Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit ca82a6e7 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman
Browse files

staging: comedi: adl_pci9118: remove PCI9118_EXTDEBUG and DPRINTK



These macros enable a bunch of function trace messages. These should
not be in the final driver.

Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent ae34f6aa
Loading
Loading
Loading
Loading
+0 −117
Original line number Diff line number Diff line
@@ -81,18 +81,6 @@ Configuration options:
				 * correct channel number on every 12 bit sample
				 */

#undef PCI9118_EXTDEBUG		/*
				 * if defined then driver prints
				 * a lot of messages
				 */

#undef DPRINTK
#ifdef PCI9118_EXTDEBUG
#define DPRINTK(fmt, args...) printk(fmt, ## args)
#else
#define DPRINTK(fmt, args...)
#endif

#define IORANGE_9118 	64	/* I hope */
#define PCI9118_CHANLEN	255	/*
				 * len of chanlist, some source say 256,
@@ -721,7 +709,6 @@ static void interrupt_pci9118_ai_dma(struct comedi_device *dev,

	samplesinbuf = devpriv->dmabuf_use_size[devpriv->dma_actbuf] >> 1;
					/* number of received real samples */
/* DPRINTK("dma_actbuf=%d\n",devpriv->dma_actbuf); */

	if (devpriv->dma_doublebuf) {	/*
					 * switch DMA buffers if is used
@@ -743,17 +730,12 @@ static void interrupt_pci9118_ai_dma(struct comedi_device *dev,
						 * how many samples is to
						 * end of buffer
						 */
/*
 * DPRINTK("samps=%d m=%d %d %d\n",
 * samplesinbuf,m,s->async->buf_int_count,s->async->buf_int_ptr);
 */
		sampls = m;
		move_block_from_dma(dev, s,
				    devpriv->dmabuf_virt[devpriv->dma_actbuf],
				    samplesinbuf);
		m = m - sampls;		/* m= how many samples was transferred */
	}
/* DPRINTK("YYY\n"); */

	if (!devpriv->ai_neverending)
		if (devpriv->ai_act_scan >= devpriv->ai_scans) {
@@ -793,14 +775,6 @@ static irqreturn_t interrupt_pci9118(int irq, void *d)
	int_amcc = inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR);
					/* get INT register from AMCC chip */

/*
 * DPRINTK("INT daq=0x%01x amcc=0x%08x MWAR=0x%08x
 * MWTC=0x%08x ADSTAT=0x%02x ai_do=%d\n",
 * int_daq, int_amcc, inl(devpriv->iobase_a+AMCC_OP_REG_MWAR),
 * inl(devpriv->iobase_a+AMCC_OP_REG_MWTC),
 * inw(dev->iobase+PCI9118_ADSTAT)&0x1ff,devpriv->ai_do);
 */

	if ((!int_daq) && (!(int_amcc & ANY_S593X_INT)))
		return IRQ_NONE;	/* interrupt from other source */

@@ -1152,11 +1126,8 @@ static int Compute_and_setup_dma(struct comedi_device *dev)
	struct pci9118_private *devpriv = dev->private;
	unsigned int dmalen0, dmalen1, i;

	DPRINTK("adl_pci9118 EDBG: BGN: Compute_and_setup_dma()\n");
	dmalen0 = devpriv->dmabuf_size[0];
	dmalen1 = devpriv->dmabuf_size[1];
	DPRINTK("1 dmalen0=%d dmalen1=%d ai_data_len=%d\n", dmalen0, dmalen1,
		devpriv->ai_data_len);
	/* isn't output buff smaller that our DMA buff? */
	if (dmalen0 > (devpriv->ai_data_len)) {
		dmalen0 = devpriv->ai_data_len & ~3L;	/*
@@ -1168,7 +1139,6 @@ static int Compute_and_setup_dma(struct comedi_device *dev)
							 * align to 32bit down
							 */
	}
	DPRINTK("2 dmalen0=%d dmalen1=%d\n", dmalen0, dmalen1);

	/* we want wake up every scan? */
	if (devpriv->ai_flags & TRIG_WAKE_EOS) {
@@ -1183,11 +1153,6 @@ static int Compute_and_setup_dma(struct comedi_device *dev)
		} else {
			/* short first DMA buffer to one scan */
			dmalen0 = devpriv->ai_n_realscanlen << 1;
			DPRINTK
				("21 dmalen0=%d ai_n_realscanlen=%d "
							"useeoshandle=%d\n",
				dmalen0, devpriv->ai_n_realscanlen,
				devpriv->useeoshandle);
			if (devpriv->useeoshandle)
				dmalen0 += 2;
			if (dmalen0 < 4) {
@@ -1211,11 +1176,6 @@ static int Compute_and_setup_dma(struct comedi_device *dev)
		} else {
			/* short second DMA buffer to one scan */
			dmalen1 = devpriv->ai_n_realscanlen << 1;
			DPRINTK
			    ("22 dmalen1=%d ai_n_realscanlen=%d "
							"useeoshandle=%d\n",
			     dmalen1, devpriv->ai_n_realscanlen,
			     devpriv->useeoshandle);
			if (devpriv->useeoshandle)
				dmalen1 -= 2;
			if (dmalen1 < 4) {
@@ -1228,7 +1188,6 @@ static int Compute_and_setup_dma(struct comedi_device *dev)
		}
	}

	DPRINTK("3 dmalen0=%d dmalen1=%d\n", dmalen0, dmalen1);
	/* transfer without TRIG_WAKE_EOS */
	if (!(devpriv->ai_flags & TRIG_WAKE_EOS)) {
		/* if it's possible then align DMA buffers to length of scan */
@@ -1255,15 +1214,9 @@ static int Compute_and_setup_dma(struct comedi_device *dev)
			if (dmalen0 >
			    ((devpriv->ai_n_realscanlen << 1) *
			     devpriv->ai_scans)) {
				DPRINTK
				    ("3.0 ai_n_realscanlen=%d ai_scans=%d\n",
				     devpriv->ai_n_realscanlen,
				     devpriv->ai_scans);
				dmalen0 =
				    (devpriv->ai_n_realscanlen << 1) *
				    devpriv->ai_scans;
				DPRINTK("3.1 dmalen0=%d dmalen1=%d\n", dmalen0,
					dmalen1);
				dmalen0 &= ~3L;
			} else {	/*
					 * fits whole measure into
@@ -1275,21 +1228,16 @@ static int Compute_and_setup_dma(struct comedi_device *dev)
					dmalen1 =
					    (devpriv->ai_n_realscanlen << 1) *
					    devpriv->ai_scans - dmalen0;
				DPRINTK("3.2 dmalen0=%d dmalen1=%d\n", dmalen0,
					dmalen1);
				dmalen1 &= ~3L;
			}
		}
	}

	DPRINTK("4 dmalen0=%d dmalen1=%d\n", dmalen0, dmalen1);

	/* these DMA buffer size will be used */
	devpriv->dma_actbuf = 0;
	devpriv->dmabuf_use_size[0] = dmalen0;
	devpriv->dmabuf_use_size[1] = dmalen1;

	DPRINTK("5 dmalen0=%d dmalen1=%d\n", dmalen0, dmalen1);
#if 0
	if (devpriv->ai_n_scanlen < this_board->half_fifo_size) {
		devpriv->dmabuf_panic_size[0] =
@@ -1322,7 +1270,6 @@ static int Compute_and_setup_dma(struct comedi_device *dev)
			devpriv->iobase_a + AMCC_OP_REG_INTCSR);
						/* allow bus mastering */

	DPRINTK("adl_pci9118 EDBG: END: Compute_and_setup_dma()\n");
	return 0;
}

@@ -1334,8 +1281,6 @@ static int pci9118_ai_docmd_sampl(struct comedi_device *dev,
{
	struct pci9118_private *devpriv = dev->private;

	DPRINTK("adl_pci9118 EDBG: BGN: pci9118_ai_docmd_sampl(%d,) [%d]\n",
		dev->minor, devpriv->ai_do);
	switch (devpriv->ai_do) {
	case 1:
		devpriv->AdControlReg |= AdControl_TmrTr;
@@ -1382,7 +1327,6 @@ static int pci9118_ai_docmd_sampl(struct comedi_device *dev,
		outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL);
	}

	DPRINTK("adl_pci9118 EDBG: END: pci9118_ai_docmd_sampl()\n");
	return 0;
}

@@ -1394,8 +1338,6 @@ static int pci9118_ai_docmd_dma(struct comedi_device *dev,
{
	struct pci9118_private *devpriv = dev->private;

	DPRINTK("adl_pci9118 EDBG: BGN: pci9118_ai_docmd_dma(%d,) [%d,%d]\n",
		dev->minor, devpriv->ai_do, devpriv->usedma);
	Compute_and_setup_dma(dev);

	switch (devpriv->ai_do) {
@@ -1458,7 +1400,6 @@ static int pci9118_ai_docmd_dma(struct comedi_device *dev,
		outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL);
	}

	DPRINTK("adl_pci9118 EDBG: BGN: pci9118_ai_docmd_dma()\n");
	return 0;
}

@@ -1473,7 +1414,6 @@ static int pci9118_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
	unsigned int addchans = 0;
	int ret = 0;

	DPRINTK("adl_pci9118 EDBG: BGN: pci9118_ai_cmd(%d,)\n", dev->minor);
	devpriv->ai12_startstop = 0;
	devpriv->ai_flags = cmd->flags;
	devpriv->ai_n_chan = cmd->chanlist_len;
@@ -1522,10 +1462,6 @@ static int pci9118_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
		devpriv->usessh = 0;
				/*  no */

	DPRINTK("1 neverending=%d scans=%u usessh=%d ai_startstop=0x%2x\n",
		devpriv->ai_neverending, devpriv->ai_scans, devpriv->usessh,
		devpriv->ai12_startstop);

	/*
	 * use additional sample at end of every scan
	 * to satisty DMA 32 bit transfer?
@@ -1606,12 +1542,6 @@ static int pci9118_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
	     devpriv->ai_add_back) * (devpriv->ai_n_scanlen /
				      devpriv->ai_n_chan);

	DPRINTK("2 usedma=%d realscan=%d af=%u n_chan=%d ab=%d n_scanlen=%d\n",
		devpriv->usedma,
		devpriv->ai_n_realscanlen, devpriv->ai_add_front,
		devpriv->ai_n_chan, devpriv->ai_add_back,
		devpriv->ai_n_scanlen);

	/* check and setup channel list */
	if (!check_channel_list(dev, s, devpriv->ai_n_chan,
				devpriv->ai_chanlist, devpriv->ai_add_front,
@@ -1708,7 +1638,6 @@ static int pci9118_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
	else
		ret = pci9118_ai_docmd_sampl(dev, s);

	DPRINTK("adl_pci9118 EDBG: END: pci9118_ai_cmd()\n");
	return ret;
}

@@ -1780,11 +1709,6 @@ static int setup_channel_list(struct comedi_device *dev,
	unsigned int i, differencial = 0, bipolar = 0;
	unsigned int scanquad, gain, ssh = 0x00;

	DPRINTK
	    ("adl_pci9118 EDBG: BGN: setup_channel_list"
						"(%d,.,%d,.,%d,%d,%d,%d)\n",
	     dev->minor, n_chan, rot, frontadd, backadd, usedma);

	if (usedma == 1) {
		rot = 8;
		usedma = 0;
@@ -1829,7 +1753,6 @@ static int setup_channel_list(struct comedi_device *dev,

	if (frontadd) {		/* insert channels for S&H */
		ssh = devpriv->softsshsample;
		DPRINTK("FA: %04x: ", ssh);
		for (i = 0; i < frontadd; i++) {
						/* store range list to card */
			scanquad = CR_CHAN(chanlist[0]);
@@ -1838,13 +1761,10 @@ static int setup_channel_list(struct comedi_device *dev,
						/* get gain number */
			scanquad |= ((gain & 0x03) << 8);
			outl(scanquad | ssh, dev->iobase + PCI9118_GAIN);
			DPRINTK("%02x ", scanquad | ssh);
			ssh = devpriv->softsshhold;
		}
		DPRINTK("\n ");
	}

	DPRINTK("SL: ", ssh);
	for (i = 0; i < n_chan; i++) {	/* store range list to card */
		scanquad = CR_CHAN(chanlist[i]);	/* get channel number */
#ifdef PCI9118_PARANOIDCHECK
@@ -1853,21 +1773,16 @@ static int setup_channel_list(struct comedi_device *dev,
		gain = CR_RANGE(chanlist[i]);		/* get gain number */
		scanquad |= ((gain & 0x03) << 8);
		outl(scanquad | ssh, dev->iobase + PCI9118_GAIN);
		DPRINTK("%02x ", scanquad | ssh);
	}
	DPRINTK("\n ");

	if (backadd) {		/* insert channels for fit onto 32bit DMA */
		DPRINTK("BA: %04x: ", ssh);
		for (i = 0; i < backadd; i++) {	/* store range list to card */
			scanquad = CR_CHAN(chanlist[0]);
							/* get channel number */
			gain = CR_RANGE(chanlist[0]);	/* get gain number */
			scanquad |= ((gain & 0x03) << 8);
			outl(scanquad | ssh, dev->iobase + PCI9118_GAIN);
			DPRINTK("%02x ", scanquad | ssh);
		}
		DPRINTK("\n ");
	}
#ifdef PCI9118_PARANOIDCHECK
	devpriv->chanlist[n_chan ^ usedma] = devpriv->chanlist[0 ^ usedma];
@@ -1884,18 +1799,10 @@ static int setup_channel_list(struct comedi_device *dev,
	} else {
		useeos = 1;
	}
#ifdef PCI9118_EXTDEBUG
	DPRINTK("CHL: ");
	for (i = 0; i <= (useeos * n_chan); i++)
		DPRINTK("%04x ", devpriv->chanlist[i]);

	DPRINTK("\n ");
#endif
#endif
	outl(0, dev->iobase + PCI9118_SCANMOD);	/* close scan queue */
	/* udelay(100); important delay, or first sample will be crippled */

	DPRINTK("adl_pci9118 EDBG: END: setup_channel_list()\n");
	return 1;		/* we can serve this with scan logic */
}

@@ -1913,10 +1820,6 @@ static void pci9118_calc_divisors(char mode, struct comedi_device *dev,
	const struct boardtype *this_board = comedi_board(dev);
	struct pci9118_private *devpriv = dev->private;

	DPRINTK
	    ("adl_pci9118 EDBG: BGN: pci9118_calc_divisors"
					"(%d,%d,.,%u,%u,%u,%d,.,.,,%u,%u)\n",
	     mode, dev->minor, *tim1, *tim2, flags, chans, usessh, chnsshfront);
	switch (mode) {
	case 1:
	case 4:
@@ -1924,32 +1827,18 @@ static void pci9118_calc_divisors(char mode, struct comedi_device *dev,
			*tim2 = this_board->ai_ns_min;
		i8253_cascade_ns_to_timer(devpriv->i8254_osc_base, div1, div2,
					  tim2, flags & TRIG_ROUND_NEAREST);
		DPRINTK("OSC base=%u div1=%u div2=%u timer1=%u\n",
			devpriv->i8254_osc_base, *div1, *div2, *tim1);
		break;
	case 2:
		if (*tim2 < this_board->ai_ns_min)
			*tim2 = this_board->ai_ns_min;
		DPRINTK("1 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2,
			*tim1, *tim2);
		*div1 = *tim2 / devpriv->i8254_osc_base;
						/* convert timer (burst) */
		DPRINTK("2 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2,
			*tim1, *tim2);
		if (*div1 < this_board->ai_pacer_min)
			*div1 = this_board->ai_pacer_min;
		DPRINTK("3 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2,
			*tim1, *tim2);
		*div2 = *tim1 / devpriv->i8254_osc_base;	/* scan timer */
		DPRINTK("4 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2,
			*tim1, *tim2);
		*div2 = *div2 / *div1;		/* major timer is c1*c2 */
		DPRINTK("5 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2,
			*tim1, *tim2);
		if (*div2 < chans)
			*div2 = chans;
		DPRINTK("6 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2,
			*tim1, *tim2);

		*tim2 = *div1 * devpriv->i8254_osc_base;
							/* real convert timer */
@@ -1958,15 +1847,9 @@ static void pci9118_calc_divisors(char mode, struct comedi_device *dev,
			if (*div2 < (chans + 2))
				*div2 = chans + 2;

		DPRINTK("7 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2,
			*tim1, *tim2);
		*tim1 = *div1 * *div2 * devpriv->i8254_osc_base;
		DPRINTK("OSC base=%u div1=%u div2=%u timer1=%u timer2=%u\n",
			devpriv->i8254_osc_base, *div1, *div2, *tim1, *tim2);
		break;
	}
	DPRINTK("adl_pci9118 EDBG: END: pci9118_calc_divisors(%u,%u)\n",
		*div1, *div2);
}

/*