solution to this problem. Semantically they are somewhat like a +pthread_barrier and have similar use-cases. -Completions are a code synchronization mechanism that is preferable to any +Completions are a code synchronization mechanism which is preferable to any misuse of locks. Any time you think of using yield() or some quirky -msleep(1); loop to allow something else to proceed, you probably want to +msleep(1) loop to allow something else to proceed, you probably want to look into using one of the wait_for_completion*() calls instead. The -advantage of using completions is clear intent of the code but also more +advantage of using completions is clear intent of the code, but also more efficient code as both threads can continue until the result is actually needed. Completions are built on top of the generic event infrastructure in Linux, -with the event reduced to a simple flag appropriately called "done" in -struct completion, that tells the waiting threads of execution if they +with the event reduced to a simple flag (appropriately called "done") in +struct completion that tells the waiting threads of execution if they can continue safely. -As completions are scheduling related the code is found in +As completions are scheduling related, the code is found in kernel/sched/completion.c - for details on completion design and implementation see completions-design.txt @@ -32,9 +32,9 @@ implementation see completions-design.txt Usage: ------ -There are three parts to the using completions, the initialization of the +There are three parts to using completions, the initialization of the struct completion, the waiting part through a call to one of the variants of -wait_for_completion() and the signaling side through a call to complete(), +wait_for_completion() and the signaling side through a call to complete() or complete_all(). Further there are some helper functions for checking the state of completions. @@ -50,7 +50,7 @@ handling of completions is: providing the wait queue to place tasks on for waiting and the flag for indicating the state of affairs. -Completions should be named to convey the intent of the waiter. A good +Completions should be named to convey the intent of the waiter. A good example is: wait_for_completion(&early_console_added); @@ -73,7 +73,7 @@ the default state to "not available", that is, "done" is set to 0. The re-initialization function, reinit_completion(), simply resets the done element to "not available", thus again to 0, without touching the -wait queue. Calling init_completion() on the same completions object is +wait queue. Calling init_completion() twice on the same completion object is most likely a bug as it re-initializes the queue to an empty queue and enqueued tasks could get "lost" - use reinit_completion() in that case. @@ -87,10 +87,17 @@ initialization should always use: DECLARE_COMPLETION_ONSTACK(setup_done) suitable for automatic/local variables on the stack and will make lockdep -happy. Note also that one needs to making *sure* the completion passt to +happy. Note also that one needs to make *sure* the completion passed to work threads remains in-scope, and no references remain to on-stack data when the initiating function returns. +Using on-stack completions for code that calls any of the _timeout or +_interruptible/_killable variants is not advisable as they will require +additional synchronization to prevent the on-stack completion object in +the timeout/signal cases from going out of scope. Consider using dynamically +allocated completions when intending to use the _interruptible/_killable +or _timeout variants of wait_for_completion(). + Waiting for completions: ------------------------ @@ -99,34 +106,38 @@ For a thread of execution to wait for some concurrent work to finish, it calls wait_for_completion() on the initialized completion structure. A typical usage scenario is: - structure completion setup_done; + struct completion setup_done; init_completion(&setup_done); - initialze_work(...,&setup_done,...) + initialize_work(...,&setup_done,...) /* run non-dependent code */ /* do setup */ - wait_for_completion(&seupt_done); complete(setup_done) + wait_for_completion(&setup_done); complete(setup_done) -This is not implying any temporal order of wait_for_completion() and the +This is not implying any temporal order on wait_for_completion() and the call to complete() - if the call to complete() happened before the call to wait_for_completion() then the waiting side simply will continue -immediately as all dependencies are satisfied. +immediately as all dependencies are satisfied if not it will block until +completion is signaled by complete(). -Note that wait_for_completion() is calling spin_lock_irq/spin_unlock_irq +Note that wait_for_completion() is calling spin_lock_irq()/spin_unlock_irq(), so it can only be called safely when you know that interrupts are enabled. -Calling it from hard-irq context will result in hard to detect spurious -enabling of interrupts. +Calling it from hard-irq or irqs-off atomic contexts will result in +hard-to-detect spurious enabling of interrupts. wait_for_completion(): void wait_for_completion(struct completion *done): -The default behavior is to wait without a timeout and mark the task as +The default behavior is to wait without a timeout and to mark the task as uninterruptible. wait_for_completion() and its variants are only safe -in soft-interrupt or process context but not in hard-irq context. +in process context (as they can sleep) but not in atomic context, +interrupt context, with disabled irqs. or preemption is disabled - see also +try_wait_for_completion() below for handling completion in atomic/interrupt +context. + As all variants of wait_for_completion() can (obviously) block for a long -time, you probably don't want to call this with held locks - see also -try_wait_for_completion() below. +time, you probably don't want to call this with held mutexes. Variants available: @@ -141,43 +152,44 @@ A common problem that occurs is to have unclean assignment of return types, so care should be taken with assigning return-values to variables of proper type. Checking for the specific meaning of return values also has been found to be quite inaccurate e.g. constructs like -if(!wait_for_completion_interruptible_timeout(...)) would execute the same +if (!wait_for_completion_interruptible_timeout(...)) would execute the same code path for successful completion and for the interrupted case - which is probably not what you want. int wait_for_completion_interruptible(struct completion *done) -marking the task TASK_INTERRUPTIBLE. If a signal was received while waiting. -It will return -ERESTARTSYS and 0 otherwise. +This function marks the task TASK_INTERRUPTIBLE. If a signal was received +while waiting it will return -ERESTARTSYS; 0 otherwise. unsigned long wait_for_completion_timeout(struct completion *done, unsigned long timeout) -The task is marked as TASK_UNINTERRUPTIBLE and will wait at most timeout -(in jiffies). If timeout occurs it return 0 else the remaining time in -jiffies (but at least 1). Timeouts are preferably passed by msecs_to_jiffies() -or usecs_to_jiffies(). If the returned timeout value is deliberately ignored -a comment should probably explain why (e.g. see drivers/mfd/wm8350-core.c -wm8350_read_auxadc()) +The task is marked as TASK_UNINTERRUPTIBLE and will wait at most 'timeout' +(in jiffies). If timeout occurs it returns 0 else the remaining time in +jiffies (but at least 1). Timeouts are preferably calculated with +msecs_to_jiffies() or usecs_to_jiffies(). If the returned timeout value is +deliberately ignored a comment should probably explain why (e.g. see +drivers/mfd/wm8350-core.c wm8350_read_auxadc()) long wait_for_completion_interruptible_timeout( struct completion *done, unsigned long timeout) -passing a timeout in jiffies and marking the task as TASK_INTERRUPTIBLE. If a -signal was received it will return -ERESTARTSYS, 0 if completion timed-out and -the remaining time in jiffies if completion occurred. +This function passes a timeout in jiffies and marks the task as +TASK_INTERRUPTIBLE. If a signal was received it will return -ERESTARTSYS; +otherwise it returns 0 if the completion timed out or the remaining time in +jiffies if completion occurred. -Further variants include _killable which passes TASK_KILLABLE as the -designated tasks state and will return a -ERESTARTSYS if interrupted or -else 0 if completions was achieved as well as a _timeout variant. +Further variants include _killable which uses TASK_KILLABLE as the +designated tasks state and will return -ERESTARTSYS if it is interrupted or +else 0 if completion was achieved. There is a _timeout variant as well: long wait_for_completion_killable(struct completion *done) long wait_for_completion_killable_timeout(struct completion *done, unsigned long timeout) -The _io variants wait_for_completion_io behave the same as the non-_io +The _io variants wait_for_completion_io() behave the same as the non-_io variants, except for accounting waiting time as waiting on IO, which has -an impact on how scheduling is calculated. +an impact on how the task is accounted in scheduling stats. void wait_for_completion_io(struct completion *done) unsigned long wait_for_completion_io_timeout(struct completion *done @@ -187,13 +199,13 @@ an impact on how scheduling is calculated. Signaling completions: ---------------------- -A thread of execution that wants to signal that the conditions for -continuation have been achieved calls complete() to signal exactly one -of the waiters that it can continue. +A thread that wants to signal that the conditions for continuation have been +achieved calls complete() to signal exactly one of the waiters that it can +continue. void complete(struct completion *done) -or calls complete_all to signal all current and future waiters. +or calls complete_all() to signal all current and future waiters. void complete_all(struct completion *done) @@ -205,32 +217,32 @@ wakeup order is the same in which they were enqueued (FIFO order). If complete() is called multiple times then this will allow for that number of waiters to continue - each call to complete() will simply increment the done element. Calling complete_all() multiple times is a bug though. Both -complete() and complete_all() can be called in hard-irq context safely. +complete() and complete_all() can be called in hard-irq/atomic context safely. There only can be one thread calling complete() or complete_all() on a -particular struct completions at any time - serialized through the wait +particular struct completion at any time - serialized through the wait queue spinlock. Any such concurrent calls to complete() or complete_all() probably are a design bug. Signaling completion from hard-irq context is fine as it will appropriately -lock with spin_lock_irqsave/spin_unlock_irqrestore. +lock with spin_lock_irqsave/spin_unlock_irqrestore and it will never sleep. try_wait_for_completion()/completion_done(): -------------------------------------------- -The try_wait_for_completion will not put the thread on the wait queue but -rather returns false if it would need to enqueue (block) the thread, else it -consumes any posted completions and returns true. +The try_wait_for_completion() function will not put the thread on the wait +queue but rather returns false if it would need to enqueue (block) the thread, +else it consumes one posted completion and returns true. - bool try_wait_for_completion(struct completion *done) + bool try_wait_for_completion(struct completion *done) -Finally to check state of a completions without changing it in any way is -provided by completion_done() returning false if there are any posted -completion that was not yet consumed by waiters implying that there are -waiters and true otherwise; +Finally, to check the state of a completion without changing it in any way, +call completion_done(), which returns false if there are no posted +completions that were not yet consumed by waiters (implying that there are +waiters) and true otherwise; - bool completion_done(struct completion *done) + bool completion_done(struct completion *done) Both try_wait_for_completion() and completion_done() are safe to be called in -hard-irq context. +hard-irq or atomic context. diff --git a/Documentation/security/Smack.txt b/Documentation/security/Smack.txt index b6ef7e9dba30f52a0c0c222a08158fa543bef211..abc82f85215b976a09d8356b1481c6a4fd988116 100644 --- a/Documentation/security/Smack.txt +++ b/Documentation/security/Smack.txt @@ -33,11 +33,18 @@ The current git repository for Smack user space is: git://github.com/smack-team/smack.git This should make and install on most modern distributions. -There are three commands included in smackutil: +There are five commands included in smackutil: -smackload - properly formats data for writing to /smack/load -smackcipso - properly formats data for writing to /smack/cipso chsmack - display or set Smack extended attribute values +smackctl - load the Smack access rules +smackaccess - report if a process with one label has access + to an object with another + +These two commands are obsolete with the introduction of +the smackfs/load2 and smackfs/cipso2 interfaces. + +smackload - properly formats data for writing to smackfs/load +smackcipso - properly formats data for writing to smackfs/cipso In keeping with the intent of Smack, configuration data is minimal and not strictly required. The most important @@ -47,9 +54,9 @@ of this, but it can be manually as well. Add this line to /etc/fstab: - smackfs /smack smackfs smackfsdef=* 0 0 + smackfs /sys/fs/smackfs smackfs defaults 0 0 -and create the /smack directory for mounting. +The /sys/fs/smackfs directory is created by the kernel. Smack uses extended attributes (xattrs) to store labels on filesystem objects. The attributes are stored in the extended attribute security @@ -92,13 +99,13 @@ There are multiple ways to set a Smack label on a file: # attr -S -s SMACK64 -V "value" path # chsmack -a value path -A process can see the smack label it is running with by +A process can see the Smack label it is running with by reading /proc/self/attr/current. A process with CAP_MAC_ADMIN -can set the process smack by writing there. +can set the process Smack by writing there. Most Smack configuration is accomplished by writing to files -in the smackfs filesystem. This pseudo-filesystem is usually -mounted on /smack. +in the smackfs filesystem. This pseudo-filesystem is mounted +on /sys/fs/smackfs. access This interface reports whether a subject with the specified @@ -206,23 +213,30 @@ onlycap file or cleared by writing "-" to the file. ptrace This is used to define the current ptrace policy - 0 - default: this is the policy that relies on smack access rules. + 0 - default: this is the policy that relies on Smack access rules. For the PTRACE_READ a subject needs to have a read access on object. For the PTRACE_ATTACH a read-write access is required. 1 - exact: this is the policy that limits PTRACE_ATTACH. Attach is only allowed when subject's and object's labels are equal. - PTRACE_READ is not affected. Can be overriden with CAP_SYS_PTRACE. + PTRACE_READ is not affected. Can be overridden with CAP_SYS_PTRACE. 2 - draconian: this policy behaves like the 'exact' above with an - exception that it can't be overriden with CAP_SYS_PTRACE. + exception that it can't be overridden with CAP_SYS_PTRACE. revoke-subject Writing a Smack label here sets the access to '-' for all access rules with that subject label. +unconfined + If the kernel is configured with CONFIG_SECURITY_SMACK_BRINGUP + a process with CAP_MAC_ADMIN can write a label into this interface. + Thereafter, accesses that involve that label will be logged and + the access permitted if it wouldn't be otherwise. Note that this + is dangerous and can ruin the proper labeling of your system. + It should never be used in production. You can add access rules in /etc/smack/accesses. They take the form: subjectlabel objectlabel access -access is a combination of the letters rwxa which specify the +access is a combination of the letters rwxatb which specify the kind of access permitted a subject with subjectlabel on an object with objectlabel. If there is no rule no access is allowed. @@ -318,8 +332,9 @@ each of the subject and the object. Labels -Smack labels are ASCII character strings, one to twenty-three characters in -length. Single character labels using special characters, that being anything +Smack labels are ASCII character strings. They can be up to 255 characters +long, but keeping them to twenty-three characters is recommended. +Single character labels using special characters, that being anything other than a letter or digit, are reserved for use by the Smack development team. Smack labels are unstructured, case sensitive, and the only operation ever performed on them is comparison for equality. Smack labels cannot @@ -335,10 +350,9 @@ There are some predefined labels: ? Pronounced "huh", a single question mark character. @ Pronounced "web", a single at sign character. -Every task on a Smack system is assigned a label. System tasks, such as -init(8) and systems daemons, are run with the floor ("_") label. User tasks -are assigned labels according to the specification found in the -/etc/smack/user configuration file. +Every task on a Smack system is assigned a label. The Smack label +of a process will usually be assigned by the system initialization +mechanism. Access Rules @@ -393,6 +407,7 @@ describe access modes: w: indicates that write access should be granted. x: indicates that execute access should be granted. t: indicates that the rule requests transmutation. + b: indicates that the rule should be reported for bring-up. Uppercase values for the specification letters are allowed as well. Access mode specifications can be in any order. Examples of acceptable rules @@ -402,6 +417,7 @@ are: Secret Unclass R Manager Game x User HR w + Snap Crackle rwxatb New Old rRrRr Closed Off - @@ -413,7 +429,7 @@ Examples of unacceptable rules are: Spaces are not allowed in labels. Since a subject always has access to files with the same label specifying a rule for that case is pointless. Only -valid letters (rwxatRWXAT) and the dash ('-') character are allowed in +valid letters (rwxatbRWXATB) and the dash ('-') character are allowed in access specifications. The dash is a placeholder, so "a-r" is the same as "ar". A lone dash is used to specify that no access should be allowed. @@ -462,16 +478,11 @@ receiver. The receiver is not required to have read access to the sender. Setting Access Rules The configuration file /etc/smack/accesses contains the rules to be set at -system startup. The contents are written to the special file /smack/load. -Rules can be written to /smack/load at any time and take effect immediately. -For any pair of subject and object labels there can be only one rule, with the -most recently specified overriding any earlier specification. - -The program smackload is provided to ensure data is formatted -properly when written to /smack/load. This program reads lines -of the form - - subjectlabel objectlabel mode. +system startup. The contents are written to the special file +/sys/fs/smackfs/load2. Rules can be added at any time and take effect +immediately. For any pair of subject and object labels there can be only +one rule, with the most recently specified overriding any earlier +specification. Task Attribute @@ -488,7 +499,10 @@ only be changed by a process with privilege. Privilege -A process with CAP_MAC_OVERRIDE is privileged. +A process with CAP_MAC_OVERRIDE or CAP_MAC_ADMIN is privileged. +CAP_MAC_OVERRIDE allows the process access to objects it would +be denied otherwise. CAP_MAC_ADMIN allows a process to change +Smack data, including rules and attributes. Smack Networking @@ -510,14 +524,14 @@ intervention. Unlabeled packets that come into the system will be given the ambient label. Smack requires configuration in the case where packets from a system that is -not smack that speaks CIPSO may be encountered. Usually this will be a Trusted +not Smack that speaks CIPSO may be encountered. Usually this will be a Trusted Solaris system, but there are other, less widely deployed systems out there. CIPSO provides 3 important values, a Domain Of Interpretation (DOI), a level, and a category set with each packet. The DOI is intended to identify a group of systems that use compatible labeling schemes, and the DOI specified on the -smack system must match that of the remote system or packets will be -discarded. The DOI is 3 by default. The value can be read from /smack/doi and -can be changed by writing to /smack/doi. +Smack system must match that of the remote system or packets will be +discarded. The DOI is 3 by default. The value can be read from +/sys/fs/smackfs/doi and can be changed by writing to /sys/fs/smackfs/doi. The label and category set are mapped to a Smack label as defined in /etc/smack/cipso. @@ -539,15 +553,13 @@ The ":" and "," characters are permitted in a Smack label but have no special meaning. The mapping of Smack labels to CIPSO values is defined by writing to -/smack/cipso. Again, the format of data written to this special file -is highly restrictive, so the program smackcipso is provided to -ensure the writes are done properly. This program takes mappings -on the standard input and sends them to /smack/cipso properly. +/sys/fs/smackfs/cipso2. In addition to explicit mappings Smack supports direct CIPSO mappings. One CIPSO level is used to indicate that the category set passed in the packet is in fact an encoding of the Smack label. The level used is 250 by default. The -value can be read from /smack/direct and changed by writing to /smack/direct. +value can be read from /sys/fs/smackfs/direct and changed by writing to +/sys/fs/smackfs/direct. Socket Attributes @@ -565,8 +577,8 @@ sockets. Smack Netlabel Exceptions You will often find that your labeled application has to talk to the outside, -unlabeled world. To do this there's a special file /smack/netlabel where you can -add some exceptions in the form of : +unlabeled world. To do this there's a special file /sys/fs/smackfs/netlabel +where you can add some exceptions in the form of : @IP1 LABEL1 or @IP2/MASK LABEL2 @@ -574,22 +586,22 @@ It means that your application will have unlabeled access to @IP1 if it has write access on LABEL1, and access to the subnet @IP2/MASK if it has write access on LABEL2. -Entries in the /smack/netlabel file are matched by longest mask first, like in -classless IPv4 routing. +Entries in the /sys/fs/smackfs/netlabel file are matched by longest mask +first, like in classless IPv4 routing. A special label '@' and an option '-CIPSO' can be used there : @ means Internet, any application with any label has access to it -CIPSO means standard CIPSO networking If you don't know what CIPSO is and don't plan to use it, you can just do : -echo 127.0.0.1 -CIPSO > /smack/netlabel -echo 0.0.0.0/0 @ > /smack/netlabel +echo 127.0.0.1 -CIPSO > /sys/fs/smackfs/netlabel +echo 0.0.0.0/0 @ > /sys/fs/smackfs/netlabel If you use CIPSO on your 192.168.0.0/16 local network and need also unlabeled Internet access, you can have : -echo 127.0.0.1 -CIPSO > /smack/netlabel -echo 192.168.0.0/16 -CIPSO > /smack/netlabel -echo 0.0.0.0/0 @ > /smack/netlabel +echo 127.0.0.1 -CIPSO > /sys/fs/smackfs/netlabel +echo 192.168.0.0/16 -CIPSO > /sys/fs/smackfs/netlabel +echo 0.0.0.0/0 @ > /sys/fs/smackfs/netlabel Writing Applications for Smack @@ -676,7 +688,7 @@ Smack auditing If you want Smack auditing of security events, you need to set CONFIG_AUDIT in your kernel configuration. By default, all denied events will be audited. You can change this behavior by -writing a single character to the /smack/logging file : +writing a single character to the /sys/fs/smackfs/logging file : 0 : no logging 1 : log denied (default) 2 : log accepted @@ -686,3 +698,20 @@ Events are logged as 'key=value' pairs, for each event you at least will get the subject, the object, the rights requested, the action, the kernel function that triggered the event, plus other pairs depending on the type of event audited. + +Bringup Mode + +Bringup mode provides logging features that can make application +configuration and system bringup easier. Configure the kernel with +CONFIG_SECURITY_SMACK_BRINGUP to enable these features. When bringup +mode is enabled accesses that succeed due to rules marked with the "b" +access mode will logged. When a new label is introduced for processes +rules can be added aggressively, marked with the "b". The logging allows +tracking of which rules actual get used for that label. + +Another feature of bringup mode is the "unconfined" option. Writing +a label to /sys/fs/smackfs/unconfined makes subjects with that label +able to access any object, and objects with that label accessible to +all subjects. Any access that is granted because a label is unconfined +is logged. This feature is dangerous, as files and directories may +be created in places they couldn't if the policy were being enforced. diff --git a/Documentation/serial/tty.txt b/Documentation/serial/tty.txt index 1e52d67d0abf5c8ccb86b6aa5d1170f509d73132..dbe6623fed1c286bd49277486492b2960428eff6 100644 --- a/Documentation/serial/tty.txt +++ b/Documentation/serial/tty.txt @@ -198,6 +198,9 @@ TTY_IO_ERROR If set, causes all subsequent userspace read/write TTY_OTHER_CLOSED Device is a pty and the other side has closed. +TTY_OTHER_DONE Device is a pty and the other side has closed and + all pending input processing has been completed. + TTY_NO_WRITE_SPLIT Prevent driver from splitting up writes into smaller chunks. diff --git a/Documentation/sound/alsa/ControlNames.txt b/Documentation/sound/alsa/ControlNames.txt index 79a6127863ca8216294f9861d068e31b5a09bd16..3fc1cf50d28e18c0d1706e8b99304bbfb780dcd1 100644 --- a/Documentation/sound/alsa/ControlNames.txt +++ b/Documentation/sound/alsa/ControlNames.txt @@ -71,11 +71,11 @@ SOURCE: HDMI/DP (either HDMI or DisplayPort) Exceptions (deprecated): - [Digital] Capture Source - [Digital] Capture Switch (aka input gain switch) - [Digital] Capture Volume (aka input gain volume) - [Digital] Playback Switch (aka output gain switch) - [Digital] Playback Volume (aka output gain volume) + [Analogue|Digital] Capture Source + [Analogue|Digital] Capture Switch (aka input gain switch) + [Analogue|Digital] Capture Volume (aka input gain volume) + [Analogue|Digital] Playback Switch (aka output gain switch) + [Analogue|Digital] Playback Volume (aka output gain volume) Tone Control - Switch Tone Control - Bass Tone Control - Treble diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index 42a0a39b77e6a5da339e0f71717a6d3809986c24..e7193aac669c3a7afc356276c167de3f887fc027 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -466,7 +466,11 @@ The generic parser supports the following hints: - add_jack_modes (bool): add "xxx Jack Mode" enum controls to each I/O jack for allowing to change the headphone amp and mic bias VREF capabilities -- power_down_unused (bool): power down the unused widgets +- power_save_node (bool): advanced power management for each widget, + controlling the power sate (D0/D3) of each widget node depending on + the actual pin and stream states +- power_down_unused (bool): power down the unused widgets, a subset of + power_save_node, and will be dropped in future - add_hp_mic (bool): add the headphone to capture source if possible - hp_mic_detect (bool): enable/disable the hp/mic shared input for a single built-in mic case; default true diff --git a/Documentation/sound/alsa/timestamping.txt b/Documentation/sound/alsa/timestamping.txt new file mode 100644 index 0000000000000000000000000000000000000000..0b191a23f534d1bc5a0d54d6f7dfa6ae0ee090fd --- /dev/null +++ b/Documentation/sound/alsa/timestamping.txt @@ -0,0 +1,200 @@ +The ALSA API can provide two different system timestamps: + +- Trigger_tstamp is the system time snapshot taken when the .trigger +callback is invoked. This snapshot is taken by the ALSA core in the +general case, but specific hardware may have synchronization +capabilities or conversely may only be able to provide a correct +estimate with a delay. In the latter two cases, the low-level driver +is responsible for updating the trigger_tstamp at the most appropriate +and precise moment. Applications should not rely solely on the first +trigger_tstamp but update their internal calculations if the driver +provides a refined estimate with a delay. + +- tstamp is the current system timestamp updated during the last +event or application query. +The difference (tstamp - trigger_tstamp) defines the elapsed time. + +The ALSA API provides reports two basic pieces of information, avail +and delay, which combined with the trigger and current system +timestamps allow for applications to keep track of the 'fullness' of +the ring buffer and the amount of queued samples. + +The use of these different pointers and time information depends on +the application needs: + +- 'avail' reports how much can be written in the ring buffer +- 'delay' reports the time it will take to hear a new sample after all +queued samples have been played out. + +When timestamps are enabled, the avail/delay information is reported +along with a snapshot of system time. Applications can select from +CLOCK_REALTIME (NTP corrections including going backwards), +CLOCK_MONOTONIC (NTP corrections but never going backwards), +CLOCK_MONOTIC_RAW (without NTP corrections) and change the mode +dynamically with sw_params + + +The ALSA API also provide an audio_tstamp which reflects the passage +of time as measured by different components of audio hardware. In +ascii-art, this could be represented as follows (for the playback +case): + + +--------------------------------------------------------------> time + ^ ^ ^ ^ ^ + | | | | | + analog link dma app FullBuffer + time time time time time + | | | | | + |< codec delay >|<--hw delay-->||<---avail->| + |<----------------- delay---------------------->| | + |<----ring buffer length---->| + +The analog time is taken at the last stage of the playback, as close +as possible to the actual transducer + +The link time is taken at the output of the SOC/chipset as the samples +are pushed on a link. The link time can be directly measured if +supported in hardware by sample counters or wallclocks (e.g. with +HDAudio 24MHz or PTP clock for networked solutions) or indirectly +estimated (e.g. with the frame counter in USB). + +The DMA time is measured using counters - typically the least reliable +of all measurements due to the bursty natured of DMA transfers. + +The app time corresponds to the time tracked by an application after +writing in the ring buffer. + +The application can query what the hardware supports, define which +audio time it wants reported by selecting the relevant settings in +audio_tstamp_config fields, get an estimate of the timestamp +accuracy. It can also request the delay-to-analog be included in the +measurement. Direct access to the link time is very interesting on +platforms that provide an embedded DSP; measuring directly the link +time with dedicated hardware, possibly synchronized with system time, +removes the need to keep track of internal DSP processing times and +latency. + +In case the application requests an audio tstamp that is not supported +in hardware/low-level driver, the type is overridden as DEFAULT and the +timestamp will report the DMA time based on the hw_pointer value. + +For backwards compatibility with previous implementations that did not +provide timestamp selection, with a zero-valued COMPAT timestamp type +the results will default to the HDAudio wall clock for playback +streams and to the DMA time (hw_ptr) in all other cases. + +The audio timestamp accuracy can be returned to user-space, so that +appropriate decisions are made: + +- for dma time (default), the granularity of the transfers can be + inferred from the steps between updates and in turn provide + information on how much the application pointer can be rewound + safely. + +- the link time can be used to track long-term drifts between audio + and system time using the (tstamp-trigger_tstamp)/audio_tstamp + ratio, the precision helps define how much smoothing/low-pass + filtering is required. The link time can be either reset on startup + or reported as is (the latter being useful to compare progress of + different streams - but may require the wallclock to be always + running and not wrap-around during idle periods). If supported in + hardware, the absolute link time could also be used to define a + precise start time (patches WIP) + +- including the delay in the audio timestamp may + counter-intuitively not increase the precision of timestamps, e.g. if a + codec includes variable-latency DSP processing or a chain of + hardware components the delay is typically not known with precision. + +The accuracy is reported in nanosecond units (using an unsigned 32-bit +word), which gives a max precision of 4.29s, more than enough for +audio applications... + +Due to the varied nature of timestamping needs, even for a single +application, the audio_tstamp_config can be changed dynamically. In +the STATUS ioctl, the parameters are read-only and do not allow for +any application selection. To work around this limitation without +impacting legacy applications, a new STATUS_EXT ioctl is introduced +with read/write parameters. ALSA-lib will be modified to make use of +STATUS_EXT and effectively deprecate STATUS. + +The ALSA API only allows for a single audio timestamp to be reported +at a time. This is a conscious design decision, reading the audio +timestamps from hardware registers or from IPC takes time, the more +timestamps are read the more imprecise the combined measurements +are. To avoid any interpretation issues, a single (system, audio) +timestamp is reported. Applications that need different timestamps +will be required to issue multiple queries and perform an +interpolation of the results + +In some hardware-specific configuration, the system timestamp is +latched by a low-level audio subsytem, and the information provided +back to the driver. Due to potential delays in the communication with +the hardware, there is a risk of misalignment with the avail and delay +information. To make sure applications are not confused, a +driver_timestamp field is added in the snd_pcm_status structure; this +timestamp shows when the information is put together by the driver +before returning from the STATUS and STATUS_EXT ioctl. in most cases +this driver_timestamp will be identical to the regular system tstamp. + +Examples of typestamping with HDaudio: + +1. DMA timestamp, no compensation for DMA+analog delay +$ ./audio_time -p --ts_type=1 +playback: systime: 341121338 nsec, audio time 342000000 nsec, systime delta -878662 +playback: systime: 426236663 nsec, audio time 427187500 nsec, systime delta -950837 +playback: systime: 597080580 nsec, audio time 598000000 nsec, systime delta -919420 +playback: systime: 682059782 nsec, audio time 683020833 nsec, systime delta -961051 +playback: systime: 852896415 nsec, audio time 853854166 nsec, systime delta -957751 +playback: systime: 937903344 nsec, audio time 938854166 nsec, systime delta -950822 + +2. DMA timestamp, compensation for DMA+analog delay +$ ./audio_time -p --ts_type=1 -d +playback: systime: 341053347 nsec, audio time 341062500 nsec, systime delta -9153 +playback: systime: 426072447 nsec, audio time 426062500 nsec, systime delta 9947 +playback: systime: 596899518 nsec, audio time 596895833 nsec, systime delta 3685 +playback: systime: 681915317 nsec, audio time 681916666 nsec, systime delta -1349 +playback: systime: 852741306 nsec, audio time 852750000 nsec, systime delta -8694 + +3. link timestamp, compensation for DMA+analog delay +$ ./audio_time -p --ts_type=2 -d +playback: systime: 341060004 nsec, audio time 341062791 nsec, systime delta -2787 +playback: systime: 426242074 nsec, audio time 426244875 nsec, systime delta -2801 +playback: systime: 597080992 nsec, audio time 597084583 nsec, systime delta -3591 +playback: systime: 682084512 nsec, audio time 682088291 nsec, systime delta -3779 +playback: systime: 852936229 nsec, audio time 852940916 nsec, systime delta -4687 +playback: systime: 938107562 nsec, audio time 938112708 nsec, systime delta -5146 + +Example 1 shows that the timestamp at the DMA level is close to 1ms +ahead of the actual playback time (as a side time this sort of +measurement can help define rewind safeguards). Compensating for the +DMA-link delay in example 2 helps remove the hardware buffering abut +the information is still very jittery, with up to one sample of +error. In example 3 where the timestamps are measured with the link +wallclock, the timestamps show a monotonic behavior and a lower +dispersion. + +Example 3 and 4 are with USB audio class. Example 3 shows a high +offset between audio time and system time due to buffering. Example 4 +shows how compensating for the delay exposes a 1ms accuracy (due to +the use of the frame counter by the driver) + +Example 3: DMA timestamp, no compensation for delay, delta of ~5ms +$ ./audio_time -p -Dhw:1 -t1 +playback: systime: 120174019 nsec, audio time 125000000 nsec, systime delta -4825981 +playback: systime: 245041136 nsec, audio time 250000000 nsec, systime delta -4958864 +playback: systime: 370106088 nsec, audio time 375000000 nsec, systime delta -4893912 +playback: systime: 495040065 nsec, audio time 500000000 nsec, systime delta -4959935 +playback: systime: 620038179 nsec, audio time 625000000 nsec, systime delta -4961821 +playback: systime: 745087741 nsec, audio time 750000000 nsec, systime delta -4912259 +playback: systime: 870037336 nsec, audio time 875000000 nsec, systime delta -4962664 + +Example 4: DMA timestamp, compensation for delay, delay of ~1ms +$ ./audio_time -p -Dhw:1 -t1 -d +playback: systime: 120190520 nsec, audio time 120000000 nsec, systime delta 190520 +playback: systime: 245036740 nsec, audio time 244000000 nsec, systime delta 1036740 +playback: systime: 370034081 nsec, audio time 369000000 nsec, systime delta 1034081 +playback: systime: 495159907 nsec, audio time 494000000 nsec, systime delta 1159907 +playback: systime: 620098824 nsec, audio time 619000000 nsec, systime delta 1098824 +playback: systime: 745031847 nsec, audio time 744000000 nsec, systime delta 1031847 diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c index 94f574b0fdb25890c3e3f64a23622ee0e8fb3bea..135b3f592b83db0d00a940b435b8086b409fa3ef 100644 --- a/Documentation/spi/spidev_test.c +++ b/Documentation/spi/spidev_test.c @@ -80,7 +80,7 @@ static void hex_dump(const void *src, size_t length, size_t line_size, char *pre * Unescape - process hexadecimal escape character * converts shell input "\x23" -> 0x23 */ -int unespcape(char *_dst, char *_src, size_t len) +static int unescape(char *_dst, char *_src, size_t len) { int ret = 0; char *src = _src; @@ -304,7 +304,7 @@ int main(int argc, char *argv[]) size = strlen(input_tx+1); tx = malloc(size); rx = malloc(size); - size = unespcape((char *)tx, input_tx, size); + size = unescape((char *)tx, input_tx, size); transfer(fd, tx, rx, size); free(rx); free(tx); diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index 83ab25660fc961de2d498b3a56724ecc09f950b2..c831001c45f1162334b7a30544853a8baa47c6a5 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -77,12 +77,14 @@ show up in /proc/sys/kernel: - shmmax [ sysv ipc ] - shmmni - softlockup_all_cpu_backtrace +- soft_watchdog - stop-a [ SPARC only ] - sysrq ==> Documentation/sysrq.txt - sysctl_writes_strict - tainted - threads-max - unknown_nmi_panic +- watchdog - watchdog_thresh - version @@ -417,16 +419,23 @@ successful IPC object allocation. nmi_watchdog: -Enables/Disables the NMI watchdog on x86 systems. When the value is -non-zero the NMI watchdog is enabled and will continuously test all -online cpus to determine whether or not they are still functioning -properly. Currently, passing "nmi_watchdog=" parameter at boot time is -required for this function to work. +This parameter can be used to control the NMI watchdog +(i.e. the hard lockup detector) on x86 systems. -If LAPIC NMI watchdog method is in use (nmi_watchdog=2 kernel -parameter), the NMI watchdog shares registers with oprofile. By -disabling the NMI watchdog, oprofile may have more registers to -utilize. + 0 - disable the hard lockup detector + 1 - enable the hard lockup detector + +The hard lockup detector monitors each CPU for its ability to respond to +timer interrupts. The mechanism utilizes CPU performance counter registers +that are programmed to generate Non-Maskable Interrupts (NMIs) periodically +while a CPU is busy. Hence, the alternative name 'NMI watchdog'. + +The NMI watchdog is disabled by default if the kernel is running as a guest +in a KVM virtual machine. This default can be overridden by adding + + nmi_watchdog=1 + +to the guest kernel command line (see Documentation/kernel-parameters.txt). ============================================================== @@ -816,6 +825,22 @@ NMI. ============================================================== +soft_watchdog + +This parameter can be used to control the soft lockup detector. + + 0 - disable the soft lockup detector + 1 - enable the soft lockup detector + +The soft lockup detector monitors CPUs for threads that are hogging the CPUs +without rescheduling voluntarily, and thus prevent the 'watchdog/N' threads +from running. The mechanism depends on the CPUs ability to respond to timer +interrupts which are needed for the 'watchdog/N' threads to be woken up by +the watchdog timer function, otherwise the NMI watchdog - if enabled - can +detect a hard lockup condition. + +============================================================== + tainted: Non-zero if the kernel has been tainted. Numeric values, which @@ -847,6 +872,27 @@ can be ORed together: ============================================================== +threads-max + +This value controls the maximum number of threads that can be created +using fork(). + +During initialization the kernel sets this value such that even if the +maximum number of threads is created, the thread structures occupy only +a part (1/8th) of the available RAM pages. + +The minimum value that can be written to threads-max is 20. +The maximum value that can be written to threads-max is given by the +constant FUTEX_TID_MASK (0x3fffffff). +If a value outside of this range is written to threads-max an error +EINVAL occurs. + +The value written is checked against the available RAM pages. If the +thread structures would occupy too much (more than 1/8th) of the +available RAM pages threads-max is reduced accordingly. + +============================================================== + unknown_nmi_panic: The value in this file affects behavior of handling NMI. When the @@ -858,6 +904,25 @@ example. If a system hangs up, try pressing the NMI switch. ============================================================== +watchdog: + +This parameter can be used to disable or enable the soft lockup detector +_and_ the NMI watchdog (i.e. the hard lockup detector) at the same time. + + 0 - disable both lockup detectors + 1 - enable both lockup detectors + +The soft lockup detector and the NMI watchdog can also be disabled or +enabled individually, using the soft_watchdog and nmi_watchdog parameters. +If the watchdog parameter is read, for example by executing + + cat /proc/sys/kernel/watchdog + +the output of this command (0 or 1) shows the logical OR of soft_watchdog +and nmi_watchdog. + +============================================================== + watchdog_thresh: This value can be used to control the frequency of hrtimer and NMI diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index 902b4574acfbbae33be058eeae51551600d2fd21..9832ec52f859a2f4e3c99b0767ef957a59a97bf1 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -21,6 +21,7 @@ Currently, these files are in /proc/sys/vm: - admin_reserve_kbytes - block_dump - compact_memory +- compact_unevictable_allowed - dirty_background_bytes - dirty_background_ratio - dirty_bytes @@ -106,6 +107,16 @@ huge pages although processes will also directly compact memory as required. ============================================================== +compact_unevictable_allowed + +Available only when CONFIG_COMPACTION is set. When set to 1, compaction is +allowed to examine the unevictable lru (mlocked pages) for pages to compact. +This should be used on systems where stalls for minor page faults are an +acceptable trade for large contiguous free memory. Set to 0 to prevent +compaction from moving pages that are unevictable. Default value is 1. + +============================================================== + dirty_background_bytes Contains the amount of dirty memory at which the background kernel diff --git a/Documentation/target/tcm_mod_builder.py b/Documentation/target/tcm_mod_builder.py index 2b47704f75cb3bfedf836cf02c75afd82c91e405..2ba71cea01723cf3216ef4e95708789b6e0cc9f2 100755 --- a/Documentation/target/tcm_mod_builder.py +++ b/Documentation/target/tcm_mod_builder.py @@ -237,8 +237,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += "#include \"" + fabric_mod_name + "_base.h\"\n" buf += "#include \"" + fabric_mod_name + "_fabric.h\"\n\n" - buf += "/* Local pointer to allocated TCM configfs fabric module */\n" - buf += "struct target_fabric_configfs *" + fabric_mod_name + "_fabric_configfs;\n\n" + buf += "static const struct target_core_fabric_ops " + fabric_mod_name + "_ops;\n\n" buf += "static struct se_node_acl *" + fabric_mod_name + "_make_nodeacl(\n" buf += " struct se_portal_group *se_tpg,\n" @@ -309,8 +308,8 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " }\n" buf += " tpg->" + fabric_mod_port + " = " + fabric_mod_port + ";\n" buf += " tpg->" + fabric_mod_port + "_tpgt = tpgt;\n\n" - buf += " ret = core_tpg_register(&" + fabric_mod_name + "_fabric_configfs->tf_ops, wwn,\n" - buf += " &tpg->se_tpg, (void *)tpg,\n" + buf += " ret = core_tpg_register(&" + fabric_mod_name + "_ops, wwn,\n" + buf += " &tpg->se_tpg, tpg,\n" buf += " TRANSPORT_TPG_TYPE_NORMAL);\n" buf += " if (ret < 0) {\n" buf += " kfree(tpg);\n" @@ -370,7 +369,10 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " NULL,\n" buf += "};\n\n" - buf += "static struct target_core_fabric_ops " + fabric_mod_name + "_ops = {\n" + buf += "static const struct target_core_fabric_ops " + fabric_mod_name + "_ops = {\n" + buf += " .module = THIS_MODULE,\n" + buf += " .name = " + fabric_mod_name + ",\n" + buf += " .get_fabric_proto_ident = " + fabric_mod_name + "_get_fabric_proto_ident,\n" buf += " .get_fabric_name = " + fabric_mod_name + "_get_fabric_name,\n" buf += " .get_fabric_proto_ident = " + fabric_mod_name + "_get_fabric_proto_ident,\n" buf += " .tpg_get_wwn = " + fabric_mod_name + "_get_fabric_wwn,\n" @@ -413,75 +415,18 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " .fabric_drop_np = NULL,\n" buf += " .fabric_make_nodeacl = " + fabric_mod_name + "_make_nodeacl,\n" buf += " .fabric_drop_nodeacl = " + fabric_mod_name + "_drop_nodeacl,\n" - buf += "};\n\n" - - buf += "static int " + fabric_mod_name + "_register_configfs(void)\n" - buf += "{\n" - buf += " struct target_fabric_configfs *fabric;\n" - buf += " int ret;\n\n" - buf += " printk(KERN_INFO \"" + fabric_mod_name.upper() + " fabric module %s on %s/%s\"\n" - buf += " \" on \"UTS_RELEASE\"\\n\"," + fabric_mod_name.upper() + "_VERSION, utsname()->sysname,\n" - buf += " utsname()->machine);\n" - buf += " /*\n" - buf += " * Register the top level struct config_item_type with TCM core\n" - buf += " */\n" - buf += " fabric = target_fabric_configfs_init(THIS_MODULE, \"" + fabric_mod_name + "\");\n" - buf += " if (IS_ERR(fabric)) {\n" - buf += " printk(KERN_ERR \"target_fabric_configfs_init() failed\\n\");\n" - buf += " return PTR_ERR(fabric);\n" - buf += " }\n" - buf += " /*\n" - buf += " * Setup fabric->tf_ops from our local " + fabric_mod_name + "_ops\n" - buf += " */\n" - buf += " fabric->tf_ops = " + fabric_mod_name + "_ops;\n" - buf += " /*\n" - buf += " * Setup default attribute lists for various fabric->tf_cit_tmpl\n" - buf += " */\n" - buf += " fabric->tf_cit_tmpl.tfc_wwn_cit.ct_attrs = " + fabric_mod_name + "_wwn_attrs;\n" - buf += " fabric->tf_cit_tmpl.tfc_tpg_base_cit.ct_attrs = NULL;\n" - buf += " fabric->tf_cit_tmpl.tfc_tpg_attrib_cit.ct_attrs = NULL;\n" - buf += " fabric->tf_cit_tmpl.tfc_tpg_param_cit.ct_attrs = NULL;\n" - buf += " fabric->tf_cit_tmpl.tfc_tpg_np_base_cit.ct_attrs = NULL;\n" - buf += " fabric->tf_cit_tmpl.tfc_tpg_nacl_base_cit.ct_attrs = NULL;\n" - buf += " fabric->tf_cit_tmpl.tfc_tpg_nacl_attrib_cit.ct_attrs = NULL;\n" - buf += " fabric->tf_cit_tmpl.tfc_tpg_nacl_auth_cit.ct_attrs = NULL;\n" - buf += " fabric->tf_cit_tmpl.tfc_tpg_nacl_param_cit.ct_attrs = NULL;\n" - buf += " /*\n" - buf += " * Register the fabric for use within TCM\n" - buf += " */\n" - buf += " ret = target_fabric_configfs_register(fabric);\n" - buf += " if (ret < 0) {\n" - buf += " printk(KERN_ERR \"target_fabric_configfs_register() failed\"\n" - buf += " \" for " + fabric_mod_name.upper() + "\\n\");\n" - buf += " return ret;\n" - buf += " }\n" - buf += " /*\n" - buf += " * Setup our local pointer to *fabric\n" - buf += " */\n" - buf += " " + fabric_mod_name + "_fabric_configfs = fabric;\n" - buf += " printk(KERN_INFO \"" + fabric_mod_name.upper() + "[0] - Set fabric -> " + fabric_mod_name + "_fabric_configfs\\n\");\n" - buf += " return 0;\n" - buf += "};\n\n" - buf += "static void __exit " + fabric_mod_name + "_deregister_configfs(void)\n" - buf += "{\n" - buf += " if (!" + fabric_mod_name + "_fabric_configfs)\n" - buf += " return;\n\n" - buf += " target_fabric_configfs_deregister(" + fabric_mod_name + "_fabric_configfs);\n" - buf += " " + fabric_mod_name + "_fabric_configfs = NULL;\n" - buf += " printk(KERN_INFO \"" + fabric_mod_name.upper() + "[0] - Cleared " + fabric_mod_name + "_fabric_configfs\\n\");\n" + buf += "\n" + buf += " .tfc_wwn_attrs = " + fabric_mod_name + "_wwn_attrs;\n" buf += "};\n\n" buf += "static int __init " + fabric_mod_name + "_init(void)\n" buf += "{\n" - buf += " int ret;\n\n" - buf += " ret = " + fabric_mod_name + "_register_configfs();\n" - buf += " if (ret < 0)\n" - buf += " return ret;\n\n" - buf += " return 0;\n" + buf += " return target_register_template(" + fabric_mod_name + "_ops);\n" buf += "};\n\n" + buf += "static void __exit " + fabric_mod_name + "_exit(void)\n" buf += "{\n" - buf += " " + fabric_mod_name + "_deregister_configfs();\n" + buf += " target_unregister_template(" + fabric_mod_name + "_ops);\n" buf += "};\n\n" buf += "MODULE_DESCRIPTION(\"" + fabric_mod_name.upper() + " series fabric driver\");\n" diff --git a/Documentation/target/tcmu-design.txt b/Documentation/target/tcmu-design.txt index 5518465290bf5d64b3ae9b94dd5440ed0a2b97c3..43e94ea6d2cad8d0e17715a7ecf4d1e31b9b9e0e 100644 --- a/Documentation/target/tcmu-design.txt +++ b/Documentation/target/tcmu-design.txt @@ -138,27 +138,40 @@ signals the kernel via a 4-byte write(). When cmd_head equals cmd_tail, the ring is empty -- no commands are currently waiting to be processed by userspace. -TCMU commands start with a common header containing "len_op", a 32-bit -value that stores the length, as well as the opcode in the lowest -unused bits. Currently only two opcodes are defined, TCMU_OP_PAD and -TCMU_OP_CMD. When userspace encounters a command with PAD opcode, it -should skip ahead by the bytes in "length". (The kernel inserts PAD -entries to ensure each CMD entry fits contigously into the circular -buffer.) - -When userspace handles a CMD, it finds the SCSI CDB (Command Data -Block) via tcmu_cmd_entry.req.cdb_off. This is an offset from the -start of the overall shared memory region, not the entry. The data -in/out buffers are accessible via tht req.iov[] array. Note that -each iov.iov_base is also an offset from the start of the region. - -TCMU currently does not support BIDI operations. +TCMU commands are 8-byte aligned. They start with a common header +containing "len_op", a 32-bit value that stores the length, as well as +the opcode in the lowest unused bits. It also contains cmd_id and +flags fields for setting by the kernel (kflags) and userspace +(uflags). + +Currently only two opcodes are defined, TCMU_OP_CMD and TCMU_OP_PAD. + +When the opcode is CMD, the entry in the command ring is a struct +tcmu_cmd_entry. Userspace finds the SCSI CDB (Command Data Block) via +tcmu_cmd_entry.req.cdb_off. This is an offset from the start of the +overall shared memory region, not the entry. The data in/out buffers +are accessible via tht req.iov[] array. iov_cnt contains the number of +entries in iov[] needed to describe either the Data-In or Data-Out +buffers. For bidirectional commands, iov_cnt specifies how many iovec +entries cover the Data-Out area, and iov_bidi_count specifies how many +iovec entries immediately after that in iov[] cover the Data-In +area. Just like other fields, iov.iov_base is an offset from the start +of the region. When completing a command, userspace sets rsp.scsi_status, and rsp.sense_buffer if necessary. Userspace then increments mailbox.cmd_tail by entry.hdr.length (mod cmdr_size) and signals the kernel via the UIO method, a 4-byte write to the file descriptor. +When the opcode is PAD, userspace only updates cmd_tail as above -- +it's a no-op. (The kernel inserts PAD entries to ensure each CMD entry +is contiguous within the command ring.) + +More opcodes may be added in the future. If userspace encounters an +opcode it does not handle, it must set UNKNOWN_OP bit (bit 0) in +hdr.uflags, update cmd_tail, and proceed with processing additional +commands, if any. + The Data Area: This is shared-memory space after the command ring. The organization diff --git a/Documentation/timers/NO_HZ.txt b/Documentation/timers/NO_HZ.txt index cca122f25120b310fc1816b342d61adb29f832c6..6eaf576294f3bbd0d4d7d992fc17522edc723d48 100644 --- a/Documentation/timers/NO_HZ.txt +++ b/Documentation/timers/NO_HZ.txt @@ -158,13 +158,9 @@ not come for free: to the need to inform kernel subsystems (such as RCU) about the change in mode. -3. POSIX CPU timers on adaptive-tick CPUs may miss their deadlines - (perhaps indefinitely) because they currently rely on - scheduling-tick interrupts. This will likely be fixed in - one of two ways: (1) Prevent CPUs with POSIX CPU timers from - entering adaptive-tick mode, or (2) Use hrtimers or other - adaptive-ticks-immune mechanism to cause the POSIX CPU timer to - fire properly. +3. POSIX CPU timers prevent CPUs from entering adaptive-tick mode. + Real-time applications needing to take actions based on CPU time + consumption need to use other means of doing so. 4. If there are more perf events pending than the hardware can accommodate, they are normally round-robined so as to collect diff --git a/Documentation/trace/coresight.txt b/Documentation/trace/coresight.txt index 02361552a3eac314a68338c5638f4239ed0d28d7..77d14d51a670a523a14ec9b4581f66d720ba3e76 100644 --- a/Documentation/trace/coresight.txt +++ b/Documentation/trace/coresight.txt @@ -14,7 +14,7 @@ document is concerned with the latter. HW assisted tracing is becoming increasingly useful when dealing with systems that have many SoCs and other components like GPU and DMA engines. ARM has developed a HW assisted tracing solution by means of different components, each -being added to a design at systhesis time to cater to specific tracing needs. +being added to a design at synthesis time to cater to specific tracing needs. Compoments are generally categorised as source, link and sinks and are (usually) discovered using the AMBA bus. diff --git a/Documentation/video4linux/v4l2-controls.txt b/Documentation/video4linux/v4l2-controls.txt index 0f84ce8c9a7b1389c4c9b34fd9b5f427bdb22c40..5517db602f37b0d3f9a0939832a2494103c422de 100644 --- a/Documentation/video4linux/v4l2-controls.txt +++ b/Documentation/video4linux/v4l2-controls.txt @@ -344,7 +344,9 @@ implement g_volatile_ctrl like this: } Note that you use the 'new value' union as well in g_volatile_ctrl. In general -controls that need to implement g_volatile_ctrl are read-only controls. +controls that need to implement g_volatile_ctrl are read-only controls. If they +are not, a V4L2_EVENT_CTRL_CH_VALUE will not be generated when the control +changes. To mark a control as volatile you have to set V4L2_CTRL_FLAG_VOLATILE: diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index f586e29ce22110cfbe8bfcee63a20cd7ab108547..59e619f9bbf54558f69a97405100d036b09d20d6 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -793,8 +793,8 @@ video_register_device_no_warn() instead. Whenever a device node is created some attributes are also created for you. If you look in /sys/class/video4linux you see the devices. Go into e.g. -video0 and you will see 'name', 'debug' and 'index' attributes. The 'name' -attribute is the 'name' field of the video_device struct. The 'debug' attribute +video0 and you will see 'name', 'dev_debug' and 'index' attributes. The 'name' +attribute is the 'name' field of the video_device struct. The 'dev_debug' attribute can be used to enable core debugging. See the next section for more detailed information on this. @@ -821,7 +821,7 @@ unregister the device if the registration failed. video device debugging ---------------------- -The 'debug' attribute that is created for each video, vbi, radio or swradio +The 'dev_debug' attribute that is created for each video, vbi, radio or swradio device in /sys/class/video4linux// allows you to enable logging of file operations. diff --git a/Documentation/video4linux/vivid.txt b/Documentation/video4linux/vivid.txt index 6cfc8541a362ccb4871259f01c91bdaadb3a8aba..cd4b5a1ac529695964940701b7627396394ac4de 100644 --- a/Documentation/video4linux/vivid.txt +++ b/Documentation/video4linux/vivid.txt @@ -912,6 +912,11 @@ looped to the video input provided that: sequence and field counting in struct v4l2_buffer on the capture side may not be 100% accurate. +- field settings V4L2_FIELD_SEQ_TB/BT are not supported. While it is possible to + implement this, it would mean a lot of work to get this right. Since these + field values are rarely used the decision was made not to implement this for + now. + - on the input side the "Standard Signal Mode" for the S-Video input or the "DV Timings Signal Mode" for the HDMI input should be configured so that a valid signal is passed to the video input. diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index bc9f6fe44e27614c2f26f155385fe0d5d13d2e3b..9fa2bf8c3f6f13282c92c33671b5ad9a3eaa1d0a 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -3573,3 +3573,20 @@ struct { @ar - access register number KVM handlers should exit to userspace with rc = -EREMOTE. + + +8. Other capabilities. +---------------------- + +This section lists capabilities that give information about other +features of the KVM implementation. + +8.1 KVM_CAP_PPC_HWRNG + +Architectures: ppc + +This capability, if KVM_CHECK_EXTENSION indicates that it is +available, means that that the kernel has an implementation of the +H_RANDOM hypercall backed by a hardware random-number generator. +If present, the kernel H_RANDOM handler can be enabled for guest use +with the KVM_CAP_PPC_ENABLE_HCALL capability. diff --git a/Documentation/vm/cleancache.txt b/Documentation/vm/cleancache.txt index 01d76282444ee46a9658c119f6a33d99864f0c15..e4b49df7a04844b75979421e445374aa8ca03e59 100644 --- a/Documentation/vm/cleancache.txt +++ b/Documentation/vm/cleancache.txt @@ -28,9 +28,7 @@ IMPLEMENTATION OVERVIEW A cleancache "backend" that provides transcendent memory registers itself to the kernel's cleancache "frontend" by calling cleancache_register_ops, passing a pointer to a cleancache_ops structure with funcs set appropriately. -Note that cleancache_register_ops returns the previous settings so that -chaining can be performed if desired. The functions provided must conform to -certain semantics as follows: +The functions provided must conform to certain semantics as follows: Most important, cleancache is "ephemeral". Pages which are copied into cleancache have an indefinite lifetime which is completely unknowable diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt index f2d3a100fe38a634383e0e0af1d6207dd13e936d..030977fb8d2dcb0cb820b5989b9c0cfedd3c2d83 100644 --- a/Documentation/vm/hugetlbpage.txt +++ b/Documentation/vm/hugetlbpage.txt @@ -267,21 +267,34 @@ call, then it is required that system administrator mount a file system of type hugetlbfs: mount -t hugetlbfs \ - -o uid=,gid=,mode=,size=,nr_inodes= \ - none /mnt/huge + -o uid=,gid=,mode=,pagesize=,size=,\ + min_size=,nr_inodes= none /mnt/huge This command mounts a (pseudo) filesystem of type hugetlbfs on the directory /mnt/huge. Any files created on /mnt/huge uses huge pages. The uid and gid options sets the owner and group of the root of the file system. By default the uid and gid of the current process are taken. The mode option sets the mode of root of file system to value & 01777. This value is given in octal. -By default the value 0755 is picked. The size option sets the maximum value of -memory (huge pages) allowed for that filesystem (/mnt/huge). The size is -rounded down to HPAGE_SIZE. The option nr_inodes sets the maximum number of -inodes that /mnt/huge can use. If the size or nr_inodes option is not -provided on command line then no limits are set. For size and nr_inodes -options, you can use [G|g]/[M|m]/[K|k] to represent giga/mega/kilo. For -example, size=2K has the same meaning as size=2048. +By default the value 0755 is picked. If the paltform supports multiple huge +page sizes, the pagesize option can be used to specify the huge page size and +associated pool. pagesize is specified in bytes. If pagesize is not specified +the paltform's default huge page size and associated pool will be used. The +size option sets the maximum value of memory (huge pages) allowed for that +filesystem (/mnt/huge). The size option can be specified in bytes, or as a +percentage of the specified huge page pool (nr_hugepages). The size is +rounded down to HPAGE_SIZE boundary. The min_size option sets the minimum +value of memory (huge pages) allowed for the filesystem. min_size can be +specified in the same way as size, either bytes or a percentage of the +huge page pool. At mount time, the number of huge pages specified by +min_size are reserved for use by the filesystem. If there are not enough +free huge pages available, the mount will fail. As huge pages are allocated +to the filesystem and freed, the reserve count is adjusted so that the sum +of allocated and reserved huge pages is always at least min_size. The option +nr_inodes sets the maximum number of inodes that /mnt/huge can use. If the +size, min_size or nr_inodes option is not provided on command line then +no limits are set. For pagesize, size, min_size and nr_inodes options, you +can use [G|g]/[M|m]/[K|k] to represent giga/mega/kilo. For example, size=2K +has the same meaning as size=2048. While read system calls are supported on files that reside on hugetlb file systems, write system calls are not. @@ -289,15 +302,23 @@ file systems, write system calls are not. Regular chown, chgrp, and chmod commands (with right permissions) could be used to change the file attributes on hugetlbfs. -Also, it is important to note that no such mount command is required if the +Also, it is important to note that no such mount command is required if applications are going to use only shmat/shmget system calls or mmap with -MAP_HUGETLB. Users who wish to use hugetlb page via shared memory segment -should be a member of a supplementary group and system admin needs to -configure that gid into /proc/sys/vm/hugetlb_shm_group. It is possible for -same or different applications to use any combination of mmaps and shm* -calls, though the mount of filesystem will be required for using mmap calls -without MAP_HUGETLB. For an example of how to use mmap with MAP_HUGETLB see -map_hugetlb.c. +MAP_HUGETLB. For an example of how to use mmap with MAP_HUGETLB see map_hugetlb +below. + +Users who wish to use hugetlb memory via shared memory segment should be a +member of a supplementary group and system admin needs to configure that gid +into /proc/sys/vm/hugetlb_shm_group. It is possible for same or different +applications to use any combination of mmaps and shm* calls, though the mount of +filesystem will be required for using mmap calls without MAP_HUGETLB. + +Syscalls that operate on memory backed by hugetlb pages only have their lengths +aligned to the native page size of the processor; they will normally fail with +errno set to EINVAL or exclude hugetlb pages that extend beyond the length if +not hugepage aligned. For example, munmap(2) will fail if memory is backed by +a hugetlb page and the length is smaller than the hugepage size. + Examples ======== diff --git a/Documentation/vm/pagemap.txt b/Documentation/vm/pagemap.txt index 6fbd55ef6b45379f4e92c7ee009657c3c73bcd7c..6bfbc172cdb96b437728a34eadf3e257ab456799 100644 --- a/Documentation/vm/pagemap.txt +++ b/Documentation/vm/pagemap.txt @@ -131,7 +131,8 @@ Short descriptions to the page flags: 13. SWAPCACHE page is mapped to swap space, ie. has an associated swap entry 14. SWAPBACKED page is backed by swap/RAM -The page-types tool in this directory can be used to query the above flags. +The page-types tool in the tools/vm directory can be used to query the +above flags. Using pagemap to do something useful: diff --git a/Documentation/vm/transhuge.txt b/Documentation/vm/transhuge.txt index 6b31cfbe2a9a1197b8d33d294e90bd6f64d3fcd9..8143b9e8373db41746330c468dede07acfd96b56 100644 --- a/Documentation/vm/transhuge.txt +++ b/Documentation/vm/transhuge.txt @@ -159,6 +159,17 @@ for each pass: /sys/kernel/mm/transparent_hugepage/khugepaged/full_scans +max_ptes_none specifies how many extra small pages (that are +not already mapped) can be allocated when collapsing a group +of small pages into one large page. + +/sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none + +A higher value leads to use additional memory for programs. +A lower value leads to gain less thp performance. Value of +max_ptes_none can waste cpu time very little, you can +ignore it. + == Boot parameter == You can change the sysfs boot time defaults of Transparent Hugepage diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt index 744f82f86c5818f6837e1a3c072fd2bffd09ab54..3be0bfc4738df5f7c00ed5aa6d722a8f23a0949f 100644 --- a/Documentation/vm/unevictable-lru.txt +++ b/Documentation/vm/unevictable-lru.txt @@ -22,6 +22,7 @@ CONTENTS - Filtering special vmas. - munlock()/munlockall() system call handling. - Migrating mlocked pages. + - Compacting mlocked pages. - mmap(MAP_LOCKED) system call handling. - munmap()/exit()/exec() system call handling. - try_to_unmap(). @@ -317,7 +318,7 @@ If the VMA passes some filtering as described in "Filtering Special Vmas" below, mlock_fixup() will attempt to merge the VMA with its neighbors or split off a subset of the VMA if the range does not cover the entire VMA. Once the VMA has been merged or split or neither, mlock_fixup() will call -__mlock_vma_pages_range() to fault in the pages via get_user_pages() and to +populate_vma_page_range() to fault in the pages via get_user_pages() and to mark the pages as mlocked via mlock_vma_page(). Note that the VMA being mlocked might be mapped with PROT_NONE. In this case, @@ -327,7 +328,7 @@ fault path or in vmscan. Also note that a page returned by get_user_pages() could be truncated or migrated out from under us, while we're trying to mlock it. To detect this, -__mlock_vma_pages_range() checks page_mapping() after acquiring the page lock. +populate_vma_page_range() checks page_mapping() after acquiring the page lock. If the page is still associated with its mapping, we'll go ahead and call mlock_vma_page(). If the mapping is gone, we just unlock the page and move on. In the worst case, this will result in a page mapped in a VM_LOCKED VMA @@ -392,7 +393,7 @@ ignored for munlock. If the VMA is VM_LOCKED, mlock_fixup() again attempts to merge or split off the specified range. The range is then munlocked via the function -__mlock_vma_pages_range() - the same function used to mlock a VMA range - +populate_vma_page_range() - the same function used to mlock a VMA range - passing a flag to indicate that munlock() is being performed. Because the VMA access protections could have been changed to PROT_NONE after @@ -402,7 +403,7 @@ get_user_pages() was enhanced to accept a flag to ignore the permissions when fetching the pages - all of which should be resident as a result of previous mlocking. -For munlock(), __mlock_vma_pages_range() unlocks individual pages by calling +For munlock(), populate_vma_page_range() unlocks individual pages by calling munlock_vma_page(). munlock_vma_page() unconditionally clears the PG_mlocked flag using TestClearPageMlocked(). As with mlock_vma_page(), munlock_vma_page() use the Test*PageMlocked() function to handle the case where @@ -450,6 +451,17 @@ list because of a race between munlock and migration, page migration uses the putback_lru_page() function to add migrated pages back to the LRU. +COMPACTING MLOCKED PAGES +------------------------ + +The unevictable LRU can be scanned for compactable regions and the default +behavior is to do so. /proc/sys/vm/compact_unevictable_allowed controls +this behavior (see Documentation/sysctl/vm.txt). Once scanning of the +unevictable LRU is enabled, the work of compaction is mostly handled by +the page migration code and the same work flow as described in MIGRATING +MLOCKED PAGES will apply. + + mmap(MAP_LOCKED) SYSTEM CALL HANDLING ------------------------------------- @@ -463,21 +475,11 @@ populate the page table. To mlock a range of memory under the unevictable/mlock infrastructure, the mmap() handler and task address space expansion functions call -mlock_vma_pages_range() specifying the vma and the address range to mlock. -mlock_vma_pages_range() filters VMAs like mlock_fixup(), as described above in -"Filtering Special VMAs". It will clear the VM_LOCKED flag, which will have -already been set by the caller, in filtered VMAs. Thus these VMA's need not be -visited for munlock when the region is unmapped. - -For "normal" VMAs, mlock_vma_pages_range() calls __mlock_vma_pages_range() to -fault/allocate the pages and mlock them. Again, like mlock_fixup(), -mlock_vma_pages_range() downgrades the mmap semaphore to read mode before -attempting to fault/allocate and mlock the pages and "upgrades" the semaphore -back to write mode before returning. - -The callers of mlock_vma_pages_range() will have already added the memory range +populate_vma_page_range() specifying the vma and the address range to mlock. + +The callers of populate_vma_page_range() will have already added the memory range to be mlocked to the task's "locked_vm". To account for filtered VMAs, -mlock_vma_pages_range() returns the number of pages NOT mlocked. All of the +populate_vma_page_range() returns the number of pages NOT mlocked. All of the callers then subtract a non-negative return value from the task's locked_vm. A negative return value represent an error - for example, from get_user_pages() attempting to fault in a VMA with PROT_NONE access. In this case, we leave the diff --git a/Documentation/vm/zsmalloc.txt b/Documentation/vm/zsmalloc.txt new file mode 100644 index 0000000000000000000000000000000000000000..64ed63c4f69d6a95e22a1ac766d6d4127a8a3788 --- /dev/null +++ b/Documentation/vm/zsmalloc.txt @@ -0,0 +1,70 @@ +zsmalloc +-------- + +This allocator is designed for use with zram. Thus, the allocator is +supposed to work well under low memory conditions. In particular, it +never attempts higher order page allocation which is very likely to +fail under memory pressure. On the other hand, if we just use single +(0-order) pages, it would suffer from very high fragmentation -- +any object of size PAGE_SIZE/2 or larger would occupy an entire page. +This was one of the major issues with its predecessor (xvmalloc). + +To overcome these issues, zsmalloc allocates a bunch of 0-order pages +and links them together using various 'struct page' fields. These linked +pages act as a single higher-order page i.e. an object can span 0-order +page boundaries. The code refers to these linked pages as a single entity +called zspage. + +For simplicity, zsmalloc can only allocate objects of size up to PAGE_SIZE +since this satisfies the requirements of all its current users (in the +worst case, page is incompressible and is thus stored "as-is" i.e. in +uncompressed form). For allocation requests larger than this size, failure +is returned (see zs_malloc). + +Additionally, zs_malloc() does not return a dereferenceable pointer. +Instead, it returns an opaque handle (unsigned long) which encodes actual +location of the allocated object. The reason for this indirection is that +zsmalloc does not keep zspages permanently mapped since that would cause +issues on 32-bit systems where the VA region for kernel space mappings +is very small. So, before using the allocating memory, the object has to +be mapped using zs_map_object() to get a usable pointer and subsequently +unmapped using zs_unmap_object(). + +stat +---- + +With CONFIG_ZSMALLOC_STAT, we could see zsmalloc internal information via +/sys/kernel/debug/zsmalloc/. Here is a sample of stat output: + +# cat /sys/kernel/debug/zsmalloc/zram0/classes + + class size almost_full almost_empty obj_allocated obj_used pages_used pages_per_zspage + .. + .. + 9 176 0 1 186 129 8 4 + 10 192 1 0 2880 2872 135 3 + 11 208 0 1 819 795 42 2 + 12 224 0 1 219 159 12 4 + .. + .. + + +class: index +size: object size zspage stores +almost_empty: the number of ZS_ALMOST_EMPTY zspages(see below) +almost_full: the number of ZS_ALMOST_FULL zspages(see below) +obj_allocated: the number of objects allocated +obj_used: the number of objects allocated to the user +pages_used: the number of pages allocated for the class +pages_per_zspage: the number of 0-order pages to make a zspage + +We assign a zspage to ZS_ALMOST_EMPTY fullness group when: + n <= N / f, where +n = number of allocated objects +N = total number of objects zspage can store +f = fullness_threshold_frac(ie, 4 at the moment) + +Similarly, we assign zspage to: + ZS_ALMOST_FULL when n > N / f + ZS_EMPTY when n == 0 + ZS_FULL when n == N diff --git a/Documentation/zh_CN/arm64/booting.txt b/Documentation/zh_CN/arm64/booting.txt index 6f6d956ac1c9724bd47fd6a5a77d22f09fe1cd9b..7cd36af11e71c2964082dc9d37540a7566923c31 100644 --- a/Documentation/zh_CN/arm64/booting.txt +++ b/Documentation/zh_CN/arm64/booting.txt @@ -15,6 +15,8 @@ Documentation/arm64/booting.txt 的中文翻译 交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻 译存在问题，请联系中文版维护者。 +本文翻译提交时的 Git 检出点为： bc465aa9d045feb0e13b4a8f32cc33c1943f62d6 + 英文版维护者： Will Deacon 中文版维护者： 傅炜 Fu Wei 中文版翻译者： 傅炜 Fu Wei @@ -88,22 +90,44 @@ AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内 u32 code0; /* 可执行代码 */ u32 code1; /* 可执行代码 */ - u64 text_offset; /* 映像装载偏移 */ - u64 res0 = 0; /* 保留 */ - u64 res1 = 0; /* 保留 */ + u64 text_offset; /* 映像装载偏移，小端模式 */ + u64 image_size; /* 映像实际大小, 小端模式 */ + u64 flags; /* 内核旗标, 小端模式 * u64 res2 = 0; /* 保留 */ u64 res3 = 0; /* 保留 */ u64 res4 = 0; /* 保留 */ u32 magic = 0x644d5241; /* 魔数, 小端, "ARM\x64" */ - u32 res5 = 0; /* 保留 */ + u32 res5; /* 保留 （用于 PE COFF 偏移） */ 映像头注释： +- 自 v3.17 起，除非另有说明，所有域都是小端模式。 + - code0/code1 负责跳转到 stext. -映像必须位于系统 RAM 起始处的特定偏移（当前是 0x80000）。系统 RAM -的起始地址必须是以 2MB 对齐的。 +- 当通过 EFI 启动时， 最初 code0/code1 被跳过。 + res5 是到 PE 文件头的偏移，而 PE 文件头含有 EFI 的启动入口点 （efi_stub_entry）。 + 当 stub 代码完成了它的使命，它会跳转到 code0 继续正常的启动流程。 + +- v3.17 之前，未明确指定 text_offset 的字节序。此时，image_size 为零， + 且 text_offset 依照内核字节序为 0x80000。 + 当 image_size 非零，text_offset 为小端模式且是有效值，应被引导加载程序使用。 + 当 image_size 为零，text_offset 可假定为 0x80000。 + +- flags 域 (v3.17 引入) 为 64 位小端模式，其编码如下： + 位 0: 内核字节序。 1 表示大端模式，0 表示小端模式。 + 位 1-63: 保留。 + +- 当 image_size 为零时，引导装载程序应该试图在内核映像末尾之后尽可能多地保留空闲内存 + 供内核直接使用。对内存空间的需求量因所选定的内核特性而异, 且无实际限制。 + +内核映像必须被放置在靠近可用系统内存起始的 2MB 对齐为基址的 text_offset 字节处，并从那里被调用。 +当前，对 Linux 来说在此基址以下的内存是无法使用的，因此强烈建议将系统内存的起始作为这个基址。 +从映像起始地址算起，最少必须为内核释放出 image_size 字节的空间。 + +任何提供给内核的内存（甚至在 2MB 对齐的基地址之前），若未从内核中标记为保留 +(如在设备树（dtb）的 memreserve 区域），都将被认为对内核是可用。 在跳转入内核前，必须符合以下状态： @@ -124,8 +148,12 @@ AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内 - 高速缓存、MMU MMU 必须关闭。 指令缓存开启或关闭都可以。 - 数据缓存必须关闭且无效。 - 外部高速缓存（如果存在）必须配置并禁用。 + 已载入的内核映像的相应内存区必须被清理，以达到缓存一致性点（PoC）。 + 当存在系统缓存或其他使能缓存的一致性主控器时，通常需使用虚拟地址维护其缓存，而非 set/way 操作。 + 遵从通过虚拟地址操作维护构架缓存的系统缓存必须被配置，并可以被使能。 + 而不通过虚拟地址操作维护构架缓存的系统缓存（不推荐），必须被配置且禁用。 + + *译者注：对于 PoC 以及缓存相关内容，请参考 ARMv8 构架参考手册 ARM DDI 0487A - 架构计时器 CNTFRQ 必须设定为计时器的频率，且 CNTVOFF 必须设定为对所有 CPU @@ -141,6 +169,14 @@ AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内 在进入内核映像的异常级中，所有构架中可写的系统寄存器必须通过软件 在一个更高的异常级别下初始化，以防止在 未知 状态下运行。 + 对于拥有 GICv3 中断控制器的系统： + - 若当前在 EL3 ： + ICC_SRE_EL3.Enable (位 3) 必须初始化为 0b1。 + ICC_SRE_EL3.SRE (位 0) 必须初始化为 0b1。 + - 若内核运行在 EL1： + ICC_SRE_EL2.Enable (位 3) 必须初始化为 0b1。 + ICC_SRE_EL2.SRE (位 0) 必须初始化为 0b1。 + 以上对于 CPU 模式、高速缓存、MMU、架构计时器、一致性、系统寄存器的 必要条件描述适用于所有 CPU。所有 CPU 必须在同一异常级别跳入内核。 @@ -170,7 +206,7 @@ AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内 ARM DEN 0022A：用于 ARM 上的电源状态协调接口系统软件）中描述的 CPU_ON 调用来将 CPU 带入内核。 - *译者注:到文档翻译时，此文档已更新为 ARM DEN 0022B。 + *译者注: ARM DEN 0022A 已更新到 ARM DEN 0022C。 设备树必须包含一个 ‘psci’ 节点，请参考以下文档： Documentation/devicetree/bindings/arm/psci.txt diff --git a/Documentation/zh_CN/arm64/legacy_instructions.txt b/Documentation/zh_CN/arm64/legacy_instructions.txt new file mode 100644 index 0000000000000000000000000000000000000000..68362a1ab7179a6ed0d3346c3a74d206d515485f --- /dev/null +++ b/Documentation/zh_CN/arm64/legacy_instructions.txt @@ -0,0 +1,72 @@ +Chinese translated version of Documentation/arm64/legacy_instructions.txt + +If you have any comment or update to the content, please contact the +original document maintainer directly. However, if you have a problem +communicating in English you can also ask the Chinese maintainer for +help. Contact the Chinese maintainer if this translation is outdated +or if there is a problem with the translation. + +Maintainer: Punit Agrawal + Suzuki K. Poulose +Chinese maintainer: Fu Wei +--------------------------------------------------------------------- +Documentation/arm64/legacy_instructions.txt 的中文翻译 + +如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文 +交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻 +译存在问题，请联系中文版维护者。 + +本文翻译提交时的 Git 检出点为： bc465aa9d045feb0e13b4a8f32cc33c1943f62d6 + +英文版维护者： Punit Agrawal + Suzuki K. Poulose +中文版维护者： 傅炜 Fu Wei +中文版翻译者： 傅炜 Fu Wei +中文版校译者： 傅炜 Fu Wei + +以下为正文 +--------------------------------------------------------------------- +Linux 内核在 arm64 上的移植提供了一个基础框架，以支持构架中正在被淘汰或已废弃指令的模拟执行。 +这个基础框架的代码使用未定义指令钩子（hooks）来支持模拟。如果指令存在，它也允许在硬件中启用该指令。 + +模拟模式可通过写 sysctl 节点（/proc/sys/abi）来控制。 +不同的执行方式及 sysctl 节点的相应值，解释如下： + +* Undef（未定义） + 值： 0 + 产生未定义指令终止异常。它是那些构架中已废弃的指令，如 SWP，的默认处理方式。 + +* Emulate（模拟） + 值： 1 + 使用软件模拟方式。为解决软件迁移问题，这种模拟指令模式的使用是被跟踪的，并会发出速率限制警告。 + 它是那些构架中正在被淘汰的指令，如 CP15 barriers（隔离指令），的默认处理方式。 + +* Hardware Execution（硬件执行） + 值： 2 + 虽然标记为正在被淘汰，但一些实现可能提供硬件执行这些指令的使能/禁用操作。 + 使用硬件执行一般会有更好的性能，但将无法收集运行时对正被淘汰指令的使用统计数据。 + +默认执行模式依赖于指令在构架中状态。正在被淘汰的指令应该以模拟（Emulate）作为默认模式， +而已废弃的指令必须默认使用未定义（Undef）模式 + +注意：指令模拟可能无法应对所有情况。更多详情请参考单独的指令注释。 + +受支持的遗留指令 +------------- +* SWP{B} +节点: /proc/sys/abi/swp +状态: 已废弃 +默认执行方式: Undef (0) + +* CP15 Barriers +节点: /proc/sys/abi/cp15_barrier +状态: 正被淘汰，不推荐使用 +默认执行方式: Emulate (1) + +* SETEND +节点: /proc/sys/abi/setend +状态: 正被淘汰，不推荐使用 +默认执行方式: Emulate (1)* +注：为了使能这个特性，系统中的所有 CPU 必须在 EL0 支持混合字节序。 +如果一个新的 CPU （不支持混合字节序） 在使能这个特性后被热插入系统， +在应用中可能会出现不可预期的结果。 diff --git a/Documentation/zh_CN/arm64/memory.txt b/Documentation/zh_CN/arm64/memory.txt index a782704c1cb59ab868de82d573291ac8780f6297..19b3a52d5d9479178604a0d73666c27a2ff17f07 100644 --- a/Documentation/zh_CN/arm64/memory.txt +++ b/Documentation/zh_CN/arm64/memory.txt @@ -15,6 +15,8 @@ Documentation/arm64/memory.txt 的中文翻译 交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻 译存在问题，请联系中文版维护者。 +本文翻译提交时的 Git 检出点为： bc465aa9d045feb0e13b4a8f32cc33c1943f62d6 + 英文版维护者： Catalin Marinas 中文版维护者： 傅炜 Fu Wei 中文版翻译者： 傅炜 Fu Wei @@ -26,69 +28,53 @@ Documentation/arm64/memory.txt 的中文翻译 =========================== 作者: Catalin Marinas -日期: 2012 年 02 月 20 日 本文档描述 AArch64 Linux 内核所使用的虚拟内存布局。此构架可以实现 页大小为 4KB 的 4 级转换表和页大小为 64KB 的 3 级转换表。 -AArch64 Linux 使用页大小为 4KB 的 3 级转换表配置，对于用户和内核 -都有 39-bit (512GB) 的虚拟地址空间。对于页大小为 64KB的配置，仅 -使用 2 级转换表，但内存布局相同。 +AArch64 Linux 使用 3 级或 4 级转换表，其页大小配置为 4KB，对于用户和内核 +分别都有 39-bit (512GB) 或 48-bit (256TB) 的虚拟地址空间。 +对于页大小为 64KB的配置，仅使用 2 级转换表，有 42-bit (4TB) 的虚拟地址空间，但内存布局相同。 -用户地址空间的 63:39 位为 0，而内核地址空间的相应位为 1。TTBRx 的 +用户地址空间的 63:48 位为 0，而内核地址空间的相应位为 1。TTBRx 的 选择由虚拟地址的 63 位给出。swapper_pg_dir 仅包含内核（全局）映射， -而用户 pgd 仅包含用户（非全局）映射。swapper_pgd_dir 地址被写入 +而用户 pgd 仅包含用户（非全局）映射。swapper_pg_dir 地址被写入 TTBR1 中，且从不写入 TTBR0。 -AArch64 Linux 在页大小为 4KB 时的内存布局： +AArch64 Linux 在页大小为 4KB，并使用 3 级转换表时的内存布局： 起始地址 结束地址 大小 用途 ----------------------------------------------------------------------- 0000000000000000 0000007fffffffff 512GB 用户空间 +ffffff8000000000 ffffffffffffffff 512GB 内核空间 -ffffff8000000000 ffffffbbfffeffff ~240GB vmalloc - -ffffffbbffff0000 ffffffbbffffffff 64KB [防护页] - -ffffffbc00000000 ffffffbdffffffff 8GB vmemmap - -ffffffbe00000000 ffffffbffbbfffff ~8GB [防护页，未来用于 vmmemap] -ffffffbffbc00000 ffffffbffbdfffff 2MB earlyprintk 设备 +AArch64 Linux 在页大小为 4KB，并使用 4 级转换表时的内存布局： -ffffffbffbe00000 ffffffbffbe0ffff 64KB PCI I/O 空间 - -ffffffbffbe10000 ffffffbcffffffff ~2MB [防护页] - -ffffffbffc000000 ffffffbfffffffff 64MB 模块 - -ffffffc000000000 ffffffffffffffff 256GB 内核逻辑内存映射 +起始地址 结束地址 大小 用途 +----------------------------------------------------------------------- +0000000000000000 0000ffffffffffff 256TB 用户空间 +ffff000000000000 ffffffffffffffff 256TB 内核空间 -AArch64 Linux 在页大小为 64KB 时的内存布局： +AArch64 Linux 在页大小为 64KB，并使用 2 级转换表时的内存布局： 起始地址 结束地址 大小 用途 ----------------------------------------------------------------------- 0000000000000000 000003ffffffffff 4TB 用户空间 +fffffc0000000000 ffffffffffffffff 4TB 内核空间 -fffffc0000000000 fffffdfbfffeffff ~2TB vmalloc - -fffffdfbffff0000 fffffdfbffffffff 64KB [防护页] - -fffffdfc00000000 fffffdfdffffffff 8GB vmemmap - -fffffdfe00000000 fffffdfffbbfffff ~8GB [防护页，未来用于 vmmemap] -fffffdfffbc00000 fffffdfffbdfffff 2MB earlyprintk 设备 +AArch64 Linux 在页大小为 64KB，并使用 3 级转换表时的内存布局： -fffffdfffbe00000 fffffdfffbe0ffff 64KB PCI I/O 空间 - -fffffdfffbe10000 fffffdfffbffffff ~2MB [防护页] +起始地址 结束地址 大小 用途 +----------------------------------------------------------------------- +0000000000000000 0000ffffffffffff 256TB 用户空间 +ffff000000000000 ffffffffffffffff 256TB 内核空间 -fffffdfffc000000 fffffdffffffffff 64MB 模块 -fffffe0000000000 ffffffffffffffff 2TB 内核逻辑内存映射 +更详细的内核虚拟内存布局，请参阅内核启动信息。 4KB 页大小的转换表查找： @@ -102,7 +88,7 @@ fffffe0000000000 ffffffffffffffff 2TB 内核逻辑内存映射 | | | | +-> [20:12] L3 索引 | | | +-----------> [29:21] L2 索引 | | +---------------------> [38:30] L1 索引 - | +-------------------------------> [47:39] L0 索引 (未使用) + | +-------------------------------> [47:39] L0 索引 +-------------------------------------------------> [63] TTBR0/1 @@ -115,10 +101,11 @@ fffffe0000000000 ffffffffffffffff 2TB 内核逻辑内存映射 | | | | v | | | | [15:0] 页内偏移 | | | +----------> [28:16] L3 索引 - | | +--------------------------> [41:29] L2 索引 (仅使用 38:29 ) - | +-------------------------------> [47:42] L1 索引 (未使用) + | | +--------------------------> [41:29] L2 索引 + | +-------------------------------> [47:42] L1 索引 +-------------------------------------------------> [63] TTBR0/1 + 当使用 KVM 时, 管理程序（hypervisor）在 EL2 中通过相对内核虚拟地址的 一个固定偏移来映射内核页（内核虚拟地址的高 24 位设为零）: diff --git a/Kbuild b/Kbuild index ab8ded92e870f55290d4d8283e4cbb1b849f8a58..6f0d82a9245d897c89a63819e857f474ab93066e 100644 --- a/Kbuild +++ b/Kbuild @@ -13,8 +13,9 @@ define sed-y s:->::; p;}" endef -quiet_cmd_offsets = GEN $@ -define cmd_offsets +# Use filechk to avoid rebuilds when a header changes, but the resulting file +# does not +define filechk_offsets (set -e; \ echo "#ifndef $2"; \ echo "#define $2"; \ @@ -24,9 +25,9 @@ define cmd_offsets echo " * This file was generated by Kbuild"; \ echo " */"; \ echo ""; \ - sed -ne $(sed-y) $<; \ + sed -ne $(sed-y); \ echo ""; \ - echo "#endif" ) > $@ + echo "#endif" ) endef ##### @@ -35,16 +36,15 @@ endef bounds-file := include/generated/bounds.h always := $(bounds-file) -targets := $(bounds-file) kernel/bounds.s +targets := kernel/bounds.s # We use internal kbuild rules to avoid the "is up to date" message from make kernel/bounds.s: kernel/bounds.c FORCE $(Q)mkdir -p $(dir $@) $(call if_changed_dep,cc_s_c) -$(obj)/$(bounds-file): kernel/bounds.s Kbuild - $(Q)mkdir -p $(dir $@) - $(call cmd,offsets,__LINUX_BOUNDS_H__) +$(obj)/$(bounds-file): kernel/bounds.s FORCE + $(call filechk,offsets,__LINUX_BOUNDS_H__) ##### # 2) Generate asm-offsets.h @@ -53,7 +53,6 @@ $(obj)/$(bounds-file): kernel/bounds.s Kbuild offsets-file := include/generated/asm-offsets.h always += $(offsets-file) -targets += $(offsets-file) targets += arch/$(SRCARCH)/kernel/asm-offsets.s # We use internal kbuild rules to avoid the "is up to date" message from make @@ -62,8 +61,8 @@ arch/$(SRCARCH)/kernel/asm-offsets.s: arch/$(SRCARCH)/kernel/asm-offsets.c \ $(Q)mkdir -p $(dir $@) $(call if_changed_dep,cc_s_c) -$(obj)/$(offsets-file): arch/$(SRCARCH)/kernel/asm-offsets.s Kbuild - $(call cmd,offsets,__ASM_OFFSETS_H__) +$(obj)/$(offsets-file): arch/$(SRCARCH)/kernel/asm-offsets.s FORCE + $(call filechk,offsets,__ASM_OFFSETS_H__) ##### # 3) Check for missing system calls diff --git a/MAINTAINERS b/MAINTAINERS index 38579ac581cebe678ee6eabda15c7933d89bfcee..10f1dacef8ac507a1045d5fbf8aa0f7e7b89ca66 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -569,6 +569,12 @@ L: nios2-dev@lists.rocketboards.org (moderated for non-subscribers) S: Maintained F: drivers/mailbox/mailbox-altera.c +ALTERA PIO DRIVER +M: Tien Hock Loh +L: linux-gpio@vger.kernel.org +S: Maintained +F: drivers/gpio/gpio-altera.c + ALTERA TRIPLE SPEED ETHERNET DRIVER M: Vince Bridgers L: netdev@vger.kernel.org @@ -625,16 +631,16 @@ F: drivers/iommu/amd_iommu*.[ch] F: include/linux/amd-iommu.h AMD KFD -M: Oded Gabbay -L: dri-devel@lists.freedesktop.org -T: git git://people.freedesktop.org/~gabbayo/linux.git -S: Supported -F: drivers/gpu/drm/amd/amdkfd/ +M: Oded Gabbay +L: dri-devel@lists.freedesktop.org +T: git git://people.freedesktop.org/~gabbayo/linux.git +S: Supported +F: drivers/gpu/drm/amd/amdkfd/ F: drivers/gpu/drm/amd/include/cik_structs.h F: drivers/gpu/drm/amd/include/kgd_kfd_interface.h -F: drivers/gpu/drm/radeon/radeon_kfd.c -F: drivers/gpu/drm/radeon/radeon_kfd.h -F: include/uapi/linux/kfd_ioctl.h +F: drivers/gpu/drm/radeon/radeon_kfd.c +F: drivers/gpu/drm/radeon/radeon_kfd.h +F: include/uapi/linux/kfd_ioctl.h AMD MICROCODE UPDATE SUPPORT M: Borislav Petkov @@ -880,12 +886,16 @@ S: Maintained F: drivers/media/rc/meson-ir.c N: meson[x68] +ARM/Annapurna Labs ALPINE ARCHITECTURE +M: Tsahee Zidenberg +S: Maintained +F: arch/arm/mach-alpine/ + ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES -M: Andrew Victor M: Nicolas Ferre +M: Alexandre Belloni M: Jean-Christophe Plagniol-Villard L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -W: http://maxim.org.za/at91_26.html W: http://www.linux4sam.org S: Supported F: arch/arm/mach-at91/ @@ -952,7 +962,7 @@ ARM/CORESIGHT FRAMEWORK AND DRIVERS M: Mathieu Poirier L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained -F: drivers/coresight/* +F: drivers/hwtracing/coresight/* F: Documentation/trace/coresight.txt F: Documentation/devicetree/bindings/arm/coresight.txt F: Documentation/ABI/testing/sysfs-bus-coresight-devices-* @@ -964,7 +974,7 @@ S: Maintained ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE M: Hans Ulli Kroll L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -T: git git://git.berlios.de/gemini-board +T: git git://github.com/ulli-kroll/linux.git S: Maintained F: arch/arm/mach-gemini/ @@ -979,6 +989,12 @@ F: drivers/clocksource/timer-prima2.c F: drivers/clocksource/timer-atlas7.c N: [^a-z]sirf +ARM/CONEXANT DIGICOLOR MACHINE SUPPORT +M: Baruch Siach +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +N: digicolor + ARM/EBSA110 MACHINE SUPPORT M: Russell King L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -1177,7 +1193,7 @@ ARM/MAGICIAN MACHINE SUPPORT M: Philipp Zabel S: Maintained -ARM/Marvell Armada 370 and Armada XP SOC support +ARM/Marvell Kirkwood and Armada 370, 375, 38x, XP SOC support M: Jason Cooper M: Andrew Lunn M: Gregory Clement @@ -1186,12 +1202,17 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-mvebu/ F: drivers/rtc/rtc-armada38x.c +F: arch/arm/boot/dts/armada* +F: arch/arm/boot/dts/kirkwood* + ARM/Marvell Berlin SoC support M: Sebastian Hesselbarth L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-berlin/ +F: arch/arm/boot/dts/berlin* + ARM/Marvell Dove/MV78xx0/Orion SOC support M: Jason Cooper @@ -1204,6 +1225,9 @@ F: arch/arm/mach-dove/ F: arch/arm/mach-mv78xx0/ F: arch/arm/mach-orion5x/ F: arch/arm/plat-orion/ +F: arch/arm/boot/dts/dove* +F: arch/arm/boot/dts/orion5x* + ARM/Orion SoC/Technologic Systems TS-78xx platform support M: Alexander Clouter @@ -1215,6 +1239,7 @@ F: arch/arm/mach-orion5x/ts78xx-* ARM/Mediatek SoC support M: Matthias Brugger L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +L: linux-mediatek@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/boot/dts/mt6* F: arch/arm/boot/dts/mt8* @@ -1254,22 +1279,6 @@ L: openmoko-kernel@lists.openmoko.org (subscribers-only) W: http://wiki.openmoko.org/wiki/Neo_FreeRunner S: Supported -ARM/QUALCOMM MSM MACHINE SUPPORT -M: David Brown -M: Daniel Walker -M: Bryan Huntsman -L: linux-arm-msm@vger.kernel.org -F: arch/arm/mach-msm/ -F: drivers/video/fbdev/msm/ -F: drivers/mmc/host/msm_sdcc.c -F: drivers/mmc/host/msm_sdcc.h -F: drivers/tty/serial/msm_serial.h -F: drivers/tty/serial/msm_serial.c -F: drivers/*/pm8???-* -F: drivers/mfd/ssbi.c -T: git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git -S: Maintained - ARM/TOSA MACHINE SUPPORT M: Dmitry Eremin-Solenikov M: Dirk Opfer @@ -1327,6 +1336,11 @@ L: linux-soc@vger.kernel.org S: Maintained F: arch/arm/mach-qcom/ F: drivers/soc/qcom/ +F: drivers/tty/serial/msm_serial.h +F: drivers/tty/serial/msm_serial.c +F: drivers/*/pm8???-* +F: drivers/mfd/ssbi.c +F: drivers/firmware/qcom_scm.c T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git ARM/RADISYS ENP2611 MACHINE SUPPORT @@ -1365,6 +1379,7 @@ N: rockchip ARM/SAMSUNG EXYNOS ARM ARCHITECTURES M: Kukjin Kim +M: Krzysztof Kozlowski L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers) S: Maintained @@ -1425,11 +1440,9 @@ F: arch/arm/boot/dts/emev2* F: arch/arm/boot/dts/r7s* F: arch/arm/boot/dts/r8a* F: arch/arm/boot/dts/sh* -F: arch/arm/configs/ape6evm_defconfig F: arch/arm/configs/armadillo800eva_defconfig F: arch/arm/configs/bockw_defconfig F: arch/arm/configs/kzm9g_defconfig -F: arch/arm/configs/mackerel_defconfig F: arch/arm/configs/marzen_defconfig F: arch/arm/configs/shmobile_defconfig F: arch/arm/include/debug/renesas-scif.S @@ -1440,9 +1453,10 @@ ARM/SOCFPGA ARCHITECTURE M: Dinh Nguyen S: Maintained F: arch/arm/mach-socfpga/ +F: arch/arm/boot/dts/socfpga* +F: arch/arm/configs/socfpga_defconfig W: http://www.rocketboards.org -T: git://git.rocketboards.org/linux-socfpga.git -T: git://git.rocketboards.org/linux-socfpga-next.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT M: Dinh Nguyen @@ -1764,7 +1778,7 @@ S: Supported F: drivers/tty/serial/atmel_serial.c ATMEL Audio ALSA driver -M: Bo Shen +M: Nicolas Ferre L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Supported F: sound/soc/atmel @@ -1821,7 +1835,7 @@ S: Supported F: drivers/spi/spi-atmel.* ATMEL SSC DRIVER -M: Bo Shen +M: Nicolas Ferre L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Supported F: drivers/misc/atmel-ssc.c @@ -1915,16 +1929,14 @@ S: Maintained F: drivers/media/radio/radio-aztech* B43 WIRELESS DRIVER -M: Stefano Brivio L: linux-wireless@vger.kernel.org L: b43-dev@lists.infradead.org W: http://wireless.kernel.org/en/users/Drivers/b43 -S: Maintained +S: Odd Fixes F: drivers/net/wireless/b43/ B43LEGACY WIRELESS DRIVER M: Larry Finger -M: Stefano Brivio L: linux-wireless@vger.kernel.org L: b43-dev@lists.infradead.org W: http://wireless.kernel.org/en/users/Drivers/b43 @@ -1932,7 +1944,7 @@ S: Maintained F: drivers/net/wireless/b43legacy/ BACKLIGHT CLASS/SUBSYSTEM -M: Jingoo Han +M: Jingoo Han M: Lee Jones S: Maintained F: drivers/video/backlight/ @@ -1967,10 +1979,10 @@ F: Documentation/filesystems/befs.txt F: fs/befs/ BECKHOFF CX5020 ETHERCAT MASTER DRIVER -M: Dariusz Marcinkiewicz -L: netdev@vger.kernel.org -S: Maintained -F: drivers/net/ethernet/ec_bhf.c +M: Dariusz Marcinkiewicz +L: netdev@vger.kernel.org +S: Maintained +F: drivers/net/ethernet/ec_bhf.c BFS FILE SYSTEM M: "Tigran A. Aivazian" @@ -2119,8 +2131,9 @@ S: Supported F: drivers/net/ethernet/broadcom/bnx2x/ BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE -M: Christian Daudt M: Florian Fainelli +M: Ray Jui +M: Scott Branden L: bcm-kernel-feedback-list@broadcom.com T: git git://github.com/broadcom/mach-bcm S: Maintained @@ -2171,7 +2184,6 @@ S: Maintained F: drivers/usb/gadget/udc/bcm63xx_udc.* BROADCOM BCM7XXX ARM ARCHITECTURE -M: Marc Carino M: Brian Norris M: Gregory Fong M: Florian Fainelli @@ -2525,6 +2537,13 @@ L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/chipidea/ +CHIPONE ICN8318 I2C TOUCHSCREEN DRIVER +M: Hans de Goede +L: linux-input@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt +F: drivers/input/touchscreen/chipone_icn8318.c + CHROME HARDWARE PLATFORM SUPPORT M: Olof Johansson S: Maintained @@ -2565,6 +2584,7 @@ F: include/linux/cleancache.h CLK API M: Russell King +L: linux-clk@vger.kernel.org S: Maintained F: include/linux/clk.h @@ -2625,7 +2645,7 @@ F: drivers/media/platform/coda/ COMMON CLK FRAMEWORK M: Mike Turquette M: Stephen Boyd -L: linux-kernel@vger.kernel.org +L: linux-clk@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git S: Maintained F: drivers/clk/ @@ -2818,6 +2838,7 @@ L: linux-crypto@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6.git S: Maintained F: Documentation/crypto/ +F: Documentation/DocBook/crypto-API.tmpl F: arch/*/crypto/ F: crypto/ F: drivers/crypto/ @@ -2888,11 +2909,11 @@ S: Supported F: drivers/net/ethernet/chelsio/cxgb3/ CXGB3 ISCSI DRIVER (CXGB3I) -M: Karen Xie -L: linux-scsi@vger.kernel.org -W: http://www.chelsio.com -S: Supported -F: drivers/scsi/cxgbi/cxgb3i +M: Karen Xie +L: linux-scsi@vger.kernel.org +W: http://www.chelsio.com +S: Supported +F: drivers/scsi/cxgbi/cxgb3i CXGB3 IWARP RNIC DRIVER (IW_CXGB3) M: Steve Wise @@ -2909,11 +2930,11 @@ S: Supported F: drivers/net/ethernet/chelsio/cxgb4/ CXGB4 ISCSI DRIVER (CXGB4I) -M: Karen Xie -L: linux-scsi@vger.kernel.org -W: http://www.chelsio.com -S: Supported -F: drivers/scsi/cxgbi/cxgb4i +M: Karen Xie +L: linux-scsi@vger.kernel.org +W: http://www.chelsio.com +S: Supported +F: drivers/scsi/cxgbi/cxgb4i CXGB4 IWARP RNIC DRIVER (IW_CXGB4) M: Steve Wise @@ -3060,10 +3081,16 @@ F: drivers/net/fddi/defxx.* DELL LAPTOP DRIVER M: Matthew Garrett +M: Pali Rohár L: platform-driver-x86@vger.kernel.org S: Maintained F: drivers/platform/x86/dell-laptop.c +DELL LAPTOP FREEFALL DRIVER +M: Pali Rohár +S: Maintained +F: drivers/platform/x86/dell-smo8800.c + DELL LAPTOP SMM DRIVER M: Guenter Roeck S: Maintained @@ -3078,6 +3105,7 @@ F: drivers/firmware/dcdbas.* DELL WMI EXTRAS DRIVER M: Matthew Garrett +M: Pali Rohár S: Maintained F: drivers/platform/x86/dell-wmi.c @@ -3265,12 +3293,6 @@ F: drivers/firmware/dmi-id.c F: drivers/firmware/dmi_scan.c F: include/linux/dmi.h -DOCKING STATION DRIVER -M: Shaohua Li -L: linux-acpi@vger.kernel.org -S: Supported -F: drivers/acpi/dock.c - DOCUMENTATION M: Jonathan Corbet L: linux-doc@vger.kernel.org @@ -3278,7 +3300,9 @@ S: Maintained F: Documentation/ X: Documentation/ABI/ X: Documentation/devicetree/ -X: Documentation/[a-z][a-z]_[A-Z][A-Z]/ +X: Documentation/acpi +X: Documentation/power +X: Documentation/spi T: git git://git.lwn.net/linux-2.6.git docs-next DOUBLETALK DRIVER @@ -3402,9 +3426,15 @@ T: git git://people.freedesktop.org/~airlied/linux S: Supported F: drivers/gpu/drm/rcar-du/ F: drivers/gpu/drm/shmobile/ -F: include/linux/platform_data/rcar-du.h F: include/linux/platform_data/shmob_drm.h +DRM DRIVERS FOR ROCKCHIP +M: Mark Yao +L: dri-devel@lists.freedesktop.org +S: Maintained +F: drivers/gpu/drm/rockchip/ +F: Documentation/devicetree/bindings/video/rockchip* + DSBR100 USB FM RADIO DRIVER M: Alexey Klimov L: linux-media@vger.kernel.org @@ -3897,7 +3927,7 @@ F: drivers/extcon/ F: Documentation/extcon/ EXYNOS DP DRIVER -M: Jingoo Han +M: Jingoo Han L: dri-devel@lists.freedesktop.org S: Maintained F: drivers/gpu/drm/exynos/exynos_dp* @@ -4324,6 +4354,15 @@ S: Supported F: drivers/phy/ F: include/linux/phy/ +GENERIC PM DOMAINS +M: "Rafael J. Wysocki" +M: Kevin Hilman +M: Ulf Hansson +L: linux-pm@vger.kernel.org +S: Supported +F: drivers/base/power/domain*.c +F: include/linux/pm_domain.h + GENERIC UIO DRIVER FOR PCI DEVICES M: "Michael S. Tsirkin" L: kvm@vger.kernel.org @@ -4337,21 +4376,20 @@ F: scripts/get_maintainer.pl GFS2 FILE SYSTEM M: Steven Whitehouse +M: Bob Peterson L: cluster-devel@redhat.com W: http://sources.redhat.com/cluster/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes.git -T: git git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2.git S: Supported F: Documentation/filesystems/gfs2*.txt F: fs/gfs2/ F: include/uapi/linux/gfs2_ondisk.h GIGASET ISDN DRIVERS -M: Hansjoerg Lipp -M: Tilman Schmidt +M: Paul Bolle L: gigaset307x-common@lists.sourceforge.net W: http://gigaset307x.sourceforge.net/ -S: Maintained +S: Odd Fixes F: Documentation/isdn/README.gigaset F: drivers/isdn/gigaset/ F: include/uapi/linux/gigaset_dev.h @@ -4450,7 +4488,7 @@ S: Maintained F: block/partitions/efi.* STK1160 USB VIDEO CAPTURE DRIVER -M: Ezequiel Garcia +M: Ezequiel Garcia L: linux-media@vger.kernel.org T: git git://linuxtv.org/media_tree.git S: Maintained @@ -4498,7 +4536,7 @@ M: Jean Delvare M: Guenter Roeck L: lm-sensors@lm-sensors.org W: http://www.lm-sensors.org/ -T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/ +T: quilt http://jdelvare.nerim.net/devel/linux/jdelvare-hwmon/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git S: Maintained F: Documentation/hwmon/ @@ -4605,6 +4643,18 @@ F: drivers/hid/ F: include/linux/hid* F: include/uapi/linux/hid* +HID SENSOR HUB DRIVERS +M: Jiri Kosina +M: Jonathan Cameron +M: Srinivas Pandruvada +L: linux-input@vger.kernel.org +L: linux-iio@vger.kernel.org +S: Maintained +F: Documentation/hid/hid-sensor* +F: drivers/hid/hid-sensor-* +F: drivers/iio/*/hid-* +F: include/linux/hid-sensor-* + HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS M: Thomas Gleixner L: linux-kernel@vger.kernel.org @@ -4993,6 +5043,11 @@ W: http://industrypack.sourceforge.net S: Maintained F: drivers/ipack/ +INGENIC JZ4780 DMA Driver +M: Zubair Lutfullah Kakakhel +S: Maintained +F: drivers/dma/dma-jz4780.c + INTEGRITY MEASUREMENT ARCHITECTURE (IMA) M: Mimi Zohar M: Dmitry Kasatkin @@ -5013,17 +5068,19 @@ S: Orphan F: drivers/video/fbdev/imsttfb.c INFINIBAND SUBSYSTEM -M: Roland Dreier +M: Doug Ledford M: Sean Hefty M: Hal Rosenstock L: linux-rdma@vger.kernel.org W: http://www.openfabrics.org/ Q: http://patchwork.kernel.org/project/linux-rdma/list/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma.git S: Supported F: Documentation/infiniband/ F: drivers/infiniband/ F: include/uapi/linux/if_infiniband.h +F: include/uapi/rdma/ +F: include/rdma/ INOTIFY M: John McCutchan @@ -5206,7 +5263,7 @@ F: arch/x86/kernel/tboot.c INTEL WIRELESS WIMAX CONNECTION 2400 M: Inaky Perez-Gonzalez M: linux-wimax@intel.com -L: wimax@linuxwimax.org (subscribers-only) +L: wimax@linuxwimax.org (subscribers-only) S: Supported W: http://linuxwimax.org F: Documentation/wimax/README.i2400m @@ -5284,6 +5341,13 @@ F: drivers/char/ipmi/ F: include/linux/ipmi* F: include/uapi/linux/ipmi* +QCOM AUDIO (ASoC) DRIVERS +M: Patrick Lai +M: Banajit Goswami +L: alsa-devel@alsa-project.org (moderated for non-subscribers) +S: Supported +F: sound/soc/qcom/ + IPS SCSI RAID DRIVER M: Adaptec OEM Raid Solutions L: linux-scsi@vger.kernel.org @@ -5769,6 +5833,7 @@ F: drivers/scsi/53c700* LED SUBSYSTEM M: Bryan Wu M: Richard Purdie +M: Jacek Anaszewski L: linux-leds@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git S: Maintained @@ -5902,7 +5967,7 @@ F: arch/powerpc/platforms/512x/ F: arch/powerpc/platforms/52xx/ LINUX FOR POWERPC EMBEDDED PPC4XX -M: Alistair Popple +M: Alistair Popple M: Matt Porter W: http://www.penguinppc.org/ L: linuxppc-dev@lists.ozlabs.org @@ -6135,16 +6200,6 @@ Q: http://patchwork.linuxtv.org/project/linux-media/list/ S: Maintained F: drivers/media/dvb-frontends/m88rs2000* -M88TS2022 MEDIA DRIVER -M: Antti Palosaari -L: linux-media@vger.kernel.org -W: http://linuxtv.org/ -W: http://palosaari.fi/linux/ -Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git -S: Maintained -F: drivers/media/tuners/m88ts2022* - MA901 MASTERKIT USB FM RADIO DRIVER M: Alexey Klimov L: linux-media@vger.kernel.org @@ -6337,6 +6392,7 @@ F: drivers/scsi/megaraid/ MELLANOX ETHERNET DRIVER (mlx4_en) M: Amir Vadai +M: Ido Shamay L: netdev@vger.kernel.org S: Supported W: http://www.mellanox.com @@ -6374,7 +6430,7 @@ S: Supported F: drivers/watchdog/mena21_wdt.c MEN CHAMELEON BUS (mcb) -M: Johannes Thumshirn +M: Johannes Thumshirn S: Supported F: drivers/mcb/ F: include/linux/mcb.h @@ -6567,6 +6623,7 @@ M: Laurent Pinchart L: linux-media@vger.kernel.org T: git git://linuxtv.org/media_tree.git S: Maintained +F: Documentation/devicetree/bindings/media/i2c/mt9v032.txt F: drivers/media/i2c/mt9v032.c F: include/media/mt9v032.h @@ -6922,6 +6979,17 @@ T: git git://git.rocketboards.org/linux-socfpga-next.git S: Maintained F: arch/nios2/ +NOKIA N900 POWER SUPPLY DRIVERS +M: Pali Rohár +S: Maintained +F: include/linux/power/bq2415x_charger.h +F: include/linux/power/bq27x00_battery.h +F: include/linux/power/isp1704_charger.h +F: drivers/power/bq2415x_charger.c +F: drivers/power/bq27x00_battery.c +F: drivers/power/isp1704_charger.c +F: drivers/power/rx51_battery.c + NTB DRIVER M: Jon Mason M: Dave Jiang @@ -6956,6 +7024,13 @@ S: Supported F: drivers/block/nvme* F: include/linux/nvme.h +NXP-NCI NFC DRIVER +M: Clément Perrochaud +R: Charles Gorand +L: linux-nfc@lists.01.org (moderated for non-subscribers) +S: Supported +F: drivers/nfc/nxp-nci + NXP TDA998X DRM DRIVER M: Russell King S: Supported @@ -6977,6 +7052,8 @@ Q: http://patchwork.kernel.org/project/linux-omap/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git S: Maintained F: arch/arm/*omap*/ +F: arch/arm/configs/omap1_defconfig +F: arch/arm/configs/omap2plus_defconfig F: drivers/i2c/busses/i2c-omap.c F: drivers/irqchip/irq-omap-intc.c F: drivers/mfd/*omap*.c @@ -7107,6 +7184,7 @@ OMAP IMAGING SUBSYSTEM (OMAP3 ISP and OMAP4 ISS) M: Laurent Pinchart L: linux-media@vger.kernel.org S: Maintained +F: Documentation/devicetree/bindings/media/ti,omap3isp.txt F: drivers/media/platform/omap3isp/ F: drivers/staging/media/omap4iss/ @@ -7206,6 +7284,15 @@ F: Documentation/devicetree/ F: arch/*/boot/dts/ F: include/dt-bindings/ +OPEN FIRMWARE AND DEVICE TREE OVERLAYS +M: Pantelis Antoniou +L: devicetree@vger.kernel.org +S: Maintained +F: Documentation/devicetree/dynamic-resolution-notes.txt +F: Documentation/devicetree/overlay-notes.txt +F: drivers/of/overlay.c +F: drivers/of/resolver.c + OPENRISC ARCHITECTURE M: Jonas Bonn W: http://openrisc.net @@ -7491,7 +7578,7 @@ S: Maintained F: drivers/pci/host/*rcar* PCI DRIVER FOR SAMSUNG EXYNOS -M: Jingoo Han +M: Jingoo Han L: linux-pci@vger.kernel.org L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers) @@ -7499,8 +7586,7 @@ S: Maintained F: drivers/pci/host/pci-exynos.c PCI DRIVER FOR SYNOPSIS DESIGNWARE -M: Mohit Kumar -M: Jingoo Han +M: Jingoo Han L: linux-pci@vger.kernel.org S: Maintained F: drivers/pci/host/*designware* @@ -7514,9 +7600,8 @@ F: Documentation/devicetree/bindings/pci/host-generic-pci.txt F: drivers/pci/host/pci-host-generic.c PCIE DRIVER FOR ST SPEAR13XX -M: Mohit Kumar L: linux-pci@vger.kernel.org -S: Maintained +S: Orphan F: drivers/pci/host/*spear* PCMCIA SUBSYSTEM @@ -7923,10 +8008,10 @@ L: rtc-linux@googlegroups.com S: Maintained QAT DRIVER -M: Tadeusz Struk -L: qat-linux@intel.com -S: Supported -F: drivers/crypto/qat/ +M: Tadeusz Struk +L: qat-linux@intel.com +S: Supported +F: drivers/crypto/qat/ QIB DRIVER M: Mike Marciniszyn @@ -8077,11 +8162,17 @@ S: Maintained F: drivers/net/wireless/rt2x00/ RAMDISK RAM BLOCK DEVICE DRIVER -M: Nick Piggin +M: Jens Axboe S: Maintained F: Documentation/blockdev/ramdisk.txt F: drivers/block/brd.c +PERSISTENT MEMORY DRIVER +M: Ross Zwisler +L: linux-nvdimm@lists.01.org +S: Supported +F: drivers/block/pmem.c + RANDOM NUMBER DRIVER M: "Theodore Ts'o" S: Maintained @@ -8153,6 +8244,7 @@ X: kernel/torture.c REAL TIME CLOCK (RTC) SUBSYSTEM M: Alessandro Zummo +M: Alexandre Belloni L: rtc-linux@googlegroups.com Q: http://patchwork.ozlabs.org/project/rtc-linux/list/ S: Maintained @@ -8364,7 +8456,6 @@ F: block/partitions/ibm.c S390 NETWORK DRIVERS M: Ursula Braun -M: Frank Blaschka M: linux390@de.ibm.com L: linux-s390@vger.kernel.org W: http://www.ibm.com/developerworks/linux/linux390/ @@ -8451,7 +8542,7 @@ S: Supported F: sound/soc/samsung/ SAMSUNG FRAMEBUFFER DRIVER -M: Jingoo Han +M: Jingoo Han L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/fbdev/s3c-fb.c @@ -8624,11 +8715,9 @@ F: drivers/scsi/sg.c F: include/scsi/sg.h SCSI SUBSYSTEM -M: "James E.J. Bottomley" +M: "James E.J. Bottomley" L: linux-scsi@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git -T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git -T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-pending-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git S: Maintained F: drivers/scsi/ F: include/scsi/ @@ -8758,15 +8847,25 @@ W: http://www.emulex.com S: Supported F: drivers/scsi/be2iscsi/ -SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER -M: Sathya Perla -M: Subbu Seetharaman -M: Ajit Khaparde +Emulex 10Gbps NIC BE2, BE3-R, Lancer, Skyhawk-R DRIVER +M: Sathya Perla +M: Ajit Khaparde +M: Padmanabh Ratnakar +M: Sriharsha Basavapatna L: netdev@vger.kernel.org W: http://www.emulex.com S: Supported F: drivers/net/ethernet/emulex/benet/ +EMULEX ONECONNECT ROCE DRIVER +M: Selvin Xavier +M: Devesh Sharma +M: Mitesh Ahuja +L: linux-rdma@vger.kernel.org +W: http://www.emulex.com +S: Supported +F: drivers/infiniband/hw/ocrdma/ + SFC NETWORK DRIVER M: Solarflare linux maintainers M: Shradha Shah @@ -8940,6 +9039,16 @@ T: git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git S: Maintained F: drivers/media/platform/am437x/ +OV2659 OMNIVISION SENSOR DRIVER +M: Lad, Prabhakar +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git +S: Maintained +F: drivers/media/i2c/ov2659.c +F: include/media/ov2659.h + SIS 190 ETHERNET DRIVER M: Francois Romieu L: netdev@vger.kernel.org @@ -9840,7 +9949,7 @@ F: include/linux/wl12xx.h TIPC NETWORK LAYER M: Jon Maloy -M: Allan Stephens +M: Ying Xue L: netdev@vger.kernel.org (core kernel code) L: tipc-discussion@lists.sourceforge.net (user apps, general discussion) W: http://tipc.sourceforge.net/ @@ -9889,10 +9998,23 @@ S: Maintained F: drivers/platform/x86/topstar-laptop.c TOSHIBA ACPI EXTRAS DRIVER +M: Azael Avalos L: platform-driver-x86@vger.kernel.org -S: Orphan +S: Maintained F: drivers/platform/x86/toshiba_acpi.c +TOSHIBA BLUETOOTH DRIVER +M: Azael Avalos +L: platform-driver-x86@vger.kernel.org +S: Maintained +F: drivers/platform/x86/toshiba_bluetooth.c + +TOSHIBA HDD ACTIVE PROTECTION SENSOR DRIVER +M: Azael Avalos +L: platform-driver-x86@vger.kernel.org +S: Maintained +F: drivers/platform/x86/toshiba_haps.c + TOSHIBA SMM DRIVER M: Jonathan Buzzard L: tlinux-users@tce.toshiba-dme.co.jp @@ -9944,6 +10066,7 @@ F: drivers/media/pci/tw68/ TPM DEVICE DRIVER M: Peter Huewe M: Marcel Selhorst +R: Jason Gunthorpe W: http://tpmdd.sourceforge.net L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers) Q: git git://github.com/PeterHuewe/linux-tpmdd.git @@ -10097,11 +10220,11 @@ F: include/linux/cdrom.h F: include/uapi/linux/cdrom.h UNISYS S-PAR DRIVERS -M: Benjamin Romer -M: David Kershner -L: sparmaintainer@unisys.com (Unisys internal) -S: Supported -F: drivers/staging/unisys/ +M: Benjamin Romer +M: David Kershner +L: sparmaintainer@unisys.com (Unisys internal) +S: Supported +F: drivers/staging/unisys/ UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER M: Vinayak Holikatti @@ -10448,7 +10571,6 @@ F: include/linux/virtio_console.h F: include/uapi/linux/virtio_console.h VIRTIO CORE, NET AND BLOCK DRIVERS -M: Rusty Russell M: "Michael S. Tsirkin" L: virtualization@lists.linux-foundation.org S: Maintained @@ -10468,6 +10590,12 @@ S: Maintained F: drivers/vhost/ F: include/uapi/linux/vhost.h +VIRTIO INPUT DRIVER +M: Gerd Hoffmann +S: Maintained +F: drivers/virtio/virtio_input.c +F: include/uapi/linux/virtio_input.h + VIA RHINE NETWORK DRIVER M: Roger Luethi S: Maintained @@ -10543,6 +10671,14 @@ L: linux-kernel@vger.kernel.org S: Maintained F: drivers/misc/vmw_balloon.c +VMWARE VMMOUSE SUBDRIVER +M: "VMware Graphics" +M: "VMware, Inc." +L: linux-input@vger.kernel.org +S: Maintained +F: drivers/input/mouse/vmmouse.c +F: drivers/input/mouse/vmmouse.h + VMWARE VMXNET3 ETHERNET DRIVER M: Shreyas Bhatewara M: "VMware, Inc." @@ -10658,7 +10794,7 @@ F: drivers/media/rc/winbond-cir.c WIMAX STACK M: Inaky Perez-Gonzalez M: linux-wimax@intel.com -L: wimax@linuxwimax.org (subscribers-only) +L: wimax@linuxwimax.org (subscribers-only) S: Supported W: http://linuxwimax.org F: Documentation/wimax/README.wimax @@ -10868,6 +11004,16 @@ L: linux-serial@vger.kernel.org S: Maintained F: drivers/tty/serial/uartlite.c +XILINX VIDEO IP CORES +M: Hyun Kwon +M: Laurent Pinchart +L: linux-media@vger.kernel.org +T: git git://linuxtv.org/media_tree.git +S: Supported +F: Documentation/devicetree/bindings/media/xilinx/ +F: drivers/media/platform/xilinx/ +F: include/uapi/linux/xilinx-v4l2-controls.h + XILLYBUS DRIVER M: Eli Billauer L: linux-kernel@vger.kernel.org @@ -10932,6 +11078,7 @@ F: drivers/media/pci/zoran/ ZRAM COMPRESSED RAM BLOCK DEVICE DRVIER M: Minchan Kim M: Nitin Gupta +R: Sergey Senozhatsky L: linux-kernel@vger.kernel.org S: Maintained F: drivers/block/zram/ @@ -10949,6 +11096,7 @@ L: linux-mm@kvack.org S: Maintained F: mm/zsmalloc.c F: include/linux/zsmalloc.h +F: Documentation/vm/zsmalloc.txt ZSWAP COMPRESSED SWAP CACHING M: Seth Jennings diff --git a/Makefile b/Makefile index 9b76ce1e08bbb80d15e3f2ee4859157323a23ee0..dc20bcb9b2711f83d02bab35375117bbdf892bf5 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 -PATCHLEVEL = 0 +PATCHLEVEL = 1 SUBLEVEL = 0 -EXTRAVERSION = +EXTRAVERSION = -rc4 NAME = Hurr durr I'ma sheep # *DOCUMENTATION* @@ -10,9 +10,10 @@ NAME = Hurr durr I'ma sheep # Comments in this file are targeted only to the developer, do not # expect to learn how to build the kernel reading this file. -# Do not use make's built-in rules and variables -# (this increases performance and avoids hard-to-debug behaviour); -MAKEFLAGS += -rR +# o Do not use make's built-in rules and variables +# (this increases performance and avoids hard-to-debug behaviour); +# o Look for make include files relative to root of kernel src +MAKEFLAGS += -rR --include-dir=$(CURDIR) # Avoid funny character set dependencies unexport LC_ALL @@ -344,12 +345,9 @@ endif export COMPILER endif -# Look for make include files relative to root of kernel src -MAKEFLAGS += --include-dir=$(srctree) - # We need some generic definitions (do not try to remake the file). -$(srctree)/scripts/Kbuild.include: ; -include $(srctree)/scripts/Kbuild.include +scripts/Kbuild.include: ; +include scripts/Kbuild.include # Make variables (CC, etc...) AS = $(CROSS_COMPILE)as @@ -533,7 +531,7 @@ ifeq ($(config-targets),1) # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed. # KBUILD_DEFCONFIG may point out an alternative default configuration # used for 'make defconfig' -include $(srctree)/arch/$(SRCARCH)/Makefile +include arch/$(SRCARCH)/Makefile export KBUILD_DEFCONFIG KBUILD_KCONFIG config: scripts_basic outputmakefile FORCE @@ -609,7 +607,7 @@ endif # $(dot-config) # Defaults to vmlinux, but the arch makefile usually adds further targets all: vmlinux -include $(srctree)/arch/$(SRCARCH)/Makefile +include arch/$(SRCARCH)/Makefile KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,) @@ -782,8 +780,8 @@ ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y) KBUILD_AFLAGS += -DCC_HAVE_ASM_GOTO endif -include $(srctree)/scripts/Makefile.kasan -include $(srctree)/scripts/Makefile.extrawarn +include scripts/Makefile.kasan +include scripts/Makefile.extrawarn # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments KBUILD_CPPFLAGS += $(KCPPFLAGS) @@ -1026,12 +1024,6 @@ headerdep: $(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \ $(srctree)/scripts/headerdep.pl -I$(srctree)/include -# --------------------------------------------------------------------------- - -PHONY += depend dep -depend dep: - @echo '*** Warning: make $@ is unnecessary now.' - # --------------------------------------------------------------------------- # Firmware install INSTALL_FW_PATH=$(INSTALL_MOD_PATH)/lib/firmware diff --git a/README b/README index a24ec89ba4420ad38e8848422ca5f69baa5ffe1c..69c68fb4a10908a4f8d1986c6fdad2ec7b3c397b 100644 --- a/README +++ b/README @@ -1,6 +1,6 @@ - Linux kernel release 3.x + Linux kernel release 4.x -These are the release notes for Linux version 3. Read them carefully, +These are the release notes for Linux version 4. Read them carefully, as they tell you what this is all about, explain how to install the kernel, and what to do if something goes wrong. @@ -62,11 +62,7 @@ INSTALLING the kernel source: directory where you have permissions (eg. your home directory) and unpack it: - gzip -cd linux-3.X.tar.gz | tar xvf - - - or - - bzip2 -dc linux-3.X.tar.bz2 | tar xvf - + xz -cd linux-4.X.tar.xz | tar xvf - Replace "X" with the version number of the latest kernel. @@ -75,16 +71,12 @@ INSTALLING the kernel source: files. They should match the library, and not get messed up by whatever the kernel-du-jour happens to be. - - You can also upgrade between 3.x releases by patching. Patches are - distributed in the traditional gzip and the newer bzip2 format. To - install by patching, get all the newer patch files, enter the - top level directory of the kernel source (linux-3.X) and execute: - - gzip -cd ../patch-3.x.gz | patch -p1 - - or + - You can also upgrade between 4.x releases by patching. Patches are + distributed in the xz format. To install by patching, get all the + newer patch files, enter the top level directory of the kernel source + (linux-4.X) and execute: - bzip2 -dc ../patch-3.x.bz2 | patch -p1 + xz -cd ../patch-4.x.xz | patch -p1 Replace "x" for all versions bigger than the version "X" of your current source tree, _in_order_, and you should be ok. You may want to remove @@ -92,13 +84,13 @@ INSTALLING the kernel source: that there are no failed patches (some-file-name# or some-file-name.rej). If there are, either you or I have made a mistake. - Unlike patches for the 3.x kernels, patches for the 3.x.y kernels + Unlike patches for the 4.x kernels, patches for the 4.x.y kernels (also known as the -stable kernels) are not incremental but instead apply - directly to the base 3.x kernel. For example, if your base kernel is 3.0 - and you want to apply the 3.0.3 patch, you must not first apply the 3.0.1 - and 3.0.2 patches. Similarly, if you are running kernel version 3.0.2 and - want to jump to 3.0.3, you must first reverse the 3.0.2 patch (that is, - patch -R) _before_ applying the 3.0.3 patch. You can read more on this in + directly to the base 4.x kernel. For example, if your base kernel is 4.0 + and you want to apply the 4.0.3 patch, you must not first apply the 4.0.1 + and 4.0.2 patches. Similarly, if you are running kernel version 4.0.2 and + want to jump to 4.0.3, you must first reverse the 4.0.2 patch (that is, + patch -R) _before_ applying the 4.0.3 patch. You can read more on this in Documentation/applying-patches.txt Alternatively, the script patch-kernel can be used to automate this @@ -120,7 +112,7 @@ INSTALLING the kernel source: SOFTWARE REQUIREMENTS - Compiling and running the 3.x kernels requires up-to-date + Compiling and running the 4.x kernels requires up-to-date versions of various software packages. Consult Documentation/Changes for the minimum version numbers required and how to get updates for these packages. Beware that using @@ -137,12 +129,12 @@ BUILD directory for the kernel: place for the output files (including .config). Example: - kernel source code: /usr/src/linux-3.X + kernel source code: /usr/src/linux-4.X build directory: /home/name/build/kernel To configure and build the kernel, use: - cd /usr/src/linux-3.X + cd /usr/src/linux-4.X make O=/home/name/build/kernel menuconfig make O=/home/name/build/kernel sudo make O=/home/name/build/kernel modules_install install diff --git a/arch/Kconfig b/arch/Kconfig index 05d7a8a458d5850c181e527c2039904c66239de5..a65eafb24997e547168b152f04f96fe2e1aba01e 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -32,7 +32,7 @@ config HAVE_OPROFILE config OPROFILE_NMI_TIMER def_bool y - depends on PERF_EVENTS && HAVE_PERF_EVENTS_NMI + depends on PERF_EVENTS && HAVE_PERF_EVENTS_NMI && !PPC64 config KPROBES bool "Kprobes" @@ -446,6 +446,9 @@ config HAVE_IRQ_TIME_ACCOUNTING config HAVE_ARCH_TRANSPARENT_HUGEPAGE bool +config HAVE_ARCH_HUGE_VMAP + bool + config HAVE_ARCH_SOFT_DIRTY bool @@ -484,6 +487,18 @@ config HAVE_IRQ_EXIT_ON_IRQ_STACK This spares a stack switch and improves cache usage on softirq processing. +config PGTABLE_LEVELS + int + default 2 + +config ARCH_HAS_ELF_RANDOMIZE + bool + help + An architecture supports choosing randomized locations for + stack, mmap, brk, and ET_DYN. Defined functions: + - arch_mmap_rnd() + - arch_randomize_brk() + # # ABI hall of shame # diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index b7ff9a318c31c3f849c5a2223582132ebde83f72..bf9e9d3b379218b74aa2bf6506d62f7978f71abd 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -76,6 +76,10 @@ config GENERIC_ISA_DMA bool default y +config PGTABLE_LEVELS + int + default 3 + source "init/Kconfig" source "kernel/Kconfig.freezer" diff --git a/arch/alpha/include/asm/processor.h b/arch/alpha/include/asm/processor.h index b4cf036903942cb984ede0e5ba0b880526fa46c2..43a7559c448b4e419af2e7fddf954c4fc283ac97 100644 --- a/arch/alpha/include/asm/processor.h +++ b/arch/alpha/include/asm/processor.h @@ -44,6 +44,7 @@ struct task_struct; extern unsigned long thread_saved_pc(struct task_struct *); /* Do necessary setup to start up a newly executed thread. */ +struct pt_regs; extern void start_thread(struct pt_regs *, unsigned long, unsigned long); /* Free all resources held by a thread. */ diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h index d5b98ab514bbda2bbd6270ea7802a8a402857f37..32e920a83ae57b88431adaf4957672e6cbdb02f0 100644 --- a/arch/alpha/include/asm/thread_info.h +++ b/arch/alpha/include/asm/thread_info.h @@ -18,7 +18,6 @@ struct thread_info { unsigned int flags; /* low level flags */ unsigned int ieee_state; /* see fpu.h */ - struct exec_domain *exec_domain; /* execution domain */ mm_segment_t addr_limit; /* thread address space */ unsigned cpu; /* current CPU */ int preempt_count; /* 0 => preemptable, <0 => BUG */ @@ -35,7 +34,6 @@ struct thread_info { #define INIT_THREAD_INFO(tsk) \ { \ .task = &tsk, \ - .exec_domain = &default_exec_domain, \ .addr_limit = KERNEL_DS, \ .preempt_count = INIT_PREEMPT_COUNT, \ } diff --git a/arch/arc/Kconfig.debug b/arch/arc/Kconfig.debug index a7fc0da25650ef8920e5cfc9f25d417a36081617..ff6a4b5ce92781442aa10f37537d0d6afb1d15f3 100644 --- a/arch/arc/Kconfig.debug +++ b/arch/arc/Kconfig.debug @@ -2,19 +2,6 @@ menu "Kernel hacking" source "lib/Kconfig.debug" -config EARLY_PRINTK - bool "Early printk" if EMBEDDED - default y - help - Write kernel log output directly into the VGA buffer or to a serial - port. - - This is useful for kernel debugging when your machine crashes very - early before the console code is initialized. For normal operation - it is not recommended because it looks ugly and doesn't cooperate - with klogd/syslogd or the X server. You should normally N here, - unless you want to debug such a crash. - config 16KSTACKS bool "Use 16Kb for kernel stacks instead of 8Kb" help diff --git a/arch/arc/boot/dts/angel4.dts b/arch/arc/boot/dts/angel4.dts index 757e0c62c4f98c18139d3ce71c008467549b87ef..3b076fbd83661c1c1889ce178465fb881d24f111 100644 --- a/arch/arc/boot/dts/angel4.dts +++ b/arch/arc/boot/dts/angel4.dts @@ -64,7 +64,7 @@ }; arcpmu0: pmu { - compatible = "snps,arc700-pmu"; + compatible = "snps,arc700-pct"; }; }; }; diff --git a/arch/arc/configs/nsimosci_defconfig b/arch/arc/configs/nsimosci_defconfig index 278dacf2a3f94c66830815572a28d2f754e6abc8..d2ac4e56ba1dd6955c43044aa0ec8da7e062c785 100644 --- a/arch/arc/configs/nsimosci_defconfig +++ b/arch/arc/configs/nsimosci_defconfig @@ -2,6 +2,9 @@ CONFIG_CROSS_COMPILE="arc-linux-uclibc-" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_DEFAULT_HOSTNAME="ARCLinux" # CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y @@ -9,7 +12,7 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../arc_initramfs" +CONFIG_INITRAMFS_SOURCE="../arc_initramfs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y # CONFIG_SLUB_DEBUG is not set @@ -21,12 +24,9 @@ CONFIG_MODULES=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARC_PLAT_FPGA_LEGACY=y -# CONFIG_ARC_IDE is not set -# CONFIG_ARCTANGENT_EMAC is not set # CONFIG_ARC_HAS_RTSC is not set CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci" # CONFIG_COMPACTION is not set -# CONFIG_CROSS_MEMORY_ATTACH is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -39,23 +39,23 @@ CONFIG_INET=y # CONFIG_FIRMWARE_IN_KERNEL is not set # CONFIG_BLK_DEV is not set CONFIG_NETDEVICES=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_INPUT_EVDEV=y # CONFIG_MOUSE_PS2_ALPS is not set # CONFIG_MOUSE_PS2_LOGIPS2PP is not set # CONFIG_MOUSE_PS2_SYNAPTICS is not set +# CONFIG_MOUSE_PS2_CYPRESS is not set # CONFIG_MOUSE_PS2_TRACKPOINT is not set CONFIG_MOUSE_PS2_TOUCHKIT=y -# CONFIG_SERIO_I8042 is not set # CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_ARC_PS2=y # CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SERIAL_ARC=y -CONFIG_SERIAL_ARC_CONSOLE=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set CONFIG_FB=y @@ -72,4 +72,3 @@ CONFIG_TMPFS=y CONFIG_NFS_FS=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_XZ_DEC=y diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h index be33db8a2ee3c3af4ea3d2c9670d4388933a1969..e2b1b1211b0d4ddbb527ed7239eaf05759dfae27 100644 --- a/arch/arc/include/asm/arcregs.h +++ b/arch/arc/include/asm/arcregs.h @@ -30,6 +30,7 @@ #define ARC_REG_D_UNCACH_BCR 0x6A #define ARC_REG_BPU_BCR 0xc0 #define ARC_REG_ISA_CFG_BCR 0xc1 +#define ARC_REG_RTT_BCR 0xF2 #define ARC_REG_SMART_BCR 0xFF /* status32 Bits Positions */ @@ -50,11 +51,7 @@ * [15: 8] = Exception Cause Code * [ 7: 0] = Exception Parameters (for certain types only) */ -#define ECR_VEC_MASK 0xff0000 -#define ECR_CODE_MASK 0x00ff00 -#define ECR_PARAM_MASK 0x0000ff - -/* Exception Cause Vector Values */ +#define ECR_V_MEM_ERR 0x01 #define ECR_V_INSN_ERR 0x02 #define ECR_V_MACH_CHK 0x20 #define ECR_V_ITLB_MISS 0x21 @@ -62,7 +59,8 @@ #define ECR_V_PROTV 0x23 #define ECR_V_TRAP 0x25 -/* Protection Violation Exception Cause Code Values */ +/* DTLB Miss and Protection Violation Cause Codes */ + #define ECR_C_PROTV_INST_FETCH 0x00 #define ECR_C_PROTV_LOAD 0x01 #define ECR_C_PROTV_STORE 0x02 @@ -173,11 +171,11 @@ } \ } -#define WRITE_BCR(reg, into) \ +#define WRITE_AUX(reg, into) \ { \ unsigned int tmp; \ if (sizeof(tmp) == sizeof(into)) { \ - tmp = (*(unsigned int *)(into)); \ + tmp = (*(unsigned int *)&(into)); \ write_aux_reg(reg, tmp); \ } else { \ extern void bogus_undefined(void); \ diff --git a/arch/arc/include/asm/atomic.h b/arch/arc/include/asm/atomic.h index 067551b6920af99fe733f1f13d4aee8b1903a77b..9917a45fc430d042a4f59006abf84ceedad1bca7 100644 --- a/arch/arc/include/asm/atomic.h +++ b/arch/arc/include/asm/atomic.h @@ -99,7 +99,7 @@ static inline void atomic_##op(int i, atomic_t *v) \ atomic_ops_unlock(flags); \ } -#define ATOMIC_OP_RETURN(op, c_op) \ +#define ATOMIC_OP_RETURN(op, c_op, asm_op) \ static inline int atomic_##op##_return(int i, atomic_t *v) \ { \ unsigned long flags; \ diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h index 1a5bf07eefe2d445861ecafd2ac03b0b36e9c458..4051e9525939fd9050b06b048bec8e1a47307d7b 100644 --- a/arch/arc/include/asm/bitops.h +++ b/arch/arc/include/asm/bitops.h @@ -32,6 +32,20 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *m) m += nr >> 5; + /* + * ARC ISA micro-optimization: + * + * Instructions dealing with bitpos only consider lower 5 bits (0-31) + * e.g (x << 33) is handled like (x << 1) by ASL instruction + * (mem pointer still needs adjustment to point to next word) + * + * Hence the masking to clamp @nr arg can be elided in general. + * + * However if @nr is a constant (above assumed it in a register), + * and greater than 31, gcc can optimize away (x << 33) to 0, + * as overflow, given the 32-bit ISA. Thus masking needs to be done + * for constant @nr, but no code is generated due to const prop. + */ if (__builtin_constant_p(nr)) nr &= 0x1f; @@ -374,29 +388,20 @@ __test_and_change_bit(unsigned long nr, volatile unsigned long *m) * This routine doesn't need to be atomic. */ static inline int -__constant_test_bit(unsigned int nr, const volatile unsigned long *addr) -{ - return ((1UL << (nr & 31)) & - (((const volatile unsigned int *)addr)[nr >> 5])) != 0; -} - -static inline int -__test_bit(unsigned int nr, const volatile unsigned long *addr) +test_bit(unsigned int nr, const volatile unsigned long *addr) { unsigned long mask; addr += nr >> 5; - /* ARC700 only considers 5 bits in bit-fiddling insn */ + if (__builtin_constant_p(nr)) + nr &= 0x1f; + mask = 1 << nr; return ((mask & *addr) != 0); } -#define test_bit(nr, addr) (__builtin_constant_p(nr) ? \ - __constant_test_bit((nr), (addr)) : \ - __test_bit((nr), (addr))) - /* * Count the number of zeros, starting from MSB * Helper for fls( ) friends diff --git a/arch/arc/include/asm/perf_event.h b/arch/arc/include/asm/perf_event.h index cbf755e32a03f3c19296b552e3f767865fbacc86..2b8880e953a294f4dc4abf7fbe7ae04580dd82ce 100644 --- a/arch/arc/include/asm/perf_event.h +++ b/arch/arc/include/asm/perf_event.h @@ -54,29 +54,13 @@ struct arc_reg_cc_build { #define PERF_COUNT_ARC_BPOK (PERF_COUNT_HW_MAX + 3) #define PERF_COUNT_ARC_EDTLB (PERF_COUNT_HW_MAX + 4) #define PERF_COUNT_ARC_EITLB (PERF_COUNT_HW_MAX + 5) -#define PERF_COUNT_ARC_HW_MAX (PERF_COUNT_HW_MAX + 6) +#define PERF_COUNT_ARC_LDC (PERF_COUNT_HW_MAX + 6) +#define PERF_COUNT_ARC_STC (PERF_COUNT_HW_MAX + 7) + +#define PERF_COUNT_ARC_HW_MAX (PERF_COUNT_HW_MAX + 8) /* - * The "generalized" performance events seem to really be a copy - * of the available events on x86 processors; the mapping to ARC - * events is not always possible 1-to-1. Fortunately, there doesn't - * seem to be an exact definition for these events, so we can cheat - * a bit where necessary. - * - * In particular, the following PERF events may behave a bit differently - * compared to other architectures: - * - * PERF_COUNT_HW_CPU_CYCLES - * Cycles not in halted state - * - * PERF_COUNT_HW_REF_CPU_CYCLES - * Reference cycles not in halted state, same as PERF_COUNT_HW_CPU_CYCLES - * for now as we don't do Dynamic Voltage/Frequency Scaling (yet) - * - * PERF_COUNT_HW_BUS_CYCLES - * Unclear what this means, Intel uses 0x013c, which according to - * their datasheet means "unhalted reference cycles". It sounds similar - * to PERF_COUNT_HW_REF_CPU_CYCLES, and we use the same counter for it. + * Some ARC pct quirks: * * PERF_COUNT_HW_STALLED_CYCLES_BACKEND * PERF_COUNT_HW_STALLED_CYCLES_FRONTEND @@ -91,21 +75,38 @@ struct arc_reg_cc_build { * Note that I$ cache misses aren't counted by either of the two! */ +/* + * ARC PCT has hardware conditions with fixed "names" but variable "indexes" + * (based on a specific RTL build) + * Below is the static map between perf generic/arc specific event_id and + * h/w condition names. + * At the time of probe, we loop thru each index and find it's name to + * complete the mapping of perf event_id to h/w index as latter is needed + * to program the counter really + */ static const char * const arc_pmu_ev_hw_map[] = { + /* count cycles */ [PERF_COUNT_HW_CPU_CYCLES] = "crun", [PERF_COUNT_HW_REF_CPU_CYCLES] = "crun", [PERF_COUNT_HW_BUS_CYCLES] = "crun", - [PERF_COUNT_HW_INSTRUCTIONS] = "iall", - [PERF_COUNT_HW_BRANCH_MISSES] = "bpfail", - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmp", + [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = "bflush", [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = "bstall", - [PERF_COUNT_ARC_DCLM] = "dclm", - [PERF_COUNT_ARC_DCSM] = "dcsm", - [PERF_COUNT_ARC_ICM] = "icm", - [PERF_COUNT_ARC_BPOK] = "bpok", - [PERF_COUNT_ARC_EDTLB] = "edtlb", - [PERF_COUNT_ARC_EITLB] = "eitlb", + + /* counts condition */ + [PERF_COUNT_HW_INSTRUCTIONS] = "iall", + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmp", + [PERF_COUNT_ARC_BPOK] = "bpok", /* NP-NT, PT-T, PNT-NT */ + [PERF_COUNT_HW_BRANCH_MISSES] = "bpfail", /* NP-T, PT-NT, PNT-T */ + + [PERF_COUNT_ARC_LDC] = "imemrdc", /* Instr: mem read cached */ + [PERF_COUNT_ARC_STC] = "imemwrc", /* Instr: mem write cached */ + + [PERF_COUNT_ARC_DCLM] = "dclm", /* D-cache Load Miss */ + [PERF_COUNT_ARC_DCSM] = "dcsm", /* D-cache Store Miss */ + [PERF_COUNT_ARC_ICM] = "icm", /* I-cache Miss */ + [PERF_COUNT_ARC_EDTLB] = "edtlb", /* D-TLB Miss */ + [PERF_COUNT_ARC_EITLB] = "eitlb", /* I-TLB Miss */ }; #define C(_x) PERF_COUNT_HW_CACHE_##_x @@ -114,11 +115,11 @@ static const char * const arc_pmu_ev_hw_map[] = { static const unsigned arc_pmu_cache_map[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { [C(L1D)] = { [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_ACCESS)] = PERF_COUNT_ARC_LDC, [C(RESULT_MISS)] = PERF_COUNT_ARC_DCLM, }, [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_ACCESS)] = PERF_COUNT_ARC_STC, [C(RESULT_MISS)] = PERF_COUNT_ARC_DCSM, }, [C(OP_PREFETCH)] = { @@ -128,7 +129,7 @@ static const unsigned arc_pmu_cache_map[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { }, [C(L1I)] = { [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_ACCESS)] = PERF_COUNT_HW_INSTRUCTIONS, [C(RESULT_MISS)] = PERF_COUNT_ARC_ICM, }, [C(OP_WRITE)] = { @@ -156,9 +157,10 @@ static const unsigned arc_pmu_cache_map[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { }, [C(DTLB)] = { [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_ACCESS)] = PERF_COUNT_ARC_LDC, [C(RESULT_MISS)] = PERF_COUNT_ARC_EDTLB, }, + /* DTLB LD/ST Miss not segregated by h/w*/ [C(OP_WRITE)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, diff --git a/arch/arc/include/asm/thread_info.h b/arch/arc/include/asm/thread_info.h index 1163a1838ac1ae4e6ef3220196d7a0cf581a72de..aca0d5a45c7b84c2bdc0f95da1549ad7d3f1af68 100644 --- a/arch/arc/include/asm/thread_info.h +++ b/arch/arc/include/asm/thread_info.h @@ -43,7 +43,6 @@ struct thread_info { int preempt_count; /* 0 => preemptable, <0 => BUG */ struct task_struct *task; /* main task structure */ mm_segment_t addr_limit; /* thread address space */ - struct exec_domain *exec_domain;/* execution domain */ __u32 cpu; /* current CPU */ unsigned long thr_ptr; /* TLS ptr */ }; @@ -56,7 +55,6 @@ struct thread_info { #define INIT_THREAD_INFO(tsk) \ { \ .task = &tsk, \ - .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ .preempt_count = INIT_PREEMPT_COUNT, \ diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c index ae1c485cbc68ea116d84a0625050c0ab80fea89c..fd2ec50102f201254b1e5e51b4bbc7fa93fba95a 100644 --- a/arch/arc/kernel/perf_event.c +++ b/arch/arc/kernel/perf_event.c @@ -16,6 +16,7 @@ #include #include #include +#include struct arc_pmu { struct pmu pmu; @@ -25,6 +26,46 @@ struct arc_pmu { int ev_hw_idx[PERF_COUNT_ARC_HW_MAX]; }; +struct arc_callchain_trace { + int depth; + void *perf_stuff; +}; + +static int callchain_trace(unsigned int addr, void *data) +{ + struct arc_callchain_trace *ctrl = data; + struct perf_callchain_entry *entry = ctrl->perf_stuff; + perf_callchain_store(entry, addr); + + if (ctrl->depth++ < 3) + return 0; + + return -1; +} + +void +perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs) +{ + struct arc_callchain_trace ctrl = { + .depth = 0, + .perf_stuff = entry, + }; + + arc_unwind_core(NULL, regs, callchain_trace, &ctrl); +} + +void +perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) +{ + /* + * User stack can't be unwound trivially with kernel dwarf unwinder + * So for now just record the user PC + */ + perf_callchain_store(entry, instruction_pointer(regs)); +} + +static struct arc_pmu *arc_pmu; + /* read counter #idx; note that counter# != event# on ARC! */ static uint64_t arc_pmu_read_counter(int idx) { @@ -47,7 +88,6 @@ static uint64_t arc_pmu_read_counter(int idx) static void arc_perf_event_update(struct perf_event *event, struct hw_perf_event *hwc, int idx) { - struct arc_pmu *arc_pmu = container_of(event->pmu, struct arc_pmu, pmu); uint64_t prev_raw_count, new_raw_count; int64_t delta; @@ -89,13 +129,16 @@ static int arc_pmu_cache_event(u64 config) if (ret == CACHE_OP_UNSUPPORTED) return -ENOENT; + pr_debug("init cache event: type/op/result %d/%d/%d with h/w %d \'%s\'\n", + cache_type, cache_op, cache_result, ret, + arc_pmu_ev_hw_map[ret]); + return ret; } /* initializes hw_perf_event structure if event is supported */ static int arc_pmu_event_init(struct perf_event *event) { - struct arc_pmu *arc_pmu = container_of(event->pmu, struct arc_pmu, pmu); struct hw_perf_event *hwc = &event->hw; int ret; @@ -106,8 +149,9 @@ static int arc_pmu_event_init(struct perf_event *event) if (arc_pmu->ev_hw_idx[event->attr.config] < 0) return -ENOENT; hwc->config = arc_pmu->ev_hw_idx[event->attr.config]; - pr_debug("initializing event %d with cfg %d\n", - (int) event->attr.config, (int) hwc->config); + pr_debug("init event %d with h/w %d \'%s\'\n", + (int) event->attr.config, (int) hwc->config, + arc_pmu_ev_hw_map[event->attr.config]); return 0; case PERF_TYPE_HW_CACHE: ret = arc_pmu_cache_event(event->attr.config); @@ -183,8 +227,6 @@ static void arc_pmu_stop(struct perf_event *event, int flags) static void arc_pmu_del(struct perf_event *event, int flags) { - struct arc_pmu *arc_pmu = container_of(event->pmu, struct arc_pmu, pmu); - arc_pmu_stop(event, PERF_EF_UPDATE); __clear_bit(event->hw.idx, arc_pmu->used_mask); @@ -194,7 +236,6 @@ static void arc_pmu_del(struct perf_event *event, int flags) /* allocate hardware counter and optionally start counting */ static int arc_pmu_add(struct perf_event *event, int flags) { - struct arc_pmu *arc_pmu = container_of(event->pmu, struct arc_pmu, pmu); struct hw_perf_event *hwc = &event->hw; int idx = hwc->idx; @@ -247,10 +288,7 @@ static int arc_pmu_device_probe(struct platform_device *pdev) BUG_ON(pct_bcr.c > ARC_PMU_MAX_HWEVENTS); READ_BCR(ARC_REG_CC_BUILD, cc_bcr); - if (!cc_bcr.v) { - pr_err("Performance counters exist, but no countable conditions?\n"); - return -ENODEV; - } + BUG_ON(!cc_bcr.v); /* Counters exist but No countable conditions ? */ arc_pmu = devm_kzalloc(&pdev->dev, sizeof(struct arc_pmu), GFP_KERNEL); if (!arc_pmu) @@ -263,19 +301,22 @@ static int arc_pmu_device_probe(struct platform_device *pdev) arc_pmu->n_counters, arc_pmu->counter_size, cc_bcr.c); cc_name.str[8] = 0; - for (i = 0; i < PERF_COUNT_HW_MAX; i++) + for (i = 0; i < PERF_COUNT_ARC_HW_MAX; i++) arc_pmu->ev_hw_idx[i] = -1; + /* loop thru all available h/w condition indexes */ for (j = 0; j < cc_bcr.c; j++) { write_aux_reg(ARC_REG_CC_INDEX, j); cc_name.indiv.word0 = read_aux_reg(ARC_REG_CC_NAME0); cc_name.indiv.word1 = read_aux_reg(ARC_REG_CC_NAME1); + + /* See if it has been mapped to a perf event_id */ for (i = 0; i < ARRAY_SIZE(arc_pmu_ev_hw_map); i++) { if (arc_pmu_ev_hw_map[i] && !strcmp(arc_pmu_ev_hw_map[i], cc_name.str) && strlen(arc_pmu_ev_hw_map[i])) { - pr_debug("mapping %d to idx %d with name %s\n", - i, j, cc_name.str); + pr_debug("mapping perf event %2d to h/w event \'%8s\' (idx %d)\n", + i, cc_name.str, j); arc_pmu->ev_hw_idx[i] = j; } } @@ -302,7 +343,7 @@ static int arc_pmu_device_probe(struct platform_device *pdev) #ifdef CONFIG_OF static const struct of_device_id arc_pmu_match[] = { - { .compatible = "snps,arc700-pmu" }, + { .compatible = "snps,arc700-pct" }, {}, }; MODULE_DEVICE_TABLE(of, arc_pmu_match); @@ -310,7 +351,7 @@ MODULE_DEVICE_TABLE(of, arc_pmu_match); static struct platform_driver arc_pmu_driver = { .driver = { - .name = "arc700-pmu", + .name = "arc700-pct", .of_match_table = of_match_ptr(arc_pmu_match), }, .probe = arc_pmu_device_probe, diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c index 98c00a2d4dd9a57f1c503ac2ebb6d63a3f1a76b4..e095c557afdddc3aefce744c97d5d7bb20a6f2e6 100644 --- a/arch/arc/kernel/process.c +++ b/arch/arc/kernel/process.c @@ -49,7 +49,10 @@ void arch_cpu_idle(void) asmlinkage void ret_from_fork(void); -/* Layout of Child kernel mode stack as setup at the end of this function is +/* + * Copy architecture-specific thread state + * + * Layout of Child kernel mode stack as setup at the end of this function is * * | ... | * | ... | @@ -81,7 +84,7 @@ asmlinkage void ret_from_fork(void); * ------------------ <===== END of PAGE */ int copy_thread(unsigned long clone_flags, - unsigned long usp, unsigned long arg, + unsigned long usp, unsigned long kthread_arg, struct task_struct *p) { struct pt_regs *c_regs; /* child's pt_regs */ @@ -112,7 +115,7 @@ int copy_thread(unsigned long clone_flags, if (unlikely(p->flags & PF_KTHREAD)) { memset(c_regs, 0, sizeof(struct pt_regs)); - c_callee->r13 = arg; /* argument to kernel thread */ + c_callee->r13 = kthread_arg; c_callee->r14 = usp; /* function */ return 0; @@ -155,8 +158,6 @@ int copy_thread(unsigned long clone_flags, */ void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long usp) { - set_fs(USER_DS); /* user space */ - regs->sp = usp; regs->ret = pc; diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index 900f68a7008832017296f3dc641e70203358c5d6..1d167c6df8caae8a48d59b2aa08539e9f20b51d6 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -120,7 +120,10 @@ static void read_arc_build_cfg_regs(void) READ_BCR(ARC_REG_SMART_BCR, bcr); cpu->extn.smart = bcr.ver ? 1 : 0; - cpu->extn.debug = cpu->extn.ap | cpu->extn.smart; + READ_BCR(ARC_REG_RTT_BCR, bcr); + cpu->extn.rtt = bcr.ver ? 