Merge "DOWNSTREAM commit '90c19c17' AU415" into dev/msm-4.14-camx

Qualcomm Technologies, Inc. Core Control for Hypervisor

Required properties:

- compatible: should be "qcom,hyp-core-ctl"

- reg: An array of u32 values. reg[0] contains the token id to be used

       for hyp core_ctl system calls to set/get physical CPUs corresponding

       to the virtual CPUs. reg[1] ... reg[n] indicate the token ids

       to be used while referring to the virtual CPUs respectively.

Example:

	hyp-core-ctl@346 {

		compatible = "qcom,hyp-core-ctl";

		reg = <0x346 0x347 0x348>;

	};

- qcom,csra-max-devs : Maximum number of CSRA66x0 devices present in the target

- qcom,csra-devs : List of phandles of all possible CSRA66x0 devices supported for the target

- qcom,csra-aux-dev-prefix : Name prefix in multi-channel configuration for CSRA66x0 device

- qcom,afe-rxtx-lb: AFE RX to TX loopback.

Example:

	qcs405_snd {

 - qcom,vbus-valid-override: If present, indicates VBUS pin is not connected to

   the USB PHY and the controller must rely on external VBUS notification in

   order to manually relay the notification to the SSPHY.

 - qcom,vdd-max-load-uA: If present, indicates the maximum current (in uA) the

   PHY is expected to draw from the vdd power supply.

 - qcom,core-voltage-level: This property must be a list of three integer

   values (no, min, max) where each value represents either a voltage in

 - qcom,core-max-load-uA: If present, indicates the maximum current (in uA) the

   PHY is expected to draw from the core power supply.

   microvolts or a value corresponding to voltage corner.

 - qcom,link-training-reset: This property indicates to start link training

   timer to reset the elastic buffer based on rx equalization value.

CONFIG_IP6_NF_RAW=y

CONFIG_BRIDGE_NF_EBTABLES=y

CONFIG_BRIDGE_EBT_BROUTE=y

CONFIG_BRIDGE_EBT_T_FILTER=y

CONFIG_BRIDGE_EBT_T_NAT=y

CONFIG_BRIDGE_EBT_ARP=y

CONFIG_BRIDGE_EBT_IP=y

CONFIG_BRIDGE_EBT_IP6=y

CONFIG_BRIDGE_EBT_ARPREPLY=y

CONFIG_BRIDGE_EBT_DNAT=y

CONFIG_BRIDGE_EBT_SNAT=y

CONFIG_L2TP=y

CONFIG_L2TP_V3=y

CONFIG_L2TP_IP=y

CONFIG_NET_SCH_PRIO=y

CONFIG_NET_CLS_FW=y

CONFIG_NET_CLS_U32=y

CONFIG_CLS_U32_MARK=y

CONFIG_NET_CLS_FLOW=y

CONFIG_NET_EMATCH=y

CONFIG_NET_EMATCH_CMP=y

CONFIG_BLK_DEV_SD=y

CONFIG_CHR_DEV_SG=y

CONFIG_CHR_DEV_SCH=y

CONFIG_SCSI_CONSTANTS=y

CONFIG_SCSI_LOGGING=y

CONFIG_SCSI_SCAN_ASYNC=y

CONFIG_SCSI_UFSHCD=y

CONFIG_SCSI_UFSHCD_PLATFORM=y

CONFIG_MD=y

CONFIG_BLK_DEV_DM=y

CONFIG_DM_CRYPT=y

CONFIG_DM_VERITY=y

CONFIG_DM_VERITY_FEC=y

CONFIG_NETDEVICES=y

CONFIG_DUMMY=y

CONFIG_TUN=y

CONFIG_QTI_VIRTUAL_SENSOR=y

CONFIG_QTI_QMI_COOLING_DEVICE=y

CONFIG_REGULATOR_COOLING_DEVICE=y

CONFIG_QTI_ADC_TM=y

CONFIG_QTI_RPM_SMD_COOLING_DEVICE=y

CONFIG_MFD_SPMI_PMIC=y

CONFIG_REGULATOR=y

CONFIG_SND_SOC=y

CONFIG_HIDRAW=y

CONFIG_UHID=y

CONFIG_HID_APPLE=y

CONFIG_HID_ELECOM=y

CONFIG_HID_MAGICMOUSE=y

CONFIG_HID_MICROSOFT=y

CONFIG_HID_MULTITOUCH=y

CONFIG_USB_HIDDEV=y

CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

CONFIG_USB_MON=y

CONFIG_MMC_CQ_HCI=y

CONFIG_NEW_LEDS=y

CONFIG_LEDS_CLASS=y

CONFIG_LEDS_PCA9956B=y

CONFIG_LEDS_TRIGGERS=y

CONFIG_RTC_CLASS=y

CONFIG_RTC_DRV_QPNP=y

CONFIG_PRINTK_TIME=y

CONFIG_DEBUG_INFO=y

CONFIG_PAGE_OWNER=y

CONFIG_MAGIC_SYSRQ=y

CONFIG_PANIC_ON_RECURSIVE_FAULT=y

CONFIG_PANIC_ON_OOPS=y

CONFIG_PANIC_TIMEOUT=5

CONFIG_SCHEDSTATS=y

CONFIG_IPC_LOGGING=y

CONFIG_CORESIGHT=y

CONFIG_CORESIGHT_LINK_AND_SINK_TMC=y

CONFIG_CORESIGHT_DYNAMIC_REPLICATOR=y

CONFIG_CORESIGHT_STM=y

CONFIG_CORESIGHT_CTI=y

CONFIG_CORESIGHT_TPDA=y

CONFIG_CORESIGHT_TPDM=y

CONFIG_CORESIGHT_HWEVENT=y

CONFIG_CORESIGHT_DUMMY=y

CONFIG_CORESIGHT_EVENT=y

CONFIG_QCOM_RTB=y

CONFIG_QCOM_RTB_SEPARATE_CPUS=y

CONFIG_SECURITY_PERF_EVENTS_RESTRICT=y

CONFIG_SECURITY=y

CONFIG_SECURITY_NETWORK=y

CONFIG_QTI_VIRTUAL_SENSOR=y

CONFIG_QTI_QMI_COOLING_DEVICE=y

CONFIG_REGULATOR_COOLING_DEVICE=y

CONFIG_QTI_ADC_TM=y

CONFIG_QTI_RPM_SMD_COOLING_DEVICE=y

CONFIG_MFD_SPMI_PMIC=y

CONFIG_REGULATOR=y

CONFIG_MMC_CQ_HCI=y

CONFIG_NEW_LEDS=y

CONFIG_LEDS_CLASS=y

CONFIG_LEDS_PCA9956B=y

CONFIG_LEDS_TRIGGERS=y

CONFIG_RTC_CLASS=y

CONFIG_RTC_DRV_QPNP=y