Loading drivers/bcma/Kconfig +1 −1 Original line number Diff line number Diff line Loading @@ -48,7 +48,7 @@ config BCMA_DRIVER_MIPS config BCMA_SFLASH bool depends on BCMA_DRIVER_MIPS && BROKEN depends on BCMA_DRIVER_MIPS default y config BCMA_NFLASH Loading drivers/bcma/bcma_private.h +1 −0 Original line number Diff line number Diff line Loading @@ -54,6 +54,7 @@ u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc); #ifdef CONFIG_BCMA_SFLASH /* driver_chipcommon_sflash.c */ int bcma_sflash_init(struct bcma_drv_cc *cc); extern struct platform_device bcma_sflash_dev; #else static inline int bcma_sflash_init(struct bcma_drv_cc *cc) { Loading drivers/bcma/driver_chipcommon_sflash.c +120 −3 Original line number Diff line number Diff line Loading @@ -5,15 +5,132 @@ * Licensed under the GNU/GPL. See COPYING for details. */ #include <linux/platform_device.h> #include <linux/bcma/bcma.h> #include <linux/bcma/bcma_driver_chipcommon.h> #include <linux/delay.h> #include "bcma_private.h" static struct resource bcma_sflash_resource = { .name = "bcma_sflash", .start = BCMA_SFLASH, .end = 0, .flags = IORESOURCE_MEM | IORESOURCE_READONLY, }; struct platform_device bcma_sflash_dev = { .name = "bcma_sflash", .resource = &bcma_sflash_resource, .num_resources = 1, }; struct bcma_sflash_tbl_e { char *name; u32 id; u32 blocksize; u16 numblocks; }; static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = { { "", 0x14, 0x10000, 32, }, { 0 }, }; static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = { { 0 }, }; static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = { { 0 }, }; static void bcma_sflash_cmd(struct bcma_drv_cc *cc, u32 opcode) { int i; bcma_cc_write32(cc, BCMA_CC_FLASHCTL, BCMA_CC_FLASHCTL_START | opcode); for (i = 0; i < 1000; i++) { if (!(bcma_cc_read32(cc, BCMA_CC_FLASHCTL) & BCMA_CC_FLASHCTL_BUSY)) return; cpu_relax(); } bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n"); } /* Initialize serial flash access */ int bcma_sflash_init(struct bcma_drv_cc *cc) { bcma_err(cc->core->bus, "Serial flash support is broken\n"); struct bcma_bus *bus = cc->core->bus; struct bcma_sflash *sflash = &cc->sflash; struct bcma_sflash_tbl_e *e; u32 id, id2; switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { case BCMA_CC_FLASHT_STSER: bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_DP); bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 0); bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES); id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA); bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 1); bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES); id2 = bcma_cc_read32(cc, BCMA_CC_FLASHDATA); switch (id) { case 0xbf: for (e = bcma_sflash_sst_tbl; e->name; e++) { if (e->id == id2) break; } break; default: for (e = bcma_sflash_st_tbl; e->name; e++) { if (e->id == id) break; } break; } if (!e->name) { bcma_err(bus, "Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n", id, id2); return -ENOTSUPP; } break; case BCMA_CC_FLASHT_ATSER: bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS); id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA) & 0x3c; for (e = bcma_sflash_at_tbl; e->name; e++) { if (e->id == id) break; } if (!e->name) { bcma_err(bus, "Unsupported Atmel serial flash (id: 0x%X)\n", id); return -ENOTSUPP; } break; default: bcma_err(bus, "Unsupported flash type\n"); return -ENOTSUPP; } sflash->window = BCMA_SFLASH; sflash->blocksize = e->blocksize; sflash->numblocks = e->numblocks; sflash->size = sflash->blocksize * sflash->numblocks; sflash->present = true; bcma_info(bus, "Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n", e->name, sflash->size / 1024, sflash->blocksize, sflash->numblocks); /* Prepare platform device, but don't register it yet. It's too early, * malloc (required by device_private_init) is not available yet. */ bcma_sflash_dev.resource[0].end = bcma_sflash_dev.resource[0].start + sflash->size; bcma_sflash_dev.dev.platform_data = sflash; return 0; } drivers/bcma/main.c +9 −0 Original line number Diff line number Diff line Loading @@ -7,6 +7,7 @@ #include "bcma_private.h" #include <linux/module.h> #include <linux/platform_device.h> #include <linux/bcma/bcma.h> #include <linux/slab.h> Loading Loading @@ -136,6 +137,14 @@ static int bcma_register_cores(struct bcma_bus *bus) dev_id++; } #ifdef CONFIG_BCMA_SFLASH if (bus->drv_cc.sflash.present) { err = platform_device_register(&bcma_sflash_dev); if (err) bcma_err(bus, "Error registering serial flash\n"); } #endif return 0; } Loading include/linux/bcma/bcma_driver_chipcommon.h +13 −0 Original line number Diff line number Diff line Loading @@ -509,6 +509,16 @@ struct bcma_pflash { u32 window_size; }; #ifdef CONFIG_BCMA_SFLASH struct bcma_sflash { bool present; u32 window; u32 blocksize; u16 numblocks; u32 size; }; #endif struct bcma_serial_port { void *regs; unsigned long clockspeed; Loading @@ -529,6 +539,9 @@ struct bcma_drv_cc { struct bcma_chipcommon_pmu pmu; #ifdef CONFIG_BCMA_DRIVER_MIPS struct bcma_pflash pflash; #ifdef CONFIG_BCMA_SFLASH struct bcma_sflash sflash; #endif int nr_serial_ports; struct bcma_serial_port serial_ports[4]; Loading Loading
