Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit cde9efef authored by Russell King's avatar Russell King
Browse files

Merge branch 'ux500-core' of... 

Merge branch 'ux500-core' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into devel-stable
parents 50401d77 60ebe156

arch/arm/Kconfig

+1 −0
Original line number Diff line number Diff line
@@ -798,6 +798,7 @@ config ARCH_U8500 
	select GENERIC_CLOCKEVENTS

	select COMMON_CLKDEV

	select ARCH_REQUIRE_GPIOLIB

	select ARCH_HAS_CPUFREQ

	help

	  Support for ST-Ericsson's Ux500 architecture

arch/arm/mach-ux500/Makefile

+8 −6
Original line number Diff line number Diff line
@@ -2,14 +2,16 @@ 
# Makefile for the linux kernel, U8500 machine.

#



obj-y				:= clock.o cpu.o devices.o

obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o devices-db5500.o

obj-y				:= clock.o cpu.o devices.o devices-common.o

obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o dma-db5500.o

obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o prcmu.o

obj-$(CONFIG_MACH_U8500_MOP)	+= board-mop500.o board-mop500-sdi.o

obj-$(CONFIG_MACH_U5500)	+= board-u5500.o

obj-$(CONFIG_MACH_U8500_MOP)	+= board-mop500.o board-mop500-sdi.o \

				board-mop500-keypads.o

obj-$(CONFIG_MACH_U5500)	+= board-u5500.o board-u5500-sdi.o

obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o

obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o

obj-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o

obj-$(CONFIG_REGULATOR_AB8500)	+= board-mop500-regulators.o

obj-$(CONFIG_U5500_MODEM_IRQ)	+= modem_irq.o

obj-$(CONFIG_U5500_MBOX)	+= mbox.o
 
obj-$(CONFIG_U5500_MODEM_IRQ)	+= modem-irq-db5500.o

obj-$(CONFIG_U5500_MBOX)	+= mbox-db5500.o

obj-$(CONFIG_CPU_FREQ)		+= cpufreq.o

arch/arm/mach-ux500/board-mop500-keypads.c

0 → 100644
+229 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) ST-Ericsson SA 2010

 *

 * License Terms: GNU General Public License v2

 *

 * Keypad layouts for various boards

 */



#include <linux/i2c.h>

#include <linux/gpio.h>

#include <linux/interrupt.h>

#include <linux/platform_device.h>

#include <linux/mfd/stmpe.h>

#include <linux/mfd/tc3589x.h>

#include <linux/input/matrix_keypad.h>



#include <plat/pincfg.h>

#include <plat/ske.h>



#include <mach/devices.h>

#include <mach/hardware.h>



#include "devices-db8500.h"

#include "board-mop500.h"



/* STMPE/SKE keypad use this key layout */

static const unsigned int mop500_keymap[] = {

	KEY(2, 5, KEY_END),

	KEY(4, 1, KEY_POWER),

	KEY(3, 5, KEY_VOLUMEDOWN),

	KEY(1, 3, KEY_3),

	KEY(5, 2, KEY_RIGHT),

	KEY(5, 0, KEY_9),



	KEY(0, 5, KEY_MENU),

	KEY(7, 6, KEY_ENTER),

	KEY(4, 5, KEY_0),

	KEY(6, 7, KEY_2),

	KEY(3, 4, KEY_UP),

	KEY(3, 3, KEY_DOWN),



	KEY(6, 4, KEY_SEND),

	KEY(6, 2, KEY_BACK),

	KEY(4, 2, KEY_VOLUMEUP),

	KEY(5, 5, KEY_1),

	KEY(4, 3, KEY_LEFT),

	KEY(3, 2, KEY_7),

};



static const struct matrix_keymap_data mop500_keymap_data = {

	.keymap		= mop500_keymap,

	.keymap_size    = ARRAY_SIZE(mop500_keymap),

};



