Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 763de718 authored by Srinivas Ramana's avatar Srinivas Ramana
Browse files

ARM: dts: msm: Add ATP platform support for sdmmagpie 



sdmmagpie supports ATP platforms which are used in
automation. So add required device tree support.

Change-Id: Iba5052d776f2c977160fa2e83057a96d52e9683c
Signed-off-by: default avatarSrinivas Ramana <sramana@codeaurora.org>
parent 7e09c6da

Documentation/devicetree/bindings/arm/msm/msm.txt

+3 −2
Original line number Diff line number Diff line
@@ -79,8 +79,8 @@ Generic board variants: 
- MTP device:

  compatible = "qcom,mtp"



- IDP device:

  compatible = "qcom,idp"

- ATP device:

  compatible = "qcom,atp"



- FLUID device:

  compatible = "qcom,fluid"
@@ -196,6 +196,7 @@ compatible = "qcom,sdxprairie-mtp" 
compatible = "qcom,sdxprairie-cdp"

compatible = "qcom,sdmmagpie-rumi"

compatible = "qcom,sdmmagpie-idp"

compatible = "qcom,sdmmagpie-atp"

compatible = "qcom,sdmmagpie-qrd"

compatible = "qcom,sdmmagpiep-idp"

compatible = "qcom,sdmmagpiep"

arch/arm64/boot/dts/qcom/Makefile

+3 −0
Original line number Diff line number Diff line
@@ -157,6 +157,7 @@ endif 
ifeq ($(CONFIG_BUILD_ARM64_DT_OVERLAY),y)

	dtbo-$(CONFIG_ARCH_SDMMAGPIE) += \

		sdmmagpie-idp-overlay.dtbo \

		sdmmagpie-atp-overlay.dtbo \

		sdmmagpie-rumi-overlay.dtbo \

		sdmmagpie-qrd-overlay.dtbo \

		sdmmagpiep-idp-overlay.dtbo \
@@ -165,6 +166,7 @@ ifeq ($(CONFIG_BUILD_ARM64_DT_OVERLAY),y) 
		sdmmagpie-usbc-idp-overlay.dtbo



sdmmagpie-idp-overlay.dtbo-base := sdmmagpie.dtb

sdmmagpie-atp-overlay.dtbo-base := sdmmagpie.dtb

sdmmagpie-rumi-overlay.dtbo-base := sdmmagpie.dtb

sdmmagpie-qrd-overlay.dtbo-base := sdmmagpie.dtb

sdmmagpiep-idp-overlay.dtbo-base := sdmmagpiep.dtb
@@ -174,6 +176,7 @@ sdmmagpie-usbc-idp-overlay.dtbo-base := sdmmagpie.dtb 
else

dtb-$(CONFIG_ARCH_SDMMAGPIE)	+= sdmmagpie-rumi.dtb \

	sdmmagpie-idp.dtb \

	sdmmagpie-atp.dtb \

	sdmmagpie-qrd.dtb \

	sdmmagpiep-idp.dtb \

	sdmmagpiep-qrd.dtb \

arch/arm64/boot/dts/qcom/sdmmagpie-atp-overlay.dts

0 → 100644
+31 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2018, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



/dts-v1/;

/plugin/;



#include <dt-bindings/interrupt-controller/arm-gic.h>

#include <dt-bindings/clock/qcom,camcc-sdmmagpie.h>



#include "sdmmagpie-atp.dtsi"

#include "sdmmagpie-audio-overlay.dtsi"



/ {

	model = "ATP";

	compatible = "qcom,sdmmagpie-atp", "qcom,sdmmagpie", "qcom,atp";

	qcom,msm-id = <365 0x0>;

	qcom,board-id = <33 0>;

};



&dsi_sw43404_amoled_video_display {

	qcom,dsi-display-active;

};

arch/arm64/boot/dts/qcom/sdmmagpie-atp.dts

0 → 100644
+22 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2018, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



/dts-v1/;



#include "sdmmagpie.dtsi"

#include "sdmmagpie-atp.dtsi"



