Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 895bd4b3 authored by Lokesh Vutla's avatar Lokesh Vutla Committed by Tony Lindgren
Browse files

ARM: dts: Add support for dra76-evm 



dra76-evm is a board based on TI's dra76 processor targeting
for infotainment systems. Adding support for this platform.

dra76-evm and dra7-evm has a similar layout except with few differences.
So create a dra7-evm-common.dtsi with similarities on dra76-evm and
dra7-evm. Include this common dtsi in both dra7-evm.dts and dra76-evm.dts

Signed-off-by: default avatarKeerthy <j-keerthy@ti.com>
Signed-off-by: default avatarVignesh R <vigneshr@ti.com>
Signed-off-by: default avatarLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 148127d3

Documentation/devicetree/bindings/arm/omap/omap.txt

+3 −0
Original line number Diff line number Diff line
@@ -187,6 +187,9 @@ Boards: 
- AM5718 IDK

  compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7"



- DRA762 EVM:  Software Development Board for DRA762

  compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7"



- DRA742 EVM:  Software Development Board for DRA742

  compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"

arch/arm/boot/dts/Makefile

+2 −1
Original line number Diff line number Diff line
@@ -658,7 +658,8 @@ dtb-$(CONFIG_SOC_DRA7XX) += \ 
	dra7-evm.dtb \

	dra72-evm.dtb \

	dra72-evm-revc.dtb \

	dra71-evm.dtb

	dra71-evm.dtb \

	dra76-evm.dtb

dtb-$(CONFIG_ARCH_ORION5X) += \

	orion5x-kuroboxpro.dtb \

	orion5x-lacie-d2-network.dtb \

arch/arm/boot/dts/dra7-evm-common.dtsi

0 → 100644
+258 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */



#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/clk/ti-dra7-atl.h>

#include <dt-bindings/input/input.h>



/ {

	chosen {

		stdout-path = &uart1;

	};



	extcon_usb1: extcon_usb1 {

		compatible = "linux,extcon-usb-gpio";

		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;

	};



	sound0: sound0 {

		compatible = "simple-audio-card";

		simple-audio-card,name = "DRA7xx-EVM";

		simple-audio-card,widgets =

			"Headphone", "Headphone Jack",

			"Line", "Line Out",

			"Microphone", "Mic Jack",

			"Line", "Line In";

		simple-audio-card,routing =

			"Headphone Jack",	"HPLOUT",

			"Headphone Jack",	"HPROUT",

			"Line Out",		"LLOUT",

			"Line Out",		"RLOUT",

			"MIC3L",		"Mic Jack",

			"MIC3R",		"Mic Jack",

			"Mic Jack",		"Mic Bias",

			"LINE1L",		"Line In",

			"LINE1R",		"Line In";

		simple-audio-card,format = "dsp_b";

		simple-audio-card,bitclock-master = <&sound0_master>;

		simple-audio-card,frame-master = <&sound0_master>;

		simple-audio-card,bitclock-inversion;



		sound0_master: simple-audio-card,cpu {

			sound-dai = <&mcasp3>;

			system-clock-frequency = <5644800>;

		};



		simple-audio-card,codec {

			sound-dai = <&tlv320aic3106>;

			clocks = <&atl_clkin2_ck>;

		};

	};



	leds {

		compatible = "gpio-leds";

		led0 {

			label = "dra7:usr1";

			gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;

			default-state = "off";

		};



		led1 {

			label = "dra7:usr2";

			gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;

			default-state = "off";

		};



		led2 {

			label = "dra7:usr3";

			gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;

			default-state = "off";

		};



		led3 {

			label = "dra7:usr4";

			gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;

			default-state = "off";

		};

	};



	gpio_keys {

		compatible = "gpio-keys";

		#address-cells = <1>;

		#size-cells = <0>;

		autorepeat;



		USER1 {

			label = "btnUser1";

			linux,code = <BTN_0>;

			gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;

		};



		USER2 {

			label = "btnUser2";

			linux,code = <BTN_1>;

			gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;

		};

	};

};



&i2c3 {

	status = "okay";

	clock-frequency = <400000>;

};



&mcspi1 {

	status = "okay";

};



&mcspi2 {

	status = "okay";

};



&uart1 {

	status = "okay";

	interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,

			      <&dra7_pmx_core 0x3e0>;

};



&uart2 {

	status = "okay";

};



&uart3 {

	status = "okay";

};



&qspi {

	status = "okay";



	spi-max-frequency = <76800000>;

	m25p80@0 {

		compatible = "s25fl256s1";

		spi-max-frequency = <76800000>;

		reg = <0>;

		spi-tx-bus-width = <1>;

		spi-rx-bus-width = <4>;

		#address-cells = <1>;

		#size-cells = <1>;



		/* MTD partition table.

