Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit baabef90 authored by qctecmdr Service's avatar qctecmdr Service Committed by Gerrit - the friendly Code Review server
Browse files

Merge "usb: phy: Add Synopsys High Speed Femto PHY driver"

parents 3aa5cfb2 31f8a9f8

Documentation/devicetree/bindings/phy/qcom,snps-28nm-hs-usb.txt

0 → 100644
+76 −0
Original line number Diff line number Diff line 
Qualcomm Synopsys 28nm Femto phy controller

===========================================



Synopsys 28nm femto phy controller supports LS/FS/HS usb connectivity on

Qualcomm chipsets.



Required properties:

- compatible:

    Value type: <string>

    Definition: Should contain "qcom,usb-snps-hsphy".



- reg:

    Value type: <prop-encoded-array>

    Definition: USB PHY base address and length of the register map



- reg-names:

    Value type: <string>

    Definition: Names of the reg bases in 1-1 correspondence with the

		"reg" property. "phy_csr" is a mandatory reg base.



- clocks:

    Value type: <prop-encoded-array>

    Definition: See clock-bindings.txt section "consumers". List of

                two clock specifiers for interface and core controller

                clocks.



- clock-names:

    Value type: <string>

    Definition: Names of the clocks in 1-1 correspondence with the "clocks"

		property. Must contain "phy_csr_clk" and "ref_clk" clocks.



- vdd-supply:

    Value type: <phandle>

    Definition: phandle to the regulator VDD supply node.



- vdda18-supply:

    Value type: <phandle>

    Definition: phandle to the regulator 1.8V supply node.



- vdda33-supply:

    Value type: <phandle>

    Definition: phandle to the regulator 3.3V supply node.



- qcom,vdd-voltage-level:

    Value type: <prop-array>

    Definition: This is a list of three integer values (no, min, max) where

		each value corresponding to voltage corner.



- resets:

    Value type: <prop-encoded-array>

    Definition: See reset.txt section "consumers". PHY reset specifier.



- reset-names:

    Value type: <string>

    Definition: Must contain "phy_por_reset" and "phy_reset" strings.



Example:

	usb_phy: phy@78d9000 {

		compatible = "qcom,usb-snps-hsphy";

		reg = <0x78d9000 0x400>;

		reg-names = "phy_csr";



		vdd-supply = <&pm8916_s1_corner>;

		vdda18-supply = <&pm8916_l7>;

		vdda33-supply = <&pm8916_l13>;



		clocks = <&gcc GCC_USB_HS_AHB_CLK>,

			     <&gcc GCC_USB_HS_SYSTEM_CLK>;

		clock-names = "phy_csr_clk", "ref_clk";



		resets = <&gcc GCC_QUSB2_PHY_BCR>,

			 <&gcc GCC_USB2_HS_PHY_ONLY_BCR>;

		reset-names = "phy_por_reset", "phy_reset";



	};

drivers/usb/phy/Kconfig

+10 −0
Original line number Diff line number Diff line
@@ -145,6 +145,16 @@ config USB_ISP1301 
	  To compile this driver as a module, choose M here: the

	  module will be called phy-isp1301.



config MSM_SNPS_FEMTO_PHY

	tristate "MSM SNPS HSUSB PHY Driver"

	depends on ARCH_QCOM

	select USB_PHY

	help

	  Enable this to support the 28nm HSUSB PHY on MSM chips. This driver

	  supports the high-speed PHY which is usually paired with either

	  the ChipIdea or Synopsys DWC3 USB IPs on MSM SOCs. This driver expects

	  to configure the PHY with a dedicated register I/O memory region.



config USB_MSM_OTG

	tristate "Qualcomm on-chip USB OTG controller support"

	depends on (USB || USB_GADGET) && (ARCH_QCOM || COMPILE_TEST)

drivers/usb/phy/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -32,3 +32,4 @@ obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o 
obj-$(CONFIG_KEYSTONE_USB_PHY)		+= phy-keystone.o

obj-$(CONFIG_USB_MSM_SSPHY_QMP)     	+= phy-msm-ssusb-qmp.o

obj-$(CONFIG_MSM_HSUSB_PHY)		+= phy-msm-snps-hs.o

obj-$(CONFIG_MSM_SNPS_FEMTO_PHY)	+= phy-qcom-snps-28nm-hs.o

drivers/usb/phy/phy-qcom-snps-28nm-hs.c

0 → 100644
+617 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2009-2018, Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 */