drivers/bcma/Kconfig +1 −1 Original line number Diff line number Diff line Loading @@ -48,7 +48,7 @@ config BCMA_DRIVER_MIPS config BCMA_SFLASH bool depends on BCMA_DRIVER_MIPS && BROKEN depends on BCMA_DRIVER_MIPS default y config BCMA_NFLASH Loading
drivers/bcma/bcma_private.h +1 −0 Original line number Diff line number Diff line Loading @@ -54,6 +54,7 @@ u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc); #ifdef CONFIG_BCMA_SFLASH /* driver_chipcommon_sflash.c */ int bcma_sflash_init(struct bcma_drv_cc *cc); extern struct platform_device bcma_sflash_dev; #else static inline int bcma_sflash_init(struct bcma_drv_cc *cc) { Loading
drivers/bcma/driver_chipcommon_sflash.c +120 −3 Original line number Diff line number Diff line Loading @@ -5,15 +5,132 @@ * Licensed under the GNU/GPL. See COPYING for details. */ #include <linux/platform_device.h> #include <linux/bcma/bcma.h> #include <linux/bcma/bcma_driver_chipcommon.h> #include <linux/delay.h> #include "bcma_private.h" static struct resource bcma_sflash_resource = { .name = "bcma_sflash", .start = BCMA_SFLASH, .end = 0, .flags = IORESOURCE_MEM | IORESOURCE_READONLY, }; struct platform_device bcma_sflash_dev = { .name = "bcma_sflash", .resource = &bcma_sflash_resource, .num_resources = 1, }; struct bcma_sflash_tbl_e { char *name; u32 id; u32 blocksize; u16 numblocks; }; static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = { { "", 0x14, 0x10000, 32, }, { 0 }, }; static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = { { 0 }, }; static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = { { 0 }, }; static void bcma_sflash_cmd(struct bcma_drv_cc *cc, u32 opcode) { int i; bcma_cc_write32(cc, BCMA_CC_FLASHCTL, BCMA_CC_FLASHCTL_START | opcode); for (i = 0; i < 1000; i++) { if (!(bcma_cc_read32(cc, BCMA_CC_FLASHCTL) & BCMA_CC_FLASHCTL_BUSY)) return; cpu_relax(); } bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n"); } /* Initialize serial flash access */ int bcma_sflash_init(struct bcma_drv_cc *cc) { bcma_err(cc->core->bus, "Serial flash support is broken\n"); struct bcma_bus *bus = cc->core->bus; struct bcma_sflash *sflash = &cc->sflash; struct bcma_sflash_tbl_e *e; u32 id, id2; switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { case BCMA_CC_FLASHT_STSER: bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_DP); bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 0); bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES); id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA); bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 1); bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES); id2 = bcma_cc_read32(cc, BCMA_CC_FLASHDATA); switch (id) { case 0xbf: for (e = bcma_sflash_sst_tbl; e->name; e++) { if (e->id == id2) break; } break; default: for (e = bcma_sflash_st_tbl; e->name; e++) { if (e->id == id) break; } break; } if (!e->name) { bcma_err(bus, "Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n", id, id2); return -ENOTSUPP; } break; case BCMA_CC_FLASHT_ATSER: bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS); id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA) & 0x3c; for (e = bcma_sflash_at_tbl; e->name; e++) { if (e->id == id) break; } if (!e->name) { bcma_err(bus, "Unsupported Atmel serial flash (id: 0x%X)\n", id); return -ENOTSUPP; } break; default: bcma_err(bus, "Unsupported flash type\n"); return -ENOTSUPP; } sflash->window = BCMA_SFLASH; sflash->blocksize = e->blocksize; sflash->numblocks = e->numblocks; sflash->size = sflash->blocksize * sflash->numblocks; sflash->present = true; bcma_info(bus, "Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n", e->name, sflash->size / 1024, sflash->blocksize, sflash->numblocks); /* Prepare platform device, but don't register it yet. It's too early, * malloc (required by device_private_init) is not available yet. */ bcma_sflash_dev.resource[0].end = bcma_sflash_dev.resource[0].start + sflash->size; bcma_sflash_dev.dev.platform_data = sflash; return 0; }
drivers/bcma/main.c +9 −0 Original line number Diff line number Diff line Loading @@ -7,6 +7,7 @@ #include "bcma_private.h" #include <linux/module.h> #include <linux/platform_device.h> #include <linux/bcma/bcma.h> #include <linux/slab.h> Loading Loading @@ -136,6 +137,14 @@ static int bcma_register_cores(struct bcma_bus *bus) dev_id++; } #ifdef CONFIG_BCMA_SFLASH if (bus->drv_cc.sflash.present) { err = platform_device_register(&bcma_sflash_dev); if (err) bcma_err(bus, "Error registering serial flash\n"); } #endif return 0; } Loading
include/linux/bcma/bcma_driver_chipcommon.h +13 −0 Original line number Diff line number Diff line Loading @@ -509,6 +509,16 @@ struct bcma_pflash { u32 window_size; }; #ifdef CONFIG_BCMA_SFLASH struct bcma_sflash { bool present; u32 window; u32 blocksize; u16 numblocks; u32 size; }; #endif struct bcma_serial_port { void *regs; unsigned long clockspeed; Loading @@ -529,6 +539,9 @@ struct bcma_drv_cc { struct bcma_chipcommon_pmu pmu; #ifdef CONFIG_BCMA_DRIVER_MIPS struct bcma_pflash pflash; #ifdef CONFIG_BCMA_SFLASH struct bcma_sflash sflash; #endif int nr_serial_ports; struct bcma_serial_port serial_ports[4]; Loading