Merge "ARM: dts: msm: Add ADC thermistor support for trinket." (8d0027be) · Commits · e / devices / android_kernel_oneplus_sm8150

arch/arm64/boot/dts/qcom/pmi632.dtsi

+2 −0

Original line number	Diff line number	Diff line
		@@ -123,6 +123,8 @@
		bat_id {
		reg = <ADC_BAT_ID_PU2>;
		label = "bat_id";
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
		};

arch/arm64/boot/dts/qcom/trinket-thermal.dtsi

0 → 100644

+114 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright (c) 2018, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		#include <dt-bindings/thermal/thermal.h>

		&thermal_zones {
		rf-pa0-therm-adc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pm6125_adc_tm ADC_AMUX_THM1_PU2>;
		trips {
		active-config0 {
		temperature = <125000>;
		hysteresis = <1000>;
		type = "passive";
		};
		};
		};

		quiet-therm-adc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pm6125_adc_tm ADC_AMUX_THM2_PU2>;
		trips {
		active-config0 {
		temperature = <125000>;
		hysteresis = <1000>;
		type = "passive";
		};
		};
		};

		xo-therm-adc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pm6125_adc_tm ADC_XO_THERM_PU2>;
		trips {
		active-config0 {
		temperature = <125000>;
		hysteresis = <1000>;
		type = "passive";
		};
		};
		};

		rf-pa1-therm-adc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pm6125_adc_tm ADC_GPIO4_PU2>;
		trips {
		active-config0 {
		temperature = <125000>;
		hysteresis = <1000>;
		type = "passive";
		};
		};
		};

		conn-therm-adc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pmi632_adc_tm ADC_GPIO1_PU2>;
		trips {
		active-config0 {
		temperature = <125000>;
		hysteresis = <1000>;
		type = "passive";
		};
		};
		};

		skin-therm-adc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pmi632_adc_tm ADC_GPIO2_PU2>;
		trips {
		active-config0 {
		temperature = <125000>;
		hysteresis = <1000>;
		type = "passive";
		};
		};
		};

		emmc-ufs-therm-adc {
		polling-delay-passive = <0>;
		polling-delay = <5000>;
		thermal-governor = "user_space";
		thermal-sensors = <&pm6125_adc_tm_iio ADC_GPIO1_PU2>;
		};

		camera-ftherm-adc {
		polling-delay-passive = <0>;
		polling-delay = <5000>;
		thermal-governor = "user_space";
		thermal-sensors = <&pm6125_adc_tm_iio ADC_GPIO3_PU2>;
		};
		};

arch/arm64/boot/dts/qcom/trinket.dtsi

+25 −0

Original line number	Diff line number	Diff line
		@@ -1618,6 +1618,30 @@

		};

		&spmi_bus {
		qcom,pm6125@0 {
		pm6125_adc_tm_iio: adc_tm@3400 {
		compatible = "qcom,adc-tm5-iio";
		reg = <0x3400 0x100>;
		#thermal-sensor-cells = <1>;
		io-channels = <&pm6125_vadc ADC_GPIO1_PU2>,
		<&pm6125_vadc ADC_GPIO3_PU2>;

		emmc_ufs_therm {
		reg = <ADC_GPIO1_PU2>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		};

		camera_flash_therm {
		reg = <ADC_GPIO3_PU2>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		};
		};
		};
		};

		&pm6125_adc_tm {
		io-channels = <&pm6125_vadc ADC_AMUX_THM1_PU2>,
		<&pm6125_vadc ADC_AMUX_THM2_PU2>,
		@@ -1745,3 +1769,4 @@
		&usb0 {
		extcon = <&pmi632_charger>;
		};
		#include "trinket-thermal.dtsi"