#include <linux/module.h>

#include <linux/kernel.h>

#include <linux/err.h>

#include <linux/slab.h>

#include <linux/clk.h>

#include <linux/delay.h>

#include <linux/io.h>

#include <linux/of.h>

#include <linux/platform_device.h>

#include <linux/regulator/consumer.h>

#include <linux/regulator/driver.h>

#include <linux/regulator/machine.h>

#include <linux/usb/phy.h>

#include <linux/reset.h>



#include <linux/usb/msm_hsusb_hw.h>



#define MSM_USB_PHY_CSR_BASE			phy->phy_csr_regs

#define USB_HSPHY_3P3_VOL_MIN			3050000 /* uV */

#define USB_HSPHY_3P3_VOL_MAX			3300000 /* uV */

#define USB_HSPHY_3P3_HPM_LOAD			16000	/* uA */



#define USB_HSPHY_1P8_VOL_MIN			1704000 /* uV */

#define USB_HSPHY_1P8_VOL_MAX			1800000 /* uV */

#define USB_HSPHY_1P8_HPM_LOAD			19000	/* uA */



#define USB_HSPHY_MAX_REGULATORS		3



enum regulators {

	MSM_HSPHY_DVDD_REGULATOR,

	MSM_HSPHY_1P8_REGULATOR,

	MSM_HSPHY_3P3_REGULATOR,

	MSM_HSPHY_MAX_REGULATORS = USB_HSPHY_MAX_REGULATORS

};



struct msm_snps_hsphy {

	struct usb_phy		phy;

	void __iomem		*phy_csr_regs;



	struct clk		*phy_csr_clk;

	struct clk		*ref_clk;

	struct reset_control	*phy_reset;

	struct reset_control	*phy_por_reset;



	bool			dpdm_enable;

	struct regulator_dev	*dpdm_rdev;

	struct regulator_desc	dpdm_rdesc;



	int			*phy_init_seq;



	bool			suspended;

	bool			cable_connected;

	bool			clocks_enabled;



	int			voltage_levels[USB_HSPHY_MAX_REGULATORS][3];

	struct regulator_bulk_data	regulator[USB_HSPHY_MAX_REGULATORS];



	struct mutex		phy_lock;

};



static void msm_snps_hsphy_disable_clocks(struct msm_snps_hsphy *phy)

{

	dev_dbg(phy->phy.dev, "%s: clocks_enabled:%d\n",

			__func__, phy->clocks_enabled);



	if (!phy->clocks_enabled)

		return;



	clk_disable_unprepare(phy->phy_csr_clk);

	clk_disable_unprepare(phy->ref_clk);



	phy->clocks_enabled = false;

}



static void msm_snps_hsphy_enable_clocks(struct msm_snps_hsphy *phy)

{

	dev_dbg(phy->phy.dev, "%s: clocks_enabled:%d\n",

			__func__, phy->clocks_enabled);



	if (phy->clocks_enabled)

		return;



	clk_prepare_enable(phy->ref_clk);

	clk_prepare_enable(phy->phy_csr_clk);



	phy->clocks_enabled = true;

}



static int msm_snps_hsphy_config_regulators(struct msm_snps_hsphy *phy,

								int high)

{

	int min, ret, i;



	min = high ? 1 : 0; /* low or none? */



	for (i = 0; i < USB_HSPHY_MAX_REGULATORS; i++) {

		ret = regulator_set_voltage(phy->regulator[i].consumer,

						phy->voltage_levels[i][min],

						phy->voltage_levels[i][2]);

		if (ret) {

			dev_err(phy->phy.dev, "%s: unable to set voltage for hsusb %s regulator\n",

					__func__, phy->regulator[i].supply);

			return ret;