		 * The ROM checks the first four physical blocks

		 * for a valid file to boot and the flash here is

		 * 64KiB block size.

		 */

		partition@0 {

			label = "QSPI.SPL";

			reg = <0x00000000 0x000010000>;

		};

		partition@1 {

			label = "QSPI.SPL.backup1";

			reg = <0x00010000 0x00010000>;

		};

		partition@2 {

			label = "QSPI.SPL.backup2";

			reg = <0x00020000 0x00010000>;

		};

		partition@3 {

			label = "QSPI.SPL.backup3";

			reg = <0x00030000 0x00010000>;

		};

		partition@4 {

			label = "QSPI.u-boot";

			reg = <0x00040000 0x00100000>;

		};

		partition@5 {

			label = "QSPI.u-boot-spl-os";

			reg = <0x00140000 0x00080000>;

		};

		partition@6 {

			label = "QSPI.u-boot-env";

			reg = <0x001c0000 0x00010000>;

		};

		partition@7 {

			label = "QSPI.u-boot-env.backup1";

			reg = <0x001d0000 0x0010000>;

		};

		partition@8 {

			label = "QSPI.kernel";

			reg = <0x001e0000 0x0800000>;

		};

		partition@9 {

			label = "QSPI.file-system";

			reg = <0x009e0000 0x01620000>;

		};

	};

};



&omap_dwc3_1 {

	extcon = <&extcon_usb1>;

};



&usb1 {

	dr_mode = "otg";

	extcon = <&extcon_usb1>;

};



&usb2 {

	dr_mode = "host";

};



&atl {

	assigned-clocks = <&abe_dpll_sys_clk_mux>,

			  <&atl_gfclk_mux>,

			  <&dpll_abe_ck>,

			  <&dpll_abe_m2x2_ck>,

			  <&atl_clkin2_ck>;

	assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;

	assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;



	status = "okay";



	atl2 {

		bws = <DRA7_ATL_WS_MCASP2_FSX>;

		aws = <DRA7_ATL_WS_MCASP3_FSX>;

	};

};



&mcasp3 {

	#sound-dai-cells = <0>;



	assigned-clocks = <&mcasp3_ahclkx_mux>;

	assigned-clock-parents = <&atl_clkin2_ck>;



	status = "okay";



	op-mode = <0>;          /* MCASP_IIS_MODE */

	tdm-slots = <2>;

	/* 4 serializer */

	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */

		1 2 0 0

	>;

	tx-num-evt = <32>;

	rx-num-evt = <32>;

};



&mailbox5 {

	status = "okay";

	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {

		status = "okay";

	};

	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {

		status = "okay";

	};

};



&mailbox6 {

	status = "okay";

	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {

		status = "okay";

	};

	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {

		status = "okay";

	};

};

arch/arm/boot/dts/dra7-evm.dts

+1 −247
Original line number Diff line number Diff line
@@ -8,9 +8,7 @@ 
/dts-v1/;



#include "dra74x.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/clk/ti-dra7-atl.h>

#include <dt-bindings/input/input.h>

#include "dra7-evm-common.dtsi"



/ {

	model = "TI DRA742";
@@ -21,10 +19,6 @@ 
		reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */

	};



	chosen {

		stdout-path = &uart1;

	};



	evm_1v8_sw: fixedregulator-evm_1v8 {

		compatible = "regulator-fixed";

		regulator-name = "evm_1v8";
@@ -59,11 +53,6 @@ 
		regulator-max-microvolt = <1800000>;

	};



	extcon_usb1: extcon_usb1 {

		compatible = "linux,extcon-usb-gpio";

		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;

	};



	extcon_usb2: extcon_usb2 {

		compatible = "linux,extcon-usb-gpio";

