ARM: dts: msm: add NT36850 dsi panel and ext bridge lt9611 for HDK855

/* Copyright (c) 2018, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */

&mdss_mdp {

	dsi_ext_bridge_hdmi_1080p: qcom,mdss_dsi_ext_bridge_hdmi_1080p {

		qcom,mdss-dsi-panel-name = "ext bridge video mode hdmi 1080p";

		qcom,mdss-dsi-panel-type = "dsi_video_mode";

		qcom,mdss-dsi-virtual-channel-id = <0>;

		qcom,mdss-dsi-stream = <0>;

		qcom,mdss-dsi-bpp = <24>;

		qcom,mdss-dsi-border-color = <0>;

		qcom,mdss-dsi-traffic-mode = "non_burst_sync_pulse";

		qcom,mdss-dsi-bllp-eof-power-mode;

		qcom,mdss-dsi-bllp-power-mode;

		qcom,mdss-dsi-lane-0-state;

		qcom,mdss-dsi-lane-1-state;

		qcom,mdss-dsi-lane-2-state;

		qcom,mdss-dsi-lane-3-state;

		qcom,mdss-dsi-dma-trigger = "trigger_sw";

		qcom,mdss-dsi-mdp-trigger = "none";

		qcom,mdss-dsi-t-clk-post = <0x18>;

		qcom,mdss-dsi-t-clk-pre = <0x1b>;

		qcom,mdss-dsi-force-clock-lane-hs;

		qcom,mdss-dsi-ext-bridge-mode;

		qcom,mdss-dsi-display-timings {

			timing@0{

				qcom,mdss-dsi-panel-width = <1920>;

				qcom,mdss-dsi-panel-height = <1080>;

				qcom,mdss-dsi-h-front-porch = <88>;

				qcom,mdss-dsi-h-back-porch = <148>;

				qcom,mdss-dsi-h-pulse-width = <44>;

				qcom,mdss-dsi-h-sync-skew = <0>;

				qcom,mdss-dsi-v-back-porch = <36>;

				qcom,mdss-dsi-v-front-porch = <4>;

				qcom,mdss-dsi-v-pulse-width = <5>;

				qcom,mdss-dsi-h-sync-pulse = <0>;

				qcom,mdss-dsi-panel-framerate = <60>;

				qcom,display-topology = <1 0 1>;

				qcom,default-topology-index = <0>;

			};

		};

	};

};

	compatible = "qcom,sm8150-hdk", "qcom,sm8150", "qcom,hdk";

	qcom,board-id = <0x1f 0x0>;

};

&dsi_dual_nt36850_truly_cmd {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";

	qcom,mdss-dsi-bl-min-level = <1>;

	qcom,mdss-dsi-bl-max-level = <4095>;

	qcom,mdss-dsi-mode-sel-gpio-state = "dual_port";

	qcom,platform-te-gpio = <&tlmm 8 0>;

	qcom,platform-reset-gpio = <&tlmm 6 0>;

};

&pm8150l_wled {

	qcom,string-cfg= <7>;

	qcom,leds-per-string = <6>;

	status = "ok";

};

&pm8150l_lcdb {

	status = "ok";

};

&dsi_sw43404_amoled_cmd_display {

	/delete-property/ qcom,dsi-display-active;

};

&dsi_dual_nt36850_truly_cmd_display {

	/delete-property/ qcom,dsi-display-active;

};

&qupv3_se9_i2c {

	status = "ok";

	lt9611: lt,lt9611@3b {

		compatible = "lt,lt9611";

		reg = <0x3b>;

		interrupt-parent = <&tlmm>;

		interrupts = <63 0>;

		interrupt-names = "lt_irq";

		lt,irq-gpio = <&tlmm 9 0x0>;

		lt,reset-gpio = <&tlmm 7 0x0>;

		instance_id = <0>;

		lt,non-pluggable;

		lt,preferred-mode = "1920x1080";

		lt,customize-modes {

			lt,customize-mode-id@0 {

				lt,mode-h-active = <1920>;

				lt,mode-h-front-porch = <88>;

				lt,mode-h-pulse-width = <44>;

				lt,mode-h-back-porch = <148>;

				lt,mode-h-active-high;

				lt,mode-v-active = <1080>;

				lt,mode-v-front-porch = <4>;

				lt,mode-v-pulse-width = <5>;

				lt,mode-v-back-porch = <36>;

				lt,mode-v-active-high;

				lt,mode-refresh-rate = <60>;

				lt,mode-clock-in-khz = <148500>;

			};

		};

		ports {

			#address-cells = <1>;

			#size-cells = <0>;

			port@0 {

				reg = <0>;

				lt9611_in: endpoint {

					remote-endpoint = <&ext_dsi_out>;

				};

			};

		};

	};

};

#include "dsi-panel-ext-bridge-hdmi-1080p.dtsi"

&soc {

	ext_dsi_bridge_display: qcom,dsi-display@50 {

		label = "ext_dsi_bridge_display hdmi 1080p";

		qcom,dsi-display-active;

		qcom,display-type = "primary";

		qcom,dsi-ctrl-num = <0>;

		qcom,dsi-phy-num = <0>;

		qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0";

		qcom,dsi-panel = <&dsi_ext_bridge_hdmi_1080p>;

	};

};

&sde_dsi {

	qcom,dsi-display-list = <&ext_dsi_bridge_display

				  &dsi_dual_nt36850_truly_cmd_display>;

	ports {

		#address-cells = <1>;

		#size-cells = <0>;

		port@0 {

			reg = <0>;

			ext_dsi_out: endpoint {

				remote-endpoint = <&lt9611_in>;

			};

		};

	};

};