		}

		dev_dbg(phy->phy.dev, "%s: min_vol:%d max_vol:%d\n",

						phy->regulator[i].supply,

						phy->voltage_levels[i][min],

						phy->voltage_levels[i][2]);

	}



	return 0;

}

static int msm_snps_hsphy_disable_regulators(struct msm_snps_hsphy *phy)

{

	int ret = 0;



	dev_dbg(phy->phy.dev, "%s turn off regulators\n", __func__);



	mutex_lock(&phy->phy_lock);

	ret = regulator_bulk_disable(USB_HSPHY_MAX_REGULATORS, phy->regulator);



	ret = regulator_set_load(

			phy->regulator[MSM_HSPHY_1P8_REGULATOR].consumer, 0);

	if (ret)

		dev_err(phy->phy.dev, "Unable to set (0) HPM for vdda18\n");



	ret = regulator_set_load(

			phy->regulator[MSM_HSPHY_3P3_REGULATOR].consumer, 0);

	if (ret)

		dev_err(phy->phy.dev, "Unable to set (0) HPM for vdda33\n");



	ret = msm_snps_hsphy_config_regulators(phy, 0);



	mutex_unlock(&phy->phy_lock);



	return ret;

}



static int msm_snps_hsphy_enable_regulators(struct msm_snps_hsphy *phy)

{

	int ret = 0;



	dev_dbg(phy->phy.dev, "%s turn on regulators.\n", __func__);



	mutex_lock(&phy->phy_lock);

	ret = msm_snps_hsphy_config_regulators(phy, 1);

	if (ret) {

		mutex_unlock(&phy->phy_lock);

		return ret;

	}



	ret = regulator_set_load(

			phy->regulator[MSM_HSPHY_1P8_REGULATOR].consumer,

			USB_HSPHY_1P8_HPM_LOAD);

	if (ret < 0) {

		dev_err(phy->phy.dev, "Unable to set HPM of vdda18:%d\n", ret);

		goto unconfig_regulators;

	}



	ret = regulator_set_load(

			phy->regulator[MSM_HSPHY_3P3_REGULATOR].consumer,

			USB_HSPHY_3P3_HPM_LOAD);

	if (ret < 0) {

		dev_err(phy->phy.dev, "Unable to set HPM of vdda33:%d\n", ret);

		goto unset_1p8_load;

	}



	ret = regulator_bulk_enable(USB_HSPHY_MAX_REGULATORS, phy->regulator);

	if (ret)

		goto unset_3p3_load;



	mutex_unlock(&phy->phy_lock);



	dev_dbg(phy->phy.dev, "%s(): HSUSB PHY's regulators are turned ON.\n",

								__func__);

	return 0;



unset_3p3_load:

	regulator_set_load(phy->regulator[MSM_HSPHY_3P3_REGULATOR].consumer, 0);

unset_1p8_load:

	regulator_set_load(phy->regulator[MSM_HSPHY_1P8_REGULATOR].consumer, 0);

unconfig_regulators:

	msm_snps_hsphy_config_regulators(phy, 0);

	mutex_unlock(&phy->phy_lock);



	return ret;

}



static void msm_snps_hsphy_enter_retention(struct msm_snps_hsphy *phy)

{

	u32 val;



	val = readb_relaxed(USB_PHY_CSR_PHY_CTRL_COMMON0);

	val |= SIDDQ;

	writeb_relaxed(val, USB_PHY_CSR_PHY_CTRL_COMMON0);



	dev_dbg(phy->phy.dev, "PHY is in retention");

}



static void msm_snps_hsphy_exit_retention(struct msm_snps_hsphy *phy)

{

	u32 val;



	val = readb_relaxed(USB_PHY_CSR_PHY_CTRL_COMMON0);

	val &= ~SIDDQ;

	writeb_relaxed(val, USB_PHY_CSR_PHY_CTRL_COMMON0);



	dev_dbg(phy->phy.dev, "PHY is out of retention");

}



static int msm_snps_phy_block_reset(struct msm_snps_hsphy *phy)

{

	int ret;



	msm_snps_hsphy_disable_clocks(phy);



	ret = reset_control_assert(phy->phy_reset);

	if (ret) {

		dev_err(phy->phy.dev, "phy_reset_clk assert failed %d\n",

									ret);

		return ret;

