USB: cypress_m8: Speed handling (8873aaa6) · Commits · e / devices / android_kernel_oneplus_sm8150

drivers/usb/serial/cypress_m8.c

+29 −140

Original line number	Original line	Diff line number	Diff line
	@@ -147,7 +147,6 @@ struct cypress_private {
	enum packet_format pkt_fmt; /* format to use for packet send / receive */		enum packet_format pkt_fmt; /* format to use for packet send / receive */
	int get_cfg_unsafe; /* If true, the CYPRESS_GET_CONFIG is unsafe */		int get_cfg_unsafe; /* If true, the CYPRESS_GET_CONFIG is unsafe */
	int baud_rate; /* stores current baud rate in integer form */		int baud_rate; /* stores current baud rate in integer form */
	int cbr_mask; /* stores current baud rate in masked form */
	int isthrottled; /* if throttled, discard reads */		int isthrottled; /* if throttled, discard reads */
	wait_queue_head_t delta_msr_wait; /* used for TIOCMIWAIT */		wait_queue_head_t delta_msr_wait; /* used for TIOCMIWAIT */
	char prev_status, diff_status; /* used for TIOCMIWAIT */		char prev_status, diff_status; /* used for TIOCMIWAIT */
	@@ -183,9 +182,6 @@ static void cypress_unthrottle (struct usb_serial_port *port);
	static void cypress_set_dead (struct usb_serial_port *port);		static void cypress_set_dead (struct usb_serial_port *port);
	static void cypress_read_int_callback (struct urb *urb);		static void cypress_read_int_callback (struct urb *urb);
	static void cypress_write_int_callback (struct urb *urb);		static void cypress_write_int_callback (struct urb *urb);
	/* baud helper functions */
	static int mask_to_rate (unsigned mask);
	static unsigned rate_to_mask (int rate);
	/* write buffer functions */		/* write buffer functions */
	static struct cypress_buf *cypress_buf_alloc(unsigned int size);		static struct cypress_buf *cypress_buf_alloc(unsigned int size);
	static void cypress_buf_free(struct cypress_buf *cb);		static void cypress_buf_free(struct cypress_buf *cb);
	@@ -291,9 +287,8 @@ static struct usb_serial_driver cypress_ca42v2_device = {
	*****************************************************************************/		*****************************************************************************/


	static int analyze_baud_rate(struct usb_serial_port *port, unsigned baud_mask)		static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
	{		{
	int new_rate;
	struct cypress_private *priv;		struct cypress_private *priv;
	priv = usb_get_serial_port_data(port);		priv = usb_get_serial_port_data(port);

	@@ -306,12 +301,6 @@ static int analyze_baud_rate(struct usb_serial_port *port, unsigned baud_mask)
	* The Cypress HID->COM device will work successfully up to		* The Cypress HID->COM device will work successfully up to
	* 115200bps (but the actual throughput is around 3kBps).		* 115200bps (but the actual throughput is around 3kBps).
	*/		*/
	new_rate = mask_to_rate(baud_mask);
	if (new_rate < 0) {
	dbg("%s - failed setting baud rate, untranslatable speed",
	__func__);
	return -1;
	}
	if (port->serial->dev->speed == USB_SPEED_LOW) {		if (port->serial->dev->speed == USB_SPEED_LOW) {
	/*		/*
	* Mike Isely <isely@pobox.com> 2-Feb-2008: The		* Mike Isely <isely@pobox.com> 2-Feb-2008: The
	@@ -345,7 +334,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, unsigned baud_mask)


