Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit a0e9e9be authored by Vishnu Patekar's avatar Vishnu Patekar Committed by Maxime Ripard
Browse files

ARM: dts: sun8i: Add sun8i-a23-a33 dtsi 



Rename sun8i-a23.dtsi to sun8i-a23-a33.dtsi as the base dtsi for the A33
is 99% the same and add a new sun8i-a23.dtsi including sun8i-a23-a33.dtsi
and setting the few things not shared with the A33 (mbus-clk, pio
compatible and interrupts).

Signed-off-by: default avatarVishnu Patekar <vishnupatekar0510@gmail.com>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: default avatarChen-Yu Tsai <wens@csie.org>
parent 0eb14a8d

arch/arm/boot/dts/sun8i-a23-a33.dtsi

0 → 100644
+616 −0
Original line number Diff line number Diff line 
/*

 * Copyright 2014 Chen-Yu Tsai

 *

 * Chen-Yu Tsai <wens@csie.org>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



#include "skeleton.dtsi"



#include <dt-bindings/interrupt-controller/arm-gic.h>



#include <dt-bindings/pinctrl/sun4i-a10.h>



/ {

	interrupt-parent = <&gic>;



	chosen {

		#address-cells = <1>;

		#size-cells = <1>;

		ranges;



		framebuffer@0 {

			compatible = "allwinner,simple-framebuffer",

				     "simple-framebuffer";

			allwinner,pipeline = "de_be0-lcd0";

			clocks = <&pll6 0>;

			status = "disabled";

		};

	};



	timer {

		compatible = "arm,armv7-timer";

		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,

			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,

			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,

			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;

		clock-frequency = <24000000>;

		arm,cpu-registers-not-fw-configured;

	};



	cpus {

		enable-method = "allwinner,sun8i-a23";

		#address-cells = <1>;

		#size-cells = <0>;



		cpu@0 {

			compatible = "arm,cortex-a7";

			device_type = "cpu";

			reg = <0>;

		};



		cpu@1 {

			compatible = "arm,cortex-a7";

			device_type = "cpu";

			reg = <1>;

		};

	};



	clocks {

		#address-cells = <1>;

		#size-cells = <1>;

		ranges;



		osc24M: osc24M_clk {

			#clock-cells = <0>;

			compatible = "fixed-clock";

			clock-frequency = <24000000>;

			clock-output-names = "osc24M";

		};



		osc32k: osc32k_clk {

			#clock-cells = <0>;

			compatible = "fixed-clock";

			clock-frequency = <32768>;

			clock-output-names = "osc32k";

		};



		pll1: clk@01c20000 {

			#clock-cells = <0>;

			compatible = "allwinner,sun8i-a23-pll1-clk";

			reg = <0x01c20000 0x4>;

			clocks = <&osc24M>;

			clock-output-names = "pll1";

		};



		/* dummy clock until actually implemented */

		pll5: pll5_clk {

			#clock-cells = <0>;

			compatible = "fixed-clock";

			clock-frequency = <0>;

			clock-output-names = "pll5";

		};



		pll6: clk@01c20028 {

			#clock-cells = <1>;

			compatible = "allwinner,sun6i-a31-pll6-clk";

			reg = <0x01c20028 0x4>;

			clocks = <&osc24M>;

			clock-output-names = "pll6", "pll6x2";

		};



		cpu: cpu_clk@01c20050 {

			#clock-cells = <0>;

			compatible = "allwinner,sun4i-a10-cpu-clk";

			reg = <0x01c20050 0x4>;



			/*

			 * PLL1 is listed twice here.

			 * While it looks suspicious, it's actually documented

			 * that way both in the datasheet and in the code from

			 * Allwinner.

			 */

			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;

			clock-output-names = "cpu";

		};



		axi: axi_clk@01c20050 {

			#clock-cells = <0>;

			compatible = "allwinner,sun8i-a23-axi-clk";

			reg = <0x01c20050 0x4>;

			clocks = <&cpu>;

			clock-output-names = "axi";

		};



		ahb1: ahb1_clk@01c20054 {

			#clock-cells = <0>;

			compatible = "allwinner,sun6i-a31-ahb1-clk";

			reg = <0x01c20054 0x4>;

			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;

			clock-output-names = "ahb1";

		};



		apb1: apb1_clk@01c20054 {

			#clock-cells = <0>;

			compatible = "allwinner,sun4i-a10-apb0-clk";

			reg = <0x01c20054 0x4>;

			clocks = <&ahb1>;

			clock-output-names = "apb1";