	}



	usleep_range(10, 15);



	ret = reset_control_deassert(phy->phy_reset);

	if (ret) {

		dev_err(phy->phy.dev, "phy_reset_clk deassert failed %d\n",

									ret);

		return ret;

	}



	usleep_range(80, 100);



	msm_snps_hsphy_enable_clocks(phy);



	return 0;

}



static int msm_snps_hsphy_reset(struct msm_snps_hsphy *phy)

{

	int ret;



	ret = reset_control_assert(phy->phy_por_reset);

	if (ret) {

		dev_err(phy->phy.dev, "phy_por_clk assert failed %d\n", ret);

		return ret;

	}

	/*

	 * The Femto PHY is POR reset in the following scenarios.

	 *

	 * 1. After overriding the parameter registers.

	 * 2. Low power mode exit from PHY retention.

	 *

	 * Ensure that SIDDQ is cleared before bringing the PHY

	 * out of reset.

	 *

	 */

	msm_snps_hsphy_exit_retention(phy);



	/*

	 * As per databook, 10 usec delay is required between

	 * PHY POR assert and de-assert.

	 */

	usleep_range(10, 20);

	ret = reset_control_deassert(phy->phy_por_reset);

	if (ret) {

		pr_err("phy_por_clk de-assert failed %d\n", ret);

		return ret;

	}

	/*

	 * As per databook, it takes 75 usec for PHY to stabilize

	 * after the reset.

	 */

	usleep_range(80, 100);



	/* Ensure that RESET operation is completed. */

	mb();



	return 0;

}



static int msm_snps_hsphy_init(struct usb_phy *uphy)

{

	struct msm_snps_hsphy *phy =

				container_of(uphy, struct msm_snps_hsphy, phy);

	int ret;



	dev_dbg(phy->phy.dev, "%s: Initialize HS PHY\n", __func__);

	ret = msm_snps_hsphy_enable_regulators(phy);

	if (ret)

		return ret;



	ret = msm_snps_phy_block_reset(phy);

	if (ret)

		return ret;



	ret = msm_snps_hsphy_reset(phy);



	return ret;

}



static void msm_snps_hsphy_enable_hv_interrupts(struct msm_snps_hsphy *phy)

{

	u32 val;



	dev_dbg(phy->phy.dev, "%s\n", __func__);

	val = readl_relaxed(USB_PHY_CSR_PHY_CTRL3);

	val |= CLAMP_MPM_DPSE_DMSE_EN_N;

	writeb_relaxed(val, USB_PHY_CSR_PHY_CTRL3);

}



static void msm_snps_hsphy_disable_hv_interrupts(struct msm_snps_hsphy *phy)

{

	u32 val;



	dev_dbg(phy->phy.dev, "%s\n", __func__);

	val = readl_relaxed(USB_PHY_CSR_PHY_CTRL3);

	val &= ~CLAMP_MPM_DPSE_DMSE_EN_N;

	writeb_relaxed(val, USB_PHY_CSR_PHY_CTRL3);

}



static int msm_snps_hsphy_set_suspend(struct usb_phy *uphy, int suspend)

{

	struct msm_snps_hsphy *phy = container_of(uphy,

					struct msm_snps_hsphy, phy);



	dev_dbg(phy->phy.dev, "%s: suspend:%d with phy->suspended:%d\n",

					__func__, suspend, phy->suspended);

	if (phy->suspended == suspend) {

		dev_info(phy->phy.dev, "PHY is already suspended\n");

		return 0;

	}



	if (suspend) {

		if (phy->cable_connected) {

			msm_snps_hsphy_enable_hv_interrupts(phy);

			msm_snps_hsphy_disable_clocks(phy);

		} else {

			msm_snps_hsphy_enter_retention(phy);

			msm_snps_hsphy_disable_clocks(phy);

			msm_snps_hsphy_disable_regulators(phy);

		}



		phy->suspended = true;

	} else {

		if (phy->cable_connected) {

			msm_snps_hsphy_enable_clocks(phy);

			msm_snps_hsphy_disable_hv_interrupts(phy);

