Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit b464f791 authored by Mark Rankilor's avatar Mark Rankilor Committed by Greg Kroah-Hartman
Browse files

Staging: comedi: Fixed long line lengths in comedi.h 



This patches fixes long line lengths in comedi.h that were picked up by
checkpatch.pl

Signed-off-by: default avatarMark Rankilor <reodge@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 6c7f8196

drivers/staging/comedi/comedi.h

+18 −14
Original line number Diff line number Diff line
@@ -465,7 +465,8 @@ 


#define COMEDI_CB_EOS		1	/* end of scan */

#define COMEDI_CB_EOA		2	/* end of acquisition */

#define COMEDI_CB_BLOCK		4	/* data has arrived: wakes up read() / write() */

#define COMEDI_CB_BLOCK		4	/* data has arrived:

					 * wakes up read() / write() */

#define COMEDI_CB_EOBUF		8	/* DEPRECATED: end of buffer */

#define COMEDI_CB_ERROR		16	/* card error during acquisition */

#define COMEDI_CB_OVERFLOW	32	/* buffer overflow/underflow */
@@ -499,8 +500,10 @@ 
		I8254_MODE2 = (2 << 1),	/* Rate generator */

		I8254_MODE3 = (3 << 1),	/* Square wave mode */

		I8254_MODE4 = (4 << 1),	/* Software triggered strobe */

		I8254_MODE5 = (5 << 1),	/* Hardware triggered strobe (retriggerable) */

		I8254_BCD = 1,	/* use binary-coded decimal instead of binary (pretty useless) */

		I8254_MODE5 = (5 << 1),	/* Hardware triggered strobe

					 * (retriggerable) */

		I8254_BCD = 1,	/* use binary-coded decimal instead of binary

				 * (pretty useless) */

		I8254_BINARY = 0

	};
@@ -640,7 +643,8 @@ May be bitwise-or'd with CR_EDGE or CR_INVERT. */ 
		NI_GPCT_UP_DOWN_PIN_i_GATE_SELECT = 0x201,

		NI_GPCT_SELECTED_GATE_GATE_SELECT = 0x21e,

		/* m-series "second gate" sources are unknown,

		   we should add them here with an offset of 0x300 when known. */

		 * we should add them here with an offset of 0x300 when

		 * known. */

		NI_GPCT_DISABLED_GATE_SELECT = 0x8000,

	};

	static inline unsigned NI_GPCT_GATE_PIN_GATE_SELECT(unsigned n)
@@ -681,14 +685,14 @@ INSN_CONFIG_SET_OTHER_SRC when using NI general-purpose counters. */ 
INSN_CONFIG_ARM */

	enum ni_gpct_arm_source {

		NI_GPCT_ARM_IMMEDIATE = 0x0,

		NI_GPCT_ARM_PAIRED_IMMEDIATE = 0x1,	/* Start both the counter and

							   the adjacent paired counter

							   simultaneously */

		/* NI doesn't document bits for selecting hardware arm triggers.  If

		 * the NI_GPCT_ARM_UNKNOWN bit is set, we will pass the least

		 * significant bits (3 bits for 660x or 5 bits for m-series) through to

		 * the hardware.  This will at least allow someone to figure out what

		 * the bits do later. */

		NI_GPCT_ARM_PAIRED_IMMEDIATE = 0x1, /* Start both the counter

						     * and the adjacent paired

						     * counter simultaneously */

		/* NI doesn't document bits for selecting hardware arm triggers.

		 * If the NI_GPCT_ARM_UNKNOWN bit is set, we will pass the least

		 * significant bits (3 bits for 660x or 5 bits for m-series)

		 * through to the hardware.  This will at least allow someone to

		 * figure out what the bits do later. */

		NI_GPCT_ARM_UNKNOWN = 0x1000,

	};
@@ -740,8 +744,8 @@ INSN_CONFIG_ARM */ 
		NI_RTSI_OUTPUT_G_GATE0 = 6,

		NI_RTSI_OUTPUT_RGOUT0 = 7,

		NI_RTSI_OUTPUT_RTSI_BRD_0 = 8,

		NI_RTSI_OUTPUT_RTSI_OSC = 12	/* pre-m-series always have RTSI clock

						   on line 7 */

		NI_RTSI_OUTPUT_RTSI_OSC = 12	/* pre-m-series always have RTSI

						 * clock on line 7 */

	};

	static inline unsigned NI_RTSI_OUTPUT_RTSI_BRD(unsigned n)

	{