	/* This function can either set or retrieve the current serial line settings */		/* This function can either set or retrieve the current serial line settings */
	static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_mask, int data_bits, int stop_bits,		static int cypress_serial_control (struct usb_serial_port *port, speed_t baud_rate, int data_bits, int stop_bits,
	int parity_enable, int parity_type, int reset, int cypress_request_type)		int parity_enable, int parity_type, int reset, int cypress_request_type)
	{		{
	int new_baudrate = 0, retval = 0, tries = 0;		int new_baudrate = 0, retval = 0, tries = 0;
	@@ -363,9 +352,13 @@ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_m
	switch(cypress_request_type) {		switch(cypress_request_type) {
	case CYPRESS_SET_CONFIG:		case CYPRESS_SET_CONFIG:
	new_baudrate = priv->baud_rate;		new_baudrate = priv->baud_rate;
	if (baud_mask != priv->cbr_mask) {		/* 0 means 'Hang up' so doesn't change the true bit rate */
			if (baud_rate == 0)
			new_baudrate = priv->baud_rate;
			/* Change of speed ? */
			else if (baud_rate != priv->baud_rate) {
	dbg("%s - baud rate is changing", __FUNCTION__);		dbg("%s - baud rate is changing", __FUNCTION__);
	retval = analyze_baud_rate(port, baud_mask);		retval = analyze_baud_rate(port, baud_rate);
	if (retval >= 0) {		if (retval >= 0) {
	new_baudrate = retval;		new_baudrate = retval;
	dbg("%s - New baud rate set to %d",		dbg("%s - New baud rate set to %d",
	@@ -410,9 +403,12 @@ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_m
	} else {		} else {
	spin_lock_irqsave(&priv->lock, flags);		spin_lock_irqsave(&priv->lock, flags);
	priv->baud_rate = new_baudrate;		priv->baud_rate = new_baudrate;
	priv->cbr_mask = baud_mask;
	priv->current_config = feature_buffer[4];		priv->current_config = feature_buffer[4];
	spin_unlock_irqrestore(&priv->lock, flags);		spin_unlock_irqrestore(&priv->lock, flags);
			/* If we asked for a speed change encode it */
			if (baud_rate)
			tty_encode_baud_rate(port->tty,
			new_baudrate, new_baudrate);
	}		}
	break;		break;
	case CYPRESS_GET_CONFIG:		case CYPRESS_GET_CONFIG:
	@@ -450,9 +446,6 @@ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_m
	/* store the config in one byte, and later use bit masks to check values */		/* store the config in one byte, and later use bit masks to check values */
	priv->current_config = feature_buffer[4];		priv->current_config = feature_buffer[4];
	priv->baud_rate = ((u_int32_t )feature_buffer);		priv->baud_rate = ((u_int32_t )feature_buffer);

	if ( (priv->cbr_mask = rate_to_mask(priv->baud_rate)) == 0x40)
	dbg("%s - failed setting the baud mask (not defined)", __FUNCTION__);
	spin_unlock_irqrestore(&priv->lock, flags);		spin_unlock_irqrestore(&priv->lock, flags);
	}		}
	}		}
	@@ -482,51 +475,6 @@ static void cypress_set_dead(struct usb_serial_port *port)
	}		}


	/* given a baud mask, it will return integer baud on success */
	static int mask_to_rate (unsigned mask)
	{
	int rate;

	switch (mask) {
	case B0: rate = 0; break;
	case B300: rate = 300; break;
	case B600: rate = 600; break;
	case B1200: rate = 1200; break;
	case B2400: rate = 2400; break;
	case B4800: rate = 4800; break;
	case B9600: rate = 9600; break;
	case B19200: rate = 19200; break;
	case B38400: rate = 38400; break;
	case B57600: rate = 57600; break;
	case B115200: rate = 115200; break;
	default: rate = -1;
	}

	return rate;
	}


	static unsigned rate_to_mask (int rate)
	{
	unsigned mask;

	switch (rate) {
	case 0: mask = B0; break;
	case 300: mask = B300; break;
	case 600: mask = B600; break;
	case 1200: mask = B1200; break;
	case 2400: mask = B2400; break;
	case 4800: mask = B4800; break;
	case 9600: mask = B9600; break;
	case 19200: mask = B19200; break;
	case 38400: mask = B38400; break;
	case 57600: mask = B57600; break;
	case 115200: mask = B115200; break;
	default: mask = 0x40;
	}

	return mask;
	}
	/*****************************************************************************		/*****************************************************************************
	* Cypress serial driver functions		* Cypress serial driver functions
	*****************************************************************************/		*****************************************************************************/
	@@ -558,7 +506,6 @@ static int generic_startup (struct usb_serial *serial)
	priv->line_control = 0;		priv->line_control = 0;
	priv->termios_initialized = 0;		priv->termios_initialized = 0;
	priv->rx_flags = 0;		priv->rx_flags = 0;
	priv->cbr_mask = B300;
	/* Default packet format setting is determined by packet size.		/* Default packet format setting is determined by packet size.
	Anything with a size larger then 9 must have a separate		Anything with a size larger then 9 must have a separate
	count field since the 3 bit count field is otherwise too		count field since the 3 bit count field is otherwise too
	@@ -1004,9 +951,9 @@ static int cypress_tiocmset (struct usb_serial_port port, struct file file,
	priv->line_control &= ~CONTROL_RTS;		priv->line_control &= ~CONTROL_RTS;
	if (clear & TIOCM_DTR)		if (clear & TIOCM_DTR)
	priv->line_control &= ~CONTROL_DTR;		priv->line_control &= ~CONTROL_DTR;
			priv->cmd_ctrl = 1;
	spin_unlock_irqrestore(&priv->lock, flags);		spin_unlock_irqrestore(&priv->lock, flags);

	priv->cmd_ctrl = 1;
	return cypress_write(port, NULL, 0);		return cypress_write(port, NULL, 0);
	}		}