/ {

	model = "Qualcomm Technologies, Inc. SDMMAGPIE PM6150 ATP";

	compatible = "qcom,sdmmagpie-atp", "qcom,sdmmagpie", "qcom,atp";

	qcom,board-id = <33 0>;

};

arch/arm64/boot/dts/qcom/sdmmagpie-atp.dtsi

0 → 100644
+387 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2018, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */

#include "sdmmagpie-thermal-overlay.dtsi"



#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>

#include <dt-bindings/iio/qcom,spmi-vadc.h>

#include <dt-bindings/input/input.h>

#include "sdmmagpie-sde-display.dtsi"

#include "sdmmagpie-camera-sensor-idp.dtsi"



&soc {

	mtp_batterydata: qcom,battery-data {

		qcom,batt-id-range-pct = <15>;

		#include "qg-batterydata-alium-3600mah.dtsi"

		#include "qg-batterydata-mlp466076-3200mah.dtsi"

	};

};



&qupv3_se8_2uart {

	status = "ok";

};



&qupv3_se3_4uart {

	status = "ok";

};



&ufsphy_mem {

	compatible = "qcom,ufs-phy-qmp-v3";



	vdda-phy-supply = <&pm6150_l4>; /* 0.88v */

	vdda-pll-supply = <&pm6150l_l3>; /* 1.2v */

	vdda-phy-max-microamp = <62900>;

	vdda-pll-max-microamp = <18300>;



	status = "ok";

};



&ufshc_mem {

	vdd-hba-supply = <&ufs_phy_gdsc>;

	vdd-hba-fixed-regulator;

	vcc-supply = <&pm6150_l19>;

	vcc-voltage-level = <2950000 2960000>;

	vccq2-supply = <&pm6150_l12>;

	vcc-max-microamp = <600000>;

	vccq2-max-microamp = <600000>;



	qcom,vddp-ref-clk-supply = <&pm6150l_l3>;

	qcom,vddp-ref-clk-max-microamp = <100>;



	status = "ok";

};



&qupv3_se2_i2c {

	status = "ok";

	qcom,clk-freq-out = <1000000>;

	nq@28 {

		compatible = "qcom,nq-nci";

		reg = <0x28>;

		qcom,nq-irq = <&tlmm 37 0x00>;

		qcom,nq-ven = <&tlmm 12 0x00>;

		qcom,nq-firm = <&tlmm 36 0x00>;

		qcom,nq-clkreq = <&tlmm 31 0x00>;

		qcom,nq-esepwr = <&tlmm 94 0x00>;

		interrupt-parent = <&tlmm>;

		interrupts = <37 0>;

		interrupt-names = "nfc_irq";

		pinctrl-names = "nfc_active", "nfc_suspend";

		pinctrl-0 = <&nfc_int_active &nfc_enable_active

				&nfc_clk_req_active>;

		pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend

				&nfc_clk_req_suspend>;

	};

};



&sdhc_1 {

	vdd-supply = <&pm6150_l19>;

	qcom,vdd-voltage-level = <2950000 2950000>;

	qcom,vdd-current-level = <0 570000>;



	vdd-io-supply = <&pm6150_l12>;

	qcom,vdd-io-always-on;

	qcom,vdd-io-lpm-sup;

	qcom,vdd-io-voltage-level = <1800000 1800000>;

	qcom,vdd-io-current-level = <0 325000>;



	pinctrl-names = "active", "sleep";

	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;

	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;



	status = "ok";

};



&sdhc_2 {

	vdd-supply = <&pm6150l_l9>;

	qcom,vdd-voltage-level = <2950000 2950000>;

	qcom,vdd-current-level = <0 800000>;



	vdd-io-supply = <&pm6150l_l6>;

	qcom,vdd-io-voltage-level = <1800000 2950000>;

	qcom,vdd-io-current-level = <0 22000>;



	pinctrl-names = "active", "sleep";

	pinctrl-0 = <&sdc2_clk_on  &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;

	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;



	cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;



	status = "ok";