		} else {

			msm_snps_hsphy_enable_regulators(phy);

			msm_snps_hsphy_enable_clocks(phy);

			msm_snps_hsphy_exit_retention(phy);

		}



		phy->suspended = false;

	}



	return 0;

}



static int msm_snps_dpdm_regulator_enable(struct regulator_dev *rdev)

{

	int ret = 0;

	struct msm_snps_hsphy *phy = rdev_get_drvdata(rdev);



	mutex_lock(&phy->phy_lock);

	if (phy->dpdm_enable) {

		dev_dbg(phy->phy.dev, "%s: DP DM regulator already enabled\n",

								__func__);

		mutex_unlock(&phy->phy_lock);

		return 0;

	}



	msm_snps_hsphy_enable_regulators(phy);

	phy->dpdm_enable = true;

	mutex_unlock(&phy->phy_lock);



	return ret;

}



static int msm_snps_dpdm_regulator_disable(struct regulator_dev *rdev)

{

	int ret = 0;

	struct msm_snps_hsphy *phy = rdev_get_drvdata(rdev);



	mutex_lock(&phy->phy_lock);

	if (!phy->dpdm_enable) {

		dev_dbg(phy->phy.dev, "%s: DP DM regulator already enabled\n",

								__func__);

		mutex_unlock(&phy->phy_lock);

		return 0;

	}



	msm_snps_hsphy_disable_regulators(phy);

	phy->dpdm_enable = false;

	mutex_unlock(&phy->phy_lock);



	return ret;

}



static int msm_snps_dpdm_regulator_is_enabled(struct regulator_dev *rdev)

{

	struct msm_snps_hsphy *phy = rdev_get_drvdata(rdev);



	return phy->dpdm_enable;

}



static struct regulator_ops msm_snps_dpdm_regulator_ops = {

	.enable		= msm_snps_dpdm_regulator_enable,

	.disable	= msm_snps_dpdm_regulator_disable,

	.is_enabled	= msm_snps_dpdm_regulator_is_enabled,

};



static int msm_snps_dpdm_regulator_register(struct msm_snps_hsphy *phy)

{

	struct device *dev = phy->phy.dev;

	struct regulator_config cfg = {};

	struct regulator_init_data *init_data;



	init_data = devm_kzalloc(dev, sizeof(*init_data), GFP_KERNEL);

	if (!init_data)

		return -ENOMEM;



	init_data->constraints.valid_ops_mask |= REGULATOR_CHANGE_STATUS;

	phy->dpdm_rdesc.owner = THIS_MODULE;

	phy->dpdm_rdesc.type = REGULATOR_VOLTAGE;

	phy->dpdm_rdesc.ops = &msm_snps_dpdm_regulator_ops;

	phy->dpdm_rdesc.name = kbasename(dev->of_node->full_name);



	cfg.dev = dev;

	cfg.init_data = init_data;

	cfg.driver_data = phy;

	cfg.of_node = dev->of_node;



	phy->dpdm_rdev = devm_regulator_register(dev, &phy->dpdm_rdesc, &cfg);

	if (IS_ERR(phy->dpdm_rdev))

		return PTR_ERR(phy->dpdm_rdev);



	return 0;

}



static int msm_snps_hsphy_notify_connect(struct usb_phy *uphy,

					enum usb_device_speed speed)

{

	struct msm_snps_hsphy *phy = container_of(uphy,

					struct msm_snps_hsphy, phy);



	phy->cable_connected = true;



	dev_dbg(phy->phy.dev, "PHY: connect notification cable_connected=%d\n",

							phy->cable_connected);

	return 0;

}



static int msm_snps_hsphy_notify_disconnect(struct usb_phy *uphy,

					enum usb_device_speed speed)

{

	struct msm_snps_hsphy *phy = container_of(uphy,

					struct msm_snps_hsphy, phy);



	phy->cable_connected = false;



	dev_dbg(phy->phy.dev, "PHY: connect notification cable_connected=%d\n",

							phy->cable_connected);

	return 0;

}



static int msm_snps_hsphy_probe(struct platform_device *pdev)