/*

 * Nomadik SKE keypad

 */

#define ROW_PIN_I0      164

#define ROW_PIN_I1      163

#define ROW_PIN_I2      162

#define ROW_PIN_I3      161

#define ROW_PIN_I4      156

#define ROW_PIN_I5      155

#define ROW_PIN_I6      154

#define ROW_PIN_I7      153

#define COL_PIN_O0      168

#define COL_PIN_O1      167

#define COL_PIN_O2      166

#define COL_PIN_O3      165

#define COL_PIN_O4      160

#define COL_PIN_O5      159

#define COL_PIN_O6      158

#define COL_PIN_O7      157



#define SKE_KPD_MAX_ROWS	8

#define SKE_KPD_MAX_COLS	8



static int ske_kp_rows[] = {

	ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3,

	ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7,

};



/*

 * ske_set_gpio_row: request and set gpio rows

 */

static int ske_set_gpio_row(int gpio)

{

	int ret;



	ret = gpio_request(gpio, "ske-kp");

	if (ret < 0) {

		pr_err("ske_set_gpio_row: gpio request failed\n");

		return ret;

	}



	ret = gpio_direction_output(gpio, 1);

	if (ret < 0) {

		pr_err("ske_set_gpio_row: gpio direction failed\n");

		gpio_free(gpio);

	}



	return ret;

}



/*

 * ske_kp_init - enable the gpio configuration

 */

static int ske_kp_init(void)

{

	int ret, i;



	for (i = 0; i < SKE_KPD_MAX_ROWS; i++) {

		ret = ske_set_gpio_row(ske_kp_rows[i]);

		if (ret < 0) {

			pr_err("ske_kp_init: failed init\n");

			return ret;

		}

	}



	return 0;

}



static struct ske_keypad_platform_data ske_keypad_board = {

	.init		= ske_kp_init,

	.keymap_data    = &mop500_keymap_data,

	.no_autorepeat  = true,

	.krow		= SKE_KPD_MAX_ROWS,     /* 8x8 matrix */

	.kcol		= SKE_KPD_MAX_COLS,

	.debounce_ms    = 40,			/* in millisecs */

};



/*

 * STMPE1601

 */

static struct stmpe_keypad_platform_data stmpe1601_keypad_data = {

	.debounce_ms    = 64,

	.scan_count     = 8,

	.no_autorepeat  = true,

	.keymap_data    = &mop500_keymap_data,

};



static struct stmpe_platform_data stmpe1601_data = {

	.id             = 1,

	.blocks         = STMPE_BLOCK_KEYPAD,

	.irq_trigger    = IRQF_TRIGGER_FALLING,

	.irq_base       = MOP500_STMPE1601_IRQ(0),

	.keypad         = &stmpe1601_keypad_data,

	.autosleep      = true,

	.autosleep_timeout = 1024,

};



static struct i2c_board_info mop500_i2c0_devices_stuib[] = {

	{

		I2C_BOARD_INFO("stmpe1601", 0x40),

		.irq = NOMADIK_GPIO_TO_IRQ(218),

		.platform_data = &stmpe1601_data,

		.flags = I2C_CLIENT_WAKE,

	},

};



/*

 * TC35893

 */



static const unsigned int uib_keymap[] = {

	KEY(3, 1, KEY_END),

	KEY(4, 1, KEY_POWER),

	KEY(6, 4, KEY_VOLUMEDOWN),

	KEY(4, 2, KEY_EMAIL),

	KEY(3, 3, KEY_RIGHT),

	KEY(2, 5, KEY_BACKSPACE),



	KEY(6, 7, KEY_MENU),

	KEY(5, 0, KEY_ENTER),

	KEY(4, 3, KEY_0),

	KEY(3, 4, KEY_DOT),

	KEY(5, 2, KEY_UP),

	KEY(3, 5, KEY_DOWN),



	KEY(4, 5, KEY_SEND),

	KEY(0, 5, KEY_BACK),

	KEY(6, 2, KEY_VOLUMEUP),

	KEY(1, 3, KEY_SPACE),

	KEY(7, 6, KEY_LEFT),

	KEY(5, 5, KEY_SEARCH),

};