};



&dsi_sw43404_amoled_video {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_labibb_amoled>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,mdss-dsi-bl-min-level = <1>;

	qcom,mdss-dsi-bl-max-level = <1023>;

	qcom,platform-te-gpio = <&tlmm 10 0>;

	qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>;

};



&dsi_sw43404_amoled_cmd {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_labibb_amoled>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,mdss-dsi-bl-min-level = <1>;

	qcom,mdss-dsi-bl-max-level = <1023>;

	qcom,platform-te-gpio = <&tlmm 10 0>;

	qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>;

};



&dsi_sw43404_amoled_fhd_plus_cmd {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_labibb_amoled>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,mdss-dsi-bl-min-level = <1>;

	qcom,mdss-dsi-bl-max-level = <1023>;

	qcom,platform-te-gpio = <&tlmm 10 0>;

	qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>;

};



&dsi_dual_sharp_wqhd_video {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,mdss-dsi-bl-min-level = <1>;

	qcom,mdss-dsi-bl-max-level = <4095>;

	qcom,platform-te-gpio = <&tlmm 10 0>;

	qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>;

	qcom,platform-en-gpio = <&pm6150l_gpios 4 0>;

	qcom,platform-bklight-en-gpio = <&pm6150l_gpios 5 0>;

};



&dsi_dual_sharp_wqhd_cmd {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,mdss-dsi-bl-min-level = <1>;

	qcom,mdss-dsi-bl-max-level = <4095>;

	qcom,platform-te-gpio = <&tlmm 10 0>;

	qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>;

	qcom,platform-en-gpio = <&pm6150l_gpios 4 0>;

	qcom,platform-bklight-en-gpio = <&pm6150l_gpios 5 0>;

};



&dsi_rm69298_truly_amoled_video {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_labibb_amoled>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,mdss-dsi-bl-min-level = <1>;

	qcom,mdss-dsi-bl-max-level = <255>;

	qcom,platform-te-gpio = <&tlmm 10 0>;

	qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>;

};



&dsi_rm69298_truly_amoled_cmd {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_labibb_amoled>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,mdss-dsi-bl-min-level = <1>;

	qcom,mdss-dsi-bl-max-level = <255>;

	qcom,platform-te-gpio = <&tlmm 10 0>;

	qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>;

};



&dsi_sim_cmd {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>;

};



&dsi_sim_vid {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>;

};



&dsi_dual_sim_cmd {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>;

};



&dsi_dual_sim_vid {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>;

};



&dsi_sim_dsc_375_cmd {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>;

};



&dsi_dual_sim_dsc_375_cmd {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>;

};



&dsi_nt35695b_truly_fhd_video {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>;

	qcom,panel-sec-supply-entries = <&dsi_panel_pwr_supply_no_labibb>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,platform-reset-gpio = <&pm6150l_gpios 11 0>;

	qcom,platform-sec-reset-gpio = <&pm6150l_gpios 11 0>;

	qcom,platform-en-gpio = <&pm6150l_gpios 4 0>;

	qcom,platform-bklight-en-gpio = <&pm6150l_gpios 5 0>;

};



&dsi_nt35695b_truly_fhd_cmd {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>;

	qcom,panel-sec-supply-entries = <&dsi_panel_pwr_supply_no_labibb>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,platform-reset-gpio = <&pm6150l_gpios 11 0>;

	qcom,platform-sec-reset-gpio = <&pm6150l_gpios 11 0>;

	qcom,platform-en-gpio = <&pm6150l_gpios 4 0>;

	qcom,platform-bklight-en-gpio = <&pm6150l_gpios 5 0>;

	qcom,platform-te-gpio = <&tlmm 11 0>;

};



&sde_dp {

	qcom,dp-aux-switch = <&fsa4480>;

};