1 : 0; + + cpu->extn.debug = cpu->extn.ap | cpu->extn.smart | cpu->extn.rtt; } static const struct cpuinfo_data arc_cpu_tbl[] = { diff --git a/arch/arc/kernel/signal.c b/arch/arc/kernel/signal.c index edda76fae83f25219bd74c5487a458e29c765373..2251fb4bbfd76c4e8ab67477302d1e215017e73d 100644 --- a/arch/arc/kernel/signal.c +++ b/arch/arc/kernel/signal.c @@ -171,18 +171,6 @@ static inline void __user *get_sigframe(struct ksignal *ksig, return frame; } -/* - * translate the signal - */ -static inline int map_sig(int sig) -{ - struct thread_info *thread = current_thread_info(); - if (thread->exec_domain && thread->exec_domain->signal_invmap - && sig < 32) - sig = thread->exec_domain->signal_invmap[sig]; - return sig; -} - static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs) { @@ -231,7 +219,7 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs) return err; /* #1 arg to the user Signal handler */ - regs->r0 = map_sig(ksig->sig); + regs->r0 = ksig->sig; /* setup PC of user space signal handler */ regs->ret = (unsigned long)ksig->ka.sa.sa_handler; diff --git a/arch/arc/kernel/traps.c b/arch/arc/kernel/traps.c index 3eadfdabc32295008aa899d74dab4057173ea19e..c927aa84e652e0ac80d37a632c60e1c0201b6d0d 100644 --- a/arch/arc/kernel/traps.c +++ b/arch/arc/kernel/traps.c @@ -42,7 +42,7 @@ void die(const char *str, struct pt_regs *regs, unsigned long address) * -for kernel, chk if due to copy_(to|from)_user, otherwise die() */ static noinline int -handle_exception(const char *str, struct pt_regs *regs, siginfo_t *info) +unhandled_exception(const char *str, struct pt_regs *regs, siginfo_t *info) { if (user_mode(regs)) { struct task_struct *tsk = current; @@ -71,7 +71,7 @@ int name(unsigned long address, struct pt_regs *regs) \ .si_code = sicode, \ .si_addr = (void __user *)address, \ }; \ - return handle_exception(str, regs, &info);\ + return unhandled_exception(str, regs, &info);\ } /* diff --git a/arch/arc/kernel/troubleshoot.c b/arch/arc/kernel/troubleshoot.c index 1badf9b84b511076e780b9356ce9ce9e9960ef5d..e00a01879025ea4d55be8d404b80cf2d2e53c22b 100644 --- a/arch/arc/kernel/troubleshoot.c +++ b/arch/arc/kernel/troubleshoot.c @@ -52,7 +52,7 @@ static void show_callee_regs(struct callee_regs *cregs) print_reg_file(&(cregs->r13), 13); } -void print_task_path_n_nm(struct task_struct *tsk, char *buf) +static void print_task_path_n_nm(struct task_struct *tsk, char *buf) { struct path path; char *path_nm = NULL; @@ -77,7 +77,6 @@ void print_task_path_n_nm(struct task_struct *tsk, char *buf) done: pr_info("Path: %s\n", path_nm); } -EXPORT_SYMBOL(print_task_path_n_nm); static void show_faulting_vma(unsigned long address, char *buf) { diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c index e550b117ec4ffe4ccf3f79e4763fc511e5c9d7e9..93c6ea52b6719e4e238d6076fda6c3b981ac48fe 100644 --- a/arch/arc/kernel/unwind.c +++ b/arch/arc/kernel/unwind.c @@ -841,7 +841,7 @@ static int processCFI(const u8 *start, const u8 *end, unsigned long targetLoc, break; case DW_CFA_GNU_window_save: default: - unw_debug("UNKNOW OPCODE 0x%x\n", opcode); + unw_debug("UNKNOWN OPCODE 0x%x\n", opcode); result = 0; break; } diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c index 8c3a3e02ba92c8adbc368dba9a3cd283f32c3e72..12b2100db0731a2a9ce99ce1398ae4599eaca87a 100644 --- a/arch/arc/mm/cache_arc700.c +++ b/arch/arc/mm/cache_arc700.c @@ -266,7 +266,7 @@ static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr, * Machine specific helpers for Entire D-Cache or Per Line ops */ -static unsigned int __before_dc_op(const int op) +static inline unsigned int __before_dc_op(const int op) { unsigned int reg = reg; @@ -284,7 +284,7 @@ static unsigned int __before_dc_op(const int op) return reg; } -static void __after_dc_op(const int op, unsigned int reg) +static inline void __after_dc_op(const int op, unsigned int reg) { if (op & OP_FLUSH) /* flush / flush-n-inv both wait */ while (read_aux_reg(ARC_REG_DC_CTRL) & DC_CTRL_FLUSH_STATUS); diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c index 523412369f70a813e0d250013639cae6cb4c1447..d44eedd8c3220e6923b26ea8d10fc6f0f84005f3 100644 --- a/arch/arc/mm/init.c +++ b/arch/arc/mm/init.c @@ -71,7 +71,7 @@ early_param("initrd", early_initrd); */ void __init setup_arch_memory(void) { - unsigned long zones_size[MAX_NR_ZONES] = { 0, 0 }; + unsigned long zones_size[MAX_NR_ZONES]; unsigned long end_mem = CONFIG_LINUX_LINK_BASE + arc_mem_sz; init_mm.start_code = (unsigned long)_text; @@ -90,7 +90,7 @@ void __init setup_arch_memory(void) /*------------- externs in mm need setting up ---------------*/ /* first page of system - kernel .vector starts here */ - min_low_pfn = PFN_DOWN(CONFIG_LINUX_LINK_BASE); + min_low_pfn = ARCH_PFN_OFFSET; /* Last usable page of low mem (no HIGHMEM yet for ARC port) */ max_low_pfn = max_pfn = PFN_DOWN(end_mem); @@ -111,7 +111,7 @@ void __init setup_arch_memory(void) /*-------------- node setup --------------------------------*/ memset(zones_size, 0, sizeof(zones_size)); - zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn; + zones_size[ZONE_NORMAL] = max_mapnr; /* * We can't use the helper free_area_init(zones[]) because it uses @@ -123,6 +123,8 @@ void __init setup_arch_memory(void) zones_size, /* num pages per zone */ min_low_pfn, /* first pfn of node */ NULL); /* NO holes */ + + high_memory = (void *)end_mem; } /* @@ -133,7 +135,6 @@ void __init setup_arch_memory(void) */ void __init mem_init(void) { - high_memory = (void *)(CONFIG_LINUX_LINK_BASE + arc_mem_sz); free_all_bootmem(); mem_init_print_info(NULL); } diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index cf4c0c99aa253f3f69ecc08a07f0c5a695e63640..45df48ba0b128dd408e2275687b1757c87e0ca74 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1,8 +1,8 @@ config ARM bool default y - select ARCH_BINFMT_ELF_RANDOMIZE_PIE select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE + select ARCH_HAS_ELF_RANDOMIZE select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_HAVE_CUSTOM_GPIO_H select ARCH_HAS_GCOV_PROFILE_ALL @@ -21,6 +21,7 @@ config ARM select GENERIC_IDLE_POLL_SETUP select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW + select GENERIC_IRQ_SHOW_LEVEL select GENERIC_PCI_IOMAP select GENERIC_SCHED_CLOCK select GENERIC_SMP_IDLE_THREAD @@ -286,6 +287,11 @@ config GENERIC_BUG def_bool y depends on BUG +config PGTABLE_LEVELS + int + default 3 if ARM_LPAE + default 2 + source "init/Kconfig" source "kernel/Kconfig.freezer" @@ -356,19 +362,6 @@ config ARCH_VERSATILE help This enables support for ARM Ltd Versatile board. -config ARCH_AT91 - bool "Atmel AT91" - select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP - select IRQ_DOMAIN - select NEED_MACH_IO_H if PCCARD - select PINCTRL - select PINCTRL_AT91 - select USE_OF - help - This enables support for systems based on Atmel - AT91RM9200, AT91SAM9 and SAMA5 processors. - config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" select ARCH_REQUIRE_GPIOLIB @@ -626,18 +619,6 @@ config ARCH_PXA help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. -config ARCH_MSM - bool "Qualcomm MSM (non-multiplatform)" - select ARCH_REQUIRE_GPIOLIB - select COMMON_CLK - select GENERIC_CLOCKEVENTS - help - Support for Qualcomm MSM/QSD based systems. This runs on the - apps processor of the MSM/QSD and depends on a shared memory - interface to the modem processor which runs the baseband - stack and controls some vital subsystems - (clock and power control, etc). - config ARCH_SHMOBILE_LEGACY bool "Renesas ARM SoCs (non-multiplatform)" select ARCH_SHMOBILE @@ -647,7 +628,6 @@ config ARCH_SHMOBILE_LEGACY select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_MACH_CLKDEV select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 select MULTI_IRQ_HANDLER @@ -845,6 +825,8 @@ config ARCH_VIRT # source "arch/arm/mach-mvebu/Kconfig" +source "arch/arm/mach-alpine/Kconfig" + source "arch/arm/mach-asm9260/Kconfig" source "arch/arm/mach-at91/Kconfig" @@ -891,8 +873,6 @@ source "arch/arm/mach-ks8695/Kconfig" source "arch/arm/mach-meson/Kconfig" -source "arch/arm/mach-msm/Kconfig" - source "arch/arm/mach-moxart/Kconfig" source "arch/arm/mach-mv78xx0/Kconfig" @@ -1058,7 +1038,7 @@ config ARM_ERRATA_430973 depends on CPU_V7 help This option enables the workaround for the 430973 Cortex-A8 - (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb + r1p* erratum. If a code sequence containing an ARM/Thumb interworking branch is replaced with another code sequence at the same virtual address, whether due to self-modifying code or virtual to physical address re-mapping, Cortex-A8 does not recover from the @@ -1127,6 +1107,7 @@ config ARM_ERRATA_742231 config ARM_ERRATA_643719 bool "ARM errata: LoUIS bit field in CLIDR register is incorrect" depends on CPU_V7 && SMP + default y help This option enables the workaround for the 643719 Cortex-A9 (prior to r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR @@ -1344,7 +1325,7 @@ config SMP If you don't know what to do here, say N. config SMP_ON_UP - bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)" + bool "Allow booting SMP kernel on uniprocessor systems" depends on SMP && !XIP_KERNEL && MMU default y help @@ -1516,7 +1497,7 @@ config HZ_FIXED int default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \ ARCH_S5PV210 || ARCH_EXYNOS4 - default AT91_TIMER_HZ if ARCH_AT91 + default 128 if SOC_AT91RM9200 default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY default 0 @@ -1849,35 +1830,6 @@ config ZBOOT_ROM Say Y here if you intend to execute your compressed kernel image (zImage) directly from ROM or flash. If unsure, say N. -choice - prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)" - depends on ZBOOT_ROM && ARCH_SH7372 - default ZBOOT_ROM_NONE - help - Include experimental SD/MMC loading code in the ROM-able zImage. - With this enabled it is possible to write the ROM-able zImage - kernel image to an MMC or SD card and boot the kernel straight - from the reset vector. At reset the processor Mask ROM will load - the first part of the ROM-able zImage which in turn loads the - rest the kernel image to RAM. - -config ZBOOT_ROM_NONE - bool "No SD/MMC loader in zImage (EXPERIMENTAL)" - help - Do not load image from SD or MMC - -config ZBOOT_ROM_MMCIF - bool "Include MMCIF loader in zImage (EXPERIMENTAL)" - help - Load image from MMCIF hardware block. - -config ZBOOT_ROM_SH_MOBILE_SDHI - bool "Include SuperH Mobile SDHI loader in zImage (EXPERIMENTAL)" - help - Load image from SDHI hardware block - -endchoice - config ARM_APPENDED_DTB bool "Use appended device tree blob to zImage (EXPERIMENTAL)" depends on OF @@ -2126,16 +2078,6 @@ menu "Userspace binary formats" source "fs/Kconfig.binfmt" -config ARTHUR - tristate "RISC OS personality" - depends on !AEABI - help - Say Y here to include the kernel code necessary if you want to run - Acorn RISC OS/Arthur binaries under Linux. This code is still very - experimental; if this sounds frightening, say N and sleep in peace. - You can also say M here to compile this support as a module (which - will be called arthur). - endmenu menu "Power management options" @@ -2161,6 +2103,8 @@ source "net/Kconfig" source "drivers/Kconfig" +source "drivers/firmware/Kconfig" + source "fs/Kconfig" source "arch/arm/Kconfig.debug" @@ -2168,6 +2112,9 @@ source "arch/arm/Kconfig.debug" source "security/Kconfig" source "crypto/Kconfig" +if CRYPTO +source "arch/arm/crypto/Kconfig" +endif source "lib/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 970de7518341d2382ee86a8c9a0cefde2bca2739..0c12ffb155a23c604c9bbb9b849a913d359e34ae 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -93,6 +93,14 @@ choice prompt "Kernel low-level debugging port" depends on DEBUG_LL + config DEBUG_ALPINE_UART0 + bool "Kernel low-level debugging messages via Alpine UART0" + depends on ARCH_ALPINE + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Alpine based platforms. + config DEBUG_ASM9260_UART bool "Kernel low-level debugging via asm9260 UART" depends on MACH_ASM9260 @@ -448,25 +456,6 @@ choice Say Y here if you want kernel low-level debugging support on MMP UART3. - config DEBUG_MSM_UART - bool "Kernel low-level debugging messages via MSM UART" - depends on ARCH_MSM - help - Say Y here if you want the debug print routines to direct - their output to the serial port on MSM devices. - - ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT # - MSM7X00A, QSD8X50 0xa9a00000 0xe1000000 UART1 - MSM7X00A, QSD8X50 0xa9b00000 0xe1000000 UART2 - MSM7X00A, QSD8X50 0xa9c00000 0xe1000000 UART3 - - MSM7X30 0xaca00000 0xe1000000 UART1 - MSM7X30 0xacb00000 0xe1000000 UART2 - MSM7X30 0xacc00000 0xe1000000 UART3 - - Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration - options based on your needs. - config DEBUG_QCOM_UARTDM bool "Kernel low-level debugging messages via QCOM UARTDM" depends on ARCH_QCOM @@ -806,7 +795,7 @@ choice via SCIF2 on Renesas R-Car H1 (R8A7779). config DEBUG_RCAR_GEN2_SCIF0 - bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793)" + bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793" depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7793 help Say Y here if you want kernel low-level debugging support @@ -821,12 +810,11 @@ choice via SCIF2 on Renesas R-Car E2 (R8A7794). config DEBUG_RMOBILE_SCIFA0 - bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4/SH7372" - depends on ARCH_R8A73A4 || ARCH_SH7372 + bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4" + depends on ARCH_R8A73A4 help Say Y here if you want kernel low-level debugging support - via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4) or SH-Mobile - AP4 (SH7372). + via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4). config DEBUG_RMOBILE_SCIFA1 bool "Kernel low-level debugging messages via SCIFA1 on R8A7740" @@ -1295,7 +1283,7 @@ config DEBUG_LL_INCLUDE DEBUG_IMX6SL_UART || \ DEBUG_IMX6SX_UART default "debug/ks8695.S" if DEBUG_KS8695_UART - default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM + default "debug/msm.S" if DEBUG_QCOM_UARTDM default "debug/netx.S" if DEBUG_NETX_UART default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2 @@ -1388,7 +1376,6 @@ config DEBUG_UART_PHYS default 0x80230000 if DEBUG_PICOXCELL_UART default 0x808c0000 if ARCH_EP93XX default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART - default 0xa9a00000 if DEBUG_MSM_UART default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1 default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX default 0xc0013000 if DEBUG_U300_UART @@ -1417,6 +1404,7 @@ config DEBUG_UART_PHYS default 0xf8b00000 if DEBUG_HIX5HD2_UART default 0xf991e000 if DEBUG_QCOM_UARTDM default 0xfcb00000 if DEBUG_HI3620_UART + default 0xfd883000 if DEBUG_ALPINE_UART0 default 0xfe800000 if ARCH_IOP32X default 0xff690000 if DEBUG_RK32_UART2 default 0xffc02000 if DEBUG_SOCFPGA_UART @@ -1433,7 +1421,7 @@ config DEBUG_UART_PHYS DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_LL_UART_EFM32 || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ - DEBUG_MSM_UART || DEBUG_NETX_UART || \ + DEBUG_NETX_UART || \ DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \ DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \ DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \ @@ -1446,7 +1434,6 @@ config DEBUG_UART_VIRT hex "Virtual base address of debug UART" default 0xe0000a00 if DEBUG_NETX_UART default 0xe0010fe0 if ARCH_RPC - default 0xe1000000 if DEBUG_MSM_UART default 0xf0000be0 if ARCH_EBSA110 default 0xf0010000 if DEBUG_ASM9260_UART default 0xf01fb000 if DEBUG_NOMADIK_UART @@ -1483,6 +1470,7 @@ config DEBUG_UART_VIRT default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX default 0xfd000000 if ARCH_SPEAR13XX default 0xfd012000 if ARCH_MV78XX0 + default 0xfd883000 if DEBUG_ALPINE_UART0 default 0xfde12000 if ARCH_DOVE default 0xfe012000 if ARCH_ORION5X default 0xf31004c0 if DEBUG_MESON_UARTAO @@ -1526,7 +1514,7 @@ config DEBUG_UART_VIRT default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ - DEBUG_MSM_UART || DEBUG_NETX_UART || \ + DEBUG_NETX_UART || \ DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \ DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 @@ -1543,7 +1531,7 @@ config DEBUG_UART_8250_WORD depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 depends on DEBUG_UART_8250_SHIFT >= 2 default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \ - ARCH_KEYSTONE || \ + ARCH_KEYSTONE || DEBUG_ALPINE_UART0 || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ DEBUG_DAVINCI_DA8XX_UART2 || \ DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \ @@ -1556,7 +1544,7 @@ config DEBUG_UART_8250_FLOW_CONTROL config DEBUG_UNCOMPRESS bool - depends on ARCH_MULTIPLATFORM || ARCH_MSM || PLAT_SAMSUNG + depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ (!DEBUG_TEGRA_UART || !ZBOOT_ROM) help @@ -1573,7 +1561,8 @@ config DEBUG_UNCOMPRESS config UNCOMPRESS_INCLUDE string default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \ - PLAT_SAMSUNG || ARCH_EFM32 + PLAT_SAMSUNG || ARCH_EFM32 || \ + ARCH_SHMOBILE_LEGACY default "mach/uncompress.h" config EARLY_PRINTK @@ -1610,59 +1599,6 @@ config DEBUG_SET_MODULE_RONX against certain classes of kernel exploits. If in doubt, say "N". -menuconfig CORESIGHT - bool "CoreSight Tracing Support" - select ARM_AMBA - help - This framework provides a kernel interface for the CoreSight debug - and trace drivers to register themselves with. It's intended to build - a topological view of the CoreSight components based on a DT - specification and configure the right serie of components when a - trace source gets enabled. - -if CORESIGHT -config CORESIGHT_LINKS_AND_SINKS - bool "CoreSight Link and Sink drivers" - help - This enables support for CoreSight link and sink drivers that are - responsible for transporting and collecting the trace data - respectively. Link and sinks are dynamically aggregated with a trace - entity at run time to form a complete trace path. - -config CORESIGHT_LINK_AND_SINK_TMC - bool "Coresight generic TMC driver" - depends on CORESIGHT_LINKS_AND_SINKS - help - This enables support for the Trace Memory Controller driver. Depending - on its configuration the device can act as a link (embedded trace router - - ETR) or sink (embedded trace FIFO). The driver complies with the - generic implementation of the component without special enhancement or - added features. - -config CORESIGHT_SINK_TPIU - bool "Coresight generic TPIU driver" - depends on CORESIGHT_LINKS_AND_SINKS - help - This enables support for the Trace Port Interface Unit driver, responsible - for bridging the gap between the on-chip coresight components and a trace - port collection engine, typically connected to an external host for use - case capturing more traces than the on-board coresight memory can handle. - -config CORESIGHT_SINK_ETBV10 - bool "Coresight ETBv1.0 driver" - depends on CORESIGHT_LINKS_AND_SINKS - help - This enables support for the Embedded Trace Buffer version 1.0 driver - that complies with the generic implementation of the component without - special enhancement or added features. +source "drivers/hwtracing/coresight/Kconfig" -config CORESIGHT_SOURCE_ETM3X - bool "CoreSight Embedded Trace Macrocell 3.x driver" - select CORESIGHT_LINKS_AND_SINKS - help - This driver provides support for processor ETM3.x and PTM1.x modules, - which allows tracing the instructions that a processor is executing - This is primarily useful for instruction level tracing. Depending - the ETM version data tracing may also be available. -endif endmenu diff --git a/arch/arm/Makefile b/arch/arm/Makefile index eb7bb511f853d975d67c0ee26c1167b2d5054279..985227cbbd1bd797546c36099dcd7cc17c0efc4f 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -13,7 +13,7 @@ # Ensure linker flags are correct LDFLAGS := -LDFLAGS_vmlinux :=-p --no-undefined -X +LDFLAGS_vmlinux :=-p --no-undefined -X --pic-veneer ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) LDFLAGS_vmlinux += --be8 LDFLAGS_MODULE += --be8 @@ -136,13 +136,13 @@ textofs-$(CONFIG_PM_H1940) := 0x00108000 ifeq ($(CONFIG_ARCH_SA1100),y) textofs-$(CONFIG_SA1111) := 0x00208000 endif -textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000 textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000 # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. +machine-$(CONFIG_ARCH_ALPINE) += alpine machine-$(CONFIG_ARCH_AT91) += at91 machine-$(CONFIG_ARCH_AXXIA) += axxia machine-$(CONFIG_ARCH_BCM) += bcm @@ -171,7 +171,6 @@ machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx machine-$(CONFIG_ARCH_MESON) += meson machine-$(CONFIG_ARCH_MMP) += mmp machine-$(CONFIG_ARCH_MOXART) += moxart -machine-$(CONFIG_ARCH_MSM) += msm machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0 machine-$(CONFIG_ARCH_MVEBU) += mvebu machine-$(CONFIG_ARCH_MXC) += imx @@ -264,6 +263,7 @@ core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ) core-$(CONFIG_VFP) += arch/arm/vfp/ core-$(CONFIG_XEN) += arch/arm/xen/ core-$(CONFIG_KVM_ARM_HOST) += arch/arm/kvm/ +core-$(CONFIG_VDSO) += arch/arm/vdso/ # If we have a machine-specific directory, then include it in the build. core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/ @@ -321,6 +321,12 @@ dtbs: prepare scripts dtbs_install: $(Q)$(MAKE) $(dtbinst)=$(boot)/dts +PHONY += vdso_install +vdso_install: +ifeq ($(CONFIG_VDSO),y) + $(Q)$(MAKE) $(build)=arch/arm/vdso $@ +endif + # We use MRPROPER_FILES and CLEAN_FILES now archclean: $(Q)$(MAKE) $(clean)=$(boot) @@ -345,4 +351,5 @@ define archhelp echo ' Install using (your) ~/bin/$(INSTALLKERNEL) or' echo ' (distribution) /sbin/$(INSTALLKERNEL) or' echo ' install to $$(INSTALL_PATH) and run lilo' + echo ' vdso_install - Install unstripped vdso.so to $$(INSTALL_MOD_PATH)/vdso' endef diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index ec2f8065f955c5c31a69888bf261c58ea56ffb6d..9eca7aee927f3081975d7372a66a358565c33c56 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -12,7 +12,7 @@ # ifneq ($(MACHINE),) -include $(srctree)/$(MACHINE)/Makefile.boot +include $(MACHINE)/Makefile.boot endif # Note: the following conditions must always be true: diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 3ea230aa94b7e061f53b2b4cea9f867bb6c6aa17..6e1fb2b2ecc750ee4898240d1421d985888cc096 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -6,21 +6,6 @@ OBJS = -# Ensure that MMCIF loader code appears early in the image -# to minimise that number of bocks that have to be read in -# order to load it. -ifeq ($(CONFIG_ZBOOT_ROM_MMCIF),y) -OBJS += mmcif-sh7372.o -endif - -# Ensure that SDHI loader code appears early in the image -# to minimise that number of bocks that have to be read in -# order to load it. -ifeq ($(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI),y) -OBJS += sdhi-shmobile.o -OBJS += sdhi-sh7372.o -endif - AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET) HEAD = head.o OBJS += misc.o decompress.o diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S index e7f80928949c8da53a13b2bca5ace2928c1ba4c2..22a75259faa32996dffa65843c8b85f29c7d7357 100644 --- a/arch/arm/boot/compressed/head-shmobile.S +++ b/arch/arm/boot/compressed/head-shmobile.S @@ -25,36 +25,6 @@ /* load board-specific initialization code */ #include -#if defined(CONFIG_ZBOOT_ROM_MMCIF) || defined(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI) - /* Load image from MMC/SD */ - adr sp, __tmp_stack + 256 - ldr r0, __image_start - ldr r1, __image_end - subs r1, r1, r0 - ldr r0, __load_base - bl mmc_loader - - /* Jump to loaded code */ - ldr r0, __loaded - ldr r1, __image_start - sub r0, r0, r1 - ldr r1, __load_base - add pc, r0, r1 - -__image_start: - .long _start -__image_end: - .long _got_end -__load_base: - .long MEMORY_START + 0x02000000 @ Load at 32Mb into SDRAM -__loaded: - .long __continue - .align -__tmp_stack: - .space 256 -__continue: -#endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */ - adr r0, dtb_info ldmia r0, {r1, r3, r4, r5, r7} diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index c41a793b519c2817cfc5a48bee38235812874fc2..2c45b5709fa494828560891cde6e64926f1e1581 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -10,8 +10,11 @@ */ #include #include +#include + + AR_CLASS( .arch armv7-a ) + M_CLASS( .arch armv7-m ) - .arch armv7-a /* * Debugging stuff * @@ -114,7 +117,12 @@ * sort out different calling conventions */ .align - .arm @ Always enter in ARM state + /* + * Always enter in ARM state for CPUs that support the ARM ISA. + * As of today (2014) that's exactly the members of the A and R + * classes. + */ + AR_CLASS( .arm ) start: .type start,#function .rept 7 @@ -132,14 +140,15 @@ start: THUMB( .thumb ) 1: - ARM_BE8( setend be ) @ go BE8 if compiled for BE8 - mrs r9, cpsr + ARM_BE8( setend be ) @ go BE8 if compiled for BE8 + AR_CLASS( mrs r9, cpsr ) #ifdef CONFIG_ARM_VIRT_EXT bl __hyp_stub_install @ get into SVC mode, reversibly #endif mov r7, r1 @ save architecture ID mov r8, r2 @ save atags pointer +#ifndef CONFIG_CPU_V7M /* * Booting from Angel - need to enter SVC mode and disable * FIQs/IRQs (numeric definitions from angel arm.h source). @@ -155,6 +164,7 @@ not_angel: safe_svcmode_maskall r0 msr spsr_cxsf, r9 @ Save the CPU boot mode in @ SPSR +#endif /* * Note that some cache flushing and other stuff may * be needed here - is there an Angel SWI call for this? @@ -168,9 +178,26 @@ not_angel: .text #ifdef CONFIG_AUTO_ZRELADDR - @ determine final kernel image address + /* + * Find the start of physical memory. As we are executing + * without the MMU on, we are in the physical address space. + * We just need to get rid of any offset by aligning the + * address. + * + * This alignment is a balance between the requirements of + * different platforms - we have chosen 128MB to allow + * platforms which align the start of their physical memory + * to 128MB to use this feature, while allowing the zImage + * to be placed within the first 128MB of memory on other + * platforms. Increasing the alignment means we place + * stricter alignment requirements on the start of physical + * memory, but relaxing it means that we break people who + * are already placing their zImage in (eg) the top 64MB + * of this range. + */ mov r4, pc and r4, r4, #0xf8000000 + /* Determine final kernel image address. */ add r4, r4, #TEXT_OFFSET #else ldr r4, =zreladdr @@ -810,6 +837,16 @@ __common_mmu_cache_on: call_cache_fn: adr r12, proc_types #ifdef CONFIG_CPU_CP15 mrc p15, 0, r9, c0, c0 @ get processor ID +#elif defined(CONFIG_CPU_V7M) + /* + * On v7-M the processor id is located in the V7M_SCB_CPUID + * register, but as cache handling is IMPLEMENTATION DEFINED on + * v7-M (if existant at all) we just return early here. + * If V7M_SCB_CPUID were used the cpu ID functions (i.e. + * __armv7_mmu_cache_{on,off,flush}) would be selected which + * use cp15 registers that are not implemented on v7-M. + */ + bx lr #else ldr r9, =CONFIG_PROCESSOR_ID #endif @@ -1310,8 +1347,9 @@ __hyp_reentry_vectors: __enter_kernel: mov r0, #0 @ must be 0 - ARM( mov pc, r4 ) @ call kernel - THUMB( bx r4 ) @ entry point is always ARM + ARM( mov pc, r4 ) @ call kernel + M_CLASS( add r4, r4, #1 ) @ enter in Thumb mode for M class + THUMB( bx r4 ) @ entry point is always ARM for A/R classes reloc_code_end: diff --git a/arch/arm/boot/compressed/mmcif-sh7372.c b/arch/arm/boot/compressed/mmcif-sh7372.c deleted file mode 100644 index 672ae95db5c3177aedc1dfdb3825a490b31e9fc2..0000000000000000000000000000000000000000 --- a/arch/arm/boot/compressed/mmcif-sh7372.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * sh7372 MMCIF loader - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2010 Simon Horman - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include -#include -#include - -#define MMCIF_BASE (void __iomem *)0xe6bd0000 - -#define PORT84CR (void __iomem *)0xe6050054 -#define PORT85CR (void __iomem *)0xe6050055 -#define PORT86CR (void __iomem *)0xe6050056 -#define PORT87CR (void __iomem *)0xe6050057 -#define PORT88CR (void __iomem *)0xe6050058 -#define PORT89CR (void __iomem *)0xe6050059 -#define PORT90CR (void __iomem *)0xe605005a -#define PORT91CR (void __iomem *)0xe605005b -#define PORT92CR (void __iomem *)0xe605005c -#define PORT99CR (void __iomem *)0xe6050063 - -#define SMSTPCR3 (void __iomem *)0xe615013c - -/* SH7372 specific MMCIF loader - * - * loads the zImage from an MMC card starting from block 1. - * - * The image must be start with a vrl4 header and - * the zImage must start at offset 512 of the image. That is, - * at block 2 (=byte 1024) on the media - * - * Use the following line to write the vrl4 formated zImage - * to an MMC card - * # dd if=vrl4.out of=/dev/sdx bs=512 seek=1 - */ -asmlinkage void mmc_loader(unsigned char *buf, unsigned long len) -{ - mmc_init_progress(); - mmc_update_progress(MMC_PROGRESS_ENTER); - - /* Initialise MMC - * registers: PORT84CR-PORT92CR - * (MMCD0_0-MMCD0_7,MMCCMD0 Control) - * value: 0x04 - select function 4 - */ - __raw_writeb(0x04, PORT84CR); - __raw_writeb(0x04, PORT85CR); - __raw_writeb(0x04, PORT86CR); - __raw_writeb(0x04, PORT87CR); - __raw_writeb(0x04, PORT88CR); - __raw_writeb(0x04, PORT89CR); - __raw_writeb(0x04, PORT90CR); - __raw_writeb(0x04, PORT91CR); - __raw_writeb(0x04, PORT92CR); - - /* Initialise MMC - * registers: PORT99CR (MMCCLK0 Control) - * value: 0x10 | 0x04 - enable output | select function 4 - */ - __raw_writeb(0x14, PORT99CR); - - /* Enable clock to MMC hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 12), SMSTPCR3); - - mmc_update_progress(MMC_PROGRESS_INIT); - - /* setup MMCIF hardware */ - sh_mmcif_boot_init(MMCIF_BASE); - - mmc_update_progress(MMC_PROGRESS_LOAD); - - /* load kernel via MMCIF interface */ - sh_mmcif_boot_do_read(MMCIF_BASE, 2, /* Kernel is at block 2 */ - (len + SH_MMCIF_BBS - 1) / SH_MMCIF_BBS, buf); - - - /* Disable clock to MMC hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) | (1 << 12), SMSTPCR3); - - mmc_update_progress(MMC_PROGRESS_DONE); -} diff --git a/arch/arm/boot/compressed/sdhi-sh7372.c b/arch/arm/boot/compressed/sdhi-sh7372.c deleted file mode 100644 index d279294f238116fa4fbd3c71931149528516b483..0000000000000000000000000000000000000000 --- a/arch/arm/boot/compressed/sdhi-sh7372.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * SuperH Mobile SDHI - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2010 Kuninori Morimoto - * Copyright (C) 2010 Simon Horman - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Parts inspired by u-boot - */ - -#include -#include -#include -#include - -#include "sdhi-shmobile.h" - -#define PORT179CR 0xe60520b3 -#define PORT180CR 0xe60520b4 -#define PORT181CR 0xe60520b5 -#define PORT182CR 0xe60520b6 -#define PORT183CR 0xe60520b7 -#define PORT184CR 0xe60520b8 - -#define SMSTPCR3 0xe615013c - -#define CR_INPUT_ENABLE 0x10 -#define CR_FUNCTION1 0x01 - -#define SDHI1_BASE (void __iomem *)0xe6860000 -#define SDHI_BASE SDHI1_BASE - -/* SuperH Mobile SDHI loader - * - * loads the zImage from an SD card starting from block 0 - * on physical partition 1 - * - * The image must be start with a vrl4 header and - * the zImage must start at offset 512 of the image. That is, - * at block 1 (=byte 512) of physical partition 1 - * - * Use the following line to write the vrl4 formated zImage - * to an SD card - * # dd if=vrl4.out of=/dev/sdx bs=512 - */ -asmlinkage void mmc_loader(unsigned short *buf, unsigned long len) -{ - int high_capacity; - - mmc_init_progress(); - - mmc_update_progress(MMC_PROGRESS_ENTER); - /* Initialise SDHI1 */ - /* PORT184CR: GPIO_FN_SDHICMD1 Control */ - __raw_writeb(CR_FUNCTION1, PORT184CR); - /* PORT179CR: GPIO_FN_SDHICLK1 Control */ - __raw_writeb(CR_INPUT_ENABLE|CR_FUNCTION1, PORT179CR); - /* PORT181CR: GPIO_FN_SDHID1_3 Control */ - __raw_writeb(CR_FUNCTION1, PORT183CR); - /* PORT182CR: GPIO_FN_SDHID1_2 Control */ - __raw_writeb(CR_FUNCTION1, PORT182CR); - /* PORT183CR: GPIO_FN_SDHID1_1 Control */ - __raw_writeb(CR_FUNCTION1, PORT181CR); - /* PORT180CR: GPIO_FN_SDHID1_0 Control */ - __raw_writeb(CR_FUNCTION1, PORT180CR); - - /* Enable clock to SDHI1 hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 13), SMSTPCR3); - - /* setup SDHI hardware */ - mmc_update_progress(MMC_PROGRESS_INIT); - high_capacity = sdhi_boot_init(SDHI_BASE); - if (high_capacity < 0) - goto err; - - mmc_update_progress(MMC_PROGRESS_LOAD); - /* load kernel */ - if (sdhi_boot_do_read(SDHI_BASE, high_capacity, - 0, /* Kernel is at block 1 */ - (len + TMIO_BBS - 1) / TMIO_BBS, buf)) - goto err; - - /* Disable clock to SDHI1 hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) | (1 << 13), SMSTPCR3); - - mmc_update_progress(MMC_PROGRESS_DONE); - - return; -err: - for(;;); -} diff --git a/arch/arm/boot/compressed/sdhi-shmobile.c b/arch/arm/boot/compressed/sdhi-shmobile.c deleted file mode 100644 index bd3d46980955bfff687b9d61d52ed1413f313cad..0000000000000000000000000000000000000000 --- a/arch/arm/boot/compressed/sdhi-shmobile.c +++ /dev/null @@ -1,449 +0,0 @@ -/* - * SuperH Mobile SDHI - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2010 Kuninori Morimoto - * Copyright (C) 2010 Simon Horman - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Parts inspired by u-boot - */ - -#include -#include -#include -#include -#include -#include -#include - -#define OCR_FASTBOOT (1<<29) -#define OCR_HCS (1<<30) -#define OCR_BUSY (1<<31) - -#define RESP_CMD12 0x00000030 - -static inline u16 sd_ctrl_read16(void __iomem *base, int addr) -{ - return __raw_readw(base + addr); -} - -static inline u32 sd_ctrl_read32(void __iomem *base, int addr) -{ - return __raw_readw(base + addr) | - __raw_readw(base + addr + 2) << 16; -} - -static inline void sd_ctrl_write16(void __iomem *base, int addr, u16 val) -{ - __raw_writew(val, base + addr); -} - -static inline void sd_ctrl_write32(void __iomem *base, int addr, u32 val) -{ - __raw_writew(val, base + addr); - __raw_writew(val >> 16, base + addr + 2); -} - -#define ALL_ERROR (TMIO_STAT_CMD_IDX_ERR | TMIO_STAT_CRCFAIL | \ - TMIO_STAT_STOPBIT_ERR | TMIO_STAT_DATATIMEOUT | \ - TMIO_STAT_RXOVERFLOW | TMIO_STAT_TXUNDERRUN | \ - TMIO_STAT_CMDTIMEOUT | TMIO_STAT_ILL_ACCESS | \ - TMIO_STAT_ILL_FUNC) - -static int sdhi_intr(void __iomem *base) -{ - unsigned long state = sd_ctrl_read32(base, CTL_STATUS); - - if (state & ALL_ERROR) { - sd_ctrl_write32(base, CTL_STATUS, ~ALL_ERROR); - sd_ctrl_write32(base, CTL_IRQ_MASK, - ALL_ERROR | - sd_ctrl_read32(base, CTL_IRQ_MASK)); - return -EINVAL; - } - if (state & TMIO_STAT_CMDRESPEND) { - sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND); - sd_ctrl_write32(base, CTL_IRQ_MASK, - TMIO_STAT_CMDRESPEND | - sd_ctrl_read32(base, CTL_IRQ_MASK)); - return 0; - } - if (state & TMIO_STAT_RXRDY) { - sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_RXRDY); - sd_ctrl_write32(base, CTL_IRQ_MASK, - TMIO_STAT_RXRDY | TMIO_STAT_TXUNDERRUN | - sd_ctrl_read32(base, CTL_IRQ_MASK)); - return 0; - } - if (state & TMIO_STAT_DATAEND) { - sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_DATAEND); - sd_ctrl_write32(base, CTL_IRQ_MASK, - TMIO_STAT_DATAEND | - sd_ctrl_read32(base, CTL_IRQ_MASK)); - return 0; - } - - return -EAGAIN; -} - -static int sdhi_boot_wait_resp_end(void __iomem *base) -{ - int err = -EAGAIN, timeout = 10000000; - - while (timeout--) { - err = sdhi_intr(base); - if (err != -EAGAIN) - break; - udelay(1); - } - - return err; -} - -/* SDHI_CLK_CTRL */ -#define CLK_MMC_ENABLE (1 << 8) -#define CLK_MMC_INIT (1 << 6) /* clk / 256 */ - -static void sdhi_boot_mmc_clk_stop(void __iomem *base) -{ - sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, 0x0000); - msleep(10); - sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, ~CLK_MMC_ENABLE & - sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL)); - msleep(10); -} - -static void sdhi_boot_mmc_clk_start(void __iomem *base) -{ - sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, CLK_MMC_ENABLE | - sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL)); - msleep(10); - sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, CLK_MMC_ENABLE); - msleep(10); -} - -static void sdhi_boot_reset(void __iomem *base) -{ - sd_ctrl_write16(base, CTL_RESET_SD, 0x0000); - msleep(10); - sd_ctrl_write16(base, CTL_RESET_SD, 0x0001); - msleep(10); -} - -/* Set MMC clock / power. - * Note: This controller uses a simple divider scheme therefore it cannot - * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as - * MMC wont run that fast, it has to be clocked at 12MHz which is the next - * slowest setting. - */ -static int sdhi_boot_mmc_set_ios(void __iomem *base, struct mmc_ios *ios) -{ - if (sd_ctrl_read32(base, CTL_STATUS) & TMIO_STAT_CMD_BUSY) - return -EBUSY; - - if (ios->clock) - sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, - ios->clock | CLK_MMC_ENABLE); - - /* Power sequence - OFF -> ON -> UP */ - switch (ios->power_mode) { - case MMC_POWER_OFF: /* power down SD bus */ - sdhi_boot_mmc_clk_stop(base); - break; - case MMC_POWER_ON: /* power up SD bus */ - break; - case MMC_POWER_UP: /* start bus clock */ - sdhi_boot_mmc_clk_start(base); - break; - } - - switch (ios->bus_width) { - case MMC_BUS_WIDTH_1: - sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x80e0); - break; - case MMC_BUS_WIDTH_4: - sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x00e0); - break; - } - - /* Let things settle. delay taken from winCE driver */ - udelay(140); - - return 0; -} - -/* These are the bitmasks the tmio chip requires to implement the MMC response - * types. Note that R1 and R6 are the same in this scheme. */ -#define RESP_NONE 0x0300 -#define RESP_R1 0x0400 -#define RESP_R1B 0x0500 -#define RESP_R2 0x0600 -#define RESP_R3 0x0700 -#define DATA_PRESENT 0x0800 -#define TRANSFER_READ 0x1000 - -static int sdhi_boot_request(void __iomem *base, struct mmc_command *cmd) -{ - int err, c = cmd->opcode; - - switch (mmc_resp_type(cmd)) { - case MMC_RSP_NONE: c |= RESP_NONE; break; - case MMC_RSP_R1: c |= RESP_R1; break; - case MMC_RSP_R1B: c |= RESP_R1B; break; - case MMC_RSP_R2: c |= RESP_R2; break; - case MMC_RSP_R3: c |= RESP_R3; break; - default: - return -EINVAL; - } - - /* No interrupts so this may not be cleared */ - sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND); - - sd_ctrl_write32(base, CTL_IRQ_MASK, TMIO_STAT_CMDRESPEND | - sd_ctrl_read32(base, CTL_IRQ_MASK)); - sd_ctrl_write32(base, CTL_ARG_REG, cmd->arg); - sd_ctrl_write16(base, CTL_SD_CMD, c); - - - sd_ctrl_write32(base, CTL_IRQ_MASK, - ~(TMIO_STAT_CMDRESPEND | ALL_ERROR) & - sd_ctrl_read32(base, CTL_IRQ_MASK)); - - err = sdhi_boot_wait_resp_end(base); - if (err) - return err; - - cmd->resp[0] = sd_ctrl_read32(base, CTL_RESPONSE); - - return 0; -} - -static int sdhi_boot_do_read_single(void __iomem *base, int high_capacity, - unsigned long block, unsigned short *buf) -{ - int err, i; - - /* CMD17 - Read */ - { - struct mmc_command cmd; - - cmd.opcode = MMC_READ_SINGLE_BLOCK | \ - TRANSFER_READ | DATA_PRESENT; - if (high_capacity) - cmd.arg = block; - else - cmd.arg = block * TMIO_BBS; - cmd.flags = MMC_RSP_R1; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - } - - sd_ctrl_write32(base, CTL_IRQ_MASK, - ~(TMIO_STAT_DATAEND | TMIO_STAT_RXRDY | - TMIO_STAT_TXUNDERRUN) & - sd_ctrl_read32(base, CTL_IRQ_MASK)); - err = sdhi_boot_wait_resp_end(base); - if (err) - return err; - - sd_ctrl_write16(base, CTL_SD_XFER_LEN, TMIO_BBS); - for (i = 0; i < TMIO_BBS / sizeof(*buf); i++) - *buf++ = sd_ctrl_read16(base, RESP_CMD12); - - err = sdhi_boot_wait_resp_end(base); - if (err) - return err; - - return 0; -} - -int sdhi_boot_do_read(void __iomem *base, int high_capacity, - unsigned long offset, unsigned short count, - unsigned short *buf) -{ - unsigned long i; - int err = 0; - - for (i = 0; i < count; i++) { - err = sdhi_boot_do_read_single(base, high_capacity, offset + i, - buf + (i * TMIO_BBS / - sizeof(*buf))); - if (err) - return err; - } - - return 0; -} - -#define VOLTAGES (MMC_VDD_32_33 | MMC_VDD_33_34) - -int sdhi_boot_init(void __iomem *base) -{ - bool sd_v2 = false, sd_v1_0 = false; - unsigned short cid; - int err, high_capacity = 0; - - sdhi_boot_mmc_clk_stop(base); - sdhi_boot_reset(base); - - /* mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 */ - { - struct mmc_ios ios; - ios.power_mode = MMC_POWER_ON; - ios.bus_width = MMC_BUS_WIDTH_1; - ios.clock = CLK_MMC_INIT; - err = sdhi_boot_mmc_set_ios(base, &ios); - if (err) - return err; - } - - /* CMD0 */ - { - struct mmc_command cmd; - msleep(1); - cmd.opcode = MMC_GO_IDLE_STATE; - cmd.arg = 0; - cmd.flags = MMC_RSP_NONE; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - msleep(2); - } - - /* CMD8 - Test for SD version 2 */ - { - struct mmc_command cmd; - cmd.opcode = SD_SEND_IF_COND; - cmd.arg = (VOLTAGES != 0) << 8 | 0xaa; - cmd.flags = MMC_RSP_R1; - err = sdhi_boot_request(base, &cmd); /* Ignore error */ - if ((cmd.resp[0] & 0xff) == 0xaa) - sd_v2 = true; - } - - /* CMD55 - Get OCR (SD) */ - { - int timeout = 1000; - struct mmc_command cmd; - - cmd.arg = 0; - - do { - cmd.opcode = MMC_APP_CMD; - cmd.flags = MMC_RSP_R1; - cmd.arg = 0; - err = sdhi_boot_request(base, &cmd); - if (err) - break; - - cmd.opcode = SD_APP_OP_COND; - cmd.flags = MMC_RSP_R3; - cmd.arg = (VOLTAGES & 0xff8000); - if (sd_v2) - cmd.arg |= OCR_HCS; - cmd.arg |= OCR_FASTBOOT; - err = sdhi_boot_request(base, &cmd); - if (err) - break; - - msleep(1); - } while((!(cmd.resp[0] & OCR_BUSY)) && --timeout); - - if (!err && timeout) { - if (!sd_v2) - sd_v1_0 = true; - high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS; - } - } - - /* CMD1 - Get OCR (MMC) */ - if (!sd_v2 && !sd_v1_0) { - int timeout = 1000; - struct mmc_command cmd; - - do { - cmd.opcode = MMC_SEND_OP_COND; - cmd.arg = VOLTAGES | OCR_HCS; - cmd.flags = MMC_RSP_R3; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - - msleep(1); - } while((!(cmd.resp[0] & OCR_BUSY)) && --timeout); - - if (!timeout) - return -EAGAIN; - - high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS; - } - - /* CMD2 - Get CID */ - { - struct mmc_command cmd; - cmd.opcode = MMC_ALL_SEND_CID; - cmd.arg = 0; - cmd.flags = MMC_RSP_R2; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - } - - /* CMD3 - * MMC: Set the relative address - * SD: Get the relative address - * Also puts the card into the standby state - */ - { - struct mmc_command cmd; - cmd.opcode = MMC_SET_RELATIVE_ADDR; - cmd.arg = 0; - cmd.flags = MMC_RSP_R1; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - cid = cmd.resp[0] >> 16; - } - - /* CMD9 - Get CSD */ - { - struct mmc_command cmd; - cmd.opcode = MMC_SEND_CSD; - cmd.arg = cid << 16; - cmd.flags = MMC_RSP_R2; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - } - - /* CMD7 - Select the card */ - { - struct mmc_command cmd; - cmd.opcode = MMC_SELECT_CARD; - //cmd.arg = rca << 16; - cmd.arg = cid << 16; - //cmd.flags = MMC_RSP_R1B; - cmd.flags = MMC_RSP_R1; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - } - - /* CMD16 - Set the block size */ - { - struct mmc_command cmd; - cmd.opcode = MMC_SET_BLOCKLEN; - cmd.arg = TMIO_BBS; - cmd.flags = MMC_RSP_R1; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - } - - return high_capacity; -} diff --git a/arch/arm/boot/compressed/sdhi-shmobile.h b/arch/arm/boot/compressed/sdhi-shmobile.h deleted file mode 100644 index 92eaa09f985eecdd603a080f3650cea7d8836e63..0000000000000000000000000000000000000000 --- a/arch/arm/boot/compressed/sdhi-shmobile.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef SDHI_MOBILE_H -#define SDHI_MOBILE_H - -#include - -int sdhi_boot_do_read(void __iomem *base, int high_capacity, - unsigned long offset, unsigned short count, - unsigned short *buf); -int sdhi_boot_init(void __iomem *base); - -#endif diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a1c776b8dcec51554879d1e001f7f96bd653efd8..86217db2937ab331666b710c1bd639c68caad516 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1,5 +1,7 @@ ifeq ($(CONFIG_OF),y) +dtb-$(CONFIG_ARCH_ALPINE) += \ + alpine-db.dtb dtb-$(CONFIG_MACH_ASM9260) += \ alphascale-asm9260-devkit.dtb # Keep at91 dtb files sorted alphabetically for each SoC @@ -42,6 +44,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ sama5d34ek.dtb \ sama5d35ek.dtb \ sama5d36ek.dtb \ + at91-sama5d4_xplained.dtb \ at91-sama5d4ek.dtb dtb-$(CONFIG_ARCH_ATLAS6) += \ atlas6-evb.dtb @@ -59,13 +62,15 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-netgear-r6300-v2.dtb \ bcm47081-asus-rt-n18u.dtb \ bcm47081-buffalo-wzr-600dhp2.dtb \ - bcm47081-buffalo-wzr-900dhp.dtb + bcm47081-buffalo-wzr-900dhp.dtb \ + bcm4709-netgear-r8000.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += \ bcm963138dvt.dtb dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \ bcm911360_entphn.dtb \ bcm911360k.dtb \ - bcm958300k.dtb + bcm958300k.dtb \ + bcm958305k.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += \ bcm28155-ap.dtb \ bcm21664-garnet.dtb @@ -165,6 +170,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-lsxhl.dtb \ kirkwood-mplcec4.dtb \ kirkwood-mv88f6281gtw-ge.dtb \ + kirkwood-nas2big.dtb \ kirkwood-net2big.dtb \ kirkwood-net5big.dtb \ kirkwood-netgear_readynas_duo_v2.dtb \ @@ -199,6 +205,8 @@ dtb-$(CONFIG_ARCH_LPC32XX) += \ ea3250.dtb phy3250.dtb dtb-$(CONFIG_MACH_MESON6) += \ meson6-atv1200.dtb +dtb-$(CONFIG_MACH_MESON8) += \ + meson8-minix-neo-x8.dtb dtb-$(CONFIG_ARCH_MMP) += \ pxa168-aspenite.dtb \ pxa910-dkb.dtb \ @@ -299,9 +307,11 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-wandboard.dtb \ imx6q-wandboard-revb1.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ - imx6sl-evk.dtb + imx6sl-evk.dtb \ + imx6sl-warp.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-sabreauto.dtb \ + imx6sx-sdb-reva.dtb \ imx6sx-sdb.dtb dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-qds.dtb \ @@ -386,6 +396,8 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ omap3-overo-storm-tobi.dtb \ omap3-overo-summit.dtb \ omap3-overo-tobi.dtb \ + omap3-pandora-600mhz.dtb \ + omap3-pandora-1ghz.dtb \ omap3-sbc-t3517.dtb \ omap3-sbc-t3530.dtb \ omap3-sbc-t3730.dtb \ @@ -401,7 +413,8 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-evmsk.dtb \ am335x-nano.dtb \ am335x-pepper.dtb \ - am335x-lxm.dtb + am335x-lxm.dtb \ + am335x-chiliboard.dtb dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-duovero-parlor.dtb \ omap4-panda.dtb \ @@ -464,25 +477,23 @@ dtb-$(CONFIG_ARCH_S5PV210) += \ s5pv210-smdkv210.dtb \ s5pv210-torbreck.dtb dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \ - r8a73a4-ape6evm.dtb \ - r8a73a4-ape6evm-reference.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ r8a7778-bockw-reference.dtb \ r8a7779-marzen.dtb \ - sh7372-mackerel.dtb \ - sh73a0-kzm9g.dtb \ - sh73a0-kzm9g-reference.dtb + sh73a0-kzm9g.dtb dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ emev2-kzm9d.dtb \ r7s72100-genmai.dtb \ r8a73a4-ape6evm.dtb \ r8a7740-armadillo800eva.dtb \ + r8a7778-bockw.dtb \ r8a7779-marzen.dtb \ r8a7790-lager.dtb \ r8a7791-henninger.dtb \ r8a7791-koelsch.dtb \ - r8a7794-alt.dtb + r8a7794-alt.dtb \ + sh73a0-kzm9g.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ socfpga_arria10_socdk.dtb \ @@ -577,6 +588,7 @@ dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \ dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \ tegra124-jetson-tk1.dtb \ tegra124-nyan-big.dtb \ + tegra124-nyan-blaze.dtb \ tegra124-venice2.dtb dtb-$(CONFIG_ARCH_U300) += \ ste-u300.dtb @@ -624,11 +636,14 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \ armada-388-db.dtb \ armada-388-gp.dtb \ armada-388-rd.dtb +dtb-$(CONFIG_MACH_ARMADA_39X) += \ + armada-398-db.dtb dtb-$(CONFIG_MACH_ARMADA_XP) += \ armada-xp-axpwifiap.dtb \ armada-xp-db.dtb \ armada-xp-gp.dtb \ armada-xp-lenovo-ix4-300d.dtb \ + armada-xp-linksys-mamba.dtb \ armada-xp-matrix.dtb \ armada-xp-netgear-rn2120.dtb \ armada-xp-openblocks-ax3-4.dtb \ diff --git a/arch/arm/boot/dts/alpine-db.dts b/arch/arm/boot/dts/alpine-db.dts new file mode 100644 index 0000000000000000000000000000000000000000..dfb5a08022732ef629053bb85813e836e02d1d87 --- /dev/null +++ b/arch/arm/boot/dts/alpine-db.dts @@ -0,0 +1,35 @@ +/* + * Copyright 2015 Annapurna Labs Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * Alternatively, redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +/dts-v1/; + +#include "alpine.dtsi" + +/ { + model = "Annapurna Labs Alpine Dev Board"; + /* no need for anything outside SOC */ +}; + diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..9af2d60e9a7f6edb33e0193b81f99d6cbefd134c --- /dev/null +++ b/arch/arm/boot/dts/alpine.dtsi @@ -0,0 +1,160 @@ +/* + * Copyright 2015 Annapurna Labs Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * Alternatively, redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +#include +#include "skeleton64.dtsi" + +/ { + /* SOC compatibility */ + compatible = "al,alpine"; + + /* CPU Configuration */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "al,alpine-smp"; + + cpu@0 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0>; + clock-frequency = <0>; /* Filled by loader */ + }; + + cpu@1 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <1>; + clock-frequency = <0>; /* Filled by loader */ + }; + + cpu@2 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <2>; + clock-frequency = <0>; /* Filled by loader */ + }; + + cpu@3 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <3>; + clock-frequency = <0>; /* Filled by loader */ + }; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + arch-timer { + compatible = "arm,cortex-a15-timer", + "arm,armv7-timer"; + interrupts = + , + , + , + ; + clock-frequency = <0>; /* Filled by loader */ + }; + + /* Interrupt Controller */ + gic: gic@fb001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #size-cells = <0>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xfb001000 0x0 0x1000>, + <0x0 0xfb002000 0x0 0x2000>, + <0x0 0xfb004000 0x0 0x1000>, + <0x0 0xfb006000 0x0 0x2000>; + interrupts = + ; + }; + + /* CPU Resume registers */ + cpu-resume@fbff5ec0 { + compatible = "al,alpine-cpu-resume"; + reg = <0x0 0xfbff5ec0 0x0 0x30>; + }; + + /* North Bridge Service Registers */ + sysfabric-service@fb070000 { + compatible = "al,alpine-sysfabric-service", "syscon"; + reg = <0x0 0xfb070000 0x0 0x10000>; + }; + + /* Performance Monitor Unit */ + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = , + , + , + ; + }; + + uart0:uart@fd883000 { + compatible = "ns16550a"; + reg = <0x0 0xfd883000 0x0 0x1000>; + clock-frequency = <0>; /* Filled by loader */ + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + }; + + uart1:uart@0xfd884000 { + compatible = "ns16550a"; + reg = <0x0 0xfd884000 0x0 0x1000>; + clock-frequency = <0>; /* Filled by loader */ + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + }; + + /* Internal PCIe Controller */ + pcie-internal@0xfbc00000 { + compatible = "pci-host-ecam-generic"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + #interrupt-cells = <1>; + reg = <0x0 0xfbc00000 0x0 0x100000>; + interrupt-map-mask = <0xf800 0 0 7>; + /* Add legacy interrupts for SATA devices only */ + interrupt-map = <0x4000 0 0 1 &gic 0 43 4>, + <0x4800 0 0 1 &gic 0 44 4>; + + /* 32 bit non prefetchable memory space */ + ranges = <0x02000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>; + + bus-range = <0x00 0x00>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts new file mode 100644 index 0000000000000000000000000000000000000000..310da20a8aa765f8a9e5a2d61c17c028b04263ff --- /dev/null +++ b/arch/arm/boot/dts/am335x-chiliboard.dts @@ -0,0 +1,112 @@ +/* + * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/ + * Author: Rostislav Lisovy + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; +#include "am335x-chilisom.dtsi" + +/ { + model = "AM335x Chiliboard"; + compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom", + "ti,am33xx"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_gpio_pins>; + + led0 { + label = "led0"; + gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "heartbeat"; + }; + + led1 { + label = "led1"; + gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + }; +}; + +&am33xx_pinmux { + usb1_drvvbus: usb1_drvvbus { + pinctrl-single,pins = < + 0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */ + >; + }; + + sd_pins: pinmux_sd_card { + pinctrl-single,pins = < + 0xf0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + 0xf4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + 0xf8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + 0xfc (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + + led_gpio_pins: led_gpio_pins { + pinctrl-single,pins = < + 0x1e4 (PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */ + 0x1e8 (PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */ + >; + }; +}; + +&ldo4_reg { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +}; + +/* Ethernet */ +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rmii"; +}; + +&phy_sel { + rmii-clock-ext; +}; + +/* USB */ +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_drvvbus>; + + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +/* microSD */ +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&sd_pins>; + vmmc-supply = <&ldo4_reg>; + bus-width = <0x4>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..7e9a34dffe2113c6bdff809d0ee23a1830062800 --- /dev/null +++ b/arch/arm/boot/dts/am335x-chilisom.dtsi @@ -0,0 +1,239 @@ +/* + * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/ + * Author: Rostislav Lisovy + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include "am33xx.dtsi" + +/ { + model = "Grinn AM335x ChiliSOM"; + compatible = "grinn,am335x-chilisom", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + 0x13c (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + 0x140 (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* mdio_data.mdio_data */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) + /* mdio_clk.mdio_clk */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + nandflash_pins: nandflash_pins { + pinctrl-single,pins = < + 0x00 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + 0x04 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + 0x08 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + 0x0c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + 0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + 0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + 0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + 0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + + 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + 0x90 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + 0x94 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + 0x98 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + 0x9c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + +}; + +/include/ "tps65217.dtsi" + +&tps { + regulators { + dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3d"; + regulator-boot-on; + regulator-always-on; + }; + }; +}; + +/* Ethernet MAC */ +&mac { + slaves = <1>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +/* NAND Flash */ +&elm { + status = "okay"; +}; + +&gpmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins>; + ranges = <0 0 0x08000000 0x01000000>; /* CS0 0 @addr 0x08000000, size 0x01000000 */ + nand@0,0 { + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + ti,nand-ecc-opt = "bch8"; + ti,elm-id = <&elm>; + nand-bus-width = <8>; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wait-on-read = "true"; + gpmc,wait-on-write = "true"; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + }; +}; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index df5fee6b6b4bcf7ac58d33fc1d25b58cb07890a8..87fc7a35e80261cad03261fd9cf8b047606fc286 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -15,6 +15,7 @@ #include "am33xx.dtsi" #include +#include / { model = "TI AM335x EVM-SK"; @@ -647,6 +648,16 @@ cap-power-off-card; pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio1>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */ + ref-clock-frequency = <38400000>; + }; }; &mcasp1 { diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index a3466455b17188eaafec7eab8b613550a264d3da..5ed4ca6eaf55b6ea0adeae9f0ea635fce453a6ef 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -213,7 +213,9 @@ pinctrl-0 = <&i2c0_pins>; gpio@20 { - compatible = "mcp,mcp23017"; + compatible = "microchip,mcp23017"; + gpio-controller; + #gpio-cells = <2>; reg = <0x20>; }; @@ -222,7 +224,7 @@ }; eeprom@53 { - compatible = "mcp,24c02"; + compatible = "microchip,24c02"; reg = <0x53>; pagesize = <8>; }; @@ -297,8 +299,8 @@ | |-->0x004FFFFF-> Kernel end | |-->0x00500000-> File system start | | - | |-->0x014FFFFF-> File system end - | |-->0x01500000-> User data start + | |-->0x01FFFFFF-> File system end + | |-->0x02000000-> User data start | | | |-->0x03FFFFFF-> User data end | |-->0x04000000-> Data storage start @@ -327,12 +329,12 @@ partition@4 { label = "rootfs"; - reg = <0x00500000 0x01000000>; /* 16MB */ + reg = <0x00500000 0x01b00000>; /* 27MB */ }; partition@5 { label = "user"; - reg = <0x01500000 0x02b00000>; /* 43MB */ + reg = <0x02000000 0x02000000>; /* 32MB */ }; partition@6 { @@ -343,7 +345,7 @@ }; &mac { - dual_emac = <1>; + dual_emac; status = "okay"; }; @@ -353,11 +355,13 @@ &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; + phy-mode = "mii"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi index 071b56aa0c7e05fd18201b25ba75836edb9aed5e..afb4b3a7bab47b5e426e4e9a25f1a6dd4ec4f360 100644 --- a/arch/arm/boot/dts/am33xx-clocks.dtsi +++ b/arch/arm/boot/dts/am33xx-clocks.dtsi @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -&scrm_clocks { +&scm_clocks { sys_clkin_ck: sys_clkin_ck { #clock-cells = <0>; compatible = "ti,mux-clock"; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index acd37057bca94377e5f092a754ee9cece5dede8a..21fcc440fc1a9d886d408701a705ad4daabd2325 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -83,20 +83,6 @@ }; }; - am33xx_control_module: control_module@4a002000 { - compatible = "syscon"; - reg = <0x44e10000 0x7fc>; - }; - - am33xx_pinmux: pinmux@44e10800 { - compatible = "pinctrl-single"; - reg = <0x44e10800 0x0238>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x7f>; - }; - /* * XXX: Use a flat representation of the AM33XX interconnect. * The real AM33XX interconnect network is quite complex. Since @@ -111,37 +97,58 @@ ranges; ti,hwmods = "l3_main"; - prcm: prcm@44e00000 { - compatible = "ti,am3-prcm"; - reg = <0x44e00000 0x4000>; - - prcm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + l4_wkup: l4_wkup@44c00000 { + compatible = "ti,am3-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x44c00000 0x280000>; - prcm_clockdomains: clockdomains { - }; - }; + prcm: prcm@200000 { + compatible = "ti,am3-prcm"; + reg = <0x200000 0x4000>; - scrm: scrm@44e10000 { - compatible = "ti,am3-scrm"; - reg = <0x44e10000 0x2000>; + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; + prcm_clockdomains: clockdomains { + }; }; - scrm_clockdomains: clockdomains { + scm: scm@210000 { + compatible = "ti,am3-scm", "simple-bus"; + reg = <0x210000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x210000 0x2000>; + + am33xx_pinmux: pinmux@800 { + compatible = "pinctrl-single"; + reg = <0x800 0x238>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x7f>; + }; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + scm_clockdomains: clockdomains { + }; }; }; - cm: syscon@44e10000 { - compatible = "ti,am33xx-controlmodule", "syscon"; - reg = <0x44e10000 0x800>; - }; - intc: interrupt-controller@48200000 { compatible = "ti,am33xx-intc"; interrupt-controller; @@ -350,7 +357,7 @@ reg = <0x481cc000 0x2000>; clocks = <&dcan0_fck>; clock-names = "fck"; - syscon-raminit = <&am33xx_control_module 0x644 0>; + syscon-raminit = <&scm_conf 0x644 0>; interrupts = <52>; status = "disabled"; }; @@ -361,7 +368,7 @@ reg = <0x481d0000 0x2000>; clocks = <&dcan1_fck>; clock-names = "fck"; - syscon-raminit = <&am33xx_control_module 0x644 1>; + syscon-raminit = <&scm_conf 0x644 1>; interrupts = <55>; status = "disabled"; }; @@ -720,7 +727,7 @@ */ interrupts = <40 41 42 43>; ranges; - syscon = <&cm>; + syscon = <&scm_conf>; status = "disabled"; davinci_mdio: mdio@4a101000 { diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index c90724bded1081b7ea6e22461451e39d48828cec..f164dce08755cc5866b79133050db9f808cafce9 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -31,7 +31,7 @@ status = "disabled"; reg = <0x5c000000 0x30000>; interrupts = <67 68 69 70>; - syscon = <&omap3_scm_general>; + syscon = <&scm_conf>; ti,davinci-ctrl-reg-offset = <0x10000>; ti,davinci-ctrl-mod-reg-offset = <0>; ti,davinci-ctrl-ram-offset = <0x20000>; diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi index df489d310b50aa0ad01f7750cb6fb17ea36da540..518b8fde88b0c87005fe68e413cfee769befac07 100644 --- a/arch/arm/boot/dts/am35xx-clocks.dtsi +++ b/arch/arm/boot/dts/am35xx-clocks.dtsi @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -&scrm_clocks { +&scm_clocks { emac_ick: emac_ick { #clock-cells = <0>; compatible = "ti,am35xx-gate-clock"; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 8a099bc10c1e4579e765819d2f87bd92bec8e4a5..c80a3e23379213f67fa92fa7a5ba62f3b44c01c2 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -66,22 +66,6 @@ cache-level = <2>; }; - am43xx_control_module: control_module@4a002000 { - compatible = "syscon"; - reg = <0x44e10000 0x7f4>; - }; - - am43xx_pinmux: pinmux@44e10800 { - compatible = "ti,am437-padconf", "pinctrl-single"; - reg = <0x44e10800 0x31c>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0xffffffff>; - }; - ocp { compatible = "ti,am4372-l3-noc", "simple-bus"; #address-cells = <1>; @@ -93,29 +77,58 @@ interrupts = , ; - prcm: prcm@44df0000 { - compatible = "ti,am4-prcm"; - reg = <0x44df0000 0x11000>; - - prcm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + l4_wkup: l4_wkup@44c00000 { + compatible = "ti,am4-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x44c00000 0x287000>; - prcm_clockdomains: clockdomains { - }; - }; + prcm: prcm@1f0000 { + compatible = "ti,am4-prcm"; + reg = <0x1f0000 0x11000>; - scrm: scrm@44e10000 { - compatible = "ti,am4-scrm"; - reg = <0x44e10000 0x2000>; + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; + prcm_clockdomains: clockdomains { + }; }; - scrm_clockdomains: clockdomains { + scm: scm@210000 { + compatible = "ti,am4-scm", "simple-bus"; + reg = <0x210000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x210000 0x4000>; + + am43xx_pinmux: pinmux@800 { + compatible = "ti,am437-padconf", + "pinctrl-single"; + reg = <0x800 0x31c>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + scm_clockdomains: clockdomains { + }; }; }; @@ -796,7 +809,7 @@ }; ocp2scp0: ocp2scp@483a8000 { - compatible = "ti,omap-ocp2scp"; + compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -815,7 +828,7 @@ }; ocp2scp1: ocp2scp@483e8000 { - compatible = "ti,omap-ocp2scp"; + compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -893,7 +906,7 @@ }; hdq: hdq@48347000 { - compatible = "ti,am43xx-hdq"; + compatible = "ti,am4372-hdq"; reg = <0x48347000 0x1000>; interrupts = ; clocks = <&func_12m_clk>; @@ -942,7 +955,7 @@ clocks = <&dcan0_fck>; clock-names = "fck"; reg = <0x481cc000 0x2000>; - syscon-raminit = <&am43xx_control_module 0x644 0>; + syscon-raminit = <&scm_conf 0x644 0>; interrupts = ; status = "disabled"; }; @@ -953,7 +966,7 @@ clocks = <&dcan1_fck>; clock-names = "fck"; reg = <0x481d0000 0x2000>; - syscon-raminit = <&am43xx_control_module 0x644 1>; + syscon-raminit = <&scm_conf 0x644 1>; interrupts = ; status = "disabled"; }; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index 0198f5a62b96cd8b8569d4ae5d6dfd2938fcd580..378344271746f20446cc8654c52fd2ef46c5cda2 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -133,6 +133,20 @@ >; }; + i2c2_pins_default: i2c2_pins_default { + pinctrl-single,pins = < + 0x1e8 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */ + 0x1ec (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */ + >; + }; + + i2c2_pins_sleep: i2c2_pins_sleep { + pinctrl-single,pins = < + 0x1e8 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1ec (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + mmc1_pins_default: pinmux_mmc1_pins_default { pinctrl-single,pins = < 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ @@ -263,6 +277,14 @@ }; }; +&i2c2 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_pins_default>; + pinctrl-1 = <&i2c2_pins_sleep>; + clock-frequency = <100000>; +}; + &epwmss0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 8ae29c955c11d7f83f4423184a8ed61412b515dd..c17097d2c167d4718f76200f51e599d6605d144e 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -49,7 +49,7 @@ pinctrl-0 = <&matrix_keypad_pins>; debounce-delay-ms = <5>; - col-scan-delay-us = <1500>; + col-scan-delay-us = <5>; row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */ &gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */ @@ -473,7 +473,7 @@ interrupt-parent = <&gpio0>; interrupts = <31 0>; - wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; touchscreen-size-x = <480>; touchscreen-size-y = <272>; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 1d7109196872299464ccfb5f3a1938b76e4f68ef..795d68af6df9dbcf9b09b71350e7816606f7994a 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -69,7 +69,48 @@ }; }; - am43xx_pinmux: pinmux@44e10800 { + matrix_keypad: matrix_keypad@0 { + compatible = "gpio-matrix-keypad"; + debounce-delay-ms = <5>; + col-scan-delay-us = <2>; + + row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */ + &gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */ + &gpio0 14 GPIO_ACTIVE_HIGH /* Bank0, pin14 */ + &gpio0 15 GPIO_ACTIVE_HIGH>; /* Bank0, pin15 */ + + col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH /* Bank3, pin9 */ + &gpio3 10 GPIO_ACTIVE_HIGH /* Bank3, pin10 */ + &gpio2 18 GPIO_ACTIVE_HIGH /* Bank2, pin18 */ + &gpio2 19 GPIO_ACTIVE_HIGH>; /* Bank2, pin19 */ + + linux,keymap = <0x00000201 /* P1 */ + 0x01000204 /* P4 */ + 0x02000207 /* P7 */ + 0x0300020a /* NUMERIC_STAR */ + 0x00010202 /* P2 */ + 0x01010205 /* P5 */ + 0x02010208 /* P8 */ + 0x03010200 /* P0 */ + 0x00020203 /* P3 */ + 0x01020206 /* P6 */ + 0x02020209 /* P9 */ + 0x0302020b /* NUMERIC_POUND */ + 0x00030067 /* UP */ + 0x0103006a /* RIGHT */ + 0x0203006c /* DOWN */ + 0x03030069>; /* LEFT */ + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; +}; + +&am43xx_pinmux { cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ @@ -279,47 +320,6 @@ 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) >; }; - }; - - matrix_keypad: matrix_keypad@0 { - compatible = "gpio-matrix-keypad"; - debounce-delay-ms = <5>; - col-scan-delay-us = <2>; - - row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */ - &gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */ - &gpio0 14 GPIO_ACTIVE_HIGH /* Bank0, pin14 */ - &gpio0 15 GPIO_ACTIVE_HIGH>; /* Bank0, pin15 */ - - col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH /* Bank3, pin9 */ - &gpio3 10 GPIO_ACTIVE_HIGH /* Bank3, pin10 */ - &gpio2 18 GPIO_ACTIVE_HIGH /* Bank2, pin18 */ - &gpio2 19 GPIO_ACTIVE_HIGH>; /* Bank2, pin19 */ - - linux,keymap = <0x00000201 /* P1 */ - 0x01000204 /* P4 */ - 0x02000207 /* P7 */ - 0x0300020a /* NUMERIC_STAR */ - 0x00010202 /* P2 */ - 0x01010205 /* P5 */ - 0x02010208 /* P8 */ - 0x03010200 /* P0 */ - 0x00020203 /* P3 */ - 0x01020206 /* P6 */ - 0x02020209 /* P9 */ - 0x0302020b /* NUMERIC_POUND */ - 0x00030067 /* UP */ - 0x0103006a /* RIGHT */ - 0x0203006c /* DOWN */ - 0x03030069>; /* LEFT */ - }; - - backlight { - compatible = "pwm-backlight"; - pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 51 53 56 62 75 101 152 255>; - default-brightness-level = <8>; - }; }; &mmc1 { diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index cfb49686ab6af02ba7086e344869ee9ad457a2aa..d0c0dfa4ec486e5927abda3d9f4189435a51d23e 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -&scrm_clocks { +&scm_clocks { sys_clkin_ck: sys_clkin_ck { #clock-cells = <0>; compatible = "ti,mux-clock"; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index bd48dba1674865878049e7786e28c7b720feb0cf..7128fad991ac3459ac5349b0219e893fab1830c8 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -8,7 +8,6 @@ /dts-v1/; #include "dra74x.dtsi" -#include #include #include @@ -19,6 +18,7 @@ aliases { rtc0 = &mcp_rtc; rtc1 = &tps659038_rtc; + rtc2 = &rtc; }; memory { @@ -84,9 +84,10 @@ gpio_fan: gpio_fan { /* Based on 5v 500mA AFB02505HHB */ compatible = "gpio-fan"; - gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>; + gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>; gpio-fan,speed-map = <0 0>, <13000 1>; + #cooling-cells = <2>; }; extcon_usb1: extcon_usb1 { @@ -130,8 +131,8 @@ uart3_pins_default: uart3_pins_default { pinctrl-single,pins = < - 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */ - 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */ + 0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */ + 0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */ >; }; @@ -442,6 +443,7 @@ pinctrl-0 = <&tmp102_pins_default>; interrupt-parent = <&gpio7>; interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; }; }; @@ -454,7 +456,7 @@ mcp_rtc: rtc@6f { compatible = "microchip,mcp7941x"; reg = <0x6f>; - interrupts = ; /* IRQ_SYS_1N */ + interrupts = ; /* IRQ_SYS_1N */ pinctrl-names = "default"; pinctrl-0 = <&mcp79410_pins_default>; @@ -477,7 +479,7 @@ &uart3 { status = "okay"; interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, - <&dra7_pmx_core 0x248>; + <&dra7_pmx_core 0x3f8>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins_default>; @@ -548,6 +550,61 @@ pinctrl-0 = <&usb1_pins>; }; +&omap_dwc3_1 { + extcon = <&extcon_usb1>; +}; + +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; + &usb2 { dr_mode = "peripheral"; }; + +&cpu_trips { + cpu_alert1: cpu_alert1 { + temperature = <50000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; +}; + +&cpu_cooling_maps { + map1 { + trip = <&cpu_alert1>; + cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; +}; + +&thermal_zones { + board_thermal: board_thermal { + polling-delay-passive = <1250>; /* milliseconds */ + polling-delay = <1500>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&tmp102 0>; + + board_trips: trips { + board_alert0: board_alert { + temperature = <40000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + + board_crit: board_crit { + temperature = <105000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + + board_cooling_maps: cooling-maps { + map0 { + trip = <&board_alert0>; + cooling-device = + <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index e993c46bd47273b247d80f49c0521c08e06767d5..19f3bf271915fc1dd843a7d10d50df353b4b52d2 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -45,6 +45,15 @@ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. */ /dts-v1/; @@ -55,7 +64,7 @@ compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { @@ -64,7 +73,7 @@ }; soc { - ranges = ; internal-regs { diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index b10ceb488efe5d5aec3b8e91241ae6172e206564..0f40d5da28c3c30ec83a27bacbf9332d9ad23c41 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -51,7 +51,7 @@ compatible = "globalscale,mirabox", "marvell,armada370", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 3f8cc3845a5e9423f0536ee3c201af4a1b8c5e51..a31207860f34ea385cee3d241c1c902a48d7d6a2 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -53,7 +53,7 @@ compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index 99eb8a014ac631df0a26b992f571be829c467411..00540f292979c57e4107ca4b4b9ef51c89e28009 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -53,7 +53,7 @@ compatible = "netgear,readynas-104", "marvell,armada370", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 6ae36a38beb25b8b1f9930f74dcb250173c627e7..19475e68b8e9246ef5220e0ec3857e5bee4b2192 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -64,7 +64,7 @@ compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index 59f74e66963f164b7949f41dc6a520077e2d7fd8..b42b767763aaa41c5a96420e4415efc7683adb16 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -67,8 +67,7 @@ "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 8a322ad57e5fbb0bd0ef15ca19f4387169abeb03..ec96f0b3634653a5976739688eca9fd791eaba0b 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -59,8 +59,8 @@ compatible = "marvell,armada-370-xp"; aliases { - eth0 = ð0; - eth1 = ð1; + serial0 = &uart0; + serial1 = &uart1; }; cpus { @@ -73,6 +73,11 @@ }; }; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts-extended = <&mpic 3>; + }; + soc { #address-cells = <2>; #size-cells = <1>; @@ -223,7 +228,7 @@ <0x20250 0x8>; }; - mpic: interrupt-controller@20000 { + mpic: interrupt-controller@20a00 { compatible = "marvell,mpic"; #interrupt-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 27397f151def76d9560a6855c87f2ea7afc052bd..00b50db57c9c0f7ab4111bbdba06d3fd0bdc93ad 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -129,6 +129,7 @@ compatible = "marvell,aurora-outer-cache"; reg = <0x08000 0x1000>; cache-id-part = <0x100>; + cache-level = <2>; cache-unified; wt-override; }; @@ -232,7 +233,7 @@ reg = <0x18330 0x4>; }; - interrupt-controller@20000 { + interrupt-controller@20a00 { reg = <0x20a00 0x1d0>, <0x21870 0x58>; }; diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 0440891425c0408723c6ea75db1518105328f2db..4eabc9c21f8dc1e84f399edb6e56a2bdf992a7ed 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -55,7 +55,7 @@ compatible = "marvell,a375-db", "marvell,armada375"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index ba3c57e0af72ac577d2e82fa3d9536569dd98e24..f076ff856d8b8223466f3ec8536caaa1974186ca 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -60,8 +60,8 @@ gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; - ethernet0 = ð0; - ethernet1 = ð1; + serial0 = &uart0; + serial1 = &uart1; }; clocks { @@ -69,7 +69,7 @@ mainpll: mainpll { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <2000000000>; + clock-frequency = <1000000000>; }; /* 25 MHz reference crystal */ refclk: oscillator { @@ -96,6 +96,11 @@ }; }; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts-extended = <&mpic 3>; + }; + soc { compatible = "marvell,armada375-mbus", "simple-bus"; #address-cells = <2>; @@ -276,7 +281,7 @@ status = "disabled"; }; - serial@12000 { + uart0: serial@12000 { compatible = "snps,dw-apb-uart"; reg = <0x12000 0x100>; reg-shift = <2>; @@ -286,7 +291,7 @@ status = "disabled"; }; - serial@12100 { + uart1: serial@12100 { compatible = "snps,dw-apb-uart"; reg = <0x12100 0x100>; reg-shift = <2>; @@ -394,7 +399,7 @@ reg = <0x20000 0x100>, <0x20180 0x20>; }; - mpic: interrupt-controller@20000 { + mpic: interrupt-controller@20a00 { compatible = "marvell,mpic"; reg = <0x20a00 0x2d0>, <0x21070 0x58>; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index 57b9119fb3e05e974ee8931286d2635ab57110fe..7219ac3a3d900743114fd7d9001748118695515e 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -49,8 +49,7 @@ compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x"; chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &uart1; + stdout-path = "serial1:115200n8"; }; memory { @@ -126,6 +125,13 @@ status = "okay"; }; + pinctrl@18000 { + xhci0_vbus_pins: xhci0-vbus-pins { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + }; + ethernet@30000 { status = "okay"; phy = <&phy2>; @@ -150,6 +156,24 @@ phy = <&phy0>; phy-mode = "rgmii-id"; }; + + nfc: flash@d0000 { + status = "okay"; + #address-cells = <1>; + #size-cells = <1>; + + num-cs = <1>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + }; + + usb3@f0000 { + status = "okay"; + usb-phy = <&usb3_phy>; + }; }; pcie-controller { @@ -175,4 +199,20 @@ }; }; }; + + usb3_phy: usb3_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_xhci0_vbus>; + }; + + reg_xhci0_vbus: xhci0-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&xhci0_vbus_pins>; + regulator-name = "xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; }; diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index 16512efcd32c091702a9a99c6ea93139598b8a5f..51d1623de53e6967750b6c602ccaeef40359a535 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -54,7 +54,7 @@ "marvell,armada385", "marvell,armada380"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { @@ -99,7 +99,7 @@ phy-mode = "rgmii-id"; }; - usb@50000 { + usb@58000 { status = "ok"; }; diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index 590b383db323a75a1041080951d32dbf27e3e9fa..78514ab0b47ace058f49b0da052d131374a8f5d2 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -48,8 +48,7 @@ compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380"; chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; memory { @@ -135,7 +134,7 @@ }; /* CON4 */ - usb@50000 { + usb@58000 { vcc-supply = <®_usb2_0_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts index d99baac72081b6873532bec2d2587c769a581040..1dc6e2341cc2853829abb077441b27f2cfe4456e 100644 --- a/arch/arm/boot/dts/armada-388-rd.dts +++ b/arch/arm/boot/dts/armada-388-rd.dts @@ -55,7 +55,7 @@ "marvell,armada385","marvell,armada380"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { @@ -85,6 +85,16 @@ clock-frequency = <100000>; }; + sdhci@d8000 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhci_pins>; + broken-cd; + no-1-8-v; + wp-inverted; + bus-width = <8>; + status = "okay"; + }; + serial@12000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 1dff30a81e247a12ecd88f1c37b2b8dd6a55d2c1..218a2acd36e509b0de8e22dc207e06253b1163fe 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -59,9 +59,13 @@ aliases { gpio0 = &gpio0; gpio1 = &gpio1; - ethernet0 = ð0; - ethernet1 = ð1; - ethernet2 = ð2; + serial0 = &uart0; + serial1 = &uart1; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts-extended = <&mpic 3>; }; soc { @@ -216,7 +220,7 @@ status = "disabled"; }; - serial@12100 { + uart1: serial@12100 { compatible = "snps,dw-apb-uart"; reg = <0x12100 0x100>; reg-shift = <2>; @@ -368,7 +372,7 @@ reg = <0x20000 0x100>, <0x20180 0x20>; }; - mpic: interrupt-controller@20000 { + mpic: interrupt-controller@20a00 { compatible = "marvell,mpic"; reg = <0x20a00 0x2d0>, <0x21070 0x58>; #interrupt-cells = <1>; @@ -435,7 +439,7 @@ status = "disabled"; }; - usb@50000 { + usb@58000 { compatible = "marvell,orion-ehci"; reg = <0x58000 0x500>; interrupts = ; @@ -548,8 +552,11 @@ sdhci@d8000 { compatible = "marvell,armada-380-sdhci"; - reg = <0xd8000 0x1000>, <0xdc000 0x100>; - interrupts = <0 25 0x4>; + reg-names = "sdhci", "mbus", "conf-sdio3"; + reg = <0xd8000 0x1000>, + <0xdc000 0x100>, + <0x18454 0x4>; + interrupts = ; clocks = <&gateclk 17>; mrvl,clk-delay-cycles = <0x1F>; status = "disabled"; @@ -578,7 +585,7 @@ mainpll: mainpll { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <2000000000>; + clock-frequency = <1000000000>; }; /* 25 MHz reference crystal */ diff --git a/arch/arm/boot/dts/armada-390.dtsi b/arch/arm/boot/dts/armada-390.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..094e39c660390440501dce7e64dfdda4b8268a37 --- /dev/null +++ b/arch/arm/boot/dts/armada-390.dtsi @@ -0,0 +1,57 @@ +/* + * Device Tree Include file for Marvell Armada 390 SoC. + * + * Copyright (C) 2015 Marvell + * + * Thomas Petazzoni + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "armada-39x.dtsi" + +/ { + soc { + internal-regs { + pinctrl@18000 { + compatible = "marvell,mv88f6920-pinctrl"; + reg = <0x18000 0x20>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts new file mode 100644 index 0000000000000000000000000000000000000000..bbf83756c43c3b8fe9358de92ba6019221096f8c --- /dev/null +++ b/arch/arm/boot/dts/armada-398-db.dts @@ -0,0 +1,153 @@ +/* + * Device Tree Include file for Marvell Armada 398 Development Board + * + * Copyright (C) 2015 Marvell + * + * Thomas Petazzoni + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-398.dtsi" + +/ { + model = "Marvell Armada 398 Development Board"; + compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2 GB */ + }; + + soc { + ranges = ; + + internal-regs { + spi@10680 { + status = "okay"; + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "n25q128a13"; + reg = <0>; + spi-max-frequency = <108000000>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x400000>; + }; + + partition@400000 { + label = "Filesystem"; + reg = <0x400000 0x1000000>; + }; + }; + }; + + i2c@11000 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; + clock-frequency = <100000>; + }; + + serial@12000 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + serial@12100 { + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + flash@d0000 { + status = "okay"; + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition@800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; + }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + + pcie@2,0 { + status = "okay"; + }; + + pcie@3,0 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-398.dtsi b/arch/arm/boot/dts/armada-398.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..fdc25914e3a3936a41e5421f4200040c06f5a83e --- /dev/null +++ b/arch/arm/boot/dts/armada-398.dtsi @@ -0,0 +1,60 @@ +/* + * Device Tree Include file for Marvell Armada 398 SoC. + * + * Copyright (C) 2015 Marvell + * + * Thomas Petazzoni + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "armada-39x.dtsi" + +/ { + compatible = "marvell,armada398", "marvell,armada390"; + + soc { + internal-regs { + pinctrl@18000 { + compatible = "marvell,mv88f6928-pinctrl"; + reg = <0x18000 0x20>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..ecd1318109bac8fb5d1e29c96f7c30779d217fda --- /dev/null +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -0,0 +1,508 @@ +/* + * Device Tree Include file for Marvell Armada 39x family of SoCs. + * + * Copyright (C) 2015 Marvell + * + * Thomas Petazzoni + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "skeleton.dtsi" +#include +#include + +#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) + +/ { + model = "Marvell Armada 39x family SoC"; + compatible = "marvell,armada390"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "marvell,armada-390-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + soc { + compatible = "marvell,armada390-mbus", "marvell,armadaxp-mbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + controller = <&mbusc>; + interrupt-parent = <&gic>; + pcie-mem-aperture = <0xe0000000 0x8000000>; + pcie-io-aperture = <0xe8000000 0x100000>; + + bootrom { + compatible = "marvell,bootrom"; + reg = ; + }; + + internal-regs { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; + + L2: cache-controller@8000 { + compatible = "arm,pl310-cache"; + reg = <0x8000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + scu@c000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xc000 0x100>; + }; + + timer@c600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xc600 0x20>; + interrupts = ; + clocks = <&coreclk 2>; + }; + + gic: interrupt-controller@d000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #size-cells = <0>; + interrupt-controller; + reg = <0xd000 0x1000>, + <0xc100 0x100>; + }; + + spi0: spi@10600 { + compatible = "marvell,orion-spi"; + reg = <0x10600 0x50>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = ; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + spi1: spi@10680 { + compatible = "marvell,orion-spi"; + reg = <0x10680 0x50>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = ; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + i2c0: i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + timeout-ms = <1000>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + i2c1: i2c@11100 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + timeout-ms = <1000>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + i2c2: i2c@11200 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11200 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + timeout-ms = <1000>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + i2c3: i2c@11300 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11300 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + timeout-ms = <1000>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + uart0: serial@12000 { + compatible = "snps,dw-apb-uart"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = ; + reg-io-width = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + uart1: serial@12100 { + compatible = "snps,dw-apb-uart"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = ; + reg-io-width = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + uart2: serial@12200 { + compatible = "snps,dw-apb-uart"; + reg = <0x12200 0x100>; + reg-shift = <2>; + interrupts = ; + reg-io-width = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + uart3: serial@12300 { + compatible = "snps,dw-apb-uart"; + reg = <0x12300 0x100>; + reg-shift = <2>; + interrupts = ; + reg-io-width = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + pinctrl@18000 { + i2c0_pins: i2c0-pins { + marvell,pins = "mpp2", "mpp3"; + marvell,function = "i2c0"; + }; + + uart0_pins: uart0-pins { + marvell,pins = "mpp0", "mpp1"; + marvell,function = "ua0"; + }; + + uart1_pins: uart1-pins { + marvell,pins = "mpp19", "mpp20"; + marvell,function = "ua1"; + }; + + spi1_pins: spi1-pins { + marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59"; + marvell,function = "spi1"; + }; + + nand_pins: nand-pins { + marvell,pins = "mpp22", "mpp34", "mpp23", "mpp33", + "mpp38", "mpp28", "mpp40", "mpp42", + "mpp35", "mpp36", "mpp25", "mpp30", + "mpp32"; + marvell,function = "dev"; + }; + }; + + system-controller@18200 { + compatible = "marvell,armada-390-system-controller", + "marvell,armada-370-xp-system-controller"; + reg = <0x18200 0x100>; + }; + + gateclk: clock-gating-control@18220 { + compatible = "marvell,armada-390-gating-clock"; + reg = <0x18220 0x4>; + clocks = <&coreclk 0>; + #clock-cells = <1>; + }; + + coreclk: mvebu-sar@18600 { + compatible = "marvell,armada-390-core-clock"; + reg = <0x18600 0x04>; + #clock-cells = <1>; + }; + + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>; + }; + + mpic: interrupt-controller@20a00 { + compatible = "marvell,mpic"; + reg = <0x20a00 0x2d0>, <0x21070 0x58>; + #interrupt-cells = <1>; + #size-cells = <1>; + interrupt-controller; + msi-controller; + interrupts = ; + }; + + timer@20300 { + compatible = "marvell,armada-380-timer", + "marvell,armada-xp-timer"; + reg = <0x20300 0x30>, <0x21040 0x30>; + interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <&mpic 5>, + <&mpic 6>; + clocks = <&coreclk 2>, <&coreclk 5>; + clock-names = "nbclk", "fixed"; + }; + + cpurst@20800 { + compatible = "marvell,armada-370-cpu-reset"; + reg = <0x20800 0x10>; + }; + + pmsu@22000 { + compatible = "marvell,armada-390-pmsu", + "marvell,armada-380-pmsu"; + reg = <0x22000 0x1000>; + }; + + xor@60800 { + compatible = "marvell,orion-xor"; + reg = <0x60800 0x100 + 0x60a00 0x100>; + clocks = <&gateclk 22>; + status = "okay"; + + xor00 { + interrupts = ; + dmacap,memcpy; + dmacap,xor; + }; + xor01 { + interrupts = ; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; + + xor@60900 { + compatible = "marvell,orion-xor"; + reg = <0x60900 0x100 + 0x60b00 0x100>; + clocks = <&gateclk 28>; + status = "okay"; + + xor10 { + interrupts = ; + dmacap,memcpy; + dmacap,xor; + }; + xor11 { + interrupts = ; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; + + flash@d0000 { + compatible = "marvell,armada370-nand"; + reg = <0xd0000 0x54>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = ; + clocks = <&coredivclk 0>; + status = "disabled"; + }; + + sdhci@d8000 { + compatible = "marvell,armada-380-sdhci"; + reg = <0xd8000 0x1000>, <0xdc000 0x100>; + interrupts = ; + clocks = <&gateclk 17>; + mrvl,clk-delay-cycles = <0x1F>; + status = "disabled"; + }; + + coredivclk: clock@e4250 { + compatible = "marvell,armada-390-corediv-clock", + "marvell,armada-380-corediv-clock"; + reg = <0xe4250 0xc>; + #clock-cells = <1>; + clocks = <&mainpll>; + clock-output-names = "nand"; + }; + }; + + pcie-controller { + compatible = "marvell,armada-370-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + msi-parent = <&mpic>; + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 + 0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 + 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 + 0x82000000 0x1 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO */ + 0x82000000 0x3 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */ + 0x81000000 0x3 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO */ + 0x82000000 0x4 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */ + 0x81000000 0x4 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO */>; + + /* + * This port can be either x4 or x1. When + * configured in x4 by the bootloader, then + * pcie@4,0 is not available. + */ + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + /* x1 port */ + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + /* x1 port */ + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 + 0x81000000 0 0 0x81000000 0x3 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + /* + * x1 port only available when pcie@1,0 is + * configured as a x1 port + */ + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 + 0x81000000 0 0 0x81000000 0x4 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + marvell,pcie-port = <3>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + }; + }; + + clocks { + /* 2 GHz fixed main PLL */ + mainpll: mainpll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index c1fbab2436095e28a72542abbe3111e1609e573d..dfd782b44e506b6fd34a8efbade76b9f94c001c6 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -59,7 +59,7 @@ compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 48bdafe17526ab7fa6960281cc2a7cdfdf2ee82e..1037824076189db621c58809ba539693be09e3e0 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -64,7 +64,7 @@ compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 206aebba01beea82a820163778bd4dc793cea05d..565227eacf06092d518d87cc2255a6e65093abaf 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -65,7 +65,7 @@ compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index 5fb3c8b687cfad7100f7a1827197cb7811dca39e..06a6a6c1fdf709446ed713fd189a1471e6509fd3 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -54,8 +54,7 @@ "marvell,armadaxp", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts new file mode 100644 index 0000000000000000000000000000000000000000..a2cf2154dcdb68d8374c2bea4b136fccaccb7aa2 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -0,0 +1,393 @@ +/* + * Device Tree file for the Linksys WRT1900AC (Mamba). + * + * Note: this board is shipped with a new generation boot loader that + * remaps internal registers at 0xf1000000. Therefore, if earlyprintk + * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option should be + * used. + * + * Copyright (C) 2014 Imre Kaloz + * + * Based on armada-xp-axpwifiap.dts: + * + * Copyright (C) 2013 Marvell + * + * Thomas Petazzoni + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include +#include +#include "armada-xp-mv78230.dtsi" + +/ { + model = "Linksys WRT1900AC"; + compatible = "linksys,mamba", "marvell,armadaxp-mv78230", + "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */ + }; + + soc { + ranges = ; + + pcie-controller { + status = "okay"; + + /* Etron EJ168 USB 3.0 controller */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* First mini-PCIe port */ + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + + /* Second mini-PCIe port */ + pcie@3,0 { + /* Port 0, Lane 3 */ + status = "okay"; + }; + }; + + internal-regs { + + /* J10: VCC, NC, RX, NC, TX, GND */ + serial@12000 { + status = "okay"; + }; + + sata@a0000 { + nr-ports = <1>; + status = "okay"; + }; + + ethernet@70000 { + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + /* USB part of the eSATA/USB 2.0 port */ + usb@50000 { + status = "okay"; + }; + + i2c@11000 { + status = "okay"; + clock-frequency = <100000>; + + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; + + tlc59116@68 { + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <2>; + compatible = "ti,tlc59116"; + reg = <0x68>; + + wan_amber@0 { + label = "mamba:amber:wan"; + reg = <0x0>; + }; + + wan_white@1 { + label = "mamba:white:wan"; + reg = <0x1>; + }; + + wlan_2g@2 { + label = "mamba:white:wlan_2g"; + reg = <0x2>; + }; + + wlan_5g@3 { + label = "mamba:white:wlan_5g"; + reg = <0x3>; + }; + + esata@4 { + label = "mamba:white:esata"; + reg = <0x4>; + }; + + usb2@5 { + label = "mamba:white:usb2"; + reg = <0x5>; + }; + + usb3_1@6 { + label = "mamba:white:usb3_1"; + reg = <0x6>; + }; + + usb3_2@7 { + label = "mamba:white:usb3_2"; + reg = <0x7>; + }; + + wps_white@8 { + label = "mamba:white:wps"; + reg = <0x8>; + }; + + wps_amber@9 { + label = "mamba:amber:wps"; + reg = <0x9>; + }; + }; + }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; /* 1MB */ + read-only; + }; + + partition@100000 { + label = "u_env"; + reg = <0x100000 0x40000>; /* 256KB */ + }; + + partition@140000 { + label = "s_env"; + reg = <0x140000 0x40000>; /* 256KB */ + }; + + partition@900000 { + label = "devinfo"; + reg = <0x900000 0x100000>; /* 1MB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@a00000 { + label = "kernel1"; + reg = <0xa00000 0x2800000>; /* 40MB */ + }; + + partition@d00000 { + label = "rootfs1"; + reg = <0xd00000 0x2500000>; /* 37MB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@3200000 { + label = "kernel2"; + reg = <0x3200000 0x2800000>; /* 40MB */ + }; + + partition@3500000 { + label = "rootfs2"; + reg = <0x3500000 0x2500000>; /* 37MB */ + }; + + /* + * 38MB, last MB is for the BBT, not writable + */ + partition@5a00000 { + label = "syscfg"; + reg = <0x5a00000 0x2600000>; + }; + + /* + * Unused area between "s_env" and "devinfo". + * Moved here because otherwise the renumbered + * partitions would break the bootloader + * supplied bootargs + */ + partition@180000 { + label = "unused_area"; + reg = <0x180000 0x780000>; /* 7.5MB */ + }; + }; + + spi0: spi@10600 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "everspin,mr25h256"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <40000000>; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&keys_pin>; + pinctrl-names = "default"; + + button@1 { + label = "WPS"; + linux,code = ; + gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + }; + + button@2 { + label = "Factory Reset Button"; + linux,code = ; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&power_led_pin>; + pinctrl-names = "default"; + + power { + label = "mamba:white:power"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + gpio_fan { + /* SUNON HA4010V4-0000-C99 */ + compatible = "gpio-fan"; + gpios = <&gpio0 24 0>; + + gpio-fan,speed-map = <0 0 + 4500 1>; + }; + + dsa@0 { + compatible = "marvell,dsa"; + #address-cells = <2>; + #size-cells = <0>; + + dsa,ethernet = <ð0>; + dsa,mii-bus = <&mdio>; + + switch@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0>; /* MDIO address 0, switch 0 in tree */ + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "internet"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + }; + }; + }; +}; + +&pinctrl { + + keys_pin: keys-pin { + marvell,pins = "mpp32", "mpp33"; + marvell,function = "gpio"; + }; + + power_led_pin: power-led-pin { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + gpio_fan_pin: gpio-fan-pin { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts index 56f958eb1ede07fb379f051ef12385ed5d1164d9..f894bc83e957554a55a8a155cc0cdb0c1d1d0d0e 100644 --- a/arch/arm/boot/dts/armada-xp-matrix.dts +++ b/arch/arm/boot/dts/armada-xp-matrix.dts @@ -52,7 +52,7 @@ compatible = "marvell,axp-matrix", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 4a7cbed79b0736f9c42670a6316bb4fadb37d398..8479fdc9e9c2468e072c3592528a263610c2acc1 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -57,7 +57,6 @@ gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; - eth3 = ð3; }; cpus { diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 36ce63a96cc9007bf18de678d117bbd99a78b739..661d54c815802d1bb1d2e1fa31cb255d90caf12e 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -57,7 +57,6 @@ gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; - eth3 = ð3; }; diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index 99cb9a8401b40737287ae15dbe7e67c0ffb2619d..1516fc2627f99f0d068fbc2d96c897c9112dc0e7 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -53,7 +53,7 @@ compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 0c76d9f05fd0c2e006df84f3fe7671a8ed29b52b..990e8a2100f0f3cff6c50989761d6b78838e4bd8 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -54,7 +54,7 @@ compatible = "plathome,openblocks-ax3-4", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { @@ -105,6 +105,10 @@ }; internal-regs { + rtc@10300 { + /* No crystal connected to the internal RTC */ + status = "disabled"; + }; serial@12000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index e9fb225169aaa7338e532006b7986779537da7ef..6063428fa6a0a8ca378d1a9f00b5689544947758 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -67,8 +67,7 @@ "marvell,armadaxp", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 82917236a2fbfe99426b5a70127255848a917d6a..013d63f69e361e60bbe96466bec1883388155889 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -57,7 +57,8 @@ compatible = "marvell,armadaxp", "marvell,armada-370-xp"; aliases { - eth2 = ð2; + serial2 = &uart2; + serial3 = &uart3; }; soc { @@ -78,6 +79,7 @@ compatible = "marvell,aurora-system-cache"; reg = <0x08000 0x1000>; cache-id-part = <0x100>; + cache-level = <2>; cache-unified; wt-override; }; @@ -149,11 +151,11 @@ cpuclk: clock-complex@18700 { #clock-cells = <1>; compatible = "marvell,armada-xp-cpu-clock"; - reg = <0x18700 0xA0>, <0x1c054 0x10>; + reg = <0x18700 0x24>, <0x1c054 0x10>; clocks = <&coreclk 1>; }; - interrupt-controller@20000 { + interrupt-controller@20a00 { reg = <0x20a00 0x2d0>, <0x21070 0x58>; }; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index fec1fca2ad66c80ad3ce949d82741b235790c1ed..9991240b7438663d184b6fa31eb04efb36fc3bdc 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -167,7 +167,13 @@ macb1: ethernet@f802c000 { phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + }; }; dbgu: serial@ffffee00 { @@ -188,6 +194,11 @@ ; }; + pinctrl_key_gpio: key_gpio_0 { + atmel,pins = + ; + }; + pinctrl_mmc0_cd: mmc0_cd { atmel,pins = ; @@ -276,6 +287,9 @@ gpio_keys { compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio>; + bp3 { label = "PB_USER"; gpios = <&pioE 29 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts new file mode 100644 index 0000000000000000000000000000000000000000..c740e1a2a3a5cac2c4d5bbe284815f2a705c8e17 --- /dev/null +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -0,0 +1,241 @@ +/* + * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board + * + * Copyright (C) 2015 Atmel, + * 2015 Josh Wu + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; +#include "sama5d4.dtsi" + +/ { + model = "Atmel SAMA5D4 Xplained"; + compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5"; + + chosen { + bootargs = "console=ttyS0,115200 ignore_loglevel earlyprintk"; + }; + + memory { + reg = <0x20000000 0x20000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + spi0: spi@f8010000 { + cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; + status = "okay"; + m25p80@0 { + compatible = "atmel,at25df321a"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; + + i2c0: i2c@f8014000 { + status = "okay"; + }; + + macb0: ethernet@f8020000 { + phy-mode = "rmii"; + status = "okay"; + + phy0: ethernet-phy@1 { + interrupt-parent = <&pioE>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + reg = <1>; + }; + }; + + mmc1: mmc@fc000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 3 0>; + }; + }; + + usart3: serial@fc00c000 { + status = "okay"; + }; + + usart4: serial@fc010000 { + status = "okay"; + }; + + adc0: adc@fc034000 { + atmel,adc-vref = <3300>; + status = "okay"; + }; + + watchdog@fc068640 { + status = "okay"; + }; + + pinctrl@fc06a000 { + board { + pinctrl_mmc1_cd: mmc1_cd { + atmel,pins = + ; + }; + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + ; + }; + pinctrl_key_gpio: key_gpio_0 { + atmel,pins = + ; + }; + }; + }; + }; + + usb0: gadget@00400000 { + atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; + }; + + usb1: ohci@00500000 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioE 11 GPIO_ACTIVE_HIGH + &pioE 14 GPIO_ACTIVE_HIGH + >; + status = "okay"; + }; + + usb2: ehci@00600000 { + status = "okay"; + }; + + nand0: nand@80000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + atmel,has-pmecc; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio>; + + pb_user1 { + label = "pb_user1"; + gpios = <&pioE 8 GPIO_ACTIVE_HIGH>; + linux,code = <0x100>; + gpio-key,wakeup; + }; + }; + + leds { + compatible = "gpio-leds"; + status = "okay"; + + d8 { + label = "d8"; + gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + d10 { + label = "d10"; + gpios = <&pioE 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 9198b719d0ef24d0ab4bef18ca7fd67a61dfd1df..89ef4a540db583015c2825d453e867afd9195852 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -115,6 +115,10 @@ }; }; + ssc0: ssc@f8008000 { + status = "okay"; + }; + spi0: spi@f8010000 { cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; status = "okay"; @@ -127,6 +131,13 @@ i2c0: i2c@f8014000 { status = "okay"; + + wm8904: codec@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + clocks = <&pck2>; + clock-names = "mclk"; + }; }; macb0: ethernet@f8020000 { @@ -171,6 +182,10 @@ atmel,pins = ; }; + pinctrl_pck2_as_audio_mck: pck2_as_audio_mck { + atmel,pins = + ; + }; pinctrl_usba_vbus: usba_vbus { atmel,pins = ; @@ -244,8 +259,6 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio>; @@ -257,4 +270,42 @@ gpio-key,wakeup; }; }; + + leds { + compatible = "gpio-leds"; + status = "okay"; + + d8 { + label = "d8"; + /* PE28, conflicts with usart4 rts pin */ + gpios = <&pioE 28 GPIO_ACTIVE_LOW>; + }; + + d9 { + label = "d9"; + gpios = <&pioE 9 GPIO_ACTIVE_HIGH>; + }; + + d10 { + label = "d10"; + gpios = <&pioE 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + sound { + compatible = "atmel,asoc-wm8904"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck2_as_audio_mck>; + + atmel,model = "wm8904 @ SAMA5D4EK"; + atmel,audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN1L", "Line In Jack", + "IN1R", "Line In Jack"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8904>; + }; }; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 21c2b504f977d16088ce290386ba73ddb4333b6b..4fb333bd1f85f10dcce81e953cf232f1ab14c74f 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -356,9 +356,13 @@ }; st: timer@fffffd00 { - compatible = "atmel,at91rm9200-st"; + compatible = "atmel,at91rm9200-st", "syscon", "simple-mfd"; reg = <0xfffffd00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + + watchdog { + compatible = "atmel,at91rm9200-wdt"; + }; }; rtc: rtc@fffffe00 { @@ -830,7 +834,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91rm9200-usart"; + compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index e7f0a4ae271c6a53244c3a3b0f6204cae45d6b0b..d88fe62a2b2e12e41aaeb8058d028b7fa89cd788 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -753,7 +753,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; @@ -842,7 +842,7 @@ }; macb0: ethernet@fffc4000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; + compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xfffc4000 0x100>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index d55fdf2487ef53f7a3c68cded4e78fe42039f538..bf8d1856a55a55a3668bd69879df1ef2c8d1dd26 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -276,7 +276,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index fce301c4e9d6e22aeb37d3a2a4fe83bf6634ad78..111889b556cf1e2f52ce002995c20a0e00db8914 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -762,7 +762,7 @@ }; dbgu: serial@ffffee00 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; @@ -845,7 +845,7 @@ }; macb0: ethernet@fffbc000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; + compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi index 17b879990914c8643bfc63cb98b634c112f4f454..a7da0dd0c98fa0af8d05ad545660aba426962c30 100644 --- a/arch/arm/boot/dts/at91sam9g25.dtsi +++ b/arch/arm/boot/dts/at91sam9g25.dtsi @@ -7,6 +7,7 @@ */ #include "at91sam9x5.dtsi" +#include "at91sam9x5_isi.dtsi" #include "at91sam9x5_usart3.dtsi" #include "at91sam9x5_macb0.dtsi" diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 1e4c49c584d38a5115b817efc57f3934681e011e..707fd4ea58f5d425bce8df2f2097f31ca0c2ae20 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -16,10 +16,28 @@ ahb { apb { + spi0: spi@f0000000 { + status = "disabled"; + }; + + mmc1: mmc@f000c000 { + status = "disabled"; + }; + + i2c0: i2c@f8010000 { + ov2640: camera@0x30 { + status = "okay"; + }; + }; + macb0: ethernet@f802c000 { phy-mode = "rmii"; status = "okay"; }; + + isi: isi@f8048000 { + status = "okay"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 488af63d5174c7e9dc0eb29319ccb35eebd8fc7c..70e59c5ceb2f7a56c5bd7e35d0cc9b34cf6a06a4 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -893,7 +893,7 @@ }; dbgu: serial@ffffee00 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; @@ -956,7 +956,7 @@ }; macb0: ethernet@fffbc000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; + compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 0c53a375ba99d214c1c0b5eabd85e77ec0cc72e6..a9e35dfc12d9d5a763e4484f8a331806da13ad63 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -757,7 +757,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; @@ -912,6 +912,15 @@ clocks = <&pwm_clk>; status = "disabled"; }; + + usb1: gadget@f803c000 { + compatible = "atmel,at91sam9260-udc"; + reg = <0xf803c000 0x4000>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&udphs_clk>, <&udpck>; + clock-names = "pclk", "hclk"; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 9575c0d895c919e0da00288192981ea299713f3e..6e067c8a350252de0d2cd66fd580d94aba0bda59 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -108,6 +108,13 @@ ; }; }; + + usb1 { + pinctrl_usb1_vbus_sense: usb1_vbus_sense { + atmel,pins = + ; /* PB16 gpio usb vbus sense, no pull up and deglitch */ + }; + }; }; spi0: spi@f0000000 { @@ -120,9 +127,20 @@ }; }; + usb1: gadget@f803c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_vbus_sense>; + atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + watchdog@fffffe40 { status = "okay"; }; + + rtc@fffffeb0 { + status = "okay"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 40f645b8fe25699d51904e5bdcaba8251375686a..ebfd5ce9cb3867d52c821ca075906b57be86abe8 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -377,7 +377,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index d221179d0f1aad8aaccde552f74962a3009c6274..3aa56ae3410a5f96692df4d0f9f04238e2c06469 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -860,7 +860,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/at91sam9x5_isi.dtsi index 98bc877a68ef0d697f46f3e43fe83fef6c1d7d0a..8fc45ca4dcb58a0d8d2e7a086e7437df330b6259 100644 --- a/arch/arm/boot/dts/at91sam9x5_isi.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_isi.dtsi @@ -13,6 +13,37 @@ / { ahb { apb { + pinctrl@fffff400 { + isi { + pinctrl_isi_data_0_7: isi-0-data-0-7 { + atmel,pins = + ; /* ISI_VSYNC, conflicts with LCDDAT13 */ + }; + + pinctrl_isi_data_8_9: isi-0-data-8-9 { + atmel,pins = + ; /* ISI_D9, conflicts with LCDDAT9 */ + }; + + pinctrl_isi_data_10_11: isi-0-data-10-11 { + atmel,pins = + ; /* ISI_D11, conflicts with LCDDAT11 */ + }; + }; + }; + pmc: pmc@fffffc00 { periphck { isi_clk: isi_clk { @@ -21,6 +52,21 @@ }; }; }; + + isi: isi@f8048000 { + compatible = "atmel,at91sam9g45-isi"; + reg = <0xf8048000 0x4000>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_isi_data_0_7>; + clocks = <&isi_clk>; + clock-names = "isi_clk"; + status = "disabled"; + port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi index 57e89d1d03253fd64af8f4c01f807caf9611dfaf..73d7e30965badd14366540fe2cb9ce6780d67f2e 100644 --- a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi @@ -53,7 +53,7 @@ }; macb0: ethernet@f802c000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; + compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi index 663676c02861ff2e35118f5526d36847edb904e0..d81980c40c7d05a7525fcb1b9f1b09892325dc26 100644 --- a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi @@ -41,7 +41,7 @@ }; macb1: ethernet@f8030000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; + compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xf8030000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 229d6c24a9c408c37d5dcb46b279d457768b173d..26112ebd15fc4e896d576932b330b846fc4cc397 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -42,6 +42,10 @@ }; }; }; + + rtc@fffffeb0 { + status = "okay"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index bd16bd360272ae212cc0a86c10dde6b697c3c31b..cc83a37a7311ba55e2e717ad789d040f65fe98f1 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -59,6 +59,16 @@ status = "okay"; }; + isi: isi@f8048000 { + status = "disabled"; + port { + isi_0: endpoint@0 { + remote-endpoint = <&ov2640_0>; + bus-width = <8>; + }; + }; + }; + i2c0: i2c@f8010000 { status = "okay"; @@ -66,9 +76,47 @@ compatible = "wm8731"; reg = <0x1a>; }; + + ov2640: camera@0x30 { + compatible = "ovti,ov2640"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; + resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>; + pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>; + clocks = <&pck0>; + clock-names = "xvclk"; + assigned-clocks = <&pck0>; + assigned-clock-rates = <25000000>; + status = "disabled"; + + port { + ov2640_0: endpoint { + remote-endpoint = <&isi_0>; + bus-width = <8>; + }; + }; + }; }; pinctrl@fffff400 { + camera_sensor { + pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 { + atmel,pins = + ; /* ISI_MCK */ + }; + + pinctrl_sensor_power: sensor_power-0 { + atmel,pins = + ; + }; + + pinctrl_sensor_reset: sensor_reset-0 { + atmel,pins = + ; + }; + }; + mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index ff5fb6ab0b9748dbecd27fd7432c4f8306f5221d..7b52c33ea69aedefa667a9a96460a6d5cb4fefc4 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -54,6 +54,42 @@ /include/ "bcm-cygnus-clock.dtsi" + pinctrl: pinctrl@0x0301d0c8 { + compatible = "brcm,cygnus-pinmux"; + reg = <0x0301d0c8 0x30>, + <0x0301d24c 0x2c>; + }; + + gpio_crmu: gpio@03024800 { + compatible = "brcm,cygnus-crmu-gpio"; + reg = <0x03024800 0x50>, + <0x03024008 0x18>; + #gpio-cells = <2>; + gpio-controller; + }; + + gpio_ccm: gpio@1800a000 { + compatible = "brcm,cygnus-ccm-gpio"; + reg = <0x1800a000 0x50>, + <0x0301d164 0x20>; + #gpio-cells = <2>; + gpio-controller; + interrupts = ; + interrupt-controller; + }; + + gpio_asiu: gpio@180a5000 { + compatible = "brcm,cygnus-asiu-gpio"; + reg = <0x180a5000 0x668>; + #gpio-cells = <2>; + gpio-controller; + + pinmux = <&pinctrl>; + + interrupt-controller; + interrupts = ; + }; + amba { #address-cells = <1>; #size-cells = <1>; @@ -90,6 +126,48 @@ status = "disabled"; }; + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18012000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; + + linux,pci-domain = <0>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x28000000 0 0x00010000 + 0x82000000 0 0x20000000 0x20000000 0 0x04000000>; + + status = "disabled"; + }; + + pcie1: pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18013000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; + + linux,pci-domain = <1>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x48000000 0 0x00010000 + 0x82000000 0 0x40000000 0x40000000 0 0x04000000>; + + status = "disabled"; + }; + uart0: serial@18020000 { compatible = "snps,dw-apb-uart"; reg = <0x18020000 0x100>; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index f18c9d9b2f2c78c616e859574626fa62489e7aa1..2ed9e5794785fb9a8f3e08228fb999e245c4d8de 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -45,13 +45,13 @@ power0 { label = "bcm53xx:green:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; + linux,default-trigger = "default-on"; }; power1 { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; + linux,default-trigger = "default-off"; }; usb { diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts new file mode 100644 index 0000000000000000000000000000000000000000..ea26dd3ec03a099a7a62d7b1659550da2df88e3a --- /dev/null +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -0,0 +1,77 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Netgear R8000 + * + * Copyright (C) 2015 Rafał Miłecki + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" + +/ { + compatible = "netgear,r8000", "brcm,bcm4709", "brcm,bcm4708"; + model = "Netgear R8000 (BCM4709)"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + power0 { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + power1 { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 5ghz-1 { + label = "bcm53xx:white:5ghz-1"; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + rfkill { + label = "WiFi"; + linux,code = ; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi index 0ca0f4e523d0adf4d6d2eac08482544f60dcbd67..39ac7840d7eebfafd5be58dc2b3fa5c5b9d6c63b 100644 --- a/arch/arm/boot/dts/bcm7445.dtsi +++ b/arch/arm/boot/dts/bcm7445.dtsi @@ -76,7 +76,7 @@ reg-shift = <2>; reg-io-width = <4>; interrupts = ; - clock-frequency = <0x4d3f640>; + clock-frequency = <81000000>; }; sun_top_ctrl: syscon@404000 { @@ -96,6 +96,18 @@ "syscon"; reg = <0x452000 0x100>; }; + + irq0_intc: interrupt-controller@40a780 { + compatible = "brcm,bcm7120-l2-intc"; + interrupt-parent = <&gic>; + #interrupt-cells = <1>; + reg = <0x40a780 0x8>; + interrupt-controller; + interrupts = , + ; + brcm,int-map-mask = <0x25c>, <0x7000000>; + brcm,int-fwd-mask = <0x70000>; + }; }; smpboot { diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts index d2ee952805488df5c410fad41ccbf2d66d4d45e7..7db484323fd62dc7ed9a988e6a3008597f59467f 100644 --- a/arch/arm/boot/dts/bcm911360_entphn.dts +++ b/arch/arm/boot/dts/bcm911360_entphn.dts @@ -33,6 +33,7 @@ /dts-v1/; #include "bcm-cygnus.dtsi" +#include "dt-bindings/input/input.h" / { model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)"; @@ -50,4 +51,16 @@ uart3: serial@18023000 { status = "okay"; }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + hook { + label = "HOOK"; + linux,code = ; + gpios = <&gpio_asiu 48 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts index f1bb36f3975ca3c356639d3c58424a613eab5257..c9eb8565eac5be2b3d0299218919b4a8a918bd94 100644 --- a/arch/arm/boot/dts/bcm958300k.dts +++ b/arch/arm/boot/dts/bcm958300k.dts @@ -47,6 +47,14 @@ bootargs = "console=ttyS0,115200"; }; + pcie0: pcie@18012000 { + status = "okay"; + }; + + pcie1: pcie@18013000 { + status = "okay"; + }; + uart3: serial@18023000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts new file mode 100644 index 0000000000000000000000000000000000000000..56b429abbedb9c1139d85dec79c5b1baf49ffd73 --- /dev/null +++ b/arch/arm/boot/dts/bcm958305k.dts @@ -0,0 +1,53 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-cygnus.dtsi" + +/ { + model = "Cygnus Wireless Audio (BCM958305K)"; + compatible = "brcm,bcm58305", "brcm,cygnus"; + + aliases { + serial0 = &uart3; + }; + + chosen { + stdout-path = &uart3; + bootargs = "console=ttyS0,115200"; + }; + + uart3: serial@18023000 { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index afe678f6d2e950308b74e403d26a3cc326c2b760..169a85578fc93e31927c10ce381b9407a484fe38 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -29,10 +29,10 @@ &dm816x_pinmux { mcspi1_pins: pinmux_mcspi1_pins { pinctrl-single,pins = < - DM816X_IOPAD(0x0a94, PIN_INPUT | MUX_MODE0) /* SPI_SCLK */ - DM816X_IOPAD(0x0a98, PIN_OUTPUT | MUX_MODE0) /* SPI_SCS0 */ - DM816X_IOPAD(0x0aa8, PIN_INPUT | MUX_MODE0) /* SPI_D0 */ - DM816X_IOPAD(0x0aac, PIN_INPUT | MUX_MODE0) /* SPI_D1 */ + DM816X_IOPAD(0x0a94, MUX_MODE0) /* SPI_SCLK */ + DM816X_IOPAD(0x0a98, MUX_MODE0) /* SPI_SCS0 */ + DM816X_IOPAD(0x0aa8, MUX_MODE0) /* SPI_D0 */ + DM816X_IOPAD(0x0aac, MUX_MODE0) /* SPI_D1 */ >; }; @@ -52,13 +52,13 @@ usb0_pins: pinmux_usb0_pins { pinctrl-single,pins = < - DM816X_IOPAD(0x0d00, MUX_MODE0) /* USB0_DRVVBUS */ + DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB0_DRVVBUS */ >; }; - usb1_pins: pinmux_usb0_pins { + usb1_pins: pinmux_usb1_pins { pinctrl-single,pins = < - DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB1_DRVVBUS */ + DM816X_IOPAD(0x0d08, MUX_MODE0) /* USB1_DRVVBUS */ >; }; }; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index f35715bc69922591577299730ecf1a105c6642de..de8427be830a32e24a01ace97f11303435528b7b 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -396,6 +396,29 @@ mentor,num-eps = <16>; mentor,ram-bits = <12>; mentor,power = <500>; + + dmas = <&cppi41dma 0 0 &cppi41dma 1 0 + &cppi41dma 2 0 &cppi41dma 3 0 + &cppi41dma 4 0 &cppi41dma 5 0 + &cppi41dma 6 0 &cppi41dma 7 0 + &cppi41dma 8 0 &cppi41dma 9 0 + &cppi41dma 10 0 &cppi41dma 11 0 + &cppi41dma 12 0 &cppi41dma 13 0 + &cppi41dma 14 0 &cppi41dma 0 1 + &cppi41dma 1 1 &cppi41dma 2 1 + &cppi41dma 3 1 &cppi41dma 4 1 + &cppi41dma 5 1 &cppi41dma 6 1 + &cppi41dma 7 1 &cppi41dma 8 1 + &cppi41dma 9 1 &cppi41dma 10 1 + &cppi41dma 11 1 &cppi41dma 12 1 + &cppi41dma 13 1 &cppi41dma 14 1>; + dma-names = + "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", + "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", + "rx14", "rx15", + "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", + "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", + "tx14", "tx15"; }; usb1: usb@47401800 { @@ -413,6 +436,43 @@ mentor,num-eps = <16>; mentor,ram-bits = <12>; mentor,power = <500>; + + dmas = <&cppi41dma 15 0 &cppi41dma 16 0 + &cppi41dma 17 0 &cppi41dma 18 0 + &cppi41dma 19 0 &cppi41dma 20 0 + &cppi41dma 21 0 &cppi41dma 22 0 + &cppi41dma 23 0 &cppi41dma 24 0 + &cppi41dma 25 0 &cppi41dma 26 0 + &cppi41dma 27 0 &cppi41dma 28 0 + &cppi41dma 29 0 &cppi41dma 15 1 + &cppi41dma 16 1 &cppi41dma 17 1 + &cppi41dma 18 1 &cppi41dma 19 1 + &cppi41dma 20 1 &cppi41dma 21 1 + &cppi41dma 22 1 &cppi41dma 23 1 + &cppi41dma 24 1 &cppi41dma 25 1 + &cppi41dma 26 1 &cppi41dma 27 1 + &cppi41dma 28 1 &cppi41dma 29 1>; + dma-names = + "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", + "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", + "rx14", "rx15", + "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", + "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", + "tx14", "tx15"; + }; + + cppi41dma: dma-controller@47402000 { + compatible = "ti,am3359-cppi41"; + reg = <0x47400000 0x1000 + 0x47402000 0x1000 + 0x47403000 0x1000 + 0x47404000 0x4000>; + reg-names = "glue", "controller", "scheduler", "queuemgr"; + interrupts = <17>; + interrupt-names = "glue"; + #dma-cells = <2>; + #dma-channels = <30>; + #dma-requests = <256>; }; }; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index aae7efc09b0bd1ecd66e72193c6aefe107008b9e..e6fa251e17b93b54f67bcd39b8da57476ddda519 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -87,6 +87,7 @@ /* connect xtal input to 25MHz reference */ clocks = <&ref25>; + clock-names = "xtal"; /* connect xtal input as source of pll0 and pll1 */ silabs,pll-source = <0 0>, <1 0>; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index a5441d5482a63a0a9203f3333b96c87ec1912b11..9ad829523a1350d59bcc795286459d8dfc6c133e 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -1,5 +1,8 @@ /include/ "skeleton.dtsi" +#include +#include + #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { @@ -61,7 +64,7 @@ 0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 Mem */ 0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */ - pcie-port@0 { + pcie0: pcie-port@0 { device_type = "pci"; status = "disabled"; assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; @@ -79,7 +82,7 @@ interrupt-map = <0 0 0 0 &intc 16>; }; - pcie-port@1 { + pcie1: pcie-port@1 { device_type = "pci"; status = "disabled"; assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; @@ -154,7 +157,7 @@ uart2: serial@12200 { compatible = "ns16550a"; - reg = <0x12000 0x100>; + reg = <0x12200 0x100>; reg-shift = <2>; interrupts = <9>; clocks = <&core_clk 0>; @@ -163,7 +166,7 @@ uart3: serial@12300 { compatible = "ns16550a"; - reg = <0x12100 0x100>; + reg = <0x12300 0x100>; reg-shift = <2>; interrupts = <10>; clocks = <&core_clk 0>; @@ -448,6 +451,11 @@ marvell,function = "gpio"; }; + pmx_pcie1_clkreq: pmx-pcie1-clkreq { + marvell,pins = "mpp9"; + marvell,function = "pex1"; + }; + pmx_gpio_10: pmx-gpio-10 { marvell,pins = "mpp10"; marvell,function = "gpio"; @@ -458,6 +466,11 @@ marvell,function = "gpio"; }; + pmx_pcie0_clkreq: pmx-pcie0-clkreq { + marvell,pins = "mpp11"; + marvell,function = "pex0"; + }; + pmx_gpio_12: pmx-gpio-12 { marvell,pins = "mpp12"; marvell,function = "gpio"; @@ -563,6 +576,18 @@ marvell,function = "gpio"; }; + pmx_spi1_4_7: pmx-spi1-4-7 { + marvell,pins = "mpp4", "mpp5", + "mpp6", "mpp7"; + marvell,function = "spi1"; + }; + + pmx_spi1_20_23: pmx-spi1-20-23 { + marvell,pins = "mpp20", "mpp21", + "mpp22", "mpp23"; + marvell,function = "spi1"; + }; + pmx_uart1: pmx-uart1 { marvell,pins = "mpp_uart1"; marvell,function = "uart1"; @@ -582,6 +607,36 @@ marvell,pins = "mpp_nand"; marvell,function = "gpo"; }; + + pmx_i2c1: pmx-i2c1 { + marvell,pins = "mpp17", "mpp19"; + marvell,function = "twsi"; + }; + + pmx_i2c2: pmx-i2c2 { + marvell,pins = "mpp_audio1"; + marvell,function = "twsi"; + }; + + pmx_ssp_i2c2: pmx-ssp-i2c2 { + marvell,pins = "mpp_audio1"; + marvell,function = "ssp/twsi"; + }; + + pmx_i2cmux_0: pmx-i2cmux-0 { + marvell,pins = "twsi"; + marvell,function = "twsi-opt1"; + }; + + pmx_i2cmux_1: pmx-i2cmux-1 { + marvell,pins = "twsi"; + marvell,function = "twsi-opt2"; + }; + + pmx_i2cmux_2: pmx-i2cmux-2 { + marvell,pins = "twsi"; + marvell,function = "twsi-opt3"; + }; }; core_clk: core-clocks@d0214 { diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index b1bd06c6c2a801ee9c647cb63483430b8be60c44..aa465904f6cc420ecad93f006bc5e622d8e70b36 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -541,6 +541,14 @@ }; }; +&omap_dwc3_1 { + extcon = <&extcon_usb1>; +}; + +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; + &usb1 { dr_mode = "peripheral"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index a0afce7ad482cab69ce4c3935ef59536dd41c9d2..f03a091cd0766b606d0f3a61a4ab03c870f3dfcf 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -102,17 +102,101 @@ interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - prm: prm@4ae06000 { - compatible = "ti,dra7-prm"; - reg = <0x4ae06000 0x3000>; - interrupts = ; + l4_cfg: l4@4a000000 { + compatible = "ti,dra7-l4-cfg", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a000000 0x22c000>; - prm_clocks: clocks { + scm: scm@2000 { + compatible = "ti,dra7-scm-core", "simple-bus"; + reg = <0x2000 0x2000>; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; + ranges = <0 0x2000 0x2000>; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x1400>; + #address-cells = <1>; + #size-cells = <1>; + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0xe00 0x4>; + syscon = <&scm_conf>; + pbias_mmc_reg: pbias_mmc_omap5 { + regulator-name = "pbias_mmc_omap5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; + + dra7_pmx_core: pinmux@1400 { + compatible = "ti,dra7-padconf", + "pinctrl-single"; + reg = <0x1400 0x0464>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x3fffffff>; + }; + }; + + cm_core_aon: cm_core_aon@5000 { + compatible = "ti,dra7-cm-core-aon"; + reg = <0x5000 0x2000>; + + cm_core_aon_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm_core_aon_clockdomains: clockdomains { + }; + }; + + cm_core: cm_core@8000 { + compatible = "ti,dra7-cm-core"; + reg = <0x8000 0x3000>; + + cm_core_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm_core_clockdomains: clockdomains { + }; }; + }; - prm_clockdomains: clockdomains { + l4_wkup: l4@4ae00000 { + compatible = "ti,dra7-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4ae00000 0x3f000>; + + counter32k: counter@4000 { + compatible = "ti,omap-counter32k"; + reg = <0x4000 0x40>; + ti,hwmods = "counter_32k"; + }; + + prm: prm@6000 { + compatible = "ti,dra7-prm"; + reg = <0x6000 0x3000>; + interrupts = ; + + prm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prm_clockdomains: clockdomains { + }; }; }; @@ -185,36 +269,16 @@ }; }; - cm_core_aon: cm_core_aon@4a005000 { - compatible = "ti,dra7-cm-core-aon"; - reg = <0x4a005000 0x2000>; - - cm_core_aon_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm_core_aon_clockdomains: clockdomains { - }; - }; - - cm_core: cm_core@4a008000 { - compatible = "ti,dra7-cm-core"; - reg = <0x4a008000 0x3000>; - - cm_core_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm_core_clockdomains: clockdomains { - }; - }; - - counter32k: counter@4ae04000 { - compatible = "ti,omap-counter32k"; - reg = <0x4ae04000 0x40>; - ti,hwmods = "counter_32k"; + bandgap: bandgap@4a0021e0 { + reg = <0x4a0021e0 0xc + 0x4a00232c 0xc + 0x4a002380 0x2c + 0x4a0023C0 0x3c + 0x4a002564 0x8 + 0x4a002574 0x50>; + compatible = "ti,dra752-bandgap"; + interrupts = ; + #thermal-sensor-cells = <1>; }; dra7_ctrl_core: ctrl_core@4a002000 { @@ -227,28 +291,6 @@ reg = <0x4a002e00 0x7c>; }; - pbias_regulator: pbias_regulator { - compatible = "ti,pbias-omap"; - reg = <0 0x4>; - syscon = <&dra7_ctrl_general>; - pbias_mmc_reg: pbias_mmc_omap5 { - regulator-name = "pbias_mmc_omap5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - }; - }; - - dra7_pmx_core: pinmux@4a003400 { - compatible = "ti,dra7-padconf", "pinctrl-single"; - reg = <0x4a003400 0x0464>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x3fffffff>; - }; - sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; @@ -666,7 +708,6 @@ reg = <0x48820000 0x80>; interrupts = ; ti,hwmods = "timer5"; - ti,timer-dsp; }; timer6: timer@48822000 { @@ -674,8 +715,6 @@ reg = <0x48822000 0x80>; interrupts = ; ti,hwmods = "timer6"; - ti,timer-dsp; - ti,timer-pwm; }; timer7: timer@48824000 { @@ -683,7 +722,6 @@ reg = <0x48824000 0x80>; interrupts = ; ti,hwmods = "timer7"; - ti,timer-dsp; }; timer8: timer@48826000 { @@ -691,8 +729,6 @@ reg = <0x48826000 0x80>; interrupts = ; ti,hwmods = "timer8"; - ti,timer-dsp; - ti,timer-pwm; }; timer9: timer@4803e000 { @@ -714,7 +750,6 @@ reg = <0x48088000 0x80>; interrupts = ; ti,hwmods = "timer11"; - ti,timer-pwm; }; timer13: timer@48828000 { @@ -876,7 +911,7 @@ ti,clock-cycles = <16>; reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>, - <0x4ae06014 0x4>, <0x4a003b20 0x8>, + <0x4ae06014 0x4>, <0x4a003b20 0xc>, <0x4ae0c158 0x4>; reg-names = "setup-address", "control-address", "int-address", "efuse-address", @@ -909,7 +944,7 @@ ti,clock-cycles = <16>; reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>, - <0x4ae06010 0x4>, <0x4a0025cc 0x8>, + <0x4ae06010 0x4>, <0x4a0025cc 0xc>, <0x4a002470 0x4>; reg-names = "setup-address", "control-address", "int-address", "efuse-address", @@ -942,7 +977,7 @@ ti,clock-cycles = <16>; reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>, - <0x4ae06010 0x4>, <0x4a0025e0 0x8>, + <0x4ae06010 0x4>, <0x4a0025e0 0xc>, <0x4a00246c 0x4>; reg-names = "setup-address", "control-address", "int-address", "efuse-address", @@ -975,7 +1010,7 @@ ti,clock-cycles = <16>; reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>, - <0x4ae06010 0x4>, <0x4a003b08 0x8>, + <0x4ae06010 0x4>, <0x4a003b08 0xc>, <0x4ae0c154 0x4>; reg-names = "setup-address", "control-address", "int-address", "efuse-address", @@ -1168,7 +1203,7 @@ status = "disabled"; }; - rtc@48838000 { + rtc: rtc@48838000 { compatible = "ti,am3352-rtc"; reg = <0x48838000 0x100>; interrupts = , @@ -1419,7 +1454,7 @@ compatible = "ti,dra7-d_can"; ti,hwmods = "dcan1"; reg = <0x4ae3c000 0x2000>; - syscon-raminit = <&dra7_ctrl_core 0x558 0>; + syscon-raminit = <&scm_conf 0x558 0>; interrupts = ; clocks = <&dcan1_sys_clk_mux>; status = "disabled"; @@ -1429,12 +1464,23 @@ compatible = "ti,dra7-d_can"; ti,hwmods = "dcan2"; reg = <0x48480000 0x2000>; - syscon-raminit = <&dra7_ctrl_core 0x558 1>; + syscon-raminit = <&scm_conf 0x558 1>; interrupts = ; clocks = <&sys_clkin1>; status = "disabled"; }; }; + + thermal_zones: thermal-zones { + #include "omap4-cpu-thermal.dtsi" + #include "omap5-gpu-thermal.dtsi" + #include "omap5-core-thermal.dtsi" + }; + +}; + +&cpu_thermal { + polling-delay = <500>; /* milliseconds */ }; /include/ "dra7xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index daf28110d4872224be02ef57de5c61de06a7f55a..ce0390f081d92ff6966657a5a45713fa7c32c309 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -377,6 +377,14 @@ phy-supply = <&ldo4_reg>; }; +&omap_dwc3_1 { + extcon = <&extcon_usb1>; +}; + +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; + &usb1 { dr_mode = "peripheral"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index f7fb0d0ef25a5400b5738ba8b8afad955cded5f5..03d742f8d572f10a42e426055f28e550ca8bd7a5 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -20,6 +20,11 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; + + /* cooling options */ + cooling-min-level = <0>; + cooling-max-level = <2>; + #cooling-cells = <2>; /* min followed by max */ }; }; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 00eeed789b4b74a306137f82d6fb70ebea831fe7..cc560a70926f003155474d9956652c6fe09718e7 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -31,6 +31,11 @@ clock-names = "cpu"; clock-latency = <300000>; /* From omap-cpufreq driver */ + + /* cooling options */ + cooling-min-level = <0>; + cooling-max-level = <2>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@1 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 99b09a44e2694129ece5426f8df2227719255a37..3b933f74d000cd039b3ecf441928c114dca0e124 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1493,6 +1493,14 @@ ti,dividers = <1>, <8>; }; + clkout2_clk: clkout2_clk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkoutmux2_clk_mux>; + ti,bit-shift = <8>; + reg = <0x06b0>; + }; + l3init_960m_gfclk: l3init_960m_gfclk { #clock-cells = <0>; compatible = "ti,gate-clock"; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 667d323e80a3e17616aec13cd0faab9f5a638a89..19446273e4a7f83242bf8ead39735462d2b649e7 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -94,3 +94,16 @@ vdd33a-supply = <®_3p3v>; }; }; + +&pfc { + uart1_pins: uart@e1030000 { + renesas,groups = "uart1_ctrl", "uart1_data"; + renesas,function = "uart1"; + }; +}; + +&uart1 { + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index cc7bfe0ba40af9a90ac8756c74e45865e0c68b0a..bb45694d91bc1e6c4557085287235613b52f16d3 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -169,12 +169,18 @@ clock-names = "sclk"; }; + pfc: pfc@e0140200 { + compatible = "renesas,pfc-emev2"; + reg = <0xe0140200 0x100>; + }; + gpio0: gpio@e0050000 { compatible = "renesas,em-gio"; reg = <0xe0050000 0x2c>, <0xe0050040 0x20>; interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>, <0 68 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; + gpio-ranges = <&pfc 0 0 32>; #gpio-cells = <2>; ngpios = <32>; interrupt-controller; @@ -186,6 +192,7 @@ interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>, <0 70 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; + gpio-ranges = <&pfc 0 32 32>; #gpio-cells = <2>; ngpios = <32>; interrupt-controller; @@ -197,6 +204,7 @@ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>, <0 72 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; + gpio-ranges = <&pfc 0 64 32>; #gpio-cells = <2>; ngpios = <32>; interrupt-controller; @@ -208,6 +216,7 @@ interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>, <0 74 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; + gpio-ranges = <&pfc 0 96 32>; #gpio-cells = <2>; ngpios = <32>; interrupt-controller; @@ -219,6 +228,7 @@ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>, <0 76 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; + gpio-ranges = <&pfc 0 128 31>; #gpio-cells = <2>; ngpios = <31>; interrupt-controller; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 14ab515aa83cd1a1f02918563b769657fe8c472c..e3bfb11c6ef82c3194c22f449e5d1c31ac642631 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -176,6 +176,10 @@ compatible = "samsung,exynos3250-cmu"; reg = <0x10030000 0x20000>; #clock-cells = <1>; + assigned-clocks = <&cmu CLK_MOUT_ACLK_400_MCUISP_SUB>, + <&cmu CLK_MOUT_ACLK_266_SUB>; + assigned-clock-parents = <&cmu CLK_FIN_PLL>, + <&cmu CLK_FIN_PLL>; }; cmu_dmc: clock-controller@105C0000 { diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index adb4f6a97a1d5b19d67d486e7d36dd386884d1fd..d6b49e5b32e9f35ed2a1378e1f7933997c5d4e85 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -9,6 +9,7 @@ #include #include +#include #include "exynos4412.dtsi" / { @@ -75,10 +76,18 @@ }; }; + emmc_pwrseq: pwrseq { + pinctrl-0 = <&sd1_cd>; + pinctrl-names = "default"; + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpk1 2 1>; + }; + mmc@12550000 { pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; vmmc-supply = <&ldo20_reg &buck8_reg>; + mmc-pwrseq = <&emmc_pwrseq>; status = "okay"; num-slots = <1>; @@ -97,6 +106,8 @@ rtc@10070000 { status = "okay"; + clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; + clock-names = "rtc", "rtc_src"; }; g2d@10800000 { @@ -472,6 +483,12 @@ }; }; +/* RSTN signal for eMMC */ +&sd1_cd { + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; +}; + &pinctrl_1 { gpio_power_key: power_key { samsung,pins = "gpx1-3"; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index b9aeec430527e3afd5aeb2c2b1af8f3a1b102682..1eca97ee4bd6320a3a3a44ede264e269041cd088 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -29,6 +29,7 @@ chosen { bootargs = "console=tty1"; + stdout-path = "serial3:115200n8"; }; gpio-keys { @@ -183,7 +184,20 @@ powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; edid-emulation = <5>; - panel = <&panel>; + + ports { + port@0 { + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; }; }; @@ -228,6 +242,20 @@ compatible = "auo,b116xw03"; power-supply = <&fet6>; backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; + }; + + mmc3_pwrseq: mmc3_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */ + <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */ + clocks = <&max77686 MAX77686_CLK_PMIC>; + clock-names = "ext_clock"; }; }; @@ -242,7 +270,14 @@ samsung,link-rate = <0x0a>; samsung,lane-count = <2>; samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; - bridge = <&ptn3460>; + + ports { + port@0 { + dp_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; }; &ehci { @@ -531,17 +566,34 @@ status = "okay"; num-slots = <1>; broken-cd; + cap-sdio-irq; + keep-power-in-suspend; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>; bus-width = <4>; cap-sd-highspeed; + mmc-pwrseq = <&mmc3_pwrseq>; }; &pinctrl_0 { + wifi_en: wifi-en { + samsung,pins = "gpx0-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + wifi_rst: wifi-rst { + samsung,pins = "gpx0-2"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + power_key_irq: power-key-irq { samsung,pins = "gpx1-3"; samsung,pin-function = <0xf>; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index f02775487cd4d3d20925afb84da693f92ad13e1e..d03f9b8d376d082308fa9e06c515f69ae83386c2 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -25,6 +25,7 @@ chosen { bootargs = "console=tty1"; + stdout-path = "serial3:115200n8"; }; gpio-keys { @@ -429,7 +430,6 @@ &mmc_0 { status = "okay"; num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; @@ -437,11 +437,8 @@ samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; /* @@ -451,7 +448,6 @@ &mmc_1 { status = "okay"; num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; @@ -459,11 +455,8 @@ samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-sd-highspeed; }; &pinctrl_0 { @@ -490,7 +483,7 @@ power_key_irq: power-key-irq { samsung,pins = "gpx1-3"; - samsung,pin-function = <0>; + samsung,pin-function = <0xf>; samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; @@ -518,7 +511,7 @@ lid_irq: lid-irq { samsung,pins = "gpx3-5"; - samsung,pin-function = <0>; + samsung,pin-function = <0xf>; samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 77f656eb8e6b87fe19182b72e66c2ae9160f4e59..257e2f10525de14fb8eee4ca5b4ecd630da18cf7 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -143,7 +143,7 @@ compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; interrupt-controller; - #interrups-cells = <2>; + #interrupt-cells = <2>; interrupt-parent = <&mct_map>; interrupts = <0 0>, <1 0>, <2 0>, <3 0>, <4 0>, <5 0>; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index db2c1c4cd90076b5c7bb47d12737e46bf4938264..b82b6fa15f4861d21087dbe82b578a3c66ff3f4e 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -55,7 +55,7 @@ samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; vmmc-supply = <&ldo10_reg>; bus-width = <8>; cap-mmc-highspeed; @@ -68,7 +68,7 @@ samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; vmmc-supply = <&ldo19_reg>; vqmmc-supply = <&ldo13_reg>; bus-width = <4>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index c47bb70665c1652c6b907e8d3d05cea077781079..146e71118a72b4eef98faf47f644c0216bbb5894 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -43,6 +43,10 @@ pinctrl-names = "default"; }; + chosen { + stdout-path = "serial3:115200n8"; + }; + fixed-rate-clocks { oscclk { compatible = "samsung,exynos5420-oscclk"; @@ -118,6 +122,19 @@ compatible = "auo,b116xw03"; power-supply = <&tps65090_fet6>; backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; + }; + + mmc1_pwrseq: mmc1_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */ + clocks = <&max77802 MAX77802_CLK_32K_CP>; + clock-names = "ext_clock"; }; }; @@ -137,7 +154,14 @@ samsung,link-rate = <0x06>; samsung,lane-count = <2>; samsung,hpd-gpio = <&gpx2 6 0>; - bridge = <&ps8625>; + + ports { + port@0 { + dp_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; }; &fimd { @@ -581,6 +605,8 @@ interrupt-parent = <&gpx0>; pinctrl-names = "default"; pinctrl-0 = <&max98090_irq>; + clocks = <&pmu_system_controller 0>; + clock-names = "mclk"; }; light-sensor@44 { @@ -595,8 +621,22 @@ sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>; lane-count = <2>; - panel = <&panel>; use-external-pwm; + + ports { + port@0 { + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; + }; }; @@ -659,11 +699,33 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 2>; + samsung,read-strobe-delay = <90>; pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>; bus-width = <8>; }; +&mmc_1 { + status = "okay"; + num-slots = <1>; + broken-cd; + cap-sdio-irq; + keep-power-in-suspend; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <1>; + samsung,dw-mshc-sdr-timing = <0 1>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_int>, <&sd1_bus1>, + <&sd1_bus4>, <&sd1_bus8>, <&wifi_en>; + bus-width = <4>; + cap-sd-highspeed; + mmc-pwrseq = <&mmc1_pwrseq>; + vqmmc-supply = <&buck10_reg>; +}; + &mmc_2 { status = "okay"; num-slots = <1>; @@ -674,7 +736,7 @@ samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; bus-width = <4>; }; @@ -683,6 +745,13 @@ pinctrl-names = "default"; pinctrl-0 = <&mask_tpm_reset>; + wifi_en: wifi-en { + samsung,pins = "gpx0-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + max98090_irq: max98090-irq { samsung,pins = "gpx0-2"; samsung,pin-function = <0>; @@ -770,6 +839,29 @@ }; }; +&pinctrl_1 { + /* Adjust WiFi drive strengths lower for EMI */ + sd1_clk: sd1-clk { + samsung,pin-drv = <2>; + }; + + sd1_cmd: sd1-cmd { + samsung,pin-drv = <2>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pin-drv = <2>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pin-drv = <2>; + }; + + sd1_bus8: sd1-bus-width8 { + samsung,pin-drv = <2>; + }; +}; + &pinctrl_2 { pmic_dvs_2: pmic-dvs-2 { samsung,pins = "gpj4-2"; diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi index ba686e40eac7965942555a1f5eca9a81bb57ef39..8b153166ebdb430e6c827ab1a80d5bd9da316e47 100644 --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi @@ -201,6 +201,13 @@ samsung,pin-drv = <3>; }; + sd0_rclk: sd0-rclk { + samsung,pins = "gpc0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <3>; + }; + sd1_cmd: sd1-cmd { samsung,pins = "gpc1-1"; samsung,pin-function = <2>; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 8be3d7b489ff3585dad03e38f8177a300cbef00f..9103f2381a6d7ccefd22a429758fd7e3a4755820 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -80,8 +80,11 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 2>; + samsung,read-strobe-delay = <90>; pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 + &sd0_rclk>; bus-width = <8>; cap-mmc-highspeed; }; @@ -93,7 +96,7 @@ samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; bus-width = <4>; cap-sd-highspeed; }; diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi b/arch/arm/boot/dts/exynos5420-trip-points.dtsi index 5d31fc14082360b41cc742ad3f549dc5d4f9013c..2180a0152c9bf9d78b8772af284d6445ad0b6ebd 100644 --- a/arch/arm/boot/dts/exynos5420-trip-points.dtsi +++ b/arch/arm/boot/dts/exynos5420-trip-points.dtsi @@ -28,7 +28,7 @@ trips { type = "active"; }; cpu-crit-0 { - temperature = <1200000>; /* millicelsius */ + temperature = <120000>; /* millicelsius */ hysteresis = <0>; /* millicelsius */ type = "critical"; }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index b3d2d53820e3d57005b6fb89d0f9e7dae72c3fa4..45317538bbaeb48309d1b16c0e18beb8a7376639 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -221,7 +221,7 @@ compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; interrupt-controller; - #interrups-cells = <1>; + #interrupt-cells = <1>; interrupt-parent = <&mct_map>; interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>, <9>, <10>, <11>; @@ -251,6 +251,8 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; #power-domain-cells = <0>; + clocks = <&clock CLK_GSCL0>, <&clock CLK_GSCL1>; + clock-names = "asb0", "asb1"; }; isp_pd: power-domain@10044020 { @@ -283,9 +285,11 @@ <&clock CLK_MOUT_SW_ACLK300>, <&clock CLK_MOUT_USER_ACLK300_DISP1>, <&clock CLK_MOUT_SW_ACLK400>, - <&clock CLK_MOUT_USER_ACLK400_DISP1>; + <&clock CLK_MOUT_USER_ACLK400_DISP1>, + <&clock CLK_FIMD1>, <&clock CLK_MIXER>; clock-names = "oscclk", "pclk0", "clk0", - "pclk1", "clk1", "pclk2", "clk2"; + "pclk1", "clk1", "pclk2", "clk2", + "asb0", "asb1"; }; pinctrl_0: pinctrl@13400000 { @@ -532,6 +536,7 @@ clock-names = "dp"; phys = <&dp_phy>; phy-names = "dp"; + power-domains = <&disp_pd>; }; mipi_phy: video-phy@10040714 { diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index a519c863248d85f79a24d4fa918c53827819ca90..edc25cf1d71754d230912f16393333e51574e1a1 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -264,6 +264,13 @@ }; }; + emmc_pwrseq: pwrseq { + pinctrl-0 = <&emmc_nrst_pin>; + pinctrl-names = "default"; + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpd1 0 1>; + }; + i2c_2: i2c@12C80000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; @@ -298,13 +305,14 @@ &mmc_0 { status = "okay"; + mmc-pwrseq = <&emmc_pwrseq>; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; bus-width = <8>; cap-mmc-highspeed; }; @@ -316,7 +324,7 @@ samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; bus-width = <4>; cap-sd-highspeed; }; @@ -330,6 +338,15 @@ }; }; +&pinctrl_1 { + emmc_nrst_pin: emmc-nrst { + samsung,pins = "gpd1-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + &usbdrd_dwc3_0 { dr_mode = "host"; }; diff --git a/arch/arm/boot/dts/exynos5440-trip-points.dtsi b/arch/arm/boot/dts/exynos5440-trip-points.dtsi index 48adfa8f4300b5c17d6bd43377568952c01b9593..356e963edf11e58f95c57f70be0661a6277cddd8 100644 --- a/arch/arm/boot/dts/exynos5440-trip-points.dtsi +++ b/arch/arm/boot/dts/exynos5440-trip-points.dtsi @@ -18,7 +18,7 @@ trips { type = "active"; }; cpu-crit-0 { - temperature = <1050000>; /* millicelsius */ + temperature = <105000>; /* millicelsius */ hysteresis = <0>; /* millicelsius */ type = "critical"; }; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 06737c60d33366b78eb74f16df8e0c113091a2bd..02eb8b15374f3c84ef4b215f4d7da85d2e9f342a 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -42,6 +42,10 @@ pinctrl-names = "default"; }; + chosen { + stdout-path = "serial3:115200n8"; + }; + fixed-rate-clocks { oscclk { compatible = "samsung,exynos5420-oscclk"; @@ -119,6 +123,13 @@ power-supply = <&tps65090_fet6>; backlight = <&backlight>; }; + + mmc1_pwrseq: mmc1_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */ + clocks = <&max77802 MAX77802_CLK_32K_CP>; + clock-names = "ext_clock"; + }; }; &adc { @@ -581,6 +592,8 @@ interrupt-parent = <&gpx0>; pinctrl-names = "default"; pinctrl-0 = <&max98091_irq>; + clocks = <&pmu_system_controller 0>; + clock-names = "mclk"; }; light-sensor@44 { @@ -641,18 +654,41 @@ num-slots = <1>; broken-cd; mmc-hs200-1_8v; + mmc-hs400-1_8v; cap-mmc-highspeed; non-removable; card-detect-delay = <200>; - clock-frequency = <400000000>; + clock-frequency = <800000000>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 2>; + samsung,read-strobe-delay = <90>; pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>; bus-width = <8>; }; +&mmc_1 { + status = "okay"; + num-slots = <1>; + broken-cd; + cap-sdio-irq; + keep-power-in-suspend; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <1>; + samsung,dw-mshc-sdr-timing = <0 1>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_int>, <&sd1_bus1>, + <&sd1_bus4>, <&sd1_bus8>, <&wifi_en>; + bus-width = <4>; + cap-sd-highspeed; + mmc-pwrseq = <&mmc1_pwrseq>; + vqmmc-supply = <&buck10_reg>; +}; + &mmc_2 { status = "okay"; num-slots = <1>; @@ -663,7 +699,7 @@ samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; bus-width = <4>; }; @@ -672,6 +708,13 @@ pinctrl-names = "default"; pinctrl-0 = <&mask_tpm_reset>; + wifi_en: wifi-en { + samsung,pins = "gpx0-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + max98091_irq: max98091-irq { samsung,pins = "gpx0-2"; samsung,pin-function = <0>; @@ -759,6 +802,29 @@ }; }; +&pinctrl_1 { + /* Adjust WiFi drive strengths lower for EMI */ + sd1_clk: sd1-clk { + samsung,pin-drv = <2>; + }; + + sd1_cmd: sd1-cmd { + samsung,pin-drv = <2>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pin-drv = <2>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pin-drv = <2>; + }; + + sd1_bus8: sd1-bus-width8 { + samsung,pin-drv = <2>; + }; +}; + &pinctrl_2 { pmic_dvs_2: pmic-dvs-2 { samsung,pins = "gpj4-2"; diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi index 238814596a8787b5135df02f592306a823a1319e..44044f2751151c6a244036de3d665da9da4bd32f 100644 --- a/arch/arm/boot/dts/hip04.dtsi +++ b/arch/arm/boot/dts/hip04.dtsi @@ -275,7 +275,6 @@ compatible = "arm,coresight-etb10", "arm,primecell"; reg = <0 0xe3c42000 0 0x1000>; - coresight-default-sink; clocks = <&clk_375m>; clock-names = "apb_pclk"; port { diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 7e6eef2488e807c12c36aaebfd3e64b076f7622f..82045398bf1fabdf47664290d636d78a38b23b14 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -12,6 +12,7 @@ */ /dts-v1/; +#include #include "imx23.dtsi" / { @@ -93,6 +94,7 @@ ahb@80080000 { usb0: usb@80080000 { + dr_mode = "host"; vbus-supply = <®_usb0_vbus>; status = "okay"; }; @@ -122,7 +124,7 @@ user { label = "green"; - gpios = <&gpio2 1 1>; + gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index 9c21b15837627fcf2a98032183d77e2a8be153db..dd45e6971bc35061a3b9d5b4579c6e6697ca9eca 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -75,6 +75,27 @@ mux-int-port = <1>; mux-ext-port = <4>; }; + + wvga: display { + model = "CLAA057VC01CW"; + bits-per-pixel = <16>; + fsl,pcr = <0xfa208b80>; + bus-width = <18>; + native-mode = <&wvga_timings>; + display-timings { + wvga_timings: 640x480 { + hactive = <640>; + vactive = <480>; + hback-porch = <45>; + hfront-porch = <114>; + hsync-len = <1>; + vback-porch = <33>; + vfront-porch = <11>; + vsync-len = <1>; + clock-frequency = <25200000>; + }; + }; + }; }; &audmux { @@ -190,6 +211,33 @@ >; }; + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX25_PAD_LD0__LD0 0xe0 + MX25_PAD_LD1__LD1 0xe0 + MX25_PAD_LD2__LD2 0xe0 + MX25_PAD_LD3__LD3 0xe0 + MX25_PAD_LD4__LD4 0xe0 + MX25_PAD_LD5__LD5 0xe0 + MX25_PAD_LD6__LD6 0xe0 + MX25_PAD_LD7__LD7 0xe0 + MX25_PAD_LD8__LD8 0xe0 + MX25_PAD_LD9__LD9 0xe0 + MX25_PAD_LD10__LD10 0xe0 + MX25_PAD_LD11__LD11 0xe0 + MX25_PAD_LD12__LD12 0xe0 + MX25_PAD_LD13__LD13 0xe0 + MX25_PAD_LD14__LD14 0xe0 + MX25_PAD_LD15__LD15 0xe0 + MX25_PAD_GPIO_E__LD16 0xe0 + MX25_PAD_GPIO_F__LD17 0xe0 + MX25_PAD_HSYNC__HSYNC 0xe0 + MX25_PAD_VSYNC__VSYNC 0xe0 + MX25_PAD_LSCLK__LSCLK 0xe0 + MX25_PAD_OE_ACD__OE_ACD 0xe0 + MX25_PAD_CONTRAST__CONTRAST 0xe0 + >; + }; pinctrl_uart1: uart1grp { fsl,pins = < @@ -202,6 +250,16 @@ }; }; +&lcdc { + display = <&wvga>; + fsl,lpccr = <0x00a903ff>; + fsl,lscr1 = <0x00120300>; + fsl,dmacr = <0x00020010>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + status = "okay"; +}; + &nfc { nand-on-flash-bbt; status = "okay"; diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h index 88eebb15da6a9ed45586e2ddfba37e9e28d85336..7c4b9f2f9aad8a31214ba2627be1fcb180884220 100644 --- a/arch/arm/boot/dts/imx25-pinfunc.h +++ b/arch/arm/boot/dts/imx25-pinfunc.h @@ -17,48 +17,69 @@ * */ +#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000 + #define MX25_PAD_A10__A10 0x008 0x000 0x000 0x00 0x000 #define MX25_PAD_A10__GPIO_4_0 0x008 0x000 0x000 0x05 0x000 #define MX25_PAD_A13__A13 0x00c 0x22C 0x000 0x00 0x000 #define MX25_PAD_A13__GPIO_4_1 0x00c 0x22C 0x000 0x05 0x000 +#define MX25_PAD_A13__LCDC_CLS 0x00c 0x22C 0x000 0x07 0x000 #define MX25_PAD_A14__A14 0x010 0x230 0x000 0x10 0x000 #define MX25_PAD_A14__GPIO_2_0 0x010 0x230 0x000 0x15 0x000 +#define MX25_PAD_A14__SIM1_CLK1 0x010 0x230 0x000 0x16 0x000 +#define MX25_PAD_A14__LCDC_SPL 0x010 0x230 0x000 0x17 0x000 #define MX25_PAD_A15__A15 0x014 0x234 0x000 0x10 0x000 #define MX25_PAD_A15__GPIO_2_1 0x014 0x234 0x000 0x15 0x000 +#define MX25_PAD_A15__SIM1_RST1 0x014 0x234 0x000 0x16 0x000 +#define MX25_PAD_A15__LCDC_PS 0x014 0x234 0x000 0x17 0x000 #define MX25_PAD_A16__A16 0x018 0x000 0x000 0x10 0x000 #define MX25_PAD_A16__GPIO_2_2 0x018 0x000 0x000 0x15 0x000 +#define MX25_PAD_A16__SIM1_VEN1 0x018 0x000 0x000 0x16 0x000 +#define MX25_PAD_A16__LCDC_REV 0x018 0x000 0x000 0x17 0x000 #define MX25_PAD_A17__A17 0x01c 0x238 0x000 0x10 0x000 #define MX25_PAD_A17__GPIO_2_3 0x01c 0x238 0x000 0x15 0x000 +#define MX25_PAD_A17__SIM1_TX 0x01c 0x238 0x554 0x16 0x000 +#define MX25_PAD_A17__FEC_TX_ERR 0x01c 0x238 0x000 0x17 0x000 #define MX25_PAD_A18__A18 0x020 0x23c 0x000 0x10 0x000 #define MX25_PAD_A18__GPIO_2_4 0x020 0x23c 0x000 0x15 0x000 +#define MX25_PAD_A18__SIM1_PD1 0x020 0x23c 0x550 0x16 0x000 #define MX25_PAD_A18__FEC_COL 0x020 0x23c 0x504 0x17 0x000 #define MX25_PAD_A19__A19 0x024 0x240 0x000 0x10 0x000 -#define MX25_PAD_A19__FEC_RX_ER 0x024 0x240 0x518 0x17 0x000 #define MX25_PAD_A19__GPIO_2_5 0x024 0x240 0x000 0x15 0x000 +#define MX25_PAD_A19__SIM1_RX1 0x024 0x240 0x54c 0x16 0x000 +#define MX25_PAD_A19__FEC_RX_ERR 0x024 0x240 0x518 0x17 0x000 #define MX25_PAD_A20__A20 0x028 0x244 0x000 0x10 0x000 #define MX25_PAD_A20__GPIO_2_6 0x028 0x244 0x000 0x15 0x000 +#define MX25_PAD_A20__SIM2_CLK1 0x028 0x244 0x000 0x16 0x000 #define MX25_PAD_A20__FEC_RDATA2 0x028 0x244 0x50c 0x17 0x000 #define MX25_PAD_A21__A21 0x02c 0x248 0x000 0x10 0x000 #define MX25_PAD_A21__GPIO_2_7 0x02c 0x248 0x000 0x15 0x000 +#define MX25_PAD_A21__SIM2_RST1 0x02c 0x248 0x000 0x16 0x000 #define MX25_PAD_A21__FEC_RDATA3 0x02c 0x248 0x510 0x17 0x000 #define MX25_PAD_A22__A22 0x030 0x000 0x000 0x10 0x000 #define MX25_PAD_A22__GPIO_2_8 0x030 0x000 0x000 0x15 0x000 +#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x17 0x000 +#define MX25_PAD_A22__SIM2_VEN1 0x030 0x000 0x000 0x16 0x000 +#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x17 0x000 #define MX25_PAD_A23__A23 0x034 0x24c 0x000 0x10 0x000 #define MX25_PAD_A23__GPIO_2_9 0x034 0x24c 0x000 0x15 0x000 +#define MX25_PAD_A23__SIM2_TX1 0x034 0x24c 0x560 0x16 0x000 +#define MX25_PAD_A23__FEC_TDATA3 0x034 0x24c 0x000 0x17 0x000 #define MX25_PAD_A24__A24 0x038 0x250 0x000 0x10 0x000 #define MX25_PAD_A24__GPIO_2_10 0x038 0x250 0x000 0x15 0x000 +#define MX25_PAD_A24__SIM2_PD1 0x038 0x250 0x55c 0x16 0x000 #define MX25_PAD_A24__FEC_RX_CLK 0x038 0x250 0x514 0x17 0x000 #define MX25_PAD_A25__A25 0x03c 0x254 0x000 0x10 0x000 @@ -133,20 +154,25 @@ #define MX25_PAD_D15__D15 0x088 0x280 0x000 0x00 0x000 #define MX25_PAD_D15__LD16 0x088 0x280 0x000 0x01 0x000 #define MX25_PAD_D15__GPIO_4_5 0x088 0x280 0x000 0x05 0x000 +#define MX25_PAD_D15__SDHC1_DAT7 0x088 0x280 0x4d8 0x06 0x000 #define MX25_PAD_D14__D14 0x08c 0x284 0x000 0x00 0x000 #define MX25_PAD_D14__LD17 0x08c 0x284 0x000 0x01 0x000 #define MX25_PAD_D14__GPIO_4_6 0x08c 0x284 0x000 0x05 0x000 +#define MX25_PAD_D14__SDHC1_DAT6 0x08c 0x284 0x4d4 0x06 0x000 #define MX25_PAD_D13__D13 0x090 0x288 0x000 0x00 0x000 #define MX25_PAD_D13__LD18 0x090 0x288 0x000 0x01 0x000 #define MX25_PAD_D13__GPIO_4_7 0x090 0x288 0x000 0x05 0x000 +#define MX25_PAD_D13__SDHC1_DAT5 0x090 0x288 0x4d0 0x06 0x000 #define MX25_PAD_D12__D12 0x094 0x28c 0x000 0x00 0x000 #define MX25_PAD_D12__GPIO_4_8 0x094 0x28c 0x000 0x05 0x000 +#define MX25_PAD_D12__SDHC1_DAT4 0x094 0x28c 0x4cc 0x06 0x000 #define MX25_PAD_D11__D11 0x098 0x290 0x000 0x00 0x000 #define MX25_PAD_D11__GPIO_4_9 0x098 0x290 0x000 0x05 0x000 +#define MX25_PAD_D11__USBOTG_PWR 0x098 0x290 0x000 0x06 0x000 #define MX25_PAD_D10__D10 0x09c 0x294 0x000 0x00 0x000 #define MX25_PAD_D10__GPIO_4_10 0x09c 0x294 0x000 0x05 0x000 @@ -212,26 +238,33 @@ #define MX25_PAD_LD8__LD8 0x0e8 0x2e0 0x000 0x10 0x000 #define MX25_PAD_LD8__FEC_TX_ERR 0x0e8 0x2e0 0x000 0x15 0x000 +#define MX25_PAD_LD8__SDHC2_CMD 0x0e8 0x2e0 0x4e0 0x06 0x000 #define MX25_PAD_LD9__LD9 0x0ec 0x2e4 0x000 0x10 0x000 #define MX25_PAD_LD9__FEC_COL 0x0ec 0x2e4 0x504 0x15 0x001 +#define MX25_PAD_LD9__SDHC2_CLK 0x0ec 0x2e4 0x4dc 0x06 0x000 #define MX25_PAD_LD10__LD10 0x0f0 0x2e8 0x000 0x10 0x000 -#define MX25_PAD_LD10__FEC_RX_ER 0x0f0 0x2e8 0x518 0x15 0x001 +#define MX25_PAD_LD10__FEC_RX_ERR 0x0f0 0x2e8 0x518 0x15 0x001 #define MX25_PAD_LD11__LD11 0x0f4 0x2ec 0x000 0x10 0x000 #define MX25_PAD_LD11__FEC_RDATA2 0x0f4 0x2ec 0x50c 0x15 0x001 +#define MX25_PAD_LD11__SDHC2_DAT1 0x0f4 0x2ec 0x4e8 0x06 0x000 #define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x10 0x000 +#define MX25_PAD_LD12__CSPI2_MOSI 0x0f8 0x2f0 0x4a0 0x02 0x000 #define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x15 0x001 #define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x10 0x000 +#define MX25_PAD_LD13__CSPI2_MISO 0x0fc 0x2f4 0x49c 0x02 0x000 #define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x15 0x000 #define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x10 0x000 +#define MX25_PAD_LD14__CSPI2_SCLK 0x100 0x2f8 0x494 0x02 0x000 #define MX25_PAD_LD14__FEC_TDATA3 0x100 0x2f8 0x000 0x15 0x000 #define MX25_PAD_LD15__LD15 0x104 0x2fc 0x000 0x10 0x000 +#define MX25_PAD_LD15__CSPI2_RDY 0x104 0x2fc 0x498 0x02 0x000 #define MX25_PAD_LD15__FEC_RX_CLK 0x104 0x2fc 0x514 0x15 0x001 #define MX25_PAD_HSYNC__HSYNC 0x108 0x300 0x000 0x10 0x000 @@ -244,6 +277,7 @@ #define MX25_PAD_LSCLK__GPIO_1_24 0x110 0x308 0x000 0x15 0x000 #define MX25_PAD_OE_ACD__OE_ACD 0x114 0x30c 0x000 0x10 0x000 +#define MX25_PAD_OE_ACD__CSPI2_SS0 0x114 0x30c 0x4a4 0x02 0x000 #define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x15 0x000 #define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x10 0x000 @@ -257,26 +291,31 @@ #define MX25_PAD_CSI_D2__CSI_D2 0x120 0x318 0x000 0x10 0x000 #define MX25_PAD_CSI_D2__UART5_RXD_MUX 0x120 0x318 0x578 0x11 0x001 +#define MX25_PAD_CSI_D2__SIM1_CLK0 0x120 0x318 0x000 0x04 0x000 #define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x15 0x000 #define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x17 0x000 #define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x10 0x000 #define MX25_PAD_CSI_D3__UART5_TXD_MUX 0x124 0x31c 0x000 0x11 0x000 +#define MX25_PAD_CSI_D3__SIM1_RST0 0x124 0x31c 0x000 0x04 0x000 #define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x15 0x000 #define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x17 0x001 #define MX25_PAD_CSI_D4__CSI_D4 0x128 0x320 0x000 0x10 0x000 #define MX25_PAD_CSI_D4__UART5_RTS 0x128 0x320 0x574 0x11 0x001 +#define MX25_PAD_CSI_D4__SIM1_VEN0 0x128 0x320 0x000 0x04 0x000 #define MX25_PAD_CSI_D4__GPIO_1_29 0x128 0x320 0x000 0x15 0x000 #define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x17 0x000 #define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x10 0x000 -#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x11 0x001 +#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x11 0x000 +#define MX25_PAD_CSI_D5__SIM1_TX0 0x12c 0x324 0x000 0x04 0x000 #define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x15 0x000 #define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x17 0x000 #define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x10 0x000 #define MX25_PAD_CSI_D6__SDHC2_CMD 0x130 0x328 0x4e0 0x12 0x001 +#define MX25_PAD_CSI_D6__SIM1_PD0 0x130 0x328 0x000 0x04 0x000 #define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x15 0x000 #define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x10 0x000 @@ -284,32 +323,32 @@ #define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x15 0x000 #define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x10 0x000 -#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x12 0x001 +#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x12 0x000 #define MX25_PAD_CSI_D8__GPIO_1_7 0x138 0x330 0x000 0x15 0x000 #define MX25_PAD_CSI_D8__CSPI3_SS2 0x138 0x330 0x4c4 0x17 0x000 #define MX25_PAD_CSI_D9__CSI_D9 0x13c 0x334 0x000 0x10 0x000 -#define MX25_PAD_CSI_D9__AUD6_RXFS 0x13c 0x334 0x000 0x12 0x001 +#define MX25_PAD_CSI_D9__AUD6_RXFS 0x13c 0x334 0x000 0x12 0x000 #define MX25_PAD_CSI_D9__GPIO_4_21 0x13c 0x334 0x000 0x15 0x000 #define MX25_PAD_CSI_D9__CSPI3_SS3 0x13c 0x334 0x4c8 0x17 0x000 #define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x10 0x000 -#define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x11 0x001 +#define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x11 0x000 #define MX25_PAD_CSI_MCLK__SDHC2_DAT0 0x140 0x338 0x4e4 0x12 0x001 #define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x15 0x000 #define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x10 0x000 -#define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x11 0x001 +#define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x11 0x000 #define MX25_PAD_CSI_VSYNC__SDHC2_DAT1 0x144 0x33c 0x4e8 0x12 0x001 #define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x15 0x000 #define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x10 0x000 -#define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x11 0x001 +#define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x11 0x000 #define MX25_PAD_CSI_HSYNC__SDHC2_DAT2 0x148 0x340 0x4ec 0x12 0x001 #define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x15 0x000 #define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x10 0x000 -#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x11 0x001 +#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x11 0x000 #define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3 0x14c 0x344 0x4f0 0x12 0x001 #define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x15 0x000 @@ -369,8 +408,8 @@ #define MX25_PAD_UART2_RTS__CC1 0x188 0x380 0x000 0x13 0x000 #define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x15 0x000 -#define MX25_PAD_UART2_CTS__FEC_RX_ER 0x18c 0x384 0x518 0x12 0x002 #define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x10 0x000 +#define MX25_PAD_UART2_CTS__FEC_RX_ERR 0x18c 0x384 0x518 0x12 0x002 #define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x15 0x000 #define MX25_PAD_SD1_CMD__SD1_CMD 0x190 0x388 0x000 0x10 0x000 @@ -392,11 +431,11 @@ #define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x15 0x000 #define MX25_PAD_SD1_DATA2__SD1_DATA2 0x1a0 0x398 0x000 0x10 0x000 -#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x15 0x002 +#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x12 0x002 #define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x15 0x000 #define MX25_PAD_SD1_DATA3__SD1_DATA3 0x1a4 0x39c 0x000 0x10 0x000 -#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x10 0x002 +#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x12 0x002 #define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x15 0x000 #define MX25_PAD_KPP_ROW0__KPP_ROW0 0x1a8 0x3a0 0x000 0x10 0x000 @@ -410,7 +449,7 @@ #define MX25_PAD_KPP_ROW2__GPIO_2_31 0x1b0 0x3a8 0x000 0x15 0x000 #define MX25_PAD_KPP_ROW3__KPP_ROW3 0x1b4 0x3ac 0x000 0x10 0x000 -#define MX25_PAD_KPP_ROW3__CSI_LD1 0x1b4 0x3ac 0x48c 0x13 0x002 +#define MX25_PAD_KPP_ROW3__CSI_D1 0x1b4 0x3ac 0x48c 0x13 0x002 #define MX25_PAD_KPP_ROW3__GPIO_3_0 0x1b4 0x3ac 0x000 0x15 0x000 #define MX25_PAD_KPP_COL0__KPP_COL0 0x1b8 0x3b0 0x000 0x10 0x000 @@ -455,9 +494,18 @@ #define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x15 0x000 #define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x10 0x000 +/* + * According to the i.MX25 Reference manual (IMX25RM, Rev. 2, + * 01/2011) this is CAN1_TX but that's wrong. + */ +#define MX25_PAD_FEC_RDATA1__CAN2_TX 0x1e0 0x3d8 0x000 0x14 0x000 #define MX25_PAD_FEC_RDATA1__GPIO_3_11 0x1e0 0x3d8 0x000 0x15 0x000 #define MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x1e4 0x3dc 0x000 0x10 0x000 +/* + * According to the i.MX25 Reference manual (IMX25RM, Rev. 2, + * 01/2011) this is CAN1_RX but that's wrong. + */ #define MX25_PAD_FEC_RX_DV__CAN2_RX 0x1e4 0x3dc 0x484 0x14 0x000 #define MX25_PAD_FEC_RX_DV__GPIO_3_12 0x1e4 0x3dc 0x000 0x15 0x000 @@ -471,30 +519,34 @@ #define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x10 0x000 #define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x15 0x000 -#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000 - #define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x10 0x000 #define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x16 0x000 #define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x12 0x000 #define MX25_PAD_GPIO_B__GPIO_B 0x1f8 0x3f4 0x000 0x10 0x000 -#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x16 0x001 #define MX25_PAD_GPIO_B__USBOTG_OC 0x1f8 0x3f4 0x57c 0x12 0x001 +#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x16 0x001 #define MX25_PAD_GPIO_C__GPIO_C 0x1fc 0x3f8 0x000 0x10 0x000 +#define MX25_PAD_GPIO_C__PWM4_PWMO 0x1fc 0x3f8 0x000 0x11 0x000 +#define MX25_PAD_GPIO_C__I2C2_SCL 0x1fc 0x3f8 0x51c 0x12 0x001 +#define MX25_PAD_GPIO_C__KPP_COL4 0x1fc 0x3f8 0x52c 0x13 0x001 #define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x16 0x000 #define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x10 0x000 +#define MX25_PAD_GPIO_D__I2C2_SDA 0x200 0x3fc 0x520 0x12 0x001 #define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x16 0x001 #define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x10 0x000 #define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x11 0x002 #define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x12 0x000 #define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x14 0x000 +#define MX25_PAD_GPIO_E__UART4_RXD 0x204 0x400 0x570 0x16 0x002 #define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x10 0x000 #define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x12 0x000 #define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x14 0x000 +#define MX25_PAD_GPIO_F__UART4_TXD 0x208 0x404 0x000 0x16 0x000 #define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK 0x20c 0x000 0x000 0x10 0x000 #define MX25_PAD_EXT_ARMCLK__GPIO_3_15 0x20c 0x000 0x000 0x15 0x000 @@ -505,6 +557,7 @@ #define MX25_PAD_VSTBY_REQ__VSTBY_REQ 0x214 0x408 0x000 0x10 0x000 #define MX25_PAD_VSTBY_REQ__AUD7_TXFS 0x214 0x408 0x000 0x14 0x000 #define MX25_PAD_VSTBY_REQ__GPIO_3_17 0x214 0x408 0x000 0x15 0x000 + #define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x10 0x000 #define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x15 0x000 @@ -517,6 +570,7 @@ #define MX25_PAD_BOOT_MODE0__BOOT_MODE0 0x224 0x000 0x000 0x00 0x000 #define MX25_PAD_BOOT_MODE0__GPIO_4_30 0x224 0x000 0x000 0x05 0x000 + #define MX25_PAD_BOOT_MODE1__BOOT_MODE1 0x228 0x000 0x000 0x00 0x000 #define MX25_PAD_BOOT_MODE1__GPIO_4_31 0x228 0x000 0x000 0x05 0x000 diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index e4d3aecc4ed2c0fd61b1c68a93f20a24b808bd8c..677f81d9dcd529f92b6cf856464ec6595ef00509 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -428,6 +428,7 @@ pwm4: pwm@53fc8000 { compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; + #pwm-cells = <2>; reg = <0x53fc8000 0x4000>; clocks = <&clks 108>, <&clks 52>; clock-names = "ipg", "per"; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 4b063b68db44cbd1f99c3b63bcdb5463a0236baa..6951b66d1ab7b4cbe37dcf8944a7626213979827 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -488,6 +488,7 @@ interrupts = <54>; clocks = <&clks IMX27_CLK_USB_IPG_GATE>; fsl,usbmisc = <&usbmisc 1>; + dr_mode = "host"; status = "disabled"; }; @@ -497,6 +498,7 @@ interrupts = <55>; clocks = <&clks IMX27_CLK_USB_IPG_GATE>; fsl,usbmisc = <&usbmisc 2>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts index 7198fe3798c62b52c2c86f5d2f895cc5179571fe..070e59cbdd8b76659506cf45a078a1e302bbe942 100644 --- a/arch/arm/boot/dts/imx28-apf28.dts +++ b/arch/arm/boot/dts/imx28-apf28.dts @@ -78,7 +78,7 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio4 13 0>; + phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index 1f38a052ad4b0d8767b712994d3c97ca110ca8ff..7ac4f1af16ac856d243674c630b9207da71d8335 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -110,6 +110,13 @@ }; }; }; + + can0: can@80032000 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + xceiver-supply = <®_can0_vcc>; + status = "okay"; + }; }; apbx@80040000 { @@ -130,6 +137,13 @@ status = "okay"; }; + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + fsl,uart-has-rtscts; + status = "okay"; + }; + usbphy0: usbphy@8007c000 { status = "okay"; }; @@ -143,7 +157,8 @@ ahb@80080000 { usb0: usb@80080000 { pinctrl-names = "default"; - pinctrl-0 = <&usb0_otg_apf28dev>; + pinctrl-0 = <&usb0_otg_apf28dev + &usb0_id_pins_b>; vbus-supply = <®_usb0_vbus>; status = "okay"; }; @@ -156,7 +171,7 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac1_pins_a>; - phy-reset-gpios = <&gpio0 23 0>; + phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; }; }; @@ -175,6 +190,14 @@ gpio = <&gpio1 23 1>; enable-active-high; }; + + reg_can0_vcc: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "can0_vcc"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; }; leds { @@ -200,8 +223,9 @@ user-button { label = "User button"; - gpios = <&gpio0 17 0>; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; linux,code = <0x100>; + gpio-key,wakeup; }; }; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 47f68ac868d4b6ab20751d5d2d457a31f10a7ef6..4e073e8547425ee189a6c91331ade03052e1d999 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -829,6 +829,19 @@ fsl,pull-up = ; }; + spi3_pins_b: spi3@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_SSP3_SCK__SSP3_SCK + MX28_PAD_SSP3_MOSI__SSP3_CMD + MX28_PAD_SSP3_MISO__SSP3_D0 + MX28_PAD_SSP3_SS0__SSP3_D3 + >; + fsl,drive-strength = ; + fsl,voltage = ; + fsl,pull-up = ; + }; + usb0_pins_a: usb0@0 { reg = <0>; fsl,pinmux-ids = < @@ -900,7 +913,7 @@ 80 81 68 69 70 71 72 73 74 75 76 77>; - interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty", + interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty", "saif0", "saif1", "i2c0", "i2c1", "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx", "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx"; @@ -1197,6 +1210,7 @@ interrupts = <92>; clocks = <&clks 61>; fsl,usbphy = <&usbphy1>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 6932928f3b45c99cc4d807edacf9475e55650056..b6478e97d6a7eb8cbb6478470d4a5e10794afaff 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -318,6 +318,7 @@ clocks = <&clks 73>; fsl,usbmisc = <&usbmisc 1>; fsl,usbphy = <&usbphy1>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 620b0f030591209f26dc0ad19af226b9a8310ed8..e2457138311f8661fd063da8be351a84cef49ced 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -197,6 +197,7 @@ reg = <0x53f80200 0x0200>; interrupts = <14>; clocks = <&clks IMX5_CLK_USB_PHY2_GATE>; + dr_mode = "host"; status = "disabled"; }; @@ -205,6 +206,7 @@ reg = <0x53f80400 0x0200>; interrupts = <16>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; + dr_mode = "host"; status = "disabled"; }; @@ -213,6 +215,7 @@ reg = <0x53f80600 0x0200>; interrupts = <17>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index c0116cffc513436d54584ee9d1c9d8ad933ebb83..f46fe9bf0bcb37a903d7ee05d67cc3289516acac 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -265,6 +265,7 @@ interrupts = <14>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; fsl,usbmisc = <&usbmisc 1>; + dr_mode = "host"; status = "disabled"; }; @@ -274,6 +275,7 @@ interrupts = <16>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; fsl,usbmisc = <&usbmisc 2>; + dr_mode = "host"; status = "disabled"; }; @@ -283,6 +285,7 @@ interrupts = <17>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; fsl,usbmisc = <&usbmisc 3>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index ff4fa7ecacd86ef1ddc7f4a63f23e32af5d2808c..c3e3ca9362fbb78b6b2ecb8ec0125b83abdb7352 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -309,6 +309,7 @@ clocks = <&clks IMX5_CLK_USBOH3_GATE>; fsl,usbmisc = <&usbmisc 1>; fsl,usbphy = <&usbphy1>; + dr_mode = "host"; status = "disabled"; }; @@ -318,6 +319,7 @@ interrupts = <16>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; fsl,usbmisc = <&usbmisc 2>; + dr_mode = "host"; status = "disabled"; }; @@ -327,6 +329,7 @@ interrupts = <17>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; fsl,usbmisc = <&usbmisc 3>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts index 9cd06e5e59f00e35b579c07118eed164872330b9..d4c4a22db4888269c26a2294add2421dd4349c7e 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts @@ -83,3 +83,7 @@ &ipu1_di0_disp0 { remote-endpoint = <&display0_in>; }; + +&pwm1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts index b413e24288dcb08b5ba5b73d461eaf67c3e2b175..15203f0e9725cb775dac06399ab212d12479e536 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts @@ -72,3 +72,7 @@ &ipu1_di0_disp0 { remote-endpoint = <&display0_in>; }; + +&pwm3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-cubox-i.dts b/arch/arm/boot/dts/imx6dl-cubox-i.dts index 58aa8f2b0f260f7613da2890cfce01a0fac25096..e0b7fe8e18f886608e7dd302409f0d045e1ebb29 100644 --- a/arch/arm/boot/dts/imx6dl-cubox-i.dts +++ b/arch/arm/boot/dts/imx6dl-cubox-i.dts @@ -1,5 +1,43 @@ /* * Copyright (C) 2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index 44a0e6736bb1217369b3c45e32ad4dbb007cea03..7369d2d7da3e545904d84175f353e220d267fef0 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -1,6 +1,44 @@ /* * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) * Based on dt work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-cubox-i.dts b/arch/arm/boot/dts/imx6q-cubox-i.dts index 9efd8b0c8011fea501c0033e3da5dd5cfed3e849..670bd8c4c847514f11bc3118f2b561b86fc8099d 100644 --- a/arch/arm/boot/dts/imx6q-cubox-i.dts +++ b/arch/arm/boot/dts/imx6q-cubox-i.dts @@ -1,5 +1,43 @@ /* * Copyright (C) 2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/imx6q-hummingboard.dts index c2bf8476ce45f8c496ea18e389bebc7839cb0d85..0f6044553a2490106c413b86bba4c5bbf515f6c9 100644 --- a/arch/arm/boot/dts/imx6q-hummingboard.dts +++ b/arch/arm/boot/dts/imx6q-hummingboard.dts @@ -1,6 +1,44 @@ /* * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) * Based on dt work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 93ec79bb6b35c54b451ff8ccb9775387f8574aa4..399103b8e2c948110154fa0b109e917a192061b0 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -294,19 +294,21 @@ }; &mipi_dsi { - port@2 { - reg = <2>; + ports { + port@2 { + reg = <2>; - mipi_mux_2: endpoint { - remote-endpoint = <&ipu2_di0_mipi>; + mipi_mux_2: endpoint { + remote-endpoint = <&ipu2_di0_mipi>; + }; }; - }; - port@3 { - reg = <3>; + port@3 { + reg = <3>; - mipi_mux_3: endpoint { - remote-endpoint = <&ipu2_di1_mipi>; + mipi_mux_3: endpoint { + remote-endpoint = <&ipu2_di1_mipi>; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 6a524ca011e70df048939fbc5ef0659c88a660e9..d033bb1820602773c9c0beaf661f779381344221 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -1,8 +1,48 @@ /* * Copyright (C) 2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "imx6qdl-microsom.dtsi" #include "imx6qdl-microsom-ar8035.dtsi" +#include +#include / { ir_recv: ir-receiver { @@ -66,6 +106,18 @@ spdif-controller = <&spdif>; spdif-out; }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pinctrl_gpio_key>; + pinctrl-names = "default"; + + button_0 { + label = "Button 0"; + gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; }; &hdmi { @@ -170,9 +222,19 @@ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 >; }; + + pinctrl_gpio_key: gpio-key { + fsl,pins = < + MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x17059 + >; + }; }; }; +&pwm1 { + status = "okay"; +}; + &spdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cubox_i_spdif>; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 62841e85a91e45d38e71c6e7a65d2d8f8b024154..151a3db2aea957f39d4437812e06a46455e117cb 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -1,5 +1,43 @@ /* * Copyright (C) 2013,2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "imx6qdl-microsom.dtsi" #include "imx6qdl-microsom-ar8035.dtsi" @@ -50,6 +88,19 @@ }; }; + sound-sgtl5000 { + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + compatible = "fsl,imx-audio-sgtl5000"; + model = "On-board Codec"; + mux-ext-port = <5>; + mux-int-port = <1>; + ssi-controller = <&ssi1>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "On-board SPDIF"; @@ -59,6 +110,10 @@ }; }; +&audmux { + status = "okay"; +}; + &can1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_flexcan1>; @@ -75,16 +130,24 @@ &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_i2c1>; - - /* - * Not fitted on Carrier-1 board... yet status = "okay"; + /* Pro baseboard model */ rtc: pcf8523@68 { compatible = "nxp,pcf8523"; reg = <0x68>; }; - */ + + /* Pro baseboard model */ + sgtl5000: sgtl5000@0a { + clocks = <&clks IMX6QDL_CLK_CKO>; + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>; + reg = <0x0a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + }; }; &i2c2 { @@ -129,6 +192,20 @@ >; }; + pinctrl_hummingboard_pwm1: pwm1grp { + fsl,pins = ; + }; + + pinctrl_hummingboard_sgtl5000: hummingboard-sgtl5000 { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; + pinctrl_hummingboard_spdif: hummingboard-spdif { fsl,pins = ; }; @@ -168,12 +245,28 @@ }; }; +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + status = "okay"; +}; + &spdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_spdif>; status = "okay"; }; +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + &usbh1 { disable-over-current; vbus-supply = <®_usbh1_vbus>; diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi index db9f45b2c57304603a78db4c20ca50a0f133c247..4a1820309cdb82e1ac0c9dcdb8fd5b11aa306a02 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -3,6 +3,44 @@ * * This describes the hookup for an AR8035 to the iMX6 on the SolidRun * MicroSOM. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ &fec { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi index 79eac6849d4c9d8964882d1e64435d868c2c7c01..349f82be816eb77c0119cdeeba4eb424711b9bb0 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi @@ -1,5 +1,43 @@ /* * Copyright (C) 2013,2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ &iomuxc { diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 19cc269a08d4d7acdc3572821b32399ee584f824..1ce6133b67f5c65fefd2fe85d368ac455b199950 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -31,6 +31,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio4 15 0>; + enable-active-high; }; reg_usb_h1_vbus: regulator@1 { @@ -40,6 +41,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio1 0 0>; + enable-active-high; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 009abd69385d854c15c4b35bc98aca87a1ef8d84..3b24b12651b2b86ee1a74d5baccca435778ddd3e 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -182,6 +182,33 @@ }; }; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + max7310_a: gpio@30 { + compatible = "maxim,max7310"; + reg = <0x30>; + gpio-controller; + #gpio-cells = <2>; + }; + + max7310_b: gpio@32 { + compatible = "maxim,max7310"; + reg = <0x32>; + gpio-controller; + #gpio-cells = <2>; + }; + + max7310_c: gpio@34 { + compatible = "maxim,max7310"; + reg = <0x34>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; @@ -265,6 +292,13 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + pinctrl_pwm3: pwm1grp { fsl,pins = < MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index d6c69ec443149da28012034ceea65ac2ba522539..f74a8ded515f22b9985b8d48b370a45c34e9d88e 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -53,6 +53,7 @@ interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; + interrupt-parent = <&intc>; }; clocks { @@ -82,7 +83,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - interrupt-parent = <&intc>; + interrupt-parent = <&gpc>; ranges; dma_apbh: dma-apbh@00110000 { @@ -122,6 +123,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x00a00600 0x20>; interrupts = <1 13 0xf01>; + interrupt-parent = <&intc>; clocks = <&clks IMX6QDL_CLK_TWD>; }; @@ -357,6 +359,7 @@ clocks = <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_PWM1>; clock-names = "ipg", "per"; + status = "disabled"; }; pwm2: pwm@02084000 { @@ -367,6 +370,7 @@ clocks = <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_PWM2>; clock-names = "ipg", "per"; + status = "disabled"; }; pwm3: pwm@02088000 { @@ -377,6 +381,7 @@ clocks = <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_PWM3>; clock-names = "ipg", "per"; + status = "disabled"; }; pwm4: pwm@0208c000 { @@ -387,6 +392,7 @@ clocks = <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_PWM4>; clock-names = "ipg", "per"; + status = "disabled"; }; can1: flexcan@02090000 { @@ -598,7 +604,7 @@ regulator-name = "vddpu"; regulator-min-microvolt = <725000>; regulator-max-microvolt = <1450000>; - regulator-always-on; + regulator-enable-ramp-delay = <150>; anatop-reg-offset = <0x140>; anatop-vol-bit-shift = <9>; anatop-vol-bit-width = <5>; @@ -658,7 +664,7 @@ #size-cells = <1>; ranges = <0 0x020cc000 0x4000>; - snvs-rtc-lp@34 { + snvs_rtc: snvs-rtc-lp@34 { compatible = "fsl,sec-v4.0-mon-rtc-lp"; reg = <0x34 0x58>; interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>, @@ -693,8 +699,19 @@ gpc: gpc@020dc000 { compatible = "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>, <0 90 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; + pu-supply = <®_pu>; + clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>, + <&clks IMX6QDL_CLK_GPU3D_SHADER>, + <&clks IMX6QDL_CLK_GPU2D_CORE>, + <&clks IMX6QDL_CLK_GPU2D_AXI>, + <&clks IMX6QDL_CLK_OPENVG_AXI>, + <&clks IMX6QDL_CLK_VPU_AXI>; + #power-domain-cells = <1>; }; gpr: iomuxc-gpr@020e0000 { @@ -845,6 +862,7 @@ clocks = <&clks IMX6QDL_CLK_USBOH3>; fsl,usbphy = <&usbphy2>; fsl,usbmisc = <&usbmisc 1>; + dr_mode = "host"; status = "disabled"; }; @@ -854,6 +872,7 @@ interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>; fsl,usbmisc = <&usbmisc 2>; + dr_mode = "host"; status = "disabled"; }; @@ -863,6 +882,7 @@ interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>; fsl,usbmisc = <&usbmisc 3>; + dr_mode = "host"; status = "disabled"; }; @@ -1022,19 +1042,24 @@ reg = <0x021e0000 0x4000>; status = "disabled"; - port@0 { - reg = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; - mipi_mux_0: endpoint { - remote-endpoint = <&ipu1_di0_mipi>; + mipi_mux_0: endpoint { + remote-endpoint = <&ipu1_di0_mipi>; + }; }; - }; - port@1 { - reg = <1>; + port@1 { + reg = <1>; - mipi_mux_1: endpoint { - remote-endpoint = <&ipu1_di1_mipi>; + mipi_mux_1: endpoint { + remote-endpoint = <&ipu1_di1_mipi>; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts new file mode 100644 index 0000000000000000000000000000000000000000..64f7decf1fdcb5b2593377105521a0ff9aa3fb78 --- /dev/null +++ b/arch/arm/boot/dts/imx6sl-warp.dts @@ -0,0 +1,262 @@ +/* + * Copyright 2014, 2015 O.S. Systems Software LTDA. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include +#include "imx6sl.dtsi" + +/ { + model = "WaRP Board"; + compatible = "warp,imx6sl-warp", "fsl,imx6sl"; + + memory { + reg = <0x80000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 0 0>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 2 0>; + enable-active-high; + }; + + reg_1p8v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + usdhc3_pwrseq: usdhc3_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ + <&gpio3 25 GPIO_ACTIVE_LOW>, /* BT_REG_ON */ + <&gpio4 4 GPIO_ACTIVE_LOW>, /* BT_WAKE */ + <&gpio4 6 GPIO_ACTIVE_LOW>; /* BT_RST_N */ + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <4>; + non-removable; + keep-power-in-suspend; + enable-sdio-wakeup; + mmc-pwrseq = <&usdhc3_pwrseq>; + status = "okay"; +}; + +&iomuxc { + imx6sl-warp { + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x41b0b1 + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x41b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6SL_PAD_EPDC_D12__UART2_RX_DATA 0x41b0b1 + MX6SL_PAD_EPDC_D13__UART2_TX_DATA 0x41b0b1 + MX6SL_PAD_EPDC_D14__UART2_RTS_B 0x4130B1 + MX6SL_PAD_EPDC_D15__UART2_CTS_B 0x4130B1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6SL_PAD_AUD_RXC__UART3_RX_DATA 0x41b0b1 + MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x41b0b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x417059 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x410059 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x417059 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x417059 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x417059 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x417059 + MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x417059 + MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x417059 + MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x417059 + MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x417059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170b9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100b9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x4170b9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x4170b9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x4170b9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x4170b9 + MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x4170b9 + MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170b9 + MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170b9 + MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170f9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100f9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x4170f9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x4170f9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x4170f9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x4170f9 + MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x4170f9 + MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170f9 + MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170f9 + MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x417059 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x410059 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x417059 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x417059 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x417059 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x417059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x4170b9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x4100b9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x4170b9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x4170b9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x4170b9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x4170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x4170f9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x4100f9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x4170f9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x4170f9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x4170f9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x4170f9 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 36ab8e054cee0a8ff5fcc1fb6938dc1d62a1e09f..a78e715e3982f7f821d01f386cc592e046e172f5 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -72,6 +72,7 @@ interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; + interrupt-parent = <&intc>; }; clocks { @@ -95,7 +96,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - interrupt-parent = <&intc>; + interrupt-parent = <&gpc>; ranges; ocram: sram@00900000 { @@ -568,7 +569,7 @@ #size-cells = <1>; ranges = <0 0x020cc000 0x4000>; - snvs-rtc-lp@34 { + snvs_rtc: snvs-rtc-lp@34 { compatible = "fsl,sec-v4.0-mon-rtc-lp"; reg = <0x34 0x58>; interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>, @@ -603,7 +604,14 @@ gpc: gpc@020dc000 { compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; + pu-supply = <®_pu>; + clocks = <&clks IMX6SL_CLK_GPU2D_OVG>, + <&clks IMX6SL_CLK_GPU2D_PODF>; + #power-domain-cells = <1>; }; gpr: iomuxc-gpr@020e0000 { @@ -699,6 +707,7 @@ interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_USBOH3>; fsl,usbmisc = <&usbmisc 2>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts new file mode 100644 index 0000000000000000000000000000000000000000..c76b87cba275fcb043289bc5eede363e6ab3c90c --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -0,0 +1,143 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "imx6sx-sdb.dtsi" + +/ { + model = "Freescale i.MX6 SoloX SDB RevA Board"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&qspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi2>; + status = "okay"; + + flash0: s25fl128s@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl128s"; + spi-max-frequency = <66000000>; + }; + + flash1: s25fl128s@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl128s"; + spi-max-frequency = <66000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 32f07d6b404239afd3c58c43ae2cb032478a37b5..0bfc4e7865b2995fcd009fe6abc9f83f5129cb5d 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -1,197 +1,40 @@ /* - * Copyright (C) 2014 Freescale Semiconductor, Inc. + * Copyright (C) 2015 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -/dts-v1/; - -#include -#include -#include "imx6sx.dtsi" +#include "imx6sx-sdb.dtsi" / { - model = "Freescale i.MX6 SoloX SDB Board"; - compatible = "fsl,imx6sx-sdb", "fsl,imx6sx"; - - chosen { - stdout-path = &uart1; - }; - - memory { - reg = <0x80000000 0x40000000>; - }; - - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm3 0 5000000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - volume-up { - label = "Volume Up"; - gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - volume-down { - label = "Volume Down"; - gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vcc_sd3: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_vcc_sd3>; - regulator-name = "VCC_SD3"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usb_otg1_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg1>; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usb_otg2_vbus: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg2>; - regulator-name = "usb_otg2_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_psu_5v: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "PSU-5V0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_lcd_3v3: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "lcd-3v3"; - gpio = <&gpio3 27 0>; - enable-active-high; - }; - - reg_peri_3v3: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_peri_3v3>; - regulator-name = "peri_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - reg_enet_3v3: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_3v3>; - regulator-name = "enet_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; - }; - }; - - sound { - compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962"; - model = "wm8962-audio"; - ssi-controller = <&ssi2>; - audio-codec = <&codec>; - audio-routing = - "Headphone Jack", "HPOUTL", - "Headphone Jack", "HPOUTR", - "Ext Spk", "SPKOUTL", - "Ext Spk", "SPKOUTR", - "AMIC", "MICBIAS", - "IN3R", "AMIC"; - mux-int-port = <2>; - mux-ext-port = <6>; - }; -}; - -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux>; - status = "okay"; + model = "Freescale i.MX6 SoloX SDB RevB Board"; }; -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet1>; - phy-supply = <®_enet_3v3>; - phy-mode = "rgmii"; - phy-handle = <ðphy1>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy1: ethernet-phy@1 { - reg = <1>; - }; - - ethphy2: ethernet-phy@2 { - reg = <2>; - }; - }; +&cpu0 { + operating-points = < + /* kHz uV */ + 996000 1250000 + 792000 1175000 + 396000 1175000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC uV */ + 996000 1250000 + 792000 1175000 + 396000 1175000 + >; }; -&fec2 { +&i2c1 { + clock-frequency = <100000>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet2>; - phy-mode = "rgmii"; - phy-handle = <ðphy2>; + pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; pmic: pfuze100@08 { - compatible = "fsl,pfuze100"; + compatible = "fsl,pfuze200"; reg = <0x08>; regulators { @@ -203,14 +46,6 @@ regulator-ramp-delay = <6250>; }; - sw1c_reg: sw1c { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - sw2_reg: sw2 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; @@ -232,11 +67,6 @@ regulator-always-on; }; - sw4_reg: sw4 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; - }; - swbst_reg: swbst { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5150000>; @@ -292,401 +122,24 @@ }; }; -&i2c4 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c4>; - status = "okay"; - - codec: wm8962@1a { - compatible = "wlf,wm8962"; - reg = <0x1a>; - clocks = <&clks IMX6SX_CLK_AUDIO>; - DCVDD-supply = <&vgen4_reg>; - DBVDD-supply = <&vgen4_reg>; - AVDD-supply = <&vgen4_reg>; - CPVDD-supply = <&vgen4_reg>; - MICVDD-supply = <&vgen3_reg>; - PLLVDD-supply = <&vgen4_reg>; - SPKVDD1-supply = <®_psu_5v>; - SPKVDD2-supply = <®_psu_5v>; - }; -}; - -&lcdif1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd>; - lcd-supply = <®_lcd_3v3>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <16>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33500000>; - hactive = <800>; - vactive = <480>; - hback-porch = <89>; - hfront-porch = <164>; - vback-porch = <23>; - vfront-porch = <10>; - hsync-len = <10>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; -}; - -&pwm3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm3>; - status = "okay"; -}; - -&snvs_poweroff { - status = "okay"; -}; - &qspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_qspi2>; status = "okay"; - flash0: s25fl128s@0 { - reg = <0>; + flash0: n25q256a@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl128s"; - spi-max-frequency = <66000000>; + compatible = "micron,n25q256a"; + spi-max-frequency = <29000000>; + reg = <0>; }; - flash1: s25fl128s@1 { - reg = <1>; + flash1: n25q256a@1 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl128s"; - spi-max-frequency = <66000000>; - }; -}; - -&ssi2 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart5 { /* for bluetooth */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - fsl,uart-has-rtscts; - status = "okay"; -}; - -&usbotg1 { - vbus-supply = <®_usb_otg1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg1_id>; - status = "okay"; -}; - -&usbotg2 { - vbus-supply = <®_usb_otg2_vbus>; - dr_mode = "host"; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - non-removable; - no-1-8-v; - keep-power-in-suspend; - enable-sdio-wakeup; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc3>; - pinctrl-1 = <&pinctrl_usdhc3_100mhz>; - pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - bus-width = <8>; - cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; - wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; - keep-power-in-suspend; - enable-sdio-wakeup; - vmmc-supply = <&vcc_sd3>; - status = "okay"; -}; - -&usdhc4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc4>; - cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>; - wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&iomuxc { - imx6x-sdb { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x130b0 - MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x130b0 - MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x120b0 - MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x130b0 - MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0 - >; - }; - - pinctrl_enet1: enet1grp { - fsl,pins = < - MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1 - MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1 - MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b1 - MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1 - MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1 - MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1 - MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1 - MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1 - MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081 - MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081 - MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081 - MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081 - MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081 - MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081 - MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91 - >; - }; - - pinctrl_enet_3v3: enet3v3grp { - fsl,pins = < - MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000 - >; - }; - - pinctrl_enet2: enet2grp { - fsl,pins = < - MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9 - MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1 - MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1 - MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1 - MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1 - MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1 - MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081 - MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081 - MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081 - MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081 - MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081 - MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081 - >; - }; - - pinctrl_gpio_keys: gpio_keysgrp { - fsl,pins = < - MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059 - MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1 - MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1 - >; - }; - - pinctrl_i2c4: i2c4grp { - fsl,pins = < - MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1 - MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x4001b8b1 - >; - }; - - pinctrl_lcd: lcdgrp { - fsl,pins = < - MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0 - MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0 - MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0 - MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0 - MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0 - MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0 - MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0 - MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0 - MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0 - MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0 - MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0 - MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0 - MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0 - MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0 - MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0 - MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0 - MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0 - MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0 - MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0 - MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0 - MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0 - MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0 - MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0 - MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0 - MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0 - MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0 - MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0 - MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0 - MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 - >; - }; - - pinctrl_peri_3v3: peri3v3grp { - fsl,pins = < - MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000 - >; - }; - - pinctrl_pwm3: pwm3grp-1 { - fsl,pins = < - MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0 - >; - }; - - pinctrl_qspi2: qspi2grp { - fsl,pins = < - MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x70f1 - MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x70f1 - MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x70f1 - MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x70f1 - MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x70f1 - MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x70f1 - MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x70f1 - MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x70f1 - MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x70f1 - MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x70f1 - MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x70f1 - MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x70f1 - >; - }; - - pinctrl_vcc_sd3: vccsd3grp { - fsl,pins = < - MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 - >; - }; - - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1 - MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1 - MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1 - MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1 - >; - }; - - pinctrl_usb_otg1: usbotg1grp { - fsl,pins = < - MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0 - >; - }; - - pinctrl_usb_otg1_id: usbotg1idgrp { - fsl,pins = < - MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059 - >; - }; - - pinctrl_usb_otg2: usbot2ggrp { - fsl,pins = < - MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x10b0 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059 - MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059 - MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059 - MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059 - MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059 - MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059 - MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059 - MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059 - MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059 - MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059 - MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059 - MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059 - MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059 - MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059 - MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059 - MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */ - MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */ - >; - }; - - pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { - fsl,pins = < - MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9 - MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9 - MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9 - MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9 - MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9 - MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9 - MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9 - MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9 - MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9 - MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { - fsl,pins = < - MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9 - MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9 - MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9 - MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9 - MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9 - MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9 - MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9 - MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9 - MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9 - MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9 - >; - }; - - pinctrl_usdhc4: usdhc4grp { - fsl,pins = < - MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 - MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 - MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 - MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 - MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 - MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 - MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */ - MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */ - >; - }; + compatible = "micron,n25q256a"; + spi-max-frequency = <29000000>; + reg = <1>; }; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..cef04cef3a807f44efdc6a44fb754e0eb4b40b1e --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -0,0 +1,562 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include +#include +#include "imx6sx.dtsi" + +/ { + model = "Freescale i.MX6 SoloX SDB Board"; + compatible = "fsl,imx6sx-sdb", "fsl,imx6sx"; + + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x80000000 0x40000000>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + volume-up { + label = "Volume Up"; + gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vcc_sd3: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vcc_sd3>; + regulator-name = "VCC_SD3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg1_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg2>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_psu_5v: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "PSU-5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_lcd_3v3: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "lcd-3v3"; + gpio = <&gpio3 27 0>; + enable-active-high; + }; + + reg_peri_3v3: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_peri_3v3>; + regulator-name = "peri_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_enet_3v3: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_3v3>; + regulator-name = "enet_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + }; + }; + + sound { + compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + ssi-controller = <&ssi2>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <6>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-supply = <®_enet_3v3>; + phy-mode = "rgmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rgmii"; + phy-handle = <ðphy2>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + codec: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6SX_CLK_AUDIO>; + DCVDD-supply = <&vgen4_reg>; + DBVDD-supply = <&vgen4_reg>; + AVDD-supply = <&vgen4_reg>; + CPVDD-supply = <&vgen4_reg>; + MICVDD-supply = <&vgen3_reg>; + PLLVDD-supply = <&vgen4_reg>; + SPKVDD1-supply = <®_psu_5v>; + SPKVDD2-supply = <®_psu_5v>; + }; +}; + +&lcdif1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + lcd-supply = <®_lcd_3v3>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <16>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart5 { /* for bluetooth */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + enable-sdio-wakeup; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; + keep-power-in-suspend; + enable-sdio-wakeup; + vmmc-supply = <&vcc_sd3>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&iomuxc { + imx6x-sdb { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x130b0 + MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x130b0 + MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x120b0 + MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x130b0 + MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1 + MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1 + MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b1 + MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1 + MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1 + MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1 + MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1 + MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1 + MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081 + MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081 + MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081 + MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081 + MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081 + MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081 + MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91 + >; + }; + + pinctrl_enet_3v3: enet3v3grp { + fsl,pins = < + MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9 + MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1 + MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1 + MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1 + MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1 + MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1 + MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081 + MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081 + MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081 + MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081 + MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081 + MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059 + MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1 + MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1 + MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x4001b8b1 + >; + }; + + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0 + MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0 + MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0 + MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0 + MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0 + MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0 + MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0 + MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0 + MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0 + MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0 + MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0 + MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0 + MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0 + MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0 + MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0 + MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0 + MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0 + MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0 + MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0 + MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0 + MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0 + MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0 + MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0 + MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0 + MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0 + MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0 + MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0 + MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0 + MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 + >; + }; + + pinctrl_peri_3v3: peri3v3grp { + fsl,pins = < + MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000 + >; + }; + + pinctrl_pwm3: pwm3grp-1 { + fsl,pins = < + MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0 + >; + }; + + pinctrl_qspi2: qspi2grp { + fsl,pins = < + MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x70f1 + MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x70f1 + MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x70f1 + MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x70f1 + MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x70f1 + MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x70f1 + MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x70f1 + MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x70f1 + MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x70f1 + MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x70f1 + MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x70f1 + MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x70f1 + >; + }; + + pinctrl_vcc_sd3: vccsd3grp { + fsl,pins = < + MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1 + MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1 + MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1 + MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usb_otg2: usbot2ggrp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x10b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059 + MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059 + MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059 + MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059 + MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059 + MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059 + MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */ + MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */ + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 + MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */ + MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */ + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 7a24fee1e7aecf7bc16df8c241e42a5ba5e5e561..708175d59b9c31085877da68ad378765fe701369 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -88,6 +88,7 @@ interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; + interrupt-parent = <&intc>; }; clocks { @@ -131,7 +132,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - interrupt-parent = <&intc>; + interrupt-parent = <&gpc>; ranges; pmu { @@ -666,7 +667,7 @@ #size-cells = <1>; ranges = <0 0x020cc000 0x4000>; - snvs-rtc-lp@34 { + snvs_rtc: snvs-rtc-lp@34 { compatible = "fsl,sec-v4.0-mon-rtc-lp"; reg = <0x34 0x58>; interrupts = , ; @@ -700,7 +701,10 @@ gpc: gpc@020dc000 { compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; interrupts = ; + interrupt-parent = <&intc>; }; iomuxc: iomuxc@020e0000 { @@ -763,6 +767,7 @@ fsl,usbmisc = <&usbmisc 2>; phy_type = "hsic"; fsl,anatop = <&anatop>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/kirkwood-nas2big.dts b/arch/arm/boot/dts/kirkwood-nas2big.dts new file mode 100644 index 0000000000000000000000000000000000000000..7427ec50b8290790e299b52547910b1db67d39ee --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nas2big.dts @@ -0,0 +1,143 @@ +/* + * Device Tree file for LaCie 2Big NAS + * + * Copyright (C) 2015 Seagate + * + * Author: Simon Guinot + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +/dts-v1/; + +#include "kirkwood-netxbig.dtsi" + +/ { + model = "LaCie 2Big NAS"; + compatible = "lacie,nas2big", "lacie,netxbig", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + rtc@10300 { + /* The on-chip RTC is not powered (no supercap). */ + status = "disabled"; + }; + spi@10600 { + /* + * A NAND flash is used instead of an SPI flash for + * the other netxbig-compatible boards. + */ + status = "disabled"; + }; + }; + + fan { + /* + * An I2C fan controller (GMT G762) is used but alarm is + * wired to a separate GPIO. + */ + compatible = "gpio-fan"; + alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; + }; + + regulators: regulators { + status = "okay"; + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "hdd1power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; + }; + clocks { + g762_clk: g762-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; + + /* + * An external I2C RTC (Dallas DS1337S+) is used. This allows + * to power-up the board on an RTC alarm. The external RTC can + * be kept powered, even when the SoC is off. + */ + rtc@68 { + compatible = "dallas,ds1307"; + reg = <0x68>; + interrupts = <43>; + }; + g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; + }; +}; + +&nand { + chip-delay = <50>; + status = "okay"; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "uImage"; + reg = <0x100000 0x1000000>; + }; + + partition@1100000 { + label = "root"; + reg = <0x1100000 0x8000000>; + }; + + partition@9100000 { + label = "unused"; + reg = <0x9100000 0x6f00000>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-net2big.dts b/arch/arm/boot/dts/kirkwood-net2big.dts index 53dc37a3b6875dd10fcbe9babee959de4f5a95bd..13a44773b6dfa39fe02d4ce86f3344808e498d1b 100644 --- a/arch/arm/boot/dts/kirkwood-net2big.dts +++ b/arch/arm/boot/dts/kirkwood-net2big.dts @@ -27,6 +27,11 @@ device_type = "memory"; reg = <0x00000000 0x10000000>; }; + + fan { + compatible = "gpio-fan"; + alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; + }; }; ®ulators { diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index b67ede515bcdeb9decd615aac0a7b30b0951a30d..548441384d2a39488d7daffef79ed6c707576a86 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -150,5 +150,25 @@ interrupts = <0 15 1>; status = "disabled"; }; + + spifc: spi@c1108c80 { + compatible = "amlogic,meson6-spifc"; + reg = <0xc1108c80 0x80>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk81>; + status = "disabled"; + }; + + ethmac: ethernet@c9410000 { + compatible = "amlogic,meson6-dwmac", "snps,dwmac"; + reg = <0xc9410000 0x10000 + 0xc1108108 0x4>; + interrupts = <0 8 1>; + interrupt-names = "macirq"; + clocks = <&clk81>; + clock-names = "stmmaceth"; + status = "disabled"; + }; }; }; /* end of / */ diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts index d7d351a689447ea6449951200c632e19febf3b3b..1237faa63ce636d5c8c85d65b4cc9e32d9a5eab7 100644 --- a/arch/arm/boot/dts/meson6-atv1200.dts +++ b/arch/arm/boot/dts/meson6-atv1200.dts @@ -64,3 +64,7 @@ &uart_AO { status = "okay"; }; + +ðmac { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts new file mode 100644 index 0000000000000000000000000000000000000000..4f536bb1f0024a445a7b289988d62bcb39e70af7 --- /dev/null +++ b/arch/arm/boot/dts/meson8-minix-neo-x8.dts @@ -0,0 +1,128 @@ +/* + * Copyright 2014 Beniamino Galvani + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include +#include "meson8.dtsi" + +/ { + model = "MINIX NEO-X8"; + compatible = "minix,neo-x8", "amlogic,meson8"; + + aliases { + serial0 = &uart_AO; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + + blue { + label = "x8:blue:power"; + gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&i2c_AO { + status = "okay"; + pinctrl-0 = <&i2c_ao_pins>; + pinctrl-names = "default"; + + pmic@32 { + compatible = "ricoh,rn5t618"; + reg = <0x32>; + + regulators { + }; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&spifc { + status = "okay"; + pinctrl-0 = <&spi_nor_pins>; + pinctrl-names = "default"; + + spi-flash@0 { + compatible = "mxicy,mx25l1606e"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <30000000>; + + partition@0 { + label = "boot"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "env"; + reg = <0x100000 0x10000>; + }; + }; +}; + +&ir_receiver { + status = "okay"; + pinctrl-0 = <&ir_recv_pins>; + pinctrl-names = "default"; +}; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_pins>; + pnictrl-names = "default"; +}; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 1f442a7fe03b758905205630ce3409105a88625a..a2ddcb8c545a01ebdcc86d3c011e348f5295619b 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -43,6 +43,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include /include/ "meson.dtsi" / { @@ -89,4 +90,71 @@ compatible = "fixed-clock"; clock-frequency = <141666666>; }; + + pinctrl: pinctrl@c1109880 { + compatible = "amlogic,meson8-pinctrl"; + reg = <0xc1109880 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio: banks@c11080b0 { + reg = <0xc11080b0 0x28>, + <0xc11080e8 0x18>, + <0xc1108120 0x18>, + <0xc1108030 0x30>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_ao: ao-bank@c1108030 { + reg = <0xc8100014 0x4>, + <0xc810002c 0x4>, + <0xc8100024 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + }; + }; + + i2c_ao_pins: i2c_mst_ao { + mux { + groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao"; + function = "i2c_mst_ao"; + }; + }; + + spi_nor_pins: nor { + mux { + groups = "nor_d", "nor_q", "nor_c", "nor_cs"; + function = "nor"; + }; + }; + + ir_recv_pins: remote { + mux { + groups = "remote_input"; + function = "remote"; + }; + }; + + eth_pins: ethernet { + mux { + groups = "eth_tx_clk_50m", "eth_tx_en", + "eth_txd1", "eth_txd0", + "eth_rx_clk_in", "eth_rx_dv", + "eth_rxd1", "eth_rxd0", "eth_mdio", + "eth_mdc"; + function = "ethernet"; + }; + }; + }; + }; /* end of / */ diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi index 106b61b1003032e88ca8a679ed1d2d56da561f10..88b3cb128698fb9d2e0abf9cfc46134b4538477e 100644 --- a/arch/arm/boot/dts/mt6589.dtsi +++ b/arch/arm/boot/dts/mt6589.dtsi @@ -138,5 +138,10 @@ clocks = <&uart_clk>; status = "disabled"; }; + + wdt: watchdog@010000000 { + compatible = "mediatek,mt6589-wdt"; + reg = <0x10000000 0x44>; + }; }; }; diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire-classic.dtsi index 9565199bce7a0986e3641d0c5e421a6cfefef12c..4907c5085d4bd3c4947b4be2ae7d65611e0d79f9 100644 --- a/arch/arm/boot/dts/nspire-classic.dtsi +++ b/arch/arm/boot/dts/nspire-classic.dtsi @@ -51,6 +51,11 @@ compatible = "lsi,nspire-classic-ahb-divider"; }; + +&vbus_reg { + gpio = <&gpio 5 0>; +}; + / { memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts index 375b924f60d80326833c13e7fbfa5f54c87d37aa..08e0b81b338527463623244d91798364e20905f7 100644 --- a/arch/arm/boot/dts/nspire-cx.dts +++ b/arch/arm/boot/dts/nspire-cx.dts @@ -69,6 +69,10 @@ 0x0709001d 0x070a0033 >; }; +&vbus_reg { + gpio = <&gpio 2 0>; +}; + / { model = "TI-NSPIRE CX"; compatible = "ti,nspire-cx"; diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi index a22ffe633b49b36a3f0d49a243ef7e04841f1af2..390c91aea16d479e1b7cc10b6a82a278d2732c8f 100644 --- a/arch/arm/boot/dts/nspire.dtsi +++ b/arch/arm/boot/dts/nspire.dtsi @@ -54,6 +54,20 @@ clocks = <&ahb_clk>; }; + usb_phy: usb_phy { + compatible = "usb-nop-xceiv"; + }; + + vbus_reg: vbus_reg { + compatible = "regulator-fixed"; + + regulator-name = "USB VBUS output"; + regulator-type = "voltage"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -65,8 +79,12 @@ }; usb0: usb@B0000000 { + compatible = "lsi,zevio-usb"; reg = <0xB0000000 0x1000>; interrupts = <8>; + + usb-phy = <&usb_phy>; + vbus-supply = <&vbus_reg>; }; usb1: usb@B4000000 { @@ -105,8 +123,11 @@ ranges; gpio: gpio@90000000 { + compatible = "lsi,zevio-gpio"; reg = <0x90000000 0x1000>; interrupts = <7>; + gpio-controller; + #gpio-cells = <2>; }; fast_timer: timer@90010000 { diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index e2b2e93d7b6160f364bcb4832cc593c09f9627ac..5b9a376cc31eee01e38a0cbd8a5cb16b8bf6c04f 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -14,47 +14,65 @@ compatible = "ti,omap2420", "ti,omap2"; ocp { - prcm: prcm@48008000 { - compatible = "ti,omap2-prcm"; - reg = <0x48008000 0x1000>; + l4: l4@48000000 { + compatible = "ti,omap2-l4", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48000000 0x100000>; - prcm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + prcm: prcm@8000 { + compatible = "ti,omap2-prcm"; + reg = <0x8000 0x1000>; - prcm_clockdomains: clockdomains { - }; - }; + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - scrm: scrm@48000000 { - compatible = "ti,omap2-scrm"; - reg = <0x48000000 0x1000>; + prcm_clockdomains: clockdomains { + }; + }; - scrm_clocks: clocks { + scm: scm@0 { + compatible = "ti,omap2-scm", "simple-bus"; + reg = <0x0 0x1000>; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; + ranges = <0 0x0 0x1000>; + + omap2420_pmx: pinmux@30 { + compatible = "ti,omap2420-padconf", + "pinctrl-single"; + reg = <0x30 0x0113>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <8>; + pinctrl-single,function-mask = <0x3f>; + }; + + scm_conf: scm_conf@270 { + compatible = "syscon"; + reg = <0x270 0x100>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + scm_clockdomains: clockdomains { + }; }; - scrm_clockdomains: clockdomains { + counter32k: counter@4000 { + compatible = "ti,omap-counter32k"; + reg = <0x4000 0x20>; + ti,hwmods = "counter_32k"; }; }; - counter32k: counter@48004000 { - compatible = "ti,omap-counter32k"; - reg = <0x48004000 0x20>; - ti,hwmods = "counter_32k"; - }; - - omap2420_pmx: pinmux@48000030 { - compatible = "ti,omap2420-padconf", "pinctrl-single"; - reg = <0x48000030 0x0113>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,register-width = <8>; - pinctrl-single,function-mask = <0x3f>; - }; - gpio1: gpio@48018000 { compatible = "ti,omap2-gpio"; reg = <0x48018000 0x200>; diff --git a/arch/arm/boot/dts/omap2430-clocks.dtsi b/arch/arm/boot/dts/omap2430-clocks.dtsi index 805f75df1cf2011474a8fa119c95523acaffb163..93fed68839b9f66f8112713b28c92e7df86ea14a 100644 --- a/arch/arm/boot/dts/omap2430-clocks.dtsi +++ b/arch/arm/boot/dts/omap2430-clocks.dtsi @@ -8,12 +8,12 @@ * published by the Free Software Foundation. */ -&scrm_clocks { +&scm_clocks { mcbsp3_mux_fck: mcbsp3_mux_fck { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_96m_ck>, <&mcbsp_clks>; - reg = <0x02e8>; + reg = <0x78>; }; mcbsp3_fck: mcbsp3_fck { @@ -27,7 +27,7 @@ compatible = "ti,composite-mux-clock"; clocks = <&func_96m_ck>, <&mcbsp_clks>; ti,bit-shift = <2>; - reg = <0x02e8>; + reg = <0x78>; }; mcbsp4_fck: mcbsp4_fck { @@ -41,7 +41,7 @@ compatible = "ti,composite-mux-clock"; clocks = <&func_96m_ck>, <&mcbsp_clks>; ti,bit-shift = <4>; - reg = <0x02e8>; + reg = <0x78>; }; mcbsp5_fck: mcbsp5_fck { diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 0dc8de2782b1871772150b3a62ab7a92685da56a..11a7963be0035a002fa77c2bec6809b34444e584 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -14,60 +14,73 @@ compatible = "ti,omap2430", "ti,omap2"; ocp { - prcm: prcm@49006000 { - compatible = "ti,omap2-prcm"; - reg = <0x49006000 0x1000>; + l4_wkup: l4_wkup@49000000 { + compatible = "ti,omap2-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x49000000 0x31000>; - prcm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + prcm: prcm@6000 { + compatible = "ti,omap2-prcm"; + reg = <0x6000 0x1000>; - prcm_clockdomains: clockdomains { - }; - }; - - scrm: scrm@49002000 { - compatible = "ti,omap2-scrm"; - reg = <0x49002000 0x1000>; + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; + prcm_clockdomains: clockdomains { + }; }; - scrm_clockdomains: clockdomains { + scm: scm@2000 { + compatible = "ti,omap2-scm", "simple-bus"; + reg = <0x2000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x1000>; + + omap2430_pmx: pinmux@30 { + compatible = "ti,omap2430-padconf", + "pinctrl-single"; + reg = <0x30 0x0154>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <8>; + pinctrl-single,function-mask = <0x3f>; + }; + + scm_conf: scm_conf@270 { + compatible = "syscon"; + reg = <0x270 0x240>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0x230 0x4>; + syscon = <&scm_conf>; + pbias_mmc_reg: pbias_mmc_omap2430 { + regulator-name = "pbias_mmc_omap2430"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; + + scm_clockdomains: clockdomains { + }; }; - }; - - counter32k: counter@49020000 { - compatible = "ti,omap-counter32k"; - reg = <0x49020000 0x20>; - ti,hwmods = "counter_32k"; - }; - - omap2430_pmx: pinmux@49002030 { - compatible = "ti,omap2430-padconf", "pinctrl-single"; - reg = <0x49002030 0x0154>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,register-width = <8>; - pinctrl-single,function-mask = <0x3f>; - }; - - omap2_scm_general: tisyscon@49002270 { - compatible = "syscon"; - reg = <0x49002270 0x240>; - }; - pbias_regulator: pbias_regulator { - compatible = "ti,pbias-omap"; - reg = <0x230 0x4>; - syscon = <&omap2_scm_general>; - pbias_mmc_reg: pbias_mmc_omap2430 { - regulator-name = "pbias_mmc_omap2430"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; + counter32k: counter@20000 { + compatible = "ti,omap-counter32k"; + reg = <0x20000 0x20>; + ti,hwmods = "counter_32k"; }; }; diff --git a/arch/arm/boot/dts/omap24xx-clocks.dtsi b/arch/arm/boot/dts/omap24xx-clocks.dtsi index a1365ca926eb6a4bcd52f1099e7c1e5c882f8664..63965b8769732f7e2e30708c30b50ad3f9ee6968 100644 --- a/arch/arm/boot/dts/omap24xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap24xx-clocks.dtsi @@ -7,13 +7,13 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -&scrm_clocks { +&scm_clocks { mcbsp1_mux_fck: mcbsp1_mux_fck { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_96m_ck>, <&mcbsp_clks>; ti,bit-shift = <2>; - reg = <0x0274>; + reg = <0x4>; }; mcbsp1_fck: mcbsp1_fck { @@ -27,7 +27,7 @@ compatible = "ti,composite-mux-clock"; clocks = <&func_96m_ck>, <&mcbsp_clks>; ti,bit-shift = <6>; - reg = <0x0274>; + reg = <0x4>; }; mcbsp2_fck: mcbsp2_fck { diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 25f7b0a22114ee6928e58e27ceeb61cf07b04c79..7c4dca122a91d99a9848a691ce96a917294f59eb 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -60,7 +60,6 @@ ti,model = "omap3beagle"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; gpio_keys { @@ -150,7 +149,6 @@ compatible = "arm,coresight-etb10", "arm,primecell"; reg = <0x5401b000 0x1000>; - coresight-default-sink; clocks = <&emu_src_ck>; clock-names = "apb_pclk"; port { diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index c792391ef090f11a77add8041f6c9e63ec3340e3..a5474113cd50647f4b945b8db7ea3ff3a7643c83 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -71,7 +71,6 @@ ti,model = "omap3beagle"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; gpio_keys { @@ -145,7 +144,6 @@ compatible = "arm,coresight-etb10", "arm,primecell"; reg = <0x5401b000 0x1000>; - coresight-default-sink; clocks = <&emu_src_ck>; clock-names = "apb_pclk"; port { @@ -379,3 +377,55 @@ }; }; }; + +&gpmc { + status = "ok"; + ranges = <0 0 0x30000000 0x1000000>; /* CS0 space, 16MB */ + + /* Chip select 0 */ + nand@0,0 { + reg = <0 0 4>; /* NAND I/O window, 4 bytes */ + interrupts = <20>; + ti,nand-ecc-opt = "ham1"; + nand-bus-width = <16>; + #address-cells = <1>; + #size-cells = <1>; + + gpmc,device-width = <2>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <36>; + gpmc,cs-wr-off-ns = <36>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <24>; + gpmc,adv-wr-off-ns = <36>; + gpmc,oe-on-ns = <6>; + gpmc,oe-off-ns = <48>; + gpmc,we-on-ns = <6>; + gpmc,we-off-ns = <30>; + gpmc,rd-cycle-ns = <72>; + gpmc,wr-cycle-ns = <72>; + gpmc,access-ns = <54>; + gpmc,wr-access-ns = <30>; + + partition@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + partition@80000 { + label = "U-Boot"; + reg = <0x80000 0x1e0000>; + }; + partition@1c0000 { + label = "U-Boot Env"; + reg = <0x260000 0x20000>; + }; + partition@280000 { + label = "Kernel"; + reg = <0x280000 0x400000>; + }; + partition@780000 { + label = "Filesystem"; + reg = <0x680000 0xf980000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts index 0ab748cf7749f18d90ad225a5d0aabac564fc53f..f5b5a1d96cd740920ab215f2a7b3fc2fdaa9136e 100644 --- a/arch/arm/boot/dts/omap3-cm-t3517.dts +++ b/arch/arm/boot/dts/omap3-cm-t3517.dts @@ -133,6 +133,16 @@ non-removable; bus-width = <4>; cap-power-off-card; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; /* gpio 145 */ + ref-clock-frequency = <38400000>; + }; }; &dss { diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts index 46eadb21b5ef5e97882e581f6e29f33bda2cd209..2294f5b0aa102d9195aa93b33a9e298ac91cba26 100644 --- a/arch/arm/boot/dts/omap3-cm-t3730.dts +++ b/arch/arm/boot/dts/omap3-cm-t3730.dts @@ -73,6 +73,16 @@ non-removable; bus-width = <4>; cap-power-off-card; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */ + ref-clock-frequency = <38400000>; + }; }; &dss { diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi index d9e92b654f851e879fe8fb4d74bfdf66c4cd7af9..046cd7733c4f9afac93d5f5382b61fd228759b8c 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi @@ -16,7 +16,6 @@ ti,model = "cm-t35"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; }; diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index 169037e5ff53cd83da50cfb16e70edfcc2c7d6ed..134d3f27a8ec5ae1f4f68982da4047dfcff13e13 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -48,7 +48,6 @@ ti,model = "devkit8000"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; ti,audio-routing = "Ext Spk", "PREDRIVEL", "Ext Spk", "PREDRIVER", diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 127f3e7c10c4fcade6d95a201ffeccf4b66d9297..346552b94d9f7705a80642dc8ce86ea6bad800d6 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -106,6 +106,16 @@ non-removable; bus-width = <4>; cap-power-off-card; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 149 */ + ref-clock-frequency = <38400000>; + }; }; &twl_gpio { diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index fb3a69604ed5ccebff4f90257c76ddfaad58a555..b9f68817bd6e636d5f1e657a3916de26c3aafcba 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -46,7 +46,6 @@ ti,model = "gta04"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; spi_lcd { diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 8a63ad2286aa26eaadf6162a12a98e24437acf28..d5e5cd449b16757d269836609b16b35d34ecc039 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -22,7 +22,6 @@ compatible = "ti,omap-twl4030"; ti,model = "igep2"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; vdd33: regulator-vdd33 { diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index cc8bd0cd8cf83d47deaa18ea29cbe3a08675e19b..72f7cdc091fba03ca51b223ec4f49cc810be88f4 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -42,4 +42,13 @@ vmmc-supply = <&lbep5clwmc_wlen>; bus-width = <4>; non-removable; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; /* gpio 177 */ + }; }; diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index 9326b282c94ab92aadc681cf362cddf8a575e98f..b899e341874a3dc84e9e898748fea314be0b84e4 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -64,4 +64,13 @@ vmmc-supply = <&lbep5clwmc_wlen>; bus-width = <4>; non-removable; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */ + }; }; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index e81fb651d5d0f04a6a90a6abca434cd64dc5d21e..e63133304a341a3d7b2d3401003b351b2c821b32 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -38,7 +38,6 @@ ti,model = "lilly-a83x"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; reg_vcc3: vcc3 { diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index 9938b5dc1909c00f01e587f15a4a1c1d2a6bc665..f2e213931e09a21ed24f7e50b28a74d50eeca735 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -16,3 +16,40 @@ model = "Nokia N9"; compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3"; }; + +&i2c2 { + smia_1: camera@10 { + compatible = "nokia,smia"; + reg = <0x10>; + /* No reset gpio */ + vana-supply = <&vaux3>; + clocks = <&isp 0>; + clock-frequency = <9600000>; + nokia,nvm-size = <(16 * 64)>; + port { + smia_1_1: endpoint { + link-frequencies = /bits/ 64 <199200000 210000000 499200000>; + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&csi2a_ep>; + }; + }; + }; +}; + +&isp { + vdd-csiphy1-supply = <&vaux2>; + vdd-csiphy2-supply = <&vaux2>; + ports { + port@2 { + reg = <2>; + csi2a_ep: endpoint { + remote-endpoint = <&smia_1_1>; + clock-lanes = <2>; + data-lanes = <1 3>; + crc = <1>; + lane-polarities = <1 1 1>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index db80f9d376fadf569655fc9660526b16b0c10739..5c16145920eafd9604f0571dfe60a23986313871 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -9,9 +9,23 @@ /dts-v1/; -#include "omap34xx-hs.dtsi" +#include "omap34xx.dtsi" #include +/* + * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall + * for omap AES HW crypto support. When linux kernel try to access memory of AES + * blocks then kernel receive "Unhandled fault: external abort on non-linefetch" + * and crash. Until somebody fix omap-aes.c and omap_hwmod_3xxx_data.c code (no + * crash anymore) omap AES support will be disabled for all Nokia N900 devices. + * There is "unofficial" version of bootloader which enables AES in L3 firewall + * but it is not widely used and to prevent kernel crash rather AES is disabled. + * There is also no runtime detection code if AES is disabled in L3 firewall... + */ +&aes { + status = "disabled"; +}; + / { model = "Nokia N900"; compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3"; @@ -484,6 +498,8 @@ DRVDD-supply = <&vmmc2>; IOVDD-supply = <&vio>; DVDD-supply = <&vio>; + + ai3x-micbias-vg = <1>; }; tlv320aic3x_aux: tlv320aic3x@19 { @@ -495,6 +511,8 @@ DRVDD-supply = <&vmmc2>; IOVDD-supply = <&vio>; DVDD-supply = <&vio>; + + ai3x-micbias-vg = <2>; }; tsl2563: tsl2563@29 { @@ -609,6 +627,58 @@ pinctrl-0 = <&i2c3_pins>; clock-frequency = <400000>; + + lis302dl: lis3lv02d@1d { + compatible = "st,lis3lv02d"; + reg = <0x1d>; + + Vdd-supply = <&vaux1>; + Vdd_IO-supply = <&vio>; + + interrupt-parent = <&gpio6>; + interrupts = <21 20>; /* 181 and 180 */ + + /* click flags */ + st,click-single-x; + st,click-single-y; + st,click-single-z; + + /* Limits are 0.5g * value */ + st,click-threshold-x = <8>; + st,click-threshold-y = <8>; + st,click-threshold-z = <10>; + + /* Click must be longer than time limit */ + st,click-time-limit = <9>; + + /* Kind of debounce filter */ + st,click-latency = <50>; + + /* Interrupt line 2 for click detection */ + st,irq2-click; + + st,wakeup-x-hi; + st,wakeup-y-hi; + st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */ + + st,wakeup2-z-hi; + st,wakeup2-threshold = <(900/18)>; /* millig-value / 18 to get HW values */ + + st,hipass1-disable; + st,hipass2-disable; + + st,axis-x = <1>; /* LIS3_DEV_X */ + st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */ + st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */ + + st,min-limit-x = <(-32)>; + st,min-limit-y = <3>; + st,min-limit-z = <3>; + + st,max-limit-x = <(-3)>; + st,max-limit-y = <32>; + st,max-limit-z = <32>; + }; }; &mmc1 { diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index c41db94ee9c2749c34a99df9915f7da03ed7a020..800b379d368d54ca901fa25c1ab789287d6a30a0 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ -#include "omap36xx-hs.dtsi" +#include "omap36xx.dtsi" / { cpus { diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index 261c5589bfa3170e76cc8f469ac1d6ca07a02765..0885b34d5d7da252953c3aaef287a1e20b9dda63 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -16,3 +16,40 @@ model = "Nokia N950"; compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3"; }; + +&i2c2 { + smia_1: camera@10 { + compatible = "nokia,smia"; + reg = <0x10>; + /* No reset gpio */ + vana-supply = <&vaux3>; + clocks = <&isp 0>; + clock-frequency = <9600000>; + nokia,nvm-size = <(16 * 64)>; + port { + smia_1_1: endpoint { + link-frequencies = /bits/ 64 <210000000 333600000 398400000>; + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&csi2a_ep>; + }; + }; + }; +}; + +&isp { + vdd-csiphy1-supply = <&vaux2>; + vdd-csiphy2-supply = <&vaux2>; + ports { + port@2 { + reg = <2>; + csi2a_ep: endpoint { + remote-endpoint = <&smia_1_1>; + clock-lanes = <2>; + data-lanes = <3 1>; + crc = <1>; + lane-polarities = <1 1 1>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index d36bf0250a055427b595ee090b0cf56b6f03311b..18e1649681c1cdada8faf1673a8ac73c50bff288 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -27,7 +27,6 @@ ti,model = "overo"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; /* HS USB Port 2 Power */ diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts new file mode 100644 index 0000000000000000000000000000000000000000..9619a28dfd7d694dfb2b4dd425d7094ff043751d --- /dev/null +++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2015 + * Nikolaus Schaller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * device tree for OpenPandora 1GHz with DM3730 + */ + +/dts-v1/; + +#include "omap36xx.dtsi" +#include "omap3-pandora-common.dtsi" + +/ { + model = "Pandora Handheld Console 1GHz"; + + compatible = "ti,omap36xx", "ti,omap3"; +}; + +&omap3_pmx_core2 { + + pinctrl-names = "default"; + pinctrl-0 = < + &hsusb2_2_pins + &control_pins + >; + + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ + OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */ + OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */ + OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */ + OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */ + OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */ + >; + }; + + control_pins: pinmux_control_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* etk_d0.gpio_14 = HP_SHUTDOWN */ + OMAP3630_CORE2_IOPAD(0x25de, PIN_OUTPUT | MUX_MODE4) /* etk_d1.gpio_15 = BT_SHUTDOWN */ + OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 = RESET_USB_HOST */ + OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE4) /* etk_d7.gpio_21 = WIFI IRQ */ + OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 = MSECURE */ + OMAP3630_CORE2_IOPAD(0x25ee, PIN_OUTPUT | MUX_MODE4) /* etk_d9.gpio_23 = WIFI_POWER */ + OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT | MUX_MODE4) /* reserved.gpio_127 = MMC2_WP */ + OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4) /* reserved.gpio_126 = MMC1_WP */ + OMAP3_WKUP_IOPAD(0x2a58, PIN_OUTPUT | MUX_MODE4) /* reserved.gpio_128 = LED_MMC1 */ + OMAP3_WKUP_IOPAD(0x2a5a, PIN_OUTPUT | MUX_MODE4) /* reserved.gpio_129 = LED_MMC2 */ + + >; + }; +}; diff --git a/arch/arm/boot/dts/omap3-pandora-600mhz.dts b/arch/arm/boot/dts/omap3-pandora-600mhz.dts new file mode 100644 index 0000000000000000000000000000000000000000..fb803a70a2bbd1c81f6bf136119541a862609120 --- /dev/null +++ b/arch/arm/boot/dts/omap3-pandora-600mhz.dts @@ -0,0 +1,65 @@ +/* + * Copyright (C) 2015 + * Nikolaus Schaller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * device tree for OpenPandora with OMAP3530 + */ + +/dts-v1/; + +#include "omap34xx.dtsi" +#include "omap3-pandora-common.dtsi" + +/ { + model = "Pandora Handheld Console"; + + compatible = "ti,omap3"; +}; + +&omap3_pmx_core2 { + + pinctrl-names = "default"; + pinctrl-0 = < + &hsusb2_2_pins + &control_pins + >; + + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ + OMAP3430_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */ + OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */ + OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */ + OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */ + OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */ + >; + }; + + control_pins: pinmux_control_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* etk_d0.gpio_14 = HP_SHUTDOWN */ + OMAP3430_CORE2_IOPAD(0x25de, PIN_OUTPUT | MUX_MODE4) /* etk_d1.gpio_15 = BT_SHUTDOWN */ + OMAP3430_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 = RESET_USB_HOST */ + OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE4) /* etk_d7.gpio_21 = WIFI IRQ */ + OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 = MSECURE */ + OMAP3430_CORE2_IOPAD(0x25ee, PIN_OUTPUT | MUX_MODE4) /* etk_d9.gpio_23 = WIFI_POWER */ + >; + }; +}; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..782ab1ff1d089eeac52214c7b18f77eab412eb14 --- /dev/null +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -0,0 +1,640 @@ +/* + * Copyright (C) 2015 + * Nikolaus Schaller + * + * Common device tree include for OpenPandora devices. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + aliases { + display0 = &lcd; + }; + + tv: connector@1 { + compatible = "connector-analog-tv"; + label = "tv"; + + port { + tv_connector_in: endpoint { + remote-endpoint = <&venc_out>; + }; + }; + }; + + gpio-leds { + + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + led@1 { + label = "pandora::sd1"; + gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* GPIO_128 */ + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@2 { + label = "pandora::sd2"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* GPIO_129 */ + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led@3 { + label = "pandora::bluetooth"; + gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; /* GPIO_158 */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@4 { + label = "pandora::wifi"; + gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; /* GPIO_159 */ + linux,default-trigger = "mmc2"; + default-state = "off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&button_pins>; + + up-button { + label = "up"; + linux,code = ; + gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* GPIO_110 */ + gpio-key,wakeup; + }; + + down-button { + label = "down"; + linux,code = ; + gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* GPIO_103 */ + gpio-key,wakeup; + }; + + left-button { + label = "left"; + linux,code = ; + gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; /* GPIO_96 */ + gpio-key,wakeup; + }; + + right-button { + label = "right"; + linux,code = ; + gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; /* GPIO_98 */ + gpio-key,wakeup; + }; + + pageup-button { + label = "game 1"; + linux,code = ; + gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* GPIO_109 */ + gpio-key,wakeup; + }; + + pagedown-button { + label = "game 3"; + linux,code = ; + gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* GPIO_106 */ + gpio-key,wakeup; + }; + + home-button { + label = "game 4"; + linux,code = ; + gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* GPIO_101 */ + gpio-key,wakeup; + }; + + end-button { + label = "game 2"; + linux,code = ; + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* GPIO_111 */ + gpio-key,wakeup; + }; + + right-shift { + label = "l"; + linux,code = ; + gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* GPIO_102 */ + gpio-key,wakeup; + }; + + kp-plus { + label = "l2"; + linux,code = ; + gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; /* GPIO_97 */ + gpio-key,wakeup; + }; + + right-ctrl { + label = "r"; + linux,code = ; + gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* GPIO_105 */ + gpio-key,wakeup; + }; + + kp-minus { + label = "r2"; + linux,code = ; + gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* GPIO_107 */ + gpio-key,wakeup; + }; + + left-ctrl { + label = "ctrl"; + linux,code = ; + gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* GPIO_104 */ + gpio-key,wakeup; + }; + + menu { + label = "menu"; + linux,code = ; + gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; /* GPIO_99 */ + gpio-key,wakeup; + }; + + hold { + label = "hold"; + linux,code = ; + gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* GPIO_176 */ + gpio-key,wakeup; + }; + + left-alt { + label = "alt"; + linux,code = ; + gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; /* GPIO_100 */ + gpio-key,wakeup; + }; + + lid { + label = "lid"; + linux,code = <0x00>; /* SW_LID lid shut */ + linux,input-type = <0x05>; /* EV_SW */ + gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; /* GPIO_108 */ + }; + }; +}; + +&omap3_pmx_core { + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dirdat0 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dirdat1 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dircmd */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */ + >; + }; + + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* GPIO_157 = lcd reset */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + >; + }; + + led_pins: pinmux_leds_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2154, PIN_OUTPUT | MUX_MODE4) /* GPIO_128 */ + OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* GPIO_129 */ + OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE4) /* GPIO_158 */ + OMAP3_CORE1_IOPAD(0x2192, PIN_OUTPUT | MUX_MODE4) /* GPIO_159 */ + >; + }; + + button_pins: pinmux_button_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE4) /* GPIO_96 */ + OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE4) /* GPIO_97 */ + OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4) /* GPIO_98 */ + OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE4) /* GPIO_99 */ + OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE4) /* GPIO_100 */ + OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* GPIO_101 */ + OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4) /* GPIO_102 */ + OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4) /* GPIO_103 */ + OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4) /* GPIO_104 */ + OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4) /* GPIO_105 */ + OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4) /* GPIO_106 */ + OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4) /* GPIO_107 */ + OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4) /* GPIO_108 */ + OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4) /* GPIO_109 */ + OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT | MUX_MODE4) /* GPIO_110 */ + OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4) /* GPIO_111 */ + OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* GPIO_176 */ + >; + }; + + penirq_pins: pinmux_penirq_pins { + pinctrl-single,pins = < + /* here we could enable to wakeup the cpu from suspend by a pen touch */ + OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE4) /* GPIO_94 */ + >; + }; + +}; + +&omap3_pmx_core2 { + /* define in CPU specific file that includes this one + * use either OMAP3430_CORE2_IOPAD() or OMAP3630_CORE2_IOPAD() + */ +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + twl_power: power { + compatible = "ti,twl4030-power-reset"; + ti,use_poweroff; + }; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + + codec { + ti,ramp_delay_value = <3>; + }; + }; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&twl_keypad { + keypad,num-rows = <8>; + keypad,num-columns = <6>; + linux,keymap = < + MATRIX_KEY(0, 0, KEY_9) + MATRIX_KEY(0, 1, KEY_8) + MATRIX_KEY(0, 2, KEY_I) + MATRIX_KEY(0, 3, KEY_J) + MATRIX_KEY(0, 4, KEY_N) + MATRIX_KEY(0, 5, KEY_M) + MATRIX_KEY(1, 0, KEY_0) + MATRIX_KEY(1, 1, KEY_7) + MATRIX_KEY(1, 2, KEY_U) + MATRIX_KEY(1, 3, KEY_H) + MATRIX_KEY(1, 4, KEY_B) + MATRIX_KEY(1, 5, KEY_SPACE) + MATRIX_KEY(2, 0, KEY_BACKSPACE) + MATRIX_KEY(2, 1, KEY_6) + MATRIX_KEY(2, 2, KEY_Y) + MATRIX_KEY(2, 3, KEY_G) + MATRIX_KEY(2, 4, KEY_V) + MATRIX_KEY(2, 5, KEY_FN) + MATRIX_KEY(3, 0, KEY_O) + MATRIX_KEY(3, 1, KEY_5) + MATRIX_KEY(3, 2, KEY_T) + MATRIX_KEY(3, 3, KEY_F) + MATRIX_KEY(3, 4, KEY_C) + MATRIX_KEY(4, 0, KEY_P) + MATRIX_KEY(4, 1, KEY_4) + MATRIX_KEY(4, 2, KEY_R) + MATRIX_KEY(4, 3, KEY_D) + MATRIX_KEY(4, 4, KEY_X) + MATRIX_KEY(5, 0, KEY_K) + MATRIX_KEY(5, 1, KEY_3) + MATRIX_KEY(5, 2, KEY_E) + MATRIX_KEY(5, 3, KEY_S) + MATRIX_KEY(5, 4, KEY_Z) + MATRIX_KEY(6, 0, KEY_L) + MATRIX_KEY(6, 1, KEY_2) + MATRIX_KEY(6, 2, KEY_W) + MATRIX_KEY(6, 3, KEY_A) + MATRIX_KEY(6, 4, KEY_RIGHTBRACE) + MATRIX_KEY(7, 0, KEY_ENTER) + MATRIX_KEY(7, 1, KEY_1) + MATRIX_KEY(7, 2, KEY_Q) + MATRIX_KEY(7, 3, KEY_LEFTSHIFT) + MATRIX_KEY(7, 4, KEY_LEFTBRACE ) + >; +}; + +/* backup battery charger */ +&charger { + ti,bb-uvolt = <3200000>; + ti,bb-uamp = <150>; +}; + +/* MMC2 */ +&vmmc2 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <3150000>; +}; + +/* LCD */ +&vaux1 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; +}; + +/* USB Host PHY */ +&vaux2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +/* available on expansion connector */ +&vaux3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +/* ADS7846 and nubs */ +&vaux4 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +/* power audio DAC and LID sensor */ +&vsim { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; +}; + +&i2c2 { + clock-frequency = <100000>; + /* no clients so we should disable clock */ +}; + +&i2c3 { + clock-frequency = <100000>; + + bq27500@55 { + compatible = "ti,bq27500"; + reg = <0x55>; + }; + +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc1>; + bus-width = <4>; + cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; /* GPIO_126 */ +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&vmmc2>; + bus-width = <4>; + cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* GPIO_127 */ +}; + +/* bluetooth*/ +&uart1 { +}; + +/* spare (expansion connector) */ +&uart2 { +}; + +/* console (expansion connector) */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; +}; + +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&gpmc { + ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ + + nand@0,0 { + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + nand-bus-width = <16>; + ti,nand-ecc-opt = "sw"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,device-width = <2>; + + #address-cells = <1>; + #size-cells = <1>; + + /* u-boot uses mtdparts=nand:512k(xloader),1920k(uboot),128k(uboot-env),10m(boot),-(rootfs) */ + + x-loader@0 { + label = "xloader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "uboot"; + reg = <0x80000 0x1e0000>; + }; + + bootloaders_env@260000 { + label = "uboot-env"; + reg = <0x260000 0x20000>; + }; + + kernel@280000 { + label = "boot"; + reg = <0x280000 0xa00000>; + }; + + filesystem@680000 { + label = "rootfs"; + reg = <0xc80000 0>; /* 0 = MTDPART_SIZ_FULL */ + }; + }; +}; + +&mcspi1 { + tsc2046@0 { + reg = <0>; /* CS0 */ + compatible = "ti,tsc2046"; + spi-max-frequency = <1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&penirq_pins>; + interrupt-parent = <&gpio3>; + interrupts = <30 0>; /* GPIO_94 */ + pendown-gpio = <&gpio3 30 0>; + vcc-supply = <&vaux4>; + + ti,x-min = /bits/ 16 <0>; + ti,x-max = /bits/ 16 <8000>; + ti,y-min = /bits/ 16 <0>; + ti,y-max = /bits/ 16 <4800>; + ti,x-plate-ohms = /bits/ 16 <40>; + ti,pressure-max = /bits/ 16 <255>; + + linux,wakeup; + }; + + lcd: lcd@1 { + reg = <1>; /* CS1 */ + compatible = "omapdss,tpo,td043mtea1"; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + + label = "lcd"; + reset-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; /* GPIO_157 */ + vcc-supply = <&vaux1>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + + +}; + +/* n/a - used as GPIOs */ +&mcbsp1 { +}; + +/* audio DAC */ +&mcbsp2 { +}; + +/* bluetooth */ +&mcbsp3 { +}; + +/* to twl4030*/ +&mcbsp4 { +}; + +&venc { + status = "ok"; + + vdda-supply = <&vdac>; + + port { + venc_out: endpoint { + remote-endpoint = <&tv_connector_in>; + ti,channels = <2>; + }; + }; +}; + +&dss { + pinctrl-names = "default"; + pinctrl-0 = < &dss_dpi_pins >; + + status = "ok"; + vdds_dsi-supply = <&vpll2>; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index e89820a6776ef2d5628e85e681e1b998aadbfdce..7bd8d9a4f67fbaece7239df36f5c141126c62a50 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -8,7 +8,16 @@ */ /dts-v1/; -#include "omap34xx-hs.dtsi" +#include "omap34xx.dtsi" + +/* Secure omaps have some devices inaccessible depending on the firmware */ +&aes { + status = "disabled"; +}; + +&sham { + status = "disabled"; +}; / { cpus { @@ -45,7 +54,6 @@ /* McBSP2 is used for onboard sound, same as on beagle */ ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; /* Regulator to enable/switch the vcc of the Wifi module */ diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index 6644f516a42bd9de5f5fb52a707051ad502e18a8..131448d86e67bdd4bff337529d01a35e232c6326 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -195,6 +195,16 @@ cap-power-off-card; pinctrl-names = "default"; pinctrl-0 = <&mmc3_pins &mmc3_2_pins>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 162 */ + ref-clock-frequency = <26000000>; + }; }; &uart1 { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 3fdc84fddb70d06a2ae26db02fc2c9c9f6d8ee63..69a40cfc1f29dddbd515b4f821459442787d401a 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -87,6 +87,60 @@ ranges; ti,hwmods = "l3_main"; + l4_core: l4@48000000 { + compatible = "ti,omap3-l4-core", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48000000 0x1000000>; + + scm: scm@2000 { + compatible = "ti,omap3-scm", "simple-bus"; + reg = <0x2000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x2000>; + + omap3_pmx_core: pinmux@30 { + compatible = "ti,omap3-padconf", + "pinctrl-single"; + reg = <0x30 0x238>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xff1f>; + }; + + scm_conf: scm_conf@270 { + compatible = "syscon"; + reg = <0x270 0x330>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + scm_clockdomains: clockdomains { + }; + + omap3_pmx_wkup: pinmux@a00 { + compatible = "ti,omap3-padconf", + "pinctrl-single"; + reg = <0xa00 0x5c>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xff1f>; + }; + }; + }; + aes: aes@480c5000 { compatible = "ti,omap3-aes"; ti,hwmods = "aes"; @@ -123,19 +177,6 @@ }; }; - scrm: scrm@48002000 { - compatible = "ti,omap3-scrm"; - reg = <0x48002000 0x2000>; - - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - scrm_clockdomains: clockdomains { - }; - }; - counter32k: counter@48320000 { compatible = "ti,omap-counter32k"; reg = <0x48320000 0x20>; @@ -161,37 +202,10 @@ dma-requests = <96>; }; - omap3_pmx_core: pinmux@48002030 { - compatible = "ti,omap3-padconf", "pinctrl-single"; - reg = <0x48002030 0x0238>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xff1f>; - }; - - omap3_pmx_wkup: pinmux@48002a00 { - compatible = "ti,omap3-padconf", "pinctrl-single"; - reg = <0x48002a00 0x5c>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xff1f>; - }; - - omap3_scm_general: tisyscon@48002270 { - compatible = "syscon"; - reg = <0x48002270 0x2f0>; - }; - pbias_regulator: pbias_regulator { compatible = "ti,pbias-omap"; reg = <0x2b0 0x4>; - syscon = <&omap3_scm_general>; + syscon = <&scm_conf>; pbias_mmc_reg: pbias_mmc_omap2430 { regulator-name = "pbias_mmc_omap2430"; regulator-min-microvolt = <1800000>; @@ -442,6 +456,7 @@ }; mmu_isp: mmu@480bd400 { + #iommu-cells = <0>; compatible = "ti,omap2-iommu"; reg = <0x480bd400 0x80>; interrupts = <24>; @@ -450,6 +465,7 @@ }; mmu_iva: mmu@5d000000 { + #iommu-cells = <0>; compatible = "ti,omap2-iommu"; reg = <0x5d000000 0x80>; interrupts = <28>; diff --git a/arch/arm/boot/dts/omap34xx-hs.dtsi b/arch/arm/boot/dts/omap34xx-hs.dtsi deleted file mode 100644 index 1ff626489546cc570e8c6ad00207225ed1f81f41..0000000000000000000000000000000000000000 --- a/arch/arm/boot/dts/omap34xx-hs.dtsi +++ /dev/null @@ -1,16 +0,0 @@ -/* Disabled modules for secure omaps */ - -#include "omap34xx.dtsi" - -/* Secure omaps have some devices inaccessible depending on the firmware */ -&aes { - status = "disabled"; -}; - -&sham { - status = "disabled"; -}; - -&timer12 { - status = "disabled"; -}; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 3819c1e915915b2ad79395ce97323fbaa52ae439..4f6b2d5b1902e96114f12b1f8bd7d15ba0b9819e 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -8,6 +8,8 @@ * kind, whether express or implied. */ +#include + #include "omap3.dtsi" / { @@ -37,6 +39,21 @@ pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0xff1f>; }; + + isp: isp@480bc000 { + compatible = "ti,omap3-isp"; + reg = <0x480bc000 0x12fc + 0x480bd800 0x017c>; + interrupts = <24>; + iommus = <&mmu_isp>; + syscon = <&scm_conf 0xdc>; + ti,phy-type = ; + #clock-cells = <1>; + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/omap36xx-hs.dtsi b/arch/arm/boot/dts/omap36xx-hs.dtsi deleted file mode 100644 index 2c7febb0e016cbfea1375d23892d184d243b60de..0000000000000000000000000000000000000000 --- a/arch/arm/boot/dts/omap36xx-hs.dtsi +++ /dev/null @@ -1,16 +0,0 @@ -/* Disabled modules for secure omaps */ - -#include "omap36xx.dtsi" - -/* Secure omaps have some devices inaccessible depending on the firmware */ -&aes { - status = "disabled"; -}; - -&sham { - status = "disabled"; -}; - -&timer12 { - status = "disabled"; -}; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 541704a59a5adcac655c7a23ea49123c6a4fe9de..86253de5a97a99ddb12ea5f41c72f3c59279fced 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -8,6 +8,8 @@ * kind, whether express or implied. */ +#include + #include "omap3.dtsi" / { @@ -69,6 +71,21 @@ pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0xff1f>; }; + + isp: isp@480bc000 { + compatible = "ti,omap3-isp"; + reg = <0x480bc000 0x12fc + 0x480bd800 0x0600>; + interrupts = <24>; + iommus = <&mmu_isp>; + syscon = <&scm_conf 0x2f0>; + ti,phy-type = ; + #clock-cells = <1>; + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi index 5c375003bad106216109b5626264300433dabd1d..bbba5bdc4bc946d5cb9b179283c65f27ecdef1d9 100644 --- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi +++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi @@ -79,13 +79,14 @@ clock-div = <1>; }; }; -&scrm_clocks { + +&scm_clocks { mcbsp5_mux_fck: mcbsp5_mux_fck { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&core_96m_fck>, <&mcbsp_clks>; ti,bit-shift = <4>; - reg = <0x02d8>; + reg = <0x68>; }; mcbsp5_fck: mcbsp5_fck { @@ -99,7 +100,7 @@ compatible = "ti,composite-mux-clock"; clocks = <&core_96m_fck>, <&mcbsp_clks>; ti,bit-shift = <2>; - reg = <0x0274>; + reg = <0x04>; }; mcbsp1_fck: mcbsp1_fck { @@ -113,7 +114,7 @@ compatible = "ti,composite-mux-clock"; clocks = <&per_96m_fck>, <&mcbsp_clks>; ti,bit-shift = <6>; - reg = <0x0274>; + reg = <0x04>; }; mcbsp2_fck: mcbsp2_fck { @@ -126,7 +127,7 @@ #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&per_96m_fck>, <&mcbsp_clks>; - reg = <0x02d8>; + reg = <0x68>; }; mcbsp3_fck: mcbsp3_fck { @@ -140,7 +141,7 @@ compatible = "ti,composite-mux-clock"; clocks = <&per_96m_fck>, <&mcbsp_clks>; ti,bit-shift = <2>; - reg = <0x02d8>; + reg = <0x68>; }; mcbsp4_fck: mcbsp4_fck { diff --git a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi index cb9458feb2e36fe3c2ff95b1e857bd6ea5e52dbb..ab7f87ae96f099e5fbb53ee786602ea5492ba698 100644 --- a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi +++ b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi @@ -18,7 +18,7 @@ cpu_thermal: cpu_thermal { /* sensor ID */ thermal-sensors = <&bandgap 0>; - trips { + cpu_trips: trips { cpu_alert0: cpu_alert { temperature = <100000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ @@ -31,7 +31,7 @@ cpu_thermal: cpu_thermal { }; }; - cooling-maps { + cpu_cooling_maps: cooling-maps { map0 { trip = <&cpu_alert0>; cooling-device = diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 7c15fb2e2fe4098a7393bb7fa1239e37a4ebab3d..f1507bc8737ee61031d0166b915317c3bf16b238 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -448,6 +448,16 @@ non-removable; bus-width = <4>; cap-power-off-card; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio2>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */ + ref-clock-frequency = <38400000>; + }; }; &emif1 { diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 8aca8dae968ad276f193a3b3c969082a23dcc7e7..dac86ed7481f477ba315f67aef7dd7de17a67408 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -485,6 +485,17 @@ non-removable; bus-width = <4>; cap-power-off-card; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1281"; + reg = <2>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */ + ref-clock-frequency = <26000000>; + tcxo-clock-frequency = <26000000>; + }; }; &emif1 { diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi index cc66af4192366fda0a1110a1770b3722b7579b2f..9bceeb7e1f0315d91d7aa8fe77bed9fdf5652064 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi @@ -65,4 +65,14 @@ bus-width = <4>; cap-power-off-card; status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio2>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */ + ref-clock-frequency = <38400000>; + }; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index f2091d1c9c36c2995e08a4d63929df6c2679d243..f884d6adb71e8ed28371afd54c04528403ad29ba 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -124,99 +124,141 @@ interrupts = , ; - cm1: cm1@4a004000 { - compatible = "ti,omap4-cm1"; - reg = <0x4a004000 0x2000>; - - cm1_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + l4_cfg: l4@4a000000 { + compatible = "ti,omap4-l4-cfg", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a000000 0x1000000>; - cm1_clockdomains: clockdomains { - }; - }; + cm1: cm1@4000 { + compatible = "ti,omap4-cm1"; + reg = <0x4000 0x2000>; - prm: prm@4a306000 { - compatible = "ti,omap4-prm"; - reg = <0x4a306000 0x3000>; - interrupts = ; + cm1_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - prm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; + cm1_clockdomains: clockdomains { + }; }; - prm_clockdomains: clockdomains { - }; - }; + cm2: cm2@8000 { + compatible = "ti,omap4-cm2"; + reg = <0x8000 0x3000>; - cm2: cm2@4a008000 { - compatible = "ti,omap4-cm2"; - reg = <0x4a008000 0x3000>; + cm2_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - cm2_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; + cm2_clockdomains: clockdomains { + }; }; - cm2_clockdomains: clockdomains { + omap4_scm_core: scm@2000 { + compatible = "ti,omap4-scm-core", "simple-bus"; + reg = <0x2000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x1000>; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + }; }; - }; - - scrm: scrm@4a30a000 { - compatible = "ti,omap4-scrm"; - reg = <0x4a30a000 0x2000>; - scrm_clocks: clocks { + omap4_padconf_core: scm@100000 { + compatible = "ti,omap4-scm-padconf-core", + "simple-bus"; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; + ranges = <0 0x100000 0x1000>; + + omap4_pmx_core: pinmux@40 { + compatible = "ti,omap4-padconf", + "pinctrl-single"; + reg = <0x40 0x0196>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + + omap4_padconf_global: omap4_padconf_global@5a0 { + compatible = "syscon"; + reg = <0x5a0 0x170>; + #address-cells = <1>; + #size-cells = <1>; + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0x60 0x4>; + syscon = <&omap4_padconf_global>; + pbias_mmc_reg: pbias_mmc_omap4 { + regulator-name = "pbias_mmc_omap4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; }; - scrm_clockdomains: clockdomains { - }; - }; - - counter32k: counter@4a304000 { - compatible = "ti,omap-counter32k"; - reg = <0x4a304000 0x20>; - ti,hwmods = "counter_32k"; - }; - - omap4_pmx_core: pinmux@4a100040 { - compatible = "ti,omap4-padconf", "pinctrl-single"; - reg = <0x4a100040 0x0196>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - omap4_pmx_wkup: pinmux@4a31e040 { - compatible = "ti,omap4-padconf", "pinctrl-single"; - reg = <0x4a31e040 0x0038>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - - omap4_padconf_global: tisyscon@4a1005a0 { - compatible = "syscon"; - reg = <0x4a1005a0 0x170>; - }; - - pbias_regulator: pbias_regulator { - compatible = "ti,pbias-omap"; - reg = <0x60 0x4>; - syscon = <&omap4_padconf_global>; - pbias_mmc_reg: pbias_mmc_omap4 { - regulator-name = "pbias_mmc_omap4"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; + l4_wkup: l4@300000 { + compatible = "ti,omap4-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x300000 0x40000>; + + counter32k: counter@4000 { + compatible = "ti,omap-counter32k"; + reg = <0x4000 0x20>; + ti,hwmods = "counter_32k"; + }; + + prm: prm@6000 { + compatible = "ti,omap4-prm"; + reg = <0x6000 0x3000>; + interrupts = ; + + prm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prm_clockdomains: clockdomains { + }; + }; + + scrm: scrm@a000 { + compatible = "ti,omap4-scrm"; + reg = <0xa000 0x2000>; + + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scrm_clockdomains: clockdomains { + }; + }; + + omap4_pmx_wkup: pinmux@1e040 { + compatible = "ti,omap4-padconf", + "pinctrl-single"; + reg = <0x1e040 0x0038>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; }; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 77b5f70d0ebcc8279b1e8e3e45afbc92be2abc6a..7d24ae0306b56845c80c2c783dd818033a3a6cd1 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -128,7 +128,7 @@ * hierarchy. */ ocp { - compatible = "ti,omap4-l3-noc", "simple-bus"; + compatible = "ti,omap5-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -139,99 +139,141 @@ interrupts = , ; - prm: prm@4ae06000 { - compatible = "ti,omap5-prm"; - reg = <0x4ae06000 0x3000>; - interrupts = ; + l4_cfg: l4@4a000000 { + compatible = "ti,omap5-l4-cfg", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a000000 0x22a000>; - prm_clocks: clocks { + scm_core: scm@2000 { + compatible = "ti,omap5-scm-core", "simple-bus"; + reg = <0x2000 0x1000>; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; + ranges = <0 0x2000 0x800>; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + }; }; - prm_clockdomains: clockdomains { + scm_padconf_core: scm@2800 { + compatible = "ti,omap5-scm-padconf-core", + "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2800 0x800>; + + omap5_pmx_core: pinmux@40 { + compatible = "ti,omap5-padconf", + "pinctrl-single"; + reg = <0x40 0x01b6>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + + omap5_padconf_global: omap5_padconf_global@5a0 { + compatible = "syscon"; + reg = <0x5a0 0xec>; + #address-cells = <1>; + #size-cells = <1>; + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0x60 0x4>; + syscon = <&omap5_padconf_global>; + pbias_mmc_reg: pbias_mmc_omap5 { + regulator-name = "pbias_mmc_omap5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; }; - }; - cm_core_aon: cm_core_aon@4a004000 { - compatible = "ti,omap5-cm-core-aon"; - reg = <0x4a004000 0x2000>; + cm_core_aon: cm_core_aon@4000 { + compatible = "ti,omap5-cm-core-aon"; + reg = <0x4000 0x2000>; - cm_core_aon_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + cm_core_aon_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - cm_core_aon_clockdomains: clockdomains { + cm_core_aon_clockdomains: clockdomains { + }; }; - }; - scrm: scrm@4ae0a000 { - compatible = "ti,omap5-scrm"; - reg = <0x4ae0a000 0x2000>; + cm_core: cm_core@8000 { + compatible = "ti,omap5-cm-core"; + reg = <0x8000 0x3000>; - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + cm_core_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - scrm_clockdomains: clockdomains { + cm_core_clockdomains: clockdomains { + }; }; }; - cm_core: cm_core@4a008000 { - compatible = "ti,omap5-cm-core"; - reg = <0x4a008000 0x3000>; + l4_wkup: l4@4ae00000 { + compatible = "ti,omap5-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4ae00000 0x2b000>; - cm_core_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; + counter32k: counter@4000 { + compatible = "ti,omap-counter32k"; + reg = <0x4000 0x40>; + ti,hwmods = "counter_32k"; }; - cm_core_clockdomains: clockdomains { + prm: prm@6000 { + compatible = "ti,omap5-prm"; + reg = <0x6000 0x3000>; + interrupts = ; + + prm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prm_clockdomains: clockdomains { + }; }; - }; - counter32k: counter@4ae04000 { - compatible = "ti,omap-counter32k"; - reg = <0x4ae04000 0x40>; - ti,hwmods = "counter_32k"; - }; + scrm: scrm@a000 { + compatible = "ti,omap5-scrm"; + reg = <0xa000 0x2000>; - omap5_pmx_core: pinmux@4a002840 { - compatible = "ti,omap5-padconf", "pinctrl-single"; - reg = <0x4a002840 0x01b6>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - omap5_pmx_wkup: pinmux@4ae0c840 { - compatible = "ti,omap5-padconf", "pinctrl-single"; - reg = <0x4ae0c840 0x0038>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - omap5_padconf_global: tisyscon@4a002da0 { - compatible = "syscon"; - reg = <0x4A002da0 0xec>; - }; + scrm_clockdomains: clockdomains { + }; + }; - pbias_regulator: pbias_regulator { - compatible = "ti,pbias-omap"; - reg = <0x60 0x4>; - syscon = <&omap5_padconf_global>; - pbias_mmc_reg: pbias_mmc_omap5 { - regulator-name = "pbias_mmc_omap5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; + omap5_pmx_wkup: pinmux@c840 { + compatible = "ti,omap5-padconf", + "pinctrl-single"; + reg = <0xc840 0x0038>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index b3154c0716525a77f41c602d219f2360bb0ab1f5..6c1511263a55deacd582b96bd4c57edad59300a8 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -23,6 +23,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; + cpu-idle-states = <&CPU_SPC>; }; cpu@1 { @@ -33,6 +34,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; + cpu-idle-states = <&CPU_SPC>; }; cpu@2 { @@ -43,6 +45,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc2>; qcom,saw = <&saw2>; + cpu-idle-states = <&CPU_SPC>; }; cpu@3 { @@ -53,12 +56,23 @@ next-level-cache = <&L2>; qcom,acc = <&acc3>; qcom,saw = <&saw3>; + cpu-idle-states = <&CPU_SPC>; }; L2: l2-cache { compatible = "cache"; cache-level = <2>; }; + + idle-states { + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", + "arm,idle-state"; + entry-latency-us = <400>; + exit-latency-us = <900>; + min-residency-us = <3000>; + }; + }; }; cpu-pmu { @@ -139,26 +153,26 @@ reg = <0x020b8000 0x1000>, <0x02008000 0x1000>; }; - saw0: regulator@2089000 { - compatible = "qcom,saw2"; + saw0: power-controller@2089000 { + compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2"; reg = <0x02089000 0x1000>, <0x02009000 0x1000>; regulator; }; - saw1: regulator@2099000 { - compatible = "qcom,saw2"; + saw1: power-controller@2099000 { + compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2"; reg = <0x02099000 0x1000>, <0x02009000 0x1000>; regulator; }; - saw2: regulator@20a9000 { - compatible = "qcom,saw2"; + saw2: power-controller@20a9000 { + compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2"; reg = <0x020a9000 0x1000>, <0x02009000 0x1000>; regulator; }; - saw3: regulator@20b9000 { - compatible = "qcom,saw2"; + saw3: power-controller@20b9000 { + compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2"; reg = <0x020b9000 0x1000>, <0x02009000 0x1000>; regulator; }; @@ -166,6 +180,7 @@ gsbi1: gsbi@12440000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; + cell-index = <1>; reg = <0x12440000 0x100>; clocks = <&gcc GSBI1_H_CLK>; clock-names = "iface"; @@ -173,6 +188,8 @@ #size-cells = <1>; ranges; + syscon-tcsr = <&tcsr>; + i2c1: i2c@12460000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x12460000 0x1000>; @@ -187,6 +204,7 @@ gsbi2: gsbi@12480000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; + cell-index = <2>; reg = <0x12480000 0x100>; clocks = <&gcc GSBI2_H_CLK>; clock-names = "iface"; @@ -194,6 +212,8 @@ #size-cells = <1>; ranges; + syscon-tcsr = <&tcsr>; + i2c2: i2c@124a0000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x124a0000 0x1000>; @@ -208,6 +228,7 @@ gsbi7: gsbi@16600000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; + cell-index = <7>; reg = <0x16600000 0x100>; clocks = <&gcc GSBI7_H_CLK>; clock-names = "iface"; @@ -215,6 +236,8 @@ #size-cells = <1>; ranges; + syscon-tcsr = <&tcsr>; + serial@16640000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16640000 0x1000>, @@ -239,6 +262,13 @@ #reset-cells = <1>; }; + lcc: clock-controller@28000000 { + compatible = "qcom,lcc-apq8064"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + mmcc: clock-controller@4000000 { compatible = "qcom,mmcc-apq8064"; reg = <0x4000000 0x1000>; @@ -349,5 +379,10 @@ pinctrl-0 = <&sdc4_gpios>; }; }; + + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-apq8064", "syscon"; + reg = <0x1a400000 0x100>; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index 47370494d0f84ecf2cec66f4cd9ca22beb4f1269..d484d08163e9415557e17d05e34c567c7e2d9de1 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -1,4 +1,6 @@ #include "qcom-msm8974.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" / { model = "Qualcomm APQ8074 Dragonboard"; diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts index c9ff10821ad992b6f4df866fb9974f11e4a68993..f7725b96612c65475fec7f67445f4afb54c19e81 100644 --- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts +++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts @@ -1,4 +1,5 @@ #include "qcom-apq8084.dtsi" +#include "qcom-pma8084.dtsi" / { model = "Qualcomm APQ8084/IFC6540"; diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts index 8ecec58a9ff6bcc62139f17a99239925c5dbb924..cb43acfc5d1d9d0773243d42874d5bd1f5243e4f 100644 --- a/arch/arm/boot/dts/qcom-apq8084-mtp.dts +++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts @@ -1,4 +1,5 @@ #include "qcom-apq8084.dtsi" +#include "qcom-pma8084.dtsi" / { model = "Qualcomm APQ 8084-MTP"; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 1f130bc16858d4d1b2bbfbbca031cb49755b067a..7084010ee61ba463024a9e4ba5d48caf327e3c05 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -21,6 +21,8 @@ enable-method = "qcom,kpss-acc-v2"; next-level-cache = <&L2>; qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + cpu-idle-states = <&CPU_SPC>; }; cpu@1 { @@ -30,6 +32,8 @@ enable-method = "qcom,kpss-acc-v2"; next-level-cache = <&L2>; qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + cpu-idle-states = <&CPU_SPC>; }; cpu@2 { @@ -39,6 +43,8 @@ enable-method = "qcom,kpss-acc-v2"; next-level-cache = <&L2>; qcom,acc = <&acc2>; + qcom,saw = <&saw2>; + cpu-idle-states = <&CPU_SPC>; }; cpu@3 { @@ -48,6 +54,8 @@ enable-method = "qcom,kpss-acc-v2"; next-level-cache = <&L2>; qcom,acc = <&acc3>; + qcom,saw = <&saw3>; + cpu-idle-states = <&CPU_SPC>; }; L2: l2-cache { @@ -55,6 +63,16 @@ cache-level = <2>; qcom,saw = <&saw_l2>; }; + + idle-states { + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", + "arm,idle-state"; + entry-latency-us = <150>; + exit-latency-us = <200>; + min-residency-us = <2000>; + }; + }; }; cpu-pmu { @@ -144,7 +162,27 @@ }; }; - saw_l2: regulator@f9012000 { + saw0: power-controller@f9089000 { + compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>; + }; + + saw1: power-controller@f9099000 { + compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>; + }; + + saw2: power-controller@f90a9000 { + compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>; + }; + + saw3: power-controller@f90b9000 { + compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>; + }; + + saw_l2: power-controller@f9012000 { compatible = "qcom,saw2"; reg = <0xf9012000 0x1000>; regulator; @@ -226,5 +264,21 @@ clock-names = "core", "iface"; status = "disabled"; }; + + spmi_bus: spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + interrupt-names = "periph_irq"; + interrupts = <0 190 0>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index cb225dafe97cd83c9ae4cc19482ed55d4a71b8b3..9f727d8eadf6998561e748e0400e46299417f9b3 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -2,6 +2,7 @@ #include "skeleton.dtsi" #include +#include #include / { @@ -60,12 +61,35 @@ }; }; + clocks { + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; ranges; compatible = "simple-bus"; + lpass@28100000 { + compatible = "qcom,lpass-cpu"; + status = "disabled"; + clocks = <&lcc AHBIX_CLK>, + <&lcc MI2S_OSR_CLK>, + <&lcc MI2S_BIT_CLK>; + clock-names = "ahbix-clk", + "mi2s-osr-clk", + "mi2s-bit-clk"; + interrupts = <0 85 1>; + interrupt-names = "lpass-irq-lpaif"; + reg = <0x28100000 0x10000>; + reg-names = "lpass-lpaif"; + }; + qcom_pinmux: pinmux@800000 { compatible = "qcom,ipq8064-pinctrl"; reg = <0x800000 0x4000>; @@ -89,10 +113,14 @@ compatible = "qcom,kpss-timer", "qcom,msm-timer"; interrupts = <1 1 0x301>, <1 2 0x301>, - <1 3 0x301>; + <1 3 0x301>, + <1 4 0x301>, + <1 5 0x301>; reg = <0x0200a000 0x100>; clock-frequency = <25000000>, <32768>; + clocks = <&sleep_clk>; + clock-names = "sleep"; cpu-offset = <0x80000>; }; @@ -120,6 +148,7 @@ gsbi2: gsbi@12480000 { compatible = "qcom,gsbi-v1.0.0"; + cell-index = <2>; reg = <0x12480000 0x100>; clocks = <&gcc GSBI2_H_CLK>; clock-names = "iface"; @@ -128,6 +157,8 @@ ranges; status = "disabled"; + syscon-tcsr = <&tcsr>; + serial@12490000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x12490000 0x1000>, @@ -155,6 +186,7 @@ gsbi4: gsbi@16300000 { compatible = "qcom,gsbi-v1.0.0"; + cell-index = <4>; reg = <0x16300000 0x100>; clocks = <&gcc GSBI4_H_CLK>; clock-names = "iface"; @@ -163,6 +195,8 @@ ranges; status = "disabled"; + syscon-tcsr = <&tcsr>; + serial@16340000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16340000 0x1000>, @@ -189,6 +223,7 @@ gsbi5: gsbi@1a200000 { compatible = "qcom,gsbi-v1.0.0"; + cell-index = <5>; reg = <0x1a200000 0x100>; clocks = <&gcc GSBI5_H_CLK>; clock-names = "iface"; @@ -197,6 +232,8 @@ ranges; status = "disabled"; + syscon-tcsr = <&tcsr>; + serial@1a240000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x1a240000 0x1000>, @@ -279,5 +316,18 @@ #clock-cells = <1>; #reset-cells = <1>; }; + + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-ipq8064", "syscon"; + reg = <0x1a400000 0x100>; + }; + + lcc: clock-controller@28000000 { + compatible = "qcom,lcc-ipq8064"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 0affd6193f56c987c5a2806f40705fbddb92cab2..20bbd19b996ecfc4b883e770f0800dbb4f288215 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -82,6 +82,7 @@ gsbi12: gsbi@19c00000 { compatible = "qcom,gsbi-v1.0.0"; + cell-index = <12>; reg = <0x19c00000 0x100>; clocks = <&gcc GSBI12_H_CLK>; clock-names = "iface"; @@ -89,6 +90,8 @@ #size-cells = <1>; ranges; + syscon-tcsr = <&tcsr>; + serial@19c40000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x19c40000 0x1000>, @@ -196,6 +199,11 @@ vmmc-supply = <&vsdcc_fixed>; }; }; + + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-msm8660", "syscon"; + reg = <0x1a400000 0x100>; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index e1b0d5cd9e3cb7860363169a4f58efc158d05ced..a02b984cc68d8e2704abcb175e54c061ed54f629 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -91,6 +91,13 @@ reg = <0x900000 0x4000>; }; + lcc: clock-controller@28000000 { + compatible = "qcom,lcc-msm8960"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + clock-controller@4000000 { compatible = "qcom,mmcc-msm8960"; reg = <0x4000000 0x1000>; @@ -122,6 +129,7 @@ gsbi5: gsbi@16400000 { compatible = "qcom,gsbi-v1.0.0"; + cell-index = <5>; reg = <0x16400000 0x100>; clocks = <&gcc GSBI5_H_CLK>; clock-names = "iface"; @@ -129,6 +137,8 @@ #size-cells = <1>; ranges; + syscon-tcsr = <&tcsr>; + serial@16440000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16440000 0x1000>, @@ -238,5 +248,10 @@ vmmc-supply = <&vsdcc_fixed>; }; }; + + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-msm8960", "syscon"; + reg = <0x1a400000 0x100>; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index cccc21b7c8fde929c3c118dde9c46be740179609..bd35b0674ff6894cd6518046d049b385e038a624 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -1,4 +1,6 @@ #include "qcom-msm8974.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" / { model = "Sony Xperia Z1"; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index e265ec16a7879b013639821e2a7b2db56aa57989..37b47b5538b816bb51c251c521d58d18b7bbd806 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -21,6 +21,8 @@ reg = <0>; next-level-cache = <&L2>; qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + cpu-idle-states = <&CPU_SPC>; }; cpu@1 { @@ -30,6 +32,8 @@ reg = <1>; next-level-cache = <&L2>; qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + cpu-idle-states = <&CPU_SPC>; }; cpu@2 { @@ -39,6 +43,8 @@ reg = <2>; next-level-cache = <&L2>; qcom,acc = <&acc2>; + qcom,saw = <&saw2>; + cpu-idle-states = <&CPU_SPC>; }; cpu@3 { @@ -48,6 +54,8 @@ reg = <3>; next-level-cache = <&L2>; qcom,acc = <&acc3>; + qcom,saw = <&saw3>; + cpu-idle-states = <&CPU_SPC>; }; L2: l2-cache { @@ -55,6 +63,16 @@ cache-level = <2>; qcom,saw = <&saw_l2>; }; + + idle-states { + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", + "arm,idle-state"; + entry-latency-us = <150>; + exit-latency-us = <200>; + min-residency-us = <2000>; + }; + }; }; cpu-pmu { @@ -144,7 +162,27 @@ }; }; - saw_l2: regulator@f9012000 { + saw0: power-controller@f9089000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>; + }; + + saw1: power-controller@f9099000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>; + }; + + saw2: power-controller@f90a9000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>; + }; + + saw3: power-controller@f90b9000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>; + }; + + saw_l2: power-controller@f9012000 { compatible = "qcom,saw2"; reg = <0xf9012000 0x1000>; regulator; @@ -247,5 +285,21 @@ #address-cells = <1>; #size-cells = <0>; }; + + spmi_bus: spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + interrupt-names = "periph_irq"; + interrupts = <0 190 0>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..73813cc118f9e968dce4b20e9f2c385764439b80 --- /dev/null +++ b/arch/arm/boot/dts/qcom-pm8841.dtsi @@ -0,0 +1,18 @@ +#include + +&spmi_bus { + + usid4: pm8841@4 { + compatible = "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; + + usid5: pm8841@5 { + compatible = "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..24c5088acea2a244f79ae5b4edf537c07b8e22e3 --- /dev/null +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -0,0 +1,18 @@ +#include + +&spmi_bus { + + usid0: pm8941@0 { + compatible ="qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; + + usid1: pm8941@1 { + compatible ="qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..a5a4fe695a46afb08f054e9fd44044bfd4fb3285 --- /dev/null +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi @@ -0,0 +1,18 @@ +#include + +&spmi_bus { + + usid0: pma8084@0 { + compatible = "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; + + usid1: pma8084@1 { + compatible = "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts deleted file mode 100644 index b3d8f844b57a8fc2713ef2ba678c316fc970137b..0000000000000000000000000000000000000000 --- a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts +++ /dev/null @@ -1,156 +0,0 @@ -/* - * Device Tree Source for the APE6EVM board - * - * Copyright (C) 2013 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -#include "r8a73a4.dtsi" -#include - -/ { - model = "APE6EVM"; - compatible = "renesas,ape6evm-reference", "renesas,r8a73a4"; - - aliases { - serial0 = &scifa0; - }; - - chosen { - bootargs = "ignore_loglevel rw"; - stdout-path = &scifa0; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0 0x40000000 0 0x40000000>; - }; - - memory@200000000 { - device_type = "memory"; - reg = <2 0x00000000 0 0x40000000>; - }; - - vcc_mmc0: regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "MMC0 Vcc"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - vcc_sdhi0: regulator@1 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI0 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&pfc 76 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - /* Common 3.3V rail, used by several devices on APE6EVM */ - ape6evm_fixed_3v3: regulator@2 { - compatible = "regulator-fixed"; - regulator-name = "3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - lbsc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0x20000000>; - }; -}; - -&i2c5 { - status = "okay"; - vdd_dvfs: max8973@1b { - compatible = "maxim,max8973"; - reg = <0x1b>; - - regulator-min-microvolt = <935000>; - regulator-max-microvolt = <1200000>; - regulator-boot-on; - regulator-always-on; - }; -}; - -&cpu0 { - cpu0-supply = <&vdd_dvfs>; - operating-points = < - /* kHz uV */ - 1950000 1115000 - 1462500 995000 - >; - voltage-tolerance = <1>; /* 1% */ -}; - -&cmt1 { - status = "okay"; -}; - -&pfc { - scifa0_pins: serial0 { - renesas,groups = "scifa0_data"; - renesas,function = "scifa0"; - }; - - mmc0_pins: mmc { - renesas,groups = "mmc0_data8", "mmc0_ctrl"; - renesas,function = "mmc0"; - }; - - sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; - renesas,function = "sdhi0"; - }; - - sdhi1_pins: sd1 { - renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; - renesas,function = "sdhi1"; - }; -}; - -&mmcif0 { - vmmc-supply = <&vcc_mmc0>; - bus-width = <8>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - status = "okay"; -}; - -&scifa0 { - pinctrl-0 = <&scifa0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&sdhi0 { - vmmc-supply = <&vcc_sdhi0>; - bus-width = <4>; - toshiba,mmc-wrprotect-disable; - pinctrl-names = "default"; - pinctrl-0 = <&sdhi0_pins>; - status = "okay"; -}; - -&sdhi1 { - vmmc-supply = <&ape6evm_fixed_3v3>; - bus-width = <4>; - broken-cd; - toshiba,mmc-wrprotect-disable; - pinctrl-names = "default"; - pinctrl-0 = <&sdhi1_pins>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index 0d50bef0123449f5763a3fbd0f38956ae8508d74..81a38ceee098087ecd05ab13fa5e700783648e29 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -22,7 +22,7 @@ }; chosen { - bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw"; + bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw"; stdout-path = &scifa0; }; @@ -72,50 +72,30 @@ regulator-always-on; }; - lbsc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0x20000000>; - - ethernet@8000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0x08000000 0x1000>; - interrupt-parent = <&irqc1>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; - phy-mode = "mii"; - reg-io-width = <4>; - smsc,irq-active-high; - smsc,irq-push-pull; - vdd33a-supply = <&ape6evm_fixed_3v3>; - vddvario-supply = <&ape6evm_fixed_1v8>; - }; - }; - leds { compatible = "gpio-leds"; led1 { - gpios = <&pfc 28 GPIO_ACTIVE_LOW>; + gpios = <&pfc 28 GPIO_ACTIVE_HIGH>; label = "GNSS_EN"; }; led2 { - gpios = <&pfc 126 GPIO_ACTIVE_LOW>; + gpios = <&pfc 126 GPIO_ACTIVE_HIGH>; label = "NFC_NRST"; }; led3 { - gpios = <&pfc 132 GPIO_ACTIVE_LOW>; + gpios = <&pfc 132 GPIO_ACTIVE_HIGH>; label = "GNSS_NRST"; }; led4 { - gpios = <&pfc 232 GPIO_ACTIVE_LOW>; + gpios = <&pfc 232 GPIO_ACTIVE_HIGH>; label = "BT_WAKEUP"; }; led5 { - gpios = <&pfc 250 GPIO_ACTIVE_LOW>; + gpios = <&pfc 250 GPIO_ACTIVE_HIGH>; label = "STROBE"; }; led6 { - gpios = <&pfc 288 GPIO_ACTIVE_LOW>; + gpios = <&pfc 288 GPIO_ACTIVE_HIGH>; label = "BBRESETOUT"; }; }; @@ -123,10 +103,14 @@ keyboard { compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&keyboard_pins>; + zero-key { gpios = <&pfc 324 GPIO_ACTIVE_LOW>; linux,code = ; label = "S16"; + gpio-key,wakeup; }; menu-key { @@ -184,6 +168,21 @@ voltage-tolerance = <1>; /* 1% */ }; +&bsc { + ethernet@8000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x08000000 0x1000>; + interrupt-parent = <&irqc1>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vdd33a-supply = <&ape6evm_fixed_3v3>; + vddvario-supply = <&ape6evm_fixed_1v8>; + }; +}; + &cmt1 { status = "okay"; }; @@ -208,6 +207,12 @@ renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; renesas,function = "sdhi1"; }; + + keyboard_pins: keyboard { + renesas,pins = "PORT324", "PORT325", "PORT326", "PORT327", + "PORT328", "PORT329"; + bias-pull-up; + }; }; &mmcif0 { diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 38136d9f6d95a16ea0bb08f846ba4522a4d469aa..0fd889f88109de173c8760d7a7412ec0bc758b1d 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -9,6 +9,7 @@ * kind, whether express or implied. */ +#include #include #include @@ -27,9 +28,15 @@ compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1500000000>; + power-domains = <&pd_a2sl>; }; }; + ptm { + compatible = "arm,coresight-etm3x"; + power-domains = <&pd_d4>; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -41,11 +48,13 @@ dbsc1: memory-controller@e6790000 { compatible = "renesas,dbsc-r8a73a4"; reg = <0 0xe6790000 0 0x10000>; + power-domains = <&pd_a3bc>; }; dbsc2: memory-controller@e67a0000 { compatible = "renesas,dbsc-r8a73a4"; reg = <0 0xe67a0000 0 0x10000>; + power-domains = <&pd_a3bc>; }; dmac: dma-multiplexer { @@ -87,38 +96,19 @@ "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14", "ch15", "ch16", "ch17", "ch18", "ch19"; + clocks = <&mstp2_clks R8A73A4_CLK_DMAC>; + power-domains = <&pd_a3sp>; }; }; - pfc: pfc@e6050000 { - compatible = "renesas,pfc-r8a73a4"; - reg = <0 0xe6050000 0 0x9000>; - gpio-controller; - #gpio-cells = <2>; - interrupts-extended = - <&irqc0 0 0>, <&irqc0 1 0>, <&irqc0 2 0>, <&irqc0 3 0>, - <&irqc0 4 0>, <&irqc0 5 0>, <&irqc0 6 0>, <&irqc0 7 0>, - <&irqc0 8 0>, <&irqc0 9 0>, <&irqc0 10 0>, <&irqc0 11 0>, - <&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>, - <&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>, - <&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>, - <&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>, - <&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>, - <&irqc1 0 0>, <&irqc1 1 0>, <&irqc1 2 0>, <&irqc1 3 0>, - <&irqc1 4 0>, <&irqc1 5 0>, <&irqc1 6 0>, <&irqc1 7 0>, - <&irqc1 8 0>, <&irqc1 9 0>, <&irqc1 10 0>, <&irqc1 11 0>, - <&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>, - <&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>, - <&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>, - <&irqc1 24 0>, <&irqc1 25 0>; - }; - i2c5: i2c@e60b0000 { #address-cells = <1>; #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x428>; interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A73A4_CLK_IIC5>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -127,6 +117,9 @@ compatible = "renesas,cmt-48-r8a73a4", "renesas,cmt-48-gen2"; reg = <0 0xe6130000 0 0x1004>; interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A73A4_CLK_CMT1>; + clock-names = "fck"; + power-domains = <&pd_c5>; renesas,channels-mask = <0xff>; @@ -170,6 +163,7 @@ <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>, <0 31 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_c4>; }; irqc1: interrupt-controller@e61c0200 { @@ -203,6 +197,31 @@ <0 55 IRQ_TYPE_LEVEL_HIGH>, <0 56 IRQ_TYPE_LEVEL_HIGH>, <0 57 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_c4>; + }; + + pfc: pfc@e6050000 { + compatible = "renesas,pfc-r8a73a4"; + reg = <0 0xe6050000 0 0x9000>; + gpio-controller; + #gpio-cells = <2>; + interrupts-extended = + <&irqc0 0 0>, <&irqc0 1 0>, <&irqc0 2 0>, <&irqc0 3 0>, + <&irqc0 4 0>, <&irqc0 5 0>, <&irqc0 6 0>, <&irqc0 7 0>, + <&irqc0 8 0>, <&irqc0 9 0>, <&irqc0 10 0>, <&irqc0 11 0>, + <&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>, + <&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>, + <&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>, + <&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>, + <&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>, + <&irqc1 0 0>, <&irqc1 1 0>, <&irqc1 2 0>, <&irqc1 3 0>, + <&irqc1 4 0>, <&irqc1 5 0>, <&irqc1 6 0>, <&irqc1 7 0>, + <&irqc1 8 0>, <&irqc1 9 0>, <&irqc1 10 0>, <&irqc1 11 0>, + <&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>, + <&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>, + <&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>, + <&irqc1 24 0>, <&irqc1 25 0>; + power-domains = <&pd_c5>; }; thermal@e61f0000 { @@ -210,6 +229,8 @@ reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>; interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>; + power-domains = <&pd_c5>; }; i2c0: i2c@e6500000 { @@ -218,6 +239,8 @@ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x428>; interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A73A4_CLK_IIC0>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -227,6 +250,8 @@ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x428>; interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A73A4_CLK_IIC1>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -236,6 +261,8 @@ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6520000 0 0x428>; interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A73A4_CLK_IIC2>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -245,6 +272,8 @@ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6530000 0 0x428>; interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A73A4_CLK_IIC3>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -254,6 +283,8 @@ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6540000 0 0x428>; interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A73A4_CLK_IIC4>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -263,6 +294,8 @@ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6550000 0 0x428>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A73A4_CLK_IIC6>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -272,6 +305,8 @@ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6560000 0 0x428>; interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A73A4_CLK_IIC7>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -281,6 +316,8 @@ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6570000 0 0x428>; interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp5_clks R8A73A4_CLK_IIC8>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -288,6 +325,9 @@ compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6c20000 0 0x100>; interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A73A4_CLK_SCIFB0>; + clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -295,6 +335,9 @@ compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6c30000 0 0x100>; interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A73A4_CLK_SCIFB1>; + clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -302,6 +345,9 @@ compatible = "renesas,scifa-r8a73a4", "renesas,scifa"; reg = <0 0xe6c40000 0 0x100>; interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A73A4_CLK_SCIFA0>; + clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -309,6 +355,9 @@ compatible = "renesas,scifa-r8a73a4", "renesas,scifa"; reg = <0 0xe6c50000 0 0x100>; interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A73A4_CLK_SCIFA1>; + clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -316,6 +365,9 @@ compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6ce0000 0 0x100>; interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A73A4_CLK_SCIFB2>; + clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -323,6 +375,9 @@ compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6cf0000 0 0x100>; interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A73A4_CLK_SCIFB3>; + clock-names = "sci_ick"; + power-domains = <&pd_c4>; status = "disabled"; }; @@ -330,6 +385,8 @@ compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee100000 0 0x100>; interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A73A4_CLK_SDHI0>; + power-domains = <&pd_a3sp>; cap-sd-highspeed; status = "disabled"; }; @@ -338,6 +395,8 @@ compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee120000 0 0x100>; interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A73A4_CLK_SDHI1>; + power-domains = <&pd_a3sp>; cap-sd-highspeed; status = "disabled"; }; @@ -346,6 +405,8 @@ compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee140000 0 0x100>; interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A73A4_CLK_SDHI2>; + power-domains = <&pd_a3sp>; cap-sd-highspeed; status = "disabled"; }; @@ -354,6 +415,8 @@ compatible = "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A73A4_CLK_MMCIF0>; + power-domains = <&pd_a3sp>; reg-io-width = <4>; status = "disabled"; }; @@ -362,6 +425,8 @@ compatible = "renesas,sh-mmcif"; reg = <0 0xee220000 0 0x80>; interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A73A4_CLK_MMCIF1>; + power-domains = <&pd_a3sp>; reg-io-width = <4>; status = "disabled"; }; @@ -377,4 +442,450 @@ <0 0xf1006000 0 0x2000>; interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + + bsc: bus@fec10000 { + compatible = "renesas,bsc-r8a73a4", "renesas,bsc", + "simple-pm-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; + reg = <0 0xfec10000 0 0x400>; + clocks = <&zb_clk>; + power-domains = <&pd_c4>; + }; + + clocks { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* External root clocks */ + extalr_clk: extalr_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "extalr"; + }; + extal1_clk: extal1_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "extal1"; + }; + extal2_clk: extal2_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + clock-output-names = "extal2"; + }; + fsiack_clk: fsiack_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + clock-output-names = "fsiack"; + }; + fsibck_clk: fsibck_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + clock-output-names = "fsibck"; + }; + + /* Special CPG clocks */ + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a73a4-cpg-clocks"; + reg = <0 0xe6150000 0 0x10000>; + clocks = <&extal1_clk>, <&extal2_clk>; + #clock-cells = <1>; + clock-output-names = "main", "pll0", "pll1", "pll2", + "pll2s", "pll2h", "z", "z2", + "i", "m3", "b", "m1", "m2", + "zx", "zs", "hp"; + }; + + /* Variable factor clocks (DIV6) */ + zb_clk: zb_clk@e6150010 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150010 0 4>; + clocks = <&pll1_div2_clk>, <0>, + <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>; + #clock-cells = <0>; + clock-output-names = "zb"; + }; + sdhi0_clk: sdhi0_clk@e6150074 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150074 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <0>, <&extal2_clk>; + #clock-cells = <0>; + clock-output-names = "sdhi0ck"; + }; + sdhi1_clk: sdhi1_clk@e6150078 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150078 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <0>, <&extal2_clk>; + #clock-cells = <0>; + clock-output-names = "sdhi1ck"; + }; + sdhi2_clk: sdhi2_clk@e615007c { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe615007c 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <0>, <&extal2_clk>; + #clock-cells = <0>; + clock-output-names = "sdhi2ck"; + }; + mmc0_clk: mmc0_clk@e6150240 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150240 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <0>, <&extal2_clk>; + #clock-cells = <0>; + clock-output-names = "mmc0"; + }; + mmc1_clk: mmc1_clk@e6150244 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150244 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <0>, <&extal2_clk>; + #clock-cells = <0>; + clock-output-names = "mmc1"; + }; + vclk1_clk: vclk1_clk@e6150008 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150008 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <0>, <&extal2_clk>, <&main_div2_clk>, + <&extalr_clk>, <0>, <0>; + #clock-cells = <0>; + clock-output-names = "vclk1"; + }; + vclk2_clk: vclk2_clk@e615000c { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe615000c 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <0>, <&extal2_clk>, <&main_div2_clk>, + <&extalr_clk>, <0>, <0>; + #clock-cells = <0>; + clock-output-names = "vclk2"; + }; + vclk3_clk: vclk3_clk@e615001c { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe615001c 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <0>, <&extal2_clk>, <&main_div2_clk>, + <&extalr_clk>, <0>, <0>; + #clock-cells = <0>; + clock-output-names = "vclk3"; + }; + vclk4_clk: vclk4_clk@e6150014 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150014 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <0>, <&extal2_clk>, <&main_div2_clk>, + <&extalr_clk>, <0>, <0>; + #clock-cells = <0>; + clock-output-names = "vclk4"; + }; + vclk5_clk: vclk5_clk@e6150034 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150034 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <0>, <&extal2_clk>, <&main_div2_clk>, + <&extalr_clk>, <0>, <0>; + #clock-cells = <0>; + clock-output-names = "vclk5"; + }; + fsia_clk: fsia_clk@e6150018 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150018 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <&fsiack_clk>, <0>; + #clock-cells = <0>; + clock-output-names = "fsia"; + }; + fsib_clk: fsib_clk@e6150090 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150090 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <&fsibck_clk>, <0>; + #clock-cells = <0>; + clock-output-names = "fsib"; + }; + mp_clk: mp_clk@e6150080 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150080 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <&extal2_clk>, <&extal2_clk>; + #clock-cells = <0>; + clock-output-names = "mp"; + }; + m4_clk: m4_clk@e6150098 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150098 0 4>; + clocks = <&cpg_clocks R8A73A4_CLK_PLL2S>; + #clock-cells = <0>; + clock-output-names = "m4"; + }; + hsi_clk: hsi_clk@e615026c { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe615026c 0 4>; + clocks = <&cpg_clocks R8A73A4_CLK_PLL2H>, <&pll1_div2_clk>, + <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>; + #clock-cells = <0>; + clock-output-names = "hsi"; + }; + spuv_clk: spuv_clk@e6150094 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150094 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <&extal2_clk>, <&extal2_clk>; + #clock-cells = <0>; + clock-output-names = "spuv"; + }; + + /* Fixed factor clocks */ + main_div2_clk: main_div2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A73A4_CLK_MAIN>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "main_div2"; + }; + pll0_div2_clk: pll0_div2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A73A4_CLK_PLL0>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "pll0_div2"; + }; + pll1_div2_clk: pll1_div2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A73A4_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "pll1_div2"; + }; + extal1_div2_clk: extal1_div2_clk { + compatible = "fixed-factor-clock"; + clocks = <&extal1_clk>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "extal1_div2"; + }; + + /* Gate clocks */ + mstp2_clks: mstp2_clks@e6150138 { + compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; + clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, + <&mp_clk>, <&mp_clk>, <&cpg_clocks R8A73A4_CLK_HP>; + #clock-cells = <1>; + clock-indices = < + R8A73A4_CLK_SCIFA0 R8A73A4_CLK_SCIFA1 + R8A73A4_CLK_SCIFB0 R8A73A4_CLK_SCIFB1 + R8A73A4_CLK_SCIFB2 R8A73A4_CLK_SCIFB3 + R8A73A4_CLK_DMAC + >; + clock-output-names = + "scifa0", "scifa1", "scifb0", "scifb1", + "scifb2", "scifb3", "dmac"; + }; + mstp3_clks: mstp3_clks@e615013c { + compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; + clocks = <&cpg_clocks R8A73A4_CLK_HP>, <&mmc1_clk>, + <&sdhi2_clk>, <&sdhi1_clk>, <&sdhi0_clk>, + <&mmc0_clk>, <&cpg_clocks R8A73A4_CLK_HP>, + <&cpg_clocks R8A73A4_CLK_HP>, <&cpg_clocks + R8A73A4_CLK_HP>, <&cpg_clocks + R8A73A4_CLK_HP>, <&extalr_clk>; + #clock-cells = <1>; + clock-indices = < + R8A73A4_CLK_IIC2 R8A73A4_CLK_MMCIF1 + R8A73A4_CLK_SDHI2 R8A73A4_CLK_SDHI1 + R8A73A4_CLK_SDHI0 R8A73A4_CLK_MMCIF0 + R8A73A4_CLK_IIC6 R8A73A4_CLK_IIC7 + R8A73A4_CLK_IIC0 R8A73A4_CLK_IIC1 + R8A73A4_CLK_CMT1 + >; + clock-output-names = + "iic2", "mmcif1", "sdhi2", "sdhi1", "sdhi0", + "mmcif0", "iic6", "iic7", "iic0", "iic1", + "cmt1"; + }; + mstp4_clks: mstp4_clks@e6150140 { + compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; + clocks = <&main_div2_clk>, <&cpg_clocks R8A73A4_CLK_HP>, + <&cpg_clocks R8A73A4_CLK_HP>; + #clock-cells = <1>; + clock-indices = < + R8A73A4_CLK_IIC5 R8A73A4_CLK_IIC4 + R8A73A4_CLK_IIC3 + >; + clock-output-names = + "iic5", "iic4", "iic3"; + }; + mstp5_clks: mstp5_clks@e6150144 { + compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; + clocks = <&extal2_clk>, <&cpg_clocks R8A73A4_CLK_HP>; + #clock-cells = <1>; + clock-indices = < + R8A73A4_CLK_THERMAL R8A73A4_CLK_IIC8 + >; + clock-output-names = + "thermal", "iic8"; + }; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,sysc-r8a73a4", "renesas,sysc-rmobile"; + reg = <0 0xe6180000 0 0x8000>, <0 0xe6188000 0 0x8000>; + + pm-domains { + pd_c5: c5 { + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_c4: c4@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a3sg: a3sg@16 { + reg = <16>; + #power-domain-cells = <0>; + }; + + pd_a3ex: a3ex@17 { + reg = <17>; + #power-domain-cells = <0>; + }; + + pd_a3sp: a3sp@18 { + reg = <18>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a2us: a2us@19 { + reg = <19>; + #power-domain-cells = <0>; + }; + }; + + pd_a3sm: a3sm@20 { + reg = <20>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a2sl: a2sl@21 { + reg = <21>; + #power-domain-cells = <0>; + }; + }; + + pd_a3km: a3km@22 { + reg = <22>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a2kl: a2kl@23 { + reg = <23>; + #power-domain-cells = <0>; + }; + }; + }; + + pd_c4ma: c4ma@1 { + reg = <1>; + #power-domain-cells = <0>; + }; + + pd_c4cl: c4cl@2 { + reg = <2>; + #power-domain-cells = <0>; + }; + + pd_d4: d4@3 { + reg = <3>; + #power-domain-cells = <0>; + }; + + pd_a4bc: a4bc@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a3bc: a3bc@5 { + reg = <5>; + #power-domain-cells = <0>; + }; + }; + + pd_a4l: a4l@6 { + reg = <6>; + #power-domain-cells = <0>; + }; + + pd_a4lc: a4lc@7 { + reg = <7>; + #power-domain-cells = <0>; + }; + + pd_a4mp: a4mp@8 { + reg = <8>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a3mp: a3mp@9 { + reg = <9>; + #power-domain-cells = <0>; + }; + + pd_a3vc: a3vc@10 { + reg = <10>; + #power-domain-cells = <0>; + }; + }; + + pd_a4sf: a4sf@11 { + reg = <11>; + #power-domain-cells = <0>; + }; + + pd_a3r: a3r@12 { + reg = <12>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a2rv: a2rv@13 { + reg = <13>; + #power-domain-cells = <0>; + }; + + pd_a2is: a2is@14 { + reg = <14>; + #power-domain-cells = <0>; + }; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 8a092605d641f7d40827104404baed8c8e819281..83c1c3ca1b8f1400010bb28fba1d8af706633e0a 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -431,6 +431,18 @@ clock-frequency = <27000000>; clock-output-names = "dv"; }; + fmsick_clk: fmsick_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "fmsick"; + }; + fmsock_clk: fmsock_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "fmsock"; + }; fsiack_clk: fsiack_clk { compatible = "fixed-clock"; #clock-cells = <0>; @@ -459,13 +471,78 @@ }; /* Variable factor clocks (DIV6) */ + vclk1_clk: vclk1_clk@e6150008 { + compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150008 4>; + clocks = <&pllc1_div2_clk>, <0>, <&dv_clk>, + <&cpg_clocks R8A7740_CLK_USB24S>, + <&extal1_div2_clk>, <&extalr_clk>, <0>, + <0>; + #clock-cells = <0>; + clock-output-names = "vclk1"; + }; + vclk2_clk: vclk2_clk@e615000c { + compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe615000c 4>; + clocks = <&pllc1_div2_clk>, <0>, <&dv_clk>, + <&cpg_clocks R8A7740_CLK_USB24S>, + <&extal1_div2_clk>, <&extalr_clk>, <0>, + <0>; + #clock-cells = <0>; + clock-output-names = "vclk2"; + }; + fmsi_clk: fmsi_clk@e6150010 { + compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150010 4>; + clocks = <&pllc1_div2_clk>, <&fmsick_clk>, <0>, <0>; + #clock-cells = <0>; + clock-output-names = "fmsi"; + }; + fmso_clk: fmso_clk@e6150014 { + compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150014 4>; + clocks = <&pllc1_div2_clk>, <&fmsock_clk>, <0>, <0>; + #clock-cells = <0>; + clock-output-names = "fmso"; + }; + fsia_clk: fsia_clk@e6150018 { + compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150018 4>; + clocks = <&pllc1_div2_clk>, <&fsiack_clk>, <0>, <0>; + #clock-cells = <0>; + clock-output-names = "fsia"; + }; sub_clk: sub_clk@e6150080 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150080 4>; - clocks = <&pllc1_div2_clk>; + clocks = <&pllc1_div2_clk>, + <&cpg_clocks R8A7740_CLK_USB24S>, <0>, <0>; #clock-cells = <0>; clock-output-names = "sub"; }; + spu_clk: spu_clk@e6150084 { + compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150084 4>; + clocks = <&pllc1_div2_clk>, + <&cpg_clocks R8A7740_CLK_USB24S>, <0>, <0>; + #clock-cells = <0>; + clock-output-names = "spu"; + }; + vou_clk: vou_clk@e6150088 { + compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150088 4>; + clocks = <&pllc1_div2_clk>, <&extal1_clk>, <&dv_clk>, + <0>; + #clock-cells = <0>; + clock-output-names = "vou"; + }; + stpro_clk: stpro_clk@e615009c { + compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe615009c 4>; + clocks = <&cpg_clocks R8A7740_CLK_PLLC0>; + #clock-cells = <0>; + clock-output-names = "stpro"; + }; /* Fixed factor clocks */ pllc1_div2_clk: pllc1_div2_clk { diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index 46a884d4517566959992b98901d6a13b94064798..787fa6f9f46ddf4d2bd0d0db9abb82e4223c2413 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -16,17 +16,191 @@ /dts-v1/; #include "r8a7778.dtsi" +#include +#include / { model = "bockw"; compatible = "renesas,bockw", "renesas,r8a7778"; + aliases { + serial0 = &scif0; + }; + chosen { bootargs = "console=ttySC0,115200 ignore_loglevel ip=dhcp root=/dev/nfs rw"; + stdout-path = &scif0; }; memory { device_type = "memory"; reg = <0x60000000 0x10000000>; }; + + fixedregulator3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4643>; + system-clock-frequency = <11289600>; + }; + }; +}; + +&bsc { + ethernet@18300000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x18300000 0x1000>; + + phy-mode = "mii"; + interrupt-parent = <&irqpin>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + reg-io-width = <4>; + vddvario-supply = <&fixedregulator3v3>; + vdd33a-supply = <&fixedregulator3v3>; + }; +}; + +&extal_clk { + clock-frequency = <33333333>; +}; + +&i2c0 { + status = "okay"; + + ak4643: sound-codec@12 { + compatible = "asahi-kasei,ak4643"; + #sound-dai-cells = <0>; + reg = <0x12>; + }; + + camera@41 { + compatible = "oki,ml86v7667"; + reg = <0x41>; + }; + + camera@43 { + compatible = "oki,ml86v7667"; + reg = <0x43>; + }; + + rx8581: rtc@51 { + compatible = "epson,rx8581"; + reg = <0x51>; + }; +}; + +&mmcif { + pinctrl-0 = <&mmc_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&fixedregulator3v3>; + bus-width = <8>; + broken-cd; + status = "okay"; +}; + +&irqpin { + status = "okay"; +}; + +&tmu0 { + status = "okay"; +}; + +&pfc { + scif0_pins: serial0 { + renesas,groups = "scif0_data_a", "scif0_ctrl"; + renesas,function = "scif0"; + }; + + mmc_pins: mmc { + renesas,groups = "mmc_data8", "mmc_ctrl"; + renesas,function = "mmc"; + }; + + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", + "sdhi0_cd"; + renesas,function = "sdhi0"; + }; + + hspi0_pins: hspi0 { + renesas,groups = "hspi0_a"; + renesas,function = "hspi0"; + }; + + usb0_pins: usb0 { + renesas,groups = "usb0"; + renesas,function = "usb0"; + }; + + usb1_pins: usb1 { + renesas,groups = "usb1"; + renesas,function = "usb1"; + }; + + vin0_pins: vin0 { + renesas,groups = "vin0_data8", "vin0_clk"; + renesas,function = "vin0"; + }; + + vin1_pins: vin1 { + renesas,groups = "vin1_data8", "vin1_clk"; + renesas,function = "vin1"; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&fixedregulator3v3>; + bus-width = <4>; + status = "okay"; + wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; +}; + +&hspi0 { + pinctrl-0 = <&hspi0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl008k"; + reg = <0>; + spi-max-frequency = <104000000>; + m25p,fast-read; + + partition@0 { + label = "data(spi)"; + reg = <0x00000000 0x00100000>; + }; + }; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index ef8533910029620e5cb974bdafece1c2f90a3e1d..868f9730953350e9bb8b368b7b71efb5a85e7144 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -16,6 +16,7 @@ /include/ "skeleton.dtsi" +#include #include / { @@ -40,6 +41,24 @@ spi2 = &hspi2; }; + bsc: bus@1c000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1c000000>; + }; + + ether: ethernet@fde00000 { + compatible = "renesas,ether-r8a7778"; + reg = <0xfde00000 0x400>; + interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7778_CLK_ETHER>; + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@fe438000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -132,6 +151,7 @@ compatible = "renesas,i2c-r8a7778"; reg = <0xffc70000 0x1000>; interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_I2C0>; status = "disabled"; }; @@ -141,6 +161,7 @@ compatible = "renesas,i2c-r8a7778"; reg = <0xffc71000 0x1000>; interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_I2C1>; status = "disabled"; }; @@ -150,6 +171,7 @@ compatible = "renesas,i2c-r8a7778"; reg = <0xffc72000 0x1000>; interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_I2C2>; status = "disabled"; }; @@ -159,6 +181,7 @@ compatible = "renesas,i2c-r8a7778"; reg = <0xffc73000 0x1000>; interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_I2C3>; status = "disabled"; }; @@ -168,6 +191,8 @@ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, <0 33 IRQ_TYPE_LEVEL_HIGH>, <0 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_TMU0>; + clock-names = "fck"; #renesas,channels = <3>; @@ -180,6 +205,8 @@ interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>, <0 37 IRQ_TYPE_LEVEL_HIGH>, <0 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_TMU1>; + clock-names = "fck"; #renesas,channels = <3>; @@ -192,16 +219,75 @@ interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>, <0 41 IRQ_TYPE_LEVEL_HIGH>, <0 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_TMU2>; + clock-names = "fck"; #renesas,channels = <3>; status = "disabled"; }; + rcar_sound: sound@ffd90000 { + #sound-dai-cells = <1>; + compatible = "renesas,rcar_sound-r8a7778", "renesas,rcar_sound-gen1"; + reg = <0xffd90000 0x1000>, /* SRU */ + <0xffd91000 0x1240>, /* SSI */ + <0xfffe0000 0x24>; /* ADG */ + clocks = <&mstp3_clks R8A7778_CLK_SSI8>, + <&mstp3_clks R8A7778_CLK_SSI7>, + <&mstp3_clks R8A7778_CLK_SSI6>, + <&mstp3_clks R8A7778_CLK_SSI5>, + <&mstp3_clks R8A7778_CLK_SSI4>, + <&mstp0_clks R8A7778_CLK_SSI3>, + <&mstp0_clks R8A7778_CLK_SSI2>, + <&mstp0_clks R8A7778_CLK_SSI1>, + <&mstp0_clks R8A7778_CLK_SSI0>, + <&mstp5_clks R8A7778_CLK_SRU_SRC8>, + <&mstp5_clks R8A7778_CLK_SRU_SRC7>, + <&mstp5_clks R8A7778_CLK_SRU_SRC6>, + <&mstp5_clks R8A7778_CLK_SRU_SRC5>, + <&mstp5_clks R8A7778_CLK_SRU_SRC4>, + <&mstp5_clks R8A7778_CLK_SRU_SRC3>, + <&mstp5_clks R8A7778_CLK_SRU_SRC2>, + <&mstp5_clks R8A7778_CLK_SRU_SRC1>, + <&mstp5_clks R8A7778_CLK_SRU_SRC0>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, + <&cpg_clocks R8A7778_CLK_S1>; + clock-names = "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4", + "ssi.3", "ssi.2", "ssi.1", "ssi.0", + "src.8", "src.7", "src.6", "src.5", "src.4", + "src.3", "src.2", "src.1", "src.0", + "clk_a", "clk_b", "clk_c", "clk_i"; + + status = "disabled"; + + rcar_sound,src { + src3: src@3 { }; + src4: src@4 { }; + src5: src@5 { }; + src6: src@6 { }; + src7: src@7 { }; + src8: src@8 { }; + src9: src@9 { }; + }; + + rcar_sound,ssi { + ssi3: ssi@3 { interrupts = <0 0x85 IRQ_TYPE_LEVEL_HIGH>; }; + ssi4: ssi@4 { interrupts = <0 0x85 IRQ_TYPE_LEVEL_HIGH>; }; + ssi5: ssi@5 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi6: ssi@6 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi7: ssi@7 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi8: ssi@8 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi9: ssi@9 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + }; + }; + scif0: serial@ffe40000 { compatible = "renesas,scif-r8a7778", "renesas,scif"; reg = <0xffe40000 0x100>; interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF0>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -209,6 +295,8 @@ compatible = "renesas,scif-r8a7778", "renesas,scif"; reg = <0xffe41000 0x100>; interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF1>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -216,6 +304,8 @@ compatible = "renesas,scif-r8a7778", "renesas,scif"; reg = <0xffe42000 0x100>; interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF2>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -223,6 +313,8 @@ compatible = "renesas,scif-r8a7778", "renesas,scif"; reg = <0xffe43000 0x100>; interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF3>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -230,6 +322,8 @@ compatible = "renesas,scif-r8a7778", "renesas,scif"; reg = <0xffe44000 0x100>; interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF4>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -237,6 +331,8 @@ compatible = "renesas,scif-r8a7778", "renesas,scif"; reg = <0xffe45000 0x100>; interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF5>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -244,6 +340,7 @@ compatible = "renesas,sh-mmcif"; reg = <0xffe4e000 0x100>; interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7778_CLK_MMC>; status = "disabled"; }; @@ -251,6 +348,7 @@ compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4c000 0x100>; interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7778_CLK_SDHI0>; status = "disabled"; }; @@ -258,6 +356,7 @@ compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4d000 0x100>; interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7778_CLK_SDHI1>; status = "disabled"; }; @@ -265,6 +364,7 @@ compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4f000 0x100>; interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7778_CLK_SDHI2>; status = "disabled"; }; @@ -272,6 +372,7 @@ compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc7000 0x18>; interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_HSPI>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -281,6 +382,7 @@ compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc8000 0x18>; interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_HSPI>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -290,8 +392,199 @@ compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc6000 0x18>; interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_HSPI>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* External input clock */ + extal_clk: extal_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "extal"; + }; + + /* Special CPG clocks */ + cpg_clocks: cpg_clocks@ffc80000 { + compatible = "renesas,r8a7778-cpg-clocks"; + reg = <0xffc80000 0x80>; + #clock-cells = <1>; + clocks = <&extal_clk>; + clock-output-names = "plla", "pllb", "b", + "out", "p", "s", "s1"; + }; + + /* Audio clocks; frequencies are set by boards if applicable. */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "audio_clk_a"; + }; + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "audio_clk_b"; + }; + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "audio_clk_c"; + }; + + /* Fixed ratio clocks */ + g_clk: g_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7778_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "g"; + }; + i_clk: i_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7778_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clock-output-names = "i"; + }; + s3_clk: s3_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7778_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "s3"; + }; + s4_clk: s4_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7778_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "s4"; + }; + z_clk: z_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7778_CLK_PLLB>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clock-output-names = "z"; + }; + + /* Gate clocks */ + mstp0_clks: mstp0_clks@ffc80030 { + compatible = "renesas,r8a7778-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xffc80030 4>; + clocks = <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_S>; + #clock-cells = <1>; + clock-indices = < + R8A7778_CLK_I2C0 R8A7778_CLK_I2C1 + R8A7778_CLK_I2C2 R8A7778_CLK_I2C3 + R8A7778_CLK_SCIF0 R8A7778_CLK_SCIF1 + R8A7778_CLK_SCIF2 R8A7778_CLK_SCIF3 + R8A7778_CLK_SCIF4 R8A7778_CLK_SCIF5 + R8A7778_CLK_TMU0 R8A7778_CLK_TMU1 + R8A7778_CLK_TMU2 R8A7778_CLK_SSI0 + R8A7778_CLK_SSI1 R8A7778_CLK_SSI2 + R8A7778_CLK_SSI3 R8A7778_CLK_SRU + R8A7778_CLK_HSPI + >; + clock-output-names = + "i2c0", "i2c1", "i2c2", "i2c3", "scif0", + "scif1", "scif2", "scif3", "scif4", "scif5", + "tmu0", "tmu1", "tmu2", "ssi0", "ssi1", + "ssi2", "ssi3", "sru", "hspi"; + }; + mstp1_clks: mstp1_clks@ffc80034 { + compatible = "renesas,r8a7778-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xffc80034 4>, <0xffc80044 4>; + clocks = <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_S>, + <&cpg_clocks R8A7778_CLK_S>, + <&cpg_clocks R8A7778_CLK_P>; + #clock-cells = <1>; + clock-indices = < + R8A7778_CLK_ETHER R8A7778_CLK_VIN0 + R8A7778_CLK_VIN1 R8A7778_CLK_USB + >; + clock-output-names = + "ether", "vin0", "vin1", "usb"; + }; + mstp3_clks: mstp3_clks@ffc8003c { + compatible = "renesas,r8a7778-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xffc8003c 4>; + clocks = <&s4_clk>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>; + #clock-cells = <1>; + clock-indices = < + R8A7778_CLK_MMC R8A7778_CLK_SDHI0 + R8A7778_CLK_SDHI1 R8A7778_CLK_SDHI2 + R8A7778_CLK_SSI4 R8A7778_CLK_SSI5 + R8A7778_CLK_SSI6 R8A7778_CLK_SSI7 + R8A7778_CLK_SSI8 + >; + clock-output-names = + "mmc", "sdhi0", "sdhi1", "sdhi2", "ssi4", + "ssi5", "ssi6", "ssi7", "ssi8"; + }; + mstp5_clks: mstp5_clks@ffc80054 { + compatible = "renesas,r8a7778-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xffc80054 4>; + clocks = <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>; + #clock-cells = <1>; + clock-indices = < + R8A7778_CLK_SRU_SRC0 R8A7778_CLK_SRU_SRC1 + R8A7778_CLK_SRU_SRC2 R8A7778_CLK_SRU_SRC3 + R8A7778_CLK_SRU_SRC4 R8A7778_CLK_SRU_SRC5 + R8A7778_CLK_SRU_SRC6 R8A7778_CLK_SRU_SRC7 + R8A7778_CLK_SRU_SRC8 + >; + clock-output-names = + "sru-src0", "sru-src1", "sru-src2", + "sru-src3", "sru-src4", "sru-src5", + "sru-src6", "sru-src7", "sru-src8"; + }; + }; }; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index e83d40e24bcd48113d6bd1051f44413710af8b59..540756cdf3914a2af398d08734a48aa5b93ea21b 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -122,6 +122,12 @@ }; }; }; + + x3_clk: x3-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <65000000>; + }; }; &du { @@ -129,6 +135,9 @@ pinctrl-names = "default"; status = "okay"; + clocks = <&mstp1_clks R8A7779_CLK_DU>, <&x3_clk>; + clock-names = "du", "dclkin.0"; + ports { port@0 { endpoint { diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 0c3b6783b72add5d05001c35f39d1da6e55f141b..aaa4f258e279ccfac92ff1142faf4fe83ce3195d 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -222,6 +222,29 @@ }; }; }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + x2_clk: x2-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; + + x13_clk: x13-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; }; &du { @@ -229,12 +252,26 @@ pinctrl-names = "default"; status = "okay"; + clocks = <&mstp7_clks R8A7790_CLK_DU0>, + <&mstp7_clks R8A7790_CLK_DU1>, + <&mstp7_clks R8A7790_CLK_DU2>, + <&mstp7_clks R8A7790_CLK_LVDS0>, + <&mstp7_clks R8A7790_CLK_LVDS1>, + <&x13_clk>, <&x2_clk>; + clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1", + "dclkin.0", "dclkin.1"; + ports { port@0 { endpoint { remote-endpoint = <&adv7123_in>; }; }; + port@1 { + endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; port@2 { lvds_connector: endpoint { }; @@ -506,6 +543,38 @@ }; }; }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; }; &iic3 { @@ -513,9 +582,27 @@ pinctrl-0 = <&iic3_pins>; status = "okay"; + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; + vdd_dvfs: regulator@68 { compatible = "dlg,da9210"; reg = <0x68>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 4b38fc92011472e0684107cce5283eb7b1b3a937..4bb2f4c17321bd55f97050cb59c1690e45f24cf5 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1,6 +1,7 @@ /* * Device Tree Source for the r8a7790 SoC * + * Copyright (C) 2015 Renesas Electronics Corporation * Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded Inc. * @@ -369,13 +370,6 @@ dma-channels = <13>; }; - audmapp: dma-controller@ec740000 { - compatible = "renesas,rcar-audmapp"; - #dma-cells = <1>; - - reg = <0 0xec740000 0 0x200>; - }; - i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; @@ -493,17 +487,21 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7790"; - reg = <0 0xee100000 0 0x200>; + reg = <0 0xee100000 0 0x328>; interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI0>; + dmas = <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx"; status = "disabled"; }; sdhi1: sd@ee120000 { compatible = "renesas,sdhi-r8a7790"; - reg = <0 0xee120000 0 0x200>; + reg = <0 0xee120000 0 0x328>; interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI1>; + dmas = <&dmac1 0xc9>, <&dmac1 0xca>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -512,6 +510,8 @@ reg = <0 0xee140000 0 0x100>; interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI2>; + dmas = <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -520,6 +520,8 @@ reg = <0 0xee160000 0 0x100>; interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI3>; + dmas = <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -792,6 +794,26 @@ }; }; + can0: can@e6e80000 { + compatible = "renesas,can-r8a7790"; + reg = <0 0xe6e80000 0 0x1000>; + interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7790_CLK_RCAN0>, + <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + status = "disabled"; + }; + + can1: can@e6e88000 { + compatible = "renesas,can-r8a7790"; + reg = <0 0xe6e88000 0 0x1000>; + interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7790_CLK_RCAN1>, + <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + status = "disabled"; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -838,16 +860,34 @@ clock-output-names = "audio_clk_c"; }; + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + clock-output-names = "usb_extal"; + }; + + /* External CAN clock */ + can_clk: can_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + clock-output-names = "can_clk"; + status = "disabled"; + }; + /* Special CPG clocks */ cpg_clocks: cpg_clocks@e6150000 { compatible = "renesas,r8a7790-cpg-clocks", "renesas,rcar-gen2-cpg-clocks"; reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk>; + clocks = <&extal_clk &usb_extal_clk>; #clock-cells = <1>; clock-output-names = "main", "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", - "z"; + "z", "rcan", "adsp"; }; /* Variable factor clocks */ @@ -1121,18 +1161,21 @@ mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; - clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>; + clocks = <&hp_clk>, <&hp_clk>, <&cpg_clocks R8A7790_CLK_ADSP>, + <&extal_clk>, <&p_clk>; #clock-cells = <1>; clock-indices = < R8A7790_CLK_AUDIO_DMAC0 R8A7790_CLK_AUDIO_DMAC1 - R8A7790_CLK_THERMAL R8A7790_CLK_PWM + R8A7790_CLK_ADSP_MOD R8A7790_CLK_THERMAL + R8A7790_CLK_PWM >; - clock-output-names = "audmac0", "audmac1", "thermal", "pwm"; + clock-output-names = "audmac0", "audmac1", "adsp_mod", + "thermal", "pwm"; }; mstp7_clks: mstp7_clks@e615014c { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; - clocks = <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, + clocks = <&mp_clk>, <&hp_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>; #clock-cells = <1>; @@ -1410,7 +1453,10 @@ reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x1280>; /* SSI */ + <0 0xec541000 0 0x1280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>, <&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>, @@ -1435,34 +1481,171 @@ status = "disabled"; rcar_sound,dvc { - dvc0: dvc@0 { }; - dvc1: dvc@1 { }; + dvc0: dvc@0 { + dmas = <&audma0 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc@1 { + dmas = <&audma0 0xbe>; + dma-names = "tx"; + }; }; rcar_sound,src { - src0: src@0 { interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; }; - src1: src@1 { interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; }; - src2: src@2 { interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; }; - src3: src@3 { interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; }; - src4: src@4 { interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; }; - src5: src@5 { interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; }; - src6: src@6 { interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; }; - src7: src@7 { interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; }; - src8: src@8 { interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; }; - src9: src@9 { interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; }; + src0: src@0 { + interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src@1 { + interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src@2 { + interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src@3 { + interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src@4 { + interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src@5 { + interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src@6 { + interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src@7 { + interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src@8 { + interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src@9 { + interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; }; rcar_sound,ssi { - ssi0: ssi@0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; }; - ssi1: ssi@1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; }; - ssi2: ssi@2 { interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; }; - ssi3: ssi@3 { interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; }; - ssi4: ssi@4 { interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; }; - ssi5: ssi@5 { interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; }; - ssi6: ssi@6 { interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; }; - ssi7: ssi@7 { interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; }; - ssi8: ssi@8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; }; - ssi9: ssi@9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; }; + ssi0: ssi@0 { + interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi@1 { + interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi@2 { + interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi@3 { + interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi@4 { + interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi@5 { + interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi@6 { + interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi@7 { + interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi@8 { + interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi@9 { + interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; }; }; + + ipmmu_sy0: mmu@e6280000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xe6280000 0 0x1000>; + interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>, + <0 224 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_sy1: mmu@e6290000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xe6290000 0 0x1000>; + interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_ds: mmu@e6740000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xe6740000 0 0x1000>; + interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, + <0 199 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mp: mmu@ec680000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xec680000 0 0x1000>; + interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mx: mmu@fe951000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xfe951000 0 0x1000>; + interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, + <0 221 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xffc80000 0 0x1000>; + interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts index d2ebf11f98814ab59c7d0a6d8987bd7c21e360a0..e33e4047b0b0c9207494e8cb3e30e4f2ac7bc6ee 100644 --- a/arch/arm/boot/dts/r8a7791-henninger.dts +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -141,6 +141,11 @@ renesas,groups = "vin0_data8", "vin0_clk"; renesas,function = "vin0"; }; + + can0_pins: can0 { + renesas,groups = "can0_data"; + renesas,function = "can0"; + }; }; &scif0 { @@ -307,3 +312,9 @@ }; }; }; + +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index a3c27807f6c516e8c28b75642cb2df3c1a259e5e..824ddab9c3adcbde11ac8ea62f339af6aa1b3ec6 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -258,6 +258,29 @@ system-clock-frequency = <11289600>; }; }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + x2_clk: x2-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; + + x13_clk: x13-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; }; &du { @@ -265,7 +288,19 @@ pinctrl-names = "default"; status = "okay"; + clocks = <&mstp7_clks R8A7791_CLK_DU0>, + <&mstp7_clks R8A7791_CLK_DU1>, + <&mstp7_clks R8A7791_CLK_LVDS0>, + <&x13_clk>, <&x2_clk>; + clock-names = "du.0", "du.1", "lvds.0", + "dclkin.0", "dclkin.1"; + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; port@1 { lvds_connector: endpoint { }; @@ -284,7 +319,7 @@ }; du_pins: du { - renesas,groups = "du_rgb666", "du_sync", "du_clk_out_0"; + renesas,groups = "du_rgb666", "du_sync", "du_disp", "du_clk_out_0"; renesas,function = "du"; }; @@ -506,6 +541,38 @@ }; }; + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio3>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + eeprom@50 { compatible = "renesas,24c02"; reg = <0x50>; @@ -517,9 +584,27 @@ status = "okay"; clock-frequency = <100000>; + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; + vdd_dvfs: regulator@68 { compatible = "dlg,da9210"; reg = <0x68>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index e35812a0d8d40e8c986c58ea71f529b54c1f5cc6..4696062f6ddeaaeb27a4260bd8932238ec461a2a 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for the r8a7791 SoC * - * Copyright (C) 2013-2014 Renesas Electronics Corporation + * Copyright (C) 2013-2015 Renesas Electronics Corporation * Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded Inc. * @@ -357,13 +357,6 @@ dma-channels = <13>; }; - audmapp: dma-controller@ec740000 { - compatible = "renesas,rcar-audmapp"; - #dma-cells = <1>; - - reg = <0 0xec740000 0 0x200>; - }; - /* The memory map in the User's Manual maps the cores to bus numbers */ i2c0: i2c@e6508000 { #address-cells = <1>; @@ -482,9 +475,11 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7791"; - reg = <0 0xee100000 0 0x200>; + reg = <0 0xee100000 0 0x328>; interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI0>; + dmas = <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -493,6 +488,8 @@ reg = <0 0xee140000 0 0x100>; interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI1>; + dmas = <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -501,6 +498,8 @@ reg = <0 0xee160000 0 0x100>; interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI2>; + dmas = <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -816,6 +815,26 @@ }; }; + can0: can@e6e80000 { + compatible = "renesas,can-r8a7791"; + reg = <0 0xe6e80000 0 0x1000>; + interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7791_CLK_RCAN0>, + <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + status = "disabled"; + }; + + can1: can@e6e88000 { + compatible = "renesas,can-r8a7791"; + reg = <0 0xe6e88000 0 0x1000>; + interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7791_CLK_RCAN1>, + <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + status = "disabled"; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -862,31 +881,50 @@ status = "disabled"; }; + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + clock-output-names = "usb_extal"; + }; + + /* External CAN clock */ + can_clk: can_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + clock-output-names = "can_clk"; + status = "disabled"; + }; + /* Special CPG clocks */ cpg_clocks: cpg_clocks@e6150000 { compatible = "renesas,r8a7791-cpg-clocks", "renesas,rcar-gen2-cpg-clocks"; reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk>; + clocks = <&extal_clk &usb_extal_clk>; #clock-cells = <1>; clock-output-names = "main", "pll0", "pll1", "pll3", - "lb", "qspi", "sdh", "sd0", "z"; + "lb", "qspi", "sdh", "sd0", "z", + "rcan", "adsp"; }; /* Variable factor clocks */ - sd1_clk: sd2_clk@e6150078 { + sd2_clk: sd2_clk@e6150078 { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150078 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd1"; + clock-output-names = "sd2"; }; - sd2_clk: sd3_clk@e615026c { + sd3_clk: sd3_clk@e615026c { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615026c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd2"; + clock-output-names = "sd3"; }; mmc0_clk: mmc0_clk@e6150240 { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; @@ -1107,7 +1145,7 @@ mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>, + clocks = <&cp_clk>, <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7791_CLK_SD0>, <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; @@ -1125,18 +1163,21 @@ mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; - clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>; + clocks = <&hp_clk>, <&hp_clk>, <&cpg_clocks R8A7791_CLK_ADSP>, + <&extal_clk>, <&p_clk>; #clock-cells = <1>; clock-indices = < R8A7791_CLK_AUDIO_DMAC0 R8A7791_CLK_AUDIO_DMAC1 - R8A7791_CLK_THERMAL R8A7791_CLK_PWM + R8A7791_CLK_ADSP_MOD R8A7791_CLK_THERMAL + R8A7791_CLK_PWM >; - clock-output-names = "audmac0", "audmac1", "thermal", "pwm"; + clock-output-names = "audmac0", "audmac1", "adsp_mod", + "thermal", "pwm"; }; mstp7_clks: mstp7_clks@e615014c { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; - clocks = <&mp_clk>, <&mp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, + clocks = <&mp_clk>, <&hp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>; #clock-cells = <1>; @@ -1154,7 +1195,7 @@ mstp8_clks: mstp8_clks@e6150990 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; - clocks = <&zg_clk>, <&hp_clk>, <&zg_clk>, <&zg_clk>, + clocks = <&zx_clk>, <&hp_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; clock-indices = < @@ -1384,6 +1425,66 @@ status = "disabled"; }; + ipmmu_sy0: mmu@e6280000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xe6280000 0 0x1000>; + interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>, + <0 224 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_sy1: mmu@e6290000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xe6290000 0 0x1000>; + interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_ds: mmu@e6740000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xe6740000 0 0x1000>; + interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, + <0 199 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mp: mmu@ec680000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xec680000 0 0x1000>; + interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mx: mmu@fe951000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xfe951000 0 0x1000>; + interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, + <0 221 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xffc80000 0 0x1000>; + interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_gp: mmu@e62a0000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xe62a0000 0 0x1000>; + interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>, + <0 261 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + rcar_sound: rcar_sound@ec500000 { /* * #sound-dai-cells is required @@ -1395,7 +1496,10 @@ reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x1280>; /* SSI */ + <0 0xec541000 0 0x1280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + clocks = <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI9>, <&mstp10_clks R8A7791_CLK_SSI8>, <&mstp10_clks R8A7791_CLK_SSI7>, <&mstp10_clks R8A7791_CLK_SSI6>, @@ -1420,34 +1524,120 @@ status = "disabled"; rcar_sound,dvc { - dvc0: dvc@0 { }; - dvc1: dvc@1 { }; + dvc0: dvc@0 { + dmas = <&audma0 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc@1 { + dmas = <&audma0 0xbe>; + dma-names = "tx"; + }; }; rcar_sound,src { - src0: src@0 { interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; }; - src1: src@1 { interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; }; - src2: src@2 { interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; }; - src3: src@3 { interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; }; - src4: src@4 { interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; }; - src5: src@5 { interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; }; - src6: src@6 { interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; }; - src7: src@7 { interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; }; - src8: src@8 { interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; }; - src9: src@9 { interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; }; + src0: src@0 { + interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src@1 { + interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src@2 { + interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src@3 { + interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src@4 { + interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src@5 { + interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src@6 { + interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src@7 { + interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src@8 { + interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src@9 { + interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; }; rcar_sound,ssi { - ssi0: ssi@0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; }; - ssi1: ssi@1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; }; - ssi2: ssi@2 { interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; }; - ssi3: ssi@3 { interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; }; - ssi4: ssi@4 { interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; }; - ssi5: ssi@5 { interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; }; - ssi6: ssi@6 { interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; }; - ssi7: ssi@7 { interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; }; - ssi8: ssi@8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; }; - ssi9: ssi@9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; }; + ssi0: ssi@0 { + interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi@1 { + interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi@2 { + interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi@3 { + interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi@4 { + interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi@5 { + interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi@6 { + interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi@7 { + interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi@8 { + interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi@9 { + interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; }; }; }; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index 0d848e60507172ef8f0a7872e6b2cde4f61a7fda..928cfa641475e4f96a44232c60aacea9f7744159 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -43,6 +43,19 @@ status = "okay"; }; +ðer { + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&irqc0>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +}; + &scif2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 8f78da5ef10b603bc8324b0834e2632fec28e1e7..7a3ffa51a8bf2c8be0a5a1c990867a2a138bb06f 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -107,6 +107,66 @@ <0 17 IRQ_TYPE_LEVEL_HIGH>; }; + dmac0: dma-controller@e6700000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH + 0 200 IRQ_TYPE_LEVEL_HIGH + 0 201 IRQ_TYPE_LEVEL_HIGH + 0 202 IRQ_TYPE_LEVEL_HIGH + 0 203 IRQ_TYPE_LEVEL_HIGH + 0 204 IRQ_TYPE_LEVEL_HIGH + 0 205 IRQ_TYPE_LEVEL_HIGH + 0 206 IRQ_TYPE_LEVEL_HIGH + 0 207 IRQ_TYPE_LEVEL_HIGH + 0 208 IRQ_TYPE_LEVEL_HIGH + 0 209 IRQ_TYPE_LEVEL_HIGH + 0 210 IRQ_TYPE_LEVEL_HIGH + 0 211 IRQ_TYPE_LEVEL_HIGH + 0 212 IRQ_TYPE_LEVEL_HIGH + 0 213 IRQ_TYPE_LEVEL_HIGH + 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC0>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH + 0 216 IRQ_TYPE_LEVEL_HIGH + 0 217 IRQ_TYPE_LEVEL_HIGH + 0 218 IRQ_TYPE_LEVEL_HIGH + 0 219 IRQ_TYPE_LEVEL_HIGH + 0 308 IRQ_TYPE_LEVEL_HIGH + 0 309 IRQ_TYPE_LEVEL_HIGH + 0 310 IRQ_TYPE_LEVEL_HIGH + 0 311 IRQ_TYPE_LEVEL_HIGH + 0 312 IRQ_TYPE_LEVEL_HIGH + 0 313 IRQ_TYPE_LEVEL_HIGH + 0 314 IRQ_TYPE_LEVEL_HIGH + 0 315 IRQ_TYPE_LEVEL_HIGH + 0 316 IRQ_TYPE_LEVEL_HIGH + 0 317 IRQ_TYPE_LEVEL_HIGH + 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC1>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; + scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a7794", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; @@ -269,6 +329,41 @@ status = "disabled"; }; + ether: ethernet@ee700000 { + compatible = "renesas,ether-r8a7794"; + reg = <0 0xee700000 0 0x400>; + interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7794_CLK_ETHER>; + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7794"; + reg = <0 0xee100000 0 0x200>; + interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7794_CLK_SDHI0>; + status = "disabled"; + }; + + sdhi1: sd@ee140000 { + compatible = "renesas,sdhi-r8a7794"; + reg = <0 0xee140000 0 0x100>; + interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7794_CLK_SDHI1>; + status = "disabled"; + }; + + sdhi2: sd@ee160000 { + compatible = "renesas,sdhi-r8a7794"; + reg = <0 0xee160000 0 0x100>; + interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7794_CLK_SDHI2>; + status = "disabled"; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -294,19 +389,19 @@ "lb", "qspi", "sdh", "sd0", "z"; }; /* Variable factor clocks */ - sd1_clk: sd2_clk@e6150078 { + sd2_clk: sd2_clk@e6150078 { compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150078 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd1"; + clock-output-names = "sd2"; }; - sd2_clk: sd3_clk@e615007c { + sd3_clk: sd3_clk@e615026c { compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe615007c 0 4>; + reg = <0 0xe615026c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd2"; + clock-output-names = "sd3"; }; mmc0_clk: mmc0_clk@e6150240 { compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; @@ -518,7 +613,7 @@ mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7794_CLK_SD0>, + clocks = <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7794_CLK_SD0>, <&mmc0_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; clock-indices = < @@ -585,4 +680,54 @@ clock-output-names = "scifa3", "scifa4", "scifa5"; }; }; + + ipmmu_sy0: mmu@e6280000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xe6280000 0 0x1000>; + interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>, + <0 224 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_sy1: mmu@e6290000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xe6290000 0 0x1000>; + interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_ds: mmu@e6740000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xe6740000 0 0x1000>; + interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, + <0 199 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + }; + + ipmmu_mp: mmu@ec680000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xec680000 0 0x1000>; + interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mx: mmu@fe951000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xfe951000 0 0x1000>; + interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, + <0 221 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + }; + + ipmmu_gp: mmu@e62a0000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xe62a0000 0 0x1000>; + interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>, + <0 261 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 9a09579b8309c39fbb767c7798adee8f56062cea..bdf85701987d7d355746b26a9b68e323864c4f2b 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -103,6 +103,14 @@ regulator-always-on; regulator-boot-on; }; + + vsys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; }; &emac { @@ -148,6 +156,14 @@ pinctrl-names = "default"; pinctrl-0 = <&act8846_dvs0_ctl>; + vp1-supply = <&vsys>; + vp2-supply = <&vsys>; + vp3-supply = <&vsys>; + vp4-supply = <&vsys>; + inl1-supply = <&vcc_io>; + inl2-supply = <&vsys>; + inl3-supply = <&vsys>; + regulators { vcc_ddr: REG1 { regulator-name = "VCC_DDR"; diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index d7b8bbc0c25fa00c8ccf59ee0b1ad03485136622..1687e8336994fc4bb87b5d4edfd7d66250be9626 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -33,6 +33,7 @@ regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; + vin-supply = <&vcc_sys>; }; vdd_gpu: syr828@41 { @@ -43,6 +44,7 @@ regulator-min-microvolt = <850000>; regulator-max-microvolt = <1350000>; regulator-always-on; + vin-supply = <&vcc_sys>; }; hym8563@51 { @@ -64,6 +66,14 @@ reg = <0x5a>; status = "okay"; + vp1-supply = <&vcc_sys>; + vp2-supply = <&vcc_sys>; + vp3-supply = <&vcc_sys>; + vp4-supply = <&vcc_sys>; + inl1-supply = <&vcc_io>; + inl2-supply = <&vcc_sys>; + inl3-supply = <&vcc_20>; + regulators { vcc_ddr: REG1 { regulator-name = "VCC_DDR"; diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index a1c294bf7fed0e51a29bd9205a408819d7aeadeb..f62ea78754a956d2f562a8900e3bfcf3cdba4871 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -43,9 +43,16 @@ #clock-cells = <1>; clock-output-names = "xin32k", "rk808-clkout2"; + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; vcc8-supply = <&vcc_18>; vcc9-supply = <&vcc_io>; vcc10-supply = <&vcc_io>; + vcc11-supply = <&vcc_sys>; vcc12-supply = <&vcc_io>; vddio-supply = <&vccio_pmu>; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 5e895a514a0b82afef27ae7c7e849ed1ab8d226f..4a457518d8616044b26fbfa34bea17ebbd421f84 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -103,6 +103,15 @@ regulator-always-on; regulator-boot-on; }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; }; &emmc { @@ -238,6 +247,10 @@ }; }; +&usbphy { + status = "okay"; +}; + &usb_host0_ehci { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index e6f873abbe0dd991fcdcf5a81dbe33c09aec1e1d..b54dd78580c1c77a01035b62d8181d0cd995b18f 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -179,6 +179,22 @@ status = "okay"; }; +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "ok"; +}; + &hdmi { ddc-i2c-bus = <&i2c5>; status = "okay"; @@ -459,6 +475,10 @@ status = "okay"; }; +&usbphy { + status = "okay"; +}; + &usb_host1 { pinctrl-names = "default"; pinctrl-0 = <&usbhub_rst>; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts new file mode 100644 index 0000000000000000000000000000000000000000..d081f0e0da36c3c42fd97626a79d5e4df54bc300 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -0,0 +1,447 @@ +/* + * Copyright (c) 2014, 2015 Andy Yan + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "rk3288.dtsi" + +/ { + model = "PopMetal-RK3288"; + compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288"; + + memory{ + reg = <0 0x80000000>; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + #clock-cells = <0>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + button@0 { + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + linux,code = <116>; + label = "GPIO Key Power"; + linux,input-type = <1>; + gpio-key,wakeup = <1>; + debounce-interval = <100>; + }; + }; + + ir: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&emmc { + broken-cd; + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; /* wp not hooked up */ + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + status = "okay"; +}; + +&gmac { + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + clock_in_out = "input"; + snps,reset-gpio = <&gpio4 7 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "ok"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int &global_pwroff>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_18>; + vcc9-supply = <&vcc_io>; + vcc10-supply = <&vcc_io>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc_io>; + vddio-supply = <&vcc_io>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-name = "vdd_arm"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_lan: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_lan"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vccio_sd: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc18_lcd: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + ldo5: LDO_REG5 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ldo5"; + }; + + vdd10_lcd: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca_codec: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_codec"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_wl: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_wl"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_lcd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + ak8963: ak8963@0d { + compatible = "asahi-kasei,ak8975"; + reg = <0x0d>; + interrupt-parent = <&gpio8>; + interrupts = <1 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&comp_int>; + }; + + l3g4200d: l3g4200d@68 { + compatible = "st,l3g4200d-gyro"; + st,drdy-int-pin = <2>; + reg = <0x6b>; + }; + + mma8452: mma8452@1d { + compatible = "fsl,mma8452"; + reg = <0x1d>; + interrupt-parent = <&gpio8>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&gsensor_int>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&pinctrl { + ak8963 { + comp_int: comp-int { + rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + ir { + ir_int: ir-int { + rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + mma8452 { + gsensor_int: gsensor-int { + rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = ; + }; + }; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index eccc78d3220ba2e59e2994dfb4f5f20d3d3f7a91..165968d51d8fd7370ca596833c0e2126fc616970 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -420,6 +420,8 @@ interrupts = ; clocks = <&cru HCLK_USBHOST0>; clock-names = "usbhost"; + phys = <&usbphy1>; + phy-names = "usb"; status = "disabled"; }; @@ -432,6 +434,8 @@ interrupts = ; clocks = <&cru HCLK_USBHOST1>; clock-names = "otg"; + phys = <&usbphy2>; + phy-names = "usb2-phy"; status = "disabled"; }; @@ -442,6 +446,8 @@ interrupts = ; clocks = <&cru HCLK_OTG0>; clock-names = "otg"; + phys = <&usbphy0>; + phy-names = "usb2-phy"; status = "disabled"; }; @@ -698,6 +704,35 @@ interrupts = ; }; + usbphy: phy { + compatible = "rockchip,rk3288-usb-phy"; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + usbphy0: usb-phy0 { + #phy-cells = <0>; + reg = <0x320>; + clocks = <&cru SCLK_OTGPHY0>; + clock-names = "phyclk"; + }; + + usbphy1: usb-phy1 { + #phy-cells = <0>; + reg = <0x334>; + clocks = <&cru SCLK_OTGPHY1>; + clock-names = "phyclk"; + }; + + usbphy2: usb-phy2 { + #phy-cells = <0>; + reg = <0x348>; + clocks = <&cru SCLK_OTGPHY2>; + clock-names = "phyclk"; + }; + }; + pinctrl: pinctrl { compatible = "rockchip,rk3288-pinctrl"; rockchip,grf = <&grf>; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 367af53c1b8437d30059b32abff7dd3ed7a0c992..57ab8587f7b977d4274dfdf2380d9f363f5a06ff 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -26,6 +26,7 @@ serial2 = &usart1; serial3 = &usart2; serial4 = &usart3; + serial5 = &uart0; gpio0 = &pioA; gpio1 = &pioB; gpio2 = &pioC; @@ -206,6 +207,17 @@ status = "disabled"; }; + uart0: serial@f0024000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf0024000 0x100>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&uart0_clk>; + clock-names = "usart"; + status = "disabled"; + }; + pwm0: pwm@f002c000 { compatible = "atmel,sama5d3-pwm"; reg = <0xf002c000 0x300>; @@ -439,7 +451,7 @@ }; dbgu: serial@ffffee00 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>, @@ -764,6 +776,22 @@ }; }; + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + ; /* conflicts with ISI_PCK */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + ; /* conflicts with TWCK0, ISI_HSYNC */ + }; + }; + usart0 { pinctrl_usart0: usart0-0 { atmel,pins = @@ -1098,6 +1126,12 @@ atmel,clk-output-range = <0 66000000>; }; + uart0_clk: uart0_clk { + #clock-cells = <0>; + reg = <16>; + atmel,clk-output-range = <0 66000000>; + }; + twi0_clk: twi0_clk { reg = <18>; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts index 9089c7c6cea863e547a26d7c8d2233c138827334..d9a9aca1ccfdf6d5514b535241d7c5f2ae379e92 100644 --- a/arch/arm/boot/dts/sama5d35ek.dts +++ b/arch/arm/boot/dts/sama5d35ek.dts @@ -44,8 +44,6 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pb_user1 { label = "pb_user1"; diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi index eaf41451ad0cf5afec07ab94a03ae9e9a4bdee42..c5a3772741bf610b300a10147e76bcc882b973fb 100644 --- a/arch/arm/boot/dts/sama5d3_can.dtsi +++ b/arch/arm/boot/dts/sama5d3_can.dtsi @@ -1,5 +1,5 @@ /* - * at91sama5d3_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * sama5d3_can.dtsi - Device Tree Include file for SAMA5D3 SoC with * CAN support * * Copyright (C) 2013 Boris BREZILLON diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi index fe2af92763129beb8b4b493adbfb847684b4a264..7cb235ef0fb6dba30e77d6c91a0b9eafda6359a3 100644 --- a/arch/arm/boot/dts/sama5d3_emac.dtsi +++ b/arch/arm/boot/dts/sama5d3_emac.dtsi @@ -1,5 +1,5 @@ /* - * at91sama5d3_emac.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * sama5d3_emac.dtsi - Device Tree Include file for SAMA5D3 SoC with * Ethernet. * * Copyright (C) 2013 Boris BREZILLON @@ -41,7 +41,7 @@ }; macb1: ethernet@f802c000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; + compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/sama5d3_gmac.dtsi index de5ed59fb446d5c7cefc8ddc02d2bbe24032b9bc..23f225fbb7563e3efb4c896464b27bd3b8bf11de 100644 --- a/arch/arm/boot/dts/sama5d3_gmac.dtsi +++ b/arch/arm/boot/dts/sama5d3_gmac.dtsi @@ -1,5 +1,5 @@ /* - * at91sama5d3_gmac.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * sama5d3_gmac.dtsi - Device Tree Include file for SAMA5D3 SoC with * Gigabit Ethernet. * * Copyright (C) 2013 Boris BREZILLON diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi index 85d30270156561c3e8b44cc189482ec469c6e1af..be7cfefc6c312351a138244dbe0db7a3cc195ee0 100644 --- a/arch/arm/boot/dts/sama5d3_lcd.dtsi +++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi @@ -1,5 +1,5 @@ /* - * at91sama5d3_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * sama5d3_lcd.dtsi - Device Tree Include file for SAMA5D3 SoC with * LCD support * * Copyright (C) 2013 Boris BREZILLON @@ -13,40 +13,183 @@ / { ahb { apb { + hlcdc: hlcdc@f0030000 { + compatible = "atmel,sama5d3-hlcdc"; + reg = <0xf0030000 0x2000>; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk","sys_clk", "slow_clk"; + status = "disabled"; + + hlcdc-display-controller { + compatible = "atmel,hlcdc-display-controller"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + }; + + hlcdc_pwm: hlcdc-pwm { + compatible = "atmel,hlcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwm>; + #pwm-cells = <3>; + }; + }; + pinctrl@fffff200 { lcd { - pinctrl_lcd: lcd-0 { + pinctrl_lcd_base: lcd-base-0 { + atmel,pins = + ; /* LCDPCK */ + }; + + pinctrl_lcd_pwm: lcd-pwm-0 { + atmel,pins = ; /* LCDPWM */ + }; + + pinctrl_lcd_rgb444: lcd-rgb-0 { + atmel,pins = + ; /* LCDD11 pin */ + }; + + pinctrl_lcd_rgb565: lcd-rgb-1 { + atmel,pins = + ; /* LCDD15 pin */ + }; + + pinctrl_lcd_rgb666: lcd-rgb-2 { + atmel,pins = + ; /* LCDD17 pin */ + }; + + pinctrl_lcd_rgb666_alt: lcd-rgb-2-alt { + atmel,pins = + ; /* LCDD17 pin */ + }; + + pinctrl_lcd_rgb888: lcd-rgb-3 { + atmel,pins = + ; /* LCDD23 pin */ + }; + + pinctrl_lcd_rgb888_alt: lcd-rgb-3-alt { atmel,pins = - ; /* PE28 periph C LCDD23 pin */ + ; /* LCDD23 pin */ }; }; }; diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi index 1b02208ea6ff2b70aab43ddd416b37ef0b9a2a1f..026b252f09b3e6b2db4b6310fe19969f3332798e 100644 --- a/arch/arm/boot/dts/sama5d3_mci2.dtsi +++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi @@ -1,5 +1,5 @@ /* - * at91sama5d3_mci2.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * sama5d3_mci2.dtsi - Device Tree Include file for SAMA5D3 SoC with * 3 MMC ports * * Copyright (C) 2013 Boris BREZILLON diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi index 02848453ca0cf5447de27aaca6b233611173da4e..f7fa58fe09f1553eff94f61b2d3f38113ad95c7b 100644 --- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi @@ -1,5 +1,5 @@ /* - * at91sama5d3_tcb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * sama5d3_tcb1.dtsi - Device Tree Include file for SAMA5D3 SoC with * 2 TC blocks. * * Copyright (C) 2013 Boris BREZILLON diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi index 7a8d4c6115f72fdab533980a0f0d96eb6cb1469a..2511d748867bdd17fc3e08140b69ba5f61b594d7 100644 --- a/arch/arm/boot/dts/sama5d3_uart.dtsi +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi @@ -1,5 +1,5 @@ /* - * at91sama5d3_uart.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * sama5d3_uart.dtsi - Device Tree Include file for SAMA5D3 SoC with * UART support * * Copyright (C) 2013 Boris BREZILLON diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 4303874889c69954fa894ff458bb9bfb492f33d4..6b1bb58f9c0b609fdb3622a02c89d2d394750c81 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -64,9 +64,13 @@ gpio2 = &pioC; gpio3 = &pioD; gpio4 = &pioE; + pwm0 = &pwm0; + ssc0 = &ssc0; + ssc1 = &ssc1; tcb0 = &tcb0; tcb1 = &tcb1; i2c0 = &i2c0; + i2c1 = &i2c1; i2c2 = &i2c2; }; cpus { @@ -310,6 +314,34 @@ #size-cells = <1>; ranges; + hlcdc: hlcdc@f0000000 { + compatible = "atmel,sama5d4-hlcdc"; + reg = <0xf0000000 0x4000>; + interrupts = <51 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk","sys_clk", "slow_clk"; + status = "disabled"; + + hlcdc-display-controller { + compatible = "atmel,hlcdc-display-controller"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + }; + + hlcdc_pwm: hlcdc-pwm { + compatible = "atmel,hlcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwm>; + #pwm-cells = <3>; + }; + }; + dma1: dma-controller@f0004000 { compatible = "atmel,sama5d4-dma"; reg = <0xf0004000 0x200>; @@ -319,6 +351,21 @@ clock-names = "dma_clk"; }; + isi: isi@f0008000 { + compatible = "atmel,at91sam9g45-isi"; + reg = <0xf0008000 0x4000>; + interrupts = <52 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_isi_data_0_7>; + clocks = <&isi_clk>; + clock-names = "isi_clk"; + status = "disabled"; + port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + ramc0: ramc@f0010000 { compatible = "atmel,sama5d3-ddramc"; reg = <0xf0010000 0x200>; @@ -800,6 +847,33 @@ clock-names = "mci_clk"; }; + ssc0: ssc@f8008000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf8008000 0x4000>; + interrupts = <48 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(26))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(27))>; + dma-names = "tx", "rx"; + clocks = <&ssc0_clk>; + clock-names = "pclk"; + status = "disabled"; + }; + + pwm0: pwm@f800c000 { + compatible = "atmel,sama5d3-pwm"; + reg = <0xf800c000 0x300>; + interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>; + #pwm-cells = <3>; + clocks = <&pwm_clk>; + status = "disabled"; + }; + spi0: spi@f8010000 { #address-cells = <1>; #size-cells = <0>; @@ -839,6 +913,25 @@ status = "disabled"; }; + i2c1: i2c@f8018000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf8018000 0x4000>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(4)>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(5)>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&twi1_clk>; + status = "disabled"; + }; + tcb0: timer@f801c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf801c000 0x100>; @@ -853,6 +946,8 @@ interrupts = <54 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_rmii>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&macb0_clk>, <&macb0_clk>; clock-names = "hclk", "pclk"; status = "disabled"; @@ -953,6 +1048,24 @@ status = "disabled"; }; + ssc1: ssc@fc014000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xfc014000 0x4000>; + interrupts = <49 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(28))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(29))>; + dma-names = "tx", "rx"; + clocks = <&ssc1_clk>; + clock-names = "pclk"; + status = "disabled"; + }; + tcb1: timer@fc020000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xfc020000 0x100>; @@ -1008,6 +1121,46 @@ }; }; + aes@fc044000 { + compatible = "atmel,at91sam9g46-aes"; + reg = <0xfc044000 0x100>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(41)>, + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(40)>; + dma-names = "tx", "rx"; + clocks = <&aes_clk>; + clock-names = "aes_clk"; + status = "disabled"; + }; + + tdes@fc04c000 { + compatible = "atmel,at91sam9g46-tdes"; + reg = <0xfc04c000 0x100>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(42)>, + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(43)>; + dma-names = "tx", "rx"; + clocks = <&tdes_clk>; + clock-names = "tdes_clk"; + status = "disabled"; + }; + + sha@fc050000 { + compatible = "atmel,at91sam9g46-sha"; + reg = <0xfc050000 0x100>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(44)>; + dma-names = "tx"; + clocks = <&sha_clk>; + clock-names = "sha_clk"; + status = "disabled"; + }; + rstc@fc068600 { compatible = "atmel,at91sam9g45-rstc"; reg = <0xfc068600 0x10>; @@ -1064,7 +1217,7 @@ }; dbgu: serial@fc069000 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfc069000 0x200>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; @@ -1190,6 +1343,14 @@ }; }; + i2c1 { + pinctrl_i2c1: i2c1-0 { + atmel,pins = + ; /* TWCK1, conflicts with UART0 TX and DIBN */ + }; + }; + i2c2 { pinctrl_i2c2: i2c2-0 { atmel,pins = @@ -1198,6 +1359,155 @@ }; }; + isi { + pinctrl_isi_data_0_7: isi-0-data-0-7 { + atmel,pins = + ; /* ISI_HSYNC */ + }; + pinctrl_isi_data_8_9: isi-0-data-8-9 { + atmel,pins = + ; /* ISI_D9, conflicts with SPI0_MOSI, PWML2 */ + }; + pinctrl_isi_data_10_11: isi-0-data-10-11 { + atmel,pins = + ; /* ISI_D11, conflicts with SPI0_NPCS0, PWML3 */ + }; + }; + + lcd { + pinctrl_lcd_base: lcd-base-0 { + atmel,pins = + ; /* LCDPCK */ + }; + pinctrl_lcd_pwm: lcd-pwm-0 { + atmel,pins = ; /* LCDPWM */ + }; + pinctrl_lcd_rgb444: lcd-rgb-0 { + atmel,pins = + ; /* LCDD11 pin */ + }; + pinctrl_lcd_rgb565: lcd-rgb-1 { + atmel,pins = + ; /* LCDD15 pin */ + }; + pinctrl_lcd_rgb666: lcd-rgb-2 { + atmel,pins = + ; /* LCDD23 pin */ + }; + pinctrl_lcd_rgb777: lcd-rgb-3 { + atmel,pins = + /* LCDDAT0 conflicts with TMS */ + ; /* LCDD23 pin */ + }; + pinctrl_lcd_rgb888: lcd-rgb-4 { + atmel,pins = + ; /* LCDD23 pin */ + }; + }; + macb0 { pinctrl_macb0_rmii: macb0_rmii-0 { atmel,pins = @@ -1281,6 +1591,38 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx { + atmel,pins = + ; /* TD0 */ + }; + + pinctrl_ssc0_rx: ssc0_rx { + atmel,pins = + ; /* RD0 */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx { + atmel,pins = + ; /* TD1 */ + }; + + pinctrl_ssc1_rx: ssc1_rx { + atmel,pins = + ; /* RD1 */ + }; + }; + usart2 { pinctrl_usart2: usart2-0 { atmel,pins = diff --git a/arch/arm/boot/dts/sh7372-mackerel.dts b/arch/arm/boot/dts/sh7372-mackerel.dts deleted file mode 100644 index a759a276c9a972d4174e519240e4f9ed7d720fd0..0000000000000000000000000000000000000000 --- a/arch/arm/boot/dts/sh7372-mackerel.dts +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Device Tree Source for the mackerel board - * - * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -#include "sh7372.dtsi" - -/ { - model = "Mackerel (AP4 EVM 2nd)"; - compatible = "renesas,mackerel"; - - chosen { - bootargs = "console=tty0, console=ttySC0,115200 earlyprintk=sh-sci.0,115200 root=/dev/nfs nfsroot=,tcp,v3 ip=dhcp mem=240m rw"; - }; - - memory { - device_type = "memory"; - reg = <0x40000000 0x10000000>; - }; -}; diff --git a/arch/arm/boot/dts/sh7372.dtsi b/arch/arm/boot/dts/sh7372.dtsi deleted file mode 100644 index f863a10cb1b2d4b7050a942af90478d432b85ecd..0000000000000000000000000000000000000000 --- a/arch/arm/boot/dts/sh7372.dtsi +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Device Tree Source for the sh7372 SoC - * - * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/include/ "skeleton.dtsi" - -/ { - compatible = "renesas,sh7372"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a8"; - device_type = "cpu"; - reg = <0x0>; - clock-frequency = <800000000>; - }; - }; - - pfc: pfc@e6050000 { - compatible = "renesas,pfc-sh7372"; - reg = <0xe6050000 0x8000>, - <0xe605801c 0x1c>; - gpio-controller; - #gpio-cells = <2>; - }; -}; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts deleted file mode 100644 index 6d32c87632d42fda072304bdc7fd366491dcbda9..0000000000000000000000000000000000000000 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ /dev/null @@ -1,366 +0,0 @@ -/* - * Device Tree Source for the KZM-A9-GT board - * - * Copyright (C) 2012 Horms Solutions Ltd. - * - * Based on sh73a0-kzm9g.dts - * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -#include "sh73a0.dtsi" -#include -#include -#include - -/ { - model = "KZM-A9-GT"; - compatible = "renesas,kzm9g-reference", "renesas,sh73a0"; - - aliases { - serial4 = &scifa4; - }; - - cpus { - cpu@0 { - cpu0-supply = <&vdd_dvfs>; - operating-points = < - /* kHz uV */ - 1196000 1315000 - 598000 1175000 - 398667 1065000 - >; - voltage-tolerance = <1>; /* 1% */ - }; - }; - - chosen { - bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw"; - stdout-path = &scifa4; - }; - - memory { - device_type = "memory"; - reg = <0x41000000 0x1e800000>; - }; - - reg_1p8v: regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - reg_3p3v: regulator@1 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - vmmc_sdhi0: regulator@2 { - compatible = "regulator-fixed"; - regulator-name = "SDHI0 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&pfc 15 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vmmc_sdhi2: regulator@3 { - compatible = "regulator-fixed"; - regulator-name = "SDHI2 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&pfc 14 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - lan9220@10000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0x10000000 0x100>; - phy-mode = "mii"; - interrupt-parent = <&irqpin0>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - reg-io-width = <4>; - smsc,irq-push-pull; - smsc,save-mac-address; - vddvario-supply = <®_1p8v>; - vdd33a-supply = <®_3p3v>; - }; - - leds { - compatible = "gpio-leds"; - led1 { - gpios = <&pfc 20 GPIO_ACTIVE_LOW>; - label = "LED1"; - }; - led2 { - gpios = <&pfc 21 GPIO_ACTIVE_LOW>; - label = "LED2"; - }; - led3 { - gpios = <&pfc 22 GPIO_ACTIVE_LOW>; - label = "LED3"; - }; - led4 { - gpios = <&pfc 23 GPIO_ACTIVE_LOW>; - label = "LED4"; - }; - }; - - keyboard { - compatible = "gpio-keys"; - - back-key { - gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW3"; - }; - - right-key { - gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW2-R"; - }; - - left-key { - gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW2-L"; - }; - - enter-key { - gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW2-P"; - }; - - up-key { - gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW2-U"; - }; - - down-key { - gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW2-D"; - }; - - home-key { - gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW1"; - }; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "left_j"; - simple-audio-card,cpu { - sound-dai = <&sh_fsi2 0>; - }; - simple-audio-card,codec { - sound-dai = <&ak4648>; - bitclock-master; - frame-master; - system-clock-frequency = <11289600>; - }; - }; -}; - -&cmt1 { - status = "okay"; -}; - -&extal2_clk { - clock-frequency = <48000000>; -}; - -&i2c0 { - status = "okay"; - as3711@40 { - compatible = "ams,as3711"; - reg = <0x40>; - - regulators { - vdd_dvfs: sd1 { - regulator-name = "1.315V CPU"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - sd2 { - regulator-name = "1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - sd4 { - regulator-name = "1.215V"; - regulator-min-microvolt = <1215000>; - regulator-max-microvolt = <1235000>; - regulator-always-on; - regulator-boot-on; - }; - ldo2 { - regulator-name = "2.8V CPU"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - }; - ldo3 { - regulator-name = "3.0V CPU"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - }; - ldo4 { - regulator-name = "2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - }; - ldo5 { - regulator-name = "2.8V #2"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - }; - ldo7 { - regulator-name = "1.15V CPU"; - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - regulator-always-on; - regulator-boot-on; - }; - ldo8 { - regulator-name = "1.15V CPU #2"; - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - regulator-always-on; - regulator-boot-on; - }; - }; - }; - - ak4648: ak4648@12 { - #sound-dai-cells = <0>; - compatible = "asahi-kasei,ak4648"; - reg = <0x12>; - }; -}; - -&i2c3 { - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; - status = "okay"; - - pcf8575: gpio@20 { - compatible = "nxp,pcf8575"; - reg = <0x20>; - interrupt-parent = <&irqpin2>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; -}; - -&mmcif { - pinctrl-0 = <&mmcif_pins>; - pinctrl-names = "default"; - - bus-width = <8>; - vmmc-supply = <®_1p8v>; - status = "okay"; -}; - -&pfc { - i2c3_pins: i2c3 { - renesas,groups = "i2c3_1"; - renesas,function = "i2c3"; - }; - - mmcif_pins: mmc { - mux { - renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0"; - renesas,function = "mmc0"; - }; - cfg { - renesas,groups = "mmc0_data8_0"; - renesas,pins = "PORT279"; - bias-pull-up; - }; - }; - - scifa4_pins: serial4 { - renesas,groups = "scifa4_data", "scifa4_ctrl"; - renesas,function = "scifa4"; - }; - - sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp"; - renesas,function = "sdhi0"; - }; - - sdhi2_pins: sd2 { - renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; - renesas,function = "sdhi2"; - }; - - fsia_pins: sounda { - renesas,groups = "fsia_mclk_in", "fsia_sclk_in", - "fsia_data_in", "fsia_data_out"; - renesas,function = "fsia"; - }; -}; - -&scifa4 { - pinctrl-0 = <&scifa4_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&vmmc_sdhi0>; - bus-width = <4>; - status = "okay"; -}; - -&sdhi2 { - pinctrl-0 = <&sdhi2_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&vmmc_sdhi2>; - bus-width = <4>; - broken-cd; - status = "okay"; -}; - -&sh_fsi2 { - pinctrl-0 = <&fsia_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index 27c5f426d172f03d53801875ec5a5293c4f45b88..022ba505f57339a959d8208732eeb75e585911d4 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -1,6 +1,9 @@ /* * Device Tree Source for the KZM-A9-GT board * + * Copyright (C) 2012 Horms Solutions Ltd. + * + * Based on sh73a0-kzm9g.dts * Copyright (C) 2012 Renesas Solutions Corp. * * This file is licensed under the terms of the GNU General Public License @@ -10,17 +13,388 @@ /dts-v1/; #include "sh73a0.dtsi" +#include +#include +#include / { model = "KZM-A9-GT"; compatible = "renesas,kzm9g", "renesas,sh73a0"; + aliases { + serial4 = &scifa4; + }; + + cpus { + cpu@0 { + cpu0-supply = <&vdd_dvfs>; + operating-points = < + /* kHz uV */ + 1196000 1315000 + 598000 1175000 + 398667 1065000 + >; + voltage-tolerance = <1>; /* 1% */ + }; + }; + chosen { - bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200 rw"; + bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw"; + stdout-path = &scifa4; }; memory { device_type = "memory"; - reg = <0x41000000 0x1e800000>; + reg = <0x40000000 0x20000000>; + }; + + reg_1p8v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vmmc_sdhi0: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pfc 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vmmc_sdhi2: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "SDHI2 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pfc 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + leds { + compatible = "gpio-leds"; + led1 { + gpios = <&pfc 20 GPIO_ACTIVE_LOW>; + label = "LED1"; + }; + led2 { + gpios = <&pfc 21 GPIO_ACTIVE_LOW>; + label = "LED2"; + }; + led3 { + gpios = <&pfc 22 GPIO_ACTIVE_LOW>; + label = "LED3"; + }; + led4 { + gpios = <&pfc 23 GPIO_ACTIVE_LOW>; + label = "LED4"; + }; + }; + + keyboard { + compatible = "gpio-keys"; + + back-key { + gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW3"; + }; + + right-key { + gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW2-R"; + }; + + left-key { + gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW2-L"; + }; + + enter-key { + gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW2-P"; + }; + + up-key { + gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW2-U"; + }; + + down-key { + gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW2-D"; + }; + + home-key { + gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW1"; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "left_j"; + simple-audio-card,cpu { + sound-dai = <&sh_fsi2 0>; + }; + simple-audio-card,codec { + sound-dai = <&ak4648>; + bitclock-master; + frame-master; + system-clock-frequency = <11289600>; + }; + }; +}; + +&bsc { + ethernet@10000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x10000000 0x100>; + phy-mode = "mii"; + interrupt-parent = <&irqpin0>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + reg-io-width = <4>; + smsc,irq-push-pull; + smsc,save-mac-address; + vddvario-supply = <®_1p8v>; + vdd33a-supply = <®_3p3v>; + }; +}; + +&cmt1 { + status = "okay"; +}; + +&extal2_clk { + clock-frequency = <48000000>; +}; + +&i2c0 { + status = "okay"; + + compass@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + interrupt-parent = <&irqpin3>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + }; + + ak4648: codec@12 { + compatible = "asahi-kasei,ak4648"; + reg = <0x12>; + #sound-dai-cells = <0>; + }; + + accelerometer@1d { + compatible = "adi,adxl34x"; + reg = <0x1d>; + interrupt-parent = <&irqpin3>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>, + <3 IRQ_TYPE_LEVEL_HIGH>; }; + + rtc@32 { + compatible = "ricoh,r2025sd"; + reg = <0x32>; + }; + + as3711@40 { + compatible = "ams,as3711"; + reg = <0x40>; + + regulators { + vdd_dvfs: sd1 { + regulator-name = "1.315V CPU"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + sd2 { + regulator-name = "1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + sd4 { + regulator-name = "1.215V"; + regulator-min-microvolt = <1215000>; + regulator-max-microvolt = <1235000>; + regulator-always-on; + regulator-boot-on; + }; + ldo2 { + regulator-name = "2.8V CPU"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + ldo3 { + regulator-name = "3.0V CPU"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + ldo4 { + regulator-name = "2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + ldo5 { + regulator-name = "2.8V #2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + ldo7 { + regulator-name = "1.15V CPU"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + }; + ldo8 { + regulator-name = "1.15V CPU #2"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + + touchscreen@55 { + compatible = "sitronix,st1232"; + reg = <0x55>; + interrupt-parent = <&irqpin1>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + status = "okay"; + + pcf8575: gpio@20 { + compatible = "nxp,pcf8575"; + reg = <0x20>; + interrupt-parent = <&irqpin2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&mmcif { + pinctrl-0 = <&mmcif_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + vmmc-supply = <®_1p8v>; + status = "okay"; +}; + +&pfc { + i2c3_pins: i2c3 { + renesas,groups = "i2c3_1"; + renesas,function = "i2c3"; + }; + + mmcif_pins: mmc { + mux { + renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0"; + renesas,function = "mmc0"; + }; + cfg { + renesas,groups = "mmc0_data8_0"; + renesas,pins = "PORT279"; + bias-pull-up; + }; + }; + + scifa4_pins: serial4 { + renesas,groups = "scifa4_data", "scifa4_ctrl"; + renesas,function = "scifa4"; + }; + + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp"; + renesas,function = "sdhi0"; + }; + + sdhi2_pins: sd2 { + renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; + renesas,function = "sdhi2"; + }; + + fsia_pins: sounda { + renesas,groups = "fsia_mclk_in", "fsia_sclk_in", + "fsia_data_in", "fsia_data_out"; + renesas,function = "fsia"; + }; +}; + +&scifa4 { + pinctrl-0 = <&scifa4_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vmmc_sdhi0>; + bus-width = <4>; + status = "okay"; +}; + +&sdhi2 { + pinctrl-0 = <&sdhi2_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vmmc_sdhi2>; + bus-width = <4>; + broken-cd; + status = "okay"; +}; + +&sh_fsi2 { + pinctrl-0 = <&fsia_pins>; + pinctrl-names = "default"; + + status = "okay"; }; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 2dfd5b44255de147e11f2c36c2b9cc5f7e9f3793..45b539ce4d3520356d45470f3bdfeb5f8020ce30 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -11,6 +11,7 @@ /include/ "skeleton.dtsi" #include +#include #include / { @@ -26,15 +27,24 @@ compatible = "arm,cortex-a9"; reg = <0>; clock-frequency = <1196000000>; + power-domains = <&pd_a2sl>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; clock-frequency = <1196000000>; + power-domains = <&pd_a2sl>; }; }; + timer@f0000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xf0000600 0x20>; + interrupts = ; + clocks = <&twd_clk>; + }; + gic: interrupt-controller@f0001000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -49,6 +59,7 @@ interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>, <0 38 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "sec", "temp"; + power-domains = <&pd_a4bc1>; }; sbsc1: memory-controller@fe400000 { @@ -57,6 +68,7 @@ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>, <0 36 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "sec", "temp"; + power-domains = <&pd_a4bc0>; }; pmu { @@ -69,11 +81,12 @@ compatible = "renesas,cmt-48-sh73a0", "renesas,cmt-48"; reg = <0xe6138000 0x200>; interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks SH73A0_CLK_CMT1>; + clock-names = "fck"; + power-domains = <&pd_c5>; renesas,channels-mask = <0x3f>; - clocks = <&mstp3_clks SH73A0_CLK_CMT1>; - clock-names = "fck"; status = "disabled"; }; @@ -94,6 +107,9 @@ 0 6 IRQ_TYPE_LEVEL_HIGH 0 7 IRQ_TYPE_LEVEL_HIGH 0 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; + power-domains = <&pd_a4s>; + control-parent; }; irqpin1: irqpin@e6900004 { @@ -113,6 +129,8 @@ 0 14 IRQ_TYPE_LEVEL_HIGH 0 15 IRQ_TYPE_LEVEL_HIGH 0 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; + power-domains = <&pd_a4s>; control-parent; }; @@ -133,6 +151,9 @@ 0 22 IRQ_TYPE_LEVEL_HIGH 0 23 IRQ_TYPE_LEVEL_HIGH 0 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; + power-domains = <&pd_a4s>; + control-parent; }; irqpin3: irqpin@e690000c { @@ -152,6 +173,9 @@ 0 30 IRQ_TYPE_LEVEL_HIGH 0 31 IRQ_TYPE_LEVEL_HIGH 0 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; + power-domains = <&pd_a4s>; + control-parent; }; i2c0: i2c@e6820000 { @@ -164,6 +188,7 @@ 0 169 IRQ_TYPE_LEVEL_HIGH 0 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks SH73A0_CLK_IIC0>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -177,6 +202,7 @@ 0 53 IRQ_TYPE_LEVEL_HIGH 0 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_IIC1>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -190,6 +216,7 @@ 0 173 IRQ_TYPE_LEVEL_HIGH 0 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks SH73A0_CLK_IIC2>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -203,6 +230,7 @@ 0 185 IRQ_TYPE_LEVEL_HIGH 0 186 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks SH73A0_CLK_IIC3>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -216,6 +244,7 @@ 0 189 IRQ_TYPE_LEVEL_HIGH 0 190 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks SH73A0_CLK_IIC4>; + power-domains = <&pd_c5>; status = "disabled"; }; @@ -225,6 +254,7 @@ interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH 0 141 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_MMCIF0>; + power-domains = <&pd_a3sp>; reg-io-width = <4>; status = "disabled"; }; @@ -236,6 +266,7 @@ 0 84 IRQ_TYPE_LEVEL_HIGH 0 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SDHI0>; + power-domains = <&pd_a3sp>; cap-sd-highspeed; status = "disabled"; }; @@ -247,6 +278,7 @@ interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH 0 89 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SDHI1>; + power-domains = <&pd_a3sp>; toshiba,mmc-wrprotect-disable; cap-sd-highspeed; status = "disabled"; @@ -258,6 +290,7 @@ interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH 0 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SDHI2>; + power-domains = <&pd_a3sp>; toshiba,mmc-wrprotect-disable; cap-sd-highspeed; status = "disabled"; @@ -269,6 +302,7 @@ interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA0>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -278,6 +312,7 @@ interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA1>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -287,6 +322,7 @@ interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA2>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -296,6 +332,7 @@ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA3>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -305,6 +342,7 @@ interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -314,6 +352,7 @@ interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA5>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -323,6 +362,7 @@ interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SCIFA6>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -332,6 +372,7 @@ interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA7>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -341,6 +382,7 @@ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFB>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -359,6 +401,117 @@ <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>, <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>, <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>; + power-domains = <&pd_c5>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,sysc-sh73a0", "renesas,sysc-rmobile"; + reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>; + + pm-domains { + pd_c5: c5 { + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_c4: c4@0 { + reg = <0>; + #power-domain-cells = <0>; + }; + + pd_d4: d4@1 { + reg = <1>; + #power-domain-cells = <0>; + }; + + pd_a4bc0: a4bc0@4 { + reg = <4>; + #power-domain-cells = <0>; + }; + + pd_a4bc1: a4bc1@5 { + reg = <5>; + #power-domain-cells = <0>; + }; + + pd_a4lc0: a4lc0@6 { + reg = <6>; + #power-domain-cells = <0>; + }; + + pd_a4lc1: a4lc1@7 { + reg = <7>; + #power-domain-cells = <0>; + }; + + pd_a4mp: a4mp@8 { + reg = <8>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a3mp: a3mp@9 { + reg = <9>; + #power-domain-cells = <0>; + }; + + pd_a3vc: a3vc@10 { + reg = <10>; + #power-domain-cells = <0>; + }; + }; + + pd_a4rm: a4rm@12 { + reg = <12>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a3r: a3r@13 { + reg = <13>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a2rv: a2rv@14 { + reg = <14>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + }; + }; + }; + + pd_a4s: a4s@16 { + reg = <16>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a3sp: a3sp@17 { + reg = <17>; + #power-domain-cells = <0>; + }; + + pd_a3sg: a3sg@18 { + reg = <18>; + #power-domain-cells = <0>; + }; + + pd_a3sm: a3sm@19 { + reg = <19>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a2sl: a2sl@20 { + reg = <20>; + #power-domain-cells = <0>; + }; + }; + }; + }; + }; }; sh_fsi2: sound@ec230000 { @@ -366,9 +519,22 @@ compatible = "renesas,fsi2-sh73a0", "renesas,sh_fsi2"; reg = <0xec230000 0x400>; interrupts = <0 146 0x4>; + power-domains = <&pd_a4mp>; status = "disabled"; }; + bsc: bus@fec10000 { + compatible = "renesas,bsc-sh73a0", "renesas,bsc", + "simple-pm-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x20000000>; + reg = <0xfec10000 0x400>; + interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&zb_clk>; + power-domains = <&pd_a4s>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; @@ -426,133 +592,159 @@ vclk1_clk: vclk1_clk@e6150008 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150008 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&extcki_clk>, <&extal2_clk>, <&main_div2_clk>, + <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>, + <0>; #clock-cells = <0>; clock-output-names = "vclk1"; }; vclk2_clk: vclk2_clk@e615000c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615000c 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&extcki_clk>, <&extal2_clk>, <&main_div2_clk>, + <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>, + <0>; #clock-cells = <0>; clock-output-names = "vclk2"; }; vclk3_clk: vclk3_clk@e615001c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615001c 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&extcki_clk>, <&extal2_clk>, <&main_div2_clk>, + <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>, + <0>; #clock-cells = <0>; clock-output-names = "vclk3"; }; zb_clk: zb_clk@e6150010 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150010 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <0>, + <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; clock-output-names = "zb"; }; flctl_clk: flctl_clk@e6150014 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150014 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <0>, + <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; clock-output-names = "flctlck"; }; sdhi0_clk: sdhi0_clk@e6150074 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150074 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&pll1_div13_clk>, <0>; #clock-cells = <0>; clock-output-names = "sdhi0ck"; }; sdhi1_clk: sdhi1_clk@e6150078 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150078 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&pll1_div13_clk>, <0>; #clock-cells = <0>; clock-output-names = "sdhi1ck"; }; sdhi2_clk: sdhi2_clk@e615007c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615007c 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&pll1_div13_clk>, <0>; #clock-cells = <0>; clock-output-names = "sdhi2ck"; }; fsia_clk: fsia_clk@e6150018 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150018 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&fsiack_clk>, <&fsiack_clk>; #clock-cells = <0>; clock-output-names = "fsia"; }; fsib_clk: fsib_clk@e6150090 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150090 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&fsibck_clk>, <&fsibck_clk>; #clock-cells = <0>; clock-output-names = "fsib"; }; sub_clk: sub_clk@e6150080 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150080 4>; - clocks = <&extal2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&extal2_clk>, <&extal2_clk>; #clock-cells = <0>; clock-output-names = "sub"; }; spua_clk: spua_clk@e6150084 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150084 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&extal2_clk>, <&extal2_clk>; #clock-cells = <0>; clock-output-names = "spua"; }; spuv_clk: spuv_clk@e6150094 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150094 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&extal2_clk>, <&extal2_clk>; #clock-cells = <0>; clock-output-names = "spuv"; }; msu_clk: msu_clk@e6150088 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150088 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <0>, + <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; clock-output-names = "msu"; }; hsi_clk: hsi_clk@e615008c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615008c 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&pll1_div7_clk>, <0>; #clock-cells = <0>; clock-output-names = "hsi"; }; mfg1_clk: mfg1_clk@e6150098 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150098 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <0>, + <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; clock-output-names = "mfg1"; }; mfg2_clk: mfg2_clk@e615009c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615009c 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <0>, + <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; clock-output-names = "mfg2"; }; dsit_clk: dsit_clk@e6150060 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150060 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <0>, + <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; clock-output-names = "dsit"; }; dsi0p_clk: dsi0p_clk@e6150064 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150064 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&cpg_clocks SH73A0_CLK_MAIN>, <&extal2_clk>, + <&extcki_clk>, <0>, <0>, <0>; #clock-cells = <0>; clock-output-names = "dsi0pck"; }; @@ -695,5 +887,16 @@ clock-output-names = "iic3", "iic4", "keysc"; }; + mstp5_clks: mstp5_clks@e6150144 { + compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xe6150144 4>, <0xe615003c 4>; + clocks = <&cpg_clocks SH73A0_CLK_HP>; + #clock-cells = <1>; + clock-indices = < + SH73A0_CLK_INTCA0 + >; + clock-output-names = + "intca0"; + }; }; }; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index bfd3f1c734b8d84dec4a622032e1b29efa07b83d..2201cd5da3bb95843278b27c8f855d540d154041 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -1017,23 +1017,6 @@ status = "disabled"; }; - vmmci: regulator-gpio { - compatible = "regulator-gpio"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2900000>; - regulator-name = "mmci-reg"; - regulator-type = "voltage"; - - startup-delay-us = <100>; - enable-active-high; - - states = <1800000 0x1 - 2900000 0x0>; - - status = "disabled"; - }; - mcde@a0350000 { compatible = "stericsson,mcde"; reg = <0xa0350000 0x1000>, /* MCDE */ diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index bf8f0eddc2c020d03dda99adfdc32d453e254c14..744c1e3a744df1530ba53cd2a56029a9e9ac5d37 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -111,6 +111,21 @@ pinctrl-1 = <&i2c3_sleep_mode>; }; + vmmci: regulator-gpio { + compatible = "regulator-gpio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + startup-delay-us = <100>; + enable-active-high; + + states = <1800000 0x1 + 2900000 0x0>; + }; + // External Micro SD slot sdi0_per1@80126000 { arm,primecell-periphid = <0x10480180>; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 206826a855c0dc0e5025539e5a8930405c8cdd56..1bc84ebdccaa2fe119ebb9e542f88b64f017cea9 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -146,8 +146,21 @@ }; vmmci: regulator-gpio { + compatible = "regulator-gpio"; + gpios = <&gpio7 4 0x4>; enable-gpio = <&gpio6 25 0x4>; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + startup-delay-us = <100>; + enable-active-high; + + states = <1800000 0x1 + 2900000 0x0>; }; // External Micro SD slot diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..2c5cede686dc57d883542f1ab44a1f95b6cc834c --- /dev/null +++ b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi @@ -0,0 +1,2421 @@ +/ { + clock@0,60006000 { + emc-timings-3 { + nvidia,ram-code = <3>; + + timing-12750000 { + clock-frequency = <12750000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-20400000 { + clock-frequency = <20400000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-40800000 { + clock-frequency = <40800000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-68000000 { + clock-frequency = <68000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-300000000 { + clock-frequency = <300000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C>; + clock-names = "emc-parent"; + }; + timing-396000000 { + clock-frequency = <396000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M>; + clock-names = "emc-parent"; + }; + timing-528000000 { + clock-frequency = <528000000>; + nvidia,parent-clock-frequency = <528000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + timing-600000000 { + clock-frequency = <600000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>; + clock-names = "emc-parent"; + }; + timing-792000000 { + clock-frequency = <792000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + timing-924000000 { + clock-frequency = <924000000>; + nvidia,parent-clock-frequency = <924000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + }; + }; + + emc@0,7001b000 { + emc-timings-3 { + nvidia,ram-code = <3>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000005 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000060 + 0x00000000 + 0x00000018 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000007 + 0x0000000f + 0x00000005 + 0x00000005 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000064 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000e0e + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000007 + 0x00000000 + 0x00000042 + 0x000e000e + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x800001c5 + 0x0000000a + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 + 0x00000005 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000005 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x0000009a + 0x00000000 + 0x00000026 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000007 + 0x0000000f + 0x00000006 + 0x00000006 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000005 + 0x00000005 + 0x000000a0 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000e0e + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x0000000b + 0x00000000 + 0x00000042 + 0x000e000e + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x8000023a + 0x0000000a + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000001 + 0x0000000a + 0x00000000 + 0x00000001 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000005 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000134 + 0x00000000 + 0x0000004d + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000008 + 0x0000000f + 0x0000000c + 0x0000000c + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000005 + 0x00000005 + 0x0000013f + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000e0e + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000015 + 0x00000000 + 0x00000042 + 0x000e000e + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x80000370 + 0x0000000a + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000003 + 0x00000011 + 0x00000000 + 0x00000002 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000005 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000202 + 0x00000000 + 0x00000080 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x0000000f + 0x0000000f + 0x00000013 + 0x00000013 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000001 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000213 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000e0e + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000022 + 0x00000000 + 0x00000042 + 0x000e000e + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x8000050e + 0x0000000a + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000004 + 0x0000001a + 0x00000000 + 0x00000003 + 0x00000001 + 0x00000004 + 0x0000000a + 0x00000005 + 0x0000000b + 0x00000001 + 0x00000001 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000304 + 0x00000000 + 0x000000c1 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000018 + 0x0000000f + 0x0000001c + 0x0000001c + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x0000031c + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000e0e + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000033 + 0x00000000 + 0x00000042 + 0x000e000e + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x80000713 + 0x0000000a + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008cd>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000009 + 0x00000035 + 0x00000000 + 0x00000006 + 0x00000002 + 0x00000005 + 0x0000000a + 0x00000005 + 0x0000000b + 0x00000002 + 0x00000002 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000004 + 0x00000006 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000003 + 0x0000000d + 0x0000000f + 0x00000011 + 0x00000607 + 0x00000000 + 0x00000181 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000032 + 0x0000000f + 0x00000038 + 0x00000038 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000006 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000638 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00008000 + 0x00000000 + 0x00000000 + 0x00008000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00090000 + 0x00090000 + 0x00090000 + 0x00090000 + 0x00009000 + 0x00009000 + 0x00009000 + 0x00009000 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000707 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000066 + 0x00000000 + 0x00000100 + 0x000e000e + 0x00000000 + 0x00000003 + 0x0000d2b3 + 0x80000d22 + 0x0000000a + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x000008d5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000321>; + nvidia,emc-mrs-wait-cnt = <0x0173000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000000d + 0x0000004d + 0x00000000 + 0x00000009 + 0x00000003 + 0x00000004 + 0x00000008 + 0x00000002 + 0x00000009 + 0x00000003 + 0x00000003 + 0x00000002 + 0x00000002 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000005 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000007 + 0x00020000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000001 + 0x0000000e + 0x00000010 + 0x00000012 + 0x000008e4 + 0x00000000 + 0x00000239 + 0x00000001 + 0x00000008 + 0x00000001 + 0x00000000 + 0x0000004b + 0x0000000e + 0x00000052 + 0x00000200 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000008 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000924 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0x002c00a0 + 0x00008000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00098000 + 0x00098000 + 0x00000000 + 0x00098000 + 0x00098000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00050000 + 0x00050000 + 0x00050000 + 0x00050000 + 0x00005000 + 0x00005000 + 0x00005000 + 0x00005000 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000505 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x51451420 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000096 + 0x00000000 + 0x00000100 + 0x0173000e + 0x00000000 + 0x00000003 + 0x000052a3 + 0x800012d7 + 0x00000009 + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x00000895>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000521>; + nvidia,emc-mrs-wait-cnt = <0x015b000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000011 + 0x00000066 + 0x00000000 + 0x0000000c + 0x00000004 + 0x00000004 + 0x00000008 + 0x00000002 + 0x0000000a + 0x00000004 + 0x00000004 + 0x00000002 + 0x00000002 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000005 + 0x00000002 + 0x00000000 + 0x00000001 + 0x00000008 + 0x00020000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000000f + 0x00000010 + 0x00000012 + 0x00000bd1 + 0x00000000 + 0x000002f4 + 0x00000001 + 0x00000008 + 0x00000001 + 0x00000000 + 0x00000063 + 0x0000000f + 0x0000006c + 0x00000200 + 0x00000004 + 0x00000005 + 0x00000004 + 0x0000000b + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000c11 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0x002c00a0 + 0x00008000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00070000 + 0x00070000 + 0x00000000 + 0x00070000 + 0x00070000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00038000 + 0x00038000 + 0x00038000 + 0x00038000 + 0x00003800 + 0x00003800 + 0x00003800 + 0x00003800 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000505 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x51451420 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x000000c6 + 0x00000000 + 0x00000100 + 0x015b000e + 0x00000000 + 0x00000003 + 0x000052a3 + 0x8000188b + 0x00000009 + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000941>; + nvidia,emc-mrs-wait-cnt = <0x0139000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0123133d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000018 + 0x00000088 + 0x00000000 + 0x00000010 + 0x00000006 + 0x00000006 + 0x00000009 + 0x00000002 + 0x0000000d + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000002 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000001 + 0x00000009 + 0x00030000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000010 + 0x00000012 + 0x00000014 + 0x00000fd6 + 0x00000000 + 0x000003f5 + 0x00000002 + 0x0000000b + 0x00000001 + 0x00000000 + 0x00000085 + 0x00000012 + 0x00000090 + 0x00000200 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000010 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00001017 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0xe01200b1 + 0x00008000 + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00054000 + 0x00054000 + 0x00000000 + 0x00054000 + 0x00054000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000000c + 0x0000000c + 0x0000000c + 0x0000000c + 0x0000000c + 0x0000000c + 0x0000000c + 0x0000000c + 0x100002a0 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc085 + 0x00000505 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x51451420 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0606003f + 0x00000000 + 0x00000000 + 0x00000100 + 0x0139000e + 0x00000000 + 0x00000003 + 0x000042a0 + 0x80002062 + 0x0000000a + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200010>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000b61>; + nvidia,emc-mrs-wait-cnt = <0x0127000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0121113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000001b + 0x0000009b + 0x00000000 + 0x00000013 + 0x00000007 + 0x00000007 + 0x0000000b + 0x00000003 + 0x00000010 + 0x00000007 + 0x00000007 + 0x00000002 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x0000000a + 0x00000002 + 0x00000000 + 0x00000003 + 0x0000000b + 0x00070000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000002 + 0x00000012 + 0x00000016 + 0x00000018 + 0x00001208 + 0x00000000 + 0x00000482 + 0x00000002 + 0x0000000d + 0x00000001 + 0x00000000 + 0x00000097 + 0x00000015 + 0x000000a3 + 0x00000200 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000013 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00001248 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0xe00e00b1 + 0x00008000 + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00048000 + 0x00048000 + 0x00000000 + 0x00048000 + 0x00048000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000000d + 0x0000000d + 0x0000000d + 0x0000000d + 0x0000000d + 0x0000000d + 0x0000000d + 0x0000000d + 0x100002a0 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc085 + 0x00000505 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x51451420 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0606003f + 0x00000000 + 0x00000000 + 0x00000100 + 0x0127000e + 0x00000000 + 0x00000003 + 0x000040a0 + 0x800024aa + 0x0000000e + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200018>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000d71>; + nvidia,emc-mrs-wait-cnt = <0x00f7000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040000>; + nvidia,emc-xm2dqspadctrl2 = <0x0120113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000024 + 0x000000cd + 0x00000000 + 0x00000019 + 0x0000000a + 0x00000008 + 0x0000000d + 0x00000004 + 0x00000013 + 0x0000000a + 0x0000000a + 0x00000004 + 0x00000002 + 0x00000000 + 0x00000006 + 0x00000006 + 0x0000000b + 0x00000002 + 0x00000000 + 0x00000002 + 0x0000000d + 0x00080000 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000001 + 0x00000014 + 0x00000018 + 0x0000001a + 0x000017e2 + 0x00000000 + 0x000005f8 + 0x00000003 + 0x00000011 + 0x00000001 + 0x00000000 + 0x000000c7 + 0x00000018 + 0x000000d7 + 0x00000200 + 0x00000005 + 0x00000006 + 0x00000005 + 0x00000019 + 0x00000000 + 0x00000008 + 0x00000008 + 0x00001822 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0xe00700b1 + 0x00008000 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00034000 + 0x00034000 + 0x00000000 + 0x00034000 + 0x00034000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x100002a0 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc085 + 0x00000000 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x61861820 + 0x00514514 + 0x00514514 + 0x61861800 + 0x0606003f + 0x00000000 + 0x00000000 + 0x00000100 + 0x00f7000e + 0x00000000 + 0x00000004 + 0x00004080 + 0x80003012 + 0x0000000f + >; + }; + + timing-924000000 { + clock-frequency = <924000000>; + + nvidia,emc-auto-cal-config = <0xa1430303>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200020>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000f15>; + nvidia,emc-mrs-wait-cnt = <0x00cd000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040000>; + nvidia,emc-xm2dqspadctrl2 = <0x0120113d>; + nvidia,emc-zcal-cnt-long = <0x0000004c>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000002b + 0x000000f0 + 0x00000000 + 0x0000001e + 0x0000000b + 0x00000009 + 0x0000000f + 0x00000005 + 0x00000016 + 0x0000000b + 0x0000000b + 0x00000004 + 0x00000002 + 0x00000000 + 0x00000007 + 0x00000007 + 0x0000000d + 0x00000002 + 0x00000000 + 0x00000002 + 0x0000000f + 0x000a0000 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000001 + 0x00000016 + 0x0000001a + 0x0000001c + 0x00001be7 + 0x00000000 + 0x000006f9 + 0x00000004 + 0x00000015 + 0x00000001 + 0x00000000 + 0x000000e7 + 0x0000001b + 0x000000fb + 0x00000200 + 0x00000006 + 0x00000007 + 0x00000006 + 0x0000001e + 0x00000000 + 0x0000000a + 0x0000000a + 0x00001c28 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab898 + 0xe00400b1 + 0x00008000 + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0002c000 + 0x0002c000 + 0x00000000 + 0x0002c000 + 0x0002c000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x100002a0 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc085 + 0x00000000 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x5d75d720 + 0x00514514 + 0x00514514 + 0x5d75d700 + 0x0606003f + 0x00000000 + 0x00000000 + 0x00000128 + 0x00cd000e + 0x00000000 + 0x00000004 + 0x00004080 + 0x800037ea + 0x00000011 + >; + }; + + }; + }; + + memory-controller@0,70019000 { + emc-timings-3 { + nvidia,ram-code = <3>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emem-configuration = < + 0x40040001 + 0x8000000a + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000003 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0502 + 0x77e30303 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emem-configuration = < + 0x40020001 + 0x80000012 + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000003 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0502 + 0x76230303 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emem-configuration = < + 0xa0000001 + 0x80000017 + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000003 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0502 + 0x74a30303 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emem-configuration = < + 0x00000001 + 0x8000001e + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000003 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0502 + 0x74230403 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emem-configuration = < + 0x08000001 + 0x80000026 + 0x00000001 + 0x00000001 + 0x00000003 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000003 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0503 + 0x73c30504 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emem-configuration = < + 0x01000003 + 0x80000040 + 0x00000001 + 0x00000001 + 0x00000004 + 0x00000002 + 0x00000003 + 0x00000001 + 0x00000003 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000004 + 0x00000006 + 0x06040203 + 0x000a0504 + 0x73840a05 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emem-configuration = < + 0x08000004 + 0x80000040 + 0x00000001 + 0x00000002 + 0x00000007 + 0x00000004 + 0x00000004 + 0x00000001 + 0x00000002 + 0x00000007 + 0x00000002 + 0x00000002 + 0x00000004 + 0x00000006 + 0x06040202 + 0x000b0607 + 0x77450e08 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emem-configuration = < + 0x0f000005 + 0x80000040 + 0x00000001 + 0x00000002 + 0x00000009 + 0x00000005 + 0x00000006 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000002 + 0x00000002 + 0x00000004 + 0x00000006 + 0x06040202 + 0x000d0709 + 0x7586120a + 0x70000f03 + 0x001f0000 + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emem-configuration = < + 0x0f000007 + 0x80000040 + 0x00000002 + 0x00000003 + 0x0000000c + 0x00000007 + 0x00000008 + 0x00000001 + 0x00000002 + 0x00000009 + 0x00000002 + 0x00000002 + 0x00000005 + 0x00000006 + 0x06050202 + 0x0010090c + 0x7428180d + 0x70000f03 + 0x001f0000 + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emem-configuration = < + 0x00000009 + 0x80000040 + 0x00000003 + 0x00000004 + 0x0000000e + 0x00000009 + 0x0000000a + 0x00000001 + 0x00000003 + 0x0000000b + 0x00000002 + 0x00000002 + 0x00000005 + 0x00000007 + 0x07050202 + 0x00130b0e + 0x73a91b0f + 0x70000f03 + 0x001f0000 + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emem-configuration = < + 0x0e00000b + 0x80000040 + 0x00000004 + 0x00000005 + 0x00000013 + 0x0000000c + 0x0000000d + 0x00000002 + 0x00000003 + 0x0000000c + 0x00000002 + 0x00000002 + 0x00000006 + 0x00000008 + 0x08060202 + 0x00170e13 + 0x736c2414 + 0x70000f02 + 0x001f0000 + >; + }; + + timing-924000000 { + clock-frequency = <924000000>; + + nvidia,emem-configuration = < + 0x0e00000d + 0x80000040 + 0x00000005 + 0x00000006 + 0x00000016 + 0x0000000e + 0x0000000f + 0x00000002 + 0x00000004 + 0x0000000e + 0x00000002 + 0x00000002 + 0x00000006 + 0x00000009 + 0x09060202 + 0x001a1016 + 0x734e2a17 + 0x70000f02 + 0x001f0000 + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index dbfaba09703a62f0b88aa043286d14f9b2a8e883..ed8a8acd3d34b44d9e63afedf6f6a88e541e96d5 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -3,6 +3,8 @@ #include #include "tegra124.dtsi" +#include "tegra124-jetson-tk1-emc.dtsi" + / { model = "NVIDIA Tegra124 Jetson TK1"; compatible = "nvidia,jetson-tk1", "nvidia,tegra124"; @@ -60,35 +62,35 @@ nvidia,pins = "clk_32k_out_pa0"; nvidia,function = "soc"; nvidia,pull = ; - nvidia,tristate = ; + nvidia,tristate = ; nvidia,enable-input = ; }; uart3_cts_n_pa1 { nvidia,pins = "uart3_cts_n_pa1"; - nvidia,function = "uartc"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; dap2_fs_pa2 { nvidia,pins = "dap2_fs_pa2"; nvidia,function = "i2s1"; nvidia,pull = ; nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,enable-input = ; }; dap2_sclk_pa3 { nvidia,pins = "dap2_sclk_pa3"; nvidia,function = "i2s1"; nvidia,pull = ; nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,enable-input = ; }; dap2_din_pa4 { nvidia,pins = "dap2_din_pa4"; nvidia,function = "i2s1"; nvidia,pull = ; - nvidia,tristate = ; + nvidia,tristate = ; nvidia,enable-input = ; }; dap2_dout_pa5 { @@ -96,14 +98,14 @@ nvidia,function = "i2s1"; nvidia,pull = ; nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,enable-input = ; }; sdmmc3_clk_pa6 { nvidia,pins = "sdmmc3_clk_pa6"; nvidia,function = "sdmmc3"; nvidia,pull = ; nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,enable-input = ; }; sdmmc3_cmd_pa7 { nvidia,pins = "sdmmc3_cmd_pa7"; @@ -116,14 +118,14 @@ nvidia,pins = "pb0"; nvidia,function = "uartd"; nvidia,pull = ; - nvidia,tristate = ; + nvidia,tristate = ; nvidia,enable-input = ; }; pb1 { nvidia,pins = "pb1"; nvidia,function = "uartd"; nvidia,pull = ; - nvidia,tristate = ; + nvidia,tristate = ; nvidia,enable-input = ; }; sdmmc3_dat3_pb4 { @@ -156,9 +158,9 @@ }; uart3_rts_n_pc0 { nvidia,pins = "uart3_rts_n_pc0"; - nvidia,function = "uartc"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; uart2_txd_pc2 { @@ -172,7 +174,7 @@ nvidia,pins = "uart2_rxd_pc3"; nvidia,function = "irda"; nvidia,pull = ; - nvidia,tristate = ; + nvidia,tristate = ; nvidia,enable-input = ; }; gen1_i2c_scl_pc4 { @@ -194,44 +196,39 @@ pc7 { nvidia,pins = "pc7"; nvidia,function = "rsvd1"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; pg0 { nvidia,pins = "pg0"; - nvidia,function = "rsvd1"; nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; pg1 { nvidia,pins = "pg1"; - nvidia,function = "rsvd1"; nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; pg2 { nvidia,pins = "pg2"; - nvidia,function = "rsvd1"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; pg3 { nvidia,pins = "pg3"; - nvidia,function = "rsvd1"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; pg4 { nvidia,pins = "pg4"; - nvidia,function = "spi4"; nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; pg5 { nvidia,pins = "pg5"; @@ -251,7 +248,7 @@ nvidia,pins = "pg7"; nvidia,function = "spi4"; nvidia,pull = ; - nvidia,tristate = ; + nvidia,tristate = ; nvidia,enable-input = ; }; ph0 { @@ -270,7 +267,6 @@ }; ph2 { nvidia,pins = "ph2"; - nvidia,function = "gmi"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; @@ -278,57 +274,53 @@ ph3 { nvidia,pins = "ph3"; nvidia,function = "gmi"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; ph4 { nvidia,pins = "ph4"; - nvidia,function = "rsvd2"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; ph5 { nvidia,pins = "ph5"; nvidia,function = "rsvd2"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; ph6 { nvidia,pins = "ph6"; nvidia,function = "gmi"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; ph7 { nvidia,pins = "ph7"; - nvidia,function = "gmi"; nvidia,pull = ; nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,enable-input = ; }; pi0 { nvidia,pins = "pi0"; - nvidia,function = "rsvd1"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; pi1 { nvidia,pins = "pi1"; - nvidia,function = "rsvd1"; - nvidia,pull = ; + nvidia,pull = ; nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,enable-input = ; }; pi2 { nvidia,pins = "pi2"; nvidia,function = "rsvd4"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; pi3 { @@ -341,22 +333,21 @@ pi4 { nvidia,pins = "pi4"; nvidia,function = "gmi"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; pi5 { nvidia,pins = "pi5"; nvidia,function = "rsvd2"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; pi6 { nvidia,pins = "pi6"; - nvidia,function = "rsvd1"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; pi7 { @@ -368,23 +359,22 @@ }; pj0 { nvidia,pins = "pj0"; - nvidia,function = "rsvd1"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; pj2 { nvidia,pins = "pj2"; nvidia,function = "rsvd1"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; uart2_cts_n_pj5 { nvidia,pins = "uart2_cts_n_pj5"; nvidia,function = "uartb"; nvidia,pull = ; - nvidia,tristate = ; + nvidia,tristate = ; nvidia,enable-input = ; }; uart2_rts_n_pj6 { @@ -403,35 +393,32 @@ }; pk0 { nvidia,pins = "pk0"; - nvidia,function = "soc"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; pk1 { nvidia,pins = "pk1"; - nvidia,function = "rsvd4"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; pk2 { nvidia,pins = "pk2"; - nvidia,function = "rsvd1"; - nvidia,pull = ; + nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; pk3 { nvidia,pins = "pk3"; nvidia,function = "gmi"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; pk4 { nvidia,pins = "pk4"; - nvidia,function = "rsvd2"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; @@ -439,13 +426,12 @@ spdif_out_pk5 { nvidia,pins = "spdif_out_pk5"; nvidia,function = "rsvd2"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; spdif_in_pk6 { nvidia,pins = "spdif_in_pk6"; - nvidia,function = "rsvd2"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; @@ -459,17 +445,17 @@ }; dap1_fs_pn0 { nvidia,pins = "dap1_fs_pn0"; - nvidia,function = "i2s0"; + nvidia,function = "rsvd4"; nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; dap1_din_pn1 { nvidia,pins = "dap1_din_pn1"; - nvidia,function = "i2s0"; + nvidia,function = "rsvd4"; nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; dap1_dout_pn2 { nvidia,pins = "dap1_dout_pn2"; @@ -480,108 +466,104 @@ }; dap1_sclk_pn3 { nvidia,pins = "dap1_sclk_pn3"; - nvidia,function = "i2s0"; + nvidia,function = "rsvd4"; nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; usb_vbus_en0_pn4 { nvidia,pins = "usb_vbus_en0_pn4"; nvidia,function = "usb"; - nvidia,pull = ; + nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; - nvidia,open-drain = ; + nvidia,open-drain = ; }; usb_vbus_en1_pn5 { nvidia,pins = "usb_vbus_en1_pn5"; nvidia,function = "usb"; - nvidia,pull = ; + nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; - nvidia,open-drain = ; + nvidia,open-drain = ; }; hdmi_int_pn7 { nvidia,pins = "hdmi_int_pn7"; - nvidia,function = "rsvd1"; nvidia,pull = ; - nvidia,tristate = ; + nvidia,tristate = ; nvidia,enable-input = ; nvidia,rcv-sel = ; }; ulpi_data7_po0 { nvidia,pins = "ulpi_data7_po0"; nvidia,function = "ulpi"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; ulpi_data0_po1 { nvidia,pins = "ulpi_data0_po1"; - nvidia,function = "ulpi"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; ulpi_data1_po2 { nvidia,pins = "ulpi_data1_po2"; nvidia,function = "ulpi"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; ulpi_data2_po3 { nvidia,pins = "ulpi_data2_po3"; nvidia,function = "ulpi"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; ulpi_data3_po4 { nvidia,pins = "ulpi_data3_po4"; - nvidia,function = "ulpi"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; ulpi_data4_po5 { nvidia,pins = "ulpi_data4_po5"; nvidia,function = "ulpi"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; ulpi_data5_po6 { nvidia,pins = "ulpi_data5_po6"; nvidia,function = "ulpi"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; ulpi_data6_po7 { nvidia,pins = "ulpi_data6_po7"; nvidia,function = "ulpi"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; dap3_fs_pp0 { nvidia,pins = "dap3_fs_pp0"; nvidia,function = "i2s2"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; dap3_din_pp1 { nvidia,pins = "dap3_din_pp1"; nvidia,function = "i2s2"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; dap3_dout_pp2 { nvidia,pins = "dap3_dout_pp2"; - nvidia,function = "rsvd4"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; @@ -595,91 +577,87 @@ }; dap4_fs_pp4 { nvidia,pins = "dap4_fs_pp4"; - nvidia,function = "i2s3"; + nvidia,function = "rsvd4"; nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; dap4_din_pp5 { nvidia,pins = "dap4_din_pp5"; - nvidia,function = "i2s3"; + nvidia,function = "rsvd3"; nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; dap4_dout_pp6 { nvidia,pins = "dap4_dout_pp6"; - nvidia,function = "i2s3"; + nvidia,function = "rsvd4"; nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; dap4_sclk_pp7 { nvidia,pins = "dap4_sclk_pp7"; - nvidia,function = "i2s3"; + nvidia,function = "rsvd3"; nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; kb_col0_pq0 { nvidia,pins = "kb_col0_pq0"; - nvidia,function = "rsvd2"; nvidia,pull = ; - nvidia,tristate = ; + nvidia,tristate = ; nvidia,enable-input = ; }; kb_col1_pq1 { nvidia,pins = "kb_col1_pq1"; nvidia,function = "rsvd2"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; kb_col2_pq2 { nvidia,pins = "kb_col2_pq2"; nvidia,function = "rsvd2"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; kb_col3_pq3 { nvidia,pins = "kb_col3_pq3"; - nvidia,function = "kbc"; - nvidia,pull = ; + nvidia,pull = ; nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,enable-input = ; }; kb_col4_pq4 { nvidia,pins = "kb_col4_pq4"; nvidia,function = "sdmmc3"; nvidia,pull = ; - nvidia,tristate = ; + nvidia,tristate = ; nvidia,enable-input = ; }; kb_col5_pq5 { nvidia,pins = "kb_col5_pq5"; - nvidia,function = "rsvd2"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; kb_col6_pq6 { nvidia,pins = "kb_col6_pq6"; nvidia,function = "rsvd2"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; kb_col7_pq7 { nvidia,pins = "kb_col7_pq7"; - nvidia,function = "rsvd2"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; kb_row0_pr0 { nvidia,pins = "kb_row0_pr0"; - nvidia,function = "rsvd2"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; @@ -687,121 +665,115 @@ kb_row1_pr1 { nvidia,pins = "kb_row1_pr1"; nvidia,function = "rsvd2"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; kb_row2_pr2 { nvidia,pins = "kb_row2_pr2"; - nvidia,function = "rsvd2"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; kb_row3_pr3 { nvidia,pins = "kb_row3_pr3"; - nvidia,function = "sys"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; kb_row4_pr4 { nvidia,pins = "kb_row4_pr4"; - nvidia,function = "rsvd3"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; kb_row5_pr5 { nvidia,pins = "kb_row5_pr5"; nvidia,function = "rsvd3"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; kb_row6_pr6 { nvidia,pins = "kb_row6_pr6"; nvidia,function = "displaya_alt"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; kb_row7_pr7 { nvidia,pins = "kb_row7_pr7"; - nvidia,function = "rsvd2"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; kb_row8_ps0 { nvidia,pins = "kb_row8_ps0"; nvidia,function = "rsvd2"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; kb_row9_ps1 { nvidia,pins = "kb_row9_ps1"; - nvidia,function = "rsvd2"; + nvidia,function = "uarta"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; kb_row10_ps2 { nvidia,pins = "kb_row10_ps2"; - nvidia,function = "rsvd2"; + nvidia,function = "uarta"; nvidia,pull = ; - nvidia,tristate = ; + nvidia,tristate = ; nvidia,enable-input = ; }; kb_row11_ps3 { nvidia,pins = "kb_row11_ps3"; nvidia,function = "rsvd2"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; kb_row12_ps4 { nvidia,pins = "kb_row12_ps4"; nvidia,function = "rsvd2"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; kb_row13_ps5 { nvidia,pins = "kb_row13_ps5"; nvidia,function = "rsvd2"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; kb_row14_ps6 { nvidia,pins = "kb_row14_ps6"; nvidia,function = "rsvd2"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; kb_row15_ps7 { nvidia,pins = "kb_row15_ps7"; - nvidia,function = "soc"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; kb_row16_pt0 { nvidia,pins = "kb_row16_pt0"; - nvidia,function = "rsvd2"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; kb_row17_pt1 { nvidia,pins = "kb_row17_pt1"; - nvidia,function = "rsvd2"; nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; gen2_i2c_scl_pt5 { nvidia,pins = "gen2_i2c_scl_pt5"; @@ -828,72 +800,63 @@ }; pu0 { nvidia,pins = "pu0"; - nvidia,function = "rsvd4"; nvidia,pull = ; nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,enable-input = ; }; pu1 { nvidia,pins = "pu1"; - nvidia,function = "rsvd1"; - nvidia,pull = ; + nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; pu2 { nvidia,pins = "pu2"; - nvidia,function = "rsvd1"; - nvidia,pull = ; + nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; pu3 { nvidia,pins = "pu3"; - nvidia,function = "gmi"; nvidia,pull = ; nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,enable-input = ; }; pu4 { nvidia,pins = "pu4"; - nvidia,function = "gmi"; nvidia,pull = ; nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,enable-input = ; }; pu5 { nvidia,pins = "pu5"; - nvidia,function = "gmi"; - nvidia,pull = ; + nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; pu6 { nvidia,pins = "pu6"; - nvidia,function = "rsvd3"; - nvidia,pull = ; + nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; pv0 { nvidia,pins = "pv0"; - nvidia,function = "rsvd1"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; pv1 { nvidia,pins = "pv1"; - nvidia,function = "rsvd1"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; sdmmc3_cd_n_pv2 { nvidia,pins = "sdmmc3_cd_n_pv2"; nvidia,function = "sdmmc3"; nvidia,pull = ; - nvidia,tristate = ; + nvidia,tristate = ; nvidia,enable-input = ; }; sdmmc1_wp_n_pv3 { @@ -922,16 +885,16 @@ gpio_w2_aud_pw2 { nvidia,pins = "gpio_w2_aud_pw2"; nvidia,function = "rsvd2"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; gpio_w3_aud_pw3 { nvidia,pins = "gpio_w3_aud_pw3"; nvidia,function = "spi6"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; dap_mclk1_pw4 { nvidia,pins = "dap_mclk1_pw4"; @@ -949,17 +912,17 @@ }; uart3_txd_pw6 { nvidia,pins = "uart3_txd_pw6"; - nvidia,function = "uartc"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; uart3_rxd_pw7 { nvidia,pins = "uart3_rxd_pw7"; - nvidia,function = "uartc"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; dvfs_pwm_px0 { nvidia,pins = "dvfs_pwm_px0"; @@ -970,10 +933,9 @@ }; gpio_x1_aud_px1 { nvidia,pins = "gpio_x1_aud_px1"; - nvidia,function = "rsvd2"; nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; dvfs_clk_px2 { nvidia,pins = "dvfs_clk_px2"; @@ -985,34 +947,32 @@ gpio_x3_aud_px3 { nvidia,pins = "gpio_x3_aud_px3"; nvidia,function = "rsvd4"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; gpio_x4_aud_px4 { nvidia,pins = "gpio_x4_aud_px4"; - nvidia,function = "gmi"; nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; gpio_x5_aud_px5 { nvidia,pins = "gpio_x5_aud_px5"; nvidia,function = "rsvd4"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; gpio_x6_aud_px6 { nvidia,pins = "gpio_x6_aud_px6"; nvidia,function = "gmi"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; gpio_x7_aud_px7 { nvidia,pins = "gpio_x7_aud_px7"; - nvidia,function = "rsvd1"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; @@ -1027,8 +987,8 @@ ulpi_dir_py1 { nvidia,pins = "ulpi_dir_py1"; nvidia,function = "spi1"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; ulpi_nxt_py2 { @@ -1048,44 +1008,44 @@ sdmmc1_dat3_py4 { nvidia,pins = "sdmmc1_dat3_py4"; nvidia,function = "sdmmc1"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; sdmmc1_dat2_py5 { nvidia,pins = "sdmmc1_dat2_py5"; nvidia,function = "sdmmc1"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; sdmmc1_dat1_py6 { nvidia,pins = "sdmmc1_dat1_py6"; nvidia,function = "sdmmc1"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; sdmmc1_dat0_py7 { nvidia,pins = "sdmmc1_dat0_py7"; - nvidia,function = "sdmmc1"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; sdmmc1_clk_pz0 { nvidia,pins = "sdmmc1_clk_pz0"; - nvidia,function = "sdmmc1"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,function = "rsvd3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; sdmmc1_cmd_pz1 { nvidia,pins = "sdmmc1_cmd_pz1"; nvidia,function = "sdmmc1"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; pwr_i2c_scl_pz6 { nvidia,pins = "pwr_i2c_scl_pz6"; @@ -1184,7 +1144,6 @@ }; pbb3 { nvidia,pins = "pbb3"; - nvidia,function = "vgp3"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; @@ -1198,21 +1157,18 @@ }; pbb5 { nvidia,pins = "pbb5"; - nvidia,function = "rsvd3"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; pbb6 { nvidia,pins = "pbb6"; - nvidia,function = "rsvd2"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; pbb7 { nvidia,pins = "pbb7"; - nvidia,function = "rsvd2"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; @@ -1226,15 +1182,13 @@ }; pcc1 { nvidia,pins = "pcc1"; - nvidia,function = "rsvd2"; - nvidia,pull = ; + nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; pcc2 { nvidia,pins = "pcc2"; - nvidia,function = "rsvd2"; - nvidia,pull = ; + nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; @@ -1248,8 +1202,8 @@ clk2_req_pcc5 { nvidia,pins = "clk2_req_pcc5"; nvidia,function = "rsvd2"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; pex_l0_rst_n_pdd1 { @@ -1262,15 +1216,15 @@ pex_l0_clkreq_n_pdd2 { nvidia,pins = "pex_l0_clkreq_n_pdd2"; nvidia,function = "pe0"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; pex_wake_n_pdd3 { nvidia,pins = "pex_wake_n_pdd3"; nvidia,function = "pe"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; pex_l1_rst_n_pdd5 { @@ -1283,8 +1237,8 @@ pex_l1_clkreq_n_pdd6 { nvidia,pins = "pex_l1_clkreq_n_pdd6"; nvidia,function = "pe1"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; clk3_out_pee0 { @@ -1297,13 +1251,12 @@ clk3_req_pee1 { nvidia,pins = "clk3_req_pee1"; nvidia,function = "rsvd2"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; dap_mclk1_req_pee2 { nvidia,pins = "dap_mclk1_req_pee2"; - nvidia,function = "sata"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; @@ -1314,7 +1267,7 @@ nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; - nvidia,open-drain = ; + nvidia,open-drain = ; }; sdmmc3_clk_lb_out_pee4 { nvidia,pins = "sdmmc3_clk_lb_out_pee4"; @@ -1333,24 +1286,24 @@ dp_hpd_pff0 { nvidia,pins = "dp_hpd_pff0"; nvidia,function = "dp"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; usb_vbus_en2_pff1 { nvidia,pins = "usb_vbus_en2_pff1"; nvidia,function = "rsvd2"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; nvidia,open-drain = ; }; pff2 { nvidia,pins = "pff2"; nvidia,function = "rsvd2"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; nvidia,open-drain = ; }; core_pwr_req { @@ -1362,7 +1315,7 @@ }; cpu_pwr_req { nvidia,pins = "cpu_pwr_req"; - nvidia,function = "rsvd2"; + nvidia,function = "cpu"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; @@ -1371,7 +1324,7 @@ nvidia,pins = "pwr_int_n"; nvidia,function = "pmi"; nvidia,pull = ; - nvidia,tristate = ; + nvidia,tristate = ; nvidia,enable-input = ; }; reset_out_n { @@ -1379,7 +1332,7 @@ nvidia,function = "reset_out_n"; nvidia,pull = ; nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,enable-input = ; }; owr { nvidia,pins = "owr"; @@ -1391,9 +1344,9 @@ }; clk_32k_in { nvidia,pins = "clk_32k_in"; - nvidia,function = "rsvd2"; + nvidia,function = "clk"; nvidia,pull = ; - nvidia,tristate = ; + nvidia,tristate = ; nvidia,enable-input = ; }; jtag_rtck { diff --git a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..1a5748d05dda1a97c1cace1d679ad5e1c13d589e --- /dev/null +++ b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi @@ -0,0 +1,2023 @@ +/ { + clock@0,60006000 { + emc-timings-1 { + nvidia,ram-code = <1>; + + timing-12750000 { + clock-frequency = <12750000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-20400000 { + clock-frequency = <20400000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-40800000 { + clock-frequency = <40800000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-68000000 { + clock-frequency = <68000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-300000000 { + clock-frequency = <300000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C>; + clock-names = "emc-parent"; + }; + timing-396000000 { + clock-frequency = <396000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M>; + clock-names = "emc-parent"; + }; + /* TODO: Add 528MHz frequency */ + timing-600000000 { + clock-frequency = <600000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>; + clock-names = "emc-parent"; + }; + timing-792000000 { + clock-frequency = <792000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + }; + }; + + emc@0,7001b000 { + emc-timings-1 { + nvidia,ram-code = <1>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000060 + 0x00000000 + 0x00000018 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000007 + 0x0000000f + 0x00000005 + 0x00000005 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000064 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000303 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000007 + 0x00000000 + 0x00000042 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x800001c5 + 0x0000000a + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 + 0x00000005 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x0000009a + 0x00000000 + 0x00000026 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000007 + 0x0000000f + 0x00000006 + 0x00000006 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000005 + 0x00000005 + 0x000000a0 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000303 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x0000000b + 0x00000000 + 0x00000042 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x8000023a + 0x0000000a + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000001 + 0x0000000a + 0x00000000 + 0x00000001 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000134 + 0x00000000 + 0x0000004d + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000008 + 0x0000000f + 0x0000000c + 0x0000000c + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000005 + 0x00000005 + 0x0000013f + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000303 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000015 + 0x00000000 + 0x00000042 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x80000370 + 0x0000000a + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000003 + 0x00000011 + 0x00000000 + 0x00000002 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000202 + 0x00000000 + 0x00000080 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x0000000f + 0x0000000f + 0x00000013 + 0x00000013 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000001 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000213 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000303 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000022 + 0x00000000 + 0x00000042 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x8000050e + 0x0000000a + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000004 + 0x0000001a + 0x00000000 + 0x00000003 + 0x00000001 + 0x00000004 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000001 + 0x00000001 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000304 + 0x00000000 + 0x000000c1 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000018 + 0x0000000f + 0x0000001c + 0x0000001c + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000003 + 0x00000000 + 0x00000005 + 0x00000005 + 0x0000031c + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000303 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000033 + 0x00000000 + 0x00000042 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x80000713 + 0x0000000a + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x0000088d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000009 + 0x00000035 + 0x00000000 + 0x00000007 + 0x00000002 + 0x00000005 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000002 + 0x00000002 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000004 + 0x00000006 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000003 + 0x0000000d + 0x0000000f + 0x00000011 + 0x00000607 + 0x00000000 + 0x00000181 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000032 + 0x0000000f + 0x00000038 + 0x00000038 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000007 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000638 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00090000 + 0x00090000 + 0x00094000 + 0x00094000 + 0x00009400 + 0x00009000 + 0x00009000 + 0x00009000 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000303 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000066 + 0x00000000 + 0x00000100 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000d2b3 + 0x80000d22 + 0x0000000a + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x000008d5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000321>; + nvidia,emc-mrs-wait-cnt = <0x0174000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000000d + 0x0000004c + 0x00000000 + 0x00000009 + 0x00000003 + 0x00000004 + 0x00000008 + 0x00000002 + 0x00000009 + 0x00000003 + 0x00000003 + 0x00000002 + 0x00000002 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000005 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000007 + 0x00020000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000001 + 0x0000000e + 0x00000010 + 0x00000012 + 0x000008e4 + 0x00000000 + 0x00000239 + 0x00000001 + 0x00000008 + 0x00000001 + 0x00000000 + 0x0000004a + 0x0000000e + 0x00000051 + 0x00000200 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000009 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000924 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0x002c00a0 + 0x00008000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00098000 + 0x00098000 + 0x00000000 + 0x00098000 + 0x00098000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00060000 + 0x00060000 + 0x00060000 + 0x00060000 + 0x00006000 + 0x00006000 + 0x00006000 + 0x00006000 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000101 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x51451420 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000096 + 0x00000000 + 0x00000100 + 0x0174000c + 0x00000000 + 0x00000003 + 0x000052a3 + 0x800012d7 + 0x00000009 + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x00000895>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000521>; + nvidia,emc-mrs-wait-cnt = <0x015b000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000012 + 0x00000065 + 0x00000000 + 0x0000000c + 0x00000004 + 0x00000005 + 0x00000008 + 0x00000002 + 0x0000000a + 0x00000004 + 0x00000004 + 0x00000002 + 0x00000002 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000005 + 0x00000002 + 0x00000000 + 0x00000001 + 0x00000008 + 0x00020000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000000f + 0x00000010 + 0x00000012 + 0x00000bd1 + 0x00000000 + 0x000002f4 + 0x00000001 + 0x00000008 + 0x00000001 + 0x00000000 + 0x00000063 + 0x0000000f + 0x0000006b + 0x00000200 + 0x00000004 + 0x00000005 + 0x00000004 + 0x0000000d + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000c11 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0x002c00a0 + 0x00008000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00070000 + 0x00070000 + 0x00000000 + 0x00070000 + 0x00070000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00048000 + 0x00048000 + 0x00048000 + 0x00048000 + 0x00004800 + 0x00004800 + 0x00004800 + 0x00004800 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000101 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x51451420 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x000000c6 + 0x00000000 + 0x00000100 + 0x015b000c + 0x00000000 + 0x00000003 + 0x000052a3 + 0x8000188b + 0x00000009 + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200010>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000b61>; + nvidia,emc-mrs-wait-cnt = <0x0128000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0121113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000001c + 0x0000009a + 0x00000000 + 0x00000013 + 0x00000007 + 0x00000007 + 0x0000000b + 0x00000003 + 0x00000010 + 0x00000007 + 0x00000007 + 0x00000002 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x0000000a + 0x00000002 + 0x00000000 + 0x00000003 + 0x0000000b + 0x00070000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000002 + 0x00000012 + 0x00000016 + 0x00000018 + 0x00001208 + 0x00000000 + 0x00000482 + 0x00000002 + 0x0000000d + 0x00000001 + 0x00000000 + 0x00000096 + 0x00000015 + 0x000000a2 + 0x00000200 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000015 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00001249 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0xe00e00b1 + 0x00008000 + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00048000 + 0x00048000 + 0x00000000 + 0x00048000 + 0x00048000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x00000004 + 0x00000002 + 0x00000005 + 0x00000006 + 0x00000003 + 0x00000006 + 0x00000005 + 0x00000004 + 0x00000004 + 0x00000002 + 0x00000005 + 0x00000006 + 0x00000003 + 0x00000006 + 0x00000005 + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x100002a0 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc085 + 0x00000101 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x51451420 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0606003f + 0x00000000 + 0x00000000 + 0x00000100 + 0x0128000c + 0x00000000 + 0x00000003 + 0x000040a0 + 0x800024aa + 0x0000000e + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0080089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200418>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000d71>; + nvidia,emc-mrs-wait-cnt = <0x00f8000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040000>; + nvidia,emc-xm2dqspadctrl2 = <0x0120113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000025 + 0x000000cc + 0x00000000 + 0x0000001a + 0x00000009 + 0x00000008 + 0x0000000d + 0x00000004 + 0x00000013 + 0x00000009 + 0x00000009 + 0x00000003 + 0x00000002 + 0x00000000 + 0x00000006 + 0x00000006 + 0x0000000b + 0x00000002 + 0x00000000 + 0x00000002 + 0x0000000d + 0x00080000 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000001 + 0x00000014 + 0x00000018 + 0x0000001a + 0x000017e2 + 0x00000000 + 0x000005f8 + 0x00000003 + 0x00000011 + 0x00000001 + 0x00000000 + 0x000000c6 + 0x00000018 + 0x000000d6 + 0x00000200 + 0x00000005 + 0x00000006 + 0x00000005 + 0x0000001d + 0x00000000 + 0x00000008 + 0x00000008 + 0x00001822 + 0x00000000 + 0x80000005 + 0x00000000 + 0x104ab198 + 0xe00700b1 + 0x00008000 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00034000 + 0x00034000 + 0x00000000 + 0x00034000 + 0x00034000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000008 + 0x00000008 + 0x00000005 + 0x00000009 + 0x00000009 + 0x00000007 + 0x00000009 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000005 + 0x00000009 + 0x00000009 + 0x00000007 + 0x00000009 + 0x00000008 + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x100002a0 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc085 + 0x00000101 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x61861820 + 0x00514514 + 0x00514514 + 0x61861800 + 0x0606003f + 0x00000000 + 0x00000000 + 0x00000100 + 0x00f8000c + 0x00000007 + 0x00000004 + 0x00004080 + 0x80003012 + 0x0000000f + >; + }; + + }; + }; + + memory-controller@0,70019000 { + emc-timings-1 { + nvidia,ram-code = <1>; + + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emem-configuration = < + 0x40040001 + 0x8000000a + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0402 + 0x77e30303 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emem-configuration = < + 0x40020001 + 0x80000012 + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0402 + 0x76230303 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emem-configuration = < + 0xa0000001 + 0x80000017 + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0402 + 0x74a30303 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emem-configuration = < + 0x00000001 + 0x8000001e + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0402 + 0x74230403 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emem-configuration = < + 0x08000001 + 0x80000026 + 0x00000001 + 0x00000001 + 0x00000003 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0403 + 0x73c30504 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emem-configuration = < + 0x01000003 + 0x80000040 + 0x00000001 + 0x00000001 + 0x00000005 + 0x00000002 + 0x00000004 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000004 + 0x00000006 + 0x06040203 + 0x000a0405 + 0x73840a06 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emem-configuration = < + 0x08000004 + 0x80000040 + 0x00000001 + 0x00000002 + 0x00000007 + 0x00000004 + 0x00000005 + 0x00000001 + 0x00000002 + 0x00000007 + 0x00000002 + 0x00000002 + 0x00000004 + 0x00000006 + 0x06040202 + 0x000b0607 + 0x77450e08 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emem-configuration = < + 0x0f000005 + 0x80000040 + 0x00000001 + 0x00000002 + 0x00000009 + 0x00000005 + 0x00000007 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000002 + 0x00000002 + 0x00000004 + 0x00000006 + 0x06040202 + 0x000d0709 + 0x7586120a + 0x70000f03 + 0x001f0000 + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emem-configuration = < + 0x00000009 + 0x80000040 + 0x00000003 + 0x00000004 + 0x0000000e + 0x00000009 + 0x0000000b + 0x00000001 + 0x00000003 + 0x0000000b + 0x00000002 + 0x00000002 + 0x00000005 + 0x00000007 + 0x07050202 + 0x00130b0e + 0x73a91b0f + 0x70000f03 + 0x001f0000 + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emem-configuration = < + 0x0e00000b + 0x80000040 + 0x00000004 + 0x00000005 + 0x00000013 + 0x0000000c + 0x0000000f + 0x00000002 + 0x00000003 + 0x0000000c + 0x00000002 + 0x00000002 + 0x00000006 + 0x00000008 + 0x08060202 + 0x00160d13 + 0x734c2414 + 0x70000f02 + 0x001f0000 + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts index 004e8e4e1c04f08a9b23a10c22c864c8e1011cf2..2d21253ea4e3c059665d693f8ae2ffa648cd32bf 100644 --- a/arch/arm/boot/dts/tegra124-nyan-big.dts +++ b/arch/arm/boot/dts/tegra124-nyan-big.dts @@ -1,46 +1,29 @@ /dts-v1/; -#include -#include "tegra124.dtsi" +#include "tegra124-nyan.dtsi" + +#include "tegra124-nyan-big-emc.dtsi" / { model = "Acer Chromebook 13 CB5-311"; compatible = "google,nyan-big", "nvidia,tegra124"; - aliases { - rtc0 = "/i2c@0,7000d000/pmic@40"; - rtc1 = "/rtc@0,7000e000"; - serial0 = &uarta; - }; + panel: panel { + compatible = "auo,b133xtn01"; - memory { - reg = <0x0 0x80000000 0x0 0x80000000>; + backlight = <&backlight>; + ddc-i2c-bus = <&dpaux>; }; - host1x@0,50000000 { - hdmi@0,54280000 { - status = "okay"; - - vdd-supply = <&vdd_3v3_hdmi>; - pll-supply = <&vdd_hdmi_pll>; - hdmi-supply = <&vdd_5v0_hdmi>; - - nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = - <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; - }; - - sor@0,54540000 { - status = "okay"; - - nvidia,dpaux = <&dpaux>; - nvidia,panel = <&panel>; - }; + sdhci@0,700b0400 { /* SD Card on this bus */ + wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; + }; - dpaux@0,545c0000 { - vdd-supply = <&vdd_3v3_panel>; - status = "okay"; - }; + sound { + compatible = "nvidia,tegra-audio-max98090-nyan-big", + "nvidia,tegra-audio-max98090-nyan", + "nvidia,tegra-audio-max98090"; + nvidia,model = "GoogleNyanBig"; }; pinmux@0,70000868 { @@ -48,1092 +31,1308 @@ pinctrl-0 = <&pinmux_default>; pinmux_default: common { - dap_mclk1_pw4 { - nvidia,pins = "dap_mclk1_pw4"; - nvidia,function = "extperiph1"; - nvidia,enable-input = ; + clk_32k_out_pa0 { + nvidia,pins = "clk_32k_out_pa0"; nvidia,pull = ; nvidia,tristate = ; - }; - dap2_din_pa4 { - nvidia,pins = "dap2_din_pa4"; - nvidia,function = "i2s1"; nvidia,enable-input = ; - nvidia,pull = ; - nvidia,tristate = ; }; - dap2_dout_pa5 { - nvidia,pins = "dap2_dout_pa5", - "dap2_fs_pa2", - "dap2_sclk_pa3"; - nvidia,function = "i2s1"; + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; - nvidia,pull = ; - nvidia,tristate = ; }; - dvfs_pwm_px0 { - nvidia,pins = "dvfs_pwm_px0", - "dvfs_clk_px2"; - nvidia,function = "cldvfs"; - nvidia,enable-input = ; + dap2_fs_pa2 { + nvidia,pins = "dap2_fs_pa2"; + nvidia,function = "i2s1"; nvidia,pull = ; nvidia,tristate = ; + nvidia,enable-input = ; }; - ulpi_clk_py0 { - nvidia,pins = "ulpi_clk_py0", - "ulpi_nxt_py2", - "ulpi_stp_py3"; - nvidia,function = "spi1"; - nvidia,enable-input = ; + dap2_sclk_pa3 { + nvidia,pins = "dap2_sclk_pa3"; + nvidia,function = "i2s1"; nvidia,pull = ; nvidia,tristate = ; - }; - ulpi_dir_py1 { - nvidia,pins = "ulpi_dir_py1"; - nvidia,function = "spi1"; nvidia,enable-input = ; - nvidia,pull = ; - nvidia,tristate = ; }; - cam_i2c_scl_pbb1 { - nvidia,pins = "cam_i2c_scl_pbb1", - "cam_i2c_sda_pbb2"; - nvidia,function = "i2c3"; - nvidia,enable-input = ; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; nvidia,pull = ; nvidia,tristate = ; - nvidia,lock = ; - nvidia,open-drain = ; - }; - gen2_i2c_scl_pt5 { - nvidia,pins = "gen2_i2c_scl_pt5", - "gen2_i2c_sda_pt6"; - nvidia,function = "i2c2"; nvidia,enable-input = ; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,lock = ; - nvidia,open-drain = ; }; - pg4 { - nvidia,pins = "pg4", - "pg5", - "pg6", - "pi3"; - nvidia,function = "spi4"; - nvidia,enable-input = ; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5"; + nvidia,function = "i2s1"; nvidia,pull = ; nvidia,tristate = ; - }; - pg7 { - nvidia,pins = "pg7"; - nvidia,function = "spi4"; nvidia,enable-input = ; - nvidia,pull = ; - nvidia,tristate = ; }; - ph1 { - nvidia,pins = "ph1"; - nvidia,function = "pwm1"; - nvidia,enable-input = ; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; nvidia,pull = ; nvidia,tristate = ; + nvidia,enable-input = ; }; - pk0 { - nvidia,pins = "pk0", - "kb_row15_ps7", - "clk_32k_out_pa0"; - nvidia,function = "soc"; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7"; + nvidia,function = "sdmmc3"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; - sdmmc1_clk_pz0 { - nvidia,pins = "sdmmc1_clk_pz0"; - nvidia,function = "sdmmc1"; + pb0 { + nvidia,pins = "pb0"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; - nvidia,pull = ; - nvidia,tristate = ; }; - sdmmc1_cmd_pz1 { - nvidia,pins = "sdmmc1_cmd_pz1", - "sdmmc1_dat0_py7", - "sdmmc1_dat1_py6", - "sdmmc1_dat2_py5", - "sdmmc1_dat3_py4"; - nvidia,function = "sdmmc1"; - nvidia,enable-input = ; - nvidia,pull = ; - nvidia,tristate = ; + pb1 { + nvidia,pins = "pb1"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; - sdmmc3_clk_pa6 { - nvidia,pins = "sdmmc3_clk_pa6"; + sdmmc3_dat3_pb4 { + nvidia,pins = "sdmmc3_dat3_pb4"; nvidia,function = "sdmmc3"; - nvidia,enable-input = ; - nvidia,pull = ; + nvidia,pull = ; nvidia,tristate = ; + nvidia,enable-input = ; }; - sdmmc3_cmd_pa7 { - nvidia,pins = "sdmmc3_cmd_pa7", - "sdmmc3_dat0_pb7", - "sdmmc3_dat1_pb6", - "sdmmc3_dat2_pb5", - "sdmmc3_dat3_pb4", - "kb_col4_pq4", - "sdmmc3_clk_lb_out_pee4", - "sdmmc3_clk_lb_in_pee5", - "sdmmc3_cd_n_pv2"; + sdmmc3_dat2_pb5 { + nvidia,pins = "sdmmc3_dat2_pb5"; nvidia,function = "sdmmc3"; - nvidia,enable-input = ; nvidia,pull = ; nvidia,tristate = ; - }; - sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4"; - nvidia,function = "sdmmc4"; nvidia,enable-input = ; - nvidia,pull = ; - nvidia,tristate = ; }; - sdmmc4_cmd_pt7 { - nvidia,pins = "sdmmc4_cmd_pt7", - "sdmmc4_dat0_paa0", - "sdmmc4_dat1_paa1", - "sdmmc4_dat2_paa2", - "sdmmc4_dat3_paa3", - "sdmmc4_dat4_paa4", - "sdmmc4_dat5_paa5", - "sdmmc4_dat6_paa6", - "sdmmc4_dat7_paa7"; - nvidia,function = "sdmmc4"; - nvidia,enable-input = ; + sdmmc3_dat1_pb6 { + nvidia,pins = "sdmmc3_dat1_pb6"; + nvidia,function = "sdmmc3"; nvidia,pull = ; nvidia,tristate = ; - }; - pwr_i2c_scl_pz6 { - nvidia,pins = "pwr_i2c_scl_pz6", - "pwr_i2c_sda_pz7"; - nvidia,function = "i2cpwr"; nvidia,enable-input = ; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,lock = ; - nvidia,open-drain = ; }; - jtag_rtck { - nvidia,pins = "jtag_rtck"; - nvidia,function = "rtck"; - nvidia,enable-input = ; + sdmmc3_dat0_pb7 { + nvidia,pins = "sdmmc3_dat0_pb7"; + nvidia,function = "sdmmc3"; nvidia,pull = ; nvidia,tristate = ; - }; - clk_32k_in { - nvidia,pins = "clk_32k_in"; - nvidia,function = "clk"; nvidia,enable-input = ; - nvidia,pull = ; - nvidia,tristate = ; }; - core_pwr_req { - nvidia,pins = "core_pwr_req"; - nvidia,function = "pwron"; + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; - nvidia,pull = ; - nvidia,tristate = ; }; - cpu_pwr_req { - nvidia,pins = "cpu_pwr_req"; - nvidia,function = "cpu"; + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "irda"; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; - nvidia,pull = ; - nvidia,tristate = ; - }; - pwr_int_n { - nvidia,pins = "pwr_int_n"; - nvidia,function = "pmi"; - nvidia,enable-input = ; - nvidia,pull = ; - nvidia,tristate = ; }; - reset_out_n { - nvidia,pins = "reset_out_n"; - nvidia,function = "reset_out_n"; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "irda"; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; - nvidia,pull = ; - nvidia,tristate = ; }; - clk3_out_pee0 { - nvidia,pins = "clk3_out_pee0"; - nvidia,function = "extperiph3"; - nvidia,enable-input = ; + gen1_i2c_scl_pc4 { + nvidia,pins = "gen1_i2c_scl_pc4"; + nvidia,function = "i2c1"; nvidia,pull = ; nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; }; gen1_i2c_sda_pc5 { - nvidia,pins = "gen1_i2c_sda_pc5", - "gen1_i2c_scl_pc4"; + nvidia,pins = "gen1_i2c_sda_pc5"; nvidia,function = "i2c1"; - nvidia,enable-input = ; nvidia,pull = ; nvidia,tristate = ; - nvidia,lock = ; + nvidia,enable-input = ; nvidia,open-drain = ; }; - hdmi_cec_pee3 { - nvidia,pins = "hdmi_cec_pee3"; - nvidia,function = "cec"; - nvidia,enable-input = ; + pc7 { + nvidia,pins = "pc7"; nvidia,pull = ; nvidia,tristate = ; - nvidia,lock = ; - nvidia,open-drain = ; - }; - hdmi_int_pn7 { - nvidia,pins = "hdmi_int_pn7"; - nvidia,function = "rsvd1"; nvidia,enable-input = ; - nvidia,pull = ; + }; + pg0 { + nvidia,pins = "pg0"; + nvidia,pull = ; nvidia,tristate = ; + nvidia,enable-input = ; }; - ddc_scl_pv4 { - nvidia,pins = "ddc_scl_pv4", - "ddc_sda_pv5"; - nvidia,function = "i2c4"; + pg1 { + nvidia,pins = "pg1"; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; + }; + pg2 { + nvidia,pins = "pg2"; nvidia,pull = ; nvidia,tristate = ; - nvidia,lock = ; - nvidia,rcv-sel = ; + nvidia,enable-input = ; }; - kb_row10_ps2 { - nvidia,pins = "kb_row10_ps2"; - nvidia,function = "uarta"; - nvidia,pull = ; + pg3 { + nvidia,pins = "pg3"; + nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; - kb_row9_ps1 { - nvidia,pins = "kb_row9_ps1"; - nvidia,function = "uarta"; + pg4 { + nvidia,pins = "pg4"; + nvidia,function = "spi4"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; - usb_vbus_en0_pn4 { - nvidia,pins = "usb_vbus_en0_pn4", - "usb_vbus_en1_pn5"; - nvidia,function = "usb"; - nvidia,enable-input = ; + pg5 { + nvidia,pins = "pg5"; + nvidia,function = "spi4"; nvidia,pull = ; nvidia,tristate = ; - nvidia,lock = ; - nvidia,open-drain = ; + nvidia,enable-input = ; }; - drive_sdio1 { - nvidia,pins = "drive_sdio1"; - nvidia,high-speed-mode = ; - nvidia,schmitt = ; - nvidia,pull-down-strength = <36>; - nvidia,pull-up-strength = <20>; - nvidia,slew-rate-rising = ; - nvidia,slew-rate-falling = ; - }; - drive_sdio3 { - nvidia,pins = "drive_sdio3"; - nvidia,high-speed-mode = ; - nvidia,schmitt = ; - nvidia,pull-down-strength = <22>; - nvidia,pull-up-strength = <36>; - nvidia,slew-rate-rising = ; - nvidia,slew-rate-falling = ; - }; - drive_gma { - nvidia,pins = "drive_gma"; - nvidia,high-speed-mode = ; - nvidia,schmitt = ; - nvidia,pull-down-strength = <2>; - nvidia,pull-up-strength = <1>; - nvidia,slew-rate-rising = ; - nvidia,slew-rate-falling = ; - nvidia,drive-type = <1>; - }; - codec_irq_l { - nvidia,pins = "ph4"; - nvidia,function = "gmi"; + pg6 { + nvidia,pins = "pg6"; + nvidia,function = "spi4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pg7 { + nvidia,pins = "pg7"; + nvidia,function = "spi4"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; - lcd_bl_en { - nvidia,pins = "ph2"; + ph0 { + nvidia,pins = "ph0"; nvidia,function = "gmi"; nvidia,pull = ; - nvidia,tristate = ; + nvidia,tristate = ; nvidia,enable-input = ; }; - touch_irq_l { - nvidia,pins = "gpio_w3_aud_pw3"; - nvidia,function = "spi6"; + ph1 { + nvidia,pins = "ph1"; + nvidia,function = "pwm1"; nvidia,pull = ; nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,enable-input = ; }; - tpm_davint_l { - nvidia,pins = "ph6"; - nvidia,function = "gmi"; + ph2 { + nvidia,pins = "ph2"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; - ts_irq_l { - nvidia,pins = "pk2"; + ph3 { + nvidia,pins = "ph3"; nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ph4 { + nvidia,pins = "ph4"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; - ts_reset_l { - nvidia,pins = "pk4"; - nvidia,function = "gmi"; - nvidia,pull = ; - nvidia,tristate = ; + ph5 { + nvidia,pins = "ph5"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; - ts_shdn_l { - nvidia,pins = "pk1"; - nvidia,function = "gmi"; - nvidia,pull = ; + ph6 { + nvidia,pins = "ph6"; + nvidia,pull = ; nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,enable-input = ; }; ph7 { nvidia,pins = "ph7"; - nvidia,function = "gmi"; nvidia,pull = ; nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,enable-input = ; }; - kb_col0_ap { - nvidia,pins = "kb_col0_pq0"; - nvidia,function = "rsvd4"; - nvidia,pull = ; + pi0 { + nvidia,pins = "pi0"; + nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; - lid_open { - nvidia,pins = "kb_row4_pr4"; - nvidia,function = "rsvd3"; - nvidia,pull = ; + pi1 { + nvidia,pins = "pi1"; + nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; - en_vdd_sd { - nvidia,pins = "kb_row0_pr0"; + pi2 { + nvidia,pins = "pi2"; nvidia,function = "rsvd4"; - nvidia,pull = ; - nvidia,tristate = ; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; - ac_ok { - nvidia,pins = "pj0"; + pi3 { + nvidia,pins = "pi3"; + nvidia,function = "spi4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pi4 { + nvidia,pins = "pi4"; nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pi5 { + nvidia,pins = "pi5"; nvidia,pull = ; nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,enable-input = ; }; - sensor_irq_l { + pi6 { nvidia,pins = "pi6"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pi7 { + nvidia,pins = "pi7"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pj0 { + nvidia,pins = "pj0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pj2 { + nvidia,pins = "pj2"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart2_cts_n_pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart2_rts_n_pj6 { + nvidia,pins = "uart2_rts_n_pj6"; nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pj7 { + nvidia,pins = "pj7"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; - wifi_en { - nvidia,pins = "gpio_x7_aud_px7"; - nvidia,function = "rsvd4"; + pk0 { + nvidia,pins = "pk0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pk1 { + nvidia,pins = "pk1"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; - en_vdd_bl { - nvidia,pins = "dap3_dout_pp2"; - nvidia,function = "i2s2"; + pk2 { + nvidia,pins = "pk2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pk3 { + nvidia,pins = "pk3"; + nvidia,function = "gmi"; nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pk4 { + nvidia,pins = "pk4"; + nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; - en_vdd_hdmi { + spdif_out_pk5 { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spdif_in_pk6 { nvidia,pins = "spdif_in_pk6"; - nvidia,function = "spdif"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; - soc_warm_reset_l { - nvidia,pins = "pi5"; - nvidia,function = "gmi"; - nvidia,pull = ; + pk7 { + nvidia,pins = "pk7"; + nvidia,pull = ; nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap1_fs_pn0 { + nvidia,pins = "dap1_fs_pn0"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; nvidia,enable-input = ; }; - hp_det_l { - nvidia,pins = "pi7"; - nvidia,function = "rsvd1"; + dap1_din_pn1 { + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap1_dout_pn2 { + nvidia,pins = "dap1_dout_pn2"; + nvidia,function = "i2s0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap1_sclk_pn3 { + nvidia,pins = "dap1_sclk_pn3"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4"; + nvidia,function = "usb"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; + nvidia,open-drain = ; }; - mic_det_l { - nvidia,pins = "kb_row7_pr7"; + usb_vbus_en1_pn5 { + nvidia,pins = "usb_vbus_en1_pn5"; + nvidia,function = "usb"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,rcv-sel = ; + }; + ulpi_data7_po0 { + nvidia,pins = "ulpi_data7_po0"; + nvidia,function = "ulpi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data0_po1 { + nvidia,pins = "ulpi_data0_po1"; + nvidia,function = "ulpi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data1_po2 { + nvidia,pins = "ulpi_data1_po2"; + nvidia,function = "ulpi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data2_po3 { + nvidia,pins = "ulpi_data2_po3"; + nvidia,function = "ulpi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data3_po4 { + nvidia,pins = "ulpi_data3_po4"; + nvidia,function = "ulpi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data4_po5 { + nvidia,pins = "ulpi_data4_po5"; + nvidia,function = "ulpi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data5_po6 { + nvidia,pins = "ulpi_data5_po6"; + nvidia,function = "ulpi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data6_po7 { + nvidia,pins = "ulpi_data6_po7"; + nvidia,function = "ulpi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0"; + nvidia,function = "i2s2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap3_din_pp1 { + nvidia,pins = "dap3_din_pp1"; + nvidia,function = "i2s2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap3_dout_pp2 { + nvidia,pins = "dap3_dout_pp2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap3_sclk_pp3 { + nvidia,pins = "dap3_sclk_pp3"; + nvidia,function = "rsvd3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap4_fs_pp4 { + nvidia,pins = "dap4_fs_pp4"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap4_din_pp5 { + nvidia,pins = "dap4_din_pp5"; + nvidia,function = "rsvd3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap4_dout_pp6 { + nvidia,pins = "dap4_dout_pp6"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap4_sclk_pp7 { + nvidia,pins = "dap4_sclk_pp7"; + nvidia,function = "rsvd3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col0_pq0 { + nvidia,pins = "kb_col0_pq0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col1_pq1 { + nvidia,pins = "kb_col1_pq1"; nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col2_pq2 { + nvidia,pins = "kb_col2_pq2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col3_pq3 { + nvidia,pins = "kb_col3_pq3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col4_pq4 { + nvidia,pins = "kb_col4_pq4"; + nvidia,function = "sdmmc3"; nvidia,pull = ; nvidia,tristate = ; nvidia,enable-input = ; }; - }; - }; - - serial@0,70006000 { - /* Debug connector on the bottom of the board near SD card. */ - status = "okay"; - }; - - pwm@0,7000a000 { - status = "okay"; - }; - - i2c@0,7000c000 { - status = "okay"; - clock-frequency = <100000>; - - acodec: audio-codec@10 { - compatible = "maxim,max98090"; - reg = <0x10>; - interrupt-parent = <&gpio>; - interrupts = ; - }; - - temperature-sensor@4c { - compatible = "ti,tmp451"; - reg = <0x4c>; - interrupt-parent = <&gpio>; - interrupts = ; - - #thermal-sensor-cells = <1>; - }; - }; - - i2c@0,7000c400 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@0,7000c500 { - status = "okay"; - clock-frequency = <400000>; - - tpm@20 { - compatible = "infineon,slb9645tt"; - reg = <0x20>; - }; - }; - - hdmi_ddc: i2c@0,7000c700 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@0,7000d000 { - status = "okay"; - clock-frequency = <400000>; - - pmic: pmic@40 { - compatible = "ams,as3722"; - reg = <0x40>; - interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; - - ams,system-power-controller; - - #interrupt-cells = <2>; - interrupt-controller; - - gpio-controller; - #gpio-cells = <2>; - - pinctrl-names = "default"; - pinctrl-0 = <&as3722_default>; - - as3722_default: pinmux { - gpio0 { - pins = "gpio0"; - function = "gpio"; - bias-pull-down; - }; - - gpio1 { - pins = "gpio1"; - function = "gpio"; - bias-pull-up; - }; - - gpio2_4_7 { - pins = "gpio2", "gpio4", "gpio7"; - function = "gpio"; - bias-pull-up; - }; - - gpio3_6 { - pins = "gpio3", "gpio6"; - bias-high-impedance; - }; - - gpio5 { - pins = "gpio5"; - function = "clk32k-out"; - bias-pull-down; - }; + kb_col5_pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; - - regulators { - vsup-sd2-supply = <&vdd_5v0_sys>; - vsup-sd3-supply = <&vdd_5v0_sys>; - vsup-sd4-supply = <&vdd_5v0_sys>; - vsup-sd5-supply = <&vdd_5v0_sys>; - vin-ldo0-supply = <&vdd_1v35_lp0>; - vin-ldo1-6-supply = <&vdd_3v3_run>; - vin-ldo2-5-7-supply = <&vddio_1v8>; - vin-ldo3-4-supply = <&vdd_3v3_sys>; - vin-ldo9-10-supply = <&vdd_5v0_sys>; - vin-ldo11-supply = <&vdd_3v3_run>; - - sd0 { - regulator-name = "+VDD_CPU_AP"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1350000>; - regulator-min-microamp = <3500000>; - regulator-max-microamp = <3500000>; - regulator-always-on; - regulator-boot-on; - ams,ext-control = <2>; - }; - - sd1 { - regulator-name = "+VDD_CORE"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1350000>; - regulator-min-microamp = <2500000>; - regulator-max-microamp = <4000000>; - regulator-always-on; - regulator-boot-on; - ams,ext-control = <1>; - }; - - vdd_1v35_lp0: sd2 { - regulator-name = "+1.35V_LP0(sd2)"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - sd3 { - regulator-name = "+1.35V_LP0(sd3)"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_1v05_run: sd4 { - regulator-name = "+1.05V_RUN"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - vddio_1v8: sd5 { - regulator-name = "+1.8V_VDDIO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - sd6 { - regulator-name = "+VDD_GPU_AP"; - regulator-min-microvolt = <650000>; - regulator-max-microvolt = <1200000>; - regulator-min-microamp = <3500000>; - regulator-max-microamp = <3500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo0 { - regulator-name = "+1.05V_RUN_AVDD"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - regulator-boot-on; - regulator-always-on; - ams,ext-control = <1>; - }; - - ldo1 { - regulator-name = "+1.8V_RUN_CAM"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo2 { - regulator-name = "+1.2V_GEN_AVDD"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo3 { - regulator-name = "+1.00V_LP0_VDD_RTC"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-boot-on; - regulator-always-on; - ams,enable-tracking; - }; - - vdd_run_cam: ldo4 { - regulator-name = "+3.3V_RUN_CAM"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo5 { - regulator-name = "+1.2V_RUN_CAM_FRONT"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - vddio_sdmmc3: ldo6 { - regulator-name = "+VDDIO_SDMMC3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - ldo7 { - regulator-name = "+1.05V_RUN_CAM_REAR"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - ldo9 { - regulator-name = "+2.8V_RUN_TOUCH"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo10 { - regulator-name = "+2.8V_RUN_CAM_AF"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo11 { - regulator-name = "+1.8V_RUN_VPP_FUSE"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; + kb_col6_pq6 { + nvidia,pins = "kb_col6_pq6"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; - }; - }; - - spi@0,7000d400 { - status = "okay"; - - cros_ec: cros-ec@0 { - compatible = "google,cros-ec-spi"; - spi-max-frequency = <3000000>; - interrupt-parent = <&gpio>; - interrupts = ; - reg = <0>; - - google,cros-ec-spi-msg-delay = <2000>; - - i2c-tunnel { - compatible = "google,cros-ec-i2c-tunnel"; - #address-cells = <1>; - #size-cells = <0>; - - google,remote-bus = <0>; - - charger: bq24735@9 { - compatible = "ti,bq24735"; - reg = <0x9>; - interrupt-parent = <&gpio>; - interrupts = ; - ti,ac-detect-gpios = <&gpio - TEGRA_GPIO(J, 0) - GPIO_ACTIVE_HIGH>; - }; - - battery: sbs-battery@b { - compatible = "sbs,sbs-battery"; - reg = <0xb>; - sbs,i2c-retry-count = <2>; - sbs,poll-retry-count = <10>; - power-supplies = <&charger>; - }; + kb_col7_pq7 { + nvidia,pins = "kb_col7_pq7"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row0_pr0 { + nvidia,pins = "kb_row0_pr0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row1_pr1 { + nvidia,pins = "kb_row1_pr1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row2_pr2 { + nvidia,pins = "kb_row2_pr2"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row3_pr3 { + nvidia,pins = "kb_row3_pr3"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row4_pr4 { + nvidia,pins = "kb_row4_pr4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row5_pr5 { + nvidia,pins = "kb_row5_pr5"; + nvidia,function = "rsvd3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row6_pr6 { + nvidia,pins = "kb_row6_pr6"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row7_pr7 { + nvidia,pins = "kb_row7_pr7"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row8_ps0 { + nvidia,pins = "kb_row8_ps0"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row11_ps3 { + nvidia,pins = "kb_row11_ps3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row12_ps4 { + nvidia,pins = "kb_row12_ps4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row13_ps5 { + nvidia,pins = "kb_row13_ps5"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row14_ps6 { + nvidia,pins = "kb_row14_ps6"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row15_ps7 { + nvidia,pins = "kb_row15_ps7"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row16_pt0 { + nvidia,pins = "kb_row16_pt0"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row17_pt1 { + nvidia,pins = "kb_row17_pt1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5"; + nvidia,function = "i2c2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + gen2_i2c_sda_pt6 { + nvidia,pins = "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu0 { + nvidia,pins = "pu0"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu1 { + nvidia,pins = "pu1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu2 { + nvidia,pins = "pu2"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu3 { + nvidia,pins = "pu3"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu4 { + nvidia,pins = "pu4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu5 { + nvidia,pins = "pu5"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu6 { + nvidia,pins = "pu6"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pv0 { + nvidia,pins = "pv0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pv1 { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_cd_n_pv2 { + nvidia,pins = "sdmmc3_cd_n_pv2"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1_wp_n_pv3 { + nvidia,pins = "sdmmc1_wp_n_pv3"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4"; + nvidia,function = "i2c4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,rcv-sel = ; + }; + ddc_sda_pv5 { + nvidia,pins = "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,rcv-sel = ; + }; + gpio_w2_aud_pw2 { + nvidia,pins = "gpio_w2_aud_pw2"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gpio_w3_aud_pw3 { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap_mclk1_pw4 { + nvidia,pins = "dap_mclk1_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk2_out_pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart3_txd_pw6 { + nvidia,pins = "uart3_txd_pw6"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart3_rxd_pw7 { + nvidia,pins = "uart3_rxd_pw7"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0"; + nvidia,function = "cldvfs"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gpio_x1_aud_px1 { + nvidia,pins = "gpio_x1_aud_px1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dvfs_clk_px2 { + nvidia,pins = "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gpio_x3_aud_px3 { + nvidia,pins = "gpio_x3_aud_px3"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gpio_x4_aud_px4 { + nvidia,pins = "gpio_x4_aud_px4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gpio_x5_aud_px5 { + nvidia,pins = "gpio_x5_aud_px5"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gpio_x6_aud_px6 { + nvidia,pins = "gpio_x6_aud_px6"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gpio_x7_aud_px7 { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_nxt_py2 { + nvidia,pins = "ulpi_nxt_py2"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_stp_py3 { + nvidia,pins = "ulpi_stp_py3"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1_dat3_py4 { + nvidia,pins = "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1_dat2_py5 { + nvidia,pins = "sdmmc1_dat2_py5"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1_dat1_py6 { + nvidia,pins = "sdmmc1_dat1_py6"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1_dat0_py7 { + nvidia,pins = "sdmmc1_dat0_py7"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6"; + nvidia,function = "i2cpwr"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pwr_i2c_sda_pz7 { + nvidia,pins = "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_dat1_paa1 { + nvidia,pins = "sdmmc4_dat1_paa1"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_dat2_paa2 { + nvidia,pins = "sdmmc4_dat2_paa2"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_dat3_paa3 { + nvidia,pins = "sdmmc4_dat3_paa3"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_dat4_paa4 { + nvidia,pins = "sdmmc4_dat4_paa4"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_dat5_paa5 { + nvidia,pins = "sdmmc4_dat5_paa5"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_dat6_paa6 { + nvidia,pins = "sdmmc4_dat6_paa6"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_dat7_paa7 { + nvidia,pins = "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb0 { + nvidia,pins = "pbb0"; + nvidia,function = "vgp6"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1"; + nvidia,function = "rsvd3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + cam_i2c_sda_pbb2 { + nvidia,pins = "cam_i2c_sda_pbb2"; + nvidia,function = "rsvd3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pbb3 { + nvidia,pins = "pbb3"; + nvidia,function = "vgp3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb4 { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb5 { + nvidia,pins = "pbb5"; + nvidia,function = "rsvd3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb6 { + nvidia,pins = "pbb6"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb7 { + nvidia,pins = "pbb7"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + cam_mclk_pcc0 { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pcc1 { + nvidia,pins = "pcc1"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pcc2 { + nvidia,pins = "pcc2"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk2_req_pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex_l0_rst_n_pdd1 { + nvidia,pins = "pex_l0_rst_n_pdd1"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex_l0_clkreq_n_pdd2 { + nvidia,pins = "pex_l0_clkreq_n_pdd2"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex_wake_n_pdd3 { + nvidia,pins = "pex_wake_n_pdd3"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex_l1_rst_n_pdd5 { + nvidia,pins = "pex_l1_rst_n_pdd5"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex_l1_clkreq_n_pdd6 { + nvidia,pins = "pex_l1_clkreq_n_pdd6"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk3_req_pee1 { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap_mclk1_req_pee2 { + nvidia,pins = "dap_mclk1_req_pee2"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + sdmmc3_clk_lb_out_pee4 { + nvidia,pins = "sdmmc3_clk_lb_out_pee4"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_clk_lb_in_pee5 { + nvidia,pins = "sdmmc3_clk_lb_in_pee5"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dp_hpd_pff0 { + nvidia,pins = "dp_hpd_pff0"; + nvidia,function = "dp"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + usb_vbus_en2_pff1 { + nvidia,pins = "usb_vbus_en2_pff1"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pff2 { + nvidia,pins = "pff2"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + owr { + nvidia,pins = "owr"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,rcv-sel = ; + }; + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "rtck"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; }; }; - - spi@0,7000da00 { - status = "okay"; - spi-max-frequency = <25000000>; - - flash@0 { - compatible = "winbond,w25q32dw"; - reg = <0>; - }; - }; - - pmc@0,7000e400 { - nvidia,invert-interrupt; - nvidia,suspend-mode = <0>; - nvidia,cpu-pwr-good-time = <500>; - nvidia,cpu-pwr-off-time = <300>; - nvidia,core-pwr-good-time = <641 3845>; - nvidia,core-pwr-off-time = <61036>; - nvidia,core-power-req-active-high; - nvidia,sys-clock-req-active-high; - }; - - hda@0,70030000 { - status = "okay"; - }; - - sdhci@0,700b0000 { /* WiFi/BT on this bus */ - status = "okay"; - power-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>; - bus-width = <4>; - no-1-8-v; - non-removable; - }; - - sdhci@0,700b0400 { /* SD Card on this bus */ - status = "okay"; - cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; - power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; - wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; - bus-width = <4>; - no-1-8-v; - vqmmc-supply = <&vddio_sdmmc3>; - }; - - sdhci@0,700b0600 { /* eMMC on this bus */ - status = "okay"; - bus-width = <8>; - no-1-8-v; - non-removable; - }; - - ahub@0,70300000 { - i2s@0,70301100 { - status = "okay"; - }; - }; - - usb@0,7d000000 { /* Rear external USB port. */ - status = "okay"; - }; - - usb-phy@0,7d000000 { - status = "okay"; - vbus-supply = <&vdd_usb1_vbus>; - }; - - usb@0,7d004000 { /* Internal webcam. */ - status = "okay"; - }; - - usb-phy@0,7d004000 { - status = "okay"; - vbus-supply = <&vdd_run_cam>; - }; - - usb@0,7d008000 { /* Left external USB port. */ - status = "okay"; - }; - - usb-phy@0,7d008000 { - status = "okay"; - vbus-supply = <&vdd_usb3_vbus>; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - - enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; - power-supply = <&vdd_led>; - pwms = <&pwm 1 1000000>; - - default-brightness-level = <224>; - brightness-levels = - < 0 1 2 3 4 5 6 7 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255 - 256>; - }; - - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - lid { - label = "Lid"; - gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>; - linux,input-type = <5>; - linux,code = ; - debounce-interval = <1>; - gpio-key,wakeup; - }; - - power { - label = "Power"; - gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <30>; - gpio-key,wakeup; - }; - }; - - panel: panel { - compatible = "auo,b133xtn01"; - - backlight = <&backlight>; - ddc-i2c-bus = <&dpaux>; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd_mux: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "+VDD_MUX"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_5v0_sys: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "+5V_SYS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd_mux>; - }; - - vdd_3v3_sys: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "+3.3V_SYS"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd_mux>; - }; - - vdd_3v3_run: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "+3.3V_RUN"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - }; - - vdd_3v3_hdmi: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vdd_3v3_run>; - }; - - vdd_led: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "+VDD_LED"; - gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_mux>; - }; - - vdd_5v0_ts: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "+5V_VDD_TS_SW"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; - - vdd_usb1_vbus: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; - regulator-name = "+5V_USB_HS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - vin-supply = <&vdd_5v0_sys>; - }; - - vdd_usb3_vbus: regulator@8 { - compatible = "regulator-fixed"; - reg = <8>; - regulator-name = "+5V_USB_SS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - vin-supply = <&vdd_5v0_sys>; - }; - - vdd_3v3_panel: regulator@9 { - compatible = "regulator-fixed"; - reg = <9>; - regulator-name = "+3.3V_PANEL"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&pmic 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_run>; - }; - - vdd_3v3_lp0: regulator@10 { - compatible = "regulator-fixed"; - reg = <10>; - regulator-name = "+3.3V_LP0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - /* - * TODO: find a way to wire this up with the USB EHCI - * controllers so that it can be enabled on demand. - */ - regulator-always-on; - gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - }; - - vdd_hdmi_pll: regulator@11 { - compatible = "regulator-fixed"; - reg = <11>; - regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; - vin-supply = <&vdd_1v05_run>; - }; - - vdd_5v0_hdmi: regulator@12 { - compatible = "regulator-fixed"; - reg = <12>; - regulator-name = "+5V_HDMI_CON"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; - }; - - sound { - compatible = "nvidia,tegra-audio-max98090-nyan-big", - "nvidia,tegra-audio-max98090"; - nvidia,model = "Acer Chromebook 13"; - - nvidia,audio-routing = - "Headphones", "HPR", - "Headphones", "HPL", - "Speakers", "SPKR", - "Speakers", "SPKL", - "Mic Jack", "MICBIAS", - "DMICL", "Int Mic", - "DMICR", "Int Mic", - "IN34", "Mic Jack"; - - nvidia,i2s-controller = <&tegra_i2s1>; - nvidia,audio-codec = <&acodec>; - - clocks = <&tegra_car TEGRA124_CLK_PLL_A>, - <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA124_CLK_EXTERN1>; - clock-names = "pll_a", "pll_a_out0", "mclk"; - - nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>; - nvidia,mic-det-gpios = - <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>; - }; }; - -#include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..9ecd108f56cf3b348bda5688aefa7232efe982d7 --- /dev/null +++ b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi @@ -0,0 +1,2049 @@ +/ { + clock@0,60006000 { + emc-timings-1 { + nvidia,ram-code = <1>; + + timing-12750000 { + clock-frequency = <12750000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-20400000 { + clock-frequency = <20400000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-40800000 { + clock-frequency = <40800000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-68000000 { + clock-frequency = <68000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-300000000 { + clock-frequency = <300000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C>; + clock-names = "emc-parent"; + }; + timing-396000000 { + clock-frequency = <396000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M>; + clock-names = "emc-parent"; + }; + /* TODO: Add 528MHz frequency */ + timing-600000000 { + clock-frequency = <600000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>; + clock-names = "emc-parent"; + }; + timing-792000000 { + clock-frequency = <792000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + }; + }; + + emc@0,7001b000 { + emc-timings-1 { + nvidia,ram-code = <1>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000060 + 0x00000000 + 0x00000018 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000007 + 0x0000000f + 0x00000005 + 0x00000005 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000064 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000505 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000007 + 0x00000000 + 0x00000042 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x800001c5 + 0x0000000a + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 + 0x00000005 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x0000009a + 0x00000000 + 0x00000026 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000007 + 0x0000000f + 0x00000006 + 0x00000006 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000005 + 0x00000005 + 0x000000a0 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000505 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x0000000b + 0x00000000 + 0x00000042 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x8000023a + 0x0000000a + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000001 + 0x0000000a + 0x00000000 + 0x00000001 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000134 + 0x00000000 + 0x0000004d + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000008 + 0x0000000f + 0x0000000c + 0x0000000c + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000005 + 0x00000005 + 0x0000013f + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000505 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000015 + 0x00000000 + 0x00000042 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x80000370 + 0x0000000a + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000003 + 0x00000011 + 0x00000000 + 0x00000002 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000202 + 0x00000000 + 0x00000080 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x0000000f + 0x0000000f + 0x00000013 + 0x00000013 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000001 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000213 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000505 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000022 + 0x00000000 + 0x00000042 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x8000050e + 0x0000000a + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000004 + 0x0000001a + 0x00000000 + 0x00000003 + 0x00000001 + 0x00000004 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000001 + 0x00000001 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000304 + 0x00000000 + 0x000000c1 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000018 + 0x0000000f + 0x0000001c + 0x0000001c + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000003 + 0x00000000 + 0x00000005 + 0x00000005 + 0x0000031c + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000505 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000033 + 0x00000000 + 0x00000042 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x80000713 + 0x0000000a + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x0000088d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000009 + 0x00000035 + 0x00000000 + 0x00000007 + 0x00000002 + 0x00000005 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000002 + 0x00000002 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000004 + 0x00000006 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000003 + 0x0000000d + 0x0000000f + 0x00000011 + 0x00000607 + 0x00000000 + 0x00000181 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000032 + 0x0000000f + 0x00000038 + 0x00000038 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000007 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000638 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00090000 + 0x00090000 + 0x00090000 + 0x00090000 + 0x00009000 + 0x00009000 + 0x00009000 + 0x00009000 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000505 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000066 + 0x00000000 + 0x00000100 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000d2b3 + 0x80000d22 + 0x0000000a + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x000008d5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000321>; + nvidia,emc-mrs-wait-cnt = <0x0174000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000000d + 0x0000004c + 0x00000000 + 0x00000009 + 0x00000003 + 0x00000004 + 0x00000008 + 0x00000002 + 0x00000009 + 0x00000003 + 0x00000003 + 0x00000002 + 0x00000002 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000005 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000007 + 0x00020000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000001 + 0x0000000e + 0x00000010 + 0x00000012 + 0x000008e4 + 0x00000000 + 0x00000239 + 0x00000001 + 0x00000008 + 0x00000001 + 0x00000000 + 0x0000004a + 0x0000000e + 0x00000051 + 0x00000200 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000009 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000924 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0x002c00a0 + 0x00008000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00090000 + 0x00090000 + 0x00000000 + 0x00090000 + 0x00090000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00060000 + 0x00060000 + 0x00060000 + 0x00060000 + 0x00006000 + 0x00006000 + 0x00006000 + 0x00006000 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000202 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x51451420 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000096 + 0x00000000 + 0x00000100 + 0x0174000c + 0x00000000 + 0x00000003 + 0x000052a3 + 0x800012d7 + 0x00000009 + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x00000895>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000521>; + nvidia,emc-mrs-wait-cnt = <0x015b000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000012 + 0x00000065 + 0x00000000 + 0x0000000c + 0x00000004 + 0x00000005 + 0x00000008 + 0x00000002 + 0x0000000a + 0x00000004 + 0x00000004 + 0x00000002 + 0x00000002 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000005 + 0x00000002 + 0x00000000 + 0x00000001 + 0x00000008 + 0x00020000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000000f + 0x00000010 + 0x00000012 + 0x00000bd1 + 0x00000000 + 0x000002f4 + 0x00000001 + 0x00000008 + 0x00000001 + 0x00000000 + 0x00000063 + 0x0000000f + 0x0000006b + 0x00000200 + 0x00000004 + 0x00000005 + 0x00000004 + 0x0000000d + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000c11 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0x002c00a0 + 0x00008000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00068000 + 0x00068000 + 0x00000000 + 0x00068000 + 0x00068000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00058000 + 0x00058000 + 0x00058000 + 0x00058000 + 0x00005800 + 0x00005800 + 0x00005800 + 0x00005800 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000202 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x51451420 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x000000c6 + 0x00000000 + 0x00000100 + 0x015b000c + 0x00000000 + 0x00000003 + 0x000052a3 + 0x8000188b + 0x00000009 + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200010>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000b61>; + nvidia,emc-mrs-wait-cnt = <0x0128000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0121113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000001c + 0x0000009a + 0x00000000 + 0x00000013 + 0x00000007 + 0x00000007 + 0x0000000b + 0x00000003 + 0x00000010 + 0x00000007 + 0x00000007 + 0x00000002 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x0000000a + 0x00000002 + 0x00000000 + 0x00000003 + 0x0000000b + 0x00070000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000002 + 0x00000012 + 0x00000016 + 0x00000018 + 0x00001208 + 0x00000000 + 0x00000482 + 0x00000002 + 0x0000000d + 0x00000001 + 0x00000000 + 0x00000096 + 0x00000015 + 0x000000a2 + 0x00000200 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000015 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00001248 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0xe00e00b1 + 0x00008000 + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00040000 + 0x00040000 + 0x00000000 + 0x00040000 + 0x00040000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x00000004 + 0x00000001 + 0x00000005 + 0x00000007 + 0x00000004 + 0x00000006 + 0x00000007 + 0x00000004 + 0x00000004 + 0x00000001 + 0x00000005 + 0x00000007 + 0x00000004 + 0x00000006 + 0x00000007 + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x100002a0 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc085 + 0x00000202 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x51451420 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0606003f + 0x00000000 + 0x00000000 + 0x00000100 + 0x0128000c + 0x00000000 + 0x00000003 + 0x000040a0 + 0x800024a9 + 0x0000000e + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200018>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000d71>; + nvidia,emc-mrs-wait-cnt = <0x00f8000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040000>; + nvidia,emc-xm2dqspadctrl2 = <0x0120113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000025 + 0x000000cc + 0x00000000 + 0x0000001a + 0x00000009 + 0x00000008 + 0x0000000d + 0x00000004 + 0x00000013 + 0x00000009 + 0x00000009 + 0x00000003 + 0x00000002 + 0x00000000 + 0x00000006 + 0x00000006 + 0x0000000b + 0x00000002 + 0x00000000 + 0x00000002 + 0x0000000d + 0x00080000 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000001 + 0x00000014 + 0x00000018 + 0x0000001a + 0x000017e2 + 0x00000000 + 0x000005f8 + 0x00000003 + 0x00000011 + 0x00000001 + 0x00000000 + 0x000000c6 + 0x00000018 + 0x000000d6 + 0x00000200 + 0x00000005 + 0x00000006 + 0x00000005 + 0x0000001d + 0x00000000 + 0x00000008 + 0x00000008 + 0x00001822 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0xe00700b1 + 0x00008000 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0002c000 + 0x0002c000 + 0x00000000 + 0x0002c000 + 0x0002c000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000008 + 0x00000008 + 0x00000005 + 0x00000008 + 0x0000000a + 0x00000008 + 0x0000000a + 0x0000000a + 0x00000008 + 0x00000008 + 0x00000005 + 0x00000008 + 0x0000000a + 0x00000008 + 0x0000000a + 0x0000000a + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x100002a0 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc085 + 0x00000202 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x61861820 + 0x00492492 + 0x00492492 + 0x61861800 + 0x0606003f + 0x00000000 + 0x00000000 + 0x00000100 + 0x00f8000c + 0x00000000 + 0x00000004 + 0x00004080 + 0x80003012 + 0x0000000f + >; + }; + + }; + }; + + memory-controller@0,70019000 { + emc-timings-1 { + nvidia,ram-code = <1>; + + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emem-configuration = < + 0x40040001 + 0x8000000a + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0402 + 0x77e30303 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emem-configuration = < + 0x40020001 + 0x80000012 + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0402 + 0x76230303 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emem-configuration = < + 0xa0000001 + 0x80000017 + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0402 + 0x74a30303 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emem-configuration = < + 0x00000001 + 0x8000001e + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0402 + 0x74230403 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emem-configuration = < + 0x08000001 + 0x80000026 + 0x00000001 + 0x00000001 + 0x00000003 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0403 + 0x73c30504 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emem-configuration = < + 0x01000003 + 0x80000040 + 0x00000001 + 0x00000001 + 0x00000005 + 0x00000002 + 0x00000004 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000004 + 0x00000006 + 0x06040203 + 0x000a0405 + 0x73840a06 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emem-configuration = < + 0x08000004 + 0x80000040 + 0x00000001 + 0x00000002 + 0x00000007 + 0x00000004 + 0x00000005 + 0x00000001 + 0x00000002 + 0x00000007 + 0x00000002 + 0x00000002 + 0x00000004 + 0x00000006 + 0x06040202 + 0x000b0607 + 0x77450e08 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emem-configuration = < + 0x0f000005 + 0x80000040 + 0x00000001 + 0x00000002 + 0x00000009 + 0x00000005 + 0x00000007 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000002 + 0x00000002 + 0x00000004 + 0x00000006 + 0x06040202 + 0x000d0709 + 0x7586120a + 0x70000f03 + 0x001f0000 + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emem-configuration = < + 0x0f000007 + 0x80000040 + 0x00000002 + 0x00000003 + 0x0000000d + 0x00000008 + 0x0000000a + 0x00000001 + 0x00000002 + 0x00000009 + 0x00000002 + 0x00000002 + 0x00000005 + 0x00000006 + 0x06050202 + 0x0010090d + 0x7428180e + 0x70000f03 + 0x001f0000 + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emem-configuration = < + 0x00000009 + 0x80000040 + 0x00000003 + 0x00000004 + 0x0000000e + 0x00000009 + 0x0000000b + 0x00000001 + 0x00000003 + 0x0000000b + 0x00000002 + 0x00000002 + 0x00000005 + 0x00000007 + 0x07050202 + 0x00130b0e + 0x73a91b0f + 0x70000f03 + 0x001f0000 + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emem-configuration = < + 0x0e00000b + 0x80000040 + 0x00000004 + 0x00000005 + 0x00000013 + 0x0000000c + 0x0000000f + 0x00000002 + 0x00000003 + 0x0000000c + 0x00000002 + 0x00000002 + 0x00000006 + 0x00000008 + 0x08060202 + 0x00160d13 + 0x734c2414 + 0x70000f02 + 0x001f0000 + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze.dts b/arch/arm/boot/dts/tegra124-nyan-blaze.dts new file mode 100644 index 0000000000000000000000000000000000000000..0d30c514ffad57300cb54b9652e78caa76c39530 --- /dev/null +++ b/arch/arm/boot/dts/tegra124-nyan-blaze.dts @@ -0,0 +1,1334 @@ +/dts-v1/; + +#include "tegra124-nyan.dtsi" + +#include "tegra124-nyan-blaze-emc.dtsi" + +/ { + model = "HP Chromebook 14"; + compatible = "google,nyan-blaze", "google,nyan", "nvidia,tegra124"; + + panel: panel { + compatible = "samsung,ltn140at29-301"; + + backlight = <&backlight>; + ddc-i2c-bus = <&dpaux>; + }; + + sound { + compatible = "nvidia,tegra-audio-max98090-nyan-blaze", + "nvidia,tegra-audio-max98090-nyan", + "nvidia,tegra-audio-max98090"; + nvidia,model = "GoogleNyanBlaze"; + }; + + pinmux@0,70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_default>; + + pinmux_default: common { + clk_32k_out_pa0 { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap2_fs_pa2 { + nvidia,pins = "dap2_fs_pa2"; + nvidia,function = "i2s1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap2_sclk_pa3 { + nvidia,pins = "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5"; + nvidia,function = "i2s1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pb0 { + nvidia,pins = "pb0"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pb1 { + nvidia,pins = "pb1"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_dat3_pb4 { + nvidia,pins = "sdmmc3_dat3_pb4"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_dat2_pb5 { + nvidia,pins = "sdmmc3_dat2_pb5"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_dat1_pb6 { + nvidia,pins = "sdmmc3_dat1_pb6"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_dat0_pb7 { + nvidia,pins = "sdmmc3_dat0_pb7"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "irda"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "irda"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gen1_i2c_scl_pc4 { + nvidia,pins = "gen1_i2c_scl_pc4"; + nvidia,function = "i2c1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + gen1_i2c_sda_pc5 { + nvidia,pins = "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pc7 { + nvidia,pins = "pc7"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pg0 { + nvidia,pins = "pg0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pg1 { + nvidia,pins = "pg1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pg2 { + nvidia,pins = "pg2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pg3 { + nvidia,pins = "pg3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pg4 { + nvidia,pins = "pg4"; + nvidia,function = "spi4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pg5 { + nvidia,pins = "pg5"; + nvidia,function = "spi4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pg6 { + nvidia,pins = "pg6"; + nvidia,function = "spi4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pg7 { + nvidia,pins = "pg7"; + nvidia,function = "spi4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ph0 { + nvidia,pins = "ph0"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ph1 { + nvidia,pins = "ph1"; + nvidia,function = "pwm1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ph2 { + nvidia,pins = "ph2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ph3 { + nvidia,pins = "ph3"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ph4 { + nvidia,pins = "ph4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ph5 { + nvidia,pins = "ph5"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ph6 { + nvidia,pins = "ph6"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ph7 { + nvidia,pins = "ph7"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pi0 { + nvidia,pins = "pi0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pi1 { + nvidia,pins = "pi1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pi2 { + nvidia,pins = "pi2"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pi3 { + nvidia,pins = "pi3"; + nvidia,function = "spi4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pi4 { + nvidia,pins = "pi4"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pi5 { + nvidia,pins = "pi5"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pi6 { + nvidia,pins = "pi6"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pi7 { + nvidia,pins = "pi7"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pj0 { + nvidia,pins = "pj0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pj2 { + nvidia,pins = "pj2"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart2_cts_n_pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart2_rts_n_pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pj7 { + nvidia,pins = "pj7"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pk0 { + nvidia,pins = "pk0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pk1 { + nvidia,pins = "pk1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pk2 { + nvidia,pins = "pk2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pk3 { + nvidia,pins = "pk3"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pk4 { + nvidia,pins = "pk4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spdif_out_pk5 { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spdif_in_pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pk7 { + nvidia,pins = "pk7"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap1_fs_pn0 { + nvidia,pins = "dap1_fs_pn0"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap1_din_pn1 { + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap1_dout_pn2 { + nvidia,pins = "dap1_dout_pn2"; + nvidia,function = "i2s0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap1_sclk_pn3 { + nvidia,pins = "dap1_sclk_pn3"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4"; + nvidia,function = "usb"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + usb_vbus_en1_pn5 { + nvidia,pins = "usb_vbus_en1_pn5"; + nvidia,function = "usb"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,rcv-sel = ; + }; + ulpi_data7_po0 { + nvidia,pins = "ulpi_data7_po0"; + nvidia,function = "ulpi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data0_po1 { + nvidia,pins = "ulpi_data0_po1"; + nvidia,function = "ulpi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data1_po2 { + nvidia,pins = "ulpi_data1_po2"; + nvidia,function = "ulpi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data2_po3 { + nvidia,pins = "ulpi_data2_po3"; + nvidia,function = "ulpi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data3_po4 { + nvidia,pins = "ulpi_data3_po4"; + nvidia,function = "ulpi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data4_po5 { + nvidia,pins = "ulpi_data4_po5"; + nvidia,function = "ulpi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data5_po6 { + nvidia,pins = "ulpi_data5_po6"; + nvidia,function = "ulpi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data6_po7 { + nvidia,pins = "ulpi_data6_po7"; + nvidia,function = "ulpi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0"; + nvidia,function = "i2s2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap3_din_pp1 { + nvidia,pins = "dap3_din_pp1"; + nvidia,function = "i2s2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap3_dout_pp2 { + nvidia,pins = "dap3_dout_pp2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap3_sclk_pp3 { + nvidia,pins = "dap3_sclk_pp3"; + nvidia,function = "rsvd3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap4_fs_pp4 { + nvidia,pins = "dap4_fs_pp4"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap4_din_pp5 { + nvidia,pins = "dap4_din_pp5"; + nvidia,function = "rsvd3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap4_dout_pp6 { + nvidia,pins = "dap4_dout_pp6"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap4_sclk_pp7 { + nvidia,pins = "dap4_sclk_pp7"; + nvidia,function = "rsvd3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col0_pq0 { + nvidia,pins = "kb_col0_pq0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col1_pq1 { + nvidia,pins = "kb_col1_pq1"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col2_pq2 { + nvidia,pins = "kb_col2_pq2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col3_pq3 { + nvidia,pins = "kb_col3_pq3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col4_pq4 { + nvidia,pins = "kb_col4_pq4"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col5_pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col6_pq6 { + nvidia,pins = "kb_col6_pq6"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col7_pq7 { + nvidia,pins = "kb_col7_pq7"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row0_pr0 { + nvidia,pins = "kb_row0_pr0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row1_pr1 { + nvidia,pins = "kb_row1_pr1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row2_pr2 { + nvidia,pins = "kb_row2_pr2"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row3_pr3 { + nvidia,pins = "kb_row3_pr3"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row4_pr4 { + nvidia,pins = "kb_row4_pr4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row5_pr5 { + nvidia,pins = "kb_row5_pr5"; + nvidia,function = "rsvd3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row6_pr6 { + nvidia,pins = "kb_row6_pr6"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row7_pr7 { + nvidia,pins = "kb_row7_pr7"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row8_ps0 { + nvidia,pins = "kb_row8_ps0"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row11_ps3 { + nvidia,pins = "kb_row11_ps3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row12_ps4 { + nvidia,pins = "kb_row12_ps4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row13_ps5 { + nvidia,pins = "kb_row13_ps5"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row14_ps6 { + nvidia,pins = "kb_row14_ps6"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row15_ps7 { + nvidia,pins = "kb_row15_ps7"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row16_pt0 { + nvidia,pins = "kb_row16_pt0"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row17_pt1 { + nvidia,pins = "kb_row17_pt1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5"; + nvidia,function = "i2c2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + gen2_i2c_sda_pt6 { + nvidia,pins = "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu0 { + nvidia,pins = "pu0"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu1 { + nvidia,pins = "pu1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu2 { + nvidia,pins = "pu2"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu3 { + nvidia,pins = "pu3"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu4 { + nvidia,pins = "pu4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu5 { + nvidia,pins = "pu5"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu6 { + nvidia,pins = "pu6"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pv0 { + nvidia,pins = "pv0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pv1 { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_cd_n_pv2 { + nvidia,pins = "sdmmc3_cd_n_pv2"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1_wp_n_pv3 { + nvidia,pins = "sdmmc1_wp_n_pv3"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4"; + nvidia,function = "i2c4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,rcv-sel = ; + }; + ddc_sda_pv5 { + nvidia,pins = "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,rcv-sel = ; + }; + gpio_w2_aud_pw2 { + nvidia,pins = "gpio_w2_aud_pw2"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gpio_w3_aud_pw3 { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap_mclk1_pw4 { + nvidia,pins = "dap_mclk1_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk2_out_pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart3_txd_pw6 { + nvidia,pins = "uart3_txd_pw6"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart3_rxd_pw7 { + nvidia,pins = "uart3_rxd_pw7"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0"; + nvidia,function = "cldvfs"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gpio_x1_aud_px1 { + nvidia,pins = "gpio_x1_aud_px1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dvfs_clk_px2 { + nvidia,pins = "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gpio_x3_aud_px3 { + nvidia,pins = "gpio_x3_aud_px3"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gpio_x4_aud_px4 { + nvidia,pins = "gpio_x4_aud_px4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gpio_x5_aud_px5 { + nvidia,pins = "gpio_x5_aud_px5"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gpio_x6_aud_px6 { + nvidia,pins = "gpio_x6_aud_px6"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gpio_x7_aud_px7 { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_nxt_py2 { + nvidia,pins = "ulpi_nxt_py2"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_stp_py3 { + nvidia,pins = "ulpi_stp_py3"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1_dat3_py4 { + nvidia,pins = "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1_dat2_py5 { + nvidia,pins = "sdmmc1_dat2_py5"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1_dat1_py6 { + nvidia,pins = "sdmmc1_dat1_py6"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1_dat0_py7 { + nvidia,pins = "sdmmc1_dat0_py7"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6"; + nvidia,function = "i2cpwr"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pwr_i2c_sda_pz7 { + nvidia,pins = "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_dat1_paa1 { + nvidia,pins = "sdmmc4_dat1_paa1"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_dat2_paa2 { + nvidia,pins = "sdmmc4_dat2_paa2"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_dat3_paa3 { + nvidia,pins = "sdmmc4_dat3_paa3"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_dat4_paa4 { + nvidia,pins = "sdmmc4_dat4_paa4"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_dat5_paa5 { + nvidia,pins = "sdmmc4_dat5_paa5"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_dat6_paa6 { + nvidia,pins = "sdmmc4_dat6_paa6"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_dat7_paa7 { + nvidia,pins = "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb0 { + nvidia,pins = "pbb0"; + nvidia,function = "vgp6"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1"; + nvidia,function = "rsvd3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + cam_i2c_sda_pbb2 { + nvidia,pins = "cam_i2c_sda_pbb2"; + nvidia,function = "rsvd3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pbb3 { + nvidia,pins = "pbb3"; + nvidia,function = "vgp3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb4 { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb5 { + nvidia,pins = "pbb5"; + nvidia,function = "rsvd3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb6 { + nvidia,pins = "pbb6"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb7 { + nvidia,pins = "pbb7"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + cam_mclk_pcc0 { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pcc1 { + nvidia,pins = "pcc1"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pcc2 { + nvidia,pins = "pcc2"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk2_req_pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex_l0_rst_n_pdd1 { + nvidia,pins = "pex_l0_rst_n_pdd1"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex_l0_clkreq_n_pdd2 { + nvidia,pins = "pex_l0_clkreq_n_pdd2"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex_wake_n_pdd3 { + nvidia,pins = "pex_wake_n_pdd3"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex_l1_rst_n_pdd5 { + nvidia,pins = "pex_l1_rst_n_pdd5"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex_l1_clkreq_n_pdd6 { + nvidia,pins = "pex_l1_clkreq_n_pdd6"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk3_req_pee1 { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap_mclk1_req_pee2 { + nvidia,pins = "dap_mclk1_req_pee2"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + sdmmc3_clk_lb_out_pee4 { + nvidia,pins = "sdmmc3_clk_lb_out_pee4"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_clk_lb_in_pee5 { + nvidia,pins = "sdmmc3_clk_lb_in_pee5"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dp_hpd_pff0 { + nvidia,pins = "dp_hpd_pff0"; + nvidia,function = "dp"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + usb_vbus_en2_pff1 { + nvidia,pins = "usb_vbus_en2_pff1"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pff2 { + nvidia,pins = "pff2"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + owr { + nvidia,pins = "owr"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,rcv-sel = ; + }; + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "rtck"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..a9aec23e06f2c60a3a1d0bc6cc2846a8380fb548 --- /dev/null +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -0,0 +1,695 @@ +#include +#include "tegra124.dtsi" + +/ { + aliases { + rtc0 = "/i2c@0,7000d000/pmic@40"; + rtc1 = "/rtc@0,7000e000"; + serial0 = &uarta; + }; + + memory { + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + host1x@0,50000000 { + hdmi@0,54280000 { + status = "okay"; + + vdd-supply = <&vdd_3v3_hdmi>; + pll-supply = <&vdd_hdmi_pll>; + hdmi-supply = <&vdd_5v0_hdmi>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + + sor@0,54540000 { + status = "okay"; + + nvidia,dpaux = <&dpaux>; + nvidia,panel = <&panel>; + }; + + dpaux@0,545c0000 { + vdd-supply = <&vdd_3v3_panel>; + status = "okay"; + }; + }; + + serial@0,70006000 { + /* Debug connector on the bottom of the board near SD card. */ + status = "okay"; + }; + + pwm@0,7000a000 { + status = "okay"; + }; + + i2c@0,7000c000 { + status = "okay"; + clock-frequency = <100000>; + + acodec: audio-codec@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpio>; + interrupts = ; + }; + + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + interrupt-parent = <&gpio>; + interrupts = ; + + #thermal-sensor-cells = <1>; + }; + }; + + i2c@0,7000c400 { + status = "okay"; + clock-frequency = <100000>; + + trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + interrupt-parent = <&gpio>; + interrupts = ; + wakeup-source; + }; + }; + + i2c@0,7000c500 { + status = "okay"; + clock-frequency = <400000>; + + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + }; + }; + + hdmi_ddc: i2c@0,7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@0,7000d000 { + status = "okay"; + clock-frequency = <400000>; + + pmic: pmic@40 { + compatible = "ams,as3722"; + reg = <0x40>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + + ams,system-power-controller; + + #interrupt-cells = <2>; + interrupt-controller; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&as3722_default>; + + as3722_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + bias-pull-down; + }; + + gpio1 { + pins = "gpio1"; + function = "gpio"; + bias-pull-up; + }; + + gpio2_4_7 { + pins = "gpio2", "gpio4", "gpio7"; + function = "gpio"; + bias-pull-up; + }; + + gpio3_6 { + pins = "gpio3", "gpio6"; + bias-high-impedance; + }; + + gpio5 { + pins = "gpio5"; + function = "clk32k-out"; + bias-pull-down; + }; + }; + + regulators { + vsup-sd2-supply = <&vdd_5v0_sys>; + vsup-sd3-supply = <&vdd_5v0_sys>; + vsup-sd4-supply = <&vdd_5v0_sys>; + vsup-sd5-supply = <&vdd_5v0_sys>; + vin-ldo0-supply = <&vdd_1v35_lp0>; + vin-ldo1-6-supply = <&vdd_3v3_run>; + vin-ldo2-5-7-supply = <&vddio_1v8>; + vin-ldo3-4-supply = <&vdd_3v3_sys>; + vin-ldo9-10-supply = <&vdd_5v0_sys>; + vin-ldo11-supply = <&vdd_3v3_run>; + + sd0 { + regulator-name = "+VDD_CPU_AP"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-always-on; + regulator-boot-on; + ams,ext-control = <2>; + }; + + sd1 { + regulator-name = "+VDD_CORE"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-min-microamp = <2500000>; + regulator-max-microamp = <4000000>; + regulator-always-on; + regulator-boot-on; + ams,ext-control = <1>; + }; + + vdd_1v35_lp0: sd2 { + regulator-name = "+1.35V_LP0(sd2)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + sd3 { + regulator-name = "+1.35V_LP0(sd3)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v05_run: sd4 { + regulator-name = "+1.05V_RUN"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + vddio_1v8: sd5 { + regulator-name = "+1.8V_VDDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + sd6 { + regulator-name = "+VDD_GPU_AP"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <1200000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo0 { + regulator-name = "+1.05V_RUN_AVDD"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + regulator-always-on; + ams,ext-control = <1>; + }; + + ldo1 { + regulator-name = "+1.8V_RUN_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2 { + regulator-name = "+1.2V_GEN_AVDD"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3 { + regulator-name = "+1.00V_LP0_VDD_RTC"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + ams,enable-tracking; + }; + + vdd_run_cam: ldo4 { + regulator-name = "+3.3V_RUN_CAM"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo5 { + regulator-name = "+1.2V_RUN_CAM_FRONT"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vddio_sdmmc3: ldo6 { + regulator-name = "+VDDIO_SDMMC3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7 { + regulator-name = "+1.05V_RUN_CAM_REAR"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo9 { + regulator-name = "+2.8V_RUN_TOUCH"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo10 { + regulator-name = "+2.8V_RUN_CAM_AF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo11 { + regulator-name = "+1.8V_RUN_VPP_FUSE"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + }; + + spi@0,7000d400 { + status = "okay"; + + cros_ec: cros-ec@0 { + compatible = "google,cros-ec-spi"; + spi-max-frequency = <3000000>; + interrupt-parent = <&gpio>; + interrupts = ; + reg = <0>; + + google,cros-ec-spi-msg-delay = <2000>; + + i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + #address-cells = <1>; + #size-cells = <0>; + + google,remote-bus = <0>; + + charger: bq24735@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + interrupt-parent = <&gpio>; + interrupts = ; + ti,ac-detect-gpios = <&gpio + TEGRA_GPIO(J, 0) + GPIO_ACTIVE_HIGH>; + }; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,i2c-retry-count = <2>; + sbs,poll-retry-count = <10>; + power-supplies = <&charger>; + }; + }; + }; + }; + + spi@0,7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + + flash@0 { + compatible = "winbond,w25q32dw"; + spi-max-frequency = <25000000>; + reg = <0>; + }; + }; + + pmc@0,7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <500>; + nvidia,cpu-pwr-off-time = <300>; + nvidia,core-pwr-good-time = <641 3845>; + nvidia,core-pwr-off-time = <61036>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + }; + + hda@0,70030000 { + status = "okay"; + }; + + sdhci0_pwrseq: sdhci0_pwrseq { + compatible = "mmc-pwrseq-simple"; + + reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; + }; + + sdhci@0,700b0000 { /* WiFi/BT on this bus */ + status = "okay"; + bus-width = <4>; + no-1-8-v; + non-removable; + mmc-pwrseq = <&sdhci0_pwrseq>; + vmmc-supply = <&vdd_3v3_lp0>; + vqmmc-supply = <&vddio_1v8>; + keep-power-in-suspend; + }; + + sdhci@0,700b0400 { /* SD Card on this bus */ + status = "okay"; + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; + bus-width = <4>; + no-1-8-v; + vqmmc-supply = <&vddio_sdmmc3>; + }; + + sdhci@0,700b0600 { /* eMMC on this bus */ + status = "okay"; + bus-width = <8>; + no-1-8-v; + non-removable; + }; + + ahub@0,70300000 { + i2s@0,70301100 { + status = "okay"; + }; + }; + + usb@0,7d000000 { /* Rear external USB port. */ + status = "okay"; + }; + + usb-phy@0,7d000000 { + status = "okay"; + vbus-supply = <&vdd_usb1_vbus>; + }; + + usb@0,7d004000 { /* Internal webcam. */ + status = "okay"; + }; + + usb-phy@0,7d004000 { + status = "okay"; + vbus-supply = <&vdd_run_cam>; + }; + + usb@0,7d008000 { /* Left external USB port. */ + status = "okay"; + }; + + usb-phy@0,7d008000 { + status = "okay"; + vbus-supply = <&vdd_usb3_vbus>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_led>; + pwms = <&pwm 1 1000000>; + + default-brightness-level = <224>; + brightness-levels = + < 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255 + 256>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + lid { + label = "Lid"; + gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>; + linux,input-type = <5>; + linux,code = ; + debounce-interval = <1>; + gpio-key,wakeup; + }; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <30>; + gpio-key,wakeup; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_mux: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "+VDD_MUX"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "+5V_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; + + vdd_3v3_sys: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "+3.3V_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; + + vdd_3v3_run: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "+3.3V_RUN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_3v3_hdmi: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3_run>; + }; + + vdd_led: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "+VDD_LED"; + gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_mux>; + }; + + vdd_5v0_ts: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "+5V_VDD_TS_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_usb1_vbus: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "+5V_USB_HS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_usb3_vbus: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "+5V_USB_SS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_3v3_panel: regulator@9 { + compatible = "regulator-fixed"; + reg = <9>; + regulator-name = "+3.3V_PANEL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pmic 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_run>; + }; + + vdd_3v3_lp0: regulator@10 { + compatible = "regulator-fixed"; + reg = <10>; + regulator-name = "+3.3V_LP0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* + * TODO: find a way to wire this up with the USB EHCI + * controllers so that it can be enabled on demand. + */ + regulator-always-on; + gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_hdmi_pll: regulator@11 { + compatible = "regulator-fixed"; + reg = <11>; + regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; + vin-supply = <&vdd_1v05_run>; + }; + + vdd_5v0_hdmi: regulator@12 { + compatible = "regulator-fixed"; + reg = <12>; + regulator-name = "+5V_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + }; + + sound { + nvidia,audio-routing = + "Headphones", "HPR", + "Headphones", "HPL", + "Speakers", "SPKR", + "Speakers", "SPKL", + "Mic Jack", "MICBIAS", + "DMICL", "Int Mic", + "DMICR", "Int Mic", + "IN34", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&acodec>; + + clocks = <&tegra_car TEGRA124_CLK_PLL_A>, + <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>; + nvidia,mic-det-gpios = + <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +#include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index db85695aa7aa715713e0fa387e92de887565e233..13cc7ca5e031e5f1814697e8ead9546079f6d04e 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -220,6 +220,7 @@ reg = <0x0 0x60006000 0x0 0x1000>; #clock-cells = <1>; #reset-cells = <1>; + nvidia,external-memory-controller = <&emc>; }; flow-controller@0,60007000 { @@ -227,6 +228,17 @@ reg = <0x0 0x60007000 0x0 0x1000>; }; + actmon@0,6000c800 { + compatible = "nvidia,tegra124-actmon"; + reg = <0x0 0x6000c800 0x0 0x400>; + interrupts = ; + clocks = <&tegra_car TEGRA124_CLK_ACTMON>, + <&tegra_car TEGRA124_CLK_EMC>; + clock-names = "actmon", "emc"; + resets = <&tegra_car 119>; + reset-names = "actmon"; + }; + gpio: gpio@0,6000d000 { compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio"; reg = <0x0 0x6000d000 0x0 0x1000>; @@ -582,6 +594,13 @@ #iommu-cells = <1>; }; + emc: emc@0,7001b000 { + compatible = "nvidia,tegra124-emc"; + reg = <0x0 0x7001b000 0x0 0x1000>; + + nvidia,memory-controller = <&mc>; + }; + sata@0,70020000 { compatible = "nvidia,tegra124-ahci"; @@ -807,7 +826,7 @@ <&tegra_car TEGRA124_CLK_PLL_U>, <&tegra_car TEGRA124_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; - resets = <&tegra_car 59>, <&tegra_car 22>; + resets = <&tegra_car 22>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; @@ -819,6 +838,7 @@ nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; + nvidia,has-utmi-pad-registers; status = "disabled"; }; @@ -843,7 +863,7 @@ <&tegra_car TEGRA124_CLK_PLL_U>, <&tegra_car TEGRA124_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; - resets = <&tegra_car 22>, <&tegra_car 22>; + resets = <&tegra_car 58>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; @@ -855,7 +875,6 @@ nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; - nvidia,has-utmi-pad-registers; status = "disabled"; }; @@ -880,7 +899,7 @@ <&tegra_car TEGRA124_CLK_PLL_U>, <&tegra_car TEGRA124_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; - resets = <&tegra_car 58>, <&tegra_car 22>; + resets = <&tegra_car 59>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 6b157eeabcc5c9b07009c4d91a291122b3732887..3dede39344461a26043a93c12914c32d962e4f64 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -62,71 +62,1652 @@ pinctrl-0 = <&state_default>; state_default: pinmux { + clk_32k_out_pa0 { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "blink"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1"; + nvidia,function = "uartc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap2_fs_pa2 { + nvidia,pins = "dap2_fs_pa2"; + nvidia,function = "i2s1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap2_sclk_pa3 { + nvidia,pins = "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5"; + nvidia,function = "i2s1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_a17_pb0 { + nvidia,pins = "gmi_a17_pb0"; + nvidia,function = "spi4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_a18_pb1 { + nvidia,pins = "gmi_a18_pb1"; + nvidia,function = "spi4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_pwr0_pb2 { + nvidia,pins = "lcd_pwr0_pb2"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_pclk_pb3 { + nvidia,pins = "lcd_pclk_pb3"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_dat3_pb4 { + nvidia,pins = "sdmmc3_dat3_pb4"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_dat2_pb5 { + nvidia,pins = "sdmmc3_dat2_pb5"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_dat1_pb6 { + nvidia,pins = "sdmmc3_dat1_pb6"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_dat0_pb7 { + nvidia,pins = "sdmmc3_dat0_pb7"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0"; + nvidia,function = "uartc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_pwr1_pc1 { + nvidia,pins = "lcd_pwr1_pc1"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "uartb"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "uartb"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gen1_i2c_scl_pc4 { + nvidia,pins = "gen1_i2c_scl_pc4"; + nvidia,function = "i2c1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + gen1_i2c_sda_pc5 { + nvidia,pins = "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + lcd_pwr2_pc6 { + nvidia,pins = "lcd_pwr2_pc6"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_wp_n_pc7 { + nvidia,pins = "gmi_wp_n_pc7"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_dat5_pd0 { + nvidia,pins = "sdmmc3_dat5_pd0"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_dat4_pd1 { + nvidia,pins = "sdmmc3_dat4_pd1"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_dc1_pd2 { + nvidia,pins = "lcd_dc1_pd2"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_dat6_pd3 { + nvidia,pins = "sdmmc3_dat6_pd3"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_dat7_pd4 { + nvidia,pins = "sdmmc3_dat7_pd4"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi_d1_pd5 { + nvidia,pins = "vi_d1_pd5"; + nvidia,function = "sdmmc2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi_vsync_pd6 { + nvidia,pins = "vi_vsync_pd6"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi_hsync_pd7 { + nvidia,pins = "vi_hsync_pd7"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d0_pe0 { + nvidia,pins = "lcd_d0_pe0"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d1_pe1 { + nvidia,pins = "lcd_d1_pe1"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d2_pe2 { + nvidia,pins = "lcd_d2_pe2"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d3_pe3 { + nvidia,pins = "lcd_d3_pe3"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d4_pe4 { + nvidia,pins = "lcd_d4_pe4"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d5_pe5 { + nvidia,pins = "lcd_d5_pe5"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d6_pe6 { + nvidia,pins = "lcd_d6_pe6"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d7_pe7 { + nvidia,pins = "lcd_d7_pe7"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d8_pf0 { + nvidia,pins = "lcd_d8_pf0"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d9_pf1 { + nvidia,pins = "lcd_d9_pf1"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d10_pf2 { + nvidia,pins = "lcd_d10_pf2"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d11_pf3 { + nvidia,pins = "lcd_d11_pf3"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d12_pf4 { + nvidia,pins = "lcd_d12_pf4"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d13_pf5 { + nvidia,pins = "lcd_d13_pf5"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d14_pf6 { + nvidia,pins = "lcd_d14_pf6"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d15_pf7 { + nvidia,pins = "lcd_d15_pf7"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad0_pg0 { + nvidia,pins = "gmi_ad0_pg0"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad1_pg1 { + nvidia,pins = "gmi_ad1_pg1"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad2_pg2 { + nvidia,pins = "gmi_ad2_pg2"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad3_pg3 { + nvidia,pins = "gmi_ad3_pg3"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad4_pg4 { + nvidia,pins = "gmi_ad4_pg4"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad5_pg5 { + nvidia,pins = "gmi_ad5_pg5"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad6_pg6 { + nvidia,pins = "gmi_ad6_pg6"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad7_pg7 { + nvidia,pins = "gmi_ad7_pg7"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad8_ph0 { + nvidia,pins = "gmi_ad8_ph0"; + nvidia,function = "pwm0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad9_ph1 { + nvidia,pins = "gmi_ad9_ph1"; + nvidia,function = "pwm1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad10_ph2 { + nvidia,pins = "gmi_ad10_ph2"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad11_ph3 { + nvidia,pins = "gmi_ad11_ph3"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad12_ph4 { + nvidia,pins = "gmi_ad12_ph4"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad13_ph5 { + nvidia,pins = "gmi_ad13_ph5"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad14_ph6 { + nvidia,pins = "gmi_ad14_ph6"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_wr_n_pi0 { + nvidia,pins = "gmi_wr_n_pi0"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_oe_n_pi1 { + nvidia,pins = "gmi_oe_n_pi1"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_dqs_pi2 { + nvidia,pins = "gmi_dqs_pi2"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_iordy_pi5 { + nvidia,pins = "gmi_iordy_pi5"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_cs7_n_pi6 { + nvidia,pins = "gmi_cs7_n_pi6"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_wait_pi7 { + nvidia,pins = "gmi_wait_pi7"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_de_pj1 { + nvidia,pins = "lcd_de_pj1"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_hsync_pj3 { + nvidia,pins = "lcd_hsync_pj3"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_vsync_pj4 { + nvidia,pins = "lcd_vsync_pj4"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart2_cts_n_pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart2_rts_n_pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_a16_pj7 { + nvidia,pins = "gmi_a16_pj7"; + nvidia,function = "spi4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_adv_n_pk0 { + nvidia,pins = "gmi_adv_n_pk0"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_clk_pk1 { + nvidia,pins = "gmi_clk_pk1"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_cs2_n_pk3 { + nvidia,pins = "gmi_cs2_n_pk3"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_cs3_n_pk4 { + nvidia,pins = "gmi_cs3_n_pk4"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spdif_out_pk5 { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "spdif"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spdif_in_pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "spdif"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_a19_pk7 { + nvidia,pins = "gmi_a19_pk7"; + nvidia,function = "spi4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi_d2_pl0 { + nvidia,pins = "vi_d2_pl0"; + nvidia,function = "sdmmc2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi_d3_pl1 { + nvidia,pins = "vi_d3_pl1"; + nvidia,function = "sdmmc2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi_d4_pl2 { + nvidia,pins = "vi_d4_pl2"; + nvidia,function = "vi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi_d5_pl3 { + nvidia,pins = "vi_d5_pl3"; + nvidia,function = "sdmmc2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi_d6_pl4 { + nvidia,pins = "vi_d6_pl4"; + nvidia,function = "vi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi_d7_pl5 { + nvidia,pins = "vi_d7_pl5"; + nvidia,function = "sdmmc2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi_d8_pl6 { + nvidia,pins = "vi_d8_pl6"; + nvidia,function = "sdmmc2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi_d9_pl7 { + nvidia,pins = "vi_d9_pl7"; + nvidia,function = "sdmmc2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d16_pm0 { + nvidia,pins = "lcd_d16_pm0"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d17_pm1 { + nvidia,pins = "lcd_d17_pm1"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d18_pm2 { + nvidia,pins = "lcd_d18_pm2"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d19_pm3 { + nvidia,pins = "lcd_d19_pm3"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d20_pm4 { + nvidia,pins = "lcd_d20_pm4"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d21_pm5 { + nvidia,pins = "lcd_d21_pm5"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d22_pm6 { + nvidia,pins = "lcd_d22_pm6"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_d23_pm7 { + nvidia,pins = "lcd_d23_pm7"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap1_fs_pn0 { + nvidia,pins = "dap1_fs_pn0"; + nvidia,function = "i2s0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap1_din_pn1 { + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "i2s0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap1_dout_pn2 { + nvidia,pins = "dap1_dout_pn2"; + nvidia,function = "i2s0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap1_sclk_pn3 { + nvidia,pins = "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_cs0_n_pn4 { + nvidia,pins = "lcd_cs0_n_pn4"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_sdout_pn5 { + nvidia,pins = "lcd_sdout_pn5"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_dc0_pn6 { + nvidia,pins = "lcd_dc0_pn6"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data7_po0 { + nvidia,pins = "ulpi_data7_po0"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data0_po1 { + nvidia,pins = "ulpi_data0_po1"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data1_po2 { + nvidia,pins = "ulpi_data1_po2"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data2_po3 { + nvidia,pins = "ulpi_data2_po3"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data3_po4 { + nvidia,pins = "ulpi_data3_po4"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data4_po5 { + nvidia,pins = "ulpi_data4_po5"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data5_po6 { + nvidia,pins = "ulpi_data5_po6"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data6_po7 { + nvidia,pins = "ulpi_data6_po7"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0"; + nvidia,function = "i2s2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap3_din_pp1 { + nvidia,pins = "dap3_din_pp1"; + nvidia,function = "i2s2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap3_dout_pp2 { + nvidia,pins = "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap3_sclk_pp3 { + nvidia,pins = "dap3_sclk_pp3"; + nvidia,function = "i2s2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap4_fs_pp4 { + nvidia,pins = "dap4_fs_pp4"; + nvidia,function = "i2s3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap4_din_pp5 { + nvidia,pins = "dap4_din_pp5"; + nvidia,function = "i2s3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap4_dout_pp6 { + nvidia,pins = "dap4_dout_pp6"; + nvidia,function = "i2s3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap4_sclk_pp7 { + nvidia,pins = "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col0_pq0 { + nvidia,pins = "kb_col0_pq0"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col1_pq1 { + nvidia,pins = "kb_col1_pq1"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col2_pq2 { + nvidia,pins = "kb_col2_pq2"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col3_pq3 { + nvidia,pins = "kb_col3_pq3"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col4_pq4 { + nvidia,pins = "kb_col4_pq4"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col5_pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col6_pq6 { + nvidia,pins = "kb_col6_pq6"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col7_pq7 { + nvidia,pins = "kb_col7_pq7"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row0_pr0 { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row1_pr1 { + nvidia,pins = "kb_row1_pr1"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row2_pr2 { + nvidia,pins = "kb_row2_pr2"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row3_pr3 { + nvidia,pins = "kb_row3_pr3"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row4_pr4 { + nvidia,pins = "kb_row4_pr4"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row5_pr5 { + nvidia,pins = "kb_row5_pr5"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row6_pr6 { + nvidia,pins = "kb_row6_pr6"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row7_pr7 { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row8_ps0 { + nvidia,pins = "kb_row8_ps0"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row11_ps3 { + nvidia,pins = "kb_row11_ps3"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row12_ps4 { + nvidia,pins = "kb_row12_ps4"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row13_ps5 { + nvidia,pins = "kb_row13_ps5"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row14_ps6 { + nvidia,pins = "kb_row14_ps6"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row15_ps7 { + nvidia,pins = "kb_row15_ps7"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi_pclk_pt0 { + nvidia,pins = "vi_pclk_pt0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi_mclk_pt1 { + nvidia,pins = "vi_mclk_pt1"; + nvidia,function = "vi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi_d10_pt2 { + nvidia,pins = "vi_d10_pt2"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi_d11_pt3 { + nvidia,pins = "vi_d11_pt3"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi_d0_pt4 { + nvidia,pins = "vi_d0_pt4"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5"; + nvidia,function = "i2c2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + gen2_i2c_sda_pt6 { + nvidia,pins = "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu0 { + nvidia,pins = "pu0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu1 { + nvidia,pins = "pu1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu2 { + nvidia,pins = "pu2"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu3 { + nvidia,pins = "pu3"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu4 { + nvidia,pins = "pu4"; + nvidia,function = "pwm1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu5 { + nvidia,pins = "pu5"; + nvidia,function = "pwm2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu6 { + nvidia,pins = "pu6"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + jtag_rtck_pu7 { + nvidia,pins = "jtag_rtck_pu7"; + nvidia,function = "rtck"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pv2 { + nvidia,pins = "pv2"; + nvidia,function = "owr"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pv3 { + nvidia,pins = "pv3"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4"; + nvidia,function = "i2c4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ddc_sda_pv5 { + nvidia,pins = "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + crt_hsync_pv6 { + nvidia,pins = "crt_hsync_pv6"; + nvidia,function = "crt"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + crt_vsync_pv7 { + nvidia,pins = "crt_vsync_pv7"; + nvidia,function = "crt"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_cs1_n_pw0 { + nvidia,pins = "lcd_cs1_n_pw0"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_m1_pw1 { + nvidia,pins = "lcd_m1_pw1"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spi2_cs1_n_pw2 { + nvidia,pins = "spi2_cs1_n_pw2"; + nvidia,function = "spi2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk1_out_pw4 { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk2_out_pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart3_txd_pw6 { + nvidia,pins = "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart3_rxd_pw7 { + nvidia,pins = "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spi2_sck_px2 { + nvidia,pins = "spi2_sck_px2"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spi1_mosi_px4 { + nvidia,pins = "spi1_mosi_px4"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spi1_sck_px5 { + nvidia,pins = "spi1_sck_px5"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spi1_cs0_n_px6 { + nvidia,pins = "spi1_cs0_n_px6"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spi1_miso_px7 { + nvidia,pins = "spi1_miso_px7"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0"; + nvidia,function = "uartd"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "uartd"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_nxt_py2 { + nvidia,pins = "ulpi_nxt_py2"; + nvidia,function = "uartd"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_stp_py3 { + nvidia,pins = "ulpi_stp_py3"; + nvidia,function = "uartd"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1_dat3_py4 { + nvidia,pins = "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1_dat2_py5 { + nvidia,pins = "sdmmc1_dat2_py5"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1_dat1_py6 { + nvidia,pins = "sdmmc1_dat1_py6"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1_dat0_py7 { + nvidia,pins = "sdmmc1_dat0_py7"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; sdmmc1_clk_pz0 { nvidia,pins = "sdmmc1_clk_pz0"; nvidia,function = "sdmmc1"; nvidia,pull = ; nvidia,tristate = ; + nvidia,enable-input = ; }; sdmmc1_cmd_pz1 { - nvidia,pins = "sdmmc1_cmd_pz1", - "sdmmc1_dat0_py7", - "sdmmc1_dat1_py6", - "sdmmc1_dat2_py5", - "sdmmc1_dat3_py4"; + nvidia,pins = "sdmmc1_cmd_pz1"; nvidia,function = "sdmmc1"; nvidia,pull = ; nvidia,tristate = ; + nvidia,enable-input = ; }; - sdmmc3_clk_pa6 { - nvidia,pins = "sdmmc3_clk_pa6"; - nvidia,function = "sdmmc3"; + lcd_sdin_pz2 { + nvidia,pins = "lcd_sdin_pz2"; + nvidia,function = "displaya"; nvidia,pull = ; nvidia,tristate = ; + nvidia,enable-input = ; }; - sdmmc3_cmd_pa7 { - nvidia,pins = "sdmmc3_cmd_pa7", - "sdmmc3_dat0_pb7", - "sdmmc3_dat1_pb6", - "sdmmc3_dat2_pb5", - "sdmmc3_dat3_pb4"; - nvidia,function = "sdmmc3"; - nvidia,pull = ; + lcd_wr_n_pz3 { + nvidia,pins = "lcd_wr_n_pz3"; + nvidia,function = "displaya"; + nvidia,pull = ; nvidia,tristate = ; + nvidia,enable-input = ; }; - sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4", - "sdmmc4_rst_n_pcc3"; - nvidia,function = "sdmmc4"; + lcd_sck_pz4 { + nvidia,pins = "lcd_sck_pz4"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sys_clk_req_pz5 { + nvidia,pins = "sys_clk_req_pz5"; + nvidia,function = "sysclk"; nvidia,pull = ; nvidia,tristate = ; + nvidia,enable-input = ; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6"; + nvidia,function = "i2cpwr"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pwr_i2c_sda_pz7 { + nvidia,pins = "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; }; sdmmc4_dat0_paa0 { - nvidia,pins = "sdmmc4_dat0_paa0", - "sdmmc4_dat1_paa1", - "sdmmc4_dat2_paa2", - "sdmmc4_dat3_paa3", - "sdmmc4_dat4_paa4", - "sdmmc4_dat5_paa5", - "sdmmc4_dat6_paa6", - "sdmmc4_dat7_paa7"; + nvidia,pins = "sdmmc4_dat0_paa0"; nvidia,function = "sdmmc4"; nvidia,pull = ; nvidia,tristate = ; + nvidia,enable-input = ; }; - dap2_fs_pa2 { - nvidia,pins = "dap2_fs_pa2", - "dap2_sclk_pa3", - "dap2_din_pa4", - "dap2_dout_pa5"; - nvidia,function = "i2s1"; + sdmmc4_dat1_paa1 { + nvidia,pins = "sdmmc4_dat1_paa1"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_dat2_paa2 { + nvidia,pins = "sdmmc4_dat2_paa2"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_dat3_paa3 { + nvidia,pins = "sdmmc4_dat3_paa3"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_dat4_paa4 { + nvidia,pins = "sdmmc4_dat4_paa4"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_dat5_paa5 { + nvidia,pins = "sdmmc4_dat5_paa5"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_dat6_paa6 { + nvidia,pins = "sdmmc4_dat6_paa6"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_dat7_paa7 { + nvidia,pins = "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb0 { + nvidia,pins = "pbb0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1"; + nvidia,function = "i2c3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + cam_i2c_sda_pbb2 { + nvidia,pins = "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pbb3 { + nvidia,pins = "pbb3"; + nvidia,function = "vgp3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb4 { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb5 { + nvidia,pins = "pbb5"; + nvidia,function = "vgp5"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb6 { + nvidia,pins = "pbb6"; + nvidia,function = "vgp6"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb7 { + nvidia,pins = "pbb7"; + nvidia,function = "i2s4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + cam_mclk_pcc0 { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi_alt3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pcc1 { + nvidia,pins = "pcc1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pcc2 { + nvidia,pins = "pcc2"; + nvidia,function = "i2s4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_rst_n_pcc3 { + nvidia,pins = "sdmmc4_rst_n_pcc3"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk2_req_pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "dap"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex_l2_rst_n_pcc6 { + nvidia,pins = "pex_l2_rst_n_pcc6"; + nvidia,function = "pcie"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex_l2_clkreq_n_pcc7 { + nvidia,pins = "pex_l2_clkreq_n_pcc7"; + nvidia,function = "pcie"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex_l0_prsnt_n_pdd0 { + nvidia,pins = "pex_l0_prsnt_n_pdd0"; + nvidia,function = "pcie"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex_l0_rst_n_pdd1 { + nvidia,pins = "pex_l0_rst_n_pdd1"; + nvidia,function = "pcie"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex_l0_clkreq_n_pdd2 { + nvidia,pins = "pex_l0_clkreq_n_pdd2"; + nvidia,function = "pcie"; nvidia,pull = ; nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex_wake_n_pdd3 { + nvidia,pins = "pex_wake_n_pdd3"; + nvidia,function = "pcie"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; pex_l1_prsnt_n_pdd4 { - nvidia,pins = "pex_l1_prsnt_n_pdd4", - "pex_l1_clkreq_n_pdd6"; + nvidia,pins = "pex_l1_prsnt_n_pdd4"; + nvidia,function = "pcie"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex_l1_rst_n_pdd5 { + nvidia,pins = "pex_l1_rst_n_pdd5"; + nvidia,function = "pcie"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex_l1_clkreq_n_pdd6 { + nvidia,pins = "pex_l1_clkreq_n_pdd6"; + nvidia,function = "pcie"; nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex_l2_prsnt_n_pdd7 { + nvidia,pins = "pex_l2_prsnt_n_pdd7"; + nvidia,function = "pcie"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk3_req_pee1 { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "dev3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk1_req_pee2 { + nvidia,pins = "clk1_req_pee2"; + nvidia,function = "dap"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + owr { + nvidia,pins = "owr"; + nvidia,function = "owr"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; }; sdio3 { nvidia,pins = "drive_sdio3"; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 33920df036401a76c2a821089b3d093c4967a67e..107395c32d8265863fecb711311def376ab500b6 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -191,6 +191,7 @@ compatible = "arm,cortex-a15-pmu"; interrupts = <0 68 4>, <0 69 4>; + interrupt-affinity = <&cpu0>, <&cpu1>; }; oscclk6a: oscclk6a { @@ -362,7 +363,6 @@ compatible = "arm,coresight-etb10", "arm,primecell"; reg = <0 0x20010000 0 0x1000>; - coresight-default-sink; clocks = <&oscclk6a>; clock-names = "apb_pclk"; port { diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index 23662b5a5e9d84554f34eb0fc3edad1ef029f4e6..d949facba37641b3b36f337cd3eefce7932280d9 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -33,28 +33,28 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + A9_0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; next-level-cache = <&L2>; }; - cpu@1 { + A9_1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; next-level-cache = <&L2>; }; - cpu@2 { + A9_2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; next-level-cache = <&L2>; }; - cpu@3 { + A9_3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; @@ -170,6 +170,7 @@ compatible = "arm,pl310-cache"; reg = <0x1e00a000 0x1000>; interrupts = <0 43 4>; + cache-unified; cache-level = <2>; arm,data-latency = <1 1 1>; arm,tag-latency = <1 1 1>; @@ -181,6 +182,8 @@ <0 61 4>, <0 62 4>, <0 63 4>; + interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>; + }; dcc { diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi index 36cafbfa1bfacd58bd9e6ebbfeaf8a18c23ff018..606753eb72c8f67d9551b19bfed61137b2ab07c2 100644 --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -12,6 +12,12 @@ bootargs = "console=ttyLP0,115200"; }; + clk16m: clk16m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -47,6 +53,21 @@ status = "okay"; }; +&dspi1 { + status = "okay"; + + mcp2515can: can@0 { + compatible = "microchip,mcp2515"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_int>; + reg = <0>; + clocks = <&clk16m>; + spi-max-frequency = <10000000>; + interrupt-parent = <&gpio1>; + interrupts = <11 GPIO_ACTIVE_LOW>; + }; +}; + &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; @@ -94,3 +115,13 @@ &usbh1 { vbus-supply = <&usbh_vbus_reg>; }; + +&iomuxc { + vf610-colibri { + pinctrl_can_int: can_int { + fsl,pins = < + VF610_PAD_PTB21__GPIO_43 0x22ed + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index 5c2b7320856dc0efc49c12cf7ff5575bf94a05dc..fbef0828e9303ca54d3a2304b0d4b2cf26bea417 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -23,6 +23,12 @@ status = "okay"; }; +&dspi1 { + bus-num = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi1>; +}; + &edma0 { status = "okay"; }; @@ -107,6 +113,15 @@ >; }; + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x33e2 + VF610_PAD_PTD6__DSPI1_SIN 0x33e1 + VF610_PAD_PTD7__DSPI1_SOUT 0x33e2 + VF610_PAD_PTD8__DSPI1_SCK 0x33e2 + >; + }; + pinctrl_esdhc1: esdhc1grp { fsl,pins = < VF610_PAD_PTA24__ESDHC1_CLK 0x31ef diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi index 1dbf8d2d1ddf50e034b337a64b6f74b4f868fd55..e976d2fa15274239b9ed2b0568cb9bd9ba9b2aa6 100644 --- a/arch/arm/boot/dts/vf500.dtsi +++ b/arch/arm/boot/dts/vf500.dtsi @@ -24,14 +24,13 @@ }; soc { - interrupt-parent = <&intc>; - aips-bus@40000000 { intc: interrupt-controller@40002000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; + interrupt-parent = <&intc>; reg = <0x40003000 0x1000>, <0x40002100 0x100>; }; @@ -40,145 +39,17 @@ compatible = "arm,cortex-a9-global-timer"; reg = <0x40002200 0x20>; interrupts = ; + interrupt-parent = <&intc>; clocks = <&clks VF610_CLK_PLATFORM_BUS>; }; }; }; }; -&adc0 { - interrupts = ; -}; - -&adc1 { - interrupts = ; -}; - -&can0 { - interrupts = ; -}; - -&can1 { - interrupts = ; -}; - -&dspi0 { - interrupts = ; -}; - -&edma0 { - interrupts = , - ; - interrupt-names = "edma-tx", "edma-err"; -}; - -&edma1 { - interrupts = , - ; - interrupt-names = "edma-tx", "edma-err"; -}; - -&esdhc1 { - interrupts = ; -}; - -&fec0 { - interrupts = ; -}; - -&fec1 { - interrupts = ; -}; - -&ftm { - interrupts = ; -}; - -&gpio0 { - interrupts = ; -}; - -&gpio1 { - interrupts = ; -}; - -&gpio2 { - interrupts = ; -}; - -&gpio3 { - interrupts = ; -}; - -&gpio4 { - interrupts = ; -}; - -&i2c0 { - interrupts = ; -}; - -&pit { - interrupts = ; -}; - -&qspi0 { - interrupts = ; -}; - -&sai2 { - interrupts = ; -}; - -&snvsrtc { - interrupts = ; -}; - -&src { - interrupts = ; -}; - -&uart0 { - interrupts = ; -}; - -&uart1 { - interrupts = ; -}; - -&uart2 { - interrupts = ; -}; - -&uart3 { - interrupts = ; -}; - -&uart4 { - interrupts = ; -}; - -&uart5 { - interrupts = ; -}; - -&usbdev0 { - interrupts = ; -}; - -&usbh1 { - interrupts = ; -}; - -&usbphy0 { - interrupts = ; -}; - -&usbphy1 { - interrupts = ; +&mscm_ir { + interrupt-parent = <&intc>; }; &wdoga5 { - interrupts = ; status = "okay"; }; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index a29c7ce15eafb2b8bbeffb05f173c752d319d230..4aa335166be76ae7296cbaf455a03af2e872e127 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -54,6 +54,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; + interrupt-parent = <&mscm_ir>; ranges; aips0: aips-bus@40000000 { @@ -62,6 +63,19 @@ #size-cells = <1>; ranges; + mscm_cpucfg: cpucfg@40001000 { + compatible = "fsl,vf610-mscm-cpucfg", "syscon"; + reg = <0x40001000 0x800>; + }; + + mscm_ir: interrupt-controller@40001800 { + compatible = "fsl,vf610-mscm-ir"; + reg = <0x40001800 0x400>; + fsl,cpucfg = <&mscm_cpucfg>; + interrupt-controller; + #interrupt-cells = <2>; + }; + edma0: dma-controller@40018000 { #dma-cells = <2>; compatible = "fsl,vf610-edma"; @@ -69,6 +83,9 @@ <0x40024000 0x1000>, <0x40025000 0x1000>; dma-channels = <32>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>, + <9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma-tx", "edma-err"; clock-names = "dmamux0", "dmamux1"; clocks = <&clks VF610_CLK_DMAMUX0>, <&clks VF610_CLK_DMAMUX1>; @@ -78,6 +95,7 @@ can0: flexcan@40020000 { compatible = "fsl,vf610-flexcan"; reg = <0x40020000 0x4000>; + interrupts = <58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_FLEXCAN0>, <&clks VF610_CLK_FLEXCAN0>; clock-names = "ipg", "per"; @@ -87,6 +105,7 @@ uart0: serial@40027000 { compatible = "fsl,vf610-lpuart"; reg = <0x40027000 0x1000>; + interrupts = <61 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART0>; clock-names = "ipg"; dmas = <&edma0 0 2>, @@ -98,6 +117,7 @@ uart1: serial@40028000 { compatible = "fsl,vf610-lpuart"; reg = <0x40028000 0x1000>; + interrupts = <62 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART1>; clock-names = "ipg"; dmas = <&edma0 0 4>, @@ -109,6 +129,7 @@ uart2: serial@40029000 { compatible = "fsl,vf610-lpuart"; reg = <0x40029000 0x1000>; + interrupts = <63 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART2>; clock-names = "ipg"; dmas = <&edma0 0 6>, @@ -120,6 +141,7 @@ uart3: serial@4002a000 { compatible = "fsl,vf610-lpuart"; reg = <0x4002a000 0x1000>; + interrupts = <64 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART3>; clock-names = "ipg"; dmas = <&edma0 0 8>, @@ -133,15 +155,29 @@ #size-cells = <0>; compatible = "fsl,vf610-dspi"; reg = <0x4002c000 0x1000>; + interrupts = <67 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_DSPI0>; clock-names = "dspi"; spi-num-chipselects = <5>; status = "disabled"; }; + dspi1: dspi1@4002d000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-dspi"; + reg = <0x4002d000 0x1000>; + interrupts = <68 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_DSPI1>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + status = "disabled"; + }; + sai2: sai@40031000 { compatible = "fsl,vf610-sai"; reg = <0x40031000 0x1000>; + interrupts = <86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_SAI2>; clock-names = "sai"; dma-names = "tx", "rx"; @@ -153,6 +189,7 @@ pit: pit@40037000 { compatible = "fsl,vf610-pit"; reg = <0x40037000 0x1000>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_PIT>; clock-names = "pit"; }; @@ -186,6 +223,7 @@ adc0: adc@4003b000 { compatible = "fsl,vf610-adc"; reg = <0x4003b000 0x1000>; + interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_ADC0>; clock-names = "adc"; status = "disabled"; @@ -194,6 +232,7 @@ wdoga5: wdog@4003e000 { compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; reg = <0x4003e000 0x1000>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_WDT>; clock-names = "wdog"; status = "disabled"; @@ -204,6 +243,7 @@ #size-cells = <0>; compatible = "fsl,vf610-qspi"; reg = <0x40044000 0x1000>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_QSPI0_EN>, <&clks VF610_CLK_QSPI0>; clock-names = "qspi_en", "qspi"; @@ -213,7 +253,6 @@ iomuxc: iomuxc@40048000 { compatible = "fsl,vf610-iomuxc"; reg = <0x40048000 0x1000>; - #gpio-range-cells = <3>; }; gpio0: gpio@40049000 { @@ -221,6 +260,7 @@ reg = <0x40049000 0x1000 0x400ff000 0x40>; gpio-controller; #gpio-cells = <2>; + interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 0 32>; @@ -231,6 +271,7 @@ reg = <0x4004a000 0x1000 0x400ff040 0x40>; gpio-controller; #gpio-cells = <2>; + interrupts = <108 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 32 32>; @@ -241,6 +282,7 @@ reg = <0x4004b000 0x1000 0x400ff080 0x40>; gpio-controller; #gpio-cells = <2>; + interrupts = <109 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 64 32>; @@ -251,6 +293,7 @@ reg = <0x4004c000 0x1000 0x400ff0c0 0x40>; gpio-controller; #gpio-cells = <2>; + interrupts = <110 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 96 32>; @@ -261,6 +304,7 @@ reg = <0x4004d000 0x1000 0x400ff100 0x40>; gpio-controller; #gpio-cells = <2>; + interrupts = <111 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 128 7>; @@ -274,6 +318,7 @@ usbphy0: usbphy@40050800 { compatible = "fsl,vf610-usbphy"; reg = <0x40050800 0x400>; + interrupts = <50 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_USBPHY0>; fsl,anatop = <&anatop>; status = "disabled"; @@ -282,6 +327,7 @@ usbphy1: usbphy@40050c00 { compatible = "fsl,vf610-usbphy"; reg = <0x40050c00 0x400>; + interrupts = <51 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_USBPHY1>; fsl,anatop = <&anatop>; status = "disabled"; @@ -292,6 +338,7 @@ #size-cells = <0>; compatible = "fsl,vf610-i2c"; reg = <0x40066000 0x1000>; + interrupts = <71 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_I2C0>; clock-names = "ipg"; dmas = <&edma0 0 50>, @@ -311,6 +358,7 @@ usbdev0: usb@40034000 { compatible = "fsl,vf610-usb", "fsl,imx27-usb"; reg = <0x40034000 0x800>; + interrupts = <75 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_USBC0>; fsl,usbphy = <&usbphy0>; fsl,usbmisc = <&usbmisc0 0>; @@ -329,6 +377,7 @@ src: src@4006e000 { compatible = "fsl,vf610-src", "syscon"; reg = <0x4006e000 0x1000>; + interrupts = <96 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -345,6 +394,9 @@ <0x400a1000 0x1000>, <0x400a2000 0x1000>; dma-channels = <32>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>, + <11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma-tx", "edma-err"; clock-names = "dmamux0", "dmamux1"; clocks = <&clks VF610_CLK_DMAMUX2>, <&clks VF610_CLK_DMAMUX3>; @@ -360,6 +412,7 @@ snvsrtc: snvs-rtc-lp@34 { compatible = "fsl,sec-v4.0-mon-rtc-lp"; reg = <0x34 0x58>; + interrupts = <100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_SNVS>; clock-names = "snvs-rtc"; }; @@ -368,6 +421,7 @@ uart4: serial@400a9000 { compatible = "fsl,vf610-lpuart"; reg = <0x400a9000 0x1000>; + interrupts = <65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART4>; clock-names = "ipg"; status = "disabled"; @@ -376,6 +430,7 @@ uart5: serial@400aa000 { compatible = "fsl,vf610-lpuart"; reg = <0x400aa000 0x1000>; + interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART5>; clock-names = "ipg"; status = "disabled"; @@ -384,6 +439,7 @@ adc1: adc@400bb000 { compatible = "fsl,vf610-adc"; reg = <0x400bb000 0x1000>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_ADC1>; clock-names = "adc"; status = "disabled"; @@ -392,6 +448,7 @@ esdhc1: esdhc@400b2000 { compatible = "fsl,imx53-esdhc"; reg = <0x400b2000 0x1000>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_IPG_BUS>, <&clks VF610_CLK_PLATFORM_BUS>, <&clks VF610_CLK_ESDHC1>; @@ -402,6 +459,7 @@ usbh1: usb@400b4000 { compatible = "fsl,vf610-usb", "fsl,imx27-usb"; reg = <0x400b4000 0x800>; + interrupts = <76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_USBC1>; fsl,usbphy = <&usbphy1>; fsl,usbmisc = <&usbmisc1 0>; @@ -420,6 +478,7 @@ ftm: ftm@400b8000 { compatible = "fsl,ftm-timer"; reg = <0x400b8000 0x1000 0x400b9000 0x1000>; + interrupts = <44 IRQ_TYPE_LEVEL_HIGH>; clock-names = "ftm-evt", "ftm-src", "ftm-evt-counter-en", "ftm-src-counter-en"; clocks = <&clks VF610_CLK_FTM2>, @@ -432,6 +491,7 @@ fec0: ethernet@400d0000 { compatible = "fsl,mvf600-fec"; reg = <0x400d0000 0x1000>; + interrupts = <78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_ENET0>, <&clks VF610_CLK_ENET0>, <&clks VF610_CLK_ENET>; @@ -442,6 +502,7 @@ fec1: ethernet@400d1000 { compatible = "fsl,mvf600-fec"; reg = <0x400d1000 0x1000>; + interrupts = <79 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_ENET1>, <&clks VF610_CLK_ENET1>, <&clks VF610_CLK_ENET>; @@ -452,6 +513,7 @@ can1: flexcan@400d4000 { compatible = "fsl,vf610-flexcan"; reg = <0x400d4000 0x4000>; + interrupts = <59 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_FLEXCAN1>, <&clks VF610_CLK_FLEXCAN1>; clock-names = "ipg", "per"; diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c index 3c165fc2dce284593de47902637e1f7068e8798b..5f8a52ac7edf2c74ba6ba2547df969a6acfdbd87 100644 --- a/arch/arm/common/mcpm_entry.c +++ b/arch/arm/common/mcpm_entry.c @@ -55,22 +55,81 @@ bool mcpm_is_available(void) return (platform_ops) ? true : false; } +/* + * We can't use regular spinlocks. In the switcher case, it is possible + * for an outbound CPU to call power_down() after its inbound counterpart + * is already live using the same logical CPU number which trips lockdep + * debugging. + */ +static arch_spinlock_t mcpm_lock = __ARCH_SPIN_LOCK_UNLOCKED; + +static int mcpm_cpu_use_count[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER]; + +static inline bool mcpm_cluster_unused(unsigned int cluster) +{ + int i, cnt; + for (i = 0, cnt = 0; i < MAX_CPUS_PER_CLUSTER; i++) + cnt |= mcpm_cpu_use_count[cluster][i]; + return !cnt; +} + int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster) { + bool cpu_is_down, cluster_is_down; + int ret = 0; + if (!platform_ops) return -EUNATCH; /* try not to shadow power_up errors */ might_sleep(); - return platform_ops->power_up(cpu, cluster); + + /* backward compatibility callback */ + if (platform_ops->power_up) + return platform_ops->power_up(cpu, cluster); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + + /* + * Since this is called with IRQs enabled, and no arch_spin_lock_irq + * variant exists, we need to disable IRQs manually here. + */ + local_irq_disable(); + arch_spin_lock(&mcpm_lock); + + cpu_is_down = !mcpm_cpu_use_count[cluster][cpu]; + cluster_is_down = mcpm_cluster_unused(cluster); + + mcpm_cpu_use_count[cluster][cpu]++; + /* + * The only possible values are: + * 0 = CPU down + * 1 = CPU (still) up + * 2 = CPU requested to be up before it had a chance + * to actually make itself down. + * Any other value is a bug. + */ + BUG_ON(mcpm_cpu_use_count[cluster][cpu] != 1 && + mcpm_cpu_use_count[cluster][cpu] != 2); + + if (cluster_is_down) + ret = platform_ops->cluster_powerup(cluster); + if (cpu_is_down && !ret) + ret = platform_ops->cpu_powerup(cpu, cluster); + + arch_spin_unlock(&mcpm_lock); + local_irq_enable(); + return ret; } typedef void (*phys_reset_t)(unsigned long); void mcpm_cpu_power_down(void) { + unsigned int mpidr, cpu, cluster; + bool cpu_going_down, last_man; phys_reset_t phys_reset; - if (WARN_ON_ONCE(!platform_ops || !platform_ops->power_down)) - return; + if (WARN_ON_ONCE(!platform_ops)) + return; BUG_ON(!irqs_disabled()); /* @@ -79,28 +138,65 @@ void mcpm_cpu_power_down(void) */ setup_mm_for_reboot(); - platform_ops->power_down(); + /* backward compatibility callback */ + if (platform_ops->power_down) { + platform_ops->power_down(); + goto not_dead; + } + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + + __mcpm_cpu_going_down(cpu, cluster); + arch_spin_lock(&mcpm_lock); + BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); + + mcpm_cpu_use_count[cluster][cpu]--; + BUG_ON(mcpm_cpu_use_count[cluster][cpu] != 0 && + mcpm_cpu_use_count[cluster][cpu] != 1); + cpu_going_down = !mcpm_cpu_use_count[cluster][cpu]; + last_man = mcpm_cluster_unused(cluster); + + if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { + platform_ops->cpu_powerdown_prepare(cpu, cluster); + platform_ops->cluster_powerdown_prepare(cluster); + arch_spin_unlock(&mcpm_lock); + platform_ops->cluster_cache_disable(); + __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); + } else { + if (cpu_going_down) + platform_ops->cpu_powerdown_prepare(cpu, cluster); + arch_spin_unlock(&mcpm_lock); + /* + * If cpu_going_down is false here, that means a power_up + * request raced ahead of us. Even if we do not want to + * shut this CPU down, the caller still expects execution + * to return through the system resume entry path, like + * when the WFI is aborted due to a new IRQ or the like.. + * So let's continue with cache cleaning in all cases. + */ + platform_ops->cpu_cache_disable(); + } + + __mcpm_cpu_down(cpu, cluster); + + /* Now we are prepared for power-down, do it: */ + if (cpu_going_down) + wfi(); + +not_dead: /* * It is possible for a power_up request to happen concurrently * with a power_down request for the same CPU. In this case the - * power_down method might not be able to actually enter a - * powered down state with the WFI instruction if the power_up - * method has removed the required reset condition. The - * power_down method is then allowed to return. We must perform - * a re-entry in the kernel as if the power_up method just had - * deasserted reset on the CPU. - * - * To simplify race issues, the platform specific implementation - * must accommodate for the possibility of unordered calls to - * power_down and power_up with a usage count. Therefore, if a - * call to power_up is issued for a CPU that is not down, then - * the next call to power_down must not attempt a full shutdown - * but only do the minimum (normally disabling L1 cache and CPU - * coherency) and return just as if a concurrent power_up request - * had happened as described above. + * CPU might not be able to actually enter a powered down state + * with the WFI instruction if the power_up request has removed + * the required reset condition. We must perform a re-entry in + * the kernel as if the power_up method just had deasserted reset + * on the CPU. */ - phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); phys_reset(virt_to_phys(mcpm_entry_point)); @@ -125,26 +221,66 @@ int mcpm_wait_for_cpu_powerdown(unsigned int cpu, unsigned int cluster) void mcpm_cpu_suspend(u64 expected_residency) { - phys_reset_t phys_reset; - - if (WARN_ON_ONCE(!platform_ops || !platform_ops->suspend)) + if (WARN_ON_ONCE(!platform_ops)) return; - BUG_ON(!irqs_disabled()); - /* Very similar to mcpm_cpu_power_down() */ - setup_mm_for_reboot(); - platform_ops->suspend(expected_residency); - phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); - phys_reset(virt_to_phys(mcpm_entry_point)); - BUG(); + /* backward compatibility callback */ + if (platform_ops->suspend) { + phys_reset_t phys_reset; + BUG_ON(!irqs_disabled()); + setup_mm_for_reboot(); + platform_ops->suspend(expected_residency); + phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); + phys_reset(virt_to_phys(mcpm_entry_point)); + BUG(); + } + + /* Some platforms might have to enable special resume modes, etc. */ + if (platform_ops->cpu_suspend_prepare) { + unsigned int mpidr = read_cpuid_mpidr(); + unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + arch_spin_lock(&mcpm_lock); + platform_ops->cpu_suspend_prepare(cpu, cluster); + arch_spin_unlock(&mcpm_lock); + } + mcpm_cpu_power_down(); } int mcpm_cpu_powered_up(void) { + unsigned int mpidr, cpu, cluster; + bool cpu_was_down, first_man; + unsigned long flags; + if (!platform_ops) return -EUNATCH; - if (platform_ops->powered_up) + + /* backward compatibility callback */ + if (platform_ops->powered_up) { platform_ops->powered_up(); + return 0; + } + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + local_irq_save(flags); + arch_spin_lock(&mcpm_lock); + + cpu_was_down = !mcpm_cpu_use_count[cluster][cpu]; + first_man = mcpm_cluster_unused(cluster); + + if (first_man && platform_ops->cluster_is_up) + platform_ops->cluster_is_up(cluster); + if (cpu_was_down) + mcpm_cpu_use_count[cluster][cpu] = 1; + if (platform_ops->cpu_is_up) + platform_ops->cpu_is_up(cpu, cluster); + + arch_spin_unlock(&mcpm_lock); + local_irq_restore(flags); + return 0; } @@ -334,8 +470,10 @@ int __init mcpm_sync_init( } mpidr = read_cpuid_mpidr(); this_cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - for_each_online_cpu(i) + for_each_online_cpu(i) { + mcpm_cpu_use_count[this_cluster][i] = 1; mcpm_sync.clusters[this_cluster].cpus[i].cpu = CPU_UP; + } mcpm_sync.clusters[this_cluster].cluster = CLUSTER_UP; sync_cache_w(&mcpm_sync); diff --git a/arch/arm/configs/ape6evm_defconfig b/arch/arm/configs/ape6evm_defconfig deleted file mode 100644 index 9e9a72e3d30faddbca84596d8bb0feae9899d402..0000000000000000000000000000000000000000 --- a/arch/arm/configs/ape6evm_defconfig +++ /dev/null @@ -1,109 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_CGROUPS=y -CONFIG_CGROUP_SCHED=y -CONFIG_KALLSYMS_ALL=y -CONFIG_EMBEDDED=y -CONFIG_PERF_EVENTS=y -CONFIG_SLAB=y -CONFIG_ARCH_SHMOBILE_LEGACY=y -CONFIG_ARCH_R8A73A4=y -CONFIG_MACH_APE6EVM=y -# CONFIG_ARM_THUMB is not set -CONFIG_CPU_BPREDICT_DISABLE=y -CONFIG_PL310_ERRATA_588369=y -CONFIG_ARM_ERRATA_754322=y -CONFIG_SMP=y -CONFIG_SCHED_MC=y -CONFIG_HAVE_ARM_ARCH_TIMER=y -CONFIG_NR_CPUS=8 -CONFIG_AEABI=y -CONFIG_HIGHMEM=y -CONFIG_HIGHPTE=y -# CONFIG_HW_PERF_EVENTS is not set -# CONFIG_COMPACTION is not set -# CONFIG_CROSS_MEMORY_ATTACH is not set -CONFIG_ARM_APPENDED_DTB=y -CONFIG_VFP=y -CONFIG_NEON=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6_SIT is not set -CONFIG_NETFILTER=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_FW_LOADER_USER_HELPER is not set -CONFIG_NETDEVICES=y -# CONFIG_NET_CADENCE is not set -CONFIG_SMC91X=y -CONFIG_SMSC911X=y -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=12 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_SH_MOBILE=y -CONFIG_GPIO_SH_PFC=y -CONFIG_GPIOLIB=y -# CONFIG_HWMON is not set -CONFIG_THERMAL=y -CONFIG_RCAR_THERMAL=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_GPIO=y -CONFIG_REGULATOR_MAX8973=y -# CONFIG_HID is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_MMC=y -CONFIG_MMC_SDHI=y -CONFIG_MMC_SH_MMCIF=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_DMADEVICES=y -CONFIG_SH_DMAE=y -# CONFIG_IOMMU_SUPPORT is not set -# CONFIG_DNOTIFY is not set -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NFS_FS=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFS_V4_1=y -CONFIG_ROOT_NFS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_ENABLE_DEFAULT_TRACERS=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=y -CONFIG_CRYPTO_TWOFISH=y -CONFIG_CRC_CCITT=y -CONFIG_CRC16=y -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=y -CONFIG_CRC7=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 811e72bbe6429b6e6a18ac5c31c267c178d17714..bcef49a21801436dc7f4251c3fa788e17f769a3e 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -13,10 +13,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_MULTI_V4T=y +CONFIG_ARCH_MULTI_V5=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_AT91=y +CONFIG_SOC_SAM_V4_V5=y CONFIG_SOC_AT91RM9200=y CONFIG_SOC_AT91SAM9=y -CONFIG_AT91_TIMER_HZ=128 CONFIG_AEABI=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_ZBOOT_ROM_TEXT=0x0 diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index 0494c8f229a2360fa30646b2683d74de8ee8785c..d590098783127816c95d2140a5769730780cb78d 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -12,7 +12,6 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_FPE_NWFPE=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_ARTHUR=m CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 1d8935359fd0600ba56485a42969acbe3c4a301a..d034c96c039bd054c98eb28f4dc868e2212e53e9 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -26,6 +26,8 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" +CONFIG_CPU_IDLE=y +CONFIG_ARM_EXYNOS_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_PM=y @@ -34,6 +36,14 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_NET_KEY=y CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +CONFIG_MWIFIEX=y +CONFIG_MWIFIEX_SDIO=y CONFIG_RFKILL_REGULATOR=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y @@ -91,9 +101,11 @@ CONFIG_CHARGER_MAX77693=y CONFIG_CHARGER_TPS65090=y CONFIG_HWMON=y CONFIG_SENSORS_LM90=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_THERMAL=y CONFIG_THERMAL=y CONFIG_EXYNOS_THERMAL=y -CONFIG_EXYNOS_THERMAL_CORE=y +CONFIG_THERMAL_EMULATION=y CONFIG_WATCHDOG=y CONFIG_S3C2410_WATCHDOG=y CONFIG_MFD_CROS_EC=y @@ -118,6 +130,7 @@ CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_TPS65090=y CONFIG_DRM=y +CONFIG_DRM_EXYNOS_HDMI=y CONFIG_DRM_BRIDGE=y CONFIG_DRM_PTN3460=y CONFIG_DRM_PS8622=y @@ -171,10 +184,11 @@ CONFIG_RTC_DRV_S5M=y CONFIG_RTC_DRV_S3C=y CONFIG_DMADEVICES=y CONFIG_PL330_DMA=y +CONFIG_CHROME_PLATFORMS=y +CONFIG_CROS_EC_CHARDEV=y CONFIG_COMMON_CLK_MAX77686=y CONFIG_COMMON_CLK_MAX77802=y CONFIG_COMMON_CLK_S2MPS11=y -CONFIG_EXYNOS_IOMMU=y CONFIG_EXTCON=y CONFIG_EXTCON_MAX14577=y CONFIG_EXTCON_MAX77693=y @@ -197,6 +211,8 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_CRAMFS=y CONFIG_ROMFS_FS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index e6b0007355f883eaca70e4ce4df5b6fcc9818ae4..d3a8018639de22d20e71e5de73a35bb1ab30309a 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -24,9 +24,8 @@ CONFIG_ARCH_MXC=y CONFIG_MACH_SCB9328=y CONFIG_MACH_APF9328=y CONFIG_MACH_MX21ADS=y -CONFIG_MACH_MX25_3DS=y CONFIG_MACH_EUKREA_CPUIMX25SD=y -CONFIG_MACH_IMX25_DT=y +CONFIG_SOC_IMX25=y CONFIG_MACH_MX27ADS=y CONFIG_MACH_MX27_3DS=y CONFIG_MACH_IMX27_VISSTRIM_M10=y @@ -177,6 +176,7 @@ CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y # CONFIG_DNOTIFY is not set +CONFIG_VFAT_FS=y # CONFIG_PROC_PAGE_MONITOR is not set CONFIG_TMPFS=y CONFIG_JFFS2_FS=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index cf1e71e2f60abedc7bb8cb8c3ce5b268deaffa7e..fdeb1c83dcb57c1f2fd61c4a967df8e9248e4172 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -71,6 +71,9 @@ CONFIG_IPV6=y CONFIG_NETFILTER=y CONFIG_CAN=y CONFIG_CAN_FLEXCAN=y +CONFIG_BT=y +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_3WIRE=y CONFIG_CFG80211=y CONFIG_MAC80211=y CONFIG_RFKILL=y @@ -168,6 +171,7 @@ CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_MC9S08DZ60=y +CONFIG_GPIO_PCA953X=y CONFIG_GPIO_STMPE=y CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y diff --git a/arch/arm/configs/mackerel_defconfig b/arch/arm/configs/mackerel_defconfig deleted file mode 100644 index 05a529311b4d964ac44a099c169f9a3f93c0e3f6..0000000000000000000000000000000000000000 --- a/arch/arm/configs/mackerel_defconfig +++ /dev/null @@ -1,157 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_UTS_NS is not set -# CONFIG_IPC_NS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -# CONFIG_NET_NS is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE_LEGACY=y -CONFIG_ARCH_SH7372=y -CONFIG_MACH_MACKEREL=y -CONFIG_MEMORY_SIZE=0x10000000 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_FORCE_MAX_ZONEORDER=15 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y -CONFIG_KEXEC=y -CONFIG_VFP=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_ARM_INTEGRATOR=y -CONFIG_MTD_BLOCK2MTD=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMSC911X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=8 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_SH_MOBILE=y -# CONFIG_HWMON is not set -# CONFIG_MFD_SUPPORT is not set -CONFIG_REGULATOR=y -CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_SH_MOBILE_LCDC=y -CONFIG_FB_SH_MOBILE_HDMI=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -# CONFIG_SND_SUPPORT_OLD_API is not set -# CONFIG_SND_VERBOSE_PROCFS is not set -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_ARM is not set -CONFIG_SND_SOC_SH4_FSI=y -CONFIG_USB=y -CONFIG_USB_RENESAS_USBHS_HCD=y -CONFIG_USB_RENESAS_USBHS=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_RENESAS_USBHS_UDC=y -CONFIG_MMC=y -CONFIG_MMC_SDHI=y -CONFIG_MMC_SH_MMCIF=y -CONFIG_DMADEVICES=y -CONFIG_SH_DMAE=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT2_FS_XIP=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -# CONFIG_DNOTIFY is not set -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFS_V4_1=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=y -CONFIG_NLS_CODEPAGE_775=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_CODEPAGE_852=y -CONFIG_NLS_CODEPAGE_855=y -CONFIG_NLS_CODEPAGE_857=y -CONFIG_NLS_CODEPAGE_860=y -CONFIG_NLS_CODEPAGE_861=y -CONFIG_NLS_CODEPAGE_862=y -CONFIG_NLS_CODEPAGE_863=y -CONFIG_NLS_CODEPAGE_864=y -CONFIG_NLS_CODEPAGE_865=y -CONFIG_NLS_CODEPAGE_866=y -CONFIG_NLS_CODEPAGE_869=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=y -CONFIG_NLS_ISO8859_3=y -CONFIG_NLS_ISO8859_4=y -CONFIG_NLS_ISO8859_5=y -CONFIG_NLS_ISO8859_6=y -CONFIG_NLS_ISO8859_7=y -CONFIG_NLS_ISO8859_9=y -CONFIG_NLS_ISO8859_13=y -CONFIG_NLS_ISO8859_14=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_KOI8_R=y -CONFIG_NLS_KOI8_U=y -CONFIG_NLS_UTF8=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_ARM_UNWIND is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ANSI_CPRNG=y diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig deleted file mode 100644 index dd18c9e527d647b0f9685285248764571e8d1d4a..0000000000000000000000000000000000000000 --- a/arch/arm/configs/msm_defconfig +++ /dev/null @@ -1,121 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS_ALL=y -CONFIG_EMBEDDED=y -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_ARCH_MSM=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_HIGHMEM=y -CONFIG_HIGHPTE=y -CONFIG_CLEANCACHE=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_VFP=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_CFG80211=y -CONFIG_RFKILL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_CHR_DEV_SCH=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -CONFIG_SLIP=y -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_MODE_SLIP6=y -CONFIG_USB_USBNET=y -# CONFIG_USB_NET_AX8817X is not set -# CONFIG_USB_NET_ZAURUS is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_MOUSE_PS2 is not set -CONFIG_INPUT_JOYSTICK=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_INPUT_MISC=y -CONFIG_INPUT_UINPUT=y -CONFIG_SERIO_LIBPS2=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_MSM=y -CONFIG_SERIAL_MSM_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_DEBUG_GPIO=y -CONFIG_GPIO_SYSFS=y -CONFIG_THERMAL=y -CONFIG_REGULATOR=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_FB=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_DYNAMIC_MINORS=y -# CONFIG_SND_ARM is not set -# CONFIG_SND_SPI is not set -# CONFIG_SND_USB is not set -CONFIG_SND_SOC=y -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_ACM=y -CONFIG_USB_SERIAL=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DEBUG_FILES=y -CONFIG_USB_GADGET_VBUS_DRAW=500 -CONFIG_RTC_CLASS=y -CONFIG_STAGING=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_EXT4_FS=y -CONFIG_FUSE_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_CIFS=y -CONFIG_PRINTK_TIME=y -CONFIG_DYNAMIC_DEBUG=y -CONFIG_DEBUG_INFO=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOCKUP_DETECTOR=y -# CONFIG_DETECT_HUNG_TASK is not set -# CONFIG_SCHED_DEBUG is not set -CONFIG_TIMER_STATS=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 9d56781a8f80171e65922a44786d8bb10cbd3d4a..f69a459f4f92db0016857df6c710eb3b281c500e 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -13,7 +13,7 @@ CONFIG_ARCH_MVEBU=y CONFIG_MACH_KIRKWOOD=y CONFIG_MACH_NETXBIG=y CONFIG_ARCH_MXC=y -CONFIG_MACH_IMX25_DT=y +CONFIG_SOC_IMX25=y CONFIG_MACH_IMX27_DT=y CONFIG_ARCH_U300=y CONFIG_PCI_MVEBU=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 06075b6d246364db1c57b1e8860e6f675d1857c5..0ca4a3eaf65d02751d08c774c1b73ff21092c408 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -12,10 +12,12 @@ CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y CONFIG_CMDLINE_PARTITION=y CONFIG_ARCH_VIRT=y +CONFIG_ARCH_ALPINE=y CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_375=y CONFIG_MACH_ARMADA_38X=y +CONFIG_MACH_ARMADA_39X=y CONFIG_MACH_ARMADA_XP=y CONFIG_MACH_DOVE=y CONFIG_ARCH_BCM=y @@ -37,11 +39,14 @@ CONFIG_ARCH_HIP04=y CONFIG_ARCH_KEYSTONE=y CONFIG_ARCH_MESON=y CONFIG_ARCH_MXC=y +CONFIG_SOC_IMX50=y CONFIG_SOC_IMX51=y CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y CONFIG_SOC_IMX6SL=y +CONFIG_SOC_IMX6SX=y CONFIG_SOC_VF610=y +CONFIG_SOC_LS1021A=y CONFIG_ARCH_OMAP3=y CONFIG_ARCH_OMAP4=y CONFIG_SOC_OMAP5=y @@ -91,6 +96,7 @@ CONFIG_ARCH_WM8850=y CONFIG_ARCH_ZYNQ=y CONFIG_TRUSTED_FOUNDATIONS=y CONFIG_PCI=y +CONFIG_PCI_HOST_GENERIC=y CONFIG_PCI_KEYSTONE=y CONFIG_PCI_MSI=y CONFIG_PCI_MVEBU=y @@ -133,6 +139,9 @@ CONFIG_CAN_BCM=y CONFIG_CAN_DEV=y CONFIG_CAN_XILINXCAN=y CONFIG_CAN_MCP251X=y +CONFIG_BT=m +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m CONFIG_CFG80211=m CONFIG_MAC80211=m CONFIG_RFKILL=y @@ -200,6 +209,8 @@ CONFIG_USB_NET_SMSC95XX=y CONFIG_BRCMFMAC=m CONFIG_RT2X00=m CONFIG_RT2800USB=m +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y @@ -208,6 +219,7 @@ CONFIG_KEYBOARD_SPEAR=y CONFIG_KEYBOARD_ST_KEYSCAN=y CONFIG_KEYBOARD_CROS_EC=y CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_MOUSE_ELAN_I2C=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=y CONFIG_TOUCHSCREEN_ST1232=m @@ -308,6 +320,7 @@ CONFIG_BATTERY_SBS=y CONFIG_CHARGER_TPS65090=y CONFIG_POWER_RESET_AS3722=y CONFIG_POWER_RESET_GPIO=y +CONFIG_POWER_RESET_GPIO_RESTART=y CONFIG_POWER_RESET_KEYSTONE=y CONFIG_POWER_RESET_SUN6I=y CONFIG_POWER_RESET_RMOBILE=y @@ -505,7 +518,6 @@ CONFIG_DW_DMAC=y CONFIG_MV_XOR=y CONFIG_TEGRA20_APB_DMA=y CONFIG_SH_DMAE=y -CONFIG_RCAR_AUDMAC_PP=m CONFIG_RCAR_DMAC=y CONFIG_STE_DMA40=y CONFIG_SIRF_DMA=y @@ -533,6 +545,8 @@ CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y +CONFIG_PM_DEVFREQ=y +CONFIG_ARM_TEGRA_DEVFREQ=m CONFIG_MEMORY=y CONFIG_TI_AEMIF=y CONFIG_IIO=y @@ -550,6 +564,7 @@ CONFIG_PHY_MIPHY365X=y CONFIG_PHY_STIH41X_USB=y CONFIG_PHY_STIH407_USB=y CONFIG_PHY_SUN4I_USB=y +CONFIG_PHY_SUN9I_USB=y CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index 73673e95f23c6351982ec081533f92acd72fd52f..cacc9f4055a72945aab6dba3909b0409c6cf9abc 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig @@ -5,6 +5,7 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y +CONFIG_PERF_EVENTS=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y @@ -12,6 +13,7 @@ CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_375=y CONFIG_MACH_ARMADA_38X=y +CONFIG_MACH_ARMADA_39X=y CONFIG_MACH_ARMADA_XP=y CONFIG_MACH_DOVE=y CONFIG_PCI=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index c7906c2fd645de229aeb12cde6c15cee7e0bb429..b47e7c6628c9f8883322cffba9e97c12f6963098 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -149,6 +149,7 @@ CONFIG_EXT4_FS=y CONFIG_FSCACHE=m CONFIG_FSCACHE_STATS=y CONFIG_CACHEFILES=m +CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_JFFS2_FS=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index a7dce674f1be073558dd062d5d29b32e331dba9d..0c8a787345368794950b28d529686a1554b4b1a0 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -34,7 +33,6 @@ CONFIG_ARCH_OMAP16XX=y CONFIG_MACH_OMAP_INNOVATOR=y CONFIG_MACH_OMAP_H2=y CONFIG_MACH_OMAP_H3=y -CONFIG_MACH_OMAP_HTCWIZARD=y CONFIG_MACH_HERALD=y CONFIG_MACH_OMAP_OSK=y CONFIG_MACH_OMAP_PERSEUS2=y @@ -55,7 +53,6 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_LEDS=y -CONFIG_LEDS_CPU=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=1f03 rootfstype=jffs2" @@ -80,8 +77,6 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_IPV6=y CONFIG_NETFILTER=y CONFIG_BT=y -CONFIG_BT_L2CAP=y -CONFIG_BT_SCO=y CONFIG_BT_RFCOMM=y CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=y @@ -92,11 +87,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_CONNECTOR=y # CONFIG_PROC_EVENTS is not set CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=3 -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y @@ -113,11 +104,9 @@ CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y CONFIG_TUN=y CONFIG_PHYLIB=y -CONFIG_NET_ETHERNET=y CONFIG_SMC91X=y CONFIG_USB_CATC=y CONFIG_USB_KAWETH=y @@ -158,7 +147,6 @@ CONFIG_SPI_OMAP_UWIRE=y CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_OMAP_WATCHDOG=y -CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y @@ -168,7 +156,6 @@ CONFIG_FB_OMAP_LCDC_EXTERNAL=y CONFIG_FB_OMAP_LCDC_HWA742=y CONFIG_FB_OMAP_MANUAL_UPDATE=y CONFIG_FB_OMAP_LCD_MIPID=y -CONFIG_FB_OMAP_BOOTLOADER_INIT=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -194,7 +181,6 @@ CONFIG_SND_OMAP_SOC=y # CONFIG_USB_HID is not set CONFIG_USB=y CONFIG_USB_PHY=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y @@ -261,9 +247,7 @@ CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_SECURITY=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_PCBC=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 8e108599e1af401451aeeb01a9e6b7a1752c7c0d..3743ca221d402ce5d89df72baca5b1500ebb799b 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -1,3 +1,4 @@ +CONFIG_KERNEL_LZMA=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_FHANDLE=y @@ -86,17 +87,33 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y # CONFIG_INET_LRO is not set CONFIG_NETFILTER=y +CONFIG_PHONET=m CONFIG_CAN=m CONFIG_CAN_C_CAN=m CONFIG_CAN_C_CAN_PLATFORM=m CONFIG_BT=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTSDIO=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIUART_3WIRE=y CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBPA10X=m CONFIG_CFG80211=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIVHCI=m +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m +CONFIG_AF_RXRPC=m +CONFIG_RXKAD=m CONFIG_MAC80211=m CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -163,6 +180,7 @@ CONFIG_USB_EPSON2888=y CONFIG_USB_EHCI_HCD=m CONFIG_USB_OHCI_HCD=m CONFIG_USB_KC2190=y +CONFIG_USB_CDC_PHONET=m CONFIG_LIBERTAS=m CONFIG_LIBERTAS_USB=m CONFIG_LIBERTAS_SDIO=m @@ -209,6 +227,10 @@ CONFIG_I2C_CHARDEV=y CONFIG_SPI=y CONFIG_SPI_OMAP24XX=y CONFIG_SPI_TI_QSPI=m +CONFIG_HSI=m +CONFIG_OMAP_SSI=m +CONFIG_NOKIA_MODEM=m +CONFIG_SSI_PROTOCOL=m CONFIG_PINCTRL_SINGLE=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y @@ -334,6 +356,7 @@ CONFIG_USB_CONFIGFS_ECM=y CONFIG_USB_CONFIGFS_ECM_SUBSET=y CONFIG_USB_CONFIGFS_RNDIS=y CONFIG_USB_CONFIGFS_EEM=y +CONFIG_USB_CONFIGFS_PHONET=y CONFIG_USB_CONFIGFS_MASS_STORAGE=y CONFIG_USB_CONFIGFS_F_LB_SS=y CONFIG_USB_CONFIGFS_F_FS=y @@ -342,6 +365,7 @@ CONFIG_USB_CONFIGFS_F_UAC2=y CONFIG_USB_CONFIGFS_F_MIDI=y CONFIG_USB_CONFIGFS_F_HID=y CONFIG_USB_ZERO=m +CONFIG_USB_G_NOKIA=m CONFIG_MMC=y CONFIG_SDIO_UART=y CONFIG_MMC_OMAP=y @@ -349,6 +373,7 @@ CONFIG_MMC_OMAP_HS=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m CONFIG_LEDS_GPIO=m +CONFIG_LEDS_PWM=m CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_ONESHOT=m @@ -368,6 +393,7 @@ CONFIG_TI_EDMA=y CONFIG_DMA_OMAP=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXTCON=m +CONFIG_EXTCON_USB_GPIO=m CONFIG_EXTCON_PALMAS=m CONFIG_TI_EMIF=m CONFIG_PWM=y @@ -390,6 +416,7 @@ CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y +CONFIG_CONFIGFS_FS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_SUMMARY=y CONFIG_JFFS2_FS_XATTR=y diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index 8c7da3319d82b050cb964e3bd841c333481d61b8..d2f2babfd47a0985adda898f6de949cffb2010eb 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -97,9 +97,9 @@ CONFIG_PINCTRL_APQ8084=y CONFIG_PINCTRL_IPQ8064=y CONFIG_PINCTRL_MSM8960=y CONFIG_PINCTRL_MSM8X74=y +CONFIG_GPIOLIB=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y -CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_MSM=y CONFIG_THERMAL=y @@ -125,7 +125,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG_FILES=y CONFIG_USB_GADGET_VBUS_DRAW=500 CONFIG_MMC=y -CONFIG_MMC_BLOCK_MINORS=16 +CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y @@ -134,14 +134,15 @@ CONFIG_RTC_CLASS=y CONFIG_DMADEVICES=y CONFIG_QCOM_BAM_DMA=y CONFIG_STAGING=y -CONFIG_QCOM_GSBI=y CONFIG_COMMON_CLK_QCOM=y CONFIG_APQ_MMCC_8084=y -CONFIG_IPQ_GCC_806X=y +CONFIG_IPQ_LCC_806X=y CONFIG_MSM_GCC_8660=y +CONFIG_MSM_LCC_8960=y CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y CONFIG_MSM_IOMMU=y +CONFIG_QCOM_GSBI=y CONFIG_PHY_QCOM_APQ8064_SATA=y CONFIG_PHY_QCOM_IPQ806X_SATA=y CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index b17036088726eb2b135473fbd41a82d587c48f3f..b58618e2d13c51c869c3d4fa2b1c43aa7f61fd41 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -12,7 +12,9 @@ CONFIG_SLAB=y CONFIG_ARCH_SHMOBILE_MULTI=y CONFIG_ARCH_EMEV2=y CONFIG_ARCH_R7S72100=y +CONFIG_ARCH_R8A73A4=y CONFIG_ARCH_R8A7740=y +CONFIG_ARCH_R8A7778=y CONFIG_ARCH_R8A7779=y CONFIG_ARCH_R8A7790=y CONFIG_ARCH_R8A7791=y @@ -92,7 +94,6 @@ CONFIG_INPUT_ADXL34X=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_EM=y CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=20 @@ -109,6 +110,9 @@ CONFIG_SPI_SH_HSPI=y CONFIG_GPIO_EM=y CONFIG_GPIO_RCAR=y CONFIG_GPIO_PCF857X=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_RMOBILE=y # CONFIG_HWMON is not set CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y @@ -121,6 +125,7 @@ CONFIG_REGULATOR=y CONFIG_REGULATOR_AS3711=y CONFIG_REGULATOR_DA9210=y CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_MAX8973=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_CONTROLLER=y @@ -133,6 +138,7 @@ CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_RENESAS_VSP1=y # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_ADV7180=y +CONFIG_VIDEO_ML86V7667=y CONFIG_DRM=y CONFIG_DRM_RCAR_DU=y CONFIG_FB_SH_MOBILE_LCDC=y @@ -167,6 +173,7 @@ CONFIG_LEDS_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_RS5C372=y CONFIG_RTC_DRV_S35390A=y +CONFIG_RTC_DRV_RX8581=y CONFIG_DMADEVICES=y CONFIG_SH_DMAE=y CONFIG_RCAR_DMAC=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 8f6a5702b69619eb6d332db0dbf45853b527faa4..8ecba00dcd83def3a2ef3abc86d71e1aec942b0f 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -107,6 +107,7 @@ CONFIG_RTC_DRV_SUN6I=y CONFIG_RTC_DRV_SUNXI=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_PHY_SUN4I_USB=y +CONFIG_PHY_SUN9I_USB=y CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/crypto/Kconfig b/arch/arm/crypto/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..8da2207b00721b600ef340f3fdf8ceea48e0cae7 --- /dev/null +++ b/arch/arm/crypto/Kconfig @@ -0,0 +1,130 @@ + +menuconfig ARM_CRYPTO + bool "ARM Accelerated Cryptographic Algorithms" + depends on ARM + help + Say Y here to choose from a selection of cryptographic algorithms + implemented using ARM specific CPU features or instructions. + +if ARM_CRYPTO + +config CRYPTO_SHA1_ARM + tristate "SHA1 digest algorithm (ARM-asm)" + select CRYPTO_SHA1 + select CRYPTO_HASH + help + SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented + using optimized ARM assembler. + +config CRYPTO_SHA1_ARM_NEON + tristate "SHA1 digest algorithm (ARM NEON)" + depends on KERNEL_MODE_NEON + select CRYPTO_SHA1_ARM + select CRYPTO_SHA1 + select CRYPTO_HASH + help + SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented + using optimized ARM NEON assembly, when NEON instructions are + available. + +config CRYPTO_SHA1_ARM_CE + tristate "SHA1 digest algorithm (ARM v8 Crypto Extensions)" + depends on KERNEL_MODE_NEON + select CRYPTO_SHA1_ARM + select CRYPTO_HASH + help + SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented + using special ARMv8 Crypto Extensions. + +config CRYPTO_SHA2_ARM_CE + tristate "SHA-224/256 digest algorithm (ARM v8 Crypto Extensions)" + depends on KERNEL_MODE_NEON + select CRYPTO_SHA256_ARM + select CRYPTO_HASH + help + SHA-256 secure hash standard (DFIPS 180-2) implemented + using special ARMv8 Crypto Extensions. + +config CRYPTO_SHA256_ARM + tristate "SHA-224/256 digest algorithm (ARM-asm and NEON)" + select CRYPTO_HASH + depends on !CPU_V7M + help + SHA-256 secure hash standard (DFIPS 180-2) implemented + using optimized ARM assembler and NEON, when available. + +config CRYPTO_SHA512_ARM_NEON + tristate "SHA384 and SHA512 digest algorithm (ARM NEON)" + depends on KERNEL_MODE_NEON + select CRYPTO_SHA512 + select CRYPTO_HASH + help + SHA-512 secure hash standard (DFIPS 180-2) implemented + using ARM NEON instructions, when available. + + This version of SHA implements a 512 bit hash with 256 bits of + security against collision attacks. + + This code also includes SHA-384, a 384 bit hash with 192 bits + of security against collision attacks. + +config CRYPTO_AES_ARM + tristate "AES cipher algorithms (ARM-asm)" + depends on ARM + select CRYPTO_ALGAPI + select CRYPTO_AES + help + Use optimized AES assembler routines for ARM platforms. + + AES cipher algorithms (FIPS-197). AES uses the Rijndael + algorithm. + + Rijndael appears to be consistently a very good performer in + both hardware and software across a wide range of computing + environments regardless of its use in feedback or non-feedback + modes. Its key setup time is excellent, and its key agility is + good. Rijndael's very low memory requirements make it very well + suited for restricted-space environments, in which it also + demonstrates excellent performance. Rijndael's operations are + among the easiest to defend against power and timing attacks. + + The AES specifies three key sizes: 128, 192 and 256 bits + + See for more information. + +config CRYPTO_AES_ARM_BS + tristate "Bit sliced AES using NEON instructions" + depends on KERNEL_MODE_NEON + select CRYPTO_ALGAPI + select CRYPTO_AES_ARM + select CRYPTO_ABLK_HELPER + help + Use a faster and more secure NEON based implementation of AES in CBC, + CTR and XTS modes + + Bit sliced AES gives around 45% speedup on Cortex-A15 for CTR mode + and for XTS mode encryption, CBC and XTS mode decryption speedup is + around 25%. (CBC encryption speed is not affected by this