Merge "ARM: dts: msm: add APC regulator nodes for QCS405" (afb450e1) · Commits · e / devices / android_kernel_oneplus_sm8150

arch/arm64/boot/dts/qcom/qcs405-regulator.dtsi

+95 −5

Original line number	Diff line number	Diff line
		@@ -255,13 +255,103 @@
		};
		};

		/* Stub regulators */
		/ {
		/* VDD_APC supply */
		apc_vreg_corner: regulator-apc-corner {
		compatible = "qcom,stub-regulator";
		&spmi_bus {
		qcom,pms405@1 {
		/* PMS405 S3 = VDD_APC_supply */
		pms405_s3: spm-regulator@1a00 {
		compatible = "qcom,spm-regulator";
		reg = <0x1a00 0x100>;
		regulator-name = "pms405_s3";
		regulator-min-microvolt = <1048000>;
		regulator-max-microvolt = <1352000>;
		};
		};
		};

		&soc {
		/* APC CPR and MEM ACC regulators */
		mem_acc_vreg_corner: regulator@1942120 {
		compatible = "qcom,mem-acc-regulator";
		regulator-name = "mem_acc_corner";
		regulator-min-microvolt = <1>;
		regulator-max-microvolt = <2>;

		qcom,acc-reg-addr-list =
		<0x01942138 0x01942130 0x01942120 0x01942124>;

		qcom,acc-init-reg-config = <1 0xff>, <2 0x5555>;

		qcom,num-acc-corners = <2>;
		qcom,boot-acc-corner = <2>;
		qcom,corner1-reg-config =
		/* INT2 => INT2 */
		<(-1) (-1)>, <(-1) (-1)>,
		/* INT2 => NOM */
		< 3 0x0>, < 4 0x0>;

		qcom,corner2-reg-config =
		/* NOM => INT2 */
		< 3 0x1041041>, < 4 0x41>,
		/* NOM => NOM */
		<(-1) (-1)>, <(-1) (-1)>;
		};

		apc_vreg_corner: regulator@b018000 {
		compatible = "qcom,cpr-regulator";
		reg = <0xb018000 0x1000>, <0xb011064 4>, <0xa4000 0x1000>;
		reg-names = "rbcpr", "rbcpr_clk", "efuse_addr";
		interrupts = <0 15 0>;
		regulator-name = "apc_corner";
		regulator-min-microvolt = <1>;
		regulator-max-microvolt = <3>;

		qcom,cpr-fuse-corners = <3>;
		qcom,cpr-voltage-ceiling = <1224000 1288000 1352000>;
		qcom,cpr-voltage-floor = <1048000 1048000 1088000>;
		vdd-apc-supply = <&pms405_s3>;

		mem-acc-supply = <&mem_acc_vreg_corner>;

		qcom,cpr-ref-clk = <19200>;
		qcom,cpr-timer-delay = <5000>;
		qcom,cpr-timer-cons-up = <0>;
		qcom,cpr-timer-cons-down = <2>;
		qcom,cpr-irq-line = <0>;
		qcom,cpr-step-quotient = <25>;
		qcom,cpr-up-threshold = <1>;
		qcom,cpr-down-threshold = <3>;
		qcom,cpr-idle-clocks = <15>;
		qcom,cpr-gcnt-time = <1>;
		qcom,vdd-apc-step-up-limit = <1>;
		qcom,vdd-apc-step-down-limit = <1>;
		qcom,cpr-apc-volt-step = <8000>;

		qcom,cpr-fuse-row = <69 0>;
		qcom,cpr-fuse-target-quot = <30 42 64>;
		qcom,cpr-fuse-ro-sel = <0 4 8>;
		qcom,cpr-init-voltage-ref = <1224000 1288000 1352000>;
		qcom,cpr-fuse-init-voltage =
		<69 12 6 0>,
		<69 18 6 0>,
		<69 24 6 0>;
		qcom,cpr-fuse-quot-offset =
		<70 12 7 0>,
		<70 19 7 0>,
		<70 26 7 0>;
		qcom,cpr-fuse-quot-offset-scale = <5 5 5>;
		qcom,cpr-init-voltage-step = <10000>;
		qcom,cpr-corner-map = <1 2 3>;
		qcom,mem-acc-corner-map = <1 2 2>;
		qcom,cpr-corner-frequency-map =
		<1 1094400000>,
		<2 1248000000>,
		<3 1401600000>;
		qcom,speed-bin-fuse-sel = <39 34 3 0>;
		qcom,cpr-fuse-revision = <67 3 3 0>;
		qcom,cpr-speed-bin-max-corners =
		<(-1) (-1) 1 2 3>;
		qcom,cpr-quot-adjust-scaling-factor-max = <0 1400 1400>;
		qcom,cpr-voltage-scaling-factor-max = <0 2000 2000>;
		qcom,cpr-scaled-init-voltage-as-ceiling;
		};
		};

arch/arm64/boot/dts/qcom/qcs405-rumi.dtsi

+2 −0

Original line number	Diff line number	Diff line
		@@ -75,6 +75,8 @@

		&soc {
		/delete-node/ qcom,spmi@200f000;
		/delete-node/ regulator@1942120;
		/delete-node/ regulator@b018000;
		};

		&rpm_bus {

arch/arm64/boot/dts/qcom/qcs405-stub-regulator.dtsi

+8 −0

Original line number	Diff line number	Diff line
		@@ -183,4 +183,12 @@
		regulator-min-microvolt = <3000000>;
		regulator-max-microvolt = <3300000>;
		};

		/* VDD_APC supply */
		apc_vreg_corner: regulator-apc-corner {
		compatible = "qcom,stub-regulator";
		regulator-name = "apc_corner";
		regulator-min-microvolt = <1>;
		regulator-max-microvolt = <3>;
		};
		};