{

	struct msm_snps_hsphy	*phy;

	struct device *dev = &pdev->dev;

	struct resource *res;

	int ret = 0;

	int len = 0;



	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);

	if (!phy)

		return -ENOMEM;



	dev_dbg(dev, "%s: probe\n", __func__);

	phy->phy_reset = devm_reset_control_get(dev, "phy_reset");

	if (IS_ERR(phy->phy_reset)) {

		dev_err(dev, "%s failed to get phy_reset %d\n",

						__func__, ret);

		return PTR_ERR(phy->phy_reset);

	}



	phy->phy_por_reset = devm_reset_control_get(dev, "phy_por_reset");

	if (IS_ERR(phy->phy_por_reset)) {

		dev_err(dev, "%s failed to get phy_por_reset %d\n",

						__func__, ret);

		return PTR_ERR(phy->phy_por_reset);

	}



	phy->ref_clk = devm_clk_get(dev, "ref_clk");

	if (IS_ERR(phy->ref_clk)) {

		dev_err(dev, "%s failed to get ref_clk %d\n",

						__func__, ret);

		return PTR_ERR(phy->ref_clk);

	}



	phy->phy_csr_clk = devm_clk_get(dev, "phy_csr_clk");

	if (IS_ERR(phy->phy_csr_clk)) {

		dev_err(dev, "%s failed to get phy_csr_clk %d\n",

						__func__, ret);

		return PTR_ERR(phy->phy_csr_clk);

	}



	res = platform_get_resource_byname(pdev,

					IORESOURCE_MEM, "phy_csr");



	phy->phy_csr_regs = devm_ioremap_resource(dev, res);

	if (IS_ERR(phy->phy_csr_regs)) {

		dev_err(dev, "%s: PHY CSR ioremap failed!\n", __func__);

		return PTR_ERR(phy->phy_csr_regs);

	}



	of_get_property(dev->of_node, "qcom,snps-hs-phy-init-seq", &len);

	if (len) {

		phy->phy_init_seq = devm_kzalloc(dev, len, GFP_KERNEL);

		if (!phy->phy_init_seq)

			return -ENOMEM;

		of_property_read_u32_array(dev->of_node,

				"qcom,snps-hs-phy-init-seq", phy->phy_init_seq,

				(len/sizeof(*phy->phy_init_seq)));

	}



	phy->regulator[MSM_HSPHY_DVDD_REGULATOR].supply = "vdd";

	phy->regulator[MSM_HSPHY_1P8_REGULATOR].supply = "vdda18";

	phy->regulator[MSM_HSPHY_3P3_REGULATOR].supply = "vdda33";



	ret = devm_regulator_bulk_get(dev, USB_HSPHY_MAX_REGULATORS,

							phy->regulator);

	if (ret)

		return ret;



	ret = of_property_read_u32_array(dev->of_node, "qcom,vdd-voltage-level",

		(u32 *) phy->voltage_levels[MSM_HSPHY_DVDD_REGULATOR],

		ARRAY_SIZE(phy->voltage_levels[MSM_HSPHY_DVDD_REGULATOR]));

	if (ret) {

		dev_err(dev, "%s: error reading qcom,vdd-voltage-level property\n",

				__func__);

		return ret;

	}



	phy->voltage_levels[MSM_HSPHY_1P8_REGULATOR][0] = 0;

	phy->voltage_levels[MSM_HSPHY_1P8_REGULATOR][1] = USB_HSPHY_1P8_VOL_MIN;

	phy->voltage_levels[MSM_HSPHY_1P8_REGULATOR][2] = USB_HSPHY_1P8_VOL_MAX;



	phy->voltage_levels[MSM_HSPHY_3P3_REGULATOR][0] = 0;

	phy->voltage_levels[MSM_HSPHY_3P3_REGULATOR][1] = USB_HSPHY_3P3_VOL_MIN;

	phy->voltage_levels[MSM_HSPHY_3P3_REGULATOR][2] = USB_HSPHY_3P3_VOL_MAX;



	platform_set_drvdata(pdev, phy);



	phy->phy.dev			= dev;

	phy->phy.init			= msm_snps_hsphy_init;

	phy->phy.set_suspend		= msm_snps_hsphy_set_suspend;

	phy->phy.notify_connect		= msm_snps_hsphy_notify_connect;

	phy->phy.notify_disconnect	= msm_snps_hsphy_notify_disconnect;



	mutex_init(&phy->phy_lock);

	ret = msm_snps_dpdm_regulator_register(phy);

	if (ret)

		return ret;



	ret = usb_add_phy_dev(&phy->phy);



	return ret;

