Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 7aef06db authored by Roberto Medina's avatar Roberto Medina Committed by David S. Miller
Browse files

net: ethernet: realtek: atp: checkpatch errors and warnings corrected 



Several warnings and errors of coding style rules corrected.
Compile tested.

Signed-off-by: default avatarRoberto Medina <robertoxmed@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 432c856f

drivers/net/ethernet/realtek/atp.h

+127 −119
Original line number Diff line number Diff line
@@ -29,9 +29,10 @@ struct rx_header { 
#define RdAddr	0xC0

#define HNib	0x10



enum page0_regs

{

    /* The first six registers hold the ethernet physical station address. */

enum page0_regs {

	/* The first six registers hold

	 * the ethernet physical station address.

	 */

	PAR0 = 0, PAR1 = 1, PAR2 = 2, PAR3 = 3, PAR4 = 4, PAR5 = 5,

	TxCNT0 = 6, TxCNT1 = 7,		/* The transmit byte count. */

	TxSTAT = 8, RxSTAT = 9,		/* Tx and Rx status. */
@@ -40,11 +41,13 @@ enum page0_regs 
	CMR2 = 13,			/* Command register 2. */

	MODSEL = 14,		/* Mode select register. */

	MAR = 14,			/* Memory address register (?). */

    CMR2_h = 0x1d, };



enum eepage_regs

{ PROM_CMD = 6, PROM_DATA = 7 };	/* Note that PROM_CMD is in the "high" bits. */

	CMR2_h = 0x1d,

};



enum eepage_regs {

	PROM_CMD = 6,

	PROM_DATA = 7	/* Note that PROM_CMD is in the "high" bits. */

};



#define ISR_TxOK	0x01

#define ISR_RxOK	0x04
@@ -72,20 +75,24 @@ enum eepage_regs 
#define CMR2h_Normal	2	/* Accept physical and broadcast address. */

#define CMR2h_PROMISC	3	/* Promiscuous mode. */



/* An inline function used below: it differs from inb() by explicitly return an unsigned

   char, saving a truncation. */

/* An inline function used below: it differs from inb() by explicitly

 * return an unsigned char, saving a truncation.

 */

static inline unsigned char inbyte(unsigned short port)

{

	unsigned char _v;



	__asm__ __volatile__ ("inb %w1,%b0" : "=a" (_v) : "d" (port));

	return _v;

}



/* Read register OFFSET.

   This command should always be terminated with read_end(). */

 * This command should always be terminated with read_end().

 */

static inline unsigned char read_nibble(short port, unsigned char offset)

{

	unsigned char retval;



	outb(EOC+offset, port + PAR_DATA);

	outb(RdAddr+offset, port + PAR_DATA);

	inbyte(port + PAR_STATUS);	/* Settling time delay */
@@ -151,6 +158,7 @@ static inline void 
write_reg(short port, unsigned char reg, unsigned char value)

{

	unsigned char outval;



	outb(EOC | reg, port + PAR_DATA);

	outval = WrAddr | reg;

	outb(outval, port + PAR_DATA);
@@ -190,6 +198,7 @@ static inline void 
write_reg_byte(short port, unsigned char reg, unsigned char value)

{

	unsigned char outval;



	outb(EOC | reg, port + PAR_DATA); /* Reset the address register. */

	outval = WrAddr | reg;

	outb(outval, port + PAR_DATA);
@@ -205,8 +214,7 @@ write_reg_byte(short port, unsigned char reg, unsigned char value) 
	outb(EOC  | value, port + PAR_DATA); /* Reset the address register. */

}



/*

 * Bulk data writes to the packet buffer.  The interrupt line remains enabled.

/* Bulk data writes to the packet buffer.  The interrupt line remains enabled.

 * The first, faster method uses only the dataport (data modes 0, 2 & 4).

 * The second (backup) method uses data and control regs (modes 1, 3 & 5).

 * It should only be needed when there is skew between the individual data