Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 72ac40fc authored by Dave Gerlach's avatar Dave Gerlach Committed by Tony Lindgren
Browse files

ARM: dts: am33xx: Add updated operating-points-v2 table for cpu 



After the ti-cpufreq driver has been added, we can now drop the
operating-points table present in am33xx.dtsi for the cpu and add an
operating-points-v2 table with all OPPs available for all silicon
revisions. Also add necessary data for use by ti-cpufreq to selectively
enable the appropriate OPPs at runtime as part of the operating-points
table.

Information from AM335x Data Manual, SPRS717i, Revised December 2015,
Table 5-7.

Signed-off-by: default avatarDave Gerlach <d-gerlach@ti.com>
eviewed-by: default avatarLukasz Majewski <lukma@denx.de>
Acked-by: default avatarViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 9f6b5728

arch/arm/boot/dts/am33xx.dtsi

+74 −13
Original line number Diff line number Diff line
@@ -46,19 +46,7 @@ 
			device_type = "cpu";

			reg = <0>;



			/*

			 * To consider voltage drop between PMIC and SoC,

			 * tolerance value is reduced to 2% from 4% and

			 * voltage value is increased as a precaution.

			 */

			operating-points = <

				/* kHz    uV */

				720000  1285000

				600000  1225000

				500000  1125000

				275000  1125000

			>;

			voltage-tolerance = <2>; /* 2 percentage */

			operating-points-v2 = <&cpu0_opp_table>;



			clocks = <&dpll_mpu_ck>;

			clock-names = "cpu";
@@ -67,6 +55,79 @@ 
		};

	};



	cpu0_opp_table: opp-table {

		compatible = "operating-points-v2-ti-cpu";

		syscon = <&scm_conf>;



		/*

		 * The three following nodes are marked with opp-suspend

		 * because the can not be enabled simultaneously on a

		 * single SoC.

		 */

		opp50@300000000 {

			opp-hz = /bits/ 64 <300000000>;

			opp-microvolt = <950000 931000 969000>;

			opp-supported-hw = <0x06 0x0010>;

			opp-suspend;

		};



		opp100@275000000 {

			opp-hz = /bits/ 64 <275000000>;

			opp-microvolt = <1100000 1078000 1122000>;

			opp-supported-hw = <0x01 0x00FF>;

			opp-suspend;

		};



		opp100@300000000 {

			opp-hz = /bits/ 64 <300000000>;

			opp-microvolt = <1100000 1078000 1122000>;

			opp-supported-hw = <0x06 0x0020>;

			opp-suspend;

		};



		opp100@500000000 {

			opp-hz = /bits/ 64 <500000000>;

			opp-microvolt = <1100000 1078000 1122000>;

			opp-supported-hw = <0x01 0xFFFF>;

		};



		opp100@600000000 {

			opp-hz = /bits/ 64 <600000000>;

			opp-microvolt = <1100000 1078000 1122000>;

			opp-supported-hw = <0x06 0x0040>;

		};



		opp120@600000000 {

			opp-hz = /bits/ 64 <600000000>;

			opp-microvolt = <1200000 1176000 1224000>;

			opp-supported-hw = <0x01 0xFFFF>;

		};



		opp120@720000000 {

			opp-hz = /bits/ 64 <720000000>;

			opp-microvolt = <1200000 1176000 1224000>;

			opp-supported-hw = <0x06 0x0080>;

		};



		oppturbo@720000000 {

			opp-hz = /bits/ 64 <720000000>;

			opp-microvolt = <1260000 1234800 1285200>;

			opp-supported-hw = <0x01 0xFFFF>;

		};



		oppturbo@800000000 {

			opp-hz = /bits/ 64 <800000000>;

			opp-microvolt = <1260000 1234800 1285200>;

			opp-supported-hw = <0x06 0x0100>;

		};



		oppnitro@1000000000 {

			opp-hz = /bits/ 64 <1000000000>;

			opp-microvolt = <1325000 1298500 1351500>;

			opp-supported-hw = <0x04 0x0200>;

		};

	};



	pmu {

		compatible = "arm,cortex-a8-pmu";

		interrupts = <3>;