}



static int msm_snps_hsphy_remove(struct platform_device *pdev)

{

	struct msm_snps_hsphy *phy = platform_get_drvdata(pdev);



	usb_remove_phy(&phy->phy);



	msm_snps_hsphy_disable_clocks(phy);

	msm_snps_hsphy_disable_regulators(phy);



	return 0;

}



static const struct of_device_id msm_usb_hsphy_match[] = {

	{

		.compatible	= "qcom,usb-snps-hsphy",

	},

	{ },

};



static struct platform_driver msm_snps_hsphy_driver = {

	.probe		= msm_snps_hsphy_probe,

	.remove		= msm_snps_hsphy_remove,

	.driver	= {

		.name	= "msm-usb-snps-hsphy",

		.of_match_table = msm_usb_hsphy_match,

	},

};



module_platform_driver(msm_snps_hsphy_driver);



MODULE_DESCRIPTION("MSM USB SNPS HS PHY driver");

MODULE_LICENSE("GPL v2");

include/linux/usb/msm_hsusb_hw.h

+26 −0
Original line number Diff line number Diff line
@@ -64,6 +64,7 @@ 
#define ULPI_STP_CTRL           (1 << 30) /* Block communication with PHY */

#define PHY_RETEN               (1 << 1) /* PHY retention enable/disable */

#define PHY_POR_ASSERT		(1 << 0) /* USB2 28nm PHY POR ASSERT */

#define PHY_CLAMP_DPDMSE_EN	(1 << 21) /* PHY mpm DP DM clamp enable */



/* OTG definitions */

#define OTGSC_INTSTS_MASK	(0x7f << 16)
@@ -74,4 +75,29 @@ 
#define OTGSC_IDIE		(1 << 24)

#define OTGSC_BSVIE		(1 << 27)



/* USB PHY CSR registers and bit definitions */



#define USB_PHY_CSR_PHY_CTRL_COMMON0 (MSM_USB_PHY_CSR_BASE + 0x078)

#define SIDDQ BIT(2)



#define USB_PHY_CSR_PHY_CTRL1 (MSM_USB_PHY_CSR_BASE + 0x08C)

#define ID_HV_CLAMP_EN_N BIT(1)



#define USB_PHY_CSR_PHY_CTRL3 (MSM_USB_PHY_CSR_BASE + 0x094)

#define CLAMP_MPM_DPSE_DMSE_EN_N BIT(2)



#define USB2_PHY_USB_PHY_IRQ_CMD (MSM_USB_PHY_CSR_BASE + 0x0D0)

#define USB2_PHY_USB_PHY_INTERRUPT_SRC_STATUS (MSM_USB_PHY_CSR_BASE + 0x05C)



#define USB2_PHY_USB_PHY_INTERRUPT_CLEAR0 (MSM_USB_PHY_CSR_BASE + 0x0DC)

#define USB2_PHY_USB_PHY_INTERRUPT_CLEAR1 (MSM_USB_PHY_CSR_BASE + 0x0E0)



#define USB2_PHY_USB_PHY_INTERRUPT_MASK1 (MSM_USB_PHY_CSR_BASE + 0x0D8)



#define USB_PHY_IDDIG_1_0 BIT(7)



#define USB_PHY_IDDIG_RISE_MASK BIT(0)

#define USB_PHY_IDDIG_FALL_MASK BIT(1)

#define USB_PHY_ID_MASK (USB_PHY_IDDIG_RISE_MASK | USB_PHY_IDDIG_FALL_MASK)



#endif /* __LINUX_USB_GADGET_MSM72K_UDC_H__ */