driver.) + This implementation does not rely on any lookup tables so it is + believed to be invulnerable to cache timing attacks. + +config CRYPTO_AES_ARM_CE + tristate "Accelerated AES using ARMv8 Crypto Extensions" + depends on KERNEL_MODE_NEON + select CRYPTO_ALGAPI + select CRYPTO_ABLK_HELPER + help + Use an implementation of AES in CBC, CTR and XTS modes that uses + ARMv8 Crypto Extensions + +config CRYPTO_GHASH_ARM_CE + tristate "PMULL-accelerated GHASH using ARMv8 Crypto Extensions" + depends on KERNEL_MODE_NEON + select CRYPTO_HASH + select CRYPTO_CRYPTD + help + Use an implementation of GHASH (used by the GCM AEAD chaining mode) + that uses the 64x64 to 128 bit polynomial multiplication (vmull.p64) + that is part of the ARMv8 Crypto Extensions + +endif diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile index b48fa341648d1766a49bf4553e3149836d264c66..6ea828241fcb66ff121fc2b2cc9d892d6be05f91 100644 --- a/arch/arm/crypto/Makefile +++ b/arch/arm/crypto/Makefile @@ -6,13 +6,35 @@ obj-$(CONFIG_CRYPTO_AES_ARM) += aes-arm.o obj-$(CONFIG_CRYPTO_AES_ARM_BS) += aes-arm-bs.o obj-$(CONFIG_CRYPTO_SHA1_ARM) += sha1-arm.o obj-$(CONFIG_CRYPTO_SHA1_ARM_NEON) += sha1-arm-neon.o +obj-$(CONFIG_CRYPTO_SHA256_ARM) += sha256-arm.o obj-$(CONFIG_CRYPTO_SHA512_ARM_NEON) += sha512-arm-neon.o +ce-obj-$(CONFIG_CRYPTO_AES_ARM_CE) += aes-arm-ce.o +ce-obj-$(CONFIG_CRYPTO_SHA1_ARM_CE) += sha1-arm-ce.o +ce-obj-$(CONFIG_CRYPTO_SHA2_ARM_CE) += sha2-arm-ce.o +ce-obj-$(CONFIG_CRYPTO_GHASH_ARM_CE) += ghash-arm-ce.o + +ifneq ($(ce-obj-y)$(ce-obj-m),) +ifeq ($(call as-instr,.fpu crypto-neon-fp-armv8,y,n),y) +obj-y += $(ce-obj-y) +obj-m += $(ce-obj-m) +else +$(warning These ARMv8 Crypto Extensions modules need binutils 2.23 or higher) +$(warning $(ce-obj-y) $(ce-obj-m)) +endif +endif + aes-arm-y := aes-armv4.o aes_glue.o aes-arm-bs-y := aesbs-core.o aesbs-glue.o sha1-arm-y := sha1-armv4-large.o sha1_glue.o sha1-arm-neon-y := sha1-armv7-neon.o sha1_neon_glue.o +sha256-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha256_neon_glue.o +sha256-arm-y := sha256-core.o sha256_glue.o $(sha256-arm-neon-y) sha512-arm-neon-y := sha512-armv7-neon.o sha512_neon_glue.o +sha1-arm-ce-y := sha1-ce-core.o sha1-ce-glue.o +sha2-arm-ce-y := sha2-ce-core.o sha2-ce-glue.o +aes-arm-ce-y := aes-ce-core.o aes-ce-glue.o +ghash-arm-ce-y := ghash-ce-core.o ghash-ce-glue.o quiet_cmd_perl = PERL $@ cmd_perl = $(PERL) $(<) > $(@) @@ -20,4 +42,7 @@ quiet_cmd_perl = PERL $@ $(src)/aesbs-core.S_shipped: $(src)/bsaes-armv7.pl $(call cmd,perl) -.PRECIOUS: $(obj)/aesbs-core.S +$(src)/sha256-core.S_shipped: $(src)/sha256-armv4.pl + $(call cmd,perl) + +.PRECIOUS: $(obj)/aesbs-core.S $(obj)/sha256-core.S diff --git a/arch/arm/crypto/aes-ce-core.S b/arch/arm/crypto/aes-ce-core.S new file mode 100644 index 0000000000000000000000000000000000000000..8cfa468ee570b0bd0f2bb800fa1f7f21b66edaf6 --- /dev/null +++ b/arch/arm/crypto/aes-ce-core.S @@ -0,0 +1,518 @@ +/* + * aes-ce-core.S - AES in CBC/CTR/XTS mode using ARMv8 Crypto Extensions + * + * Copyright (C) 2015 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + + .text + .fpu crypto-neon-fp-armv8 + .align 3 + + .macro enc_round, state, key + aese.8 \state, \key + aesmc.8 \state, \state + .endm + + .macro dec_round, state, key + aesd.8 \state, \key + aesimc.8 \state, \state + .endm + + .macro enc_dround, key1, key2 + enc_round q0, \key1 + enc_round q0, \key2 + .endm + + .macro dec_dround, key1, key2 + dec_round q0, \key1 + dec_round q0, \key2 + .endm + + .macro enc_fround, key1, key2, key3 + enc_round q0, \key1 + aese.8 q0, \key2 + veor q0, q0, \key3 + .endm + + .macro dec_fround, key1, key2, key3 + dec_round q0, \key1 + aesd.8 q0, \key2 + veor q0, q0, \key3 + .endm + + .macro enc_dround_3x, key1, key2 + enc_round q0, \key1 + enc_round q1, \key1 + enc_round q2, \key1 + enc_round q0, \key2 + enc_round q1, \key2 + enc_round q2, \key2 + .endm + + .macro dec_dround_3x, key1, key2 + dec_round q0, \key1 + dec_round q1, \key1 + dec_round q2, \key1 + dec_round q0, \key2 + dec_round q1, \key2 + dec_round q2, \key2 + .endm + + .macro enc_fround_3x, key1, key2, key3 + enc_round q0, \key1 + enc_round q1, \key1 + enc_round q2, \key1 + aese.8 q0, \key2 + aese.8 q1, \key2 + aese.8 q2, \key2 + veor q0, q0, \key3 + veor q1, q1, \key3 + veor q2, q2, \key3 + .endm + + .macro dec_fround_3x, key1, key2, key3 + dec_round q0, \key1 + dec_round q1, \key1 + dec_round q2, \key1 + aesd.8 q0, \key2 + aesd.8 q1, \key2 + aesd.8 q2, \key2 + veor q0, q0, \key3 + veor q1, q1, \key3 + veor q2, q2, \key3 + .endm + + .macro do_block, dround, fround + cmp r3, #12 @ which key size? + vld1.8 {q10-q11}, [ip]! + \dround q8, q9 + vld1.8 {q12-q13}, [ip]! + \dround q10, q11 + vld1.8 {q10-q11}, [ip]! + \dround q12, q13 + vld1.8 {q12-q13}, [ip]! + \dround q10, q11 + blo 0f @ AES-128: 10 rounds + vld1.8 {q10-q11}, [ip]! + beq 1f @ AES-192: 12 rounds + \dround q12, q13 + vld1.8 {q12-q13}, [ip] + \dround q10, q11 +0: \fround q12, q13, q14 + bx lr + +1: \dround q12, q13 + \fround q10, q11, q14 + bx lr + .endm + + /* + * Internal, non-AAPCS compliant functions that implement the core AES + * transforms. These should preserve all registers except q0 - q2 and ip + * Arguments: + * q0 : first in/output block + * q1 : second in/output block (_3x version only) + * q2 : third in/output block (_3x version only) + * q8 : first round key + * q9 : secound round key + * ip : address of 3rd round key + * q14 : final round key + * r3 : number of rounds + */ + .align 6 +aes_encrypt: + add ip, r2, #32 @ 3rd round key +.Laes_encrypt_tweak: + do_block enc_dround, enc_fround +ENDPROC(aes_encrypt) + + .align 6 +aes_decrypt: + add ip, r2, #32 @ 3rd round key + do_block dec_dround, dec_fround +ENDPROC(aes_decrypt) + + .align 6 +aes_encrypt_3x: + add ip, r2, #32 @ 3rd round key + do_block enc_dround_3x, enc_fround_3x +ENDPROC(aes_encrypt_3x) + + .align 6 +aes_decrypt_3x: + add ip, r2, #32 @ 3rd round key + do_block dec_dround_3x, dec_fround_3x +ENDPROC(aes_decrypt_3x) + + .macro prepare_key, rk, rounds + add ip, \rk, \rounds, lsl #4 + vld1.8 {q8-q9}, [\rk] @ load first 2 round keys + vld1.8 {q14}, [ip] @ load last round key + .endm + + /* + * aes_ecb_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, + * int blocks) + * aes_ecb_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, + * int blocks) + */ +ENTRY(ce_aes_ecb_encrypt) + push {r4, lr} + ldr r4, [sp, #8] + prepare_key r2, r3 +.Lecbencloop3x: + subs r4, r4, #3 + bmi .Lecbenc1x + vld1.8 {q0-q1}, [r1, :64]! + vld1.8 {q2}, [r1, :64]! + bl aes_encrypt_3x + vst1.8 {q0-q1}, [r0, :64]! + vst1.8 {q2}, [r0, :64]! + b .Lecbencloop3x +.Lecbenc1x: + adds r4, r4, #3 + beq .Lecbencout +.Lecbencloop: + vld1.8 {q0}, [r1, :64]! + bl aes_encrypt + vst1.8 {q0}, [r0, :64]! + subs r4, r4, #1 + bne .Lecbencloop +.Lecbencout: + pop {r4, pc} +ENDPROC(ce_aes_ecb_encrypt) + +ENTRY(ce_aes_ecb_decrypt) + push {r4, lr} + ldr r4, [sp, #8] + prepare_key r2, r3 +.Lecbdecloop3x: + subs r4, r4, #3 + bmi .Lecbdec1x + vld1.8 {q0-q1}, [r1, :64]! + vld1.8 {q2}, [r1, :64]! + bl aes_decrypt_3x + vst1.8 {q0-q1}, [r0, :64]! + vst1.8 {q2}, [r0, :64]! + b .Lecbdecloop3x +.Lecbdec1x: + adds r4, r4, #3 + beq .Lecbdecout +.Lecbdecloop: + vld1.8 {q0}, [r1, :64]! + bl aes_decrypt + vst1.8 {q0}, [r0, :64]! + subs r4, r4, #1 + bne .Lecbdecloop +.Lecbdecout: + pop {r4, pc} +ENDPROC(ce_aes_ecb_decrypt) + + /* + * aes_cbc_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, + * int blocks, u8 iv[]) + * aes_cbc_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, + * int blocks, u8 iv[]) + */ +ENTRY(ce_aes_cbc_encrypt) + push {r4-r6, lr} + ldrd r4, r5, [sp, #16] + vld1.8 {q0}, [r5] + prepare_key r2, r3 +.Lcbcencloop: + vld1.8 {q1}, [r1, :64]! @ get next pt block + veor q0, q0, q1 @ ..and xor with iv + bl aes_encrypt + vst1.8 {q0}, [r0, :64]! + subs r4, r4, #1 + bne .Lcbcencloop + vst1.8 {q0}, [r5] + pop {r4-r6, pc} +ENDPROC(ce_aes_cbc_encrypt) + +ENTRY(ce_aes_cbc_decrypt) + push {r4-r6, lr} + ldrd r4, r5, [sp, #16] + vld1.8 {q6}, [r5] @ keep iv in q6 + prepare_key r2, r3 +.Lcbcdecloop3x: + subs r4, r4, #3 + bmi .Lcbcdec1x + vld1.8 {q0-q1}, [r1, :64]! + vld1.8 {q2}, [r1, :64]! + vmov q3, q0 + vmov q4, q1 + vmov q5, q2 + bl aes_decrypt_3x + veor q0, q0, q6 + veor q1, q1, q3 + veor q2, q2, q4 + vmov q6, q5 + vst1.8 {q0-q1}, [r0, :64]! + vst1.8 {q2}, [r0, :64]! + b .Lcbcdecloop3x +.Lcbcdec1x: + adds r4, r4, #3 + beq .Lcbcdecout + vmov q15, q14 @ preserve last round key +.Lcbcdecloop: + vld1.8 {q0}, [r1, :64]! @ get next ct block + veor q14, q15, q6 @ combine prev ct with last key + vmov q6, q0 + bl aes_decrypt + vst1.8 {q0}, [r0, :64]! + subs r4, r4, #1 + bne .Lcbcdecloop +.Lcbcdecout: + vst1.8 {q6}, [r5] @ keep iv in q6 + pop {r4-r6, pc} +ENDPROC(ce_aes_cbc_decrypt) + + /* + * aes_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, + * int blocks, u8 ctr[]) + */ +ENTRY(ce_aes_ctr_encrypt) + push {r4-r6, lr} + ldrd r4, r5, [sp, #16] + vld1.8 {q6}, [r5] @ load ctr + prepare_key r2, r3 + vmov r6, s27 @ keep swabbed ctr in r6 + rev r6, r6 + cmn r6, r4 @ 32 bit overflow? + bcs .Lctrloop +.Lctrloop3x: + subs r4, r4, #3 + bmi .Lctr1x + add r6, r6, #1 + vmov q0, q6 + vmov q1, q6 + rev ip, r6 + add r6, r6, #1 + vmov q2, q6 + vmov s7, ip + rev ip, r6 + add r6, r6, #1 + vmov s11, ip + vld1.8 {q3-q4}, [r1, :64]! + vld1.8 {q5}, [r1, :64]! + bl aes_encrypt_3x + veor q0, q0, q3 + veor q1, q1, q4 + veor q2, q2, q5 + rev ip, r6 + vst1.8 {q0-q1}, [r0, :64]! + vst1.8 {q2}, [r0, :64]! + vmov s27, ip + b .Lctrloop3x +.Lctr1x: + adds r4, r4, #3 + beq .Lctrout +.Lctrloop: + vmov q0, q6 + bl aes_encrypt + subs r4, r4, #1 + bmi .Lctrhalfblock @ blocks < 0 means 1/2 block + vld1.8 {q3}, [r1, :64]! + veor q3, q0, q3 + vst1.8 {q3}, [r0, :64]! + + adds r6, r6, #1 @ increment BE ctr + rev ip, r6 + vmov s27, ip + bcs .Lctrcarry + teq r4, #0 + bne .Lctrloop +.Lctrout: + vst1.8 {q6}, [r5] + pop {r4-r6, pc} + +.Lctrhalfblock: + vld1.8 {d1}, [r1, :64] + veor d0, d0, d1 + vst1.8 {d0}, [r0, :64] + pop {r4-r6, pc} + +.Lctrcarry: + .irp sreg, s26, s25, s24 + vmov ip, \sreg @ load next word of ctr + rev ip, ip @ ... to handle the carry + adds ip, ip, #1 + rev ip, ip + vmov \sreg, ip + bcc 0f + .endr +0: teq r4, #0 + beq .Lctrout + b .Lctrloop +ENDPROC(ce_aes_ctr_encrypt) + + /* + * aes_xts_encrypt(u8 out[], u8 const in[], u8 const rk1[], int rounds, + * int blocks, u8 iv[], u8 const rk2[], int first) + * aes_xts_decrypt(u8 out[], u8 const in[], u8 const rk1[], int rounds, + * int blocks, u8 iv[], u8 const rk2[], int first) + */ + + .macro next_tweak, out, in, const, tmp + vshr.s64 \tmp, \in, #63 + vand \tmp, \tmp, \const + vadd.u64 \out, \in, \in + vext.8 \tmp, \tmp, \tmp, #8 + veor \out, \out, \tmp + .endm + + .align 3 +.Lxts_mul_x: + .quad 1, 0x87 + +ce_aes_xts_init: + vldr d14, .Lxts_mul_x + vldr d15, .Lxts_mul_x + 8 + + ldrd r4, r5, [sp, #16] @ load args + ldr r6, [sp, #28] + vld1.8 {q0}, [r5] @ load iv + teq r6, #1 @ start of a block? + bxne lr + + @ Encrypt the IV in q0 with the second AES key. This should only + @ be done at the start of a block. + ldr r6, [sp, #24] @ load AES key 2 + prepare_key r6, r3 + add ip, r6, #32 @ 3rd round key of key 2 + b .Laes_encrypt_tweak @ tail call +ENDPROC(ce_aes_xts_init) + +ENTRY(ce_aes_xts_encrypt) + push {r4-r6, lr} + + bl ce_aes_xts_init @ run shared prologue + prepare_key r2, r3 + vmov q3, q0 + + teq r6, #0 @ start of a block? + bne .Lxtsenc3x + +.Lxtsencloop3x: + next_tweak q3, q3, q7, q6 +.Lxtsenc3x: + subs r4, r4, #3 + bmi .Lxtsenc1x + vld1.8 {q0-q1}, [r1, :64]! @ get 3 pt blocks + vld1.8 {q2}, [r1, :64]! + next_tweak q4, q3, q7, q6 + veor q0, q0, q3 + next_tweak q5, q4, q7, q6 + veor q1, q1, q4 + veor q2, q2, q5 + bl aes_encrypt_3x + veor q0, q0, q3 + veor q1, q1, q4 + veor q2, q2, q5 + vst1.8 {q0-q1}, [r0, :64]! @ write 3 ct blocks + vst1.8 {q2}, [r0, :64]! + vmov q3, q5 + teq r4, #0 + beq .Lxtsencout + b .Lxtsencloop3x +.Lxtsenc1x: + adds r4, r4, #3 + beq .Lxtsencout +.Lxtsencloop: + vld1.8 {q0}, [r1, :64]! + veor q0, q0, q3 + bl aes_encrypt + veor q0, q0, q3 + vst1.8 {q0}, [r0, :64]! + subs r4, r4, #1 + beq .Lxtsencout + next_tweak q3, q3, q7, q6 + b .Lxtsencloop +.Lxtsencout: + vst1.8 {q3}, [r5] + pop {r4-r6, pc} +ENDPROC(ce_aes_xts_encrypt) + + +ENTRY(ce_aes_xts_decrypt) + push {r4-r6, lr} + + bl ce_aes_xts_init @ run shared prologue + prepare_key r2, r3 + vmov q3, q0 + + teq r6, #0 @ start of a block? + bne .Lxtsdec3x + +.Lxtsdecloop3x: + next_tweak q3, q3, q7, q6 +.Lxtsdec3x: + subs r4, r4, #3 + bmi .Lxtsdec1x + vld1.8 {q0-q1}, [r1, :64]! @ get 3 ct blocks + vld1.8 {q2}, [r1, :64]! + next_tweak q4, q3, q7, q6 + veor q0, q0, q3 + next_tweak q5, q4, q7, q6 + veor q1, q1, q4 + veor q2, q2, q5 + bl aes_decrypt_3x + veor q0, q0, q3 + veor q1, q1, q4 + veor q2, q2, q5 + vst1.8 {q0-q1}, [r0, :64]! @ write 3 pt blocks + vst1.8 {q2}, [r0, :64]! + vmov q3, q5 + teq r4, #0 + beq .Lxtsdecout + b .Lxtsdecloop3x +.Lxtsdec1x: + adds r4, r4, #3 + beq .Lxtsdecout +.Lxtsdecloop: + vld1.8 {q0}, [r1, :64]! + veor q0, q0, q3 + add ip, r2, #32 @ 3rd round key + bl aes_decrypt + veor q0, q0, q3 + vst1.8 {q0}, [r0, :64]! + subs r4, r4, #1 + beq .Lxtsdecout + next_tweak q3, q3, q7, q6 + b .Lxtsdecloop +.Lxtsdecout: + vst1.8 {q3}, [r5] + pop {r4-r6, pc} +ENDPROC(ce_aes_xts_decrypt) + + /* + * u32 ce_aes_sub(u32 input) - use the aese instruction to perform the + * AES sbox substitution on each byte in + * 'input' + */ +ENTRY(ce_aes_sub) + vdup.32 q1, r0 + veor q0, q0, q0 + aese.8 q0, q1 + vmov r0, s0 + bx lr +ENDPROC(ce_aes_sub) + + /* + * void ce_aes_invert(u8 *dst, u8 *src) - perform the Inverse MixColumns + * operation on round key *src + */ +ENTRY(ce_aes_invert) + vld1.8 {q0}, [r1] + aesimc.8 q0, q0 + vst1.8 {q0}, [r0] + bx lr +ENDPROC(ce_aes_invert) diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c new file mode 100644 index 0000000000000000000000000000000000000000..b445a5d56f4342b71540e40c1ce298e0ad786688 --- /dev/null +++ b/arch/arm/crypto/aes-ce-glue.c @@ -0,0 +1,524 @@ +/* + * aes-ce-glue.c - wrapper code for ARMv8 AES + * + * Copyright (C) 2015 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS using ARMv8 Crypto Extensions"); +MODULE_AUTHOR("Ard Biesheuvel "); +MODULE_LICENSE("GPL v2"); + +/* defined in aes-ce-core.S */ +asmlinkage u32 ce_aes_sub(u32 input); +asmlinkage void ce_aes_invert(void *dst, void *src); + +asmlinkage void ce_aes_ecb_encrypt(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks); +asmlinkage void ce_aes_ecb_decrypt(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks); + +asmlinkage void ce_aes_cbc_encrypt(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks, u8 iv[]); +asmlinkage void ce_aes_cbc_decrypt(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks, u8 iv[]); + +asmlinkage void ce_aes_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks, u8 ctr[]); + +asmlinkage void ce_aes_xts_encrypt(u8 out[], u8 const in[], u8 const rk1[], + int rounds, int blocks, u8 iv[], + u8 const rk2[], int first); +asmlinkage void ce_aes_xts_decrypt(u8 out[], u8 const in[], u8 const rk1[], + int rounds, int blocks, u8 iv[], + u8 const rk2[], int first); + +struct aes_block { + u8 b[AES_BLOCK_SIZE]; +}; + +static int num_rounds(struct crypto_aes_ctx *ctx) +{ + /* + * # of rounds specified by AES: + * 128 bit key 10 rounds + * 192 bit key 12 rounds + * 256 bit key 14 rounds + * => n byte key => 6 + (n/4) rounds + */ + return 6 + ctx->key_length / 4; +} + +static int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key, + unsigned int key_len) +{ + /* + * The AES key schedule round constants + */ + static u8 const rcon[] = { + 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1b, 0x36, + }; + + u32 kwords = key_len / sizeof(u32); + struct aes_block *key_enc, *key_dec; + int i, j; + + if (key_len != AES_KEYSIZE_128 && + key_len != AES_KEYSIZE_192 && + key_len != AES_KEYSIZE_256) + return -EINVAL; + + memcpy(ctx->key_enc, in_key, key_len); + ctx->key_length = key_len; + + kernel_neon_begin(); + for (i = 0; i < sizeof(rcon); i++) { + u32 *rki = ctx->key_enc + (i * kwords); + u32 *rko = rki + kwords; + + rko[0] = ror32(ce_aes_sub(rki[kwords - 1]), 8); + rko[0] = rko[0] ^ rki[0] ^ rcon[i]; + rko[1] = rko[0] ^ rki[1]; + rko[2] = rko[1] ^ rki[2]; + rko[3] = rko[2] ^ rki[3]; + + if (key_len == AES_KEYSIZE_192) { + if (i >= 7) + break; + rko[4] = rko[3] ^ rki[4]; + rko[5] = rko[4] ^ rki[5]; + } else if (key_len == AES_KEYSIZE_256) { + if (i >= 6) + break; + rko[4] = ce_aes_sub(rko[3]) ^ rki[4]; + rko[5] = rko[4] ^ rki[5]; + rko[6] = rko[5] ^ rki[6]; + rko[7] = rko[6] ^ rki[7]; + } + } + + /* + * Generate the decryption keys for the Equivalent Inverse Cipher. + * This involves reversing the order of the round keys, and applying + * the Inverse Mix Columns transformation on all but the first and + * the last one. + */ + key_enc = (struct aes_block *)ctx->key_enc; + key_dec = (struct aes_block *)ctx->key_dec; + j = num_rounds(ctx); + + key_dec[0] = key_enc[j]; + for (i = 1, j--; j > 0; i++, j--) + ce_aes_invert(key_dec + i, key_enc + j); + key_dec[i] = key_enc[0]; + + kernel_neon_end(); + return 0; +} + +static int ce_aes_setkey(struct crypto_tfm *tfm, const u8 *in_key, + unsigned int key_len) +{ + struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm); + int ret; + + ret = ce_aes_expandkey(ctx, in_key, key_len); + if (!ret) + return 0; + + tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + return -EINVAL; +} + +struct crypto_aes_xts_ctx { + struct crypto_aes_ctx key1; + struct crypto_aes_ctx __aligned(8) key2; +}; + +static int xts_set_key(struct crypto_tfm *tfm, const u8 *in_key, + unsigned int key_len) +{ + struct crypto_aes_xts_ctx *ctx = crypto_tfm_ctx(tfm); + int ret; + + ret = ce_aes_expandkey(&ctx->key1, in_key, key_len / 2); + if (!ret) + ret = ce_aes_expandkey(&ctx->key2, &in_key[key_len / 2], + key_len / 2); + if (!ret) + return 0; + + tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + return -EINVAL; +} + +static int ecb_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + struct blkcipher_walk walk; + unsigned int blocks; + int err; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_neon_begin(); + while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { + ce_aes_ecb_encrypt(walk.dst.virt.addr, walk.src.virt.addr, + (u8 *)ctx->key_enc, num_rounds(ctx), blocks); + err = blkcipher_walk_done(desc, &walk, + walk.nbytes % AES_BLOCK_SIZE); + } + kernel_neon_end(); + return err; +} + +static int ecb_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + struct blkcipher_walk walk; + unsigned int blocks; + int err; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_neon_begin(); + while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { + ce_aes_ecb_decrypt(walk.dst.virt.addr, walk.src.virt.addr, + (u8 *)ctx->key_dec, num_rounds(ctx), blocks); + err = blkcipher_walk_done(desc, &walk, + walk.nbytes % AES_BLOCK_SIZE); + } + kernel_neon_end(); + return err; +} + +static int cbc_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + struct blkcipher_walk walk; + unsigned int blocks; + int err; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_neon_begin(); + while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { + ce_aes_cbc_encrypt(walk.dst.virt.addr, walk.src.virt.addr, + (u8 *)ctx->key_enc, num_rounds(ctx), blocks, + walk.iv); + err = blkcipher_walk_done(desc, &walk, + walk.nbytes % AES_BLOCK_SIZE); + } + kernel_neon_end(); + return err; +} + +static int cbc_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + struct blkcipher_walk walk; + unsigned int blocks; + int err; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_neon_begin(); + while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { + ce_aes_cbc_decrypt(walk.dst.virt.addr, walk.src.virt.addr, + (u8 *)ctx->key_dec, num_rounds(ctx), blocks, + walk.iv); + err = blkcipher_walk_done(desc, &walk, + walk.nbytes % AES_BLOCK_SIZE); + } + kernel_neon_end(); + return err; +} + +static int ctr_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + struct blkcipher_walk walk; + int err, blocks; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt_block(desc, &walk, AES_BLOCK_SIZE); + + kernel_neon_begin(); + while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { + ce_aes_ctr_encrypt(walk.dst.virt.addr, walk.src.virt.addr, + (u8 *)ctx->key_enc, num_rounds(ctx), blocks, + walk.iv); + nbytes -= blocks * AES_BLOCK_SIZE; + if (nbytes && nbytes == walk.nbytes % AES_BLOCK_SIZE) + break; + err = blkcipher_walk_done(desc, &walk, + walk.nbytes % AES_BLOCK_SIZE); + } + if (nbytes) { + u8 *tdst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE; + u8 *tsrc = walk.src.virt.addr + blocks * AES_BLOCK_SIZE; + u8 __aligned(8) tail[AES_BLOCK_SIZE]; + + /* + * Minimum alignment is 8 bytes, so if nbytes is <= 8, we need + * to tell aes_ctr_encrypt() to only read half a block. + */ + blocks = (nbytes <= 8) ? -1 : 1; + + ce_aes_ctr_encrypt(tail, tsrc, (u8 *)ctx->key_enc, + num_rounds(ctx), blocks, walk.iv); + memcpy(tdst, tail, nbytes); + err = blkcipher_walk_done(desc, &walk, 0); + } + kernel_neon_end(); + + return err; +} + +static int xts_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct crypto_aes_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + int err, first, rounds = num_rounds(&ctx->key1); + struct blkcipher_walk walk; + unsigned int blocks; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_neon_begin(); + for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) { + ce_aes_xts_encrypt(walk.dst.virt.addr, walk.src.virt.addr, + (u8 *)ctx->key1.key_enc, rounds, blocks, + walk.iv, (u8 *)ctx->key2.key_enc, first); + err = blkcipher_walk_done(desc, &walk, + walk.nbytes % AES_BLOCK_SIZE); + } + kernel_neon_end(); + + return err; +} + +static int xts_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct crypto_aes_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + int err, first, rounds = num_rounds(&ctx->key1); + struct blkcipher_walk walk; + unsigned int blocks; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_neon_begin(); + for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) { + ce_aes_xts_decrypt(walk.dst.virt.addr, walk.src.virt.addr, + (u8 *)ctx->key1.key_dec, rounds, blocks, + walk.iv, (u8 *)ctx->key2.key_enc, first); + err = blkcipher_walk_done(desc, &walk, + walk.nbytes % AES_BLOCK_SIZE); + } + kernel_neon_end(); + + return err; +} + +static struct crypto_alg aes_algs[] = { { + .cra_name = "__ecb-aes-ce", + .cra_driver_name = "__driver-ecb-aes-ce", + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | + CRYPTO_ALG_INTERNAL, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_blkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = ce_aes_setkey, + .encrypt = ecb_encrypt, + .decrypt = ecb_decrypt, + }, +}, { + .cra_name = "__cbc-aes-ce", + .cra_driver_name = "__driver-cbc-aes-ce", + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | + CRYPTO_ALG_INTERNAL, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_blkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = ce_aes_setkey, + .encrypt = cbc_encrypt, + .decrypt = cbc_decrypt, + }, +}, { + .cra_name = "__ctr-aes-ce", + .cra_driver_name = "__driver-ctr-aes-ce", + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | + CRYPTO_ALG_INTERNAL, + .cra_blocksize = 1, + .cra_ctxsize = sizeof(struct crypto_aes_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_blkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = ce_aes_setkey, + .encrypt = ctr_encrypt, + .decrypt = ctr_encrypt, + }, +}, { + .cra_name = "__xts-aes-ce", + .cra_driver_name = "__driver-xts-aes-ce", + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | + CRYPTO_ALG_INTERNAL, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_xts_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_blkcipher = { + .min_keysize = 2 * AES_MIN_KEY_SIZE, + .max_keysize = 2 * AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = xts_set_key, + .encrypt = xts_encrypt, + .decrypt = xts_decrypt, + }, +}, { + .cra_name = "ecb(aes)", + .cra_driver_name = "ecb-aes-ce", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct async_helper_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_init = ablk_init, + .cra_exit = ablk_exit, + .cra_ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = ablk_set_key, + .encrypt = ablk_encrypt, + .decrypt = ablk_decrypt, + } +}, { + .cra_name = "cbc(aes)", + .cra_driver_name = "cbc-aes-ce", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct async_helper_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_init = ablk_init, + .cra_exit = ablk_exit, + .cra_ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = ablk_set_key, + .encrypt = ablk_encrypt, + .decrypt = ablk_decrypt, + } +}, { + .cra_name = "ctr(aes)", + .cra_driver_name = "ctr-aes-ce", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, + .cra_blocksize = 1, + .cra_ctxsize = sizeof(struct async_helper_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_init = ablk_init, + .cra_exit = ablk_exit, + .cra_ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = ablk_set_key, + .encrypt = ablk_encrypt, + .decrypt = ablk_decrypt, + } +}, { + .cra_name = "xts(aes)", + .cra_driver_name = "xts-aes-ce", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct async_helper_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_init = ablk_init, + .cra_exit = ablk_exit, + .cra_ablkcipher = { + .min_keysize = 2 * AES_MIN_KEY_SIZE, + .max_keysize = 2 * AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = ablk_set_key, + .encrypt = ablk_encrypt, + .decrypt = ablk_decrypt, + } +} }; + +static int __init aes_init(void) +{ + if (!(elf_hwcap2 & HWCAP2_AES)) + return -ENODEV; + return crypto_register_algs(aes_algs, ARRAY_SIZE(aes_algs)); +} + +static void __exit aes_exit(void) +{ + crypto_unregister_algs(aes_algs, ARRAY_SIZE(aes_algs)); +} + +module_init(aes_init); +module_exit(aes_exit); diff --git a/arch/arm/crypto/aesbs-glue.c b/arch/arm/crypto/aesbs-glue.c index 15468fbbdea393ed020510abbb30145b52bce396..6d685298690ed228b416c7cf67c58e8b6d6f2909 100644 --- a/arch/arm/crypto/aesbs-glue.c +++ b/arch/arm/crypto/aesbs-glue.c @@ -301,7 +301,8 @@ static struct crypto_alg aesbs_algs[] = { { .cra_name = "__cbc-aes-neonbs", .cra_driver_name = "__driver-cbc-aes-neonbs", .cra_priority = 0, - .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | + CRYPTO_ALG_INTERNAL, .cra_blocksize = AES_BLOCK_SIZE, .cra_ctxsize = sizeof(struct aesbs_cbc_ctx), .cra_alignmask = 7, @@ -319,7 +320,8 @@ static struct crypto_alg aesbs_algs[] = { { .cra_name = "__ctr-aes-neonbs", .cra_driver_name = "__driver-ctr-aes-neonbs", .cra_priority = 0, - .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | + CRYPTO_ALG_INTERNAL, .cra_blocksize = 1, .cra_ctxsize = sizeof(struct aesbs_ctr_ctx), .cra_alignmask = 7, @@ -337,7 +339,8 @@ static struct crypto_alg aesbs_algs[] = { { .cra_name = "__xts-aes-neonbs", .cra_driver_name = "__driver-xts-aes-neonbs", .cra_priority = 0, - .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | + CRYPTO_ALG_INTERNAL, .cra_blocksize = AES_BLOCK_SIZE, .cra_ctxsize = sizeof(struct aesbs_xts_ctx), .cra_alignmask = 7, diff --git a/arch/arm/crypto/ghash-ce-core.S b/arch/arm/crypto/ghash-ce-core.S new file mode 100644 index 0000000000000000000000000000000000000000..f6ab8bcc9efe7f1b8e11b1b42f2530a55dd25b1b --- /dev/null +++ b/arch/arm/crypto/ghash-ce-core.S @@ -0,0 +1,94 @@ +/* + * Accelerated GHASH implementation with ARMv8 vmull.p64 instructions. + * + * Copyright (C) 2015 Linaro Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include + + SHASH .req q0 + SHASH2 .req q1 + T1 .req q2 + T2 .req q3 + MASK .req q4 + XL .req q5 + XM .req q6 + XH .req q7 + IN1 .req q7 + + SHASH_L .req d0 + SHASH_H .req d1 + SHASH2_L .req d2 + T1_L .req d4 + MASK_L .req d8 + XL_L .req d10 + XL_H .req d11 + XM_L .req d12 + XM_H .req d13 + XH_L .req d14 + + .text + .fpu crypto-neon-fp-armv8 + + /* + * void pmull_ghash_update(int blocks, u64 dg[], const char *src, + * struct ghash_key const *k, const char *head) + */ +ENTRY(pmull_ghash_update) + vld1.64 {SHASH}, [r3] + vld1.64 {XL}, [r1] + vmov.i8 MASK, #0xe1 + vext.8 SHASH2, SHASH, SHASH, #8 + vshl.u64 MASK, MASK, #57 + veor SHASH2, SHASH2, SHASH + + /* do the head block first, if supplied */ + ldr ip, [sp] + teq ip, #0 + beq 0f + vld1.64 {T1}, [ip] + teq r0, #0 + b 1f + +0: vld1.64 {T1}, [r2]! + subs r0, r0, #1 + +1: /* multiply XL by SHASH in GF(2^128) */ +#ifndef CONFIG_CPU_BIG_ENDIAN + vrev64.8 T1, T1 +#endif + vext.8 T2, XL, XL, #8 + vext.8 IN1, T1, T1, #8 + veor T1, T1, T2 + veor XL, XL, IN1 + + vmull.p64 XH, SHASH_H, XL_H @ a1 * b1 + veor T1, T1, XL + vmull.p64 XL, SHASH_L, XL_L @ a0 * b0 + vmull.p64 XM, SHASH2_L, T1_L @ (a1 + a0)(b1 + b0) + + vext.8 T1, XL, XH, #8 + veor T2, XL, XH + veor XM, XM, T1 + veor XM, XM, T2 + vmull.p64 T2, XL_L, MASK_L + + vmov XH_L, XM_H + vmov XM_H, XL_L + + veor XL, XM, T2 + vext.8 T2, XL, XL, #8 + vmull.p64 XL, XL_L, MASK_L + veor T2, T2, XH + veor XL, XL, T2 + + bne 0b + + vst1.64 {XL}, [r1] + bx lr +ENDPROC(pmull_ghash_update) diff --git a/arch/arm/crypto/ghash-ce-glue.c b/arch/arm/crypto/ghash-ce-glue.c new file mode 100644 index 0000000000000000000000000000000000000000..03a39fe2924648f91c45224c84d1a883e433a6dc --- /dev/null +++ b/arch/arm/crypto/ghash-ce-glue.c @@ -0,0 +1,320 @@ +/* + * Accelerated GHASH implementation with ARMv8 vmull.p64 instructions. + * + * Copyright (C) 2015 Linaro Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("GHASH secure hash using ARMv8 Crypto Extensions"); +MODULE_AUTHOR("Ard Biesheuvel "); +MODULE_LICENSE("GPL v2"); + +#define GHASH_BLOCK_SIZE 16 +#define GHASH_DIGEST_SIZE 16 + +struct ghash_key { + u64 a; + u64 b; +}; + +struct ghash_desc_ctx { + u64 digest[GHASH_DIGEST_SIZE/sizeof(u64)]; + u8 buf[GHASH_BLOCK_SIZE]; + u32 count; +}; + +struct ghash_async_ctx { + struct cryptd_ahash *cryptd_tfm; +}; + +asmlinkage void pmull_ghash_update(int blocks, u64 dg[], const char *src, + struct ghash_key const *k, const char *head); + +static int ghash_init(struct shash_desc *desc) +{ + struct ghash_desc_ctx *ctx = shash_desc_ctx(desc); + + *ctx = (struct ghash_desc_ctx){}; + return 0; +} + +static int ghash_update(struct shash_desc *desc, const u8 *src, + unsigned int len) +{ + struct ghash_desc_ctx *ctx = shash_desc_ctx(desc); + unsigned int partial = ctx->count % GHASH_BLOCK_SIZE; + + ctx->count += len; + + if ((partial + len) >= GHASH_BLOCK_SIZE) { + struct ghash_key *key = crypto_shash_ctx(desc->tfm); + int blocks; + + if (partial) { + int p = GHASH_BLOCK_SIZE - partial; + + memcpy(ctx->buf + partial, src, p); + src += p; + len -= p; + } + + blocks = len / GHASH_BLOCK_SIZE; + len %= GHASH_BLOCK_SIZE; + + kernel_neon_begin(); + pmull_ghash_update(blocks, ctx->digest, src, key, + partial ? ctx->buf : NULL); + kernel_neon_end(); + src += blocks * GHASH_BLOCK_SIZE; + partial = 0; + } + if (len) + memcpy(ctx->buf + partial, src, len); + return 0; +} + +static int ghash_final(struct shash_desc *desc, u8 *dst) +{ + struct ghash_desc_ctx *ctx = shash_desc_ctx(desc); + unsigned int partial = ctx->count % GHASH_BLOCK_SIZE; + + if (partial) { + struct ghash_key *key = crypto_shash_ctx(desc->tfm); + + memset(ctx->buf + partial, 0, GHASH_BLOCK_SIZE - partial); + kernel_neon_begin(); + pmull_ghash_update(1, ctx->digest, ctx->buf, key, NULL); + kernel_neon_end(); + } + put_unaligned_be64(ctx->digest[1], dst); + put_unaligned_be64(ctx->digest[0], dst + 8); + + *ctx = (struct ghash_desc_ctx){}; + return 0; +} + +static int ghash_setkey(struct crypto_shash *tfm, + const u8 *inkey, unsigned int keylen) +{ + struct ghash_key *key = crypto_shash_ctx(tfm); + u64 a, b; + + if (keylen != GHASH_BLOCK_SIZE) { + crypto_shash_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); + return -EINVAL; + } + + /* perform multiplication by 'x' in GF(2^128) */ + b = get_unaligned_be64(inkey); + a = get_unaligned_be64(inkey + 8); + + key->a = (a << 1) | (b >> 63); + key->b = (b << 1) | (a >> 63); + + if (b >> 63) + key->b ^= 0xc200000000000000UL; + + return 0; +} + +static struct shash_alg ghash_alg = { + .digestsize = GHASH_DIGEST_SIZE, + .init = ghash_init, + .update = ghash_update, + .final = ghash_final, + .setkey = ghash_setkey, + .descsize = sizeof(struct ghash_desc_ctx), + .base = { + .cra_name = "ghash", + .cra_driver_name = "__driver-ghash-ce", + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_SHASH | CRYPTO_ALG_INTERNAL, + .cra_blocksize = GHASH_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct ghash_key), + .cra_module = THIS_MODULE, + }, +}; + +static int ghash_async_init(struct ahash_request *req) +{ + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); + struct ahash_request *cryptd_req = ahash_request_ctx(req); + struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; + + if (!may_use_simd()) { + memcpy(cryptd_req, req, sizeof(*req)); + ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base); + return crypto_ahash_init(cryptd_req); + } else { + struct shash_desc *desc = cryptd_shash_desc(cryptd_req); + struct crypto_shash *child = cryptd_ahash_child(cryptd_tfm); + + desc->tfm = child; + desc->flags = req->base.flags; + return crypto_shash_init(desc); + } +} + +static int ghash_async_update(struct ahash_request *req) +{ + struct ahash_request *cryptd_req = ahash_request_ctx(req); + + if (!may_use_simd()) { + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); + struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; + + memcpy(cryptd_req, req, sizeof(*req)); + ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base); + return crypto_ahash_update(cryptd_req); + } else { + struct shash_desc *desc = cryptd_shash_desc(cryptd_req); + return shash_ahash_update(req, desc); + } +} + +static int ghash_async_final(struct ahash_request *req) +{ + struct ahash_request *cryptd_req = ahash_request_ctx(req); + + if (!may_use_simd()) { + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); + struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; + + memcpy(cryptd_req, req, sizeof(*req)); + ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base); + return crypto_ahash_final(cryptd_req); + } else { + struct shash_desc *desc = cryptd_shash_desc(cryptd_req); + return crypto_shash_final(desc, req->result); + } +} + +static int ghash_async_digest(struct ahash_request *req) +{ + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); + struct ahash_request *cryptd_req = ahash_request_ctx(req); + struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; + + if (!may_use_simd()) { + memcpy(cryptd_req, req, sizeof(*req)); + ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base); + return crypto_ahash_digest(cryptd_req); + } else { + struct shash_desc *desc = cryptd_shash_desc(cryptd_req); + struct crypto_shash *child = cryptd_ahash_child(cryptd_tfm); + + desc->tfm = child; + desc->flags = req->base.flags; + return shash_ahash_digest(req, desc); + } +} + +static int ghash_async_setkey(struct crypto_ahash *tfm, const u8 *key, + unsigned int keylen) +{ + struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); + struct crypto_ahash *child = &ctx->cryptd_tfm->base; + int err; + + crypto_ahash_clear_flags(child, CRYPTO_TFM_REQ_MASK); + crypto_ahash_set_flags(child, crypto_ahash_get_flags(tfm) + & CRYPTO_TFM_REQ_MASK); + err = crypto_ahash_setkey(child, key, keylen); + crypto_ahash_set_flags(tfm, crypto_ahash_get_flags(child) + & CRYPTO_TFM_RES_MASK); + + return err; +} + +static int ghash_async_init_tfm(struct crypto_tfm *tfm) +{ + struct cryptd_ahash *cryptd_tfm; + struct ghash_async_ctx *ctx = crypto_tfm_ctx(tfm); + + cryptd_tfm = cryptd_alloc_ahash("__driver-ghash-ce", + CRYPTO_ALG_INTERNAL, + CRYPTO_ALG_INTERNAL); + if (IS_ERR(cryptd_tfm)) + return PTR_ERR(cryptd_tfm); + ctx->cryptd_tfm = cryptd_tfm; + crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), + sizeof(struct ahash_request) + + crypto_ahash_reqsize(&cryptd_tfm->base)); + + return 0; +} + +static void ghash_async_exit_tfm(struct crypto_tfm *tfm) +{ + struct ghash_async_ctx *ctx = crypto_tfm_ctx(tfm); + + cryptd_free_ahash(ctx->cryptd_tfm); +} + +static struct ahash_alg ghash_async_alg = { + .init = ghash_async_init, + .update = ghash_async_update, + .final = ghash_async_final, + .setkey = ghash_async_setkey, + .digest = ghash_async_digest, + .halg.digestsize = GHASH_DIGEST_SIZE, + .halg.base = { + .cra_name = "ghash", + .cra_driver_name = "ghash-ce", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC, + .cra_blocksize = GHASH_BLOCK_SIZE, + .cra_type = &crypto_ahash_type, + .cra_ctxsize = sizeof(struct ghash_async_ctx), + .cra_module = THIS_MODULE, + .cra_init = ghash_async_init_tfm, + .cra_exit = ghash_async_exit_tfm, + }, +}; + +static int __init ghash_ce_mod_init(void) +{ + int err; + + if (!(elf_hwcap2 & HWCAP2_PMULL)) + return -ENODEV; + + err = crypto_register_shash(&ghash_alg); + if (err) + return err; + err = crypto_register_ahash(&ghash_async_alg); + if (err) + goto err_shash; + + return 0; + +err_shash: + crypto_unregister_shash(&ghash_alg); + return err; +} + +static void __exit ghash_ce_mod_exit(void) +{ + crypto_unregister_ahash(&ghash_async_alg); + crypto_unregister_shash(&ghash_alg); +} + +module_init(ghash_ce_mod_init); +module_exit(ghash_ce_mod_exit); diff --git a/arch/arm/crypto/sha1-ce-core.S b/arch/arm/crypto/sha1-ce-core.S new file mode 100644 index 0000000000000000000000000000000000000000..b623f51ccbcfc674e3f4fc086d91b920d0ba8198 --- /dev/null +++ b/arch/arm/crypto/sha1-ce-core.S @@ -0,0 +1,125 @@ +/* + * sha1-ce-core.S - SHA-1 secure hash using ARMv8 Crypto Extensions + * + * Copyright (C) 2015 Linaro Ltd. + * Author: Ard Biesheuvel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + + .text + .fpu crypto-neon-fp-armv8 + + k0 .req q0 + k1 .req q1 + k2 .req q2 + k3 .req q3 + + ta0 .req q4 + ta1 .req q5 + tb0 .req q5 + tb1 .req q4 + + dga .req q6 + dgb .req q7 + dgbs .req s28 + + dg0 .req q12 + dg1a0 .req q13 + dg1a1 .req q14 + dg1b0 .req q14 + dg1b1 .req q13 + + .macro add_only, op, ev, rc, s0, dg1 + .ifnb \s0 + vadd.u32 tb\ev, q\s0, \rc + .endif + sha1h.32 dg1b\ev, dg0 + .ifb \dg1 + sha1\op\().32 dg0, dg1a\ev, ta\ev + .else + sha1\op\().32 dg0, \dg1, ta\ev + .endif + .endm + + .macro add_update, op, ev, rc, s0, s1, s2, s3, dg1 + sha1su0.32 q\s0, q\s1, q\s2 + add_only \op, \ev, \rc, \s1, \dg1 + sha1su1.32 q\s0, q\s3 + .endm + + .align 6 +.Lsha1_rcon: + .word 0x5a827999, 0x5a827999, 0x5a827999, 0x5a827999 + .word 0x6ed9eba1, 0x6ed9eba1, 0x6ed9eba1, 0x6ed9eba1 + .word 0x8f1bbcdc, 0x8f1bbcdc, 0x8f1bbcdc, 0x8f1bbcdc + .word 0xca62c1d6, 0xca62c1d6, 0xca62c1d6, 0xca62c1d6 + + /* + * void sha1_ce_transform(struct sha1_state *sst, u8 const *src, + * int blocks); + */ +ENTRY(sha1_ce_transform) + /* load round constants */ + adr ip, .Lsha1_rcon + vld1.32 {k0-k1}, [ip, :128]! + vld1.32 {k2-k3}, [ip, :128] + + /* load state */ + vld1.32 {dga}, [r0] + vldr dgbs, [r0, #16] + + /* load input */ +0: vld1.32 {q8-q9}, [r1]! + vld1.32 {q10-q11}, [r1]! + subs r2, r2, #1 + +#ifndef CONFIG_CPU_BIG_ENDIAN + vrev32.8 q8, q8 + vrev32.8 q9, q9 + vrev32.8 q10, q10 + vrev32.8 q11, q11 +#endif + + vadd.u32 ta0, q8, k0 + vmov dg0, dga + + add_update c, 0, k0, 8, 9, 10, 11, dgb + add_update c, 1, k0, 9, 10, 11, 8 + add_update c, 0, k0, 10, 11, 8, 9 + add_update c, 1, k0, 11, 8, 9, 10 + add_update c, 0, k1, 8, 9, 10, 11 + + add_update p, 1, k1, 9, 10, 11, 8 + add_update p, 0, k1, 10, 11, 8, 9 + add_update p, 1, k1, 11, 8, 9, 10 + add_update p, 0, k1, 8, 9, 10, 11 + add_update p, 1, k2, 9, 10, 11, 8 + + add_update m, 0, k2, 10, 11, 8, 9 + add_update m, 1, k2, 11, 8, 9, 10 + add_update m, 0, k2, 8, 9, 10, 11 + add_update m, 1, k2, 9, 10, 11, 8 + add_update m, 0, k3, 10, 11, 8, 9 + + add_update p, 1, k3, 11, 8, 9, 10 + add_only p, 0, k3, 9 + add_only p, 1, k3, 10 + add_only p, 0, k3, 11 + add_only p, 1 + + /* update state */ + vadd.u32 dga, dga, dg0 + vadd.u32 dgb, dgb, dg1a0 + bne 0b + + /* store new state */ + vst1.32 {dga}, [r0] + vstr dgbs, [r0, #16] + bx lr +ENDPROC(sha1_ce_transform) diff --git a/arch/arm/crypto/sha1-ce-glue.c b/arch/arm/crypto/sha1-ce-glue.c new file mode 100644 index 0000000000000000000000000000000000000000..80bc2fcd241a3659f31ea48b26fededbacb41cea --- /dev/null +++ b/arch/arm/crypto/sha1-ce-glue.c @@ -0,0 +1,96 @@ +/* + * sha1-ce-glue.c - SHA-1 secure hash using ARMv8 Crypto Extensions + * + * Copyright (C) 2015 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "sha1.h" + +MODULE_DESCRIPTION("SHA1 secure hash using ARMv8 Crypto Extensions"); +MODULE_AUTHOR("Ard Biesheuvel "); +MODULE_LICENSE("GPL v2"); + +asmlinkage void sha1_ce_transform(struct sha1_state *sst, u8 const *src, + int blocks); + +static int sha1_ce_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + + if (!may_use_simd() || + (sctx->count % SHA1_BLOCK_SIZE) + len < SHA1_BLOCK_SIZE) + return sha1_update_arm(desc, data, len); + + kernel_neon_begin(); + sha1_base_do_update(desc, data, len, sha1_ce_transform); + kernel_neon_end(); + + return 0; +} + +static int sha1_ce_finup(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out) +{ + if (!may_use_simd()) + return sha1_finup_arm(desc, data, len, out); + + kernel_neon_begin(); + if (len) + sha1_base_do_update(desc, data, len, sha1_ce_transform); + sha1_base_do_finalize(desc, sha1_ce_transform); + kernel_neon_end(); + + return sha1_base_finish(desc, out); +} + +static int sha1_ce_final(struct shash_desc *desc, u8 *out) +{ + return sha1_ce_finup(desc, NULL, 0, out); +} + +static struct shash_alg alg = { + .init = sha1_base_init, + .update = sha1_ce_update, + .final = sha1_ce_final, + .finup = sha1_ce_finup, + .descsize = sizeof(struct sha1_state), + .digestsize = SHA1_DIGEST_SIZE, + .base = { + .cra_name = "sha1", + .cra_driver_name = "sha1-ce", + .cra_priority = 200, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA1_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +}; + +static int __init sha1_ce_mod_init(void) +{ + if (!(elf_hwcap2 & HWCAP2_SHA1)) + return -ENODEV; + return crypto_register_shash(&alg); +} + +static void __exit sha1_ce_mod_fini(void) +{ + crypto_unregister_shash(&alg); +} + +module_init(sha1_ce_mod_init); +module_exit(sha1_ce_mod_fini); diff --git a/arch/arm/include/asm/crypto/sha1.h b/arch/arm/crypto/sha1.h similarity index 67% rename from arch/arm/include/asm/crypto/sha1.h rename to arch/arm/crypto/sha1.h index 75e6a417416b4510702326075aaf199695a57bab..ffd8bd08b1a73e67591c2c3bac1acf4fdf544c92 100644 --- a/arch/arm/include/asm/crypto/sha1.h +++ b/arch/arm/crypto/sha1.h @@ -7,4 +7,7 @@ extern int sha1_update_arm(struct shash_desc *desc, const u8 *data, unsigned int len); +extern int sha1_finup_arm(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out); + #endif diff --git a/arch/arm/crypto/sha1_glue.c b/arch/arm/crypto/sha1_glue.c index e31b0440c6139dc932b0efd4b98aaab077cb862d..6fc73bf8766dbbf49a0ecf10d541efbe8ee31ba6 100644 --- a/arch/arm/crypto/sha1_glue.c +++ b/arch/arm/crypto/sha1_glue.c @@ -22,127 +22,47 @@ #include #include #include +#include #include -#include +#include "sha1.h" asmlinkage void sha1_block_data_order(u32 *digest, const unsigned char *data, unsigned int rounds); - -static int sha1_init(struct shash_desc *desc) -{ - struct sha1_state *sctx = shash_desc_ctx(desc); - - *sctx = (struct sha1_state){ - .state = { SHA1_H0, SHA1_H1, SHA1_H2, SHA1_H3, SHA1_H4 }, - }; - - return 0; -} - - -static int __sha1_update(struct sha1_state *sctx, const u8 *data, - unsigned int len, unsigned int partial) -{ - unsigned int done = 0; - - sctx->count += len; - - if (partial) { - done = SHA1_BLOCK_SIZE - partial; - memcpy(sctx->buffer + partial, data, done); - sha1_block_data_order(sctx->state, sctx->buffer, 1); - } - - if (len - done >= SHA1_BLOCK_SIZE) { - const unsigned int rounds = (len - done) / SHA1_BLOCK_SIZE; - sha1_block_data_order(sctx->state, data + done, rounds); - done += rounds * SHA1_BLOCK_SIZE; - } - - memcpy(sctx->buffer, data + done, len - done); - return 0; -} - - int sha1_update_arm(struct shash_desc *desc, const u8 *data, unsigned int len) { - struct sha1_state *sctx = shash_desc_ctx(desc); - unsigned int partial = sctx->count % SHA1_BLOCK_SIZE; - int res; + /* make sure casting to sha1_block_fn() is safe */ + BUILD_BUG_ON(offsetof(struct sha1_state, state) != 0); - /* Handle the fast case right here */ - if (partial + len < SHA1_BLOCK_SIZE) { - sctx->count += len; - memcpy(sctx->buffer + partial, data, len); - return 0; - } - res = __sha1_update(sctx, data, len, partial); - return res; + return sha1_base_do_update(desc, data, len, + (sha1_block_fn *)sha1_block_data_order); } EXPORT_SYMBOL_GPL(sha1_update_arm); - -/* Add padding and return the message digest. */ static int sha1_final(struct shash_desc *desc, u8 *out) { - struct sha1_state *sctx = shash_desc_ctx(desc); - unsigned int i, index, padlen; - __be32 *dst = (__be32 *)out; - __be64 bits; - static const u8 padding[SHA1_BLOCK_SIZE] = { 0x80, }; - - bits = cpu_to_be64(sctx->count << 3); - - /* Pad out to 56 mod 64 and append length */ - index = sctx->count % SHA1_BLOCK_SIZE; - padlen = (index < 56) ? (56 - index) : ((SHA1_BLOCK_SIZE+56) - index); - /* We need to fill a whole block for __sha1_update() */ - if (padlen <= 56) { - sctx->count += padlen; - memcpy(sctx->buffer + index, padding, padlen); - } else { - __sha1_update(sctx, padding, padlen, index); - } - __sha1_update(sctx, (const u8 *)&bits, sizeof(bits), 56); - - /* Store state in digest */ - for (i = 0; i < 5; i++) - dst[i] = cpu_to_be32(sctx->state[i]); - - /* Wipe context */ - memset(sctx, 0, sizeof(*sctx)); - return 0; + sha1_base_do_finalize(desc, (sha1_block_fn *)sha1_block_data_order); + return sha1_base_finish(desc, out); } - -static int sha1_export(struct shash_desc *desc, void *out) +int sha1_finup_arm(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out) { - struct sha1_state *sctx = shash_desc_ctx(desc); - memcpy(out, sctx, sizeof(*sctx)); - return 0; + sha1_base_do_update(desc, data, len, + (sha1_block_fn *)sha1_block_data_order); + return sha1_final(desc, out); } - - -static int sha1_import(struct shash_desc *desc, const void *in) -{ - struct sha1_state *sctx = shash_desc_ctx(desc); - memcpy(sctx, in, sizeof(*sctx)); - return 0; -} - +EXPORT_SYMBOL_GPL(sha1_finup_arm); static struct shash_alg alg = { .digestsize = SHA1_DIGEST_SIZE, - .init = sha1_init, + .init = sha1_base_init, .update = sha1_update_arm, .final = sha1_final, - .export = sha1_export, - .import = sha1_import, + .finup = sha1_finup_arm, .descsize = sizeof(struct sha1_state), - .statesize = sizeof(struct sha1_state), .base = { .cra_name = "sha1", .cra_driver_name= "sha1-asm", diff --git a/arch/arm/crypto/sha1_neon_glue.c b/arch/arm/crypto/sha1_neon_glue.c index 0b0083757d477f4aef8bca9e82cfb155b6eecbfb..4e22f122f96661e362b2c9e5703d25469e063ce7 100644 --- a/arch/arm/crypto/sha1_neon_glue.c +++ b/arch/arm/crypto/sha1_neon_glue.c @@ -25,147 +25,60 @@ #include #include #include -#include +#include #include #include -#include +#include "sha1.h" asmlinkage void sha1_transform_neon(void *state_h, const char *data, unsigned int rounds); - -static int sha1_neon_init(struct shash_desc *desc) -{ - struct sha1_state *sctx = shash_desc_ctx(desc); - - *sctx = (struct sha1_state){ - .state = { SHA1_H0, SHA1_H1, SHA1_H2, SHA1_H3, SHA1_H4 }, - }; - - return 0; -} - -static int __sha1_neon_update(struct shash_desc *desc, const u8 *data, - unsigned int len, unsigned int partial) -{ - struct sha1_state *sctx = shash_desc_ctx(desc); - unsigned int done = 0; - - sctx->count += len; - - if (partial) { - done = SHA1_BLOCK_SIZE - partial; - memcpy(sctx->buffer + partial, data, done); - sha1_transform_neon(sctx->state, sctx->buffer, 1); - } - - if (len - done >= SHA1_BLOCK_SIZE) { - const unsigned int rounds = (len - done) / SHA1_BLOCK_SIZE; - - sha1_transform_neon(sctx->state, data + done, rounds); - done += rounds * SHA1_BLOCK_SIZE; - } - - memcpy(sctx->buffer, data + done, len - done); - - return 0; -} - static int sha1_neon_update(struct shash_desc *desc, const u8 *data, - unsigned int len) + unsigned int len) { struct sha1_state *sctx = shash_desc_ctx(desc); - unsigned int partial = sctx->count % SHA1_BLOCK_SIZE; - int res; - /* Handle the fast case right here */ - if (partial + len < SHA1_BLOCK_SIZE) { - sctx->count += len; - memcpy(sctx->buffer + partial, data, len); + if (!may_use_simd() || + (sctx->count % SHA1_BLOCK_SIZE) + len < SHA1_BLOCK_SIZE) + return sha1_update_arm(desc, data, len); - return 0; - } - - if (!may_use_simd()) { - res = sha1_update_arm(desc, data, len); - } else { - kernel_neon_begin(); - res = __sha1_neon_update(desc, data, len, partial); - kernel_neon_end(); - } - - return res; -} - - -/* Add padding and return the message digest. */ -static int sha1_neon_final(struct shash_desc *desc, u8 *out) -{ - struct sha1_state *sctx = shash_desc_ctx(desc); - unsigned int i, index, padlen; - __be32 *dst = (__be32 *)out; - __be64 bits; - static const u8 padding[SHA1_BLOCK_SIZE] = { 0x80, }; - - bits = cpu_to_be64(sctx->count << 3); - - /* Pad out to 56 mod 64 and append length */ - index = sctx->count % SHA1_BLOCK_SIZE; - padlen = (index < 56) ? (56 - index) : ((SHA1_BLOCK_SIZE+56) - index); - if (!may_use_simd()) { - sha1_update_arm(desc, padding, padlen); - sha1_update_arm(desc, (const u8 *)&bits, sizeof(bits)); - } else { - kernel_neon_begin(); - /* We need to fill a whole block for __sha1_neon_update() */ - if (padlen <= 56) { - sctx->count += padlen; - memcpy(sctx->buffer + index, padding, padlen); - } else { - __sha1_neon_update(desc, padding, padlen, index); - } - __sha1_neon_update(desc, (const u8 *)&bits, sizeof(bits), 56); - kernel_neon_end(); - } - - /* Store state in digest */ - for (i = 0; i < 5; i++) - dst[i] = cpu_to_be32(sctx->state[i]); - - /* Wipe context */ - memset(sctx, 0, sizeof(*sctx)); + kernel_neon_begin(); + sha1_base_do_update(desc, data, len, + (sha1_block_fn *)sha1_transform_neon); + kernel_neon_end(); return 0; } -static int sha1_neon_export(struct shash_desc *desc, void *out) +static int sha1_neon_finup(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out) { - struct sha1_state *sctx = shash_desc_ctx(desc); + if (!may_use_simd()) + return sha1_finup_arm(desc, data, len, out); - memcpy(out, sctx, sizeof(*sctx)); + kernel_neon_begin(); + if (len) + sha1_base_do_update(desc, data, len, + (sha1_block_fn *)sha1_transform_neon); + sha1_base_do_finalize(desc, (sha1_block_fn *)sha1_transform_neon); + kernel_neon_end(); - return 0; + return sha1_base_finish(desc, out); } -static int sha1_neon_import(struct shash_desc *desc, const void *in) +static int sha1_neon_final(struct shash_desc *desc, u8 *out) { - struct sha1_state *sctx = shash_desc_ctx(desc); - - memcpy(sctx, in, sizeof(*sctx)); - - return 0; + return sha1_neon_finup(desc, NULL, 0, out); } static struct shash_alg alg = { .digestsize = SHA1_DIGEST_SIZE, - .init = sha1_neon_init, + .init = sha1_base_init, .update = sha1_neon_update, .final = sha1_neon_final, - .export = sha1_neon_export, - .import = sha1_neon_import, + .finup = sha1_neon_finup, .descsize = sizeof(struct sha1_state), - .statesize = sizeof(struct sha1_state), .base = { .cra_name = "sha1", .cra_driver_name = "sha1-neon", diff --git a/arch/arm/crypto/sha2-ce-core.S b/arch/arm/crypto/sha2-ce-core.S new file mode 100644 index 0000000000000000000000000000000000000000..87ec11a5f40586f6d579a37e330830140ed85663 --- /dev/null +++ b/arch/arm/crypto/sha2-ce-core.S @@ -0,0 +1,125 @@ +/* + * sha2-ce-core.S - SHA-224/256 secure hash using ARMv8 Crypto Extensions + * + * Copyright (C) 2015 Linaro Ltd. + * Author: Ard Biesheuvel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + + .text + .fpu crypto-neon-fp-armv8 + + k0 .req q7 + k1 .req q8 + rk .req r3 + + ta0 .req q9 + ta1 .req q10 + tb0 .req q10 + tb1 .req q9 + + dga .req q11 + dgb .req q12 + + dg0 .req q13 + dg1 .req q14 + dg2 .req q15 + + .macro add_only, ev, s0 + vmov dg2, dg0 + .ifnb \s0 + vld1.32 {k\ev}, [rk, :128]! + .endif + sha256h.32 dg0, dg1, tb\ev + sha256h2.32 dg1, dg2, tb\ev + .ifnb \s0 + vadd.u32 ta\ev, q\s0, k\ev + .endif + .endm + + .macro add_update, ev, s0, s1, s2, s3 + sha256su0.32 q\s0, q\s1 + add_only \ev, \s1 + sha256su1.32 q\s0, q\s2, q\s3 + .endm + + .align 6 +.Lsha256_rcon: + .word 0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5 + .word 0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5 + .word 0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3 + .word 0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174 + .word 0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc + .word 0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da + .word 0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7 + .word 0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967 + .word 0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13 + .word 0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85 + .word 0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3 + .word 0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070 + .word 0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5 + .word 0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3 + .word 0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208 + .word 0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2 + + /* + * void sha2_ce_transform(struct sha256_state *sst, u8 const *src, + int blocks); + */ +ENTRY(sha2_ce_transform) + /* load state */ + vld1.32 {dga-dgb}, [r0] + + /* load input */ +0: vld1.32 {q0-q1}, [r1]! + vld1.32 {q2-q3}, [r1]! + subs r2, r2, #1 + +#ifndef CONFIG_CPU_BIG_ENDIAN + vrev32.8 q0, q0 + vrev32.8 q1, q1 + vrev32.8 q2, q2 + vrev32.8 q3, q3 +#endif + + /* load first round constant */ + adr rk, .Lsha256_rcon + vld1.32 {k0}, [rk, :128]! + + vadd.u32 ta0, q0, k0 + vmov dg0, dga + vmov dg1, dgb + + add_update 1, 0, 1, 2, 3 + add_update 0, 1, 2, 3, 0 + add_update 1, 2, 3, 0, 1 + add_update 0, 3, 0, 1, 2 + add_update 1, 0, 1, 2, 3 + add_update 0, 1, 2, 3, 0 + add_update 1, 2, 3, 0, 1 + add_update 0, 3, 0, 1, 2 + add_update 1, 0, 1, 2, 3 + add_update 0, 1, 2, 3, 0 + add_update 1, 2, 3, 0, 1 + add_update 0, 3, 0, 1, 2 + + add_only 1, 1 + add_only 0, 2 + add_only 1, 3 + add_only 0 + + /* update state */ + vadd.u32 dga, dga, dg0 + vadd.u32 dgb, dgb, dg1 + bne 0b + + /* store new state */ + vst1.32 {dga-dgb}, [r0] + bx lr +ENDPROC(sha2_ce_transform) diff --git a/arch/arm/crypto/sha2-ce-glue.c b/arch/arm/crypto/sha2-ce-glue.c new file mode 100644 index 0000000000000000000000000000000000000000..0755b2d657f347847cc48eab55d5ce01c38bb76f --- /dev/null +++ b/arch/arm/crypto/sha2-ce-glue.c @@ -0,0 +1,114 @@ +/* + * sha2-ce-glue.c - SHA-224/SHA-256 using ARMv8 Crypto Extensions + * + * Copyright (C) 2015 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "sha256_glue.h" + +MODULE_DESCRIPTION("SHA-224/SHA-256 secure hash using ARMv8 Crypto Extensions"); +MODULE_AUTHOR("Ard Biesheuvel "); +MODULE_LICENSE("GPL v2"); + +asmlinkage void sha2_ce_transform(struct sha256_state *sst, u8 const *src, + int blocks); + +static int sha2_ce_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + struct sha256_state *sctx = shash_desc_ctx(desc); + + if (!may_use_simd() || + (sctx->count % SHA256_BLOCK_SIZE) + len < SHA256_BLOCK_SIZE) + return crypto_sha256_arm_update(desc, data, len); + + kernel_neon_begin(); + sha256_base_do_update(desc, data, len, + (sha256_block_fn *)sha2_ce_transform); + kernel_neon_end(); + + return 0; +} + +static int sha2_ce_finup(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out) +{ + if (!may_use_simd()) + return crypto_sha256_arm_finup(desc, data, len, out); + + kernel_neon_begin(); + if (len) + sha256_base_do_update(desc, data, len, + (sha256_block_fn *)sha2_ce_transform); + sha256_base_do_finalize(desc, (sha256_block_fn *)sha2_ce_transform); + kernel_neon_end(); + + return sha256_base_finish(desc, out); +} + +static int sha2_ce_final(struct shash_desc *desc, u8 *out) +{ + return sha2_ce_finup(desc, NULL, 0, out); +} + +static struct shash_alg algs[] = { { + .init = sha224_base_init, + .update = sha2_ce_update, + .final = sha2_ce_final, + .finup = sha2_ce_finup, + .descsize = sizeof(struct sha256_state), + .digestsize = SHA224_DIGEST_SIZE, + .base = { + .cra_name = "sha224", + .cra_driver_name = "sha224-ce", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA256_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +}, { + .init = sha256_base_init, + .update = sha2_ce_update, + .final = sha2_ce_final, + .finup = sha2_ce_finup, + .descsize = sizeof(struct sha256_state), + .digestsize = SHA256_DIGEST_SIZE, + .base = { + .cra_name = "sha256", + .cra_driver_name = "sha256-ce", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA256_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +} }; + +static int __init sha2_ce_mod_init(void) +{ + if (!(elf_hwcap2 & HWCAP2_SHA2)) + return -ENODEV; + return crypto_register_shashes(algs, ARRAY_SIZE(algs)); +} + +static void __exit sha2_ce_mod_fini(void) +{ + crypto_unregister_shashes(algs, ARRAY_SIZE(algs)); +} + +module_init(sha2_ce_mod_init); +module_exit(sha2_ce_mod_fini); diff --git a/arch/arm/crypto/sha256-armv4.pl b/arch/arm/crypto/sha256-armv4.pl new file mode 100644 index 0000000000000000000000000000000000000000..fac0533ea633e9803dea6b6ee6a6f019c48c5196 --- /dev/null +++ b/arch/arm/crypto/sha256-armv4.pl @@ -0,0 +1,716 @@ +#!/usr/bin/env perl + +# ==================================================================== +# Written by Andy Polyakov for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# +# Permission to use under GPL terms is granted. +# ==================================================================== + +# SHA256 block procedure for ARMv4. May 2007. + +# Performance is ~2x better than gcc 3.4 generated code and in "abso- +# lute" terms is ~2250 cycles per 64-byte block or ~35 cycles per +# byte [on single-issue Xscale PXA250 core]. + +# July 2010. +# +# Rescheduling for dual-issue pipeline resulted in 22% improvement on +# Cortex A8 core and ~20 cycles per processed byte. + +# February 2011. +# +# Profiler-assisted and platform-specific optimization resulted in 16% +# improvement on Cortex A8 core and ~15.4 cycles per processed byte. + +# September 2013. +# +# Add NEON implementation. On Cortex A8 it was measured to process one +# byte in 12.5 cycles or 23% faster than integer-only code. Snapdragon +# S4 does it in 12.5 cycles too, but it's 50% faster than integer-only +# code (meaning that latter performs sub-optimally, nothing was done +# about it). + +# May 2014. +# +# Add ARMv8 code path performing at 2.0 cpb on Apple A7. + +while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {} +open STDOUT,">$output"; + +$ctx="r0"; $t0="r0"; +$inp="r1"; $t4="r1"; +$len="r2"; $t1="r2"; +$T1="r3"; $t3="r3"; +$A="r4"; +$B="r5"; +$C="r6"; +$D="r7"; +$E="r8"; +$F="r9"; +$G="r10"; +$H="r11"; +@V=($A,$B,$C,$D,$E,$F,$G,$H); +$t2="r12"; +$Ktbl="r14"; + +@Sigma0=( 2,13,22); +@Sigma1=( 6,11,25); +@sigma0=( 7,18, 3); +@sigma1=(17,19,10); + +sub BODY_00_15 { +my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_; + +$code.=<<___ if ($i<16); +#if __ARM_ARCH__>=7 + @ ldr $t1,[$inp],#4 @ $i +# if $i==15 + str $inp,[sp,#17*4] @ make room for $t4 +# endif + eor $t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]` + add $a,$a,$t2 @ h+=Maj(a,b,c) from the past + eor $t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]` @ Sigma1(e) +# ifndef __ARMEB__ + rev $t1,$t1 +# endif +#else + @ ldrb $t1,[$inp,#3] @ $i + add $a,$a,$t2 @ h+=Maj(a,b,c) from the past + ldrb $t2,[$inp,#2] + ldrb $t0,[$inp,#1] + orr $t1,$t1,$t2,lsl#8 + ldrb $t2,[$inp],#4 + orr $t1,$t1,$t0,lsl#16 +# if $i==15 + str $inp,[sp,#17*4] @ make room for $t4 +# endif + eor $t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]` + orr $t1,$t1,$t2,lsl#24 + eor $t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]` @ Sigma1(e) +#endif +___ +$code.=<<___; + ldr $t2,[$Ktbl],#4 @ *K256++ + add $h,$h,$t1 @ h+=X[i] + str $t1,[sp,#`$i%16`*4] + eor $t1,$f,$g + add $h,$h,$t0,ror#$Sigma1[0] @ h+=Sigma1(e) + and $t1,$t1,$e + add $h,$h,$t2 @ h+=K256[i] + eor $t1,$t1,$g @ Ch(e,f,g) + eor $t0,$a,$a,ror#`$Sigma0[1]-$Sigma0[0]` + add $h,$h,$t1 @ h+=Ch(e,f,g) +#if $i==31 + and $t2,$t2,#0xff + cmp $t2,#0xf2 @ done? +#endif +#if $i<15 +# if __ARM_ARCH__>=7 + ldr $t1,[$inp],#4 @ prefetch +# else + ldrb $t1,[$inp,#3] +# endif + eor $t2,$a,$b @ a^b, b^c in next round +#else + ldr $t1,[sp,#`($i+2)%16`*4] @ from future BODY_16_xx + eor $t2,$a,$b @ a^b, b^c in next round + ldr $t4,[sp,#`($i+15)%16`*4] @ from future BODY_16_xx +#endif + eor $t0,$t0,$a,ror#`$Sigma0[2]-$Sigma0[0]` @ Sigma0(a) + and $t3,$t3,$t2 @ (b^c)&=(a^b) + add $d,$d,$h @ d+=h + eor $t3,$t3,$b @ Maj(a,b,c) + add $h,$h,$t0,ror#$Sigma0[0] @ h+=Sigma0(a) + @ add $h,$h,$t3 @ h+=Maj(a,b,c) +___ + ($t2,$t3)=($t3,$t2); +} + +sub BODY_16_XX { +my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_; + +$code.=<<___; + @ ldr $t1,[sp,#`($i+1)%16`*4] @ $i + @ ldr $t4,[sp,#`($i+14)%16`*4] + mov $t0,$t1,ror#$sigma0[0] + add $a,$a,$t2 @ h+=Maj(a,b,c) from the past + mov $t2,$t4,ror#$sigma1[0] + eor $t0,$t0,$t1,ror#$sigma0[1] + eor $t2,$t2,$t4,ror#$sigma1[1] + eor $t0,$t0,$t1,lsr#$sigma0[2] @ sigma0(X[i+1]) + ldr $t1,[sp,#`($i+0)%16`*4] + eor $t2,$t2,$t4,lsr#$sigma1[2] @ sigma1(X[i+14]) + ldr $t4,[sp,#`($i+9)%16`*4] + + add $t2,$t2,$t0 + eor $t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]` @ from BODY_00_15 + add $t1,$t1,$t2 + eor $t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]` @ Sigma1(e) + add $t1,$t1,$t4 @ X[i] +___ + &BODY_00_15(@_); +} + +$code=<<___; +#ifndef __KERNEL__ +# include "arm_arch.h" +#else +# define __ARM_ARCH__ __LINUX_ARM_ARCH__ +# define __ARM_MAX_ARCH__ 7 +#endif + +.text +#if __ARM_ARCH__<7 +.code 32 +#else +.syntax unified +# ifdef __thumb2__ +# define adrl adr +.thumb +# else +.code 32 +# endif +#endif + +.type K256,%object +.align 5 +K256: +.word 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 +.word 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 +.word 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 +.word 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 +.word 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc +.word 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da +.word 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 +.word 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 +.word 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 +.word 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 +.word 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 +.word 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 +.word 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 +.word 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 +.word 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 +.word 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 +.size K256,.-K256 +.word 0 @ terminator +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) +.LOPENSSL_armcap: +.word OPENSSL_armcap_P-sha256_block_data_order +#endif +.align 5 + +.global sha256_block_data_order +.type sha256_block_data_order,%function +sha256_block_data_order: +#if __ARM_ARCH__<7 + sub r3,pc,#8 @ sha256_block_data_order +#else + adr r3,sha256_block_data_order +#endif +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) + ldr r12,.LOPENSSL_armcap + ldr r12,[r3,r12] @ OPENSSL_armcap_P + tst r12,#ARMV8_SHA256 + bne .LARMv8 + tst r12,#ARMV7_NEON + bne .LNEON +#endif + add $len,$inp,$len,lsl#6 @ len to point at the end of inp + stmdb sp!,{$ctx,$inp,$len,r4-r11,lr} + ldmia $ctx,{$A,$B,$C,$D,$E,$F,$G,$H} + sub $Ktbl,r3,#256+32 @ K256 + sub sp,sp,#16*4 @ alloca(X[16]) +.Loop: +# if __ARM_ARCH__>=7 + ldr $t1,[$inp],#4 +# else + ldrb $t1,[$inp,#3] +# endif + eor $t3,$B,$C @ magic + eor $t2,$t2,$t2 +___ +for($i=0;$i<16;$i++) { &BODY_00_15($i,@V); unshift(@V,pop(@V)); } +$code.=".Lrounds_16_xx:\n"; +for (;$i<32;$i++) { &BODY_16_XX($i,@V); unshift(@V,pop(@V)); } +$code.=<<___; +#if __ARM_ARCH__>=7 + ite eq @ Thumb2 thing, sanity check in ARM +#endif + ldreq $t3,[sp,#16*4] @ pull ctx + bne .Lrounds_16_xx + + add $A,$A,$t2 @ h+=Maj(a,b,c) from the past + ldr $t0,[$t3,#0] + ldr $t1,[$t3,#4] + ldr $t2,[$t3,#8] + add $A,$A,$t0 + ldr $t0,[$t3,#12] + add $B,$B,$t1 + ldr $t1,[$t3,#16] + add $C,$C,$t2 + ldr $t2,[$t3,#20] + add $D,$D,$t0 + ldr $t0,[$t3,#24] + add $E,$E,$t1 + ldr $t1,[$t3,#28] + add $F,$F,$t2 + ldr $inp,[sp,#17*4] @ pull inp + ldr $t2,[sp,#18*4] @ pull inp+len + add $G,$G,$t0 + add $H,$H,$t1 + stmia $t3,{$A,$B,$C,$D,$E,$F,$G,$H} + cmp $inp,$t2 + sub $Ktbl,$Ktbl,#256 @ rewind Ktbl + bne .Loop + + add sp,sp,#`16+3`*4 @ destroy frame +#if __ARM_ARCH__>=5 + ldmia sp!,{r4-r11,pc} +#else + ldmia sp!,{r4-r11,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + bx lr @ interoperable with Thumb ISA:-) +#endif +.size sha256_block_data_order,.-sha256_block_data_order +___ +###################################################################### +# NEON stuff +# +{{{ +my @X=map("q$_",(0..3)); +my ($T0,$T1,$T2,$T3,$T4,$T5)=("q8","q9","q10","q11","d24","d25"); +my $Xfer=$t4; +my $j=0; + +sub Dlo() { shift=~m|q([1]?[0-9])|?"d".($1*2):""; } +sub Dhi() { shift=~m|q([1]?[0-9])|?"d".($1*2+1):""; } + +sub AUTOLOAD() # thunk [simplified] x86-style perlasm +{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./; + my $arg = pop; + $arg = "#$arg" if ($arg*1 eq $arg); + $code .= "\t$opcode\t".join(',',@_,$arg)."\n"; +} + +sub Xupdate() +{ use integer; + my $body = shift; + my @insns = (&$body,&$body,&$body,&$body); + my ($a,$b,$c,$d,$e,$f,$g,$h); + + &vext_8 ($T0,@X[0],@X[1],4); # X[1..4] + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &vext_8 ($T1,@X[2],@X[3],4); # X[9..12] + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T2,$T0,$sigma0[0]); + eval(shift(@insns)); + eval(shift(@insns)); + &vadd_i32 (@X[0],@X[0],$T1); # X[0..3] += X[9..12] + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T1,$T0,$sigma0[2]); + eval(shift(@insns)); + eval(shift(@insns)); + &vsli_32 ($T2,$T0,32-$sigma0[0]); + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T3,$T0,$sigma0[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &veor ($T1,$T1,$T2); + eval(shift(@insns)); + eval(shift(@insns)); + &vsli_32 ($T3,$T0,32-$sigma0[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T4,&Dhi(@X[3]),$sigma1[0]); + eval(shift(@insns)); + eval(shift(@insns)); + &veor ($T1,$T1,$T3); # sigma0(X[1..4]) + eval(shift(@insns)); + eval(shift(@insns)); + &vsli_32 ($T4,&Dhi(@X[3]),32-$sigma1[0]); + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T5,&Dhi(@X[3]),$sigma1[2]); + eval(shift(@insns)); + eval(shift(@insns)); + &vadd_i32 (@X[0],@X[0],$T1); # X[0..3] += sigma0(X[1..4]) + eval(shift(@insns)); + eval(shift(@insns)); + &veor ($T5,$T5,$T4); + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T4,&Dhi(@X[3]),$sigma1[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &vsli_32 ($T4,&Dhi(@X[3]),32-$sigma1[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &veor ($T5,$T5,$T4); # sigma1(X[14..15]) + eval(shift(@insns)); + eval(shift(@insns)); + &vadd_i32 (&Dlo(@X[0]),&Dlo(@X[0]),$T5);# X[0..1] += sigma1(X[14..15]) + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T4,&Dlo(@X[0]),$sigma1[0]); + eval(shift(@insns)); + eval(shift(@insns)); + &vsli_32 ($T4,&Dlo(@X[0]),32-$sigma1[0]); + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T5,&Dlo(@X[0]),$sigma1[2]); + eval(shift(@insns)); + eval(shift(@insns)); + &veor ($T5,$T5,$T4); + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T4,&Dlo(@X[0]),$sigma1[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &vld1_32 ("{$T0}","[$Ktbl,:128]!"); + eval(shift(@insns)); + eval(shift(@insns)); + &vsli_32 ($T4,&Dlo(@X[0]),32-$sigma1[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &veor ($T5,$T5,$T4); # sigma1(X[16..17]) + eval(shift(@insns)); + eval(shift(@insns)); + &vadd_i32 (&Dhi(@X[0]),&Dhi(@X[0]),$T5);# X[2..3] += sigma1(X[16..17]) + eval(shift(@insns)); + eval(shift(@insns)); + &vadd_i32 ($T0,$T0,@X[0]); + while($#insns>=2) { eval(shift(@insns)); } + &vst1_32 ("{$T0}","[$Xfer,:128]!"); + eval(shift(@insns)); + eval(shift(@insns)); + + push(@X,shift(@X)); # "rotate" X[] +} + +sub Xpreload() +{ use integer; + my $body = shift; + my @insns = (&$body,&$body,&$body,&$body); + my ($a,$b,$c,$d,$e,$f,$g,$h); + + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &vld1_32 ("{$T0}","[$Ktbl,:128]!"); + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &vrev32_8 (@X[0],@X[0]); + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &vadd_i32 ($T0,$T0,@X[0]); + foreach (@insns) { eval; } # remaining instructions + &vst1_32 ("{$T0}","[$Xfer,:128]!"); + + push(@X,shift(@X)); # "rotate" X[] +} + +sub body_00_15 () { + ( + '($a,$b,$c,$d,$e,$f,$g,$h)=@V;'. + '&add ($h,$h,$t1)', # h+=X[i]+K[i] + '&eor ($t1,$f,$g)', + '&eor ($t0,$e,$e,"ror#".($Sigma1[1]-$Sigma1[0]))', + '&add ($a,$a,$t2)', # h+=Maj(a,b,c) from the past + '&and ($t1,$t1,$e)', + '&eor ($t2,$t0,$e,"ror#".($Sigma1[2]-$Sigma1[0]))', # Sigma1(e) + '&eor ($t0,$a,$a,"ror#".($Sigma0[1]-$Sigma0[0]))', + '&eor ($t1,$t1,$g)', # Ch(e,f,g) + '&add ($h,$h,$t2,"ror#$Sigma1[0]")', # h+=Sigma1(e) + '&eor ($t2,$a,$b)', # a^b, b^c in next round + '&eor ($t0,$t0,$a,"ror#".($Sigma0[2]-$Sigma0[0]))', # Sigma0(a) + '&add ($h,$h,$t1)', # h+=Ch(e,f,g) + '&ldr ($t1,sprintf "[sp,#%d]",4*(($j+1)&15)) if (($j&15)!=15);'. + '&ldr ($t1,"[$Ktbl]") if ($j==15);'. + '&ldr ($t1,"[sp,#64]") if ($j==31)', + '&and ($t3,$t3,$t2)', # (b^c)&=(a^b) + '&add ($d,$d,$h)', # d+=h + '&add ($h,$h,$t0,"ror#$Sigma0[0]");'. # h+=Sigma0(a) + '&eor ($t3,$t3,$b)', # Maj(a,b,c) + '$j++; unshift(@V,pop(@V)); ($t2,$t3)=($t3,$t2);' + ) +} + +$code.=<<___; +#if __ARM_MAX_ARCH__>=7 +.arch armv7-a +.fpu neon + +.global sha256_block_data_order_neon +.type sha256_block_data_order_neon,%function +.align 4 +sha256_block_data_order_neon: +.LNEON: + stmdb sp!,{r4-r12,lr} + + sub $H,sp,#16*4+16 + adrl $Ktbl,K256 + bic $H,$H,#15 @ align for 128-bit stores + mov $t2,sp + mov sp,$H @ alloca + add $len,$inp,$len,lsl#6 @ len to point at the end of inp + + vld1.8 {@X[0]},[$inp]! + vld1.8 {@X[1]},[$inp]! + vld1.8 {@X[2]},[$inp]! + vld1.8 {@X[3]},[$inp]! + vld1.32 {$T0},[$Ktbl,:128]! + vld1.32 {$T1},[$Ktbl,:128]! + vld1.32 {$T2},[$Ktbl,:128]! + vld1.32 {$T3},[$Ktbl,:128]! + vrev32.8 @X[0],@X[0] @ yes, even on + str $ctx,[sp,#64] + vrev32.8 @X[1],@X[1] @ big-endian + str $inp,[sp,#68] + mov $Xfer,sp + vrev32.8 @X[2],@X[2] + str $len,[sp,#72] + vrev32.8 @X[3],@X[3] + str $t2,[sp,#76] @ save original sp + vadd.i32 $T0,$T0,@X[0] + vadd.i32 $T1,$T1,@X[1] + vst1.32 {$T0},[$Xfer,:128]! + vadd.i32 $T2,$T2,@X[2] + vst1.32 {$T1},[$Xfer,:128]! + vadd.i32 $T3,$T3,@X[3] + vst1.32 {$T2},[$Xfer,:128]! + vst1.32 {$T3},[$Xfer,:128]! + + ldmia $ctx,{$A-$H} + sub $Xfer,$Xfer,#64 + ldr $t1,[sp,#0] + eor $t2,$t2,$t2 + eor $t3,$B,$C + b .L_00_48 + +.align 4 +.L_00_48: +___ + &Xupdate(\&body_00_15); + &Xupdate(\&body_00_15); + &Xupdate(\&body_00_15); + &Xupdate(\&body_00_15); +$code.=<<___; + teq $t1,#0 @ check for K256 terminator + ldr $t1,[sp,#0] + sub $Xfer,$Xfer,#64 + bne .L_00_48 + + ldr $inp,[sp,#68] + ldr $t0,[sp,#72] + sub $Ktbl,$Ktbl,#256 @ rewind $Ktbl + teq $inp,$t0 + it eq + subeq $inp,$inp,#64 @ avoid SEGV + vld1.8 {@X[0]},[$inp]! @ load next input block + vld1.8 {@X[1]},[$inp]! + vld1.8 {@X[2]},[$inp]! + vld1.8 {@X[3]},[$inp]! + it ne + strne $inp,[sp,#68] + mov $Xfer,sp +___ + &Xpreload(\&body_00_15); + &Xpreload(\&body_00_15); + &Xpreload(\&body_00_15); + &Xpreload(\&body_00_15); +$code.=<<___; + ldr $t0,[$t1,#0] + add $A,$A,$t2 @ h+=Maj(a,b,c) from the past + ldr $t2,[$t1,#4] + ldr $t3,[$t1,#8] + ldr $t4,[$t1,#12] + add $A,$A,$t0 @ accumulate + ldr $t0,[$t1,#16] + add $B,$B,$t2 + ldr $t2,[$t1,#20] + add $C,$C,$t3 + ldr $t3,[$t1,#24] + add $D,$D,$t4 + ldr $t4,[$t1,#28] + add $E,$E,$t0 + str $A,[$t1],#4 + add $F,$F,$t2 + str $B,[$t1],#4 + add $G,$G,$t3 + str $C,[$t1],#4 + add $H,$H,$t4 + str $D,[$t1],#4 + stmia $t1,{$E-$H} + + ittte ne + movne $Xfer,sp + ldrne $t1,[sp,#0] + eorne $t2,$t2,$t2 + ldreq sp,[sp,#76] @ restore original sp + itt ne + eorne $t3,$B,$C + bne .L_00_48 + + ldmia sp!,{r4-r12,pc} +.size sha256_block_data_order_neon,.-sha256_block_data_order_neon +#endif +___ +}}} +###################################################################### +# ARMv8 stuff +# +{{{ +my ($ABCD,$EFGH,$abcd)=map("q$_",(0..2)); +my @MSG=map("q$_",(8..11)); +my ($W0,$W1,$ABCD_SAVE,$EFGH_SAVE)=map("q$_",(12..15)); +my $Ktbl="r3"; + +$code.=<<___; +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) + +# ifdef __thumb2__ +# define INST(a,b,c,d) .byte c,d|0xc,a,b +# else +# define INST(a,b,c,d) .byte a,b,c,d +# endif + +.type sha256_block_data_order_armv8,%function +.align 5 +sha256_block_data_order_armv8: +.LARMv8: + vld1.32 {$ABCD,$EFGH},[$ctx] +# ifdef __thumb2__ + adr $Ktbl,.LARMv8 + sub $Ktbl,$Ktbl,#.LARMv8-K256 +# else + adrl $Ktbl,K256 +# endif + add $len,$inp,$len,lsl#6 @ len to point at the end of inp + +.Loop_v8: + vld1.8 {@MSG[0]-@MSG[1]},[$inp]! + vld1.8 {@MSG[2]-@MSG[3]},[$inp]! + vld1.32 {$W0},[$Ktbl]! + vrev32.8 @MSG[0],@MSG[0] + vrev32.8 @MSG[1],@MSG[1] + vrev32.8 @MSG[2],@MSG[2] + vrev32.8 @MSG[3],@MSG[3] + vmov $ABCD_SAVE,$ABCD @ offload + vmov $EFGH_SAVE,$EFGH + teq $inp,$len +___ +for($i=0;$i<12;$i++) { +$code.=<<___; + vld1.32 {$W1},[$Ktbl]! + vadd.i32 $W0,$W0,@MSG[0] + sha256su0 @MSG[0],@MSG[1] + vmov $abcd,$ABCD + sha256h $ABCD,$EFGH,$W0 + sha256h2 $EFGH,$abcd,$W0 + sha256su1 @MSG[0],@MSG[2],@MSG[3] +___ + ($W0,$W1)=($W1,$W0); push(@MSG,shift(@MSG)); +} +$code.=<<___; + vld1.32 {$W1},[$Ktbl]! + vadd.i32 $W0,$W0,@MSG[0] + vmov $abcd,$ABCD + sha256h $ABCD,$EFGH,$W0 + sha256h2 $EFGH,$abcd,$W0 + + vld1.32 {$W0},[$Ktbl]! + vadd.i32 $W1,$W1,@MSG[1] + vmov $abcd,$ABCD + sha256h $ABCD,$EFGH,$W1 + sha256h2 $EFGH,$abcd,$W1 + + vld1.32 {$W1},[$Ktbl] + vadd.i32 $W0,$W0,@MSG[2] + sub $Ktbl,$Ktbl,#256-16 @ rewind + vmov $abcd,$ABCD + sha256h $ABCD,$EFGH,$W0 + sha256h2 $EFGH,$abcd,$W0 + + vadd.i32 $W1,$W1,@MSG[3] + vmov $abcd,$ABCD + sha256h $ABCD,$EFGH,$W1 + sha256h2 $EFGH,$abcd,$W1 + + vadd.i32 $ABCD,$ABCD,$ABCD_SAVE + vadd.i32 $EFGH,$EFGH,$EFGH_SAVE + it ne + bne .Loop_v8 + + vst1.32 {$ABCD,$EFGH},[$ctx] + + ret @ bx lr +.size sha256_block_data_order_armv8,.-sha256_block_data_order_armv8 +#endif +___ +}}} +$code.=<<___; +.asciz "SHA256 block transform for ARMv4/NEON/ARMv8, CRYPTOGAMS by " +.align 2 +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) +.comm OPENSSL_armcap_P,4,4 +#endif +___ + +open SELF,$0; +while() { + next if (/^#!/); + last if (!s/^#/@/ and !/^$/); + print; +} +close SELF; + +{ my %opcode = ( + "sha256h" => 0xf3000c40, "sha256h2" => 0xf3100c40, + "sha256su0" => 0xf3ba03c0, "sha256su1" => 0xf3200c40 ); + + sub unsha256 { + my ($mnemonic,$arg)=@_; + + if ($arg =~ m/q([0-9]+)(?:,\s*q([0-9]+))?,\s*q([0-9]+)/o) { + my $word = $opcode{$mnemonic}|(($1&7)<<13)|(($1&8)<<19) + |(($2&7)<<17)|(($2&8)<<4) + |(($3&7)<<1) |(($3&8)<<2); + # since ARMv7 instructions are always encoded little-endian. + # correct solution is to use .inst directive, but older + # assemblers don't implement it:-( + sprintf "INST(0x%02x,0x%02x,0x%02x,0x%02x)\t@ %s %s", + $word&0xff,($word>>8)&0xff, + ($word>>16)&0xff,($word>>24)&0xff, + $mnemonic,$arg; + } + } +} + +foreach (split($/,$code)) { + + s/\`([^\`]*)\`/eval $1/geo; + + s/\b(sha256\w+)\s+(q.*)/unsha256($1,$2)/geo; + + s/\bret\b/bx lr/go or + s/\bbx\s+lr\b/.word\t0xe12fff1e/go; # make it possible to compile with -march=armv4 + + print $_,"\n"; +} + +close STDOUT; # enforce flush diff --git a/arch/arm/crypto/sha256-core.S_shipped b/arch/arm/crypto/sha256-core.S_shipped new file mode 100644 index 0000000000000000000000000000000000000000..555a1a8eec90ae37bbf5d3b0ad6f7fdde1967f81 --- /dev/null +++ b/arch/arm/crypto/sha256-core.S_shipped @@ -0,0 +1,2808 @@ + +@ ==================================================================== +@ Written by Andy Polyakov for the OpenSSL +@ project. The module is, however, dual licensed under OpenSSL and +@ CRYPTOGAMS licenses depending on where you obtain it. For further +@ details see http://www.openssl.org/~appro/cryptogams/. +@ +@ Permission to use under GPL terms is granted. +@ ==================================================================== + +@ SHA256 block procedure for ARMv4. May 2007. + +@ Performance is ~2x better than gcc 3.4 generated code and in "abso- +@ lute" terms is ~2250 cycles per 64-byte block or ~35 cycles per +@ byte [on single-issue Xscale PXA250 core]. + +@ July 2010. +@ +@ Rescheduling for dual-issue pipeline resulted in 22% improvement on +@ Cortex A8 core and ~20 cycles per processed byte. + +@ February 2011. +@ +@ Profiler-assisted and platform-specific optimization resulted in 16% +@ improvement on Cortex A8 core and ~15.4 cycles per processed byte. + +@ September 2013. +@ +@ Add NEON implementation. On Cortex A8 it was measured to process one +@ byte in 12.5 cycles or 23% faster than integer-only code. Snapdragon +@ S4 does it in 12.5 cycles too, but it's 50% faster than integer-only +@ code (meaning that latter performs sub-optimally, nothing was done +@ about it). + +@ May 2014. +@ +@ Add ARMv8 code path performing at 2.0 cpb on Apple A7. + +#ifndef __KERNEL__ +# include "arm_arch.h" +#else +# define __ARM_ARCH__ __LINUX_ARM_ARCH__ +# define __ARM_MAX_ARCH__ 7 +#endif + +.text +#if __ARM_ARCH__<7 +.code 32 +#else +.syntax unified +# ifdef __thumb2__ +# define adrl adr +.thumb +# else +.code 32 +# endif +#endif + +.type K256,%object +.align 5 +K256: +.word 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 +.word 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 +.word 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 +.word 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 +.word 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc +.word 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da +.word 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 +.word 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 +.word 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 +.word 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 +.word 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 +.word 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 +.word 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 +.word 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 +.word 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 +.word 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 +.size K256,.-K256 +.word 0 @ terminator +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) +.LOPENSSL_armcap: +.word OPENSSL_armcap_P-sha256_block_data_order +#endif +.align 5 + +.global sha256_block_data_order +.type sha256_block_data_order,%function +sha256_block_data_order: +#if __ARM_ARCH__<7 + sub r3,pc,#8 @ sha256_block_data_order +#else + adr r3,sha256_block_data_order +#endif +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) + ldr r12,.LOPENSSL_armcap + ldr r12,[r3,r12] @ OPENSSL_armcap_P + tst r12,#ARMV8_SHA256 + bne .LARMv8 + tst r12,#ARMV7_NEON + bne .LNEON +#endif + add r2,r1,r2,lsl#6 @ len to point at the end of inp + stmdb sp!,{r0,r1,r2,r4-r11,lr} + ldmia r0,{r4,r5,r6,r7,r8,r9,r10,r11} + sub r14,r3,#256+32 @ K256 + sub sp,sp,#16*4 @ alloca(X[16]) +.Loop: +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 +# else + ldrb r2,[r1,#3] +# endif + eor r3,r5,r6 @ magic + eor r12,r12,r12 +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 0 +# if 0==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r8,r8,ror#5 + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r8,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 0 + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 0==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r8,r8,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r8,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r11,r11,r2 @ h+=X[i] + str r2,[sp,#0*4] + eor r2,r9,r10 + add r11,r11,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r8 + add r11,r11,r12 @ h+=K256[i] + eor r2,r2,r10 @ Ch(e,f,g) + eor r0,r4,r4,ror#11 + add r11,r11,r2 @ h+=Ch(e,f,g) +#if 0==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 0<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r4,r5 @ a^b, b^c in next round +#else + ldr r2,[sp,#2*4] @ from future BODY_16_xx + eor r12,r4,r5 @ a^b, b^c in next round + ldr r1,[sp,#15*4] @ from future BODY_16_xx +#endif + eor r0,r0,r4,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r7,r7,r11 @ d+=h + eor r3,r3,r5 @ Maj(a,b,c) + add r11,r11,r0,ror#2 @ h+=Sigma0(a) + @ add r11,r11,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 1 +# if 1==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r7,r7,ror#5 + add r11,r11,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r7,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 1 + add r11,r11,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 1==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r7,r7,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r7,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r10,r10,r2 @ h+=X[i] + str r2,[sp,#1*4] + eor r2,r8,r9 + add r10,r10,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r7 + add r10,r10,r3 @ h+=K256[i] + eor r2,r2,r9 @ Ch(e,f,g) + eor r0,r11,r11,ror#11 + add r10,r10,r2 @ h+=Ch(e,f,g) +#if 1==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 1<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r11,r4 @ a^b, b^c in next round +#else + ldr r2,[sp,#3*4] @ from future BODY_16_xx + eor r3,r11,r4 @ a^b, b^c in next round + ldr r1,[sp,#0*4] @ from future BODY_16_xx +#endif + eor r0,r0,r11,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r6,r6,r10 @ d+=h + eor r12,r12,r4 @ Maj(a,b,c) + add r10,r10,r0,ror#2 @ h+=Sigma0(a) + @ add r10,r10,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 2 +# if 2==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r6,r6,ror#5 + add r10,r10,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r6,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 2 + add r10,r10,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 2==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r6,r6,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r6,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r9,r9,r2 @ h+=X[i] + str r2,[sp,#2*4] + eor r2,r7,r8 + add r9,r9,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r6 + add r9,r9,r12 @ h+=K256[i] + eor r2,r2,r8 @ Ch(e,f,g) + eor r0,r10,r10,ror#11 + add r9,r9,r2 @ h+=Ch(e,f,g) +#if 2==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 2<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r10,r11 @ a^b, b^c in next round +#else + ldr r2,[sp,#4*4] @ from future BODY_16_xx + eor r12,r10,r11 @ a^b, b^c in next round + ldr r1,[sp,#1*4] @ from future BODY_16_xx +#endif + eor r0,r0,r10,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r5,r5,r9 @ d+=h + eor r3,r3,r11 @ Maj(a,b,c) + add r9,r9,r0,ror#2 @ h+=Sigma0(a) + @ add r9,r9,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 3 +# if 3==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r5,r5,ror#5 + add r9,r9,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r5,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 3 + add r9,r9,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 3==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r5,r5,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r5,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r8,r8,r2 @ h+=X[i] + str r2,[sp,#3*4] + eor r2,r6,r7 + add r8,r8,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r5 + add r8,r8,r3 @ h+=K256[i] + eor r2,r2,r7 @ Ch(e,f,g) + eor r0,r9,r9,ror#11 + add r8,r8,r2 @ h+=Ch(e,f,g) +#if 3==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 3<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r9,r10 @ a^b, b^c in next round +#else + ldr r2,[sp,#5*4] @ from future BODY_16_xx + eor r3,r9,r10 @ a^b, b^c in next round + ldr r1,[sp,#2*4] @ from future BODY_16_xx +#endif + eor r0,r0,r9,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r4,r4,r8 @ d+=h + eor r12,r12,r10 @ Maj(a,b,c) + add r8,r8,r0,ror#2 @ h+=Sigma0(a) + @ add r8,r8,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 4 +# if 4==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r4,r4,ror#5 + add r8,r8,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r4,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 4 + add r8,r8,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 4==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r4,r4,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r4,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r7,r7,r2 @ h+=X[i] + str r2,[sp,#4*4] + eor r2,r5,r6 + add r7,r7,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r4 + add r7,r7,r12 @ h+=K256[i] + eor r2,r2,r6 @ Ch(e,f,g) + eor r0,r8,r8,ror#11 + add r7,r7,r2 @ h+=Ch(e,f,g) +#if 4==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 4<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r8,r9 @ a^b, b^c in next round +#else + ldr r2,[sp,#6*4] @ from future BODY_16_xx + eor r12,r8,r9 @ a^b, b^c in next round + ldr r1,[sp,#3*4] @ from future BODY_16_xx +#endif + eor r0,r0,r8,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r11,r11,r7 @ d+=h + eor r3,r3,r9 @ Maj(a,b,c) + add r7,r7,r0,ror#2 @ h+=Sigma0(a) + @ add r7,r7,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 5 +# if 5==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r11,r11,ror#5 + add r7,r7,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r11,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 5 + add r7,r7,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 5==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r11,r11,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r11,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r6,r6,r2 @ h+=X[i] + str r2,[sp,#5*4] + eor r2,r4,r5 + add r6,r6,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r11 + add r6,r6,r3 @ h+=K256[i] + eor r2,r2,r5 @ Ch(e,f,g) + eor r0,r7,r7,ror#11 + add r6,r6,r2 @ h+=Ch(e,f,g) +#if 5==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 5<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r7,r8 @ a^b, b^c in next round +#else + ldr r2,[sp,#7*4] @ from future BODY_16_xx + eor r3,r7,r8 @ a^b, b^c in next round + ldr r1,[sp,#4*4] @ from future BODY_16_xx +#endif + eor r0,r0,r7,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r10,r10,r6 @ d+=h + eor r12,r12,r8 @ Maj(a,b,c) + add r6,r6,r0,ror#2 @ h+=Sigma0(a) + @ add r6,r6,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 6 +# if 6==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r10,r10,ror#5 + add r6,r6,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r10,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 6 + add r6,r6,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 6==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r10,r10,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r10,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r5,r5,r2 @ h+=X[i] + str r2,[sp,#6*4] + eor r2,r11,r4 + add r5,r5,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r10 + add r5,r5,r12 @ h+=K256[i] + eor r2,r2,r4 @ Ch(e,f,g) + eor r0,r6,r6,ror#11 + add r5,r5,r2 @ h+=Ch(e,f,g) +#if 6==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 6<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r6,r7 @ a^b, b^c in next round +#else + ldr r2,[sp,#8*4] @ from future BODY_16_xx + eor r12,r6,r7 @ a^b, b^c in next round + ldr r1,[sp,#5*4] @ from future BODY_16_xx +#endif + eor r0,r0,r6,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r9,r9,r5 @ d+=h + eor r3,r3,r7 @ Maj(a,b,c) + add r5,r5,r0,ror#2 @ h+=Sigma0(a) + @ add r5,r5,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 7 +# if 7==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r9,r9,ror#5 + add r5,r5,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r9,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 7 + add r5,r5,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 7==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r9,r9,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r9,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r4,r4,r2 @ h+=X[i] + str r2,[sp,#7*4] + eor r2,r10,r11 + add r4,r4,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r9 + add r4,r4,r3 @ h+=K256[i] + eor r2,r2,r11 @ Ch(e,f,g) + eor r0,r5,r5,ror#11 + add r4,r4,r2 @ h+=Ch(e,f,g) +#if 7==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 7<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r5,r6 @ a^b, b^c in next round +#else + ldr r2,[sp,#9*4] @ from future BODY_16_xx + eor r3,r5,r6 @ a^b, b^c in next round + ldr r1,[sp,#6*4] @ from future BODY_16_xx +#endif + eor r0,r0,r5,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r8,r8,r4 @ d+=h + eor r12,r12,r6 @ Maj(a,b,c) + add r4,r4,r0,ror#2 @ h+=Sigma0(a) + @ add r4,r4,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 8 +# if 8==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r8,r8,ror#5 + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r8,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 8 + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 8==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r8,r8,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r8,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r11,r11,r2 @ h+=X[i] + str r2,[sp,#8*4] + eor r2,r9,r10 + add r11,r11,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r8 + add r11,r11,r12 @ h+=K256[i] + eor r2,r2,r10 @ Ch(e,f,g) + eor r0,r4,r4,ror#11 + add r11,r11,r2 @ h+=Ch(e,f,g) +#if 8==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 8<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r4,r5 @ a^b, b^c in next round +#else + ldr r2,[sp,#10*4] @ from future BODY_16_xx + eor r12,r4,r5 @ a^b, b^c in next round + ldr r1,[sp,#7*4] @ from future BODY_16_xx +#endif + eor r0,r0,r4,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r7,r7,r11 @ d+=h + eor r3,r3,r5 @ Maj(a,b,c) + add r11,r11,r0,ror#2 @ h+=Sigma0(a) + @ add r11,r11,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 9 +# if 9==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r7,r7,ror#5 + add r11,r11,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r7,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 9 + add r11,r11,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 9==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r7,r7,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r7,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r10,r10,r2 @ h+=X[i] + str r2,[sp,#9*4] + eor r2,r8,r9 + add r10,r10,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r7 + add r10,r10,r3 @ h+=K256[i] + eor r2,r2,r9 @ Ch(e,f,g) + eor r0,r11,r11,ror#11 + add r10,r10,r2 @ h+=Ch(e,f,g) +#if 9==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 9<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r11,r4 @ a^b, b^c in next round +#else + ldr r2,[sp,#11*4] @ from future BODY_16_xx + eor r3,r11,r4 @ a^b, b^c in next round + ldr r1,[sp,#8*4] @ from future BODY_16_xx +#endif + eor r0,r0,r11,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r6,r6,r10 @ d+=h + eor r12,r12,r4 @ Maj(a,b,c) + add r10,r10,r0,ror#2 @ h+=Sigma0(a) + @ add r10,r10,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 10 +# if 10==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r6,r6,ror#5 + add r10,r10,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r6,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 10 + add r10,r10,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 10==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r6,r6,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r6,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r9,r9,r2 @ h+=X[i] + str r2,[sp,#10*4] + eor r2,r7,r8 + add r9,r9,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r6 + add r9,r9,r12 @ h+=K256[i] + eor r2,r2,r8 @ Ch(e,f,g) + eor r0,r10,r10,ror#11 + add r9,r9,r2 @ h+=Ch(e,f,g) +#if 10==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 10<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r10,r11 @ a^b, b^c in next round +#else + ldr r2,[sp,#12*4] @ from future BODY_16_xx + eor r12,r10,r11 @ a^b, b^c in next round + ldr r1,[sp,#9*4] @ from future BODY_16_xx +#endif + eor r0,r0,r10,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r5,r5,r9 @ d+=h + eor r3,r3,r11 @ Maj(a,b,c) + add r9,r9,r0,ror#2 @ h+=Sigma0(a) + @ add r9,r9,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 11 +# if 11==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r5,r5,ror#5 + add r9,r9,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r5,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 11 + add r9,r9,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 11==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r5,r5,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r5,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r8,r8,r2 @ h+=X[i] + str r2,[sp,#11*4] + eor r2,r6,r7 + add r8,r8,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r5 + add r8,r8,r3 @ h+=K256[i] + eor r2,r2,r7 @ Ch(e,f,g) + eor r0,r9,r9,ror#11 + add r8,r8,r2 @ h+=Ch(e,f,g) +#if 11==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 11<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r9,r10 @ a^b, b^c in next round +#else + ldr r2,[sp,#13*4] @ from future BODY_16_xx + eor r3,r9,r10 @ a^b, b^c in next round + ldr r1,[sp,#10*4] @ from future BODY_16_xx +#endif + eor r0,r0,r9,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r4,r4,r8 @ d+=h + eor r12,r12,r10 @ Maj(a,b,c) + add r8,r8,r0,ror#2 @ h+=Sigma0(a) + @ add r8,r8,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 12 +# if 12==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r4,r4,ror#5 + add r8,r8,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r4,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 12 + add r8,r8,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 12==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r4,r4,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r4,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r7,r7,r2 @ h+=X[i] + str r2,[sp,#12*4] + eor r2,r5,r6 + add r7,r7,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r4 + add r7,r7,r12 @ h+=K256[i] + eor r2,r2,r6 @ Ch(e,f,g) + eor r0,r8,r8,ror#11 + add r7,r7,r2 @ h+=Ch(e,f,g) +#if 12==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 12<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r8,r9 @ a^b, b^c in next round +#else + ldr r2,[sp,#14*4] @ from future BODY_16_xx + eor r12,r8,r9 @ a^b, b^c in next round + ldr r1,[sp,#11*4] @ from future BODY_16_xx +#endif + eor r0,r0,r8,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r11,r11,r7 @ d+=h + eor r3,r3,r9 @ Maj(a,b,c) + add r7,r7,r0,ror#2 @ h+=Sigma0(a) + @ add r7,r7,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 13 +# if 13==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r11,r11,ror#5 + add r7,r7,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r11,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 13 + add r7,r7,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 13==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r11,r11,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r11,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r6,r6,r2 @ h+=X[i] + str r2,[sp,#13*4] + eor r2,r4,r5 + add r6,r6,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r11 + add r6,r6,r3 @ h+=K256[i] + eor r2,r2,r5 @ Ch(e,f,g) + eor r0,r7,r7,ror#11 + add r6,r6,r2 @ h+=Ch(e,f,g) +#if 13==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 13<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r7,r8 @ a^b, b^c in next round +#else + ldr r2,[sp,#15*4] @ from future BODY_16_xx + eor r3,r7,r8 @ a^b, b^c in next round + ldr r1,[sp,#12*4] @ from future BODY_16_xx +#endif + eor r0,r0,r7,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r10,r10,r6 @ d+=h + eor r12,r12,r8 @ Maj(a,b,c) + add r6,r6,r0,ror#2 @ h+=Sigma0(a) + @ add r6,r6,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 14 +# if 14==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r10,r10,ror#5 + add r6,r6,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r10,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 14 + add r6,r6,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 14==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r10,r10,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r10,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r5,r5,r2 @ h+=X[i] + str r2,[sp,#14*4] + eor r2,r11,r4 + add r5,r5,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r10 + add r5,r5,r12 @ h+=K256[i] + eor r2,r2,r4 @ Ch(e,f,g) + eor r0,r6,r6,ror#11 + add r5,r5,r2 @ h+=Ch(e,f,g) +#if 14==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 14<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r6,r7 @ a^b, b^c in next round +#else + ldr r2,[sp,#0*4] @ from future BODY_16_xx + eor r12,r6,r7 @ a^b, b^c in next round + ldr r1,[sp,#13*4] @ from future BODY_16_xx +#endif + eor r0,r0,r6,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r9,r9,r5 @ d+=h + eor r3,r3,r7 @ Maj(a,b,c) + add r5,r5,r0,ror#2 @ h+=Sigma0(a) + @ add r5,r5,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 15 +# if 15==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r9,r9,ror#5 + add r5,r5,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r9,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 15 + add r5,r5,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 15==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r9,r9,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r9,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r4,r4,r2 @ h+=X[i] + str r2,[sp,#15*4] + eor r2,r10,r11 + add r4,r4,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r9 + add r4,r4,r3 @ h+=K256[i] + eor r2,r2,r11 @ Ch(e,f,g) + eor r0,r5,r5,ror#11 + add r4,r4,r2 @ h+=Ch(e,f,g) +#if 15==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 15<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r5,r6 @ a^b, b^c in next round +#else + ldr r2,[sp,#1*4] @ from future BODY_16_xx + eor r3,r5,r6 @ a^b, b^c in next round + ldr r1,[sp,#14*4] @ from future BODY_16_xx +#endif + eor r0,r0,r5,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r8,r8,r4 @ d+=h + eor r12,r12,r6 @ Maj(a,b,c) + add r4,r4,r0,ror#2 @ h+=Sigma0(a) + @ add r4,r4,r12 @ h+=Maj(a,b,c) +.Lrounds_16_xx: + @ ldr r2,[sp,#1*4] @ 16 + @ ldr r1,[sp,#14*4] + mov r0,r2,ror#7 + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#0*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#9*4] + + add r12,r12,r0 + eor r0,r8,r8,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r8,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r11,r11,r2 @ h+=X[i] + str r2,[sp,#0*4] + eor r2,r9,r10 + add r11,r11,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r8 + add r11,r11,r12 @ h+=K256[i] + eor r2,r2,r10 @ Ch(e,f,g) + eor r0,r4,r4,ror#11 + add r11,r11,r2 @ h+=Ch(e,f,g) +#if 16==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 16<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r4,r5 @ a^b, b^c in next round +#else + ldr r2,[sp,#2*4] @ from future BODY_16_xx + eor r12,r4,r5 @ a^b, b^c in next round + ldr r1,[sp,#15*4] @ from future BODY_16_xx +#endif + eor r0,r0,r4,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r7,r7,r11 @ d+=h + eor r3,r3,r5 @ Maj(a,b,c) + add r11,r11,r0,ror#2 @ h+=Sigma0(a) + @ add r11,r11,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#2*4] @ 17 + @ ldr r1,[sp,#15*4] + mov r0,r2,ror#7 + add r11,r11,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#1*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#10*4] + + add r3,r3,r0 + eor r0,r7,r7,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r7,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r10,r10,r2 @ h+=X[i] + str r2,[sp,#1*4] + eor r2,r8,r9 + add r10,r10,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r7 + add r10,r10,r3 @ h+=K256[i] + eor r2,r2,r9 @ Ch(e,f,g) + eor r0,r11,r11,ror#11 + add r10,r10,r2 @ h+=Ch(e,f,g) +#if 17==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 17<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r11,r4 @ a^b, b^c in next round +#else + ldr r2,[sp,#3*4] @ from future BODY_16_xx + eor r3,r11,r4 @ a^b, b^c in next round + ldr r1,[sp,#0*4] @ from future BODY_16_xx +#endif + eor r0,r0,r11,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r6,r6,r10 @ d+=h + eor r12,r12,r4 @ Maj(a,b,c) + add r10,r10,r0,ror#2 @ h+=Sigma0(a) + @ add r10,r10,r12 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#3*4] @ 18 + @ ldr r1,[sp,#0*4] + mov r0,r2,ror#7 + add r10,r10,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#2*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#11*4] + + add r12,r12,r0 + eor r0,r6,r6,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r6,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r9,r9,r2 @ h+=X[i] + str r2,[sp,#2*4] + eor r2,r7,r8 + add r9,r9,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r6 + add r9,r9,r12 @ h+=K256[i] + eor r2,r2,r8 @ Ch(e,f,g) + eor r0,r10,r10,ror#11 + add r9,r9,r2 @ h+=Ch(e,f,g) +#if 18==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 18<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r10,r11 @ a^b, b^c in next round +#else + ldr r2,[sp,#4*4] @ from future BODY_16_xx + eor r12,r10,r11 @ a^b, b^c in next round + ldr r1,[sp,#1*4] @ from future BODY_16_xx +#endif + eor r0,r0,r10,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r5,r5,r9 @ d+=h + eor r3,r3,r11 @ Maj(a,b,c) + add r9,r9,r0,ror#2 @ h+=Sigma0(a) + @ add r9,r9,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#4*4] @ 19 + @ ldr r1,[sp,#1*4] + mov r0,r2,ror#7 + add r9,r9,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#3*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#12*4] + + add r3,r3,r0 + eor r0,r5,r5,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r5,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r8,r8,r2 @ h+=X[i] + str r2,[sp,#3*4] + eor r2,r6,r7 + add r8,r8,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r5 + add r8,r8,r3 @ h+=K256[i] + eor r2,r2,r7 @ Ch(e,f,g) + eor r0,r9,r9,ror#11 + add r8,r8,r2 @ h+=Ch(e,f,g) +#if 19==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 19<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r9,r10 @ a^b, b^c in next round +#else + ldr r2,[sp,#5*4] @ from future BODY_16_xx + eor r3,r9,r10 @ a^b, b^c in next round + ldr r1,[sp,#2*4] @ from future BODY_16_xx +#endif + eor r0,r0,r9,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r4,r4,r8 @ d+=h + eor r12,r12,r10 @ Maj(a,b,c) + add r8,r8,r0,ror#2 @ h+=Sigma0(a) + @ add r8,r8,r12 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#5*4] @ 20 + @ ldr r1,[sp,#2*4] + mov r0,r2,ror#7 + add r8,r8,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#4*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#13*4] + + add r12,r12,r0 + eor r0,r4,r4,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r4,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r7,r7,r2 @ h+=X[i] + str r2,[sp,#4*4] + eor r2,r5,r6 + add r7,r7,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r4 + add r7,r7,r12 @ h+=K256[i] + eor r2,r2,r6 @ Ch(e,f,g) + eor r0,r8,r8,ror#11 + add r7,r7,r2 @ h+=Ch(e,f,g) +#if 20==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 20<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r8,r9 @ a^b, b^c in next round +#else + ldr r2,[sp,#6*4] @ from future BODY_16_xx + eor r12,r8,r9 @ a^b, b^c in next round + ldr r1,[sp,#3*4] @ from future BODY_16_xx +#endif + eor r0,r0,r8,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r11,r11,r7 @ d+=h + eor r3,r3,r9 @ Maj(a,b,c) + add r7,r7,r0,ror#2 @ h+=Sigma0(a) + @ add r7,r7,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#6*4] @ 21 + @ ldr r1,[sp,#3*4] + mov r0,r2,ror#7 + add r7,r7,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#5*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#14*4] + + add r3,r3,r0 + eor r0,r11,r11,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r11,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r6,r6,r2 @ h+=X[i] + str r2,[sp,#5*4] + eor r2,r4,r5 + add r6,r6,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r11 + add r6,r6,r3 @ h+=K256[i] + eor r2,r2,r5 @ Ch(e,f,g) + eor r0,r7,r7,ror#11 + add r6,r6,r2 @ h+=Ch(e,f,g) +#if 21==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 21<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r7,r8 @ a^b, b^c in next round +#else + ldr r2,[sp,#7*4] @ from future BODY_16_xx + eor r3,r7,r8 @ a^b, b^c in next round + ldr r1,[sp,#4*4] @ from future BODY_16_xx +#endif + eor r0,r0,r7,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r10,r10,r6 @ d+=h + eor r12,r12,r8 @ Maj(a,b,c) + add r6,r6,r0,ror#2 @ h+=Sigma0(a) + @ add r6,r6,r12 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#7*4] @ 22 + @ ldr r1,[sp,#4*4] + mov r0,r2,ror#7 + add r6,r6,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#6*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#15*4] + + add r12,r12,r0 + eor r0,r10,r10,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r10,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r5,r5,r2 @ h+=X[i] + str r2,[sp,#6*4] + eor r2,r11,r4 + add r5,r5,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r10 + add r5,r5,r12 @ h+=K256[i] + eor r2,r2,r4 @ Ch(e,f,g) + eor r0,r6,r6,ror#11 + add r5,r5,r2 @ h+=Ch(e,f,g) +#if 22==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 22<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r6,r7 @ a^b, b^c in next round +#else + ldr r2,[sp,#8*4] @ from future BODY_16_xx + eor r12,r6,r7 @ a^b, b^c in next round + ldr r1,[sp,#5*4] @ from future BODY_16_xx +#endif + eor r0,r0,r6,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r9,r9,r5 @ d+=h + eor r3,r3,r7 @ Maj(a,b,c) + add r5,r5,r0,ror#2 @ h+=Sigma0(a) + @ add r5,r5,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#8*4] @ 23 + @ ldr r1,[sp,#5*4] + mov r0,r2,ror#7 + add r5,r5,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#7*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#0*4] + + add r3,r3,r0 + eor r0,r9,r9,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r9,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r4,r4,r2 @ h+=X[i] + str r2,[sp,#7*4] + eor r2,r10,r11 + add r4,r4,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r9 + add r4,r4,r3 @ h+=K256[i] + eor r2,r2,r11 @ Ch(e,f,g) + eor r0,r5,r5,ror#11 + add r4,r4,r2 @ h+=Ch(e,f,g) +#if 23==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 23<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r5,r6 @ a^b, b^c in next round +#else + ldr r2,[sp,#9*4] @ from future BODY_16_xx + eor r3,r5,r6 @ a^b, b^c in next round + ldr r1,[sp,#6*4] @ from future BODY_16_xx +#endif + eor r0,r0,r5,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r8,r8,r4 @ d+=h + eor r12,r12,r6 @ Maj(a,b,c) + add r4,r4,r0,ror#2 @ h+=Sigma0(a) + @ add r4,r4,r12 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#9*4] @ 24 + @ ldr r1,[sp,#6*4] + mov r0,r2,ror#7 + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#8*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#1*4] + + add r12,r12,r0 + eor r0,r8,r8,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r8,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r11,r11,r2 @ h+=X[i] + str r2,[sp,#8*4] + eor r2,r9,r10 + add r11,r11,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r8 + add r11,r11,r12 @ h+=K256[i] + eor r2,r2,r10 @ Ch(e,f,g) + eor r0,r4,r4,ror#11 + add r11,r11,r2 @ h+=Ch(e,f,g) +#if 24==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 24<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r4,r5 @ a^b, b^c in next round +#else + ldr r2,[sp,#10*4] @ from future BODY_16_xx + eor r12,r4,r5 @ a^b, b^c in next round + ldr r1,[sp,#7*4] @ from future BODY_16_xx +#endif + eor r0,r0,r4,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r7,r7,r11 @ d+=h + eor r3,r3,r5 @ Maj(a,b,c) + add r11,r11,r0,ror#2 @ h+=Sigma0(a) + @ add r11,r11,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#10*4] @ 25 + @ ldr r1,[sp,#7*4] + mov r0,r2,ror#7 + add r11,r11,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#9*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#2*4] + + add r3,r3,r0 + eor r0,r7,r7,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r7,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r10,r10,r2 @ h+=X[i] + str r2,[sp,#9*4] + eor r2,r8,r9 + add r10,r10,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r7 + add r10,r10,r3 @ h+=K256[i] + eor r2,r2,r9 @ Ch(e,f,g) + eor r0,r11,r11,ror#11 + add r10,r10,r2 @ h+=Ch(e,f,g) +#if 25==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 25<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r11,r4 @ a^b, b^c in next round +#else + ldr r2,[sp,#11*4] @ from future BODY_16_xx + eor r3,r11,r4 @ a^b, b^c in next round + ldr r1,[sp,#8*4] @ from future BODY_16_xx +#endif + eor r0,r0,r11,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r6,r6,r10 @ d+=h + eor r12,r12,r4 @ Maj(a,b,c) + add r10,r10,r0,ror#2 @ h+=Sigma0(a) + @ add r10,r10,r12 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#11*4] @ 26 + @ ldr r1,[sp,#8*4] + mov r0,r2,ror#7 + add r10,r10,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#10*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#3*4] + + add r12,r12,r0 + eor r0,r6,r6,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r6,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r9,r9,r2 @ h+=X[i] + str r2,[sp,#10*4] + eor r2,r7,r8 + add r9,r9,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r6 + add r9,r9,r12 @ h+=K256[i] + eor r2,r2,r8 @ Ch(e,f,g) + eor r0,r10,r10,ror#11 + add r9,r9,r2 @ h+=Ch(e,f,g) +#if 26==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 26<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r10,r11 @ a^b, b^c in next round +#else + ldr r2,[sp,#12*4] @ from future BODY_16_xx + eor r12,r10,r11 @ a^b, b^c in next round + ldr r1,[sp,#9*4] @ from future BODY_16_xx +#endif + eor r0,r0,r10,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r5,r5,r9 @ d+=h + eor r3,r3,r11 @ Maj(a,b,c) + add r9,r9,r0,ror#2 @ h+=Sigma0(a) + @ add r9,r9,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#12*4] @ 27 + @ ldr r1,[sp,#9*4] + mov r0,r2,ror#7 + add r9,r9,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#11*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#4*4] + + add r3,r3,r0 + eor r0,r5,r5,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r5,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r8,r8,r2 @ h+=X[i] + str r2,[sp,#11*4] + eor r2,r6,r7 + add r8,r8,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r5 + add r8,r8,r3 @ h+=K256[i] + eor r2,r2,r7 @ Ch(e,f,g) + eor r0,r9,r9,ror#11 + add r8,r8,r2 @ h+=Ch(e,f,g) +#if 27==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 27<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r9,r10 @ a^b, b^c in next round +#else + ldr r2,[sp,#13*4] @ from future BODY_16_xx + eor r3,r9,r10 @ a^b, b^c in next round + ldr r1,[sp,#10*4] @ from future BODY_16_xx +#endif + eor r0,r0,r9,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r4,r4,r8 @ d+=h + eor r12,r12,r10 @ Maj(a,b,c) + add r8,r8,r0,ror#2 @ h+=Sigma0(a) + @ add r8,r8,r12 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#13*4] @ 28 + @ ldr r1,[sp,#10*4] + mov r0,r2,ror#7 + add r8,r8,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#12*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#5*4] + + add r12,r12,r0 + eor r0,r4,r4,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r4,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r7,r7,r2 @ h+=X[i] + str r2,[sp,#12*4] + eor r2,r5,r6 + add r7,r7,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r4 + add r7,r7,r12 @ h+=K256[i] + eor r2,r2,r6 @ Ch(e,f,g) + eor r0,r8,r8,ror#11 + add r7,r7,r2 @ h+=Ch(e,f,g) +#if 28==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 28<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r8,r9 @ a^b, b^c in next round +#else + ldr r2,[sp,#14*4] @ from future BODY_16_xx + eor r12,r8,r9 @ a^b, b^c in next round + ldr r1,[sp,#11*4] @ from future BODY_16_xx +#endif + eor r0,r0,r8,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r11,r11,r7 @ d+=h + eor r3,r3,r9 @ Maj(a,b,c) + add r7,r7,r0,ror#2 @ h+=Sigma0(a) + @ add r7,r7,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#14*4] @ 29 + @ ldr r1,[sp,#11*4] + mov r0,r2,ror#7 + add r7,r7,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#13*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#6*4] + + add r3,r3,r0 + eor r0,r11,r11,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r11,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r6,r6,r2 @ h+=X[i] + str r2,[sp,#13*4] + eor r2,r4,r5 + add r6,r6,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r11 + add r6,r6,r3 @ h+=K256[i] + eor r2,r2,r5 @ Ch(e,f,g) + eor r0,r7,r7,ror#11 + add r6,r6,r2 @ h+=Ch(e,f,g) +#if 29==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 29<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r7,r8 @ a^b, b^c in next round +#else + ldr r2,[sp,#15*4] @ from future BODY_16_xx + eor r3,r7,r8 @ a^b, b^c in next round + ldr r1,[sp,#12*4] @ from future BODY_16_xx +#endif + eor r0,r0,r7,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r10,r10,r6 @ d+=h + eor r12,r12,r8 @ Maj(a,b,c) + add r6,r6,r0,ror#2 @ h+=Sigma0(a) + @ add r6,r6,r12 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#15*4] @ 30 + @ ldr r1,[sp,#12*4] + mov r0,r2,ror#7 + add r6,r6,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#14*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#7*4] + + add r12,r12,r0 + eor r0,r10,r10,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r10,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r5,r5,r2 @ h+=X[i] + str r2,[sp,#14*4] + eor r2,r11,r4 + add r5,r5,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r10 + add r5,r5,r12 @ h+=K256[i] + eor r2,r2,r4 @ Ch(e,f,g) + eor r0,r6,r6,ror#11 + add r5,r5,r2 @ h+=Ch(e,f,g) +#if 30==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 30<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r6,r7 @ a^b, b^c in next round +#else + ldr r2,[sp,#0*4] @ from future BODY_16_xx + eor r12,r6,r7 @ a^b, b^c in next round + ldr r1,[sp,#13*4] @ from future BODY_16_xx +#endif + eor r0,r0,r6,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r9,r9,r5 @ d+=h + eor r3,r3,r7 @ Maj(a,b,c) + add r5,r5,r0,ror#2 @ h+=Sigma0(a) + @ add r5,r5,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#0*4] @ 31 + @ ldr r1,[sp,#13*4] + mov r0,r2,ror#7 + add r5,r5,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#15*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#8*4] + + add r3,r3,r0 + eor r0,r9,r9,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r9,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r4,r4,r2 @ h+=X[i] + str r2,[sp,#15*4] + eor r2,r10,r11 + add r4,r4,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r9 + add r4,r4,r3 @ h+=K256[i] + eor r2,r2,r11 @ Ch(e,f,g) + eor r0,r5,r5,ror#11 + add r4,r4,r2 @ h+=Ch(e,f,g) +#if 31==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 31<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r5,r6 @ a^b, b^c in next round +#else + ldr r2,[sp,#1*4] @ from future BODY_16_xx + eor r3,r5,r6 @ a^b, b^c in next round + ldr r1,[sp,#14*4] @ from future BODY_16_xx +#endif + eor r0,r0,r5,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r8,r8,r4 @ d+=h + eor r12,r12,r6 @ Maj(a,b,c) + add r4,r4,r0,ror#2 @ h+=Sigma0(a) + @ add r4,r4,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + ite eq @ Thumb2 thing, sanity check in ARM +#endif + ldreq r3,[sp,#16*4] @ pull ctx + bne .Lrounds_16_xx + + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + ldr r0,[r3,#0] + ldr r2,[r3,#4] + ldr r12,[r3,#8] + add r4,r4,r0 + ldr r0,[r3,#12] + add r5,r5,r2 + ldr r2,[r3,#16] + add r6,r6,r12 + ldr r12,[r3,#20] + add r7,r7,r0 + ldr r0,[r3,#24] + add r8,r8,r2 + ldr r2,[r3,#28] + add r9,r9,r12 + ldr r1,[sp,#17*4] @ pull inp + ldr r12,[sp,#18*4] @ pull inp+len + add r10,r10,r0 + add r11,r11,r2 + stmia r3,{r4,r5,r6,r7,r8,r9,r10,r11} + cmp r1,r12 + sub r14,r14,#256 @ rewind Ktbl + bne .Loop + + add sp,sp,#19*4 @ destroy frame +#if __ARM_ARCH__>=5 + ldmia sp!,{r4-r11,pc} +#else + ldmia sp!,{r4-r11,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + .word 0xe12fff1e @ interoperable with Thumb ISA:-) +#endif +.size sha256_block_data_order,.-sha256_block_data_order +#if __ARM_MAX_ARCH__>=7 +.arch armv7-a +.fpu neon + +.global sha256_block_data_order_neon +.type sha256_block_data_order_neon,%function +.align 4 +sha256_block_data_order_neon: +.LNEON: + stmdb sp!,{r4-r12,lr} + + sub r11,sp,#16*4+16 + adrl r14,K256 + bic r11,r11,#15 @ align for 128-bit stores + mov r12,sp + mov sp,r11 @ alloca + add r2,r1,r2,lsl#6 @ len to point at the end of inp + + vld1.8 {q0},[r1]! + vld1.8 {q1},[r1]! + vld1.8 {q2},[r1]! + vld1.8 {q3},[r1]! + vld1.32 {q8},[r14,:128]! + vld1.32 {q9},[r14,:128]! + vld1.32 {q10},[r14,:128]! + vld1.32 {q11},[r14,:128]! + vrev32.8 q0,q0 @ yes, even on + str r0,[sp,#64] + vrev32.8 q1,q1 @ big-endian + str r1,[sp,#68] + mov r1,sp + vrev32.8 q2,q2 + str r2,[sp,#72] + vrev32.8 q3,q3 + str r12,[sp,#76] @ save original sp + vadd.i32 q8,q8,q0 + vadd.i32 q9,q9,q1 + vst1.32 {q8},[r1,:128]! + vadd.i32 q10,q10,q2 + vst1.32 {q9},[r1,:128]! + vadd.i32 q11,q11,q3 + vst1.32 {q10},[r1,:128]! + vst1.32 {q11},[r1,:128]! + + ldmia r0,{r4-r11} + sub r1,r1,#64 + ldr r2,[sp,#0] + eor r12,r12,r12 + eor r3,r5,r6 + b .L_00_48 + +.align 4 +.L_00_48: + vext.8 q8,q0,q1,#4 + add r11,r11,r2 + eor r2,r9,r10 + eor r0,r8,r8,ror#5 + vext.8 q9,q2,q3,#4 + add r4,r4,r12 + and r2,r2,r8 + eor r12,r0,r8,ror#19 + vshr.u32 q10,q8,#7 + eor r0,r4,r4,ror#11 + eor r2,r2,r10 + vadd.i32 q0,q0,q9 + add r11,r11,r12,ror#6 + eor r12,r4,r5 + vshr.u32 q9,q8,#3 + eor r0,r0,r4,ror#20 + add r11,r11,r2 + vsli.32 q10,q8,#25 + ldr r2,[sp,#4] + and r3,r3,r12 + vshr.u32 q11,q8,#18 + add r7,r7,r11 + add r11,r11,r0,ror#2 + eor r3,r3,r5 + veor q9,q9,q10 + add r10,r10,r2 + vsli.32 q11,q8,#14 + eor r2,r8,r9 + eor r0,r7,r7,ror#5 + vshr.u32 d24,d7,#17 + add r11,r11,r3 + and r2,r2,r7 + veor q9,q9,q11 + eor r3,r0,r7,ror#19 + eor r0,r11,r11,ror#11 + vsli.32 d24,d7,#15 + eor r2,r2,r9 + add r10,r10,r3,ror#6 + vshr.u32 d25,d7,#10 + eor r3,r11,r4 + eor r0,r0,r11,ror#20 + vadd.i32 q0,q0,q9 + add r10,r10,r2 + ldr r2,[sp,#8] + veor d25,d25,d24 + and r12,r12,r3 + add r6,r6,r10 + vshr.u32 d24,d7,#19 + add r10,r10,r0,ror#2 + eor r12,r12,r4 + vsli.32 d24,d7,#13 + add r9,r9,r2 + eor r2,r7,r8 + veor d25,d25,d24 + eor r0,r6,r6,ror#5 + add r10,r10,r12 + vadd.i32 d0,d0,d25 + and r2,r2,r6 + eor r12,r0,r6,ror#19 + vshr.u32 d24,d0,#17 + eor r0,r10,r10,ror#11 + eor r2,r2,r8 + vsli.32 d24,d0,#15 + add r9,r9,r12,ror#6 + eor r12,r10,r11 + vshr.u32 d25,d0,#10 + eor r0,r0,r10,ror#20 + add r9,r9,r2 + veor d25,d25,d24 + ldr r2,[sp,#12] + and r3,r3,r12 + vshr.u32 d24,d0,#19 + add r5,r5,r9 + add r9,r9,r0,ror#2 + eor r3,r3,r11 + vld1.32 {q8},[r14,:128]! + add r8,r8,r2 + vsli.32 d24,d0,#13 + eor r2,r6,r7 + eor r0,r5,r5,ror#5 + veor d25,d25,d24 + add r9,r9,r3 + and r2,r2,r5 + vadd.i32 d1,d1,d25 + eor r3,r0,r5,ror#19 + eor r0,r9,r9,ror#11 + vadd.i32 q8,q8,q0 + eor r2,r2,r7 + add r8,r8,r3,ror#6 + eor r3,r9,r10 + eor r0,r0,r9,ror#20 + add r8,r8,r2 + ldr r2,[sp,#16] + and r12,r12,r3 + add r4,r4,r8 + vst1.32 {q8},[r1,:128]! + add r8,r8,r0,ror#2 + eor r12,r12,r10 + vext.8 q8,q1,q2,#4 + add r7,r7,r2 + eor r2,r5,r6 + eor r0,r4,r4,ror#5 + vext.8 q9,q3,q0,#4 + add r8,r8,r12 + and r2,r2,r4 + eor r12,r0,r4,ror#19 + vshr.u32 q10,q8,#7 + eor r0,r8,r8,ror#11 + eor r2,r2,r6 + vadd.i32 q1,q1,q9 + add r7,r7,r12,ror#6 + eor r12,r8,r9 + vshr.u32 q9,q8,#3 + eor r0,r0,r8,ror#20 + add r7,r7,r2 + vsli.32 q10,q8,#25 + ldr r2,[sp,#20] + and r3,r3,r12 + vshr.u32 q11,q8,#18 + add r11,r11,r7 + add r7,r7,r0,ror#2 + eor r3,r3,r9 + veor q9,q9,q10 + add r6,r6,r2 + vsli.32 q11,q8,#14 + eor r2,r4,r5 + eor r0,r11,r11,ror#5 + vshr.u32 d24,d1,#17 + add r7,r7,r3 + and r2,r2,r11 + veor q9,q9,q11 + eor r3,r0,r11,ror#19 + eor r0,r7,r7,ror#11 + vsli.32 d24,d1,#15 + eor r2,r2,r5 + add r6,r6,r3,ror#6 + vshr.u32 d25,d1,#10 + eor r3,r7,r8 + eor r0,r0,r7,ror#20 + vadd.i32 q1,q1,q9 + add r6,r6,r2 + ldr r2,[sp,#24] + veor d25,d25,d24 + and r12,r12,r3 + add r10,r10,r6 + vshr.u32 d24,d1,#19 + add r6,r6,r0,ror#2 + eor r12,r12,r8 + vsli.32 d24,d1,#13 + add r5,r5,r2 + eor r2,r11,r4 + veor d25,d25,d24 + eor r0,r10,r10,ror#5 + add r6,r6,r12 + vadd.i32 d2,d2,d25 + and r2,r2,r10 + eor r12,r0,r10,ror#19 + vshr.u32 d24,d2,#17 + eor r0,r6,r6,ror#11 + eor r2,r2,r4 + vsli.32 d24,d2,#15 + add r5,r5,r12,ror#6 + eor r12,r6,r7 + vshr.u32 d25,d2,#10 + eor r0,r0,r6,ror#20 + add r5,r5,r2 + veor d25,d25,d24 + ldr r2,[sp,#28] + and r3,r3,r12 + vshr.u32 d24,d2,#19 + add r9,r9,r5 + add r5,r5,r0,ror#2 + eor r3,r3,r7 + vld1.32 {q8},[r14,:128]! + add r4,r4,r2 + vsli.32 d24,d2,#13 + eor r2,r10,r11 + eor r0,r9,r9,ror#5 + veor d25,d25,d24 + add r5,r5,r3 + and r2,r2,r9 + vadd.i32 d3,d3,d25 + eor r3,r0,r9,ror#19 + eor r0,r5,r5,ror#11 + vadd.i32 q8,q8,q1 + eor r2,r2,r11 + add r4,r4,r3,ror#6 + eor r3,r5,r6 + eor r0,r0,r5,ror#20 + add r4,r4,r2 + ldr r2,[sp,#32] + and r12,r12,r3 + add r8,r8,r4 + vst1.32 {q8},[r1,:128]! + add r4,r4,r0,ror#2 + eor r12,r12,r6 + vext.8 q8,q2,q3,#4 + add r11,r11,r2 + eor r2,r9,r10 + eor r0,r8,r8,ror#5 + vext.8 q9,q0,q1,#4 + add r4,r4,r12 + and r2,r2,r8 + eor r12,r0,r8,ror#19 + vshr.u32 q10,q8,#7 + eor r0,r4,r4,ror#11 + eor r2,r2,r10 + vadd.i32 q2,q2,q9 + add r11,r11,r12,ror#6 + eor r12,r4,r5 + vshr.u32 q9,q8,#3 + eor r0,r0,r4,ror#20 + add r11,r11,r2 + vsli.32 q10,q8,#25 + ldr r2,[sp,#36] + and r3,r3,r12 + vshr.u32 q11,q8,#18 + add r7,r7,r11 + add r11,r11,r0,ror#2 + eor r3,r3,r5 + veor q9,q9,q10 + add r10,r10,r2 + vsli.32 q11,q8,#14 + eor r2,r8,r9 + eor r0,r7,r7,ror#5 + vshr.u32 d24,d3,#17 + add r11,r11,r3 + and r2,r2,r7 + veor q9,q9,q11 + eor r3,r0,r7,ror#19 + eor r0,r11,r11,ror#11 + vsli.32 d24,d3,#15 + eor r2,r2,r9 + add r10,r10,r3,ror#6 + vshr.u32 d25,d3,#10 + eor r3,r11,r4 + eor r0,r0,r11,ror#20 + vadd.i32 q2,q2,q9 + add r10,r10,r2 + ldr r2,[sp,#40] + veor d25,d25,d24 + and r12,r12,r3 + add r6,r6,r10 + vshr.u32 d24,d3,#19 + add r10,r10,r0,ror#2 + eor r12,r12,r4 + vsli.32 d24,d3,#13 + add r9,r9,r2 + eor r2,r7,r8 + veor d25,d25,d24 + eor r0,r6,r6,ror#5 + add r10,r10,r12 + vadd.i32 d4,d4,d25 + and r2,r2,r6 + eor r12,r0,r6,ror#19 + vshr.u32 d24,d4,#17 + eor r0,r10,r10,ror#11 + eor r2,r2,r8 + vsli.32 d24,d4,#15 + add r9,r9,r12,ror#6 + eor r12,r10,r11 + vshr.u32 d25,d4,#10 + eor r0,r0,r10,ror#20 + add r9,r9,r2 + veor d25,d25,d24 + ldr r2,[sp,#44] + and r3,r3,r12 + vshr.u32 d24,d4,#19 + add r5,r5,r9 + add r9,r9,r0,ror#2 + eor r3,r3,r11 + vld1.32 {q8},[r14,:128]! + add r8,r8,r2 + vsli.32 d24,d4,#13 + eor r2,r6,r7 + eor r0,r5,r5,ror#5 + veor d25,d25,d24 + add r9,r9,r3 + and r2,r2,r5 + vadd.i32 d5,d5,d25 + eor r3,r0,r5,ror#19 + eor r0,r9,r9,ror#11 + vadd.i32 q8,q8,q2 + eor r2,r2,r7 + add r8,r8,r3,ror#6 + eor r3,r9,r10 + eor r0,r0,r9,ror#20 + add r8,r8,r2 + ldr r2,[sp,#48] + and r12,r12,r3 + add r4,r4,r8 + vst1.32 {q8},[r1,:128]! + add r8,r8,r0,ror#2 + eor r12,r12,r10 + vext.8 q8,q3,q0,#4 + add r7,r7,r2 + eor r2,r5,r6 + eor r0,r4,r4,ror#5 + vext.8 q9,q1,q2,#4 + add r8,r8,r12 + and r2,r2,r4 + eor r12,r0,r4,ror#19 + vshr.u32 q10,q8,#7 + eor r0,r8,r8,ror#11 + eor r2,r2,r6 + vadd.i32 q3,q3,q9 + add r7,r7,r12,ror#6 + eor r12,r8,r9 + vshr.u32 q9,q8,#3 + eor r0,r0,r8,ror#20 + add r7,r7,r2 + vsli.32 q10,q8,#25 + ldr r2,[sp,#52] + and r3,r3,r12 + vshr.u32 q11,q8,#18 + add r11,r11,r7 + add r7,r7,r0,ror#2 + eor r3,r3,r9 + veor q9,q9,q10 + add r6,r6,r2 + vsli.32 q11,q8,#14 + eor r2,r4,r5 + eor r0,r11,r11,ror#5 + vshr.u32 d24,d5,#17 + add r7,r7,r3 + and r2,r2,r11 + veor q9,q9,q11 + eor r3,r0,r11,ror#19 + eor r0,r7,r7,ror#11 + vsli.32 d24,d5,#15 + eor r2,r2,r5 + add r6,r6,r3,ror#6 + vshr.u32 d25,d5,#10 + eor r3,r7,r8 + eor r0,r0,r7,ror#20 + vadd.i32 q3,q3,q9 + add r6,r6,r2 + ldr r2,[sp,#56] + veor d25,d25,d24 + and r12,r12,r3 + add r10,r10,r6 + vshr.u32 d24,d5,#19 + add r6,r6,r0,ror#2 + eor r12,r12,r8 + vsli.32 d24,d5,#13 + add r5,r5,r2 + eor r2,r11,r4 + veor d25,d25,d24 + eor r0,r10,r10,ror#5 + add r6,r6,r12 + vadd.i32 d6,d6,d25 + and r2,r2,r10 + eor r12,r0,r10,ror#19 + vshr.u32 d24,d6,#17 + eor r0,r6,r6,ror#11 + eor r2,r2,r4 + vsli.32 d24,d6,#15 + add r5,r5,r12,ror#6 + eor r12,r6,r7 + vshr.u32 d25,d6,#10 + eor r0,r0,r6,ror#20 + add r5,r5,r2 + veor d25,d25,d24 + ldr r2,[sp,#60] + and r3,r3,r12 + vshr.u32 d24,d6,#19 + add r9,r9,r5 + add r5,r5,r0,ror#2 + eor r3,r3,r7 + vld1.32 {q8},[r14,:128]! + add r4,r4,r2 + vsli.32 d24,d6,#13 + eor r2,r10,r11 + eor r0,r9,r9,ror#5 + veor d25,d25,d24 + add r5,r5,r3 + and r2,r2,r9 + vadd.i32 d7,d7,d25 + eor r3,r0,r9,ror#19 + eor r0,r5,r5,ror#11 + vadd.i32 q8,q8,q3 + eor r2,r2,r11 + add r4,r4,r3,ror#6 + eor r3,r5,r6 + eor r0,r0,r5,ror#20 + add r4,r4,r2 + ldr r2,[r14] + and r12,r12,r3 + add r8,r8,r4 + vst1.32 {q8},[r1,:128]! + add r4,r4,r0,ror#2 + eor r12,r12,r6 + teq r2,#0 @ check for K256 terminator + ldr r2,[sp,#0] + sub r1,r1,#64 + bne .L_00_48 + + ldr r1,[sp,#68] + ldr r0,[sp,#72] + sub r14,r14,#256 @ rewind r14 + teq r1,r0 + it eq + subeq r1,r1,#64 @ avoid SEGV + vld1.8 {q0},[r1]! @ load next input block + vld1.8 {q1},[r1]! + vld1.8 {q2},[r1]! + vld1.8 {q3},[r1]! + it ne + strne r1,[sp,#68] + mov r1,sp + add r11,r11,r2 + eor r2,r9,r10 + eor r0,r8,r8,ror#5 + add r4,r4,r12 + vld1.32 {q8},[r14,:128]! + and r2,r2,r8 + eor r12,r0,r8,ror#19 + eor r0,r4,r4,ror#11 + eor r2,r2,r10 + vrev32.8 q0,q0 + add r11,r11,r12,ror#6 + eor r12,r4,r5 + eor r0,r0,r4,ror#20 + add r11,r11,r2 + vadd.i32 q8,q8,q0 + ldr r2,[sp,#4] + and r3,r3,r12 + add r7,r7,r11 + add r11,r11,r0,ror#2 + eor r3,r3,r5 + add r10,r10,r2 + eor r2,r8,r9 + eor r0,r7,r7,ror#5 + add r11,r11,r3 + and r2,r2,r7 + eor r3,r0,r7,ror#19 + eor r0,r11,r11,ror#11 + eor r2,r2,r9 + add r10,r10,r3,ror#6 + eor r3,r11,r4 + eor r0,r0,r11,ror#20 + add r10,r10,r2 + ldr r2,[sp,#8] + and r12,r12,r3 + add r6,r6,r10 + add r10,r10,r0,ror#2 + eor r12,r12,r4 + add r9,r9,r2 + eor r2,r7,r8 + eor r0,r6,r6,ror#5 + add r10,r10,r12 + and r2,r2,r6 + eor r12,r0,r6,ror#19 + eor r0,r10,r10,ror#11 + eor r2,r2,r8 + add r9,r9,r12,ror#6 + eor r12,r10,r11 + eor r0,r0,r10,ror#20 + add r9,r9,r2 + ldr r2,[sp,#12] + and r3,r3,r12 + add r5,r5,r9 + add r9,r9,r0,ror#2 + eor r3,r3,r11 + add r8,r8,r2 + eor r2,r6,r7 + eor r0,r5,r5,ror#5 + add r9,r9,r3 + and r2,r2,r5 + eor r3,r0,r5,ror#19 + eor r0,r9,r9,ror#11 + eor r2,r2,r7 + add r8,r8,r3,ror#6 + eor r3,r9,r10 + eor r0,r0,r9,ror#20 + add r8,r8,r2 + ldr r2,[sp,#16] + and r12,r12,r3 + add r4,r4,r8 + add r8,r8,r0,ror#2 + eor r12,r12,r10 + vst1.32 {q8},[r1,:128]! + add r7,r7,r2 + eor r2,r5,r6 + eor r0,r4,r4,ror#5 + add r8,r8,r12 + vld1.32 {q8},[r14,:128]! + and r2,r2,r4 + eor r12,r0,r4,ror#19 + eor r0,r8,r8,ror#11 + eor r2,r2,r6 + vrev32.8 q1,q1 + add r7,r7,r12,ror#6 + eor r12,r8,r9 + eor r0,r0,r8,ror#20 + add r7,r7,r2 + vadd.i32 q8,q8,q1 + ldr r2,[sp,#20] + and r3,r3,r12 + add r11,r11,r7 + add r7,r7,r0,ror#2 + eor r3,r3,r9 + add r6,r6,r2 + eor r2,r4,r5 + eor r0,r11,r11,ror#5 + add r7,r7,r3 + and r2,r2,r11 + eor r3,r0,r11,ror#19 + eor r0,r7,r7,ror#11 + eor r2,r2,r5 + add r6,r6,r3,ror#6 + eor r3,r7,r8 + eor r0,r0,r7,ror#20 + add r6,r6,r2 + ldr r2,[sp,#24] + and r12,r12,r3 + add r10,r10,r6 + add r6,r6,r0,ror#2 + eor r12,r12,r8 + add r5,r5,r2 + eor r2,r11,r4 + eor r0,r10,r10,ror#5 + add r6,r6,r12 + and r2,r2,r10 + eor r12,r0,r10,ror#19 + eor r0,r6,r6,ror#11 + eor r2,r2,r4 + add r5,r5,r12,ror#6 + eor r12,r6,r7 + eor r0,r0,r6,ror#20 + add r5,r5,r2 + ldr r2,[sp,#28] + and r3,r3,r12 + add r9,r9,r5 + add r5,r5,r0,ror#2 + eor r3,r3,r7 + add r4,r4,r2 + eor r2,r10,r11 + eor r0,r9,r9,ror#5 + add r5,r5,r3 + and r2,r2,r9 + eor r3,r0,r9,ror#19 + eor r0,r5,r5,ror#11 + eor r2,r2,r11 + add r4,r4,r3,ror#6 + eor r3,r5,r6 + eor r0,r0,r5,ror#20 + add r4,r4,r2 + ldr r2,[sp,#32] + and r12,r12,r3 + add r8,r8,r4 + add r4,r4,r0,ror#2 + eor r12,r12,r6 + vst1.32 {q8},[r1,:128]! + add r11,r11,r2 + eor r2,r9,r10 + eor r0,r8,r8,ror#5 + add r4,r4,r12 + vld1.32 {q8},[r14,:128]! + and r2,r2,r8 + eor r12,r0,r8,ror#19 + eor r0,r4,r4,ror#11 + eor r2,r2,r10 + vrev32.8 q2,q2 + add r11,r11,r12,ror#6 + eor r12,r4,r5 + eor r0,r0,r4,ror#20 + add r11,r11,r2 + vadd.i32 q8,q8,q2 + ldr r2,[sp,#36] + and r3,r3,r12 + add r7,r7,r11 + add r11,r11,r0,ror#2 + eor r3,r3,r5 + add r10,r10,r2 + eor r2,r8,r9 + eor r0,r7,r7,ror#5 + add r11,r11,r3 + and r2,r2,r7 + eor r3,r0,r7,ror#19 + eor r0,r11,r11,ror#11 + eor r2,r2,r9 + add r10,r10,r3,ror#6 + eor r3,r11,r4 + eor r0,r0,r11,ror#20 + add r10,r10,r2 + ldr r2,[sp,#40] + and r12,r12,r3 + add r6,r6,r10 + add r10,r10,r0,ror#2 + eor r12,r12,r4 + add r9,r9,r2 + eor r2,r7,r8 + eor r0,r6,r6,ror#5 + add r10,r10,r12 + and r2,r2,r6 + eor r12,r0,r6,ror#19 + eor r0,r10,r10,ror#11 + eor r2,r2,r8 + add r9,r9,r12,ror#6 + eor r12,r10,r11 + eor r0,r0,r10,ror#20 + add r9,r9,r2 + ldr r2,[sp,#44] + and r3,r3,r12 + add r5,r5,r9 + add r9,r9,r0,ror#2 + eor r3,r3,r11 + add r8,r8,r2 + eor r2,r6,r7 + eor r0,r5,r5,ror#5 + add r9,r9,r3 + and r2,r2,r5 + eor r3,r0,r5,ror#19 + eor r0,r9,r9,ror#11 + eor r2,r2,r7 + add r8,r8,r3,ror#6 + eor r3,r9,r10 + eor r0,r0,r9,ror#20 + add r8,r8,r2 + ldr r2,[sp,#48] + and r12,r12,r3 + add r4,r4,r8 + add r8,r8,r0,ror#2 + eor r12,r12,r10 + vst1.32 {q8},[r1,:128]! + add r7,r7,r2 + eor r2,r5,r6 + eor r0,r4,r4,ror#5 + add r8,r8,r12 + vld1.32 {q8},[r14,:128]! + and r2,r2,r4 + eor r12,r0,r4,ror#19 + eor r0,r8,r8,ror#11 + eor r2,r2,r6 + vrev32.8 q3,q3 + add r7,r7,r12,ror#6 + eor r12,r8,r9 + eor r0,r0,r8,ror#20 + add r7,r7,r2 + vadd.i32 q8,q8,q3 + ldr r2,[sp,#52] + and r3,r3,r12 + add r11,r11,r7 + add r7,r7,r0,ror#2 + eor r3,r3,r9 + add r6,r6,r2 + eor r2,r4,r5 + eor r0,r11,r11,ror#5 + add r7,r7,r3 + and r2,r2,r11 + eor r3,r0,r11,ror#19 + eor r0,r7,r7,ror#11 + eor r2,r2,r5 + add r6,r6,r3,ror#6 + eor r3,r7,r8 + eor r0,r0,r7,ror#20 + add r6,r6,r2 + ldr r2,[sp,#56] + and r12,r12,r3 + add r10,r10,r6 + add r6,r6,r0,ror#2 + eor r12,r12,r8 + add r5,r5,r2 + eor r2,r11,r4 + eor r0,r10,r10,ror#5 + add r6,r6,r12 + and r2,r2,r10 + eor r12,r0,r10,ror#19 + eor r0,r6,r6,ror#11 + eor r2,r2,r4 + add r5,r5,r12,ror#6 + eor r12,r6,r7 + eor r0,r0,r6,ror#20 + add r5,r5,r2 + ldr r2,[sp,#60] + and r3,r3,r12 + add r9,r9,r5 + add r5,r5,r0,ror#2 + eor r3,r3,r7 + add r4,r4,r2 + eor r2,r10,r11 + eor r0,r9,r9,ror#5 + add r5,r5,r3 + and r2,r2,r9 + eor r3,r0,r9,ror#19 + eor r0,r5,r5,ror#11 + eor r2,r2,r11 + add r4,r4,r3,ror#6 + eor r3,r5,r6 + eor r0,r0,r5,ror#20 + add r4,r4,r2 + ldr r2,[sp,#64] + and r12,r12,r3 + add r8,r8,r4 + add r4,r4,r0,ror#2 + eor r12,r12,r6 + vst1.32 {q8},[r1,:128]! + ldr r0,[r2,#0] + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + ldr r12,[r2,#4] + ldr r3,[r2,#8] + ldr r1,[r2,#12] + add r4,r4,r0 @ accumulate + ldr r0,[r2,#16] + add r5,r5,r12 + ldr r12,[r2,#20] + add r6,r6,r3 + ldr r3,[r2,#24] + add r7,r7,r1 + ldr r1,[r2,#28] + add r8,r8,r0 + str r4,[r2],#4 + add r9,r9,r12 + str r5,[r2],#4 + add r10,r10,r3 + str r6,[r2],#4 + add r11,r11,r1 + str r7,[r2],#4 + stmia r2,{r8-r11} + + ittte ne + movne r1,sp + ldrne r2,[sp,#0] + eorne r12,r12,r12 + ldreq sp,[sp,#76] @ restore original sp + itt ne + eorne r3,r5,r6 + bne .L_00_48 + + ldmia sp!,{r4-r12,pc} +.size sha256_block_data_order_neon,.-sha256_block_data_order_neon +#endif +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) + +# ifdef __thumb2__ +# define INST(a,b,c,d) .byte c,d|0xc,a,b +# else +# define INST(a,b,c,d) .byte a,b,c,d +# endif + +.type sha256_block_data_order_armv8,%function +.align 5 +sha256_block_data_order_armv8: +.LARMv8: + vld1.32 {q0,q1},[r0] +# ifdef __thumb2__ + adr r3,.LARMv8 + sub r3,r3,#.LARMv8-K256 +# else + adrl r3,K256 +# endif + add r2,r1,r2,lsl#6 @ len to point at the end of inp + +.Loop_v8: + vld1.8 {q8-q9},[r1]! + vld1.8 {q10-q11},[r1]! + vld1.32 {q12},[r3]! + vrev32.8 q8,q8 + vrev32.8 q9,q9 + vrev32.8 q10,q10 + vrev32.8 q11,q11 + vmov q14,q0 @ offload + vmov q15,q1 + teq r1,r2 + vld1.32 {q13},[r3]! + vadd.i32 q12,q12,q8 + INST(0xe2,0x03,0xfa,0xf3) @ sha256su0 q8,q9 + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + INST(0xe6,0x0c,0x64,0xf3) @ sha256su1 q8,q10,q11 + vld1.32 {q12},[r3]! + vadd.i32 q13,q13,q9 + INST(0xe4,0x23,0xfa,0xf3) @ sha256su0 q9,q10 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + INST(0xe0,0x2c,0x66,0xf3) @ sha256su1 q9,q11,q8 + vld1.32 {q13},[r3]! + vadd.i32 q12,q12,q10 + INST(0xe6,0x43,0xfa,0xf3) @ sha256su0 q10,q11 + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + INST(0xe2,0x4c,0x60,0xf3) @ sha256su1 q10,q8,q9 + vld1.32 {q12},[r3]! + vadd.i32 q13,q13,q11 + INST(0xe0,0x63,0xfa,0xf3) @ sha256su0 q11,q8 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + INST(0xe4,0x6c,0x62,0xf3) @ sha256su1 q11,q9,q10 + vld1.32 {q13},[r3]! + vadd.i32 q12,q12,q8 + INST(0xe2,0x03,0xfa,0xf3) @ sha256su0 q8,q9 + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + INST(0xe6,0x0c,0x64,0xf3) @ sha256su1 q8,q10,q11 + vld1.32 {q12},[r3]! + vadd.i32 q13,q13,q9 + INST(0xe4,0x23,0xfa,0xf3) @ sha256su0 q9,q10 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + INST(0xe0,0x2c,0x66,0xf3) @ sha256su1 q9,q11,q8 + vld1.32 {q13},[r3]! + vadd.i32 q12,q12,q10 + INST(0xe6,0x43,0xfa,0xf3) @ sha256su0 q10,q11 + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + INST(0xe2,0x4c,0x60,0xf3) @ sha256su1 q10,q8,q9 + vld1.32 {q12},[r3]! + vadd.i32 q13,q13,q11 + INST(0xe0,0x63,0xfa,0xf3) @ sha256su0 q11,q8 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + INST(0xe4,0x6c,0x62,0xf3) @ sha256su1 q11,q9,q10 + vld1.32 {q13},[r3]! + vadd.i32 q12,q12,q8 + INST(0xe2,0x03,0xfa,0xf3) @ sha256su0 q8,q9 + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + INST(0xe6,0x0c,0x64,0xf3) @ sha256su1 q8,q10,q11 + vld1.32 {q12},[r3]! + vadd.i32 q13,q13,q9 + INST(0xe4,0x23,0xfa,0xf3) @ sha256su0 q9,q10 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + INST(0xe0,0x2c,0x66,0xf3) @ sha256su1 q9,q11,q8 + vld1.32 {q13},[r3]! + vadd.i32 q12,q12,q10 + INST(0xe6,0x43,0xfa,0xf3) @ sha256su0 q10,q11 + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + INST(0xe2,0x4c,0x60,0xf3) @ sha256su1 q10,q8,q9 + vld1.32 {q12},[r3]! + vadd.i32 q13,q13,q11 + INST(0xe0,0x63,0xfa,0xf3) @ sha256su0 q11,q8 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + INST(0xe4,0x6c,0x62,0xf3) @ sha256su1 q11,q9,q10 + vld1.32 {q13},[r3]! + vadd.i32 q12,q12,q8 + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + + vld1.32 {q12},[r3]! + vadd.i32 q13,q13,q9 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + + vld1.32 {q13},[r3] + vadd.i32 q12,q12,q10 + sub r3,r3,#256-16 @ rewind + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + + vadd.i32 q13,q13,q11 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + + vadd.i32 q0,q0,q14 + vadd.i32 q1,q1,q15 + it ne + bne .Loop_v8 + + vst1.32 {q0,q1},[r0] + + bx lr @ bx lr +.size sha256_block_data_order_armv8,.-sha256_block_data_order_armv8 +#endif +.asciz "SHA256 block transform for ARMv4/NEON/ARMv8, CRYPTOGAMS by " +.align 2 +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) +.comm OPENSSL_armcap_P,4,4 +#endif diff --git a/arch/arm/crypto/sha256_glue.c b/arch/arm/crypto/sha256_glue.c new file mode 100644 index 0000000000000000000000000000000000000000..a84e869ef900e21a7330d146188efa41a02fa301 --- /dev/null +++ b/arch/arm/crypto/sha256_glue.c @@ -0,0 +1,128 @@ +/* + * Glue code for the SHA256 Secure Hash Algorithm assembly implementation + * using optimized ARM assembler and NEON instructions. + * + * Copyright 2015 Google Inc. + * + * This file is based on sha256_ssse3_glue.c: + * Copyright (C) 2013 Intel Corporation + * Author: Tim Chen + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sha256_glue.h" + +asmlinkage void sha256_block_data_order(u32 *digest, const void *data, + unsigned int num_blks); + +int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + /* make sure casting to sha256_block_fn() is safe */ + BUILD_BUG_ON(offsetof(struct sha256_state, state) != 0); + + return sha256_base_do_update(desc, data, len, + (sha256_block_fn *)sha256_block_data_order); +} +EXPORT_SYMBOL(crypto_sha256_arm_update); + +static int sha256_final(struct shash_desc *desc, u8 *out) +{ + sha256_base_do_finalize(desc, + (sha256_block_fn *)sha256_block_data_order); + return sha256_base_finish(desc, out); +} + +int crypto_sha256_arm_finup(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out) +{ + sha256_base_do_update(desc, data, len, + (sha256_block_fn *)sha256_block_data_order); + return sha256_final(desc, out); +} +EXPORT_SYMBOL(crypto_sha256_arm_finup); + +static struct shash_alg algs[] = { { + .digestsize = SHA256_DIGEST_SIZE, + .init = sha256_base_init, + .update = crypto_sha256_arm_update, + .final = sha256_final, + .finup = crypto_sha256_arm_finup, + .descsize = sizeof(struct sha256_state), + .base = { + .cra_name = "sha256", + .cra_driver_name = "sha256-asm", + .cra_priority = 150, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA256_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +}, { + .digestsize = SHA224_DIGEST_SIZE, + .init = sha224_base_init, + .update = crypto_sha256_arm_update, + .final = sha256_final, + .finup = crypto_sha256_arm_finup, + .descsize = sizeof(struct sha256_state), + .base = { + .cra_name = "sha224", + .cra_driver_name = "sha224-asm", + .cra_priority = 150, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA224_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +} }; + +static int __init sha256_mod_init(void) +{ + int res = crypto_register_shashes(algs, ARRAY_SIZE(algs)); + + if (res < 0) + return res; + + if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && cpu_has_neon()) { + res = crypto_register_shashes(sha256_neon_algs, + ARRAY_SIZE(sha256_neon_algs)); + + if (res < 0) + crypto_unregister_shashes(algs, ARRAY_SIZE(algs)); + } + + return res; +} + +static void __exit sha256_mod_fini(void) +{ + crypto_unregister_shashes(algs, ARRAY_SIZE(algs)); + + if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && cpu_has_neon()) + crypto_unregister_shashes(sha256_neon_algs, + ARRAY_SIZE(sha256_neon_algs)); +} + +module_init(sha256_mod_init); +module_exit(sha256_mod_fini); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SHA256 Secure Hash Algorithm (ARM), including NEON"); + +MODULE_ALIAS_CRYPTO("sha256"); diff --git a/arch/arm/crypto/sha256_glue.h b/arch/arm/crypto/sha256_glue.h new file mode 100644 index 0000000000000000000000000000000000000000..7cf0bf786ada13d49497eeb0af01cbc7bf75b78d --- /dev/null +++ b/arch/arm/crypto/sha256_glue.h @@ -0,0 +1,14 @@ +#ifndef _CRYPTO_SHA256_GLUE_H +#define _CRYPTO_SHA256_GLUE_H + +#include + +extern struct shash_alg sha256_neon_algs[2]; + +int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data, + unsigned int len); + +int crypto_sha256_arm_finup(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *hash); + +#endif /* _CRYPTO_SHA256_GLUE_H */ diff --git a/arch/arm/crypto/sha256_neon_glue.c b/arch/arm/crypto/sha256_neon_glue.c new file mode 100644 index 0000000000000000000000000000000000000000..39ccd658817e28009f317d0544d89ea0f043bae8 --- /dev/null +++ b/arch/arm/crypto/sha256_neon_glue.c @@ -0,0 +1,101 @@ +/* + * Glue code for the SHA256 Secure Hash Algorithm assembly implementation + * using NEON instructions. + * + * Copyright 2015 Google Inc. + * + * This file is based on sha512_neon_glue.c: + * Copyright 2014 Jussi Kivilinna + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sha256_glue.h" + +asmlinkage void sha256_block_data_order_neon(u32 *digest, const void *data, + unsigned int num_blks); + +static int sha256_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + struct sha256_state *sctx = shash_desc_ctx(desc); + + if (!may_use_simd() || + (sctx->count % SHA256_BLOCK_SIZE) + len < SHA256_BLOCK_SIZE) + return crypto_sha256_arm_update(desc, data, len); + + kernel_neon_begin(); + sha256_base_do_update(desc, data, len, + (sha256_block_fn *)sha256_block_data_order_neon); + kernel_neon_end(); + + return 0; +} + +static int sha256_finup(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out) +{ + if (!may_use_simd()) + return crypto_sha256_arm_finup(desc, data, len, out); + + kernel_neon_begin(); + if (len) + sha256_base_do_update(desc, data, len, + (sha256_block_fn *)sha256_block_data_order_neon); + sha256_base_do_finalize(desc, + (sha256_block_fn *)sha256_block_data_order_neon); + kernel_neon_end(); + + return sha256_base_finish(desc, out); +} + +static int sha256_final(struct shash_desc *desc, u8 *out) +{ + return sha256_finup(desc, NULL, 0, out); +} + +struct shash_alg sha256_neon_algs[] = { { + .digestsize = SHA256_DIGEST_SIZE, + .init = sha256_base_init, + .update = sha256_update, + .final = sha256_final, + .finup = sha256_finup, + .descsize = sizeof(struct sha256_state), + .base = { + .cra_name = "sha256", + .cra_driver_name = "sha256-neon", + .cra_priority = 250, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA256_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +}, { + .digestsize = SHA224_DIGEST_SIZE, + .init = sha224_base_init, + .update = sha256_update, + .final = sha256_final, + .finup = sha256_finup, + .descsize = sizeof(struct sha256_state), + .base = { + .cra_name = "sha224", + .cra_driver_name = "sha224-neon", + .cra_priority = 250, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA224_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +} }; diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index fe74c0d1e485f01588ec21a927a852a0b0ca156e..3c4596d0ce6cbd7a28ea0fbd521645b0092bab33 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -1,6 +1,5 @@ -generic-y += auxvec.h generic-y += bitsperlong.h generic-y += cputime.h generic-y += current.h @@ -22,6 +21,7 @@ generic-y += preempt.h generic-y += resource.h generic-y += rwsem.h generic-y += scatterlist.h +generic-y += seccomp.h generic-y += sections.h generic-y += segment.h generic-y += sembuf.h diff --git a/arch/arm/include/asm/arm-cci.h b/arch/arm/include/asm/arm-cci.h new file mode 100644 index 0000000000000000000000000000000000000000..fe77f7ab7e6bbb91f2683cc46b169ae76eabc8ca --- /dev/null +++ b/arch/arm/include/asm/arm-cci.h @@ -0,0 +1,42 @@ +/* + * arch/arm/include/asm/arm-cci.h + * + * Copyright (C) 2015 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef __ASM_ARM_CCI_H +#define __ASM_ARM_CCI_H + +#ifdef CONFIG_MCPM +#include + +/* + * We don't have a reliable way of detecting whether, + * if we have access to secure-only registers, unless + * mcpm is registered. + */ +static inline bool platform_has_secure_cci_access(void) +{ + return mcpm_is_available(); +} + +#else +static inline bool platform_has_secure_cci_access(void) +{ + return false; +} +#endif + +#endif diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index f67fd3afebdfd3fd46418d80d12dd31ea628936c..186270b3e1944351d8b168d25a379477748f9920 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -237,6 +237,9 @@ .pushsection ".alt.smp.init", "a" ;\ .long 9998b ;\ 9997: instr ;\ + .if . - 9997b == 2 ;\ + nop ;\ + .endif ;\ .if . - 9997b != 4 ;\ .error "ALT_UP() content must assemble to exactly 4 bytes";\ .endif ;\ diff --git a/arch/arm/include/asm/auxvec.h b/arch/arm/include/asm/auxvec.h new file mode 100644 index 0000000000000000000000000000000000000000..fbd388c4629905009731120ec88120ad654f187f --- /dev/null +++ b/arch/arm/include/asm/auxvec.h @@ -0,0 +1 @@ +#include diff --git a/arch/arm/include/asm/cpuidle.h b/arch/arm/include/asm/cpuidle.h index af319ac4960c707d7e16a5635d2bce83c98761c4..0f842492490280b9d0b50fd1b25935a51b5a4c9d 100644 --- a/arch/arm/include/asm/cpuidle.h +++ b/arch/arm/include/asm/cpuidle.h @@ -1,6 +1,8 @@ #ifndef __ASM_ARM_CPUIDLE_H #define __ASM_ARM_CPUIDLE_H +#include + #ifdef CONFIG_CPU_IDLE extern int arm_cpuidle_simple_enter(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); @@ -25,4 +27,25 @@ static inline int arm_cpuidle_simple_enter(struct cpuidle_device *dev, */ #define ARM_CPUIDLE_WFI_STATE ARM_CPUIDLE_WFI_STATE_PWR(UINT_MAX) +struct device_node; + +struct cpuidle_ops { + int (*suspend)(int cpu, unsigned long arg); + int (*init)(struct device_node *, int cpu); +}; + +struct of_cpuidle_method { + const char *method; + struct cpuidle_ops *ops; +}; + +#define CPUIDLE_METHOD_OF_DECLARE(name, _method, _ops) \ + static const struct of_cpuidle_method __cpuidle_method_of_table_##name \ + __used __section(__cpuidle_method_of_table) \ + = { .method = _method, .ops = _ops } + +extern int arm_cpuidle_suspend(int index); + +extern int arm_cpuidle_init(int cpu); + #endif diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 819777d0e91f92cb91ff8c1933c480cb1bb80b91..85e374f873ac7b182709ef7552002188d9d3e1e3 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -253,4 +253,20 @@ static inline int cpu_is_pj4(void) #else #define cpu_is_pj4() 0 #endif + +static inline int __attribute_const__ cpuid_feature_extract_field(u32 features, + int field) +{ + int feature = (features >> field) & 15; + + /* feature registers are signed values */ + if (feature > 8) + feature -= 16; + + return feature; +} + +#define cpuid_feature_extract(reg, field) \ + cpuid_feature_extract_field(read_cpuid_ext(reg), field) + #endif diff --git a/arch/arm/include/asm/dma-iommu.h b/arch/arm/include/asm/dma-iommu.h index 8e3fcb924db6f13fcf0c5c08f6c8bb6cdc28a36b..2ef282f96651fbac9daa8b614c697c8020d1715f 100644 --- a/arch/arm/include/asm/dma-iommu.h +++ b/arch/arm/include/asm/dma-iommu.h @@ -25,7 +25,7 @@ struct dma_iommu_mapping { }; struct dma_iommu_mapping * -arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size); +arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size); void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping); diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index afb9cafd378618fef0d39a7bcae64e9950afdb1c..d2315ffd8f12658b5e45bfa5831538fc4e4ad1e4 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -1,7 +1,9 @@ #ifndef __ASMARM_ELF_H #define __ASMARM_ELF_H +#include #include +#include /* * ELF register definitions.. @@ -115,7 +117,7 @@ int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs); the loader. We need to make sure that it is out of the way of the program that it will "exec", and that there is sufficient room for the brk. */ -#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) +#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2) /* When the program starts, a1 contains a pointer to a function to be registered with atexit, as per the SVR4 ABI. A value of 0 means we @@ -125,11 +127,14 @@ int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs); extern void elf_set_personality(const struct elf32_hdr *); #define SET_PERSONALITY(ex) elf_set_personality(&(ex)) -struct mm_struct; -extern unsigned long arch_randomize_brk(struct mm_struct *mm); -#define arch_randomize_brk arch_randomize_brk - #ifdef CONFIG_MMU +#ifdef CONFIG_VDSO +#define ARCH_DLINFO \ +do { \ + NEW_AUX_ENT(AT_SYSINFO_EHDR, \ + (elf_addr_t)current->mm->context.vdso); \ +} while (0) +#endif #define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1 struct linux_binprm; int arch_setup_additional_pages(struct linux_binprm *, int); diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 53e69dae796f32e495ab262953d4b52cce0cc303..4e78065a16aa3c6a3dae5db147f36fda00dcf18a 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -13,7 +13,7 @@ " .align 3\n" \ " .long 1b, 4f, 2b, 4f\n" \ " .popsection\n" \ - " .pushsection .fixup,\"ax\"\n" \ + " .pushsection .text.fixup,\"ax\"\n" \ " .align 2\n" \ "4: mov %0, " err_reg "\n" \ " b 3b\n" \ diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index 4cf48c3aca13e9afe7b852660afa4d5945994a93..405aa18833073b88b52103363b54d534d9c69263 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h @@ -269,6 +269,16 @@ static inline void __kvm_flush_dcache_pud(pud_t pud) void kvm_set_way_flush(struct kvm_vcpu *vcpu); void kvm_toggle_cache(struct kvm_vcpu *vcpu, bool was_enabled); +static inline bool __kvm_cpu_uses_extended_idmap(void) +{ + return false; +} + +static inline void __kvm_extend_hypmap(pgd_t *boot_hyp_pgd, + pgd_t *hyp_pgd, + pgd_t *merged_hyp_pgd, + unsigned long hyp_idmap_start) { } + #endif /* !