Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 980d7929 authored by anish kumar's avatar anish kumar Committed by Greg Kroah-Hartman
Browse files

Extcon: adc_jack: adc-jack driver to support 3.5 pi or simliar devices 



External connector devices that decides connection information based on
ADC values may use adc-jack device driver. The user simply needs to
provide a table of adc range and connection states. Then, extcon
framework will automatically notify others.

Changes in V1:
added Lars-Peter Clausen suggested changes:
Using macros to get rid of boiler plate code such as devm_kzalloc
and module_platform_driver.Other changes suggested are related to
coding guidelines.

Changes in V2:
Removed some unnecessary checks and changed the way we are un-regitering
extcon and freeing the irq while removing.

Changes in V3:
Renamed the files to comply with extcon naming.

Changes in V4:
Added the cancel_work_sync during removing of driver.

Changes in V5:
Added the dependency of IIO in Kconfig.

Changes in V6:
Some nitpicks related to naming.

Reviewed-by: default avatarLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: default avataranish kumar <anish.singh@samsung.com>
Signed-off-by: default avatarMyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 34efe4dc

drivers/extcon/Kconfig

+6 −0
Original line number Original line Diff line number Diff line
@@ -21,6 +21,12 @@ config EXTCON_GPIO 
	  Say Y here to enable GPIO based extcon support. Note that GPIO

	  Say Y here to enable GPIO based extcon support. Note that GPIO

	  extcon supports single state per extcon instance.

	  extcon supports single state per extcon instance.





config EXTCON_ADC_JACK

	tristate "ADC Jack extcon support"

	depends on IIO

	help

	  Say Y here to enable extcon device driver based on ADC values.



config EXTCON_MAX77693

config EXTCON_MAX77693

	tristate "MAX77693 EXTCON Support"

	tristate "MAX77693 EXTCON Support"

	depends on MFD_MAX77693

	depends on MFD_MAX77693

drivers/extcon/Makefile

+1 −0
Original line number Original line Diff line number Diff line
@@ -4,6 +4,7 @@ 




obj-$(CONFIG_EXTCON)		+= extcon_class.o

obj-$(CONFIG_EXTCON)		+= extcon_class.o

obj-$(CONFIG_EXTCON_GPIO)	+= extcon_gpio.o

obj-$(CONFIG_EXTCON_GPIO)	+= extcon_gpio.o

obj-$(CONFIG_EXTCON_ADC_JACK)	+= extcon-adc-jack.o

obj-$(CONFIG_EXTCON_MAX77693)	+= extcon-max77693.o

obj-$(CONFIG_EXTCON_MAX77693)	+= extcon-max77693.o

obj-$(CONFIG_EXTCON_MAX8997)	+= extcon-max8997.o

obj-$(CONFIG_EXTCON_MAX8997)	+= extcon-max8997.o

obj-$(CONFIG_EXTCON_ARIZONA)	+= extcon-arizona.o
 
obj-$(CONFIG_EXTCON_ARIZONA)	+= extcon-arizona.o

drivers/extcon/extcon-adc-jack.c

0 → 100644
+195 −0
Original line number Original line Diff line number Diff line 
/*

 * drivers/extcon/extcon-adc-jack.c

 *

 * Analog Jack extcon driver with ADC-based detection capability.

 *

 * Copyright (C) 2012 Samsung Electronics

 * MyungJoo Ham <myungjoo.ham@samsung.com>

 *

 * Modified for calling to IIO to get adc by <anish.singh@samsung.com>

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 *

 */



#include <linux/slab.h>

#include <linux/device.h>

#include <linux/platform_device.h>

#include <linux/err.h>

#include <linux/interrupt.h>

#include <linux/workqueue.h>

#include <linux/iio/consumer.h>

#include <linux/extcon/extcon-adc-jack.h>

#include <linux/extcon.h>



/**

 * struct adc_jack_data - internal data for adc_jack device driver

 * @edev        - extcon device.

 * @cable_names - list of supported cables.

 * @num_cables  - size of cable_names.

 * @adc_conditions       - list of adc value conditions.

 * @num_conditions       - size of adc_conditions.

 * @irq         - irq number of attach/detach event (0 if not exist).

 * @handling_delay      - interrupt handler will schedule extcon event

 *                      handling at handling_delay jiffies.

 * @handler     - extcon event handler called by interrupt handler.

 * @chan	- iio channel being queried.

 */

struct adc_jack_data {

	struct extcon_dev edev;



	const char **cable_names;

	int num_cables;

	struct adc_jack_cond *adc_conditions;

	int num_conditions;



	int irq;

	unsigned long handling_delay; /* in jiffies */

	struct delayed_work handler;



	struct iio_channel *chan;

};



static void adc_jack_handler(struct work_struct *work)

{

	struct adc_jack_data *data = container_of(to_delayed_work(work),

						  struct adc_jack_data,

						  handler);

	u32 state = 0;

	int ret, adc_val;

	int i;



	ret = iio_read_channel_raw(data->chan, &adc_val);

	if (ret < 0) {

		dev_err(data->edev.dev, "read channel() error: %d\n", ret);

		return;

	}



	/* Get state from adc value with adc_conditions */

	for (i = 0; i < data->num_conditions; i++) {

		struct adc_jack_cond *def = &data->adc_conditions[i];

		if (!def->state)

			break;

		if (def->min_adc <= adc_val && def->max_adc >= adc_val) {

			state = def->state;

			break;

		}

	}

	/* if no def has met, it means state = 0 (no cables attached) */



	extcon_set_state(&data->edev, state);

}



static irqreturn_t adc_jack_irq_thread(int irq, void *_data)

{

	struct adc_jack_data *data = _data;



	schedule_delayed_work(&data->handler, data->handling_delay);

	return IRQ_HANDLED;

