Merge "ARM: dts: msm: add display support for TRINKET" (82433d5b) · Commits · e / devices / android_kernel_oneplus_sm8150

arch/arm64/boot/dts/qcom/trinket-idp-overlay.dts

+4 −0

Original line number	Diff line number	Diff line
		@@ -23,3 +23,7 @@
		qcom,msm-id = <394 0x10000>;
		qcom,board-id = <34 0>;
		};

		&dsi_td4330_truly_vid_display {
		qcom,dsi-display-active;
		};

arch/arm64/boot/dts/qcom/trinket-idp.dtsi

+20 −0

Original line number	Diff line number	Diff line
		@@ -13,6 +13,7 @@
		#include <dt-bindings/gpio/gpio.h>

		#include "trinket-thermal-overlay.dtsi"
		#include "trinket-sde-display.dtsi"

		&qupv3_se1_i2c {
		status = "ok";
		@@ -179,3 +180,22 @@

		status = "ok";
		};

		&dsi_td4330_truly_video {
		qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
		qcom,mdss-dsi-bl-min-level = <1>;
		qcom,mdss-dsi-bl-max-level = <4095>;
		qcom,platform-reset-gpio = <&tlmm 90 0>;
		qcom,platform-bklight-en-gpio = <&pmi632_gpios 6 0>;
		};

		&dsi_td4330_truly_cmd {
		qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
		qcom,mdss-dsi-bl-min-level = <1>;
		qcom,mdss-dsi-bl-max-level = <4095>;
		qcom,platform-te-gpio = <&tlmm 89 0>;
		qcom,platform-reset-gpio = <&tlmm 90 0>;
		qcom,platform-bklight-en-gpio = <&pmi632_gpios 6 0>;
		};

arch/arm64/boot/dts/qcom/trinket-pinctrl.dtsi

+56 −0

Original line number	Diff line number	Diff line
		@@ -976,6 +976,62 @@
		};
		};

		pmx_sde: pmx_sde {
		sde_dsi_active: sde_dsi_active {
		mux {
		pins = "gpio90";
		function = "gpio";
		};

		config {
		pins = "gpio90";
		drive-strength = <8>; /* 8 mA */
		bias-disable = <0>; /* no pull */
		};
		};

		sde_dsi_suspend: sde_dsi_suspend {
		mux {
		pins = "gpio90";
		function = "gpio";
		};

		config {
		pins = "gpio90";
		drive-strength = <2>; /* 2 mA */
		bias-pull-down; /* PULL DOWN */
		};
		};
		};

		pmx_sde_te {
		sde_te_active: sde_te_active {
		mux {
		pins = "gpio89";
		function = "mdp_vsync";
		};

		config {
		pins = "gpio89";
		drive-strength = <2>; /* 2 mA */
		bias-pull-down; /* PULL DOWN */
		};
		};

		sde_te_suspend: sde_te_suspend {
		mux {
		pins = "gpio89";
		function = "mdp_vsync";
		};

		config {
		pins = "gpio89";
		drive-strength = <2>; /* 2 mA */
		bias-pull-down; /* PULL DOWN */
		};
		};
		};

		/* SDC pin type */
		sdc1_clk_on: sdc1_clk_on {
		config {

arch/arm64/boot/dts/qcom/trinket-sde-display.dtsi

0 → 100644

+183 −0

Original line number	Diff line number	Diff line
		/* Copyright (c) 2019, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		#include "dsi-panel-td4330-truly-singlemipi-fhd-cmd.dtsi"
		#include "dsi-panel-td4330-truly-singlemipi-fhd-video.dtsi"
		#include <dt-bindings/clock/mdss-14nm-pll-clk.h>

		&soc {
		dsi_panel_pwr_supply: dsi_panel_pwr_supply {
		#address-cells = <1>;
		#size-cells = <0>;

		qcom,panel-supply-entry@0 {
		reg = <0>;
		qcom,supply-name = "vddio";
		qcom,supply-min-voltage = <1800000>;
		qcom,supply-max-voltage = <1800000>;
		qcom,supply-enable-load = <62000>;
		qcom,supply-disable-load = <80>;
		qcom,supply-post-on-sleep = <20>;
		};

		qcom,panel-supply-entry@1 {
		reg = <1>;
		qcom,supply-name = "lab";
		qcom,supply-min-voltage = <4600000>;
		qcom,supply-max-voltage = <6000000>;
		qcom,supply-enable-load = <100000>;
		qcom,supply-disable-load = <100>;
		};

		qcom,panel-supply-entry@2 {
		reg = <2>;
		qcom,supply-name = "ibb";
		qcom,supply-min-voltage = <4600000>;
		qcom,supply-max-voltage = <6000000>;
		qcom,supply-enable-load = <100000>;
		qcom,supply-disable-load = <100>;
		qcom,supply-post-on-sleep = <20>;
		};
		};

		dsi_panel_pwr_supply_no_labibb: dsi_panel_pwr_supply_no_labibb {
		#address-cells = <1>;
		#size-cells = <0>;

		qcom,panel-supply-entry@0 {
		reg = <0>;
		qcom,supply-name = "vddio";
		qcom,supply-min-voltage = <1800000>;
		qcom,supply-max-voltage = <1800000>;
		qcom,supply-enable-load = <62000>;
		qcom,supply-disable-load = <80>;
		qcom,supply-post-on-sleep = <20>;
		};
		};