__ASSEMBLY__ */ #endif /* __ARM_KVM_MMU_H__ */ diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h index 3446f6a1d9fa6c982dbfc511aa34da8c8803da9e..50b378f59e086c45331a594060b1bafc3d627d48 100644 --- a/arch/arm/include/asm/mcpm.h +++ b/arch/arm/include/asm/mcpm.h @@ -171,12 +171,73 @@ void mcpm_cpu_suspend(u64 expected_residency); int mcpm_cpu_powered_up(void); /* - * Platform specific methods used in the implementation of the above API. + * Platform specific callbacks used in the implementation of the above API. + * + * cpu_powerup: + * Make given CPU runable. Called with MCPM lock held and IRQs disabled. + * The given cluster is assumed to be set up (cluster_powerup would have + * been called beforehand). Must return 0 for success or negative error code. + * + * cluster_powerup: + * Set up power for given cluster. Called with MCPM lock held and IRQs + * disabled. Called before first cpu_powerup when cluster is down. Must + * return 0 for success or negative error code. + * + * cpu_suspend_prepare: + * Special suspend configuration. Called on target CPU with MCPM lock held + * and IRQs disabled. This callback is optional. If provided, it is called + * before cpu_powerdown_prepare. + * + * cpu_powerdown_prepare: + * Configure given CPU for power down. Called on target CPU with MCPM lock + * held and IRQs disabled. Power down must be effective only at the next WFI instruction. + * + * cluster_powerdown_prepare: + * Configure given cluster for power down. Called on one CPU from target + * cluster with MCPM lock held and IRQs disabled. A cpu_powerdown_prepare + * for each CPU in the cluster has happened when this occurs. + * + * cpu_cache_disable: + * Clean and disable CPU level cache for the calling CPU. Called on with IRQs + * disabled only. The CPU is no longer cache coherent with the rest of the + * system when this returns. + * + * cluster_cache_disable: + * Clean and disable the cluster wide cache as well as the CPU level cache + * for the calling CPU. No call to cpu_cache_disable will happen for this + * CPU. Called with IRQs disabled and only when all the other CPUs are done + * with their own cpu_cache_disable. The cluster is no longer cache coherent + * with the rest of the system when this returns. + * + * cpu_is_up: + * Called on given CPU after it has been powered up or resumed. The MCPM lock + * is held and IRQs disabled. This callback is optional. + * + * cluster_is_up: + * Called by the first CPU to be powered up or resumed in given cluster. + * The MCPM lock is held and IRQs disabled. This callback is optional. If + * provided, it is called before cpu_is_up for that CPU. + * + * wait_for_powerdown: + * Wait until given CPU is powered down. This is called in sleeping context. + * Some reasonable timeout must be considered. Must return 0 for success or + * negative error code. */ struct mcpm_platform_ops { + int (*cpu_powerup)(unsigned int cpu, unsigned int cluster); + int (*cluster_powerup)(unsigned int cluster); + void (*cpu_suspend_prepare)(unsigned int cpu, unsigned int cluster); + void (*cpu_powerdown_prepare)(unsigned int cpu, unsigned int cluster); + void (*cluster_powerdown_prepare)(unsigned int cluster); + void (*cpu_cache_disable)(void); + void (*cluster_cache_disable)(void); + void (*cpu_is_up)(unsigned int cpu, unsigned int cluster); + void (*cluster_is_up)(unsigned int cluster); + int (*wait_for_powerdown)(unsigned int cpu, unsigned int cluster); + + /* deprecated callbacks */ int (*power_up)(unsigned int cpu, unsigned int cluster); void (*power_down)(void); - int (*wait_for_powerdown)(unsigned int cpu, unsigned int cluster); void (*suspend)(u64); void (*powered_up)(void); }; diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h index 64fd15159b7de710b81a47c0aa9d6bab3af1d691..a5b47421059dc34153f7450a1cc7d2baf21200b5 100644 --- a/arch/arm/include/asm/mmu.h +++ b/arch/arm/include/asm/mmu.h @@ -11,6 +11,9 @@ typedef struct { #endif unsigned int vmalloc_seq; unsigned long sigpage; +#ifdef CONFIG_VDSO + unsigned long vdso; +#endif } mm_context_t; #ifdef CONFIG_CPU_HAS_ASID diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index b1596bd59129049ab3dfd46a95aff4e75531fe90..675e4ab79f68948786733ab2652239e0fe98d049 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -92,6 +92,7 @@ struct pmu_hw_events { struct arm_pmu { struct pmu pmu; cpumask_t active_irqs; + int *irq_affinity; char *name; irqreturn_t (*handle_irq)(int irq_num, void *dev); void (*enable)(struct perf_event *event); diff --git a/arch/arm/include/asm/seccomp.h b/arch/arm/include/asm/seccomp.h deleted file mode 100644 index 52b156b341f5193c63b353a7ed740b25b9b0829b..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/seccomp.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _ASM_ARM_SECCOMP_H -#define _ASM_ARM_SECCOMP_H - -#include - -#define __NR_seccomp_read __NR_read -#define __NR_seccomp_write __NR_write -#define __NR_seccomp_exit __NR_exit -#define __NR_seccomp_sigreturn __NR_rt_sigreturn - -#endif /* _ASM_ARM_SECCOMP_H */ diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h index 0ad7d490ee6f2657b1504359d362ad8d886bee91..993e5224d8f7eeeb09f4c2a5358a97073c67c3a6 100644 --- a/arch/arm/include/asm/smp_plat.h +++ b/arch/arm/include/asm/smp_plat.h @@ -104,6 +104,7 @@ static inline u32 mpidr_hash_size(void) return 1 << mpidr_hash.bits; } +extern int platform_can_secondary_boot(void); extern int platform_can_cpu_hotplug(void); #endif diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 72812a1f3d1cc9df83c8b7354655adf345069dad..bd32eded3e5061b49048e3110902b7edc63e3638 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -23,7 +23,6 @@ #ifndef __ASSEMBLY__ struct task_struct; -struct exec_domain; #include #include @@ -53,7 +52,6 @@ struct thread_info { int preempt_count; /* 0 => preemptable, <0 => bug */ mm_segment_t addr_limit; /* address limit */ struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ __u32 cpu; /* cpu */ __u32 cpu_domain; /* cpu domain */ struct cpu_context_save cpu_context; /* cpu context */ @@ -73,7 +71,6 @@ struct thread_info { #define INIT_THREAD_INFO(tsk) \ { \ .task = &tsk, \ - .exec_domain = &default_exec_domain, \ .flags = 0, \ .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index ce0786efd26c3485d28baa6b7857e35350c1336d..74b17d09ef7aa54cb98d22ccf5f068b4c39971be 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -315,7 +315,7 @@ do { \ __asm__ __volatile__( \ "1: " TUSER(ldrb) " %1,[%2],#0\n" \ "2:\n" \ - " .pushsection .fixup,\"ax\"\n" \ + " .pushsection .text.fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, %3\n" \ " mov %1, #0\n" \ @@ -351,7 +351,7 @@ do { \ __asm__ __volatile__( \ "1: " TUSER(ldr) " %1,[%2],#0\n" \ "2:\n" \ - " .pushsection .fixup,\"ax\"\n" \ + " .pushsection .text.fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, %3\n" \ " mov %1, #0\n" \ @@ -397,7 +397,7 @@ do { \ __asm__ __volatile__( \ "1: " TUSER(strb) " %1,[%2],#0\n" \ "2:\n" \ - " .pushsection .fixup,\"ax\"\n" \ + " .pushsection .text.fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, %3\n" \ " b 2b\n" \ @@ -430,7 +430,7 @@ do { \ __asm__ __volatile__( \ "1: " TUSER(str) " %1,[%2],#0\n" \ "2:\n" \ - " .pushsection .fixup,\"ax\"\n" \ + " .pushsection .text.fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, %3\n" \ " b 2b\n" \ @@ -458,7 +458,7 @@ do { \ THUMB( "1: " TUSER(str) " " __reg_oper1 ", [%1]\n" ) \ THUMB( "2: " TUSER(str) " " __reg_oper0 ", [%1, #4]\n" ) \ "3:\n" \ - " .pushsection .fixup,\"ax\"\n" \ + " .pushsection .text.fixup,\"ax\"\n" \ " .align 2\n" \ "4: mov %0, %3\n" \ " b 3b\n" \ diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h index b88beaba6b4a5cf9c0ccded73723c4ea41539167..200f9a7cd623e613acd89a3d0fbb219b48232604 100644 --- a/arch/arm/include/asm/unified.h +++ b/arch/arm/include/asm/unified.h @@ -24,6 +24,14 @@ .syntax unified #endif +#ifdef CONFIG_CPU_V7M +#define AR_CLASS(x...) +#define M_CLASS(x...) x +#else +#define AR_CLASS(x...) x +#define M_CLASS(x...) +#endif + #ifdef CONFIG_THUMB2_KERNEL #if __GNUC__ < 4 diff --git a/arch/arm/include/asm/vdso.h b/arch/arm/include/asm/vdso.h new file mode 100644 index 0000000000000000000000000000000000000000..d0295f1dd1a38864ee56fb05efefa441f4e00000 --- /dev/null +++ b/arch/arm/include/asm/vdso.h @@ -0,0 +1,32 @@ +#ifndef __ASM_VDSO_H +#define __ASM_VDSO_H + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ + +struct mm_struct; + +#ifdef CONFIG_VDSO + +void arm_install_vdso(struct mm_struct *mm, unsigned long addr); + +extern char vdso_start, vdso_end; + +extern unsigned int vdso_total_pages; + +#else /* CONFIG_VDSO */ + +static inline void arm_install_vdso(struct mm_struct *mm, unsigned long addr) +{ +} + +#define vdso_total_pages 0 + +#endif /* CONFIG_VDSO */ + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* __ASM_VDSO_H */ diff --git a/arch/arm/include/asm/vdso_datapage.h b/arch/arm/include/asm/vdso_datapage.h new file mode 100644 index 0000000000000000000000000000000000000000..9be259442fca011464a1dc001a2f56b728d815ff --- /dev/null +++ b/arch/arm/include/asm/vdso_datapage.h @@ -0,0 +1,60 @@ +/* + * Adapted from arm64 version. + * + * Copyright (C) 2012 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#ifndef __ASM_VDSO_DATAPAGE_H +#define __ASM_VDSO_DATAPAGE_H + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ + +#include + +/* Try to be cache-friendly on systems that don't implement the + * generic timer: fit the unconditionally updated fields in the first + * 32 bytes. + */ +struct vdso_data { + u32 seq_count; /* sequence count - odd during updates */ + u16 tk_is_cntvct; /* fall back to syscall if false */ + u16 cs_shift; /* clocksource shift */ + u32 xtime_coarse_sec; /* coarse time */ + u32 xtime_coarse_nsec; + + u32 wtm_clock_sec; /* wall to monotonic offset */ + u32 wtm_clock_nsec; + u32 xtime_clock_sec; /* CLOCK_REALTIME - seconds */ + u32 cs_mult; /* clocksource multiplier */ + + u64 cs_cycle_last; /* last cycle value */ + u64 cs_mask; /* clocksource mask */ + + u64 xtime_clock_snsec; /* CLOCK_REALTIME sub-ns base */ + u32 tz_minuteswest; /* timezone info for gettimeofday(2) */ + u32 tz_dsttime; +}; + +union vdso_data_store { + struct vdso_data data; + u8 page[PAGE_SIZE]; +}; + +#endif /* !__ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* __ASM_VDSO_DATAPAGE_H */ diff --git a/arch/arm/include/asm/word-at-a-time.h b/arch/arm/include/asm/word-at-a-time.h index a6d0a29861e7cef407a5514c5a2d8687726d4a30..5831dce4b51c33e9b95bd8d2300467c557143eb6 100644 --- a/arch/arm/include/asm/word-at-a-time.h +++ b/arch/arm/include/asm/word-at-a-time.h @@ -71,7 +71,7 @@ static inline unsigned long load_unaligned_zeropad(const void *addr) asm( "1: ldr %0, [%2]\n" "2:\n" - " .pushsection .fixup,\"ax\"\n" + " .pushsection .text.fixup,\"ax\"\n" " .align 2\n" "3: and %1, %2, #0x3\n" " bic %2, %2, #0x3\n" diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h index 2f7e6ff67d51556218dbc4e9858442da6601df81..0b579b2f4e0e6490bb396c301cd2adf433e3b1ad 100644 --- a/arch/arm/include/asm/xen/page.h +++ b/arch/arm/include/asm/xen/page.h @@ -110,5 +110,6 @@ static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn) bool xen_arch_need_swiotlb(struct device *dev, unsigned long pfn, unsigned long mfn); +unsigned long xen_get_swiotlb_free_pages(unsigned int order); #endif /* _ASM_ARM_XEN_PAGE_H */ diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S index e55a9426b49676f838663c2b6164266da7fef5e9..b03024fa671f41cebc5a0bf728b1a30fe1ad571d 100644 --- a/arch/arm/include/debug/msm.S +++ b/arch/arm/include/debug/msm.S @@ -16,24 +16,17 @@ */ .macro addruart, rp, rv, tmp -#ifdef CONFIG_DEBUG_UART_PHYS ldr \rp, =CONFIG_DEBUG_UART_PHYS ldr \rv, =CONFIG_DEBUG_UART_VIRT -#endif .endm .macro senduart, rd, rx ARM_BE8(rev \rd, \rd ) -#ifdef CONFIG_DEBUG_QCOM_UARTDM @ Write the 1 character to UARTDM_TF str \rd, [\rx, #0x70] -#else - str \rd, [\rx, #0x0C] -#endif .endm .macro waituart, rd, rx -#ifdef CONFIG_DEBUG_QCOM_UARTDM @ check for TX_EMT in UARTDM_SR ldr \rd, [\rx, #0x08] ARM_BE8(rev \rd, \rd ) @@ -55,13 +48,6 @@ ARM_BE8(rev \rd, \rd ) str \rd, [\rx, #0x40] @ UARTDM reg. Read to induce delay ldr \rd, [\rx, #0x08] -#else - @ wait for TX_READY -1001: ldr \rd, [\rx, #0x08] -ARM_BE8(rev \rd, \rd ) - tst \rd, #0x04 - beq 1001b -#endif .endm .macro busyuart, rd, rx diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild index 70a1c9da30ca39d4d4d79e8e73c3b8aec0d607e3..a1c05f93d920dd245287d39f7bd8721cb78fc732 100644 --- a/arch/arm/include/uapi/asm/Kbuild +++ b/arch/arm/include/uapi/asm/Kbuild @@ -1,6 +1,7 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm +header-y += auxvec.h header-y += byteorder.h header-y += fcntl.h header-y += hwcap.h diff --git a/arch/arm/include/uapi/asm/auxvec.h b/arch/arm/include/uapi/asm/auxvec.h new file mode 100644 index 0000000000000000000000000000000000000000..cb02a767a50068d3ff665da106a604c11d32787f --- /dev/null +++ b/arch/arm/include/uapi/asm/auxvec.h @@ -0,0 +1,7 @@ +#ifndef __ASM_AUXVEC_H +#define __ASM_AUXVEC_H + +/* VDSO location */ +#define AT_SYSINFO_EHDR 33 + +#endif diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h index 2499867dd0d86d79477e85ac0933228b9bbcf6a2..df3f60cb1168aff33ed9c2df530439ccfedb1a72 100644 --- a/arch/arm/include/uapi/asm/kvm.h +++ b/arch/arm/include/uapi/asm/kvm.h @@ -195,8 +195,14 @@ struct kvm_arch_memory_slot { #define KVM_ARM_IRQ_CPU_IRQ 0 #define KVM_ARM_IRQ_CPU_FIQ 1 -/* Highest supported SPI, from VGIC_NR_IRQS */ +/* + * This used to hold the highest supported SPI, but it is now obsolete + * and only here to provide source code level compatibility with older + * userland. The highest SPI number can be set via KVM_DEV_ARM_VGIC_GRP_NR_IRQS. + */ +#ifndef __KERNEL__ #define KVM_ARM_IRQ_GIC_MAX 127 +#endif /* One single KVM irqchip, ie. the VGIC */ #define KVM_NR_IRQCHIPS 1 diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 902397dd100070165a4ed62950ad24bbf3d5594b..752725dcbf42914032d0bee4f9c9f48e65fde7c5 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -16,7 +16,7 @@ CFLAGS_REMOVE_return_address.o = -pg # Object file lists. obj-y := elf.o entry-common.o irq.o opcodes.o \ - process.o ptrace.o return_address.o \ + process.o ptrace.o reboot.o return_address.o \ setup.o signal.o sigreturn_codes.o \ stacktrace.o sys_arm.o time.o traps.o @@ -34,7 +34,6 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ISA_DMA_API) += dma.o obj-$(CONFIG_FIQ) += fiq.o fiqasm.o obj-$(CONFIG_MODULES) += armksyms.o module.o -obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o obj-$(CONFIG_ARM_CPU_SUSPEND) += sleep.o suspend.o @@ -75,6 +74,7 @@ obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o perf_event_cpu.o CFLAGS_pj4-cp0.o := -marm AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o +obj-$(CONFIG_VDSO) += vdso.o ifneq ($(CONFIG_ARCH_EBSA110),y) obj-y += io.o @@ -86,7 +86,7 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_ARM_VIRT_EXT) += hyp-stub.o ifeq ($(CONFIG_ARM_PSCI),y) -obj-y += psci.o +obj-y += psci.o psci-call.o obj-$(CONFIG_SMP) += psci_smp.o endif diff --git a/arch/arm/kernel/arthur.c b/arch/arm/kernel/arthur.c deleted file mode 100644 index 321c5291d05f0aea77f326fd05bbb2cd2a5a3b2a..0000000000000000000000000000000000000000 --- a/arch/arm/kernel/arthur.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * linux/arch/arm/kernel/arthur.c - * - * Copyright (C) 1998, 1999, 2000, 2001 Philip Blundell - * - * Arthur personality - */ - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include - -#include - -/* Arthur doesn't have many signals, and a lot of those that it does - have don't map easily to any Linux equivalent. Never mind. */ - -#define ARTHUR_SIGABRT 1 -#define ARTHUR_SIGFPE 2 -#define ARTHUR_SIGILL 3 -#define ARTHUR_SIGINT 4 -#define ARTHUR_SIGSEGV 5 -#define ARTHUR_SIGTERM 6 -#define ARTHUR_SIGSTAK 7 -#define ARTHUR_SIGUSR1 8 -#define ARTHUR_SIGUSR2 9 -#define ARTHUR_SIGOSERROR 10 - -static unsigned long arthur_to_linux_signals[32] = { - 0, 1, 2, 3, 4, 5, 6, 7, - 8, 9, 10, 11, 12, 13, 14, 15, - 16, 17, 18, 19, 20, 21, 22, 23, - 24, 25, 26, 27, 28, 29, 30, 31 -}; - -static unsigned long linux_to_arthur_signals[32] = { - 0, -1, ARTHUR_SIGINT, -1, - ARTHUR_SIGILL, 5, ARTHUR_SIGABRT, 7, - ARTHUR_SIGFPE, 9, ARTHUR_SIGUSR1, ARTHUR_SIGSEGV, - ARTHUR_SIGUSR2, 13, 14, ARTHUR_SIGTERM, - 16, 17, 18, 19, - 20, 21, 22, 23, - 24, 25, 26, 27, - 28, 29, 30, 31 -}; - -static void arthur_lcall7(int nr, struct pt_regs *regs) -{ - struct siginfo info; - info.si_signo = SIGSWI; - info.si_errno = nr; - /* Bounce it to the emulator */ - send_sig_info(SIGSWI, &info, current); -} - -static struct exec_domain arthur_exec_domain = { - .name = "Arthur", - .handler = arthur_lcall7, - .pers_low = PER_RISCOS, - .pers_high = PER_RISCOS, - .signal_map = arthur_to_linux_signals, - .signal_invmap = linux_to_arthur_signals, - .module = THIS_MODULE, -}; - -/* - * We could do with some locking to stop Arthur being removed while - * processes are using it. - */ - -static int __init arthur_init(void) -{ - return register_exec_domain(&arthur_exec_domain); -} - -static void __exit arthur_exit(void) -{ - unregister_exec_domain(&arthur_exec_domain); -} - -module_init(arthur_init); -module_exit(arthur_exit); - -MODULE_LICENSE("GPL"); diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 488eaac56028f59ed08fc4030de25dd7d6a59ccb..871b8267d211af0e5eaf9d5fb9f8329ae33696e1 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -66,7 +67,6 @@ int main(void) DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count)); DEFINE(TI_ADDR_LIMIT, offsetof(struct thread_info, addr_limit)); DEFINE(TI_TASK, offsetof(struct thread_info, task)); - DEFINE(TI_EXEC_DOMAIN, offsetof(struct thread_info, exec_domain)); DEFINE(TI_CPU, offsetof(struct thread_info, cpu)); DEFINE(TI_CPU_DOMAIN, offsetof(struct thread_info, cpu_domain)); DEFINE(TI_CPU_SAVE, offsetof(struct thread_info, cpu_context)); @@ -205,6 +205,10 @@ int main(void) DEFINE(KVM_TIMER_ENABLED, offsetof(struct kvm, arch.timer.enabled)); DEFINE(KVM_VGIC_VCTRL, offsetof(struct kvm, arch.vgic.vctrl_base)); DEFINE(KVM_VTTBR, offsetof(struct kvm, arch.vttbr)); +#endif + BLANK(); +#ifdef CONFIG_VDSO + DEFINE(VDSO_DATA_SIZE, sizeof(union vdso_data_store)); #endif return 0; } diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index ab19b7c03423690adac07fd99e525a5f4ac3f359..fcbbbb1b9e9578b64371785385b6074e256ff26d 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -618,21 +618,15 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine) { - struct pci_sys_data *root = dev->sysdata; - unsigned long phys; - - if (mmap_state == pci_mmap_io) { + if (mmap_state == pci_mmap_io) return -EINVAL; - } else { - phys = vma->vm_pgoff + (root->mem_offset >> PAGE_SHIFT); - } /* * Mark this as IO */ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); - if (remap_pfn_range(vma, vma->vm_start, phys, + if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, vma->vm_end - vma->vm_start, vma->vm_page_prot)) return -EAGAIN; diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c index 89545f6c840345ca8015231956df258c02fb3596..318da33465f413f8c207eb2dd9b3766e53ab5ad3 100644 --- a/arch/arm/kernel/cpuidle.c +++ b/arch/arm/kernel/cpuidle.c @@ -10,8 +10,28 @@ */ #include -#include +#include +#include +#include +extern struct of_cpuidle_method __cpuidle_method_of_table[]; + +static const struct of_cpuidle_method __cpuidle_method_of_table_sentinel + __used __section(__cpuidle_method_of_table_end); + +static struct cpuidle_ops cpuidle_ops[NR_CPUS]; + +/** + * arm_cpuidle_simple_enter() - a wrapper to cpu_do_idle() + * @dev: not used + * @drv: not used + * @index: not used + * + * A trivial wrapper to allow the cpu_do_idle function to be assigned as a + * cpuidle callback by matching the function signature. + * + * Returns the index passed as parameter + */ int arm_cpuidle_simple_enter(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { @@ -19,3 +39,114 @@ int arm_cpuidle_simple_enter(struct cpuidle_device *dev, return index; } + +/** + * arm_cpuidle_suspend() - function to enter low power idle states + * @index: an integer used as an identifier for the low level PM callbacks + * + * This function calls the underlying arch specific low level PM code as + * registered at the init time. + * + * Returns -EOPNOTSUPP if no suspend callback is defined, the result of the + * callback otherwise. + */ +int arm_cpuidle_suspend(int index) +{ + int ret = -EOPNOTSUPP; + int cpu = smp_processor_id(); + + if (cpuidle_ops[cpu].suspend) + ret = cpuidle_ops[cpu].suspend(cpu, index); + + return ret; +} + +/** + * arm_cpuidle_get_ops() - find a registered cpuidle_ops by name + * @method: the method name + * + * Search in the __cpuidle_method_of_table array the cpuidle ops matching the + * method name. + * + * Returns a struct cpuidle_ops pointer, NULL if not found. + */ +static struct cpuidle_ops *__init arm_cpuidle_get_ops(const char *method) +{ + struct of_cpuidle_method *m = __cpuidle_method_of_table; + + for (; m->method; m++) + if (!strcmp(m->method, method)) + return m->ops; + + return NULL; +} + +/** + * arm_cpuidle_read_ops() - Initialize the cpuidle ops with the device tree + * @dn: a pointer to a struct device node corresponding to a cpu node + * @cpu: the cpu identifier + * + * Get the method name defined in the 'enable-method' property, retrieve the + * associated cpuidle_ops and do a struct copy. This copy is needed because all + * cpuidle_ops are tagged __initdata and will be unloaded after the init + * process. + * + * Return 0 on sucess, -ENOENT if no 'enable-method' is defined, -EOPNOTSUPP if + * no cpuidle_ops is registered for the 'enable-method'. + */ +static int __init arm_cpuidle_read_ops(struct device_node *dn, int cpu) +{ + const char *enable_method; + struct cpuidle_ops *ops; + + enable_method = of_get_property(dn, "enable-method", NULL); + if (!enable_method) + return -ENOENT; + + ops = arm_cpuidle_get_ops(enable_method); + if (!ops) { + pr_warn("%s: unsupported enable-method property: %s\n", + dn->full_name, enable_method); + return -EOPNOTSUPP; + } + + cpuidle_ops[cpu] = *ops; /* structure copy */ + + pr_notice("cpuidle: enable-method property '%s'" + " found operations\n", enable_method); + + return 0; +} + +/** + * arm_cpuidle_init() - Initialize cpuidle_ops for a specific cpu + * @cpu: the cpu to be initialized + * + * Initialize the cpuidle ops with the device for the cpu and then call + * the cpu's idle initialization callback. This may fail if the underlying HW + * is not operational. + * + * Returns: + * 0 on success, + * -ENODEV if it fails to find the cpu node in the device tree, + * -EOPNOTSUPP if it does not find a registered cpuidle_ops for this cpu, + * -ENOENT if it fails to find an 'enable-method' property, + * -ENXIO if the HW reports a failure or a misconfiguration, + * -ENOMEM if the HW report an memory allocation failure + */ +int __init arm_cpuidle_init(int cpu) +{ + struct device_node *cpu_node = of_cpu_device_node_get(cpu); + int ret; + + if (!cpu_node) + return -ENODEV; + + ret = arm_cpuidle_read_ops(cpu_node, cpu); + if (!ret && cpuidle_ops[cpu].init) + ret = cpuidle_ops[cpu].init(cpu_node, cpu); + + of_node_put(cpu_node); + + return ret; +} diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 672b21942fff77581d13959039b518a36a1e1eef..570306c494068f2ac8f841eb3344b4f981f7a3bb 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -545,7 +545,7 @@ ENDPROC(__und_usr) /* * The out of line fixup for the ldrt instructions above. */ - .pushsection .fixup, "ax" + .pushsection .text.fixup, "ax" .align 2 4: str r4, [sp, #S_PC] @ retry current instruction ret r9 diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index cc176b67c13487b080bf7d1dc430314496a8b9b1..aebfbf79a1a3f5f2a98981e5abca8657634cb7c6 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -80,9 +80,9 @@ ENTRY(stext) ldr r13, =__mmap_switched @ address to jump to after @ initialising sctlr adr lr, BSYM(1f) @ return (PIC) address - ARM( add pc, r10, #PROCINFO_INITFUNC ) - THUMB( add r12, r10, #PROCINFO_INITFUNC ) - THUMB( ret r12 ) + ldr r12, [r10, #PROCINFO_INITFUNC] + add r12, r12, r10 + ret r12 1: b __after_proc_init ENDPROC(stext) @@ -117,9 +117,9 @@ ENTRY(secondary_startup) adr lr, BSYM(__after_proc_init) @ return address mov r13, r12 @ __secondary_switched address - ARM( add pc, r10, #PROCINFO_INITFUNC ) - THUMB( add r12, r10, #PROCINFO_INITFUNC ) - THUMB( ret r12 ) + ldr r12, [r10, #PROCINFO_INITFUNC] + add r12, r12, r10 + ret r12 ENDPROC(secondary_startup) ENTRY(__secondary_switched) diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 01963273c07a7b187be24bb2a4974b9fc826ebcf..3637973a9708bc4f9e8f457b7c04307ca6e2212b 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -138,9 +138,9 @@ ENTRY(stext) @ mmu has been enabled adr lr, BSYM(1f) @ return (PIC) address mov r8, r4 @ set TTBR1 to swapper_pg_dir - ARM( add pc, r10, #PROCINFO_INITFUNC ) - THUMB( add r12, r10, #PROCINFO_INITFUNC ) - THUMB( ret r12 ) + ldr r12, [r10, #PROCINFO_INITFUNC] + add r12, r12, r10 + ret r12 1: b __enable_mmu ENDPROC(stext) .ltorg @@ -386,10 +386,10 @@ ENTRY(secondary_startup) ldr r8, [r7, lr] @ get secondary_data.swapper_pg_dir adr lr, BSYM(__enable_mmu) @ return address mov r13, r12 @ __secondary_switched address - ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor - @ (return control reg) - THUMB( add r12, r10, #PROCINFO_INITFUNC ) - THUMB( ret r12 ) + ldr r12, [r10, #PROCINFO_INITFUNC] + add r12, r12, r10 @ initialise processor + @ (return control reg) + ret r12 ENDPROC(secondary_startup) ENDPROC(secondary_startup_arm) diff --git a/arch/arm/kernel/hibernate.c b/arch/arm/kernel/hibernate.c index c4cc50e58c13c3e032031339852c012ca7b344ca..a71501ff6f1877fc9813fd4c3e10c51ae36f04e7 100644 --- a/arch/arm/kernel/hibernate.c +++ b/arch/arm/kernel/hibernate.c @@ -22,6 +22,7 @@ #include #include #include +#include "reboot.h" int pfn_is_nosave(unsigned long pfn) { @@ -61,7 +62,7 @@ static int notrace arch_save_image(unsigned long unused) ret = swsusp_save(); if (ret == 0) - soft_restart(virt_to_phys(cpu_resume)); + _soft_restart(virt_to_phys(cpu_resume), false); return ret; } @@ -86,7 +87,7 @@ static void notrace arch_restore_image(void *unused) for (pbe = restore_pblist; pbe; pbe = pbe->next) copy_page(pbe->orig_address, pbe->address); - soft_restart(virt_to_phys(cpu_resume)); + _soft_restart(virt_to_phys(cpu_resume), false); } static u64 resume_stack[PAGE_SIZE/2/sizeof(u64)] __nosavedata; @@ -99,7 +100,6 @@ static u64 resume_stack[PAGE_SIZE/2/sizeof(u64)] __nosavedata; */ int swsusp_arch_resume(void) { - extern void call_with_stack(void (*fn)(void *), void *arg, void *sp); call_with_stack(arch_restore_image, 0, resume_stack + ARRAY_SIZE(resume_stack)); return 0; diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 7fc70ae21185b7295a6d0390831c0a83e8a45def..dc7d0a95bd3651c2949454027a3b6c47dd77863c 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -648,7 +648,7 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) * Per-cpu breakpoints are not supported by our stepping * mechanism. */ - if (!bp->hw.bp_target) + if (!bp->hw.target) return -EINVAL; /* diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index de2b085ad7535da771a173ed855bcfdee4926c99..8bf3b7c098881b951df038575c6baf14e84df7b9 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -46,7 +46,8 @@ int machine_kexec_prepare(struct kimage *image) * and implements CPU hotplug for the current HW. If not, we won't be * able to kexec reliably, so fail the prepare operation. */ - if (num_possible_cpus() > 1 && !platform_can_cpu_hotplug()) + if (num_possible_cpus() > 1 && platform_can_secondary_boot() && + !platform_can_cpu_hotplug()) return -EINVAL; /* diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 2e11961f65ae0a005d53a22c45753879c7b6c904..af791f4a620592fd66bac091fc45498c70b0d39b 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -98,14 +98,19 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, case R_ARM_PC24: case R_ARM_CALL: case R_ARM_JUMP24: + if (sym->st_value & 3) { + pr_err("%s: section %u reloc %u sym '%s': unsupported interworking call (ARM -> Thumb)\n", + module->name, relindex, i, symname); + return -ENOEXEC; + } + offset = __mem_to_opcode_arm(*(u32 *)loc); offset = (offset & 0x00ffffff) << 2; if (offset & 0x02000000) offset -= 0x04000000; offset += sym->st_value - loc; - if (offset & 3 || - offset <= (s32)0xfe000000 || + if (offset <= (s32)0xfe000000 || offset >= (s32)0x02000000) { pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", module->name, relindex, i, symname, @@ -155,6 +160,22 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, #ifdef CONFIG_THUMB2_KERNEL case R_ARM_THM_CALL: case R_ARM_THM_JUMP24: + /* + * For function symbols, only Thumb addresses are + * allowed (no interworking). + * + * For non-function symbols, the destination + * has no specific ARM/Thumb disposition, so + * the branch is resolved under the assumption + * that interworking is not required. + */ + if (ELF32_ST_TYPE(sym->st_info) == STT_FUNC && + !(sym->st_value & 1)) { + pr_err("%s: section %u reloc %u sym '%s': unsupported interworking call (Thumb -> ARM)\n", + module->name, relindex, i, symname); + return -ENOEXEC; + } + upper = __mem_to_opcode_thumb16(*(u16 *)loc); lower = __mem_to_opcode_thumb16(*(u16 *)(loc + 2)); @@ -182,18 +203,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, offset -= 0x02000000; offset += sym->st_value - loc; - /* - * For function symbols, only Thumb addresses are - * allowed (no interworking). - * - * For non-function symbols, the destination - * has no specific ARM/Thumb disposition, so - * the branch is resolved under the assumption - * that interworking is not required. - */ - if ((ELF32_ST_TYPE(sym->st_info) == STT_FUNC && - !(offset & 1)) || - offset <= (s32)0xff000000 || + if (offset <= (s32)0xff000000 || offset >= (s32)0x01000000) { pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", module->name, relindex, i, symname, diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 557e128e4df08ce711d4bab89952eae0f1d6d7ea..4a86a0133ac30cab95b9a461636b7961f6bd86e2 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -259,20 +259,29 @@ armpmu_add(struct perf_event *event, int flags) } static int -validate_event(struct pmu_hw_events *hw_events, - struct perf_event *event) +validate_event(struct pmu *pmu, struct pmu_hw_events *hw_events, + struct perf_event *event) { - struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + struct arm_pmu *armpmu; if (is_software_event(event)) return 1; + /* + * Reject groups spanning multiple HW PMUs (e.g. CPU + CCI). The + * core perf code won't check that the pmu->ctx == leader->ctx + * until after pmu->event_init(event). + */ + if (event->pmu != pmu) + return 0; + if (event->state < PERF_EVENT_STATE_OFF) return 1; if (event->state == PERF_EVENT_STATE_OFF && !event->attr.enable_on_exec) return 1; + armpmu = to_arm_pmu(event->pmu); return armpmu->get_event_idx(hw_events, event) >= 0; } @@ -288,15 +297,15 @@ validate_group(struct perf_event *event) */ memset(&fake_pmu.used_mask, 0, sizeof(fake_pmu.used_mask)); - if (!validate_event(&fake_pmu, leader)) + if (!validate_event(event->pmu, &fake_pmu, leader)) return -EINVAL; list_for_each_entry(sibling, &leader->sibling_list, group_entry) { - if (!validate_event(&fake_pmu, sibling)) + if (!validate_event(event->pmu, &fake_pmu, sibling)) return -EINVAL; } - if (!validate_event(&fake_pmu, event)) + if (!validate_event(event->pmu, &fake_pmu, event)) return -EINVAL; return 0; diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c index 61b53c46edfa7556827ae552082e79ece19df909..213919ba326fbad35bd356b19bc0c0546cbc70b1 100644 --- a/arch/arm/kernel/perf_event_cpu.c +++ b/arch/arm/kernel/perf_event_cpu.c @@ -92,11 +92,16 @@ static void cpu_pmu_free_irq(struct arm_pmu *cpu_pmu) free_percpu_irq(irq, &hw_events->percpu_pmu); } else { for (i = 0; i < irqs; ++i) { - if (!cpumask_test_and_clear_cpu(i, &cpu_pmu->active_irqs)) + int cpu = i; + + if (cpu_pmu->irq_affinity) + cpu = cpu_pmu->irq_affinity[i]; + + if (!cpumask_test_and_clear_cpu(cpu, &cpu_pmu->active_irqs)) continue; irq = platform_get_irq(pmu_device, i); if (irq >= 0) - free_irq(irq, per_cpu_ptr(&hw_events->percpu_pmu, i)); + free_irq(irq, per_cpu_ptr(&hw_events->percpu_pmu, cpu)); } } } @@ -128,32 +133,37 @@ static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler) on_each_cpu(cpu_pmu_enable_percpu_irq, &irq, 1); } else { for (i = 0; i < irqs; ++i) { + int cpu = i; + err = 0; irq = platform_get_irq(pmu_device, i); if (irq < 0) continue; + if (cpu_pmu->irq_affinity) + cpu = cpu_pmu->irq_affinity[i]; + /* * If we have a single PMU interrupt that we can't shift, * assume that we're running on a uniprocessor machine and * continue. Otherwise, continue without this interrupt. */ - if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) { + if (irq_set_affinity(irq, cpumask_of(cpu)) && irqs > 1) { pr_warn("unable to set irq affinity (irq=%d, cpu=%u)\n", - irq, i); + irq, cpu); continue; } err = request_irq(irq, handler, IRQF_NOBALANCING | IRQF_NO_THREAD, "arm-pmu", - per_cpu_ptr(&hw_events->percpu_pmu, i)); + per_cpu_ptr(&hw_events->percpu_pmu, cpu)); if (err) { pr_err("unable to request IRQ%d for ARM PMU counters\n", irq); return err; } - cpumask_set_cpu(i, &cpu_pmu->active_irqs); + cpumask_set_cpu(cpu, &cpu_pmu->active_irqs); } } @@ -243,6 +253,8 @@ static const struct of_device_id cpu_pmu_of_device_ids[] = { {.compatible = "arm,arm1176-pmu", .data = armv6_1176_pmu_init}, {.compatible = "arm,arm1136-pmu", .data = armv6_1136_pmu_init}, {.compatible = "qcom,krait-pmu", .data = krait_pmu_init}, + {.compatible = "qcom,scorpion-pmu", .data = scorpion_pmu_init}, + {.compatible = "qcom,scorpion-mp-pmu", .data = scorpion_mp_pmu_init}, {}, }; @@ -289,6 +301,53 @@ static int probe_current_pmu(struct arm_pmu *pmu) return ret; } +static int of_pmu_irq_cfg(struct platform_device *pdev) +{ + int i, irq; + int *irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL); + + if (!irqs) + return -ENOMEM; + + /* Don't bother with PPIs; they're already affine */ + irq = platform_get_irq(pdev, 0); + if (irq >= 0 && irq_is_percpu(irq)) + return 0; + + for (i = 0; i < pdev->num_resources; ++i) { + struct device_node *dn; + int cpu; + + dn = of_parse_phandle(pdev->dev.of_node, "interrupt-affinity", + i); + if (!dn) { + pr_warn("Failed to parse %s/interrupt-affinity[%d]\n", + of_node_full_name(pdev->dev.of_node), i); + break; + } + + for_each_possible_cpu(cpu) + if (arch_find_n_match_cpu_physical_id(dn, cpu, NULL)) + break; + + of_node_put(dn); + if (cpu >= nr_cpu_ids) { + pr_warn("Failed to find logical CPU for %s\n", + dn->name); + break; + } + + irqs[i] = cpu; + } + + if (i == pdev->num_resources) + cpu_pmu->irq_affinity = irqs; + else + kfree(irqs); + + return 0; +} + static int cpu_pmu_device_probe(struct platform_device *pdev) { const struct of_device_id *of_id; @@ -313,7 +372,10 @@ static int cpu_pmu_device_probe(struct platform_device *pdev) if (node && (of_id = of_match_node(cpu_pmu_of_device_ids, pdev->dev.of_node))) { init_fn = of_id->data; - ret = init_fn(pmu); + + ret = of_pmu_irq_cfg(pdev); + if (!ret) + ret = init_fn(pmu); } else { ret = probe_current_pmu(pmu); } diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 8993770c47de7ebdb59e5151bf2c4bc7948e19fd..f4207a4dcb013ca4b19b42e3d3c2b5ec9d620fde 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -140,6 +140,23 @@ enum krait_perf_types { KRAIT_PERFCTR_L1_DTLB_ACCESS = 0x12210, }; +/* ARMv7 Scorpion specific event types */ +enum scorpion_perf_types { + SCORPION_LPM0_GROUP0 = 0x4c, + SCORPION_LPM1_GROUP0 = 0x50, + SCORPION_LPM2_GROUP0 = 0x54, + SCORPION_L2LPM_GROUP0 = 0x58, + SCORPION_VLPM_GROUP0 = 0x5c, + + SCORPION_ICACHE_ACCESS = 0x10053, + SCORPION_ICACHE_MISS = 0x10052, + + SCORPION_DTLB_ACCESS = 0x12013, + SCORPION_DTLB_MISS = 0x12012, + + SCORPION_ITLB_MISS = 0x12021, +}; + /* * Cortex-A8 HW events mapping * @@ -481,6 +498,49 @@ static const unsigned krait_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }; +/* + * Scorpion HW events mapping + */ +static const unsigned scorpion_perf_map[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, + [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, +}; + +static const unsigned scorpion_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { + PERF_CACHE_MAP_ALL_UNSUPPORTED, + /* + * The performance counters don't differentiate between read and write + * accesses/misses so this isn't strictly correct, but it's the best we + * can do. Writes and reads get combined. + */ + [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = SCORPION_ICACHE_ACCESS, + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = SCORPION_ICACHE_MISS, + /* + * Only ITLB misses and DTLB refills are supported. If users want the + * DTLB refills misses a raw counter must be used. + */ + [C(DTLB)][C(OP_READ)][C(RESULT_ACCESS)] = SCORPION_DTLB_ACCESS, + [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = SCORPION_DTLB_MISS, + [C(DTLB)][C(OP_WRITE)][C(RESULT_ACCESS)] = SCORPION_DTLB_ACCESS, + [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = SCORPION_DTLB_MISS, + [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = SCORPION_ITLB_MISS, + [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = SCORPION_ITLB_MISS, + [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, +}; + /* * Perf Events' indices */ @@ -976,6 +1036,12 @@ static int krait_map_event_no_branch(struct perf_event *event) &krait_perf_cache_map, 0xFFFFF); } +static int scorpion_map_event(struct perf_event *event) +{ + return armpmu_map_event(event, &scorpion_perf_map, + &scorpion_perf_cache_map, 0xFFFFF); +} + static void armv7pmu_init(struct arm_pmu *cpu_pmu) { cpu_pmu->handle_irq = armv7pmu_handle_irq; @@ -1103,6 +1169,12 @@ static int armv7_a17_pmu_init(struct arm_pmu *cpu_pmu) #define KRAIT_EVENT_MASK (KRAIT_EVENT | VENUM_EVENT) #define PMRESRn_EN BIT(31) +#define EVENT_REGION(event) (((event) >> 12) & 0xf) /* R */ +#define EVENT_GROUP(event) ((event) & 0xf) /* G */ +#define EVENT_CODE(event) (((event) >> 4) & 0xff) /* CC */ +#define EVENT_VENUM(event) (!!(event & VENUM_EVENT)) /* N=2 */ +#define EVENT_CPU(event) (!!(event & KRAIT_EVENT)) /* N=1 */ + static u32 krait_read_pmresrn(int n) { u32 val; @@ -1141,19 +1213,19 @@ static void krait_write_pmresrn(int n, u32 val) } } -static u32 krait_read_vpmresr0(void) +static u32 venum_read_pmresr(void) { u32 val; asm volatile("mrc p10, 7, %0, c11, c0, 0" : "=r" (val)); return val; } -static void krait_write_vpmresr0(u32 val) +static void venum_write_pmresr(u32 val) { asm volatile("mcr p10, 7, %0, c11, c0, 0" : : "r" (val)); } -static void krait_pre_vpmresr0(u32 *venum_orig_val, u32 *fp_orig_val) +static void venum_pre_pmresr(u32 *venum_orig_val, u32 *fp_orig_val) { u32 venum_new_val; u32 fp_new_val; @@ -1170,7 +1242,7 @@ static void krait_pre_vpmresr0(u32 *venum_orig_val, u32 *fp_orig_val) fmxr(FPEXC, fp_new_val); } -static void krait_post_vpmresr0(u32 venum_orig_val, u32 fp_orig_val) +static void venum_post_pmresr(u32 venum_orig_val, u32 fp_orig_val) { BUG_ON(preemptible()); /* Restore FPEXC */ @@ -1193,16 +1265,11 @@ static void krait_evt_setup(int idx, u32 config_base) u32 val; u32 mask; u32 vval, fval; - unsigned int region; - unsigned int group; - unsigned int code; + unsigned int region = EVENT_REGION(config_base); + unsigned int group = EVENT_GROUP(config_base); + unsigned int code = EVENT_CODE(config_base); unsigned int group_shift; - bool venum_event; - - venum_event = !!(config_base & VENUM_EVENT); - region = (config_base >> 12) & 0xf; - code = (config_base >> 4) & 0xff; - group = (config_base >> 0) & 0xf; + bool venum_event = EVENT_VENUM(config_base); group_shift = group * 8; mask = 0xff << group_shift; @@ -1217,16 +1284,14 @@ static void krait_evt_setup(int idx, u32 config_base) val |= config_base & (ARMV7_EXCLUDE_USER | ARMV7_EXCLUDE_PL1); armv7_pmnc_write_evtsel(idx, val); - asm volatile("mcr p15, 0, %0, c9, c15, 0" : : "r" (0)); - if (venum_event) { - krait_pre_vpmresr0(&vval, &fval); - val = krait_read_vpmresr0(); + venum_pre_pmresr(&vval, &fval); + val = venum_read_pmresr(); val &= ~mask; val |= code << group_shift; val |= PMRESRn_EN; - krait_write_vpmresr0(val); - krait_post_vpmresr0(vval, fval); + venum_write_pmresr(val); + venum_post_pmresr(vval, fval); } else { val = krait_read_pmresrn(region); val &= ~mask; @@ -1236,7 +1301,7 @@ static void krait_evt_setup(int idx, u32 config_base) } } -static u32 krait_clear_pmresrn_group(u32 val, int group) +static u32 clear_pmresrn_group(u32 val, int group) { u32 mask; int group_shift; @@ -1256,23 +1321,19 @@ static void krait_clearpmu(u32 config_base) { u32 val; u32 vval, fval; - unsigned int region; - unsigned int group; - bool venum_event; - - venum_event = !!(config_base & VENUM_EVENT); - region = (config_base >> 12) & 0xf; - group = (config_base >> 0) & 0xf; + unsigned int region = EVENT_REGION(config_base); + unsigned int group = EVENT_GROUP(config_base); + bool venum_event = EVENT_VENUM(config_base); if (venum_event) { - krait_pre_vpmresr0(&vval, &fval); - val = krait_read_vpmresr0(); - val = krait_clear_pmresrn_group(val, group); - krait_write_vpmresr0(val); - krait_post_vpmresr0(vval, fval); + venum_pre_pmresr(&vval, &fval); + val = venum_read_pmresr(); + val = clear_pmresrn_group(val, group); + venum_write_pmresr(val); + venum_post_pmresr(vval, fval); } else { val = krait_read_pmresrn(region); - val = krait_clear_pmresrn_group(val, group); + val = clear_pmresrn_group(val, group); krait_write_pmresrn(region, val); } } @@ -1342,6 +1403,8 @@ static void krait_pmu_enable_event(struct perf_event *event) static void krait_pmu_reset(void *info) { u32 vval, fval; + struct arm_pmu *cpu_pmu = info; + u32 idx, nb_cnt = cpu_pmu->num_events; armv7pmu_reset(info); @@ -1350,9 +1413,16 @@ static void krait_pmu_reset(void *info) krait_write_pmresrn(1, 0); krait_write_pmresrn(2, 0); - krait_pre_vpmresr0(&vval, &fval); - krait_write_vpmresr0(0); - krait_post_vpmresr0(vval, fval); + venum_pre_pmresr(&vval, &fval); + venum_write_pmresr(0); + venum_post_pmresr(vval, fval); + + /* Reset PMxEVNCTCR to sane default */ + for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) { + armv7_pmnc_select_counter(idx); + asm volatile("mcr p15, 0, %0, c9, c15, 0" : : "r" (0)); + } + } static int krait_event_to_bit(struct perf_event *event, unsigned int region, @@ -1386,26 +1456,18 @@ static int krait_pmu_get_event_idx(struct pmu_hw_events *cpuc, { int idx; int bit = -1; - unsigned int prefix; - unsigned int region; - unsigned int code; - unsigned int group; - bool krait_event; struct hw_perf_event *hwc = &event->hw; + unsigned int region = EVENT_REGION(hwc->config_base); + unsigned int code = EVENT_CODE(hwc->config_base); + unsigned int group = EVENT_GROUP(hwc->config_base); + bool venum_event = EVENT_VENUM(hwc->config_base); + bool krait_event = EVENT_CPU(hwc->config_base); - region = (hwc->config_base >> 12) & 0xf; - code = (hwc->config_base >> 4) & 0xff; - group = (hwc->config_base >> 0) & 0xf; - krait_event = !!(hwc->config_base & KRAIT_EVENT_MASK); - - if (krait_event) { + if (venum_event || krait_event) { /* Ignore invalid events */ if (group > 3 || region > 2) return -EINVAL; - prefix = hwc->config_base & KRAIT_EVENT_MASK; - if (prefix != KRAIT_EVENT && prefix != VENUM_EVENT) - return -EINVAL; - if (prefix == VENUM_EVENT && (code & 0xe0)) + if (venum_event && (code & 0xe0)) return -EINVAL; bit = krait_event_to_bit(event, region, group); @@ -1425,15 +1487,12 @@ static void krait_pmu_clear_event_idx(struct pmu_hw_events *cpuc, { int bit; struct hw_perf_event *hwc = &event->hw; - unsigned int region; - unsigned int group; - bool krait_event; + unsigned int region = EVENT_REGION(hwc->config_base); + unsigned int group = EVENT_GROUP(hwc->config_base); + bool venum_event = EVENT_VENUM(hwc->config_base); + bool krait_event = EVENT_CPU(hwc->config_base); - region = (hwc->config_base >> 12) & 0xf; - group = (hwc->config_base >> 0) & 0xf; - krait_event = !!(hwc->config_base & KRAIT_EVENT_MASK); - - if (krait_event) { + if (venum_event || krait_event) { bit = krait_event_to_bit(event, region, group); clear_bit(bit, cpuc->used_mask); } @@ -1458,6 +1517,344 @@ static int krait_pmu_init(struct arm_pmu *cpu_pmu) cpu_pmu->clear_event_idx = krait_pmu_clear_event_idx; return 0; } + +/* + * Scorpion Local Performance Monitor Register (LPMn) + * + * 31 30 24 16 8 0 + * +--------------------------------+ + * LPM0 | EN | CC | CC | CC | CC | N = 1, R = 0 + * +--------------------------------+ + * LPM1 | EN | CC | CC | CC | CC | N = 1, R = 1 + * +--------------------------------+ + * LPM2 | EN | CC | CC | CC | CC | N = 1, R = 2 + * +--------------------------------+ + * L2LPM | EN | CC | CC | CC | CC | N = 1, R = 3 + * +--------------------------------+ + * VLPM | EN | CC | CC | CC | CC | N = 2, R = ? + * +--------------------------------+ + * EN | G=3 | G=2 | G=1 | G=0 + * + * + * Event Encoding: + * + * hwc->config_base = 0xNRCCG + * + * N = prefix, 1 for Scorpion CPU (LPMn/L2LPM), 2 for Venum VFP (VLPM) + * R = region register + * CC = class of events the group G is choosing from + * G = group or particular event + * + * Example: 0x12021 is a Scorpion CPU event in LPM2's group 1 with code 2 + * + * A region (R) corresponds to a piece of the CPU (execution unit, instruction + * unit, etc.) while the event code (CC) corresponds to a particular class of + * events (interrupts for example). An event code is broken down into + * groups (G) that can be mapped into the PMU (irq, fiqs, and irq+fiqs for + * example). + */ + +static u32 scorpion_read_pmresrn(int n) +{ + u32 val; + + switch (n) { + case 0: + asm volatile("mrc p15, 0, %0, c15, c0, 0" : "=r" (val)); + break; + case 1: + asm volatile("mrc p15, 1, %0, c15, c0, 0" : "=r" (val)); + break; + case 2: + asm volatile("mrc p15, 2, %0, c15, c0, 0" : "=r" (val)); + break; + case 3: + asm volatile("mrc p15, 3, %0, c15, c2, 0" : "=r" (val)); + break; + default: + BUG(); /* Should be validated in scorpion_pmu_get_event_idx() */ + } + + return val; +} + +static void scorpion_write_pmresrn(int n, u32 val) +{ + switch (n) { + case 0: + asm volatile("mcr p15, 0, %0, c15, c0, 0" : : "r" (val)); + break; + case 1: + asm volatile("mcr p15, 1, %0, c15, c0, 0" : : "r" (val)); + break; + case 2: + asm volatile("mcr p15, 2, %0, c15, c0, 0" : : "r" (val)); + break; + case 3: + asm volatile("mcr p15, 3, %0, c15, c2, 0" : : "r" (val)); + break; + default: + BUG(); /* Should be validated in scorpion_pmu_get_event_idx() */ + } +} + +static u32 scorpion_get_pmresrn_event(unsigned int region) +{ + static const u32 pmresrn_table[] = { SCORPION_LPM0_GROUP0, + SCORPION_LPM1_GROUP0, + SCORPION_LPM2_GROUP0, + SCORPION_L2LPM_GROUP0 }; + return pmresrn_table[region]; +} + +static void scorpion_evt_setup(int idx, u32 config_base) +{ + u32 val; + u32 mask; + u32 vval, fval; + unsigned int region = EVENT_REGION(config_base); + unsigned int group = EVENT_GROUP(config_base); + unsigned int code = EVENT_CODE(config_base); + unsigned int group_shift; + bool venum_event = EVENT_VENUM(config_base); + + group_shift = group * 8; + mask = 0xff << group_shift; + + /* Configure evtsel for the region and group */ + if (venum_event) + val = SCORPION_VLPM_GROUP0; + else + val = scorpion_get_pmresrn_event(region); + val += group; + /* Mix in mode-exclusion bits */ + val |= config_base & (ARMV7_EXCLUDE_USER | ARMV7_EXCLUDE_PL1); + armv7_pmnc_write_evtsel(idx, val); + + asm volatile("mcr p15, 0, %0, c9, c15, 0" : : "r" (0)); + + if (venum_event) { + venum_pre_pmresr(&vval, &fval); + val = venum_read_pmresr(); + val &= ~mask; + val |= code << group_shift; + val |= PMRESRn_EN; + venum_write_pmresr(val); + venum_post_pmresr(vval, fval); + } else { + val = scorpion_read_pmresrn(region); + val &= ~mask; + val |= code << group_shift; + val |= PMRESRn_EN; + scorpion_write_pmresrn(region, val); + } +} + +static void scorpion_clearpmu(u32 config_base) +{ + u32 val; + u32 vval, fval; + unsigned int region = EVENT_REGION(config_base); + unsigned int group = EVENT_GROUP(config_base); + bool venum_event = EVENT_VENUM(config_base); + + if (venum_event) { + venum_pre_pmresr(&vval, &fval); + val = venum_read_pmresr(); + val = clear_pmresrn_group(val, group); + venum_write_pmresr(val); + venum_post_pmresr(vval, fval); + } else { + val = scorpion_read_pmresrn(region); + val = clear_pmresrn_group(val, group); + scorpion_write_pmresrn(region, val); + } +} + +static void scorpion_pmu_disable_event(struct perf_event *event) +{ + unsigned long flags; + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events); + + /* Disable counter and interrupt */ + raw_spin_lock_irqsave(&events->pmu_lock, flags); + + /* Disable counter */ + armv7_pmnc_disable_counter(idx); + + /* + * Clear pmresr code (if destined for PMNx counters) + */ + if (hwc->config_base & KRAIT_EVENT_MASK) + scorpion_clearpmu(hwc->config_base); + + /* Disable interrupt for this counter */ + armv7_pmnc_disable_intens(idx); + + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); +} + +static void scorpion_pmu_enable_event(struct perf_event *event) +{ + unsigned long flags; + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events); + + /* + * Enable counter and interrupt, and set the counter to count + * the event that we're interested in. + */ + raw_spin_lock_irqsave(&events->pmu_lock, flags); + + /* Disable counter */ + armv7_pmnc_disable_counter(idx); + + /* + * Set event (if destined for PMNx counters) + * We don't set the event for the cycle counter because we + * don't have the ability to perform event filtering. + */ + if (hwc->config_base & KRAIT_EVENT_MASK) + scorpion_evt_setup(idx, hwc->config_base); + else if (idx != ARMV7_IDX_CYCLE_COUNTER) + armv7_pmnc_write_evtsel(idx, hwc->config_base); + + /* Enable interrupt for this counter */ + armv7_pmnc_enable_intens(idx); + + /* Enable counter */ + armv7_pmnc_enable_counter(idx); + + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); +} + +static void scorpion_pmu_reset(void *info) +{ + u32 vval, fval; + struct arm_pmu *cpu_pmu = info; + u32 idx, nb_cnt = cpu_pmu->num_events; + + armv7pmu_reset(info); + + /* Clear all pmresrs */ + scorpion_write_pmresrn(0, 0); + scorpion_write_pmresrn(1, 0); + scorpion_write_pmresrn(2, 0); + scorpion_write_pmresrn(3, 0); + + venum_pre_pmresr(&vval, &fval); + venum_write_pmresr(0); + venum_post_pmresr(vval, fval); + + /* Reset PMxEVNCTCR to sane default */ + for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) { + armv7_pmnc_select_counter(idx); + asm volatile("mcr p15, 0, %0, c9, c15, 0" : : "r" (0)); + } +} + +static int scorpion_event_to_bit(struct perf_event *event, unsigned int region, + unsigned int group) +{ + int bit; + struct hw_perf_event *hwc = &event->hw; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + + if (hwc->config_base & VENUM_EVENT) + bit = SCORPION_VLPM_GROUP0; + else + bit = scorpion_get_pmresrn_event(region); + bit -= scorpion_get_pmresrn_event(0); + bit += group; + /* + * Lower bits are reserved for use by the counters (see + * armv7pmu_get_event_idx() for more info) + */ + bit += ARMV7_IDX_COUNTER_LAST(cpu_pmu) + 1; + + return bit; +} + +/* + * We check for column exclusion constraints here. + * Two events cant use the same group within a pmresr register. + */ +static int scorpion_pmu_get_event_idx(struct pmu_hw_events *cpuc, + struct perf_event *event) +{ + int idx; + int bit = -1; + struct hw_perf_event *hwc = &event->hw; + unsigned int region = EVENT_REGION(hwc->config_base); + unsigned int group = EVENT_GROUP(hwc->config_base); + bool venum_event = EVENT_VENUM(hwc->config_base); + bool scorpion_event = EVENT_CPU(hwc->config_base); + + if (venum_event || scorpion_event) { + /* Ignore invalid events */ + if (group > 3 || region > 3) + return -EINVAL; + + bit = scorpion_event_to_bit(event, region, group); + if (test_and_set_bit(bit, cpuc->used_mask)) + return -EAGAIN; + } + + idx = armv7pmu_get_event_idx(cpuc, event); + if (idx < 0 && bit >= 0) + clear_bit(bit, cpuc->used_mask); + + return idx; +} + +static void scorpion_pmu_clear_event_idx(struct pmu_hw_events *cpuc, + struct perf_event *event) +{ + int bit; + struct hw_perf_event *hwc = &event->hw; + unsigned int region = EVENT_REGION(hwc->config_base); + unsigned int group = EVENT_GROUP(hwc->config_base); + bool venum_event = EVENT_VENUM(hwc->config_base); + bool scorpion_event = EVENT_CPU(hwc->config_base); + + if (venum_event || scorpion_event) { + bit = scorpion_event_to_bit(event, region, group); + clear_bit(bit, cpuc->used_mask); + } +} + +static int scorpion_pmu_init(struct arm_pmu *cpu_pmu) +{ + armv7pmu_init(cpu_pmu); + cpu_pmu->name = "armv7_scorpion"; + cpu_pmu->map_event = scorpion_map_event; + cpu_pmu->num_events = armv7_read_num_pmnc_events(); + cpu_pmu->reset = scorpion_pmu_reset; + cpu_pmu->enable = scorpion_pmu_enable_event; + cpu_pmu->disable = scorpion_pmu_disable_event; + cpu_pmu->get_event_idx = scorpion_pmu_get_event_idx; + cpu_pmu->clear_event_idx = scorpion_pmu_clear_event_idx; + return 0; +} + +static int scorpion_mp_pmu_init(struct arm_pmu *cpu_pmu) +{ + armv7pmu_init(cpu_pmu); + cpu_pmu->name = "armv7_scorpion_mp"; + cpu_pmu->map_event = scorpion_map_event; + cpu_pmu->num_events = armv7_read_num_pmnc_events(); + cpu_pmu->reset = scorpion_pmu_reset; + cpu_pmu->enable = scorpion_pmu_enable_event; + cpu_pmu->disable = scorpion_pmu_disable_event; + cpu_pmu->get_event_idx = scorpion_pmu_get_event_idx; + cpu_pmu->clear_event_idx = scorpion_pmu_clear_event_idx; + return 0; +} #else static inline int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu) { @@ -1498,4 +1895,14 @@ static inline int krait_pmu_init(struct arm_pmu *cpu_pmu) { return -ENODEV; } + +static inline int scorpion_pmu_init(struct arm_pmu *cpu_pmu) +{ + return -ENODEV; +} + +static inline int scorpion_mp_pmu_init(struct arm_pmu *cpu_pmu) +{ + return -ENODEV; +} #endif /* CONFIG_CPU_V7 */ diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index fdfa3a78ec8cb8d7c96098f58175eea28e8a6da5..f192a2a4171935720cfc702953703c78078579cc 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -17,12 +17,9 @@ #include #include #include -#include -#include #include #include #include -#include #include #include #include @@ -31,16 +28,14 @@ #include #include #include -#include -#include -#include #include #include #include #include #include #include +#include #ifdef CONFIG_CC_STACKPROTECTOR #include @@ -59,69 +54,6 @@ static const char *isa_modes[] __maybe_unused = { "ARM" , "Thumb" , "Jazelle", "ThumbEE" }; -extern void call_with_stack(void (*fn)(void *), void *arg, void *sp); -typedef void (*phys_reset_t)(unsigned long); - -/* - * A temporary stack to use for CPU reset. This is static so that we - * don't clobber it with the identity mapping. When running with this - * stack, any references to the current task *will not work* so you - * should really do as little as possible before jumping to your reset - * code. - */ -static u64 soft_restart_stack[16]; - -static void __soft_restart(void *addr) -{ - phys_reset_t phys_reset; - - /* Take out a flat memory mapping. */ - setup_mm_for_reboot(); - - /* Clean and invalidate caches */ - flush_cache_all(); - - /* Turn off caching */ - cpu_proc_fin(); - - /* Push out any further dirty data, and ensure cache is empty */ - flush_cache_all(); - - /* Switch to the identity mapping. */ - phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); - phys_reset((unsigned long)addr); - - /* Should never get here. */ - BUG(); -} - -void soft_restart(unsigned long addr) -{ - u64 *stack = soft_restart_stack + ARRAY_SIZE(soft_restart_stack); - - /* Disable interrupts first */ - raw_local_irq_disable(); - local_fiq_disable(); - - /* Disable the L2 if we're the last man standing. */ - if (num_online_cpus() == 1) - outer_disable(); - - /* Change to the new stack and continue with the reset. */ - call_with_stack(__soft_restart, (void *)addr, (void *)stack); - - /* Should never get here. */ - BUG(); -} - -/* - * Function pointers to optional machine specific functions - */ -void (*pm_power_off)(void); -EXPORT_SYMBOL(pm_power_off); - -void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd); - /* * This is our default idle handler. */ @@ -166,79 +98,6 @@ void arch_cpu_idle_dead(void) } #endif -/* - * Called by kexec, immediately prior to machine_kexec(). - * - * This must completely disable all secondary CPUs; simply causing those CPUs - * to execute e.g. a RAM-based pin loop is not sufficient. This allows the - * kexec'd kernel to use any and all RAM as it sees fit, without having to - * avoid any code or data used by any SW CPU pin loop. The CPU hotplug - * functionality embodied in disable_nonboot_cpus() to achieve this. - */ -void machine_shutdown(void) -{ - disable_nonboot_cpus(); -} - -/* - * Halting simply requires that the secondary CPUs stop performing any - * activity (executing tasks, handling interrupts). smp_send_stop() - * achieves this. - */ -void machine_halt(void) -{ - local_irq_disable(); - smp_send_stop(); - - local_irq_disable(); - while (1); -} - -/* - * Power-off simply requires that the secondary CPUs stop performing any - * activity (executing tasks, handling interrupts). smp_send_stop() - * achieves this. When the system power is turned off, it will take all CPUs - * with it. - */ -void machine_power_off(void) -{ - local_irq_disable(); - smp_send_stop(); - - if (pm_power_off) - pm_power_off(); -} - -/* - * Restart requires that the secondary CPUs stop performing any activity - * while the primary CPU resets the system. Systems with a single CPU can - * use soft_restart() as their machine descriptor's .restart hook, since that - * will cause the only available CPU to reset. Systems with multiple CPUs must - * provide a HW restart implementation, to ensure that all CPUs reset at once. - * This is required so that any code running after reset on the primary CPU - * doesn't have to co-ordinate with other CPUs to ensure they aren't still - * executing pre-reset code, and using RAM that the primary CPU's code wishes - * to use. Implementing such co-ordination would be essentially impossible. - */ -void machine_restart(char *cmd) -{ - local_irq_disable(); - smp_send_stop(); - - if (arm_pm_restart) - arm_pm_restart(reboot_mode, cmd); - else - do_kernel_restart(cmd); - - /* Give a grace period for failure to restart of 1s */ - mdelay(1000); - - /* Whoops - the platform was unable to reboot. Tell the user! */ - printk("Reboot failed -- System halted\n"); - local_irq_disable(); - while (1); -} - void __show_regs(struct pt_regs *regs) { unsigned long flags; @@ -475,7 +334,7 @@ const char *arch_vma_name(struct vm_area_struct *vma) } /* If possible, provide a placement hint at a random offset from the - * stack for the signal page. + * stack for the sigpage and vdso pages. */ static unsigned long sigpage_addr(const struct mm_struct *mm, unsigned int npages) @@ -519,6 +378,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) { struct mm_struct *mm = current->mm; struct vm_area_struct *vma; + unsigned long npages; unsigned long addr; unsigned long hint; int ret = 0; @@ -528,9 +388,12 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) if (!signal_page) return -ENOMEM; + npages = 1; /* for sigpage */ + npages += vdso_total_pages; + down_write(&mm->mmap_sem); - hint = sigpage_addr(mm, 1); - addr = get_unmapped_area(NULL, hint, PAGE_SIZE, 0, 0); + hint = sigpage_addr(mm, npages); + addr = get_unmapped_area(NULL, hint, npages << PAGE_SHIFT, 0, 0); if (IS_ERR_VALUE(addr)) { ret = addr; goto up_fail; @@ -547,6 +410,12 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) mm->context.sigpage = addr; + /* Unlike the sigpage, failure to install the vdso is unlikely + * to be fatal to the process, so no error check needed + * here. + */ + arm_install_vdso(mm, addr + PAGE_SIZE); + up_fail: up_write(&mm->mmap_sem); return ret; diff --git a/arch/arm/kernel/psci-call.S b/arch/arm/kernel/psci-call.S new file mode 100644 index 0000000000000000000000000000000000000000..a78e9e1e206dee03c7f16e67a30eb9a74159e9ab --- /dev/null +++ b/arch/arm/kernel/psci-call.S @@ -0,0 +1,31 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2015 ARM Limited + * + * Author: Mark Rutland + */ + +#include + +#include +#include + +/* int __invoke_psci_fn_hvc(u32 function_id, u32 arg0, u32 arg1, u32 arg2) */ +ENTRY(__invoke_psci_fn_hvc) + __HVC(0) + bx lr +ENDPROC(__invoke_psci_fn_hvc) + +/* int __invoke_psci_fn_smc(u32 function_id, u32 arg0, u32 arg1, u32 arg2) */ +ENTRY(__invoke_psci_fn_smc) + __SMC(0) + bx lr +ENDPROC(__invoke_psci_fn_smc) diff --git a/arch/arm/kernel/psci.c b/arch/arm/kernel/psci.c index f73891b6b7300dc67e353a8694a035e9a212c2d7..f90fdf4ce7c7230c4f3e75da030ca7218bb7845f 100644 --- a/arch/arm/kernel/psci.c +++ b/arch/arm/kernel/psci.c @@ -23,8 +23,6 @@ #include #include -#include -#include #include #include @@ -33,6 +31,9 @@ struct psci_operations psci_ops; static int (*invoke_psci_fn)(u32, u32, u32, u32); typedef int (*psci_initcall_t)(const struct device_node *); +asmlinkage int __invoke_psci_fn_hvc(u32, u32, u32, u32); +asmlinkage int __invoke_psci_fn_smc(u32, u32, u32, u32); + enum psci_function { PSCI_FN_CPU_SUSPEND, PSCI_FN_CPU_ON, @@ -71,40 +72,6 @@ static u32 psci_power_state_pack(struct psci_power_state state) & PSCI_0_2_POWER_STATE_AFFL_MASK); } -/* - * The following two functions are invoked via the invoke_psci_fn pointer - * and will not be inlined, allowing us to piggyback on the AAPCS. - */ -static noinline int __invoke_psci_fn_hvc(u32 function_id, u32 arg0, u32 arg1, - u32 arg2) -{ - asm volatile( - __asmeq("%0", "r0") - __asmeq("%1", "r1") - __asmeq("%2", "r2") - __asmeq("%3", "r3") - __HVC(0) - : "+r" (function_id) - : "r" (arg0), "r" (arg1), "r" (arg2)); - - return function_id; -} - -static noinline int __invoke_psci_fn_smc(u32 function_id, u32 arg0, u32 arg1, - u32 arg2) -{ - asm volatile( - __asmeq("%0", "r0") - __asmeq("%1", "r1") - __asmeq("%2", "r2") - __asmeq("%3", "r3") - __SMC(0) - : "+r" (function_id) - : "r" (arg0), "r" (arg1), "r" (arg2)); - - return function_id; -} - static int psci_get_version(void) { int err; diff --git a/arch/arm/kernel/reboot.c b/arch/arm/kernel/reboot.c new file mode 100644 index 0000000000000000000000000000000000000000..1a4d232796be67787a305fabb35a1955fe909f94 --- /dev/null +++ b/arch/arm/kernel/reboot.c @@ -0,0 +1,155 @@ +/* + * Copyright (C) 1996-2000 Russell King - Converted to ARM. + * Original Copyright (C) 1995 Linus Torvalds + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +#include +#include + +#include "reboot.h" + +typedef void (*phys_reset_t)(unsigned long); + +/* + * Function pointers to optional machine specific functions + */ +void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd); +void (*pm_power_off)(void); +EXPORT_SYMBOL(pm_power_off); + +/* + * A temporary stack to use for CPU reset. This is static so that we + * don't clobber it with the identity mapping. When running with this + * stack, any references to the current task *will not work* so you + * should really do as little as possible before jumping to your reset + * code. + */ +static u64 soft_restart_stack[16]; + +static void __soft_restart(void *addr) +{ + phys_reset_t phys_reset; + + /* Take out a flat memory mapping. */ + setup_mm_for_reboot(); + + /* Clean and invalidate caches */ + flush_cache_all(); + + /* Turn off caching */ + cpu_proc_fin(); + + /* Push out any further dirty data, and ensure cache is empty */ + flush_cache_all(); + + /* Switch to the identity mapping. */ + phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); + phys_reset((unsigned long)addr); + + /* Should never get here. */ + BUG(); +} + +void _soft_restart(unsigned long addr, bool disable_l2) +{ + u64 *stack = soft_restart_stack + ARRAY_SIZE(soft_restart_stack); + + /* Disable interrupts first */ + raw_local_irq_disable(); + local_fiq_disable(); + + /* Disable the L2 if we're the last man standing. */ + if (disable_l2) + outer_disable(); + + /* Change to the new stack and continue with the reset. */ + call_with_stack(__soft_restart, (void *)addr, (void *)stack); + + /* Should never get here. */ + BUG(); +} + +void soft_restart(unsigned long addr) +{ + _soft_restart(addr, num_online_cpus() == 1); +} + +/* + * Called by kexec, immediately prior to machine_kexec(). + * + * This must completely disable all secondary CPUs; simply causing those CPUs + * to execute e.g. a RAM-based pin loop is not sufficient. This allows the + * kexec'd kernel to use any and all RAM as it sees fit, without having to + * avoid any code or data used by any SW CPU pin loop. The CPU hotplug + * functionality embodied in disable_nonboot_cpus() to achieve this. + */ +void machine_shutdown(void) +{ + disable_nonboot_cpus(); +} + +/* + * Halting simply requires that the secondary CPUs stop performing any + * activity (executing tasks, handling interrupts). smp_send_stop() + * achieves this. + */ +void machine_halt(void) +{ + local_irq_disable(); + smp_send_stop(); + + local_irq_disable(); + while (1); +} + +/* + * Power-off simply requires that the secondary CPUs stop performing any + * activity (executing tasks, handling interrupts). smp_send_stop() + * achieves this. When the system power is turned off, it will take all CPUs + * with it. + */ +void machine_power_off(void) +{ + local_irq_disable(); + smp_send_stop(); + + if (pm_power_off) + pm_power_off(); +} + +/* + * Restart requires that the secondary CPUs stop performing any activity + * while the primary CPU resets the system. Systems with a single CPU can + * use soft_restart() as their machine descriptor's .restart hook, since that + * will cause the only available CPU to reset. Systems with multiple CPUs must + * provide a HW restart implementation, to ensure that all CPUs reset at once. + * This is required so that any code running after reset on the primary CPU + * doesn't have to co-ordinate with other CPUs to ensure they aren't still + * executing pre-reset code, and using RAM that the primary CPU's code wishes + * to use. Implementing such co-ordination would be essentially impossible. + */ +void machine_restart(char *cmd) +{ + local_irq_disable(); + smp_send_stop(); + + if (arm_pm_restart) + arm_pm_restart(reboot_mode, cmd); + else + do_kernel_restart(cmd); + + /* Give a grace period for failure to restart of 1s */ + mdelay(1000); + + /* Whoops - the platform was unable to reboot. Tell the user! */ + printk("Reboot failed -- System halted\n"); + local_irq_disable(); + while (1); +} diff --git a/arch/arm/kernel/reboot.h b/arch/arm/kernel/reboot.h new file mode 100644 index 0000000000000000000000000000000000000000..bf7a0b1f076edb1ecabd504d2380bad9611a8bca --- /dev/null +++ b/arch/arm/kernel/reboot.h @@ -0,0 +1,7 @@ +#ifndef REBOOT_H +#define REBOOT_H + +extern void call_with_stack(void (*fn)(void *), void *arg, void *sp); +extern void _soft_restart(unsigned long addr, bool disable_l2); + +#endif diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c index 24b4a04846ebe749c3ce5ec4fc2b82a9961c2a5f..36ed35073289b4af2c3053abfeb9e4bcb892c2b4 100644 --- a/arch/arm/kernel/return_address.c +++ b/arch/arm/kernel/return_address.c @@ -56,8 +56,6 @@ void *return_address(unsigned int level) return NULL; } -#else /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) */ - -#endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) / else */ +#endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) */ EXPORT_SYMBOL_GPL(return_address); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 1d60bebea4b8b7923748cd6eb2d25fc4299bfc32..6c777e908a2446020b1fc88294ace488fb6098f3 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -372,30 +372,48 @@ void __init early_print(const char *str, ...) static void __init cpuid_init_hwcaps(void) { - unsigned int divide_instrs, vmsa; + int block; + u32 isar5; if (cpu_architecture() < CPU_ARCH_ARMv7) return; - divide_instrs = (read_cpuid_ext(CPUID_EXT_ISAR0) & 0x0f000000) >> 24; - - switch (divide_instrs) { - case 2: + block = cpuid_feature_extract(CPUID_EXT_ISAR0, 24); + if (block >= 2) elf_hwcap |= HWCAP_IDIVA; - case 1: + if (block >= 1) elf_hwcap |= HWCAP_IDIVT; - } /* LPAE implies atomic ldrd/strd instructions */ - vmsa = (read_cpuid_ext(CPUID_EXT_MMFR0) & 0xf) >> 0; - if (vmsa >= 5) + block = cpuid_feature_extract(CPUID_EXT_MMFR0, 0); + if (block >= 5) elf_hwcap |= HWCAP_LPAE; + + /* check for supported v8 Crypto instructions */ + isar5 = read_cpuid_ext(CPUID_EXT_ISAR5); + + block = cpuid_feature_extract_field(isar5, 4); + if (block >= 2) + elf_hwcap2 |= HWCAP2_PMULL; + if (block >= 1) + elf_hwcap2 |= HWCAP2_AES; + + block = cpuid_feature_extract_field(isar5, 8); + if (block >= 1) + elf_hwcap2 |= HWCAP2_SHA1; + + block = cpuid_feature_extract_field(isar5, 12); + if (block >= 1) + elf_hwcap2 |= HWCAP2_SHA2; + + block = cpuid_feature_extract_field(isar5, 16); + if (block >= 1) + elf_hwcap2 |= HWCAP2_CRC32; } static void __init elf_hwcap_fixup(void) { unsigned id = read_cpuid_id(); - unsigned sync_prim; /* * HWCAP_TLS is available only on 1136 r1p0 and later, @@ -416,9 +434,9 @@ static void __init elf_hwcap_fixup(void) * avoid advertising SWP; it may not be atomic with * multiprocessing cores. */ - sync_prim = ((read_cpuid_ext(CPUID_EXT_ISAR3) >> 8) & 0xf0) | - ((read_cpuid_ext(CPUID_EXT_ISAR4) >> 20) & 0x0f); - if (sync_prim >= 0x13) + if (cpuid_feature_extract(CPUID_EXT_ISAR3, 12) > 1 || + (cpuid_feature_extract(CPUID_EXT_ISAR3, 12) == 1 && + cpuid_feature_extract(CPUID_EXT_ISAR3, 20) >= 3)) elf_hwcap &= ~HWCAP_SWP; } diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 023ac905e4c38c9858e5c644a374c343a0be334b..423663e23791e1349f877990b021f8371fe85c24 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -318,17 +318,6 @@ get_sigframe(struct ksignal *ksig, struct pt_regs *regs, int framesize) return frame; } -/* - * translate the signal - */ -static inline int map_sig(int sig) -{ - struct thread_info *thread = current_thread_info(); - if (sig < 32 && thread->exec_domain && thread->exec_domain->signal_invmap) - sig = thread->exec_domain->signal_invmap[sig]; - return sig; -} - static int setup_return(struct pt_regs *regs, struct ksignal *ksig, unsigned long __user *rc, void __user *frame) @@ -412,7 +401,7 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig, } } - regs->ARM_r0 = map_sig(ksig->sig); + regs->ARM_r0 = ksig->sig; regs->ARM_sp = (unsigned long)frame; regs->ARM_lr = retcode; regs->ARM_pc = handler; diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index e1e60e5a7a271eee56d34a69e55111b3ce0daf2d..7d37bfc508306b52a735f2de8d5c27d795bb6fa3 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -116,14 +116,7 @@ cpu_resume_after_mmu: ldmfd sp!, {r4 - r11, pc} ENDPROC(cpu_resume_after_mmu) -/* - * Note: Yes, part of the following code is located into the .data section. - * This is to allow sleep_save_sp to be accessed with a relative load - * while we can't rely on any MMU translation. We could have put - * sleep_save_sp in the .text section as well, but some setups might - * insist on it to be truly read-only. - */ - .data + .text .align ENTRY(cpu_resume) ARM_BE8(setend be) @ ensure we are in BE mode @@ -145,6 +138,8 @@ ARM_BE8(setend be) @ ensure we are in BE mode compute_mpidr_hash r1, r4, r5, r6, r0, r3 1: adr r0, _sleep_save_sp + ldr r2, [r0] + add r0, r0, r2 ldr r0, [r0, #SLEEP_SAVE_SP_PHYS] ldr r0, [r0, r1, lsl #2] @@ -156,10 +151,12 @@ THUMB( bx r3 ) ENDPROC(cpu_resume) .align 2 +_sleep_save_sp: + .long sleep_save_sp - . mpidr_hash_ptr: .long mpidr_hash - . @ mpidr_hash struct offset + .data .type sleep_save_sp, #object ENTRY(sleep_save_sp) -_sleep_save_sp: .space SLEEP_SAVE_SP_SZ @ struct sleep_save_sp diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 86ef244c5a24b4fa80b20da26c5d522832a61d59..cca5b87581855244deba92fc78f2f0ae02b2ad07 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -145,6 +145,11 @@ void __init smp_init_cpus(void) smp_ops.smp_init_cpus(); } +int platform_can_secondary_boot(void) +{ + return !!smp_ops.smp_boot_secondary; +} + int platform_can_cpu_hotplug(void) { #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index afdd51e30bec073fd1efc5c1b65e104c8c89ea2d..1361756782c73b49c499f50bc4f423647e2edd3f 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c @@ -42,7 +42,7 @@ " cmp %0, #0\n" \ " movne %0, %4\n" \ "2:\n" \ - " .section .fixup,\"ax\"\n" \ + " .section .text.fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, %5\n" \ " b 2b\n" \ diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 788e23fe64d8e5502f553464c8718a2bf00bf2cb..3dce1a342030d161b1a0ee5442c0c11c5ca06780 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -505,12 +505,10 @@ asmlinkage void bad_mode(struct pt_regs *regs, int reason) static int bad_syscall(int n, struct pt_regs *regs) { - struct thread_info *thread = current_thread_info(); siginfo_t info; - if ((current->personality & PER_MASK) != PER_LINUX && - thread->exec_domain->handler) { - thread->exec_domain->handler(n, regs); + if ((current->personality & PER_MASK) != PER_LINUX) { + send_sig(SIGSEGV, current, 1); return regs->ARM_r0; } diff --git a/arch/arm/kernel/vdso.c b/arch/arm/kernel/vdso.c new file mode 100644 index 0000000000000000000000000000000000000000..efe17dd9b9218b7ef16299700a0f2a6d74ca61c1 --- /dev/null +++ b/arch/arm/kernel/vdso.c @@ -0,0 +1,337 @@ +/* + * Adapted from arm64 version. + * + * Copyright (C) 2012 ARM Limited + * Copyright (C) 2015 Mentor Graphics Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX_SYMNAME 64 + +static struct page **vdso_text_pagelist; + +/* Total number of pages needed for the data and text portions of the VDSO. */ +unsigned int vdso_total_pages __read_mostly; + +/* + * The VDSO data page. + */ +static union vdso_data_store vdso_data_store __page_aligned_data; +static struct vdso_data *vdso_data = &vdso_data_store.data; + +static struct page *vdso_data_page; +static struct vm_special_mapping vdso_data_mapping = { + .name = "[vvar]", + .pages = &vdso_data_page, +}; + +static struct vm_special_mapping vdso_text_mapping = { + .name = "[vdso]", +}; + +struct elfinfo { + Elf32_Ehdr *hdr; /* ptr to ELF */ + Elf32_Sym *dynsym; /* ptr to .dynsym section */ + unsigned long dynsymsize; /* size of .dynsym section */ + char *dynstr; /* ptr to .dynstr section */ +}; + +/* Cached result of boot-time check for whether the arch timer exists, + * and if so, whether the virtual counter is useable. + */ +static bool cntvct_ok __read_mostly; + +static bool __init cntvct_functional(void) +{ + struct device_node *np; + bool ret = false; + + if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) + goto out; + + /* The arm_arch_timer core should export + * arch_timer_use_virtual or similar so we don't have to do + * this. + */ + np = of_find_compatible_node(NULL, NULL, "arm,armv7-timer"); + if (!np) + goto out_put; + + if (of_property_read_bool(np, "arm,cpu-registers-not-fw-configured")) + goto out_put; + + ret = true; + +out_put: + of_node_put(np); +out: + return ret; +} + +static void * __init find_section(Elf32_Ehdr *ehdr, const char *name, + unsigned long *size) +{ + Elf32_Shdr *sechdrs; + unsigned int i; + char *secnames; + + /* Grab section headers and strings so we can tell who is who */ + sechdrs = (void *)ehdr + ehdr->e_shoff; + secnames = (void *)ehdr + sechdrs[ehdr->e_shstrndx].sh_offset; + + /* Find the section they want */ + for (i = 1; i < ehdr->e_shnum; i++) { + if (strcmp(secnames + sechdrs[i].sh_name, name) == 0) { + if (size) + *size = sechdrs[i].sh_size; + return (void *)ehdr + sechdrs[i].sh_offset; + } + } + + if (size) + *size = 0; + return NULL; +} + +static Elf32_Sym * __init find_symbol(struct elfinfo *lib, const char *symname) +{ + unsigned int i; + + for (i = 0; i < (lib->dynsymsize / sizeof(Elf32_Sym)); i++) { + char name[MAX_SYMNAME], *c; + + if (lib->dynsym[i].st_name == 0) + continue; + strlcpy(name, lib->dynstr + lib->dynsym[i].st_name, + MAX_SYMNAME); + c = strchr(name, '@'); + if (c) + *c = 0; + if (strcmp(symname, name) == 0) + return &lib->dynsym[i]; + } + return NULL; +} + +static void __init vdso_nullpatch_one(struct elfinfo *lib, const char *symname) +{ + Elf32_Sym *sym; + + sym = find_symbol(lib, symname); + if (!sym) + return; + + sym->st_name = 0; +} + +static void __init patch_vdso(void *ehdr) +{ + struct elfinfo einfo; + + einfo = (struct elfinfo) { + .hdr = ehdr, + }; + + einfo.dynsym = find_section(einfo.hdr, ".dynsym", &einfo.dynsymsize); + einfo.dynstr = find_section(einfo.hdr, ".dynstr", NULL); + + /* If the virtual counter is absent or non-functional we don't + * want programs to incur the slight additional overhead of + * dispatching through the VDSO only to fall back to syscalls. + */ + if (!cntvct_ok) { + vdso_nullpatch_one(&einfo, "__vdso_gettimeofday"); + vdso_nullpatch_one(&einfo, "__vdso_clock_gettime"); + } +} + +static int __init vdso_init(void) +{ + unsigned int text_pages; + int i; + + if (memcmp(&vdso_start, "\177ELF", 4)) { + pr_err("VDSO is not a valid ELF object!\n"); + return -ENOEXEC; + } + + text_pages = (&vdso_end - &vdso_start) >> PAGE_SHIFT; + pr_debug("vdso: %i text pages at base %p\n", text_pages, &vdso_start); + + /* Allocate the VDSO text pagelist */ + vdso_text_pagelist = kcalloc(text_pages, sizeof(struct page *), + GFP_KERNEL); + if (vdso_text_pagelist == NULL) + return -ENOMEM; + + /* Grab the VDSO data page. */ + vdso_data_page = virt_to_page(vdso_data); + + /* Grab the VDSO text pages. */ + for (i = 0; i < text_pages; i++) { + struct page *page; + + page = virt_to_page(&vdso_start + i * PAGE_SIZE); + vdso_text_pagelist[i] = page; + } + + vdso_text_mapping.pages = vdso_text_pagelist; + + vdso_total_pages = 1; /* for the data/vvar page */ + vdso_total_pages += text_pages; + + cntvct_ok = cntvct_functional(); + + patch_vdso(&vdso_start); + + return 0; +} +arch_initcall(vdso_init); + +static int install_vvar(struct mm_struct *mm, unsigned long addr) +{ + struct vm_area_struct *vma; + + vma = _install_special_mapping(mm, addr, PAGE_SIZE, + VM_READ | VM_MAYREAD, + &vdso_data_mapping); + + return IS_ERR(vma) ? PTR_ERR(vma) : 0; +} + +/* assumes mmap_sem is write-locked */ +void arm_install_vdso(struct mm_struct *mm, unsigned long addr) +{ + struct vm_area_struct *vma; + unsigned long len; + + mm->context.vdso = 0; + + if (vdso_text_pagelist == NULL) + return; + + if (install_vvar(mm, addr)) + return; + + /* Account for vvar page. */ + addr += PAGE_SIZE; + len = (vdso_total_pages - 1) << PAGE_SHIFT; + + vma = _install_special_mapping(mm, addr, len, + VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC, + &vdso_text_mapping); + + if (!IS_ERR(vma)) + mm->context.vdso = addr; +} + +static void vdso_write_begin(struct vdso_data *vdata) +{ + ++vdso_data->seq_count; + smp_wmb(); /* Pairs with smp_rmb in vdso_read_retry */ +} + +static void vdso_write_end(struct vdso_data *vdata) +{ + smp_wmb(); /* Pairs with smp_rmb in vdso_read_begin */ + ++vdso_data->seq_count; +} + +static bool tk_is_cntvct(const struct timekeeper *tk) +{ + if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) + return false; + + if (strcmp(tk->tkr_mono.clock->name, "arch_sys_counter") != 0) + return false; + + return true; +} + +/** + * update_vsyscall - update the vdso data page + * + * Increment the sequence counter, making it odd, indicating to + * userspace that an update is in progress. Update the fields used + * for coarse clocks and, if the architected system timer is in use, + * the fields used for high precision clocks. Increment the sequence + * counter again, making it even, indicating to userspace that the + * update is finished. + * + * Userspace is expected to sample seq_count before reading any other + * fields from the data page. If seq_count is odd, userspace is + * expected to wait until it becomes even. After copying data from + * the page, userspace must sample seq_count again; if it has changed + * from its previous value, userspace must retry the whole sequence. + * + * Calls to update_vsyscall are serialized by the timekeeping core. + */ +void update_vsyscall(struct timekeeper *tk) +{ + struct timespec xtime_coarse; + struct timespec64 *wtm = &tk->wall_to_monotonic; + + if (!cntvct_ok) { + /* The entry points have been zeroed, so there is no + * point in updating the data page. + */ + return; + } + + vdso_write_begin(vdso_data); + + xtime_coarse = __current_kernel_time(); + vdso_data->tk_is_cntvct = tk_is_cntvct(tk); + vdso_data->xtime_coarse_sec = xtime_coarse.tv_sec; + vdso_data->xtime_coarse_nsec = xtime_coarse.tv_nsec; + vdso_data->wtm_clock_sec = wtm->tv_sec; + vdso_data->wtm_clock_nsec = wtm->tv_nsec; + + if (vdso_data->tk_is_cntvct) { + vdso_data->cs_cycle_last = tk->tkr_mono.cycle_last; + vdso_data->xtime_clock_sec = tk->xtime_sec; + vdso_data->xtime_clock_snsec = tk->tkr_mono.xtime_nsec; + vdso_data->cs_mult = tk->tkr_mono.mult; + vdso_data->cs_shift = tk->tkr_mono.shift; + vdso_data->cs_mask = tk->tkr_mono.mask; + } + + vdso_write_end(vdso_data); + + flush_dcache_page(virt_to_page(vdso_data)); +} + +void update_vsyscall_tz(void) +{ + vdso_data->tz_minuteswest = sys_tz.tz_minuteswest; + vdso_data->tz_dsttime = sys_tz.tz_dsttime; + flush_dcache_page(virt_to_page(vdso_data)); +} diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index b31aa73e80765539ce14018a1ed2fdc0a1a81ddc..8b60fde5ce48a628e5d1f2c682d2aa0684ed6642 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -11,7 +11,7 @@ #ifdef CONFIG_ARM_KERNMEM_PERMS #include #endif - + #define PROC_INFO \ . = ALIGN(4); \ VMLINUX_SYMBOL(__proc_info_begin) = .; \ @@ -23,7 +23,7 @@ VMLINUX_SYMBOL(__idmap_text_start) = .; \ *(.idmap.text) \ VMLINUX_SYMBOL(__idmap_text_end) = .; \ - . = ALIGN(32); \ + . = ALIGN(PAGE_SIZE); \ VMLINUX_SYMBOL(__hyp_idmap_text_start) = .; \ *(.hyp.idmap.text) \ VMLINUX_SYMBOL(__hyp_idmap_text_end) = .; @@ -74,7 +74,7 @@ SECTIONS ARM_EXIT_DISCARD(EXIT_DATA) EXIT_CALL #ifndef CONFIG_MMU - *(.fixup) + *(.text.fixup) *(__ex_table) #endif #ifndef CONFIG_SMP_ON_UP @@ -100,6 +100,7 @@ SECTIONS .text : { /* Real text segment */ _stext = .; /* Text and read-only data */ + IDMAP_TEXT __exception_text_start = .; *(.exception.text) __exception_text_end = .; @@ -108,10 +109,6 @@ SECTIONS SCHED_TEXT LOCK_TEXT KPROBES_TEXT - IDMAP_TEXT -#ifdef CONFIG_MMU - *(.fixup) -#endif *(.gnu.warning) *(.glue_7) *(.glue_7t) @@ -346,8 +343,11 @@ SECTIONS */ ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support") ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined") + /* - * The HYP init code can't be more than a page long. + * The HYP init code can't be more than a page long, + * and should not cross a page boundary. * The above comment applies as well. */ -ASSERT(((__hyp_idmap_text_end - __hyp_idmap_text_start) <= PAGE_SIZE), "HYP init code too big") +ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE, + "HYP init code too big or misaligned") diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 6f536451ab784e99966a308c0892e8614214591f..d9631ecddd56ea09a9b9f922520e2e05576c974a 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -671,8 +671,7 @@ int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level, if (!irqchip_in_kernel(kvm)) return -ENXIO; - if (irq_num < VGIC_NR_PRIVATE_IRQS || - irq_num > KVM_ARM_IRQ_GIC_MAX) + if (irq_num < VGIC_NR_PRIVATE_IRQS) return -EINVAL; return kvm_vgic_inject_irq(kvm, 0, irq_num, level); diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 15b050d46fc968afdc53029ada4b7d945ee23515..1d5accbd3dcf2ae771e7ba9475c8607846a05a0d 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -35,9 +35,9 @@ extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[]; static pgd_t *boot_hyp_pgd; static pgd_t *hyp_pgd; +static pgd_t *merged_hyp_pgd; static DEFINE_MUTEX(kvm_hyp_pgd_mutex); -static void *init_bounce_page; static unsigned long hyp_idmap_start; static unsigned long hyp_idmap_end; static phys_addr_t hyp_idmap_vector; @@ -405,9 +405,6 @@ void free_boot_hyp_pgd(void) if (hyp_pgd) unmap_range(NULL, hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); - free_page((unsigned long)init_bounce_page); - init_bounce_page = NULL; - mutex_unlock(&kvm_hyp_pgd_mutex); } @@ -438,6 +435,11 @@ void free_hyp_pgds(void) free_pages((unsigned long)hyp_pgd, hyp_pgd_order); hyp_pgd = NULL; } + if (merged_hyp_pgd) { + clear_page(merged_hyp_pgd); + free_page((unsigned long)merged_hyp_pgd); + merged_hyp_pgd = NULL; + } mutex_unlock(&kvm_hyp_pgd_mutex); } @@ -1622,12 +1624,18 @@ void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu) phys_addr_t kvm_mmu_get_httbr(void) { - return virt_to_phys(hyp_pgd); + if (__kvm_cpu_uses_extended_idmap()) + return virt_to_phys(merged_hyp_pgd); + else + return virt_to_phys(hyp_pgd); } phys_addr_t kvm_mmu_get_boot_httbr(void) { - return virt_to_phys(boot_hyp_pgd); + if (__kvm_cpu_uses_extended_idmap()) + return virt_to_phys(merged_hyp_pgd); + else + return virt_to_phys(boot_hyp_pgd); } phys_addr_t kvm_get_idmap_vector(void) @@ -1643,39 +1651,11 @@ int kvm_mmu_init(void) hyp_idmap_end = kvm_virt_to_phys(__hyp_idmap_text_end); hyp_idmap_vector = kvm_virt_to_phys(__kvm_hyp_init); - if ((hyp_idmap_start ^ hyp_idmap_end) & PAGE_MASK) { - /* - * Our init code is crossing a page boundary. Allocate - * a bounce page, copy the code over and use that. - */ - size_t len = __hyp_idmap_text_end - __hyp_idmap_text_start; - phys_addr_t phys_base; - - init_bounce_page = (void *)__get_free_page(GFP_KERNEL); - if (!init_bounce_page) { - kvm_err("Couldn't allocate HYP init bounce page\n"); - err = -ENOMEM; - goto out; - } - - memcpy(init_bounce_page, __hyp_idmap_text_start, len); - /* - * Warning: the code we just copied to the bounce page - * must be flushed to the point of coherency. - * Otherwise, the data may be sitting in L2, and HYP - * mode won't be able to observe it as it runs with - * caches off at that point. - */ - kvm_flush_dcache_to_poc(init_bounce_page, len); - - phys_base = kvm_virt_to_phys(init_bounce_page); - hyp_idmap_vector += phys_base - hyp_idmap_start; - hyp_idmap_start = phys_base; - hyp_idmap_end = phys_base + len; - - kvm_info("Using HYP init bounce page @%lx\n", - (unsigned long)phys_base); - } + /* + * We rely on the linker script to ensure at build time that the HYP + * init code does not cross a page boundary. + */ + BUG_ON((hyp_idmap_start ^ (hyp_idmap_end - 1)) & PAGE_MASK); hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, hyp_pgd_order); boot_hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, hyp_pgd_order); @@ -1698,6 +1678,17 @@ int kvm_mmu_init(void) goto out; } + if (__kvm_cpu_uses_extended_idmap()) { + merged_hyp_pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO); + if (!merged_hyp_pgd) { + kvm_err("Failed to allocate extra HYP pgd\n"); + goto out; + } + __kvm_extend_hypmap(boot_hyp_pgd, hyp_pgd, merged_hyp_pgd, + hyp_idmap_start); + return 0; + } + /* Map the very same page at the trampoline VA */ err = __create_hyp_mappings(boot_hyp_pgd, TRAMPOLINE_VA, TRAMPOLINE_VA + PAGE_SIZE, diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S index 14a0d988c82cb41ab88acd4d924bf75aa87efce3..1710fd7db2d57d35ed342417336980f987db5985 100644 --- a/arch/arm/lib/clear_user.S +++ b/arch/arm/lib/clear_user.S @@ -47,7 +47,7 @@ USER( strnebt r2, [r0]) ENDPROC(__clear_user) ENDPROC(__clear_user_std) - .pushsection .fixup,"ax" + .pushsection .text.fixup,"ax" .align 0 9001: ldmfd sp!, {r0, pc} .popsection diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S index a9d3db16ecb5738234dc14defe8a4d2f21f60fef..9648b0675a3efc81dd412fa5b3be820c1a3d6242 100644 --- a/arch/arm/lib/copy_to_user.S +++ b/arch/arm/lib/copy_to_user.S @@ -100,7 +100,7 @@ WEAK(__copy_to_user) ENDPROC(__copy_to_user) ENDPROC(__copy_to_user_std) - .pushsection .fixup,"ax" + .pushsection .text.fixup,"ax" .align 0 copy_abort_preamble ldmfd sp!, {r1, r2, r3} diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S index 7d08b43d2c0e496fc704378301b82d3b34d93f3a..1d0957e61f898ab6ab43759496e85c8b247218d1 100644 --- a/arch/arm/lib/csumpartialcopyuser.S +++ b/arch/arm/lib/csumpartialcopyuser.S @@ -68,7 +68,7 @@ * so properly, we would have to add in whatever registers were loaded before * the fault, which, with the current asm above is not predictable. */ - .pushsection .fixup,"ax" + .pushsection .text.fixup,"ax" .align 4 9001: mov r4, #-EFAULT ldr r5, [sp, #8*4] @ *err_ptr diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index 312d43eb686a0254543258efdc3185c340bde82c..8044591dca729b74f805094e1f5a39f8deb153f8 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -83,6 +83,12 @@ void __init register_current_timer_delay(const struct delay_timer *timer) NSEC_PER_SEC, 3600); res = cyc_to_ns(1ULL, new_mult, new_shift); + if (res > 1000) { + pr_err("Ignoring delay timer %ps, which has insufficient resolution of %lluns\n", + timer, res); + return; + } + if (!delay_calibrated && (!delay_res || (res < delay_res))) { pr_info("Switching to timer-based delay loop, resolution %lluns\n", res); delay_timer = timer; diff --git a/arch/arm/mach-alpine/Kconfig b/arch/arm/mach-alpine/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..2c44b930505a27d49bfe743f9ede46e8cbe7dfe5 --- /dev/null +++ b/arch/arm/mach-alpine/Kconfig @@ -0,0 +1,12 @@ +config ARCH_ALPINE + bool "Annapurna Labs Alpine platform" if ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select GENERIC_IRQ_CHIP + select HAVE_ARM_ARCH_TIMER + select HAVE_SMP + select MFD_SYSCON + select PCI + select PCI_HOST_GENERIC + help + This enables support for the Annapurna Labs Alpine V1 boards. diff --git a/arch/arm/mach-alpine/Makefile b/arch/arm/mach-alpine/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..b6674890be7134823d2d63b88dc50698fed0daf2 --- /dev/null +++ b/arch/arm/mach-alpine/Makefile @@ -0,0 +1,2 @@ +obj-y += alpine_machine.o +obj-$(CONFIG_SMP) += platsmp.o alpine_cpu_pm.o diff --git a/arch/arm/mach-alpine/alpine_cpu_pm.c b/arch/arm/mach-alpine/alpine_cpu_pm.c new file mode 100644 index 0000000000000000000000000000000000000000..121c77c4b53c3a48c36abea3694f85ff956eaac7 --- /dev/null +++ b/arch/arm/mach-alpine/alpine_cpu_pm.c @@ -0,0 +1,70 @@ +/* + * Low-level power-management support for Alpine platform. + * + * Copyright (C) 2015 Annapurna Labs Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include + +#include "alpine_cpu_pm.h" +#include "alpine_cpu_resume.h" + +/* NB registers */ +#define AL_SYSFAB_POWER_CONTROL(cpu) (0x2000 + (cpu)*0x100 + 0x20) + +static struct regmap *al_sysfabric; +static struct al_cpu_resume_regs __iomem *al_cpu_resume_regs; +static int wakeup_supported; + +int alpine_cpu_wakeup(unsigned int phys_cpu, uint32_t phys_resume_addr) +{ + if (!wakeup_supported) + return -ENOSYS; + + /* + * Set CPU resume address - + * secure firmware running on boot will jump to this address + * after setting proper CPU mode, and initialiing e.g. secure + * regs (the same mode all CPUs are booted to - usually HYP) + */ + writel(phys_resume_addr, + &al_cpu_resume_regs->per_cpu[phys_cpu].resume_addr); + + /* Power-up the CPU */ + regmap_write(al_sysfabric, AL_SYSFAB_POWER_CONTROL(phys_cpu), 0); + + return 0; +} + +void __init alpine_cpu_pm_init(void) +{ + struct device_node *np; + uint32_t watermark; + + al_sysfabric = syscon_regmap_lookup_by_compatible("al,alpine-sysfabric-service"); + + np = of_find_compatible_node(NULL, NULL, "al,alpine-cpu-resume"); + al_cpu_resume_regs = of_iomap(np, 0); + + wakeup_supported = !IS_ERR(al_sysfabric) && al_cpu_resume_regs; + + if (wakeup_supported) { + watermark = readl(&al_cpu_resume_regs->watermark); + wakeup_supported = (watermark & AL_CPU_RESUME_MAGIC_NUM_MASK) + == AL_CPU_RESUME_MAGIC_NUM; + } +} diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-alpine/alpine_cpu_pm.h similarity index 55% rename from arch/arm/mach-at91/include/mach/io.h rename to arch/arm/mach-alpine/alpine_cpu_pm.h index 2d9ca0455745524d50ec1417ec0d36596b05bea9..5179e697c492fea36b9e62f60a162209239cd368 100644 --- a/arch/arm/mach-at91/include/mach/io.h +++ b/arch/arm/mach-alpine/alpine_cpu_pm.h @@ -1,7 +1,7 @@ /* - * arch/arm/mach-at91/include/mach/io.h + * Low-level power-management support for Alpine platform. * - * Copyright (C) 2003 SAN People + * Copyright (C) 2015 Annapurna Labs Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -12,16 +12,15 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H +#ifndef __ALPINE_CPU_PM_H__ +#define __ALPINE_CPU_PM_H__ + +/* Alpine CPU Power Management Services Initialization */ +void alpine_cpu_pm_init(void); -#define IO_SPACE_LIMIT 0xFFFFFFFF -#define __io(a) __typesafe_io(a) +/* Wake-up a CPU */ +int alpine_cpu_wakeup(unsigned int phys_cpu, uint32_t phys_resume_addr); -#endif +#endif /* __ALPINE_CPU_PM_H__ */ diff --git a/arch/arm/mach-alpine/alpine_cpu_resume.h b/arch/arm/mach-alpine/alpine_cpu_resume.h new file mode 100644 index 0000000000000000000000000000000000000000..c80150c0d2d84a838f36fd927575af6241f17ab8 --- /dev/null +++ b/arch/arm/mach-alpine/alpine_cpu_resume.h @@ -0,0 +1,38 @@ +/* + * Annapurna labs cpu-resume register structure. + * + * Copyright (C) 2015 Annapurna Labs Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ALPINE_CPU_RESUME_H_ +#define ALPINE_CPU_RESUME_H_ + +/* Per-cpu regs */ +struct al_cpu_resume_regs_per_cpu { + uint32_t flags; + uint32_t resume_addr; +}; + +/* general regs */ +struct al_cpu_resume_regs { + /* Watermark for validating the CPU resume struct */ + uint32_t watermark; + uint32_t flags; + struct al_cpu_resume_regs_per_cpu per_cpu[]; +}; + +/* The expected magic number for validating the resume addresses */ +#define AL_CPU_RESUME_MAGIC_NUM 0xf0e1d200 +#define AL_CPU_RESUME_MAGIC_NUM_MASK 0xffffff00 + +#endif /* ALPINE_CPU_RESUME_H_ */ diff --git a/arch/powerpc/platforms/cell/beat_interrupt.h b/arch/arm/mach-alpine/alpine_machine.c similarity index 50% rename from arch/powerpc/platforms/cell/beat_interrupt.h rename to arch/arm/mach-alpine/alpine_machine.c index a7e52f91a078fe55a5686e10d1f79c24c46086be..b8e2145e962b21309c092a813553815aeafedd40 100644 --- a/arch/powerpc/platforms/cell/beat_interrupt.h +++ b/arch/arm/mach-alpine/alpine_machine.c @@ -1,7 +1,7 @@ /* - * Celleb/Beat Interrupt controller + * Machine declaration for Alpine platforms. * - * (C) Copyright 2006 TOSHIBA CORPORATION + * Copyright (C) 2015 Annapurna Labs Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -12,19 +12,17 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ -#ifndef ASM_BEAT_PIC_H -#define ASM_BEAT_PIC_H -#ifdef __KERNEL__ +#include + +#include -extern void beatic_init_IRQ(void); -extern unsigned int beatic_get_irq(void); -extern void beatic_deinit_IRQ(void); +static const char * const al_match[] __initconst = { + "al,alpine", + NULL, +}; -#endif -#endif /* ASM_BEAT_PIC_H */ +DT_MACHINE_START(AL_DT, "Annapurna Labs Alpine") + .dt_compat = al_match, +MACHINE_END diff --git a/arch/arm/mach-alpine/platsmp.c b/arch/arm/mach-alpine/platsmp.c new file mode 100644 index 0000000000000000000000000000000000000000..f78429f48bd6527ce8d833dc2707e55c57c71be0 --- /dev/null +++ b/arch/arm/mach-alpine/platsmp.c @@ -0,0 +1,49 @@ +/* + * SMP operations for Alpine platform. + * + * Copyright (C) 2015 Annapurna Labs Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include + +#include + +#include "alpine_cpu_pm.h" + +static int alpine_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + phys_addr_t addr; + + addr = virt_to_phys(secondary_startup); + + if (addr > (phys_addr_t)(uint32_t)(-1)) { + pr_err("FAIL: resume address over 32bit (%pa)", &addr); + return -EINVAL; + } + + return alpine_cpu_wakeup(cpu_logical_map(cpu), (uint32_t)addr); +} + +static void __init alpine_smp_prepare_cpus(unsigned int max_cpus) +{ + alpine_cpu_pm_init(); +} + +static struct smp_operations alpine_smp_ops __initdata = { + .smp_prepare_cpus = alpine_smp_prepare_cpus, + .smp_boot_secondary = alpine_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(alpine_smp, "al,alpine-smp", &alpine_smp_ops); diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index c74a44324e5bc3dc7cb4b5e0f31e64ca8c167f5f..fd95f34945f4826610ac810180456687abbb71bf 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -1,55 +1,15 @@ -if ARCH_AT91 - -config HAVE_AT91_UTMI - bool - -config HAVE_AT91_USB_CLK - bool - -config COMMON_CLK_AT91 - bool - select COMMON_CLK - -config HAVE_AT91_SMD - bool - -config HAVE_AT91_H32MX - bool - -config SOC_SAMA5 - bool - select ATMEL_AIC5_IRQ +menuconfig ARCH_AT91 + bool "Atmel SoCs" + depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB select COMMON_CLK_AT91 - select CPU_V7 - select GENERIC_CLOCKEVENTS - select MEMORY - select ATMEL_SDRAMC - select PHYLIB if NETDEVICES - -menu "Atmel AT91 System-on-Chip" - -choice - - prompt "Core type" - -config SOC_SAM_V4_V5 - bool "ARM9 AT91SAM9/AT91RM9200" - help - Select this if you are using one of Atmel's AT91SAM9 or - AT91RM9200 SoC. - -config SOC_SAM_V7 - bool "Cortex A5" - help - Select this if you are using one of Atmel's SAMA5D3 SoC. - -endchoice + select PINCTRL + select PINCTRL_AT91 + select SOC_BUS -comment "Atmel AT91 Processor" - -if SOC_SAM_V7 +if ARCH_AT91 config SOC_SAMA5D3 - bool "SAMA5D3 family" + bool "SAMA5D3 family" if ARCH_MULTI_V7 select SOC_SAMA5 select HAVE_FB_ATMEL select HAVE_AT91_UTMI @@ -60,9 +20,8 @@ config SOC_SAMA5D3 This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36. config SOC_SAMA5D4 - bool "SAMA5D4 family" + bool "SAMA5D4 family" if ARCH_MULTI_V7 select SOC_SAMA5 - select CLKSRC_MMIO select CACHE_L2X0 select HAVE_FB_ATMEL select HAVE_AT91_UTMI @@ -71,29 +30,31 @@ config SOC_SAMA5D4 select HAVE_AT91_H32MX help Select this if you are using one of Atmel's SAMA5D4 family SoC. -endif -if SOC_SAM_V4_V5 config SOC_AT91RM9200 - bool "AT91RM9200" + bool "AT91RM9200" if ARCH_MULTI_V4T select ATMEL_AIC_IRQ - select COMMON_CLK_AT91 + select ATMEL_ST select CPU_ARM920T - select GENERIC_CLOCKEVENTS select HAVE_AT91_USB_CLK + select MIGHT_HAVE_PCI + select SOC_SAM_V4_V5 + select SRAM if PM + help + Select this if you are using Atmel's AT91RM9200 SoC. config SOC_AT91SAM9 - bool "AT91SAM9" + bool "AT91SAM9" if ARCH_MULTI_V5 select ATMEL_AIC_IRQ select ATMEL_SDRAMC - select COMMON_CLK_AT91 select CPU_ARM926T - select GENERIC_CLOCKEVENTS select HAVE_AT91_SMD select HAVE_AT91_USB_CLK select HAVE_AT91_UTMI select HAVE_FB_ATMEL select MEMORY + select SOC_SAM_V4_V5 + select SRAM if PM help Select this if you are using one of those Atmel SoC: AT91SAM9260 @@ -112,40 +73,35 @@ config SOC_AT91SAM9 AT91SAM9X25 AT91SAM9X35 AT91SAM9XE -endif # SOC_SAM_V4_V5 -comment "AT91 Feature Selections" +config HAVE_AT91_UTMI + bool -config AT91_SLOW_CLOCK - bool "Suspend-to-RAM disables main oscillator" - select SRAM - depends on SUSPEND - help - Select this if you want Suspend-to-RAM to save the most power - possible (without powering off the CPU) by disabling the PLLs - and main oscillator so that only the 32 KiHz clock is available. +config HAVE_AT91_USB_CLK + bool - When only that slow-clock is available, some peripherals lose - functionality. Many can't issue wakeup events unless faster - clocks are available. Some lose their operating state and - need to be completely re-initialized. +config COMMON_CLK_AT91 + bool + select COMMON_CLK -config AT91_TIMER_HZ - int "Kernel HZ (jiffies per second)" - range 32 1024 - depends on ARCH_AT91 - default "128" if SOC_AT91RM9200 - default "100" - help - On AT91rm9200 chips where you're using a system clock derived - from the 32768 Hz hardware clock, this tick rate should divide - it exactly: use a power-of-two value, such as 128 or 256, to - reduce timing errors caused by rounding. +config HAVE_AT91_SMD + bool + +config HAVE_AT91_H32MX + bool - On AT91sam926x chips, or otherwise when using a higher precision - system clock (of at least several MHz), rounding is less of a - problem so it can be safer to use a decimal values like 100. +config SOC_SAM_V4_V5 + bool -endmenu +config SOC_SAM_V7 + bool + +config SOC_SAMA5 + bool + select ATMEL_AIC5_IRQ + select ATMEL_SDRAMC + select MEMORY + select SOC_SAM_V7 + select SRAM if PM endif diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 827fdbcce1c7a69c1a8372db97c99e90e3019452..4fa8b4541e64fa06836c29863a574233a97227c8 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -1,20 +1,25 @@ # # Makefile for the linux kernel. # +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include +asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -obj-y := setup.o +obj-y := soc.o obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o # CPU-specific support -obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o at91rm9200_time.o +obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o obj-$(CONFIG_SOC_AT91SAM9) += at91sam9.o obj-$(CONFIG_SOC_SAMA5) += sama5.o # Power Management obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o +obj-$(CONFIG_PM) += pm_suspend.o +ifeq ($(CONFIG_CPU_V7),y) +AFLAGS_pm_suspend.o := -march=armv7-a +endif ifeq ($(CONFIG_PM_DEBUG),y) CFLAGS_pm.o += -DDEBUG endif diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 8fcfb70f712456e66a26e871dc6f524546980913..eaf58f88ef5dcd262a862e96b0656b03a31cf8b3 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -8,60 +8,42 @@ * Licensed under GPLv2 or later. */ -#include -#include -#include -#include +#include #include -#include #include -#include -#include -#include #include -#include -#include #include -#include - #include "generic.h" +#include "soc.h" -static void at91rm9200_restart(enum reboot_mode reboot_mode, const char *cmd) -{ - /* - * Perform a hardware reset with the use of the Watchdog timer. - */ - at91_st_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1); - at91_st_write(AT91_ST_CR, AT91_ST_WDRST); -} - -static void __init at91rm9200_dt_timer_init(void) -{ - of_clk_init(NULL); - at91rm9200_timer_init(); -} +static const struct at91_soc rm9200_socs[] = { + AT91_SOC(AT91RM9200_CIDR_MATCH, 0, "at91rm9200 BGA", "at91rm9200"), + { /* sentinel */ }, +}; static void __init at91rm9200_dt_device_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + struct soc_device *soc; + struct device *soc_dev = NULL; + + soc = at91_soc_init(rm9200_socs); + if (soc != NULL) + soc_dev = soc_device_to_device(soc); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); arm_pm_idle = at91rm9200_idle; - arm_pm_restart = at91rm9200_restart; at91rm9200_pm_init(); } - - static const char *at91rm9200_dt_board_compat[] __initconst = { "atmel,at91rm9200", NULL }; DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200") - .init_time = at91rm9200_dt_timer_init, - .map_io = at91_map_io, .init_machine = at91rm9200_dt_device_init, .dt_compat = at91rm9200_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c index 56e3ba73ec407727eb0c2746b2f88c9edbe4b39a..e47a2093a0e723a1ef477dfc9954798f130b00f7 100644 --- a/arch/arm/mach-at91/at91sam9.c +++ b/arch/arm/mach-at91/at91sam9.c @@ -7,29 +7,68 @@ * Licensed under GPLv2 or later. */ -#include -#include -#include -#include #include -#include #include -#include -#include -#include -#include #include -#include -#include +#include #include "generic.h" +#include "soc.h" -static void __init at91sam9_dt_device_init(void) +static const struct at91_soc at91sam9_socs[] = { + AT91_SOC(AT91SAM9260_CIDR_MATCH, 0, "at91sam9260", NULL), + AT91_SOC(AT91SAM9261_CIDR_MATCH, 0, "at91sam9261", NULL), + AT91_SOC(AT91SAM9263_CIDR_MATCH, 0, "at91sam9263", NULL), + AT91_SOC(AT91SAM9G20_CIDR_MATCH, 0, "at91sam9g20", NULL), + AT91_SOC(AT91SAM9RL64_CIDR_MATCH, 0, "at91sam9rl64", NULL), + AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M11_EXID_MATCH, + "at91sam9m11", "at91sam9g45"), + AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M10_EXID_MATCH, + "at91sam9m10", "at91sam9g45"), + AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G46_EXID_MATCH, + "at91sam9g46", "at91sam9g45"), + AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G45_EXID_MATCH, + "at91sam9g45", "at91sam9g45"), + AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G15_EXID_MATCH, + "at91sam9g15", "at91sam9x5"), + AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G35_EXID_MATCH, + "at91sam9g35", "at91sam9x5"), + AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X35_EXID_MATCH, + "at91sam9x35", "at91sam9x5"), + AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G25_EXID_MATCH, + "at91sam9g25", "at91sam9x5"), + AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X25_EXID_MATCH, + "at91sam9x25", "at91sam9x5"), + AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN12_EXID_MATCH, + "at91sam9cn12", "at91sam9n12"), + AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9N12_EXID_MATCH, + "at91sam9n12", "at91sam9n12"), + AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN11_EXID_MATCH, + "at91sam9cn11", "at91sam9n12"), + AT91_SOC(AT91SAM9XE128_CIDR_MATCH, 0, "at91sam9xe128", "at91sam9xe128"), + AT91_SOC(AT91SAM9XE256_CIDR_MATCH, 0, "at91sam9xe256", "at91sam9xe256"), + AT91_SOC(AT91SAM9XE512_CIDR_MATCH, 0, "at91sam9xe512", "at91sam9xe512"), + { /* sentinel */ }, +}; + +static void __init at91sam9_common_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + struct soc_device *soc; + struct device *soc_dev = NULL; + + soc = at91_soc_init(at91sam9_socs); + if (soc != NULL) + soc_dev = soc_device_to_device(soc); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); arm_pm_idle = at91sam9_idle; +} + +static void __init at91sam9_dt_device_init(void) +{ + at91sam9_common_init(); at91sam9260_pm_init(); } @@ -40,16 +79,13 @@ static const char *at91_dt_board_compat[] __initconst = { DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9") /* Maintainer: Atmel */ - .map_io = at91_map_io, .init_machine = at91sam9_dt_device_init, .dt_compat = at91_dt_board_compat, MACHINE_END static void __init at91sam9g45_dt_device_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - - arm_pm_idle = at91sam9_idle; + at91sam9_common_init(); at91sam9g45_pm_init(); } @@ -60,16 +96,13 @@ static const char *at91sam9g45_board_compat[] __initconst = { DT_MACHINE_START(at91sam9g45_dt, "Atmel AT91SAM9G45") /* Maintainer: Atmel */ - .map_io = at91_map_io, .init_machine = at91sam9g45_dt_device_init, .dt_compat = at91sam9g45_board_compat, MACHINE_END static void __init at91sam9x5_dt_device_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - - arm_pm_idle = at91sam9_idle; + at91sam9_common_init(); at91sam9x5_pm_init(); } @@ -81,7 +114,6 @@ static const char *at91sam9x5_board_compat[] __initconst = { DT_MACHINE_START(at91sam9x5_dt, "Atmel AT91SAM9") /* Maintainer: Atmel */ - .map_io = at91_map_io, .init_machine = at91sam9x5_dt_device_init, .dt_compat = at91sam9x5_board_compat, MACHINE_END diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 583369ffc284d5588b4c7f4c742cedbefb7614f3..b0fa7dc7286d9dc120a79c77be70fe0adb365910 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -18,17 +18,10 @@ extern void __init at91_map_io(void); extern void __init at91_alt_map_io(void); - /* Timer */ -extern void at91rm9200_timer_init(void); - /* idle */ extern void at91rm9200_idle(void); extern void at91sam9_idle(void); -/* Matrix */ -extern void at91_ioremap_matrix(u32 base_addr); - - #ifdef CONFIG_PM extern void __init at91rm9200_pm_init(void); extern void __init at91sam9260_pm_init(void); diff --git a/arch/arm/mach-at91/include/mach/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h deleted file mode 100644 index 42925e8f78e4b2774724bd091019b0dd2909e648..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/at91_dbgu.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_dbgu.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Debug Unit (DBGU) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_DBGU_H -#define AT91_DBGU_H - -#define AT91_DBGU_CR (0x00) /* Control Register */ -#define AT91_DBGU_MR (0x04) /* Mode Register */ -#define AT91_DBGU_IER (0x08) /* Interrupt Enable Register */ -#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */ -#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */ -#define AT91_DBGU_IDR (0x0c) /* Interrupt Disable Register */ -#define AT91_DBGU_IMR (0x10) /* Interrupt Mask Register */ -#define AT91_DBGU_SR (0x14) /* Status Register */ -#define AT91_DBGU_RHR (0x18) /* Receiver Holding Register */ -#define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */ -#define AT91_DBGU_BRGR (0x20) /* Baud Rate Generator Register */ - -#define AT91_DBGU_CIDR (0x40) /* Chip ID Register */ -#define AT91_DBGU_EXID (0x44) /* Chip ID Extension Register */ -#define AT91_DBGU_FNR (0x48) /* Force NTRST Register [SAM9 only] */ -#define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */ - -/* - * Some AT91 parts that don't have full DEBUG units still support the ID - * and extensions register. - */ -#define AT91_CIDR_VERSION (0x1f << 0) /* Version of the Device */ -#define AT91_CIDR_EPROC (7 << 5) /* Embedded Processor */ -#define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */ -#define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */ -#define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */ -#define AT91_CIDR_SRAMSIZ_1K (1 << 16) -#define AT91_CIDR_SRAMSIZ_2K (2 << 16) -#define AT91_CIDR_SRAMSIZ_112K (4 << 16) -#define AT91_CIDR_SRAMSIZ_4K (5 << 16) -#define AT91_CIDR_SRAMSIZ_80K (6 << 16) -#define AT91_CIDR_SRAMSIZ_160K (7 << 16) -#define AT91_CIDR_SRAMSIZ_8K (8 << 16) -#define AT91_CIDR_SRAMSIZ_16K (9 << 16) -#define AT91_CIDR_SRAMSIZ_32K (10 << 16) -#define AT91_CIDR_SRAMSIZ_64K (11 << 16) -#define AT91_CIDR_SRAMSIZ_128K (12 << 16) -#define AT91_CIDR_SRAMSIZ_256K (13 << 16) -#define AT91_CIDR_SRAMSIZ_96K (14 << 16) -#define AT91_CIDR_SRAMSIZ_512K (15 << 16) -#define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */ -#define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */ -#define AT91_CIDR_EXT (1 << 31) /* Extension Flag */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91_matrix.h b/arch/arm/mach-at91/include/mach/at91_matrix.h deleted file mode 100644 index f8996c954131b1bdf88b75958b6d80527b4070a6..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/at91_matrix.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD - * - * Under GPLv2 - */ - -#ifndef __MACH_AT91_MATRIX_H__ -#define __MACH_AT91_MATRIX_H__ - -#ifndef __ASSEMBLY__ -extern void __iomem *at91_matrix_base; - -#define at91_matrix_read(field) \ - __raw_readl(at91_matrix_base + field) - -#define at91_matrix_write(field, value) \ - __raw_writel(value, at91_matrix_base + field) - -#else -.extern at91_matrix_base -#endif - -#endif /* __MACH_AT91_MATRIX_H__ */ diff --git a/arch/arm/mach-at91/include/mach/at91_ramc.h b/arch/arm/mach-at91/include/mach/at91_ramc.h index e4492b151fee6b80b5bd9ec238d796e80437577a..493bc486e85834c0f6c37e82b772b833f95ffbb3 100644 --- a/arch/arm/mach-at91/include/mach/at91_ramc.h +++ b/arch/arm/mach-at91/include/mach/at91_ramc.h @@ -21,10 +21,6 @@ extern void __iomem *at91_ramc_base[]; .extern at91_ramc_base #endif -#define AT91_MEMCTRL_MC 0 -#define AT91_MEMCTRL_SDRAMC 1 -#define AT91_MEMCTRL_DDRSDR 2 - #include #include #include diff --git a/arch/arm/mach-at91/include/mach/at91_st.h b/arch/arm/mach-at91/include/mach/at91_st.h deleted file mode 100644 index 67fdbd13c3ed67db9ec426630ed4bb7e1b50bdb1..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/at91_st.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_st.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * System Timer (ST) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_ST_H -#define AT91_ST_H - -#ifndef __ASSEMBLY__ -extern void __iomem *at91_st_base; - -#define at91_st_read(field) \ - __raw_readl(at91_st_base + field) - -#define at91_st_write(field, value) \ - __raw_writel(value, at91_st_base + field) -#else -.extern at91_st_base -#endif - -#define AT91_ST_CR 0x00 /* Control Register */ -#define AT91_ST_WDRST (1 << 0) /* Watchdog Timer Restart */ - -#define AT91_ST_PIMR 0x04 /* Period Interval Mode Register */ -#define AT91_ST_PIV (0xffff << 0) /* Period Interval Value */ - -#define AT91_ST_WDMR 0x08 /* Watchdog Mode Register */ -#define AT91_ST_WDV (0xffff << 0) /* Watchdog Counter Value */ -#define AT91_ST_RSTEN (1 << 16) /* Reset Enable */ -#define AT91_ST_EXTEN (1 << 17) /* External Signal Assertion Enable */ - -#define AT91_ST_RTMR 0x0c /* Real-time Mode Register */ -#define AT91_ST_RTPRES (0xffff << 0) /* Real-time Prescalar Value */ - -#define AT91_ST_SR 0x10 /* Status Register */ -#define AT91_ST_PITS (1 << 0) /* Period Interval Timer Status */ -#define AT91_ST_WDOVF (1 << 1) /* Watchdog Overflow */ -#define AT91_ST_RTTINC (1 << 2) /* Real-time Timer Increment */ -#define AT91_ST_ALMS (1 << 3) /* Alarm Status */ - -#define AT91_ST_IER 0x14 /* Interrupt Enable Register */ -#define AT91_ST_IDR 0x18 /* Interrupt Disable Register */ -#define AT91_ST_IMR 0x1c /* Interrupt Mask Register */ - -#define AT91_ST_RTAR 0x20 /* Real-time Alarm Register */ -#define AT91_ST_ALMV (0xfffff << 0) /* Alarm Value */ - -#define AT91_ST_CRTR 0x24 /* Current Real-time Register */ -#define AT91_ST_CRTV (0xfffff << 0) /* Current Real-Time Value */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h deleted file mode 100644 index e67317c677617bd0374446e4646922eb60792ce6..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/at91rm9200.h +++ /dev/null @@ -1,103 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91rm9200.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Common definitions. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91RM9200_H -#define AT91RM9200_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT91RM9200_ID_PIOD 5 /* Parallel IO Controller D */ -#define AT91RM9200_ID_US0 6 /* USART 0 */ -#define AT91RM9200_ID_US1 7 /* USART 1 */ -#define AT91RM9200_ID_US2 8 /* USART 2 */ -#define AT91RM9200_ID_US3 9 /* USART 3 */ -#define AT91RM9200_ID_MCI 10 /* Multimedia Card Interface */ -#define AT91RM9200_ID_UDP 11 /* USB Device Port */ -#define AT91RM9200_ID_TWI 12 /* Two-Wire Interface */ -#define AT91RM9200_ID_SPI 13 /* Serial Peripheral Interface */ -#define AT91RM9200_ID_SSC0 14 /* Serial Synchronous Controller 0 */ -#define AT91RM9200_ID_SSC1 15 /* Serial Synchronous Controller 1 */ -#define AT91RM9200_ID_SSC2 16 /* Serial Synchronous Controller 2 */ -#define AT91RM9200_ID_TC0 17 /* Timer Counter 0 */ -#define AT91RM9200_ID_TC1 18 /* Timer Counter 1 */ -#define AT91RM9200_ID_TC2 19 /* Timer Counter 2 */ -#define AT91RM9200_ID_TC3 20 /* Timer Counter 3 */ -#define AT91RM9200_ID_TC4 21 /* Timer Counter 4 */ -#define AT91RM9200_ID_TC5 22 /* Timer Counter 5 */ -#define AT91RM9200_ID_UHP 23 /* USB Host port */ -#define AT91RM9200_ID_EMAC 24 /* Ethernet MAC */ -#define AT91RM9200_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91RM9200_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */ -#define AT91RM9200_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */ -#define AT91RM9200_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */ -#define AT91RM9200_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */ -#define AT91RM9200_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */ -#define AT91RM9200_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */ - - -/* - * Peripheral physical base addresses. - */ -#define AT91RM9200_BASE_TCB0 0xfffa0000 -#define AT91RM9200_BASE_TC0 0xfffa0000 -#define AT91RM9200_BASE_TC1 0xfffa0040 -#define AT91RM9200_BASE_TC2 0xfffa0080 -#define AT91RM9200_BASE_TCB1 0xfffa4000 -#define AT91RM9200_BASE_TC3 0xfffa4000 -#define AT91RM9200_BASE_TC4 0xfffa4040 -#define AT91RM9200_BASE_TC5 0xfffa4080 -#define AT91RM9200_BASE_UDP 0xfffb0000 -#define AT91RM9200_BASE_MCI 0xfffb4000 -#define AT91RM9200_BASE_TWI 0xfffb8000 -#define AT91RM9200_BASE_EMAC 0xfffbc000 -#define AT91RM9200_BASE_US0 0xfffc0000 -#define AT91RM9200_BASE_US1 0xfffc4000 -#define AT91RM9200_BASE_US2 0xfffc8000 -#define AT91RM9200_BASE_US3 0xfffcc000 -#define AT91RM9200_BASE_SSC0 0xfffd0000 -#define AT91RM9200_BASE_SSC1 0xfffd4000 -#define AT91RM9200_BASE_SSC2 0xfffd8000 -#define AT91RM9200_BASE_SPI 0xfffe0000 - - -/* - * System Peripherals - */ -#define AT91RM9200_BASE_DBGU AT91_BASE_DBGU0 /* Debug Unit */ -#define AT91RM9200_BASE_PIOA 0xfffff400 /* PIO Controller A */ -#define AT91RM9200_BASE_PIOB 0xfffff600 /* PIO Controller B */ -#define AT91RM9200_BASE_PIOC 0xfffff800 /* PIO Controller C */ -#define AT91RM9200_BASE_PIOD 0xfffffa00 /* PIO Controller D */ -#define AT91RM9200_BASE_ST 0xfffffd00 /* System Timer */ -#define AT91RM9200_BASE_RTC 0xfffffe00 /* Real-Time Clock */ -#define AT91RM9200_BASE_MC 0xffffff00 /* Memory Controllers */ - -/* - * Internal Memory. - */ -#define AT91RM9200_ROM_BASE 0x00100000 /* Internal ROM base address */ -#define AT91RM9200_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */ - -#define AT91RM9200_SRAM_BASE 0x00200000 /* Internal SRAM base address */ -#define AT91RM9200_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */ - -#define AT91RM9200_UHP_BASE 0x00300000 /* USB Host controller */ - - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h deleted file mode 100644 index 416c7b6c56d3af85cf34eef90078de512047dbfa..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ /dev/null @@ -1,129 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9260.h - * - * (C) 2006 Andrew Victor - * - * Common definitions. - * Based on AT91SAM9260 datasheet revision A (Preliminary). - * - * Includes also definitions for AT91SAM9XE and AT91SAM9G families - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9260_H -#define AT91SAM9260_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91SAM9260_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91SAM9260_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91SAM9260_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT91SAM9260_ID_ADC 5 /* Analog-to-Digital Converter */ -#define AT91SAM9260_ID_US0 6 /* USART 0 */ -#define AT91SAM9260_ID_US1 7 /* USART 1 */ -#define AT91SAM9260_ID_US2 8 /* USART 2 */ -#define AT91SAM9260_ID_MCI 9 /* Multimedia Card Interface */ -#define AT91SAM9260_ID_UDP 10 /* USB Device Port */ -#define AT91SAM9260_ID_TWI 11 /* Two-Wire Interface */ -#define AT91SAM9260_ID_SPI0 12 /* Serial Peripheral Interface 0 */ -#define AT91SAM9260_ID_SPI1 13 /* Serial Peripheral Interface 1 */ -#define AT91SAM9260_ID_SSC 14 /* Serial Synchronous Controller */ -#define AT91SAM9260_ID_TC0 17 /* Timer Counter 0 */ -#define AT91SAM9260_ID_TC1 18 /* Timer Counter 1 */ -#define AT91SAM9260_ID_TC2 19 /* Timer Counter 2 */ -#define AT91SAM9260_ID_UHP 20 /* USB Host port */ -#define AT91SAM9260_ID_EMAC 21 /* Ethernet */ -#define AT91SAM9260_ID_ISI 22 /* Image Sensor Interface */ -#define AT91SAM9260_ID_US3 23 /* USART 3 */ -#define AT91SAM9260_ID_US4 24 /* USART 4 */ -#define AT91SAM9260_ID_US5 25 /* USART 5 */ -#define AT91SAM9260_ID_TC3 26 /* Timer Counter 3 */ -#define AT91SAM9260_ID_TC4 27 /* Timer Counter 4 */ -#define AT91SAM9260_ID_TC5 28 /* Timer Counter 5 */ -#define AT91SAM9260_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91SAM9260_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */ -#define AT91SAM9260_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */ - - -/* - * User Peripheral physical base addresses. - */ -#define AT91SAM9260_BASE_TCB0 0xfffa0000 -#define AT91SAM9260_BASE_TC0 0xfffa0000 -#define AT91SAM9260_BASE_TC1 0xfffa0040 -#define AT91SAM9260_BASE_TC2 0xfffa0080 -#define AT91SAM9260_BASE_UDP 0xfffa4000 -#define AT91SAM9260_BASE_MCI 0xfffa8000 -#define AT91SAM9260_BASE_TWI 0xfffac000 -#define AT91SAM9260_BASE_US0 0xfffb0000 -#define AT91SAM9260_BASE_US1 0xfffb4000 -#define AT91SAM9260_BASE_US2 0xfffb8000 -#define AT91SAM9260_BASE_SSC 0xfffbc000 -#define AT91SAM9260_BASE_ISI 0xfffc0000 -#define AT91SAM9260_BASE_EMAC 0xfffc4000 -#define AT91SAM9260_BASE_SPI0 0xfffc8000 -#define AT91SAM9260_BASE_SPI1 0xfffcc000 -#define AT91SAM9260_BASE_US3 0xfffd0000 -#define AT91SAM9260_BASE_US4 0xfffd4000 -#define AT91SAM9260_BASE_US5 0xfffd8000 -#define AT91SAM9260_BASE_TCB1 0xfffdc000 -#define AT91SAM9260_BASE_TC3 0xfffdc000 -#define AT91SAM9260_BASE_TC4 0xfffdc040 -#define AT91SAM9260_BASE_TC5 0xfffdc080 -#define AT91SAM9260_BASE_ADC 0xfffe0000 - -/* - * System Peripherals - */ -#define AT91SAM9260_BASE_ECC 0xffffe800 -#define AT91SAM9260_BASE_SDRAMC 0xffffea00 -#define AT91SAM9260_BASE_SMC 0xffffec00 -#define AT91SAM9260_BASE_MATRIX 0xffffee00 -#define AT91SAM9260_BASE_DBGU AT91_BASE_DBGU0 -#define AT91SAM9260_BASE_PIOA 0xfffff400 -#define AT91SAM9260_BASE_PIOB 0xfffff600 -#define AT91SAM9260_BASE_PIOC 0xfffff800 -#define AT91SAM9260_BASE_RSTC 0xfffffd00 -#define AT91SAM9260_BASE_SHDWC 0xfffffd10 -#define AT91SAM9260_BASE_RTT 0xfffffd20 -#define AT91SAM9260_BASE_PIT 0xfffffd30 -#define AT91SAM9260_BASE_WDT 0xfffffd40 -#define AT91SAM9260_BASE_GPBR 0xfffffd50 - - -/* - * Internal Memory. - */ -#define AT91SAM9260_ROM_BASE 0x00100000 /* Internal ROM base address */ -#define AT91SAM9260_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ - -#define AT91SAM9260_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */ -#define AT91SAM9260_SRAM0_SIZE SZ_4K /* Internal SRAM 0 size (4Kb) */ -#define AT91SAM9260_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */ -#define AT91SAM9260_SRAM1_SIZE SZ_4K /* Internal SRAM 1 size (4Kb) */ -#define AT91SAM9260_SRAM_BASE 0x002FF000 /* Internal SRAM base address */ -#define AT91SAM9260_SRAM_SIZE SZ_8K /* Internal SRAM size (8Kb) */ - -#define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */ - -#define AT91SAM9XE_FLASH_BASE 0x00200000 /* Internal FLASH base address */ -#define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */ - -#define AT91SAM9G20_ROM_BASE 0x00100000 /* Internal ROM base address */ -#define AT91SAM9G20_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ - -#define AT91SAM9G20_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */ -#define AT91SAM9G20_SRAM0_SIZE SZ_16K /* Internal SRAM 0 size (16Kb) */ -#define AT91SAM9G20_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */ -#define AT91SAM9G20_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */ -#define AT91SAM9G20_SRAM_BASE 0x002FC000 /* Internal SRAM base address */ -#define AT91SAM9G20_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */ - -#define AT91SAM9G20_UHP_BASE 0x00500000 /* USB Host controller */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h deleted file mode 100644 index f459df4206291fbecd2b8d190170454b607a57ee..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9260_matrix.h - * - * Copyright (C) 2007 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9260 datasheet revision B. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9260_MATRIX_H -#define AT91SAM9260_MATRIX_H - -#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ - -#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ - -#define AT91_MATRIX_EBICSA 0x11C /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16) - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h deleted file mode 100644 index a041406d06ee1e0fba30451f3925ed657ec7f315..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9261.h - * - * Copyright (C) SAN People - * - * Common definitions. - * Based on AT91SAM9261 datasheet revision E. (Preliminary) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9261_H -#define AT91SAM9261_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT91SAM9261_ID_US0 6 /* USART 0 */ -#define AT91SAM9261_ID_US1 7 /* USART 1 */ -#define AT91SAM9261_ID_US2 8 /* USART 2 */ -#define AT91SAM9261_ID_MCI 9 /* Multimedia Card Interface */ -#define AT91SAM9261_ID_UDP 10 /* USB Device Port */ -#define AT91SAM9261_ID_TWI 11 /* Two-Wire Interface */ -#define AT91SAM9261_ID_SPI0 12 /* Serial Peripheral Interface 0 */ -#define AT91SAM9261_ID_SPI1 13 /* Serial Peripheral Interface 1 */ -#define AT91SAM9261_ID_SSC0 14 /* Serial Synchronous Controller 0 */ -#define AT91SAM9261_ID_SSC1 15 /* Serial Synchronous Controller 1 */ -#define AT91SAM9261_ID_SSC2 16 /* Serial Synchronous Controller 2 */ -#define AT91SAM9261_ID_TC0 17 /* Timer Counter 0 */ -#define AT91SAM9261_ID_TC1 18 /* Timer Counter 1 */ -#define AT91SAM9261_ID_TC2 19 /* Timer Counter 2 */ -#define AT91SAM9261_ID_UHP 20 /* USB Host port */ -#define AT91SAM9261_ID_LCDC 21 /* LDC Controller */ -#define AT91SAM9261_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91SAM9261_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */ -#define AT91SAM9261_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */ - - -/* - * User Peripheral physical base addresses. - */ -#define AT91SAM9261_BASE_TCB0 0xfffa0000 -#define AT91SAM9261_BASE_TC0 0xfffa0000 -#define AT91SAM9261_BASE_TC1 0xfffa0040 -#define AT91SAM9261_BASE_TC2 0xfffa0080 -#define AT91SAM9261_BASE_UDP 0xfffa4000 -#define AT91SAM9261_BASE_MCI 0xfffa8000 -#define AT91SAM9261_BASE_TWI 0xfffac000 -#define AT91SAM9261_BASE_US0 0xfffb0000 -#define AT91SAM9261_BASE_US1 0xfffb4000 -#define AT91SAM9261_BASE_US2 0xfffb8000 -#define AT91SAM9261_BASE_SSC0 0xfffbc000 -#define AT91SAM9261_BASE_SSC1 0xfffc0000 -#define AT91SAM9261_BASE_SSC2 0xfffc4000 -#define AT91SAM9261_BASE_SPI0 0xfffc8000 -#define AT91SAM9261_BASE_SPI1 0xfffcc000 - - -/* - * System Peripherals - */ -#define AT91SAM9261_BASE_SMC 0xffffec00 -#define AT91SAM9261_BASE_MATRIX 0xffffee00 -#define AT91SAM9261_BASE_SDRAMC 0xffffea00 -#define AT91SAM9261_BASE_DBGU AT91_BASE_DBGU0 -#define AT91SAM9261_BASE_PIOA 0xfffff400 -#define AT91SAM9261_BASE_PIOB 0xfffff600 -#define AT91SAM9261_BASE_PIOC 0xfffff800 -#define AT91SAM9261_BASE_RSTC 0xfffffd00 -#define AT91SAM9261_BASE_SHDWC 0xfffffd10 -#define AT91SAM9261_BASE_RTT 0xfffffd20 -#define AT91SAM9261_BASE_PIT 0xfffffd30 -#define AT91SAM9261_BASE_WDT 0xfffffd40 -#define AT91SAM9261_BASE_GPBR 0xfffffd50 - - -/* - * Internal Memory. - */ -#define AT91SAM9261_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -#define AT91SAM9261_SRAM_SIZE 0x00028000 /* Internal SRAM size (160Kb) */ - -#define AT91SAM9G10_SRAM_BASE AT91SAM9261_SRAM_BASE /* Internal SRAM base address */ -#define AT91SAM9G10_SRAM_SIZE 0x00004000 /* Internal SRAM size (16Kb) */ - -#define AT91SAM9261_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91SAM9261_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ - -#define AT91SAM9261_UHP_BASE 0x00500000 /* USB Host controller */ -#define AT91SAM9261_LCDC_BASE 0x00600000 /* LDC controller */ - - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h deleted file mode 100644 index a50cdf8b8ca49c753f1b332450f63cba443e5b2d..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9261_matrix.h - * - * Copyright (C) 2007 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9261_MATRIX_H -#define AT91SAM9261_MATRIX_H - -#define AT91_MATRIX_MCFG 0x00 /* Master Configuration Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ - -#define AT91_MATRIX_SCFG0 0x04 /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 0x08 /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 0x0C /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 0x10 /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 0x14 /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ - -#define AT91_MATRIX_TCR 0x24 /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_ITCM_64 (7 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) -#define AT91_MATRIX_DTCM_64 (7 << 4) - -#define AT91_MATRIX_EBICSA 0x30 /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ - -#define AT91_MATRIX_USBPUCR 0x34 /* USB Pad Pull-Up Control Register */ -#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h deleted file mode 100644 index d201029d60b386d9de9cefca0f4b03958aaab36d..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9263.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9263.h - * - * (C) 2007 Atmel Corporation. - * - * Common definitions. - * Based on AT91SAM9263 datasheet revision B (Preliminary). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9263_H -#define AT91SAM9263_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */ -#define AT91SAM9263_ID_US0 7 /* USART 0 */ -#define AT91SAM9263_ID_US1 8 /* USART 1 */ -#define AT91SAM9263_ID_US2 9 /* USART 2 */ -#define AT91SAM9263_ID_MCI0 10 /* Multimedia Card Interface 0 */ -#define AT91SAM9263_ID_MCI1 11 /* Multimedia Card Interface 1 */ -#define AT91SAM9263_ID_CAN 12 /* CAN */ -#define AT91SAM9263_ID_TWI 13 /* Two-Wire Interface */ -#define AT91SAM9263_ID_SPI0 14 /* Serial Peripheral Interface 0 */ -#define AT91SAM9263_ID_SPI1 15 /* Serial Peripheral Interface 1 */ -#define AT91SAM9263_ID_SSC0 16 /* Serial Synchronous Controller 0 */ -#define AT91SAM9263_ID_SSC1 17 /* Serial Synchronous Controller 1 */ -#define AT91SAM9263_ID_AC97C 18 /* AC97 Controller */ -#define AT91SAM9263_ID_TCB 19 /* Timer Counter 0, 1 and 2 */ -#define AT91SAM9263_ID_PWMC 20 /* Pulse Width Modulation Controller */ -#define AT91SAM9263_ID_EMAC 21 /* Ethernet */ -#define AT91SAM9263_ID_2DGE 23 /* 2D Graphic Engine */ -#define AT91SAM9263_ID_UDP 24 /* USB Device Port */ -#define AT91SAM9263_ID_ISI 25 /* Image Sensor Interface */ -#define AT91SAM9263_ID_LCDC 26 /* LCD Controller */ -#define AT91SAM9263_ID_DMA 27 /* DMA Controller */ -#define AT91SAM9263_ID_UHP 29 /* USB Host port */ -#define AT91SAM9263_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91SAM9263_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */ - - -/* - * User Peripheral physical base addresses. - */ -#define AT91SAM9263_BASE_UDP 0xfff78000 -#define AT91SAM9263_BASE_TCB0 0xfff7c000 -#define AT91SAM9263_BASE_TC0 0xfff7c000 -#define AT91SAM9263_BASE_TC1 0xfff7c040 -#define AT91SAM9263_BASE_TC2 0xfff7c080 -#define AT91SAM9263_BASE_MCI0 0xfff80000 -#define AT91SAM9263_BASE_MCI1 0xfff84000 -#define AT91SAM9263_BASE_TWI 0xfff88000 -#define AT91SAM9263_BASE_US0 0xfff8c000 -#define AT91SAM9263_BASE_US1 0xfff90000 -#define AT91SAM9263_BASE_US2 0xfff94000 -#define AT91SAM9263_BASE_SSC0 0xfff98000 -#define AT91SAM9263_BASE_SSC1 0xfff9c000 -#define AT91SAM9263_BASE_AC97C 0xfffa0000 -#define AT91SAM9263_BASE_SPI0 0xfffa4000 -#define AT91SAM9263_BASE_SPI1 0xfffa8000 -#define AT91SAM9263_BASE_CAN 0xfffac000 -#define AT91SAM9263_BASE_PWMC 0xfffb8000 -#define AT91SAM9263_BASE_EMAC 0xfffbc000 -#define AT91SAM9263_BASE_ISI 0xfffc4000 -#define AT91SAM9263_BASE_2DGE 0xfffc8000 - -/* - * System Peripherals - */ -#define AT91SAM9263_BASE_ECC0 0xffffe000 -#define AT91SAM9263_BASE_SDRAMC0 0xffffe200 -#define AT91SAM9263_BASE_SMC0 0xffffe400 -#define AT91SAM9263_BASE_ECC1 0xffffe600 -#define AT91SAM9263_BASE_SDRAMC1 0xffffe800 -#define AT91SAM9263_BASE_SMC1 0xffffea00 -#define AT91SAM9263_BASE_MATRIX 0xffffec00 -#define AT91SAM9263_BASE_DBGU AT91_BASE_DBGU1 -#define AT91SAM9263_BASE_PIOA 0xfffff200 -#define AT91SAM9263_BASE_PIOB 0xfffff400 -#define AT91SAM9263_BASE_PIOC 0xfffff600 -#define AT91SAM9263_BASE_PIOD 0xfffff800 -#define AT91SAM9263_BASE_PIOE 0xfffffa00 -#define AT91SAM9263_BASE_RSTC 0xfffffd00 -#define AT91SAM9263_BASE_SHDWC 0xfffffd10 -#define AT91SAM9263_BASE_RTT0 0xfffffd20 -#define AT91SAM9263_BASE_PIT 0xfffffd30 -#define AT91SAM9263_BASE_WDT 0xfffffd40 -#define AT91SAM9263_BASE_RTT1 0xfffffd50 -#define AT91SAM9263_BASE_GPBR 0xfffffd60 - -#define AT91_SMC AT91_SMC0 - -/* - * Internal Memory. - */ -#define AT91SAM9263_SRAM0_BASE 0x00300000 /* Internal SRAM 0 base address */ -#define AT91SAM9263_SRAM0_SIZE (80 * SZ_1K) /* Internal SRAM 0 size (80Kb) */ - -#define AT91SAM9263_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91SAM9263_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */ - -#define AT91SAM9263_SRAM1_BASE 0x00500000 /* Internal SRAM 1 base address */ -#define AT91SAM9263_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */ - -#define AT91SAM9263_LCDC_BASE 0x00700000 /* LCD Controller */ -#define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */ -#define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */ - - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h deleted file mode 100644 index ebb5fdb565e0c71a9164429608913bdfce736544..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h +++ /dev/null @@ -1,129 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9263_matrix.h - * - * Copyright (C) 2006 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9263 datasheet revision B (Preliminary). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9263_MATRIX_H -#define AT91SAM9263_MATRIX_H - -#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 0x18 /* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 0x1C /* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 0x20 /* Master Configuration Register 8 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 0x58 /* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 0x5C /* Slave Configuration Register 7 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 0x84 /* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 0x8C /* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 0x94 /* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 0x9C /* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 0xA4 /* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 0xAC /* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 0xB0 /* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 0xB4 /* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 0xB8 /* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 0xBC /* Priority Register B for Slave 7 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ -#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ -#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ - -#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) -#define AT91_MATRIX_RCB6 (1 << 6) -#define AT91_MATRIX_RCB7 (1 << 7) -#define AT91_MATRIX_RCB8 (1 << 8) - -#define AT91_MATRIX_TCMR 0x114 /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) - -#define AT91_MATRIX_EBI0CSA 0x120 /* EBI0 Chip Select Assignment Register */ -#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4) -#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5) -#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16) - -#define AT91_MATRIX_EBI1CSA 0x124 /* EBI1 Chip Select Assignment Register */ -#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3) -#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16) - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h index 175e1fdd9fe8ade33846f2ff42441d61053bc928..ff54a0ce90e39d7c494c421068008260e862ebb7 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9_smc.h +++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h @@ -16,8 +16,6 @@ #ifndef AT91SAM9_SMC_H #define AT91SAM9_SMC_H -#include - #ifndef __ASSEMBLY__ struct sam9_smc_config { /* Setup register */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h deleted file mode 100644 index 8eba1021f533ac9f87ad45da184b1301c3d98f40..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Chip-specific header file for the AT91SAM9G45 family - * - * Copyright (C) 2008-2009 Atmel Corporation. - * - * Common definitions. - * Based on AT91SAM9G45 preliminary datasheet. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9G45_H -#define AT91SAM9G45_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91SAM9G45_ID_PIOA 2 /* Parallel I/O Controller A */ -#define AT91SAM9G45_ID_PIOB 3 /* Parallel I/O Controller B */ -#define AT91SAM9G45_ID_PIOC 4 /* Parallel I/O Controller C */ -#define AT91SAM9G45_ID_PIODE 5 /* Parallel I/O Controller D and E */ -#define AT91SAM9G45_ID_TRNG 6 /* True Random Number Generator */ -#define AT91SAM9G45_ID_US0 7 /* USART 0 */ -#define AT91SAM9G45_ID_US1 8 /* USART 1 */ -#define AT91SAM9G45_ID_US2 9 /* USART 2 */ -#define AT91SAM9G45_ID_US3 10 /* USART 3 */ -#define AT91SAM9G45_ID_MCI0 11 /* High Speed Multimedia Card Interface 0 */ -#define AT91SAM9G45_ID_TWI0 12 /* Two-Wire Interface 0 */ -#define AT91SAM9G45_ID_TWI1 13 /* Two-Wire Interface 1 */ -#define AT91SAM9G45_ID_SPI0 14 /* Serial Peripheral Interface 0 */ -#define AT91SAM9G45_ID_SPI1 15 /* Serial Peripheral Interface 1 */ -#define AT91SAM9G45_ID_SSC0 16 /* Synchronous Serial Controller 0 */ -#define AT91SAM9G45_ID_SSC1 17 /* Synchronous Serial Controller 1 */ -#define AT91SAM9G45_ID_TCB 18 /* Timer Counter 0, 1, 2, 3, 4 and 5 */ -#define AT91SAM9G45_ID_PWMC 19 /* Pulse Width Modulation Controller */ -#define AT91SAM9G45_ID_TSC 20 /* Touch Screen ADC Controller */ -#define AT91SAM9G45_ID_DMA 21 /* DMA Controller */ -#define AT91SAM9G45_ID_UHPHS 22 /* USB Host High Speed */ -#define AT91SAM9G45_ID_LCDC 23 /* LCD Controller */ -#define AT91SAM9G45_ID_AC97C 24 /* AC97 Controller */ -#define AT91SAM9G45_ID_EMAC 25 /* Ethernet MAC */ -#define AT91SAM9G45_ID_ISI 26 /* Image Sensor Interface */ -#define AT91SAM9G45_ID_UDPHS 27 /* USB Device High Speed */ -#define AT91SAM9G45_ID_AESTDESSHA 28 /* AES + T-DES + SHA */ -#define AT91SAM9G45_ID_MCI1 29 /* High Speed Multimedia Card Interface 1 */ -#define AT91SAM9G45_ID_VDEC 30 /* Video Decoder */ -#define AT91SAM9G45_ID_IRQ0 31 /* Advanced Interrupt Controller */ - -/* - * User Peripheral physical base addresses. - */ -#define AT91SAM9G45_BASE_UDPHS 0xfff78000 -#define AT91SAM9G45_BASE_TCB0 0xfff7c000 -#define AT91SAM9G45_BASE_TC0 0xfff7c000 -#define AT91SAM9G45_BASE_TC1 0xfff7c040 -#define AT91SAM9G45_BASE_TC2 0xfff7c080 -#define AT91SAM9G45_BASE_MCI0 0xfff80000 -#define AT91SAM9G45_BASE_TWI0 0xfff84000 -#define AT91SAM9G45_BASE_TWI1 0xfff88000 -#define AT91SAM9G45_BASE_US0 0xfff8c000 -#define AT91SAM9G45_BASE_US1 0xfff90000 -#define AT91SAM9G45_BASE_US2 0xfff94000 -#define AT91SAM9G45_BASE_US3 0xfff98000 -#define AT91SAM9G45_BASE_SSC0 0xfff9c000 -#define AT91SAM9G45_BASE_SSC1 0xfffa0000 -#define AT91SAM9G45_BASE_SPI0 0xfffa4000 -#define AT91SAM9G45_BASE_SPI1 0xfffa8000 -#define AT91SAM9G45_BASE_AC97C 0xfffac000 -#define AT91SAM9G45_BASE_TSC 0xfffb0000 -#define AT91SAM9G45_BASE_ISI 0xfffb4000 -#define AT91SAM9G45_BASE_PWMC 0xfffb8000 -#define AT91SAM9G45_BASE_EMAC 0xfffbc000 -#define AT91SAM9G45_BASE_AES 0xfffc0000 -#define AT91SAM9G45_BASE_TDES 0xfffc4000 -#define AT91SAM9G45_BASE_SHA 0xfffc8000 -#define AT91SAM9G45_BASE_TRNG 0xfffcc000 -#define AT91SAM9G45_BASE_MCI1 0xfffd0000 -#define AT91SAM9G45_BASE_TCB1 0xfffd4000 -#define AT91SAM9G45_BASE_TC3 0xfffd4000 -#define AT91SAM9G45_BASE_TC4 0xfffd4040 -#define AT91SAM9G45_BASE_TC5 0xfffd4080 - -/* - * System Peripherals - */ -#define AT91SAM9G45_BASE_ECC 0xffffe200 -#define AT91SAM9G45_BASE_DDRSDRC1 0xffffe400 -#define AT91SAM9G45_BASE_DDRSDRC0 0xffffe600 -#define AT91SAM9G45_BASE_DMA 0xffffec00 -#define AT91SAM9G45_BASE_SMC 0xffffe800 -#define AT91SAM9G45_BASE_MATRIX 0xffffea00 -#define AT91SAM9G45_BASE_DBGU AT91_BASE_DBGU1 -#define AT91SAM9G45_BASE_PIOA 0xfffff200 -#define AT91SAM9G45_BASE_PIOB 0xfffff400 -#define AT91SAM9G45_BASE_PIOC 0xfffff600 -#define AT91SAM9G45_BASE_PIOD 0xfffff800 -#define AT91SAM9G45_BASE_PIOE 0xfffffa00 -#define AT91SAM9G45_BASE_RSTC 0xfffffd00 -#define AT91SAM9G45_BASE_SHDWC 0xfffffd10 -#define AT91SAM9G45_BASE_RTT 0xfffffd20 -#define AT91SAM9G45_BASE_PIT 0xfffffd30 -#define AT91SAM9G45_BASE_WDT 0xfffffd40 -#define AT91SAM9G45_BASE_RTC 0xfffffdb0 -#define AT91SAM9G45_BASE_GPBR 0xfffffd60 - -/* - * Internal Memory. - */ -#define AT91SAM9G45_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -#define AT91SAM9G45_SRAM_SIZE SZ_64K /* Internal SRAM size (64Kb) */ - -#define AT91SAM9G45_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91SAM9G45_ROM_SIZE SZ_64K /* Internal ROM size (64Kb) */ - -#define AT91SAM9G45_LCDC_BASE 0x00500000 /* LCD Controller */ -#define AT91SAM9G45_UDPHS_FIFO 0x00600000 /* USB Device HS controller */ -#define AT91SAM9G45_OHCI_BASE 0x00700000 /* USB Host controller (OHCI) */ -#define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */ -#define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */ - -/* - * DMA peripheral identifiers - * for hardware handshaking interface - */ -#define AT_DMA_ID_MCI0 0 -#define AT_DMA_ID_SPI0_TX 1 -#define AT_DMA_ID_SPI0_RX 2 -#define AT_DMA_ID_SPI1_TX 3 -#define AT_DMA_ID_SPI1_RX 4 -#define AT_DMA_ID_SSC0_TX 5 -#define AT_DMA_ID_SSC0_RX 6 -#define AT_DMA_ID_SSC1_TX 7 -#define AT_DMA_ID_SSC1_RX 8 -#define AT_DMA_ID_AC97_TX 9 -#define AT_DMA_ID_AC97_RX 10 -#define AT_DMA_ID_AES_TX 11 -#define AT_DMA_ID_AES_RX 12 -#define AT_DMA_ID_MCI1 13 - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h deleted file mode 100644 index b76e2ed2fbc2263f7a18ee3e07e9521bea2f4c48..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h +++ /dev/null @@ -1,153 +0,0 @@ -/* - * Matrix-centric header file for the AT91SAM9G45 family - * - * Copyright (C) 2008-2009 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9G45 preliminary datasheet. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9G45_MATRIX_H -#define AT91SAM9G45_MATRIX_H - -#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 0x18 /* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 0x1C /* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 0x20 /* Master Configuration Register 8 */ -#define AT91_MATRIX_MCFG9 0x24 /* Master Configuration Register 9 */ -#define AT91_MATRIX_MCFG10 0x28 /* Master Configuration Register 10 */ -#define AT91_MATRIX_MCFG11 0x2C /* Master Configuration Register 11 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) -#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0) -#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0) -#define AT91_MATRIX_ULBT_128 (7 << 0) - -#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 0x58 /* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 0x5C /* Slave Configuration Register 7 */ -#define AT91_MATRIX_SLOT_CYCLE (0x1ff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ - -#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 0x84 /* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 0x8C /* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 0x94 /* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 0x9C /* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 0xA4 /* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 0xAC /* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 0xB0 /* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 0xB4 /* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 0xB8 /* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 0xBC /* Priority Register B for Slave 7 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ -#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ -#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ -#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */ -#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ -#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ - -#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) -#define AT91_MATRIX_RCB6 (1 << 6) -#define AT91_MATRIX_RCB7 (1 << 7) -#define AT91_MATRIX_RCB8 (1 << 8) -#define AT91_MATRIX_RCB9 (1 << 9) -#define AT91_MATRIX_RCB10 (1 << 10) -#define AT91_MATRIX_RCB11 (1 << 11) - -#define AT91_MATRIX_TCMR 0x110 /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) -#define AT91_MATRIX_DTCM_64 (7 << 4) -#define AT91_MATRIX_TCM_NWS (0x1 << 11) /* Wait state TCM register */ -#define AT91_MATRIX_TCM_NO_WS (0x0 << 11) -#define AT91_MATRIX_TCM_ONE_WS (0x1 << 11) - -#define AT91_MATRIX_VIDEO 0x118 /* Video Mode Configuration Register */ -#define AT91C_VDEC_SEL (0x1 << 0) /* Video Mode Selection */ -#define AT91C_VDEC_SEL_OFF (0 << 0) -#define AT91C_VDEC_SEL_ON (1 << 0) - -#define AT91_MATRIX_EBICSA 0x128 /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) -#define AT91_MATRIX_EBI_CS4A_SMC_CF0 (1 << 4) -#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) -#define AT91_MATRIX_EBI_CS5A_SMC_CF1 (1 << 5) -#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) -#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) -#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) -#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */ -#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) -#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) -#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */ -#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) -#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) - -#define AT91_MATRIX_WPMR 0x1E4 /* Write Protect Mode Register */ -#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ -#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) -#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) -#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ - -#define AT91_MATRIX_WPSR 0x1E8 /* Write Protect Status Register */ -#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ -#define AT91_MATRIX_WPSR_NO_WPV (0 << 0) -#define AT91_MATRIX_WPSR_WPV (1 << 0) -#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12.h b/arch/arm/mach-at91/include/mach/at91sam9n12.h deleted file mode 100644 index 0151bcf6163cddd349c5d6f8e88198c3831bf3b9..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9n12.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * SoC specific header file for the AT91SAM9N12 - * - * Copyright (C) 2012 Atmel Corporation - * - * Common definitions, based on AT91SAM9N12 SoC datasheet - * - * Licensed under GPLv2 or later - */ - -#ifndef _AT91SAM9N12_H_ -#define _AT91SAM9N12_H_ - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91SAM9N12_ID_PIOAB 2 /* Parallel I/O Controller A and B */ -#define AT91SAM9N12_ID_PIOCD 3 /* Parallel I/O Controller C and D */ -#define AT91SAM9N12_ID_FUSE 4 /* FUSE Controller */ -#define AT91SAM9N12_ID_USART0 5 /* USART 0 */ -#define AT91SAM9N12_ID_USART1 6 /* USART 1 */ -#define AT91SAM9N12_ID_USART2 7 /* USART 2 */ -#define AT91SAM9N12_ID_USART3 8 /* USART 3 */ -#define AT91SAM9N12_ID_TWI0 9 /* Two-Wire Interface 0 */ -#define AT91SAM9N12_ID_TWI1 10 /* Two-Wire Interface 1 */ -#define AT91SAM9N12_ID_MCI 12 /* High Speed Multimedia Card Interface */ -#define AT91SAM9N12_ID_SPI0 13 /* Serial Peripheral Interface 0 */ -#define AT91SAM9N12_ID_SPI1 14 /* Serial Peripheral Interface 1 */ -#define AT91SAM9N12_ID_UART0 15 /* UART 0 */ -#define AT91SAM9N12_ID_UART1 16 /* UART 1 */ -#define AT91SAM9N12_ID_TCB 17 /* Timer Counter 0, 1, 2, 3, 4 and 5 */ -#define AT91SAM9N12_ID_PWM 18 /* Pulse Width Modulation Controller */ -#define AT91SAM9N12_ID_ADC 19 /* ADC Controller */ -#define AT91SAM9N12_ID_DMA 20 /* DMA Controller */ -#define AT91SAM9N12_ID_UHP 22 /* USB Host High Speed */ -#define AT91SAM9N12_ID_UDP 23 /* USB Device High Speed */ -#define AT91SAM9N12_ID_LCDC 25 /* LCD Controller */ -#define AT91SAM9N12_ID_ISI 25 /* Image Sensor Interface */ -#define AT91SAM9N12_ID_SSC 28 /* Synchronous Serial Controller */ -#define AT91SAM9N12_ID_TRNG 30 /* TRNG */ -#define AT91SAM9N12_ID_IRQ0 31 /* Advanced Interrupt Controller */ - -/* - * User Peripheral physical base addresses. - */ -#define AT91SAM9N12_BASE_USART0 0xf801c000 -#define AT91SAM9N12_BASE_USART1 0xf8020000 -#define AT91SAM9N12_BASE_USART2 0xf8024000 -#define AT91SAM9N12_BASE_USART3 0xf8028000 - -/* - * System Peripherals - */ -#define AT91SAM9N12_BASE_RTC 0xfffffeb0 - -/* - * Internal Memory. - */ -#define AT91SAM9N12_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -#define AT91SAM9N12_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */ - -#define AT91SAM9N12_ROM_BASE 0x00100000 /* Internal ROM base address */ -#define AT91SAM9N12_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h deleted file mode 100644 index 40060cd62fa9fb09db60155cef8c26d0b9604c67..