}



static int __devinit adc_jack_probe(struct platform_device *pdev)

{

	struct adc_jack_data *data;

	struct adc_jack_pdata *pdata = pdev->dev.platform_data;

	int i, err = 0;



	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);

	if (!data)

		return -ENOMEM;



	data->edev.name = pdata->name;



	if (pdata->cable_names)

		data->edev.supported_cable = pdata->cable_names;

	else

		data->edev.supported_cable = extcon_cable_name;



	/* Check the length of array and set num_cables */

	for (i = 0; data->edev.supported_cable[i]; i++)

		;

	if (i == 0 || i > SUPPORTED_CABLE_MAX) {

		err = -EINVAL;

		dev_err(&pdev->dev, "error: pdata->cable_names size = %d\n",

			i - 1);

		goto out;

	}

	data->num_cables = i;



	if (!pdata->adc_conditions ||

	    !pdata->adc_conditions[0].state) {

		err = -EINVAL;

		dev_err(&pdev->dev, "error: adc_conditions not defined.\n");

		goto out;

	}

	data->adc_conditions = pdata->adc_conditions;



	/* Check the length of array and set num_conditions */

	for (i = 0; data->adc_conditions[i].state; i++)

		;

	data->num_conditions = i;



	data->chan = iio_channel_get(dev_name(&pdev->dev),

						pdata->consumer_channel);

	if (IS_ERR(data->chan)) {

		err = PTR_ERR(data->chan);

		goto out;

	}



	data->handling_delay = msecs_to_jiffies(pdata->handling_delay_ms);



	INIT_DELAYED_WORK_DEFERRABLE(&data->handler, adc_jack_handler);



	platform_set_drvdata(pdev, data);



	err = extcon_dev_register(&data->edev, &pdev->dev);

	if (err)

		goto out;



	data->irq = platform_get_irq(pdev, 0);

	if (!data->irq) {

		dev_err(&pdev->dev, "platform_get_irq failed\n");

		err = -ENODEV;

		goto err_irq;

	}



	err = request_any_context_irq(data->irq, adc_jack_irq_thread,

				pdata->irq_flags, pdata->name, data);



	if (err) {

		dev_err(&pdev->dev, "error: irq %d\n", data->irq);

		err = -EINVAL;

		goto err_irq;

	}



	goto out;



err_irq:

	extcon_dev_unregister(&data->edev);

out:

	return err;

}



static int __devexit adc_jack_remove(struct platform_device *pdev)

{

	struct adc_jack_data *data = platform_get_drvdata(pdev);



	free_irq(data->irq, data);

	cancel_work_sync(&data->handler.work);

	extcon_dev_unregister(&data->edev);



	return 0;

}



static struct platform_driver adc_jack_driver = {

	.probe		= adc_jack_probe,

	.remove		= __devexit_p(adc_jack_remove),

	.driver		= {

		.name	= "adc-jack",

		.owner	= THIS_MODULE,

	},

};



module_platform_driver(adc_jack_driver);

include/linux/extcon/extcon-adc-jack.h

0 → 100644
+73 −0
Original line number Original line Diff line number Diff line 
/*

 * include/linux/extcon/extcon-adc-jack.h

 *

 * Analog Jack extcon driver with ADC-based detection capability.

 *

 * Copyright (C) 2012 Samsung Electronics

 * MyungJoo Ham <myungjoo.ham@samsung.com>

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 *

 */



#ifndef _EXTCON_ADC_JACK_H_

#define _EXTCON_ADC_JACK_H_ __FILE__



#include <linux/module.h>

#include <linux/extcon.h>



/**

 * struct adc_jack_cond - condition to use an extcon state

 * @state	- the corresponding extcon state (if 0, this struct denotes

 *		the last adc_jack_cond element among the array)

 * @min_adc	- min adc value for this condition

 * @max_adc	- max adc value for this condition

 *

 * For example, if { .state = 0x3, .min_adc = 100, .max_adc = 200}, it means

 * that if ADC value is between (inclusive) 100 and 200, than the cable 0 and

 * 1 are attached (1<<0 | 1<<1 == 0x3)

 *

 * Note that you don't need to describe condition for "no cable attached"

 * because when no adc_jack_cond is met, state = 0 is automatically chosen.

 */

struct adc_jack_cond {

	u32 state; /* extcon state value. 0 if invalid */

	u32 min_adc;

	u32 max_adc;

};



/**

 * struct adc_jack_pdata - platform data for adc jack device.

 * @name	- name of the extcon device. If null, "adc-jack" is used.

 * @consumer_channel - Unique name to identify the channel on the consumer

 *                   side. This typically describes the channels used within

 *                   the consumer. E.g. 'battery_voltage'

 * @cable_names	- array of cable names ending with null. If the array itself

 *		if null, extcon standard cable names are chosen.

 * @adc_contitions	- array of struct adc_jack_cond conditions ending

 *			with .state = 0 entry. This describes how to decode

 *			adc values into extcon state.

 * @irq_flags	- irq flags used for the @irq

 * @handling_delay_ms	- in some devices, we need to read ADC value some

 *			milli-seconds after the interrupt occurs. You may

 *			describe such delays with @handling_delay_ms, which

 *			is rounded-off by jiffies.

 */

struct adc_jack_pdata {

	const char *name;

	const char *consumer_channel;

	/*

	 * NULL if standard extcon names are used.

	 * The last entry should be NULL

	 */

	const char **cable_names;

	/* The last entry's state should be 0 */

	struct adc_jack_cond *adc_conditions;



	unsigned long irq_flags;

	unsigned long handling_delay_ms; /* in ms */

};



#endif /* _EXTCON_ADC_JACK_H */