Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 7fee5372 authored by Johannes Berg's avatar Johannes Berg Committed by John W. Linville
Browse files

mac80211: remove HW_SIGNAL_DB



Giving the signal in dB isn't much more useful to userspace
than giving the signal in unspecified units. This removes
some radiotap information for zd1211 (the only driver using
this flag), but it helps a lot for getting cfg80211-based
scanning which won't support dB, and zd1211 being dB is a
little fishy anyway.

Signed-off-by: default avatarJohannes Berg <johannes@sipsolutions.net>
Cc: Bruno Randolf <bruno@thinktube.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 7a7dec65
Loading
Loading
Loading
Loading
+1 −1
Original line number Diff line number Diff line
@@ -967,7 +967,7 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf)
	hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &mac->band;

	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
		    IEEE80211_HW_SIGNAL_DB;
		    IEEE80211_HW_SIGNAL_UNSPEC;

	hw->wiphy->interface_modes =
		BIT(NL80211_IFTYPE_MESH_POINT) |
+8 −14
Original line number Diff line number Diff line
@@ -860,11 +860,6 @@ enum ieee80211_tkip_key_type {
 *	expect values between 0 and @max_signal.
 *	If possible please provide dB or dBm instead.
 *
 * @IEEE80211_HW_SIGNAL_DB:
 *	Hardware gives signal values in dB, decibel difference from an
 *	arbitrary, fixed reference. We expect values between 0 and @max_signal.
 *	If possible please provide dBm instead.
 *
 * @IEEE80211_HW_SIGNAL_DBM:
 *	Hardware gives signal values in dBm, decibel difference from
 *	one milliwatt. This is the preferred method since it is standardized
@@ -900,15 +895,14 @@ enum ieee80211_hw_flags {
	IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE		= 1<<3,
	IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE	= 1<<4,
	IEEE80211_HW_SIGNAL_UNSPEC			= 1<<5,
	IEEE80211_HW_SIGNAL_DB				= 1<<6,
	IEEE80211_HW_SIGNAL_DBM				= 1<<7,
	IEEE80211_HW_NOISE_DBM				= 1<<8,
	IEEE80211_HW_SPECTRUM_MGMT			= 1<<9,
	IEEE80211_HW_AMPDU_AGGREGATION			= 1<<10,
	IEEE80211_HW_SUPPORTS_PS			= 1<<11,
	IEEE80211_HW_PS_NULLFUNC_STACK			= 1<<12,
	IEEE80211_HW_SUPPORTS_DYNAMIC_PS		= 1<<13,
	IEEE80211_HW_MFP_CAPABLE			= 1<<14,
	IEEE80211_HW_SIGNAL_DBM				= 1<<6,
	IEEE80211_HW_NOISE_DBM				= 1<<7,
	IEEE80211_HW_SPECTRUM_MGMT			= 1<<8,
	IEEE80211_HW_AMPDU_AGGREGATION			= 1<<9,
	IEEE80211_HW_SUPPORTS_PS			= 1<<10,
	IEEE80211_HW_PS_NULLFUNC_STACK			= 1<<11,
	IEEE80211_HW_SUPPORTS_DYNAMIC_PS		= 1<<12,
	IEEE80211_HW_MFP_CAPABLE			= 1<<13,
};

/**
+0 −1
Original line number Diff line number Diff line
@@ -884,7 +884,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
	local->hw.conf.listen_interval = local->hw.max_listen_interval;

	local->wstats_flags |= local->hw.flags & (IEEE80211_HW_SIGNAL_UNSPEC |
						  IEEE80211_HW_SIGNAL_DB |
						  IEEE80211_HW_SIGNAL_DBM) ?
			       IW_QUAL_QUAL_UPDATED : IW_QUAL_QUAL_INVALID;
	local->wstats_flags |= local->hw.flags & IEEE80211_HW_NOISE_DBM ?
+1 −10
Original line number Diff line number Diff line
@@ -86,8 +86,7 @@ ieee80211_rx_radiotap_len(struct ieee80211_local *local,

	if (status->flag & RX_FLAG_TSFT)
		len += 8;
	if (local->hw.flags & IEEE80211_HW_SIGNAL_DB ||
	    local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
	if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
		len += 1;
	if (local->hw.flags & IEEE80211_HW_NOISE_DBM)
		len += 1;
@@ -199,14 +198,6 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local,
	*pos = status->antenna;
	pos++;

	/* IEEE80211_RADIOTAP_DB_ANTSIGNAL */
	if (local->hw.flags & IEEE80211_HW_SIGNAL_DB) {
		*pos = status->signal;
		rthdr->it_present |=
			cpu_to_le32(1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL);
		pos++;
	}

	/* IEEE80211_RADIOTAP_DB_ANTNOISE is not used */

	/* IEEE80211_RADIOTAP_RX_FLAGS */
+1 −2
Original line number Diff line number Diff line
@@ -173,8 +173,7 @@ static int ieee80211_ioctl_giwrange(struct net_device *dev,
	range->num_encoding_sizes = 2;
	range->max_encoding_tokens = NUM_DEFAULT_KEYS;

	if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC ||
	    local->hw.flags & IEEE80211_HW_SIGNAL_DB)
	if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
		range->max_qual.level = local->hw.max_signal;
	else if  (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
		range->max_qual.level = -110;