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Matrix-centric header file for the AT91SAM9N12 - * - * Copyright (C) 2012 Atmel Corporation. - * - * Only EBI related registers. - * Write Protect register definitions may be useful. - * - * Licensed under GPLv2 or later. - */ - -#ifndef _AT91SAM9N12_MATRIX_H_ -#define _AT91SAM9N12_MATRIX_H_ - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x118) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3) -#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) -#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) -#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) -#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */ -#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) -#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) -#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */ -#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) -#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) -#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */ -#define AT91_MATRIX_NFD0_ON_D0 (0 << 24) -#define AT91_MATRIX_NFD0_ON_D16 (1 << 24) -#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */ -#define AT91_MATRIX_MP_OFF (0 << 25) -#define AT91_MATRIX_MP_ON (1 << 25) - -#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */ -#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ -#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) -#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) -#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ - -#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */ -#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ -#define AT91_MATRIX_WPSR_NO_WPV (0 << 0) -#define AT91_MATRIX_WPSR_WPV (1 << 0) -#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h deleted file mode 100644 index a15db56d33fa86154020a3419db2a468a0f4b10f..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9260.h - * - * Copyright (C) 2007 Atmel Corporation - * - * Common definitions. - * Based on AT91SAM9RL datasheet revision A. (Preliminary) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#ifndef AT91SAM9RL_H -#define AT91SAM9RL_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT91SAM9RL_ID_PIOD 5 /* Parallel IO Controller D */ -#define AT91SAM9RL_ID_US0 6 /* USART 0 */ -#define AT91SAM9RL_ID_US1 7 /* USART 1 */ -#define AT91SAM9RL_ID_US2 8 /* USART 2 */ -#define AT91SAM9RL_ID_US3 9 /* USART 3 */ -#define AT91SAM9RL_ID_MCI 10 /* Multimedia Card Interface */ -#define AT91SAM9RL_ID_TWI0 11 /* TWI 0 */ -#define AT91SAM9RL_ID_TWI1 12 /* TWI 1 */ -#define AT91SAM9RL_ID_SPI 13 /* Serial Peripheral Interface */ -#define AT91SAM9RL_ID_SSC0 14 /* Serial Synchronous Controller 0 */ -#define AT91SAM9RL_ID_SSC1 15 /* Serial Synchronous Controller 1 */ -#define AT91SAM9RL_ID_TC0 16 /* Timer Counter 0 */ -#define AT91SAM9RL_ID_TC1 17 /* Timer Counter 1 */ -#define AT91SAM9RL_ID_TC2 18 /* Timer Counter 2 */ -#define AT91SAM9RL_ID_PWMC 19 /* Pulse Width Modulation Controller */ -#define AT91SAM9RL_ID_TSC 20 /* Touch Screen Controller */ -#define AT91SAM9RL_ID_DMA 21 /* DMA Controller */ -#define AT91SAM9RL_ID_UDPHS 22 /* USB Device HS */ -#define AT91SAM9RL_ID_LCDC 23 /* LCD Controller */ -#define AT91SAM9RL_ID_AC97C 24 /* AC97 Controller */ -#define AT91SAM9RL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */ - - -/* - * User Peripheral physical base addresses. - */ -#define AT91SAM9RL_BASE_TCB0 0xfffa0000 -#define AT91SAM9RL_BASE_TC0 0xfffa0000 -#define AT91SAM9RL_BASE_TC1 0xfffa0040 -#define AT91SAM9RL_BASE_TC2 0xfffa0080 -#define AT91SAM9RL_BASE_MCI 0xfffa4000 -#define AT91SAM9RL_BASE_TWI0 0xfffa8000 -#define AT91SAM9RL_BASE_TWI1 0xfffac000 -#define AT91SAM9RL_BASE_US0 0xfffb0000 -#define AT91SAM9RL_BASE_US1 0xfffb4000 -#define AT91SAM9RL_BASE_US2 0xfffb8000 -#define AT91SAM9RL_BASE_US3 0xfffbc000 -#define AT91SAM9RL_BASE_SSC0 0xfffc0000 -#define AT91SAM9RL_BASE_SSC1 0xfffc4000 -#define AT91SAM9RL_BASE_PWMC 0xfffc8000 -#define AT91SAM9RL_BASE_SPI 0xfffcc000 -#define AT91SAM9RL_BASE_TSC 0xfffd0000 -#define AT91SAM9RL_BASE_UDPHS 0xfffd4000 -#define AT91SAM9RL_BASE_AC97C 0xfffd8000 - - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS) - -#define AT91SAM9RL_BASE_DMA 0xffffe600 -#define AT91SAM9RL_BASE_ECC 0xffffe800 -#define AT91SAM9RL_BASE_SDRAMC 0xffffea00 -#define AT91SAM9RL_BASE_SMC 0xffffec00 -#define AT91SAM9RL_BASE_MATRIX 0xffffee00 -#define AT91SAM9RL_BASE_DBGU AT91_BASE_DBGU0 -#define AT91SAM9RL_BASE_PIOA 0xfffff400 -#define AT91SAM9RL_BASE_PIOB 0xfffff600 -#define AT91SAM9RL_BASE_PIOC 0xfffff800 -#define AT91SAM9RL_BASE_PIOD 0xfffffa00 -#define AT91SAM9RL_BASE_RSTC 0xfffffd00 -#define AT91SAM9RL_BASE_SHDWC 0xfffffd10 -#define AT91SAM9RL_BASE_RTT 0xfffffd20 -#define AT91SAM9RL_BASE_PIT 0xfffffd30 -#define AT91SAM9RL_BASE_WDT 0xfffffd40 -#define AT91SAM9RL_BASE_GPBR 0xfffffd60 -#define AT91SAM9RL_BASE_RTC 0xfffffe00 - - -/* - * Internal Memory. - */ -#define AT91SAM9RL_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -#define AT91SAM9RL_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */ - -#define AT91SAM9RL_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */ - -#define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */ -#define AT91SAM9RL_UDPHS_FIFO 0x00600000 /* USB Device HS controller */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h deleted file mode 100644 index 6d160adadafc1b068d23270322b7464e30f16abd..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h - * - * Copyright (C) 2007 Atmel Corporation - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9RL datasheet revision A. (Preliminary) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#ifndef AT91SAM9RL_MATRIX_H -#define AT91SAM9RL_MATRIX_H - -#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ - -#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) - -#define AT91_MATRIX_TCMR 0x114 /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) - -#define AT91_MATRIX_EBICSA 0x120 /* EBI0 Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16) - - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h deleted file mode 100644 index 2fc76c49e97cf4152c9427f62a39bad4e71b51d4..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9x5.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * Chip-specific header file for the AT91SAM9x5 family - * - * Copyright (C) 2009-2012 Atmel Corporation. - * - * Common definitions. - * Based on AT91SAM9x5 datasheet. - * - * Licensed under GPLv2 or later. - */ - -#ifndef AT91SAM9X5_H -#define AT91SAM9X5_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91SAM9X5_ID_PIOAB 2 /* Parallel I/O Controller A and B */ -#define AT91SAM9X5_ID_PIOCD 3 /* Parallel I/O Controller C and D */ -#define AT91SAM9X5_ID_SMD 4 /* SMD Soft Modem (SMD) */ -#define AT91SAM9X5_ID_USART0 5 /* USART 0 */ -#define AT91SAM9X5_ID_USART1 6 /* USART 1 */ -#define AT91SAM9X5_ID_USART2 7 /* USART 2 */ -#define AT91SAM9X5_ID_USART3 8 /* USART 3 */ -#define AT91SAM9X5_ID_TWI0 9 /* Two-Wire Interface 0 */ -#define AT91SAM9X5_ID_TWI1 10 /* Two-Wire Interface 1 */ -#define AT91SAM9X5_ID_TWI2 11 /* Two-Wire Interface 2 */ -#define AT91SAM9X5_ID_MCI0 12 /* High Speed Multimedia Card Interface 0 */ -#define AT91SAM9X5_ID_SPI0 13 /* Serial Peripheral Interface 0 */ -#define AT91SAM9X5_ID_SPI1 14 /* Serial Peripheral Interface 1 */ -#define AT91SAM9X5_ID_UART0 15 /* UART 0 */ -#define AT91SAM9X5_ID_UART1 16 /* UART 1 */ -#define AT91SAM9X5_ID_TCB 17 /* Timer Counter 0, 1, 2, 3, 4 and 5 */ -#define AT91SAM9X5_ID_PWM 18 /* Pulse Width Modulation Controller */ -#define AT91SAM9X5_ID_ADC 19 /* ADC Controller */ -#define AT91SAM9X5_ID_DMA0 20 /* DMA Controller 0 */ -#define AT91SAM9X5_ID_DMA1 21 /* DMA Controller 1 */ -#define AT91SAM9X5_ID_UHPHS 22 /* USB Host High Speed */ -#define AT91SAM9X5_ID_UDPHS 23 /* USB Device High Speed */ -#define AT91SAM9X5_ID_EMAC0 24 /* Ethernet MAC0 */ -#define AT91SAM9X5_ID_LCDC 25 /* LCD Controller */ -#define AT91SAM9X5_ID_ISI 25 /* Image Sensor Interface */ -#define AT91SAM9X5_ID_MCI1 26 /* High Speed Multimedia Card Interface 1 */ -#define AT91SAM9X5_ID_EMAC1 27 /* Ethernet MAC1 */ -#define AT91SAM9X5_ID_SSC 28 /* Synchronous Serial Controller */ -#define AT91SAM9X5_ID_CAN0 29 /* CAN Controller 0 */ -#define AT91SAM9X5_ID_CAN1 30 /* CAN Controller 1 */ -#define AT91SAM9X5_ID_IRQ0 31 /* Advanced Interrupt Controller */ - -/* - * User Peripheral physical base addresses. - */ -#define AT91SAM9X5_BASE_USART0 0xf801c000 -#define AT91SAM9X5_BASE_USART1 0xf8020000 -#define AT91SAM9X5_BASE_USART2 0xf8024000 - -/* - * System Peripherals - */ -#define AT91SAM9X5_BASE_RTC 0xfffffeb0 - -/* - * Internal Memory. - */ -#define AT91SAM9X5_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -#define AT91SAM9X5_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */ - -#define AT91SAM9X5_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91SAM9X5_ROM_SIZE SZ_64K /* Internal ROM size (64Kb) */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h deleted file mode 100644 index a606d3966470da4fb411ca88419861f541d14a4b..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Matrix-centric header file for the AT91SAM9x5 family - * - * Copyright (C) 2009-2012 Atmel Corporation. - * - * Only EBI related registers. - * Write Protect register definitions may be useful. - * - * Licensed under GPLv2 or later. - */ - -#ifndef AT91SAM9X5_MATRIX_H -#define AT91SAM9X5_MATRIX_H - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3) -#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) -#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) -#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) -#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */ -#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) -#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) -#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */ -#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) -#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) -#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */ -#define AT91_MATRIX_NFD0_ON_D0 (0 << 24) -#define AT91_MATRIX_NFD0_ON_D16 (1 << 24) -#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */ -#define AT91_MATRIX_MP_OFF (0 << 25) -#define AT91_MATRIX_MP_ON (1 << 25) - -#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */ -#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ -#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) -#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) -#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ - -#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */ -#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ -#define AT91_MATRIX_WPSR_NO_WPV (0 << 0) -#define AT91_MATRIX_WPSR_WPV (1 << 0) -#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h deleted file mode 100644 index ce7c80a44983f350260b1dd2441569798d84d0fa..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ /dev/null @@ -1,216 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/cpu.h - * - * Copyright (C) 2006 SAN People - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __MACH_CPU_H__ -#define __MACH_CPU_H__ - -#define ARCH_ID_AT91RM9200 0x09290780 -#define ARCH_ID_AT91SAM9260 0x019803a0 -#define ARCH_ID_AT91SAM9261 0x019703a0 -#define ARCH_ID_AT91SAM9263 0x019607a0 -#define ARCH_ID_AT91SAM9G10 0x019903a0 -#define ARCH_ID_AT91SAM9G20 0x019905a0 -#define ARCH_ID_AT91SAM9RL64 0x019b03a0 -#define ARCH_ID_AT91SAM9G45 0x819b05a0 -#define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */ -#define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */ -#define ARCH_ID_AT91SAM9X5 0x819a05a0 -#define ARCH_ID_AT91SAM9N12 0x819a07a0 - -#define ARCH_ID_AT91SAM9XE128 0x329973a0 -#define ARCH_ID_AT91SAM9XE256 0x329a93a0 -#define ARCH_ID_AT91SAM9XE512 0x329aa3a0 - -#define ARCH_ID_AT91M40800 0x14080044 -#define ARCH_ID_AT91R40807 0x44080746 -#define ARCH_ID_AT91M40807 0x14080745 -#define ARCH_ID_AT91R40008 0x44000840 - -#define ARCH_ID_SAMA5 0x8A5C07C0 - -#define ARCH_EXID_AT91SAM9M11 0x00000001 -#define ARCH_EXID_AT91SAM9M10 0x00000002 -#define ARCH_EXID_AT91SAM9G46 0x00000003 -#define ARCH_EXID_AT91SAM9G45 0x00000004 - -#define ARCH_EXID_AT91SAM9G15 0x00000000 -#define ARCH_EXID_AT91SAM9G35 0x00000001 -#define ARCH_EXID_AT91SAM9X35 0x00000002 -#define ARCH_EXID_AT91SAM9G25 0x00000003 -#define ARCH_EXID_AT91SAM9X25 0x00000004 - -#define ARCH_EXID_SAMA5D3 0x00004300 -#define ARCH_EXID_SAMA5D31 0x00444300 -#define ARCH_EXID_SAMA5D33 0x00414300 -#define ARCH_EXID_SAMA5D34 0x00414301 -#define ARCH_EXID_SAMA5D35 0x00584300 -#define ARCH_EXID_SAMA5D36 0x00004301 - -#define ARCH_EXID_SAMA5D4 0x00000007 -#define ARCH_EXID_SAMA5D41 0x00000001 -#define ARCH_EXID_SAMA5D42 0x00000002 -#define ARCH_EXID_SAMA5D43 0x00000003 -#define ARCH_EXID_SAMA5D44 0x00000004 - -#define ARCH_FAMILY_AT91SAM9 0x01900000 -#define ARCH_FAMILY_AT91SAM9XE 0x02900000 - -/* RM9200 type */ -#define ARCH_REVISON_9200_BGA (0 << 0) -#define ARCH_REVISON_9200_PQFP (1 << 0) - -#ifndef __ASSEMBLY__ -enum at91_soc_type { - /* 920T */ - AT91_SOC_RM9200, - - /* SAM92xx */ - AT91_SOC_SAM9260, AT91_SOC_SAM9261, AT91_SOC_SAM9263, - - /* SAM9Gxx */ - AT91_SOC_SAM9G10, AT91_SOC_SAM9G20, AT91_SOC_SAM9G45, - - /* SAM9RL */ - AT91_SOC_SAM9RL, - - /* SAM9X5 */ - AT91_SOC_SAM9X5, - - /* SAM9N12 */ - AT91_SOC_SAM9N12, - - /* SAMA5D3 */ - AT91_SOC_SAMA5D3, - - /* SAMA5D4 */ - AT91_SOC_SAMA5D4, - - /* Unknown type */ - AT91_SOC_UNKNOWN, -}; - -enum at91_soc_subtype { - /* RM9200 */ - AT91_SOC_RM9200_BGA, AT91_SOC_RM9200_PQFP, - - /* SAM9260 */ - AT91_SOC_SAM9XE, - - /* SAM9G45 */ - AT91_SOC_SAM9G45ES, AT91_SOC_SAM9M10, AT91_SOC_SAM9G46, AT91_SOC_SAM9M11, - - /* SAM9X5 */ - AT91_SOC_SAM9G15, AT91_SOC_SAM9G35, AT91_SOC_SAM9X35, - AT91_SOC_SAM9G25, AT91_SOC_SAM9X25, - - /* SAMA5D3 */ - AT91_SOC_SAMA5D31, AT91_SOC_SAMA5D33, AT91_SOC_SAMA5D34, - AT91_SOC_SAMA5D35, AT91_SOC_SAMA5D36, - - /* SAMA5D4 */ - AT91_SOC_SAMA5D41, AT91_SOC_SAMA5D42, AT91_SOC_SAMA5D43, - AT91_SOC_SAMA5D44, - - /* No subtype for this SoC */ - AT91_SOC_SUBTYPE_NONE, - - /* Unknown subtype */ - AT91_SOC_SUBTYPE_UNKNOWN, -}; - -struct at91_socinfo { - unsigned int type, subtype; - unsigned int cidr, exid; -}; - -extern struct at91_socinfo at91_soc_initdata; -const char *at91_get_soc_type(struct at91_socinfo *c); -const char *at91_get_soc_subtype(struct at91_socinfo *c); - -static inline int at91_soc_is_detected(void) -{ - return at91_soc_initdata.type != AT91_SOC_UNKNOWN; -} - -#ifdef CONFIG_SOC_AT91RM9200 -#define cpu_is_at91rm9200() (at91_soc_initdata.type == AT91_SOC_RM9200) -#define cpu_is_at91rm9200_bga() (at91_soc_initdata.subtype == AT91_SOC_RM9200_BGA) -#define cpu_is_at91rm9200_pqfp() (at91_soc_initdata.subtype == AT91_SOC_RM9200_PQFP) -#else -#define cpu_is_at91rm9200() (0) -#define cpu_is_at91rm9200_bga() (0) -#define cpu_is_at91rm9200_pqfp() (0) -#endif - -#ifdef CONFIG_SOC_AT91SAM9 -#define cpu_is_at91sam9xe() (at91_soc_initdata.subtype == AT91_SOC_SAM9XE) -#define cpu_is_at91sam9260() (at91_soc_initdata.type == AT91_SOC_SAM9260) -#define cpu_is_at91sam9g20() (at91_soc_initdata.type == AT91_SOC_SAM9G20) -#define cpu_is_at91sam9261() (at91_soc_initdata.type == AT91_SOC_SAM9261) -#define cpu_is_at91sam9g10() (at91_soc_initdata.type == AT91_SOC_SAM9G10) -#define cpu_is_at91sam9263() (at91_soc_initdata.type == AT91_SOC_SAM9263) -#define cpu_is_at91sam9rl() (at91_soc_initdata.type == AT91_SOC_SAM9RL) -#define cpu_is_at91sam9g45() (at91_soc_initdata.type == AT91_SOC_SAM9G45) -#define cpu_is_at91sam9g45es() (at91_soc_initdata.subtype == AT91_SOC_SAM9G45ES) -#define cpu_is_at91sam9m10() (at91_soc_initdata.subtype == AT91_SOC_SAM9M10) -#define cpu_is_at91sam9g46() (at91_soc_initdata.subtype == AT91_SOC_SAM9G46) -#define cpu_is_at91sam9m11() (at91_soc_initdata.subtype == AT91_SOC_SAM9M11) -#define cpu_is_at91sam9x5() (at91_soc_initdata.type == AT91_SOC_SAM9X5) -#define cpu_is_at91sam9g15() (at91_soc_initdata.subtype == AT91_SOC_SAM9G15) -#define cpu_is_at91sam9g35() (at91_soc_initdata.subtype == AT91_SOC_SAM9G35) -#define cpu_is_at91sam9x35() (at91_soc_initdata.subtype == AT91_SOC_SAM9X35) -#define cpu_is_at91sam9g25() (at91_soc_initdata.subtype == AT91_SOC_SAM9G25) -#define cpu_is_at91sam9x25() (at91_soc_initdata.subtype == AT91_SOC_SAM9X25) -#define cpu_is_at91sam9n12() (at91_soc_initdata.type == AT91_SOC_SAM9N12) -#else -#define cpu_is_at91sam9xe() (0) -#define cpu_is_at91sam9260() (0) -#define cpu_is_at91sam9g20() (0) -#define cpu_is_at91sam9261() (0) -#define cpu_is_at91sam9g10() (0) -#define cpu_is_at91sam9263() (0) -#define cpu_is_at91sam9rl() (0) -#define cpu_is_at91sam9g45() (0) -#define cpu_is_at91sam9g45es() (0) -#define cpu_is_at91sam9m10() (0) -#define cpu_is_at91sam9g46() (0) -#define cpu_is_at91sam9m11() (0) -#define cpu_is_at91sam9x5() (0) -#define cpu_is_at91sam9g15() (0) -#define cpu_is_at91sam9g35() (0) -#define cpu_is_at91sam9x35() (0) -#define cpu_is_at91sam9g25() (0) -#define cpu_is_at91sam9x25() (0) -#define cpu_is_at91sam9n12() (0) -#endif - -#ifdef CONFIG_SOC_SAMA5D3 -#define cpu_is_sama5d3() (at91_soc_initdata.type == AT91_SOC_SAMA5D3) -#else -#define cpu_is_sama5d3() (0) -#endif - -#ifdef CONFIG_SOC_SAMA5D4 -#define cpu_is_sama5d4() (at91_soc_initdata.type == AT91_SOC_SAMA5D4) -#else -#define cpu_is_sama5d4() (0) -#endif - -/* - * Since this is ARM, we will never run on any AVR32 CPU. But these - * definitions may reduce clutter in common drivers. - */ -#define cpu_is_at32ap7000() (0) -#endif /* __ASSEMBLY__ */ - -#endif /* __MACH_CPU_H__ */ diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h deleted file mode 100644 index cacbaa52418f6b17af3b2a1824fcf732871e0c49..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ /dev/null @@ -1,134 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/hardware.h - * - * Copyright (C) 2003 SAN People - * Copyright (C) 2003 ATMEL - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include - -/* DBGU base */ -/* rm9200, 9260/9g20, 9261/9g10, 9rl */ -#define AT91_BASE_DBGU0 0xfffff200 -/* 9263, 9g45, sama5d3 */ -#define AT91_BASE_DBGU1 0xffffee00 -/* sama5d4 */ -#define AT91_BASE_DBGU2 0xfc069000 - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * On all at91 except rm9200 and x40 have the System Controller starts - * at address 0xffffc000 and has a size of 16KiB. - * - * On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting - * at 0xfffff000 - * - * Removes the individual definitions of AT91_BASE_SYS and - * replaces them with a common version at base 0xfffffc000 and size 16KiB - * and map the same memory space - */ -#define AT91_BASE_SYS 0xffffc000 - -/* - * On sama5d4 there is no system controller, we map some needed peripherals - */ -#define AT91_ALT_BASE_SYS 0xfc069000 - -/* - * On all at91 have the Advanced Interrupt Controller starts at address - * 0xfffff000 and the Power Management Controller starts at 0xfffffc00 - */ -#define AT91_AIC 0xfffff000 -#define AT91_PMC 0xfffffc00 - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ - -#ifdef CONFIG_MMU -/* - * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF - * to 0xFEF78000 .. 0xFF000000. (544Kb) - */ -#define AT91_IO_PHYS_BASE 0xFFF78000 -#define AT91_IO_VIRT_BASE IOMEM(0xFF000000 - AT91_IO_SIZE) - -/* - * On sama5d4, remap the peripherals from address 0xFC069000 .. 0xFC06F000 - * to 0xFB069000 .. 0xFB06F000. (24Kb) - */ -#define AT91_ALT_IO_PHYS_BASE AT91_ALT_BASE_SYS -#define AT91_ALT_IO_VIRT_BASE IOMEM(0xFB069000) -#else -/* - * Identity mapping for the non MMU case. - */ -#define AT91_IO_PHYS_BASE AT91_BASE_SYS -#define AT91_IO_VIRT_BASE IOMEM(AT91_IO_PHYS_BASE) - -#define AT91_ALT_IO_PHYS_BASE AT91_ALT_BASE_SYS -#define AT91_ALT_IO_VIRT_BASE IOMEM(AT91_ALT_BASE_SYS) -#endif - -#define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1) - - /* Convert a physical IO address to virtual IO address */ -#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE) -#define AT91_ALT_IO_P2V(x) ((x) - AT91_ALT_IO_PHYS_BASE + AT91_ALT_IO_VIRT_BASE) - -/* - * Virtual to Physical Address mapping for IO devices. - */ -#define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS) -#define AT91_ALT_VA_BASE_SYS AT91_ALT_IO_P2V(AT91_ALT_BASE_SYS) - - /* Internal SRAM is mapped below the IO devices */ -#define AT91_SRAM_MAX SZ_1M -#define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX) - -/* External Memory Map */ -#define AT91_CHIPSELECT_0 0x10000000 -#define AT91_CHIPSELECT_1 0x20000000 -#define AT91_CHIPSELECT_2 0x30000000 -#define AT91_CHIPSELECT_3 0x40000000 -#define AT91_CHIPSELECT_4 0x50000000 -#define AT91_CHIPSELECT_5 0x60000000 -#define AT91_CHIPSELECT_6 0x70000000 -#define AT91_CHIPSELECT_7 0x80000000 - -/* Clocks */ -#define AT91_SLOW_CLOCK 32768 /* slow clock */ - -/* - * FIXME: this is needed to communicate between the pinctrl driver and - * the PM implementation in the machine. Possibly part of the PM - * implementation should be moved down into the pinctrl driver and get - * called as part of the generic suspend/resume path. - */ -#ifndef __ASSEMBLY__ -extern void at91_pinctrl_gpio_suspend(void); -extern void at91_pinctrl_gpio_resume(void); -#endif - -#endif diff --git a/arch/arm/mach-at91/include/mach/sama5d3.h b/arch/arm/mach-at91/include/mach/sama5d3.h deleted file mode 100644 index 25613d8c6dcd6687dd0b896883aedbe52f3461c6..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/sama5d3.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Chip-specific header file for the SAMA5D3 family - * - * Copyright (C) 2013 Atmel, - * 2013 Ludovic Desroches - * - * Common definitions. - * Based on SAMA5D3 datasheet. - * - * Licensed under GPLv2 or later. - */ - -#ifndef SAMA5D3_H -#define SAMA5D3_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ -#define SAMA5D3_ID_DBGU 2 /* debug Unit (usually no special interrupt line) */ -#define AT91_ID_PIT 3 /* PIT */ -#define SAMA5D3_ID_WDT 4 /* Watchdog Timer Interrupt */ -#define SAMA5D3_ID_HSMC 5 /* Static Memory Controller */ -#define SAMA5D3_ID_PIOA 6 /* PIOA */ -#define SAMA5D3_ID_PIOB 7 /* PIOB */ -#define SAMA5D3_ID_PIOC 8 /* PIOC */ -#define SAMA5D3_ID_PIOD 9 /* PIOD */ -#define SAMA5D3_ID_PIOE 10 /* PIOE */ -#define SAMA5D3_ID_SMD 11 /* SMD Soft Modem */ -#define SAMA5D3_ID_USART0 12 /* USART0 */ -#define SAMA5D3_ID_USART1 13 /* USART1 */ -#define SAMA5D3_ID_USART2 14 /* USART2 */ -#define SAMA5D3_ID_USART3 15 /* USART3 */ -#define SAMA5D3_ID_UART0 16 /* UART 0 */ -#define SAMA5D3_ID_UART1 17 /* UART 1 */ -#define SAMA5D3_ID_TWI0 18 /* Two-Wire Interface 0 */ -#define SAMA5D3_ID_TWI1 19 /* Two-Wire Interface 1 */ -#define SAMA5D3_ID_TWI2 20 /* Two-Wire Interface 2 */ -#define SAMA5D3_ID_HSMCI0 21 /* MCI */ -#define SAMA5D3_ID_HSMCI1 22 /* MCI */ -#define SAMA5D3_ID_HSMCI2 23 /* MCI */ -#define SAMA5D3_ID_SPI0 24 /* Serial Peripheral Interface 0 */ -#define SAMA5D3_ID_SPI1 25 /* Serial Peripheral Interface 1 */ -#define SAMA5D3_ID_TC0 26 /* Timer Counter 0 */ -#define SAMA5D3_ID_TC1 27 /* Timer Counter 2 */ -#define SAMA5D3_ID_PWM 28 /* Pulse Width Modulation Controller */ -#define SAMA5D3_ID_ADC 29 /* Touch Screen ADC Controller */ -#define SAMA5D3_ID_DMA0 30 /* DMA Controller 0 */ -#define SAMA5D3_ID_DMA1 31 /* DMA Controller 1 */ -#define SAMA5D3_ID_UHPHS 32 /* USB Host High Speed */ -#define SAMA5D3_ID_UDPHS 33 /* USB Device High Speed */ -#define SAMA5D3_ID_GMAC 34 /* Gigabit Ethernet MAC */ -#define SAMA5D3_ID_EMAC 35 /* Ethernet MAC */ -#define SAMA5D3_ID_LCDC 36 /* LCD Controller */ -#define SAMA5D3_ID_ISI 37 /* Image Sensor Interface */ -#define SAMA5D3_ID_SSC0 38 /* Synchronous Serial Controller 0 */ -#define SAMA5D3_ID_SSC1 39 /* Synchronous Serial Controller 1 */ -#define SAMA5D3_ID_CAN0 40 /* CAN Controller 0 */ -#define SAMA5D3_ID_CAN1 41 /* CAN Controller 1 */ -#define SAMA5D3_ID_SHA 42 /* Secure Hash Algorithm */ -#define SAMA5D3_ID_AES 43 /* Advanced Encryption Standard */ -#define SAMA5D3_ID_TDES 44 /* Triple Data Encryption Standard */ -#define SAMA5D3_ID_TRNG 45 /* True Random Generator Number */ -#define SAMA5D3_ID_IRQ0 47 /* Advanced Interrupt Controller (IRQ0) */ - -/* - * User Peripheral physical base addresses. - */ -#define SAMA5D3_BASE_USART0 0xf001c000 -#define SAMA5D3_BASE_USART1 0xf0020000 -#define SAMA5D3_BASE_USART2 0xf8020000 -#define SAMA5D3_BASE_USART3 0xf8024000 - -/* - * System Peripherals - */ -#define SAMA5D3_BASE_RTC 0xfffffeb0 - -/* - * Internal Memory - */ -#define SAMA5D3_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -#define SAMA5D3_SRAM_SIZE (128 * SZ_1K) /* Internal SRAM size (128Kb) */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/sama5d4.h b/arch/arm/mach-at91/include/mach/sama5d4.h deleted file mode 100644 index f256a45d98540cd13089e90877c91bbd09fbaa1a..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/sama5d4.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Chip-specific header file for the SAMA5D4 family - * - * Copyright (C) 2013 Atmel Corporation, - * Nicolas Ferre - * - * Common definitions. - * Based on SAMA5D4 datasheet. - * - * Licensed under GPLv2 or later. - */ - -#ifndef SAMA5D4_H -#define SAMA5D4_H - -/* - * User Peripheral physical base addresses. - */ -#define SAMA5D4_BASE_USART3 0xfc00c000 /* (USART3 non-secure) Base Address */ -#define SAMA5D4_BASE_PMC 0xf0018000 /* (PMC) Base Address */ -#define SAMA5D4_BASE_MPDDRC 0xf0010000 /* (MPDDRC) Base Address */ -#define SAMA5D4_BASE_PIOD 0xfc068000 /* (PIOD) Base Address */ - -/* Some other peripherals */ -#define SAMA5D4_BASE_SYS2 SAMA5D4_BASE_PIOD - -/* - * Internal Memory. - */ -#define SAMA5D4_NS_SRAM_BASE 0x00210000 /* Internal SRAM base address Non-Secure */ -#define SAMA5D4_NS_SRAM_SIZE (64 * SZ_1K) /* Internal SRAM size Non-Secure part (64Kb) */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h deleted file mode 100644 index 4ebb609369e36895e0da7e68021eb6cbc962532e..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/uncompress.h +++ /dev/null @@ -1,218 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/uncompress.h - * - * Copyright (C) 2003 SAN People - * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include -#include -#include - -#include -#include - -void __iomem *at91_uart; - -static const u32 uarts_rm9200[] = { - AT91_BASE_DBGU0, - AT91RM9200_BASE_US0, - AT91RM9200_BASE_US1, - AT91RM9200_BASE_US2, - AT91RM9200_BASE_US3, - 0, -}; - -static const u32 uarts_sam9260[] = { - AT91_BASE_DBGU0, - AT91SAM9260_BASE_US0, - AT91SAM9260_BASE_US1, - AT91SAM9260_BASE_US2, - AT91SAM9260_BASE_US3, - AT91SAM9260_BASE_US4, - AT91SAM9260_BASE_US5, - 0, -}; - -static const u32 uarts_sam9261[] = { - AT91_BASE_DBGU0, - AT91SAM9261_BASE_US0, - AT91SAM9261_BASE_US1, - AT91SAM9261_BASE_US2, - 0, -}; - -static const u32 uarts_sam9263[] = { - AT91_BASE_DBGU1, - AT91SAM9263_BASE_US0, - AT91SAM9263_BASE_US1, - AT91SAM9263_BASE_US2, - 0, -}; - -static const u32 uarts_sam9g45[] = { - AT91_BASE_DBGU1, - AT91SAM9G45_BASE_US0, - AT91SAM9G45_BASE_US1, - AT91SAM9G45_BASE_US2, - AT91SAM9G45_BASE_US3, - 0, -}; - -static const u32 uarts_sam9rl[] = { - AT91_BASE_DBGU0, - AT91SAM9RL_BASE_US0, - AT91SAM9RL_BASE_US1, - AT91SAM9RL_BASE_US2, - AT91SAM9RL_BASE_US3, - 0, -}; - -static const u32 uarts_sam9x5[] = { - AT91_BASE_DBGU0, - AT91SAM9X5_BASE_USART0, - AT91SAM9X5_BASE_USART1, - AT91SAM9X5_BASE_USART2, - 0, -}; - -static const u32 uarts_sama5d3[] = { - AT91_BASE_DBGU1, - SAMA5D3_BASE_USART0, - SAMA5D3_BASE_USART1, - SAMA5D3_BASE_USART2, - SAMA5D3_BASE_USART3, - 0, -}; - -static const u32 uarts_sama5d4[] = { - AT91_BASE_DBGU2, - SAMA5D4_BASE_USART3, - 0, -}; - -static inline const u32* decomp_soc_detect(void __iomem *dbgu_base) -{ - u32 cidr, socid; - - cidr = __raw_readl(dbgu_base + AT91_DBGU_CIDR); - socid = cidr & ~AT91_CIDR_VERSION; - - switch (socid) { - case ARCH_ID_AT91RM9200: - return uarts_rm9200; - - case ARCH_ID_AT91SAM9G20: - case ARCH_ID_AT91SAM9260: - return uarts_sam9260; - - case ARCH_ID_AT91SAM9261: - return uarts_sam9261; - - case ARCH_ID_AT91SAM9263: - return uarts_sam9263; - - case ARCH_ID_AT91SAM9G45: - return uarts_sam9g45; - - case ARCH_ID_AT91SAM9RL64: - return uarts_sam9rl; - - case ARCH_ID_AT91SAM9N12: - case ARCH_ID_AT91SAM9X5: - return uarts_sam9x5; - - case ARCH_ID_SAMA5: - cidr = __raw_readl(dbgu_base + AT91_DBGU_EXID); - if (cidr & ARCH_EXID_SAMA5D3) - return uarts_sama5d3; - else if (cidr & ARCH_EXID_SAMA5D4) - return uarts_sama5d4; - - break; - } - - /* at91sam9g10 */ - if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { - return uarts_sam9261; - } - /* at91sam9xe */ - else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) { - return uarts_sam9260; - } - - return NULL; -} - -static inline void arch_decomp_setup(void) -{ - int i = 0; - const u32* usarts; - - usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU0); - if (!usarts) - usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU1); - if (!usarts) - usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU2); - if (!usarts) { - at91_uart = NULL; - return; - } - - do { - /* physical address */ - at91_uart = (void __iomem *)usarts[i]; - - if (__raw_readl(at91_uart + ATMEL_US_BRGR)) - return; - i++; - } while (usarts[i]); - - at91_uart = NULL; -} - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. If you didn't setup a port in - * your bootloader then nothing will appear (which might be desired). - * - * This does not append a newline - */ -static void putc(int c) -{ - if (!at91_uart) - return; - - while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXRDY)) - barrier(); - __raw_writel(c, at91_uart + ATMEL_US_THR); -} - -static inline void flush(void) -{ - if (!at91_uart) - return; - - /* wait for transmission to complete */ - while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXEMPTY)) - barrier(); -} - -#endif diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index aa4116e9452f725e0f63241cfc083576c665be19..5062699cbb1258697c8f95046f30a125e4e14cae 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -29,19 +29,26 @@ #include #include #include - -#include -#include +#include +#include #include "generic.h" #include "pm.h" +/* + * FIXME: this is needed to communicate between the pinctrl driver and + * the PM implementation in the machine. Possibly part of the PM + * implementation should be moved down into the pinctrl driver and get + * called as part of the generic suspend/resume path. + */ +extern void at91_pinctrl_gpio_suspend(void); +extern void at91_pinctrl_gpio_resume(void); + static struct { unsigned long uhp_udp_mask; int memctrl; } at91_pm_data; -static void (*at91_pm_standby)(void); void __iomem *at91_ramc_base[2]; static int at91_pm_valid_state(suspend_state_t state) @@ -119,76 +126,67 @@ int at91_suspend_entering_slow_clock(void) } EXPORT_SYMBOL(at91_suspend_entering_slow_clock); - -static void (*slow_clock)(void __iomem *pmc, void __iomem *ramc0, +static void (*at91_suspend_sram_fn)(void __iomem *pmc, void __iomem *ramc0, void __iomem *ramc1, int memctrl); -#ifdef CONFIG_AT91_SLOW_CLOCK -extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0, +extern void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *ramc0, void __iomem *ramc1, int memctrl); -extern u32 at91_slow_clock_sz; -#endif +extern u32 at91_pm_suspend_in_sram_sz; + +static void at91_pm_suspend(suspend_state_t state) +{ + unsigned int pm_data = at91_pm_data.memctrl; + + pm_data |= (state == PM_SUSPEND_MEM) ? + AT91_PM_MODE(AT91_PM_SLOW_CLOCK) : 0; + + flush_cache_all(); + outer_disable(); + + at91_suspend_sram_fn(at91_pmc_base, at91_ramc_base[0], + at91_ramc_base[1], pm_data); + + outer_resume(); +} static int at91_pm_enter(suspend_state_t state) { at91_pinctrl_gpio_suspend(); switch (state) { + /* + * Suspend-to-RAM is like STANDBY plus slow clock mode, so + * drivers must suspend more deeply, the master clock switches + * to the clk32k and turns off the main oscillator + */ + case PM_SUSPEND_MEM: /* - * Suspend-to-RAM is like STANDBY plus slow clock mode, so - * drivers must suspend more deeply: only the master clock - * controller may be using the main oscillator. + * Ensure that clocks are in a valid state. */ - case PM_SUSPEND_MEM: - /* - * Ensure that clocks are in a valid state. - */ - if (!at91_pm_verify_clocks()) - goto error; - - /* - * Enter slow clock mode by switching over to clk32k and - * turning off the main oscillator; reverse on wakeup. - */ - if (slow_clock) { -#ifdef CONFIG_AT91_SLOW_CLOCK - /* copy slow_clock handler to SRAM, and call it */ - memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz); -#endif - slow_clock(at91_pmc_base, at91_ramc_base[0], - at91_ramc_base[1], - at91_pm_data.memctrl); - break; - } else { - pr_info("AT91: PM - no slow clock mode enabled ...\n"); - /* FALLTHROUGH leaving master clock alone */ - } + if (!at91_pm_verify_clocks()) + goto error; - /* - * STANDBY mode has *all* drivers suspended; ignores irqs not - * marked as 'wakeup' event sources; and reduces DRAM power. - * But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and - * nothing fancy done with main or cpu clocks. - */ - case PM_SUSPEND_STANDBY: - /* - * NOTE: the Wait-for-Interrupt instruction needs to be - * in icache so no SDRAM accesses are needed until the - * wakeup IRQ occurs and self-refresh is terminated. - * For ARM 926 based chips, this requirement is weaker - * as at91sam9 can access a RAM in self-refresh mode. - */ - if (at91_pm_standby) - at91_pm_standby(); - break; + at91_pm_suspend(state); - case PM_SUSPEND_ON: - cpu_do_idle(); - break; + break; - default: - pr_debug("AT91: PM - bogus suspend state %d\n", state); - goto error; + /* + * STANDBY mode has *all* drivers suspended; ignores irqs not + * marked as 'wakeup' event sources; and reduces DRAM power. + * But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and + * nothing fancy done with main or cpu clocks. + */ + case PM_SUSPEND_STANDBY: + at91_pm_suspend(state); + break; + + case PM_SUSPEND_ON: + cpu_do_idle(); + break; + + default: + pr_debug("AT91: PM - bogus suspend state %d\n", state); + goto error; } error: @@ -218,12 +216,99 @@ static struct platform_device at91_cpuidle_device = { .name = "cpuidle-at91", }; -void at91_pm_set_standby(void (*at91_standby)(void)) +static void at91_pm_set_standby(void (*at91_standby)(void)) { - if (at91_standby) { + if (at91_standby) at91_cpuidle_device.dev.platform_data = at91_standby; - at91_pm_standby = at91_standby; +} + +/* + * The AT91RM9200 goes into self-refresh mode with this command, and will + * terminate self-refresh automatically on the next SDRAM access. + * + * Self-refresh mode is exited as soon as a memory access is made, but we don't + * know for sure when that happens. However, we need to restore the low-power + * mode if it was enabled before going idle. Restoring low-power mode while + * still in self-refresh is "not recommended", but seems to work. + */ +static void at91rm9200_standby(void) +{ + u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR); + + asm volatile( + "b 1f\n\t" + ".align 5\n\t" + "1: mcr p15, 0, %0, c7, c10, 4\n\t" + " str %0, [%1, %2]\n\t" + " str %3, [%1, %4]\n\t" + " mcr p15, 0, %0, c7, c0, 4\n\t" + " str %5, [%1, %2]" + : + : "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR), + "r" (1), "r" (AT91RM9200_SDRAMC_SRR), + "r" (lpr)); +} + +/* We manage both DDRAM/SDRAM controllers, we need more than one value to + * remember. + */ +static void at91_ddr_standby(void) +{ + /* Those two values allow us to delay self-refresh activation + * to the maximum. */ + u32 lpr0, lpr1 = 0; + u32 saved_lpr0, saved_lpr1 = 0; + + if (at91_ramc_base[1]) { + saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR); + lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB; + lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH; + } + + saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR); + lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB; + lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH; + + /* self-refresh mode now */ + at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0); + if (at91_ramc_base[1]) + at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1); + + cpu_do_idle(); + + at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); + if (at91_ramc_base[1]) + at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); +} + +/* We manage both DDRAM/SDRAM controllers, we need more than one value to + * remember. + */ +static void at91sam9_sdram_standby(void) +{ + u32 lpr0, lpr1 = 0; + u32 saved_lpr0, saved_lpr1 = 0; + + if (at91_ramc_base[1]) { + saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR); + lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB; + lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH; } + + saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR); + lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB; + lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH; + + /* self-refresh mode now */ + at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0); + if (at91_ramc_base[1]) + at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1); + + cpu_do_idle(); + + at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0); + if (at91_ramc_base[1]) + at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1); } static const struct of_device_id ramc_ids[] __initconst = { @@ -263,7 +348,6 @@ static __init void at91_dt_ramc(void) at91_pm_set_standby(standby); } -#ifdef CONFIG_AT91_SLOW_CLOCK static void __init at91_pm_sram_init(void) { struct gen_pool *sram_pool; @@ -291,30 +375,36 @@ static void __init at91_pm_sram_init(void) return; } - sram_base = gen_pool_alloc(sram_pool, at91_slow_clock_sz); + sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz); if (!sram_base) { - pr_warn("%s: unable to alloc ocram!\n", __func__); + pr_warn("%s: unable to alloc sram!\n", __func__); return; } sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base); - slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false); -} -#endif + at91_suspend_sram_fn = __arm_ioremap_exec(sram_pbase, + at91_pm_suspend_in_sram_sz, false); + if (!at91_suspend_sram_fn) { + pr_warn("SRAM: Could not map\n"); + return; + } + /* Copy the pm suspend handler to SRAM */ + at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn, + &at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz); +} static void __init at91_pm_init(void) { -#ifdef CONFIG_AT91_SLOW_CLOCK at91_pm_sram_init(); -#endif - - pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : "")); if (at91_cpuidle_device.dev.platform_data) platform_device_register(&at91_cpuidle_device); - suspend_set_ops(&at91_pm_ops); + if (at91_suspend_sram_fn) + suspend_set_ops(&at91_pm_ops); + else + pr_info("AT91: PM not supported, due to no SRAM allocated\n"); } void __init at91rm9200_pm_init(void) diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 86c0aa819d2590aae5af7146e5e3a4ebeb086e35..ecd875a91d5218281049b6b4b36924ddcc62b1d3 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -15,100 +15,16 @@ #include -#ifdef CONFIG_PM -extern void at91_pm_set_standby(void (*at91_standby)(void)); -#else -static inline void at91_pm_set_standby(void (*at91_standby)(void)) { } -#endif - -/* - * The AT91RM9200 goes into self-refresh mode with this command, and will - * terminate self-refresh automatically on the next SDRAM access. - * - * Self-refresh mode is exited as soon as a memory access is made, but we don't - * know for sure when that happens. However, we need to restore the low-power - * mode if it was enabled before going idle. Restoring low-power mode while - * still in self-refresh is "not recommended", but seems to work. - */ - -static inline void at91rm9200_standby(void) -{ - u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR); - - asm volatile( - "b 1f\n\t" - ".align 5\n\t" - "1: mcr p15, 0, %0, c7, c10, 4\n\t" - " str %0, [%1, %2]\n\t" - " str %3, [%1, %4]\n\t" - " mcr p15, 0, %0, c7, c0, 4\n\t" - " str %5, [%1, %2]" - : - : "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR), - "r" (1), "r" (AT91RM9200_SDRAMC_SRR), - "r" (lpr)); -} - -/* We manage both DDRAM/SDRAM controllers, we need more than one value to - * remember. - */ -static inline void at91_ddr_standby(void) -{ - /* Those two values allow us to delay self-refresh activation - * to the maximum. */ - u32 lpr0, lpr1 = 0; - u32 saved_lpr0, saved_lpr1 = 0; - - if (at91_ramc_base[1]) { - saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR); - lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB; - lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH; - } - - saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR); - lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB; - lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH; - - /* self-refresh mode now */ - at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0); - if (at91_ramc_base[1]) - at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1); - - cpu_do_idle(); - - at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); - if (at91_ramc_base[1]) - at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); -} - -/* We manage both DDRAM/SDRAM controllers, we need more than one value to - * remember. - */ -static inline void at91sam9_sdram_standby(void) -{ - u32 lpr0, lpr1 = 0; - u32 saved_lpr0, saved_lpr1 = 0; - - if (at91_ramc_base[1]) { - saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR); - lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB; - lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH; - } - - saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR); - lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB; - lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH; +#define AT91_MEMCTRL_MC 0 +#define AT91_MEMCTRL_SDRAMC 1 +#define AT91_MEMCTRL_DDRSDR 2 - /* self-refresh mode now */ - at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0); - if (at91_ramc_base[1]) - at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1); +#define AT91_PM_MEMTYPE_MASK 0x0f - cpu_do_idle(); +#define AT91_PM_MODE_OFFSET 4 +#define AT91_PM_MODE_MASK 0x01 +#define AT91_PM_MODE(x) (((x) & AT91_PM_MODE_MASK) << AT91_PM_MODE_OFFSET) - at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0); - if (at91_ramc_base[1]) - at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1); -} +#define AT91_PM_SLOW_CLOCK 0x01 #endif diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S deleted file mode 100644 index 931f0e302c035ecc33a138ec0bd61dc910321c66..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/pm_slowclock.S +++ /dev/null @@ -1,335 +0,0 @@ -/* - * arch/arm/mach-at91/pm_slow_clock.S - * - * Copyright (C) 2006 Savin Zlobec - * - * AT91SAM9 support: - * Copyright (C) 2007 Anti Sullin -#include -#include -#include - -/* - * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master - * clock during suspend by adjusting its prescalar and divisor. - * NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there - * are errata regarding adjusting the prescalar and divisor. - */ -#undef SLOWDOWN_MASTER_CLOCK - -pmc .req r0 -sdramc .req r1 -ramc1 .req r2 -memctrl .req r3 -tmp1 .req r4 -tmp2 .req r5 - -/* - * Wait until master clock is ready (after switching master clock source) - */ - .macro wait_mckrdy -1: ldr tmp1, [pmc, #AT91_PMC_SR] - tst tmp1, #AT91_PMC_MCKRDY - beq 1b - .endm - -/* - * Wait until master oscillator has stabilized. - */ - .macro wait_moscrdy -1: ldr tmp1, [pmc, #AT91_PMC_SR] - tst tmp1, #AT91_PMC_MOSCS - beq 1b - .endm - -/* - * Wait until PLLA has locked. - */ - .macro wait_pllalock -1: ldr tmp1, [pmc, #AT91_PMC_SR] - tst tmp1, #AT91_PMC_LOCKA - beq 1b - .endm - -/* - * Wait until PLLB has locked. - */ - .macro wait_pllblock -1: ldr tmp1, [pmc, #AT91_PMC_SR] - tst tmp1, #AT91_PMC_LOCKB - beq 1b - .endm - - .text - - .arm - -/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc, - * void __iomem *ramc1, int memctrl) - */ -ENTRY(at91_slow_clock) - /* Save registers on stack */ - stmfd sp!, {r4 - r12, lr} - - /* - * Register usage: - * R0 = Base address of AT91_PMC - * R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS) - * R2 = Base address of second RAM Controller or 0 if not present - * R3 = Memory controller - * R4 = temporary register - * R5 = temporary register - */ - - /* Drain write buffer */ - mov tmp1, #0 - mcr p15, 0, tmp1, c7, c10, 4 - - cmp memctrl, #AT91_MEMCTRL_MC - bne ddr_sr_enable - - /* - * at91rm9200 Memory controller - */ - /* Put SDRAM in self-refresh mode */ - mov tmp1, #1 - str tmp1, [sdramc, #AT91RM9200_SDRAMC_SRR] - b sdr_sr_done - - /* - * DDRSDR Memory controller - */ -ddr_sr_enable: - cmp memctrl, #AT91_MEMCTRL_DDRSDR - bne sdr_sr_enable - - /* LPDDR1 --> force DDR2 mode during self-refresh */ - ldr tmp1, [sdramc, #AT91_DDRSDRC_MDR] - str tmp1, .saved_sam9_mdr - bic tmp1, tmp1, #~AT91_DDRSDRC_MD - cmp tmp1, #AT91_DDRSDRC_MD_LOW_POWER_DDR - ldreq tmp1, [sdramc, #AT91_DDRSDRC_MDR] - biceq tmp1, tmp1, #AT91_DDRSDRC_MD - orreq tmp1, tmp1, #AT91_DDRSDRC_MD_DDR2 - streq tmp1, [sdramc, #AT91_DDRSDRC_MDR] - - /* prepare for DDRAM self-refresh mode */ - ldr tmp1, [sdramc, #AT91_DDRSDRC_LPR] - str tmp1, .saved_sam9_lpr - bic tmp1, #AT91_DDRSDRC_LPCB - orr tmp1, #AT91_DDRSDRC_LPCB_SELF_REFRESH - - /* figure out if we use the second ram controller */ - cmp ramc1, #0 - beq ddr_no_2nd_ctrl - - ldr tmp2, [ramc1, #AT91_DDRSDRC_MDR] - str tmp2, .saved_sam9_mdr1 - bic tmp2, tmp2, #~AT91_DDRSDRC_MD - cmp tmp2, #AT91_DDRSDRC_MD_LOW_POWER_DDR - ldreq tmp2, [ramc1, #AT91_DDRSDRC_MDR] - biceq tmp2, tmp2, #AT91_DDRSDRC_MD - orreq tmp2, tmp2, #AT91_DDRSDRC_MD_DDR2 - streq tmp2, [ramc1, #AT91_DDRSDRC_MDR] - - ldr tmp2, [ramc1, #AT91_DDRSDRC_LPR] - str tmp2, .saved_sam9_lpr1 - bic tmp2, #AT91_DDRSDRC_LPCB - orr tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH - - /* Enable DDRAM self-refresh mode */ - str tmp2, [ramc1, #AT91_DDRSDRC_LPR] -ddr_no_2nd_ctrl: - str tmp1, [sdramc, #AT91_DDRSDRC_LPR] - - b sdr_sr_done - - /* - * SDRAMC Memory controller - */ -sdr_sr_enable: - /* Enable SDRAM self-refresh mode */ - ldr tmp1, [sdramc, #AT91_SDRAMC_LPR] - str tmp1, .saved_sam9_lpr - - bic tmp1, #AT91_SDRAMC_LPCB - orr tmp1, #AT91_SDRAMC_LPCB_SELF_REFRESH - str tmp1, [sdramc, #AT91_SDRAMC_LPR] - -sdr_sr_done: - /* Save Master clock setting */ - ldr tmp1, [pmc, #AT91_PMC_MCKR] - str tmp1, .saved_mckr - - /* - * Set the Master clock source to slow clock - */ - bic tmp1, tmp1, #AT91_PMC_CSS - str tmp1, [pmc, #AT91_PMC_MCKR] - - wait_mckrdy - -#ifdef SLOWDOWN_MASTER_CLOCK - /* - * Set the Master Clock PRES and MDIV fields. - * - * See AT91RM9200 errata #27 and #28 for details. - */ - mov tmp1, #0 - str tmp1, [pmc, #AT91_PMC_MCKR] - - wait_mckrdy -#endif - - /* Save PLLA setting and disable it */ - ldr tmp1, [pmc, #AT91_CKGR_PLLAR] - str tmp1, .saved_pllar - - mov tmp1, #AT91_PMC_PLLCOUNT - orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */ - str tmp1, [pmc, #AT91_CKGR_PLLAR] - - /* Save PLLB setting and disable it */ - ldr tmp1, [pmc, #AT91_CKGR_PLLBR] - str tmp1, .saved_pllbr - - mov tmp1, #AT91_PMC_PLLCOUNT - str tmp1, [pmc, #AT91_CKGR_PLLBR] - - /* Turn off the main oscillator */ - ldr tmp1, [pmc, #AT91_CKGR_MOR] - bic tmp1, tmp1, #AT91_PMC_MOSCEN - orr tmp1, tmp1, #AT91_PMC_KEY - str tmp1, [pmc, #AT91_CKGR_MOR] - - /* Wait for interrupt */ - mcr p15, 0, tmp1, c7, c0, 4 - - /* Turn on the main oscillator */ - ldr tmp1, [pmc, #AT91_CKGR_MOR] - orr tmp1, tmp1, #AT91_PMC_MOSCEN - orr tmp1, tmp1, #AT91_PMC_KEY - str tmp1, [pmc, #AT91_CKGR_MOR] - - wait_moscrdy - - /* Restore PLLB setting */ - ldr tmp1, .saved_pllbr - str tmp1, [pmc, #AT91_CKGR_PLLBR] - - tst tmp1, #(AT91_PMC_MUL & 0xff0000) - bne 1f - tst tmp1, #(AT91_PMC_MUL & ~0xff0000) - beq 2f -1: - wait_pllblock -2: - - /* Restore PLLA setting */ - ldr tmp1, .saved_pllar - str tmp1, [pmc, #AT91_CKGR_PLLAR] - - tst tmp1, #(AT91_PMC_MUL & 0xff0000) - bne 3f - tst tmp1, #(AT91_PMC_MUL & ~0xff0000) - beq 4f -3: - wait_pllalock -4: - -#ifdef SLOWDOWN_MASTER_CLOCK - /* - * First set PRES if it was not 0, - * than set CSS and MDIV fields. - * - * See AT91RM9200 errata #27 and #28 for details. - */ - ldr tmp1, .saved_mckr - tst tmp1, #AT91_PMC_PRES - beq 2f - and tmp1, tmp1, #AT91_PMC_PRES - str tmp1, [pmc, #AT91_PMC_MCKR] - - wait_mckrdy -#endif - - /* - * Restore master clock setting - */ -2: ldr tmp1, .saved_mckr - str tmp1, [pmc, #AT91_PMC_MCKR] - - wait_mckrdy - - /* - * at91rm9200 Memory controller - * Do nothing - self-refresh is automatically disabled. - */ - cmp memctrl, #AT91_MEMCTRL_MC - beq ram_restored - - /* - * DDRSDR Memory controller - */ - cmp memctrl, #AT91_MEMCTRL_DDRSDR - bne sdr_en_restore - /* Restore MDR in case of LPDDR1 */ - ldr tmp1, .saved_sam9_mdr - str tmp1, [sdramc, #AT91_DDRSDRC_MDR] - /* Restore LPR on AT91 with DDRAM */ - ldr tmp1, .saved_sam9_lpr - str tmp1, [sdramc, #AT91_DDRSDRC_LPR] - - /* if we use the second ram controller */ - cmp ramc1, #0 - ldrne tmp2, .saved_sam9_mdr1 - strne tmp2, [ramc1, #AT91_DDRSDRC_MDR] - ldrne tmp2, .saved_sam9_lpr1 - strne tmp2, [ramc1, #AT91_DDRSDRC_LPR] - - b ram_restored - - /* - * SDRAMC Memory controller - */ -sdr_en_restore: - /* Restore LPR on AT91 with SDRAM */ - ldr tmp1, .saved_sam9_lpr - str tmp1, [sdramc, #AT91_SDRAMC_LPR] - -ram_restored: - /* Restore registers, and return */ - ldmfd sp!, {r4 - r12, pc} - - -.saved_mckr: - .word 0 - -.saved_pllar: - .word 0 - -.saved_pllbr: - .word 0 - -.saved_sam9_lpr: - .word 0 - -.saved_sam9_lpr1: - .word 0 - -.saved_sam9_mdr: - .word 0 - -.saved_sam9_mdr1: - .word 0 - -ENTRY(at91_slow_clock_sz) - .word .-at91_slow_clock diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S new file mode 100644 index 0000000000000000000000000000000000000000..bd22b2c8a05190423c84d71ca76b114a88c27571 --- /dev/null +++ b/arch/arm/mach-at91/pm_suspend.S @@ -0,0 +1,337 @@ +/* + * arch/arm/mach-at91/pm_slow_clock.S + * + * Copyright (C) 2006 Savin Zlobec + * + * AT91SAM9 support: + * Copyright (C) 2007 Anti Sullin +#include +#include +#include "pm.h" + +#define SRAMC_SELF_FRESH_ACTIVE 0x01 +#define SRAMC_SELF_FRESH_EXIT 0x00 + +pmc .req r0 +tmp1 .req r4 +tmp2 .req r5 + +/* + * Wait until master clock is ready (after switching master clock source) + */ + .macro wait_mckrdy +1: ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_MCKRDY + beq 1b + .endm + +/* + * Wait until master oscillator has stabilized. + */ + .macro wait_moscrdy +1: ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_MOSCS + beq 1b + .endm + +/* + * Wait until PLLA has locked. + */ + .macro wait_pllalock +1: ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_LOCKA + beq 1b + .endm + +/* + * Put the processor to enter the idle state + */ + .macro at91_cpu_idle + +#if defined(CONFIG_CPU_V7) + mov tmp1, #AT91_PMC_PCK + str tmp1, [pmc, #AT91_PMC_SCDR] + + dsb + + wfi @ Wait For Interrupt +#else + mcr p15, 0, tmp1, c7, c0, 4 +#endif + + .endm + + .text + + .arm + +/* + * void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *sdramc, + * void __iomem *ramc1, int memctrl) + * @input param: + * @r0: base address of AT91_PMC + * @r1: base address of SDRAM Controller (SDRAM, DDRSDR, or AT91_SYS) + * @r2: base address of second SDRAM Controller or 0 if not present + * @r3: pm information + */ +ENTRY(at91_pm_suspend_in_sram) + /* Save registers on stack */ + stmfd sp!, {r4 - r12, lr} + + /* Drain write buffer */ + mov tmp1, #0 + mcr p15, 0, tmp1, c7, c10, 4 + + str r0, .pmc_base + str r1, .sramc_base + str r2, .sramc1_base + + and r0, r3, #AT91_PM_MEMTYPE_MASK + str r0, .memtype + + lsr r0, r3, #AT91_PM_MODE_OFFSET + and r0, r0, #AT91_PM_MODE_MASK + str r0, .pm_mode + + /* Active the self-refresh mode */ + mov r0, #SRAMC_SELF_FRESH_ACTIVE + bl at91_sramc_self_refresh + + ldr r0, .pm_mode + tst r0, #AT91_PM_SLOW_CLOCK + beq skip_disable_main_clock + + ldr pmc, .pmc_base + + /* Save Master clock setting */ + ldr tmp1, [pmc, #AT91_PMC_MCKR] + str tmp1, .saved_mckr + + /* + * Set the Master clock source to slow clock + */ + bic tmp1, tmp1, #AT91_PMC_CSS + str tmp1, [pmc, #AT91_PMC_MCKR] + + wait_mckrdy + + /* Save PLLA setting and disable it */ + ldr tmp1, [pmc, #AT91_CKGR_PLLAR] + str tmp1, .saved_pllar + + mov tmp1, #AT91_PMC_PLLCOUNT + orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */ + str tmp1, [pmc, #AT91_CKGR_PLLAR] + + /* Turn off the main oscillator */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + bic tmp1, tmp1, #AT91_PMC_MOSCEN + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + +skip_disable_main_clock: + ldr pmc, .pmc_base + + /* Wait for interrupt */ + at91_cpu_idle + + ldr r0, .pm_mode + tst r0, #AT91_PM_SLOW_CLOCK + beq skip_enable_main_clock + + ldr pmc, .pmc_base + + /* Turn on the main oscillator */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + orr tmp1, tmp1, #AT91_PMC_MOSCEN + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + + wait_moscrdy + + /* Restore PLLA setting */ + ldr tmp1, .saved_pllar + str tmp1, [pmc, #AT91_CKGR_PLLAR] + + tst tmp1, #(AT91_PMC_MUL & 0xff0000) + bne 3f + tst tmp1, #(AT91_PMC_MUL & ~0xff0000) + beq 4f +3: + wait_pllalock +4: + + /* + * Restore master clock setting + */ + ldr tmp1, .saved_mckr + str tmp1, [pmc, #AT91_PMC_MCKR] + + wait_mckrdy + +skip_enable_main_clock: + /* Exit the self-refresh mode */ + mov r0, #SRAMC_SELF_FRESH_EXIT + bl at91_sramc_self_refresh + + /* Restore registers, and return */ + ldmfd sp!, {r4 - r12, pc} +ENDPROC(at91_pm_suspend_in_sram) + +/* + * void at91_sramc_self_refresh(unsigned int is_active) + * + * @input param: + * @r0: 1 - active self-refresh mode + * 0 - exit self-refresh mode + * register usage: + * @r1: memory type + * @r2: base address of the sram controller + */ + +ENTRY(at91_sramc_self_refresh) + ldr r1, .memtype + ldr r2, .sramc_base + + cmp r1, #AT91_MEMCTRL_MC + bne ddrc_sf + + /* + * at91rm9200 Memory controller + */ + + /* + * For exiting the self-refresh mode, do nothing, + * automatically exit the self-refresh mode. + */ + tst r0, #SRAMC_SELF_FRESH_ACTIVE + beq exit_sramc_sf + + /* Active SDRAM self-refresh mode */ + mov r3, #1 + str r3, [r2, #AT91RM9200_SDRAMC_SRR] + b exit_sramc_sf + +ddrc_sf: + cmp r1, #AT91_MEMCTRL_DDRSDR + bne sdramc_sf + + /* + * DDR Memory controller + */ + tst r0, #SRAMC_SELF_FRESH_ACTIVE + beq ddrc_exit_sf + + /* LPDDR1 --> force DDR2 mode during self-refresh */ + ldr r3, [r2, #AT91_DDRSDRC_MDR] + str r3, .saved_sam9_mdr + bic r3, r3, #~AT91_DDRSDRC_MD + cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR + ldreq r3, [r2, #AT91_DDRSDRC_MDR] + biceq r3, r3, #AT91_DDRSDRC_MD + orreq r3, r3, #AT91_DDRSDRC_MD_DDR2 + streq r3, [r2, #AT91_DDRSDRC_MDR] + + /* Active DDRC self-refresh mode */ + ldr r3, [r2, #AT91_DDRSDRC_LPR] + str r3, .saved_sam9_lpr + bic r3, r3, #AT91_DDRSDRC_LPCB + orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH + str r3, [r2, #AT91_DDRSDRC_LPR] + + /* If using the 2nd ddr controller */ + ldr r2, .sramc1_base + cmp r2, #0 + beq no_2nd_ddrc + + ldr r3, [r2, #AT91_DDRSDRC_MDR] + str r3, .saved_sam9_mdr1 + bic r3, r3, #~AT91_DDRSDRC_MD + cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR + ldreq r3, [r2, #AT91_DDRSDRC_MDR] + biceq r3, r3, #AT91_DDRSDRC_MD + orreq r3, r3, #AT91_DDRSDRC_MD_DDR2 + streq r3, [r2, #AT91_DDRSDRC_MDR] + + /* Active DDRC self-refresh mode */ + ldr r3, [r2, #AT91_DDRSDRC_LPR] + str r3, .saved_sam9_lpr1 + bic r3, r3, #AT91_DDRSDRC_LPCB + orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH + str r3, [r2, #AT91_DDRSDRC_LPR] + +no_2nd_ddrc: + b exit_sramc_sf + +ddrc_exit_sf: + /* Restore MDR in case of LPDDR1 */ + ldr r3, .saved_sam9_mdr + str r3, [r2, #AT91_DDRSDRC_MDR] + /* Restore LPR on AT91 with DDRAM */ + ldr r3, .saved_sam9_lpr + str r3, [r2, #AT91_DDRSDRC_LPR] + + /* If using the 2nd ddr controller */ + ldr r2, .sramc1_base + cmp r2, #0 + ldrne r3, .saved_sam9_mdr1 + strne r3, [r2, #AT91_DDRSDRC_MDR] + ldrne r3, .saved_sam9_lpr1 + strne r3, [r2, #AT91_DDRSDRC_LPR] + + b exit_sramc_sf + + /* + * SDRAMC Memory controller + */ +sdramc_sf: + tst r0, #SRAMC_SELF_FRESH_ACTIVE + beq sdramc_exit_sf + + /* Active SDRAMC self-refresh mode */ + ldr r3, [r2, #AT91_SDRAMC_LPR] + str r3, .saved_sam9_lpr + bic r3, r3, #AT91_SDRAMC_LPCB + orr r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH + str r3, [r2, #AT91_SDRAMC_LPR] + +sdramc_exit_sf: + ldr r3, .saved_sam9_lpr + str r3, [r2, #AT91_SDRAMC_LPR] + +exit_sramc_sf: + mov pc, lr +ENDPROC(at91_sramc_self_refresh) + +.pmc_base: + .word 0 +.sramc_base: + .word 0 +.sramc1_base: + .word 0 +.memtype: + .word 0 +.pm_mode: + .word 0 +.saved_mckr: + .word 0 +.saved_pllar: + .word 0 +.saved_sam9_lpr: + .word 0 +.saved_sam9_lpr1: + .word 0 +.saved_sam9_mdr: + .word 0 +.saved_sam9_mdr1: + .word 0 + +ENTRY(at91_pm_suspend_in_sram_sz) + .word .-at91_pm_suspend_in_sram diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c index 03dcb441f3d24662c3e7b00b8eea136426723a86..41d829d8e7d51045cc2fc38758302e13fd55b554 100644 --- a/arch/arm/mach-at91/sama5.c +++ b/arch/arm/mach-at91/sama5.c @@ -7,48 +7,48 @@ * Licensed under GPLv2 or later. */ -#include -#include -#include -#include -#include #include -#include #include -#include -#include -#include -#include - -#include -#include #include #include -#include +#include #include "generic.h" +#include "soc.h" -static int ksz8081_phy_fixup(struct phy_device *phy) -{ - int value; - - value = phy_read(phy, 0x16); - value &= ~0x20; - phy_write(phy, 0x16, value); - - return 0; -} +static const struct at91_soc sama5_socs[] = { + AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH, + "sama5d31", "sama5d3"), + AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH, + "sama5d33", "sama5d3"), + AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D34_EXID_MATCH, + "sama5d34", "sama5d3"), + AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D35_EXID_MATCH, + "sama5d35", "sama5d3"), + AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D36_EXID_MATCH, + "sama5d36", "sama5d3"), + AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D41_EXID_MATCH, + "sama5d41", "sama5d4"), + AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D42_EXID_MATCH, + "sama5d42", "sama5d4"), + AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D43_EXID_MATCH, + "sama5d43", "sama5d4"), + AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D44_EXID_MATCH, + "sama5d44", "sama5d4"), + { /* sentinel */ }, +}; static void __init sama5_dt_device_init(void) { - if (of_machine_is_compatible("atmel,sama5d4ek") && - IS_ENABLED(CONFIG_PHYLIB)) { - phy_register_fixup_for_id("fc028000.etherne:00", - ksz8081_phy_fixup); - } + struct soc_device *soc; + struct device *soc_dev = NULL; - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + soc = at91_soc_init(sama5_socs); + if (soc != NULL) + soc_dev = soc_device_to_device(soc); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); at91sam9x5_pm_init(); } @@ -59,44 +59,10 @@ static const char *sama5_dt_board_compat[] __initconst = { DT_MACHINE_START(sama5_dt, "Atmel SAMA5") /* Maintainer: Atmel */ - .map_io = at91_map_io, .init_machine = sama5_dt_device_init, .dt_compat = sama5_dt_board_compat, MACHINE_END -static struct map_desc at91_io_desc[] __initdata = { - { - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_MPDDRC), - .pfn = __phys_to_pfn(SAMA5D4_BASE_MPDDRC), - .length = SZ_512, - .type = MT_DEVICE, - }, - { - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_PMC), - .pfn = __phys_to_pfn(SAMA5D4_BASE_PMC), - .length = SZ_512, - .type = MT_DEVICE, - }, - { /* On sama5d4, we use USART3 as serial console */ - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_USART3), - .pfn = __phys_to_pfn(SAMA5D4_BASE_USART3), - .length = SZ_256, - .type = MT_DEVICE, - }, - { /* A bunch of peripheral with fine grained IO space */ - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_SYS2), - .pfn = __phys_to_pfn(SAMA5D4_BASE_SYS2), - .length = SZ_2K, - .type = MT_DEVICE, - }, -}; - -static void __init sama5_alt_map_io(void) -{ - at91_alt_map_io(); - iotable_init(at91_io_desc, ARRAY_SIZE(at91_io_desc)); -} - static const char *sama5_alt_dt_board_compat[] __initconst = { "atmel,sama5d4", NULL @@ -104,7 +70,6 @@ static const char *sama5_alt_dt_board_compat[] __initconst = { DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5") /* Maintainer: Atmel */ - .map_io = sama5_alt_map_io, .init_machine = sama5_dt_device_init, .dt_compat = sama5_alt_dt_board_compat, .l2c_aux_mask = ~0UL, diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c deleted file mode 100644 index 4e58bc90ed218291b30bfe44b4a5969a80134a40..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/setup.c +++ /dev/null @@ -1,330 +0,0 @@ -/* - * Copyright (C) 2007 Atmel Corporation. - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD - * - * Under GPLv2 - */ - -#define pr_fmt(fmt) "AT91: " fmt - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -#include "generic.h" -#include "pm.h" - -struct at91_socinfo at91_soc_initdata; -EXPORT_SYMBOL(at91_soc_initdata); - -static struct map_desc at91_io_desc __initdata __maybe_unused = { - .virtual = (unsigned long)AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, -}; - -static struct map_desc at91_alt_io_desc __initdata __maybe_unused = { - .virtual = (unsigned long)AT91_ALT_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_ALT_BASE_SYS), - .length = 24 * SZ_1K, - .type = MT_DEVICE, -}; - -static void __init soc_detect(u32 dbgu_base) -{ - u32 cidr, socid; - - cidr = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_CIDR); - socid = cidr & ~AT91_CIDR_VERSION; - - switch (socid) { - case ARCH_ID_AT91RM9200: - at91_soc_initdata.type = AT91_SOC_RM9200; - if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_UNKNOWN) - at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; - break; - - case ARCH_ID_AT91SAM9260: - at91_soc_initdata.type = AT91_SOC_SAM9260; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - break; - - case ARCH_ID_AT91SAM9261: - at91_soc_initdata.type = AT91_SOC_SAM9261; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - break; - - case ARCH_ID_AT91SAM9263: - at91_soc_initdata.type = AT91_SOC_SAM9263; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - break; - - case ARCH_ID_AT91SAM9G20: - at91_soc_initdata.type = AT91_SOC_SAM9G20; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - break; - - case ARCH_ID_AT91SAM9G45: - at91_soc_initdata.type = AT91_SOC_SAM9G45; - if (cidr == ARCH_ID_AT91SAM9G45ES) - at91_soc_initdata.subtype = AT91_SOC_SAM9G45ES; - break; - - case ARCH_ID_AT91SAM9RL64: - at91_soc_initdata.type = AT91_SOC_SAM9RL; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - break; - - case ARCH_ID_AT91SAM9X5: - at91_soc_initdata.type = AT91_SOC_SAM9X5; - break; - - case ARCH_ID_AT91SAM9N12: - at91_soc_initdata.type = AT91_SOC_SAM9N12; - break; - - case ARCH_ID_SAMA5: - at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID); - if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) { - at91_soc_initdata.type = AT91_SOC_SAMA5D3; - } - break; - } - - /* at91sam9g10 */ - if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { - at91_soc_initdata.type = AT91_SOC_SAM9G10; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - } - /* at91sam9xe */ - else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) { - at91_soc_initdata.type = AT91_SOC_SAM9260; - at91_soc_initdata.subtype = AT91_SOC_SAM9XE; - } - - if (!at91_soc_is_detected()) - return; - - at91_soc_initdata.cidr = cidr; - - /* sub version of soc */ - if (!at91_soc_initdata.exid) - at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID); - - if (at91_soc_initdata.type == AT91_SOC_SAM9G45) { - switch (at91_soc_initdata.exid) { - case ARCH_EXID_AT91SAM9M10: - at91_soc_initdata.subtype = AT91_SOC_SAM9M10; - break; - case ARCH_EXID_AT91SAM9G46: - at91_soc_initdata.subtype = AT91_SOC_SAM9G46; - break; - case ARCH_EXID_AT91SAM9M11: - at91_soc_initdata.subtype = AT91_SOC_SAM9M11; - break; - } - } - - if (at91_soc_initdata.type == AT91_SOC_SAM9X5) { - switch (at91_soc_initdata.exid) { - case ARCH_EXID_AT91SAM9G15: - at91_soc_initdata.subtype = AT91_SOC_SAM9G15; - break; - case ARCH_EXID_AT91SAM9G35: - at91_soc_initdata.subtype = AT91_SOC_SAM9G35; - break; - case ARCH_EXID_AT91SAM9X35: - at91_soc_initdata.subtype = AT91_SOC_SAM9X35; - break; - case ARCH_EXID_AT91SAM9G25: - at91_soc_initdata.subtype = AT91_SOC_SAM9G25; - break; - case ARCH_EXID_AT91SAM9X25: - at91_soc_initdata.subtype = AT91_SOC_SAM9X25; - break; - } - } - - if (at91_soc_initdata.type == AT91_SOC_SAMA5D3) { - switch (at91_soc_initdata.exid) { - case ARCH_EXID_SAMA5D31: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D31; - break; - case ARCH_EXID_SAMA5D33: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D33; - break; - case ARCH_EXID_SAMA5D34: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D34; - break; - case ARCH_EXID_SAMA5D35: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D35; - break; - case ARCH_EXID_SAMA5D36: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D36; - break; - } - } -} - -static void __init alt_soc_detect(u32 dbgu_base) -{ - u32 cidr, socid; - - /* SoC ID */ - cidr = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_CIDR); - socid = cidr & ~AT91_CIDR_VERSION; - - switch (socid) { - case ARCH_ID_SAMA5: - at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID); - if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) { - at91_soc_initdata.type = AT91_SOC_SAMA5D3; - } else if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D4) { - at91_soc_initdata.type = AT91_SOC_SAMA5D4; - } - break; - } - - if (!at91_soc_is_detected()) - return; - - at91_soc_initdata.cidr = cidr; - - /* sub version of soc */ - if (!at91_soc_initdata.exid) - at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID); - - if (at91_soc_initdata.type == AT91_SOC_SAMA5D4) { - switch (at91_soc_initdata.exid) { - case ARCH_EXID_SAMA5D41: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D41; - break; - case ARCH_EXID_SAMA5D42: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D42; - break; - case ARCH_EXID_SAMA5D43: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D43; - break; - case ARCH_EXID_SAMA5D44: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D44; - break; - } - } -} - -static const char *soc_name[] = { - [AT91_SOC_RM9200] = "at91rm9200", - [AT91_SOC_SAM9260] = "at91sam9260", - [AT91_SOC_SAM9261] = "at91sam9261", - [AT91_SOC_SAM9263] = "at91sam9263", - [AT91_SOC_SAM9G10] = "at91sam9g10", - [AT91_SOC_SAM9G20] = "at91sam9g20", - [AT91_SOC_SAM9G45] = "at91sam9g45", - [AT91_SOC_SAM9RL] = "at91sam9rl", - [AT91_SOC_SAM9X5] = "at91sam9x5", - [AT91_SOC_SAM9N12] = "at91sam9n12", - [AT91_SOC_SAMA5D3] = "sama5d3", - [AT91_SOC_SAMA5D4] = "sama5d4", - [AT91_SOC_UNKNOWN] = "Unknown", -}; - -const char *at91_get_soc_type(struct at91_socinfo *c) -{ - return soc_name[c->type]; -} -EXPORT_SYMBOL(at91_get_soc_type); - -static const char *soc_subtype_name[] = { - [AT91_SOC_RM9200_BGA] = "at91rm9200 BGA", - [AT91_SOC_RM9200_PQFP] = "at91rm9200 PQFP", - [AT91_SOC_SAM9XE] = "at91sam9xe", - [AT91_SOC_SAM9G45ES] = "at91sam9g45es", - [AT91_SOC_SAM9M10] = "at91sam9m10", - [AT91_SOC_SAM9G46] = "at91sam9g46", - [AT91_SOC_SAM9M11] = "at91sam9m11", - [AT91_SOC_SAM9G15] = "at91sam9g15", - [AT91_SOC_SAM9G35] = "at91sam9g35", - [AT91_SOC_SAM9X35] = "at91sam9x35", - [AT91_SOC_SAM9G25] = "at91sam9g25", - [AT91_SOC_SAM9X25] = "at91sam9x25", - [AT91_SOC_SAMA5D31] = "sama5d31", - [AT91_SOC_SAMA5D33] = "sama5d33", - [AT91_SOC_SAMA5D34] = "sama5d34", - [AT91_SOC_SAMA5D35] = "sama5d35", - [AT91_SOC_SAMA5D36] = "sama5d36", - [AT91_SOC_SAMA5D41] = "sama5d41", - [AT91_SOC_SAMA5D42] = "sama5d42", - [AT91_SOC_SAMA5D43] = "sama5d43", - [AT91_SOC_SAMA5D44] = "sama5d44", - [AT91_SOC_SUBTYPE_NONE] = "None", - [AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown", -}; - -const char *at91_get_soc_subtype(struct at91_socinfo *c) -{ - return soc_subtype_name[c->subtype]; -} -EXPORT_SYMBOL(at91_get_soc_subtype); - -void __init at91_map_io(void) -{ - /* Map peripherals */ - iotable_init(&at91_io_desc, 1); - - at91_soc_initdata.type = AT91_SOC_UNKNOWN; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN; - - soc_detect(AT91_BASE_DBGU0); - if (!at91_soc_is_detected()) - soc_detect(AT91_BASE_DBGU1); - - if (!at91_soc_is_detected()) - panic(pr_fmt("Impossible to detect the SOC type")); - - pr_info("Detected soc type: %s\n", - at91_get_soc_type(&at91_soc_initdata)); - if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE) - pr_info("Detected soc subtype: %s\n", - at91_get_soc_subtype(&at91_soc_initdata)); -} - -void __init at91_alt_map_io(void) -{ - /* Map peripherals */ - iotable_init(&at91_alt_io_desc, 1); - - at91_soc_initdata.type = AT91_SOC_UNKNOWN; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN; - - alt_soc_detect(AT91_BASE_DBGU2); - if (!at91_soc_is_detected()) - panic("AT91: Impossible to detect the SOC type"); - - pr_info("AT91: Detected soc type: %s\n", - at91_get_soc_type(&at91_soc_initdata)); - if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE) - pr_info("AT91: Detected soc subtype: %s\n", - at91_get_soc_subtype(&at91_soc_initdata)); -} - -void __iomem *at91_matrix_base; -EXPORT_SYMBOL_GPL(at91_matrix_base); - -void __init at91_ioremap_matrix(u32 base_addr) -{ - at91_matrix_base = ioremap(base_addr, 512); - if (!at91_matrix_base) - panic(pr_fmt("Impossible to ioremap at91_matrix_base\n")); -} diff --git a/arch/arm/mach-at91/soc.c b/arch/arm/mach-at91/soc.c new file mode 100644 index 0000000000000000000000000000000000000000..54343ffa3e53352ba142c7ed1894f00f37193bc3 --- /dev/null +++ b/arch/arm/mach-at91/soc.c @@ -0,0 +1,97 @@ +/* + * Copyright (C) 2015 Atmel + * + * Alexandre Belloni +#include +#include +#include +#include +#include + +#include "soc.h" + +#define AT91_DBGU_CIDR 0x40 +#define AT91_DBGU_CIDR_VERSION(x) ((x) & 0x1f) +#define AT91_DBGU_CIDR_EXT BIT(31) +#define AT91_DBGU_CIDR_MATCH_MASK 0x7fffffe0 +#define AT91_DBGU_EXID 0x44 + +struct soc_device * __init at91_soc_init(const struct at91_soc *socs) +{ + struct soc_device_attribute *soc_dev_attr; + const struct at91_soc *soc; + struct soc_device *soc_dev; + struct device_node *np; + void __iomem *regs; + u32 cidr, exid; + + np = of_find_compatible_node(NULL, NULL, "atmel,at91rm9200-dbgu"); + if (!np) + np = of_find_compatible_node(NULL, NULL, + "atmel,at91sam9260-dbgu"); + + if (!np) { + pr_warn("Could not find DBGU node"); + return NULL; + } + + regs = of_iomap(np, 0); + of_node_put(np); + + if (!regs) { + pr_warn("Could not map DBGU iomem range"); + return NULL; + } + + cidr = readl(regs + AT91_DBGU_CIDR); + exid = readl(regs + AT91_DBGU_EXID); + + iounmap(regs); + + for (soc = socs; soc->name; soc++) { + if (soc->cidr_match != (cidr & AT91_DBGU_CIDR_MATCH_MASK)) + continue; + + if (!(cidr & AT91_DBGU_CIDR_EXT) || soc->exid_match == exid) + break; + } + + if (!soc->name) { + pr_warn("Could not find matching SoC description\n"); + return NULL; + } + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return NULL; + + soc_dev_attr->family = soc->family; + soc_dev_attr->soc_id = soc->name; + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X", + AT91_DBGU_CIDR_VERSION(cidr)); + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr); + pr_warn("Could not register SoC device\n"); + return NULL; + } + + if (soc->family) + pr_info("Detected SoC family: %s\n", soc->family); + pr_info("Detected SoC: %s, revision %X\n", soc->name, + AT91_DBGU_CIDR_VERSION(cidr)); + + return soc_dev; +} diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h new file mode 100644 index 0000000000000000000000000000000000000000..be23c400596b4eff8ac68600a208a4b3d6b5a55b --- /dev/null +++ b/arch/arm/mach-at91/soc.h @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2015 Atmel + * + * Boris Brezillon + +struct at91_soc { + u32 cidr_match; + u32 exid_match; + const char *name; + const char *family; +}; + +#define AT91_SOC(__cidr, __exid, __name, __family) \ + { \ + .cidr_match = (__cidr), \ + .exid_match = (__exid), \ + .name = (__name), \ + .family = (__family), \ + } + +struct soc_device * __init +at91_soc_init(const struct at91_soc *socs); + +#define AT91RM9200_CIDR_MATCH 0x09290780 + +#define AT91SAM9260_CIDR_MATCH 0x019803a0 +#define AT91SAM9261_CIDR_MATCH 0x019703a0 +#define AT91SAM9263_CIDR_MATCH 0x019607a0 +#define AT91SAM9G20_CIDR_MATCH 0x019905a0 +#define AT91SAM9RL64_CIDR_MATCH 0x019b03a0 +#define AT91SAM9G45_CIDR_MATCH 0x019b05a0 +#define AT91SAM9X5_CIDR_MATCH 0x019a05a0 +#define AT91SAM9N12_CIDR_MATCH 0x019a07a0 + +#define AT91SAM9M11_EXID_MATCH 0x00000001 +#define AT91SAM9M10_EXID_MATCH 0x00000002 +#define AT91SAM9G46_EXID_MATCH 0x00000003 +#define AT91SAM9G45_EXID_MATCH 0x00000004 + +#define AT91SAM9G15_EXID_MATCH 0x00000000 +#define AT91SAM9G35_EXID_MATCH 0x00000001 +#define AT91SAM9X35_EXID_MATCH 0x00000002 +#define AT91SAM9G25_EXID_MATCH 0x00000003 +#define AT91SAM9X25_EXID_MATCH 0x00000004 + +#define AT91SAM9CN12_EXID_MATCH 0x00000005 +#define AT91SAM9N12_EXID_MATCH 0x00000006 +#define AT91SAM9CN11_EXID_MATCH 0x00000009 + +#define AT91SAM9XE128_CIDR_MATCH 0x329973a0 +#define AT91SAM9XE256_CIDR_MATCH 0x329a93a0 +#define AT91SAM9XE512_CIDR_MATCH 0x329aa3a0 + +#define SAMA5D3_CIDR_MATCH 0x0a5c07c0 +#define SAMA5D31_EXID_MATCH 0x00444300 +#define SAMA5D33_EXID_MATCH 0x00414300 +#define SAMA5D34_EXID_MATCH 0x00414301 +#define SAMA5D35_EXID_MATCH 0x00584300 +#define SAMA5D36_EXID_MATCH 0x00004301 + +#define SAMA5D4_CIDR_MATCH 0x0a5c07c0 +#define SAMA5D41_EXID_MATCH 0x00000001 +#define SAMA5D42_EXID_MATCH 0x00000002 +#define SAMA5D43_EXID_MATCH 0x00000003 +#define SAMA5D44_EXID_MATCH 0x00000004 + +#endif /* __AT91_SOC_H */ diff --git a/arch/arm/mach-bcm/bcm_cygnus.c b/arch/arm/mach-bcm/bcm_cygnus.c index 30dc58be51b8e70f49074ee47523e534d6676337..7ae894c7849b7cde3bc61b952868652b0fc29c22 100644 --- a/arch/arm/mach-bcm/bcm_cygnus.c +++ b/arch/arm/mach-bcm/bcm_cygnus.c @@ -13,7 +13,7 @@ #include -static const char const *bcm_cygnus_dt_compat[] = { +static const char * const bcm_cygnus_dt_compat[] __initconst = { "brcm,cygnus", NULL, }; diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c index fb38c726e9877d5472608cedf237913cf0efa23f..f46b78dd613655e0b2ec2acdfea7f9ccdeee710d 100644 --- a/arch/arm/mach-cns3xxx/pm.c +++ b/arch/arm/mach-cns3xxx/pm.c @@ -73,7 +73,6 @@ static void cns3xxx_pwr_soft_rst_force(unsigned int block) __raw_writel(reg, PM_SOFT_RST_REG); } -EXPORT_SYMBOL(cns3xxx_pwr_soft_rst_force); void cns3xxx_pwr_soft_rst(unsigned int block) { diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index cd30f6f5f2ff15723a2abae07b471b03f65f9b11..dd8f5312b2c0e5d15e38b42dbaaee88a4718ce61 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -200,17 +200,6 @@ config DA850_UI_SD_VIDEO_PORT endchoice -config DA850_WL12XX - bool "AM18x wl1271 daughter board" - depends on MACH_DAVINCI_DA850_EVM - help - The wl1271 daughter card for AM18x EVMs is a combo wireless - connectivity add-on card, based on the LS Research TiWi module with - Texas Instruments' wl1271 solution. - Say Y if you want to use a wl1271 expansion card connected to the - AM18x EVM. - - config MACH_MITYOMAPL138 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" depends on ARCH_DAVINCI_DA850 diff --git a/arch/arm/mach-davinci/asp.h b/arch/arm/mach-davinci/asp.h index d9b2acd12393ab0e8f4968403ce5ad901553d146..1128e1d8e4b46690f3af8909c5e5d6829d642219 100644 --- a/arch/arm/mach-davinci/asp.h +++ b/arch/arm/mach-davinci/asp.h @@ -21,6 +21,9 @@ /* Bases of da830 McASP1 register banks */ #define DAVINCI_DA830_MCASP1_REG_BASE 0x01D04000 +/* Bases of da830 McASP2 register banks */ +#define DAVINCI_DA830_MCASP2_REG_BASE 0x01D08000 + /* EDMA channels of dm644x and dm355 */ #define DAVINCI_DMA_ASP0_TX 2 #define DAVINCI_DMA_ASP0_RX 3 @@ -40,6 +43,10 @@ #define DAVINCI_DA830_DMA_MCASP1_AREVT 2 #define DAVINCI_DA830_DMA_MCASP1_AXEVT 3 +/* EDMA channels of da830 McASP2 */ +#define DAVINCI_DA830_DMA_MCASP2_AREVT 4 +#define DAVINCI_DA830_DMA_MCASP2_AXEVT 5 + /* Interrupts */ #define DAVINCI_ASP0_RX_INT IRQ_MBRINT #define DAVINCI_ASP0_TX_INT IRQ_MBXINT diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 6b5a97da9fe39da65df47b5c9bbe8fd1359666d8..1ed545cc2b83452954cc4a2217ac1be324237775 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -38,7 +38,6 @@ #include #include #include -#include #include #include @@ -60,9 +59,6 @@ #define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0) #define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1) -#define DA850_WLAN_EN GPIO_TO_PIN(6, 9) -#define DA850_WLAN_IRQ GPIO_TO_PIN(6, 10) - #define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6) static struct mtd_partition da850evm_spiflash_part[] = { @@ -1343,109 +1339,6 @@ static __init void da850_vpif_init(void) static __init void da850_vpif_init(void) {} #endif -#ifdef CONFIG_DA850_WL12XX - -static void wl12xx_set_power(int index, bool power_on) -{ - static bool power_state; - - pr_debug("Powering %s wl12xx", power_on ? "on" : "off"); - - if (power_on == power_state) - return; - power_state = power_on; - - if (power_on) { - /* Power up sequence required for wl127x devices */ - gpio_set_value(DA850_WLAN_EN, 1); - usleep_range(15000, 15000); - gpio_set_value(DA850_WLAN_EN, 0); - usleep_range(1000, 1000); - gpio_set_value(DA850_WLAN_EN, 1); - msleep(70); - } else { - gpio_set_value(DA850_WLAN_EN, 0); - } -} - -static struct davinci_mmc_config da850_wl12xx_mmc_config = { - .set_power = wl12xx_set_power, - .wires = 4, - .max_freq = 25000000, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE | - MMC_CAP_POWER_OFF_CARD, -}; - -static const short da850_wl12xx_pins[] __initconst = { - DA850_MMCSD1_DAT_0, DA850_MMCSD1_DAT_1, DA850_MMCSD1_DAT_2, - DA850_MMCSD1_DAT_3, DA850_MMCSD1_CLK, DA850_MMCSD1_CMD, - DA850_GPIO6_9, DA850_GPIO6_10, - -1 -}; - -static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = { - .irq = -1, - .board_ref_clock = WL12XX_REFCLOCK_38, - .platform_quirks = WL12XX_PLATFORM_QUIRK_EDGE_IRQ, -}; - -static __init int da850_wl12xx_init(void) -{ - int ret; - - ret = davinci_cfg_reg_list(da850_wl12xx_pins); - if (ret) { - pr_err("wl12xx/mmc mux setup failed: %d\n", ret); - goto exit; - } - - ret = da850_register_mmcsd1(&da850_wl12xx_mmc_config); - if (ret) { - pr_err("wl12xx/mmc registration failed: %d\n", ret); - goto exit; - } - - ret = gpio_request_one(DA850_WLAN_EN, GPIOF_OUT_INIT_LOW, "wl12xx_en"); - if (ret) { - pr_err("Could not request wl12xx enable gpio: %d\n", ret); - goto exit; - } - - ret = gpio_request_one(DA850_WLAN_IRQ, GPIOF_IN, "wl12xx_irq"); - if (ret) { - pr_err("Could not request wl12xx irq gpio: %d\n", ret); - goto free_wlan_en; - } - - da850_wl12xx_wlan_data.irq = gpio_to_irq(DA850_WLAN_IRQ); - - ret = wl12xx_set_platform_data(&da850_wl12xx_wlan_data); - if (ret) { - pr_err("Could not set wl12xx data: %d\n", ret); - goto free_wlan_irq; - } - - return 0; - -free_wlan_irq: - gpio_free(DA850_WLAN_IRQ); - -free_wlan_en: - gpio_free(DA850_WLAN_EN); - -exit: - return ret; -} - -#else /* CONFIG_DA850_WL12XX */ - -static __init int da850_wl12xx_init(void) -{ - return 0; -} - -#endif /* CONFIG_DA850_WL12XX */ - #define DA850EVM_SATA_REFCLKPN_RATE (100 * 1000 * 1000) static __init void da850_evm_init(void) @@ -1502,11 +1395,6 @@ static __init void da850_evm_init(void) if (ret) pr_warn("%s: MMCSD0 registration failed: %d\n", __func__, ret); - - ret = da850_wl12xx_init(); - if (ret) - pr_warn("%s: WL12xx initialization failed: %d\n", - __func__, ret); } davinci_serial_init(da8xx_serial_device); diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c index e365c1bb1265334e9684a004097fd2a1fb5c4797..306ebc51599a2bb1e6e83983aa3e71017840c8ce 100644 --- a/arch/arm/mach-davinci/cpuidle.c +++ b/arch/arm/mach-davinci/cpuidle.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index b85b781b05fdf7d89d7a3c256727ea9024b6d0d8..ddfdd820e6f2b99f6bfa80a51a287255794d74d5 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -463,16 +463,23 @@ static struct resource da830_mcasp1_resources[] = { }, /* TX event */ { + .name = "tx", .start = DAVINCI_DA830_DMA_MCASP1_AXEVT, .end = DAVINCI_DA830_DMA_MCASP1_AXEVT, .flags = IORESOURCE_DMA, }, /* RX event */ { + .name = "rx", .start = DAVINCI_DA830_DMA_MCASP1_AREVT, .end = DAVINCI_DA830_DMA_MCASP1_AREVT, .flags = IORESOURCE_DMA, }, + { + .name = "common", + .start = IRQ_DA8XX_MCASPINT, + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device da830_mcasp1_device = { @@ -482,6 +489,41 @@ static struct platform_device da830_mcasp1_device = { .resource = da830_mcasp1_resources, }; +static struct resource da830_mcasp2_resources[] = { + { + .name = "mpu", + .start = DAVINCI_DA830_MCASP2_REG_BASE, + .end = DAVINCI_DA830_MCASP2_REG_BASE + (SZ_1K * 12) - 1, + .flags = IORESOURCE_MEM, + }, + /* TX event */ + { + .name = "tx", + .start = DAVINCI_DA830_DMA_MCASP2_AXEVT, + .end = DAVINCI_DA830_DMA_MCASP2_AXEVT, + .flags = IORESOURCE_DMA, + }, + /* RX event */ + { + .name = "rx", + .start = DAVINCI_DA830_DMA_MCASP2_AREVT, + .end = DAVINCI_DA830_DMA_MCASP2_AREVT, + .flags = IORESOURCE_DMA, + }, + { + .name = "common", + .start = IRQ_DA8XX_MCASPINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device da830_mcasp2_device = { + .name = "davinci-mcasp", + .id = 2, + .num_resources = ARRAY_SIZE(da830_mcasp2_resources), + .resource = da830_mcasp2_resources, +}; + static struct resource da850_mcasp_resources[] = { { .name = "mpu", @@ -491,16 +533,23 @@ static struct resource da850_mcasp_resources[] = { }, /* TX event */ { + .name = "tx", .start = DAVINCI_DA8XX_DMA_MCASP0_AXEVT, .end = DAVINCI_DA8XX_DMA_MCASP0_AXEVT, .flags = IORESOURCE_DMA, }, /* RX event */ { + .name = "rx", .start = DAVINCI_DA8XX_DMA_MCASP0_AREVT, .end = DAVINCI_DA8XX_DMA_MCASP0_AREVT, .flags = IORESOURCE_DMA, }, + { + .name = "common", + .start = IRQ_DA8XX_MCASPINT, + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device da850_mcasp_device = { @@ -512,14 +561,31 @@ static struct platform_device da850_mcasp_device = { void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata) { - /* DA830/OMAP-L137 has 3 instances of McASP */ - if (cpu_is_davinci_da830() && id == 1) { - da830_mcasp1_device.dev.platform_data = pdata; - platform_device_register(&da830_mcasp1_device); - } else if (cpu_is_davinci_da850()) { - da850_mcasp_device.dev.platform_data = pdata; - platform_device_register(&da850_mcasp_device); + struct platform_device *pdev; + + switch (id) { + case 0: + /* Valid for DA830/OMAP-L137 or DA850/OMAP-L138 */ + pdev = &da850_mcasp_device; + break; + case 1: + /* Valid for DA830/OMAP-L137 only */ + if (!cpu_is_davinci_da830()) + return; + pdev = &da830_mcasp1_device; + break; + case 2: + /* Valid for DA830/OMAP-L137 only */ + if (!cpu_is_davinci_da830()) + return; + pdev = &da830_mcasp2_device; + break; + default: + return; } + + pdev->dev.platform_data = pdata; + platform_device_register(pdev); } static struct resource da8xx_pruss_resources[] = { diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 6c3bbea7d77d8f8f2432ec9321936cedf2e942f5..3f842bb266d6ebe6226209433dca0b805398afaa 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -493,7 +493,6 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { [IRQ_DM646X_EMACMISCINT] = 7, [IRQ_DM646X_MCASP0TXINT] = 7, [IRQ_DM646X_MCASP0RXINT] = 7, - [IRQ_AEMIFINT] = 7, [IRQ_DM646X_RESERVED_3] = 7, [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */ [IRQ_TINT0_TINT34] = 7, /* clocksource */ @@ -610,19 +609,31 @@ static struct resource dm646x_mcasp0_resources[] = { .end = DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1, .flags = IORESOURCE_MEM, }, - /* first TX, then RX */ { + .name = "tx", .start = DAVINCI_DM646X_DMA_MCASP0_AXEVT0, .end = DAVINCI_DM646X_DMA_MCASP0_AXEVT0, .flags = IORESOURCE_DMA, }, { + .name = "rx", .start = DAVINCI_DM646X_DMA_MCASP0_AREVT0, .end = DAVINCI_DM646X_DMA_MCASP0_AREVT0, .flags = IORESOURCE_DMA, }, + { + .name = "tx", + .start = IRQ_DM646X_MCASP0TXINT, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = IRQ_DM646X_MCASP0RXINT, + .flags = IORESOURCE_IRQ, + }, }; +/* DIT mode only, rx is not supported */ static struct resource dm646x_mcasp1_resources[] = { { .name = "mpu", @@ -630,17 +641,16 @@ static struct resource dm646x_mcasp1_resources[] = { .end = DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1, .flags = IORESOURCE_MEM, }, - /* DIT mode, only TX event */ { + .name = "tx", .start = DAVINCI_DM646X_DMA_MCASP1_AXEVT1, .end = DAVINCI_DM646X_DMA_MCASP1_AXEVT1, .flags = IORESOURCE_DMA, }, - /* DIT mode, dummy entry */ { - .start = -1, - .end = -1, - .flags = IORESOURCE_DMA, + .name = "tx", + .start = IRQ_DM646X_MCASP1TXINT, + .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index 354af71798dcd4e09206ae6e82bfa862b4ccb0a1..edb2ca62321ae141ed6e5a9afe910e88b423bbe9 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -129,8 +129,8 @@ #define IRQ_DM646X_EMACMISCINT 27 #define IRQ_DM646X_MCASP0TXINT 28 #define IRQ_DM646X_MCASP0RXINT 29 +#define IRQ_DM646X_MCASP1TXINT 30 #define IRQ_DM646X_RESERVED_3 31 -#define IRQ_DM646X_MCASP1TXINT 32 #define IRQ_DM646X_VLQINT 38 #define IRQ_DM646X_UARTINT2 42 #define IRQ_DM646X_SPINT0 43 diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 603820e5aba79bc17bab7acd56f87a69af087c45..81064cd61a0a9e72536d6dd6df56555bae352d61 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -123,7 +123,7 @@ config SOC_EXYNOS5800 config EXYNOS5420_MCPM bool "Exynos5420 Multi-Cluster PM support" depends on MCPM && SOC_EXYNOS5420 - select ARM_CCI + select ARM_CCI400_PORT_CTRL select ARM_CPU_SUSPEND help This is needed to provide CPU and cluster power management diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index f70eca7ee705fd26490d3ce7bbdc1988cbdf8752..5f5cd562c593ef5f6a9224254c146e7d3d0136a3 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -126,6 +126,12 @@ enum { void exynos_firmware_init(void); +/* CPU BOOT mode flag for Exynos3250 SoC bootloader */ +#define C2_STATE (1 << 3) + +void exynos_set_boot_flag(unsigned int cpu, unsigned int mode); +void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode); + extern u32 exynos_get_eint_wake_mask(void); #ifdef CONFIG_PM_SLEEP @@ -153,6 +159,8 @@ extern void exynos_enter_aftr(void); extern struct cpuidle_exynos_data cpuidle_coupled_exynos_data; +extern void exynos_set_delayed_reset_assertion(bool enable); + extern void s5p_init_cpu(void __iomem *cpuid_addr); extern unsigned int samsung_rev(void); extern void __iomem *cpu_boot_reg_base(void); diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index f44c2e05c82e36ae3598ebf7ffe60e54a14235cc..5917a30eee33f286c80708dfb84cdd610bd2dd9d 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -166,6 +166,33 @@ static void __init exynos_init_io(void) exynos_map_io(); } +/* + * Set or clear the USE_DELAYED_RESET_ASSERTION option. Used by smp code + * and suspend. + * + * This is necessary only on Exynos4 SoCs. When system is running + * USE_DELAYED_RESET_ASSERTION should be set so the ARM CLK clock down + * feature could properly detect global idle state when secondary CPU is + * powered down. + * + * However this should not be set when such system is going into suspend. + */ +void exynos_set_delayed_reset_assertion(bool enable) +{ + if (of_machine_is_compatible("samsung,exynos4")) { + unsigned int tmp, core_id; + + for (core_id = 0; core_id < num_possible_cpus(); core_id++) { + tmp = pmu_raw_readl(EXYNOS_ARM_CORE_OPTION(core_id)); + if (enable) + tmp |= S5P_USE_DELAYED_RESET_ASSERTION; + else + tmp &= ~(S5P_USE_DELAYED_RESET_ASSERTION); + pmu_raw_writel(tmp, EXYNOS_ARM_CORE_OPTION(core_id)); + } + } +} + /* * Apparently, these SoCs are not able to wake-up from suspend using * the PMU. Too bad. Should they suddenly become capable of such a @@ -206,7 +233,7 @@ static void __init exynos_dt_machine_init(void) if (!IS_ENABLED(CONFIG_SMP)) exynos_sysram_init(); -#ifdef CONFIG_ARM_EXYNOS_CPUIDLE +#if defined(CONFIG_SMP) && defined(CONFIG_ARM_EXYNOS_CPUIDLE) if (of_machine_is_compatible("samsung,exynos4210")) exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data; #endif @@ -214,6 +241,7 @@ static void __init exynos_dt_machine_init(void) of_machine_is_compatible("samsung,exynos4212") || (of_machine_is_compatible("samsung,exynos4412") && of_machine_is_compatible("samsung,trats2")) || + of_machine_is_compatible("samsung,exynos3250") || of_machine_is_compatible("samsung,exynos5250")) platform_device_register(&exynos_cpuidle); diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index 4791a3cc00f9d40e71c474d6130c02697ebcd090..1bd35763f12ec04d712ace47f0f88bd2f9c95c89 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -48,7 +48,13 @@ static int exynos_do_idle(unsigned long mode) __raw_writel(virt_to_phys(exynos_cpu_resume_ns), sysram_ns_base_addr + 0x24); __raw_writel(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20); - exynos_smc(SMC_CMD_CPU0AFTR, 0, 0, 0); + if (soc_is_exynos3250()) { + exynos_smc(SMC_CMD_SAVE, OP_TYPE_CORE, + SMC_POWERSTATE_IDLE, 0); + exynos_smc(SMC_CMD_SHUTDOWN, OP_TYPE_CLUSTER, + SMC_POWERSTATE_IDLE, 0); + } else + exynos_smc(SMC_CMD_CPU0AFTR, 0, 0, 0); break; case FW_DO_IDLE_SLEEP: exynos_smc(SMC_CMD_SLEEP, 0, 0, 0); @@ -206,3 +212,28 @@ void __init exynos_firmware_init(void) outer_cache.configure = exynos_l2_configure; } } + +#define REG_CPU_STATE_ADDR (sysram_ns_base_addr + 0x28) +#define BOOT_MODE_MASK 0x1f + +void exynos_set_boot_flag(unsigned int cpu, unsigned int mode) +{ + unsigned int tmp; + + tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4); + + if (mode & BOOT_MODE_MASK) + tmp &= ~BOOT_MODE_MASK; + + tmp |= mode; + __raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4); +} + +void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode) +{ + unsigned int tmp; + + tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4); + tmp &= ~mode; + __raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4); +} diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c index b0d3c2e876fbe9227d651b8c2bcc86de22fc0fc7..9bdf54795f05de26283881729a4427bd781ea2eb 100644 --- a/arch/arm/mach-exynos/mcpm-exynos.c +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -61,25 +61,7 @@ static void __iomem *ns_sram_base_addr; : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ "r9", "r10", "lr", "memory") -/* - * We can't use regular spinlocks. In the switcher case, it is possible - * for an outbound CPU to call power_down() after its inbound counterpart - * is already live using the same logical CPU number which trips lockdep - * debugging. - */ -static arch_spinlock_t exynos_mcpm_lock = __ARCH_SPIN_LOCK_UNLOCKED; -static int -cpu_use_count[EXYNOS5420_CPUS_PER_CLUSTER][EXYNOS5420_NR_CLUSTERS]; - -#define exynos_cluster_usecnt(cluster) \ - (cpu_use_count[0][cluster] + \ - cpu_use_count[1][cluster] + \ - cpu_use_count[2][cluster] + \ - cpu_use_count[3][cluster]) - -#define exynos_cluster_unused(cluster) !exynos_cluster_usecnt(cluster) - -static int exynos_power_up(unsigned int cpu, unsigned int cluster) +static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster) { unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); @@ -88,127 +70,65 @@ static int exynos_power_up(unsigned int cpu, unsigned int cluster) cluster >= EXYNOS5420_NR_CLUSTERS) return -EINVAL; - /* - * Since this is called with IRQs enabled, and no arch_spin_lock_irq - * variant exists, we need to disable IRQs manually here. - */ - local_irq_disable(); - arch_spin_lock(&exynos_mcpm_lock); - - cpu_use_count[cpu][cluster]++; - if (cpu_use_count[cpu][cluster] == 1) { - bool was_cluster_down = - (exynos_cluster_usecnt(cluster) == 1); - - /* - * Turn on the cluster (L2/COMMON) and then power on the - * cores. - */ - if (was_cluster_down) - exynos_cluster_power_up(cluster); - - exynos_cpu_power_up(cpunr); - } else if (cpu_use_count[cpu][cluster] != 2) { - /* - * The only possible values are: - * 0 = CPU down - * 1 = CPU (still) up - * 2 = CPU requested to be up before it had a chance - * to actually make itself down. - * Any other value is a bug. - */ - BUG(); - } + exynos_cpu_power_up(cpunr); + return 0; +} - arch_spin_unlock(&exynos_mcpm_lock); - local_irq_enable(); +static int exynos_cluster_powerup(unsigned int cluster) +{ + pr_debug("%s: cluster %u\n", __func__, cluster); + if (cluster >= EXYNOS5420_NR_CLUSTERS) + return -EINVAL; + exynos_cluster_power_up(cluster); return 0; } -/* - * NOTE: This function requires the stack data to be visible through power down - * and can only be executed on processors like A15 and A7 that hit the cache - * with the C bit clear in the SCTLR register. - */ -static void exynos_power_down(void) +static void exynos_cpu_powerdown_prepare(unsigned int cpu, unsigned int cluster) { - unsigned int mpidr, cpu, cluster; - bool last_man = false, skip_wfi = false; - unsigned int cpunr; - - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); + unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER || cluster >= EXYNOS5420_NR_CLUSTERS); + exynos_cpu_power_down(cpunr); +} - __mcpm_cpu_going_down(cpu, cluster); - - arch_spin_lock(&exynos_mcpm_lock); - BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); - cpu_use_count[cpu][cluster]--; - if (cpu_use_count[cpu][cluster] == 0) { - exynos_cpu_power_down(cpunr); - - if (exynos_cluster_unused(cluster)) { - exynos_cluster_power_down(cluster); - last_man = true; - } - } else if (cpu_use_count[cpu][cluster] == 1) { - /* - * A power_up request went ahead of us. - * Even if we do not want to shut this CPU down, - * the caller expects a certain state as if the WFI - * was aborted. So let's continue with cache cleaning. - */ - skip_wfi = true; - } else { - BUG(); - } - - if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { - arch_spin_unlock(&exynos_mcpm_lock); - - if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) { - /* - * On the Cortex-A15 we need to disable - * L2 prefetching before flushing the cache. - */ - asm volatile( - "mcr p15, 1, %0, c15, c0, 3\n\t" - "isb\n\t" - "dsb" - : : "r" (0x400)); - } +static void exynos_cluster_powerdown_prepare(unsigned int cluster) +{ + pr_debug("%s: cluster %u\n", __func__, cluster); + BUG_ON(cluster >= EXYNOS5420_NR_CLUSTERS); + exynos_cluster_power_down(cluster); +} - /* Flush all cache levels for this cluster. */ - exynos_v7_exit_coherency_flush(all); +static void exynos_cpu_cache_disable(void) +{ + /* Disable and flush the local CPU cache. */ + exynos_v7_exit_coherency_flush(louis); +} +static void exynos_cluster_cache_disable(void) +{ + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) { /* - * Disable cluster-level coherency by masking - * incoming snoops and DVM messages: + * On the Cortex-A15 we need to disable + * L2 prefetching before flushing the cache. */ - cci_disable_port_by_cpu(mpidr); - - __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); - } else { - arch_spin_unlock(&exynos_mcpm_lock); - - /* Disable and flush the local CPU cache. */ - exynos_v7_exit_coherency_flush(louis); + asm volatile( + "mcr p15, 1, %0, c15, c0, 3\n\t" + "isb\n\t" + "dsb" + : : "r" (0x400)); } - __mcpm_cpu_down(cpu, cluster); - - /* Now we are prepared for power-down, do it: */ - if (!skip_wfi) - wfi(); + /* Flush all cache levels for this cluster. */ + exynos_v7_exit_coherency_flush(all); - /* Not dead at this point? Let our caller cope. */ + /* + * Disable cluster-level coherency by masking + * incoming snoops and DVM messages: + */ + cci_disable_port_by_cpu(read_cpuid_mpidr()); } static int exynos_wait_for_powerdown(unsigned int cpu, unsigned int cluster) @@ -222,10 +142,8 @@ static int exynos_wait_for_powerdown(unsigned int cpu, unsigned int cluster) /* Wait for the core state to be OFF */ while (tries--) { - if (ACCESS_ONCE(cpu_use_count[cpu][cluster]) == 0) { - if ((exynos_cpu_power_state(cpunr) == 0)) - return 0; /* success: the CPU is halted */ - } + if ((exynos_cpu_power_state(cpunr) == 0)) + return 0; /* success: the CPU is halted */ /* Otherwise, wait and retry: */ msleep(1); @@ -234,63 +152,23 @@ static int exynos_wait_for_powerdown(unsigned int cpu, unsigned int cluster) return -ETIMEDOUT; /* timeout */ } -static void exynos_powered_up(void) -{ - unsigned int mpidr, cpu, cluster; - - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - - arch_spin_lock(&exynos_mcpm_lock); - if (cpu_use_count[cpu][cluster] == 0) - cpu_use_count[cpu][cluster] = 1; - arch_spin_unlock(&exynos_mcpm_lock); -} - -static void exynos_suspend(u64 residency) +static void exynos_cpu_is_up(unsigned int cpu, unsigned int cluster) { - unsigned int mpidr, cpunr; - - exynos_power_down(); - - /* - * Execution reaches here only if cpu did not power down. - * Hence roll back the changes done in exynos_power_down function. - * - * CAUTION: "This function requires the stack data to be visible through - * power down and can only be executed on processors like A15 and A7 - * that hit the cache with the C bit clear in the SCTLR register." - */ - mpidr = read_cpuid_mpidr(); - cpunr = exynos_pmu_cpunr(mpidr); - - exynos_cpu_power_up(cpunr); + /* especially when resuming: make sure power control is set */ + exynos_cpu_powerup(cpu, cluster); } static const struct mcpm_platform_ops exynos_power_ops = { - .power_up = exynos_power_up, - .power_down = exynos_power_down, + .cpu_powerup = exynos_cpu_powerup, + .cluster_powerup = exynos_cluster_powerup, + .cpu_powerdown_prepare = exynos_cpu_powerdown_prepare, + .cluster_powerdown_prepare = exynos_cluster_powerdown_prepare, + .cpu_cache_disable = exynos_cpu_cache_disable, + .cluster_cache_disable = exynos_cluster_cache_disable, .wait_for_powerdown = exynos_wait_for_powerdown, - .suspend = exynos_suspend, - .powered_up = exynos_powered_up, + .cpu_is_up = exynos_cpu_is_up, }; -static void __init exynos_mcpm_usage_count_init(void) -{ - unsigned int mpidr, cpu, cluster; - - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - - pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); - BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER || - cluster >= EXYNOS5420_NR_CLUSTERS); - - cpu_use_count[cpu][cluster] = 1; -} - /* * Enable cluster-level coherency, in preparation for turning on the MMU. */ @@ -302,19 +180,6 @@ static void __naked exynos_pm_power_up_setup(unsigned int affinity_level) "b cci_enable_port_for_self"); } -static void __init exynos_cache_off(void) -{ - if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) { - /* disable L2 prefetching on the Cortex-A15 */ - asm volatile( - "mcr p15, 1, %0, c15, c0, 3\n\t" - "isb\n\t" - "dsb" - : : "r" (0x400)); - } - exynos_v7_exit_coherency_flush(all); -} - static const struct of_device_id exynos_dt_mcpm_match[] = { { .compatible = "samsung,exynos5420" }, { .compatible = "samsung,exynos5800" }, @@ -370,13 +235,11 @@ static int __init exynos_mcpm_init(void) */ pmu_raw_writel(EXYNOS5420_SWRESET_KFC_SEL, S5P_PMU_SPARE3); - exynos_mcpm_usage_count_init(); - ret = mcpm_platform_register(&exynos_power_ops); if (!ret) ret = mcpm_sync_init(exynos_pm_power_up_setup); if (!ret) - ret = mcpm_loopback(exynos_cache_off); /* turn on the CCI */ + ret = mcpm_loopback(exynos_cluster_cache_disable); /* turn on the CCI */ if (ret) { iounmap(ns_sram_base_addr); return ret; diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index d2e9f12d12f187e1e2c40f11748f75bbe0a283f2..a825bca2a2b699490809676cef6f66d4eb86fd21 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -34,30 +34,6 @@ extern void exynos4_secondary_startup(void); -/* - * Set or clear the USE_DELAYED_RESET_ASSERTION option, set on Exynos4 SoCs - * during hot-(un)plugging CPUx. - * - * The feature can be cleared safely during first boot of secondary CPU. - * - * Exynos4 SoCs require setting USE_DELAYED_RESET_ASSERTION during powering - * down a CPU so the CPU idle clock down feature could properly detect global - * idle state when CPUx is off. - */ -static void exynos_set_delayed_reset_assertion(u32 core_id, bool enable) -{ - if (soc_is_exynos4()) { - unsigned int tmp; - - tmp = pmu_raw_readl(EXYNOS_ARM_CORE_OPTION(core_id)); - if (enable) - tmp |= S5P_USE_DELAYED_RESET_ASSERTION; - else - tmp &= ~(S5P_USE_DELAYED_RESET_ASSERTION); - pmu_raw_writel(tmp, EXYNOS_ARM_CORE_OPTION(core_id)); - } -} - #ifdef CONFIG_HOTPLUG_CPU static inline void cpu_leave_lowpower(u32 core_id) { @@ -73,8 +49,6 @@ static inline void cpu_leave_lowpower(u32 core_id) : "=&r" (v) : "Ir" (CR_C), "Ir" (0x40) : "cc"); - - exynos_set_delayed_reset_assertion(core_id, false); } static inline void platform_do_lowpower(unsigned int cpu, int *spurious) @@ -87,14 +61,6 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) /* Turn the CPU off on next WFI instruction. */ exynos_cpu_power_down(core_id); - /* - * Exynos4 SoCs require setting - * USE_DELAYED_RESET_ASSERTION so the CPU idle - * clock down feature could properly detect - * global idle state when CPUx is off. - */ - exynos_set_delayed_reset_assertion(core_id, true); - wfi(); if (pen_release == core_id) { @@ -126,6 +92,8 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) */ void exynos_cpu_power_down(int cpu) { + u32 core_conf; + if (cpu == 0 && (soc_is_exynos5420() || soc_is_exynos5800())) { /* * Bypass power down for CPU0 during suspend. Check for @@ -137,7 +105,10 @@ void exynos_cpu_power_down(int cpu) if (!(val & S5P_CORE_LOCAL_PWR_EN)) return; } - pmu_raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu)); + + core_conf = pmu_raw_readl(EXYNOS_ARM_CORE_CONFIGURATION(cpu)); + core_conf &= ~S5P_CORE_LOCAL_PWR_EN; + pmu_raw_writel(core_conf, EXYNOS_ARM_CORE_CONFIGURATION(cpu)); } /** @@ -148,7 +119,12 @@ void exynos_cpu_power_down(int cpu) */ void exynos_cpu_power_up(int cpu) { - pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN, + u32 core_conf = S5P_CORE_LOCAL_PWR_EN; + + if (soc_is_exynos3250()) + core_conf |= S5P_CORE_AUTOWAKEUP_EN; + + pmu_raw_writel(core_conf, EXYNOS_ARM_CORE_CONFIGURATION(cpu)); } @@ -226,6 +202,10 @@ static void exynos_core_restart(u32 core_id) if (!of_machine_is_compatible("samsung,exynos3250")) return; + while (!pmu_raw_readl(S5P_PMU_SPARE2)) + udelay(10); + udelay(10); + val = pmu_raw_readl(EXYNOS_ARM_CORE_STATUS(core_id)); val |= S5P_CORE_WAKEUP_FROM_LOCAL_CFG; pmu_raw_writel(val, EXYNOS_ARM_CORE_STATUS(core_id)); @@ -346,7 +326,10 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) call_firmware_op(cpu_boot, core_id); - arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + if (soc_is_exynos3250()) + dsb_sev(); + else + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); if (pen_release == -1) break; @@ -354,9 +337,6 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) udelay(10); } - /* No harm if this is called during first boot of secondary CPU */ - exynos_set_delayed_reset_assertion(core_id, false); - /* * now the secondary core is starting up let it run its * calibrations, then wait for it to finish @@ -403,6 +383,8 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) exynos_sysram_init(); + exynos_set_delayed_reset_assertion(true); + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) scu_enable(scu_base_addr()); diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index e6209dadc00d483c6e85b2b2870bc82828ad749d..cc75ab448be3b4ce9b3c0fc2e626da4ed3d6e6ca 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -127,6 +127,8 @@ int exynos_pm_central_resume(void) static void exynos_set_wakeupmask(long mask) { pmu_raw_writel(mask, S5P_WAKEUP_MASK); + if (soc_is_exynos3250()) + pmu_raw_writel(0x0, S5P_WAKEUP_MASK2); } static void exynos_cpu_set_boot_vector(long flags) @@ -140,7 +142,7 @@ static int exynos_aftr_finisher(unsigned long flags) { int ret; - exynos_set_wakeupmask(0x0000ff3e); + exynos_set_wakeupmask(soc_is_exynos3250() ? 0x40003ffe : 0x0000ff3e); /* Set value of power down register for aftr mode */ exynos_sys_powerdown_conf(SYS_AFTR); @@ -157,8 +159,13 @@ static int exynos_aftr_finisher(unsigned long flags) void exynos_enter_aftr(void) { + unsigned int cpuid = smp_processor_id(); + cpu_pm_enter(); + if (soc_is_exynos3250()) + exynos_set_boot_flag(cpuid, C2_STATE); + exynos_pm_central_suspend(); if (of_machine_is_compatible("samsung,exynos4212") || @@ -178,9 +185,13 @@ void exynos_enter_aftr(void) exynos_pm_central_resume(); + if (soc_is_exynos3250()) + exynos_clear_boot_flag(cpuid, C2_STATE); + cpu_pm_exit(); } +#if defined(CONFIG_SMP) && defined(CONFIG_ARM_EXYNOS_CPUIDLE) static atomic_t cpu1_wakeup = ATOMIC_INIT(0); static int exynos_cpu0_enter_aftr(void) @@ -302,3 +313,4 @@ struct cpuidle_exynos_data cpuidle_coupled_exynos_data = { .pre_enter_aftr = exynos_pre_enter_aftr, .post_enter_aftr = exynos_post_enter_aftr, }; +#endif /* CONFIG_SMP && CONFIG_ARM_EXYNOS_CPUIDLE */ diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 37266a8264372a9d8ab898aec6389476f707869f..a9686535f9ed460706a41a99dc60d6d4f575ab3b 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -37,6 +37,7 @@ struct exynos_pm_domain { struct clk *oscclk; struct clk *clk[MAX_CLK_PER_DOMAIN]; struct clk *pclk[MAX_CLK_PER_DOMAIN]; + struct clk *asb_clk[MAX_CLK_PER_DOMAIN]; }; static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) @@ -45,14 +46,19 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) void __iomem *base; u32 timeout, pwr; char *op; + int i; pd = container_of(domain, struct exynos_pm_domain, pd); base = pd->base; + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + if (IS_ERR(pd->asb_clk[i])) + break; + clk_prepare_enable(pd->asb_clk[i]); + } + /* Set oscclk before powering off a domain*/ if (!power_on) { - int i; - for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { if (IS_ERR(pd->clk[i])) break; @@ -81,8 +87,6 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) /* Restore clocks after powering on a domain*/ if (power_on) { - int i; - for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { if (IS_ERR(pd->clk[i])) break; @@ -92,6 +96,12 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) } } + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + if (IS_ERR(pd->asb_clk[i])) + break; + clk_disable_unprepare(pd->asb_clk[i]); + } + return 0; } @@ -125,12 +135,21 @@ static __init int exynos4_pm_init_power_domain(void) return -ENOMEM; } - pd->pd.name = kstrdup(np->name, GFP_KERNEL); + pd->pd.name = kstrdup(dev_name(dev), GFP_KERNEL); pd->name = pd->pd.name; pd->base = of_iomap(np, 0); pd->pd.power_off = exynos_pd_power_off; pd->pd.power_on = exynos_pd_power_on; + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + char clk_name[8]; + + snprintf(clk_name, sizeof(clk_name), "asb%d", i); + pd->asb_clk[i] = clk_get(dev, clk_name); + if (IS_ERR(pd->asb_clk[i])) + break; + } + pd->oscclk = clk_get(dev, "oscclk"); if (IS_ERR(pd->oscclk)) goto no_clk; @@ -169,7 +188,7 @@ static __init int exynos4_pm_init_power_domain(void) args.np = np; args.args_count = 0; child_domain = of_genpd_get_from_provider(&args); - if (!child_domain) + if (IS_ERR(child_domain)) continue; if (of_parse_phandle_with_args(np, "power-domains", @@ -177,7 +196,7 @@ static __init int exynos4_pm_init_power_domain(void) continue; parent_domain = of_genpd_get_from_provider(&args); - if (!parent_domain) + if (IS_ERR(parent_domain)) continue; if (pm_genpd_add_subdomain(parent_domain, child_domain)) diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h index eb461e1c325ad96952495dad756af1d6b9c8a049..b7614333d2968befa767109f693bf7947528db4a 100644 --- a/arch/arm/mach-exynos/regs-pmu.h +++ b/arch/arm/mach-exynos/regs-pmu.h @@ -43,12 +43,14 @@ #define S5P_WAKEUP_STAT 0x0600 #define S5P_EINT_WAKEUP_MASK 0x0604 #define S5P_WAKEUP_MASK 0x0608 +#define S5P_WAKEUP_MASK2 0x0614 #define S5P_INFORM0 0x0800 #define S5P_INFORM1 0x0804 #define S5P_INFORM5 0x0814 #define S5P_INFORM6 0x0818 #define S5P_INFORM7 0x081C +#define S5P_PMU_SPARE2 0x0908 #define S5P_PMU_SPARE3 0x090C #define EXYNOS_IROM_DATA2 0x0988 @@ -182,6 +184,7 @@ #define S5P_CORE_LOCAL_PWR_EN 0x3 #define S5P_CORE_WAKEUP_FROM_LOCAL_CFG (0x3 << 8) +#define S5P_CORE_AUTOWAKEUP_EN (1 << 31) /* Only for EXYNOS4210 */ #define S5P_CMU_CLKSTOP_LCD1_LOWPWR 0x1154 diff --git a/arch/arm/mach-exynos/sleep.S b/arch/arm/mach-exynos/sleep.S index 31d25834b9c4b04d5e8a57adf39aa9083c38d027..cf950790fbdceb470643b5e8c152394deb2d46e5 100644 --- a/arch/arm/mach-exynos/sleep.S +++ b/arch/arm/mach-exynos/sleep.S @@ -23,14 +23,7 @@ #define CPU_MASK 0xff0ffff0 #define CPU_CORTEX_A9 0x410fc090 - /* - * The following code is located into the .data section. This is to - * allow l2x0_regs_phys to be accessed with a relative load while we - * can't rely on any MMU translation. We could have put l2x0_regs_phys - * in the .text section as well, but some setups might insist on it to - * be truly read-only. (Reference from: arch/arm/kernel/sleep.S) - */ - .data + .text .align /* @@ -69,10 +62,12 @@ ENTRY(exynos_cpu_resume_ns) cmp r0, r1 bne skip_cp15 - adr r0, cp15_save_power + adr r0, _cp15_save_power ldr r1, [r0] - adr r0, cp15_save_diag + ldr r1, [r0, r1] + adr r0, _cp15_save_diag ldr r2, [r0] + ldr r2, [r0, r2] mov r0, #SMC_CMD_C15RESUME dsb smc #0 @@ -118,14 +113,20 @@ skip_l2x0: skip_cp15: b cpu_resume ENDPROC(exynos_cpu_resume_ns) + + .align +_cp15_save_power: + .long cp15_save_power - . +_cp15_save_diag: + .long cp15_save_diag - . +#ifdef CONFIG_CACHE_L2X0 +1: .long l2x0_saved_regs - . +#endif /* CONFIG_CACHE_L2X0 */ + + .data .globl cp15_save_diag cp15_save_diag: .long 0 @ cp15 diagnostic .globl cp15_save_power cp15_save_power: .long 0 @ cp15 power control - -#ifdef CONFIG_CACHE_L2X0 - .align -1: .long l2x0_saved_regs - . -#endif /* CONFIG_CACHE_L2X0 */ diff --git a/arch/arm/mach-exynos/smc.h b/arch/arm/mach-exynos/smc.h index f7b82f9c1e213053c53aaab321fb0e9f558b8b73..c2845717bc8fd9860d62ee14191556854a484d7d 100644 --- a/arch/arm/mach-exynos/smc.h +++ b/arch/arm/mach-exynos/smc.h @@ -17,6 +17,8 @@ #define SMC_CMD_SLEEP (-3) #define SMC_CMD_CPU1BOOT (-4) #define SMC_CMD_CPU0AFTR (-5) +#define SMC_CMD_SAVE (-6) +#define SMC_CMD_SHUTDOWN (-7) /* For CP15 Access */ #define SMC_CMD_C15RESUME (-11) /* For L2 Cache Access */ @@ -32,4 +34,11 @@ extern void exynos_smc(u32 cmd, u32 arg1, u32 arg2, u32 arg3); #endif /* __ASSEMBLY__ */ +/* op type for SMC_CMD_SAVE and SMC_CMD_SHUTDOWN */ +#define OP_TYPE_CORE 0x0 +#define OP_TYPE_CLUSTER 0x1 + +/* Power State required for SMC_CMD_SAVE and SMC_CMD_SHUTDOWN */ +#define SMC_POWERSTATE_IDLE 0x1 + #endif diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index 2146d918aedd265623cd3a7cb1393e4437095f3b..c0b6dccbf7bd5d8d14c05172d11d6ee690bf8fef 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -65,8 +65,6 @@ static struct sleep_save exynos_core_save[] = { struct exynos_pm_data { const struct exynos_wkup_irq *wkup_irq; - struct sleep_save *extra_save; - int num_extra_save; unsigned int wake_disable_mask; unsigned int *release_ret_regs; @@ -77,7 +75,7 @@ struct exynos_pm_data { int (*cpu_suspend)(unsigned long); }; -struct exynos_pm_data *pm_data; +static const struct exynos_pm_data *pm_data; static int exynos5420_cpu_state; static unsigned int exynos_pmu_spare3; @@ -106,7 +104,7 @@ static const struct exynos_wkup_irq exynos5250_wkup_irq[] = { { /* sentinel */ }, }; -unsigned int exynos_release_ret_regs[] = { +static unsigned int exynos_release_ret_regs[] = { S5P_PAD_RET_MAUDIO_OPTION, S5P_PAD_RET_GPIO_OPTION, S5P_PAD_RET_UART_OPTION, @@ -117,7 +115,7 @@ unsigned int exynos_release_ret_regs[] = { REG_TABLE_END, }; -unsigned int exynos3250_release_ret_regs[] = { +static unsigned int exynos3250_release_ret_regs[] = { S5P_PAD_RET_MAUDIO_OPTION, S5P_PAD_RET_GPIO_OPTION, S5P_PAD_RET_UART_OPTION, @@ -130,7 +128,7 @@ unsigned int exynos3250_release_ret_regs[] = { REG_TABLE_END, }; -unsigned int exynos5420_release_ret_regs[] = { +static unsigned int exynos5420_release_ret_regs[] = { EXYNOS_PAD_RET_DRAM_OPTION, EXYNOS_PAD_RET_MAUDIO_OPTION, EXYNOS_PAD_RET_JTAG_OPTION, @@ -344,15 +342,13 @@ static void exynos_pm_enter_sleep_mode(void) static void exynos_pm_prepare(void) { + exynos_set_delayed_reset_assertion(false); + /* Set wake-up mask registers */ exynos_pm_set_wakeup_mask(); s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - if (pm_data->extra_save) - s3c_pm_do_save(pm_data->extra_save, - pm_data->num_extra_save); - exynos_pm_enter_sleep_mode(); /* ensure at least INFORM0 has the resume address */ @@ -475,10 +471,6 @@ static void exynos_pm_resume(void) /* For release retention */ exynos_pm_release_retention(); - if (pm_data->extra_save) - s3c_pm_do_restore_core(pm_data->extra_save, - pm_data->num_extra_save); - s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save)); if (cpuid == ARM_CPU_PART_CORTEX_A9) @@ -492,6 +484,7 @@ static void exynos_pm_resume(void) /* Clear SLEEP mode set in INFORM1 */ pmu_raw_writel(0x0, S5P_INFORM1); + exynos_set_delayed_reset_assertion(true); } static void exynos3250_pm_resume(void) @@ -685,7 +678,7 @@ static const struct exynos_pm_data exynos5250_pm_data = { .cpu_suspend = exynos_cpu_suspend, }; -static struct exynos_pm_data exynos5420_pm_data = { +static const struct exynos_pm_data exynos5420_pm_data = { .wkup_irq = exynos5250_wkup_irq, .wake_disable_mask = (0x7F << 7) | (0x1F << 1), .release_ret_regs = exynos5420_release_ret_regs, @@ -733,10 +726,12 @@ void __init exynos_pm_init(void) return; } - if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) + if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) { pr_warn("Outdated DT detected, suspend/resume will NOT work\n"); + return; + } - pm_data = (struct exynos_pm_data *) match->data; + pm_data = (const struct exynos_pm_data *) match->data; /* All wakeup disable */ tmp = pmu_raw_readl(S5P_WAKEUP_MASK); diff --git a/arch/arm/mach-gemini/common.h b/arch/arm/mach-gemini/common.h index 38a45260a7c8b522dc3b8c163a19d4debe711ca9..dd883698ff7eafe977d2a220468d5aad876ce5ce 100644 --- a/arch/arm/mach-gemini/common.h +++ b/arch/arm/mach-gemini/common.h @@ -12,6 +12,8 @@ #ifndef __GEMINI_COMMON_H__ #define __GEMINI_COMMON_H__ +#include + struct mtd_partition; extern void gemini_map_io(void); @@ -26,6 +28,6 @@ extern int platform_register_pflash(unsigned int size, struct mtd_partition *parts, unsigned int nr_parts); -extern void gemini_restart(char mode, const char *cmd); +extern void gemini_restart(enum reboot_mode mode, const char *cmd); #endif /* __GEMINI_COMMON_H__ */ diff --git a/arch/arm/mach-gemini/reset.c b/arch/arm/mach-gemini/reset.c index b26659759e2750bfef5f171b7d770905019e58ed..21a6d6d4f9c43d1ab8a608962761098bc847e35f 100644 --- a/arch/arm/mach-gemini/reset.c +++ b/arch/arm/mach-gemini/reset.c @@ -14,7 +14,9 @@ #include #include -void gemini_restart(char mode, const char *cmd) +#include "common.h" + +void gemini_restart(enum reboot_mode mode, const char *cmd) { __raw_writel(RESET_GLOBAL | RESET_CPU1, IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_RESET); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index c8dffcee97363eec0cb898f73973088496a3b0c6..3a3d3e9d7bfd6eb7f781bfa904df5caede06a33c 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -21,6 +21,7 @@ config MXC_AVIC config MXC_DEBUG_BOARD bool "Enable MXC debug board(for 3-stack)" + depends on MACH_MX27_3DS || MACH_MX31_3DS || MACH_MX35_3DS help The debug board is an integral part of the MXC 3-stack(PDK) platforms, it can be attached or removed from the peripheral @@ -50,6 +51,7 @@ config HAVE_IMX_ANATOP config HAVE_IMX_GPC bool + select PM_GENERIC_DOMAINS if PM config HAVE_IMX_MMDC bool @@ -77,13 +79,6 @@ config SOC_IMX21 select IMX_HAVE_IOMUX_V1 select MXC_AVIC -config SOC_IMX25 - bool - select ARCH_MXC_IOMUX_V3 - select CPU_ARM926T - select MXC_AVIC - select PINCTRL_IMX25 - config SOC_IMX27 bool select CPU_ARM926T @@ -149,62 +144,6 @@ config MACH_MX21ADS Include support for MX21ADS platform. This includes specific configurations for the board and its peripherals. -comment "MX25 platforms:" - -config MACH_MX25_3DS - bool "Support MX25PDK (3DS) Platform" - select IMX_HAVE_PLATFORM_FLEXCAN - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMXDI_RTC - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select SOC_IMX25 - -config MACH_EUKREA_CPUIMX25SD - bool "Support Eukrea CPUIMX25 Platform" - select IMX_HAVE_PLATFORM_FLEXCAN - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMXDI_RTC - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX25 - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX25SD - default MACH_EUKREA_MBIMXSD25_BASEBOARD - -config MACH_EUKREA_MBIMXSD25_BASEBOARD - bool "Eukrea MBIMXSD development board" - select IMX_HAVE_PLATFORM_GPIO_KEYS - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_SPI_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMXSD evaluation board. - -endchoice - -config MACH_IMX25_DT - bool "Support i.MX25 platforms from device tree" - select SOC_IMX25 - help - Include support for Freescale i.MX25 based platforms - using the device tree for discovery - comment "MX27 platforms:" config MACH_MX27ADS @@ -557,6 +496,20 @@ config MACH_VPR200 endif +if ARCH_MULTI_V5 + +comment "Device tree only" + +config SOC_IMX25 + bool "i.MX25 support" + select ARCH_MXC_IOMUX_V3 + select CPU_ARM926T + select MXC_AVIC + select PINCTRL_IMX25 + help + This enables support for Freescale i.MX25 processor +endif + if ARCH_MULTI_V7 comment "Device tree only" @@ -635,9 +588,10 @@ config SOC_VF610 select ARM_GIC select PINCTRL_VF610 select PL310_ERRATA_769419 if CACHE_L2X0 + select SMP_ON_UP if SMP help - This enable support for Freescale Vybrid VF610 processor. + This enables support for Freescale Vybrid VF610 processor. choice prompt "Clocksource for scheduler clock" @@ -667,7 +621,7 @@ config SOC_LS1021A select ZONE_DMA if ARM_LPAE help - This enable support for Freescale LS1021A processor. + This enables support for Freescale LS1021A processor. endif diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 8d1b1018090898d9d1698b6bb39825a99d540001..3244cf1d2773f1c20836b6b96e60f4d054aa67f0 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -3,7 +3,7 @@ obj-y := time.o cpu.o system.o irq-common.o obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o -obj-$(CONFIG_SOC_IMX25) += clk-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o +obj-$(CONFIG_SOC_IMX25) += clk-imx25.o cpu-imx25.o mach-imx25.o obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o @@ -48,12 +48,6 @@ obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o # i.MX21 based machines obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o -# i.MX25 based machines -obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o -obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o -obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o - # i.MX27 based machines obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index 59c0c8558c6bf5d5212c5e88083a55f859f01287..9c2633a9de9f0ec53dfdc20677eb709488b7824a 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -30,7 +30,6 @@ #include "clk.h" #include "common.h" #include "hardware.h" -#include "mx25.h" #define CCM_MPCTL 0x00 #define CCM_UPCTL 0x04 @@ -239,80 +238,6 @@ static int __init __mx25_clocks_init(unsigned long osc_rate, return 0; } -int __init mx25_clocks_init(void) -{ - void __iomem *ccm; - - ccm = ioremap(MX25_CRM_BASE_ADDR, SZ_16K); - - __mx25_clocks_init(24000000, ccm); - - clk_register_clkdev(clk[gpt1_ipg], "ipg", "imx-gpt.0"); - clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); - /* i.mx25 has the i.mx21 type uart */ - clk_register_clkdev(clk[uart1_ipg], "ipg", "imx21-uart.0"); - clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.0"); - clk_register_clkdev(clk[uart2_ipg], "ipg", "imx21-uart.1"); - clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.1"); - clk_register_clkdev(clk[uart3_ipg], "ipg", "imx21-uart.2"); - clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.2"); - clk_register_clkdev(clk[uart4_ipg], "ipg", "imx21-uart.3"); - clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.3"); - clk_register_clkdev(clk[uart5_ipg], "ipg", "imx21-uart.4"); - clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.4"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0"); - clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.0"); - clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1"); - clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.1"); - clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2"); - clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2"); - clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2"); - clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27"); - clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx27"); - clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27"); - clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0"); - /* i.mx25 has the i.mx35 type cspi */ - clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0"); - clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1"); - clk_register_clkdev(clk[cspi3_ipg], NULL, "imx35-cspi.2"); - clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad"); - clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc"); - clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.0"); - clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.1"); - clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.2"); - clk_register_clkdev(clk[fec_ipg], "ipg", "imx25-fec.0"); - clk_register_clkdev(clk[fec_ahb], "ahb", "imx25-fec.0"); - clk_register_clkdev(clk[dryice_ipg], NULL, "imxdi_rtc.0"); - clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx21-fb.0"); - clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx21-fb.0"); - clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx21-fb.0"); - clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0"); - clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1"); - clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0"); - clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0"); - clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0"); - clk_register_clkdev(clk[esdhc2_ipg_per], "per", "sdhci-esdhc-imx25.1"); - clk_register_clkdev(clk[esdhc2_ipg], "ipg", "sdhci-esdhc-imx25.1"); - clk_register_clkdev(clk[esdhc2_ahb], "ahb", "sdhci-esdhc-imx25.1"); - clk_register_clkdev(clk[csi_ipg_per], "per", "imx25-camera.0"); - clk_register_clkdev(clk[csi_ipg], "ipg", "imx25-camera.0"); - clk_register_clkdev(clk[csi_ahb], "ahb", "imx25-camera.0"); - clk_register_clkdev(clk[dummy], "audmux", NULL); - clk_register_clkdev(clk[can1_ipg], NULL, "flexcan.0"); - clk_register_clkdev(clk[can2_ipg], NULL, "flexcan.1"); - /* i.mx25 has the i.mx35 type sdma */ - clk_register_clkdev(clk[sdma_ipg], "ipg", "imx35-sdma"); - clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma"); - clk_register_clkdev(clk[iim_ipg], "iim", NULL); - - mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), MX25_INT_GPT1); - - return 0; -} - static void __init mx25_clocks_init_dt(struct device_node *np) { struct device_node *refnp; diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index d04a430607b8af66ef71ba3f01ff8e151738eeb1..469a150bf98f98cbb5521343e81d531c7fc34e91 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -119,6 +119,7 @@ static unsigned int share_count_asrc; static unsigned int share_count_ssi1; static unsigned int share_count_ssi2; static unsigned int share_count_ssi3; +static unsigned int share_count_mipi_core_cfg; static void __init imx6q_clocks_init(struct device_node *ccm_node) { @@ -246,6 +247,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2); clk[IMX6QDL_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8); + clk[IMX6QDL_CLK_VIDEO_27M] = imx_clk_fixed_factor("video_27m", "pll3_pfd1_540m", 1, 20); if (cpu_is_imx6dl()) { clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1); clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1); @@ -400,7 +402,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24); clk[IMX6QDL_CLK_GPU3D_CORE] = imx_clk_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26); clk[IMX6QDL_CLK_HDMI_IAHB] = imx_clk_gate2("hdmi_iahb", "ahb", base + 0x70, 0); - clk[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_gate2("hdmi_isfr", "pll3_pfd1_540m", base + 0x70, 4); + clk[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_gate2("hdmi_isfr", "video_27m", base + 0x70, 4); clk[IMX6QDL_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_per", base + 0x70, 6); clk[IMX6QDL_CLK_I2C2] = imx_clk_gate2("i2c2", "ipg_per", base + 0x70, 8); clk[IMX6QDL_CLK_I2C3] = imx_clk_gate2("i2c3", "ipg_per", base + 0x70, 10); @@ -415,7 +417,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_podf", base + 0x74, 12); clk[IMX6QDL_CLK_LDB_DI1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14); clk[IMX6QDL_CLK_IPU2_DI1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10); - clk[IMX6QDL_CLK_HSI_TX] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16); + clk[IMX6QDL_CLK_HSI_TX] = imx_clk_gate2_shared("hsi_tx", "hsi_tx_podf", base + 0x74, 16, &share_count_mipi_core_cfg); + clk[IMX6QDL_CLK_MIPI_CORE_CFG] = imx_clk_gate2_shared("mipi_core_cfg", "video_27m", base + 0x74, 16, &share_count_mipi_core_cfg); + clk[IMX6QDL_CLK_MIPI_IPG] = imx_clk_gate2_shared("mipi_ipg", "ipg", base + 0x74, 16, &share_count_mipi_core_cfg); if (cpu_is_imx6dl()) /* * The multiplexer and divider of the imx6q clock gpu2d get diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 1028b6c505c496b315b90c65911e1cda403ac4fe..0f04e30b726d22e43ad725427bf2731295a705e7 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -23,13 +23,11 @@ struct of_device_id; void mx1_map_io(void); void mx21_map_io(void); -void mx25_map_io(void); void mx27_map_io(void); void mx31_map_io(void); void mx35_map_io(void); void imx1_init_early(void); void imx21_init_early(void); -void imx25_init_early(void); void imx27_init_early(void); void imx31_init_early(void); void imx35_init_early(void); @@ -37,13 +35,11 @@ void mxc_init_irq(void __iomem *); void tzic_init_irq(void); void mx1_init_irq(void); void mx21_init_irq(void); -void mx25_init_irq(void); void mx27_init_irq(void); void mx31_init_irq(void); void mx35_init_irq(void); void imx1_soc_init(void); void imx21_soc_init(void); -void imx25_soc_init(void); void imx27_soc_init(void); void imx31_soc_init(void); void imx35_soc_init(void); @@ -51,7 +47,6 @@ void epit_timer_init(void __iomem *base, int irq); void mxc_timer_init(void __iomem *, int); int mx1_clocks_init(unsigned long fref); int mx21_clocks_init(unsigned long lref, unsigned long fref); -int mx25_clocks_init(void); int mx27_clocks_init(unsigned long fref); int mx31_clocks_init(unsigned long fref); int mx35_clocks_init(void); @@ -71,6 +66,7 @@ unsigned int imx_get_soc_revision(void); void imx_init_revision_from_anatop(void); struct device *imx_soc_device_init(void); void imx6_enable_rbc(bool enable); +void imx_gpc_check_dt(void); void imx_gpc_set_arm_power_in_lpm(bool power_off); void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw); void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw); @@ -106,7 +102,6 @@ static inline void imx_scu_map_io(void) {} static inline void imx_smp_prepare(void) {} #endif void imx_src_init(void); -void imx_gpc_init(void); void imx_gpc_pre_suspend(bool arm_power_off); void imx_gpc_post_resume(void); void imx_gpc_mask_all(void); diff --git a/arch/arm/mach-imx/cpu-imx25.c b/arch/arm/mach-imx/cpu-imx25.c index 96ec64b5ff7d3e056ddfdea0f3918278732ea0c1..d0ad67e802d33962c1f10f9bfabe9e3b01c7c903 100644 --- a/arch/arm/mach-imx/cpu-imx25.c +++ b/arch/arm/mach-imx/cpu-imx25.c @@ -11,6 +11,8 @@ */ #include #include +#include +#include #include "iim.h" #include "hardware.h" @@ -20,8 +22,15 @@ static int mx25_cpu_rev = -1; static int mx25_read_cpu_rev(void) { u32 rev; + void __iomem *iim_base; + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx25-iim"); + iim_base = of_iomap(np, 0); + BUG_ON(!iim_base); + rev = readl(iim_base + MXC_IIMSREV); + iounmap(iim_base); - rev = __raw_readl(MX25_IO_ADDRESS(MX25_IIM_BASE_ADDR + MXC_IIMSREV)); switch (rev) { case 0x00: return IMX_CHIP_REVISION_1_0; diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index d76d08623f9f945ad95cb211f317c2d8c42f3c7c..8e21ccc1eda25a0c45109e2b20c5d63f02bf99f8 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -9,7 +9,6 @@ #include #include #include -#include #include "common.h" #include "cpuidle.h" diff --git a/arch/arm/mach-imx/cpuidle-imx6sl.c b/arch/arm/mach-imx/cpuidle-imx6sl.c index 7d92e658455162bcb6ce25d84f6b9894895d3834..5742a9fd1ef29c5d367924115ccb5fe859051633 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sl.c +++ b/arch/arm/mach-imx/cpuidle-imx6sl.c @@ -9,7 +9,6 @@ #include #include #include -#include #include "common.h" #include "cpuidle.h" diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c index 5a36722b089d60890448b7000e56301bff7d98e0..2c9f1a8bf24590cf21b6d8aea80938d1f966e77e 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sx.c +++ b/arch/arm/mach-imx/cpuidle-imx6sx.c @@ -10,7 +10,6 @@ #include #include #include -#include #include #include "common.h" diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h deleted file mode 100644 index 61a114cddc3966110cdecd368c76f4be4f48a3e2..0000000000000000000000000000000000000000 --- a/arch/arm/mach-imx/devices-imx25.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include "devices/devices-common.h" - -extern const struct imx_fec_data imx25_fec_data; -#define imx25_add_fec(pdata) \ - imx_add_fec(&imx25_fec_data, pdata) - -extern const struct imx_flexcan_data imx25_flexcan_data[]; -#define imx25_add_flexcan(id) \ - imx_add_flexcan(&imx25_flexcan_data[id]) -#define imx25_add_flexcan0() imx25_add_flexcan(0) -#define imx25_add_flexcan1() imx25_add_flexcan(1) - -extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data; -#define imx25_add_fsl_usb2_udc(pdata) \ - imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata) - -extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data; -#define imx25_add_imxdi_rtc() \ - imx_add_imxdi_rtc(&imx25_imxdi_rtc_data) - -extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data; -#define imx25_add_imx2_wdt() \ - imx_add_imx2_wdt(&imx25_imx2_wdt_data) - -extern const struct imx_imx_fb_data imx25_imx_fb_data; -#define imx25_add_imx_fb(pdata) \ - imx_add_imx_fb(&imx25_imx_fb_data, pdata) - -extern const struct imx_imx_i2c_data imx25_imx_i2c_data[]; -#define imx25_add_imx_i2c(id, pdata) \ - imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata) -#define imx25_add_imx_i2c0(pdata) imx25_add_imx_i2c(0, pdata) -#define imx25_add_imx_i2c1(pdata) imx25_add_imx_i2c(1, pdata) -#define imx25_add_imx_i2c2(pdata) imx25_add_imx_i2c(2, pdata) - -extern const struct imx_imx_keypad_data imx25_imx_keypad_data; -#define imx25_add_imx_keypad(pdata) \ - imx_add_imx_keypad(&imx25_imx_keypad_data, pdata) - -extern const struct imx_imx_ssi_data imx25_imx_ssi_data[]; -#define imx25_add_imx_ssi(id, pdata) \ - imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata) - -extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[]; -#define imx25_add_imx_uart(id, pdata) \ - imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata) -#define imx25_add_imx_uart0(pdata) imx25_add_imx_uart(0, pdata) -#define imx25_add_imx_uart1(pdata) imx25_add_imx_uart(1, pdata) -#define imx25_add_imx_uart2(pdata) imx25_add_imx_uart(2, pdata) -#define imx25_add_imx_uart3(pdata) imx25_add_imx_uart(3, pdata) -#define imx25_add_imx_uart4(pdata) imx25_add_imx_uart(4, pdata) - -extern const struct imx_mx2_camera_data imx25_mx2_camera_data; -#define imx25_add_mx2_camera(pdata) \ - imx_add_mx2_camera(&imx25_mx2_camera_data, pdata) - -extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data; -#define imx25_add_mxc_ehci_otg(pdata) \ - imx_add_mxc_ehci(&imx25_mxc_ehci_otg_data, pdata) -extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data; -#define imx25_add_mxc_ehci_hs(pdata) \ - imx_add_mxc_ehci(&imx25_mxc_ehci_hs_data, pdata) - -extern const struct imx_mxc_nand_data imx25_mxc_nand_data; -#define imx25_add_mxc_nand(pdata) \ - imx_add_mxc_nand(&imx25_mxc_nand_data, pdata) - -extern const struct imx_sdhci_esdhc_imx_data imx25_sdhci_esdhc_imx_data[]; -#define imx25_add_sdhci_esdhc_imx(id, pdata) \ - imx_add_sdhci_esdhc_imx(&imx25_sdhci_esdhc_imx_data[id], pdata) - -extern const struct imx_spi_imx_data imx25_cspi_data[]; -#define imx25_add_spi_imx(id, pdata) \ - imx_add_spi_imx(&imx25_cspi_data[id], pdata) -#define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata) -#define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata) -#define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata) diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index 1d2cc1805f3e51d00f4f7db8d0e3f1cad318a0f0..3a552989248ed309020a0c159480f8c569f71dc9 100644 --- a/arch/arm/mach-imx/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -21,9 +21,6 @@ config IMX_HAVE_PLATFORM_IMX27_CODA config IMX_HAVE_PLATFORM_IMX2_WDT bool -config IMX_HAVE_PLATFORM_IMXDI_RTC - bool - config IMX_HAVE_PLATFORM_IMX_FB bool diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index 8fdb12b4ca7ee12d12b9798e66d60c3dbac998fe..e5cf587bc1a0ed346ec128e3ff7cff3f990a477d 100644 --- a/arch/arm/mach-imx/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -8,7 +8,6 @@ obj-y += platform-gpio-mxc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX27_CODA) += platform-imx27-coda.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o obj-y += platform-imx-dma.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o diff --git a/arch/arm/mach-imx/devices/platform-fec.c b/arch/arm/mach-imx/devices/platform-fec.c index d86f9250b4ee87292ce8758a4538cd64a8b4ac92..b403a4fe2892b3773f3b92ea6f8520b077269588 100644 --- a/arch/arm/mach-imx/devices/platform-fec.c +++ b/arch/arm/mach-imx/devices/platform-fec.c @@ -19,11 +19,6 @@ .irq = soc ## _INT_FEC, \ } -#ifdef CONFIG_SOC_IMX25 -const struct imx_fec_data imx25_fec_data __initconst = - imx_fec_data_entry_single(MX25, "imx25-fec"); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_fec_data imx27_fec_data __initconst = imx_fec_data_entry_single(MX27, "imx27-fec"); diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c index 23b0061347cba81f5fd8c63add9d8d57b7585d82..25e1de6f3a47fd5ebca7f7c0164e7706b4bece8c 100644 --- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c +++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c @@ -18,11 +18,6 @@ .irq = soc ## _INT_USB_OTG, \ } -#ifdef CONFIG_SOC_IMX25 -const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27"); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst = imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27"); diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c index 25a47c616b2d7c2b855eaf510b84b4d466b51d62..7df6328306f964dcf5c698f30c2bf4aeabb757f1 100644 --- a/arch/arm/mach-imx/devices/platform-imx-fb.c +++ b/arch/arm/mach-imx/devices/platform-imx-fb.c @@ -29,11 +29,6 @@ const struct imx_imx_fb_data imx21_imx_fb_data __initconst = imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K); #endif /* ifdef CONFIG_SOC_IMX21 */ -#ifdef CONFIG_SOC_IMX25 -const struct imx_imx_fb_data imx25_imx_fb_data __initconst = - imx_imx_fb_data_entry_single(MX25, "imx21-fb", SZ_16K); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_imx_fb_data imx27_imx_fb_data __initconst = imx_imx_fb_data_entry_single(MX27, "imx21-fb", SZ_4K); diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c index 644ac26898823ac617c5892a5c41571af254cf00..ae9791522fc80e70ac8df2dcd2791f8a3f341a6a 100644 --- a/arch/arm/mach-imx/devices/platform-imx-i2c.c +++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c @@ -31,16 +31,6 @@ const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst = imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K); #endif /* ifdef CONFIG_SOC_IMX21 */ -#ifdef CONFIG_SOC_IMX25 -const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = { -#define imx25_imx_i2c_data_entry(_id, _hwid) \ - imx_imx_i2c_data_entry(MX25, "imx21-i2c", _id, _hwid, SZ_16K) - imx25_imx_i2c_data_entry(0, 1), - imx25_imx_i2c_data_entry(1, 2), - imx25_imx_i2c_data_entry(2, 3), -}; -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = { #define imx27_imx_i2c_data_entry(_id, _hwid) \ diff --git a/arch/arm/mach-imx/devices/platform-imx-keypad.c b/arch/arm/mach-imx/devices/platform-imx-keypad.c index f42200b7aca96044b8d10dbedb10cfe680ab5a80..479e4d70dbf92c43812124f72add5cd6d87d21c0 100644 --- a/arch/arm/mach-imx/devices/platform-imx-keypad.c +++ b/arch/arm/mach-imx/devices/platform-imx-keypad.c @@ -21,11 +21,6 @@ const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst = imx_imx_keypad_data_entry_single(MX21, SZ_16); #endif /* ifdef CONFIG_SOC_IMX21 */ -#ifdef CONFIG_SOC_IMX25 -const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst = - imx_imx_keypad_data_entry_single(MX25, SZ_16K); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst = imx_imx_keypad_data_entry_single(MX27, SZ_16); diff --git a/arch/arm/mach-imx/devices/platform-imx-ssi.c b/arch/arm/mach-imx/devices/platform-imx-ssi.c index 1c7c721ebff1ba04ef2f73e1025aace0758769c1..6f0e94eb29eeec2c549a0110beb3234357e9c08d 100644 --- a/arch/arm/mach-imx/devices/platform-imx-ssi.c +++ b/arch/arm/mach-imx/devices/platform-imx-ssi.c @@ -30,15 +30,6 @@ const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX21 */ -#ifdef CONFIG_SOC_IMX25 -const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst = { -#define imx25_imx_ssi_data_entry(_id, _hwid) \ - imx_imx_ssi_data_entry(MX25, _id, _hwid, SZ_4K) - imx25_imx_ssi_data_entry(0, 1), - imx25_imx_ssi_data_entry(1, 2), -}; -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = { #define imx27_imx_ssi_data_entry(_id, _hwid) \ diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c index 8c01836bc1d4b03c8df84a28cda9cc433d9a825c..6962cff4a9504569cc333b6e538bdbc54dfa1a36 100644 --- a/arch/arm/mach-imx/devices/platform-imx-uart.c +++ b/arch/arm/mach-imx/devices/platform-imx-uart.c @@ -47,18 +47,6 @@ const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = { }; #endif -#ifdef CONFIG_SOC_IMX25 -const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst = { -#define imx25_imx_uart_data_entry(_id, _hwid) \ - imx_imx_uart_1irq_data_entry(MX25, _id, _hwid, SZ_16K) - imx25_imx_uart_data_entry(0, 1), - imx25_imx_uart_data_entry(1, 2), - imx25_imx_uart_data_entry(2, 3), - imx25_imx_uart_data_entry(3, 4), - imx25_imx_uart_data_entry(4, 5), -}; -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = { #define imx27_imx_uart_data_entry(_id, _hwid) \ diff --git a/arch/arm/mach-imx/devices/platform-imx2-wdt.c b/arch/arm/mach-imx/devices/platform-imx2-wdt.c index 54f63bc25ca4d1e7974668577324ef2b61285a07..8c134c8d7500349f1040cca3fcad40ea851a1bcd 100644 --- a/arch/arm/mach-imx/devices/platform-imx2-wdt.c +++ b/arch/arm/mach-imx/devices/platform-imx2-wdt.c @@ -25,11 +25,6 @@ const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst = imx_imx2_wdt_data_entry_single(MX21, 0, , SZ_4K); #endif /* ifdef CONFIG_SOC_IMX21 */ -#ifdef CONFIG_SOC_IMX25 -const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst = - imx_imx2_wdt_data_entry_single(MX25, 0, , SZ_16K); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst = imx_imx2_wdt_data_entry_single(MX27, 0, , SZ_4K); diff --git a/arch/arm/mach-imx/devices/platform-imxdi_rtc.c b/arch/arm/mach-imx/devices/platform-imxdi_rtc.c deleted file mode 100644 index 5bb490d556eaa9dab0d26ba77ba5d77e4aba1d5b..0000000000000000000000000000000000000000 --- a/arch/arm/mach-imx/devices/platform-imxdi_rtc.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include - -#include "../hardware.h" -#include "devices-common.h" - -#define imx_imxdi_rtc_data_entry_single(soc) \ - { \ - .iobase = soc ## _DRYICE_BASE_ADDR, \ - .irq = soc ## _INT_DRYICE, \ - } - -#ifdef CONFIG_SOC_IMX25 -const struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst = - imx_imxdi_rtc_data_entry_single(MX25); -#endif /* ifdef CONFIG_SOC_IMX25 */ - -struct platform_device *__init imx_add_imxdi_rtc( - const struct imx_imxdi_rtc_data *data) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return imx_add_platform_device("imxdi_rtc", 0, - res, ARRAY_SIZE(res), NULL, 0); -} diff --git a/arch/arm/mach-imx/devices/platform-mx2-camera.c b/arch/arm/mach-imx/devices/platform-mx2-camera.c index b53e1f348f518f5de7ec9aa8745a7299d5c26df4..4c377c33242c75b31bfe8849a5662cb770486223 100644 --- a/arch/arm/mach-imx/devices/platform-mx2-camera.c +++ b/arch/arm/mach-imx/devices/platform-mx2-camera.c @@ -27,11 +27,6 @@ .irqemmaprp = soc ## _INT_EMMAPRP, \ } -#ifdef CONFIG_SOC_IMX25 -const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst = - imx_mx2_camera_data_entry_single(MX25, "imx25-camera"); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst = imx_mx2_camera_data_entry_single_emma(MX27, "imx27-camera"); diff --git a/arch/arm/mach-imx/devices/platform-mxc-ehci.c b/arch/arm/mach-imx/devices/platform-mxc-ehci.c index 296353662ff025dac519c7cffbb112f601dc007f..4537abd2a8f23df0d8323165473f65aca6258015 100644 --- a/arch/arm/mach-imx/devices/platform-mxc-ehci.c +++ b/arch/arm/mach-imx/devices/platform-mxc-ehci.c @@ -18,13 +18,6 @@ .irq = soc ## _INT_USB_ ## hs, \ } -#ifdef CONFIG_SOC_IMX25 -const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst = - imx_mxc_ehci_data_entry_single(MX25, 0, OTG); -const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst = - imx_mxc_ehci_data_entry_single(MX25, 1, HS); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst = imx_mxc_ehci_data_entry_single(MX27, 0, OTG); diff --git a/arch/arm/mach-imx/devices/platform-mxc_nand.c b/arch/arm/mach-imx/devices/platform-mxc_nand.c index fa618a34f4625f6df8a5759116434fcd682eda18..676df4920c7b6d6e06a7e86309c5d1455a3c1648 100644 --- a/arch/arm/mach-imx/devices/platform-mxc_nand.c +++ b/arch/arm/mach-imx/devices/platform-mxc_nand.c @@ -34,11 +34,6 @@ const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst = imx_mxc_nand_data_entry_single(MX21, "imx21-nand", SZ_4K); #endif /* ifdef CONFIG_SOC_IMX21 */ -#ifdef CONFIG_SOC_IMX25 -const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst = - imx_mxc_nand_data_entry_single(MX25, "imx25-nand", SZ_8K); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst = imx_mxc_nand_data_entry_single(MX27, "imx27-nand", SZ_4K); diff --git a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c index fb8d4a2ad48c0629b3cfbbe7c2b76c6646c9b436..a5edd7d60266985472ac9de11e6fb9801f8eadeb 100644 --- a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c +++ b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Pengutronix, Wolfram Sang + * Copyright (C) 2010 Pengutronix, Wolfram Sang * * This program is free software; you can redistribute it and/or modify it under * the terms of the GNU General Public License version 2 as published by the diff --git a/arch/arm/mach-imx/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c index aca825d74c48761dabcecc6f54467520036bc698..5e9707b47f92925078200bdd363982617ece4996 100644 --- a/arch/arm/mach-imx/devices/platform-spi_imx.c +++ b/arch/arm/mach-imx/devices/platform-spi_imx.c @@ -39,17 +39,6 @@ const struct imx_spi_imx_data imx21_cspi_data[] __initconst = { }; #endif -#ifdef CONFIG_SOC_IMX25 -/* i.mx25 has the i.mx35 type cspi */ -const struct imx_spi_imx_data imx25_cspi_data[] __initconst = { -#define imx25_cspi_data_entry(_id, _hwid) \ - imx_spi_imx_data_entry(MX25, CSPI, "imx35-cspi", _id, _hwid, SZ_16K) - imx25_cspi_data_entry(0, 1), - imx25_cspi_data_entry(1, 2), - imx25_cspi_data_entry(2, 3), -}; -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_spi_imx_data imx27_cspi_data[] __initconst = { #define imx27_cspi_data_entry(_id, _hwid) \ diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c deleted file mode 100644 index 42a5a3d14c5f32d3804a78b58e9c7730eea39206..0000000000000000000000000000000000000000 --- a/arch/arm/mach-imx/ehci-imx25.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Copyright (c) 2009 Daniel Mack - * Copyright (C) 2010 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY - * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - */ - -#include -#include -#include - -#include "ehci.h" -#include "hardware.h" - -#define USBCTRL_OTGBASE_OFFSET 0x600 - -#define MX25_OTG_SIC_SHIFT 29 -#define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT) -#define MX25_OTG_PM_BIT (1 << 24) -#define MX25_OTG_PP_BIT (1 << 11) -#define MX25_OTG_OCPOL_BIT (1 << 3) - -#define MX25_H1_SIC_SHIFT 21 -#define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) -#define MX25_H1_PP_BIT (1 << 18) -#define MX25_H1_PM_BIT (1 << 16) -#define MX25_H1_IPPUE_UP_BIT (1 << 7) -#define MX25_H1_IPPUE_DOWN_BIT (1 << 6) -#define MX25_H1_TLL_BIT (1 << 5) -#define MX25_H1_USBTE_BIT (1 << 4) -#define MX25_H1_OCPOL_BIT (1 << 2) - -int mx25_initialize_usb_hw(int port, unsigned int flags) -{ - unsigned int v; - - v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); - - switch (port) { - case 0: /* OTG port */ - v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT | - MX25_OTG_OCPOL_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT; - - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX25_OTG_PM_BIT; - - if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) - v |= MX25_OTG_PP_BIT; - - if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) - v |= MX25_OTG_OCPOL_BIT; - - break; - case 1: /* H1 port */ - v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT | - MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | MX25_H1_USBTE_BIT | - MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT; - - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX25_H1_PM_BIT; - - if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) - v |= MX25_H1_PP_BIT; - - if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) - v |= MX25_H1_OCPOL_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX25_H1_TLL_BIT; - - if (flags & MXC_EHCI_INTERNAL_PHY) - v |= MX25_H1_USBTE_BIT; - - if (flags & MXC_EHCI_IPPUE_DOWN) - v |= MX25_H1_IPPUE_DOWN_BIT; - - if (flags & MXC_EHCI_IPPUE_UP) - v |= MX25_H1_IPPUE_UP_BIT; - - break; - default: - return -EINVAL; - } - - writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); - - return 0; -} - diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c deleted file mode 100644 index e77cc3af6db2b4f3a4b7d5bceac36c53660283d4..0000000000000000000000000000000000000000 --- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c +++ /dev/null @@ -1,310 +0,0 @@ -/* - * Copyright (C) 2010 Eric Benard - eric@eukrea.com - * - * Based on pcm970-baseboard.c which is : - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include -#include -#include -#include -#include -#include