static struct matrix_keymap_data uib_keymap_data = {

	.keymap         = uib_keymap,

	.keymap_size    = ARRAY_SIZE(uib_keymap),

};



static struct tc3589x_keypad_platform_data tc35893_data = {

	.krow = TC_KPD_ROWS,

	.kcol = TC_KPD_COLUMNS,

	.debounce_period = TC_KPD_DEBOUNCE_PERIOD,

	.settle_time = TC_KPD_SETTLE_TIME,

	.irqtype = IRQF_TRIGGER_FALLING,

	.enable_wakeup = true,

	.keymap_data    = &uib_keymap_data,

	.no_autorepeat  = true,

};



static struct tc3589x_platform_data tc3589x_keypad_data = {

	.block = TC3589x_BLOCK_KEYPAD,

	.keypad = &tc35893_data,

	.irq_base = MOP500_EGPIO_IRQ_BASE,

};



static struct i2c_board_info mop500_i2c0_devices_uib[] = {

	{

		I2C_BOARD_INFO("tc3589x", 0x44),

		.platform_data = &tc3589x_keypad_data,

		.irq = NOMADIK_GPIO_TO_IRQ(218),

		.flags = I2C_CLIENT_WAKE,

	},

};



void mop500_keypad_init(void)

{

	db8500_add_ske_keypad(&ske_keypad_board);



	i2c_register_board_info(0, mop500_i2c0_devices_stuib,

			ARRAY_SIZE(mop500_i2c0_devices_stuib));



	i2c_register_board_info(0, mop500_i2c0_devices_uib,

			ARRAY_SIZE(mop500_i2c0_devices_uib));



}

arch/arm/mach-ux500/board-mop500-sdi.c

+74 −5
Original line number Diff line number Diff line
@@ -16,10 +16,24 @@ 
#include <mach/devices.h>

#include <mach/hardware.h>



#include "devices-db8500.h"

#include "pins-db8500.h"

#include "board-mop500.h"



static pin_cfg_t mop500_sdi_pins[] = {

	/* SDI0 (MicroSD slot) */

	GPIO18_MC0_CMDDIR,

	GPIO19_MC0_DAT0DIR,

	GPIO20_MC0_DAT2DIR,

	GPIO21_MC0_DAT31DIR,

	GPIO22_MC0_FBCLK,

	GPIO23_MC0_CLK,

	GPIO24_MC0_CMD,

	GPIO25_MC0_DAT0,

	GPIO26_MC0_DAT1,

	GPIO27_MC0_DAT2,

	GPIO28_MC0_DAT3,



	/* SDI4 (on-board eMMC) */

	GPIO197_MC4_DAT3,

	GPIO198_MC4_DAT2,
@@ -49,6 +63,55 @@ static pin_cfg_t mop500_sdi2_pins[] = { 
	GPIO138_MC2_DAT7,

};



/*

 * SDI 0 (MicroSD slot)

 */



/* MMCIPOWER bits */

#define MCI_DATA2DIREN		(1 << 2)

#define MCI_CMDDIREN		(1 << 3)

#define MCI_DATA0DIREN		(1 << 4)

#define MCI_DATA31DIREN		(1 << 5)

#define MCI_FBCLKEN		(1 << 7)



static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd,

				   unsigned char power_mode)

{

	if (power_mode == MMC_POWER_UP)

		gpio_set_value_cansleep(GPIO_SDMMC_EN, 1);

	else if (power_mode == MMC_POWER_OFF)

		gpio_set_value_cansleep(GPIO_SDMMC_EN, 0);



	return MCI_FBCLKEN | MCI_CMDDIREN | MCI_DATA0DIREN |

	       MCI_DATA2DIREN | MCI_DATA31DIREN;