		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
@@ -81,85 +70,6 @@ 
		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;

	};



	sound0: sound0 {

		compatible = "simple-audio-card";

		simple-audio-card,name = "DRA7xx-EVM";

		simple-audio-card,widgets =

			"Headphone", "Headphone Jack",

			"Line", "Line Out",

			"Microphone", "Mic Jack",

			"Line", "Line In";

		simple-audio-card,routing =

			"Headphone Jack",	"HPLOUT",

			"Headphone Jack",	"HPROUT",

			"Line Out",		"LLOUT",

			"Line Out",		"RLOUT",

			"MIC3L",		"Mic Jack",

			"MIC3R",		"Mic Jack",

			"Mic Jack",		"Mic Bias",

			"LINE1L",		"Line In",

			"LINE1R",		"Line In";

		simple-audio-card,format = "dsp_b";

		simple-audio-card,bitclock-master = <&sound0_master>;

		simple-audio-card,frame-master = <&sound0_master>;

		simple-audio-card,bitclock-inversion;



		sound0_master: simple-audio-card,cpu {

			sound-dai = <&mcasp3>;

			system-clock-frequency = <5644800>;

		};



		simple-audio-card,codec {

			sound-dai = <&tlv320aic3106>;

			clocks = <&atl_clkin2_ck>;

		};

	};



	leds {

		compatible = "gpio-leds";

		led0 {

			label = "dra7:usr1";

			gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;

			default-state = "off";

		};



		led1 {

			label = "dra7:usr2";

			gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;

			default-state = "off";

		};



		led2 {

			label = "dra7:usr3";

			gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;

			default-state = "off";

		};



		led3 {

			label = "dra7:usr4";

			gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;

			default-state = "off";

		};

	};



	gpio_keys {

		compatible = "gpio-keys";

		#address-cells = <1>;

		#size-cells = <0>;

		autorepeat;



		USER1 {

			label = "btnUser1";

			linux,code = <BTN_0>;

			gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;

		};



		USER2 {

			label = "btnUser2";

			linux,code = <BTN_1>;

			gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;

		};

	};

};



&dra7_pmx_core {
@@ -414,33 +324,6 @@ 
	};

};



&i2c3 {

	status = "okay";

	clock-frequency = <400000>;

};



&mcspi1 {

	status = "okay";

};



&mcspi2 {

	status = "okay";

};



&uart1 {

	status = "okay";

	interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,

			      <&dra7_pmx_core 0x3e0>;

};



&uart2 {

	status = "okay";

};



&uart3 {

	status = "okay";

};



&mmc1 {

	status = "okay";

	pinctrl-names = "default";
@@ -467,84 +350,10 @@ 
	cpu0-supply = <&smps123_reg>;

};



&qspi {

	status = "okay";



	spi-max-frequency = <76800000>;

	m25p80@0 {

		compatible = "s25fl256s1";

		spi-max-frequency = <76800000>;

		reg = <0>;

		spi-tx-bus-width = <1>;

		spi-rx-bus-width = <4>;

		#address-cells = <1>;

		#size-cells = <1>;



		/* MTD partition table.

		 * The ROM checks the first four physical blocks

		 * for a valid file to boot and the flash here is

		 * 64KiB block size.

		 */

		partition@0 {

			label = "QSPI.SPL";

			reg = <0x00000000 0x000010000>;

		};

		partition@1 {

			label = "QSPI.SPL.backup1";

			reg = <0x00010000 0x00010000>;

		};

		partition@2 {

			label = "QSPI.SPL.backup2";

			reg = <0x00020000 0x00010000>;

		};

		partition@3 {

			label = "QSPI.SPL.backup3";

			reg = <0x00030000 0x00010000>;

		};

		partition@4 {

			label = "QSPI.u-boot";

			reg = <0x00040000 0x00100000>;

		};

		partition@5 {

			label = "QSPI.u-boot-spl-os";

			reg = <0x00140000 0x00080000>;

		};

		partition@6 {

			label = "QSPI.u-boot-env";

			reg = <0x001c0000 0x00010000>;

		};

		partition@7 {

			label = "QSPI.u-boot-env.backup1";

			reg = <0x001d0000 0x0010000>;

		};

		partition@8 {

			label = "QSPI.kernel";

			reg = <0x001e0000 0x0800000>;