	@@ -1018,20 +965,6 @@ static int cypress_ioctl (struct usb_serial_port port, struct file file, unsi
	dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);		dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);

	switch (cmd) {		switch (cmd) {
	case TIOCGSERIAL:
	if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct ktermios))) {
	return -EFAULT;
	}
	return (0);
	break;
	case TIOCSSERIAL:
	if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct ktermios))) {
	return -EFAULT;
	}
	/* here we need to call cypress_set_termios to invoke the new settings */
	cypress_set_termios(port, &priv->tmp_termios);
	return (0);
	break;
	/* This code comes from drivers/char/serial.c and ftdi_sio.c */		/* This code comes from drivers/char/serial.c and ftdi_sio.c */
	case TIOCMIWAIT:		case TIOCMIWAIT:
	while (priv != NULL) {		while (priv != NULL) {
	@@ -1079,7 +1012,7 @@ static void cypress_set_termios (struct usb_serial_port *port,
	struct cypress_private *priv = usb_get_serial_port_data(port);		struct cypress_private *priv = usb_get_serial_port_data(port);
	struct tty_struct *tty;		struct tty_struct *tty;
	int data_bits, stop_bits, parity_type, parity_enable;		int data_bits, stop_bits, parity_type, parity_enable;
	unsigned cflag, iflag, baud_mask;		unsigned cflag, iflag;
	unsigned long flags;		unsigned long flags;
	__u8 oldlines;		__u8 oldlines;
	int linechange = 0;		int linechange = 0;
	@@ -1087,10 +1020,6 @@ static void cypress_set_termios (struct usb_serial_port *port,
	dbg("%s - port %d", __FUNCTION__, port->number);		dbg("%s - port %d", __FUNCTION__, port->number);

	tty = port->tty;		tty = port->tty;
	if ((!tty) \|\| (!tty->termios)) {
	dbg("%s - no tty structures", __FUNCTION__);
	return;
	}

	spin_lock_irqsave(&priv->lock, flags);		spin_lock_irqsave(&priv->lock, flags);
	if (!priv->termios_initialized) {		if (!priv->termios_initialized) {
	@@ -1098,40 +1027,37 @@ static void cypress_set_termios (struct usb_serial_port *port,
	*(tty->termios) = tty_std_termios;		*(tty->termios) = tty_std_termios;
	tty->termios->c_cflag = B4800 \| CS8 \| CREAD \| HUPCL \|		tty->termios->c_cflag = B4800 \| CS8 \| CREAD \| HUPCL \|
	CLOCAL;		CLOCAL;
			tty->termios->c_ispeed = 4800;
			tty->termios->c_ospeed = 4800;
	} else if (priv->chiptype == CT_CYPHIDCOM) {		} else if (priv->chiptype == CT_CYPHIDCOM) {
	*(tty->termios) = tty_std_termios;		*(tty->termios) = tty_std_termios;
	tty->termios->c_cflag = B9600 \| CS8 \| CREAD \| HUPCL \|		tty->termios->c_cflag = B9600 \| CS8 \| CREAD \| HUPCL \|
	CLOCAL;		CLOCAL;
			tty->termios->c_ispeed = 9600;
			tty->termios->c_ospeed = 9600;
	} else if (priv->chiptype == CT_CA42V2) {		} else if (priv->chiptype == CT_CA42V2) {
	*(tty->termios) = tty_std_termios;		*(tty->termios) = tty_std_termios;
	tty->termios->c_cflag = B9600 \| CS8 \| CREAD \| HUPCL \|		tty->termios->c_cflag = B9600 \| CS8 \| CREAD \| HUPCL \|
	CLOCAL;		CLOCAL;
			tty->termios->c_ispeed = 9600;
			tty->termios->c_ospeed = 9600;
	}		}
	priv->termios_initialized = 1;		priv->termios_initialized = 1;
	}		}
	spin_unlock_irqrestore(&priv->lock, flags);		spin_unlock_irqrestore(&priv->lock, flags);