}



static struct mmci_platform_data mop500_sdi0_data = {

	.vdd_handler	= mop500_sdi0_vdd_handler,

	.ocr_mask	= MMC_VDD_29_30,

	.f_max		= 100000000,

	.capabilities	= MMC_CAP_4_BIT_DATA,

	.gpio_cd	= GPIO_SDMMC_CD,

	.gpio_wp	= -1,

};



void mop500_sdi_tc35892_init(void)

{

	int ret;



	ret = gpio_request(GPIO_SDMMC_EN, "SDMMC_EN");

	if (!ret)

		ret = gpio_request(GPIO_SDMMC_1V8_3V_SEL,

				   "GPIO_SDMMC_1V8_3V_SEL");

	if (ret)

		return;



	gpio_direction_output(GPIO_SDMMC_1V8_3V_SEL, 1);

	gpio_direction_output(GPIO_SDMMC_EN, 0);



	db8500_add_sdi0(&mop500_sdi0_data);

}



/*

 * SDI 2 (POP eMMC, not on DB8500ed)

 */
@@ -74,18 +137,24 @@ static struct mmci_platform_data mop500_sdi4_data = { 
	.gpio_wp	= -1,

};



void mop500_sdi_init(void)

void __init mop500_sdi_init(void)

{

	nmk_config_pins(mop500_sdi_pins, ARRAY_SIZE(mop500_sdi_pins));



	u8500_sdi2_device.dev.platform_data = &mop500_sdi2_data;

	u8500_sdi4_device.dev.platform_data = &mop500_sdi4_data;

	/*

	 * sdi0 will finally be added when the TC35892 initializes and calls

	 * mop500_sdi_tc35892_init() above.

	 */



	/* PoP:ed eMMC */

	if (!cpu_is_u8500ed()) {

		nmk_config_pins(mop500_sdi2_pins, ARRAY_SIZE(mop500_sdi2_pins));

		amba_device_register(&u8500_sdi2_device, &iomem_resource);

		/* POP eMMC on v1.0 has problems with high speed */

		if (!cpu_is_u8500v10())

			mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;

		db8500_add_sdi2(&mop500_sdi2_data);

	}



	/* On-board eMMC */

	amba_device_register(&u8500_sdi4_device, &iomem_resource);

	db8500_add_sdi4(&mop500_sdi4_data);

}

arch/arm/mach-ux500/board-mop500.c

+62 −166
Original line number Diff line number Diff line
@@ -13,25 +13,26 @@ 
#include <linux/interrupt.h>

#include <linux/platform_device.h>

#include <linux/io.h>

#include <linux/i2c.h>

#include <linux/gpio.h>

#include <linux/amba/bus.h>

#include <linux/amba/pl022.h>

#include <linux/spi/spi.h>

#include <linux/mfd/ab8500.h>

#include <linux/input/matrix_keypad.h>

#include <linux/mfd/tc3589x.h>



#include <asm/mach-types.h>

#include <asm/mach/arch.h>



#include <plat/pincfg.h>

#include <plat/i2c.h>

#include <plat/ske.h>



#include <mach/hardware.h>

#include <mach/setup.h>

#include <mach/devices.h>

#include <mach/irqs.h>



#include "devices-db8500.h"

#include "pins-db8500.h"

#include "board-mop500.h"
@@ -69,22 +70,12 @@ static pin_cfg_t mop500_pins[] = { 
	GPIO166_KP_O2,

	GPIO167_KP_O1,

	GPIO168_KP_O0,

};



static void ab4500_spi_cs_control(u32 command)

{

	/* set the FRM signal, which is CS  - TODO */

}

	/* GPIO_EXP_INT */

	GPIO217_GPIO,



struct pl022_config_chip ab4500_chip_info = {

	.com_mode = INTERRUPT_TRANSFER,

	.iface = SSP_INTERFACE_MOTOROLA_SPI,

	/* we can act as master only */

	.hierarchy = SSP_MASTER,

	.slave_tx_disable = 0,

	.rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,

	.tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,

	.cs_control = ab4500_spi_cs_control,

	/* STMPE1601 IRQ */

	GPIO218_GPIO    | PIN_INPUT_PULLUP,

};



static struct ab8500_platform_data ab8500_platdata = {
@@ -93,8 +84,8 @@ static struct ab8500_platform_data ab8500_platdata = { 


static struct resource ab8500_resources[] = {

	[0] = {

		.start = IRQ_AB8500,

		.end = IRQ_AB8500,

		.start	= IRQ_DB8500_AB8500,

		.end	= IRQ_DB8500_AB8500,

		.flags	= IORESOURCE_IRQ

	}

};
@@ -109,19 +100,6 @@ struct platform_device ab8500_device = { 
	.resource = ab8500_resources,

};



static struct spi_board_info ab8500_spi_devices[] = {

	{

		.modalias = "ab8500-spi",

		.controller_data = &ab4500_chip_info,

		.platform_data = &ab8500_platdata,

		.max_speed_hz = 12000000,

		.bus_num = 0,

		.chip_select = 0,

		.mode = SPI_MODE_3,

		.irq = IRQ_DB8500_AB8500,

	},

};



static struct pl022_ssp_controller ssp0_platform_data = {

	.bus_id = 0,

	/* pl022 not yet supports dma */
@@ -132,6 +110,34 @@ static struct pl022_ssp_controller ssp0_platform_data = { 
	.num_chipselect = 5,

};



/*

 * TC35892

 */



static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)

{

	mop500_sdi_tc35892_init();

}



static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {

	.gpio_base	= MOP500_EGPIO(0),

	.setup		= mop500_tc35892_init,

};



static struct tc3589x_platform_data mop500_tc35892_data = {

	.block		= TC3589x_BLOCK_GPIO,

	.gpio		= &mop500_tc35892_gpio_data,

	.irq_base	= MOP500_EGPIO_IRQ_BASE,

};



static struct i2c_board_info mop500_i2c0_devices[] = {

	{

		I2C_BOARD_INFO("tc3589x", 0x42),

		.irq            = NOMADIK_GPIO_TO_IRQ(217),

		.platform_data  = &mop500_tc35892_data,

	},

};



#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \

static struct nmk_i2c_controller u8500_i2c##id##_data = { \

	/*				\
@@ -161,159 +167,49 @@ U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); 
U8500_I2C_CONTROLLER(2,	0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);

U8500_I2C_CONTROLLER(3,	0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);



static struct amba_device *amba_devs[] __initdata = {

	&ux500_uart0_device,

	&ux500_uart1_device,

	&ux500_uart2_device,

	&u8500_ssp0_device,

};



static const unsigned int ux500_keymap[] = {

	KEY(2, 5, KEY_END),

	KEY(4, 1, KEY_POWER),

	KEY(3, 5, KEY_VOLUMEDOWN),

	KEY(1, 3, KEY_3),

	KEY(5, 2, KEY_RIGHT),

	KEY(5, 0, KEY_9),



	KEY(0, 5, KEY_MENU),

	KEY(7, 6, KEY_ENTER),

	KEY(4, 5, KEY_0),

	KEY(6, 7, KEY_2),

	KEY(3, 4, KEY_UP),

	KEY(3, 3, KEY_DOWN),



	KEY(6, 4, KEY_SEND),

	KEY(6, 2, KEY_BACK),

	KEY(4, 2, KEY_VOLUMEUP),

	KEY(5, 5, KEY_1),

	KEY(4, 3, KEY_LEFT),

	KEY(3, 2, KEY_7),

};



static const struct matrix_keymap_data ux500_keymap_data = {

	.keymap         = ux500_keymap,

	.keymap_size    = ARRAY_SIZE(ux500_keymap),

};