		};

		partition@9 {

			label = "QSPI.file-system";

			reg = <0x009e0000 0x01620000>;

		};

	};

};



&omap_dwc3_1 {

	extcon = <&extcon_usb1>;

};



&omap_dwc3_2 {

	extcon = <&extcon_usb2>;

};



&usb1 {

	dr_mode = "otg";

	extcon = <&extcon_usb1>;

};



&usb2 {

	dr_mode = "host";

};



&elm {

	status = "okay";

};
@@ -675,61 +484,6 @@ 
	pinctrl-2 = <&dcan1_pins_default>;

};



&atl {

	assigned-clocks = <&abe_dpll_sys_clk_mux>,

			  <&atl_gfclk_mux>,

			  <&dpll_abe_ck>,

			  <&dpll_abe_m2x2_ck>,

			  <&atl_clkin2_ck>;

	assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;

	assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;



	status = "okay";



	atl2 {

		bws = <DRA7_ATL_WS_MCASP2_FSX>;

		aws = <DRA7_ATL_WS_MCASP3_FSX>;

	};

};



&mcasp3 {

	#sound-dai-cells = <0>;



	assigned-clocks = <&mcasp3_ahclkx_mux>;

	assigned-clock-parents = <&atl_clkin2_ck>;



	status = "okay";



	op-mode = <0>;          /* MCASP_IIS_MODE */

	tdm-slots = <2>;

	/* 4 serializer */

	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */

		1 2 0 0

	>;

	tx-num-evt = <32>;

	rx-num-evt = <32>;

};



&mailbox5 {

	status = "okay";

	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {

		status = "okay";

	};

	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {

		status = "okay";

	};

};



&mailbox6 {

	status = "okay";

	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {

		status = "okay";

	};

	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {

		status = "okay";

	};

};



&pcie1_rc {

	status = "okay";

};

arch/arm/boot/dts/dra76-evm.dts

0 → 100644
+423 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */

/dts-v1/;



#include "dra76x.dtsi"

#include "dra7-evm-common.dtsi"

#include <dt-bindings/net/ti-dp83867.h>



/ {

	model = "TI DRA762 EVM";

	compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7";



	memory@0 {

		device_type = "memory";

		reg = <0x0 0x80000000 0x0 0x80000000>;

	};



	vsys_12v0: fixedregulator-vsys12v0 {

		/* main supply */

		compatible = "regulator-fixed";

		regulator-name = "vsys_12v0";

		regulator-min-microvolt = <12000000>;

		regulator-max-microvolt = <12000000>;

		regulator-always-on;

		regulator-boot-on;

	};



	vsys_5v0: fixedregulator-vsys5v0 {

		/* Output of Cntlr B of TPS43351-Q1 on dra76-evm */

		compatible = "regulator-fixed";

		regulator-name = "vsys_5v0";

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;

		vin-supply = <&vsys_12v0>;

		regulator-always-on;

		regulator-boot-on;

	};



	vsys_3v3: fixedregulator-vsys3v3 {

		/* Output of Cntlr A of TPS43351-Q1 on dra76-evm */

		compatible = "regulator-fixed";

		regulator-name = "vsys_3v3";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		vin-supply = <&vsys_12v0>;

		regulator-always-on;

		regulator-boot-on;

	};



	vio_3v3: fixedregulator-vio_3v3 {

		compatible = "regulator-fixed";

		regulator-name = "vio_3v3";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		vin-supply = <&vsys_3v3>;

		regulator-always-on;

		regulator-boot-on;

	};



	vio_3v3_sd: fixedregulator-sd {

		compatible = "regulator-fixed";

		regulator-name = "vio_3v3_sd";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		vin-supply = <&vio_3v3>;

		enable-active-high;

		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;

	};



	vio_1v8: fixedregulator-vio_1v8 {

		compatible = "regulator-fixed";

		regulator-name = "vio_1v8";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <1800000>;

		vin-supply = <&smps5_reg>;

	};



	vtt_fixed: fixedregulator-vtt {

		compatible = "regulator-fixed";

		regulator-name = "vtt_fixed";

		regulator-min-microvolt = <1350000>;

		regulator-max-microvolt = <1350000>;

		vin-supply = <&vsys_3v3>;

		regulator-always-on;

		regulator-boot-on;

