Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 75819f01 authored by Jean Delvare's avatar Jean Delvare Committed by Mark M. Hoffman
Browse files

hwmon/ds1621: Minor cleanups 



* Discard comments which do not apply or are redundant.
* Remove a few useless instructions.
* Rename new_client to just client.

Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
parent e4a7167f

drivers/hwmon/ds1621.c

+19 −32
Original line number Diff line number Diff line
@@ -63,10 +63,7 @@ MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low") 
#define DS1621_ALARM_TEMP_HIGH		0x40

#define DS1621_ALARM_TEMP_LOW		0x20



/* Conversions. Rounding and limit checking is only done on the TO_REG

   variants. Note that you should be a bit careful with which arguments

   these macros are called: arguments may be evaluated more than once.

   Fixing this is just not worth it. */

/* Conversions */

#define ALARMS_FROM_REG(val) ((val) & \

                              (DS1621_ALARM_TEMP_HIGH | DS1621_ALARM_TEMP_LOW))
@@ -101,7 +98,7 @@ static struct i2c_driver ds1621_driver = { 


/* All registers are word-sized, except for the configuration register.

   DS1621 uses a high-byte first convention, which is exactly opposite to

   the usual practice. */

   the SMBus standard. */

static int ds1621_read_value(struct i2c_client *client, u8 reg)

{

	if (reg == DS1621_REG_CONF)
@@ -110,9 +107,6 @@ static int ds1621_read_value(struct i2c_client *client, u8 reg) 
		return swab16(i2c_smbus_read_word_data(client, reg));

}



/* All registers are word-sized, except for the configuration register.

   DS1621 uses a high-byte first convention, which is exactly opposite to

   the usual practice. */

static int ds1621_write_value(struct i2c_client *client, u8 reg, u16 value)

{

	if (reg == DS1621_REG_CONF)
@@ -204,7 +198,7 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address, 
			 int kind)

{

	int conf, temp;

	struct i2c_client *new_client;

	struct i2c_client *client;

	struct ds1621_data *data;

	int err = 0;
@@ -221,55 +215,48 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address, 
		goto exit;

	}

	

	new_client = &data->client;

	i2c_set_clientdata(new_client, data);

	new_client->addr = address;

	new_client->adapter = adapter;

	new_client->driver = &ds1621_driver;

	new_client->flags = 0;



	client = &data->client;

	i2c_set_clientdata(client, data);

	client->addr = address;

	client->adapter = adapter;

	client->driver = &ds1621_driver;



	/* Now, we do the remaining detection. It is lousy. */

	if (kind < 0) {

		/* The NVB bit should be low if no EEPROM write has been 

		   requested during the latest 10ms, which is highly 

		   improbable in our case. */

		conf = ds1621_read_value(new_client, DS1621_REG_CONF);

		conf = ds1621_read_value(client, DS1621_REG_CONF);

		if (conf & DS1621_REG_CONFIG_NVB)

			goto exit_free;

		/* The 7 lowest bits of a temperature should always be 0. */

		temp = ds1621_read_value(new_client, DS1621_REG_TEMP);

		temp = ds1621_read_value(client, DS1621_REG_TEMP);

		if (temp & 0x007f)

			goto exit_free;

		temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MIN);

		temp = ds1621_read_value(client, DS1621_REG_TEMP_MIN);

		if (temp & 0x007f)

			goto exit_free;

		temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MAX);

		temp = ds1621_read_value(client, DS1621_REG_TEMP_MAX);

		if (temp & 0x007f)

			goto exit_free;

	}



	/* Determine the chip type - only one kind supported! */

	if (kind <= 0)

		kind = ds1621;



	/* Fill in remaining client fields and put it into the global list */

	strlcpy(new_client->name, "ds1621", I2C_NAME_SIZE);

	data->valid = 0;

	strlcpy(client->name, "ds1621", I2C_NAME_SIZE);

	mutex_init(&data->update_lock);



	/* Tell the I2C layer a new client has arrived */

	if ((err = i2c_attach_client(new_client)))

	if ((err = i2c_attach_client(client)))

		goto exit_free;



	/* Initialize the DS1621 chip */

	ds1621_init_client(new_client);

	ds1621_init_client(client);



	/* Register sysfs hooks */

	if ((err = sysfs_create_group(&new_client->dev.kobj, &ds1621_group)))

	if ((err = sysfs_create_group(&client->dev.kobj, &ds1621_group)))

		goto exit_detach;



	data->class_dev = hwmon_device_register(&new_client->dev);

	data->class_dev = hwmon_device_register(&client->dev);

	if (IS_ERR(data->class_dev)) {

		err = PTR_ERR(data->class_dev);

		goto exit_remove_files;
@@ -278,9 +265,9 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address, 
	return 0;



      exit_remove_files:

	sysfs_remove_group(&new_client->dev.kobj, &ds1621_group);

	sysfs_remove_group(&client->dev.kobj, &ds1621_group);

      exit_detach:

	i2c_detach_client(new_client);

	i2c_detach_client(client);

      exit_free:

	kfree(data);

      exit: