Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit c1612edd authored by Pratham Pratap's avatar Pratham Pratap
Browse files

ARM: dts: msm: Add dp dm interrupts for SM6150 



Since SM6150 uses PDC interrupts, add dp dm interrupts
instead of hs_phy_irq. This change modifies the voltage
range for vdd according to the power grid, updates the
clock frequency and tx fifo size for secondary USB
controller. Since there is no PMIC support on RUMI,
delete extcon device node from rumi dts and change the
dr_mode to otg.

Change-Id: I6996ce1abd8fe5e398f265ef2aab15faf95242f0
Signed-off-by: default avatarPratham Pratap <prathampratap@codeaurora.org>
parent da0130a5

arch/arm64/boot/dts/qcom/sm6150-rumi.dtsi

+6 −1
Original line number Diff line number Diff line
@@ -191,11 +191,16 @@ 
};



&usb0 {

	/delete-property/ extcon;

	dwc3@a600000 {

		usb-phy = <&usb_emu_phy>, <&usb_nop_phy>;

		maximum-speed = "high-speed";

		dr_mode = "peripheral";

		dr_mode = "otg";

	};

};



&usb_qmp_phy {

	status = "disabled";

};



#include "sm6150-stub-regulator.dtsi"

arch/arm64/boot/dts/qcom/sm6150-usb.dtsi

+20 −19
Original line number Diff line number Diff line
@@ -26,8 +26,9 @@ 
		#size-cells = <1>;

		ranges;



		interrupts = <0 130 0>, <0 607 0>, <0 131 0>;

		interrupt-names = "pwr_event_irq", "ss_phy_irq", "hs_phy_irq";

		interrupts = <0 489 0>, <0 130 0>, <0 607 0>, <0 488 0>;

		interrupt-names = "dp_hs_phy_irq", "pwr_event_irq",

				"ss_phy_irq", "dm_hs_phy_irq";

		qcom,use-pdc-interrupts;



		USB3_GDSC-supply = <&usb30_prim_gdsc>;
@@ -49,7 +50,7 @@ 
		qcom,dwc-usb3-msm-tx-fifo-size = <21288>;



		qcom,msm-bus,name = "usb0";

		qcom,msm-bus,num-cases = <3>;

		qcom,msm-bus,num-cases = <4>;

		qcom,msm-bus,num-paths = <3>;

		qcom,msm-bus,vectors-KBps =

			/*  suspend vote */
@@ -86,8 +87,6 @@ 
			snps,has-lpm-erratum;

			snps,hird-threshold = /bits/ 8 <0x10>;

			snps,usb3_lpm_capable;

			snps,ssp-u3-u0-quirk;

			snps,usb3-u1u2-disable;

			usb-core-id = <0>;

			maximum-speed = "super-speed";

			dr_mode = "otg";
@@ -136,7 +135,7 @@ 
		vdd-supply = <&pm6150_l4>;

		vdda18-supply = <&pm6150_l11>;

		vdda33-supply = <&pm6150_l17>;

		qcom,vdd-voltage-level = <0 875000 875000>;

		qcom,vdd-voltage-level = <0 925000 975000>;

		qcom,tune2-efuse-bit-pos = <25>;

		qcom,tune2-efuse-num-bits = <4>;

		qcom,qusb-phy-init-seq = <0xf8 0x80
@@ -164,13 +163,13 @@ 


	/* Primary USB port related QMP USB PHY */

	usb_qmp_phy: ssphy@88e6000 {

		compatible = "qcom,usb-ssphy-qmp-dp-combo";

		compatible = "qcom,usb-ssphy-qmp-v2";

		reg = <0x88e6000 0x1000>;

		reg-names = "qmp_phy_base";



		vdd-supply = <&pm6150_l4>;

		core-supply = <&pm6150_l11>;

		qcom,vdd-voltage-level = <0 875000 875000>;

		qcom,vdd-voltage-level = <0 925000 975000>;

		qcom,core-voltage-level = <0 1800000 1800000>;

		qcom,qmp-phy-init-seq =

			/* <reg_offset, value, delay> */
@@ -292,13 +291,15 @@ 
			<&clock_gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,

			<&clock_rpmh RPMH_CXO_CLK>,

			<&clock_gcc GCC_USB3_PRIM_CLKREF_CLK>,

			<&clock_gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;

			<&clock_gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,

			<&clock_gcc GCC_AHB2PHY_WEST_CLK>;



		clock-names = "aux_clk", "pipe_clk", "ref_clk_src",

				"ref_clk", "com_aux_clk";

				"ref_clk", "com_aux_clk", "cfg_ahb_clk";



		resets = <&clock_gcc GCC_USB30_PRIM_BCR>;

		reset-names = "phy_reset";

		resets = <&clock_gcc GCC_USB3_DP_PHY_PRIM_SP0_BCR>,

			<&clock_gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;

		reset-names = "phy_phy_reset", "phy_reset";

	};



	usb_audio_qmi_dev {
@@ -324,8 +325,9 @@ 
		#size-cells = <1>;

		ranges;



		interrupts = <0 664 0>, <0 663 0>;

		interrupt-names = "pwr_event_irq", "hs_phy_irq";

		interrupts = <0 491 0>, <0 663 0>, <0 490 0>;

		interrupt-names = "dp_hs_phy_irq", "pwr_event_irq",

				"dm_hs_phy_irq";

		qcom,use-pdc-interrupts;



		USB3_GDSC-supply = <&usb20_sec_gdsc>;
@@ -341,10 +343,9 @@ 
		resets = <&clock_gcc GCC_USB20_SEC_BCR>;

		reset-names = "core_reset";



		qcom,core-clk-rate = <200000000>;

		qcom,core-clk-rate = <120000000>;

		qcom,core-clk-rate-hs = <66666667>;

		qcom,num-gsi-evt-buffs = <0x3>;

		qcom,dwc-usb3-msm-tx-fifo-size = <27696>;

		qcom,dwc-usb3-msm-tx-fifo-size = <21288>;

		qcom,charging-disabled;



		qcom,msm-bus,name = "usb1";
@@ -362,7 +363,7 @@ 
			compatible = "snps,dwc3";

			reg = <0xa800000 0xcd00>;

			interrupt-parent = <&intc>;

			interrupts = <0 665 0>;

			interrupts = <0 664 0>;

			usb-phy = <&qusb_phy1>, <&usb_nop_phy>;

			tx-fifo-resize;

			linux,sysdev_is_parent;
@@ -385,7 +386,7 @@ 
		vdd-supply = <&pm6150_l4>;

		vdda18-supply = <&pm6150_l11>;

		vdda33-supply = <&pm6150_l17>;

		qcom,vdd-voltage-level = <0 875000 875000>;

		qcom,vdd-voltage-level = <0 925000 975000>;

		qcom,qusb-phy-init-seq = <0xf8 0x80

					0xb3 0x84

					0x83 0x88

arch/arm64/boot/dts/qcom/sm6150.dtsi

+0 −1
Original line number Diff line number Diff line
@@ -2476,7 +2476,6 @@ 


&usb0 {

	extcon = <&pm6150_pdphy>;

	vbus_dwc3-supply = <&smb5_vbus>;

};



&pm6150_vadc {