			/* Unsupported features need clearing */
			tty->termios->c_cflag &= ~(CMSPAR\|CRTSCTS);

	cflag = tty->termios->c_cflag;		cflag = tty->termios->c_cflag;
	iflag = tty->termios->c_iflag;		iflag = tty->termios->c_iflag;

	/* check if there are new settings */		/* check if there are new settings */
	if (old_termios) {		if (old_termios) {
	if ((cflag != old_termios->c_cflag) \|\|
	(RELEVANT_IFLAG(iflag) !=
	RELEVANT_IFLAG(old_termios->c_iflag))) {
	dbg("%s - attempting to set new termios settings",
	__FUNCTION__);
	/* should make a copy of this in case something goes
	* wrong in the function, we can restore it */
	spin_lock_irqsave(&priv->lock, flags);		spin_lock_irqsave(&priv->lock, flags);
	priv->tmp_termios = *(tty->termios);		priv->tmp_termios = *(tty->termios);
	spin_unlock_irqrestore(&priv->lock, flags);		spin_unlock_irqrestore(&priv->lock, flags);
	} else {
	dbg("%s - nothing to do, exiting", __FUNCTION__);
	return;
	}		}
	} else
	return;

	/* set number of data bits, parity, stop bits */		/* set number of data bits, parity, stop bits */
	/* when parity is disabled the parity type bit is ignored */		/* when parity is disabled the parity type bit is ignored */
	@@ -1173,53 +1099,16 @@ static void cypress_set_termios (struct usb_serial_port *port,
	if ((cflag & CBAUD) == B0) {		if ((cflag & CBAUD) == B0) {
	/* drop dtr and rts */		/* drop dtr and rts */
	dbg("%s - dropping the lines, baud rate 0bps", __FUNCTION__);		dbg("%s - dropping the lines, baud rate 0bps", __FUNCTION__);
	baud_mask = B0;
	priv->line_control &= ~(CONTROL_DTR \| CONTROL_RTS);		priv->line_control &= ~(CONTROL_DTR \| CONTROL_RTS);
	} else {		} else
	baud_mask = (cflag & CBAUD);
	switch(baud_mask) {
	case B300:
	dbg("%s - setting baud 300bps", __FUNCTION__);
	break;
	case B600:
	dbg("%s - setting baud 600bps", __FUNCTION__);
	break;
	case B1200:
	dbg("%s - setting baud 1200bps", __FUNCTION__);
	break;
	case B2400:
	dbg("%s - setting baud 2400bps", __FUNCTION__);
	break;
	case B4800:
	dbg("%s - setting baud 4800bps", __FUNCTION__);
	break;
	case B9600:
	dbg("%s - setting baud 9600bps", __FUNCTION__);
	break;
	case B19200:
	dbg("%s - setting baud 19200bps", __FUNCTION__);
	break;
	case B38400:
	dbg("%s - setting baud 38400bps", __FUNCTION__);
	break;
	case B57600:
	dbg("%s - setting baud 57600bps", __FUNCTION__);
	break;
	case B115200:
	dbg("%s - setting baud 115200bps", __FUNCTION__);
	break;
	default:
	dbg("%s - unknown masked baud rate", __FUNCTION__);
	}
	priv->line_control = (CONTROL_DTR \| CONTROL_RTS);		priv->line_control = (CONTROL_DTR \| CONTROL_RTS);
	}
	spin_unlock_irqrestore(&priv->lock, flags);		spin_unlock_irqrestore(&priv->lock, flags);

	dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, "		dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, "
	"%d data_bits (+5)", __FUNCTION__, stop_bits,		"%d data_bits (+5)", __FUNCTION__, stop_bits,
	parity_enable, parity_type, data_bits);		parity_enable, parity_type, data_bits);

	cypress_serial_control(port, baud_mask, data_bits, stop_bits,		cypress_serial_control(port, tty_get_baud_rate(tty), data_bits, stop_bits,
	parity_enable, parity_type, 0, CYPRESS_SET_CONFIG);		parity_enable, parity_type, 0, CYPRESS_SET_CONFIG);

	/* we perform a CYPRESS_GET_CONFIG so that the current settings are		/* we perform a CYPRESS_GET_CONFIG so that the current settings are