		};



		ahb1_gates: clk@01c20060 {

			#clock-cells = <1>;

			compatible = "allwinner,sun8i-a23-ahb1-gates-clk";

			reg = <0x01c20060 0x8>;

			clocks = <&ahb1>;

			clock-output-names = "ahb1_mipidsi", "ahb1_dma",

					"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",

					"ahb1_nand", "ahb1_sdram",

					"ahb1_hstimer", "ahb1_spi0",

					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",

					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",

					"ahb1_csi", "ahb1_be",	"ahb1_fe",

					"ahb1_gpu", "ahb1_spinlock",

					"ahb1_drc";

		};



		apb1_gates: clk@01c20068 {

			#clock-cells = <1>;

			compatible = "allwinner,sun8i-a23-apb1-gates-clk";

			reg = <0x01c20068 0x4>;

			clocks = <&apb1>;

			clock-output-names = "apb1_codec", "apb1_pio",

					"apb1_daudio0",	"apb1_daudio1";

		};



		apb2: clk@01c20058 {

			#clock-cells = <0>;

			compatible = "allwinner,sun4i-a10-apb1-clk";

			reg = <0x01c20058 0x4>;

			clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;

			clock-output-names = "apb2";

		};



		apb2_gates: clk@01c2006c {

			#clock-cells = <1>;

			compatible = "allwinner,sun8i-a23-apb2-gates-clk";

			reg = <0x01c2006c 0x4>;

			clocks = <&apb2>;

			clock-output-names = "apb2_i2c0", "apb2_i2c1",

					"apb2_i2c2", "apb2_uart0",

					"apb2_uart1", "apb2_uart2",

					"apb2_uart3", "apb2_uart4";

		};



		mmc0_clk: clk@01c20088 {

			#clock-cells = <1>;

			compatible = "allwinner,sun4i-a10-mmc-clk";

			reg = <0x01c20088 0x4>;

			clocks = <&osc24M>, <&pll6 0>;

			clock-output-names = "mmc0",

					     "mmc0_output",

					     "mmc0_sample";

		};



		mmc1_clk: clk@01c2008c {

			#clock-cells = <1>;

			compatible = "allwinner,sun4i-a10-mmc-clk";

			reg = <0x01c2008c 0x4>;

			clocks = <&osc24M>, <&pll6 0>;

			clock-output-names = "mmc1",

					     "mmc1_output",

					     "mmc1_sample";

		};



		mmc2_clk: clk@01c20090 {

			#clock-cells = <1>;

			compatible = "allwinner,sun4i-a10-mmc-clk";

			reg = <0x01c20090 0x4>;

			clocks = <&osc24M>, <&pll6 0>;

			clock-output-names = "mmc2",

					     "mmc2_output",

					     "mmc2_sample";

		};

	};



	soc@01c00000 {

		compatible = "simple-bus";

		#address-cells = <1>;

		#size-cells = <1>;

		ranges;



		dma: dma-controller@01c02000 {

			compatible = "allwinner,sun8i-a23-dma";

			reg = <0x01c02000 0x1000>;

			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&ahb1_gates 6>;

			resets = <&ahb1_rst 6>;

			#dma-cells = <1>;

		};



		mmc0: mmc@01c0f000 {

			compatible = "allwinner,sun5i-a13-mmc";

			reg = <0x01c0f000 0x1000>;

			clocks = <&ahb1_gates 8>,

				 <&mmc0_clk 0>,

				 <&mmc0_clk 1>,

				 <&mmc0_clk 2>;

			clock-names = "ahb",

				      "mmc",

				      "output",

				      "sample";

			resets = <&ahb1_rst 8>;

			reset-names = "ahb";

			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;

			status = "disabled";

			#address-cells = <1>;

			#size-cells = <0>;

		};



		mmc1: mmc@01c10000 {

			compatible = "allwinner,sun5i-a13-mmc";

			reg = <0x01c10000 0x1000>;

			clocks = <&ahb1_gates 9>,

				 <&mmc1_clk 0>,

				 <&mmc1_clk 1>,

				 <&mmc1_clk 2>;

			clock-names = "ahb",

				      "mmc",

				      "output",

				      "sample";

			resets = <&ahb1_rst 9>;

			reset-names = "ahb";

			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;

			status = "disabled";

			#address-cells = <1>;

			#size-cells = <0>;

		};



		mmc2: mmc@01c11000 {

			compatible = "allwinner,sun5i-a13-mmc";

			reg = <0x01c11000 0x1000>;

			clocks = <&ahb1_gates 10>,

				 <&mmc2_clk 0>,

				 <&mmc2_clk 1>,

				 <&mmc2_clk 2>;

			clock-names = "ahb",

				      "mmc",

				      "output",

				      "sample";

			resets = <&ahb1_rst 10>;

			reset-names = "ahb";