		dsi_panel_pwr_supply_labibb_amoled: dsi_panel_pwr_supply_labibb_amoled {
		#address-cells = <1>;
		#size-cells = <0>;

		qcom,panel-supply-entry@0 {
		reg = <0>;
		qcom,supply-name = "vddio";
		qcom,supply-min-voltage = <1800000>;
		qcom,supply-max-voltage = <1800000>;
		qcom,supply-enable-load = <62000>;
		qcom,supply-disable-load = <80>;
		qcom,supply-post-on-sleep = <20>;
		};

		qcom,panel-supply-entry@1 {
		reg = <1>;
		qcom,supply-name = "vdda-3p3";
		qcom,supply-min-voltage = <3000000>;
		qcom,supply-max-voltage = <3000000>;
		qcom,supply-enable-load = <13200>;
		qcom,supply-disable-load = <80>;
		};
		};

		dsi_td4330_truly_vid_display: qcom,dsi-display@0 {
		label = "dsi_td4330_truly_vid_display";
		qcom,display-type = "primary";

		qcom,dsi-ctrl-num = <0>;
		qcom,dsi-phy-num = <0>;
		qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0";

		qcom,dsi-panel = <&dsi_td4330_truly_video>;
		};

		dsi_td4330_truly_cmd_display: qcom,dsi-display@1 {
		label = "dsi_td4330_truly_cmd_display";
		qcom,display-type = "primary";

		qcom,dsi-ctrl-num = <0>;
		qcom,dsi-phy-num = <0>;
		qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0";

		qcom,dsi-panel = <&dsi_td4330_truly_cmd>;
		};

		sde_dsi: qcom,dsi-display {
		compatible = "qcom,dsi-display";

		qcom,dsi-ctrl = <&mdss_dsi0>;
		qcom,dsi-phy = <&mdss_dsi_phy0>;

		clocks = <&mdss_dsi0_pll BYTE0_MUX_CLK>,
		<&mdss_dsi0_pll PIX0_MUX_CLK>;
		clock-names = "src_byte_clk0", "src_pixel_clk0";
		pinctrl-names = "panel_active", "panel_suspend";
		pinctrl-0 = <&sde_dsi_active &sde_te_active>;
		pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>;

		qcom,platform-te-gpio = <&tlmm 89 0>;

		vddio-supply = <&L9A>;
		lab-supply = <&lcdb_ldo_vreg>;
		ibb-supply = <&lcdb_ncp_vreg>;

		qcom,dsi-display-list =
		<&dsi_td4330_truly_vid_display
		&dsi_td4330_truly_cmd_display>;
		};

		sde_wb: qcom,wb-display@0 {
		compatible = "qcom,wb-display";
		cell-index = <0>;
		label = "wb_display";
		};

		};

		&mdss_mdp {
		connectors = <&sde_wb &sde_dsi>;
		};

		&dsi_td4330_truly_cmd {
		qcom,mdss-dsi-t-clk-post = <0x0e>;
		qcom,mdss-dsi-t-clk-pre = <0x36>;
		qcom,mdss-dsi-display-timings {
		timing@0{
		qcom,mdss-dsi-panel-phy-timings =
		[26 20 09 0B 06 02 04 a0
		26 20 09 0B 06 02 04 a0
		26 20 09 0B 06 02 04 a0
		26 20 09 0B 06 02 04 a0
		26 1F 09 0B 06 02 04 a0];

		qcom,display-topology = <1 0 1>;
		qcom,default-topology-index = <0>;
		};
		};
		};

		&dsi_td4330_truly_video {
		qcom,mdss-dsi-t-clk-post = <0x0e>;
		qcom,mdss-dsi-t-clk-pre = <0x36>;
		qcom,mdss-dsi-display-timings {
		timing@0{
		qcom,mdss-dsi-panel-phy-timings =
		[26 20 09 0B 06 02 04 a0
		26 20 09 0B 06 02 04 a0
		26 20 09 0B 06 02 04 a0
		26 20 09 0B 06 02 04 a0
		26 1F 09 0B 06 02 04 a0];

		qcom,display-topology = <1 0 1>;
		qcom,default-topology-index = <0>;
		};
		};
		};

arch/arm64/boot/dts/qcom/trinket-sde-pll.dtsi

0 → 100644

+41 −0

Original line number	Diff line number	Diff line
		/* Copyright (c) 2019, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		&soc {
		mdss_dsi0_pll: qcom,mdss_dsi_pll@5e94400 {
		compatible = "qcom,mdss_dsi_pll_14nm";
		label = "MDSS DSI 0 PLL";
		cell-index = <0>;
		#clock-cells = <1>;
		reg = <0x5e94400 0x588>,
		<0x5f03000 0x8>;
		reg-names = "pll_base", "gdsc_base";
		clocks = <&clock_dispcc DISP_CC_MDSS_AHB_CLK>;
		clock-names = "iface_clk";
		clock-rate = <0>;
		gdsc-supply = <&mdss_core_gdsc>;
		qcom,dsi-pll-ssc-en;
		qcom,dsi-pll-ssc-mode = "down-spread";
		qcom,platform-supply-entries {
		#address-cells = <1>;
		#size-cells = <0>;
		qcom,platform-supply-entry@0 {
		reg = <0>;
		qcom,supply-name = "gdsc";
		qcom,supply-min-voltage = <0>;
		qcom,supply-max-voltage = <0>;
		qcom,supply-enable-load = <0>;
		qcom,supply-disable-load = <0>;
		};
		};
		};
		};