/*

 * Nomadik SKE keypad

 */

#define ROW_PIN_I0      164

#define ROW_PIN_I1      163

#define ROW_PIN_I2      162

#define ROW_PIN_I3      161

#define ROW_PIN_I4      156

#define ROW_PIN_I5      155

#define ROW_PIN_I6      154

#define ROW_PIN_I7      153

#define COL_PIN_O0      168

#define COL_PIN_O1      167

#define COL_PIN_O2      166

#define COL_PIN_O3      165

#define COL_PIN_O4      160

#define COL_PIN_O5      159

#define COL_PIN_O6      158

#define COL_PIN_O7      157



#define SKE_KPD_MAX_ROWS        8

#define SKE_KPD_MAX_COLS        8



static int ske_kp_rows[] = {

	ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3,

	ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7,

};



/*

 * ske_set_gpio_row: request and set gpio rows

 */

static int ske_set_gpio_row(int gpio)

static void __init mop500_i2c_init(void)

{

	int ret;



	ret = gpio_request(gpio, "ske-kp");

	if (ret < 0) {

		pr_err("ske_set_gpio_row: gpio request failed\n");

		return ret;

	}



	ret = gpio_direction_output(gpio, 1);

	if (ret < 0) {

		pr_err("ske_set_gpio_row: gpio direction failed\n");

		gpio_free(gpio);

	db8500_add_i2c0(&u8500_i2c0_data);

	db8500_add_i2c1(&u8500_i2c1_data);

	db8500_add_i2c2(&u8500_i2c2_data);

	db8500_add_i2c3(&u8500_i2c3_data);

}



	return ret;

}

/* add any platform devices here - TODO */

static struct platform_device *platform_devs[] __initdata = {

};



/*

 * ske_kp_init - enable the gpio configuration

 */

static int ske_kp_init(void)

static void __init mop500_spi_init(void)

{

	int ret, i;



	for (i = 0; i < SKE_KPD_MAX_ROWS; i++) {

		ret = ske_set_gpio_row(ske_kp_rows[i]);

		if (ret < 0) {

			pr_err("ske_kp_init: failed init\n");

			return ret;

		}

	db8500_add_ssp0(&ssp0_platform_data);

}



	return 0;

static void __init mop500_uart_init(void)

{

	db8500_add_uart0();

	db8500_add_uart1();

	db8500_add_uart2();

}



static struct ske_keypad_platform_data ske_keypad_board = {

	.init           = ske_kp_init,

	.keymap_data    = &ux500_keymap_data,

	.no_autorepeat  = true,

	.krow           = SKE_KPD_MAX_ROWS,     /* 8x8 matrix */

	.kcol           = SKE_KPD_MAX_COLS,

	.debounce_ms    = 40,                   /* in millsecs */

};







/* add any platform devices here - TODO */

static struct platform_device *platform_devs[] __initdata = {

	&u8500_i2c0_device,

	&ux500_i2c1_device,

	&ux500_i2c2_device,

	&ux500_i2c3_device,

	&ux500_ske_keypad_device,

};



static void __init u8500_init_machine(void)

{

	int i;



	u8500_init_devices();



	nmk_config_pins(mop500_pins, ARRAY_SIZE(mop500_pins));



	u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data;

	ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data;

	ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data;

	ux500_i2c3_device.dev.platform_data = &u8500_i2c3_data;

	ux500_ske_keypad_device.dev.platform_data = &ske_keypad_board;



	u8500_ssp0_device.dev.platform_data = &ssp0_platform_data;



	/* Register the active AMBA devices on this board */

	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)

		amba_device_register(amba_devs[i], &iomem_resource);



	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));



	mop500_i2c_init();

	mop500_sdi_init();

	mop500_spi_init();

	mop500_uart_init();



	mop500_keypad_init();



	/* If HW is early drop (ED) or V1.0 then use SPI to access AB8500 */

	if (cpu_is_u8500ed() || cpu_is_u8500v10())

		spi_register_board_info(ab8500_spi_devices,

			ARRAY_SIZE(ab8500_spi_devices));

	else /* If HW is v.1.1 or later use I2C to access AB8500 */

	platform_device_register(&ab8500_device);



	i2c_register_board_info(0, mop500_i2c0_devices,

				ARRAY_SIZE(mop500_i2c0_devices));

}



MACHINE_START(U8500, "ST-Ericsson MOP500 platform")