Loading Documentation/networking/ip-sysctl.txt +2 −2 Original line number Diff line number Diff line Loading @@ -738,8 +738,8 @@ rp_filter - INTEGER to prevent IP spoofing from DDos attacks. If using asymmetric routing or other complicated routing, then loose mode is recommended. conf/all/rp_filter must also be set to non-zero to do source validation on the interface The max value from conf/{all,interface}/rp_filter is used when doing source validation on the {interface}. Default value is 0. Note that some distributions enable it in startup scripts. Loading drivers/net/atl1e/atl1e_main.c +0 −36 Original line number Diff line number Diff line Loading @@ -1664,41 +1664,6 @@ static int atl1e_tso_csum(struct atl1e_adapter *adapter, } return 0; } if (offload_type & SKB_GSO_TCPV6) { real_len = (((unsigned char *)ipv6_hdr(skb) - skb->data) + ntohs(ipv6_hdr(skb)->payload_len)); if (real_len < skb->len) pskb_trim(skb, real_len); /* check payload == 0 byte ? */ hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb)); if (unlikely(skb->len == hdr_len)) { /* only xsum need */ dev_warn(&pdev->dev, "IPV6 tso with zero data??\n"); goto check_sum; } else { tcp_hdr(skb)->check = ~csum_ipv6_magic( &ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr, 0, IPPROTO_TCP, 0); tpd->word3 |= 1 << TPD_IP_VERSION_SHIFT; hdr_len >>= 1; tpd->word3 |= (hdr_len & TPD_V6_IPHLLO_MASK) << TPD_V6_IPHLLO_SHIFT; tpd->word3 |= ((hdr_len >> 3) & TPD_V6_IPHLHI_MASK) << TPD_V6_IPHLHI_SHIFT; tpd->word3 |= (tcp_hdrlen(skb) >> 2 & TPD_TCPHDRLEN_MASK) << TPD_TCPHDRLEN_SHIFT; tpd->word3 |= ((skb_shinfo(skb)->gso_size) & TPD_MSS_MASK) << TPD_MSS_SHIFT; tpd->word3 |= 1 << TPD_SEGMENT_EN_SHIFT; } } return 0; } check_sum: Loading Loading @@ -2287,7 +2252,6 @@ static int atl1e_init_netdev(struct net_device *netdev, struct pci_dev *pdev) NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; netdev->features |= NETIF_F_LLTX; netdev->features |= NETIF_F_TSO; netdev->features |= NETIF_F_TSO6; return 0; } Loading drivers/net/bnx2.c +1 −0 Original line number Diff line number Diff line Loading @@ -8316,6 +8316,7 @@ static pci_ers_result_t bnx2_io_slot_reset(struct pci_dev *pdev) } pci_set_master(pdev); pci_restore_state(pdev); pci_save_state(pdev); if (netif_running(dev)) { bnx2_set_power_state(bp, PCI_D0); Loading Loading
Documentation/networking/ip-sysctl.txt +2 −2 Original line number Diff line number Diff line Loading @@ -738,8 +738,8 @@ rp_filter - INTEGER to prevent IP spoofing from DDos attacks. If using asymmetric routing or other complicated routing, then loose mode is recommended. conf/all/rp_filter must also be set to non-zero to do source validation on the interface The max value from conf/{all,interface}/rp_filter is used when doing source validation on the {interface}. Default value is 0. Note that some distributions enable it in startup scripts. Loading
drivers/net/atl1e/atl1e_main.c +0 −36 Original line number Diff line number Diff line Loading @@ -1664,41 +1664,6 @@ static int atl1e_tso_csum(struct atl1e_adapter *adapter, } return 0; } if (offload_type & SKB_GSO_TCPV6) { real_len = (((unsigned char *)ipv6_hdr(skb) - skb->data) + ntohs(ipv6_hdr(skb)->payload_len)); if (real_len < skb->len) pskb_trim(skb, real_len); /* check payload == 0 byte ? */ hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb)); if (unlikely(skb->len == hdr_len)) { /* only xsum need */ dev_warn(&pdev->dev, "IPV6 tso with zero data??\n"); goto check_sum; } else { tcp_hdr(skb)->check = ~csum_ipv6_magic( &ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr, 0, IPPROTO_TCP, 0); tpd->word3 |= 1 << TPD_IP_VERSION_SHIFT; hdr_len >>= 1; tpd->word3 |= (hdr_len & TPD_V6_IPHLLO_MASK) << TPD_V6_IPHLLO_SHIFT; tpd->word3 |= ((hdr_len >> 3) & TPD_V6_IPHLHI_MASK) << TPD_V6_IPHLHI_SHIFT; tpd->word3 |= (tcp_hdrlen(skb) >> 2 & TPD_TCPHDRLEN_MASK) << TPD_TCPHDRLEN_SHIFT; tpd->word3 |= ((skb_shinfo(skb)->gso_size) & TPD_MSS_MASK) << TPD_MSS_SHIFT; tpd->word3 |= 1 << TPD_SEGMENT_EN_SHIFT; } } return 0; } check_sum: Loading Loading @@ -2287,7 +2252,6 @@ static int atl1e_init_netdev(struct net_device *netdev, struct pci_dev *pdev) NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; netdev->features |= NETIF_F_LLTX; netdev->features |= NETIF_F_TSO; netdev->features |= NETIF_F_TSO6; return 0; } Loading
drivers/net/bnx2.c +1 −0 Original line number Diff line number Diff line Loading @@ -8316,6 +8316,7 @@ static pci_ers_result_t bnx2_io_slot_reset(struct pci_dev *pdev) } pci_set_master(pdev); pci_restore_state(pdev); pci_save_state(pdev); if (netif_running(dev)) { bnx2_set_power_state(bp, PCI_D0); Loading