&qupv3_se7_i2c {

	status = "ok";

	st_fts@49 {

		compatible = "st,fts";

		reg = <0x49>;

		interrupt-parent = <&tlmm>;

		interrupts = <9 0x2008>;

		vdd-supply = <&pm6150_l10>;

		avdd-supply = <&pm6150l_l7>;

		pinctrl-names = "pmx_ts_active", "pmx_ts_suspend",

					"pmx_ts_release";

		pinctrl-0 = <&ts_active>;

		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;

		pinctrl-2 = <&ts_release>;

		st,irq-gpio = <&tlmm 9 0x2008>;

		st,reset-gpio = <&tlmm 8 0x00>;

		st,regulator_dvdd = "vdd";

		st,regulator_avdd = "avdd";

		st,x-flip;

		st,y-flip;

	};

};



&pm6150_qg {

	qcom,battery-data = <&mtp_batterydata>;

	qcom,qg-iterm-ma = <100>;

	qcom,hold-soc-while-full;

	qcom,linearize-soc;

	qcom,cl-feedback-on;

};



&pm6150_charger {

	io-channels = <&pm6150_vadc ADC_USB_IN_V_16>,

		      <&pm6150_vadc ADC_USB_IN_I>,

		      <&pm6150_vadc ADC_CHG_TEMP>,

		      <&pm6150_vadc ADC_DIE_TEMP>,

		      <&pm6150l_vadc ADC_AMUX_THM1_PU2>,

		      <&pm6150_vadc ADC_SBUx>,

		      <&pm6150_vadc ADC_VPH_PWR>;

	io-channel-names = "usb_in_voltage",

			   "usb_in_current",

			   "chg_temp",

			   "die_temp",

			   "conn_temp",

			   "sbux_res",

			   "vph_voltage";

	qcom,battery-data = <&mtp_batterydata>;

	qcom,auto-recharge-soc = <98>;

	qcom,step-charging-enable;

	qcom,sw-jeita-enable;

	qcom,fcc-stepping-enable;

	qcom,suspend-input-on-debug-batt;

	qcom,sec-charger-config = <3>;

	qcom,thermal-mitigation = <4200000 3500000 3000000

			2500000 2000000 1500000 1000000 500000>;

	dpdm-supply = <&qusb_phy0>;

};



&pm6150_gpios {

	smb_stat {

		smb_stat_default: smb_stat_default {

			pins = "gpio3";

			function = "normal";

			input-enable;

			bias-pull-up;

			qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;

			power-source = <0>;

		};

	};

};



&qupv3_se9_i2c {

	status = "ok";

	#include "smb1390.dtsi"

	#include "smb1355.dtsi"

};



&smb1355 {

	/delete-property/ interrupts;

	interrupts = <0x0 0xc2 0x0 IRQ_TYPE_LEVEL_LOW>;

	status = "ok";

};



&smb1355_charger {

	status = "ok";

};



&smb1390 {

	/delete-property/ interrupts;

	interrupts = <0x0 0xc2 0x0 IRQ_TYPE_LEVEL_LOW>;

	pinctrl-names = "default";

	pinctrl-0 = <&smb_stat_default>;

	status = "ok";

};



&smb1390_charger {

	compatible = "qcom,smb1390-charger-psy";

	io-channels = <&pm6150l_vadc ADC_AMUX_THM2>;

	io-channel-names = "cp_die_temp";

	status = "ok";

};



&pm6150l_gpios {

	key_vol_up {

		key_vol_up_default: key_vol_up_default {

			pins = "gpio2";

			function = "normal";

			input-enable;

			bias-pull-up;

			power-source = <0>;

		};

	};

};



&soc {

	gpio_keys {

		compatible = "gpio-keys";

		label = "gpio-keys";



		pinctrl-names = "default";

		pinctrl-0 = <&key_vol_up_default>;



		vol_up {

			label = "volume_up";

			gpios = <&pm6150l_gpios 2 GPIO_ACTIVE_LOW>;

			linux,input-type = <1>;

			linux,code = <KEY_VOLUMEUP>;

			linux,can-disable;

			debounce-interval = <15>;

			gpio-key,wakeup;

		};

	};

};



&thermal_zones {

	quiet-therm-step {

		status = "disabled";

	};

};