			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;

			status = "disabled";

			#address-cells = <1>;

			#size-cells = <0>;

		};



		pio: pinctrl@01c20800 {

			/* compatible gets set in SoC specific dtsi file */

			reg = <0x01c20800 0x400>;

			/* interrupts get set in SoC specific dtsi file */

			clocks = <&apb1_gates 5>;

			gpio-controller;

			interrupt-controller;

			#address-cells = <1>;

			#size-cells = <0>;

			#gpio-cells = <3>;



			uart0_pins_a: uart0@0 {

				allwinner,pins = "PF2", "PF4";

				allwinner,function = "uart0";

				allwinner,drive = <SUN4I_PINCTRL_10_MA>;

				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

			};



			mmc0_pins_a: mmc0@0 {

				allwinner,pins = "PF0", "PF1", "PF2",

						 "PF3", "PF4", "PF5";

				allwinner,function = "mmc0";

				allwinner,drive = <SUN4I_PINCTRL_30_MA>;

				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

			};



			mmc1_pins_a: mmc1@0 {

				allwinner,pins = "PG0", "PG1", "PG2",

						 "PG3", "PG4", "PG5";

				allwinner,function = "mmc1";

				allwinner,drive = <SUN4I_PINCTRL_30_MA>;

				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

			};



			i2c0_pins_a: i2c0@0 {

				allwinner,pins = "PH2", "PH3";

				allwinner,function = "i2c0";

				allwinner,drive = <SUN4I_PINCTRL_10_MA>;

				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

			};



			i2c1_pins_a: i2c1@0 {

				allwinner,pins = "PH4", "PH5";

				allwinner,function = "i2c1";

				allwinner,drive = <SUN4I_PINCTRL_10_MA>;

				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

			};



			i2c2_pins_a: i2c2@0 {

				allwinner,pins = "PE12", "PE13";

				allwinner,function = "i2c2";

				allwinner,drive = <SUN4I_PINCTRL_10_MA>;

				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

			};

		};



		ahb1_rst: reset@01c202c0 {

			#reset-cells = <1>;

			compatible = "allwinner,sun6i-a31-clock-reset";

			reg = <0x01c202c0 0xc>;

		};



		apb1_rst: reset@01c202d0 {

			#reset-cells = <1>;

			compatible = "allwinner,sun6i-a31-clock-reset";

			reg = <0x01c202d0 0x4>;

		};



		apb2_rst: reset@01c202d8 {

			#reset-cells = <1>;

			compatible = "allwinner,sun6i-a31-clock-reset";

			reg = <0x01c202d8 0x4>;

		};



		timer@01c20c00 {

			compatible = "allwinner,sun4i-a10-timer";

			reg = <0x01c20c00 0xa0>;

			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,

				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&osc24M>;

		};



		wdt0: watchdog@01c20ca0 {

			compatible = "allwinner,sun6i-a31-wdt";

			reg = <0x01c20ca0 0x20>;

			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;

		};



		lradc: lradc@01c22800 {

			compatible = "allwinner,sun4i-a10-lradc-keys";

			reg = <0x01c22800 0x100>;

			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;

			status = "disabled";

		};



		uart0: serial@01c28000 {

			compatible = "snps,dw-apb-uart";

			reg = <0x01c28000 0x400>;

			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;

			reg-shift = <2>;

			reg-io-width = <4>;

			clocks = <&apb2_gates 16>;

			resets = <&apb2_rst 16>;

			dmas = <&dma 6>, <&dma 6>;

			dma-names = "rx", "tx";

			status = "disabled";

		};



		uart1: serial@01c28400 {

			compatible = "snps,dw-apb-uart";

			reg = <0x01c28400 0x400>;

			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;

			reg-shift = <2>;

			reg-io-width = <4>;

			clocks = <&apb2_gates 17>;

			resets = <&apb2_rst 17>;

			dmas = <&dma 7>, <&dma 7>;

			dma-names = "rx", "tx";

			status = "disabled";

		};



		uart2: serial@01c28800 {

			compatible = "snps,dw-apb-uart";

			reg = <0x01c28800 0x400>;

			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;

			reg-shift = <2>;

			reg-io-width = <4>;

			clocks = <&apb2_gates 18>;

			resets = <&apb2_rst 18>;

			dmas = <&dma 8>, <&dma 8>;

			dma-names = "rx", "tx";

			status = "disabled";

		};



		uart3: serial@01c28c00 {

			compatible = "snps,dw-apb-uart";

			reg = <0x01c28c00 0x400>;