	};



	aic_dvdd: fixedregulator-aic_dvdd {

		/* TPS77018DBVT */

		compatible = "regulator-fixed";

		regulator-name = "aic_dvdd";

		vin-supply = <&vio_3v3>;

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <1800000>;

	};

};



&dra7_pmx_core {

	mmc1_pins_default: mmc1_pins_default {

		pinctrl-single,pins = <

			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */

			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */

			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */

			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */

			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */

			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */

			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */

		>;

	};



	mmc1_pins_sdr12: pinmux_mmc1_sdr12_pins {

		pinctrl-single,pins = <

			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.clk */

			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */

			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.dat0 */

			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.dat1 */

			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.dat2 */

			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.dat3 */

		>;

	};



	mmc2_pins_default: mmc2_pins_default {

		pinctrl-single,pins = <

			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */

			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */

			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */

			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */

			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */

			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */

			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */

			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */

			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */

			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */

		>;

	};

};



&i2c1 {

	status = "okay";

	clock-frequency = <400000>;



	tps65917: tps65917@58 {

		compatible = "ti,tps65917";

		reg = <0x58>;

		ti,system-power-controller;

		interrupt-controller;

		#interrupt-cells = <2>;



		tps65917_pmic {

			compatible = "ti,tps65917-pmic";



			smps12-in-supply = <&vsys_3v3>;

			smps3-in-supply = <&vsys_3v3>;

			smps4-in-supply = <&vsys_3v3>;

			smps5-in-supply = <&vsys_3v3>;

			ldo1-in-supply = <&vsys_3v3>;

			ldo2-in-supply = <&vsys_3v3>;

			ldo3-in-supply = <&vsys_5v0>;

			ldo4-in-supply = <&vsys_5v0>;

			ldo5-in-supply = <&vsys_3v3>;



			tps65917_regulators: regulators {

				smps12_reg: smps12 {

					/* VDD_DSPEVE */

					regulator-name = "smps12";

					regulator-min-microvolt = <850000>;

					regulator-max-microvolt = <1250000>;

					regulator-always-on;

					regulator-boot-on;

				};



				smps3_reg: smps3 {

					/* VDD_CORE */

					regulator-name = "smps3";

					regulator-min-microvolt = <850000>;

					regulator-max-microvolt = <1250000>;

					regulator-boot-on;

					regulator-always-on;

				};



				smps4_reg: smps4 {

					/* VDD_IVA */

					regulator-name = "smps4";

					regulator-min-microvolt = <850000>;

					regulator-max-microvolt = <1250000>;

					regulator-always-on;

					regulator-boot-on;

				};



				smps5_reg: smps5 {

					/* VDDS1V8 */

					regulator-name = "smps5";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					regulator-boot-on;

					regulator-always-on;

				};



				ldo1_reg: ldo1 {

					/* LDO1_OUT --> VDA_PHY1_1V8  */

					regulator-name = "ldo1";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					regulator-always-on;

					regulator-boot-on;

					regulator-allow-bypass;

				};



				ldo2_reg: ldo2 {

					/* LDO2_OUT --> VDA_PHY2_1V8 */

					regulator-name = "ldo2";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					regulator-allow-bypass;

					regulator-always-on;

				};



				ldo3_reg: ldo3 {

					/* VDA_USB_3V3 */

					regulator-name = "ldo3";

					regulator-min-microvolt = <3300000>;

					regulator-max-microvolt = <3300000>;

					regulator-boot-on;

					regulator-always-on;

				};



				ldo5_reg: ldo5 {

					/* VDDA_1V8_PLL */

					regulator-name = "ldo5";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					regulator-always-on;

					regulator-boot-on;

				};



				ldo4_reg: ldo4 {

					/* VDD_SDIO_DV */

					regulator-name = "ldo4";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <3300000>;

					regulator-boot-on;

					regulator-always-on;

				};

			};

		};



		tps65917_power_button {

			compatible = "ti,palmas-pwrbutton";

			interrupt-parent = <&tps65917>;

			interrupts = <1 IRQ_TYPE_NONE>;

			wakeup-source;

			ti,palmas-long-press-seconds = <6>;

		};