			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;

			reg-shift = <2>;

			reg-io-width = <4>;

			clocks = <&apb2_gates 19>;

			resets = <&apb2_rst 19>;

			dmas = <&dma 9>, <&dma 9>;

			dma-names = "rx", "tx";

			status = "disabled";

		};



		uart4: serial@01c29000 {

			compatible = "snps,dw-apb-uart";

			reg = <0x01c29000 0x400>;

			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;

			reg-shift = <2>;

			reg-io-width = <4>;

			clocks = <&apb2_gates 20>;

			resets = <&apb2_rst 20>;

			dmas = <&dma 10>, <&dma 10>;

			dma-names = "rx", "tx";

			status = "disabled";

		};



		i2c0: i2c@01c2ac00 {

			compatible = "allwinner,sun6i-a31-i2c";

			reg = <0x01c2ac00 0x400>;

			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&apb2_gates 0>;

			resets = <&apb2_rst 0>;

			status = "disabled";

			#address-cells = <1>;

			#size-cells = <0>;

		};



		i2c1: i2c@01c2b000 {

			compatible = "allwinner,sun6i-a31-i2c";

			reg = <0x01c2b000 0x400>;

			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&apb2_gates 1>;

			resets = <&apb2_rst 1>;

			status = "disabled";

			#address-cells = <1>;

			#size-cells = <0>;

		};



		i2c2: i2c@01c2b400 {

			compatible = "allwinner,sun6i-a31-i2c";

			reg = <0x01c2b400 0x400>;

			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&apb2_gates 2>;

			resets = <&apb2_rst 2>;

			status = "disabled";

			#address-cells = <1>;

			#size-cells = <0>;

		};



		gic: interrupt-controller@01c81000 {

			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";

			reg = <0x01c81000 0x1000>,

			      <0x01c82000 0x1000>,

			      <0x01c84000 0x2000>,

			      <0x01c86000 0x2000>;

			interrupt-controller;

			#interrupt-cells = <3>;

			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;

		};



		rtc: rtc@01f00000 {

			compatible = "allwinner,sun6i-a31-rtc";

			reg = <0x01f00000 0x54>;

			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,

				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;

		};



		prcm@01f01400 {

			compatible = "allwinner,sun8i-a23-prcm";

			reg = <0x01f01400 0x200>;



			ar100: ar100_clk {

				compatible = "fixed-factor-clock";

				#clock-cells = <0>;

				clock-div = <1>;

				clock-mult = <1>;

				clocks = <&osc24M>;

				clock-output-names = "ar100";

			};



			ahb0: ahb0_clk {

				compatible = "fixed-factor-clock";

				#clock-cells = <0>;

				clock-div = <1>;

				clock-mult = <1>;

				clocks = <&ar100>;

				clock-output-names = "ahb0";

			};



			apb0: apb0_clk {

				compatible = "allwinner,sun8i-a23-apb0-clk";

				#clock-cells = <0>;

				clocks = <&ahb0>;

				clock-output-names = "apb0";

			};



			apb0_gates: apb0_gates_clk {

				compatible = "allwinner,sun8i-a23-apb0-gates-clk";

				#clock-cells = <1>;

				clocks = <&apb0>;

				clock-output-names = "apb0_pio", "apb0_timer",

						"apb0_rsb", "apb0_uart",

						"apb0_i2c";

			};



			apb0_rst: apb0_rst {

				compatible = "allwinner,sun6i-a31-clock-reset";

				#reset-cells = <1>;

			};

		};



		cpucfg@01f01c00 {

			compatible = "allwinner,sun8i-a23-cpuconfig";

			reg = <0x01f01c00 0x300>;

		};



		r_uart: serial@01f02800 {

			compatible = "snps,dw-apb-uart";

			reg = <0x01f02800 0x400>;

			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;

			reg-shift = <2>;

			reg-io-width = <4>;

			clocks = <&apb0_gates 4>;

			resets = <&apb0_rst 4>;

			status = "disabled";

		};



		r_pio: pinctrl@01f02c00 {

			compatible = "allwinner,sun8i-a23-r-pinctrl";

			reg = <0x01f02c00 0x400>;

			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&apb0_gates 0>;

			resets = <&apb0_rst 0>;

			gpio-controller;

			interrupt-controller;

			#address-cells = <1>;

			#size-cells = <0>;

			#gpio-cells = <3>;



			r_uart_pins_a: r_uart@0 {

				allwinner,pins = "PL2", "PL3";

				allwinner,function = "s_uart";

				allwinner,drive = <SUN4I_PINCTRL_10_MA>;

				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

			};

		};

	};

};

arch/arm/boot/dts/sun8i-a23.dtsi

+7 −569

File changed.

Preview size limit exceeded, changes collapsed.