	};



	lp87565: lp87565@60 {

		compatible = "ti,lp87565-q1";

		reg = <0x60>;



		buck10-in-supply =<&vsys_3v3>;

		buck23-in-supply =<&vsys_3v3>;



		regulators: regulators {

			buck10_reg: buck10 {

				/*VDD_MPU*/

				regulator-name = "buck10";

				regulator-min-microvolt = <850000>;

				regulator-max-microvolt = <1250000>;

				regulator-always-on;

				regulator-boot-on;

			};



			buck23_reg: buck23 {

				/* VDD_GPU*/

				regulator-name = "buck23";

				regulator-min-microvolt = <850000>;

				regulator-max-microvolt = <1250000>;

				regulator-boot-on;

				regulator-always-on;

			};

		};

	};



	pcf_lcd: pcf8757@20 {

		compatible = "ti,pcf8575", "nxp,pcf8575";

		reg = <0x20>;

		gpio-controller;

		#gpio-cells = <2>;

		interrupt-controller;

		#interrupt-cells = <2>;

		interrupt-parent = <&gpio1>;

		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;

	};



	pcf_gpio_21: pcf8757@21 {

		compatible = "ti,pcf8575", "nxp,pcf8575";

		reg = <0x21>;

		gpio-controller;

		#gpio-cells = <2>;

		interrupt-parent = <&gpio1>;

		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;

		interrupt-controller;

		#interrupt-cells = <2>;

	};



	pcf_hdmi: pcf8575@26 {

		compatible = "ti,pcf8575", "nxp,pcf8575";

		reg = <0x26>;

		gpio-controller;

		#gpio-cells = <2>;

		p1 {

			/* vin6_sel_s0: high: VIN6, low: audio */

			gpio-hog;

			gpios = <1 GPIO_ACTIVE_HIGH>;

			output-low;

			line-name = "vin6_sel_s0";

		};

	};



	tlv320aic3106: tlv320aic3106@19 {

		#sound-dai-cells = <0>;

		compatible = "ti,tlv320aic3106";

		reg = <0x19>;

		adc-settle-ms = <40>;

		ai3x-micbias-vg = <1>;		/* 2.0V */

		status = "okay";



		/* Regulators */

		AVDD-supply = <&vio_3v3>;

		IOVDD-supply = <&vio_3v3>;

		DRVDD-supply = <&vio_3v3>;

		DVDD-supply = <&aic_dvdd>;

	};

};



&cpu0 {

	vdd-supply = <&buck10_reg>;

};



&mmc1 {

	status = "okay";

	vmmc-supply = <&vio_3v3_sd>;

	vmmc_aux-supply = <&ldo4_reg>;

	bus-width = <4>;

	/*

	 * SDCD signal is not being used here - using the fact that GPIO mode

	 * is always hardwired.

	 */

	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;

	pinctrl-names = "default";

	pinctrl-0 = <&mmc1_pins_default>;

};



&mmc2 {

	status = "okay";

	vmmc-supply = <&vio_1v8>;

	bus-width = <8>;

	pinctrl-names = "default";

	pinctrl-0 = <&mmc2_pins_default>;

};



/* No RTC on this device */

&rtc {

	status = "disabled";

};



&mac {

	status = "okay";



	dual_emac;

};



&cpsw_emac0 {

	phy_id = <&davinci_mdio>, <2>;

	phy-mode = "rgmii-id";

	dual_emac_res_vlan = <1>;

};



&cpsw_emac1 {

	phy_id = <&davinci_mdio>, <3>;

	phy-mode = "rgmii-id";

	dual_emac_res_vlan = <2>;

};



&davinci_mdio {

	dp83867_0: ethernet-phy@2 {

		reg = <2>;

		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;

		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;

		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;

		ti,min-output-impedance;

		ti,dp83867-rxctrl-strap-quirk;

	};



	dp83867_1: ethernet-phy@3 {

		reg = <3>;

		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;

		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;

		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;

		ti,min-output-impedance;

		ti,dp83867-rxctrl-strap-quirk;

	};

};



&usb2_phy1 {

	phy-supply = <&ldo3_reg>;

};



&usb2_phy2 {

	phy-supply = <&ldo3_reg>;

};



&qspi {

	spi-max-frequency = <96000000>;

	m25p80@0 {

		spi-max-frequency = <96000000>;

	};

};